Beruflich Dokumente
Kultur Dokumente
Bill of Quantities
Painting two coats on kerbs in black and white or yellow after filling the surface
5.1 with synthetic enamel paint complete as per drawing and Technical specifications Sqm
and as directed by the Engineer-in-charge.
Providing and fixing the Tar paper bearing complete as per drawing and Technical
5.11 Sqm
specifications and as directed by the Engineer-in-charge.
Providing and laying of Filter media behind walls of box with granular
materials/stone crushed aggregates satisfying the requirements laid down in
clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm
5.17 with smaller size towards the soil and bigger size towards the wall and provided Cum 45,874
over the entire surface behind abutment, wing wall and return wall to the full
height compacted to a firm condition complete as per drawing and Technical
specifications and as directed by the Engineer-in-charge.
Providing and laying Filter material underneath pitching in slopes complete as
5.18 per drawing and Technical specifications and as directed by the Engineer-in- Cum
charge.
Providing and laying Stone Pitching on slopes laid over prepared filter media
5.19 including boulder apron laid dry in front of toe of embankment complete as per Cum
drawing and Technical specifications and as directed by the Engineer-in-charge.
Back filling with granular material behind box culvert, wing walls and return
5.2 walls complete as per drawing and Technical Specification clause 710.1.4.of Cum 1,457.27
IRC:78 & 2200
Printing of culvert No. and span arrangement of any shade with synthetic enamel
5.21 paint black or any other approved colour to give an even shade as complete as Nos
per Technical specifications and as directed by the Engineer-in-charge.
Providing and laying boulders apron on river bed for protection against scour
5.22 with stone boulders weighing not less than 40 kg each complete as per drawing cum
and Technical specifications and as directed by the Engineer-in-charge.
Provision of an Reinforced cement concrete crash barrier at the edges of the
road, approaches to bridge structures and medians, constructed with M-40 grade
concrete excluding HYSD reinforcement conforming to IRC:21 and dowel bars 25
mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler
5.23 board, keyed to the structure on which it is built and installed as per design given Cum 433.60
in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June
1994 as per dimensions in the approved drawing and at locations directed by the
Engineer, complete as per drawing and Technical specifications and as directed by
the Engineer-in-charge.
Notes: Rm
5.24 Notes:
HYSD in Crsah Barrier MT 47.70
a)Concrete shall be supplied free of cost at natural ground level at construction
5.25 M-30
site. concrete in Frictional Slab (Excluding Reinforcement) Cum 34,698.40
5.26 HYSD in Friction
b)Taking deliverySlab
of HYSD steel from Owners store. MT 3,469.84
5.27 Drainage Spouts for Box Culvert/Vup/Pup Nos 64.00
5.28 Flexible Apron for Box Culvert Cum
Rigid Apron for Box Culvert Rmtr
Providing and fixing 50 mm NB MS pipe rail with vertical stiffners, base plate and
anchor plate at spacing mentioned in drawings on crash barrier complete
5.29 including providing three or more coats of epoxy paint of approved colour, make Rm 322,100
and quality over a coat of epoxy primer complete as per drawings and Technical
Specifications
Bill Sections 1900 & 2703.
No 6. Pipe Culvert
Earth work in excavation for foundation of structures in ordinary soil by
mechanical means as per drawing and technical specification, including setting
6.01 out, construction of shoring and bracing, removal of stumps and other deleterious Cum
matter, dressing of sides and bottom and backfilling with approved material all
complete as per Technical specifications and as directed by the Engineer-in-
6.01a Ordinary
charge. Soil - Depth Upto 3m Cum 10,773.98
6.01 b Ordinary Rock - (not requiring blasting) Cum
6.01c Hard Rock - Require Blasting Cum
Conveying and laying Plain cement concrete in Levelling Course, mechanically
6.02 mixed and compacted, including centering and shuttering all complete as per
drawings and Technical specifications and as directed by the Engineer-in-charge.
6.02 a Notes:
PCC Grade M15 Cum 2,340.86
a)Concrete shalllaying
Conveying and be supplied free cement
Reinforced of cost at naturalof
concrete ground level mechanically
Headwall, at construction
site.
mixed and compacted, including centering and shuttering all complete as per
6.03 drawings and Technical specifications and as directed by the Engineer-in-charge.
Notes:
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
6.03 a RCC Grade M20 Cum 1,500.75
Taking delivery from Owners store including loading, fitting and placing HYSD bar
6.04 reinforcement, all complete as per drawing and Technical specifications and as
directed by the Engineer-in-charge.
6.04 a For Foundation / Substructure / Superstructure MT 27.96
Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for
culverts on cement craddle bedding of PCC M15 in single row including fixing
6.05 collar with cement mortar 1:2 but excluding excavation, protection works,
backfilling, concrete and masonry works in head walls and parapets all complete
as per drawing and Technical specifications and as directed by the Engineer-in-
charge.
6.05 a 300mm dia. (internal) Rm
6.05 b 600mm dia. (internal) Rm
6.05 c 900mm dia. (internal) Rm
6.05 d 1000mm dia. (internal) Rm
6.05 e 1200mm dia. (internal) Rm 2,291.25
6.05 f 1500mm dia. (internal)-2000mm dia Rm 126.25
Providing and laying Filter material underneath pitching in slopes complete as
6.06 per drawing and Technical specifications and as directed by the Engineer-in- cum 141.90
charge.
Providing and laying stone Pitching on slopes laid over prepared filter media
including boulder apron laid dry in front of toe of embankment complete as per
6.07 drawing and Technical specifications and as directed by the Engineer-in-charge. cum 664.49
Providing and laying boulders apron on river bed for protection against scour
6.08 with stone boulders weighing not less than 40 kg each complete as per drawing cum
and Technical specifications and as directed by the Engineer-in-charge.
Printing of culvert No. and span arrangement of any shade with synthetic enamel
paint black or any other approved colour to give an even shade as complete as
6.09 per Technical specifications and as directed by the Engineer-in-charge.
Nos
6.13 Steel in crash barrier (Taking delivery from Owners store including loading,etc) MT
Providing & placing first class granular bedding for pipe culvert complete as per
6.14 Cum
drawing & technical specification clause 2904
Painting two coats on parapet wall with synthetic enamel paint in all shades Ref.
6.15 Sqm
to Technical specification 803 .
Bill no 7. Major Bridges / Flyovers / ROBs / RUBs / Minor Bridges
Supplying, fitting and fixing in position true to line and level elastomeric bearing
7.12 i conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications cucm -
complete including all accessories as per drawing and Technical Specifications.
Conveying and laying Plain cement concrete M-15 for levelling course of approach
slab, mechanically mixed and compacted complete as per drawings and Technical
7.13 specifications and as directed by the Engineer-in-charge. Cum 430.17
Notes:
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
Providing and laying Reinforced cement concrete of M30 grade for approach slab
including reinforcement and formwork all complete as per drawings and
7.14 Technical specifications and as directed by the Engineer-in-charge. Cum 1,290.52
Notes:
a)Concrete
Construction shall be supplied
of precast free ofofcost
RCC railing M20at Grade,
naturalaggregate
ground level
sizeatnotconstruction
exceeding 12
site.
mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500,
7.15 centre to centre spacing between vertical post not to exceed 2000 mm, leaving Rm
adequate space between vertical post for expansion, complete as per drawing
and Technical specifications and as directed by the Engineer-in-charge.
Note :-
7.15 D RCC Railing& admixtures shall be supplied free of cost at batching plant location.
a)Cement Cum 182.79
b)Fly ashtwo
Painting usedcoats
as partial replacement
on kerbs in black andof cement
white orshall be after
yellow arranged
fillingbythe
contractor.
surface
with synthetic enamel paint complete as per drawing and Technical specifications
7.16 and as directed by the Engineer-in-charge. Sqm
Provision of an Reinforced cement concrete crash barrier at the edges of the road,
approaches to bridge structures and medians, constructed with M-40 grade
concrete excluding HYSD reinforcement conforming to IRC:21 and dowel bars 25
mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler
7.23a board, keyed to the structure on which it is built and installed as per design given Cum 1,814.27
in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June
1994 as per dimensions in the approved drawing and at locations directed by the
Engineer, complete as per drawing and Technical specifications and as directed by
7.23b the
HYSD Engineer-in-charge.
in Crash Barrier MT 199.57
Notes:
7.23c Pipe railing&over
a)Cement barrier shall be supplied free of cost at batching plant location.
admixtures RM
b)Fly ash used as partial
Providing and fitting replacement
Drainage of cementas
Spouts complete shall
perbe arranged
drawing andbyTechnical
contractor.
7.24 c)Taking delivery of HYSD steel from Owners store. Each 524.00
specifications and as directed by the Engineer-in-charge.
Providing and fixing PVC 150mm dia Service Ducts under footpath slab all
7.25 complete as per drawing and technical specifications and as directed by the Rm
Engineer-in-charge.
Providing and fixing 150mm dia PVC runner pipes under deck slab for draining
7.26 water all complete as per drawings and technical specifications and as directed by Rm 7,860
the Engineer-in-charge.
Providing and laying of geotextile filter behind the abutment satisfying the
requirements laid down in clause 2504.2.2. of MoRTH specifications to a
thickness of not less than 600 mm with smaller size towards the soil and bigger
7.27 size towards the wall and provided over the entire surface behind abutment, wing Cum 29,490.24
wall and return wall to the full height compacted to a firm condition complete as
per drawing and Technical specifications and as directed by the Engineer-in-
charge.
Construction of Reinforced Earth Structures including assembly and erection of
reinforcing elements, placement of facing panels and all associated components,
etc.,( excluding PCC in foundation, selected fill, Friction slab with crash barrier and
7.28 Pcc below friction slab and pipe over crash barrier) all complete as per drawings Sqm 7,394.31
and Technical specificatoins and as directed by the Engineer-in-charge.
Notes:
Notes:
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
Providing and laying Filter material underneath pitching in slopes complete as per
7.29 b)Taking and
delivery of HYSD & Structuraland
steel
Cum
drawing Technical specifications as from Owners
directed store.
by the Engineer-in-charge.
Providing and laying Stone Pitching on slopes laid over prepared filter media
7.3 including boulder apron laid dry in front of toe of embankment complete as per Cum
drawing and Technical specifications and as directed by the Engineer-in-charge.
Back filling with granular material behind box culvert, wing walls and return walls
7.31 complete as per drawing and Technical Specification clause 710.1.4.of IRC:78 & Cum 45,041
2200
Printing of Bridge No. and span arrangement of any shade with synthetic enamel
7.32 paint black or any other approved colour to give an even shade as complete as Nos
per Technical specifications and as directed by the Engineer-in-charge.
7.45 Sand filling in wells complete as per drawing and technical specifications 1207. cum
HYSD bar reinforcement in foundation, well kerb, well steining and in well cap
7.46 as per technical specification 1600 (Taking delivery of HYSD steel from Owners MT
store)
7.47 Chipping of extra pile concrete Nos
7.48 Selected fill in RE Wall Cum 150,625
7.49 M-40 Coping Cum
Notes:
7.50 Crash barrier
a)Concrete with
shall beFriction
suppliedSlab (Excluding
free of cost atlevelling PCC) level at construction
natural ground Cum 13,332.00
Notes:
site.
7.51 HYSD Taking
a)Concrete delivery
shall of Structural
be supplied free ofsteel
cost from Owners
at natural storelevel at construction
ground MT 1,333.20
site.
Taking delivery of Structural steel from Owners store,fabricating and erecting
structural steel(IS:2062,Quality 'B' grade designation Fe 410B) including plainting
viz tubular rolled sections, trusses, I sections C sections, plates angles handrails
etc., profiled to required shapes, as per drawings & specifications including cost of
7.52 insert plates, fasteners, fabricating, jointing, welding, threading, cost of enamel MT
paints of approved make and colour, transportation to final worksite, erection in
position etc. complete with all leads and heights as per hte drawings &
specifications and approval of engineer. (Note : Rate shall include preparation of
shop fabrication drawings for the approval of Engineer).
Providing and laying boulders apron on river bed for protection against scour with
7.53 stone boulders weighing not less than 40 kg each complete as per drawing and Cum
Technical specifications and as directed by the Engineer-in-charge.
Providing and laying PCC M15 Grade leveling course below curtain wall complete
as per drawing and Technical specification. Ref. to Technical specification 2700.
7.54 Notes: Cum
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
Providing M20 Grade curtain wall complete as per drawing and Technical
7.55 specification. Cum
Notes:
7.56 a)Concrete
Floor Apronshall be supplied free of cost at natural ground level at construction Cum
site.
7.57 Flexible Apron Cum
7.58 Perforated Pipe In RE wall Rm
Supplying, fitting and fixing in position true to line and level Rocker/Roller bearing
7.59 conforming to IRC standards complete including all accessories as per drawing
and Technical Specifications.Ref. to Technical specification 2000.
Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick
corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC
series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m
high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised
by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail
9.09 to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, Rm
330 mm long all complete as per Technical specifications and as directed by the
Engineer-in-charge.
Providing and erecting gantry mounted sign board over a designed support
system of aluminium alloy or galvanised steel, erected as per approved design
9.11 and drawings and with lateral clearance, all complete as per Technical Sqm
specifications and as directed by the Engineer-in-charge.
Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant
to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete
or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a
9.12 suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973 all Each
complete as per Technical specifications and as directed by the Engineer-in-
charge.
Providing and constructing Bus Shelters in the required locations as per detailed
drawing and as directed by the Engineer in charge. (Prior approval of the detailed
9.13 drawing has to be taken by the contractor) all complete as per Technical Each
specifications and as directed by the Engineer-in-charge.
Providing and fixing 100mm dia PVC pipes for draining storm water to drain all
10.05 complete as per drawings and technical specifications and as directed by the Rm
Engineer-in-charge.
Painting two coats on kerbs in black and white or yellow after filling the surface
10.06 with synthetic enamel paint complete as per drawing and Technical specifications Sqm
and as directed by the Engineer-in-charge.
Turfing lawns with fine grassing including ploughing, dressing including breaking
of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm
10.07 apart, including supplying and spreading of farm yard manure at rate of0.6 cum Sqm
per 100 sqm
Provision of an Reinforced cement concrete crash barrier at the edges of the
road, approaches to bridge structures and medians, constructed with M-40
grade concrete excluding HYSD reinforcement conforming to IRC:21 and dowel
bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt
filler board, keyed to the structure on which it is built and installed as per design
given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24
June 1994 as per dimensions in the approved drawing and at locations directed by
the Engineer, all as specified
10.08 Note :- Cum
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
b)Taking delivery of HYSD & Structural steel from Owners store.
Providing and laying stone Pitching on slopes laid over prepared filter media
including boulder apron laid dry in front of toe of embankment complete as per
10.11 drawing and Technical specifications and as directed by the Engineer-in-charge. cum #REF!
TUNNEL
Earth work excavation up to any depth including compacting the base in all class of soil
except hard rock requiring blasting depositing on bank with initial lead and lift and all
12.1 other incidental charges, such as shoring, strutting, baling out water, forming protective Cum
bunds etc.
Backfilling with approved material deposited at site from road way cutting including
conveyance of excavated material to site, spreading, grading to the required slope and
12.11 camber, watering and compacting to meet requirements of Table 300-2 of MoRT&H Cu.m
specifications and directions of Engineer-in-charge.
Cement concrete of 1:2:4 grade using 20 mm size aggregate including cost and
conveyance of all materials to site complying to the standard specification including cost
12.12 of formwork, laying, watering, curing, and all other incidental charges for leveling course Cum
below footing, base slab etc.
Reinforced cement concrete M25 mix using 20 mm aggregate including cost and
conveyance of all materials to site excluding cost and fabrication of steel, labour charges
for mixing, transporting, laying and curing concrete, hire charges for tools and plants
12.13 including all other incidental charges etc.
Providing and applying tack coat with bitumen emulsion using emulsion pressure
13.06a distributor on the prepared granular surface treated with primer cleaned with Sqm #REF!
deleted mechanical broom all complete as per Technical specifications clause 503 and as
directed by the Engineer-in-charge.
Providing and applying tack coat with bitumen emulsion using emulsion pressure
distributoron the prepared nominal bituminous surface cleaned with mechanical
13.06b broom all complete as per Technical specifications clause 503 and as directed by Sqm #REF!
the Engineer-in-charge.
Construction of median and Island above road level with approved material
13.11 Cum #REF!
brought from borrow pits, spread, sloped and compacted as per clause 407
Providing and laying 22mm thick precast Cement Concrete chequered tiles for
footpath over 40mm thick bed of cement mortor 1:3 proportion over 50mm thick
13.12 Sqm #REF!
PCC M-15 including cost of all materials, labour, loading, unloading, all leads,
curing, etc., complete as per drawing and technical specifications.
Providing & laying 600 mm dia. RCC pipes NP4 class for discharge of drain
13.13 including fixing with CM 1:2 prop including cost & conveyance of hume pipes & Lm #REF!
other materials, labour, lead charges,loading, unloading, curing complete.
Earth work excavation for foundation of drain at truck laybay, including setting
out, construction of shoring and bracing, removal of stumps and other deleterious
13.14 matter, dressing of sides and bottom, including removing the excavated stuff to a Cum #REF!
lead upto 5 kms, etc., complete as per technical specification clause 304- In
ordinary soil.
Providing Plain cement concrete M-15 grade including centering and shuttering
in drain foundation at truck laybay, including mixing, laying, vibrating, curing,
formwork and staging with cost of all materials labour, loading, unloading and
13.15 hire charges of machinery and lead charge. etc., complete as per drawing and Cum #REF!
Technical Specifications Sections 1700 & 1500.
Note :-
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
Providing Reinforced cement concrete M-20 for Road side Drains and Cover slab
b)Taking delivery
at truck laybay of HYSDcentering
including & Structural
andsteel from Owners
shuttering, store.
including mixing, staging, cost
of all materials, labour, loading, unloading, lead and hire charges of machinery,but
13.16 excluding cost of reinforcement all complete as per drawing and Technical Cum #REF!
Specifications Sections 1500 & 1700.
Note :-
a)Concrete shall be supplied free of cost at natural ground level at construction
site.
HYSD bar Reinforcement for RCC drain works at truck laybay, straightening bars
b)Takingbending,
cutting, delivery binding
of HYSDwith
& Structural
approved steel frombinding
quality Ownerswire
store.
after placing in
position, including cost of all materials (overlaps and wastages are not to be
13.17 measured and paid), bar bending charges, binding wire, labour etc., complete as MT #REF!
per drawing and technical specifications.
Note :-
a)Taking delivery of HYSD & Structural steel from Owners store.
13.18 Masonry Head Wall Cum #REF!
13.19 paver blocks of 80 mm thick having a crushing strength of 40 Kg. /Sq cm over a 50 Sq.m #REF!
mm thick coarse sand bedding
13.2 SDBC in Junction / Bus bay Cum #REF!
13.21 150mm dia HDPE pipe Rm #REF!
13.22 Drinking water & Toilet blocks Nos #REF!
13.23 Letter for 'BUS' Sq.m #REF!
13.24 External Plaster - 20 mm thk Sq.m #REF!
13.25 External Painting Sq.m #REF!
Bill No 14. Maintenance of Road
A Maintanence during Construction period
Carrying out repairs to pot holes and patching to existing Bituminous carriageway
surfacing using Dense Bituminous Macadam including tack coat with all lifts and leads
14.01 complete as per MoRT&H technical specification clause 3004 and as per the direction of Sq.m
engineer.
Providing and applying tack coat with bituminous emulsion with all lifts and leads
14.02 sqm
complete as per MoRT&H technical specification clause 503.
Providing and laying renewal coat with semi dense bituminous concrete of 25mm thick
14.03 Cum
with all lifts and leads complete as per MoRT&H technical specification 508 clause.
a) Providing and laying Pavement marking with hot applied thermoplastic material with
14.05 glass reflectrising beads complete as per drawing and Technical Specifications Clause 803.
14.05a a) Lane/ Centre line/ Edge marking/ Transverse marking and any other marking Sqm
b) Directional Arrows, Lettering etc. as per drawing No.61 of MORTH Type Designs for
14.05b Sqm
Intersections on National Highways
14.05c c) Pedestrian Crossing at junctions and median openings Sqm
Providing and laying Plain Cement Concrete M 20 kerb as per drawing and Technical
14.06 Specifications Clauses 408 and Section 1700
14.06a a) M-20 Grade Median Kerb "I" Type Section Cum
14.06b b) M-20 Grade Median Kerb "L" Type Section Cum
Providing and laying kerb painting with ordinary paints grade-I (IS:164) complete as per
14.07 Sqm
drawing and Technical Specifications Clause 803
Providing and fixing road studs (Cats eye reflectors) complete as per drawing and
14.08 No
Technical Specifications Clause 805, 812 and 813, as directed by Engineer
Bill No 15. MISCELLANEOUS ITEMS
Providing and maintaining brand new vehicles(make Mahindra Scorpio/ Toyota
15.01 Innova or equivalent) for clients including providing of driver, POL etc. as per Nos
Technical specification clause 124
Providing (Traffic Aid Post) out post Building as per Technical specifications and as
15.12 directed by the Engineer-in-charge. Sqm
Providing (Medical Aid Post) out post Building as per Technical specifications and
15.13 as directed by the Engineer-in-charge. Sqm
Providing (Vehicle Rescue Post) out post Building as per Technical specifications
15.14 and as directed by the Engineer-in-charge. Sqm
#REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
-
#REF!
#REF!
#REF!
#REF!
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
- -
- -
- -
- #REF! #REF!
- -
- -
6,603 #REF! #REF!
194 #REF! #REF!
- -
- #REF! #REF!
- -
- -
- -
- -
5,381 #REF! #REF!
- -
- -
- -
- -
434 #REF! #REF!
- -
48 #REF! #REF!
34,698 #REF! #REF!
3,470 #REF! #REF!
64 #REF! #REF!
- -
- -
- -
- -
- -
1,501 #REF! #REF!
- -
28 #REF! #REF!
- -
- -
- -
- -
- -
2,291
126
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
0 #REF! #REF!
- -
- -
- -
8 #REF! #REF!
8 #REF! #REF!
5 5,000 25,000
- -
- -
9,775 #REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
3,194 #REF! #REF!
- -
14,609 #REF! #REF!
- -
- -
- #REF! #REF!
- -
- -
- -
- -
34,575 #REF! #REF!
29,290 #REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
150,625 #REF! #REF!
- -
13,332 #REF! #REF!
1,333 #REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
2,275 -
- -
- -
- -
767 #REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
#REF! #REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF! #REF!
- -
- -
#REF! #REF!
#REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
#REF! #REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
#REF! #REF!
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Plan
Type of Type of Area
Span
Sr. No. DCH Name superstructu foundati Arrangement
re on
2625 105 12.5 0.22 2 577.5 86.6 3095 35 0.9627 24 808.668 121.3
4375 175 12.5 0.22 2 962.5 144.4 5125 35 0.9627 40 1347.78 202.167
Superstructure
121.3 4200 60.35 7.6 2.24 0.4 18 122.5728 0.57 18.3859 361.152 2.96
202.167 7000 100.58 7.6 2.24 0.4 30 204.288 0.57 30.6432 601.92 2.575
0
Subs
Abutment (Front wall) / Verticle Wall for RCC 0.1 Abutment (Side Wall, dirtwall & return wall) 0.1
Box Shutteri
H B D No V Fe 500 ng H B D No V Fe 500
0 14.5 0.4 2 0 0 0 0 0 0.15 4 0 0
2.96 26.5 0.4 4 125.504 12.5504 627.52 6.345 2.55 0.5 4 482 48
2.575 26.5 0.4 4 109.18 10.918 545.9 5.96 3.15 0.5 4 488 49
5 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 6.385 26.2969 0.46925
5 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
5 271.068 0 0 0 0 0 0 0 0 0 0
5 271.068 0 0 0 0 0 0 0 0 0 0
5 271.068 0 0 0 0 0 0 0 3.635 36 0.4
0 0 0 0 0 0 0 0 0 7.735 50 0.53675
5 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
5 271.068 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
2962.24 Total 3396.85 Total
2671.03
136.5852 400.654
Eq. Th
60 0 0 0 0 0 0 0 0 0 0 0 0
93 0 0 0 1 0 0 0 0 0 0 0 0
70 0 0 0 0 0 0 0 0 0 0 0 0
98 0 0 0 0 0 0 0 0 0 0 0 0
38 0 0 0 0 0 0 0 0 0 0 0 0
38 0 0 0 0 0 0 0 0 0 0 0 0
112 0 0 0 0 0 0 0 0 0 0 0 0
140 0 0 0 0 0 0 0 0 0 0 0 0
82 0 0 0 0 0 0 0 0 0 0 0 0
102 0 0 0 0 0 0 0 0 0 0 0 0
56 0 0 0 0 0 0 0 0 0 0 0 0
76 0 0 0 0 0 0 0 0 0 0 0 0
57 0 0 0 0 0 0 0 0 0 0 0 0
71 0 0 0 0 0 0 0 0 0 0 0 0
58 0 0 0 0 0 0 0 0 0 0 0 0
83 0 0 0 0 0 0 0 0 0 0 0 0
1233.5 Total 0 Total
0 4024.8
0
liner
excavation
Foundation
376.2 37.62 324.9 28 1.2 24 760.0 76.0 2533 9.5 9.5 1.8
217.8 21.78 188.1 28 1.2 16 506.7 50.7 1689 9.5 5.5 1.8
1144.8 114.48 954 28 1.2 32 1013.4 101.3 3378 9.5 5.5 1.8
1144.8 114.48 954 28 1.2 32 1013.4 101.3 3378 9.5 5.5 1.8
376.2 37.62 324.9 20 1.2 26 588.1 58.8 588 9.5 5.5 1.8
388.8 38.88 324 16 1.2 24 434.3 43.4 543 9.5 5.5 1.8
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0
3394.8 178 689.654 Total
4024.8 5075.81
402.48 507.581
Eq TH
ile cap for Pier 0.1 Pile for Pier 0.1 6 Pile Rm
Shutteri
ng liner
No V Fe 500 L dia No V Fe 500 Area
14 1316.7 131.67 666.9 28 1.2 112 3546.7 354.7 11822 3808 0.84
0
4 649.8 64.98 461.7 28 1.2 32 1013.4 101.3 3378 1568 0.86
4 376.2 37.62 324.9 28 1.2 24 760.0 76.0 2533 1120 0.57
0
4 376.2 37.62 324.9 28 1.2 24 760.0 76.0 2533 1568 1.25
8 752.4 75.24 461.7 28 1.2 48 1520.0 152.0 5067 2240 1.01
0.86 10.30 6.30 2.3 4 597 10.30 10.30 2.3 4 976.028 22.1 37.6
0.57 6.30 6.30 2.3 4 365 10.30 6.30 2.3 4 596.988 13.0 22.1
1.25 27.30 6.80 2.3 4 1708 10.30 6.30 2.30 4.00 596.988 66.2 22.1
1.01 27.30 6.80 2.3 4 1708 10.30 6.30 3.30 8.00 1713.1 66.2 44.2
0.56 9.80 5.80 2.375 4 540 9.80 5.80 2.38 4 539.98 22.1 22.1
0.55 9.80 5.80 2.375 4 540 9.80 5.80 2.38 6 809.97 22.8 33.2
298.5 12.288
298.5 20.48
0 0 0
0 0 0
0 0 0
0 0 0
25244.7 150625 147.456
1 Slab 1 Open
2 RCC box 2 Pile
3 RCC T
4 PSC I
Plan
Area
Type of Type of Span
Sr. No. DCH Name superstructu foundati Arrangement D
re on
L
VUP 1 40+310, 39+790 3 1 1*20 580 20
VUP 2 50+810, 50+290 sk 30 3 1 1*20 738.178 20
VUP 3 59+530, 59+010 sk 33 3 1 1*20 762.813 20
1 40+310, 39+790
2 50+810, 50+290
3 59+530, 59+010
4 32+560, 32+050
5 34+690, 34+180
6 42+310, 41+790
7 45+390, 44+880
8 47+730, 47+220
9 49+380, 48+870
10 54+150, 53+630
11 57+090, 56+580
12 61+030, 60+510
13 62+420, 61+190
for slab 0.15 for PSC Girder 0.15
for RCC box 0.1 for RCC Girder 0.2
Superstructure
208.8
269.184
211.2
689.184
0.15 0.035 for PSC Girder
0.2 0.04 for PSC Box/segmental
uperstructure
Abutment (Front wa
Diaphgram Eq. Th 0.18
Shutteri
Fe 500 Shuttering HTS ng
L B D No V Fe 500 H
24 1000 0.00 10.5 0.4 1.96 6 49.392 0.53 8.89056 148.68 6.597
24 1000 0.00 11 0.4 1.96 6 51.744 0.42 9.31392 155.76 7.819
24 1000 0.00 11 0.4 1.96 6 51.744 0.41 9.31392 155.76 6.721
Abutment (Front wall) / Verticle Wall for RCC 0.15 Abutment (Side Wall, RE wall) 0.06
Box Shutteri
ng
B D No V Fe 500 H B D No V Fe 500
1.767 4 46.63 6.995 124.351 10.462 29 0.18 2 142 9
1.767 4 55.27 8.290 147.385 11.684 36.91 0.18 2 202 12
1.767 4 47.51 7.126 126.688 10.586 38.14 0.18 3 283 17
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
al 0 Total 1270.88
0 2445.02
0 244.502
Founda
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0
Total 0 Total
0 0
0
liner
excavation
Foundation
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 0 0 0 0.0 0.0 0 0 0 0 0
0 0 0 Total
0 0
0 0
Eq TH
al 0 0 0 0
0 0
0 0
Excavation PCC
BOTH QUANTITY
EXCUVATION 10773.98
PCC 2340.86
HEAD WALL CONCRET 1500.75
PITCHING 141.90
APRON 664.49
PIPE 1.5M DIA
126.25
STEEL 27.96
1.2M DIA
2291.25
10773.98214
2340.85585
1500.7533852082
141.9
664.4886356997
1.2M DIA 1.5M DIA 1.2M DIA
2291.25 126.25 2291.25
27.957504132
6.293