Beruflich Dokumente
Kultur Dokumente
DESCRIPTION PROPERTIES
MASTERFLEX 610 is a hydroswelling waterbar, ready Type Type 2 Type 3H
for installation in joints to render the joints leakproof. It is Swelling rate (%) JIS K 7112 120 300
based on a blend of natural & synthetic rubbers and a Specific gravity JIS K 6350 1.20 1.18
unique hydroswelling polymer that acts by swelling on
exposure to water, to form a seal. HARDNESS (HS) JIS K 6301 (A) 47 43
Tensile strength (N/mm2) JIS K 6 5
Masterflex 610 is available in below-mentioned sizes : 6301
Size Cross section Elongation (%) JIS K 6301 600 1000
Type : Type 3H
Size : 20 mm x 10 mm x 20 mm
Temperature : 25oC
350
Swelling rate in voume (%)
300
250
200
FEATURES AND BENEFITS
150
Swells in contact with Prevents water ingress even Distilled water
water by up to 270% when the joint width varies. 100
1% Cement Solution
Water molecules held Captured water does not get 50 3% NaCl
by molecular attraction transported through 0
capillaries. 0 20 40 60 80
Controlled swelling Minimise the risk of damage Immersion duration (days)
to concrete
Does not form foam or Durable seal. No air bubbles
gas with water to breakdown and allow
leaks.
The technical information and application advice given in this BASF Construction Chemicals publication are
STATEMENT OF based on the present state of our best scientific and practical knowledge. As the information herein is of a
general nature, no assumption can be made as to a product's suitability for a particular use or application and
RESPONSIBILITY no warranty as to its accuracy, reliability or completeness either expressed or implied is given other than
those required by law. The user is responsible for checking the suitability of products for their intended use.
NOTE Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF
Construction Chemicals either orally or in writing may be followed, modified or rejected by the owner,
engineer or contractor since they, and not BASF Construction Chemicals, are responsible for carrying out
procedures appropriate to a specific application.