1) Not incl. in scope of del. 2) Unusable area 3) Nom. stroke = Meas. length 4) Mounting surface 5) Internal thread M4x4/6 deep
Series Rod Analog interface, current
General attributes Ambient temperature Ta max. 85 °C
Approvals / Conformity CE Ambient temperature Ta min. -40 °C cULus Cable/connector out Axial Enclosure Type per IEC 60529 IP67 (with connector) Connector type M16 Generation Generation 7 E module 200 kN/mm² No of magnets, factory setting 1 ST EN55016-2-3 (emission) Indust. and residential area Polarity reversal protected Up to 36 V EN60068-2-27 (shock) 150 g / 6 ms Short circuit protected to GND and to 36 V DC EN60068-2-29 (contin. shock) 150 g / 2 ms EN60068-2-6 (vibration) 20 g, 10…2000 Hz Electrical attributes EN60068-2-64 (noise) 20 g, 10…2000 Hz Connection type Connector EN61000-4-2 (ESD) Severity Level 3 Current draw (at 24 V DC) ≤ 150 mA EN61000-4-3 (RFI) Severity Level 3 Error signal Ia falling 3.6 mA EN61000-4-4 (Burst) Severity Level 3 For dynamic loop applications No EN61000-4-5 (Surge) Severity Level 2 Inrush current ≤ 500 mA / 10 ms EN61000-4-6 (HF fields) Severity Level 3 Interface Analog interface, current EN61000-4-8 (magnetic fields) Severity Level 4 Interface group Analog Flange material Stainless steel 1.3952 Load resistance RL max. ≤ 500 Ohm Housing material Anodized aluminum Non-linearity max. ±50 µm Mounting type Threaded flange M18x1.5 Number of magnets max. 1 ST Null point 30.0 mm Operating voltage UB max. DC [V] 28.0 V Number of poles 8 Operating voltage UB min. DC [V] 20.0 V O-ring material Viton Output signal 20…4 mA Offset mounting surface Yes Output signal adjustable With setup tool Outer tube material Stainless steel 1.4571 Via programming inputs Pressure resistance ≤ 600 bar Overvoltage protected Up to 36 V Relative humidity < 90 %, non-condensing Potential isolation No Repeat accuracy ±5 µm Programming inputs 20 … 28 V DC, High-active Storage temperature max. 100 °C Ripple 0.5 Vpp Storage temperature min. -40 °C Voltage resist (GND – housing) 500 V AC Style Series Rod TK, typ. (at 50 % of 500 mm) ≤ 30 ppm/K Mechanical attributes Version Type B Nominal stroke 50 mm With O-ring Yes
Internet www.balluff.com For definitions of terms, see main catalog BTL0703_221175_04/09/151(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change Balluff USA 1-800-543-8390 Balluff China +86 (0) 21-50 644131 Micropulse transducer BTL7-E170-M0050-B-S32 BTL0703
Internet www.balluff.com For definitions of terms, see main catalog BTL0703_221175_04/09/152(2)
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change Balluff USA 1-800-543-8390 Balluff China +86 (0) 21-50 644131