Beruflich Dokumente
Kultur Dokumente
Maintenance Frequency
Check
Description Procedure
Daily Weekly Quarterly Annually
Cooling tower use and sequencing Turn off or sequence unnecessary cooling towers (For Multiple units) X
Complete overall visual inspection to be sure all equipment is operating and that
Overall visual inspection X
systems are in place.
Fan motor condition Check the condition of the fan motor through temperature or excessive vibration X
Operate make-up water float switch Operate switch manually to ensure proper operation. X
Check water condition Check water condition and top-up or re-fresh when necessary X
Check & Clean Y-strainer Clear out all debris collected in Y-strainers to improve water flow X
Check lubrication Assure that all bearings are lubricated per the manufacturer's recommendation. X
Check motor supports and fan blades Check for excessive wear and secure fastening. X
Motor alignment Align the motor coupling to allow for efficient torque transfer. X
Check louvers, and in-fill Look for proper positioning and scale buildup. X
Clean tower Remove all dust, scale, and algae from tower basin, fill, and spray nozzles. X
Check bearings Inspect bearings and drive belts for wear. Adjust, repair, or replace as necessary. X