Beruflich Dokumente
Kultur Dokumente
Fig. 1
2. Find the order of an active low pass Butterworth filter whose specifications are given 12
as: Ap = 0.5dB at a pass band frequency (ωp) of 31.8Hz, and As = 20dB at a stop band frequency
(ωs) of 127.3Hz. Also design a suitable Butterworth filter circuit to match these requirements.
Fig. 2
The output port is connected to a variable load for maximum power transfer. Find RL and the
maximum power transferred.
Fig. 3
Fig. 4
Name and signature of moderator with date Name and signature of paper setter with date
Page 2 of 2
Fig. 5 Fig. 6
7. (a) For the circuit in Fig. 7, find v(t) and i(t) for t > 0. Consider these cases (i) R = 5 Ω, 12
(ii) R = 4 Ω, (iii) R = 1 Ω.
(b) In the two-port as shown in Fig. 8, Let y12 = y21 = 0, y11 = 2 mS and y11 = 10 mS. 8
Find Vo/Vs.
Fig. 7
Fig. 8
8. (a) Determine the y parameters for the two-port shown in Fig. 9. 12
(b) Obtain the potential of node F with respect to node G in the circuit of the Fig. 10. 8
All values are in ohm.
Fig. 9
Fig. 10
Name and signature of moderator with date Name and signature of paper setter with date