Beruflich Dokumente
Kultur Dokumente
P R O F E S S I O N A L P A R T N E R
SECURE BASE
Case TX telescopic handlers offer impressive stability through a
combination of a long wheelbase, low boom pivot point and optimised
counterweight. Machines up to 3 ton capacity can lift without the need
for stabilisers, while heavy duty machines offer narrow ( ie: within the
width of machine) stabiliser legs on models with up to 3.3 ton or 4.3
ton lift capacity, and wide ( ie: “butterfly” spread) stabilisers for maximum
strength on 4.5 ton handlers.
Total stability. Maximum lift capacity.
POWER TO WORK
The TX telehandler range is powered by high output Case engines, offering
80 hp and 95 hp on TX130-30 and TX130-33 models and now 118 hp from
a new climate friendly Tier III low emissions engine in the TX130-40 and
above. This engine combines low fuel consumption with a strong 516 Nm
of torque, enough to pull the machine through the toughest of site conditions.
All engines are mounted longitudinally on the side of the machine, for a
maximum transfer of power and ease of service.
High output. Low emissions and consumption.
REACHING HIGH
Robust boom construction with powerful hydraulic cylinders, or
chain extension on some 13 m models, offers excellent range of
working heights up to 17 m. Hydraulic frame levelling, along with
audible and visual safe load indication ensures secure placing of
loads at any height or reach.
Design integrity. Maximum capacity.
2
ALL TERRAIN CAPABILITY
Powershift transmissions handle high power delivery without heat build-up. Smooth
gear shifting and three steering modes ensure that the operator can work in the
toughest site conditions. Four wheel steering greatly reduces turning circle, while
crab steer offers the perfect solution when working against obstacles.
Outstanding manoeuvrability. Reliable components.
TOTAL CONTROL
With standard pilot controls for all hydraulic functions the Case TX
telehandler is an easy machine to drive. Load sensing, flow sharing
hydraulics, in combination with a smooth Powershift transmission,
ensure independent movement of all hydraulic functions, with precision
and accuracy. Low effort control levers reduce operator fatigue, ensuring
high productivity and maximum safety throughout the working day.
Smooth operation. Precision control.
MAINTENANCE ACCESS
Side-mounted engine with full length lift-up canopy ensures access
for ground level servicing and regular maintenance. All filters and fill
points easily accessible, for minimum downtime and maximum
productivity. Main hydraulic valve mounted at the rear of the machine,
can be reached through separate panel without having to move other
components.
Design integrity. Minimum downtime.
ATTACHMENT CARRIER
Case dealers offer a wide range of options, tyres and attachments to perfectly customise the machine to your individual
requirements. Mechanical or hydraulic carriers can be specified along with optional sideshift capability. Customers can choose
a carrier compatible with Case attachments or one designed to fit their existing buckets and work tools. Attachments include
pallet forks, 4-in-1 buckets, crane booms, road sweepers, cement mixers and a range of personnel platforms, with or without
radio control.
Multiple use. Versatility built-in.
3
The TX range uses robust telescopic booms with inherent rigidity
TWO TELESCOPIC DESIGNS and strength to allow many hours of safe lifting. The TX130-30
and TX130-33 have a chain driven extension for the second boom
section, while all larger machines use an internally mounted hydraulic
twin cylinder to extend the boom. All models are equipped with
safety valves on the lift, tilt and stabiliser cylinders, to prevent the
boom dropping in the case of hose failure.
Visual and audible warning devices signaling overload are
incorporated in the upper right corner of all cabs. On TX130-40
and above models, a strict safety device automatically prevents
any hazardous extension of the mast.This feature makes the TX130-
40 and above models suitable for the use of man platforms . Case
provides a complete range of man baskets, fixed , orientable or
even remotely radio controlled for tasks requiring to carry personnel.
4
OPERATOR’S CAB
From its initial conception the Case telehandler cab
has led the field in terms of ergonomics, visibility
and safety. Its curved top with wrap around glazing
offers unparalleled visibility of the boom and the
load. A glazed door, with opening window, provides
easy access to the cab and the deep glass, low
engine canopy and low boom pivot point ensure an
excellent view all around the machine. This is a
major contributing factor to increased site safety
and prevents damage to the machine when
manoeuvring in confined spaces. All instruments
are placed in a low level console to further boost
visibility to the front of the machine. Simple, single
lever servo controls are easy to use and the
operator has plenty of space in the ROPS/FOPS
cab to remain comfortable throughout the day.
5
The TX telescopic handler range is powered by a 4.5 litre Case
ENGINE engine, naturally aspirated or "turbo" on the TX130-30/TX130-
30 turbo and TX130-33/TX130-33 turbo. All larger machines
are equipped with a low emission Tier III climate friendly engine,
that with turbocharging and aftercooling offers a healthy 118
hp and a powerful 516 Nm of torque.
Mounted on the side of the machine, the engine is easily accessible
for all regular service and maintenance work, with filters and fill
points all reached from ground level. Long service intervals and
compatibility with the Case electronic service tool (EST) ensure
minimum downtime, increasing profitability and keeping your
machines at work.
6
7
8
9
SPECIFICATIONS TRANSMISSION
Type ______________________________________Powershift
Forward/Reverse speeds _________________________4/3
TX130-30 TX130-33 Maximum speed on road** ___________________34 km/h
without stabilizers with narrow stabilisers
HYDRAULIC SYSTEM
ENGINE Type ____________________________________Load Sensing
Make __________________________________CNH 4NA 4.5 Hydraulic controls_______________________________Servo
Power ________________________________60 kW / 80 hp Simultaneous movement ___________________________yes
Type________________________________Natural Aspiration Hydraulic pump __________________________________gear
Total displacement _______________________________4.5 l Hydraulic flow ______________________________115 l/min
Maximum torque __________________ 320 Nm @1400 rpm Hydraulic pressure ___________________________240 bar
TRANSMISSION CAPACITIES
Type ______________________________________Powershift Fuel tank ______________________________________135 l
Forward/Reverse speeds _________________________4/3 Hydraulic tank _________________________________ 180 l
Maximum speed on road** ___________________28 km/h
TYRES
HYDRAULIC SYSTEM 15.5 x 22.5 ________________________________MICHELIN
Type ____________________________________Load Sensing 400/80 x 20_______________________________SOLIDEAL
Hydraulic controls_______________________________Servo 400/80 x 24________________________________DUNLOP
Simultaneous movement ___________________________yes 400/70 x 20__________________________________MITAS
Hydraulic pump __________________________________gear
Hydraulic flow ______________________________ 115 l/min ** Max. speed limited according to the country’s legislations
Hydraulic pressure ___________________________240 bar
CAPACITIES
Fuel tank ______________________________________135 l
Hydraulic tank _________________________________ 180 l TX130-30 TX130-33
TYRES 13
50° 60° 70° 40°
13
50° 60° 70°
400/80 x 20_______________________________SOLIDEAL 11 11
400/80 x 24________________________________DUNLOP 10 10
8 8
3300 kg
TX130-30 TX130-30 7 7
3000 kg
2500 kg
3000 kg
20°
2500 kg
Turbo Turbo 6
2000 kg
6
20°
2000 kg
1500 kg
1500 kg
800 kg
4 4
600 kg
ENGINE 10°
400 kg
1150 kg
10° 3
3
Power ________________________________71 kW / 95 hp 0°
1
0°
1
Type __________________________________________Turbo 0 0
DIMENSIONS A B C D E F G H I K T U V V1 V2 W
With 24” rims 1200 3120 1730 5900 1000 2050 402 2450 1050 1260 4600 2730 5445 980 3890 2445
With 20” rims 1200 3120 1730 5900 1000 2040 390 2435 1050 1260 4600 2715 5445 980 3890 2445
10
SPECIFICATIONS
TX130-40 TX130-43 TX130-45
without stabilizers with narrow stabilizers with wide stabilizers
13 12
12
12 11
11
30° 30°
11
10 10
30°
10
9 9
9
8 8
20° 8 20°
4500 kg
4000 kg
4000 kg
7 7
3200 kg
20° 7
2600 kg
6
4300 kg
6
2000 kg
3600 kg
6
4000 kg
1600 kg
3600 kg
5
1300 kg
3200 kg
10° 5 10°
1000 kg
3000 kg
2500 kg
2500 kg
2000 kg
4 10° 4
700 kg
1800 kg
1800 kg
3
1400 kg
3
3
2
o 2 0°
0 2
0°
1
1
1
0
0
0
- -10°
-
10 -110 -10° -1 1
9 8 7 6 5 4 3 2 1 0m 10 9 8 7 6 5 4 3 2 1 0m 10 9 8 7 6 5 4 3 2 1 0m
DIMENSIONS A B C D E F G H I K T U V V1 V2 W
(with MITAS 405/70x24)
mm 1200 3120 1617 5850 1000 2050 402 2450 1100 1260 4396 2730 5204 980 3890 2445
11
SPECIFICATIONS
TX140-43 TX140-45
with narrow stabilizers with wide stabilizers
ENGINE
Make ________________________TIER 3 - Turbo after cooled TX140-43
Power ________________________________88 kW/118 hp 40° 50° 60°
Type ___________________________________________4AA 14 m
12
Maximum torque __________________ 516 Nm @1400 rpm 11
EST (electronic service tool) __________________Compatible 30°
10
TRANSMISSION 8
20°
Type ______________________________________Powershift 7
4300 kg
6
Forward/Reverse speeds _________________________4/3
4000 kg
3600 kg
5
Maximum speed on road** ___________________ 35 km/h
3000 kg
2500 kg
2000 kg
10° 4
1800 kg
** Max. speed limited according to the country’s legislations
1400 kg
3
2
0°
HYDRAULIC SYSTEM 1
-10° -1
Hydraulic controls_______________________________Servo 10 9 8 7 6 5 4 3 2 1 0m
13
CAPACITIES 12
3600 kg
8
TYRES
4000 kg
4500 kg
3000 kg
20°
7
2500 kg
13.00 x 24 _______________________________GOOD-YEAR 6
2000 kg
15.5 x 25 __________________________________MICHELIN 5
1800 kg
10°
405/70 x 24__________________________________MITAS 4
1500 kg
400/80 x 24________________________________DUNLOP 3
2
0°
NOISE 0
DIMENSIONS A B C D E F G H I K T U V V1 V2 W
(with MITAS 405/70x24)
mm 1200 3120 1902 6135 1000 2050 402 2450 1100 1260 4598 2730 5445 980 3890 2445
12
13
SPECIFICATIONS
TX170-45
ENGINE TX170-45
Make ________________________TIER 3 - Turbo after cooled
Power _______________________________88 kW / 118 hp 40°
17 m
50° 60°
Type ___________________________________________4AA 16
15
Total displacement _______________________________4.5 l 14
30° 12
EST (electronic service tool) __________________Compatible
11
10
TRANSMISSION 20°
9
8
Type ______________________________________Powershift
4000 kg
7
3500 kg
Forward/Reverse speeds _________________________4/3
3000 kg
6
2000 kg
1500 kg
10° 5
Maximum speed on road** ___________________35 km/h
1000 kg
700 kg
4
500 kg
250 kgkg
100 kg
3
250
kg kg
2
0°
00
1
HYDRAULIC SYSTEM 0
Hydraulic controls_______________________________Servo
Simultaneous movement ___________________________yes
Hydraulic pump __________________________________gear
Hydraulic flow ______________________________115 l/min
Hydraulic pressure ___________________________240 bar
40° 50° 60°
17 m
CAPACITIES 16
14
Hydraulic tank __________________________________180 l 13
30°
12
TYRES 11
10
4000 kg
13.00 x 24 _______________________________GOOD-YEAR
3500 kg
9
3000 kg
20°
8
15.5 X 25__________________________________MICHELIN
2500 kg
4500 kg
7
2000 kg
405/70 x 24__________________________________MITAS 6
1500 kg
1000 kg
4
450 kg
NOISE 0°
2
External_____________________________________103 LpA -1
-10° 13 12 11 10 9 8 7 6 5 4 3 2 1 0m
EN 1459/B
DIMENSIONS A B C D E F G H I K T U V V1 V2 W
(with MITAS 405/70x24)
mm 1200 3120 1902 6135 1000 2050 402 2450 1100 1260 4598 2730 5445 980 3890 2445
14
15
TX130-30/TX130-33
TX130-40/TX130-43
TX130-45/TX140-43
TX140-45/TX170-45
Worldwide Case Construction NOTE: Standard and optional fittings Case Construction Equipment
Equipment Contact Information can vary according to the demands CNH UK Ltd.
EUROPE/AFRICA/MIDDLE EAST: and specific regulations of each Armstrong House
Centre D’affaires EGB country. The illustrations may The Finningley Estate
5, Avenue Georges Bataille - BP 40401 include optional rather than Hayfield Lane
60671 Le Plessis-Belleville - FRANCE standard fittings - consult your Case Doncaster
dealer. Furthermore, CNH reserves DN9 3XA
NORTH AMERICA/MEXICO: the right to modify machine Fax +44 (0)1302 802126
700 State Street specifications without incurring any
Racine, WI 53404 U.S.A. obligation relating to such changes.
LATIN AMERICA: www.casece.com
Av. General David Sarnoff 2237
32210 - 900 Contagem - MG
Belo Horizonte BRAZIL
ASIA PACIFIC:
Unit 1 - 1 Foundation Place - Prospect
New South Wales - 2148 AUSTRALIA
CHINA:
No. 29, Industrial Premises, No. 376.
De Bao Road, Waigaoqiao Ftz, Pudong,
SHANGHAI, 200131, P.R.C. Conforms to directive 98/37/CE