Beruflich Dokumente
Kultur Dokumente
1st Edition
LSA-PLUS® Series 2
Connection and Disconnection Modules and Accessories
A technically and commercially superior quick connection system for all state-of-the-art networks.
Contacts that ensure the highest degree of reliability even under the most adverse environmental and
climatic conditions. A completely reliable, gas-tight connection between the contact and conductor.
That's LSA-PLUS® technology.
The LSA-PLUS System family consists of a comprehensive and diverse range of high density, standard
and special modules, mounting hardware, test and patch cords, accessories and protection devices.
Voice, high-speed data transmission via ISDN, ADSL, VDSL, cable TV, Internet access, mobile networks:
working in conjunction with TE Connectivity you will be able to confidently face the issues created by
vast amounts of network traffic. In addition, TE quality ensures total end-customer satisfaction. TE copper
connectivity solutions are designed to deliver fast, safe and reliable transmission.
2 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Connection Modules
Series 2 Eight- and Ten-Pair Modules
Ordering Information
3 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Disconnection Modules
Series 2 Eight- and Ten-Pair Modules
Ordering Information
4 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA PROFIL® Series 2
Disconnection Module for 2 Mbps Networks
Description
The expansion of mobile communications networks, the
introduction of new mobile phone systems (3G, UMTS, 4G,
LTE) and the steady growth of IP networks, have created
a demand for bandwidth in both access and transmission
networks. This in turn causes the extension of existing hubs
and the installation of new hubs.
• Applications include:
– Internet backbone
– GSM networks
– UMTS networks
Ordering Information
5 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Mounting and Labelling Accessories
Selection criteria
Calculating necessary installation space: Back mount frame length = Module spacing x (number
of modules – 1) + 20mm
Frame depth: based on conductor diameter of 0.5mm, including insulation of 1.5mm. Deeper frames
must be selected for wires measuring 0.6mm – 0.9mm, or when the cable is fed through the frame
bundle by bundle.
• Up to 70 pairs: >12mm
Module spacing:
• 25mm with jumper guides on one side
• 27.5mm with jumper guides on one side, when wire with thicker insulation is used
Hole pattern:
• Hole pattern 1: Central cable entry. Used with mounting adapters for wall mounting
or for installation in customer premises connection boxes
• Hole pattern 2: Right-side cable entry, for universal use with asymmetrical mounting
6 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Back Mount Frames with 22.5mm and 25.0mm Module Spacing
Ordering Information
7 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Back Mount Frame with 27.5mm Module Spacing
Ordering Information
Depth of Module
Description Number of Modules Cable Space spacing Catalog Number
LSA-PLUS Series 2, 10-pair, 4 22mm 27.5mm 6569 3 054-11
Depth of cable space/frame:
6 22mm 27.5mm 6569 3 054-12
22mm Hole pattern: 2
11 22mm 27.5mm 6569 3 054-13
13 22mm 27.5mm 6569 3 054-15
LSA-PLUS Series 2, 10-pair, 10 Series 2, 10-pair
Depth of cable space/frame: modules, plus 1 additional 50mm 27.5mm 6569 3 054-16
50mm Hole pattern: 2 module or label holder
20 Series 2, 10-pair
modules, plus 1 additional 50mm 27.5mm 6569 3 054-17
module or label holder
30 Series 2, 10-pair
modules, plus 1 additional 50mm 27.5mm 6569 3 054-18
module or label holder
8 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Back Mount Frame
• Blocks of 100 pairs separated from each other (spacing between groups of 10 modules is 30mm)
Ordering Information
9 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Modular Back Mount Frame
Ordering Information
10 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Back Mount Frame for Cable Head Installations
Ordering Information
11 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Dust Cover
Ordering Information
12 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Mounting accessories for Back Mount Frames
Ordering Information
13 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Profile Rod Frames
Ordering Information
14 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Modules
Individual Profile Rods and Rod Holders
Ordering Information
15 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Mounting Accessories
Mounting Adapter
Ordering Information
16 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Mounting Accessories
Profile Rod Installation Accessories
17 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Mounting Accessories
Profile Rod Installation Accessories
Ordering Information
18 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Mounting Accessories
DIN Rail Adapter
Ordering Information
19 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Labelling Accessories
Label Holder Module
Ordering Information
20 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Labelling Accessories
Hinged Label Holder
Ordering Information
21 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Labelling Accessories
Number Flags for Series 2 Modules
Ordering Information
22 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
Insertion Tools
LSA-PLUS® Insertion Tools
• Service life
– 0.4mm wire: 200,000 connections
– 0.6mm wire: 100,000 connections
– 0.8mm wire: 50,000 connections
• No scissors mechanism
Ordering Information
23 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Series 2 Modules
Accessories: Plugs and Cords
Ordering Information
24 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Series 2 Modules
Accessories: Plugs and Cords
Test Cord
The two-pole test cord features a 4mm double socket and
can be used for almost all LSA-PLUS systems, including NT
modules, Series 2, Series 8 or Series 10 modules, as well as
two- to eight-pole PCB modules. The cord is used whenever
the module’s existing test access is already occupied by
another plug (such as changeover adapters and/or
disconnection adapters) or when a module has no special
test access. The spring test contacts connect directly to the
wired LSA-PLUS contact. Clamping ribs within the LSA-PLUS
contact slot ensure that test plugs are securely retained.
Ordering Information
25 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Series 2 Modules
Accessories: Plugs and Cords
Test Cords
26 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Series 2 Modules
Accessories: Plugs and Cords
Ordering Information
27 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Series 2 Modules
Accessories: Plugs and Cords
Connection Cords
28 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Connection Modules
Series 2 Eight- and Ten-Pair Modules
Ordering Information
29 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
LSA-PLUS® and LSA PROFIL® Connection Modules
Series 2 Eight- and Ten-Pair Modules
Ordering Information
30 www.te.com/adc 1-919-557-8900 Fax: 1-919-557-8498 08/11 201621BE
TE Connectivity and TE connectivity (logo) are trademarks. Other logos, product
and/or Company names might be trademarks of their respective owners
While Tyco Electronics has made every reasonable effort to ensure the accuracy
of the information in this document, Tyco Electronics does not guarantee that it
is error-free, nor does Tyco Electronics make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. Tyco
Electronics reserves the right to make any adjustments to the information
contained herein at any time without notice. Tyco Electronics expressly disclaims
all implied warranties regarding the information contained herein, including,
but not limited to, any implied warranties of merchantability or fitness for a
particular purpose. The dimensions in this document are for reference purposes
only and are subject to change without notice. Specifications are subject
to change without notice. Consult Tyco Electronics for the latest dimensions and
design specifications.
1st Edition
www.te.com / www.te.com/adckrone