Beruflich Dokumente
Kultur Dokumente
INDEX
1 INTRODUCTION 3
2 STANDARDS 3
3 DESIGN CRIERIA 3
4 DESIGN PHILOSOPHY 3
5 DESIGN CALCULATION 4
Allowable bearing pressure on support = Fp = 0.35 f'c sqrt(A 2 / A1) <= 0.70 f'c
Use M 25 bolts
Capacity of bolt in
Tension (Tb) = 60.9 kN Ref Table J3.2, AISC 13th Edition
Nos. of bolt = 4
Tension per bolt (tb) = 0.0 kN tb/Tb = 0.00 <=1 Hence Safe
Shear per bolt (vb) = 11.6 kN vb/Vb = 0.36 <=1 Hence Safe
Resultant of Shear and Tesnion Ratio = 0.358 <= 1.2 Hence Safe
Since bolts are not in tension, provide minimum bolt length.
AS per AISC 13th Edition,
Min. Edge Distance = 32mm Ref. Table J3.4M
Max. Edge Distance = 12xt & Max 150mm Ref Cl. J3.5
Min. Spacing = 3 x bolt dia. i.e. 75mm Ref. Cl. J3.3
Max. Spacing = 300mm Ref Cl. J3.5
Permissible Shear Stress Fnv= 24 ksi (165 MPa) Ref Table J3.2
Permissible Tensile Stress Fnt = 45 ksi (310 Mpa) Ref Table J3.2
Client : GULF STEEL WORKS Date : 07/12/21 Sheet no