Beruflich Dokumente
Kultur Dokumente
Used as a trim and drain valve Used as a trim and drain valve Used to prevent reverse flow of
in fire sprinkler systems • in fire sprinkler systems • water in fire protection systems
Bronze body • NPT female Bronze body • NPT female • Bronze body • NPT female
threaded ends as per ANSI B2.1 threaded ends as per ANSI B2.1 threaded ends as per ANSI B2.1
• Rubber seat disc • Metal • Rubber seat disc • Metal • Bronze clapper • Rubber seat
handwheel • 200 PSI rated handwheel • 200 PSI rated disc • 200 PSI rated
GV612 1/4" thru 2" AV112 1/4" thru 2" CV422 1/4" thru 2"
Used as a sprinkler system trim Allows inspection and/or Used on branch lines to filter
or for manual deluge system replacement of sprinkler debris and sediment from
shutoff • Quarter turn system gauge without shutting sprinkler and deluge system
operation • Forged brass • Full off entire line • Cast bronze • piping • Also used in alarm lines
port • Self-cleaning chrome Rising stem • Screwed bonnet • to protect water motor alarm •
plated ball • PTFE seat • Rubber seat disc • Metal Cast bronze • 20 mesh stainless
Blowout proof stem • NPT handwheel • NPT female steel screen • Female NPT
female threaded ends as per threaded ends as per ANSI B2.1 blow-off connection with steel
ANSI B2.1 • UL listed from 1/2” • 400 PSI rated plug • NPT female threaded
through 2" sizes ends as per ANSI B2.1 • 200 PSI
Part # Size rated
Part # Sizes
GTV25 1/4"
Part # Sizes
BV216U 1/4" thru 2"
YS712 1/4" thru 2"
Overall
Valve Type Size Inlet Outlet Approx. Wt. Part #
Length
Listed and approved for fire sprinkler system use • All butterfly
valves featured are suitable for indoor or outdoor use • RCV series
check valves offer economical option to traditional wet pipe alarm
check valves when used with flow switch and alarm bell
Wafer & Groove Type Bronze Butterfly Valves RCV Series Check Valves
Butterfly Valves
Popular alternative to OS & Y Used as a system control valve Used to prevent reverse water
gate valves • Ductile iron on sprinkler systems • Bronze flow • Also suitable for use as a
grooved or wafer style body • body • Rubber encapsulated riser check valve in wet pipe
Aluminum bronze disc • bronze disc • Stainless steel sprinkler systems using a
Stainless steel stem • Ductile stem • Steel gear operator “shotgun” style arrangement •
iron gear operator with flag enclosure with flag indicator • May be installed horizontally or
indicator • Factory installed Factory installed supervisory vertically (upward flow only) •
supervisory switch • Suitable switch • Suitable for indoor or Cast iron body with grooved
for indoor or outdoor use • 300 outdoor use • 175 PSI rated ends • Brass and stainless steel
PSI rated working pressure • UL working pressure • UL listed • trim • Spring loaded clapper
listed • FM approved FM approved with EPDM disc • 2" tapped
port for riser installation • 300
Wafer Style Threaded Ends PSI rated working pressure • UL
listed • FM approved
Part # Size Part # Size
BVG25W. . . . . . . . . . . . . . . . 2-1/2" BBV10T.. . . . . . . . . . . . . . . . . . . . . 1" Part # Size
BVG30W. . . . . . . . . . . . . . . . . . . . 3" BBV12.. . . . . . . . . . . . . . . . . . 1-1/4" CVG25. . . . . . . . . . . . . . . . . . 2-1/2"
BVG40W. . . . . . . . . . . . . . . . . . . . 4" BBV15T.. . . . . . . . . . . . . . . . . 1-1/2" CVG30. . . . . . . . . . . . . . . . . . . . . . 3"
BVG60W. . . . . . . . . . . . . . . . . . . . 6" BBV20T.. . . . . . . . . . . . . . . . . . . . . 2" CVG40. . . . . . . . . . . . . . . . . . . . . . 4"
BVG80W. . . . . . . . . . . . . . . . . . . . 8" BBV25T.. . . . . . . . . . . . . . . . . 2-1/2" CVG60. . . . . . . . . . . . . . . . . . . . . . 6"
Product Highlights
< Operates automatically off line < Easily maintained without removal
pressure from line
< Throttling seat retainer for flow and < Diaphragm replaced without removal
pressure stability of internal stem assembly
< Diaphragm assembly guided top and < Replaceable seat ring
bottom < Alignment pins assure proper
< Heavy duty nylon reinforced reassembly after maintenance
diaphragm < Valves factory tested, serial
< Rectangular shaped soft seat provides numbered, and registered
drip-tight Class VI closure
< Ductile iron < Deluge Valves Contact our project estimating
< Cast steel < Pressure Reducing Valves team and provide the following
< Nickel aluminum bronze < Fire Pump Pressure Relief information: Valve type • Size •
< Cast bronze Valves Globe or angle pattern • Type
< Stainless steel < Fire Pump Suction Control of end connection and pressure
Valves class rating, if applicable • Body
< Pressure Control Valves material • Trim material •
< Altitude Valves Voltage, if applicable • Special
< Float Valves inspection and/or testing
< Thermal Expansion requirements, if any • Special
Pressure Relief Valves needs or installation
requirements • Quantity
Contact customer service for full details on available brands and models. Due to
manufacturer marketing and distribution agreements, certain products are distributed
by GMR Fire only in selected areas.
How To Order
< Size < Number, size, and type of blow off connections
< Expected working pressures and temperatures < Gauge taps, if required
< Water source, e.g. fresh water, sea water, < Any other special requirements
untreated industrial water, reclaimed water