Transmit Main Parameters (Message ID 15)

This message is sent by Black Box in response to a “Request Main Parameters” message. It is also received by Black Box, allowing

English
an external editor to overwrite Black Box’s settings.

Status Description
1111 0000 System Exclusive (SysEx) ID
0000 0000 M-Audio ID byte 1 = 00h
0000 0001 M-Audio ID byte 2 = 01h
0000 0101 M-Audio ID byte 3 = 05h
0000 0001 Black Box family code LSB (always 01h)
0000 0000 Black Box family code MSB (always 00h)
0000 0010 Black Box family member ID LSB = 02h
0000 0000 Black Box family member ID MSB = 00h
0000 1111 Message ID for “Transmit Main parameters”
0000 0010 File Version main/MIDI data structure
0ddd dddd Main parameters: 16 bytes coded into 19 bytes of 7-bit MIDI data (see “Data packing” below.)
1111 0111 End of Exclusive (EOX)

NOTE: After the external device sends this message, it should either wait a full second or wait until a “Save Complete” (ID 17) message is
returned before sending any further messages.

Save Complete (message ID 17)

After a Transmit Preset message is received by Black Box, this message will be sent out as an acknowledgement. After the
transferred data has been successfully saved to flash, Black Box sends this message. Until it is sent, Black Box will ignore any
subsequently received messages.The external device should wait for this message before sending another message. If the external
device can not detected messages from Black Box, the external device should wait one second before sending another message.

Status Description
1111 0000 System Exclusive (SysEx) ID
0000 0000 M-Audio ID byte 1 = 00h
0000 0001 M-Audio ID byte 2 = 01h
0000 0101 M-Audio ID byte 3 = 05h
0000 0001 Black Box family code LSB (always 01h)
0000 0000 Black Box family code MSB (always 00h)
0000 0010 Black Box family member ID LSB = 02h
0000 0000 Black Box family member ID MSB = 00h
0001 0001 Message ID for “Save complete”
1111 0111 End of Exclusive (EOX)

User Guide ♦ 51

Downloaded from www.Manualslib.com manuals search engine