Beruflich Dokumente
Kultur Dokumente
$QFKRUVHOHFWRU
Anchor type Base material Approvals Application
Aerated concrete
Seismic approval
Shock approval
Fire tested
Mechanical anchor systems
Heavy duty anchors
HDA-T/ -TR/TF/-P/-PR/-PF Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ Anchor fastening for high
undercut anchor loads e.g. in steel
construction and plant
construction
8 09 / 2012
Anchor selector
Advantages Drill bit Specification Setting Page
diameter resp.
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
Automatic undercutting Drill bit dia.: Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ 72
High load capacity 20 – 37 mm
Approved for all dynamic loads Anchor size:
M10 – M20
09 / 2012 9
Anchor selector
Aerated concrete
Seismic approval
Shock approval
Fire tested
Medium and light duty
anchors
HAM hard sleeve anchor Ɣ Ɣ Secure fastenings in various
base materials
Ɣ = very suitable ż = may be suitable per application Ɣ = technical report 1) redundant fastening
10 09 / 2012
Anchor selector
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
Wings to prevent spinning in the Drill bit dia.: Ɣ Ɣ Ɣ 174
bore hole 12 – 20 mm
Plastic cap in cone to prevent Thread:
dust entrance M6 – M12
09 / 2012 11
Anchor selector
Aerated concrete
Seismic approval
Shock approval
Fire tested
Medium and light duty
anchors
HLD light duty anchor Ɣ Ɣ ż Fastenings to weak material
with cavities
Ɣ = very suitable ż = may be suitable per application Ɣ = technical report 1) redundant fastening
12 09 / 2012
Anchor selector
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
Flexibility of screw length Drill bit dia.: Ɣ 264
Resilient toggling action to suit 10 mm
every base material
09 / 2012 13
Anchor selector
Aerated concrete
Seismic approval
Shock approval
Fire tested
Medium and light duty
anchors
HK ceiling anchor Ɣ Ɣ Ɣ Ɣ Fastening of suspended
1) ceilings, cable trays, pipes
Insulation fasteners
IDP insulation Ɣ Ɣ Ɣ Ɣ Fastening of hard, self
fastener supporting insulating
materials
Ɣ = very suitable ż = may be suitable per application Ɣ = technical report 1) redundant fastening
14 09 / 2012
Anchor selector
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
Small bore hole Drill bit dia.: Ɣ Ɣ Ɣ 314
Quick and easy setting 6 mm
M6
Approved (DIBt) Without Ɣ Ɣ Ɣ 320
Fire resistance predrilling
Immediately loadable Thread:
M6 – M10
Approval for single point Drill bit dia.: Ɣ Ɣ Ɣ Ɣ 326
fastenings 10 – 14 mm
Approved for sprinkler systems Thread:
M6 – M10
Load carried by strong metal Drill bit dia.: Ɣ 330
channel and screw 13 – 14 mm
Convincing simplicity when
setting
09 / 2012 15
Anchor selector
Aerated concrete
Seismic approval
Shock approval
Fire tested
Adhesive anchor systems
Foil capsule systems
HVZ Ɣ Ɣ Ɣ Ɣ Ɣ Heavy-duty fastenings with
adhesive small spacing and edge
anchor distances
Ɣ = very suitable ż = may be suitable per application Ɣ = technical report 1) redundant fastening
16 09 / 2012
Anchor selector
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
No expansion pressure M10 – M20 Ɣ Ɣ Ɣ Ɣ Ɣ 348
Small edge distances and
spacing
A strong and flexible foil capsule
No expansion pressure HAS M8 – M39 Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ 360
Small edge distances and HIS-M8 - M20
spacing Rebar dia.
A strong and flexible foil capsule 8 – 40 mm
09 / 2012 17
Anchor selector
Aerated concrete
Seismic approval
Shock approval
Fire tested
Injection mortar systems
HIT-HY Ɣ Ɣ Ɣ Ɣ Adhesive anchor in cracked
150 MAX concrete
Ɣ = very suitable ż = may be suitable per application Ɣ = technical report 1) redundant fastening
18 09 / 2012
Anchor selector
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
anchor size
Through-fastening
Steel, galvanised
External thread
Internal thread
Pre-setting
No expansion pressure HIT-V M8 – M30 Ɣ Ɣ Ɣ Ɣ Ɣ Ɣ 558
No styrene content HIS-M8 - M20
No plasticizer content Rebar dia.
Environmental protection due to 8 – 25 mm
the minimized packaging
09 / 2012 19