Beruflich Dokumente
Kultur Dokumente
5. Two signals that have the same peaks and valleys are called_______________.
a. reflected
b. 180 degrees out of phase
c. out of phase
d. in phase
8. Each of the following is a name for the electromagnetic signal that has been modified
to carry information except:
a. carrier signal.
b. carrier wave.
c. carrier.
d. carrier keying.
10. A _____________ is a basic unit of power of 1 amp of current that flows at 1 volt.
a. V
b. W
c. R
d. P
11. The power that most WLANs transmit is less than ________________________.
a. 2.45 GHz
b. 200 mW
c. −120 dBm
d. 65 V
12. The reference point that relates the logarithmic relative decibel (dB) scale to the
linear milliwatt scale is known as the _______________.
a. decibel milliwatt (dBm)
b. decibel (dB)
c. milliwatt carrier (mWc)
d. R scale
13. Which of the following is a typical recommended signal strength for a WLAN?
a. 99 dB
b. 0.01 mW
c. 32 W
d. −70 dBm
14. A loss of 3 decibels means that _______ percent of the power in mW has been lost.
a. 25
b. 50
c. 75
d. 90
15. Each of the following is a reason why RSSI should not be used as a true indicator of
signal strength except:
a. RSSI is not a linear scale.
b. all possible mW or dBm values may not be represented by the RSSI values.
c. each vendor may implement RSSI differently.
d. RSSI was not intended to be used in this way.
16. The materials concrete, wood, and asphalt that “soak up” an RF signal can all cause
______.
a. reflection
b. refraction
c. scattering
d. absorption
20. ________________ occurs when a multipath signal arrives 180 degrees out of
phase.
a. Downfade
b. Corruption
c. Mirroring
d. Nulling