EXTERNAL COLD WATER DISTRIBUTION 1 Unplasticated PVC Tiger Pipe and fittings to BS 4514 in cold water installations: A 50 mm Diameter Tiger Pipe 65 Lin.m 2,200.00 B 50 mm Diameter Bend 4 NO 1,200.00 C 50 mm Diameter Tee 4 NO 1,200.00 D 32 mm Diameter Tiger Pipe 120 Lin.m 1,250.00 0 E 32 mm Diameter Bend 22 NO 1000.00 F 32 mm Diameter Tee 12 NO 1000.00 G 50mm x 50mm x 32 mm reducer Tee 10 NO 3,500.00 H 32mm x 32mm x 25 mm reducer Tee 8 NO 3,000.00 I 25 mm Diameter Bend 12 NO 850.00 J 25 mm Diameter Tiger Pipe 175 Lin.m 900.00 K 25 mm Diameter Tee 10 NO 650.00 L 50mm Diameter Gate Valve 4 NO 5,500 M 32mm Diameter Gate Valve 15 NO N 25mm Diameter Gate Valve 10 NO O 25mm Diameter Gate Non- return valve 10 NO WATER STORAGE TANK A Overhead 120,000 Litres water Tank’’ARMECO’’ or other equal and approved water tank of standard fabrication size 8.10m long x 6.10m wide x 2.44m high in accordance with Engineer’s specifications made from 5.0m thick mild steel plates to BS 449, mounted on 20m High Tower including Ladder with security cage to top of tank externally, step iron to bottom of tank internally, with and include 1 No. 1 SET Manhole of 500mm diameter with lid, 38,000,000.00 25mm diameter socket for inlet, 50 diameter socket for outlet and over flow and wash down pipes, 1 No. level indicator. All internal surface of tank to be wire brushed and treated with two coats non-poisonous black bitumen paint with external surface treated two coats of lead oxide primer and finished with one coat of aluminum paint. WATER STORAGE TANK CONT’D A Replacement of existing 5000 Litres 10 NO storex plastic (overhead) with 8,000 litres storex plastic water tank. B Renovation 2 No. Pump House 2 NO supplying existing 40 No. 5000 Litres storex overhead water on 5.0 meters steel stanchion. C 1.5 HP surface surface water pump 4 NO [ GROUND FOS or DABS] Complete with installations accessories. D Allow for the installations of float switch LOT SUM on the existing proposed overhead storex tanks. INDUSTRIAL BOREHOLE
A Geophysical investigation to determine LOT SUM
the most suitable location for the borehole. B Mobilization of drilling equipments, LOT SUM material and personnel to site C Construction of mud-pit for drilling LOT SUM process. D Drilling of soft and hard rock to 50 MTR. accommodate 150 mm diameter casing and screens (provisional depth 50m) to second acqufer. E Supply and installation of PVC casing LOT SUM and screens including all fittings and accessories F Full development of the borehole till LOT SUM water is clean and initial chlorination G Pumping test of the borehole to LOT SUM determine its maximum yield H Supply and installation of 2 HP 1 NO submersible pumps complete with associated fitting and accessories. J Supplying and installation of 50mm LOT SUM diameter associated UPVC pressure riser pipe with safety rope and accessories. K 1 NO Electrical automatic control panel complete with necessary protection and accessories L Electrical connection of pump and LOT SUM cabling from borehole to the generator/ panel room M Supply and installation of 50mm LOT SUM diameter associated UPVC pressure to connect ground tank and accessories SUMMARY FOR BOREHOLE
COLLECTION PAGE 1 PAGE 2 PAGE 3 PAGE 4 TOTAL VAT (5%) GRAND TOTAL