Beruflich Dokumente
Kultur Dokumente
Which command restores files from a volume group backup on a specified media?
A. mksysb -r
B. savevg -r
C. restorevg -r
D. restorevgfiles
Answer: A
QUESTION NO: 2
A non-root user can run rsh commands from serverA to serverB, but attempts to run rsh
commands by the root user return with apermission error message. What action will resolve the
m
problem?
Answer: D
lTe
QUESTION NO: 3
tua
A recently installed package needs to be rolled back to aprevious version. Which of the following
commands will perform the task?
Ac
A. reject
B. cleanup
C. deinstall
D. uninstall
Answer: A
QUESTION NO: 4
How can a JFS2 filesystem be added to a volume groupthat has insufficient space to host a log
LV?
Answer: C
QUESTION NO: 5
Which of the following allows multiple applications toshare a single operating system resource?
A. Logical Partition
B. Workload Partition
C. Dynamic Logical Partition
D. Shared Processor Logical Partition
m
Answer: B
.co
QUESTION NO: 6
sts
When ordering a new IBM Power Systems server, a customer is given the option of two types of
Hardware Management Console:7042-CR4 and 7042-C06.Which main difference between the
options would influence the customer's decision?
lTe
A. The 7042-CR4 is a rack mounted model, compared to the 7042-C06, which is a desktop.
B. The 7042-CR4 is limited to 16 managed systems, compared to a limit of 32 for the 7042-C06.
tua
C. The 7042-C06 has faster CPUs and twice the RAM compared to the 7042-CR4,which is suited
to large enterprise deployments.
D. The 7042-C06 can manage POWER5-based hardware, in addition to POWER6, while the
Ac
Answer: C
QUESTION NO: 7
Which port must be open on the HMC to allow remote web access?
A. 22
B. 80
C. 443
D. 8080
QUESTION NO: 8
Answer: B
m
QUESTION NO: 9
Which POWER6 virtualization technology is the minimum to enable multiple shared processor
pool functionality?
.co
A. PowerHA Standard Edition
sts
B. PowerVM Standard Edition
C. Power6 Management Edition
D. Power6 Virtualization Edition
lTe
Answer: B
tua
QUESTION NO: 10
Ac
What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1?
A. 128 MB
B. 256 MB
C. 512 MB
D. 1024 MB
Answer: B
QUESTION NO: 11
What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can
provide if no VIO Server is connected to the IVE?
Answer: D
QUESTION NO: 12
An administrator wants to deploy a complex LPAR environment on a 595. What is the most current
tool available for documenting the proposed LPAR configuration and determining if there are
adequate IO resources?
m
C. LPAR Validation Tool.
D. System Validation Tool. .co
Answer: B
sts
QUESTION NO: 13
lTe
Where will an administrator find documents in PDFformat that include detailed architecture and
step-by-step installation instructions for Power servers?
tua
Answer: D
QUESTION NO: 14
Which of the following is a situation where dual (redundant) HMCs are recommended?
QUESTION NO: 15
A customer has a requirement for a single AIX LPAR to be highly available. The customer only
has enough funding to purchase a single system. Which would be the most critical option to
mitigate AIX availability?
Answer: A
m
QUESTION NO: 16 .co
What is the difference between the CUoD and Utility Capacity On Demand?
sts
A. Utility allows for activation of resources by the hour.CUoD allows for permanent access to
additional resources installed into the system.
B. Utility allows for permanent access to additional resources installed into the system.CuOD
lTe
D. Utility allows for a 30 day usage of additional resources installed into the system.CUoD allows
for permanent access to additional resources installed into the system.
Ac
Answer: C
QUESTION NO: 17
An administrator plans to use bootable AIX media to boot a system into maintenance mode. The
system is running AIX 5.3 TL09 with a64-bit kernel. The administrator has a selection of media
available. Which media should the administrator use?
QUESTION NO: 18
In which file created by a mksysb would an administrator find filesystem and logical volume
information?
A. /fs.data
B. /image.data
C. /bosinst.data
D. /install.data
Answer: B
m
QUESTION NO: 19
.co
Which command can be used to show volume group information about filesystems and OS levels
for a specified mksysb called server1.mksysb?
sts
A. lsmksysb -lf server1.mksysb
B. restore -mrT server1.mksysb
C. listbackup -fT server1.mksysb
lTe
D. listvgbackup -l server1.mksysb
Answer: A
tua
QUESTION NO: 20
Ac
A. /usr/local/include/tcpd.h
B. /usr/local/restores/tcpd.h
C. /usr/local/restores/include/tcpd.h
D. /usr/local/restores/usr/local/include/tcpd.h
Answer: A
QUESTION NO: 21
Answer: A
QUESTION NO: 22
A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1.
What must be done to donate any unusedprocessing capacity to the shared processor pool?
m
A. In the HMC Properties, select the options to allow processor sharing when the partition is
inactive and active.
.co
B. In the LPAR Properties, select the options to allow processor sharing when the partition is
inactive and active.
C. In the LPAR Profile Properties, select the options to allow processor sharing when the partition
sts
Answer: C
tua
QUESTION NO: 23
Ac
The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an
LPAR. The operator ran the cfgmgr command expecting to see 2 processors after that, but did not
see them. What action must be done to apply the changes?
Answer: C
QUESTION NO: 24
A. Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..
B. Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade
Data.
C. Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then
the Upgrade Data.
D. Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data,
and then the HMC Data.
Answer: A
m
QUESTION NO: 25
.co
An administrator is looking for the "Open RestrictedShell Terminal" option on the HMC GUI. Under
which panel is this option available?
sts
Answer: A
tua
QUESTION NO: 26
Ac
Answer: A
An administrator wants to host several LPARs on a JS23 Blade server. To achieve this, what
additional management software is required?
A. HMC
B. IVM
C. VIOS
D. IBM Director
Answer: C
QUESTION NO: 28
On which HMC GUI panel can the 'Enable Electronic Service Agent' option be found?
m
A. HMC Management
B. Systems Management
C. Service Management
.co
D. Electronic Management
sts
Answer: C
lTe
QUESTION NO: 29
tua
The system hangs at boot time after starting NFS services. What is the most likely cause?
A. The action parameter ofrcnfs in /etc/inittab is 'off' and the script called is not exiting.
B. The action parameter ofrcnfs in /etc/inittab is 'wait' and the script called is not exiting.
Ac
C. The action parameter ofrcnfs in /etc/inittab is 'once' and the script called is not exiting.
D. The action parameter ofrcnfs in /etc/inittab is 'respawn' and the script called is not exiting.
Answer: B
QUESTION NO: 30
The administrator created an entry in the inittab for run level 2. The system was already booted in
normal mode. Which will start the newly created entry?
A. init 1
B. /etc/rc
C. telinit q
Answer: C
QUESTION NO: 31
A. service -lbootlist
B. bosboot -ad service
C. listboot -l service
D. bootlist -om service
Answer: D
m
QUESTION NO: 32
.co
An administrator has mirrored rootvg onto hdisk1,after the physical volumes finished syncing the
administrator wants to add the newdisk to the boot order.Currently the boot order looks like:
sts
hdisk0 blv=hd5 Which of the following commands will add hdisk1 to the current boot order?
lTe
A. bootset -a hdisk1
B. bootlist -om normal hdisk1
C. setbootlist -m hdisk0 hdisk1
tua
Answer: D
Ac
QUESTION NO: 33
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly.
Which of the following tasks must be performed before changing the boot order?
Answer: C
A system was rebooted and is taking a long time to return. The administrator has logged into the
HMC and sees reference code 0c9. What does this mean?
Answer: B
QUESTION NO: 35
Which key should be pressed on an ASCII terminal during the system initialization to force the
m
system to read from the default bootlist?
A. 1
B. 3
.co
C. 5
sts
D. 9
Answer: C
lTe
QUESTION NO: 36
tua
An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the
disk so it can be used as the primary boot partition on the next reboot. Which command should the
Ac
administrator use?
Answer: A
QUESTION NO: 37
A system has two configured fibre channel cards, one of which, fsc0, has failed and must be
replaced. Which command should an administrator use to remove the card device and attached
child devices?
Answer: A
QUESTION NO: 38
Which command enables new devices that are connected to the scsi5 adapter without performing
a full scan of the system?
A. cfgmgr -f scsi5
B. cfgmgr -i scsi5
C. cfgmgr -t scsi5
m
D. cfgmgr -l scsi5
Answer: D
.co
sts
QUESTION NO: 39
Which command will enable the administrator toquery the current network adapter configuration?
lTe
A. netstat -v
B. entstat -d
tua
C. lsattr -El
D. lsdev -C -attr
Ac
Answer: A
QUESTION NO: 40
Which command can be used to display information from the PvDv object class in the ODM?
A. odmlist
B. odmshow
C. lsdev -P
D. lsattr -El
Answer: C
Which command will allow the creation of a10-character login user name?
A. chlogin -a log_name=10
B. chdev -l sys0 -a max_logname=10
C. chusr extended_logname=true [userid]
D. chuser login_name=10 extended_logname=true [userid]
Answer: B
QUESTION NO: 42
m
A. swapoff paging04 rmps paging04
B. swapoff /dev/paging04 rmps paging04
C. swapoff paging04 rmps /dev/paging04
D. swapoff /dev/paging04 rmps /dev/paging04
.co
sts
Answer: B
lTe
QUESTION NO: 43
A. swapon paging01
B. chps a y paging01
C. mkps a /dev/paging01
Ac
D. swap a /dev/paging01
Answer: A
QUESTION NO: 44
QUESTION NO: 45
A user is unable to determine the default system texteditor. How can the local administrator assist
the user by identifying the default text editor for the system?
Answer: B
m
QUESTION NO: 46
.co
Which command will migrate a filesystem from onevolume group to another?
A. cpfs
sts
B. cplv
C. mkfscopy
D. migratepv
lTe
Answer: B
tua
QUESTION NO: 47
Ac
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been
installed, the fibre cables are attached to the adapters.How should the administrator configure the
disks?
A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the
server, run 'cfgmgr' to discover and configure the disks.
B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the
server, run 'cfgmgr' to discover and configure the disks.
C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the
server, run 'cfgmgr' to discover and configure the disks.
D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the
server, run 'cfgmgr' to discover and configure the disks.
Answer: D
QUESTION NO: 48
A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge
127.127.1.0 stratum 0', and then refresh the daemon.
B. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line
'master 127.127.1.0 stratum 0', and then refresh the daemon.
C. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line
'fudge 192.168.22.22 stratum 0', and then refresh the daemon.
D. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and addthe line
'master 192.168.22.22 stratum 0', and then refresh the daemon.
m
Answer: C
.co
QUESTION NO: 49
sts
A. Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.
lTe
B. Edit the /etc/resolv.conf file to have a nameserver and a domain search order.
C. Edit the /etc/resolv.conf file to have a nameserver, domain, and domain search order.
D. Edit the /etc/netsvc.conf file to have a nameserver, domain, and domain search order.
tua
Answer: C
Ac
QUESTION NO: 50
Answer: A
A system is experiencing packet routing problems, when the administrator runs 'netstat -nr' the
following default routes are displayed: default165.253.251.1UG51601304 en8-default
192.168.50.1UGH01590450 en4-- Assuming the first route is correct, how can the administrator
remove the incorrect default route?
Answer: C
QUESTION NO: 52
m
An administrator has set up serverA and serverB to use the /etc/hosts.equiv file so that
.co
applications on serverA can remotely run commands on serverB. Which command will verify if a
new user from serverA is trusted on serverB?
sts
A. As the root user fromserverA run the command rhost serverB.
B. As the root user fromserverA run the command rlogin serverB.
C. As the desired user fromserverB run the command rhost serverA.
lTe
Answer: D
tua
QUESTION NO: 53
Ac
The ping loopback hangs with no output. Which of the following is the most likely cause?
Answer: D
QUESTION NO: 54
After updating serverB's network configurations, an administrator notices that serverA, which
resides in a different subnet, is unable to communicate with serverB via ssh or telnet. As ping's to
Answer: B
QUESTION NO: 55
A project requires a new server to be set up with the ability to automatically fail over its Ethernet
connection to a second connection if a network failure occurs. Which of the following provides
m
greatest resiliency?
.co
A. Two switch ports will be needed on a switch, two Ethernet cables will be needed for the server
each connecting to two different Ethernet cards, and one IP address will be needed.
B. Two switch ports will be needed on two different switches, two Ethernet cables will be needed
sts
for the server each connecting to two different Ethernet cards, and one IP address will be needed.
C. Two switch ports will be needed on two different switches, two Ethernet cables will be needed
lTe
for the server each connecting to two different Ethernet cards,two different IP addresses will be
needed.
D. One switch port will be needed on one switch, a splitter will be needed to split the connection,
tua
two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,
and two different IP addresses will be needed.
Answer: B
Ac
QUESTION NO: 56
A. nfsd
B. biod
C. rpc.lockd
D. rpc.mountd
Answer: D
Which file contains the attributes used to setup a new user account when executing 'mkuser'
without any flags?
A. /etc/security/user
B. /etc/security/passwd
C. /etc/security/mkuser.sys
D. /etc/security/mkuser.default
Answer: D
QUESTION NO: 58
m
A. chsec
B. chusr
C. passwd
.co
D. chgusrprf
sts
Answer: A
lTe
QUESTION NO: 59
tua
Which command will set the core size file to unlimitedfor the user 'webapp'?
A. no -p 'core=-1'webapp
B. chuser 'core=-1' webapp
Ac
Answer: B
QUESTION NO: 60
Which environment variable must be changed in auser's profile so that upon login, the command
prompt identifies the server?
A. PMT
B. PS1
C. PRT
Answer: B
QUESTION NO: 61
Answer: B
m
QUESTION NO: 62
.co
Which command will display the current control keysettings?
sts
A. 'tty -l'
B. 'stty -a'
C. 'lstty -a'
lTe
D. 'terminfo -l'
Answer: B
tua
QUESTION NO: 63
Ac
How should read, write and execute permissions for 'group' and 'other' be granted to all files and
directories within the /app filesystem?
Answer: A
QUESTION NO: 64
Answer: B
m
QUESTION NO: 65
.co
Which installation method enables the quickest recovery in the event of failure when upgrading
from AIX 5.3 to AIX 6.1?
A. Usealt_disk_install.
sts
Answer: A
tua
QUESTION NO: 66
Ac
An administrator is installing AIX. The SMS panel lists the following network adapter:
NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1AV4-
C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system.
What speed and duplex should be configured on this adapter?
A. 100/Full
B. 1000/Half
C. 1000/Auto
D. Auto/Auto
Answer: D
An administrator migrates from AIX 5.3 to AIX 6.1. Upon completion, a client questions why files
are missing from /tmp. How should the administrator respond to the client?
Answer: B
QUESTION NO: 68
m
A. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Preservation
.co
install for the install type, and allow upgrade to run.
B. Shut down the server and perform a network boot from a local NIM server. SelectPresevation
install for the install type, and allow upgrade to run.
sts
C. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade,Presevation
install for the install type, and allow for upgrade to run.
D. Re-boot the server and NFS mount thebos images from a local NIM server. Run smit install.
lTe
Select Presevation install for the install type, and allow upgrade to run.
Answer: A
tua
QUESTION NO: 69
Ac
The output from an oslevel command results in the following warning message: Not all filesets for
61-00-040815_SP were found.Which command will display the filesets that are missing from this
service pack?
Answer: C
QUESTION NO: 70
A. APPLIED
B. REMOVED
C. REJECTED
D. COMMITTED
Answer: D
QUESTION NO: 71
Which tool validates firmware and HMC compatibility for a proposed AIX upgrade?
A. SPT
m
B. LVT
C. FLRT
D. SSIC
.co
Answer: C
sts
QUESTION NO: 72
lTe
Where can the Open Source prerequisite filesets that allow the installation of the Firefox Web
browser be found?
tua
A. Fix Central
B. IBM AIX Toolbox
Ac
Answer: B
QUESTION NO: 73
A. /usr/sbin/nim_init
B. /usr/bin/installnim
C. /usr/sbin/nimconfig
D. /usr/sbin/setup_server
QUESTION NO: 74
m
D. The lpp_AIX6 does not contain all of the required software packages for NIM CUST
installationoperations.WArialCourier NewTimes New RomanZ
Answer: C
.co
sts
QUESTION NO: 75
lTe
The current permanent system firmware image is EM340_041 The current temporary system
tua
firmware image is EM340_075The system is currently booted from the temporary firmware image.
Which command will display similar information?
A. lsmcode
Ac
B. diag -S 1
C. prtconf | grep firmware image
D. invscout -vf [Server system name]
Answer: A
QUESTION NO: 76
Which describes the operation required to move to anew release level of system firmware?
A. Deferred
B. Transient
C. Concurrent
Answer: D
QUESTION NO: 77
An administrator needs to apply a Technology Level update. During the preview install, the output
indicates that there is insufficientspace in the /usr filesystem. Review of the root volume group
indicates there are no available physical partitions, but the /test jfs2 filesystem is only 8% used.
What is the most efficient method to use the available space in the /test filesystem to apply
theupdate?
m
D. Backup the /testfilesystem, remove it, and recreate it with a smaller size
Answer: A
.co
sts
QUESTION NO: 78
How can an administrator verify that the disk is stillusable when the output of 'lspv' shows 'hdisk1'
lTe
is in a missing state?
A. lspv -l hdisk1
tua
B. lscfg -l hdisk1
C. lsattr -l hdisk1
D. dd if=/dev/hdisk1 bs=512k count=10 of=/tmp/disk.txt
Ac
Answer: D
QUESTION NO: 79
Which of the following explains the relationship between a physical and logical partition?
A. A physical partition is hosted on one or more logical partitions. A logical partition is used when
describing storage.
B. A logical partition is hosted on one or more physical partitions. A physical partition is used when
describing storage.
C. A physical partition is used when describing only a SCSI or SAS disk. A logical partition is used
when describing a SAN LUN.
Answer: B
QUESTION NO: 80
A system has a mirrored data volume group that has a filesystem /data of 10 logical partitions.
How many physical partitions will thefilesystem have?
A. 1
B. 2
C. 10
D. 20
m
Answer: D
.co
QUESTION NO: 81
sts
What must an administrator do to create two new volume groups on a system with only one spare
disk?
lTe
A. Run the 'mkvg -M' command to create multiple volume groups on a single disk.
B. Add a new disk to the system or release a disk from the one of the existing volume groups.
C. Run the 'mkvg' command to create multiple volume groups on a single disk providing the disk
tua
Answer: B
QUESTION NO: 82
The 'lsvg -o' command is run with an output of only rootvg, but the server has another volume
group named datavg, which is notdisplayed. What is the likely cause?
QUESTION NO: 83
An administrator wants to mirror an importantfilesystem between two disks without mirroring the
entire volume group. Which command should be used?
A. cplv
B. mirrorvg
C. mklvcopy
D. migratelv
Answer: C
m
QUESTION NO: 84
.co
The server host1 has been set up as a backup system with the following /etc/exports:
/backups -rw How can a second server regularly use this disk space?
sts
A. /usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lv00 -b -l host1
B. /usr/sbin/crnfsmnt -d /backups -l /backups host1 -R -X -v -S -b bg
C. /usr/sbin/mknfsmnt -f /backups -d /backups -h host1 -a -S -t rw -w bg -g
lTe
Answer: C
tua
QUESTION NO: 85
Ac
A log logical volume is created as indicated below: root@host1:/# mklv -a c -t jfs2log -b y datavg 1
loglv00 root@host1:/# lsvg -l datavg datavg: LV NAMETYPELPsPPsPVsLV STATE MOUNT
POINT loglv00jfs2log111closed/syncdN/AA new filesytem is then created using the new log logical
volume. When the administrator attempts to mount the filesytem, the following error
occurs:root@host1:/# mount /newfs mount: 0506-324 Cannot mount /dev/lv00 on /newfs:
A system call received a parameter that is not valid. Which of the following actions will resolve this
error?
QUESTION NO: 86
Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/file1. What will the result be if a user makes
changes to /tmp/file2 at the same time another user tries to delete /tmp/file1?
A. All three files will contain the updates and will remain available.
B. All three files will be deleted and no changes will be made to /tmp/file2.
C. Only /tmp/file2 will contain the updates, but /tmp/file3 will remain available.
D. Both /tmp/file2 and /tmp/file3 will contain the updates and will remain available.
Answer: D
m
QUESTION NO: 87
.co
LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers.
Which command will validate that both storage paths are available?
sts
A. lspath
B. sdd query adapter
C. pcmpath query adapter
lTe
Answer: A
tua
QUESTION NO: 88
Ac
A. lssrc -s errord
B. errorlog -histsize
C. /usr/lib/errdemon -l
D. ls -l /var/adm/ras/errlog
Answer: C
QUESTION NO: 89
Answer: A
QUESTION NO: 90
Which command must be run to log a hardware repair entry in the errorlog?
A. diag
B. cfgmgr
C. errlog
D. errlogger
m
Answer: A
.co
QUESTION NO: 91
sts
An administrator suspects problems on a SCSI hard disk, but upon running diagnostics, no errors
were found. What must be done to check the condition of the drive?
lTe
Answer: A
QUESTION NO: 92
A. kdb
B. snap
C. truss
D. trace
Answer: A
Which command will determine if the Trusted Computer Base is enabled on a system?
A. getrunmode
B. getsecconf
C. tcbck -display
D. odmget -q attribute=TCB_STATE PdAt
Answer: D
QUESTION NO: 94
Which command will list ODM class descriptions to provide the format needed to create a new
class?
m
A. odmadd
B. odmget
C. odmshow
.co
D. odmcreate
sts
Answer: C
lTe
QUESTION NO: 95
tua
Which command shows dump components and controls live dump attributes?
A. dumpctrl
B. sysdumpdev
Ac
C. livedumpdev
D. livedumpctrl
Answer: B
QUESTION NO: 96
Which command will retrieve /unix and dump fromthe dump device?
A. snap -R
B. snap -D
C. snap -U
D. snap -N
QUESTION NO: 97
An application writes to a log file in the /logs filesystem that is full. After the log file is deleted, 'df'
still shows the filesystem as 100% full. What is the likely cause of the problem and what will
resolve it?
A. The deleted file is still open by the application. The system must be rebootedbefore'df' will show
the reduction in the filesystem.
B. The deleted file is still open by the application. The application must bestoppedbefore 'df' will
show the reduction in the filesystem.
C. Thefilesystem is still marked as full in the /etc/fs.status file. The system must be rebooted
before 'df' will show the reduction in the filesystem.
m
D. Thefilesystem is still marked as full in the /etc/fs.status file. The application must be stopped
before 'df' will show the reduction in the filesystem.
Answer: B
.co
sts
QUESTION NO: 98
lTe
A booting system appears to be hanging with an LED code of 0c54. What is the likely cause?
Answer: A
QUESTION NO: 99
An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?
Answer: C
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with
reference code 0c31. What is the most likely cause?
A. The system is waiting for user input to define console type lft0.
B. The system is waiting for user input to define console type tty0.
C. The system is waiting for user input to define console type vty0.
D. The system is waiting for user input to define console type vsa0.
Answer: C
NIM fails to successfully network-boot an LPAR and install AIX. The administrator wants to first
m
rule out network configuration or routing to be the cause. Which sequence of steps can be
employed to debug the network-boot process?
.co
A. 1. Comment out thebootps entry from the /etc/inetd.conf file on the LPAR.
2. Stop all running processes.
sts
3. Restart inetd using the 'refresh -s inetd' command.
4. Flush the ARP table on the NIM master.
5. Initiate the network boot of the LPAR.
lTe
B. 1. Comment out thebootps entry from the /etc/inetd.conf file on the NIM master.
2. Stop all running bootpd processes.
3. Restart inetd using the 'refresh -s inetd' command.
tua
Answer: B
What can be done to enable the debug information for functions to be displayed when using 'ksh -
x' to debug a script?
Answer: D
Which command synchronizes or rebuilds the logical volume control block, the device
m
configuration database, and the volume group descriptor areas on the physical volumes?
A. syncvg rootvg
B. synclvm rootvg
.co
C. varyonvg rootvg
sts
D. synclvodm rootvg
Answer: D
lTe
An administrator is attempting to recover afilesystem that fails to manually unmount. The fsck
command produces the following output: The current volume is: /dev/fslv02 File system is
Ac
currently mounted. Invalid file system size in the primary superblock. Invalid file system size in the
secondary superblock. Primary superblock is corrupt. Secondary superblock is corrupt. fsck:
0507-018 Superblock is corrupt and cannot be repaired. Both primary and secondary copies are
corrupt. Cannot continue tried to mount Which steps will resolve the problem?
A. Reboot the server into maintenance mode and run 'fsck' with the '-p' parameter while the
filesystem is mounted.
B. Reboot the server into maintenance mode and run 'fsck' with the '-y' parameter whilethe
filesystem is unmounted.
C. Forcea umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck -p /dev/fslv02'
while the filesystem is unmounted.
D. Forcea umount of the filesystem by varying off the hosting volume group and then varyon the
volume group. This will permit 'fsck -y' to be run against the failing filesystem.
The 'fsck -p /dev/lv00' command returned thefollowing message: Not a recognized filesystem type
What is the likely cause of the problem and how should it be resolved?
A. The file system superblock is dirty. It can be replaced from the VGDA.
B. The logical volume superblock is dirty. It can be replaced from the VGDA.
C. The file system superblock is dirty. It can be replaced from the secondary copy.
D. The logical volume superblock is dirty. It can be replaced from the secondary copy.
Answer: C
m
QUESTION NO: 106
.co
Which command will list all subsystem resources on a server?
A. lssrc a
sts
B. lssrc g
C. lssrc l
D. lssrc -s
lTe
Answer: A
tua
A. wlmrun
B. wlmstart
C. wlmcntrl
D. wlmstartup
Answer: C
Answer: A
Which of the following can an operator use to shutdown a system into single-user mode?
A. shutdown -d
B. shutdown -s
C. shutdown -m
D. shutdown -Fr -s 1
m
Answer: C
.co
sts
lTe
tua
Ac