Sie sind auf Seite 1von 6

RITS, Bhopal

Format No.

LECTURE PLAN Issue


Page No:

Department Mechanical Engineering Session : 2013-14


Name of
Amit Kumar Vishwakarma Semester 3rd
Faculty
Sub.
Subject Strength & Mechanics of Materials ME-303
Code
(B) TIME SCHEDULE : Total expected periods: 58 __, Extra periods (if
required)_____
Max.
Day Mon Tue Wed Thu Fri Sat
available
No. of
Periods 1 1 1 1 1 NA

Lectures
S.NO. TOPICS TO BE COVERED Required
REMARKS

Unit I
Mechanical properties of Materials, Behavior of materials under
1 Tension, Compression, Bending, Shear, Failure of MS and CI in
1
Tension and Torsion
Stresses in members of a structure, axial loading, normal stress,
2 shear stress, bearing stress ,stress strain diagram, Hooke’s law, 2
modulus of elasticity, elastic and plastic behavior of materials
Stress analysis of stepped rods, members in series and parallel
3 Deformation under axial loading, Statically indeterminate 2
problems
4 Stress and Strain analysis due to Temperature 2
Poisson’s ratio, Bulk modulus, Shear strain, relation among
5 elastic constants 2
Residual stress, fiber reinforced composite materials, Strain
6 energy under axial loads and stresses due to impact of falling 1
weights
7 Tutorial 2
8 Unit Test 1 1
Unit – II
9 Ductile and Brittle failures, Transformation of Stress and Strain
1
Normal and Shear Stress, Principal stresses, (Uni-axial, Bi-
10 Axial, Pure Shear and Bi-axial with Shear Loading Conditions) 3
Mohr’s circle and its application to two and three dimensional
11 analysis 2
Transmission shaft under combined bending and torsion
12 1

Prepared By : Approved By (HOD):


RITS, Bhopal
Format No.

LECTURE PLAN Issue


Page No:

13 Stresses in thin walled Pressure vessel 1


14 Tutorial 2
15 Unit Test 2 1
Unit - III
16 Shear Force and BM, relationship among load
1
17 Shear force and BM diagram 2
18 Pure Bending, Bending Equation in Beams 1
19 Bending of symmetric member, deformation and stress 1
20 Bending of composite sections, eccentric axial loading 1
21 Shear stresses in beams, strain energy in bending 2
22 Equation of elastic curve, Deflection of beams 2
Macaulay’s method and Area moment method for deflection of
23 beams 1
24 Tutorial 2
25 Unit Test 3 1
Unit –IV
26 Torsion Equation in shafts
1
27 Stresses in a shaft, deformation in circular shaft 1
Angle of twist, stepped-hollow, thin walled-hollow transmission
28 shafts 1
29 Leaf springs, Stress in Leaf spring 1
30 Helical springs, open and closed coil 1
31 Deflection of helical spring, springs in series and parallel 1
32 Tutorial 2
33 Unit Test 4 1
Unit –V
34 Theories of failures
1
35 Maximum normal stress & shear stress theory 1

Prepared By : Approved By (HOD):


RITS, Bhopal
Format No.

LECTURE PLAN Issue


Page No:

36 Maximum normal and shear strain energy theory 1


37 Maximum distortion energy theory 1
Application of theories to different materials and loading
38 conditions 1
39 Columns: stability of structures 1
40 Euler’s formula for columns with different end conditions 1
41 Rankin’s formula 1
42 Tutorial 2
43 Unit Test 5 1

Prepared By : Approved By (HOD):


RITS, Bhopal
Format No.

LECTURE PLAN Issue


Page No:

Prepared By : Approved By (HOD):


RITS, Bhopal
Format No.

LECTURE PLAN Issue


Page No:

Prepared By : Approved By (HOD):


RITS, Bhopal
Format No.

LECTURE PLAN Issue


Page No:

Prepared By : Approved By (HOD):

Das könnte Ihnen auch gefallen