Beruflich Dokumente
Kultur Dokumente
Engineered
Components & Supplies Screw Tips, Screws
& Barrels
Pages 609 - 692
Nozzles & Tips — Screws & Barrels — Mold & Die — Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
2 © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
Standard Replacement
Nozzles
®
Pages 554 – 563
The
Original
Buyers Nozzle Thread
Guide Adapters
Pages 564 – 570
Engineered
Components & Supplies Nozzle Tips
Pages 571 – 579
Nozzles
Pages 580 – 581
Refacing Tools,
Thread Cleanout
Melt Temperature-
& Pressure-Reading
Nozzles
Page 598
Nozzle Accessories
Pages 603 – 607
Why buy IMS Nozzles? Here are seven reasons: #4 Finishing. After being expertly machined, our nozzles
#1 High quality steel. Unlike some nozzle suppliers are vacuum heat treated under computer control to
who use lower grade, re-sulfurized or pre-heat treated maximize wearability. They're also hand polished at
steels that tend to chip and/or fail prematurely, we use critical surfaces for the smoothest finish possible.
only premium quality steels for all of our nozzle #5 Testing. IMS uses all the latest computerized
components. measuring and hardness checking equipment. When
#2 Quality control. We insist that every bar of steel is you buy an IMS nozzle, you can be sure you’re getting
inspected and thoroughly tested. the same consistent quality every time.
#6 Stock.
IMS stocks their exclusive replacement nozzles
in most popular sizes and styles.
CALL FOR AVAILABILITY
or check ONLINE at www.imscompany.com
#7 Custom Nozzles.
IMS can also design, manufacture and ship most custom nozzles
USE THE REQUEST FOR QUOTATION FORM ON PAGE 559
BEFORE ORDERING, PLEASE GATHER THE FOLLOWING DIMENSIONS:
MEASURE RADIUS MEASURE SPRUE BUSHING MEASURE THREAD SIZE & REAR OPENING
1 of Sprue Bushing 2 ORIFICE “O” DIMENSION 3 and advise machine make & model
and subtract /32" for proper seal
1
Rear Opening
IMS Radius Gauge IMS Orifice Gauge Diameter and Pitch of Threads
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
554 B13-1-002 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Externally Heated, One-Piece Style
3 Bar Quality
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-003/1 555
IMS Externally Heated, One-Piece Style
B1: Nozzles & Nozzle Tips
3 Bar Quality
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-003/3-031317 557
IMS Internally Heated, One-Piece Style
B1: Nozzles & Nozzle Tips
Heated internally, these nozzles can go deeper into die Purchasers also order:
clearance holes for shorter sprues.
• Cartridge Heaters, pages 260-267
• Heat Treated Stress Proof Tool Steel
• Silicone Grease, page 681
• Orifice Gauges, page 605
• Nozzle Thread Cleanout Taps, page 583
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
558 B13-1-004 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
- OPTIONAL -
Thermocouple Hole
1/4"-28
1/8”-27
Internal
Cartridge Style
N/A
Optional:
3. Press Make __________________________________________________
5. Operating Temperature _________________________________________
and Model ___________________________________________________
6. Thermocouple
4. Material To Be Molded _________________________________________ Thread Size and Location _______________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-005-040815 559
IMS Externally Heated, Removable Tip Style
B1: Nozzles & Nozzle Tips
Rather than buy a variety of expensive nozzles, just buy different tips for these nozzles.
• Heat Treated Stress Proof Tool Steel
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
560 B13-1-006/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Externally Heated, Removable Tip Style
3 Bar Quality
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-006/2-011117 561
IMS Internally Heated, Removable Tip Style
B1: Nozzles & Nozzle Tips
Rather than buy a variety of expensive nozzles, just buy Purchasers also order:
different tips. Heated internally, these nozzles can go deeper
into die clearance holes for shorter sprues. • Cartridge Heaters, pages 260-267
• Heat Treated Stress Proof Tool Steel • Nozzle Tips, page 571-579
Recommended
Thread Rear Unit
Length Item # Cartridge Heater
Size Opening Price (3 required)
GENERAL PURPOSE 120 V / 240V
11/4"-12 3
/4" 104608 $169.25 #135881 / #135882
11/2"-12 1
/2" 104582 Inquire #135881 / #135882
1 /2"-12
1
.59" 106067 169.25 #135881 / #135882
41/4"
11/2"-12 27
/32" 104504 169.25 #135881 / #135882
13/4"-8 3
/4" 104477 169.25 #135881 / #135882
1 /4"-8
3
11/4" 104626 169.25 #135881 / #135882
1 /4"-10
1 3
/4" 105295 Inquire #135886 / #135887
11/4"-12 3
/4" 104575 Inquire #135886 / #135887
11/2"-12 1
/2" 104551 $146.30 #135886 / #135887
11/2"-12 .59" 106066 146.30 #135886 / #135887
61/4"
11/2"-12 27
/32" 104641 146.30 #135886 / #135887
13/4"-8 3
/4" 104620 146.30 #135886 / #135887
1 /4"-8
3
1 /4"1
104569 146.30 #135886 / #135887
22 m-1.75 mm 3
/4" 120960 147.40 #135886 / #135887
11/4"-10 3
/4" 110344 $183.70 #135890 / #135891
1 /4"-12
1 3
/4" 104492 183.70 #135890 / #135891
11/2"-12 1
/2" 104636 183.70 #135890 / #135891
8 /4"
1
1 /2"-12
1 3
/4" 110311 183.70 #135890 / #135891
11/2"-12 27
/32" 111383 183.70 #135890 / #135891
1 /4"-8
3 3
/4" 104539 183.70 #135890 / #135891
13/4"-8 11/4" 104510 Inquire #135890 / #135891
FULL-TAPER
41/4" 11/4"-12 3
/4" 104604 Inquire #135881 / #135882
Ask about other sizes
*RFQ=Request for Quote
IN STOCK — Same Day Shipment!
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
562 B13-1-007-062113 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
Accepts
Standard Nozzle Tip
(11/2" long
with 7/8" thread).
- OPTIONAL -
Thermocouple Hole
1/4"-28
1/8”-27
Internal
Cartridge Style
N/A
Optional:
3. Press Make _________________________________________________
5. Operating Temperature ________________________________________
and Model __________________________________________________
6. Thermocouple
4. Material To Be Molded _________________________________________ Thread Size and Location ______________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-008-040815 563
IMS Standard Nozzle Thread Adapters
B1: Nozzles & Nozzle Tips
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
564 B13-1-009/1-040615 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Standard Nozzle Thread Adapters
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-009/2-121414 565
IMS Standard Nozzle Thread Adapters
B1: Nozzles & Nozzle Tips
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
566 B13-1-009/3 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Standard Nozzle Thread Adapters
Nozzles, Screws, Screw Tips, Molds, Water Lines, Heater Bands, etc.
Item No. 110671 .......... $6.95 pair Item No. 136368 .......... $1.90 pair
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-009/4 567
IMS Nozzle Thread Adapters with Metal Trap
B1: Nozzles & Nozzle Tips
TM Help stop tramp metal from entering mold Made in the U.S.A
3 Bar Quality
For use only with 1 /4"-8 thread, 1 /4" rear opening nozzles
3 1
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
568 B13-1-010/1-120414 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
Make of Press Dimensions Unit Recommended Heater Bands
Item # Thread Size (A) Rear Opening (B) Thread Length (C) Price 120 Volt Price 240 Volt Price
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-010/2-120414 569
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
B1: Nozzles & Nozzle Tips
Determined by
Thread Length
15/8" Standard
Body Length
/8" Hex
5
Standard 30°
21/2" Standard 3/4"Standard Rear Opening
Body Diameter Opening Rear Opening Angle
13/4"-8
Standard
Thread
Required:
1. Press Make _________________________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
570 B13-1-011-040815 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Injection Molding Nozzle Tips
IMS precision made nozzle tips are designed from high If your application requires higher wear resistance, sizes
quality, heat-treated tool steel and are perfect for every- not listed, etc. please contact an IMS technician for a
day use in the molding shop. The technicians at IMS have prompt quote, see the “Request for Quotation Form”
worked hard to bring you quality at an affordable price. on page 579 of the catalog, or fill out a digital form at
imscompany.com
At IMS, we put our customers’ satisfaction as the
highest priority. When it comes to our nozzle tips, Beryllium Copper: Nozzle tips made of heat treated
we think you will agree that they are a great value. beryllium copper ensure maximum heat transfer plus
Here are 10 reasons to buy IMS nozzles: strength and toughness. Beryllium Copper nozzle tips
will help prevent tip freeze-ups, will let you lower nozzle
1. All IMS Tips are guaranteed to meet our certified material temperature, and will enable electrical use reduction
and hardness requirements.
while shortening cycle times.
2. All IMS Tips are machined using sate-of-the-art machines
by experienced technicians who use the most up-to-date NOTE: Beryllium Copper Nozzle Tips are not
practices so you can be assured they are made with care recommended for use with abrasive materials.
and quality.
3. All IMS Tips are finished to perfection using hand polishing. BEFORE ORDERING, PLEASE GATHER THE
FOLLOWING DIMENSIONS:
4. All IMS Tips are protected from rust and corrosion.
MEASURE RADIUS
5. All IMS Tips are protected from thread damage and nicks. 1 of Sprue Bushing
6. All IMS Tips are stamped with sizes and styles for easy
re-ordering.
7. All IMS Tips are tested using the latest computerized
measuring and checking equipment.
IMS Radius Gauge MEASURE SPRUE BUSHING
8. All IMS Tips are warrantied against premature failure and #107337 2 ORIFICE “O” DIMENSION
and subtract /32" for proper seal
1
defects in workmanship.
9. All IMS Tips are quality inspected in our facility using the
strictest ISO approval practices. IMS is an ISO 9001-2008
certified company. IMS Orifice Gauge
#115617
10. Your satisfaction is guaranteed!
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-012-010515 571
IMS Standard Nozzle Tips
B1: Nozzles & Nozzle Tips
TM
3 Bar Quality
11/2" Length .................................. $15.00 each 2 3/4" Length ........................... $32.50 each
(1" x 1" Heater Band Recommended)
Orifice 1
/2" Radius 3
/4" Radius Orifice 1
/2" Radius /4" Radius
3
1
/16" 101527 101529 1
/16" 109627 108343
3
/32" 116602 136160 3
/32" 108347 108341
1
/8" 101440 101444 1
/8" 101491 101453
1
/8" 108390 (Flat Face) 5
/32" 101477 101518
5
/32" 101448 101442 3
/16" 101467 101506
3
/16" 101446 101441 7
/32" 108338 108344
7
/32" 132046 121078 1
/4" 101522 101482
1
/4" 101445 101439 9
/32" 108348 108342
9
/32" 143733 143735 5
/16" 108346 108339
5
/16" 101443 101447 11
/32" 143738 143739
11
/32" 143734 143736 3
/8" 105288 105272
3
/8" 105244 105246 1
/2" 129042 143740
7
/16" 144242 143737
1
/2" 109012 121081
4" Length ....................... $48.75 each 6" Length ........... $67.50 each
(1" x 2" Heater Band Recommended) (1" x 3" Heater Band Recommended)
Orifice 1
/2" Radius 3
/4" Radius Orifice 1
/2" Radius 3
/4" Radius
1
/16" 108396 112107 1
/16" 108397 112109
3
/32" 108406 112103 3
/32" 108395 112104
1
/8" 101493 101457 1
/8" 101495 101459
5
/32" 108402 112115 5
/32" 108392 109157
3
/16" 101468 101510 3
/16" 101470 101512
7
/32" 108399 112110 7
/32" 108388 112112
1
/4" 101524 101486 1
/4" 101449 101490
9
/32" 108407 112105 9
/32" 108408 112106
5
/16" 108404 112017 5
/16" 108405 112102
3
/8" 108403 112098 3
/8" 108394 112100
continued on next page
®
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
572 B13-1-013/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
GENERAL PURPOSE NOZZLE TIPS
Used for styrene, polyethylene and other general purpose materials
Orifice 1
/2" Radius 3
/4" Radius Orifice 1
/2" Radius 3
/4" Radius
1
/16" 145554 145566 1
/8" 101501 101466
3
/32" 145555 145567 3
/16" 101489 101456
1
/8" 145556 145568 1
/4" 101476 101521
5
/32" 145557 145569
3
/16" 145558 145570
7
/32" 145559 145571
1
/4" 145560 145572
9
/32" 145561 145573
5
/16" 145562 145574
11
/32" 145563 145575
3
/8" 145564 145576
1
/2" 145565 145577
11/2" Length .................................. $15.00 each 2 3/4" Length ........................... $32.50 each
(1" x 1" Heater Band Recommended)
Orifice 1
/2" Radius 3
/4" Radius Orifice /2" Radius
1 3
/4" Radius
3
/32" 143744 143750 3
/32" 108322 108325
1
/8" 101479 101511 1
/8" 101455 101472
5
/32" 110366 112111 5
/32" 108327 108321
3
/16" 101458 101488 3
/16" 101508 101451
7
/32" 143745 143751 7
/32" 143758 143764
1
/4" 101523 101475 1
/4" 101498 101517
9
/32" 143746 143752 9
/32" 143759 143765
5
/16" 129336 143753 5
/16" 143760 143766
11
/32" 143747 143754 11
/32" 143761 143767
3
/8" 143748 143755 3
/8" 143762 143768
Nozzle orifice size should be 10% smaller than the sprue bushing.
Te c
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-013/2-063017 573
B1: Nozzles & Nozzle Tips
NYLON NOZZLE TIPS
Minimizes drool when molding nylon
Beryllium Copper
Orifice 1
/2" Radius /4" Radius
3
1
/8" 101509 101473
3
/16" 101499 101464
1
/4" 101485 101452
11/2" Length .................................. $16.00 each 2 3/4" Length ........................... $42.50 each
(1" x 1" Heater Band Recommended)
Orifice 1
/2" Radius /4" Radius
3
Orifice 1
/2" Radius 3
/4" Radius
3
/32" 143777 143783 3
/32" 143791 143799
1
/8" 101520 101463 1
/8" 101481 101525
5
/32" 143778 116810 5
/32" 143792 143800
3
/16" 101497 101516 3
/16" 101469 101513
7
/32" 143779 143785 7
/32" 143793 143801
1
/4" 101484 101505 1
/4" 101460 101502
9
/32" 143780 143786 9
/32" 143794 143802
5
/16" 107509 107512 5
/16" 143795 143803
11
/32" 143781 143787 11
/32" 143796 143804
3
/8" 142793 143788 3
/8" 143797 143805
r. Techie’
M
s
If you are having shear problems with Acrylic materials try a Full Taper nozzle.
Te c
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
574 B13-1-013/3-072814 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Metric Nozzle Tips
11/2" Length .................................. $15.00 each 11/2" Length .................................. $15.00 each
Orifice 10mm Radius 15mm Radius Orifice 10mm Radius 15mm Radius
2mm 143741 143810 2mm 143774 143815
2.5mm 143742 143811 2.5mm 143775 143816
3mm 143826 143812 3mm 124322 143817
4mm 143809 143813 4mm 143814 143818
5mm 144241 144265 5mm 122907 145295
6mm 144254 134489 6mm 123064 145296
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-014 575
IMS Arburg Nozzle Tips
B1: Nozzles & Nozzle Tips
TM
— OPTIONAL ACCESSORY —
ARBURG NOZZLE TIP ADAPTER
Adapts any OEM Arburg M24x1.5 thread to a standard IMS 7/8”-14 tip
Item # Style OAL Rear Thread Rear Opening Unit Price
121345 General Purpose 2.07" M24x1.5 .315 $66.60
121347 Full Taper 2.07" M24x1.5 .315 66.60
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
576 B13-1-015/1-071014 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
NYLON ARBURG NOZZLE TIPS
Minimizes drool when molding nylon
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-015/2-071014 577
Maximum Contact
B1: Nozzles & Nozzle Tips
TM
“Mushroom” Tips
3 Bar Quality
7/8"-14 THD
1/2"
Extended radius surface allows greater contact
between nozzle and sprue bushing —
HELPS STOP LEAKAGE 1-3/4"
“Mushroom”
Tip 1/2"
• 3/4" Radius
1-3/4"
• 11/4" Hex
Item # Orifice Unit Price
• 7/8"-14 Thread
144124 1
/8" $32.00
• 1/2" Rear Opening 144125 3
/16" 32.00
.00
• 13/4" Long
144126 1
/4" $32
32.00
144127 5
/16" 32.00
144128 3
/8" 32.00
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
578 B13-1-016-010515 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
“MUSHROOM” STYLE
Optional:
3. Material To Be Molded _________________________________________ 4. Operating Temperature _________________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-017 579
IMS
B1: Nozzles & Nozzle Tips
Metric to
Standard Nozzle Tip Thread Adapters
3 Bar Quality
TM
Lets you use less expensive standard nozzle tips Made in the U.S.A
— SPECIFICATIONS —
• 1- /8" Body Diameter
3
• Overall Length 2.07"
• 1- /4" Wrench Flats
1 4140
teel
• /2" Opening at back of female nozzle tip threads
1
Alloy S
• Adds 0.94" to overall length of assembled
nozzle body and tip
Nozzle Tip (shown)
sold separately
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
580 B13-1-018-110116 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
Overall Length
1/2 "
Standard
Rear Seat
Flat
Thread Length Length
Length
13/8 "
Standard 11/4" 1/2 "
Standard Standard
Body Opening
Rear Opening Rear Opening Rear Face
Diameter Flats
7/8 "-14
Angle Diameter
Standard
- OPTIONAL -
Thermocouple
Hole
15/8" Standard Metal Trap Option Thread Diameter and Pitch
1/4"-28 Hex
1/8”-27 Yes No Trap. L.H.
N/A
Optional:
1. Press Make _________________________________________________
2. Optional Thermocouple
and Model __________________________________________________ Thread Size and Location ______________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-019-040815 581
IMS Radius Refacing Tools
B1: Nozzles & Nozzle Tips
3 Flute, 3 Flute,
3
/4" Shank
1
/2" Shank
3 Flute, 4 Flute,
3
/4" Shank /2" Shank
1
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
582 B13-1-020-101113 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Thread Cleanout Taps
Note: IMS Thread Cleanout Taps are bottoming taps only. Do not use
as starter taps.
you need!
105187 11/2"-12 95.85
105152 1 /4"-8 3
149.75
IN STOCK
Spare Parts
111124 /8"-14 spare lapper head
7
$56.60
Other Sizes Available
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-021 583
®
B1: Nozzles & Nozzle Tips
Select
Anti-Drool Nylon Nozzle Tips with Spreader Insert
5 Bar Quality
TM
Stops Drool,
Stringing &
Freeze-Off
11/2" Long
(adds /4" to3
overall length
of nozzle) Use with any standard
Removable Tip Nozzle Body with
1/2" bore and 7/8"-14 nozzle tip thread
7/
8"-14
Thread
Here’s How It Works (See diagram above):
Spreader body (1) extracts heat from plastic in nozzle body
and transfers it to spreader tip (2). Tip narrows passage at rear of
H-13 Tool Steel nozzle orifice. Size of passage and heat from spreader let you
Tip and Insert precisely control melt temperature through that critical area,
avoiding both freeze-offs and drooling. The rest of the nozzle orifice
Unique Spreader Design
ALSO HELPS IN MATERIAL MIXING (3) cools freely, allowing a clean break with minimal stringing.
Specifications
• 4140 Pre-Hardened and Nitrided
• For use on any molding machine*
(* Van Dorn Machines must use
Exploded view shows internal
modified Shut-Off Nozzle - Inquire)
spring and internal cone
• Use with any thermoplastics with
drooling issues such as Nylon
• Includes (1) 1/4"-28 Thd
Thermocouple Hole
• Recommend (2) Heater Bands:
(1) 2-1/2" Diameter x 1" Wide
(1) 2-1/2" Diameter x 1-1/2" Wide
Spring Cracking Pressure: 443 psi
Max Temp: 750° F
Spare Parts
165347 Replacement internal spring $196.00
165348 Replacement internal cone 318.00
3 Bar Quality
Modified
Nozzle Tip Torpedo Minimize nozzle drool and sink patterns
7
/8"-14 thd
Spare Parts
1/2” Radius Tips 147872 (1/16") 147873 (1/8") 147874 (3/16") $77.55
— NOTE —
3/4” Radius Tips 147875 (1/16") 147876 (1/8") 148266 (3/16") 77.55
The spring loaded valve in nozzle tip restricts movement
of material until activated by pressure. Opens in the Stems 147865 (1/16") 147866 (1/8") 142357 (3/16") 26.20
direction of the sprue bushing and closes until recycled. Torpedo 142358 22.95
Berylium Copper Tips Available - Inquire Spring 142359 4.35
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-023-012115 585
SLIM LINE Shutoff Nozzles
B1: Nozzles & Nozzle Tips
TM
Standard
Removable Nozzle Tip
Note: General Purpose design shown.
Other styles and lengths available.
See pages 571-579
Model 10 (Sized for Shots 1/2 to 10 oz.)
BODY Removable Inconel
Thread Size Rear Opening Item # Tip Adapter Spring Piston
Removable 1-1/4"-12 3/4" 104697
Tip Adapter 1-1/2"-12 1/2" 105094
1-1/2"-12 27/32" 105027 117521 104753 104825
1-3/4"-8 3/4" 104956
1-3/4"-8 1-1/4" 129915
Inconel Spring
Standard
(for heats over 800° F)
Nozzle Body
Note: Externally Heated
design shown.
Internally Heated
available— INQUIRE Model 30 (Sized for Shots 10 to 48 oz.)
BODY Removable Inconel
Thread Size Rear Opening Item # Tip Adapter Spring Piston
1-3/4"-8 3/4" 104989
118037 105914 104875
1-3/4"-8 1-1/4" 104915
Old Style Shutoff Nozzles are no longer available. Use new thread adapter and a standard nozzle tip.
Save money and lower your total investment in nozzle tips!
3 Bar Quality
The most common use of mixing nozzles is to improve the distribution of
color concentrates, improving the appearance or reducing the scrap rate
due to poor color distribution. Mixing nozzles can provide benefits often
overlooked that improve the quality of the molded part as well as
improve the performance and output of the machine.
Part Surface Finish — Variations in the melt temperature of the plastic from the layered flow effect in both the barrel and
nozzle can result in “Seams” or “Flow Lines” in the molded part. Blending the molten polymer just prior to the mold improves
thermo homogeneity and results in improved flow into and through the mold.
#143018 EZ Flow 20 Mixing Element Only: 0.650" OD, 2.275" OAL, 17-4PH Stainless Steel ..........................$202.80
r. Techie’
M
s
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-025-102014 587
EZ Flow 95 Mixing Nozzle
B1: Nozzles & Nozzle Tips
EZ Flow 95 is a one piece drop-in insert held in place with standard nozzle tip. The design offers very aggressive
mixing action in an easy-to-use and clean design.
(1) 1/4"-28NPT & (1) 1/8"-27NPT Installed On Hex. Uses standard 7/8"-14 Nozzle Tips.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
588 B13-1-026 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
EZ Flow 260 Mixing Nozzle
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-027-082614 589
In-Line Helix Style Mixing Nozzle
B1: Nozzles & Nozzle Tips
The In-Line color mixing nozzle has seven drop-in insert pieces, held in place with a standard nozzle tip.
The dynamic design offers the most aggressive mixing action for improved color homogeneity.
(1) 1/4"-28NPT & (1) 1/8"-27NPT Installed On Hex. Uses standard 7/8"-14 Nozzle Tips.
#144169 EZ Flow RSS 80 Mixing Element, 5/8" OD, 6.100" OAL, 17-4 Stainless Steel
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
590 B13-1-028 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
s
Te c
h T i ps Melt Temperature Mold Temperature
Material ° Fahrenheit ° Celsius ° Fahrenheit ° Celsius
Acetal (Co-polymer) 400 203 200 92
Acetal (Homo-polymer) 425 217 210 97
Acrylic 425 217 190 86
ABS (Medium) 400 203 180 81
ABS (High Impact) 420 214 185 83
Cellulose Acetate 350-385 175-194 120-150 47-63
Nylon (Type 6) 500 258 200 92
Nylon (Type 6/6) 525 272 175 78
Polybutylene 475 244 200 92
Polycarbonate 550 286 220 103
Polyethylene (Low Density) 325 161 80 25
Polyethylene (High Density) 400 203 110 42
Polyphenylene Oxide 385 194 140 58
Polyphenylene Sulfide 575 300 250 119
Polypropylene 350 175 120 47
Polystyrene (General Purpose) 350 175 140 58
Polystyrene (Medium Impact) 380 192 160 69
Polystyrene (High Impact) 390 197 180 81
PVC (Rigid) 350 175 140 58
PVC (Flexible) 325 161 80 25
Polyester (PBT) 425 217 180 81
Polyester (PET) 450 231 210 97
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-029 591
IMS In-Line Color Mixing Nozzle
B1: Nozzles & Nozzle Tips
Why buy an IMS In-Line Color Mixing Nozzle? Flow restriction is minimal. These mixers let you use less
IMS exclusive In-Line Color Mixing Nozzles with their unique, colorant, and they reduce maintenance time and expense.
individual mixing segments perform exceptionally well, and The original IMS In-Line Color Mixing Nozzle — you can’t
for a lot less money than similar units. buy a comparable mixing nozzle for less!
— NON-STOCK NOZZLES —
IMS can manufacture Custom In-Line Color Mixing Nozzles
USE THE REQUEST FOR QUOTATION ON PAGE 594.
r. Techie’
M
s
Use Standard 7/8"-14 Nozzle Tips - See pages 571-579 for Tips
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-030/2-112414 593
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
B1: Nozzles & Nozzle Tips
Body Diameter 1
/8" N.P.T. T/C Hole
11/2" Standard standard
H-13 Standard
1
/4"-28 T/C Hole
standard
/8" Hex
7
More elements
Body Length Thread Length
can be added
for better mixing
Overall Nozzle Length
Specify:
1. Mixing Elements: Yes No NOTE: External heating standard
3. Thermocouple
Thread Size and Location ______________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ______________________ Fax: ( _______ ) ______________________
Address: ________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
594 B13-1-031-111414 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Radius Gauges
3 Bar Quality
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-032-052016 595
IMS Color Dispersion Plug
B1: Nozzles & Nozzle Tips
TM
5
/8" Dia. Plugs fit in a special recess machined into
the nozzle tip seat. (See below)
3
/4" Dia. Plugs fit in a special recess machined into Easily
removed
the rear opening. (See below)
for
cleaning!
4140
tool steel,
28-32 Rockwell C
Buy any RT body and we retrofit it for a dispersion plug — Only $60
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
596 B13-1-033 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Color Dispersion Plug
3 Bar Quality
1/4"
Color Dispersion Plugs
for use in modified Nozzle Tips
IMS # Diameter Depth Hole Count Hole Size Unit Price
9/16"
144182 9/16" 1/4" 19 .025" $21.50
144183 9/16" 1/4" 19 .050" 21.50
Goes between
nozzle body and nozzle tip!
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-034 597
Direct Melt Pressure-Reading Nozzles
B1: Nozzles & Nozzle Tips
3 Bar Quality
TM
Expressly made with Oversize Hex
to withstand high injection pressures
Be sure to specify Internally or Externally Heated,
Internal Design, Overall Nozzle Length, Thread Size
and Type, Rear Opening, Orifice and Radius, Voltage
(if Heaters are ordered,) and /8"-24 T/C hole if 3
3 Bar Quality
Fittings (shown)
Keep material
sold separately
from setting up
in the
nozzle
TYPICAL
HOSE CONNECTION
(Not included in
price of nozzle)
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-036 599
Gas Assist Nozzles and Accessories
®
B1: Nozzles & Nozzle Tips
Select
5 Bar Quality
TM
Save money and improve quality at the same time
Gas-assist injection molding results in stronger parts with • Add-On, Self-Actuating Shutoff with Gas Port also
better uniformity of cross section, while reducing injection prevents nitrogen from entering the barrel during the
pressure. It is ideal for long or irregularly-shaped, hollow parts. nitrogen injection phase. The nitrogen gas pressure
We offer a complete line of accessories for nitrogen gas-assist actuates an internal spring to effect shutoff. This nozzle
molding. Included are add-on gas ports and nozzle bodies includes a gas-assist port.
with gas ports, shutoffs and valves, check valves and in-mold • Add-On Gas Port converts with any standard nozzle to a
gas injection pins. These components are compatible with all gas-assist nozzle.
gas assist molding systems. • Cone (needle) check valve prevents plastic from
• Rotary Resin Shutoff Valve prevents nitrogen from backing up and plugging the nitrogen injection line. It's
entering the barrel during the nitrogen injection phase. easy to install and made of stainless steel.
This valve is hydraulically actuated for positive shutoff. • Spring-loaded check valve also prevents plastic from
Use it in conjunction with removable tip style nozzle backing up and plugging the nitrogen line. This type
bodies having a gas injection port. allows increased nitrogen gas flow while reducing
nitrogen injection pressures.
NOTE: In order for standard nozzles
with gas port and add-on, • In-Mold gas pins permit injection of nitrogen gas directly
self-actuating shutoff with into the mold rather than the nozzle.
gas port to reach recessed Make Stronger,
sprues, die clearance holes
must be at least 43/4" in diameter
More Uniform
Parts
1/8"
Rotary Resin
NPT Port
Shutoff Valve
100%
STOPS Drool!
43/4"
Item #123957
1/8"
NPT Port
Item
#123964
Add-On,
Self-Actuating
Shutoff
with Gas Port 43/4"
Item
#162882
Add-On
Gas Port
Item
#123925 Custom Threads Available
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
600 B13-1-037/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
Specifications and Prices
6" 1.62"
Rotary Resin Shutoff Valve
• Stainless steel
Operating Temperature: 550° F to 600° F
Hydraulic Pressure: 500 psi max.
Nozzle Thread: 13/4"-8 female
Barrel Thread: 13/4"-8 male Patent #5,494,254
Rear Opening: 3
/4" thru bore Requires only two hydraulic hoses, four 3/8" dia. x 51/2" long heater
Hose Fitting: 1
/8"-27 N.P.T. rods and a source of hydraulic power able to deliver 500 psi max.
Dimensions: 75/8" l x 9" w x 43/4" h at 3 gpm with a simple 3-way spring return valve
123957 Rotary Resin Shutoff Valve (for use with Gas Assist) Inquire
132581 Rotary Resin Shutoff Valve (for use without Gas Assist) Inquire
Removable Tip Style Nozzle Bodies with Gas Port 41/4" 61/4" 81/4" 111/4"
• For use with Rotary Resin Shutoff Valve
• 4140 heat treated steel 11/2"
Patent #5,149,546
Tip Thread: female 7/8"-14
Removable Tip Style Nozzle Bodies with Gas Port for use with Rotary Resin Shutoff Valve
Complete with 13/4"-8 rear thread, 3/4" rear opening and 1/4"-28 and 1/8" N.P.T. T/C holes
123964 (5" overall length with tip) Inquire
123895 (7" overall length with tip) Inquire
123896 (9" overall length with tip) Inquire
123897 (12" overall length with tip) Inquire
Add-On, Self-Actuating Shutoff with Gas Port A
• For use with any standard nozzle and tip • 4140 heat treated steel
Tip Thread: 7/8"-14 female Rear Opening: 1/2" dia.
Nozzle Thread: 7/8"-14 male Overall Length: 33/8" Patent #5,149,546
123925 Add-On Gas Port for use with any standard nozzle tip (shutoff required) $507.00
Check Valves Cone 1/8" Spring 1/8"
NPT NPT
• Cone (needle) and spring loaded styles Patent
• Fittings included Patent #5,149,564 Pending
123927 Check Valves with Fittings — Stainless steel cone (needle) style $119.25
126733 Check Valves with Fittings — Stainless steel spring loaded style 298.15
Accessories and Spare Parts
147174 6' length gas assist hose Inquire 147809 Gas assist gas hose line connector - 1/8 NPT Inquire
160063 8' length gas assist hose Inquire 147810 Gas assist gas hose line connector - 1/4 NPT Inquire
147175 10' length gas assist hose Inquire 160062 Nitrogen gas line connector* Inquire
147176 15' length gas assist hose Inquire 130564 Replacement internal spring for Item #126847 Inquire
147177 20' length gas assist hose Inquire 131846 Replacement internal cone for Item #126847 Inquire
160064 25' length gas assist hose Inquire 130634 Replacement internal spring for Item #126733 Inquire
*For joining (2) hoses for extended length. Open union - No check valve function
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-037/2-071315 601
r. Techie’
B1: Nozzles & Nozzle Tips
M
CONVERTING FRACTIONAL INCHES
s
Te c
h T i ps
TO DECIMALS AND MILLIMETERS
Fraction Decimal MM Fraction Decimal MM
602 B13-1-038-091914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Combination Wrenches
3 Bar Quality
Fits Fits
Purchasers also order: 7/8" Hex 11/16" Hex
• Low Cost Mold Clamp Bolts, page 72
Item # Fits Hex Size Nominal OAL Box Weight Unit Price
109151 7
/8" 11" 12 point 9 oz. $10.25
122201 11/16" 14" 12 point 11 oz. 14.80
149120 1 /4"1
16" 12 point 1.6 lbs 20.55
109150 15/8" 23" 12 point 3 lbs. 39.25
For faster setups, ensure you have the proper tools at hand.
Te c
h T i ps
TM
Measure the gap between materials
3 Bar Quality
Thumbwheel locking
SIZES
136488 (mm): .05, .10, .15, .20, .25, .30, .35,
.40, .45, .50, .55, .60, .65, .70, .75, .80, .85,
.90, .95, 1.00
136489 (inches): .0015, .002, .0025,
.003, .004, .005, .006, .007, .008,
.009, .010, .011, .012, .013, .014,
.015, .016, .017, .018, .019, .020,
.021, .022, .023, .024, .025
Pitch Gauges
Determine pitch quickly and easily
Thumbwheel locking
SIZES
#136490 (threads per mm): .25, .30, .35, .40, .45,
.50, .55, .6, .65, .70, .75, .8, .85, .9, 1.0, 1.1, 1.2,
1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2.0, 2.5
#136492 (threads per inch): 4, 41/2, 5, 51/2, 6, 7, 8, 9,
10, 11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 25, 26,
27, 28, 30, 32, 34, 36, 38, 40, 42 Simply match pitch teeth with
#136491 (threads per inch): 4, 4 /2, 5, 5 /2, 6, 7, 8, 9, 10,
1 1 internal or external threads
11, 111/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 25, 26, 27,
28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54,
56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
604 B13-1-040 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
B1: Nozzles & Nozzle Tips
IMS Orifice Drills
For nozzles 3 Bar Quality
TM
IN STOCK
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-041 605
IMS High Heat — Copper Flake Thread Lube
B1: Nozzles & Nozzle Tips
TM Anti-seize compound
3 Bar Quality
r. Techie’
M
s
Copper Flake Thread Lube is the preferred compound for nozzle threads, but you can also
use High Heat Tape with PTFE — see page 247
Te c
h T i ps
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
606 B13-1-042-022216 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Heat Transfer and Anti-Seize Compounds
These products consists of metal powders blended into a grease carrier to allow it to be applied. The grease carrier
will break down at the temperature listed, but the products will continue to provide heat transfer up to the listed
temperature limits of the metal powders.
Both excellent heat transfer compounds for use
with cartridge heaters and heater bands.
Good Up
to 600° F —
Will Not
Harden
Improve surface contact between heaters and
equipment, extending heater life, providing better
response times and reducing energy costs. GREEN Products
The only A limited use
Eliminates trouble- PROLONGS HEATER LIFE
AFFORDABLE, causing air pockets Heat Transfer
HIGH HEAT Distributes heat CUTS ENERGY COSTS
Compound
Compound more uniformly formulated
for continuous use Reduces scale and ENSURES CONSISTENT for continuous use
up to oxidation HEAT TRANSFER up to
Helps prevent
600° F seizing and galling
FACILITATES
HEATER REMOVAL 350° F
Specifications Specifications
Melting point of Copper: 1981° F Melting point of Copper: 1981° F
*Max. Continuous Service 600° F – For Cartridge Heaters Melting point of Aluminum: 1220° F
Temp. for Carrier Medium: and Threads (not exposed to air) Melting point of Graphite: in air, 750° F to 1100° F
500° F – For Heater Bands in a reduced oxygen
(exposed to air) environment, 6700° F
Max. Continuous Service Point: 350 F
Also an excellent anti-seize compound for use on Grease Media Decomposition: 550° F
end cap bolts, and nozzle and screw tip threads.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-1-043 607
Perforated DROOL DISC™
B1: Nozzles & Nozzle Tips
3 Bar Quality
TM
Save
Downtime
SPECIFICATIONS
Max. Temperature: 700° F
Size: 6" dia. by 1/8" thick
DROOL DISC™
Heater Band Protectors
Item #162524
$14.75 ea
IN STOCK
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
608 B13-1-044 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Ball Check Screw Tips
Pages 610 – 618
®
The
Original Free Flow Screw Tips
Buyers Pages 620 – 640
Guide
BRODY-ring® Seals
Engineered Pages 641 – 643
Feed Screws
Barrel
Barrels
Repair Service
Pages 663 – 668
End Cap
Repair Service
Pages 670 – 673
IMS Exclusive
SPIRAL™ System
Pages 674 – 676
Barrel Insulation
Pages 685 – 688
Multimeters
Pages 689 – 692
THE
al
Origin
ALVE
BALL V ...
TIP!
ified
...mod y’s
d a
for to ls!
e r ia
B2: Screws & Barrels
mat
FEATURES
• GUIDED BALL IDEAL FOR FILLED PLASTICS
Ball travels in a straight line - shuts-off faster. IMS Style BC-RS insert tips are for use on plastics with more
than 10% abrasive filling or where much tramp metal is found.
• PIN-FREE BALL RETAINER
Tip can have external surfaces hard coated with PVD or CVD
Allows unrestricted material flow.
(both titanium nitride coatings). Inquire for prices of specially
• REPLACEABLE SEAT treated tips for filled plastics.
Hardened Ball Seat easily replaced when worn.
• PASSAGES SIZED RIGHT
Each insert, ball and seat is sized to your screw capacity
THE ORIGINAL BALL-TYPE SCREW TIP
(unlike cheap designs, where one size of ball and insert is
IMS Tool Steel Tips were the first American-made ball-type, non-
used on many sizes of screw tips).
return valves to replace old-style sliding rings. Avoid cheap
• HARD OUTER-WEAR SURFACE imitations! Look for the genuine IMS mark on the end of the
Tool Steel Screw Tips outlast other types many times shank! You’ll cut your press downtime costs with IMS Chrome-
over. Wear-resistant coatings are available at extra cost. Vanadium Tool-Steel Screw Tips.
Arburg
25mm M12 x 1.75mm RH 102430 RFQ*
30mm M12 x 1.75mm RH 102479 RFQ*
35mm M18 x 1.5mm RH 113471 124020
40mm M18 x 1.5mm RH 125193 124019
Autojector
1" 1/2"-13 LH 122082 RFQ*
Battenfeld
18mm M8 x 1.25mm LH 120982 RFQ*
B2: Screws & Barrels
Beloit
1-1/2" 3/4"-16 LH 102454 RFQ*
1-1/2" 3/4"-16 LH RFQ* 102610
2-1/4" 7/8"-9 LH RFQ* 102721
2-1/2" 1-1/8"-7 LH RFQ* 115465
2-1/2" 1"-8 LH 102404 102695
3" 1-1/4"-7 LH 102538 RFQ*
Boy
24mm M12 x 1.75mm LH 113852 119788
28mm M14 x 2.0mm LH RFQ* 136407
38mm M16 x 2.0mm LH 116073 RFQ*
Cincinnati
28mm M12 x 1.75mm LH RFQ* 137370
40mm M20 x 2.5mm LH 125115 RFQ*
55mm M27 x 3.0mm LH 110870 112117
90mm M48 x 5.0mm LH 124120 143343
100mm M52 x 5.0mm 137757 RFQ*
110mm M56 x 5.5mm LH 131641 137806
*RFQ=Request for Quote continued on next page
Call 866-467-9001 for a Product Specialist
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
612 B13-2-004/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Ball Check Screw Tips
IMS Item Nos.
Make of Press With With
Screw Tip OD Screw Tip Thread Welded in Pin Replaceable Seat
Cincinnati
1-3/4" 3/4"-16 LH 102505 102681
1-5/8" 3/4"-10 LH 113321 RFQ*
2" 1"-8 LH - 30° Nose 102458 102613
2" 1"-8 LH - 45° Nose 113302 RFQ*
2" 3/4"-16 LH RFQ* 102740
2-1/4" 1"-8 LH 110283 RFQ*
2-1/2" 1-1/4"-7 LH RFQ* 102751
2-1/2" 1-1/4"-12 LH 102398 102713
2-1/2" 1-1/4"-7 LH 102434 RFQ*
Egan
1-3/4" 3/4"-10 LH 102532 102610
2" 7/8"-9 LH 102519 115465
2-1/2" 1-1/8"-7 LH 102487 102640
2-1/2" 1-3/4"-6 LH 102470 RFQ*
3" 1-5/8"-6 LH 129897 102669
3-1/2" 1-3/4"-6 LH RFQ* 102645
4-1/2" 2-1/4"-6 LH 102495 102711
5-1/4" 2-3/4"-6 LH 102463 RFQ*
6" 3"-6 LH 102396 RFQ*
*RFQ=Request for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-004/2 613
Ball Check Screw Tips
IMS Item Nos.
Make of Press With With
Screw Tip OD Screw Tip Thread Welded in Pin Replaceable Seat
Engel
25mm M12 x 1.75mm RH 112792 RFQ*
30mm M12 x 1.75mm RH 112797 RFQ*
35mm M12 x 1.75mm RH 111034 119166
40mm M16 x 2.0 RH RFQ* 119161
60mm M30 x 3.5 RH 136426 115440
70mm M36 x 4mm RH RFQ* 122969
Farrell
2.1" 1"-8 LH 102481 102612
B2: Screws & Barrels
Fellows
1-3/4" 5/8"-11 LH RFQ* 102745
2" 3/4"-10 LH 102427 RFQ*
3" 1-5/8"-6 LH 102537 RFQ*
3-1/2" 1-3/4"-8 LH 102518 RFQ*
HPM
1-1/2" 5/8"-11 LH RFQ* 102731
1-3/4" 3/4"-10 LH 102494 102710
2" 7/8"-9 LH 102531 102761
2-1/4" 1"-8 LH RFQ* 118990
2-1/2" 1-1/8"-7 LH 102420 102756
3" 1-5/8"-6 LH 102445 102737
3-1/2" 1-3/4"-6 LH 102395 102685
4" 2"-6 LH 102510 142078
4-1/2" 2-1/4"-6 LH 102486 102618
5-1/4" 2-3/4"-6 LH RFQ* 102660
6" 3"-6 LH RFQ* 141674
7" 3-1/2"-6 LH RFQ* 109809
*RFQ=Request for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
614 B13-2-004/3 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Ball Check Screw Tips
IMS Item Nos.
Make of Press With With
Screw Tip OD Screw Tip Thread Welded in Pin Replaceable Seat
Husky
55mm M27 x 2.0mm LH 102438 RFQ*
70mm M36 x 4.0mm LH 125363 RFQ*
85mm M45 x 4.0mm LH 123995 RFQ*
85mm M48 x 5.0mm LH RFQ* 122005
100mm M52 x 5.0mm LH 144148 144714
110mm M52 x 5.0mm LH 123932 123994
IMPCO
2" 7/8"-9 LH 102432 RFQ*
Jaco
1-1/4" 5/8"-11 LH 119449 RFQ*
Kawaguchi
50mm M30 x 3.0mm LH 102517 RFQ*
70mm M40 x 4.0mm LH 102509 RFQ*
80mm TR42 x 4.0mm LH RFQ* 126949
Klockner
80mm M48 x 4.0mm LH 110550 RFQ*
Krauss-Maffei
45mm M24 x 3.0mm LH RFQ* 124682
Lombard
1-5/8" 3/4"-10 LH 111155 RFQ*
3-1/2" 1-5/8"-8 LH RFQ* 120151
McNeil
1-3/8" 5/8"-18 LH RFQ* 120149
MIR
100mm 1-3/4"-5 LH RFQ* 114280
*RFQ=Request for Quote continued on next page
Mitsubishi
70mm M39 x 4.0mm LH RFQ* 120127
Natco
2-1/4" 1"-8 LH 102401 102765
70mm 1-1/8"-12 LH 102450 RFQ*
70mm 1-1/8"-6 LH 102540 RFQ*
90mm 1-1/2"-12 LH 102406 RFQ*
90mm 1-1/2"-6 LH 130692 102649
105mm 1-3/4"-6 LH 102523 102626
B2: Screws & Barrels
New Britain
2-1/2" 1-1/4"-8 LH RFQ* 127041
3-1/2" 1-3/4"-8 LH RFQ* 126200
30mm TR18 x 2.5mm LH RFQ* 102760
45mm TR27 x 3.0mm LH 102516 RFQ*
55mm TR35 x 3.0mm LH 102443 102683
Newbury
1" 1/2"-13 LH 102485 102616
1-1/4" 5/8"-11 LH 102508 102754
1-3/8" 5/8"-11 LH 102387 102656
1-1/2" 3/4"-10 LH 102461 RFQ*
1-3/4" 7/8"-9 LH 102437 102704
2" 1"-8 LH 102412 102680
2-1/4" 1"-8 LH RFQ* 144210
Niigata
76mm M42 x 3.0mm LH 110208 RFQ*
Nissei
71mm TR44 x 3.0mm LH 110266 142056
80mm TR48 x 3.0mm LH RFQ* 125537
90mm TR55 x 3.0mm LH 110264 RFQ*
Reed
2" 1"-8 LH 102514 102632
2-1/8" 1"-8 LH RFQ* 102611
2-1/4" 1"-8 LH 102448 RFQ*
2-1/2" 1-1/4"-8 LH 102424 102714
2-3/4" 1-1/2"-8 Acme LH 102399 102722
*RFQ=Request for Quote continued on next page
Call 866-467-9001 for a Product Specialist
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
616 B13-2-004/5 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Ball Check Screw Tips
IMS Item Nos.
Make of Press With With
Screw Tip OD Screw Tip Thread Welded in Pin Replaceable Seat
Reed
3" 1-3/8"-8 LH 102521 102672
3-3/4" 1-7/8"-8 LH RFQ* 102625
3-5/16" 1-3/4"-5 LH 102496 102648
4-1/8" 2-1/4"-8 LH 121133 RFQ*
4-1/4" 2"-8 LH 102405 RFQ*
Stokes
1-1/4" 1/2"-20 LH 102441 RFQ*
1-1/4" 1/2"-13 LH 121096 113912
Stubbe
45mm M24 x 3.0mm LH 102526 RFQ*
Toshiba
25mm M12 x 1.5mm LH 114153 RFQ*
40mm M22 x 2.0mm LH 124107 RFQ*
95mm M45 x 4.0mm LH RFQ* 127231
100mm M50 x 4.0mm LH RFQ* 119934
105mm M50 x 4.0mm LH 126788 RFQ*
115mm M60 x 4.0mm LH 126625 RFQ*
Trubor
31mm 5/8"-11 LH 110753 RFQ*
Uniloy - Milacron
45mm M24 x 3.0mm LH 102526 RFQ*
45mm M18 x 1.5mm LH 124339 RFQ*
*RFQ=Request for Quote continued on next page
Van Dorn
1-3/8" 1-3/8"-8 LH RFQ* 138205
25mm 1/2"-13 LH 114309 RFQ*
30mm 5/8"-11 LH 102397 102646
35mm 3/4"-10 LH 102414 102694
40mm 3/4"-10 LH 102488 102670
45mm TR20 x 2.0 LH RFQ* 143067
50mm 1"-8 LH 102422 102624
57mm 1-1/4"-7 LH 102389 102662
65mm 1-3/8"-6 LH 102471 102763
B2: Screws & Barrels
24 oz 30 oz
Hot Mill Gloves Hot Mill Gloves
Item No. 136369 Item No. 136370
s
Screw Tip Wear Issues
Te c
h T i ps Cracked Ring: Excessive barrel wear in the metering area. Unmelted plastic
in the valve can cause a situation where the ring will not seat
against the rear seat. This is usually due to a poor start up or
shut down
Broken Stud: This is usually due to a poor start up or shut down procedures.
Failure to make sure barrel is up to operating temperature at start
up or failure to properly purge barrel and screw at shut down.
Slow Recovery: Excessive back pressure is the most common cause. However, if
there is excessive wear between the front seat and ring it can
impede the movement of plasticized material and screw recovery
can be drastically affected.
H-13 Nitrided
Tool steel with good strength that is thru-hardened and ground dimensionally then nitrided for
72 hours. A tough material good for general applications.
CPM9V
Highly wear resistant tool steel with a high percentage of vanadium carbide. Excellent for abra-
sive applications.
CPM420V
Ideal for highly corrosive applications. 420V also has significant wear resistant characteristics.
NOTE: If your screw is turning during injection, it’s a good indication that your
non return valve is leaking.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-005 619
Free Flow Screw Tip Assemblies
3 Bar Quality
TM
# EXTRA-DEEP FLUTES
••Minimize frictional heat
• Allow free flow of plastic
B2: Screws & Barrels
OR
Hand tighten screw tips. Use a wrench, only if needed, to remove the tips.
Te c
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
620 B13-2-006/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Arburg
20mm M10x1.5 RH 60° RFQ** 132379 RFQ** RFQ**
22mm M12x1.75 RH 60° 100905 119050 RFQ** 111168
22mm M12x1.75 RH 30° 147821 147820 RFQ** RFQ**
25mm M12x1.75 RH 70° RFQ** 144113 RFQ** RFQ**
25mm M12x1.75 RH 120° RFQ** 132342 RFQ** 123507
30mm M14x1.5 RH 80° 150348 136275 RFQ** 118858†
30mm M14x1.5 RH 40° RFQ** 150349 RFQ** RFQ**
35mm M18x1.5 RH 60° 100857 144100 RFQ** 122398
Battenfeld
22mm M12x1.75 LH 90° 149442 151057 RFQ** RFQ**
30mm M14x1.5 LH 90° 160079 160080 RFQ** 116245
35mm M16x1.5 LH 90° RFQ** 133706 RFQ** 113974
40mm M20x2.0 LH 90° 132367 131629 RFQ** 122053
45mm M24x2.0 LH 90° 160080 158272 RFQ** 121681
50mm M24x2.0 LH 90° 158272 160081 RFQ** 120194
55mm M24x2.0 LH 90° 132942 131657 RFQ** 123510
60mm M24x2.0 LH 90° 160082 132162 RFQ** 115286
65mm M24x2.0 LH 90° RFQ** 123905 RFQ** RFQ**
70mm M30x3.5 LH 90° RFQ** 122780 RFQ** 115859
80mm M35x2.0 LH 90° RFQ** RFQ** RFQ** 123511
85mm M35x2.0 LH 90° 160072 160073 RFQ** 115544
96mm M40x2.0 LH 90° RFQ** RFQ** RFQ** 122078
100mm M60x2.0 LH 30° RFQ** RFQ** RFQ** 119972
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/2-090116 621
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Beloit
1-1/2" 3/4"-16 LH 60° RFQ** RFQ** RFQ** 103367
1-3/4" 7/8"-14 LH 60° RFQ** RFQ** RFQ** 103471
2-1/2" 1"-8 LH 60° RFQ** RFQ** RFQ** 103523
2-1/2" 1-1/8"-7 LH 60° RFQ** RFQ** RFQ** 114362
2-1/8" 7/8"-9 LH 60° RFQ** RFQ** RFQ** 103394
3-1/2" 1-3/4"-5 LH 60° RFQ** RFQ** RFQ** 103548
Boy
B2: Screws & Barrels
Cincinnati
1" 7/16"-20 LH 90° RFQ** RFQ** RFQ** 103518
1-5/16" 5/8"-11 LH 60° RFQ** RFQ** RFQ** 103428
1-5/8" 3/4"-10 LH 90° 150351 150350 RFQ** 103382
1-5/8" 3/4"-10 LH 120° 132986 132164 RFQ** 103438
2" 1"-8 LH 90° RFQ** RFQ** RFQ** 103301
2" 1"-8 LH 120° 132347 RFQ** RFQ** 103403
2-1/2" 1-1/4"-7 LH 90° 140388 RFQ** RFQ** 103309
2-1/2" 1-1/4"-7 LH 120° 160006 RFQ** RFQ** RFQ**
2-1/2" 1-1/4"-12 LH 120° RFQ** RFQ** RFQ** 103531
2-1/4" 1"-8 LH 90° RFQ** 132165 RFQ** 124067
2-3/4" 1-1/4"-7 LH 90° RFQ** 131626 RFQ** 103489
2-3/4" 1-1/4"-12 LH 120° RFQ** RFQ** RFQ** 103451
3" 1-5/8"-6 LH 90° RFQ** RFQ** RFQ** 122352
3-1/2" 1-1/2"-12 LH 120° RFQ** 132166 RFQ** 103460
3-1/2" 1-1/2"-6 LH 90° 145612 RFQ** 145613 131790
3-1/4" 1-1/2"-6 LH 90° 148538 131963 RFQ** 103482
3-1/4" 1-1/2"-12 LH 120° 132321 RFQ** 103375
4-1/2" 2"-6 LH 120° 140488 RFQ** RFQ** RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
622 B13-2-006/3 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Cincinnati
4-1/2" 2"-6 LH 90° 133438 133439 RFQ** RFQ**
4-1/2" 2"-8 LH 90° 132404 RFQ** RFQ** 113238
4-1/2" 2"-12 LH 120° RFQ** RFQ** RFQ** 103329
6" 2-1/2"-12 LH 90° RFQ** RFQ** RFQ** 103509
18mm (Robo: I Series) M9x1.5 LH 60° 160002 160004 RFQ** RFQ**
18mm (Robo: R Series) M10x1.5 LH 90° 160003 160005 RFQ** RFQ**
22mm (Robo: I Series) M12x1.75 LH 60° RFQ** 148590 RFQ** RFQ**
22mm (Robo: R Series) M12x1.75 LH 90° RFQ** 148591 RFQ** RFQ**
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/4 623
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Cincinnati (continued)
70mm (Vista) M36x4.0 LH 60° 136178 RFQ** RFQ** RFQ**
80mm (Vista) M42x4.5 LH 60° 137819 144151 RFQ** 123233
90mm M48x5.0 LH 60° 143426 RFQ** 138891 RFQ**
100mm M52x5.0 LH 60° 134367 137428 147173 RFQ**
110mm M56x5.5 LH 60° 150340 RFQ** RFQ** RFQ**
125mm M64x6.0 LH 60° 132313 160076 RFQ** RFQ**
140mm M72x6.0 LH 60° 147883 137895 RFQ** RFQ**
200mm M100x6.0 LH 60° 147130 147131 RFQ** RFQ**
B2: Screws & Barrels
Demag
18mm M8x1.25 LH 22° RFQ** 136420 RFQ** RFQ**
18mm M10x1.5 LH 60° RFQ** 148572 RFQ** RFQ**
22mm M10x1.5 LH 60° 160045 160044 160046 RFQ**
25mm M10x1.5 LH 22° 142324 142322 RFQ** RFQ**
25mm M10x1.5 LH 60° 142325 142323 RFQ** RFQ**
30mm M12x1.75 LH 60° 145641 145642 145640 RFQ**
35mm M14x2.0 LH 60° RFQ** 134162 RFQ** RFQ**
40mm M16x2.0 LH 60° RFQ** 134068 RFQ** RFQ**
45mm TR20x3.0 LH 60° 138125 140303 RFQ** RFQ**
50mm TR22x3.0 LH 60° 150372 150373 RFQ** RFQ**
60mm TR27x3.0 LH 60° 147200 144156 150389 RFQ**
70mm TR30x3.0 LH 60° 140540 137794 RFQ** RFQ**
70mm TR30x3.0 LH 22° RFQ** 131659 RFQ** RFQ**
80mm TR35x3.0 LH 60° 140260 145643 145638 RFQ**
95mm TR40x3.0 LH 60° 150374 150375 RFQ** RFQ**
110mm TR50x3.0 LH 60° 132154 148576 RFQ** RFQ**
Egan
1-1/4" 1/2"-13 LH 90° RFQ** RFQ** RFQ** 120077
1-3/4" 3/4"-10 LH 90° RFQ** RFQ** RFQ** 103601
2" 7/8"-9 LH 90° RFQ** RFQ** RFQ** 103722
2-1/2" 1-1/8"-7 LH 90° RFQ** RFQ** RFQ** 103662
3" 1-5/8"6 LH 90° RFQ** RFQ** RFQ** 103685
3-1/2" 1-3/4"-6 LH 90° 147137 147136 147135 103746
4" 2"-6 LH 90° RFQ** RFQ** RFQ** 103623
4-1/2" 2-1/4"-6 LH 90° RFQ** RFQ** RFQ** 103564
5-1/4" 2-3/4"-6 LH 90° RFQ** RFQ** RFQ** 103705
6" 3"-6 LH 90° RFQ** RFQ** RFQ** 103646
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
624 B13-2-006/5 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Engel
18mm M10x1.5 RH 60° 150317 142281 RFQ** RFQ**
22mm M12x1.75 RH 60° 150512 138877 RFQ** RFQ**
25mm M12x1.75 RH 60° 132061 132235 RFQ** 123517
30mm M12x1.75 RH 60° 144146 136413 RFQ** 110824
35mm M16x2.0 RH 60° 147785 147786 RFQ** RFQ**
35mm M12x1.75 RH 60° 147787 137179 RFQ** 123518
40mm M16x2.0 RH 60° 136011 147789 147788 RFQ**
45mm M20x2.5 RH 60° 150676 144147 RFQ** RFQ**
Farrel
1-5/8" 3/4"-10 LH 45° RFQ** RFQ** RFQ** 103661
2" 1"-8 LH 45° RFQ** RFQ** 140383 103600
2.1" 1"-8 LH 44° RFQ** RFQ** RFQ** 103578
2.8" 1-3/8"-8 LH 45° RFQ** RFQ** RFQ** 103720
2-1/2" 1-1/4"-7 LH 45° RFQ** RFQ** RFQ** 103638
3.6" 1-5/8"-8 LH 45° 145444 145445 145443 123519
4-1/4" 2"-8 LH 60° RFQ** RFQ** RFQ** 110776
4-3/4" 2-1/4"-8 LH 45° RFQ** RFQ** RFQ** 113896
Fellows
1-3/4" 5/8"-11 LH 30° RFQ** RFQ** RFQ** 103613
2" 3/4"-10 LH 30° RFQ** RFQ** RFQ** 103562
2" 7/8"-9 LH 90° 138235 RFQ** RFQ** RFQ**
2-1/2" 1-1/8"-7 LH 30° RFQ** RFQ** RFQ** 103759
3" 1-5/8"-6 LH 90° RFQ** RFQ** RFQ** 103703
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/6 625
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
HPM
1-1/2" 5/8"-11 LH 60° RFQ** RFQ** RFQ** 103710
1-3/4" 3/4"-10 LH 60° 147145 147146 RFQ** 103588
2" 7/8"-9 LH 60° 131977 RFQ** RFQ** 103605
2-1/4" 1"-8 LH 60° 160115 160116 RFQ** 124370
2-1/2" 1-1/8"-7 LH 60° 138591 RFQ** RFQ** 103750
3" 1-5/8"-6 LH 60° 150335 151066 RFQ** 103628
3-1/2" 1-3/4"-6 LH 60° 160047 160048 160049 103569
4" 2"-6 LH 60° 148560 131438 RFQ** 103651
B2: Screws & Barrels
Husky
1-3/4" 1"-12 LH RFQ** RFQ** RFQ** 114373
42mm M20x2.5 LH 60° 137022 RFQ** RFQ** RFQ**
60mm M30x3.5 LH 60° 132080 RFQ** RFQ** RFQ**
70mm M36x4.0 LH 60° 145619 145620 RFQ** RFQ**
80mm M42x4.5 LH 30° RFQ** 144397 RFQ** RFQ**
140mm M72x6.0 LH 60° RFQ** 144157 RFQ** RFQ**
Impco
2-1/2" 1-1/2"-6 LH 40° 140237 RFQ** RFQ** RFQ**
2-13/16" 1-1/4"-8 LH 120° RFQ** RFQ** RFQ** 103695
Jaco
1-1/4" 5/8"-11 LH 50° 137822 136417 RFQ** RFQ**
JSW
28mm M16x2.0 LH 30° 147189 137605 147188 RFQ**
40mm TR22x3.0 LH 22° RFQ** 138217 RFQ** RFQ**
45mm TR24x3.0 LH 22° 147190 144193 144192 RFQ**
46mm TR24x3.0 LH 17° 147192 147193 147191 RFQ**
58mm TR36x3.0 LH 20° RFQ** RFQ** RFQ** 121714
84mm TR47x3.0 LH 19° 147195 145671 147194 RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
626 B13-2-006/7-022216 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Kawaguchi
25mm TR13x2.0 LH 32° RFQ** RFQ** RFQ** 112406
30mm M16x1.5 LH 40° 144227 RFQ** RFQ** RFQ**
30mm TR15x2.0 LH 40° 148592 145412 145413 RFQ**
35mm TR20x2.0 LH 23° 144116 RFQ** RFQ** RFQ**
36mm M20x2.0 LH 40° RFQ** RFQ** RFQ** 103678
36mm TR20x2.0 LH 40° RFQ** RFQ** RFQ** 129677
40mm M20x2.0 LH 40° RFQ** RFQ** RFQ** 103617
40mm TR20x2.0 LH 40° RFQ** 132815 RFQ** 110432
Klockner/Ferromatic
60mm M30x3.5 LH 90° 115002 RFQ** RFQ** RFQ**
115mm M68x4.0 LH 90° 147132 147133 RFQ** RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/8 627
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Krauss-Maffei
25mm M12x1.75 LH 60° RFQ** RFQ** RFQ** 114320
35mm M18x2.5 LH 60° RFQ** 148540 RFQ** RFQ**
50mm M27x3.0 LH 60° 150370 142243 RFQ** RFQ**
60mm M24x3.0 LH 60° RFQ** RFQ** RFQ** 116551
60mm M33x3.5 LH 60° 149037 160122 RFQ** RFQ**
80mm M42x4.5 LH 60° 158286 RFQ** RFQ** RFQ**
105mm TR55x3.0 LH 60° 148542 148543 148541 RFQ**
B2: Screws & Barrels
Lester
1-3/4" M24x3.0 LH 90° RFQ** RFQ** RFQ** 115893
Lombard
1-5/8" 3/4"-10 LH 45° RFQ** RFQ** RFQ** 118154
2-3/4" 1-3/8"-6 LH 45° RFQ** RFQ** RFQ** 111218
3" 1-1/2"-6 LH 45° RFQ** RFQ** RFQ** 122001
3-1/2" 1-5/8"-8 LH 45° RFQ** RFQ** RFQ** 110805
4-1/4" 2"-12 LH 45° RFQ** RFQ** RFQ** 114870
Meiki
50mm M24x12.0 LH 30° 150977 RFQ** RFQ** RFQ**
Mitsubishi
28mm M16x2.0 LH 20° 148599 148601 RFQ** RFQ**
28mm M12x1.75 LH 20° 148598 148600 RFQ** RFQ**
36mm M22x2.5 LH 22° 150337 150338 RFQ** RFQ**
50mm M27x3.0 LH 27° 135708 RFQ** RFQ** RFQ**
57mm M33x3.5 LH 20° 148568 148603 RFQ** RFQ**
62mm M36x4.0 LH 26° 148522 RFQ** RFQ** RFQ**
70mm M39x4.0 LH 26° 148657 RFQ** RFQ** RFQ**
80mm M45x4.5 LH 30° 144219 144221 144222 113878
90mm M48x5.0 LH 30° 148678 RFQ** RFQ** RFQ**
Moslo/Reed
1-5/8" 3/4"-10 LH 30° RFQ** RFQ** RFQ** 110711
Multiplas
76mm M40x3.0 LH 30° 137335 RFQ** RFQ** RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
628 B13-2-006/9 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Natco
2-1/4" 1"-8 LH 30° RFQ** RFQ** RFQ** 103594
2-1/4" 1-1/2"-6 LH 30° RFQ** RFQ** RFQ** 112786
3-1/4" 1-3/8"-6 LH 21° RFQ** RFQ** RFQ** 123009
3-1/4" 2"-6 LH 21° RFQ** RFQ** RFQ** 113548
70mm 1-1/8"-6 LH 45° RFQ** RFQ** RFQ** 110030
90mm 1-1/2"-6 LH 45° RFQ** RFQ** RFQ** 103676
105mm 1-3/4"-6 LH 20° 132414 RFQ** RFQ** 103615
120mm 2"-6 LH 21° 134057 RFQ** RFQ** RFQ**
Negri Bossi
38mm M16x1.5 LH 50° RFQ** RFQ** RFQ** 112853
40mm M18x1.5 LH 90° 150693 RFQ** RFQ** RFQ**
New Britain
1-5/8" 3/4"-16 LH 60° RFQ** RFQ** RFQ** 123532
2" 1"-8 LH 60° RFQ** 147187 140383 RFQ**
2-1/2" 1-1/4"-8 LH 60° RFQ** RFQ** RFQ** 115326
3-1/2" 1-3/4"8 LH 60° RFQ** RFQ** RFQ** 125551
3-1/4" 1-1/2"-8 LH 60° RFQ** RFQ** RFQ** 120118
36mm TR20x3.0 LH 20° RFQ** RFQ** 142191 RFQ**
55mm TR35x3.0 LH 45° RFQ** RFQ** 137541 RFQ**
Newbury
1" 1/2"-13 90° 147143 134331 RFQ** 126037
1" 1/2"-13 45° 147142 133308 RFQ** 103726
1-1/4" 5/8"-11 90° RFQ** 124868 RFQ** RFQ**
1-1/4" 5/8"-11 60° 143726 136253 RFQ** 103583
1-3/8" 5/8"-11 120° 144701 136276 RFQ** 103560
1-3/8" 5/8"-11 60° 144149 136401 RFQ** RFQ**
1-1/2" 3/4"-10 120° 147869 147871 RFQ** 103643
1-1/2" 3/4"-10 60° 147868 147870 RFQ** RFQ**
1-3/4" 7/8"-9 120° 148516 RFQ** RFQ** RFQ**
1-3/4" 7/8"-9 60° 137135 136412 RFQ** 103622
2" 1"-8 120° RFQ** RFQ** RFQ** 103701
2-1/4" 1"-8 60° RFQ** RFQ** RFQ** 124735
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/10 629
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Niigata
35mm M18x2.5 70° RFQ** 142327 RFQ** RFQ**
40mm M20x2.5 70° RFQ** 137893 RFQ** RFQ**
45mm M24x3.0 70° 145258 132171 RFQ** RFQ**
52mm M27x3.0 70° 147860 143012 RFQ** RFQ**
76mm M42x3.0 70° 140544 RFQ** RFQ** RFQ**
90mm M48x3.0 50° RFQ** RFQ** 138812 RFQ**
Nissei
B2: Screws & Barrels
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
630 B13-2-006/11 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Reed
1-5/8" 3/4"-10 30° RFQ** RFQ** RFQ** 103717
1-5/8" 7/8"-9 60° RFQ** RFQ** RFQ** 123543
2" 1"-8 60° RFQ** 140169 RFQ** 103709
2-1/2" 1-1/4"8 45° RFQ** RFQ** RFQ** 103650
2-1/4" 1"-8 60° RFQ** RFQ** RFQ** 103730
2-3/4" 1-1/2"-8 RFQ** RFQ** RFQ** 103694
3" 1-3/8"-8 45° RFQ** RFQ** RFQ** 103611
3-3/4" 1-7/8"-8 45° RFQ** RFQ** RFQ** 103634
Reed/Lawson
2" 1"-8 120° RFQ** RFQ** RFQ** 103671
2-1/2" 1-1/4"-6 120° RFQ** RFQ** RFQ** 103739
3" 1-3/8"-8 120° RFQ** RFQ** RFQ** 103757
3-3/4" 1-7/8"-8 120° 140253 RFQ** RFQ** 103574
Sandretto
35mm M14x2.0 40° RFQ** 143031 RFQ** RFQ**
55mm M27x3.0 40° 150585 RFQ** RFQ** 131563
65mm M30x3.5 40° RFQ** RFQ** 144551 129603
Shinwa-Seiki
24mm M12x1.75 36° RFQ** RFQ** 150668 RFQ**
28mm M12x1.5 42° RFQ** RFQ** RFQ** 123356
40mm M20x2.5 36° RFQ** 150669 RFQ** RFQ**
50mm M27x3.0 50° 142237 RFQ** RFQ** RFQ**
55mm M30x3.5 RFQ** RFQ** RFQ** 110286
60mm M36x3.0 50° 142242 RFQ** RFQ** RFQ**
70mm M36x3.0 36° RFQ** RFQ** 150310 RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/12 631
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Stokes
1-1/4" 1/2"-20 60° RFQ** RFQ** RFQ** 112978
1-1/4" 9/16"-18 90° RFQ** RFQ** RFQ** 103602
1-5/8" 3/4"-16 90° RFQ** 136408 RFQ** 125019
2" 1"-8 60° RFQ** RFQ** RFQ** 112305
2" 1"-12 90° RFQ** RFQ** RFQ** 103581
2-1/2" 1-1/8"-12 90° RFQ** 145582 145609 103698
3" 1-3/8"-12 60° RFQ** RFQ** RFQ** 103724
3-1/2" 1-5/8"-12 60° 138563 RFQ** RFQ** 103748
B2: Screws & Barrels
Sumitomo
16mm M8x1.0 70° 147156 137620 147157 RFQ**
18mm M9x1.0 60° 145607 145606 145608 RFQ**
20mm M10x1.25 60° RFQ** RFQ** 150336 RFQ**
22mm M10x1.25 60° RFQ** 136416 148597 RFQ**
25mm M18x2.0 60° RFQ** 140639 RFQ** RFQ**
32mm M16x1.5 60° 131881 RFQ** RFQ** RFQ**
36mm M16x1.5 60° 125404 RFQ** RFQ** RFQ**
40mm M20x2.0 60° 148551 148552 RFQ** RFQ**
45mm M20x2.0 60° 138127 RFQ** RFQ** RFQ**
50mm M24x2.0 60° 145588 144388 RFQ** RFQ**
63mm M33x3.0 60° 145589 145633 RFQ** 138537
71mm M33x3.0 60° 145590 RFQ** RFQ** RFQ**
80mm TR42x4.0 60° 147863 147862 147864 RFQ**
90mm TR55x3.0 60° 145635 145634 145636 RFQ**
Toshiba
18mm M8x1.0 60° 145410 137468 145411 RFQ**
25mm M12x1.5 30° 150366 150367 RFQ** RFQ**
25mm M12x1.5 60° 145584 145578 RFQ** RFQ**
25mm M12x1.5 60° 150368 150369 RFQ** RFQ**
28mm M15x1.5 30° 160068 160070 160069 RFQ**
28mm M15x1.5 60° 160065 106667 106666 RFQ**
32mm M18x2.0 25° 160011 132374 RFQ** 114380
36mm M22x2.0 60° 144114 145686 RFQ** 103580
40mm M22x2.0 23° 144215 RFQ** RFQ** RFQ**
40mm M22x2.0 23° RFQ** 144214 RFQ** RFQ**
40mm M22x2.0 60° 144213 144212 RFQ** RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
632 B13-2-006/13 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Toshiba
45mm M26x1.5 30° 148514 123390 RFQ** RFQ**
50mm M28x2.0 30° 123545 145545 RFQ** 103721
55mm M28x2.0 30° 124275 134132 144218 126602
60mm M28x2.0 60° 137779 160108 RFQ** 121402
70mm M36x3.0 23° 147819 160107 RFQ** 137826
70mm M36x3.0 60° 160106 143327 RFQ** RFQ**
80mm M42x3.0 23° 150431 150432 150429 RFQ**
80mm M42x3.0 60° 145672 129178 145542 RFQ**
Toyo
24mm (G2) M12x1.5 30° 160104 150332 RFQ** RFQ**
24mm (SI) M12x1.5 45° 160105 150331 RFQ** RFQ**
28mm (G2) M16x2.0 LH 30° 160095 160096 RFQ** RFQ**
28mm (SI) M16x2.0 LH 45° 160097 160098 RFQ** RFQ**
32mm (G2) M18x2.5 LH 30° 147844 147843 147845 RFQ**
32mm (SI) M18x2.5 LH 45° 160100 160102 RFQ** RFQ**
40mm M22x2.5 LH 30° 144154 138527 RFQ** 123259
46mm M24x3.0 LH 30° 147880 138011 119635 RFQ**
50mm M27x3.0 LH 30° 134113 147134 RFQ** RFQ**
55mm M27x3.0 LH 30° 138881 147155 RFQ** 122096
60mm M30x3.0 LH 30° 148614 137451 RFQ** RFQ**
68mm M33x3.5 LH 30° 137061 160103 RFQ** RFQ**
83mm M39x4.0 LH 30° 160099 160101 RFQ** RFQ**
Trubor
25mm 1/2"-13 30° RFQ** RFQ** RFQ** 114664
31mm (Vandorn) 5/8"-11 30° RFQ** 126583 RFQ** 116710
35mm 5/8"-11 30° 134350 RFQ** RFQ** 121984
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote continued on next page
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-006/14 633
Free Flow Screw Tip Assemblies
BRODY-ring® OPTIONAL — See Pages 641-642
Trueblood
1" 1/2"-13 60° 150687 RFQ** RFQ** 115125
1-1/2" 5/8"-11 100° RFQ** RFQ** RFQ** 110965
1-1/4" 5/8"-11 90° 149113 RFQ** RFQ** RFQ**
1-3/4" 3/4"-10 RFQ** RFQ** RFQ** 112407
1-3/8" 5/8"-11 90° RFQ** RFQ** 151060 110684
2" 7/8"-9 90° RFQ** RFQ** RFQ** 118058
UBE
B2: Screws & Barrels
Van Dorn
30mm 5/8"-11 30° 150371 134585 RFQ** 103711
35mm 3/4"-10 30° 143621 131965 RFQ** 103733
38mm 3/4"-10 30° 158257 145599 RFQ** 123547
40mm 3/4"-10 30° 132941 140287 133348 103666
41mm 3/4"-10 30° 136423 RFQ** RFQ** RFQ**
50mm 1"-8 30° 144104 132159 158451 103607
57mm 1-1/4"-7 30° 138259 137853 144096 103570
65mm 1-3/8"-6 30° 136680 131611 135475 103751
69mm 1-3/8"-6 30° 160851 160852 RFQ** 103652
75mm 1-3/8"-6 30° 150377 150378 150376 119085
80mm 1-3/8"-6 30° 135729 145622 145621 112465
90mm 1-3/4"-8 30° 143620 145455 145454 103673
105mm 1-3/4"-8 30° 147899 134152 RFQ** 103629
115mm 2"-8 45° 144867 160123 RFQ** 103590
135mm 2-1/2"-8 40° 150379 150380 RFQ** RFQ**
*Narrow Sliding Ring **Request for Quote Any Tip Available — Call for Quote
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
634 B13-2-006/15 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Introducing Custom Screw Tip
Design by R. Dray MFG
Made in the U.S.A
Since 1973, R. Dray Manufacturing has been known in the industry for
3 Key Components:
1. Experience - within the plastics industry, R. Dray Manufacturing has worked
with companies over an endless array of manufacturing issues and is the only
company that truly can stand behind a 100% guarantee on all of their
product designs
2. Service - the plastics industry has
come accustom to R. Dray’s
reputation for quality, industry
assistance and integrity
3. Consistent Quality - each
manufactured component is
rigorously tested to conform to
the closest tolerances in the
plastics industry prior to shipment
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-007 635
All Purpose Valve (APV) by R. Dray MFG
Solves all your valve related problems Made in the U.S.A
distance to close
- Self cleaning (no dead spots) U.S. Patent No. 6203311
# Decreases total operating cost
- Low starting injection velocities,
even with low viscosity polymers # Less restrictive than any other seat
- Reduces barrel wear type closing valve on the market
- Eliminates seat wear - Allows for faster recovery
- Minimizes scrap - Lower process temperatures
minimizing wear
— HOW IT WORKS — - Increased clearance between ring
O.D. and barrel I.D. for closure,
0.010 Land
minimizing wear
Direction of Injection
# 4140 Steel
Resin
Barrel 0.030 Clearance
APV Seat
The All Purpose Valve seals as a ring slides over
a circumferential groove, continues to seal as the
ring moves upstream over a rear land, and
achieves a final seal as the ring encounters the
Screw rear retainer. Positive closure while withstanding
pack and hold pressures of 20,000 psi without
creeping into the cushion.
APV Sliding Ring
APV Body
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
636 B13-2-008 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
All Purpose MIXING Valve by R. Dray MFG
Best mixing valve on the market Made in the U.S.A
All the same great features and molding advantages of the APV Plus...
# Barrier flight design - provides greater degree of dispersive mixing due to
the added amount of shear
# Distributive mixing
is also
incorporated
with the entry and
exit channels
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-009 637
All Purpose MIXING & INTERLOCKING Valve by R. Dray MFG
For long term operation where mixing is required
All the features and molding advantages of the APV Mixing
and Interlocking Valve in ONE
# Decreases downtime with interlocking design
# Improves part quality by
providing the best
color mixing
of any valve
on the
market
B2: Screws & Barrels
# Decades
of tests and
customer applications
proves this is the last valve you’ll ever buy
Made in the U.S.A
638 B13-2-010 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
(Please give diameters and lengths of sliding ring valves in decimals only)
Specify:
1. Press Make __________________________________ 3. Operating Temperature _________________________
Model _______________________________________ 4. Inside Diameter of Barrel in Ring Travel Zone:
Serial Number ________________________________ NEW ________________________________________
and Year _____________________________________ USED _______________________________________
2. Material to be Molded __________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ____________________ Fax: ( _______ ) ___________________
Address: ___________________________________________________________________________________________________
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-011 639
Need a
IMS supplies screw tips for all
makes and models of
molding machines.
• ARBURG
• AUTOJECTOR
• BATTENFELD
• BOY
• BUCHER
Replacement
• CINCINNATI
• CINCINNATI SENTRY
• CINCINNATI VISTA
• DEMAG
Screw Tip
• EGAN
• ENGEL
• FARREL
• FERROMATIC
FAST?
B2: Screws & Barrels
Call IMS
• GOLDSTAR
• HAITIAN
• HPM
• HUNTER
• HUSKY
• IMPCO
• JSW
• KAWAGUCHI
• KLOCKNER
• KRAUS-MAFFEI Many Ready to Ship
• LOMBARD
• MITSUBISHI SAME DAY!
• NATCO
• NEGRI-BOSSI
• NETSTAL Our shop works with:
• NEW BRITAIN
• NEWBURY • H-13 • 920 Stainless
• NIIGATA • D-2 • CPM-M4
• NISSEI • S-7 • CPM10V
• PYRAMID
• REED
• CPM9V
• SANDRETTO
• SHINWA SEIKI
• STOKES
We understand DOWNTIME KILLS
• SUMITOMO the BOTTOM LINE, so...
• TOOLEX
• TOSHIBA “Our tech’s #1 priority is
• TOYO
• TRUBOR
to get you up and running”
• TRUEBLOOD
• VAN DORN
• WABASH
Questions? Call
... and MORE! 866-467-9001
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
640 B13-2-012 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
M
IMS Screw Tip BRODY-ring®
Te c s
POSTPONE Barrel Repairs ---- IMPROVE Press Performance
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-013 641
IMS BRODY-Ring® Seals
TM Improve machine performance — Extend barrel life Made in the U.S.A
3 Bar Quality
BRODY-ring® Pricing Guide (Screw Tips NOT Included): Specify actual screw tip O.D. and machine make
METRIC STANDARD
Nominal Screw Tip O.D. Item # Unit Price Nominal Screw Tip O.D. Item # Unit Price
(Up to and including) (Up to and including)
15mm 136177 $ 51.30 1" 101571 $ 51.30
18mm 117933 51.30 1-1/4" 101606 52.40
20mm 164569 51.30 1-5/16" 101600 52.40
22mm 124150 52.40 1-3/8" 101594 52.40
24mm 124151 52.40 1-1/2" 101588 52.40
25mm 101603 52.40 1-5/8" 101582 57.90
26mm 110655 53.50 1-3/4" 101577 57.90
28mm 107972 60.34 2" 101567 57.90
30mm 101590 53.50 2.1" 101598 60.05
31mm 105612 53.50 2-1/8" 101592 60.05
B2: Screws & Barrels
642 B13-2-014-021315 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Instructions for IMS BRODY-ring®
4.) Use groove cutting tool. 3.) If any questions, phone an IMS Customer Service
Representative.
5.) If groove is cut into a case-hardened surface, screw tip
or check ring should be heat treated through to 46-48 4.) Wall thickness under groove must be equal to groove
Rockwell C prior to installation of BRODY-ring®. depth for adequate check ring strength.
Center Center
groove .015 .015 groove
on Radius Radius on
screw tip sliding ring
.250 +.005/-.000
(for under 1.499 dia.)
.380 +.005/-.000
(for 1.5 dia. & larger)
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-015 643
TM
Made of A4047
B2: Screws & Barrels
tool steel
Pin grip
4 Bar Quality
Installing Feed Screws
The Superior Screw Handling Device!
• High Strength Aluminum welded Aluminum – Long Lasting, Durable
• Light weight – Won’t dramatically increase weight of already cumbersome screw
• Includes comfortable rubber hand grips –
provides user comfort while transporting screws
• Adjustable Screw Positioning Pins with Aluminum
Handles – No tools required to adjust tool. Quick
adjustments = less time wasted
• Brass Screw Positioning Pins – wont scratch new
screws, easy to replace if damaged or worn. Item #164751
• Fits most screws for most presses. Adjustable from
1-9/16” to 3-1/2” Diameter Screws. $175 ea
#165153 (set of two)
644 B13-2-016-092115 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Fluted Screw Tip Wrench
Made in the U.S.A
Fully Adjustable — 3, 4 or 5 Flute TM
3 Bar Quality
The IMS Fluted Screw Tip Wrench is the ideal tool for removing
fluted screw tips. It avoids costly damage caused by other ONLY FROM IMS
removal methods. The wrench is compatible with hundreds
of screw tip sizes. It adjusts up to a 3" screw tip body diameter.
The most versatile
And you can use it for screw tips with 3, 4 and 5 flutes.
• Specifically designed for removing fluted screw tips
screw tip wrench
• Avoids damage to fluted screw tips on the market!
• Requires virtually no adjustment
• Safer than makeshift removal methods
• Facilitates machine setup and
maintenance
5 Flute Assembly
r. Techie’
M
s
Hand tighten screw tips. Use a wrench, only if needed, to remove the tips.
Always use anti-seize on the threads when installing.
Te c h i p s
T
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-017 645
IMS Screw Repair Service
All repairs are by experienced machinists using YES...
state-of-the-art equipment. Even damaged screws like this
Contact the IMS Engineering at ems@imscompany.com for can be salvaged
a Return Authorization (RA) number before shipping screws
to IMS Company for repair. Ship your worn or damaged Before After
screws as Class 85 Machine Parts to:
IMS Company
10373 Stafford Road
Chagrin Falls, Ohio 44023
You will receive an inspection report covering repair cost
and delivery dates. If you authorize a screw repair, we
won't charge for inspection. If you should decide not to
B2: Screws & Barrels
If your screw is beyond feasible repair, remember that IMS stocks popular
models of new OEM-design reciprocating screw. If it is not in stock, you will
be quoted a price and delivery of a replacement screw. Typical STOCK models
include: Arburg - Cincinnati - JSW - Kawaguchi - Nissei - Toshiba - Van Dorn.
IMS can also quickly design, manufacture and ship custom screws.
USE THE REQUEST FOR QUOTATION FORM ON PAGES 659-661.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
646 B13-2-018 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS OEM Replacement Screws
Stocked in many popular sizes 3 Bar Quality
TM
OEM Replacement Screws promote smooth material flow Purchasers also order:
without material degradation. Screws with chrome-plated and
• Purgex, page 677
nitrided surface treatments are also available. Contact the IMS
Components Team at components@imscompany.com for
more information.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-019 647
TM
IMS Exclusive
3 Bar Quality
Screws
Help you produce
stain-free, more dimensionally stable parts!
UNIQUE PROVEN DESIGN Promotes:
# Better Heat Control
B2: Screws & Barrels
— INQUIRE TODAY —
for Price and Delivery
FLITE-LESS® is a trademark of IMS Company
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
648 B13-2-020 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Thermally-Compensated TM
Outside,
you cannot tell the
IMS Thermally-Compensated Screw
from any other.
BUT INSIDE, PUTS BACK
IT’S QUITE DIFFERENT! EXCESS
FRONT
WHERE
IT
END REALLY
HEAT... COUNTS!
There, the internally modified screw returns the unneeded front-zone heat
to a point where it can be reused to finish melting incoming pellets that
otherwise get through on regular screws.
At the same time, the new screw allows you to reduce front end-heat with
a direct effect on cycle, part quality and reject rate.
This service is available from IMS for injection machine screws. Most existing
screws can be drilled out for this modification. For those that cannot, you
might consider letting IMS supply you a Thermally-Compensated Screw,
instead of putting good money into a screw repair — money which would
go a long way toward buying a new IMS thermally-compensated one instead.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-021 649
r. Techie’
M
Screw Material Guidelines
s
Te c
h T i ps BASE SCREW MATERIALS ACCEPTABILITY FOR RESIN WEAR CONDITIONS
ABRASIVE CORROSIVE (7)
Material Designation Treatment (1) RC (2) FH (3) Normal (4) Moderate(5) Severe (6) Moderate Severe
ALLOY STEELS:
4140 Flame -hardened 48-55 no Acceptable Poor N/A N/A N/A
4140 Chrome-plated 60-65 yes Good Acceptable N/A Good N/A
Nitralloy 135-M Nitrided 63-70 yes Good Acceptable N/A Poor N/A
TOOL STEELS:
CPM 9V Heat-treated 54-56 no Excellent Excellent Good Acceptable N/A
CPMM4 Heat-treated 62-64 no Excellent Good Acceptable Poor N/A
CPM 420 Heat-treated 54-56 no Acceptable Poor N/A Good Poor
SPECIAL ALLOYS:
Monel K-500 Age hardened 37-39 opt’l Acceptable N/A N/A Excellent Good
B2: Screws & Barrels
Nickel 718 Age hardened 43-45 opt’l Acceptable N/A N/A Excellent Good
Encapsulations Carbide coatings 70+ no Excellent Excellent Good Good Poor
CPM - Crucible Materials Corporation N/A - Not Acceptable
(1) Includes chrome-plating to .003"-.005" and gas or ion nitriding for 24+ hour cycle.
(2) Rockwell C hardness.
(3) Flight hardsurfacing required.
(4) Thermoplastics with no reinforcements.
(5) Thermoplastics with up to 30% reinforcement.
(6) Thermoplastics with more than 30% reinforcement.
(7) Moderate includes cellulosics, acetals and others containing corrosive additives.
MATERIAL OPTIONS
Feed screws are manufactured from conventional tool steels such as 4140, D-2 or H-13. Particle Metallurgy processing such
as CPM9V, S90V, CPMM4 is also used.
Nitralloy 135M
Excellent low-cost, prehardened steel machined and Nitrided for 72 hours. For wear-resistant or general purpose materials.
Low-cost alternative when excessive wear is not a primary consideration
D-2 Tool Steel
A high carbon/high chrome (12%) tool steel with good wear resistance, but low on torque strength.
H-13 Tool Steel
A good high strength pre-hardened tool steel which is machined, thru-hardened, and ground dimensionally,
then nitride hardened for 72 hours for better wear resistance. H-13 is tough and can handle pressure and torque.
CPM9V Tool Steel
Highly wear resistant tool steel with a high percentage of vanadium carbide developed for high wear (abrasive)
applications. It resists wear from abrasive fillers in resin.
CPM10V Tool Steel
Excellent wear-resistant tool steel. Contains 10% vanadium. Ideal for highly abrasive plastics.
CPM420V Tool Steel
Stainless tool steel best suited for corrosion resistant applications.
CPMM4 Tool Steel
Crucible's CPM®-M4 is a high vanadium, special purpose, high speed steel exhibiting better wear resistance and toughness
than D2 or CPM®-9V. CPM®-M4 has a hardness rating of 64.0.
M-4
M4 has higher resistance to heat than 9V The heat tolerance for CPM 9V is only 800 and the heat tolerance for M4 is 1200F
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
650 B13-2-022/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
M HARD FACING ON SCREW FLIGHTS
s
4140
A tool steel with good strength when surface treated or hard faced.
Te c
h T i ps
STELLITE # 6
4140 based. Recommended for resins with a low percentage of filled materials. 37-42 RC hardness.
STELLITE # 12
Save as above with 40-47 RC hardness.
COLMONOY 56
Nickel based. More wear resistant than Stellite. Recommended for glass-filled or resins. 50 to 55 RC hardness
More wear resistant than Stellite Recommended for glass-filled resins. 50-55RC
NITRIDING
Increases the hardness and life of tool steel screws such as 135M and 4140. Very cost effective.
A 4140 alloy steel screw can be nitrided satisfactorily, however, a nitriding steel (such as Nitralloy 135M) has aluminum added to give a
better response in nitriding hardness, both as to consistency and depth.
Gas Nitriding is used to create a surface hardness on the screw. The hard layer of steel will vary in depth from .007" to .015" depending
upon the length of the nitriding cycle. The hard layer (usually well above 60 RC) is achieved by heating the steel in an atmosphere of nitrogen
CHROME PLATING
Offers hardness and low friction with corrosion protection. Double and triple chrome plating often used for corrosive applications.
Although most processors are familiar with chrome-plating, there is an important specification to be considered in purchasing a
chrome-plated screw or having a repaired screw chrome-plated. The critical specification is the depth of the plating.
Most of the screws that are not manufactured from solid tool steels or special alloys have a flight hard-surfacing material welded to form
the outside diameter of the screw flights.
The hard-surfacing materials are predominantly cobalt-based or nickel-based. The most common cobalt-based materials include
the Stellites (6 and 12) which exhibit uniform wear and are satisfactory in non-corrosive environments.
CARBIDE COATING
Carbide coating - Guaranteed to double the life of a CPM9V screw.
NICKEL ALLOYS
Processing fluoropolymers must be done with nickel alloy screws or screws that are totally encapsulated with a relatively iron-free material.
Monel K-500 and Inconel 718 are both nickel alloys that can be hardened into the low 40's RC. Both resist corrosion quite well and, although
very expensive, provide an acceptable solution to the extreme corrosiveness of PVC.
TOTAL ENCAPSULATION
There are several methods used to totally encapsulate a screw with wear and/or corrosion resistant material. The methods include
detonation guns, HVOF systems and various spray weld processes. A wide selection of materials can be used ranging from the types
of materials used for flight hard-surfacing to customized products containing very hard wear resistant carbides.
NOTE: Screw and Barrel wear over time, will reduce screw recovery, increase scrap rates and increase energy consumption. While molders
may recognize the costs of wear, they usually accept it as a necessary part of their business. Using a nozzle tip blank such as
IMS's 136499 or 136486, try to inject slowly forward at reduced pressure to quantify the ability of the press to hold cushion.
You can quickly spot a problem before it becomes serious.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-022/2 651
Feed Screws
IMS Item Nos. (Materials)
Make of Press 4140 4140
Screw OD OAL w/ Colmonoy #56 Nitralloy 135M CPM9V D-2 w/ Stellite #12
Cincinnati Material
1" 30-1/4" RFQ* 122108 RFQ* RFQ* RFQ*
2" 43" 124866 RFQ* RFQ* RFQ* RFQ*
2-3/4" RFQ* RFQ* RFQ* RFQ* 137142
*RFQ=Request for Quote continued on next page
Cincinnati Material
16mm 20-5/16" RFQ* 120492 RFQ* RFQ* RFQ*
18mm 27-1/8" RFQ* 120494 RFQ* RFQ* RFQ*
28mm 33.687" RFQ* RFQ* 122046 RFQ* RFQ*
32mm 37.32" RFQ* RFQ* 133550 RFQ* RFQ*
40mm 43.063" RFQ* 122514 137555 RFQ* RFQ*
45mm 52.63" 142411 RFQ* RFQ* RFQ* RFQ*
50mm 52.68" RFQ* 144170 RFQ* RFQ* RFQ*
50mm 59.13" RFQ* RFQ* RFQ* RFQ* 144171
65mm 66.375" 132653 128372 RFQ* RFQ* RFQ*
Demag Material
22mm 30-1/4" RFQ* RFQ* 129896 RFQ* RFQ*
35mm RFQ* RFQ* 125640 RFQ* 125641
60mm 65.91" 145508 145507 145509 RFQ* RFQ*
70mm 78.3" 144409 RFQ* RFQ* RFQ* RFQ*
Egan Material
4-1/2" 112.5" 125026 RFQ* RFQ* RFQ* RFQ*
18mm 24.4" RFQ* RFQ* 142282 RFQ* 144142
25mm 27.56" RFQ* RFQ* 120658 RFQ* RFQ*
25mm 34" RFQ* RFQ* RFQ* 120883 RFQ*
30mm 31.81" RFQ* 118821 RFQ* 132170 RFQ*
30mm 36.61" RFQ* RFQ* 122315 RFQ* RFQ*
30mm 23.8" RFQ* RFQ* RFQ* RFQ* 119247
30mm 24.3" RFQ* RFQ* RFQ* RFQ* 121891
45mm 44.5" RFQ* RFQ* RFQ* 123018 RFQ*
Fu Chen Material
42mm 37.45" RFQ* RFQ* 132355 RFQ* RFQ*
Gluco Material
1-1/4" RFQ* 125631 RFQ* RFQ* RFQ*
Goldstar Material
85mm 107.8" 144194 RFQ* RFQ* RFQ* RFQ*
*RFQ=Request for Quote continued on next page
HPM Material
1" 132275 RFQ* RFQ* RFQ* RFQ*
1-1/2" RFQ* 134877 RFQ* RFQ* RFQ*
2" 65.25" RFQ* 125349 RFQ* RFQ* RFQ*
Husky Material
70mm 74.41" 145618 145617 RFQ* RFQ* RFQ*
Impco Material
2-1/2" 77.25" 132799 RFQ* RFQ* RFQ* RFQ*
B2: Screws & Barrels
Jaco Material
1-1/4" 29.0" RFQ* RFQ* 136349 RFQ* RFQ*
JSW Material
28mm 29" RFQ* 130672 RFQ* RFQ* RFQ*
35mm 37-1/2" RFQ* 130671 RFQ* RFQ* RFQ*
40mm 42.625" RFQ* RFQ* 138218 RFQ* RFQ*
46mm 54.21" RFQ* 144187 RFQ* RFQ* 144188
46mm 47.4" RFQ* 144189 RFQ* RFQ* 144190
Kawaguchi Material
30mm 31.01" RFQ* 144225 RFQ* RFQ* 144226
36mm 36.6" RFQ* 129622 RFQ* RFQ* RFQ*
50mm 53.312" RFQ* 127304 RFQ* RFQ* RFQ*
Killion Material
1-1/4" 35.62" RFQ* 142346 RFQ* RFQ* RFQ*
Lester Material
2" 51-1/4" RFQ* 130892 RFQ* RFQ* RFQ*
2-1/2" 65" RFQ* 129060 RFQ* RFQ* RFQ*
Lombard Material
1-1/2" 44" RFQ* 118531 RFQ* RFQ* RFQ*
Meiki Material
40mm RFQ* 124727 RFQ* RFQ* RFQ*
Mitsubishi Material
55mm 57.62" RFQ* 121712 RFQ* RFQ* RFQ*
Multiplas Material
76mm RFQ* 137334 RFQ* RFQ* RFQ*
*RFQ=Request for Quote continued on next page
Call 866-467-9001 for a Product Specialist
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
654 B13-2-023/3 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Feed Screws
IMS Item Nos. (Materials)
Make of Press 4140 4140
Screw OD OAL w/ Colmonoy #56 Nitralloy 135M CPM9V D-2 w/ Stellite #12
Natco Material
1" 18.50" 107967 RFQ* RFQ* RFQ* RFQ*
70mm 64.44" RFQ* RFQ* RFQ* 118834 RFQ*
NBY Material
1" 18.5" RFQ* RFQ* 107967 RFQ* RFQ*
Nestal Material
Newbury Material
1" 18.5" RFQ* 124350 126826 RFQ* RFQ*
1" 24.31" RFQ* 138202 132438 RFQ* RFQ*
1" RFQ* 142117 RFQ* RFQ* RFQ*
1-1/2" 28.625" 138289 RFQ* RFQ* RFQ* 131955
1-1/4" 22.81" RFQ* 119437 132510 RFQ* 137413
1-3/4" 42.47" RFQ* RFQ* 120221 RFQ* RFQ*
1-3/4" RFQ* RFQ* 137027 RFQ* RFQ*
1-3/8" 27.32" RFQ* RFQ* 143042 RFQ* RFQ*
1-3/8" 33.43" RFQ* RFQ* 119759 RFQ* RFQ*
1-3/8" 33.5" RFQ* RFQ* 136404 144702 RFQ*
2" 31.75" RFQ* RFQ* 145645 RFQ* RFQ*
2" 52.5" RFQ* RFQ* 145646 RFQ* RFQ*
2-1/4" 41.75" RFQ* RFQ* 145647 RFQ* RFQ*
Niigata Material
18mm 28.62" RFQ* RFQ* 145465 145464 RFQ*
35mm 32.25" RFQ* 133621 RFQ* RFQ* RFQ*
35mm 25.75" RFQ* RFQ* RFQ* 136676 RFQ*
*RFQ=Request for Quote continued on next page
Nissei Material
16mm 18.75" RFQ* RFQ* 132231 RFQ* RFQ*
19mm 18.6" 145467 145466 145468 RFQ* RFQ*
22mm 18.41" RFQ* RFQ* RFQ* 132369 RFQ*
22mm 22.44" RFQ* RFQ* RFQ* 145648 RFQ*
26mm 24.32" RFQ* 145649 RFQ* RFQ* RFQ*
26mm 26.4" RFQ* 145650 RFQ* RFQ* RFQ*
28mm 31.3" RFQ* RFQ* 126906 RFQ* RFQ*
30mm 24.39" 145470 145469 145471 RFQ* RFQ*
32mm 31.1" RFQ* 145651 RFQ* RFQ* RFQ*
B2: Screws & Barrels
Reed Material
1" RFQ* 125584 RFQ* RFQ* RFQ*
2" 44.25" RFQ* 119531 RFQ* RFQ* RFQ*
2" 29.5" RFQ* 142228 RFQ* 131367 RFQ*
2-3/4" 48.312" RFQ* 129530 RFQ* RFQ* RFQ*
Sandretto Material
45mm 46.875" RFQ* 124149 RFQ* RFQ* RFQ*
50mm 75.5" RFQ* 144191 RFQ* RFQ* RFQ*
55mm 68.375" RFQ* 138813 RFQ* RFQ* RFQ*
Sumitomo Material
25mm 28.14" 145491 145490 145492 RFQ* RFQ*
32mm 38.56" 145501 131879 145502 RFQ* RFQ*
56mm 65.04" 145504 145503 145505 RFQ* RFQ*
Toshiba Material
Toyo Material
40mm 40.46" RFQ* RFQ* 121970 RFQ* RFQ*
68mm 68.375" 124197 RFQ* RFQ* RFQ* RFQ*
Trubor Material
31mm RFQ* RFQ* 122058 RFQ* RFQ*
UBE Material
30mm 24.48" RFQ* 132663 RFQ* RFQ* RFQ*
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
658 B13-2-024 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
— Page 1 of 2 —
See next page to compete Injection Screw Form.
See page 661 to complete Extrusion Screw Form.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-025/1 659
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
MAX. Screw Stroke: ____________ in / mm Drive: J Electric J Hydraulic Shot Size: __________ oz. / grams Existing Recovery Time: _________ SEC
MAX. Screw RPM / KPM: ________ in / mm MAX Torque: _______ FT. LB. NM Existing RPM: _______________ Backpressure: _________________ PSI
B2: Screws & Barrels
MFI: _______________ Filler _______________% Additives: _____________ What Products are Molded: _______________________________________
J Color J Master Batch J Powder J Liquid 7. State Any Other Information That May Help to Recognize
and Understand the Situation:
3. Existing Problems:
J Recovery J Quality J Corrosion J Temperature ________________________________________________
J Wear Of J Screw Flights J Screw Root J Screw Tip
________________________________________________
Please be specific: ________________________________________________
________________________________________________
______________________________________________________________
________________________________________________
______________________________________________________________
________________________________________________
4. Expectation:
Recovery: _______________________________ OZs per SEC / Grams per SEC ________________________________________________
Date: ____________ Quantity: _______ Phone: ( _______ )________________________ Fax: ( _______ ) _______________________
Address: ____________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
660 B13-2-025/2 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
MAX. HP: ________ MAX. RPM: ________ Typical Operating RPM: _______ 5. Existing Equipment Information:
MAX. AMPS: ________________ Typical Operating AMPS: _______________ Mixing Device: J Yes J No J (Located) Transition J Metering
PSI @ Discharge End: __________________ J Slotted Rings J Blister Ring J Long Barrier J Straight Pins J Other
Compression Ratio: _____ :1 Screw Meter Depth: _______ No. of Stages: _____
2. Resin Information:
Type: ______________ Grade: __________ Manufacturer: _______________ Vented Barrel: J Yes J No What Gasses: ________ Vent Vacuum: J Yes J No
Melt Index: _________ Melt Flow Rate: __________ % Regrind: ___________ Injection Ports Used: J Yes J No What is Injected: ___________________
Bulk Density: _________ Melt Density: __________ J Pellets OR J Powder Grooved Feed Machine: J Yes J No Number of Grooves: ______________
J Yes J No Additive / Filler Types: ________________________________ Existing Rate: _______ LBS/HR @ ______ RPM Existing Melt Temp: _________
3. Existing Problems: Temp Measured by: ___________ No. of Barrel Zones: ________________
J Rate J Quality J Temperature J Surging
Machine Temp Settings from Feed: __________________________________
Type Wear (Flight, Root): ___________________________________________
Products Extruded: ______________________________________________
______________________________________________________________
7. State Any Other Information That May Help to Recognize
______________________________________________________________ and Understand the Situation:
______________________________________________________________ ________________________________________________
________________________________________________
Date: ____________ Quantity: _______ Phone: ( _______ )________________________ Fax: ( _______ ) _______________________
Address: ____________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-025/3 661
r. Techie’
M
PROCESS TROUBLE-SHOOTING GUIDELINES
s
Te c CRYSTALLINE MATERIALS AMORPHOUS MATERIALS
h Ti p s Problem Lower/Reduce Raise/Increase Lower/Reduce Raise/Increase
SPLAY Injection Pressure Melt Temp Melt Temp Mold Temp
Holding Pressure Time Mold Temp Moisture Content Gate Size
Injection Speed Gate Size Injection Pressure
Mold Release Spray Screw Speed
Hold Pressure Time
Venting
FLASH Melt Temp Clamp Pressure Melt Temp Clamp Pressure
Mold Temp Mold Temp
Injection Pressure Injection Pressure
Hold Pressure Time Injection Speed
Injection Speed
VOIDS Melt Temp Mold Temp Melt Temp Mold Temp
Moisture Content Gate Size Moisture Content Gate Size
Cooling Time Injection Pressure Cooling Time Injection Pressure
Back Pressure Injection Speed Back Pressure
Hold Pressure Time Hold Pressure Time
WARPAGE Melt Temp Cooling Time Melt Temp Hold Pressure Time
B2: Screws & Barrels
662 B13-2-026 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Barrel Repair Service
IMS Company refurbishes barrels and installs barrel
liners to your specifications. For liners, choose from D-2,
CPM-10V CRUCIBLE® or Bimetallic materials:
D-2 Steel
In the 1950's, IMS developed standard, wear resistant D-2
liners for longer barrel life. D-2 is hardened throughout to
combine hardness and toughness. When nitrided, it gives
outstanding performance, even on glass-filled plastics.
CPM-10V CRUCIBLE® Tool Steel
for heavily filled materials
CPM-10V is an abrasion-resistant steel from CRUCIBLE®
Specialty Metals Division. Produced by a patented process, it
incorporates high amounts of carbon, chromium, and vanadium
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-027 663
IMS OEM Replacement Barrels
YES — IMS was
FIRST to offer
Sleeved Barrels!
We have repaired
thousands of
barrels over
a 50+ year
period!
PROMPT
SERVICE
still counts!
B2: Screws & Barrels
1. D-2 Steel
In the 1950’s, IMS developed standard, wear resistant
D-2 liners for longer barrel life. D-2 is hardened
throughout to combine hardness and toughness.
When nitrided, it gives outstanding performance,
even on glass-filled plastics.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
664 B13-2-028 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
M
Essential Barrel Information
s
Te c
h T i ps TOOL STEEL-LINED BARRELS
Premature and uneven cylinder wear is expensive in terms of both replacement costs and lost
process efficiency. IMS barrels are lined with your needs in mind. For low abrasion applications, we keep your
costs down by using D-2 tool steel.
Nitrided Barrels
Nitrided barrels are lined with Nitralloy 135M. Gas nitriding is available on barrels.
CPM FAMILY
CPM tool steels are premier products of Crucible Specialty Metals Division. The process of producing CPM
tools involves gas atomization of pre-alloyed molten steel to form powder that is then isostatically compressed
into 100% dense compacts. CPM steels have no alloy segregation and exhibit extremely uniform carbide
distribution. The CPM process produces very homogeneous, high quality steel characterized by superior
dimensional stability, grindability, and toughness compared to steels produced by conventional processes.
CPM9V
With a lower carbon and vanadium to improve toughness and heat check resistance, CPM9V performs well in
problem applications where high carbon, high chromium tool steels, such as CPM10V or the high speed steels,
lack sufficient toughness or heat check resistance, or where lower alloy tool steels and hot work tool steels lack
sufficient wear resistance.
CPM10V
CPM10V has its vanadium content optimized to provide superior wear resistance while maintaining toughness
and fabrication characteristics comparable to D2 and M2. Its exceptional wear resistance and good toughness
make it an excellent candidate to replace carbide and other highly wear resistant materials in cold work tooling
applications, particularly where tool toughness is a problem or where cost effectiveness can be demonstrated.
Due to it's 10% vanadium content, this steel is one of the most abrasion resistant materials available.
CPM15V
CPM15V is intended for applications requiring exceptional wear resistance. It has more vanadium carbides in
its composite than CPM10V and provides more wear resistance and longer tool life. CPM15V also offers an
alternative to solid carbide where carbide fails by fracture or where intricate tool design makes carbide difficult
or risky to fabricate. Due to it's 15% vanadium content CPM15V will outwear CPM10V.
CPMS90V
A stainless steel with a high volume of vanadium carbides for exceptionally good wear resistance. Due to its
high vanadium content for wear resistance and it's sufficient chromium content, to provide good corrosion
resistance, the wear and corrosion resistance of S90V make it an excellent candidate where increased wear is
a primary concern. It can be heat treated to a lower hardness for use as a screw material or to a higher
hardness (RC 58-60) for barrel lining.
continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-029/1 665
r. Techie’
M NITRIDED BARRELS
s
Te c Nitrided barrels may be made from 4140 but a nitriding steel, such as Nitralloy 135M enables a
h T i ps better nitrided interior surface to be achieved. Two nitriding methods are available: gas nitriding and
ion nitriding.
Gas Nitriding
Gas Nitriding is used to create a surface hardness on the screw. The hard layer of steel will vary in depth from
.007" to .015" depending upon the length of the nitriding cycle. The hard layer (usually well above 60 Rc) is
achieved by heating the steel in an atmosphere of nitrogen (ammonia gas) at temperatures of 950 to 1050
degrees F. The nitrogen atoms are diffused into the surface of the steel, combining with nitride-forming
elements, such as chromium, aluminum, molybdenum, vanadium, tungsten and titanium, to produce a very
hard surface, particularly for the first .002" to .005" depth. Nitrided screws have a very good wear resistance
until the surface hardness is worn away. After the surface is worn .007", wear accelerates and the screw may
quickly be worn to a condition that is beyond repair.
B2: Screws & Barrels
Ion Nitriding
Ion nitriding is similar to gas nitriding, using an electrical potential to ionize low pressure nitrogen gas. The ions
produced are accelerated to the surface of the steel, heating it to a temperature for diffusion to take place (i.e.,
the uniting of the atomic nitrogen with the nitride-bearing elements in the steel). Because the temperatures are
lower and pressures more controllable, a more uniform surface hardness depth may be achieved. The
ionization occurs in a plasma discharge process which creates a glow, hence, this type of nitriding is also
referred to as the 'plasma method' or 'glow discharge' nitriding.
Nitrided barrels are not recommended for use with abrasive or corrosive resins because of their inability to
resist wear over an extended time period.
BIMETALLIC BARRELS
Cast bimetallic barrels are manufactured by metallurgically bonding the lining alloy to the inner surface of a pre-machined,
seamless steel tube, forging or bar stock. The bonding is achieved by heating the barrel (and the lining alloy) to the point
where the alloy is melted. The barrel is then spun and cooled, centrifugally casting the alloy on the inner surface of the
barrel. The casting is typically .040" - .080" in depth.
The linings range from standard abrasion-resistant, to corrosion-resistant, to premium. Each provides different degrees of
wear resistance.
IMS manufactures bimetallic barrels in-house using top of the line cast bimetallic barrel blanks. We carry in inventory most
common sizes of these barrel blanks in order to meet our customer's needs.
Standard Bimetallic
Standard wear-resistant liner. Nickel-Boron alloy with good abrasion resistance and low friction co-efficient.
Carbide Bimetallic
Super wear-resistant tungsten carbide liner. For highly abrasive applications. Some corrosion resistance.
Premium Bimetallic
Corrosion resistant liner. Cobalt-nickel based with high chromium content. Provides excellent wear resistance in highly
corrosive conditions.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
666 B13-2-029/2 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
M RELINED BARRELS
s
IMS offers full-length relining of barrels up to eight (8) inches in diameter and 180" inches in length, using
premium tool steels and special alloys, depending upon the customer's need.
Te c
h T i ps
Upon receipt of your barrel, our engineers will do a thorough inspection of your barrel. We will then contact
you with a quote for repair, either by phone or fax. At that time you will have the option of proceeding with the
work (upon IMS's receipt of your purchase order approval), having IMS return the barrel to you or having us dispose of it.
AN IMS ALTERNATIVE: R215 Carbide bound liner: We start with a solid piece of 4100 series tool steel with a bored ID.
CO56 powder is then placed in the 4100 series barrel, heated up and spun. This makes the CO56 melt and stick to the
inside of the barrel, similar to a sleeve. It is then bored to manufacturer specs and polished. This barrel can be later bored
out and resleeved w/carbide or tool steel if necessary.
Bonding is achieved by heating the barrel (and the lining alloy) to the point where the alloy is melted. The barrel is then
spun and cooled, centrifugally casting the alloy on the inner surface of the barrel.
The resulting lining is about 1/16” (.0625”) thick throughout the barrel. Due to the temperatures reached in the spin-casting
BIMETALLIC:
Standard Good Acceptable Poor Poor N/A
Corrosion Resistant Good Acceptable Poor Excellent Good
Premium Excellent Excellent Good Excellent Excellent
TOOL STEELS:
D-2 Good Acceptable Poor Acceptable N/A
CPM10V Excellent Excellent Good Acceptable N/A
CPM15V Excellent Excellent Excellent Acceptable N/A
CPMS90V Good Acceptable Poor Good Poor
SPECIAL ALLOYS:
Nickel 718 (Inconel or Pyromet) Acceptable N/A N/A Excellent Excellent
Monel K-500 Acceptable N/A N/A Excellent Excellent
Hastelloy C-276 Acceptable N/A N/A Excellent Excellent
C-2 Tungsten Carbide Excellent Excellent Excellent Excellent Good
CPM - Crucible Materials Corporation N/A - Not Acceptable
(1) All Thermoplastics without reinforcement or abrasive fillers.
(2) Thermoplastics with abrasive reinforcement or fillers up to 30%.
(3) Thermoplastics with 30% or more reinforcements or abrasive fillers and thermosets.
(4) Cellulosics, lonomers, Acetals and others containing corrosive additives.
(5) Fluoropolymers.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-029/3 667
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
Date: ____________ Quantity: _______ Phone: ( _______ ) _______________________ Fax: ( _______ ) _______________________
Address: ____________________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
668 B13-2-030 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Heavy Duty Lifting Slings TM
11" 136570
eyes
NOTE
136571 Prices below are for
Lifting Slings ONLY.
Meet all
Note: For larger molds, two slings are recommended OSHA Safety
(one for each half of mold.)
Standards
IMS also carries
Forged Steel Eye Bolts
--- SEE PAGE 844-845 ---
Lifting Slings
Item Number Size Unit Price
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-031 669
IMS Front End Cap Repair Service
OEM Front End Caps
Standard
IMS Company can get you any popular end cap or make
them to your exact specifications. Choose from such
Straight Taper
materials as H13, Nitralloy, 4140, CPM-10V Crucible® and
D-2, all of which offer excellent durability and wear-
resistance. Nonstocked items can often be manufactured
and shipped in one to three weeks, depending on your
requirements. Optional surface treatments such as
chrome plating, PVD coating and conventional nitriding
are also available.
SPIRAL™ Front End Caps
IMS Spiral-curve retrofit front end caps are helping more
and more molders get better molding performance and
fewer rejects from existing injection machines. Logarithmic
SPIRAL™ Curve
B2: Screws & Barrels
caps to IMS Company for repair. Ship your worn or damaged end caps as Class 85 Machine Parts to:
IMS Company
10373 Stafford Road
Chagrin Falls, Ohio 44023
You will receive an inspection report covering repair cost and delivery date information. If an end cap repair is authorized, there
is no charge for inspection. If you should decide not to repair or replace the end cap, you will be billed for out-of-pocket costs
incurred in handling and inspecting.
If your end cap is beyond feasible repair, remember that IMS stocks many popular models of new end caps. If it is not in
stock, you will be quoted a price and delivery of a replacement end cap.
IMS can also quickly design, manufacture and ship custom end caps.
USE THE REQUEST FOR QUOTATION FORM ON PAGE 673.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
670 B13-2-032 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS OEM Replacement Front End Caps
Prompt Delivery on Made-To-Order End Caps 3 Bar Quality
TM
• IMS can replace, and in some cases repair, any barrel end cap.
• Traditional end caps have evenly spaced bolt holes. Some press end caps have
non-concentric bolt patterns. Another common style in use consists of a
nozzle that threads directly into the barrel. IMS can replace all of these
styles, and more. Just provide information, or a sample, and IMS will
replace it, or repair it.
• IMS will inspect it, and quote what items can be fixed, and what they will
cost. If an end cap cannot be repaired, IMS will quote a new replacement.
• IMS can build end caps from any material: H13, Nitralloy, 4140 steel, D2.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-033 671
END CAP ASSEMBLY
INSTRUCTIONS
STEP 1: Lubricate bolt threads in area of
engagement. Also, lubricate face
of bolt using a nickel based
anti-seize compound (Item #130787
— see page 683).
STEP 2: Install all bolts finger tight.
STEP 3: Number bolts so that torquing
requirements can be met.
STEP 4: Apply torque in 20% (1/5) increments
of required torque, loading all bolts at
each increment before proceeding to
B2: Screws & Barrels
It is highly important to tighten all end cap and nozzle sealing surfaces properly. All mating
surface must come together evenly and squarely to ensure a proper seal.
Te c
h T i ps When thread on end caps are used and a torque wrench is not available, it is important to use
extreme care when tightening bolts. Over tightening can cause damage to the sealing surfaces.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
672 B13-2-034 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
NOTES: ______________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
Specify: __________________________________________________________
1. Press Make ______________________________________________ __________________________________________________________
Model ___________________________________________________ __________________________________________________________
Serial Number ____________________________________________ __________________________________________________________
and Year ________________________________________________ __________________________________________________________
Date: ____________ Quantity: _______ Phone: ( _______ ) ____________________ Fax: ( _______ ) ___________________
Address: ___________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-035 673
TM CUT CYCLE TIME - M
Exclusive SPIRAL™ End Caps, Screw Tips,
5 Bar Quality ®
Select
standardization. a direct and positive effect on cycle time, part quality and reject rate.
Prior to process controls, IMS had developed numerous individual The other component of the injection process, previously
products aimed specifically at improving part quality. Full Taper ignored, was the feed hopper. No matter what their diameter or
Nozzles and Screw Tip BRODY-rings® are just a couple of examples. height, they all had the same straight taper to the machine intake. At
Each addressed a specific need and they all were and remain solid, least that's the way it was prior to 1988. Consequently, they were all
successful products. It was the emergence of the process control,
however, that really started us thinking about the
injection process as a whole (both the machinery
and the material) and what could and should be
changed in order to mold better parts.
It was already a proven fact that the current,
restrictive R-Screw Process was stretching and
deforming the molecular bonds of our plastics and
seriously affecting finished part strength. We needed to find ways to Delivers
get the plastic from the hopper to the mold with the least amount of More Uniform Mold Better
damage possible. We found that this problem could be solved, in Parts with less
Flow Strains and
large part, by the replacement of all standard, flat internal tapers with
Flow Lines
674 B13-2-036/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
OLD BETTER PARTS 5 Bar Quality
TM
Feeds
Material
Smoothly
prone to bridging and surging. There wasn't a single OEM manner. 3. Pressure is provided by the lateral
feed hopper that could guarantee consistent, even feeding movement of the screw (as it should be) - NOT by
of the pellets to the screw. IMS, however, found that a the compressing of the material by the screw
logarithmic spiral curve in place of the straight taper flights, as is the case with all existing injection
produced astounding results. Tests showed that whether screws. Believe it or not, after nearly 30 years since
the material was virgin or regrind or whether the hopper was the introduction of the reciprocating screw, the IMS
full or nearly empty, ALL the material moved ALL the time in a SPIRAL™ R-SCREW was the FIRST and ONLY screw
steady downward flow. Hence was born the IMS SPIRAL™ developed expressly to reduce molded-in stress and
HOPPER. Their effect on part weight, part dimensions and overall strain. Research has revealed the injection machine doesn't
part consistency not to mention the flowability of most stubborn work as hard and produces more consistent quality parts.
materials is remarkable. IMS Exclusive SPIRAL™ Retrofit Components can improve the
Finally IMS Spiral Technology was applied to the screw -- more performance of ANY injection press regardless of age, make or model.
specifically, the screw flights. With IMS SPIRAL™ R-SCREWS: They can also SIGNIFICANTLY INCREASE YOUR BOTTOM LINE.
1. Pellets move forward in a more controlled, gentle tumble. 2. Pellets
begin melting sooner and proceed in a far more efficient and orderly Inquire TODAY for more information!
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-036/2 675
Purgex:™ Purging Compounds
®
Select
5 Bar Quality
Recommended for:
Hot Runners X X X X X X
Cold Runners X X X X X X
Mixing Nozzles X X X X X X
Extrusion Dies X X X X X
Check Valves X X X X X X
Melt Pumps X X X X X
676 B13-2-037-110415 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Purgex:™ Purging Compounds
®
Select
TM
5 Bar Quality
456+ General purpose purging compound for color and/or material changes plus efficient cleaning of hot
runner systems, Purgex™ 456 Plus has proven to be versatile and effective on a wide range of resins.
457+ Created for more challenging color and/or material changes plus efficient cleaning of hot runner
systems, Purgex™ 457 Plus has proven to perform particularly well in removing low- to mid-range
mineral and glass-filled resins.
458+ Designed for tough applications plus efficient cleaning of hot runner systems, Purgex™ 458 Plus has
proven to be particularly effective in removing resins with high pigment loading and/or high additive
content. As well, Purgex™ 458 Plus is versatile and is effective on a wide variety of resins.
602+ Specifically designed for clear resins, Purgex™ 602 Plus efficiently removes residual contamination
from the screw and barrel in injection molding machines and extruders and effectively cleans
hot runner systems. Purgex™ 602 Plus greatly reduces/eliminates the haze that is often left after
purging with polyolefin-based purging compounds.
The amount of Purgex required will be approximately 11/2 times your barrel capacity.
Other formulas available for special applications
Te c
h T i ps Purgex™ is a trademark of Neutrex, Inc.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-038-110415 677
Super-Scrub Max™
Acrylic Purging Compound
TM
5 Bar Quality
— CAUTION —
Before using Acrylic
Purging compounds:
B2: Screws & Barrels
# Softens but will not melt – great for screw pulls and shut-downs!
# Designed to purge hi-heat and high temperature engineering plastics and other difficult jobs.
# Produced from prime resin and is recommended for use in FDA approved food-contact items.
# Great for use where medical products are produced.
# Formulated for minimal odor and fumes – environmentally friendly!
Specifications
Recommended Uses Acrylics, Cellulosics, Polyolefins, ABS, Nylon, Polycarbonate, PET and
Styrenics and PVC Resins other high temperature Engineering Plastics
Temperature Range 350°-450° F (175°-230° C) 450°-525° F (230°-273° C)
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
678 B13-2-039-011215 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Purge Hopper
Simplifies the loading of purging compounds
TM
3 Bar Quality
# Lightweight 9.84"
# Portable
# Durable
# Easy to install
# Inexpensive
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-040 679
Heavy Duty Barrel Cleaning Brushes
TM
For easy, thorough cleaning of internal barrel surfaces Made in the U.S.A
3 Bar Quality
100981 1" 1
/4" 6.60 101117 3 /4"
1 1
/4" 7.75
100949 11/4" 1
/4" 6.60 101086 31/2" 1
/4" 7.75
101127 1 /2"1 1
/4" 6.60 101057 3 /4"
3 1
/4" 7.90
101094 13/4" 1
/4" 6.60 101028 4" 1
/4" 7.90
101063 2" 1
/4" 6.60 100996 4 /2"
1 1
/4" 9.10
101034 21/4" 1
/4" 6.60 100963 51/4" 1
/4" 10.65
101003 21/2" 1
/4" 6.60 101142 6" 1
/4" 12.00
100972 23/4" 1
/4" 7.20 112376 all 17 brushes above 126.10
Metric
119802 14 mm /16"-18
5
$7.90 100944 40 mm 1
/4" $ 7.90
140255 15 mm /16"-18
5
7.90 101031 45 mm 1
/4" 7.90
119796 16 mm /16"-18
5
7.90 101000 50 mm 1
/4" 7.90
101076 18 mm 1
/4" 7.90 100969 55 mm 1
/4" 7.90
140256 20 mm 1
/4" 7.90 100937 57 mm 1
/4" 7.90
101017 22 mm 1
/4" 7.90 101113 60 mm 1
/4" 7.90
100986 24 mm 1
/4" 7.90 101083 65 mm 1
/4" 7.90
100954 25 mm 1
/4" 8.25 101025 69 mm 1
/4" 8.10
101122 27 mm 1
/4" 8.25 100992 70 mm 1
/4" 8.25
101132 28 mm 1
/4" 8.25 100961 80 mm 1
/4" 9.10
101099 30 mm 1
/4" 8.25 101139 90 mm 1
/4" 9.10
101067 32 mm 1
/4" 8.25 101105 105 mm 1
/4" 11.35
101040 35 mm 1
/4" 8.25 101074 115 mm 1
/4" 11.35
101008 36 mm 1
/4" 8.25 101046 135 mm 1
/4" 12.95
100976 38 mm 1
/4" 8.25
Drill Extension Rods (for all except 119802, 140255, 119796)
101035 3' fiberglass $4.95 101004 3' twisted steel $5.45
36" 36"
For 119802, 140255, 119796
101128 Extension (5/16"-18 thread 24" length) $6.35 101064 T-handle only $2.45
101095 Extension (5/16"-18 thread 36" length) 7.00
3 Bar Quality
Copper Gauze
For safe cleaning of screw, barrel and mold
• REVERSIBLE --- medium grade mesh
on the outside --- turn gauze
inside out for heavier cleaning
coarse mesh
• Safe, soft copper will not mar surfaces
• Knitted mesh keeps flat wire on edge
for scraping
• Tough, interlocking loops will not pull apart
• Pure Copper - will not rust or contaminate
• Non-flammable - will not burn, smoke or spark
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-042 681
IMS High Heat — Copper Flake Thread Lube
TM Anti-seize compound
3 Bar Quality
r. Techie’
M
s
Copper Flake Thread Lube is the preferred compound for nozzle threads, but you can also
use High Heat Tape with PTFE — see page 247
Te c
h T i ps
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
682 B13-2-043-022216 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Heat Transfer and Anti-Seize Compounds
SAFEKOTE 60™ INFRA-KOTE
®
TM TM
These products consists of metal powders blended into a grease carrier to allow it to be applied. The grease carrier
will break down at the temperature listed, but the products will continue to provide heat transfer up to the listed
temperature limits of the metal powders.
Both excellent heat transfer compounds for use
with cartridge heaters and heater bands.
Good Up
to 600° F —
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-044 683
r. Techie’
M
Calculating Barrel Heat Loss
s
Te c
h T i ps Operating No Insulation 1" Insulation 1.5" Insulation
Temperature (°F) (Watts/Sq. Ft.) (Watts/Sq. Ft.) (Watts/Sq. Ft.)
300 180 18.6 12.4
325 210 20.9 14.0
350 243 23.4 15.6
375 275 26.0 17.3
400 313 29.0 19.0
425 350 31.5 21.0
450 387 34.3 22.9
475 425 37.2 24.8
B2: Screws & Barrels
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
684 B13-2-045 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
®
Select
UNIVEST®
Made in the U.S.A BARREL INSULATION SYSTEM 5 Bar Quality
TM
5 year
warranty
— BLANKET SPECIFICATIONS —
• Hot Face (Inside Fabric) • Straps - (Fabric with PTFE)
Silica Fabric (.042 Thick/1800° F Continuous) Made of the same material as the Cold Face
• Cold Face (Outside Fabric) - • Strap Enclosure
Green Fiberglass Cloth Impregnated with PTFE Cinch straps
(.016 Thick/550° F) • Buckles - Nickel Plated Steel Wire
• Insulation - Ceramic fiber With a loose roller for tightening ease
Non-Asbestos (1" Thick/2000° F)
continued on next page
UNIVEST® is a registered trademark of UniTherm Insulation Systems
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-046/1-032017 685
UNIVEST® BARREL INSULATION SYSTEM
ATTENTION BARREL BLANKET USERS:
IMS has completely overhauled our Barrel Blanket line.
Each standard IMS Barrel Blanket now covers a range of barrel circumferences and diameters. And each circumference now
comes in a series of standard mix ‘n’ match widths to cover your barrel.
Standard Circumferences ranges are 6” to 13”, 13” to 19”, 19” to 25”, 25” to 31”, 31” to 38”, 38” to 44”, 44” to 50”, 50” to
57”, and 57” to 63”.
Standard widths are 2, 4, 5, 6, 8, 10, 12, 14 and 16 inches. For odd-numbered widths, you can simply use a blanket that is 1”
wider than you need.
They easily compress in width. Or you can combine 5” width blankets with other available sizes.
These changes make your order simpler to place and IMS is more likely to ship same-day from stock. For blankets we don’t
have in the Ohio warehouse, the lead times are shorter than ever.
NOTE: Barrel blankets are also now Green instead of Blue, — Example of Typical Installation —
as a reminder of the energy savings these blankets offer.
B2: Screws & Barrels
Barrel Barrel
O.D. Circ. Width Item # Price O.D. Circ. Width Item # Price
2" - 4" 6" - 13" 2" 164924 $ 23.00 - 6" 13" - 19" 2" 164933 $ 30.00
4" 164925 38.00 4" 164934 50.00
5" 164926 46.00 5" 164935 60.00
6" 164927 53.00 6" 164936 70.00
2" - 4" 6" - 13" 8" 164928 69.00 4" - 6" 13" - 19" 8" 164937 89.00
10" 164929 84.00 10" 164938 109.00
12" 164930 99.00 12" 164939 129.00
14" 164931 115.00 14" 164940 149.00
16" 164932 130.00 16" 164941 169.00
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
686 B13-2-046/2-051916 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Barrel Barrel
O.D. Circ. Width Item # Price O.D. Circ. Width Item # Price
6" - 8" 19" - 25" 2" 164942 $ 37.00 14" - 16" 44" - 50" 2" 164978 $ 65.00
4" 164943 61.00 4" 164979 109.00
5" 164944 73.00 5" 164980 131.00
6" 164945 86.00 6" 164981 152.00
6" - 8" 19" - 25" 8" 164946 110.00 14" - 16" 44" - 50" 8" 164982 196.00
10" 164947 134.00 10" 164983 239.00
12" 164948 159.00 12" 164984 283.00
14" 164949 183.00 14" 164985 327.00
16" 164950 208.00 16" 164986 370.00
Barrel Barrel
O.D. Circ. Width Item # Price O.D. Circ. Width Item # Price
8" - 10" 25" - 31" 2" 164951 $ 45.00 16" - 18" 50" - 57" 2" 164987 $ 73.00
4" 164952 74.00 4" 164988 122.00
5" 164953 89.00 5" 164989 147.00
6" 164954 104.00 6" 164990 171.00
Barrel Barrel
O.D. Circ. Width Item # Price O.D. Circ. Width Item # Price
10" - 12" 31" - 38" 2" 164960 $ 50.00 18" - 20" 57" - 63" 2" 164996 $ 79.00
4" 164961 84.00 4" 164997 132.00
5" 164962 101.00 5" 164998 158.00
6" 164963 118.00 6" 164999 184.00
10" - 12" 31" - 38" 8" 164964 151.00 18" - 20" 57" - 63" 8" 165000 237.00
10" 164965 185.00 10" 165001 290.00
12" 164966 218.00 12" 165002 343.00
14" 164967 252.00 14" 165003 395.00
16" 164968 286.00 16" 165004 448.00
Barrel
O.D. Circ. Width Item # Price
12" - 14" 38" - 44" 2" 164969 $ 58.00
4" 164970 97.00
5" 164971 117.00
6" 164972 136.00
12" - 14" 38" - 44" 8" 164973 175.00
10" 164974 214.00
12" 164975 253.00
14" 164976 292.00
16" 164977 331.00
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-046/3-012615 687
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
Date: ____________ Quantity: _______ Phone: ( _______ ) ____________________ Fax: ( _______ ) ___________________
Address: ___________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
688 B13-2-047 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TM
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-048 689
White Board Mold Insulation
TM Reduce heat loss and begin molding better parts
3 Bar Quality
Electrical Properties
Electric Strength-
Perpendicular S/T in Air ASTM D 149 Vpm 50 kv/mm 2
Physical Properties
Water Absorption ASTM D 570 % by wt. 0.02 % by wt. 0.02
Density ASTM D 792 lbs/ft3 123 g/cm sq 1.97
Thickness Tolerance Inches 0.002 mm 0.05
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
690 B13-2-049 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Combination Mini Digital MultiMeter
with built-in, non-contact AC Voltage Detector 3 Bar Quality
TM
CAT III
Test Leads
Bead Wire
(54" long)
Temperature Probe
(39" long)
SPECIFICATIONS (Not Shown)
Display Counts: .................................................................................... 4000
Basic Accuracy: .................................................................................... 0.5%
NC Voltage Detector: ........................................................ 100 to 600VAC Item #141779
DC Voltage: ......................................................................... 0.1mV to 600V
Includes: Meter, Test Leads, Bead Wire Temperature
AC Voltage: ......................................................................... 0.1mV to 600V
Probe, Protective Holster with Stand, two AAA Batteries
AC/DC Current: ..................................................................... 0.1μA to 10A and One Year Limited Warranty
Resistance: ......................................................................... 0.1Ω to 40MΩ
Capacitance: ................................................................. 0.001nF to 200μF
Frequency: .................................................................... 0.001Hz to 10MHz
Temperature (Type K): ................... -4° F to 1382° F (-20° C to 750° C)
Just $61.80
Duty Cycle: .............................................................................. 0.1 to 99.9%
Diode/Continuity: .................................................................................... Yes IN STOCK – Order TODAY!
Size (including holster): ...... 5.8" l x 2.9" w x 1.6" d (147 x 76 x 42 mm)
Weight (including holster): ............................................... 9.17oz (260g) Also available with NIST Certification - INQUIRE
IMS also stocks many other Thermometers, MultiMeters and Voltage/Current Detectors - INQUIRE
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-2-050 691
True RMS Multimeter
3 Bar Quality
TM
Protective
Holster
• Built-in Laser Pointer helps ensure quick,
safe and accurate surface
temperature measurement. Just point
laser at Multi
• 8:1 distance to target ratio allows for
target Position
measurements in areas that are
surface Tilt Stand
normally difficult or unsafe to
and see with
reach. Fixed emissivity 0.95.
temperature built-in
(°F or °C) Hanger
Loop
Patent Pending
Velcro®
Wrist
Strap
for easy
CAT III Test Leads hanging
(54" long) Bead Wire
Temperature Probe (40" long)
SPECIFICATIONS (Not Shown)
Display: .......................................................................... 400 Counts Backlit
Basic Accuracy: .................................................................... ±0.3% (VDC)
DC/AC Voltage: .................................................................. 0.1mV to 600V
DC/AC Current: ..................................................................... 0.1μA to 20A
Item #132602
Resistance: ......................................................................... 0.1Ω to 40MΩ
Capacitance: .................................................................... 0.01nF to 100μF
Includes: Meter, Test Leads, Type K Tempera-
Frequency: .................................................................... 0.001Hz to 10MHz
ture Probe, Protective Holster, 9V Battery and
Temperature (Type K): ................... -4° F to 1382° F (-20° C to 750° C)
Three Year Limited Warranty
Temperature (IR with Laser): ......... -4° F to 518° F (-20° C to 270° C)
All for
Diode/Continuity: .................................................................................... Yes
Size: ...................................................................... 7.36" l x 3.2" w x 2.0" d
Weight: ............................................................................................. .753 lbs
ONLY $157.35
IN STOCK Velcro® is a registered trademark of Velcro Companies
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
692 B13-2-051 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Wear Plates
Pages 698 – 709
®
The
Original
Buyers Wear Strips
Pages 710 – 715
Guide
Engineered
Bushings
Components & Supplies Pages 716 – 731
Catalog B3:
Pins
Pages 732 – 747
Guide Components
Pages 769 – 780
Parting Lines
Pages 789 – 796
Ball Bearings
Pages 797 – 807
Compression Springs
Pages 808 – 817
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
694 B13-3-002 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TABLE OF CONTENTS
Wear Plates Page
N Series Wear Plates - Inch ....................................... 698
A Series Wear Plates - Inch ........................................ 699
Grease Groove Wear Plates - Inch ............................ 700
SMC Lower Heel Wear Plates..................................... 701
SMC Upper Heel Wear Plates .................................... 702
NAAMS Wear Plates - Metric (W Series) ....................703
JIS Wear Plates - Metric (B Series) ............................ 704
VDI Wear Plates - Metric .............................................705
NAAMS VDI Wear Plates (W05, W06, W07 Series) .... 706
Cam Dwell Wear Plates - Inch .................................... 707
NAAMS Cam Dwell Wear Plates ................................ 708
SESW/ SESWT Wear Plates ...................................... 709
Bushings Page
Shoulder Bushings ..................................................... 716
Straight Bushings ....................................................... 717
Guided Ejector Bushings ........................................... 718
Guide Pin Bushings - Inch ......................................... 719
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-003/1 695
TABLE OF CONTENTS
Pins & Ejectors Page
Straight Leader Pins ................................................... 732
Guide Pins - Inch ........................................................ 733
Demountable Guide Posts ......................................... 734
Straight Guide Posts - Metric ..................................... 735
NAAMS Guide Pins .................................................... 736
Nitrided Ejector Pins .................................................. 737
Nitrided Ejector Pins - Shoulder ................................ 738
Through Hardened Ejector Pins ................................ 739
Nitrided Ejector Pins - Metric ..................................... 740
Through Hardened Ejector Pins - Metric ............ 741-742
Through Hardened Blade Ejectors ............................ 743
Sleeve Ejectors .......................................................... 744
Core Pins .................................................................... 745
Return Pins ................................................................. 746
Unikix Spring Pins ...................................................... 747
Gibs Page
L-Gibs (Aluminum Bronze) ......................................... 748
Laminated Style L-Gibs (Solid Bronze) ...................... 749
L-Gibs - Metric (Aluminum Bronze) ............................ 750
V-Gibs (Solid Bronze) ................................................. 751
V-Gibs (with Graphite) ................................................ 752
Square Gibs (Solid Bronze) ....................................... 753
Square Gibs (Drilled with Graphite) ........................... 754
Bronze T-Slides .......................................................... 755
B3: Mold & Die Components
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
696 B13-3-003/2 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TABLE OF CONTENTS
Guide Components Page
Cam Gibs - Inch ......................................................... 769
NAAMS Cam Gibs - 10mm Lip .................................. 770
NAAMS Cam Gibs - 13mm Lip .................................. 771
Gib Blocks and Lids (Aluminum Bronze) .................. 772
Keeper (Gib) Plates - Inch .......................................... 773
NAAMS Keeper Plates ............................................... 774
Center Keys and Guides ............................................ 775
U and V Blocks - 2.88 Inch ........................................ 776
U and V Blocks - 4.88 Inch ........................................ 777
NAAMS U and V Blocks - 65mm ............................... 778
NAAMS U and V Blocks - 75mm ............................... 779
NAAMS U and V Blocks - 125mm ............................. 780
Blocks Page
Guide Blocks - Medium Duty ..................................... 781
NAAMS Guide Blocks - 45mm ................................... 782
NAAMS Guide Blocks - 60mm ................................... 783
K Series Keeper Blocks - Light Duty .......................... 784
KM Series Keeper Blocks - Medium Duty .................. 785
KH Series Keeper Blocks - Heavy Duty ..................... 786
NAAMS Keeper Blocks - 6mm Lip ............................. 787
NAAMS Keeper Blocks - 13mm Lip ........................... 788
Springs Page
Medium Load Springs ........................................ 808-810
Medium-High Load Springs ................................ 810-813
Heavy Load Springs ........................................... 813-815
Extra Heavy Load Springs .................................. 815-816
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-003/3 697
N Series Wear Plates - Inch
• Comes standard in either aluminum bronze with graphite
plugs or plain steel.
• Steel with Graphite Plugs and longer lengths are available
on a special order basis.
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
698 B13-3-004 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
A Series Wear Plates - Inch
• Comes standard in either aluminum bronze with
graphite plugs or plain steel.
• Steel with Graphite Plugs and longer lengths are
available on a special order basis.
155486 155461
155487 155462
155488 155463
155489 155464
155490 155465
155491 155466
155492 155467
155493 155468
155494 155469
155495 155470
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-005 699
Grease Groove Wear Plates - Inch
Made in the U.S.A
155615 155613
155616 155619
155608 155610
155576 155529
155609 155611
155618 155612
155578 155532
155579 155533
155580 155534
155581 155535
155582 155536
155583 155537
B3: Mold & Die Components
155584 155538
155585 155539
155605 155606
155588 155542
155589 155543
155590 155544
155591 155545
155592 155546
155593 155547
155594 155548
155595 155549
155596 155550
155603 155554
155620 155555
155621 155556
155607 155557
155601 155558
155614 155559
155604 155560
155617 155561
155602 155566
155527 157541
155600 155568
155599 155569
155597 155570
155598 155571
700 B13-3-006 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
SMC Lower Heel Wear Plates (with or without Graphite)
155622 155638
155623 155639
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-007 701
SMC Upper Heel Wear Plates
Made in the U.S.A
155654
155655
155656
155657
155658
B3: Mold & Die Components
155659
155660
155661
155662
155663
155664
155665
155666
155667
155668
155669
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
702 B13-3-008 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS Wear Plates - Metric (W Series)
Made in the U.S.A
155684 155706
155713 155714
155685 155707
155686 155708
155687 155709
155688 155710
155689 155711
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-009 703
JIS Wear Plates - Metric (B Series)
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
704 B13-3-010 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
VDI Wear Plates - Metric
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-011 705
NAAMS VDI Wear Plates (W05, W06, W07 Series)
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
706 B13-3-012 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Cam Dwell Wear Plates - Inch
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-013 707
NAAMS Cam Dwell Wear Plates
Made in the U.S.A
B3: Mold & Die Components
155921 155922
155924 155932
155925 155923
155926 155933
155927 155934
155928 155935
155929 155936
155930 155937
155931 155938
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
708 B13-3-014 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Style: J SESW J SESWT
2. Width: ____________________________
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-015 709
40" Wear Strips
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
710 B13-3-016 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Wear Strips - Inch
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-017 711
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
5. Graphite: J Yes J No
City: _____________________________________ State: _______ Zip: ____________________
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
712 B13-3-018 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Thickness: _______________________________
2. Width: __________________________________
3. Length: _________________________________
Name:___________________________________ Email:________________________________
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-019 713
Wear Strips - Metric (with Graphite)
Made in the U.S.A
B3: Mold & Die Components
151150
151152
151154
151156
151158
151160
151151
151153
151155
151157
151159
151161
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
714 B13-3-020 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Length: _____________________________________________
2. NAAMS Suffix: _______________________________________
Name:___________________________________ Email:________________________________
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-021 715
Shoulder Bushings
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
716 B13-3-022 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Straight Bushings
Made in the U.S.A
151921
151891 151893 151899 151928 151906
151890 157630 151894 151900 151922
151924 151933 151895 151901 151926 151907 151912
151896 151902 151929
151903 151923
151897 151904 151927 151908 151913 151916
151909 151917
151898 151905 151925 151910 151914 151918
151919
151911
151930 151968
157631 151934 151939 151946 151966
151931 157632 151935 151940 151947
151932 151933 151936 151941 151948 151953 151957
151965 151942 151949
151943 151950
151937 151944 151951 151954 151958 151960
151961
151938 151945 151952 151955 151959 151962
151963
151956
151967 151964
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-023 717
Guided Ejector Bushings
Made in the U.S.A
151973
151974
151975
151976
151977
151978
B3: Mold & Die Components
151979
151980
151981
151983
151984
151985
151990
151986
151989
151982
151988
151987
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
718 B13-3-024 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Guide Pin Bushings - Inch
Made in the U.S.A
157741
157742
157743
157744
157745
157746
157749
157748
157751
157750
157753
157754
157752
157755
157756
157757
157758
157759
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-025 719
Demountable Guide Pin Bushings
Made in the U.S.A
157833
157834
157835
157836
157837
B3: Mold & Die Components
157838
157839
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
720 B13-3-026 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Laminated Style Die Bushings
Made in the U.S.A
157792 157794
157796 157801
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-027 721
NAAMS Guide Pin Bushings
Made in the U.S.A
157762
157764
157765
157766
B3: Mold & Die Components
157768
157769
157773
157772
157775
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
722 B13-3-028 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS Pad Bushings - Metric
Made in the U.S.A
157777
157781
157783
157785
157787
157789
157791
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-029 723
SPB Straight Bushings - Metric
Made in the U.S.A
152152
152126
152153 152185
152127
152154 152186
152128
152155 152187
152109
152156 152188
152129
152157 152189
152130
152158 152190
152131
152159
152132
152191
152160
152133
152161
152192
152134 152162
152193
152135 152163
152194
152136 152164
152195
152165
152137
152196
152166
152138 152197
152167
152139 152198
152168
152110 152169 152199
152140 152170 152200
152112 152171 152201
®®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com phonephone
order order
(USA (USA
toll-free
& Canada) 1.800.537.5375
1.800.537.5375
1.800.537.5375
toll-free
& Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phonephone
order order
toll-free
toll-free
(Mexico)
(Mexico) tech support
tech support
toll-free toll-free
(USA & (USA
Canada)
& Canada) e-mail
e-mail
Engineered
Engineered
Components
Components&&Supplies
Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 001.888.304.13071.866.467.9001 components@imscompany.com
1.866.467.9001 sales@imscompany.com
724 B13-3-030 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
SPB Straight Bushings - Metric
152211 152311
152261
152212 152262 152312
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-031 725
SPF Flanged Bushings - Metric
Made in the U.S.A
152043 152078
152044 152079
152045 152080
152046 152081
152047 152082
152048 152083
152049 152084
152085
152050
152086
152051
152087
152052
152088
152053
B3: Mold & Die Components
152089
152054
152055 152090
152056 152091
152057 152092
152058 152093
152059
152094
152060
152061
152062 152095
152063
152064 152096
152065 152097
152066
152067 152098
152068
152099
152069
152070 152100
152071 152101
152072 152102
152073 152103
152074 152104
152075 152105
152076 152106
152077 152107
726 B13-3-032 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
LBBM Shoulder Bushings - Metric
Made in the U.S.A
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-033 727
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Style: J SEGB J SEGBK
2. Inside Diameter (d): ______________________
3. Length (L): _____________________________
4. Graphite: J Yes J No
B3: Mold & Die Components
728 B13-3-034 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Sprue Bushings - AB Series
Made in the U.S.A
155058 155076
155059 155077
155060 155078
155061 155079
155062 155080
155063 155081
155064 155082
155065 155083
155066 155084
155067 155085
155068 155086
155069 155087
155070 155088
155071 155089
155072 155090
155073 155091
155074 155092
155075 155093
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-035 729
Sprue Bushings - AE/A Series
Made in the U.S.A
155196 157609
155197 157610
155198 157611
155199 157612
155200 157613
155201 157614
155202 157615
155203 157616
155204 157617
155205 157618
155206 157619
155207 157620
B3: Mold & Die Components
155208 155236
155209 155237
155210 155238
155211 155239
155212 155240
155213 155241
155214 155242
155215 155243
155216 155244
155217 155245
155218 155246
155219 155247
155220 155248
155221 155249
155222 155250
155223 155251
155224 155252
155225 155253
155226 155254
155227 155255
155228 155256
155229 157648
155230 155257
155231 155258
155232 155259
155233 155260
155234 155261
155235 155262
730 B13-3-036 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Sprue Bushings - UR/AR Series
Made in the U.S.A
155263
155264
155265
155266
155267
155268 155273
155270 155275
155271 155276
155272 155277
155278 155281
155279 155282
155280 155283
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-037 731
Straight Leader Pins
Precision Made
in Germany
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
732 B13-3-038 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Guide Pins - Inch
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-039 733
Demountable Guide Posts
158021
158022 158030 158042
158023 158031 158044
158024 158033 158045
158025 158035 158048 158059 158071
158026 158036 158050
158027 158038 158051 158062 158073
158028 158040 158052
158029 158065 158076 158088 158097
158041 158055
158032 158068 158079 158090 158099
158046 158057
158034 158070 158080 158092 158100
158049 158060
158037 158072 158082
158053 158061
158039 158075 158084 158095 158102
B3: Mold & Die Components
158054 158064
158043
158056 158067
158047 158078 158085 158096 158105
158058 158069
158081 158087 158098 158106
158063 158074
158083 158089 158101 158108
158066 158077
158086 158093 158104 158110
158091 158094
158109 158112
158103
158111 158113
158107
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
734 B13-3-040 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Straight Guide Posts - Metric
157407 157414
157408 157415 157424
157409 157416 157425 157434
157410 157417 157426 157435
157411 157418 157427 157436 157444
157412 157419 157428 157437 157445
157413 157420 157429 157438 157446 157454
157421 157430 157439 157447 157455
157422 157431 157440 157448 157456
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-041 735
NAAMS Guide Pins - Metric
157974 157995
157975 157996
157976 157998
157977 158000
157979 158001
157981 158006
157983 158003
157985 158004
157987
158005
B3: Mold & Die Components
157978
158008
157980
158007
157982
158010
157984
158012
157986
158013
157988
158009
157989
158011
157990
158014
157991
158015
157992
157993 158016
157994 158017
157999 158018
157997 158019
158002 158020
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
736 B13-3-042 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Nitrided Ejector Pins
Precision Made
in Germany
152854
152750 152751
152752 152739 152753 152754 152755 152756 152741 152865
152757 152758
152759 152760 152761 152762 152763
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-043 737
Nitrided Ejector Pins - Shoulder
Precision Made
in Germany
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
738 B13-3-044 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Through Hardened Ejector Pins
Precision Made
in Germany
153328 153329
153330 153331
153332 153333 153334 153335
153336 153337 153338 153339
153340 153341 153342 153343
153344 153345 153346 153347
153348 153349 153350 153351 153352 153353
153354 153355 153356 153357
153358 153359 153360 153361 153362 153363
153364 153365 153366 153367
153368 153369 153370 153371 153372 153373
153374 153375 153376 153377
153378 153379 153380 153381 153382 153383
153384 153385 153386 153387
153388 153389 153390 153391 153392 153393
153394 153395 153396 153397
153398 153399 153400 153401 153402
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-045 739
Nitrided Ejector Pins - Metric (DIN 1530A)
Precision Made
in Germany
153655 153656 153657 153658 153659 153660 153661 153662 153663 153664 153665
153667 153668 153669 153670 153671 153672 153673 153674 153675 153676
153677 153678 153679 153680 153681 153682 153683 153684
153688 153689 153690 153691 153692 153693 153694 153695 153696 153697 153698
153703 153704 153705 153706 153707 153708 153709 153710 153711 153712 153713
153718 153719 153720 153721 153722 153723 153724 153725 153726 153727 153728
153731 153732 153733 153734 153735 153736 153737 153738 153739
153740 153741 153742 153743 153744 153745 153746 153747 153748 153891
153751 153752 153753 153754 153755 153756 153757 153758 153759 153760 153761
153765 153766 153767 153768 153769 153770 153771 153772 153773 153774
153775 153776 153777 153778 153779 153780 153781 153782 153783
153784 153785 153786 153787 153788 153789 153790 153791 153792
153793 153794 153795 153796 153797 153798 153799 153800 153801 153802 153803
153806 153807 153808 153809 153810 153811 153812 153813 153814 153815 153816
153817 153818 153819 153820 153821 153822 153823 153824 153825 153826
153827 153828 153829 153830 153831 153832 153833 153834 153835 153836 153837
153841 153842 153843 153844 153845 153846 153847 153848 153849 153850 153851
153856 153857 153858 153859 153860 153861 153862 153863 153864
153865 153866 153867 153868 153869 153870 153871 153872 153873
153875 153876 153877 153878 153879 153880 153881 153882
153883 153884 153885 153886 153887 153888 153889 153890
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
740 B13-3-046 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Through Hardened Ejector Pins - Metric (DIN 1530AH)
Precision Made
in Germany
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-047 741
Through Hardened Ejector Pins - Metric (DIN 1530AH)
Precision Made
continued from last page in Germany
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
742 B13-3-048 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Through Hardened Blade Ejectors - Metric
Precision Made
in Germany
152998 152999
153017 153018
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-049 743
Sleeve Ejectors
Precision Made
in Germany
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
744 B13-3-050 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Core Pins
Precision Made
in Germany
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-051 745
Return Pins
Precision Made
in Germany
153302
153303 153309
153304 153310
153318
153305 153311
153319
153306 153312
153320
153307 153313
153321
B3: Mold & Die Components
153308 153314
153322
153315
153323
153316
153324
153317
153325
153326
153327
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
746 B13-3-052 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
UNIKIX Spring Pins
155284
155285
155286
155287
155288
155289
Typical Applications
155293
155294
155295
155292
155290
155291
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-053 747
L-Gibs (Aluminum Bronze)
Made in the U.S.A
153909
153937
153938
153924
153916
B3: Mold & Die Components
153923
153951
153939
153940
153941
153942
153914
153943
153910
153912
153908
153907
153944
153945
153946
153947
153917
153915
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
748 B13-3-054 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Laminated Style L-Gibs (Solid Bronze)
Made in the U.S.A
154018
154019
154020 154043
154034 154034
157639
154021
157640
154022
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-055 749
L-Gibs - Metric (Aluminum Bronze)
Made in the U.S.A
158152
B3: Mold & Die Components
158154
158158
158160
158161
158163
158165
158167
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
750 B13-3-056 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
V-Gibs (Solid Bronze)
Made in the U.S.A
158114
158117
158120
158115
158118
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-057 751
V-Gibs (with Graphite)
Made in the U.S.A
B3: Mold & Die Components
158127
158128
158130
158132
158129
158131
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
752 B13-3-058 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Square Gibs (Solid Bronze)
Made in the U.S.A
154057
154053
154055
154054
154051
154052
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-059 753
Square Gibs (Drilled with Graphite)
Made in the U.S.A
B3: Mold & Die Components
158133
158135
158137
158139
158142
158143
158141
158134
158136
158138
158140
158144
158147
158145
158146
158148
158150
158149
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
754 B13-3-060 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Bronze T-Slides
Made in the U.S.A
158169 158174
158170 158175
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-061 755
Mold Gib Assemblies
Made in the U.S.A
B3: Mold & Die Components
r. Techie’
M AVOID “ALL-PURPOSE”
1. No need BOLTS and
for messy drilling AND doweling.
WASHERS. The most costly mistake you can make,is to use
s
a bolt that is too short and strip the threads in a platen hole. Check clamp bolt engagement. It
2. When
should installed
enter in aatclose
die plate least fitting pocket, the
11/4 (preferably 11/2sides
) timesofthe
thebolt
pocket in combination
diameter. Commercialwith the
bolts,
Te c slide, locate the L-Gibs and keep them from moving.
socket head screws and soft steel washers require frequent, costly replacement, as bolt heads are too
h T i p s 3.
small
Whenand not
conventional
installedwashers bend
in a close whenpocket,
fitting used onorder
injection
Gibmolds. You canpre-assembled
Assemblies avoid damage to with
your
mold, cut your setup time and save money
dowels; width tolerance for these is +/-.005. wasted on makeshifts by using bolts and washers made
expressly for injection plants.
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
756 B13-3-062 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
PA Style Gib Assemblies
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-063 757
Standard Gib Assemblies
Made in the U.S.A
154129 154130
154160 154119 154131 154132
154157 154120 154135 154136
154158 154121 154133 154134 154154
154161 154122 154137 154138
154163 154162 154139 154140
154159 154124 154141 154142
154155
154150 154111 154113 154114
154152 154112 154115 154116
154164 154123 154143 154144
154165 154125 154145 154146 154156
154166 154126 154148 154147
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
758 B13-3-064 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Square Gib Assemblies (with or without Graphite)
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-065 759
MA Style Gib Assemblies
• Made to tighter tolerances Made in the U.S.A
• No doweling required
• Ideal for mold applications
B3: Mold & Die Components
r. Techie’
M No need for messy drilling and doweling.
s
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
760 B13-3-066 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Quick Slides
Made in the U.S.A
154276 154280
154277 154281
154278 154282
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-067 761
Quick Slides
continued from last page • Small footprint slide assembly Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
762 B13-3-068 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Trunnion Lifter Slides
Made in the U.S.A
• Reduces Build Time!
• Accommodates lifter rod angles up to 30 degrees
• Available with or without graphite
154285 154287
154283 154288
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-069 763
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Lifter Rod Diameter: _______________________
2. Graphite: J Yes J No
3. Preset Angle of Travel (in degrees): ___________
Name:___________________________________ Email:________________________________
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
764 B13-3-070 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-071 765
Trunnion Lifter Slides - Metric (Compact Style)
• Saves Build Time! Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
766 B13-3-072 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-073 767
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
Quantity: _______ Phone:( ______ ) _________________ Fax: (______ ) _________________
1. Lifter Rod Diameter: ___________________
Name: ___________________________________ Email: ________________________________
2. Preset Angle of Travel (in degrees): _______
Company Name: __________________________ Address:______________________________
3. Graphite: J Yes J No City: _____________________________________ State: _______ Zip: ____________________
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
768 B13-3-074 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Cam Gibs - Inch
Made in the U.S.A
156098
156096
156093
156094
156095
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-075 769
NAAMS Cam Gibs - 10mm Lip
Made in the U.S.A
B3: Mold & Die Components
156113
156114
156111
156112
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
770 B13-3-076 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS Cam Gibs - 13mm Lip
Made in the U.S.A
156117 156120
156115 156121
156118 156122
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
faxfaxorder
toll-free
ordertoll-free
toll-free
(USA(USA&(USA
Canada)
& &Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-077 771
Gib Blocks and Lids
Made in the U.S.A
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com 1.800.537.5375
1.800.537.5375
1.800.537.5375
phone order toll-free
(USA & Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 1.866.467.9001 components@imscompany.com
772 B13-3-078 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Keeper (Gib) Plates - Inch
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-079 773
NAAMS Keeper Plates
Made in the U.S.A
156130
156131
156132
156133
156134
156135
B3: Mold & Die Components
156136
156137
156138
156139
156140
156141
156142
156143
156126
156155
156128
156129
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
774 B13-3-080 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Center Keys and Guides
Made in the U.S.A
156086 156088
156084 156089
156081 156090
156082 156091
156083 156092
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-081 775
U and V Blocks - 2.88 Inch
Made in the U.S.A
B3: Mold & Die Components
156232 156235
156233 156236
156234 156237
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
776 B13-3-082 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
U and V Blocks - 4.88 Inch
Made in the U.S.A
156241 156243
156242 156240
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-083 777
NAAMS U and V Blocks - 65mm
Made in the U.S.A
B3: Mold & Die Components
156208 156212
156209 156213
156210 156214
156211 156215
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
778 B13-3-084 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS U and V Blocks - 75mm
Made in the U.S.A
156217 156221
156218 156222
156219 156223
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-085 779
NAAMS U and V Blocks - 125mm
Made in the U.S.A
B3: Mold & Die Components
156224 156228
156225 156229
156226 156230
156227 156231
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
780 B13-3-086 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Series: ______________________________________
2. Suffix: ______________________________________
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-087 781
NAAMS Guide Blocks - 45mm
Made in the U.S.A
156664
156665
156666
156667
156668
156669
156670
156671
156674
B3: Mold & Die Components
156675
156676
156677
156678
156679
156680
156681
156684
156685
156686
156691
156687
156688
156689
156690
156652
156653
156654
156655
156656
156657
156658
156659
156660
156661
156662
156663
156672
156673
156682
156683
782 B13-3-088 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS Guide Blocks - 60mm
Made in the U.S.A
156741
156742
156743
156744
156745
156740
156746
156747
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-089 783
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Prefix: ______________________________________
2. Suffix: ______________________________________
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
784 B13-3-090 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Prefix: ______________________________________
2. Suffix: ______________________________________
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-091 785
REQUEST FOR QUOTE: Make a copy. Scan and email to components@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Prefix: ______________________________________
2. Suffix: ______________________________________
B3: Mold & Die Components
®®
www.imscompany.com/ec
www.imscompany.com
www.imscompany.com phonephone
order order
(USA (USA
toll-free
& Canada) 1.800.537.5375
1.800.537.5375
1.800.537.5375
toll-free
& Canada)
fax order
fax
faxorder
order
toll-free
toll-free
toll-free
(USA(USA
(USA
& Canada)
&&Canada)
Canada) phonephone
order order
toll-free
toll-free
(Mexico)
(Mexico) tech support
tech support
toll-free toll-free
(USA & (USA
Canada)
& Canada) e-mail
e-mail
Engineered
Engineered
Components
Components&&Supplies
Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307
1.888.288.6900 001.888.304.13071.866.467.9001 components@imscompany.com
1.866.467.9001 sales@imscompany.com
786 B13-3-092 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
NAAMS Keeper Blocks - 6mm Lip
Made in the U.S.A
156796
156797
156812
156798
156813
156799
156800
156801
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-093 787
NAAMS Keeper Blocks - 13mm Lip
Made in the U.S.A
156861
156862
156863
156864
156865
156866
156867
156868
156869
156870
156871
156872
156873
156874
156875
B3: Mold & Die Components
156876
156877
156878
156879
156880
156881
156860
156882
156883
156884
156885
156886
156887
156888
156889
156890
156891
156892
156893
156894
156895
156896
156897
156898
156899
156900
156901
156902
156903
156904
156905
156906
156907
156908
788 B13-3-094 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Side Locks
Made in the U.S.A
153898
153892
153893
153894
153895
153896
153897
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-095 789
Top Locks
Made in the U.S.A
B3: Mold & Die Components
153900
153901
153902
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
790 B13-3-096 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Guide Locks
Made in the U.S.A
153904
153905
153906
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-097 791
Pin Plates
Made in the U.S.A
154355
154356
154357
B3: Mold & Die Components
154358
154365
154366
154367
154368
154354
154359
154364
154369
154362
154361
154352
154353
154360
154370
154371
154372
154373
154374
154375
154363
792 B13-3-098 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Stop Plates
Made in the U.S.A
154376
154377
154378
154379
154395
154396
154397
154398
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-099 793
LAM Stop Plates
Made in the U.S.A
B3: Mold & Die Components
158195
158196
158197
158200
158202
158198
158199
158201
158203
158204
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
794 B13-3-100 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
SMC Parting Line Stop Plates
Made in the U.S.A
154405
154406
154407
154408
154409
154410
154411
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-101 795
Hinge Blocks
Made in the U.S.A
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
796 B13-3-102 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Straight Ball Bearing Guide Posts
156944
156945
156946 156960 156975
156947
156948 156961
156949 156976 156994
156950 156962
156951 156963
156952 156964 156977 156995 157013
156953 156965 156978
156954 156966 156979 156996 157014
156955 156967 156980 156997
157015
156956 156968 156981 156998 157016
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-103 797
Demountable Ball Bearing Guide Posts
157054
157055
157056
157057 157069 157085
157058 157070 157086
157059 157071 157087 157106
157060 157072 157088 157107
157061 157073 157089 157108 157128
157062 157074 157090 157109 157129
157063 157075 157110 157130
157091 157131
157064 157076 157111 157132
157092 157133
157065 157077 157112 157134
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
798 B13-3-104 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Demountable Ball Bearing Guide Posts
continued from last page
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-105 799
Straight Sleeve Ball Bearings Bushings
157171
157172 157177 157183
157173 157178 157191
157184
157174 157179 157199
157192
157175 157180 157185
B3: Mold & Die Components
157200
157176 157181 157186 157193
157187 157194 157201
157182 157188 157195 157207 157213
157202
157208 157214
157189 157196 157203
157209 157215
157190 157197 157204
157210 157216
157198 157205
157211 157217
157206
157212 157218
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
800 B13-3-106 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Demountable Ball Bearing Bushings
157219
157226
157220 157223 157230
157233
157221 157224 157227
157231
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-107 801
Ball Bearing Cages
157244 157271
157245 157272
157246 157273
157247 157274
157248 157275
157249 157276
157250 157277
157251 157278
157252 157279
157253 157280
157254 157281
157255 157282
B3: Mold & Die Components
157283
157284
157285
157286
157256 157287
157257 157288
157258 157289
157259 157290
157260 157291
157261 157292
157262 157293
157263 157294
157264 157295
157265 157296
157266 157297
157267 157298
157268 157299
157269 157300
157270 157301
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
802 B13-3-108 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Straight Ball Bearing Guide Posts - Metric
157407 157414
157408 157415 157424
157409 157416 157425 157434
157410 157417 157426 157435
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-109 803
Demountable Ball Bearing Guide Posts - Metric
157468 157475
157469 157476
157470 157477 157484 157494
157471 157478 157485 157495 157504
157472 157479 157486 157496 157505 157516
157473 157480 157487 157497 157506 157517
157474 157481 157488 157498 157507 157518 157527
157482 157489 157499 157508 157519 157528
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
804 B13-3-110 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Striaght Sleeve Ball Bearing Bushings - Metric
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-111 805
Demountable Ball Bearing Bushings - Metric
157342
157343 157345 157348
B3: Mold & Die Components
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
806 B13-3-112 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Ball Bearing Cages - Metric
157362 157379
157621 157380
157622 157381
157363 157382
157364 157383
157623 157384
157366 157385
157367 157386
157624 157387
157391
157626 157392
157406 157393
157368 157394
157369 157395
157370 157396
157371 157397
157372 157399
157373 157400
157374 157401
157375 157402
157376 157403
157377 157404
157378 157405
®
www.imscompany.com/ec
www.imscompany.com 1.800.537.5375
phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-113 807
Die/Compression Springs
C
H
A B
G
D E F
A = Hole diameter (in) E = Operating travel (in)
B = Rod diameter (in) F = Initial compression (in)
C = Free length (in) G = Pre-load (lbs)
D = Compression length (in) H = Load required to deflect E+F (lbs)
r. Techie’
M
s
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
808 B13-3-114/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162123 3/4" 3/8" 1" 162 0.51 Rectangular
162124 3/4" 3/8" 1-1/4" 158 0.65 Rectangular
162125 3/4" 3/8" 1-1/2" 150 0.78 Rectangular
162126 3/4" 3/8" 1-3/4" 150 0.92 Rectangular
162127 3/4" 3/8" 2" 150 1.06 Rectangular
162128 3/4" 3/8" 2-1/2" 147 1.33 Rectangular
162129 3/4" 3/8" 3" 147 1.62 Rectangular
3/4" 3/8"
162130 3/4" 3/8" 3-1/2" 144 1.87 Rectangular
162131 3/4" 3/8" 4" 144 2.16 Rectangular
162132 3/4" 3/8" 4-1/2" 143 2.42 Rectangular
162133 3/4" 3/8" 5" 143 2.69 Rectangular
162134 3/4" 3/8" 5-1/2" 143 2.9 Rectangular
162135 3/4" 3/8" 6" 143 3.26 Rectangular
162136 3/4" 3/8" 12" 140 6.48 Rectangular
162137 1" 1/2" 1" 311 0.51 Rectangular
162138 1" 1/2" 1-1/4" 299 0.65 Rectangular
162139 1" 1/2" 1-1/2" 292 0.79 Rectangular
162140 1" 1/2" 1-3/4" 281 0.92 Rectangular
162141 1" 1/2" 2" 280 1.06 Rectangular
162142 1" 1/2" 2-1/2" 270 1.32 Rectangular
162143 1" 1/2" 3" 265 1.59 Rectangular
162144 1" 1/2" 3-1/2" 261 1.85 Rectangular
1" 1/2"
162145 1" 1/2" 4" 255 2.11 Rectangular
162146 1" 1/2" 4-1/2" 254 2.37 Rectangular
162147 1" 1/2" 5" 254 2.65 Rectangular
162148 1" 1/2" 5-1/2" 255 2.93 Rectangular
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-114/2 809
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162168 1-1/2" 3/4" 2" 609 1.01 Rectangular
162169 1-1/2" 3/4" 2-1/2" 582 1.27 Rectangular
162170 1-1/2" 3/4" 3" 575 1.53 Rectangular
162171 1-1/2" 3/4" 3-1/2" 572 1 Rectangular
162172 1-1/2" 3/4" 4" 565 2.07 Rectangular
162173 1-1/2" 3/4" 4-1/2" 561 2.33 Rectangular
162174 1-1/2"
1-1/2" 3/4"
3/4" 5" 559 2.59 Rectangular
162175 1-1/2" 3/4" 5-1/2" 559 2.88 Rectangular
162176 1-1/2" 3/4" 6" 549 3.12 Rectangular
162177 1-1/2" 3/4" 7" 546 3.64 Rectangular
162178 1-1/2" 3/4" 8" 528 4.06 Rectangular
162179 1-1/2" 3/4" 10" 524 5.09 Rectangular
162180 1-1/2" 3/4" 12" 516 6.1 Rectangular
162181 2" 1" 2-1/2" 1148 1.28 Rectangular
162182 2" 1" 3" 1098 1.53 Rectangular
162183 2" 1" 3-1/2" 1076 1.8 Rectangular
162184 2" 1" 4" 1062 2.07 Rectangular
162185 2" 1" 4-1/2" 1044 2.33 Rectangular
162186 2" 1" 5" 1029 2.58 Rectangular
2" 1"
162187 2" 1" 5-1/2" 1029 2.86 Rectangular
162188 2" 1" 6" 1017 3.12 Rectangular
162189 2" 1" 7" 1007 3.65 Rectangular
162190 2" 1" 8" 984 4.15 Rectangular
162191 2" 1" 10" 978 5.2 Rectangular
162192 2" 1" 12" 960 6.23 Rectangular
B3: Mold & Die Components
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
810 B13-3-114/3 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162211 1/2" 9/32" 1" 55.9 0.43 Round
162212 1/2" 9/32" 1-1/4" 54.9 0.55 Round
162213 1/2" 9/32" 1-1/2" 54.6 0.67 Round
162214 1/2" 9/32" 1-3/4" 53.2 0.79 Round
162215 1/2"
1/2" 9/32"
9/32" 2" 53 0.91 Round
162216 1/2" 9/32" 2-1/2" 52 1.15 Round
162217 1/2" 9/32" 3" 50.8 1.37 Round
162218 1/2" 9/32" 3-1/2" 51.3 1.62 Round
162219 1/2" 9/32" 12" 50.5 5.72 Round
162220 5/8" 11/32" 1" 81 0.42 Round
162221 5/8" 11/32" 1-1/4" 75.8 0.53 Round
162222 5/8" 11/32" 1-1/2" 74.8 0.65 Round
162223 5/8" 11/32" 1-3/4" 72.4 0.76 Round
162224 5/8" 11/32" 2" 70.7 0.87 Round
5/8" 11/32"
162225 5/8" 11/32" 2-1/2" 69 1.1 Round
162226 5/8" 11/32" 3" 68.1 1.33 Round
162227 5/8" 11/32" 3-1/2" 67.9 1.56 Round
162228 5/8" 11/32" 4" 67.7 1.79 Round
162229 5/8" 11/32" 12" 66 5.5 Round
162230 3/4" 3/8" 1" 227 0.44 Rectangular
162231 3/4" 3/8" 1-1/4" 212 0.55 Rectangular
162232 3/4" 3/8" 1-1/2" 206 0.66 Rectangular
162233 3/4" 3/8" 1-3/4" 197 0.76 Rectangular
162234 3/4" 3/8" 2" 194 0.87 Rectangular
162235 3/4" 3/8" 2-1/2" 189 1.09 Rectangular
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
812 B13-3-114/5 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162301 2-1/2" 1-1/2" 3" 2240 1.29 Rectangular
161834 2-1/2" 1-1/2" 3-1/2" 2160 1.52 Rectangular
162302 2-1/2" 1-1/2" 4" 2104 1.74 Rectangular
162303 2-1/2" 1-1/2" 4-1/2" 2103 1.98 Rectangular
162304 2-1/2" 1-1/2" 5" 2080 2.22 Rectangular
162305 2-1/2"
2-1/2" 1-1/2"
1-1/2" 6" 2024 2.67 Rectangular
162306 2-1/2" 1-1/2" 7" 1987 3.12 Rectangular
162307 2-1/2" 1-1/2" 8" 1960 3.57 Rectangular
162308 2-1/2" 1-1/2" 9" 1960 4.06 Rectangular
162309 2-1/2" 1-1/2" 10" 1960 4.56 Rectangular
162310 2-1/2" 1-1/2" 12" 1960 5.4 Rectangular
Red - Heavy Duty RED - Heavy Duty Load
162311 3/8" 3/16" 1" 43 0.35 Round
162312 3/8" 3/16" 1-1/4" 43 0.46 Round
162313 3/8" 3/16" 1-1/2" 42 0.55 Round
162314 3/8" 3/16" 1-3/4" 42 0.66 Round
3/8" 3/16"
162315 3/8" 3/16" 2" 42 0.75 Round
162316 3/8" 3/16" 2-1/2" 42 0.97 Round
162317 3/8" 3/16" 3" 42 1.15 Round
162318 3/8" 3/16" 12" 41 4.74 Round
162319 1/2" 9/32" 1" 78 0.34 Round
162320 1/2" 9/32" 1-1/4" 76 0.44 Round
162321 1/2" 9/32" 1-1/2" 74 0.53 Round
162322 1/2" 9/32" 1-3/4" 73 0.63 Round
161981 1/2"
1/2" 9/32"
9/32" 2" 73 0.75 Round
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-114/6 813
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162336 3/4" 3/8" 1" 436 0.33 Rectangular
162337 3/4" 3/8" 1-1/4" 418 0.42 Rectangular
162338 3/4" 3/8" 1-1/2" 404 0.51 Rectangular
162339 3/4" 3/8" 1-3/4" 383 0.59 Rectangular
162340 3/4" 3/8" 2" 375 0.67 Rectangular
162341 3/4" 3/8" 2-1/2" 377 0.86 Rectangular
162342 3/4" 3/8" 3" 373 1.03 Rectangular
3/4" 3/8"
162343 3/4" 3/8" 3-1/2" 371 1.21 Rectangular
162344 3/4" 3/8" 4" 371 1.39 Rectangular
162345 3/4" 3/8" 4-1/2" 371 1.58 Rectangular
162346 3/4" 3/8" 5" 371 1.75 Rectangular
162347 3/4" 3/8" 5-1/2" 371 1.92 Rectangular
162348 3/4" 3/8" 6" 371 2.11 Rectangular
162349 3/4" 3/8" 12" 360 4.18 Rectangular
162350 1" 1/2" 1-1/4" 663 0.42 Rectangular
162351 1" 1/2" 1-1/2" 639 0.51 Rectangular
162352 1" 1/2" 1-3/4" 642 0.61 Rectangular
162353 1" 1/2" 2" 638 0.71 Rectangular
162354 1" 1/2" 2-1/2" 618 0.89 Rectangular
162355 1" 1/2" 3" 618 1.08 Rectangular
162356 1" 1/2" 3-1/2" 618 1.28 Rectangular
162357 1"
1" 1/2"
1/2" 4" 618 1.47 Rectangular
162358 1" 1/2" 4-1/2" 618 1.66 Rectangular
162359 1" 1/2" 5" 618 1.86 Rectangular
162360 1" 1/2" 5-1/2" 618 2.06 Rectangular
B3: Mold & Die Components
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
814 B13-3-114/7 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162380 1-1/2" 3/4" 2" 1388 0.69 Rectangular
162381 1-1/2" 3/4" 2-1/2" 1350 0.88 Rectangular
162382 1-1/2" 3/4" 3" 1340 1.07 Rectangular
162383 1-1/2" 3/4" 3-1/2" 1340 1.27 Rectangular
162384 1-1/2" 3/4" 4" 1333 1.47 Rectangular
162385 1-1/2" 3/4" 4-1/2" 1340 1.69 Rectangular
162386 1-1/2"
1-1/2" 3/4"
3/4" 5" 1337 1.87 Rectangular
162387 1-1/2" 3/4" 5-1/2" 1335 2.08 Rectangular
162388 1-1/2" 3/4" 6" 1347 2.28 Rectangular
162389 1-1/2" 3/4" 7" 1343 2.67 Rectangular
162390 1-1/2" 3/4" 8" 1347 3.07 Rectangular
162391 1-1/2" 3/4" 10" 1332 3.85 Rectangular
162392 1-1/2" 3/4" 12" 1339 4.65 Rectangular
162393 2" 1" 2-1/2" 2080 0.86 Rectangular
162394 2" 1" 3" 2007 1.04 Rectangular
162395 2" 1" 3-1/2" 1960 1.22 Rectangular
162396 2" 1" 4" 1960 1.43 Rectangular
162397 2" 1" 4-1/2" 1960 1.63 Rectangular
162398 2" 1" 5" 1935 1.79 Rectangular
2" 1"
162399 2" 1" 5-1/2" 1910 1.97 Rectangular
162400 2" 1" 6" 1910 2.15 Rectangular
162401 2" 1" 7" 1910 2.55 Rectangular
162402 2" 1" 8" 1910 2.91 Rectangular
162403 2" 1" 10" 1875 3.62 Rectangular
162404 2" 1" 12" 1875 4.45 Rectangular
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-114/8 815
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162420 5/8" 11/32" 1" 256 0.35 Round
162421 5/8" 11/32" 1-1/4" 230 0.43 Round
162422 5/8" 11/32" 1-1/2" 221 0.51 Round
162423 5/8" 11/32" 1-3/4" 220 0.6 Round
162424 5/8" 11/32" 2" 220 0.71 Round
5/8" 11/32"
162425 5/8" 11/32" 2-1/2" 218 0.88 Round
162426 5/8" 11/32" 3" 216 1.06 Round
162427 5/8" 11/32" 3-1/2" 215 1.26 Round
162428 5/8" 11/32" 4" 215 1.45 Round
162429 5/8" 11/32" 12" 214 4.43 Round
162430 3/4" 3/8" 1" 551 0.3 Rectangular
162431 3/4" 3/8" 1-1/4" 535 0.39 Rectangular
162432 3/4" 3/8" 1-1/2" 535 0.48 Rectangular
162433 3/4" 3/8" 1-3/4" 529 0.57 Rectangular
162434 3/4" 3/8" 2" 527 0.66 Rectangular
162435 3/4" 3/8" 2-1/2" 525 0.84 Rectangular
162436 3/4" 3/8" 3" 522 1.02 Rectangular
3/4" 3/8"
162437 3/4" 3/8" 3-1/2" 516 1.19 Rectangular
162438 3/4" 3/8" 4" 508 1.36 Rectangular
162439 3/4" 3/8" 4-1/2" 508 1.52 Rectangular
162440 3/4" 3/8" 5" 505 1.71 Rectangular
162441 3/4" 3/8" 5-1/2" 505 1.87 Rectangular
162442 3/4" 3/8" 6" 505 2.04 Rectangular
162443 3/4" 3/8" 12" 505 4.16 Rectangular
162444 1" 1/2" 1-1/4" 799 0.4 Rectangular
B3: Mold & Die Components
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
816 B13-3-114/9 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Die/Compression Springs (continued)
Catalog Outside Inside Load Deflect Wire
Length
Number Diameter Diameter (lbs) (in.) Construction
162459 1-1/4" 5/8" 1-1/2" 1231 0.44 Rectangular
162460 1-1/4" 5/8" 1-3/4" 1225 0.53 Rectangular
162461 1-1/4" 5/8" 2" 1222 0.62 Rectangular
162462 1-1/4" 5/8" 2-1/2" 1220 0.8 Rectangular
162463 1-1/4" 5/8" 3" 1200 0.97 Rectangular
162464 1-1/4" 5/8" 3-1/2" 1195 1.15 Rectangular
162465 1-1/4" 5/8" 4" 1160 1.3 Rectangular
162466 1-1/4"
1-1/4" 5/8"
5/8" 4-1/2" 1160 1.46 Rectangular
162467 1-1/4" 5/8" 5" 1160 1.64 Rectangular
162468 1-1/4" 5/8" 5-1/2" 1160 1.85 Rectangular
162469 1-1/4" 5/8" 6" 1160 2 Rectangular
162470 1-1/4" 5/8" 7" 1160 2.33 Rectangular
162471 1-1/4" 5/8" 8" 1160 2.69 Rectangular
162472 1-1/4" 5/8" 10" 1160 3.42 Rectangular
162473 1-1/4" 5/8" 12" 1160 4.14 Rectangular
162474 1-1/2" 3/4" 2" 1964 62 Rectangular
162475 1-1/2" 3/4" 2-1/2" 1885 0.78 Rectangular
162476 1-1/2" 3/4" 3" 1834 0.95 Rectangular
162477 1-1/2" 3/4" 3-1/2" 1802 1.12 Rectangular
162478 1-1/2" 3/4" 4" 1813 1.3 Rectangular
162479 1-1/2" 3/4" 4-1/2" 1796 1.47 Rectangular
162480 1-1/2"
1-1/2" 3/4"
3/4" 5" 1779 1.64 Rectangular
162481 1-1/2" 3/4" 5-1/2" 1774 1.81 Rectangular
162482 1-1/2" 3/4" 6" 1754 1.97 Rectangular
162483 1-1/2" 3/4" 7" 1733 2.31 Rectangular
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-3-114/10 817
INDEX
Blocks - Hinge ........................................................... 796 Keeper (Gib) Plates - Inch .......................................... 773
Blocks - NAAMS U and V - 125mm ........................... 780 Keeper Blocks - K Series - Light Duty ........................ 784
Blocks - NAAMS U and V - 65mm ............................. 778 Keeper Blocks - KH Series - Heavy Duty ................... 786
Blocks - NAAMS U and V - 75mm ............................. 779 Keeper Blocks - KM Series - Medium Duty ............... 785
Blocks - U and V - 2.88 Inch ...................................... 776 Keeper Blocks - NAAMS - 13mm Lip ......................... 785
Blocks - U and V - 4.88 Inch ...................................... 777 Keeper Blocks - NAAMS - 6mm Lip ........................... 787
Bushings - Demountable B.B. - Inch ......................... 801 Keeper Plates - NAAMS ............................................ 774
Bushings - Demountable B.B. - Metric ...................... 805 Keys and Guides - Center........................................... 775
Bushings - Demountable Guide Pin ......................... 720 Leader Pins - Straight ............................................... 732
Bushings - Guide Pin - Inch ....................................... 719 L-Gibs - Laminated Style - (Solid Bronze) ................. 749
Bushings - Guided Ejector ........................................ 718 L-Gibs - Metric (Aluminum Bronze) ............................ 750
Bushings - Laminated Style Die ................................ 721 L-Gibs (Aluminum Bronze) ......................................... 748
Bushings - LBBM Shoulder - Metric .......................... 727 Locks - Guide ............................................................ 791
Bushings - NAAMS Guide Pin ................................... 722 Locks - Side .............................................................. 789
Bushings - NAAMS Pad ............................................ 723 Locks - Top ................................................................ 790
Bushings - SEGB/ SEGBK Ejector Guide ..................728 Pin Plates ................................................................... 792
Bushings - Shoulder ................................................. 716 Pins - Core ................................................................. 745
Bushings - SPB Straight - Metric ........................ 724-725 Pins - Return .............................................................. 746
Bushings - SPF Flanged - Metric ............................... 726 Pins - Unikix Spring ................................................... 747
Bushings - Sprue - AB Series .................................... 729 Slides - Quick ...................................................... 761-762
Bushings - Sprue - AE/A Series ................................. 730 Slides - Trunnion Lifter .............................................. 763
Bushings - Sprue - UR/AR Series .............................. 731 Slides - Trunnion Lifter
Bushings - Straight .................................................... 717 (Angled with Rod Length Adjuster) ...................... 765
Bushings - Straight Sleeve B.B. - Metric .................... 805 Slides - Trunnion Lifter (Angled) ............................... 764
Bushings -Straight Sleeve B.B. - Inch ........................ 800 Slides - Trunnion Lifter - Metric
Cages - B.B. - Inch ..................................................... 802 (Angled with Rod Length Adjuster) ...................... 768
Cages - B.B. - Metric .................................................. 807 Slides - Trunnion Lifter - Metric (Angled) ................... 767
Cam Gibs - Inch ......................................................... 769 Slides - Trunnion Lifter - Metric (Compact Style) ....... 766
Cam Gibs - NAAMS - 10mm Lip ................................ 770 Springs - Compression ........................................808-816
B3: Mold & Die Components
Cam Gibs - NAAMS - 13mm Lip ................................ 771 Square Gibs (Drilled with Graphite) ........................... 754
Ejector Pins - Nitrided ............................................... 737 Square Gibs (Solid Bronze) ....................................... 753
Ejector Pins - Nitrided - Metric ................................... 740 Stop Plates ................................................................. 793
Ejector Pins - Nitrided - Shoulder .............................. 738 Stop Plates - LAM ...................................................... 794
Ejector Pins - Through Hardened ............................. 739 Stop Plates - SMC Parting Line ................................. 795
Ejector Pins -Through Hardened - Metric ........... 741-742 T-Slides - Bronze ........................................................ 755
Ejectors - Sleeve ....................................................... 744 V-Gibs (Solid Bronze) ................................................. 751
Ejectors - Through Hardened Blade ......................... 743 V-Gibs (with Graphite) ................................................ 752
Gib Assemblies - MA Style ......................................... 760 Wear Plates - A Series - Inch ..................................... 699
Gib Assemblies - Mold ............................................... 756 Wear Plates - Grease Groove - Inch .......................... 700
Gib Assemblies - PA Style ......................................... 757 Wear Plates - JIS - Metric (B Series) .......................... 704
Gib Assemblies - Square .......................................... 759 Wear Plates - N Series - Inch ..................................... 698
Gib Assemblies - Standard ....................................... 758 Wear Plates - NAAMS - Metric (W Series) .................703
Gib Blocks and Lids (Aluminum Bronze) .................. 772 Wear Plates - NAAMS Cam Dwell ............................. 707
Guide Blocks - Medium Duty ..................................... 781 Wear Plates - NAAMS VDI (W05, W06, W07 Series) .. 706
Guide Blocks - NAAMS - 45mm ................................. 782 Wear Plates - SESW/ SESWT ................................... 709
Guide Blocks - NAAMS - 60mm ................................. 783 Wear Plates - SMC Lower Heel .................................. 701
Guide Pins - Inch ........................................................ 733 Wear Plates - SMC Upper Heel ................................. 702
Guide Pins - NAAMS ................................................. 736 Wear Plates - VDI - Metric ...........................................705
Guide Posts - Demountable ...................................... 734 Wear Plates -Cam Dwell - Inch .................................. 707
Guide Posts - Demountable B.B. - Metric .................. 804 Wear Strips - 40” ....................................................... 710
Guide Posts - Straight - Metric ................................... 735 Wear Strips - Any Size .............................................. 713
Guide Posts - Straight B.B. - Inch .............................. 797 Wear Strips - Inch ................................................ 711-712
Guide Posts - Straight B.B. - Metric ........................... 803 Wear Strips - Metric (with Graphite) ............................714
Guide Posts -Demountable B.B. - Inch ............... 798-799 Wear Strips - NAAMS ................................................ 715
818 B13-3-115 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
LIME BUSTER™ Mold
Water Passage Cleaners
®
Pages 820 – 824
The
Original
Mold Cleaners
Buyers Pages 825 – 828
Guide
Mold Rust Preventives
Engineered Pages 829 – 831
Components & Supplies
Mold Polishes
Pages 832 – 833
Catalog B4:
Mold Lubricants
General
Pages 834 – 835
Mold Maintenance
Tools, Limit Switches,
Insulation & Access.
Pages 886 – 900
Safety Equipment
Pages 912 – 914
B4: General Mold Care
Select
5 Bar Quality
TM
QUICKLY DISSOLVES and FLUSHES AWAY Made in the U.S.A
EASY
TO
USE!
Deposits in molds
directly affect
CYCLE TIMES and LIME BUSTER III™ flushes deposits from pas-
sages. Heat transfer becomes faster; cycles get
PART QUALITY GREEN Products
shorter. You get full temperature control over
the entire mold.
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
820 B13-4-002 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
MOLD WATER-PASSAGE CLEANER
®
Select
PVC Manifolds
and supplied
Plumbing Kit
speed and simplify
Combination
mold hook-up
Handle &
Cord Wrap
for added
convenience
Only from IMS
5 ft. Grounded
Easy-Pour Wide-Mouth Power Cord
Tank Fill and Drain with Plug
High-Flow
SOLVENTOL® 2409
CPVC Plastic
changes from
Pump with
purple to yellow as
Thermally Protected
it cleans, indicating
Continuous Duty
acid strength.
Motor
Durable Integral
Welded Grounded
Polypropylene Switch Box
Construction
Quality
All-Swivel Casters
with Rubber Wheels
Plastic Frame, Tank,
for easy positioning
Pump, Fittings and Hardware
ensure corrosion resistance and long life
See Next
#110469 Kit Includes: Page for
Convenient Barbed Polyethylene Fittings: Qty. 1/2" N.P.T. Pricing 3/8"N.P.T.
Fitting
PLUMBING KIT 1/2" I.D. x 1/2" N.P.T. ...................................... 16 Fitting
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-003/1 821
®
user in mind!
Plumbing Kit
includes an
assortment of fittings,
plugs and clamps
$1525.75
Operating Capacity: ................................................. 5 to 11 gal.
Maximum Operating Temp: ............................................ 140° F
Pump Motor: ........................................ 1/5
hp, 3450 rpm, 115V For 115/60/1 operation
18 gpm Open Discharge
Inlet & Outlet Connections: ........................................ 1/2" N.P.T.
IMS LIME BUSTER III™ ONLY
COMPLETE with Plumbing Kit and 50 ft. of vinyl hose
Weight (crated):
#110226 ............................................ $1338.75
LIME BUSTER III™ only .................................................... 96 lbs
LIME BUSTER III™ Complete Kit ............................... 180 lbs — SUPPLIES and SPARE PARTS —
#110221 Solventol® 2409 Powdered Acid (45 lbs) .............. $220.00 ea.
#106097 ENPROX® 714 Neutralizer (3 gallons / 45 lbs) ........ 125.00 ea.
r. Techie’
M #110469 Plumbing Kit, Standard Size ........................................ 35.25 ea.
s
The general rule of thumb is 1/2 lb of #110504 1/2" I.D. Vinyl Hose ............................................................. 1.55/ft.
B4: General Mold Care
acid per gallon of water. #121711 Vial of 100 Neutral Litmus Paper Strips ....................... 4.10 ea.
Te c
h T i ps
#155320 Chemical Resistant Gloves (pair)-Neoprene ................ 8.05
#145852 Chemical Resistant Apron-Nitrile Coated ................... 30.45
Lime Buster III™ is a trademark of IMS Company #113406 Pump and Motor Assembly ......................................... 675.95
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
822 B13-4-003/2-060713 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
®
Select
MOLD WATER-PASSAGE CLEANER
TM
5 Bar Quality
Larger
Model for
QUICKLY DISSOLVES and FLUSHES AWAY
Large SCALE, RUST and CALCIUM deposits
Molds from Internal Mold Passages, Water Lines and Heat Exchangers
Easy-Pour
Wide-Mouth
Tank Fill and
Drain
BIG High-Flow
Quality
All-Swivel Casters Plastic Frame, Tank,
with Rubber Wheels Pump, Fittings and Hardware
for easy positioning ensure corrosion resistance and long life
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-004/1 823
®
TM Select
Made in the U.S.A
5 Bar Quality
Use for scheduled mold maintenance
or whenever a mold is removed for storage
Designed Why do you need an acid and a neutralizer?
• Non-acid solvents don’t dissolve mineral scale nearly as
with the well as our acid.
Inlet & Outlet Connections: ..................................... 11/2" N.P.T. #136666 .................................................... $3050
Base Dimensions: ..................................... 27" wide x 35" long — SUPPLIES and SPARE PARTS —
Height Overall: ......................................................................... 321/2" #110221 Solventol® 2409 Powdered Acid (45 lbs) .............. $220.00 ea.
Weight (crated): .................................................................. 154 lbs #106097 ENPROX® 714 Neutralizer (3 gallons / 45 lbs) ........ 125.00 ea.
#103776 Foaming Mold Water Passage Rust Inhibitor (16 oz) ... 5.75 ea.
r. Techie’ #121711 Vial of 100 Neutral Litmus Paper Strips ....................... 4.10 ea.
M
s
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
824 B13-4-004/2-031317 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TM
IMS White 2000 Mold Cleaner is a heavy duty, non-flammable, chlorinated solvent
offering excellent cleaning properties and very fast evaporation.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-005 825
TM
Made with hydrocarbon and chlorinated solvents, this product quickly and
economically cleans your molds.
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
826 B13-4-006 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Citrus Spray Mold Cleaner
Made in the U.S.A
A natural, biodegradable degreaser TM
5 Bar Quality
IMS Citrus Spray is a pure, all-natural cleaner with good solvent ability, a natural
orange scent and low toxicity. It contains no water and no detergents.
IMS Citrus-50 is a unique blend of our proven, natural citrus solvent and a
petroleum-based solvent.
3 Bar Quality
cleaners (Pure citrus cleaner prices can be affected dramatically by
bad fruit-crop conditions - particularly in Florida)
• Cleans with minimal wiping, saves labor time
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-007-062117 827
IMS SafeKlean™ Mold Cleaner
TM A natural, biodegradable degreaser Made in the U.S.A
4 Bar Quality
• Low cost
• Cleans with little or no wiping
• Leaves little residue
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
828 B13-4-008-080514 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
®
Select
SAFESEAL™ Premium Tool Steel Protectant
For SHORT or LONG TERM mold storage (12 months or more) 5 Bar Quality
TM
• Displaces moisture** NO
chlorinated
• Chemically prevents rust* Made in the U.S.A
solvents
NO
TCE
Developed for Injection Molds. Great for any metal surface.
“Dry” — does not penetrate into pins and bushings. Won’t bleed out. •
Stays soft and buttery — does not get waxy.
Easily removed by wiping or startup shots.
LOW
ODOR
Item # Quantity Unit Price
(packaged 12 cans per case) per can There’s •
e
Clear Coat3 Rust Preventive Spray
nothing els
like it! LOW
137083 (11 oz. fill) 1-71 $4.10 each
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-010 829
IMS Night Coat™ Rust Preventive and Acid Neutralizer
TM
Stops corrosion during short- OR long-term shut-downs
4 Bar Quality
quickly wets out across the mold, displacing moisture and (English & Spanish)
neutralizing acid from fingertip perspiration. Night Coat is
easily removed by start-up shots or with standard solvent Helps protect
ALSO and preserve
2) as an acid-neutralizing surface preparation the value of
your molds
for longer-term rust preventives
(A must when molding PVC or CPVC, where out-gassed hydrochloric gas Helps reduce
combines with moisture to create corrosive hydrochloric acid.) downtime
Just spray it on and wipe away any puddles. Then and mold
apply IMS Step 2, Heavy Coat or any other longer-
maintenance
term protector
costs
Item # Quantity Unit Price Helps
(packaged 12 cans per case) per can
decrease your
Night Coat Rust Preventive and Acid Neutralizer costs and
142877 (10 oz. fill) 1-71 $4.05 each inventory of
Replaces #100560
72-143 (save 5%) 3.85 each
Overnight and
mold care
144 or more (save 10%) 3.65 each #100551 Step 1 products
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
830 B13-4-011 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Heavy Coat Mold Surface Protector
Made in the U.S.A
For long-term mold storage – indoors or outdoors TM
4 Bar Quality
Replaces #111547
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-012 831
Old Purple® Mold Polish
®
Select
TM
5 Bar Quality 3rd Generation Formula — THE BEST YET Made in the U.S.A
Polishes mold
hang-up areas and An essential
reduces the need for molding shop
mold release accessory!
•
Quickly cleans NEW
Dries Faster
stubborn for easier
mold stains Cleans removal
• Tough Jobs -
Easily removes Doesn’t
burn deposits Scratch Replaces
Item Nos.
without scratching 110413
fine mold 100527
108868
finishes Old Purple™ is a registered trademark of IMS Company and 145202
Value–Priced Supplies
For general molding shop use
PERFECT for cleaning and polishing:
PRESSES
Carton Clips
TOOLS, etc
sold seperately
• Made of recycled cotton material
• Super soft • Washable
• Low lint • Mixed colors and sizes GREEN Products
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
832 B13-4-013-112514 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Advanced Mold Polishing Diamond Compounds
Made in the U.S.A
Oil Soluble Type TM
4 Bar Quality
When searching for a quality lapping and polishing compound it can be difficult to decide what to choose with so many varieties of Diamond
Compounds on the market. The IMS team of advanced Technical Specialists have taken the guess work out of it and brought you the very
best synthetic diamond compound choices to produce outstanding results.
All IMS diamond compounds provide the best polish in the least time required in polishing.
IMS diamond compounds are not only excellent for molds, but also work great for die and tool polishing, initial charging of lapping
plates and discs, polishing to final tolerance of ceramic parts, various tool-room use, and other processes that require high finish
as well as close tolerance performance.
IMS Diamond Compound Advantages:
• Monocrystalline-type structure has a strong cubo-octahedral shape with pronounced multiple cutting edges.
• Resistant to breakdown or “frying” at high temperatures. If frying does occur, the crystal is fracture controlled to produce
more cutting edges
• Extremely efficient metal bond retention.
• Oil soluble carrier indefinitely suspends diamond particles uniformly without separating, provides the fastest polishing time.
• Non-toxic, easy to use and easy to clean
• Impervious to contaminants on lapping surface
• Withstands pressure and temperature during application
• Sold in Syringe applicators to pinpoint areas to apply compound, eliminates contamination, and reduce wasteful overuse.
• Medium diamond concentrations for optimum polishing and value.
5 Gram
These oil-soluble compounds are effective on most applications; water-soluble versions are also available. 18
Larger containers are also available. Call today for more information. Gram
Optional Accessories
Head Shank Bristle Unit
Item # Description Diameter
Length Diameter Texture Price
120758 Felt Polishing Bob 1" 1" 1/4" Soft $4.40
120755 Felt Polishing Bob 3/4" 3/4" 1/8" Hard 3.65
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-014 833
IMS Paintable Ejector Pin Lube L T
TM Made for use on to knock-out pins in forward position
3 Bar Quality
IMS Paintable Ejector Pin Lube LT (low tox) is a clean, paintable, load-bearing
lubricant designed for spraying on close-fitting knockout pins. The lubricant
Made in the U.S.A
produces minimal part marking, won’t bleed out and can be used in a
-65°F to +350°F temperature range.
No
Chlorinated
Solvents
Specifications
NLGI Number: 1
Worked Penetration Range @ 77ºF: 310/340
ASTM Dropping Point: 380º F
Mineral Oil Viscosity (SUS @ 100º F): 750
(CSt @ 40º C): 135
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
834 B13-4-015 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Select
®
Item # Container Net Weight Unit Price 6-11 (4% Off) 12+ (8% Off)
107320 2 oz. jar 2 oz. (57 g) $ 4.00 each $ 3.84 each $ 3.68 each
107439 14 oz. cartridge 14 oz. (397 g) 13.75 each 13.20 each 12.65 each
105998 16 oz. jar 1 lb. (454 g) 15.00 each 14.40 each 13.80 each
107526 1-gal. pail 8 lbs. (3.63 kg) 105.00 each 100.80 each 96.60 each
107433 5-gal. pail 42 lbs. (19 kg) 500.00 each 480.00 each
#107433
Holds Fast
Won’t Run™ #107439
#107526
#105998
B4: General Mold Care
#107320
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-016-021216 835
DME OEM Replacement Coil Heaters
3 Bar Quality
TM
Flexible 39"
Cold Section Coil Lead Length
Length
Item # 90°
163902
Straight
163771 SCH0090 Straight 7/8" 3-1/8" 1/2" 39 230 525 YES 187.80
163912 SCH0091 Straight 7/8" 3-5/8" 1/2" 39 230 700 YES 261.36
163913 SCH0092 Straight 7/8" 4-1/8" 1/2" 39 230 800 YES 218.75
163914 SCH0093 Straight 7/8" 5-1/8" 1/2" 39 230 900 YES 244.00
163915 SCH0094 Straight 7/8" 6-1/8" 1/2" 39 230 1000 YES 271.85
163772 SCH0095 Straight 7/8" 7-1/8" 1/2" 39 230 1000 YES 340.40
Retainer
Cap
OEM Coil
Item # Wattage
Part # Length
146569 534975 30mm 220 $Inquire
146570 1501609 30mm 350 Inquire
146571 534976 40mm 220 Inquire
146572 1502992 40mm 350 Inquire
146573 534977 50mm 220 Inquire
146574 1045865 50mm 350 Inquire
146575 534978 60mm 220 Inquire
146576 1501594 60mm 400 Inquire
146577 534979 70mm 220 Inquire
146578 1502994 70mm 400 Inquire
Contact
146579 534980 80mm 220 Inquire
146580 1501595 80mm 400
IMS
Inquire
146581 534981 90mm 220 for current
Inquire
146582 1502995 90mm 400 Pricing
Inquire
146583 534982 100mm 220 andInquire
146584 1501596 100mm 400 Inquire
Availability
146585 534983 110mm 220 Inquire
143638 1502996 110mm 400 Inquire
146586 535470 130mm 220 Inquire
146587 1502997 130mm 400 Inquire
146588 535471 150mm 220 Inquire
146589 1502998 150mm 450 Inquire
146590 535472 170mm 220 Inquire
146591 1502999 170mm 450 Inquire
146592 535473 190mm 220 Inquire
B4: General Mold Care
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-018-022316 837
GP Cartridge Heaters
TM Suitable for most heating applications
3 Bar Quality
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
838 B13-4-019/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
GP Cartridge Heaters
(continued) TM
3 Bar Quality
1
/4" diameter IN Cartridge Heaters
For internally heated nozzles
Special Purpose 1/4" diameter Cartridge Heaters are made
expressly for nozzles. The mica-fiberglass lead sleeving
protects the swaged leads from breaking, reducing
equipment costs.
Note: Insert cartridges into nozzle holes lead end first. Always push
cartridges into nozzle, do NOT pull on leads.
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-019/2 839
TM
Heavy Duty HOIST RINGS
3 Bar Quality
Use in place of conventional eyebolts
to MAXIMIZE lifting safety
Help
prevent
Side or angular
pulling forces costly
stress damage
conventional eyebolts.
They weaken,
..and
can twist, bend injuries
or even break!
MATERIAL
• 4140 Aircraft Quality, High Strength Alloy Steel 3 & 4
with Minimum Tensile Strength of 180,000 PSI Standard and Metric Size
• Certified Heat Treatment Safety Engineered
Hoist Rings
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
840 B13-4-020/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
1 Standard Size Hoist Rings (See drawing on previous page)
Item Rated Load A B C D E F G K M TL* Unit
# (lbs.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (ft-lbs.) Price
115925 800 .65 2.29 .96 .44 .56 3.23 5
/16"-18 1.25 1.51 7 $ 51.62
115924 1000 .65 2.29 .96 .44 .56 3.23 3
/8"-16 1.25 1.45 12 51.62
115932 2500 1.00 3.50 1.50 .75 1.00 5.31 1
/2"-13 1.89 2.56 28 62.54
115931 2500 1.00 3.50 1.50 .75 1.25 5.31 1
/2"-13 1.89 2.56 28 62.54
115927 4000 1.00 3.50 1.50 .75 1.00 5.31 5
/8"-11 1.89 2.44 60 62.54
115953 4000 1.00 3.50 1.50 .75 1.25 5.31 5
/8"-11 1.89 2.44 60 62.54
115949 5000 1.00 3.50 1.50 .75 1.00 5.31 3
/4"-10 1.89 2.31 100 65.00
115943 5000 1.00 3.50 1.50 .75 1.50 5.31 3
/4"-10 1.89 2.31 100 65.00
115941 7000 1.40 5.10 2.05 1.00 1.20 7.00 3
/4"-10 2.81 3.20 100 141.46
115946 8000 1.40 5.10 2.05 1.00 1.20 7.00 /8"-9
7
2.81 3.07 160 141.46
115935 10000 1.40 5.10 2.05 1.00 1.45 7.00 1"-8 2.81 2.95 230 146.78
115963 10000 1.40 5.10 2.05 1.00 1.20 7.00 1"-8 2.81 2.95 230 146.78
115944 15000 2.00 6.75 2.87 1.25 2.63 9.22 1 /4"- 7
1
3.88 3.74 470 218.45
115940 24000 2.00 6.75 2.87 1.25 2.63 9.22 11/2"-6 3.88 3.49 800 251.64
2 Metric Size Hoist Rings (See drawing on previous page)
Item Rated Load A B C D E F G K M TL* Unit
# (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (N-m) Price
115951 400 16.5 58.2 24.4 11.1 16 82.0 M8 x 1.25 31.8 38.5 9.5 Inquire
115948 400 16.5 58.2 24.4 11.1 21 82.0 M8 x 1.25 31.8 38.5 9.5 $ 51.62
115942 450 16.5 58.2 24.4 11.1 16 82.0 M10 x 1.5 31.8 36.5 16.0 Inquire
115937 450 16.5 58.2 24.4 11.1 26 82.0 M10 x 1.5 31.8 36.5 16.0 51.62
115955 1050 25.4 88.9 38.1 19.1 25 134.9 M12 x 1.75 48.0 65.0 37.0 62.54
115950 1050 25.4 88.9 38.1 19.1 32 134.9 M12 x 1.75 48.0 65.0 37.0 62.54
115945 1900 25.4 88.9 38.1 19.1 25 134.9 M16 x 2.0 48.0 62.0 80.0 62.54
115934 1900 25.4 88.9 38.1 19.1 32 134.9 M16 x 2.0 48.0 62.0 80.0 62.54
115962 2200 25.4 88.9 38.1 19.1 25 134.9 M20 x 2.5 48.0 58.7 135.0 65.00
115957 2200 25.4 88.9 38.1 19.1 38 134.9 M20 x 2.5 48.0 58.7 135.0 65.00
115938 4200 35.6 129.5 52.1 25.4 28 177.8 M24 x 3.0 71.4 76.3 311.0 Inquire
115966 4200 35.6 129.5 52.1 25.4 38 177.8 M24 x 3.0 71.4 76.3 311.0 141.46
115961 4500 35.6 129.5 52.1 25.4 38 177.8 M30 x 3.5 71.4 70.3 311.0 Inquire
115956 4500 35.6 129.5 52.1 25.4 48 177.8 M30 x 3.5 71.4 70.3 311.0 146.78
115964 7000 50.8 171.5 72.9 31.8 67 234.2 M30 x 3.5 73.2 95.0 637.2 218.45
115959 11000 50.8 171.5 72.9 31.8 67 234.2 M36 x 4.0 73.2 88.6 1085.5 251.64
*Recommended torque load Custom Sizes Available — Inquire continued on next page
r. Techie’
M Useful Conversion Data (Approximation)
B4: General Mold Care
s
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-020/2-061316 841
3 Standard Size Safety Engineered Hoist Rings (See drawing on page 840)
IMS also carries Safety Engineered Hoist Rings with larger threads, a bigger radius and a pivot pin that goes
completely through the head. Use this larger hoist ring to safely lift heavy loads.
Item Rated Load A B C D E F G K M TL* Unit
# (lbs.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (ft-lbs.) Price
162009 550 0.43 1.84 0.71 0.375 0.54 2.67 1
/4"-20 0.75 1.33 5 $ 77.39
162010 800 0.43 1.84 0.71 0.375 0.29 2.67 5
/16"-18 0.75 1.27 7 77.39
162011 800 0.43 1.84 0.71 0.375 0.54 2.67 5
/16"-18 0.75 1.27 7 77.39
128230 1,000 0.43 1.84 0.71 0.375 0.54 2.67 3
/8"--16 0.75 1.21 12 77.39
162012 2,500 0.7 2.58 0.93 0.5 1.07 3.77 1
/2"-13 1.25 1.84 28 93.23
127381 2,500 0.88 3.52 1.22 0.75 0.78 4.78 1
/2"-13 1.5 2.31 28 92.75
162013 2,500 0.88 3.52 1.22 0.75 1.03 4.78 1
/2"-13 1.5 2.31 28 92.75
162014 2,500 0.88 3.52 1.22 0.75 1.28 4.78 1
/2"-13 1.5 2.31 28 92.75
162015 4,000 0.88 3.52 1.22 0.75 0.78 4.78 5
/8"-11 1.5 2.18 60 94.32
127388 4,000 0.88 3.52 1.22 0.75 1.03 4.78 5
/8"-11 1.5 2.18 60 94.32
162016 4,000 0.88 3.52 1.22 0.75 1.28 4.78 5
/8"-11 1.5 2.18 60 94.32
127391 5,000 0.88 3.52 1.22 0.75 1.03 4.78 3
/4"-10 1.5 2.06 100 94.32
162017 5,000 0.88 3.52 1.22 0.75 1.53 4.78 3
/4"-10 1.5 2.06 100 94.32
162018 7,000 1.4 5.14 1.71 1 1.04 6.52 3
/4"-10 2.37 3.06 100 202.63
162019 7,000 1.4 5.14 1.71 1 1.54 6.52 3
/4"-10 2.37 3.06 100 202.63
162020 8,000 1.4 5.14 1.71 1 1.04 6.52 /8"-9
7
2.37 2.93 160 202.63
162021 10,000 1.4 5.14 1.71 1 1.29 6.52 1"-8 2.37 2.81 230 203.28
127390 10,000 1.4 5.14 1.71 1 1.54 6.52 1"-8 2.37 2.81 230 203.28
162022 10,000 1.4 5.14 1.71 1 2.29 6.52 1"-8 2.37 2.81 230 203.28
162023 10,000 1.4 5.14 1.71 1 2.29 6.52 1 /8"-8 1
2.37 2.81 230 223.88
162024 15,000 1.75 6.5 2.11 1.25 1.89 8.73 11/4"-8 3.2 4.12 470 276.15
162025 24,000 2.25 8.55 2.81 1.75 2.7 12.47 1 /2"-8 1
4.2 6.41 800 441.16
127389 15,000 1.75 6.5 2.11 1.25 1.89 8.73 11/4"-7 3.2 4.12 470 321.81
128217 24,000 2.25 8.55 2.81 1.75 2.7 12.47 1 /2"-6 1
4.2 6.41 800 420.56
115958 30,000 2.25 8.55 2.81 1.75 2.96 12.47 2"-41/2 4.2 6.41 1100 495.38
4 Metric Size Safety Engineered Hoist Rings (See drawing on page 840)
Item Rated Load A B C D E F G K M TL* Unit
# (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (N-m) Price
162026 400 10.9 46.7 18 9.5 17 67.8 M8 x 1.25 19.1 32.1 9.5 $ 77.39
162027 450 10.9 46.7 18 9.5 17 67.8 M10 x 1.5 19.1 30.2 16 77.39
162028 1,050 22.4 89.4 31 19 19 121.4 M12 x1.75 38 59.4 37 92.75
162029 1,900 22.4 89.4 31 19 24 121.4 M16 x2.0 38 55.4 80 92.75
162030 2,200 22.4 89.4 31 19 30 121.4 M20 x 2.5 38 51.4 135 94.32
162031 3,000 35.6 130.5 43.4 25.4 29 165.8 M20 x 2.5 58.7 77 135 202.63
162032 4,200 35.6 130.5 43.4 25.4 34 165.8 M24 x 3.0 58.7 73 311 202.63
162033 4,500 35.6 130.5 43.4 25.4 54 165.8 M30 x 3.5 58.7 67 311 203.28
162034 7,000 44.5 165.1 53.6 31.8 46 221.7 M30 x 3.5 81.3 106.3 637.2 321.81
B4: General Mold Care
162035 11,000 57.2 217.2 71.4 44.5 69 316.7 M36 x 4.0 106.7 164.8 1085.5 420.56
162036** 12,500 57.2 217.2 71.4 44.5 79 316.7 M42 x 4.5 106.7 158.8 1085.5 495.38
162037** 13,500 57.2 217.2 71.4 44.5 79 316.7 M48 x 5.0 106.7 152.8 1085.5 495.38
162038** 22,000 76.2 296.4 104 57.2 102 428.5 M64 x 6.0 146.1 203.3 2847.5 1273.30
162039** 31,500 95.25 368.3 133.9 69.85 132 495.3 M72 x 6.0 184.15 215.39 5670 2582.68
*Recommended torque load **Includes stud and nut to safely lift heavier loads
3 Bar Quality
Te c
h T i ps Depending on your application,
IMS offers 6 plating options for different environments
(Standard) Black Oxide Cadmium Clear (Blue) Zinc
Electroless Nickel Titanium-Cadmium (Ti-Cad) Yellow Zinc Chromate
B4: General Mold Care
— INQUIRE —
®
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-021-061316 843
Forged Steel Eyebolts
TM
- NOTICE -
Load Ratings
are for vertical lifting only, (C)
with thread fully engaged (C)
•
At 45° angle, load rating (E)
drops to 25% of listed rate
• SHOULDERED
Do not use at angle
NONSHOULDERED
greater than 45°
(B) (B)
Discard immediately — SPECIFICATIONS —
if twisted, bent or
otherwise damaged. Material: C1030 Steel, Heat Treat
---Quench & Draw
For safer lifting at ANY angle Tensile: 65,000 psi Minimum
see Heavy Duty Hoist Rings
on pages 840-842 (A) Yield: 30,000 psi (A)
138068 3
/8"-16 11/4" 1" 111/16" 11/8" 1,300 4.80
142216 7
/16"-14 13/8" 11/16" 113/16" 11/4" 1,800 5.10
109787 1
/2"-13 11/2" 13/16" 21/8" 13/8" 2,400 5.20
continued on next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
844 B13-4-022/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Forged Steel Eyebolts (continued)
(A) (B) (C) (D) (E)
Thread Shank Center of Eye Straight lift Unit
Item # Eye I.D. Eye O.D.
Size Length to Shoulder Capacity (lbs.) Price
Standard Size (Shouldered)
142217 9
/16"-12 13/4" 13/8" 2 9/16" 121/32" 3,200 $ 11.50
109781 5
/8"-11 13/4" 13/8" 29/16" 121/32" 4,000 6.15
109794 3
/4"-10 2" 11/2" 213/16" 113/16" 5,000 7.90
138069 7
/8"-9 21/4" 15/8" 3 3/16" 2 1/8" 7,000 19.25
135690 1"-8 2 1/2" 13/4" 3 9/16" 2 5/16" 9,000 20.25
142218 11/8"-7 2 3/4" 2" 4" 2 11/16" 12,000 41.90
137974 11/4"-7 3" 2 3/16" 47/16" 2 15/16" 15,000 44.25
138829 11/2"-6 31/2" 21/2" 5 3/16" 3 5/16" 21,000 82.65
142219 13/4"-5 3 3/4" 2 7/8" 6" 4" 28,000 118.05
138064 2"-41/2 4" 3 1/4" 6 7/8" 4 3/8" 38,000 226.95
Metric Size (Shouldered)
mm mm mm mm mm kg
142220 M6 x 1.0 12 19 30 18.5 210 $ 7.45
142221 M7 x 1.0 14 22 36.5 23.2 370 8.25
107516 M8 x 1.25 16 25 43 27.8 500 7.90
107521 M10 x 1.5 20 27 46 30.9 740 8.00
107520 M12 x 1.75 24 30 54 34 1,030 8.10
142222 M14 x 2.0 28 35 65 40.9 1,600 10.85
106724 M16 x 2.0 32 35 65 40.9 1,600 10.40
106723 M18 x 2.5 36 38 71.5 44.7 2,140 11.55
106720 M20 x 2.5 40 41 81 52.5 2,860 17.15
106718 M24 x 3.0 48 45 90.4 57.1 3,850 21.85
142223 M27 x 3.0 48 51 103 66.5 5,200 41.35
108500 M30 x 3.5 60 55 112.7 72.7 6,400 54.90
142224 M36 x 4.0 72 63 131.8 81.8 8,970 85.95
142225 M42 x 4.5 84 73 152.4 101.6 11,960 138.85
142226 M45 x 4.5 84 73 152.4 101.6 12,720 180.65
140636 M48 x 5.0 96 82 174.6 111.0 16,400 205.00
142227 M52 x 5.0 96 82 174.6 111.0 17,300 218.30
TM
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-022/2 845
Universal LIFT RINGS
TM
3 Bar Quality
D
Stronger
Safer
More Versatile
C 2
Different Size
and Rings...
More
Economical ...Each with
than conventional A U.S. Patent No.
3 selectable
B
eyebolts #4,557,513 thread sizes
Specifications
Melting point of Copper: 1981° F
Melting point of Graphite: in air, 750° F to 1100° F
in a reduced oxygen
environment, 6700° F
103783 16-oz. jar Copper Flake Thread Lube with brushtop 13.35
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
846 B13-4-023-110614 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Hi-Strength Lifting Eye
• Maintain load ratings at lift angles of 90° TM
3 Bar Quality
• Load ratings of 9,000 lbs to 15,000 lbs
• Safety Factor 5:1
• Made of 4340 steel
REQUEST FOR QUOTE: Make a copy. Scan and email to supplies@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
SPECIFY:
1. Overall Length: ________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-024-022814 847
TM
Heavy Duty Lifting Slings
3 Bar Quality AVOID DAMAGE TO MOLDS
FROM CHAINS AND CABLES
11" 136570
eyes
NOTE
136571 Prices below are for
Lifting Slings ONLY.
Meet all
Note: For larger molds, two slings are recommended OSHA Safety
(one for each half of mold.)
Standards
IMS also carries
Forged Steel Eye Bolts
--- SEE PAGE 844-845 ---
LIFTING SLINGS
Item Number Size Unit Price
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
848 B13-4-025 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Mold Handling Latch (G.A.I.M. T.O.I.™)
®
Select
(Pronounced Game Toy) by G.A.I.M. Engineering
TM
Avoid costly damage to your molds during installation, removal, transporting or storage
Cost much less than conventional, custom strapping systems
Can be moved from one mold to another 12" Long
Made of 100% Recycled Reinforced Nylon
Keeps
NOTE:
Hoist Rings or STATIONARY
Mold Halves
shoulder type MOLD HALF GREEN Products Together for
eye bolts SAFE
MUST be Fixed-Piece
used Eyebolt
9" Long Handling
with T.O.I. /4"
3
Clearance
Hole — HOW IT WORKS —
MOVABLE The T.O.I.™ (Tool Opening Interrupter) holds the mold 9" LONG
MOLD HALF closed for transporting, setup, teardown or storage.
Cutting Guide The T.O.I.™ consists of two pieces: a fixed piece that
Item #109330
5
/8" Clearance Hole
(not visible here)
bolts to the stationary mold half, and a slide that
moves within a track on the fixed piece. The slide
bolts to the movable mold half. As the mold is lifted,
$6.95
the slide wedges tightly to the fixed piece, preventing
Slide
Fixed
Piece the mold from opening. 12" LONG
Slide
To prevent damage to the tooling and machine, if the
Eyebolt
installer forgets to remove the T.O.I.™ after installing
Item #109327
G.A.I.M. T.O.I.™ is a trademark of G.A.I.M. Engineering Inc.
can be folded
and stored A QUICK, EASY way to:
under cap
Indicate a mold’s status — READY TO MOLD / NEEDS WORK / P.M. REQ’D
Value–Priced Supplies
Attach work-orders, notes etc. to mold (under cap)
Help eliminate unnecessary downtime and confusion!
#137145 (Green: READY TO MOLD) ................................................................... $2.15 ea.
#137146 (Red: NEEDS WORK) .................................................................................. 2.15 ea.
Fits standard
#137147 (Yellow: P.M. REQ’D) ..................................................................................... 2.15 ea.
sprue bushing
retainers
SAFETY BONES™
BETTER and LESS EXPENSIVE than mold safety straps
Designed to fracture (not damage mold)
if mold is opened with straps still in place
Cost a fraction of what you pay for metal straps
Highly visible “safety yellow” color will not wear off or fade
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-026 849
TM
“SOFT” HAMMERS
3 Bar Quality
Make mold setup and maintenance QUICKER — SAFER
ELIMINATE Scratching and Denting — Non-Sparking
BRASS
Hickory
Handle
SOFTER
TM
THAN BRASS
Made of
Alloy 43 Aluminum
ALUMINUM
1
/2 lb
Value–Priced Supplies
3
/4 lb
(91/4"
(8"
long)
LOW COST...
1 lb long) MUCH, MUCH LESS than
(103/8"
long) comparable brass hammers
11/2 lbs
(111/2"
long) Item # Weight Prices
2 lbs
(13" 101010 1
/2 lb. $ 6.25
long)
101125 3
/4 lb. 6.75
3 lbs 101070 1 lb. 8.00
(131/2" Dimpled 101042 1 /2 lb.
1
10.50
B4: General Mold Care
long)
Handles 100978 2 lb. 13.75
100946 3 lb. 20.25
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
850 B13-4-027-072613 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Injection Mold DIE BARS TM
3 Bar Quality
NEW 16" Long (Model F)
Now 6 5
with Prying Head and pointed end
/8" Hex across flats • Weight 1.7 lbs ea.
Item No. 138501
HARD-TO-FIND
$13.85
Models 18" Long (Model A)
with Rolling Head and pointed end
Model E 5
/8" Hex across flats • Weight 1.1 lbs ea.
#103953
Made of Item No. 103941
30"
long
Model C
#103970
TOUGH
FORGED
$10.35
231/4" STEEL 21" Long (Model B)
long
Model B
in the U.S.A. with SMALL Radius Head
5
/8" Hex across flats • Weight 1.15 lbs ea.
#103975
21" Item No. 103975
long
Model A
#103941
$19.15
N O TE :
18" Model F
C a lled Mold
231/4" Long, Heavy Duty (Model C)
long #138501 with MEDIUM Radius Head
Pry Bars or Die
161/4" Setter Bars in /8" Hex across flats • Weight 2.4 lbs ea.
5
Prying
Head
$11.75
30" Long, Super Heavy Duty (Model E)
Rolling with EXTRA LARGE Radius Head
Head /4" Hex across flats • Weight 4.3 lbs ea.
3
Extra Large
Radius Head
Medium
Radius Head
Small
Radius Head
$20.35
Model D SAMPLE DIE BAR KIT
Large #103966 INCLUDES: ONE of each plus a free tip
Radius
18" long
B4: General Mold Care
#108831
- OPTIONAL -
Bronze Tips (Does not fit #103953)
(30-32 Rockwell)
............................. $13.95 ea.
$89.90
(Regularly: $99.85 - YOU SAVE $12.25)
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order
fax order
toll-free
toll-free
(USA(USA
& Canada)
& Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900
1.888.288.6900001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-028-051616 851
®
TM
5 Bar Quality
Workspace Table
— SPECIFICATIONS —
Tray Sizes:
UPPER (3): ............... 14" wide x 30" long x 2" deep
Workspace Table: .... 14" wide x 30" long x 2" deep
LOWER: ................. 30" wide x 30" long x 21/2" deep
Dimensions: ............................. 30" W x 30" L x 64" H
Cart Structure: ................................... 11 gauge steel
Weight Capacity: ........................................... 350 lbs
Shipping Weight (must ship truck): .............. 150 lbs
5" diameter
$1,299
Soft Rubber Casters
(Swivel / Locking) Heavy Duty, Another IMS Exclusive Product!
Welded Steel Construction (Other Items Sold Separately)
B4: General Mold Care
r. Techie’
M
s
Have a mobile mold setup cart with every tool, hose, and clamp necessary that is brought to the machine.
This avoids hunting for stuff and wasting time.
Te c
h Ti p s
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
852 B13-4-029-042817 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TM
Low
Cost Versatile WORKLIGHT
For more light WHEN and WHERE you need it! Value–Priced Supplies
Reflector Head
made of spun
aluminum
UL Approved
Wiring
for
High Quality Uses 120/60/1
Light Socket standard
60 Watt Bulb
operation
ON/OFF Switch
(maximum)
6' Power Cord (not included) Includes
with Polarized Plug Optional
Hanging Hook
Ideal for:
• Machine Repair
• Work Stations Tough
• Tool Room Polypropylene
• Wherever Extension Arm with
temporary* Unique 3 Adjustment Points
spot illumination 360° Swivel provides flexible mounting
is required adjusts light AND compact storage
(12" high when fully extended)
*NOT intended for
without
use as a permanent moving base Attachable Legs
light source.
for free standing
Strong 23/4" dia. Magnetic Base
holds lamp securely in ANY position
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-030-022216 853
TM
Magnetic
4 Bar Quality
Perfect for on-the-press mold illumination!
Convenient
Hook AVOID COSTLY DAMAGE
TO YOUR MOLDS...
s S ake...
For Saf
e t y ’ ...USE A MOLD-LITE™
r o p e r ators
s you
...Help h a t they Magnetic Bases
See w position light anywhere
ng!
are doi
E! Cool, Bright
TA B L
t’s POR
Fluorescent Bulb
I
Many Uses Shatter Resistant
in your Molding Shop Bulb Protector
Additional
- SPECIFICATIONS -
Overall Length: ........... 26" Watts: .................................. 15
Cord Magnet
Diameter: .................... 21/8" Approx. Initial Lumens: .. 870 for extra safety
- UNIT PRICE -
Magnetic
Item No. 108329
Includes: MOLD-LITE™ Fixture, Bulb, 25' Grounded Power
Cord with Plug-In Ballast and 3 Magnetic Mounts.
Shipped fully assembled.
Plug-In
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
854 B13-4-031 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Loctite® Pastes and Liquids
Keep fasteners and pipe joints tight!
TM
3 Bar Quality
Pipe Sealant
• Seals up to 100psi
• Will not contaminate or clog lines
• Eases disassembly
Loctite #561 ®
THREADLOCKER
• For up to 1" (25mm) fasteners
Loctite #271 ®
SUPERBONDER®
Instant Adhesive
• Great for rubber, metal and plastics
Loctite #495 ® • Fixes gaps to .004''
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-032-121714 855
FC Forged, Closed-Toe
Mold Clamps
Closed toe for maximum holding strength
IMS #101140
Heavy Duty
Hold Down
Bolt
IMS #104124
Look for Heavy Duty
Washer
“MAXX”
if you want Only
the very from
BEST! IMS!
IMS #104122
FC9 Forged,
Closed-Toe
Mold Clamp
r. Techie’
M
B4: General Mold Care
For basic applications use mold clamps that have a slot to accept the bolt.
They never fall off the bolt.
Te c
h Ti p s
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
856 B13-4-033-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS FC3 Mold Clamps, Washers and Bolts
41/16"
TM
4 Bar Quality
5/8"-11 thread
15/8"
3
/4 " 29/32"
11/4"
21/32" wide slot
1"
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-034-082914 857
IMS FC4 Mold Clamps, Washers and Bolts
TM
4 Bar Quality
3
/4"-10
thread 51/4"
15/8"
2" 3
/4" 29
/32"
11/2" 25
/32" wide slot
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
858 B13-4-035-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS FC5 Mold Clamps, Washers and Bolts
TM
4 Bar Quality
3
/4"-10
thread 51/2"
15/8"
2"
3
/4" 29
/32 "
1 /2"
1 25
/32" wide slot
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-036-082914 859
IMS FC6 Mold Clamps, Washers and Bolts
TM
4 Bar Quality
3
/4"-10 61/2"
thread
15/8"
2" 3
/4" 29
/32 "
11/2" 25
/32" wide slot
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
860 B13-4-037-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS FC7 Mold Clamps, Washers and Bolts
TM
4 Bar Quality
/4"-10
3
7"
thread
15/8"
21/2"
/4"
3 29
/32 "
11/2" 25
/32 " wide slot
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-038-082914 861
IMS FC8 Mold Clamps, Washers and Bolts
TM
4 Bar Quality
3
/4"-10 7"
thread
15/8"
2"
3
/4" 29
/32 "
11/2" 11/16" wide slot
r. Techie’
M AVOID
AVOID “ALL-PURPOSE”
“ALL-PURPOSE” BOLTS BOLTS AND AND WASHERS.
WASHERS. The The most
most costly
costly mistake
mistake you
you can
can make,
make, is
is to
to use
use
s
a bolt
a bolt that
that is
is too
too short
short and
and strip
strip the
the threads
threads inin a
a platen
platen hole.
hole. Check
Check clamp
clamp bolt
bolt engagement.
engagement. It It
should enter
enter die
the plate
die plate at least 1/4 (preferably 1/2) times the bolt diameter. Commercial bolts,
should at least 11/4 1(preferably 11/2)1times the bolt diameter. Commercial bolts,
Te c p s
socket head screws and soft steel washers require frequent,
socket head screws and soft steel washers require frequent, costly costly replacement,
replacement, asas bolt
bolt heads
heads are
are too
too
h T i small and
small and conventional
conventional washers
washers bend
bend when
when used
used onon injection
injection molds.
molds. You
You can
can avoid
avoid damage
damage toto your
your
mold, cut
mold, cut your
your setup
setup time
time and
and save
save money
money wasted
wasted on
on makeshifts
makeshifts byby using
using bolts
bolts and
and washers
washers made
made
expressly for injection plants.
expressly for injection plants.
B4: General Mold Care
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
862 B13-4-039-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS FC9 Mold Clamps, Washers and Bolts
TM
2"
31/4"
11/4"
3
/4"
2" 15/16" wide slot
r. Techie’
M
s
KEEP ADJUSTABLE CLAMPS PARALLEL TO PLATEN. Failure to keep clamp exactly level will result in
clamp loosening. Furthermore, it minimizes clamp to mold contact which is a safety risk.
Te c
h T i ps
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-040-082914 863
FO Forged, Open-Toe
Mold Clamps
Open-Toe for maximum positioning flexibility
Custom Clamps
IMS #103821
Heavy Duty Not A Problem for IMS!
Hold Down IMS #103836
Bolt Forged
No-Turn IMS #103831
Washer Heavy Duty
Adjusting
Bolt
Only
from
IMS! IMS #103859
FO7 Forged,
Open-Toe
Mold Clamp
r. Techie’
M
B4: General Mold Care
Take great care when handling open-ended clamps. They may slip and fall to the
floor or down the chute when the tech is trying to bolt it in.
Te c
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
864 B13-4-041-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS FO5 Mold Clamps, Washers and Bolts
TM
/4"-10
3
5" 4 Bar Quality
thread
15/8"
2"
/4"
3 29
/32 "
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-042-042216 865
IMS FO7 Mold Clamps, Washers and Bolts
TM 3
/4"-10
4 Bar Quality 7"
thread
15/8"
2"
3
/4" 29
/32 "
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
866 B13-4-043-082914 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Machined Mold Clamps
TM
3 Bar Quality
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-044040715 867
IMS Mold Clamp Bolts
TM Specially designed for mold clamp use Made in the U.S.A
4 Bar Quality
• Made from durable forged 4140 tool steel • Heat treated for maximum tensile strength
• Oversized hex head maximizes holding power
• Extra large fillet under bolt heads
ADJUSTING
BOLTS
Item # Unit Price Item # Unit Price Item # Unit Price Item # Unit Price Item # Unit Price
(each) (each) (each) (each) (each)
103831 $8.70 103833 $8.00 104123 $12.50 103828 $10.75 103826 $10.35
M
s
Check out www.imscompany.com for articles on proper bolt length and installation.
Te c
h T i ps
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
868 B13-4-045 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS Mold Clamp Bolts
Made in the U.S.A
(continued) TM
4 Bar Quality
Item # Unit Price Item # Unit Price Item # Unit Price Item # Unit Price
(each) (each) (each) (each)
Item # Unit Price Item # Unit Price Item # Unit Price Item # Unit Price
(each) (each) (each) (each)
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-046 869
TM
Item # Thread Size Length Thread Length Hex Head Shank Dia. Unit Price
Standard Size
103902 1
/2"-13 2 1/2" 11/4" /4"
3
/2"
1
$ 0.75
103890 1
/2"-13 3 1/2" 11/4" /4"
3
/2"
1
0.45
103862 5
/8"-11 3" 15/8" 15
/16" 5
/8" 0.90
103847 5
/8"-11 31/2" 15/8" 15
/16" 5
/8" 1.25
103925 5
/8"-11 4" 11/2" 15
/16" 5
/8" 1.30
103912 5
/8"-11 41/2" 11/2" 15
/16" 5
/8" 1.50
103900 5
/8"-11 5" 11/2" 15
/16" 5
/8" 1.75
142306 5
/8"-11 6" 15/8" 3
/4" 5
/8" Inquire
103888 3
/4"-10 31/2" 17/8" 11/8" 3
/4" 1.30
106340 3
/4"-10 2 1/4" 13/4" 1
/2" 1
/2" 0.80
103874 3
/4"-10 4" 17/8" 11/8" 3
/4" 1.50
103858 3
/4"-10 41/2" 17/8" 11/8" 3
/4" 1.75
103844 3
/4"-10 5" 17/8" 11/8" 3
/4" 2.10
103922 1"-8 4" 21/4" 11/2" 1" 2.60
103909 1"-8 41/2" 21/4" 11/2" 1" 2.60
103897 1"-8 5" 21/4" 11/2" 1" 4.00
131306 1"-8 6" 21/4" 11/2" 1" 5.00
Metric Size
103855 M-12 x 1.75 23/8" 13/16" 19 mm 1
/2" $ 0.55
103841 M-12 x 1.75 31/2" 13/16" 19 mm 1
/2" 0.75
103905 M-14 x 2.0 23/8" 111/32" 22 mm 9
/16" 0.90
103919 M-14 x 2.0 43/8" 111/32" 22 mm 9
/16" Inquire
103881 M-16 x 2.0 31/2" 11/2" 24 mm 5
/8" 1.50
103893 M-16 x 2.0 43/8" 11/2" 24 mm 5
/8" 1.50
103852 M-20 x 2.5 2 1/2" 113/16" 30 mm 3
/4" 2.25
103867 M-20 x 2.5 4" 113/16" 30 mm 3
/4" 2.45
B4: General Mold Care
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
870 B13-4-047-072613 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
T-Slot Head Style High Strength Bolts
TM
Made in the U.S.A
3 Bar Quality
• AISI 1045
• Black oxide finish
• Unified coarse threads
• Heads sized to fit in table slot giving more
bearing surface
Item # Thread Size Length Thread Length Head Dia. Shank Dia. Hex Nut Unit Price
147164 5/8"-11 4" 1-1/2" 1-1/64" x 1-1/8" 5/8" 159980 $4.98
159972 5/8"-11 5" 1-1/2" 1-1/64" x 1-1/8" 5/8" 159980 5.50
148608 5/8"-11 6" 2" 1-1/64" x 1-1/8" 5/8" 159980 5.79
159973 5/8"-11 8" 3" 1-1/64" x 1-1/8" 5/8" 159980 6.68
159974 3/4"-10 4" 1-1/2" 1-1/4" x 1-3/8" 3/4" 159981 6.88
137697 3/4"-10 5" 1-1/2" 1-1/4" x 1-3/8" 3/4" 159981 7.51
140372 3/4"-10 6" 2" 1-1/4" x 1-3/8" 3/4" 159981 8.11
159975 3/4"-10 8" 3" 1-1/4" x 1-3/8" 3/4" 159981 9.36
159976 1"-8 4" 2" 1-21/32" x 1-7/8" 1" 150359 12.57
159977 1"-8 5" 2" 1-21/32" x 1-7/8" 1" 150359 14.01
137603 1"-8 6" 2" 1-21/32" x 1-7/8" 1" 150359 15.46
150358 1"-8 8" 3" 1-21/32" x 1-7/8" 1" 150359 18.39
D
A
Optional Accessory
B4: General Mold Care
T-Slot Cleaner
Eliminates the danger of removing chips with air or by hand
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-048-112613 871
IMS Mold Clamp Washers
TM Specially designed for mold clamp use Made in the U.S.A
4 Bar Quality
• Extra thick hardened steel to prevent deformation NOTE: IMS Hardened Steel Injection Mold Clamp Washers
under a heavy load are 2 to 3 times thicker than ordinary washers; select bolts to
make sure length of thread engagement is 1 to 11/2 times the
• Black oxide, noncorrosive surface
bolt diameter. Washers made expressly for heavy duty mold
clamping will outlast commercial types many times and cost
Only from IMS! you much less in the long run.
Item # Unit Price Item # Unit Price Item # Unit Price Item # Unit Price
(each) (each) (each) (each)
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
872 B13-4-049-011215 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Washers and Nuts #144181
#136374 TM
Combination Wrenches
Heat treated chrome vanadium alloy steel
Fits Fits
Purchasers also order: 7/8" Hex 11/16" Hex
• Low Cost Mold Clamp Bolts, page 72
Item # Fits Hex Size Nominal OAL Box Weight Unit Price
109151 7
/8" 11" 12 point 9 oz. $10.25
122201 11/16" 14" 12 point 11 oz. 14.80
149120 1 /4"1
16" 12 point 1.6 lbs 20.55
109150 15/8" 23" 12 point 3 lbs. 39.25
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-050-100913 873
1” DRIVE DIAL, 0 to 1,000 ft/lbs TORQUE WRENCH
TM with Electric Light Signal Dial
3 Bar Quality
This torque wrench is made from alloy steel;
square drives are drop forged and carefully heat treated.
An innovative linear ball bearing system eliminates friction between
the spring and case for greater accuracy and repeatability
Accuracy of +/- 4% of indicated value
(20-100% of full range)
Provides precise readings in both clockwise
and counterclockwise operation
Electric Light Signal
Signal pointer can be set to a desired torque.
PLUS
When pointer needle reaches the preset torque • One 31” Extension
value, the light is illuminated and a buzzer sounds • One 32” Extension
Over-size Dial
Permits easier reading, even from an angle
Dual Scale Dial 215/16"
Quick, easy torque readings in either English
or Metric values. Heavy duty guards help protect
dial from damage
Length (with extensions): 74.37 in
SPECIFICATIONS Weight (with extensions): 20.80 lbs
• Primary Scale Range: 0 - 1,000 ft/lbs
• Primary Scale Increments: 25 ft/lbs Item No. 138286
• Secondary Scale Range: 0 – 1,400 Nm COMPLETE with metal storage case
• Secondary Scale Increments: 25 Nm
and both handle extensions
The “LOCATOR™”, with its unique micro-cellular structure, is forgiving. The sound
of the thermoplastic ring cracking can alert setters to a misaligned mold BEFORE
any damage is done to either the mold or the platens.
(Slightly undersize
2.000
• Reduce mold setup and tear down costs Maximum
Use Temperature
• Form-fits to worn platens 380° F
• Leaking plastic from nozzle & sprue bushing
easily peels right off ---- won’t stick Patent Pending
3.990
Designed & made GREEN Products
.250
by a molder .735 Made from 100%
.485
FOR molders Recycled Material!
874 B13-4-051 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Loop Handle Hex Key Set Ball-End Hex Key Set
• Tip Sizes: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", • Standard Tip Sizes: 1/20", 1/2", 1/16", 5/64" TM
1/4", 5/16" and 3/8" 3/32", 7/64", 1/8" and 9/64" 3 Bar Quality
• All hex keys are precision formed to exact tolerances • Metric Tip Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10
for precise fit • Overall Length:
• FED SPEC. GGG-K-275 AMED 1 and meets (Standard) 2-29/32"
ASME/ANSI B18.3 min and 6" max
• Material: Alloy steel with black oxide finish (Metric) 3-3/32" min
and 5-1/4" max
• Resists rotational
distortion • Unique locking
feature and marked
• Includes
slot for each key
pouch
• Material: Alloy steel
• Includes plastic caddy
5-Piece Long Folding Hex Key Set 6-Piece Long Folding Hex Key Set
• Tip Sizes: 3/16", 7/32", 1/4", 5/16" and 3/8" • Tip Sizes: 3mm, 4mm, 5mm, 6mm, 8mm
• Overall Length: 2-7/16" min and 3-1/4" max and 10mm
• Finish: Black
oxide with
chrome
plated
handle
Standard Metric
162710 Long Folding Hex Key Set $15.00 162711 Long Folding Hex Key Set $15.00
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-052 875
IMS Soft Steel Hole Savers
TM For easy repair of stripped platen holes Made in the U.S.A
3 Bar Quality
113067 7
/8" 1
/2" 35.50 113066 1"-8 48.40
113063 13/32" 1
/2" 82.30 113061 11/4"-7 98.70
113058 113/32" 1
/2" 133.92 113055 11/2"-12 124.75
163375 15/8" 3
/4" 138.00 137884 1 3/4"-8 175.00
* Drill torque is 245 ft./lb.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
876 B13-4-053-052015 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
r. Techie’
M
s
Te c
h T i ps
Examine each list. 20-45 minutes of your changeover time can be done before you shut
down the machine.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-054 877
TM
FASTIE® Quick Ejector Tie-In System Made in the U.S.A
4 Bar Quality
In an injection molding press, the FASTIE system quickly “ties-in” opens to release the stud, disconnecting the press and tooling
the mold ejector plate to the press ejection system, dramatically ejector plates. The coupler remains in the open position, ready for
reducing mold change time. The greatest time savings are realized a new mold to be set.
in presses where space is limited and the ejector system is difficult For multiple ejector locations, an air manifold is recommended to
to tie in using solid knock-out bars. release all couplers simultaneously. See inside catalog pages for
The FASTIE coupler may be permanently mounted to the press installation examples.
ejector plate. The quick-connect locking mechanism in the coupler Three FASTIE models are available: 1-inch original model for
snaps mechanically onto the mold-mounted stud during mold presses 500 tons and under, 1-inch High Strength FASTIE for
installation. center knock-out and high speed ejection, and 2-inch model for
To release the ejectors, apply shop air to the coupler. The coupler presses larger than 500 tons.
When coupler and stud are connected, the High Strength FASTIE
assembled length is .10” (2.5mm) longer than the original version.
The outside diameters are the same.
High Strength Couplers and Studs must NOT be used with the
original FASTIE. Slight dimensional differences will cause
High Strength FASTIE works the same as the original FASTIE. The malfunction if the versions are mixed in an installation.
difference is in the load-bearing surface area inside the coupler. Standard Ejector Bars, Center Adapters and Air Manifolds may
Instead of six ball bearings to hold the FASTIE stud, there are three be used with the High Strength FASTIEs.
locking lugs to distribute the load more evenly. See below. Contact
area is increased dramatically.
High Strength FASTIE Length Comparison
High Strength FASTIE End View
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
878 B13-4-055-090214 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
FASTIE® Quick Ejector Tie-In System TM
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-056-020416 879
TM
FASTIE® Quick Ejector Tie-In System Made in the U.S.A
4 Bar Quality
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
880 B13-4-057-020416 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Made in the U.S.A
FASTIE® Accessories TM
4 Bar Quality
Fixed Length Ejector Bar • Fixed Length Ejector Bar also provides an air passage
through to the back of the press ejector plate. Several
lengths are stocked with one blank end for on-site finishing.
1.00"
25.4mm Fixed Length Ejector Bar (1/2"-13 threads)
Item # Model # Length Unit Price
147526 FTBB-50-8 8" $108.00
147527 FTBB-50-10 10" 112.00
For use with 1" Series ONLY 147528 FTBB-50-12 12" 118.00
Ejector Bars for 2” FASTIE are special orders – INQUIRE 147529 FTBB-50-14 14" 122.00
—•—
See next page to “Determine Ejector Bar Length” • SPEEDBAR Adjustable Length Ejector Bar*
SPEEDBAR Adjustable Length Ejector Bar Adjustment sleeve is rotated without tools to shorten or
lengthen the bar up to 1/2" in increments of .006". Once
the desired length is set, the spring-loaded sleeve
securely locks the adjustment. Provides air passage
1.00" through the bar for air hook-up at the back of the press
25.4mm
ejector plate.
* 1-inch, 1/2-13 threaded only
U.S. Patent No. 6,315,544
SPEEDBAR Adjustable Ejector Bar (1/2"-13 threads)
Ask about Item # Model # Length Unit Price
Special Thread Sizes 143522 SBAB-50-6 5.5" to 6.5" $223.00
143523 SBAB-50-7 6.5" to 7.5" 233.00
for
143524 SBAB-50-8 7.5" to 8.5" 244.00
Ejector Bars 143525 SBAB-50-9 8.5" to 9.5" 254.00
and 143526 SBAB-50-10 9.5" to 10.5" 261.00
Center Adapters 143527 SBAB-50-11 10.5" to 11.5" 271.00
143528 SBAB-50-12 11.5" to 12.5" 282.00
2.4" 143529 SBAB-50-13 12.5" to 13.5" 290.00
60.9mm 143530 SBAB-50-14 13.5" to 14.5" 297.00
.50"
1.50" 12.7mm —•—
38.1mm 1" Center Adapter
for 1" Series
1" Center Adapter
Item # Model # Thread Size Unit Price
143645 FTCA-63 5/8"-11 male $58.00
147532 FTCA-M16 M16 x 2 male 66.00
0.63" 147542 FTCA-M20 M20 x 2.5 male 98.00
.50" 15.9mm
1.50"
12.7mm 1-3/8" Center Adapter
1-3/8" Center Adapter 38.1mm Item # Model # Thread Size Unit Price
for 1-3/8" Series 161397 FTCA1.4-63 5/8"-11 male $210.00
161404 FTCA1.4-75 3/4"-10 male 82.00
161405 FTCA1.4-M16 M16 x 2 male 116.00
161406 FTCA1.4-M20 M20 x 2.5 male 116.00
.63"
2" Center Adapter
2" Center Adapter 15.9mm Item # Model # Thread Size Unit Price
REF.
for 2" Series 147533 FTCA2-75 3/4"-10 male $ 97.00
1.50" .50"
38.1mm 12.7mm 147534 FTCA2-M16 M16 x 2 male 140.00
143538 FTCA2-M20 M20 x 2.5 male 140.00
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-058/1 881
TM
FASTIE® Accessories
4 Bar Quality (continued)
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
882 B13-4-058/2 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Determine Ejector Bar Length
• Determine length of Solid Ejector Bar Connected FASTIE Lengths
• Select Connected FASTIE Length from table
Description Part Numbers “X" Length
• Subtract Connected FASTIE Length from
Original 1" FASTIE FTF-xx and FTM-xx 3.062"/77.8mm
Solid Ejector Bar Length
High Strength FTFHS-xx and
• Subtract Center Adapter Length if needed 3.162"/80.3mm
1" FASTIE FTMHS-xx
• Result is FASTIE Ejector Bar Length 2" FASTIE FTF2-xx and FTM2-xx 5.875"/149.2mm
SPEEDBAR® is an adjustable length knock-out bar that can quickly compensate • Faster Mold Changes
for variations in different molds. Used with the FASTIE system, mold ejector • Various Thread Sizes Available
plate tie-in and adjustment times are reduced to seconds. The adjustment
sleeve is easily rotated to change the bar length up to 1-inch in increments • Flexible Modular Installation
of .006". Once the desired length is set, the spring-loaded sleeve securely • No Mold Modifications Required
locks in your adjustment.
• Reduced Wear, parts stay connected
Fixed length knock-out bars are blank on one end for on-site finishing.
during molding cycles
Longer bars are available.
• Hardened Steel Materials
B4: General Mold Care
SPEEDBAR is a registered trademark of Burger & Brown Engineering, Inc. Continued on next page
®
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-059 883
FASTIE® Installation Examples
Typical Application for 2 or 4 Ejector Positions
Couplers are located at
This setup is designed for captive molders, or shops Parts List
with tools using a standard thickness ejector housing. the end of the ejector bars qty. Part
mounted to the press
ejector plate. 2 or 4 FASTIE Stud
Studs are mounted to each 2 or 4 FASTIE Coupler
mold in storage. Ejector 2 or 4 Fixed Length Ejector
connection is made without Bars or SPEEDBAR®
changing ejector bars. Adjustable Length Bars
Ejector housing shown 1 Air Manifold with tubing
is 1.062" thick.
Air Manifold supplies
compressed air to the end
of each ejector bar for
simultaneous coupler
release. Fixed length bars
are finished on site, cut to
length and tapped with
1/2-13 female thread. Fixed Length
Ejector Bar
SMARTFLOW and FASTIE are registered trademarks of Burger & Brown Engineering, Inc.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
884 B13-4-060/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
FASTIE® Installation Examples
Alternate Application for 2 or 4 Ejector Positions
Couplers are installed next
This setup is used where there is limited access to Parts List
the back of the Press Ejector Plate. Custom molders to the Press Ejector Plate. qty. Part
using smaller presses will benefit from this Studs are placed at the end
application. of the mold-mounted ejector 2 or 4 FASTIE Stud
bars for easy removal. 2 or 4 FASTIE Coupler
Molds are changed quickly 2 or 4 Center Adapters
without accessing the back
2 or 4 Fixed Length Ejector
of the Press Ejector Plate.
Bars or SPEEDBAR®
For example, a press with Adjustable Length Bars
4 ejector positions may be
1 Air Manifold with tubing
running molds using only
the horizontal positions, but
the next mold may need the
2vertical ejector positions.
Ejector housing shown is
1.062" thick.
Air Manifold supplies air to
the mold side of the Press Center Adapter
Ejector Plate with the use of
adapters.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-060/2 885
REQUEST FOR QUOTE: Make a copy. Scan and email to supplies@imscompany.com or Fax: 1 888 288 6900 (Form online at www.imscompany.com)
MAXIMUM
Use Temperature: Contract and expand with mold stroke
to provide continuous protection
240° F
The sleeves wrap around tie bars, using a zipper, Velcro®
and magnetic mounting kit for quick and easy installation.
*
c
b a
*1 / " clearance required between mold and tie bar.
1
2 Mold closed min. Mold opened max.
platen to platen platen to platen
SPECIFY:
a. Mold Open: _________________________________________________
max open length = 3X closed length
b. Mold Closed: ________________________________________________ (max ratio = 3:1)
Date: ____________ Quantity: _______ Phone: ( _______ ) ____________________ Fax: ( _______ ) ___________________
Address: ___________________________________________________________________________________________________
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
886 B13-4-061-070813 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Brass Mold Hole Cleaning Brushes
TM
Use these brass bristle brushes to effectively remove scale, rust, and plastic residue within small-bore
Made in the U.S.A
3 Bar Quality
metal tubing and drilled orifices. They eliminate need for corrosive liquid cleaners and are available in a
variety of sizes. Brass bristle brushes are perfect for reaching into areas such as condenser tubes, cartridge heater holes, ejector pin
holes, mold cavity holes and mold coolant passages.
• Sturdy, twisted wire handles • Smooth, double stranded, heavy gauge wire for easy gripping
• Finger loops for comfortable grip • Stronger shaft for use in power drills and drill presses
• Easily apply reaming pressure to clean tubes • Five brush diameters available
• 16 brush diameters available • Available in kit form
• Available in kit form Condenser Cleaning Brushes
Power-Driven (Single Spiral) Brushes
• Stiffer brass bristles for maximum cleaning power
• Closely packed brass bristles • Five brush diameters available
• Effective mounted in power drill • Extensions and T-handle available
• Five brush diameters available • Available in kit form
• Available in kit form • 5/16"-18 female thread x 1/8" NPT male thread
100984 1
/2" 41/2" 71/2" 6.40 101095 Extension (5/16"-18 thread 36" length) 7.00
100952 5
/8" 41/2" 71/2" 6.40 101064 T-handle only 2.45
101130 3
/4" 41/2" 71/2" 6.40
101306 1" 41/2" 71/2" 6.40
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-062-051616 887
TM
RPM: up to 20,000
100933 11/4" dia. $17.65
101111 11/2" dia. 20.05
101080 2 /4" dia.
3
31.00
101052 3" dia. 31.35
Brass Solid End Brushes
Spindle: /4" dia.
1
RPM: 20,000
100957 1
/2" dia. $7.20
101136 3
/4" dia. 9.55
101311 1" dia. 13.75
Heavy Duty Brass Wheel
(use with bench mounted grinder)
RPM: 6,000
101065 6" dia.; 5/8" arbor hole $58.95
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
888 B13-4-063 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TM
Industrial Plug
1/4"
Collet
Rear exhaust directs air away
from the work surface
1/8"
$20
Working Pressure: 90 psi
Overall Dimensions:
Overall Weight:
7" long x 15/8" dia.
1.2 lbs. .00
Price
includes IN STOCK — Order NOW!
plastic
storage -
carrying See next page for
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-064-051017 889
TM
Industrial Plug
Specifications
$27 .50
Speed: 25,000 rpm
Collet Size: 1
/4" and 1/8"
Air Inlet Size: 1
/4" N.P.T.
Working Pressure: 90 psi max
Overall Dimensions: 61/4" long x 15/8" dia.
Overall Weight: 1 lb. IN STOCK — Order NOW!
Optional Accessories for use on Grinder Nos. 134156 and 166174
3" Cut-Off Wheel for metal (3" dia. x 1/16" thick)
40 grit aluminum oxide / 3/8" arbor / 20,000 rpm MAX
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
890 B13-4-065-051017 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Moldmaker Finishing Stones
Great for quick, easy mold surface enhancements
TM
Made in the U.S.A
3 Bar Quality
Specifications
Grit: 220
Overall Dimensions: 6" long x 1/2" x 1/2"
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-066 891
Other Moldmaker Accessories Available
For Your Everyday Mold Making and Maintenance Needs
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
892 B13-4-067/1 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Other Moldmaker Accessories Available
For Your Everyday Mold Making and Maintenance Needs
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-067/2 893
r. Techie’
M
CONVERTING FRACTIONAL INCHES
s
Te c
h T i ps
TO DECIMALS AND MILLIMETERS
Fraction Decimal MM Fraction Decimal MM
894 B13-4-068 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Date Code Insert
TM
Made in the U.S.A
3 Bar Quality
DAB-16 16mm (0.6300") 0.3930" 0.5510" 100.00 97.00 95.00 93.00 45.00
DAB-20 20mm (0.7847") 0.5197" 0.6300" 104.00 101.00 99.00 97.00 49.00
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-069 895
TM
VERSASWITCH™ Limit Switch Made in the U.S.A
4 Bar Quality
Prevents premature movements of machine components
SMARTFLOW VERSASWITCH LIMIT SWITCHES…
Prevent
• Over 1 million cycle life provides dependable service. Equipment
• 180°F (82°C) standard temperature rating allows Damage and
installation into most molding applications. Accidents
• Adjustable operating point provides custom Shown Actual Size
installation.
• In stock to provide same-day delivery.
• Stripped and tinned 6ft. wire leads make the switch 0.56" 0.11"
ready to install without modification. 14.2mm 2.8mm
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
896 B13-4-070 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Made in the U.S.A
THINSWITCH® Limit Switch TM
4 Bar Quality
Verify ejector plate return before closing the mold
The Thinswitch has been tested for reliability over 10 million cycles Drill and tap #10-24 x 3/8" deep
without failure. Two switches can be used in series for larger molds to accept #10 button head screws
included with Thinswitch® limit switch
to ensure the ejector plate return, preventing costly mold damage.
Materials
Liquid Resistant Model (175° F Max)
Body ................................................ Fiberglass-reinforced nylon
143447 T-222-LR 116.00
Dome ...................................................................... Polyurethane
Back Cover ............................................................. Polyester film
B4: General Mold Care
Wire Leads .......... 22ga stranded, 3-conductor, shielded cable, Liquid Resistant Model (250° F Max)
6 ft. (1.8m) long, ends stripped and tinned 143521 HT-291-LR 128.00
SMARTFLOW and THINSWITCH are registered trademarks of Burger & Brown Engineering, Inc.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-071 897
TM
SMARTLOCK® Slide Retainer and Limit Switch Made in the U.S.A
4 Bar Quality
Prevents premature slide movement during part injection
Electrical Properties
Electric Strength-
Perpendicular S/T in Air ASTM D 149 Vpm 50 kv/mm 2
Physical Properties
Water Absorption ASTM D 570 % by wt. 0.02 % by wt. 0.02
Density ASTM D 792 lbs/ft3 123 g/cm sq 1.97
Thickness Tolerance Inches 0.002 mm 0.05
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-073 899
Flir Thermal Imaging Camera
5 Bar Quality
TM
Measurement Modes: Center Spot (E5 and E6 also include Area Box and Auto Hot/Cold Detection)
Frame Rate: 9 Hz
Field of View: 45° x 34°
900 B13-4-074-051216 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Low Cost Brass Scrapers
For removing stuck plastic parts from the mold! 3 Bar Quality
TM
5 in 1
Scraper
• Scraper
• Putty Knife
• Spreader
• Rounded Paint Roller
Cleaner
• Pointed Crack Opener
Solid
.057"
Spring-
Tempered
Brass
Blades
1 3 5
Tough
Nylon
Handles
and
Made in the U.S.A
Brass 4
Grommets
2
6
Item Number Description Length Overall Blade Length Unit Price
1 128196 11/4" Wide Scraper 73/4" 35/8" $4.40 ea.
2 128201 15/16" Wide, Long Handle Scraper 113/4" 35/8" 10.40 ea.
3 128197 2" Wide Scraper 73/4" 35/8" 6.25 ea.
4 128199 21/2" Wide, 5 in 1 Scraper 71/4" 45/8" 7.50 ea.
5 128198 3" Wide Scraper 8" 45/8" 7.50 ea.
6 128200 3" Wide, Long Handle Scraper 121/2" 41/4" 12.55 ea.
B4: General Mold Care
Order TODAY!
Heavy Duty and Bent Style Scrapers also available — see next page
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-075 901
IMS Heavy Duty BRASS SCRAPERS
For removing even the most stubborn plastic parts from the mold!
TM
3 Bar Quality
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
902 B13-4-076 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
TM
BRASS BRUSHES
For tough spot cleaning WITHOUT SCRATCHING Value–Priced Supplies
Economy Model
Item # Description Unit Price
133849
133849 5
/8" bristle length;
11/8" wide x 31/4" long overall $ 1.50
Hard,
Maplewood
Handles
Heavy Duty Models
TM
3 Bar Quality
101058 11
/16" bristle length; 85/8" long overall 1.90
101087 1
/2" bristle length; 77/8" long overall 1.15
100942
SHIPPED FROM STOCK
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-077 903
Top Quality BRASS RODS
TM
3 Bar Quality For use on ALL Molds, Dies, Nozzles and Sprue Bushings
SAFE! SPEEDS
Will NOT removal of stuck
scratch molds Made in the U.S.A
sprues & runners
1 1
/8" dia.
2
3
OVERSIZED Plastic Grips 3
/16" dia.
for easier handling
4
5
/8" dia.
3
6
ITEM NUMBER DESCRIPTION LENGTH OVERALL UNIT
(includes handle) PRICE
1 101144 1
/8" dia., straight with point 13 3/4" $5.45 ea.
2 100965 1
/8" dia., 90° bend with point 11" 5.95 ea.
3 101109 3
/16" dia., 90° bend with point 11 1/4" 6.20 ea.
4 101078 3
/16" dia., straight with point 13 3/4" 5.90 ea.
5 101020 3
/8" dia., straight with point 13 3/4" 8.85 ea.
6 101050 3
/8" dia., straight with FLAT head 13 3/4" 8.85 ea.
133/4”
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
904 B13-4-078 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
BRONZE SPRUE PULLER TOOLS
®
Select
TM
Standard Duty
60° Needle Nose (CNB-7)
15/8" 6 7/8"
81/2"
108636 $66.60
Angled
Serrated
60°
Tip 60° Rounded Nose —#108634 for
Heavy Duty leverage
Tool
Serrated 15° Flat Back (BDS8)
••• Jaw
11/4 " 108632 $75.00
615/16"
Edge
Made 7 /16"
13
in the
U.S.A. Straight, Snub Nose — #116584
8"
Jaw
Edge 11/8" 613/16" 108042 $66.60
715/16"
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-079 905
TM
Lightweight,
durable construction Won’t
Spring opened design Scratch
Protect mold
and operator
Molds!
Item # Description Unit Prices
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
906 B13-4-080 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
IMS SPRUE PULLERS (with Replacement Brass Screws) TM
ALL-BRASS
REPLACEABLE
SCREWS,
ALUMINUM GRIPS...
...WON’T DAMAGE
YOUR MOLD
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-081 907
Heavy Duty, Cast Aluminum Air Guns
TM
Designed expressly for quiet, safe and efficient use
3 Bar Quality
of compressed air and long service life
Now 2 Styles
Soft Grip, Safety Air Gun
Complete with 18” extension and Super Air Nozzle
Allows hours of continuous use — without fatigue!
Convenient
Hanger Hook
for easy
storage
Super
Air Nozzle™ 18” Aluminum Extension Pipe Soft
Aids reaching normally inaccessible areas Ergonomic
Pistol
(Other nozzles and extensions available — INQUIRE) Grip
Exair’s award winning Super Air Large Trigger
permits operation
Nozzle™ provides a high thrust,
with one or
concentrated stream of high velocity more fingers
airflow for blowoff, cooling, drying
and cleaning applications. The
sound level is extremely low (74 dBA)
Item No. 138473 /4" NPT
1
Inlet
and air consumption is minimal.
Super Air Nozzle™ is a trademark of Exair Corp.
$103.07
#144370 with 6” Extension- $100.68
Remember!
Always use eye protection
when cleaning with air!
TM
BOTH IN STOCK
Other style Air Guns, Tips, Extensions and Hose available — INQUIRE
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
908 B13-4-082 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Tips and Accessories
For use on Heavy Duty Die Cast Air Guns TM
3 Bar Quality
$17.60
104331 Cleaning Tip
with Male Quick Disconnect Fitting
Wide open tip pressures: 100 - 125 lbs. $3.85
104419 OSHA Safety Tip with Male Quick Disconnect Fitting
Reduces 100-lb. line pressure to 30 lbs.;
features air cone chip guard and pressure
relief holes specified by law. $4.15
104384 OSHA Safety Tip with Male Quick Disconnect Fitting
Reduces 125-lb. line pressure to 30 lbs.;
features air cone chip guard and pressure
relief holes specified by law. Inquire
Quick
disconnect
fittings and tips
104396 12" Aluminum Extension Tube (1/8" N.P.T.) $4.10 sold separately
1
/8 male N.P.T. $3.85
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-083-120414 909
TM
• 1
/4"- 40
Lever Action
For Easy Operation
RUGGED Thread
Optional Accessories
101153 5" Copper Extension Pipe $3.35
116558 9" Copper Extension Pipe 3.95
116557 17" Copper Extension Pipe 5.45
Safety Glasses
Adjustable One-Piece Lens Safety Glasses
• Nylon frame and one-piece
Item # Description Price (each) clear polycarbonate lens
121966 One-Piece Lens Safety Glasses $3.15 • Virtually 100% UV protection
Ask about other lenses • Easy to slide adjustment
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
910 B13-4-084 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
SELF-COILING AIR HOSES TM
IMS Self-Coiling Air Hose Assemblies are compatible with most air tools 3 Bar Quality
that have N.P.T. Female Thread or Quick-Disconnect Fittings
Straight Straight
Swivel Swivel
Male Male
N.P.T. Straight
N.P.T.
Fitting Rigid
Fitting
Male
N.P.T.
Straight Fitting
Spring
Swivel Male
Guard
Spring N.P.T.
Guard Fitting
NOTE: To comply with OSHA Regulation 1910.242(b), select a hose and air gun combination designed to reduce
your tip pressure to less than 30 psi when using compressed air for cleaning.
B4: General Mold Care
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-085-051017 911
Heavy Duty Gloves
Protect fingers from burns, while keeping hands cool
TM
3 Bar Quality
$5.70 $5.70
Fit either hand (Per dozen pairs)
on both
worn on
sides
improve either Just each $1.00
grip hand! Buy 12+(Save 10%) $ .90 ea
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
912 B13-4-086-032015 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Particulate Respirators
Help keep your operators safe and productive
• Provide comfortable, reliable worker protection in hot,
®
humid environments or long periods of wear.
• Patented 3MTM Cool FlowTM Exhalation Valve offers
Select
easy exhalation and cool, dry comfort. 5 Bars
= Highest Quality & Value Products = Industry Standard Quality Products = Value–Priced Supplies
Select
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-087-121815 913
TM
Safety Glasses
3 Bar Quality
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
914 B13-4-088-120413 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
EJECTORJET Vacuum Break /Air Ejectors
Designed to replace less effective, single-purpose poppet valves 3 Bar Quality
TM
Vacuum Break/
Air Ejector
OPENED
Position
(oversize
drawing)
- HOW IT WORKS - 3
/4"
When the mold opens, compressed air forces the EJEC-
TORJET spring-return valve forward (See Air Actuator
System). The air first breaks the vacuum holding the part
in the core and/or cavity, then blows through the air Made in the U.S.A
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-089-042117 915
FIXED-ANGLE Air Ejectors
3 Bar Quality
TM
For FASTER, MORE EFFECTIVE Molded Part Blow-Off Made in the U.S.A
30°
45°
60°
30°, 45°, 60° or 90°
.358 max INTERNAL AIR JETS
stroke 90° let you select the angle best suited to eject your plastic part
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
916 B13-4-090 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Air Actuator System TM
For use with Vacuum Break/Air Ejectors, Fixed-Angle Air Ejectors 3 Bar Quality
• AIR OPERATED
no electrical connections
required
• VERSATILE
magnetic bases easily
moved for different molds
• SIMPLE
3
/8" inlet from Air Line Tee Adapter
HOW IT WORKS
The Air Actuator method is a pneumatic
30-150 psi control system which can be magnetically
air supply attached to any injection molding machine.
required 4' of 3/16"
Polyethylene When the Actuator Wand is moved one inch
Air Differential Tubing
Valve
in any direction, the Air Differential Valve
to Valve
Air Line
opens, supplying air to the Vacuum Break
Tee Adapter and/or Fixed-Angle Air Ejectors, or
(connects to other air blow-off devices
air inlet on mold)
listed on these
pages.
3
/8" air line to mold ports.
#104451 Regulator ............................................................... 52.65
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-091 917
TM
Air Differential Blowoff Systems
3 Bar Quality
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
918 B13-4-092 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.
Air Amplifier Tips
For use with Air Differential Blow-Off Systems
Reduce: Shop Noise
— 2 STYLES — Energy Consumption
Compressor Loading
— IN STOCK —
TRANSVECTOR™ is a Trademark of VORTEC Corp.
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
© Copyright 2013 IMS Company. All rights reserved. Please refer to imscompany.com for current pricing B13-4-093 919
• Mold/Die Components
• Nozzles & Screw Tips
• Screws & Barrels
for more information go to: www.imscompany.com/ec
E&MS Catalog A: Catalog C: MROP
• Design / Build / Repair • Mold Releases • Hoppers & Loaders • HVAC & Abrasives
• Custom Parts • Heater Bands • Chillers & Circulators • Hand & Power Tools
• Fabricate • Degating Tools • Dryers & Granulators • Electrical & Plumbing
for more information go to: for more information go to: for more information go to: for more information go to:
www.imscompany.com/ems www.imscompany.com/ms www.imscompany.com/ie www.imscompany.com/mrop
®
www.imscompany.com/ec phone order toll-free
(USA & Canada) 1.800.537.5375
fax order toll-free (USA & Canada) phone order toll-free (Mexico) tech support toll-free (USA & Canada) e-mail
Engineered
Components & Supplies 1.888.288.6900 001.888.304.1307 1.866.467.9001 components@imscompany.com
920 B13-4-094 Please refer to imscompany.com for current pricing © Copyright 2013 IMS Company. All rights reserved.