Sie sind auf Seite 1von 1

RRC Reestablishment Optimize Switch

MO GlobalProcSwitch
Parameter ID RrcReestOptSwitch
Parameter Name RRC Reestablishment Optimize Switch
NE BTS3900, BTS3900 LTE
MML Command MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
Meaning Indicates whether the eNodeB supports RRC connection reestablishment in enhanced scenarios. This parameter provides the following options:
PCI_CONFUSION_REEST_SWITCH: This option specifies whether the eNodeB supports RRC connection reestablishment in PCI confusion scenarios. The eNodeB
supports reestablishment in scenarios where PCIs of neighboring cells are the same only if this option is selected.
S1_HANDOVER_REEST_SWITCH: This option specifies whether the eNodeB supports RRC connection reestablishment in S1-based handovers. The eNodeB
supports reestablishment in S1-based handovers only if this option is selected.
NO_CONTEXT_REEST_SWITCH: This option specifies whether the eNodeB uses 3GPP-defined RRC connection reestablishment without UE context. If this option is
selected, the eNodeB uses 3GPP-defined RRC connection reestablishment without UE context. If this option is deselected, the eNodeB uses common RRC connection
reestablishment without UE context.
SEC_CMD_REEST_SWITCH: This option specifies whether the eNodeB responds to RRC connection reestablishment requests from UEs when security mode is
activated. The eNodeB responds to the requests if this option is selected and rejects the requests if this option is deselected.
WITH_X2_NO_NCELL_REEST_SWITCH: This option specifies whether the eNodeB supports RRC connection reestablishment when an X2 interface is configured
between the source and target eNodeBs but the source and target cells are not configured as neighboring cells of each other. This type of RRC connection
reestablishment is supported only if this option is selected.
IsKey NO
Mandatory NO
Dynamic Attribute NO
Feature ID None
Feature Name None
Value Type Bit Field Type
GUI Value Range PCI_CONFUSION_REEST_SWITCH( PCI_CONFUSION_REEST_SWITCH), S1_HANDOVER_REEST_SWITCH(S1_HANDOVER_REEST_SWITCH),
NO_CONTEXT_REEST_SWITCH(NO_CONTEXT_REEST_SWITCH), SEC_CMD_REEST_SWITCH(SEC_CMD_REEST_SWITCH),
WITH_X2_NO_NCELL_REEST_SWITCH(WITH_X2_NO_NCELL_REEST_SWITCH)
Enumeration Number/Bit PCI_CONFUSION_REEST_SWITCH~0, S1_HANDOVER_REEST_SWITCH~1, NO_CONTEXT_REEST_SWITCH~2, SEC_CMD_REEST_SWITCH~3,
WITH_X2_NO_NCELL_REEST_SWITCH~4
Unit None
Actual Value Range PCI_CONFUSION_REEST_SWITCH, S1_HANDOVER_REEST_SWITCH, NO_CONTEXT_REEST_SWITCH, SEC_CMD_REEST_SWITCH,
WITH_X2_NO_NCELL_REEST_SWITCH
Default Value PCI_CONFUSION_REEST_SWITCH:Off, S1_HANDOVER_REEST_SWITCH:Off, NO_CONTEXT_REEST_SWITCH:Off, SEC_CMD_REEST_SWITCH:Off,
WITH_X2_NO_NCELL_REEST_SWITCH:Off
Recommended Value PCI_CONFUSION_REEST_SWITCH:On
S1_HANDOVER_REEST_SWITCH:On
NO_CONTEXT_REEST_SWITCH:On
SEC_CMD_REEST_SWITCH: On, recommended if RRC connection reestablishment requests are rejected on the live network with security mode activated; Off,
recommended in other scenarios
WITH_X2_NO_NCELL_REEST_SWITCH: On, recommended if the ADD_NCELL_CFG_SW or MOD_NCELL_CFG_SW option of the X2BasedUptNcellCfgSwitch
parameter in the GlobalProcSwitch MO is selected.Note: If the WITH_X2_NO_NCELL_REEST_SWITCH option is selected, the PCI_CONFUSION_REEST_SWITCH
option does not take effect.
Initial Value Setting Source Default/Recommended Value
Impact GlobalProcSwitch
Parameter Relationship None
Access Read & Write
Service Interrupted After Modification No
Interruption Scope N/A
Interruption Duration (min) N/A
Caution If the WITH_X2_NO_NCELL_REEST_SWITCH option is selected, it is recommended that the ADD_NCELL_CFG_SW or MOD_NCELL_CFG_SW option of the
X2BasedUptNcellCfgSwitch parameter in the GlobalProcSwitch MO be selected. Note: If the WITH_X2_NO_NCELL_REEST_SWITCH option is selected, the
PCI_CONFUSION_REEST_SWITCH option does not take effect.
Validation of Modification The parameter modification has no impact on the equipment.
Impact on Radio Network Performance PCI_CONFUSION_REEST_SWITCH: In PCI confusion scenarios, if this option is selected, the RRC connection reestablishment success rate increases. Deselecting
this option has no impact on network performance.
S1_HANDOVER_REEST_SWITCH: For RRC connection reestablishment after S1-based handovers, if this option is selected, the RRC connection reestablishment
success rate increases. Deselecting this option has no impact on network performance.
NO_CONTEXT_REEST_SWITCH: If this option is selected and RRC connection reestablishment without UE context involving devices provided by other vendors exists
in the network, the RRC connection reestablishment success rate increases. Deselecting this option has no impact on network performance.
SEC_CMD_REEST_SWITCH: If there are RRC connection reestablishment requests and security mode is activated, the reestablishment success rate and E-RAB
setup success rate increase. Deselecting this option has no impact on network performance.
NO_CONTEXT_REEST_SWITCHL: If this option is selected, the success rate of RRC connection reestablishment increases when the following conditions are all met:
1. An RRC connection reestablishment without the UE context procedure occurs. 2. The source and target cells are not configured as neighboring cells of each other. 3.
An X2 interface is configured between the source and target eNodeBs. Deselecting this option has no impact on network performance.

Introduced in Version... BTS3900: V100R011C00


BTS3900 LTE: V100R011C00
Attribute Radio
Applicable Mode L

Huawei Proprietary and Confidential


Copyright © Huawei Technologies Co., Ltd.

Das könnte Ihnen auch gefallen