Beruflich Dokumente
Kultur Dokumente
Version 6.20
ZTE CORPORATION
ZTE Plaza, Keji Road South,
Hi-Tech Industrial Park,
Nanshan District, Shenzhen,
P. R. China
518057
Tel: (86) 755 26771900 800-9830-9830
Fax: (86) 755 26772236
URL: http://support.zte.com.cn
E-mail: doc@zte.com.cn
LEGAL INFORMATION
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
Revision History
Document
ZXG10 iBSC (V6.20) Base Station Controller Performance Counter Manual – Volume I
Name
Document Revision
Product Version V6.20 R1.3
Number
Equipment
Serial No. sjzl20083208
Installation Date
Presentation:
(Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization,
Appearance)
Good
Fair
Average
Poor
Bad
N/A
Intelligibility:
(Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content)
Good
Fair
Average
Poor
Bad
N/A
Please check the suggestions which you feel can improve this documentation:
Improve the overview/introduction
Make it more concise/brief
Improve the Contents
Add more step-by-step procedures/tutorials
Improve the organization
Add more troubleshooting information
Include more figures
Make it less technical
Your
Add more examples
Add more/better quick reference aids
suggestions for
Add more detail
Improve the index
improvement of
this
Other suggestions
documentation __________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
# Please feel free to write any comments on an attached sheet.
If you wish to be contacted regarding your comments, please complete the following:
Name Company
Postcode Address
Telephone E-mail
This page is intentionally blank.
Contents
Chapter 1.......................................................................... 1
Chapter 2.......................................................................... 3
Appendix A ...................................................................255
Abbreviations ...............................................................255
Appendix B ...................................................................259
Figures..........................................................................259
Tables ...........................................................................267
Index ............................................................................269
About This Manual
Purpose
This manual provides procedures and guidelines that support the
operation of the ZXG10 iBSC (V6.20).
Intended Audience
This manual is intended for engineers and technicians who
perform operation activities on the ZXG10 iBSC (V6.20).
Section Summary
Chapter 1, PS Basic Introduces the detailed information about
Measurement (BSC) counters related to PS basic measurement
(BSC).
Chapter 2, PS Basic Introduces the detailed information about
Measurement (Cell) counters related to PS basic measurement
(Cell).
Chapter 3, CPU Load Introduces the detailed information about
Section Summary
Measurement counters related to CPU load
measurement.
Chapter 4, CS Basic Introduces the detailed information about
Measurement counters related to CS basic
measurement.
Appendix A, Lists all the abbreviations used in this
Abbreviations manual.
Appendix B, Figures Lists all the figures and tables used in this
and Tables manual.
Related Documentation
The following documentation is related to this manual:
ZXG10 iBSC (V6.20) Base Station Controller Documentation
Guide
ZXG10 iBSC (V6.20) Base Station Controller Technical
Manual
ZXG10 iBSC (V6.20) Base Station Controller Hardware
Manual
ZXG10 iBSC (V6.20) Base Station Controller Installation
Manual
ZXG10 iBSC (V6.20) Base Station Controller Performance
Counters Manual – Volume II
ZXG10 iBSC (V6.20) Base Station Controller Performance
Counters Manual – Volume III
ZXG10 iBSC (V6.20) Base Station Controller Performance
Counters Manual – Volume IV
ZXG10 iBSC (V6.20) Base Station Controller Performance
Counters Manual – Volume V
ZXG10 iBSC (V6.20) Base Station Controller KPI Reference
Manual
ZXG10 iBSC (V6.20) Base Station Controller Maintenance
Manual (Routine Maintenance)
ZXG10 iBSC (V6.20) Base Station Controller Maintenance
Manual (Troubleshooting)
ZXG10 iBSC (V6.20) Base Station Controller Maintenance
Manual (Emergency Maintenance)
ZXG10 BSS (V6.20) Base Station Subsystem Alarm Handling
Manual
Conventions
Typographical ZTE documents employ the following typographical conventions.
Conventions
TABLE 2 - TYPOGRAPHIC AL CONVENTIONS
Typeface Meaning
Italics References to other Manuals and documents.
“Quotes” Links on screens.
Bold Menus, menu options, function names, input
fields, radio button names, check boxes, drop-
down lists, dialog box names, window names.
CAPS Keys on the keyboard and buttons on screens
and company name.
Constant width Text that you type, program code, files and
directory names, and function names.
[] Optional parameters.
{} Mandatory parameters.
| Select one of the parameters that are delimited
by it.
Note: Provides additional information about a
certain topic.
Checkpoint: Indicates that a particular step needs
to be checked before proceeding further.
Tip: Indicates a suggestion or hint to make things
easier or more productive for the reader.
Hazardous substances
Names of Parts
Pb Hg Cd Cr(VI) PBB’s PBDE’s
System × 0 0 0 0 0
Cables and Assembly 0 0 0 0 0 0
Auxiliary Equipment × × × × × ×
Table Explanation:
0: The usage of the substance in all of the components is less
than the allowed values given by 2002/95/EC standard.
×: The usage of the substance in at least one of the components
is beyond the allowed values given by 2002/95/EC standard.
PS Basic Measurement
(BSC)
Overview
PS basic measurement (BSC) consists of statistic of the number
of bytes received from data link and bytes sent to data link.
The measurement takes BSC as the statistics unit.
C900030001
Definition Number of bytes received from data link
Description This counter counts the total number of bytes received from all
BRCHs on FR sub-layer.
Usage This counter is used to find out the bytes received from BRCH
and to observe BSC load status.
Measurement FR accumulates all the bytes received from Gb interface BRCH.
Point
C900030002
Definition Number of bytes sent to data link
Description This counter counts the total number of bytes sent from all
BRCHs on FR sub-layer.
Usage This counter is used to find out the bytes sent from BRCH and to
observe BSC load status.
Measurement FR accumulates all the bytes sent from Gb interface BRCH.
Point
PS Basic Measurement
(Cell)
Overview
PS basic measurement (Cell) involves the ordinary counters
used to measure the PS service performance and status, such as
the uplink (UL) /downlink (DL) TBF counter, the flow counter,
the UL/DL PACCH counter, the UL/DL RLC counter, the UL/DL
GPRS data counter, the UL/DL EGPRS data counter, and the PS
resource counter.
The measurement takes cell as the statistics unit.
C900040001
Definition Number of GPRS DL TBF establishment success on PACCH
Description This counter counts the number of successful DL GPRS TBF
establishments on the UL/DL GPRS TBF PACCH.
Measurement When the DL GPRS TBF is established on the UL/DL GPRS TBF
Point PACCH and a message indicating assignment success is sent,
this counter increments. The measurement points are A as
shown in Figure 1 and Figure 2, and A2 as shown in Figure 3.
MS BSC SGSN
LLC Frame
RLC Block
LLC Frame
RLC Block
RLC Block(FBI=1)
Start T3193
LLC Frame
Packet Downlink Assignment
A
MS BSC SGSN
RLC Block
RLC Block
LLC Frame
Packet Downlink Assignment
(Packet Timeslot Reconfigure)
A
RLC Block
A1
Downlink Assign Request
Packet Downlink Assignment Resource Assignment
(Packet Timeslot Reconfigure)
A2
C900040002
Definition Number of GPRS DL TBF release due to N3105 overflow
Description During the DL TBF transmission, the DL block RRBP bit is set to
ask MS to respond with a Packet Downlink Ack/Nack message.
If the specified block of BSC fails to receive response from MS,
then the N3105 counter increments; otherwise, it has a clear. If
no response comes from the MS, then the RRBP bit is set again
to ask MS to respond with a Packet Downlink Ack/Nack
message; if the N3105 counter reaches its maximum value, it is
considered that the radio transmission fails and the DL TBF is
released abnormally.
Measurement When the N3105 counter value exceeds N3105Max, this counter
Point increments. The measurement point is A1, as shown in Figure 4.
BSC user
MS
plane
RLC/MAC Block(RRBP)
DOWNLINK ACK
N3105=0
DOWNLINK ACK LOSS
A1
C900040003
Definition Number of GPRS DL TBF release due to other reasons
Description When BSC is transmitting the last DL TBF RLC block, set FBI to 1,
set RRBP to ask the MS to respond with a Packet Downlink
Ack/Nack message, and at the same time, activate T3191. If the
specified block receives the MS response, then T3191 will stop
and the DL transmission ends normally. If T3191 overflows, then
it is considered that the radio transmission fails and the DL TBF
is released abnormally.
Measurement The measurement point is A1, as shown in Figure 5.
Point
FIGURE 5 – MEASUREMENT POINT OF NUMBER OF GPRS DL TBF RELEASE
DUE TO OTHER REASONS
MS BSC
RLC Block
Start T3191
DOWNLINK ACK
Normal release
T3191 Timeout
A1
C900040004
Definition Number of GPRS DL TBF forcing release by control plane
C900040005
Definition Number of GPRS DL TBF release due to instance suspension
Description When the user plane is transmitting the DL TBF, at least one
block must be transmitted in every 5 seconds. After a DL TBF
block is transmitted, BSC will start or restart a 5-second DL
block assigning timer. If the timer expires, it is considered that
the user plane has an instance suspension and the DL TBF is
released abnormally.
Measurement When the DL block assigning timer expires, this counter
Point increments. The measurement point is A, as shown in Figure 7.
C900040006
Definition Number of GPRS DL TBF release due to inner abnormal
Description When the user plane is transmitting the DL TBF, if the message
fails to be sent at the radio interface, the RLC instance fails to be
created, or the resource reassignment fails, the DL TBF will be
released abnormally.
Measurement During the DL TBF transmission, if the message fails to be sent
Point at the radio interface, the RLC instance fails to be created, or the
resource reassignment fails, this counter increments.
C900040007
Definition Number of GPRS DL signaling TBF establishment
Description According to the type of the transmitted UL data, TBF has two
categories: signaling TBF and data TBF.
This counter counts the number of establishments of GPRS DL
TBF for UL signaling transmission. The UL signaling involves
some UL processes such as ATTACH, PDP activation, and routing
area update.
Measurement When the DL TBF is created successfully and the TBF type is
Point GPRS signaling TBF, the counter increments. The measurement
point is similar to those of C900040001 and C901000014.
C900040008
Definition Number of GPRS DL data TBF establishment
Description According to the type of the transmitted UL data, TBF has two
categories: signaling TBF and data TBF.
This counter counts the number of establishments of GPRS DL
TBF for user data (no-UL-signaling) transmission.
Measurement When the DL TBF is created successfully and the TBF type is
Point GPRS data TBF, the counter increments. The measurement point
is similar to those of C900040001 and C901000014.
C900040009
Definition Number of EGPRS DL TBF establishment success on PACCH
Description This counter counts the number of successful DL EGPRS TBF
establishments on the UL/DL EGPRS TBF PACCH.
Measurement When the DL EGPRS TBF is established on the UL/DL EGPRS TBF
Point PACCH and a message indicating assignment success is sent,
this counter increments. The measurement points are A as
shown in Figure 1 and Figure 2, and A2 as shown in Figure 3.
C900040010
Definition Number of EGPRS DL TBF release due to N3105 overflow
Description During the DL TBF transmission, the DL block RRBP bit is set
to ask the MS to respond with a Packet Downlink Ack/Nack
message.
If the specified block of BSC does not receive the MS response,
then the N3105 counter increments; if it does, then it has a
clear; if no response comes from the MS, then the RRBP bit is
set again to ask the MS to respond with a Packet Downlink
Ack/Nack message; if the N3105 counter reaches its maximum
value, it is considered that the radio transmission fails and the
DL TBF is released abnormally.
Measurement When the N3105 counter value exceeds N3105Max, this counter
Point increments. The measurement point is A1, as shown in Figure 8.
C900040011
Definition Number of EGPRS DL TBF release due to other reasons
Description When BSC is transmitting the last DL TBF RLC block, set FBI to 1,
set RRBP to ask the MS to respond with a Packet Downlink
Ack/Nack message, and at the same time, activate T3191. If the
specified block receives the MS response, then T3191 will stop
and the DL transmission ends normally. If T3191 overflows, then
it is considered that the radio transmission fails and the DL TBF
is released abnormally.
Measurement The measurement point is A1, as shown in Figure 9.
Point
FIGURE 9 – MEASUREMENT POINT OF NUMBER OF EGPRS DL TBF RELEASE
DUE TO OTHER REASONS
MS BSC
RLC Block
Start T3191
DOWNLINK ACK
Normal release
T3191 Timeout
A1
Unit Times
C900040012
Definition Number of EGPRS DL TBF forcing release by control plane
Description When the user plane is transmitting the DL TBF, if a release
request comes from the control plane, then the DL TBF will stop
and be released abnormally.
Measurement When the user plane receives the release request from the
Point control plane, this counter increments. The measurement point
is A, as shown in Figure 10.
Unit Times
C900040013
Definition Number of EGPRS DL TBF release due to instance suspension
Description When the user plane is transmitting the DL TBF, at least one
block must be transmitted in every 5 seconds. After a DL TBF
block is transmitted, BSC will start or restart a 5-second DL
block assigning timer. If the timer expires, it is considered that
the user plane has an instance suspension and the DL TBF is
released abnormally.
Measurement When the DL block assigning timer expires, this counter
Point increments. The measurement point is A1, as shown in Figure 11.
Unit Times
C900040014
Definition Number of EGPRS DL TBF release due to inner abnormal
Description When the user plane is transmitting the DL TBF, if the message
fails to be sent at the radio interface, the RLC instance fails to be
created, or the resource reassignment fails, the DL TBF will be
released abnormally.
Measurement During the DL TBF transmission, if the message fails to be sent
Point at the radio interface, the RLC instance fails to be created, or the
resource reassignment fails, this counter increments.
Unit Times
C900040015
Definition Number of EGPRS DL signaling TBF establishment
Description According to the type of the transmitted UL data, TBF has two
categories: signaling TBF and data TBF.
This counter counts the number of establishments of EGPRS DL
TBF for UL signaling transmission. The UL signaling involves
some UL processes such as ATTACH, PDP activation, and routing
area update.
Measurement When the DL TBF is created successfully and the TBF type is
Point signaling TBF, the counter increments. The measurement point
is similar to those of C900040001 and C901000014.
Unit Times
C900040016
Definition Number of EGPRS DL data TBF establishment
Description According to the type of the transmitted UL data, TBF has two
categories: signaling TBF and data TBF.
This counter counts the number of establishments of EGPRS DL
TBF for user data (no-UL-signaling) transmission.
Measurement When the DL TBF is created successfully and the TBF type is
Point data TBF, the counter increments. The measurement point is
similar to those of C900040001 and C901000014.
Unit Times
C900040017
Definition Average number of GPRS DL TBF simultaneous establishment
Description This counter counts the average number of DL GPRS TBF
establishments in a cell.
Measurement The counter acquires the measurement value regularly. The
Point number of GPRS TBFs existing in the cell is considered the
average number.
Unit Times
C900040018
Definition Average number of EGPRS DL TBF simultaneous establishment
Description This counter counts the average number of DL EGPRS TBF
establishments in a cell.
Measurement The counter acquires the measurement value regularly. The
Point number of EGPRS TBFs existing in the cell is considered the
average number.
Unit Times
C900040019
Definition Number of GPRS UL data TBF establishment success on PACCH
Description When MS has a DL TBF and the TBF is being transmitted, if the
UL data need to be transmitted but there is no corresponding UL
TBF, then the Packet Downlink Ack message will carry the UL
TBF establishment request. Usually BSS will assign the resource
to MS, and then an UL TBF is established successfully.
Unit Times
C900040020
Definition Number of GPRS UL TBF release due to N3101 overflow
Description After the UL TBF is established, MS will transmit data on the
BSS-assigned UL block. If the specified block of BSS fails to
receive RLC block from MS, N3101 increments. Otherwise,
N3101 will have a clear. When N3101 exceeds the maximum
value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of GPRS UL
TBF due to N3101 overflow.
Measurement The measurement point is N3101 overflow, as A shown in Figure
Point 13.
Unit Times
C900040021
Definition Number of GPRS UL TBF release due to N3103 overflow
Description When BSS receives all UL RLC blocks, it will send MS a Packet
Uplink Ack message in which FAI and RRBP are set. MS will
report Packet Control Ack to the corresponding UL block. If
BSS fails to receive it, N3103 increments. When N3103 exceeds
the maximum value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of GPRS UL
TBF due to N3103 overflow.
Measurement The measurement point is N3103 overflow, as A shown in Figure
Point 14.
Unit Times
C900040022
Definition Number of GPRS UL TBF forcing release by control plane
Description When an UL TBF establishment is held, the control plane may
forcibly release this UL TBF.
Usage The counter counts the number of forced releases of GPRS UL
TBF due to release request from the control plane.
Measurement The measurement point is arrival of the release request, as A
Point shown in Figure 15.
Unit Times
C900040023
Definition Number of GPRS UL TBF release due to instance suspension
Description BSS creates an instance for an UL TBF. If the instance is
suspended for some reason, then BSS should release this UL
TBF.
Usage The counter counts the number of abnormal releases of GPRS UL
TBF due to suspension of the instance.
Measurement The measurement point is that UPPB detects suspension of the
Point instance, as A shown in Figure 16.
Unit Times
C900040024
Definition Number of GPRS UL TBF release due to inner abnormal
Description TBF is abnormally released due to UPPB internal error.
Usage The counter counts the number of abnormal releases of GPRS UL
TBF due to internal error.
Measurement The measurement point is abnormal UPPB suspension, as B
Point shown in Figure 16.
Unit Times
C900040025
Definition Number of GPRS UL signaling TBF establishment
Description For different purpose, MS may establish two types of TBF:
signaling TBF and data TBF.
Usage The counter counts the number of GPRS UL signaling TBF link
establishments.
Measurement The measurement point is that UPPB access type is signaling TBF.
Point For all 1-step accesses, their type is considered signaling TBF, as
A1 shown in Figure 17. For the 2-step accesses, the TBF type is
detected as SIGNAL_TBF, as A1 shown in Figure 18.
MS BSS
Data Block(CV!=0)
Data Block(CV=0)
P_UPLINK_ACK(FAI=1)
P_CTRL_ACK
A2
Unit Times
C900040026
Definition Number of GPRS UL data TBF establishment
Description For different purpose, MS may establish two types of TBF:
signaling TBF and data TBF.
Usage The counter counts the number of GPRS UL data TBF link
establishments.
Measurement The measurement point is when UPPB access type is data TBF.
Point For example, the TBF type is detected as DATA_TBF, as A1
shown in Figure 18.
Unit Times
C900040027
Definition Number of EGPRS UL TBF establishment success on PACCH
Description When MS has a DL TBF and the TBF is being transmitted, if the
UL data need to be transmitted but there is no corresponding UL
TBF, then the Packet Downlink Ack message will carry the UL
TBF establishment request. Usually BSS will assign the resource
to MS, and then an UL TBF is established successfully.
Usage The counter counts the number of successful EGPRS UL TBF
establishments on PACCH
Measurement The measurement point is A, as shown in Figure 19.
Point
FIGURE 19 - MEASUREMENT POINT OF NUMBER OF EGPRS UL TBF
ESTABLISHM ENT SUCCESS ON P ACCH
Unit Times
C900040028
Definition Number of EGPRS UL TBF release due to N3101 overflow
Description After the UL TBF is established, MS will transmit data on the
BSS-assigned UL block. If the specified block of BSS fails to
receive RLC block from MS, N3101 increments. Otherwise,
N3101 will have a clear. When N3101 exceeds the maximum
value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of EGPRS
UL TBF due to N3101 overflow.
Measurement The measurement point is when N3101 overflow.
Point
Unit Times
C900040029
Definition Number of EGPRS UL TBF release due to N3103 overflow
Description When BSS receives all UL RLC blocks, it will send MS a Packet
Uplink Ack message in which FAI and RRBP are set. MS will
C900040030
Definition Number of EGPRS UL TBF forcing release by control plane
Description When an UL TBF establishment is held, the control plane may
forcibly release this UL TBF.
Usage The counter counts the number of forced releases of EGPRS UL
TBF due to release request from the control plane.
Measurement The measurement point is arrival of the release request.
Point
Unit Times
C900040031
Definition Number of EGPRS UL TBF release due to instance suspension
Description BSS creates an instance for an UL TBF. If the instance is
suspended for some reason, then BSS should release this UL
TBF.
Usage The counter counts the number of abnormal releases of EGPRS
UL TBF due to suspension of the instance.
Measurement The measurement point is that UPPB detects suspension of the
Point instance.
Unit Times
C900040032
Definition Number of EGPRS UL TBF release due to inner abnormal
Description TBF is abnormally released due to UPPB internal error.
Usage The counter counts the number of abnormal releases of EGPRS
UL TBF due to internal error.
Unit Times
C900040033
Definition Number of EGPRS UL signaling TBF establishment
Description For different purpose, MS may establish two types of TBF:
signaling TBF and data TBF.
Usage The counter counts the number of EGPRS UL signaling TBF link
establishments.
Measurement The measurement point is that UPPB access type is signaling TBF.
Point
Unit Times
C900040034
Definition Number of EGPRS UL data TBF establishment
Description For different purpose, MS may establish two types of TBF:
signaling TBF and data TBF.
Usage The counter counts the number of EGPRS UL data TBF link
establishments.
Measurement The measurement point is that UPPB access type is data TBF.
Point
Unit Times
C900040035
Definition Average number of GPRS UL TBF simultaneous establishment
Description There may be more than one TBF in the system during the
sampling period. Average number of uplink GPRS TBF
establishing simultaneously = Number of UL GPRS TBFs
established simultaneously in the sampling period / Times of
sampling
Usage This counter counts the average number of UL GPRS TBF
establishing simultaneously.
Measurement When UPPB receives the message informing UL GPRS TBF
Point establishment, the number of TBFs is refreshed and the times of
sampling accumulates.
Unit Times
C900040036
Definition Average number of EGPRS UL TBF simultaneous establishment
Description There may be more than one TBF in the system during the
sampling period. Average number of uplink EGPRS TBF
establishing simultaneously = Number of UL EGPRS TBFs
established simultaneously in the sampling period / Times of
sampling
Usage This counter counts the average number of UL EGPRS TBF
establishing simultaneously.
Measurement When UPPB receives the message informing UL EGPRS TBF
Point establishment, the number of TBFs is refreshed and the times of
sampling accumulates.
Unit Times
C900040037
Definition Number of GPRS UL signaling TBF release due to N3101 overflow
Description After the UL TBF is established, MS will transmit data on the
BSS-assigned UL block. If the specified block of BSS fails to
receive RLC block from MS, N3101 increments. Otherwise,
N3101 will have a clear. When N3101 exceeds the maximum
value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of GPRS
signaling UL TBF due to N3101 overflow.
Measurement The measurement point is N3101 overflow.
Point
Unit Times
C900040038
Definition Number of GPRS UL signaling TBF release due to N3103 overflow
Description When BSS receives all UL RLC blocks, it will send MS a Packet
Uplink Ack message in which FAI and RRBP are set. MS will
report Packet Control Ack to the corresponding UL block. If
BSS fails to receive it, N3103 increments. When N3103 exceeds
the maximum value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of GPRS
signaling UL TBF due to N3103 overflow.
Measurement The measurement point is N3103 overflow.
Point
Unit Times
C900040039
Definition Number of GPRS UL signaling TBF forcing release by control
plane
Description When an UL TBF establishment is held, the control plane may
forcibly release this UL TBF.
Usage The counter counts the number of forced releases of GPRS
signaling UL TBF due to release request from the control plane.
Measurement The measurement point is arrival of the release request.
Point
Unit Times
C900040040
Definition Number of GPRS UL signaling TBF release due to instance
suspension
Description BSS creates an instance for an UL TBF. If the instance is
suspended for some reason, then BSS should release this UL
TBF.
Usage The counter counts the number of abnormal releases of GPRS
signaling UL TBF due to suspension of the instance.
Measurement The measurement point is that UPPB detects suspension of the
Point instance.
Unit Times
C900040041
Definition Number of GPRS UL signaling TBF release due to inner abnormal
Description TBF is abnormally released due to UPPB internal error.
Usage The counter counts the number of abnormal releases of GPRS
signaling UL TBF due to internal error.
Measurement The measurement point is abnormal UPPB suspension.
Point
Unit Times
C900040042
Definition Number of EGPRS UL signaling TBF release due to N3101
overflow
Description After the UL TBF is established, MS will transmit data on the
BSS-assigned UL block. If the specified block of BSS fails to
receive RLC block from MS, N3101 increments. Otherwise,
N3101 will have a clear. When N3101 exceeds the maximum
value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of EGPRS
signaling UL TBF due to N3101 overflow.
Measurement The measurement point is N3101 overflow.
Point
Unit Times
C900040043
Definition Number of EGPRS UL signaling TBF release due to N3103
overflow
Description When BSS receives all UL RLC blocks, it will send MS a Packet
Uplink Ack message in which FAI and RRBP are set. MS will
report Packet Control Ack to the corresponding UL block. If
BSS fails to receive it, N3103 increments. When N3103 exceeds
the maximum value, BSS will release UL TBF.
Usage The counter counts the number of abnormal releases of EGPRS
signaling UL TBF due to N3103 overflow.
Measurement The measurement point is N3103 overflow.
Point
Unit Times
C900040044
Definition Number of EGPRS UL signaling TBF forcing release by control
plane
Description When an UL TBF establishment is held, the control plane may
forcibly release this UL TBF.
Usage The counter counts the number of forced releases of EGPRS
signaling UL TBF due to release request from the control plane.
Measurement The measurement point is arrival of the release request.
Point
Unit Times
C900040045
Definition Number of EGPRS UL signaling TBF release due to instance
suspension
Description BSS creates an instance for an UL TBF. If the instance is
suspended for some reason, then BSS should release this UL
TBF.
Usage The counter counts the number of abnormal releases of EGPRS
signaling UL TBF due to suspension of the instance.
Measurement The measurement point is that UPPB detects suspension of the
Point instance.
Unit Times
C900040046
Definition Number of EGPRS UL signaling TBF release due to inner
abnormal
Description TBF is abnormally released due to UPPB internal error.
Usage The counter counts the number of abnormal releases of EGPRS
signaling UL TBF due to internal error.
Measurement The measurement point is abnormal UPPB suspension.
Point
Unit Times
C900040047
Definition Number of EGPRS DL LLC frames
Description The DL GIPB sends DL UnitData to UPPB through IP packets.
tQoSProfile Tbit in DL UnitData identifies whether data or
signaling is transmitted. UPPB applies to CMP to establish DL TBF
(radio access capacity to carry MS) and according to the CMP
request, establishes EGPRS/GPRS TBF.
Usage The counter counts the number of EGPRS DL LLC frames.
Measurement The measurement point is A, as shown in Figure 20.
Point
Unit Times
C900040048
Definition Number of discarded EGPRS DL LLC frames due to buffer
overflow
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to acquire buffer, then it will send the LLC Discard
message to SGSN.
Usage The counter counts the number of discarded EGPRS DL LLC
frames due to buffer overflow.
Measurement The measurement point is A, as shown in Figure 21.
Point
FIGURE 21 - MEASUREMENT POINT OF NUMBER OF DISCARDED EGPRS DL
LLC FRAMES DUE TO BUFFER OVERFLOW
Unit Times
C900040049
Definition Number of discarded EGPRS DL LLC frames due to life time
expiration
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them before the LLC frame life time expires,
then it will send the LLC Discard message to SGSN.
Usage
Unit Times
C900040050
Definition Number of discarded EGPRS DL LLC frames due to other reasons
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them for reasons other than the above two in
C900040048 and C900040049, then it will send the LLC
Discard message to SGSN.
Usage The counter counts the number of discarded EGPRS DL LLC
frames due to other reasons than the above two in C900040048
and C900040049.
Measurement The measurement point is A, as shown in Figure 23.
Point
FIGURE 23 - MEASUREMENT POINT OF NUMBER OF DISCARDED EGPRS DL
LLC FRAMES DUE TO OTHER REASONS
Unit Times
C900040051
Definition Number of DL signaling LLC frames
Unit Times
C900040052
Definition Number of discarded EGPRS DL signaling LLC frames due to
buffer overflow
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to acquire buffer, then it will send the LLC Discard
message to SGSN.
Usage The counter counts the number of discarded EGPRS DL signaling
LLC frames due to buffer overflow.
Measurement The measurement point is A, as shown in Figure 25.
Point
Unit Times
C900040053
Definition Number of discarded EGPRS DL signaling LLC frames due to life
time expiration
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them before the LLC frame life time expires,
then it will send the LLC Discard message to SGSN.
Usage The counter counts the number of discarded EGPRS DL signaling
LLC frames due to life time expiration.
Measurement The measurement point is A, as shown in Figure 26.
Point
FIGURE 26 - MEASUREMENT POINT OF NUMBER OF DISCARDED EGPRS DL
SIGNALING LLC FRAMES DUE TO LIFE TIME EXPIRATION
Unit Times
C900040054
Definition Number of discarded EGPRS DL signaling LLC frames due to
other reasons
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them for reasons other than the above two in
C900040052 and C900040053, then it will send the LLC
Discard message to SGSN.
Usage The counter counts the number of discarded EGPRS DL signaling
LLC frames due to other reasons than the above two in
C900040052 and C900040053.
Measurement The measurement point is A, as shown in Figure 27.
Point
Unit Times
C900040055
Definition Number of data blocks transmitted according to given Abis
bandwidth
Description Because the bandwidth carrying the Abis-interface (TS) timeslot
is limited, PS may need 1 or more Abis TSs for specific RLC
coding modes. If the number of Abis TSs bond to the channel is
definite, the RLC coding mode is also definite for the channel.
Usage The counter counts the number of data blocks transmitted
according to given Abis bandwidth.
Measurement During the DL PCU frame transmission, if the number of Abis
Point TSs required by the coding mode equals that of Abis TSs bond to
the channel, the counter increments.
Unit Times
C900040056
Definition Bytes of effective upper layer protocol data sent on DL PDCH
Description UPPB divides the DL LLC frame into RLC blocks and sends them
to MS. After correctly receiving those RLC blocks, MS will
recompose the LLC frame. UPPB acquires the information about
MS reception by setting RRBP to let MS report the Packet
Downlink Ack / EGPRS Packet Downlink Ack message.
Usage The counter counts the bytes of effective upper layer protocol
data sent on DL PDCH.
Measurement The measurement point is A, as shown in Figure 28.
Point
MS BSS
downlink RLC blocks & not setting RRBP
A
Unit Byte
C900040057
Definition Bytes of effective upper layer protocol data received on UL PDCH
Description After receiving the RLC blocks reported by MS, UPPB composes
them into the LLC frame and sends it to SGSN. At same time,
UPPB sends the Packet Uplink Ack message to MS by a certain
rule.
Usage The counter counts the bytes of effective upper layer protocol
data received on UL PDCH.
Measurement The measurement point is A, as shown in Figure 29.
Point
FIGURE 29 - MEASUREMENT POINT OF TOTAL BYTES OF EFFECTIVE UPPER
LAYER PROTOCOL DAT A RECEIVED ON UL PDCH
Unit Byte
C900040058
Definition Bytes of LLC frame on GPRS UL data TBF
Description After receiving the RLC blocks reported by MS, UPPB composes
them into the LLC frame and sends it to SGSN. At same time,
UPPB sends the Packet Uplink Ack message to MS by a certain
rule.
Usage The counter counts the bytes carried by GPRS UL data TBF LLC
frame.
Unit Byte
C900040059
Definition Duration of GPRS UL data TBF
Description The duration starts when BSS receives the UL access from MS
and ends when BSS receives the data block (CV=0) and all the
other blocks have arrived.
Usage The counter counts the duration of GPRS UL data TBF.
Measurement The duration lasts from UPPB’s reception of UL TBF
Point establishment request to transmission of Packet Uplink Ack
with FAI set. The measurement point is A, as shown in Figure 31.
Unit Ms
C900040060
Definition Bytes of LLC frame on GPRS DL data TBF
Description UPPB divides the DL LLC frame into RLC blocks and sends them
to MS. Besides. UPPB sets RRBP by a certain rule. Then MS
Unit Byte
C900040061
Definition Duration of GPRS DL data TBF
Description The duration lasts from BSS’s reception of the UL TBF
establishment request to its reception of Packet Downlink
Ack/EGPRS Packet Downlink Ack (Packet Control Ack in non-
reply mode) with FAI=1 sent from MS.
Usage The counter counts the duration of GPRS DL data TBF.
Measurement The measurement point is A, as shown in Figure 33.
Point
FIGURE 33 - MEASUREMENT POINT OF DURATION OF GPRS DL DATA TBF
Unit Ms
C900040062
Definition Number of effective data blocks received on GPRS UL TBF
Description During the TBF transmission, MS divides the UL LLC frame into
RLC blocks and sends them to BSS. Only when BSS receives all
these RLC blocks can it recompose the LLC frame.
Usage The counter counts the number of effective data blocks received
on GPRS UL TBF
Measurement The measurement point is A, as shown in Figure 34.
Point
FIGURE 34 - MEASUREMENT POINT OF NUMBER OF EFFECTIVE DATA BLOCKS
RECEIVED ON GPRS UL TBF
Unit Times
C900040063
Definition Number of NACK blocks received on GPRS UL TBF
Description During the TBF transmission, MS divides the UL LLC frame into
RLC blocks and sends them to BSS. Only when BSS correctly
receives all these RLC blocks can it recompose the LLC frame.
BBS informs MS of the RLC block reception through Packet
Uplink Ack. For the reply mode, if any RLC block is lost, MS
should transmit again.
Usage The counter counts the number of NACK blocks received on
GPRS UL TBF
Measurement Then counter increments when BSS correctly receives a NACK
Point block. The measurement point is A, as shown in Figure 35.
Unit Times
C900040064
Definition Number of effective data blocks sent on GPRS DL TBF
Description During the TBF transmission, BSS divides the UL LLC frame into
RLC blocks and sends them to MS. Only when MS correctly
receives all these RLC blocks can it recompose the LLC frame.
MS informs BSS of the RLC block reception through Packet
DownLink Ack/EGPRS Packet Downlink Ack.
Usage The counter counts the number of effective data blocks sent on
GPRS DL TBF
Measurement Then counter increments when Packet DownLink Ack/EGPRS
Point Packet Downlink Ack indicates that MS have correctly received
the RLC block. The measurement point is A1, as shown in Figure
36.
MS BSC SGSN
LLC Frame
RLC Block
A1
Packet Downlink Ack
Bitmap indicates some data
blocks fail to arrive
RLC Block(NACK)
A2
LLC Frame
RLC Block
Unit Times
C900040065
Definition Number of NACK blocks sent on GPRS DL TBF
Description During the TBF transmission, BSS divides the UL LLC frame into
RLC blocks and sends them to MS. Only when MS correctly
receives all these RLC blocks can it recompose the LLC frame.
MS informs BSS of the RLC block reception through Packet
DownLink Ack/EGPRS Packet Downlink Ack.
Usage The counter counts the number of NACK blocks sent on GPRS DL
TBF.
Measurement Then counter increments when Packet DownLink Ack/EGPRS
Point Packet Downlink Ack indicates that MS fails to receive the RLC
block. The measurement point is A2, as shown in Figure 37.
MS BSC SGSN
LLC Frame
RLC Block
A1
Packet Downlink Ack
Bitmap indicates some data
blocks fail to arrive
RLC Block(NACK)
A2
LLC Frame
RLC Block
Unit Times
C900040066
Definition Bytes of LLC frame on EGPRS UL data TBF
Description After receiving the RLC blocks reported by MS, UPPB composes
them into the LLC frame and sends it to SGSN. At same time,
UPPB sends the Packet Uplink Ack message to MS by a certain
rule.
Usage The counter counts the bytes of LLC frame on EGPRS UL data
TBF.
Measurement The measurement point is A, as shown in Figure 38.
Point
Unit Byte
C900040067
Definition Duration of EGPRS UL data TBF
Description The duration starts when BSS receives the UL access from MS
and ends when BSS receives the data block (CV=0) and all the
other blocks have arrived.
Usage The counter counts the duration of EGPRS UL data TBF.
Measurement The duration lasts from UPPB’s reception of UL TBF
Point establishment request to transmission of Packet Uplink Ack
with FAI set. The measurement point is A, as shown in Figure 39.
Unit Ms
C900040068
Definition Bytes of LLC frame on EGPRS DL data TBF
Description UPPB divides the DL LLC frame into RLC blocks and sends them
to MS. Besides. UPPB sets RRBP by a certain rule. Then MS
reports Packet Downlink Ack/EGPRS Packet Downlink Ack in
the specific UL block.
Usage The counter counts the bytes of LLC frame on EGPRS DL data
TBF.
Unit Byte
C900040069
Definition Duration of EGPRS DL data TBF
Description The duration lasts from BSS’s reception of the UL TBF
establishment request to its reception of Packet Downlink
Ack/EGPRS Packet Downlink Ack (Packet Control Ack in non-
reply mode) with FAI=1 sent from MS.
Usage The counter counts the duration of EGPRS DL data TBF.
Measurement The measurement point is A, as shown in Figure 41.
Point
FIGURE 41 - MEASUREMENT POINT OF DURATION OF EGPRS DL DATA TBF
Unit Ms
C900040070
Definition Number of effective data blocks received on EGPRS UL TBF
Description
Unit Times
C900040071
Definition Number of NACK blocks received on EGPRS UL TBF
Description During the TBF transmission, MS divides the UL LLC frame into
RLC blocks and sends them to BSS. Only when BSS correctly
receives all these RLC blocks can it recompose the LLC frame.
BBS informs MS of the RLC block reception through Packet
Uplink Ack. For the reply mode, if any RLC block is lost, MS
should transmit again.
Usage The counter counts the number of NACK blocks received on
EGPRS UL TBF.
Measurement Then counter increments when BSS correctly receives a NACK
Point block. The measurement point is A, as shown in Figure 43.
Unit Times
C900040072
Definition Number of effective data blocks sent on EGPRS DL TBF
Description During the TBF transmission, BSS divides the UL LLC frame into
RLC blocks and sends them to MS. Only when MS correctly
receives all these RLC blocks can it recompose the LLC frame.
MS informs BSS of the RLC block reception through Packet
DownLink Ack/EGPRS Packet Downlink Ack.
Usage The counter counts the number of effective data blocks sent on
EGPRS DL TBF.
Measurement Then counter increments when Packet DownLink Ack/EGPRS
Point Packet Downlink Ack indicates that MS have correctly received
the RLC block. The measurement point is A1, as shown in Figure
44.
MS BSC SGSN
LLC Frame
RLC Block
A1
Packet Downlink Ack
Bitmap indicates some data
blocks fail to arrive
RLC Block(NACK)
A2
LLC Frame
RLC Block
Unit Times
C900040073
Definition Number of NACK blocks sent on EGPRS DL TBF
Description During the TBF transmission, BSS divides the UL LLC frame into
RLC blocks and sends them to MS. Only when MS correctly
receives all these RLC blocks can it recompose the LLC frame.
MS informs BSS of the RLC block reception through Packet
DownLink Ack/EGPRS Packet Downlink Ack.
Usage The counter counts the number of NACK blocks sent on EGPRS
DL TBF.
Measurement
Point
MS BSC SGSN
LLC Frame
RLC Block
A1
Packet Downlink Ack
Bitmap indicates some data
blocks fail to arrive
RLC Block(NACK)
A2
LLC Frame
RLC Block
Unit Times
C900040074
Definition Number of GPRS DL LLC frames
Description The DL GIPB sends DL UnitData to UPPB through IP packets.
tQoSProfile Tbit in DL UnitData identifies whether data or
signaling is transmitted. UPPB applies to CMP to establish DL TBF
(radio access capacity to carry MS) and according to the CMP
request, establishes EGPRS/GPRS TBF.
Usage The counter counts the number of GPRS DL LLC frames.
Measurement The measurement point is A, as shown in Figure 46.
Point
FIGURE 46 - MEASUREMENT POINT OF NUMBER OF GPRS DL LLC FRAMES
Unit Times
C900040075
Definition Number of discarded GPRS DL LLC frames due to buffer overflow
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to acquire buffer, then it will send the LLC Discard
message to SGSN.
Usage The counter counts the number of discarded GPRS DL LLC
frames due to buffer overflow.
Measurement The measurement point is A, as shown in Figure 47.
Point
FIGURE 47 - MEASUREMENT POINT OF NUMBER OF DISCARDED GPRS DL
LLC FRAMES DUE TO BUFFER OVERFLOW
Unit Times
C900040076
Definition Number of discarded GPRS DL LLC frames due to life time
expiration
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them before the LLC frame life time expires,
then it will send the LLC Discard message to SGSN.
Usage The counter counts the number of discarded GPRS DL LLC
frames due to life time expiration.
Measurement The measurement point is A, as shown in Figure 48.
Point
FIGURE 48 - MEASUREMENT POINT OF NUMBER OF DISCARDED GPRS DL
LLC FRAMES DUE TO LIFE TIME EXPIRATION
Unit Times
C900040077
Definition Number of discarded GPRS DL LLC frames due to other reasons
Description The DL GIPB sends DL UnitData to UPPB through IP packets. If
UPPB fails to send them for reasons other than the above two in
C900040075 and C900040076, then it will send the LLC
Discard message to SGSN.
Usage The counter counts the number of discarded GPRS DL LLC
frames due to other reasons than the above two in C900040075
and C900040076.
Measurement The measurement point is A, as shown in Figure 49.
Point
Unit Times
C900040078
Definition Number of DL dummy control blocks on PACCH
Description If there is no other RLC/MAC block available in the network, BSS
will transmit the DUMMY blocks to MS for UL transmission.
The counter counts the number of DL dummy control blocks sent
by BSC on PACCH in the packet transmission mode.
Measurement If the DL control block sent from BTS to MS is a DL Dummy
Point control block, the counter increments. The measurement point is
A, as shown in Figure 50.
MS BSS
Unit Times
C900040079
Definition Number of UL dummy control blocks on PACCH
Description Similar to C900040078, this counter counts the number of UL
dummy control blocks sent by BSC on PACCH in the packet
transmission mode.
Measurement If the DL control block sent from BTS to MS is an UL Dummy
Point control block, the counter increments. The measurement point is
A, as shown in Figure 51.
MS BSS
Unit Times
C900040080
Definition Number of DL RLC blocks on PACCH(excluding dummy block)
Description This counter counts the number of DL RLC blocks expect DUMMY
blocks sent from BSC to MS through BTS on PACCH.
Usage The counter counts the number of DL RLC blocks expect DUMMY
blocks sent by BSC on PACCH.
Measurement
Point
Unit Times
C900040081
Definition Number of DL RLC pending blocks in CS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of CS1.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of CS1.
Measurement When BSC sends a pending RLC block whose coding method is
Point CS1 to MS, the counter increments. The measurement point is A,
as shown in Figure 53.
Unit Times
C900040082
Definition Number of DL RLC pending blocks in CS2 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of CS2.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of CS2.
Measurement When BSC sends a pending RLC block whose coding method is
Point CS2 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040083
Definition Number of DL RLC pending blocks in CS3 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of CS3.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of CS3.
Measurement When BSC sends a pending RLC block whose coding method is
Point CS3 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040084
Definition Number of DL RLC pending blocks in CS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of CS4.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of CS4.
Measurement When BSC sends a pending RLC block whose coding method is
Point CS4 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040085
Definition Number of DL RLC NACK blocks in CS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of CS1.
Unit Times
C900040086
Definition Number of DL RLC NACK blocks in CS2 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of CS2.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of CS2.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is CS2 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 54.
Unit Times
C900040087
Definition Number of DL RLC NACK blocks in CS3 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of CS3.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of CS3.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is CS3 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 54.
Unit Times
C900040088
Definition Number of DL RLC NACK blocks in CS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of CS4.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of CS4.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is CS4 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 54.
Unit Times
C900040089
Definition Number of DL RLC new blocks in CS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
CS1.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of CS1.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of CS1) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040090
Definition Number of DL RLC new blocks in CS2 on PDTCH
Description
C900040091
Definition Number of DL RLC new blocks in CS3 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
CS3.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of CS3.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of CS3) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040092
Definition Number of DL RLC new blocks in CS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
CS4.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of CS4.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of CS4) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040093
Definition Number of UL RLC blocks excluding dummy blocks on PACCH
Description This counter counts the number of UL RLC blocks expect DUMMY
blocks sent from MS to BSC through BTS on PACCH.
Usage The counter counts the number of uplink RLC blocks expect
DUMMY blocks received by BSC on PACCH.
Measurement When BSC receives an UL control block (except the DUMMY
Point block) from MS, the counter increments. The measurement point
is A, as shown in Figure 56.
Unit Times
C900040094
Definition Number of UL RLC pending blocks in CS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS1-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS1-coded pending
RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS1-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
MS BTS BSC
UL pending RLC block
RLC block (coding scheme can be
CS1 ~ CS4, MCS1 ~
MCS9)
A
Unit Times
C900040095
Definition Number of UL RLC pending blocks in CS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS2-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS2-coded pending
RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS2-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040096
Definition Number of UL RLC pending blocks in CS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS3-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS3-coded pending
RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS3-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040097
Definition Number of UL RLC pending blocks in CS4 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS4-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS4-coded pending
RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS4-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040098
Definition Number of UL RLC NACK blocks in CS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS1-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS1-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS1-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040099
Definition Number of UL RLC NACK blocks in CS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS2-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS2-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS2-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040100
Definition Number of UL RLC NACK blocks in CS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040101
Definition Number of UL RLC NACK blocks in CS4 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS4-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS4-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS4-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040102
Definition Number of UL RLC new blocks in CS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS1-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS1-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS1-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040103
Definition Number of UL RLC new blocks in CS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS2-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS2-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS2-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040104
Definition Number of UL RLC new blocks in CS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL CS3-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL CS3-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives CS3-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040105
Definition Number of UL RLC new blocks in CS4 on PDTCH
Description
C900040106
Definition Number of UL data blocks received on PDTCH
Description When MS transmits UL RLC blocks to BSC through BTS, this
counter counts the number of data blocks received by BSC,
including the retransmitted RLC blocks, blocks to be confirmed
and the first-transmitted blocks.
Usage The counter counts the number of data blocks received by UL
PDTCH.
Measurement When MS transmits an UL RLC block to BSC through BTS
Point (including the retransmitted RLC blocks, blocks to be confirmed
and the first-transmitted blocks), this counter increments.
Unit Times
C900040107
Definition Number of DL data blocks sent on PDTCH
Description When BSC transmits DL RLC blocks to BTS, this counter counts
the number of data blocks sent from BSC, including the
retransmitted RLC blocks, blocks to be confirmed and the first-
transmitted blocks.
Usage The counter counts the number of data blocks sent by DL PDTCH.
Measurement When BSC transmits a DL RLC block to BTS (including the
Point retransmitted RLC blocks, blocks to be confirmed and the first-
transmitted blocks), this counter increments.
Unit Times
C900040108
Definition Number of GPRS DL TBF establishment requests
Description
C900040109
Definition Number of GPRS DL TBF establishment failure due to database
allocation failure
Description The counter counts the number of GPRS DL TBF establishment
failure due to database allocation failure.
Usage The counter collects information about the frequency of channel
allocation failures when BSC attempts to establish DL GPRS TBFs.
Measurement This counter increments in the following two cases:
Point
When PS control plane receives the DL TBF establishment
request from PS user plane, it will apply to database for
resources. If it fails to obtain the resources, this counter
increments. The measurement point is A, as shown in Figure
60.
Unit Times
C900040110
Definition Number of GPRS DL TBF resource reallocation requests due to
UL TBF establishment
Description The counter counts the number of GPRS DL TBF resource
reallocation requests due to UL TBF establishment.
Usage The counter collects information about the frequency of GPRS DL
TBF resource reallocation requests.
Measurement When MS has already established a DL GPRS TBF, if PS control
Point plane receives an UL TBF assignment message from PS user
plane, this counter increments. The measurement point is A, as
shown in Figure 62.
PS control
PS user plane plane
UL TBF assignment
Unit Times
C900040111
Definition Number of GPRS DL TBF resource reallocation failure due to UL
TBF establishment
Unit Times
C900040112
Definition Number of GPRS DL TBF resource reallocation requests due to
LLC transmission
Description This counter counts the number of resource reallocation requests
that PS control plane receives from PS user plane caused by
UL/DL LLC frame changes during the DL GPRS TBF transmission.
Usage This counter collects information about the frequency of resource
reallocation requests received by PS control plane during the DL
GPRS TBF transmission.
Measurement When PS control plane receives a resource reallocation request
Point from PS user plane, if the current DL GPRS TBF exists, this
counter increments. The measurement point is A, as shown in
Figure 64.
Unit Times
C900040113
Definition Number of GPRS DL TBF resource reallocation failure due to LLC
transmission
Description During the DL GPRS TBF transmission, because UL/DL LLC frame
changes, PS user plane sends a resource reallocation request to
PS control plane. After receiving the request, PS control plane
applies to database for resources. This counter counts the
number of failed resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the DL GPRS TBF transmission after
PS control plane receives the resource reallocation request and
applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from PS user plane and applies to database for resources, if it
fails to obtain the resources, this counter increments, as A
shown in Figure 65.
Unit Times
C900040114
Definition Number of EGPRS DL TBF establishment requests
Description
C900040115
Definition Number of EGPRS DL TBF establishment failure due to database
allocation failure
Description The counter counts the number of channel allocation failures
when BSC attempts to establish DL EGPRS TBFs and RANPS
applies to database for resources.
Usage The counter collects information about the frequency of channel
allocation failures when BSC attempts to establish DL EGPRS
TBFs and RANPS applies to database for resources.
Measurement This counter increments in the following two cases:
Point
When PS control plane receives the DL TBF establishment
request from PS user plane, it will apply to database for
resources. If it fails to obtain the resources, this counter
increments. The measurement point is A, as shown in Figure
60.
When UL EGPRS TBF exists and DL EGPRS TBF is to be
established, if PS control plane receives the DL TBF
assignment message from PS user plane, it will apply to
database for resources. If it fails to obtain the resources, this
counter increments. The measurement point is A, as shown
in Figure 61.
Unit Times
C900040116
Definition Number of EGPRS DL TBF resource reallocation requests due to
UL TBF establishment
Description
C900040117
Definition Number of EGPRS DL TBF resource reallocation failure due to UL
TBF establishment
Description If MS has already established a DL EGPRS TBF and it needs to
establish an UL TBF on PACCH, PS control plane should apply to
database for resources. The counter counts the number of DL
resource reallocation failures caused by failed UL TBF
establishment allocation.
Usage The counter collects information about the frequency of EGPRS
DL resource reallocation failures caused by failed UL TBF
establishment allocation.
Measurement When MS has already established a DL EGPRS TBF, if PS control
Point plane receives an UL TBF assignment message from PS user
plane, it will apply to database for resources. If it fails to obtain
the resources, this counter increments. The measurement point
is A, as shown in Figure 63.
Unit Times
C900040118
Definition Number of EGPRS DL TBF resource reallocation requests due to
LLC transmission
Description This counter counts the number of resource reallocation requests
that PS control plane receives from PS user plane caused by
UL/DL LLC frame changes during the DL EGPRS TBF
transmission.
Usage This counter collects information about the frequency of resource
reallocation requests received by PS control plane during the DL
EGPRS TBF transmission.
Measurement When PS control plane receives a resource reallocation request
Point from PS user plane, if the current DL EGPRS TBF exists, this
counter increments, as A shown in Figure 64.
Unit Times
C900040119
Definition Number of EGPRS DL TBF resource reallocation failure due to
LLC transmission
Description During the DL EGPRS TBF transmission, because UL/DL LLC
frame changes, PS user plane sends a resource reallocation
request to PS control plane. After receiving the request, PS
control plane applies to database for resources. This counter
counts the number of failed resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the DL EGPRS TBF transmission after
PS control plane receives the resource reallocation request and
applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from PS user plane and applies to database for resources, if it
fails to obtain the resources, this counter increments, as A
shown in Figure 65.
Unit Times
C900040120
Definition Number of GPRS UL TBF establishment requests
Description The counter counts the number of all channel requests when MS
attempts to establish GPRS UL TBFs. It is the sum of CCCH
requests (C901190002), PCCCH requests (C901190004) and
PACCH requests (C901190006).
Usage The counter collects information about the frequency of channel
requests when MS attempts to establish GPRS services.
Measurement This counter increments in the following three cases:
Point
When BSC receives a CCCH request originated by MS, this
counter increments.
When BSC receives a PCCCH request originated by MS, this
counter increments.
When BSC receives a PACCH request originated by MS and
user plane sends a resource request to control plane, this
counter increments.
Unit Times
C900040121
Definition Number of GPRS UL TBF establishment failure due to database
allocation failure
Description The counter counts the number of GPRS UL TBF establishment
channel allocation failures.
Usage The counter collects information about the frequency of channel
allocation failures when the system attempts to establish UL
GPRS TBFs.
Measurement This counter increments in the following three cases:
Point
When PS control plane receives a CCCH request from MS, it
will apply to database for resources. If it fails to obtain the
resources, this counter increments. The measurement point
is A, as shown in Figure 66.
Unit Times
C900040122
Definition Number of GPRS UL TBF resource reallocation requests due to
DL TBF establishment
Description The counter counts the number of RS UL TBF resource
reallocation requests due to DL TBF establishment.
Usage The counter collects information about the frequency of GPRS UL
TBF resource reallocation requests.
Measurement When MS has already established an UL GPRS TBF, if PS control
Point plane receives a DL TBF assignment message from PS user
plane, this counter increments. The measurement point is A, as
shown in Figure 69.
Unit Times
C900040123
Definition Number of GPRS UL TBF resource reallocation failure due to DL
TBF establishment
Description If MS has already established an UL GPRS TBF and it needs to
establish a DL TBF on PACCH, PS control plane should apply to
C900040124
Definition Number of GPRS UL TBF resource reallocation requests due to
LLC transmission
Description This counter counts the number of resource reallocation requests
that PS control plane receives from PS user plane caused by
UL/DL LLC frame changes during the UL GPRS TBF transmission.
Usage This counter collects information about the frequency of resource
reallocation requests received by PS control plane during the UL
GPRS TBF transmission.
Measurement When PS control plane receives a resource reallocation request
Point from PS user plane, if the current UL GPRS TBF exists, this
counter increments. The measurement point is A, as shown in
Figure 64.
Unit Times
C900040125
Definition Number of GPRS UL TBF resource reallocation failure due to LLC
transmission
Description During the UL GPRS TBF transmission, because UL/DL LLC frame
changes, PS user plane sends a resource reallocation request to
PS control plane. After receiving the request, PS control plane
applies to database for resources. This counter counts the
number of failed resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the UL GPRS TBF transmission after
PS control plane receives the resource reallocation request and
applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from PS user plane and applies to database for resources, if it
C900040126
Definition Number of GPRS UL TBF resource reallocation requests for
resource request
Description This counter counts the number of resource allocation requests
that PS control plane receives from MS during the UL GPRS TBF
transmission.
Usage This counter collects information about the frequency of resource
allocation requests received by PS control plane during the UL
GPRS TBF transmission (including 2-step UL access and UL TBF
transmission).
Measurement When PS control plane receives a resource allocation request
Point from PS user plane, this counter increments, as A shown in
Figure 70.
Unit Times
C900040127
Definition Number of GPRS UL TBF resource reallocation failure due to
database allocation failure for resource request
Description During the UL GPRS TBF transmission, after receiving the
resource allocation request from MS, PS control plane applies to
database for resources. This counter counts the number of failed
resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the UL GPRS TBF transmission
(including 2-step UL access and UL TBF transmission) after PS
control plane receives the resource allocation request from MS
and applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from MS and applies to database for resources, if it fails to
Unit Times
C900040128
Definition Number of EGPRS UL TBF establishment requests
Description The counter counts the number of all channel requests when MS
attempts to establish EDGE UL TBFs. It is the sum of CCCH
requests (C901200003), PCCCH requests (C901200005) and
PACCH requests (C901200006).
Usage The counter collects information about the frequency of channel
requests when MS attempts to establish EDGE services.
Measurement This counter increments in the following three cases:
Point
When BSC receives an EDGE CCCH request originated by MS,
this counter increments.
When BSC receives an EDGE PCCCH request originated by
MS, this counter increments.
When BSC receives an EDGE PACCH request originated by
MS and user plane sends a resource request to control plane,
this counter increments.
Unit Times
C900040129
Definition Number of EGPRS UL TBF establishment failure due to database
allocation failure
Description The counter counts the number of EGPRS UL TBF establishment
channel allocation failures.
Usage The counter collects information about the frequency of channel
allocation failures when the system attempts to establish UL
EGPRS TBFs.
C900040130
Definition Number of EGPRS UL TBF resource reallocation requests due to
DL TBF establishment
Description The counter counts the number of EGPRS UL TBF resource
reallocation requests due to DL TBF establishment.
Usage The counter collects information about the frequency of EGPRS
UL TBF resource reallocation requests.
Measurement
When MS has already established an UL EGPRS TBF, if PS control
Point
plane receives a DL TBF assignment message from PS user
plane, this counter increments. The measurement point is A, as
shown in Figure 69.
Unit Times
C900040131
Definition Number of EGPRS UL TBF resource reallocation failure due to DL
TBF establishment
Description
C900040132
Definition Number of EGPRS UL TBF resource reallocation requests due to
LLC transmission
Description This counter counts the number of resource reallocation requests
that PS control plane receives from PS user plane caused by
UL/DL LLC frame changes during the UL EGPRS TBF transmission.
Usage This counter collects information about the frequency of resource
reallocation requests received by PS control plane during the UL
EGPRS TBF transmission.
Measurement When PS control plane receives a resource reallocation request
Point from PS user plane, this counter increments, as A shown in
Figure 64.
Unit Times
C900040133
Definition Number of EGPRS UL TBF resource reallocation failure due to
LLC transmission
Description During the UL EGPRS TBF transmission, because UL/DL LLC
frame changes, PS user plane sends a resource reallocation
request to PS control plane. After receiving the request, PS
control plane applies to database for resources. This counter
counts the number of failed resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the UL EGPRS TBF transmission after
PS control plane receives the resource reallocation request and
applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from PS user plane and applies to database for resources, if it
C900040134
Definition Number of EGPRS UL TBF resource reallocation requests for
resource request
Description This counter counts the number of resource allocation requests
that PS control plane receives from MS during the UL EGPRS TBF
transmission.
Usage This counter collects information about the frequency of resource
allocation requests received by PS control plane during the UL
EGPRS TBF transmission (including 2-step UL access and UL TBF
transmission).
Measurement When PS control plane receives a resource allocation request
Point from PS user plane, this counter increments, as A shown in
Figure 70.
Unit Times
C900040135
Definition Number of EGPRS UL TBF resource reallocation failure due to
database allocation failure
Description During the UL EGPRS TBF transmission, after receiving the
resource allocation request from MS, PS control plane applies to
database for resources. This counter counts the number of failed
resource allocations.
Usage This counter collects information about the frequency of failed
resource allocations during the UL EGPRS TBF transmission
(including 2-step UL access and UL TBF transmission) after PS
control plane receives the resource allocation request from MS
and applies to database for resources.
Measurement After PS control plane receives a resource reallocation request
Point from MS and applies to database for resources, if it fails to
obtain the resources, this counter increments, as A shown in
Figure 71.
Unit Times
C900040136
Definition Number of available PDCH
Description
C900040137
Definition Number of forcing conversation dynamic from PDCH to TCH by
BSC
Description iBSC supports dynamic radio channel function. The counter
records number of times of reclaiming dynamic PDCH in idle
state so as to use them as TCH/F.
Usage This counter is used to find out the busy level and density of PS
service in the serving cell and use it as reference to decide
whether to set static PDCH or not.
Measurement The counter increments when dynamic PDCH is idle and the
Point database starts reclaiming dynamic PDCH.
Unit Times
C900040138
Definition Number of PDCH used by TBF in each cell
Description This counter counts the sum of PDCH used by all TBF in the
serving cell.
Usage This counter is used to find out the condition of multi-timeslot
allocation in the serving cell.
Measurement The counter’s value can be obtained by querying the database
Point when periodic measurement data is reported.
Unit Times
C900040139
Definition Maximum number of used PDCH
Description This counter records the maximum number of used PDCH in a
cell within the measurement period. It reflects the occupancy
and busy level of PDCH.
Usage
This counter is used to find out the busy level of the cell TCH/F
channel. It could be used as a reference for whether to increase
PDCH channel configuration.
Measurement This counter increments in the following three cases:
Point
Request for database
Release database
Report periodic measurement data
Unit Times
C900040140
Definition Average number of used PDCH
Description This counter records the average number of used PDCH in a cell
within the measurement period.
Usage This counter is used to find out the busy level of the cell TCH/F
channel. It could be used as a reference for whether to increase
PDCH channel configuration.
Measurement This counter increments in the following three cases:
Point
Request for database
Release database
Report periodic measurement data
Unit Times
C900040141
Definition Number of GPRS DL TBF establishment requests before T3192
expiration
Description During the running of T3193 of DL GPRS TBF, BSC receives DL
LLC frame again, then it performs DL assignment on PACCH of
the DL TBF.
This counter counts the number of times of establishing new DL
TBF.
Measurement After the DL GPRS TBF transmits all LLC frames and the DL RLC
Point block with FBI = 1, T3193 is started. During T3193 running,
when BSC receives new LLC frame and sends DL assignment,
this counter increments.
The measurement point is A, as shown in Figure 73.
MS BSC SGSN
LLC Frame
RLC Block
LLC Frame
RLC Block
RLC Block(FBI=1)
Start T3193
LLC Frame
Packet Downlink Assignment
A
Unit Times
C900040142
Definition Number of GPRS DL TBF establishment using existing DL TBF
resource
Description When establishing EGPRS DL TBF under UL transmission status,
the user plane needs not to request control plane for DL
resource if having saved DL TBF resource of last time. It uses
the existing resource for DL assignment. This counter records
the number of GPRS DL TBF establishment using existing DL TBF
resource.
Measurement
During the UL GPRS TBF transmission, when BSC receives the
Point
DL LLC frame, it uses the existing resource to establish DL GPRS
TBF. The measurement point is as A, as shown in Figure 74.
MS BSC SGSN
RLC Block
RLC Block
LLC Frame
Packet Downlink Assignment
(Packet Timeslot Reconfigure)
A
RLC Block
Unit Times
C900040143
Definition Number of GPRS DL TBF establishment requests on PACCH
Description Under UL transmission status, it is necessary to establish DL TBF
transmission when user plane receives DL LLC Frame from SGSN.
If user plane has not saved DL TBF resource, then user plane
requests control plane for resource.
This counter counts the number of times of requesting control
plane for resource to establish GPRS DL TBF on PACCH.
Note:
Here, user plane refers to the UPPB of iBSC, and control plane
refers to the CMP of iBSC.
RLC Block
RLC Block
LLC Frame (no record downlink resource)
A1
Downlink Assign Request
Packet Downlink Assignment Resource Assignment
(Packet Timeslot Reconfigure)
A2
Unit Times
C900040144
Definition Number of GPRS DL TBF establishment requests on
CCCH/PCCCH
Description When MS is in packet idle status, after BSC receives DL LLC
frame from SGSN, BSC initiates the process of establishing DL
TBF which is assigned on CCCH or PCCCH. BSC user plane first
sends the request for DL establishment to BSC control plane.
Measurement
Under MS’s packet idle status, when BSC sends the request for
Point
DL resource to BSC control plane after receiving LLC frame from
SGSN, the counter increments.
The measurement point is as A1, as shown in Figure 76.
Unit Times
C900040145
Definition Number of EGPRS DL TBF establishment requests before T3192
expiration
Description During the running of T3193 of DL EGPRS TBF, BSC receives DL
LLC frame again, then it performs DL assignment on PACCH of
the DL TBF.
This counter counts the number of times of establishing new DL
TBF.
Measurement After the DL EGPRS TBF transmits all LLC frames and the DL RLC
Point block with FBI = 1, T3193 is started. During T3193 running,
when BSC receives new LLC frame and sends DL assignment,
this counter increments.
The measurement point is A, as shown in Figure 77.
MS BSC SGSN
LLC Frame
RLC Block
LLC Frame
RLC Block
RLC Block(FBI=1)
Start T3193
LLC Frame
Packet Downlink Assignment
A
Unit Times
C900040146
Definition Number of EGPRS DL TBF establishment using existing DL TBF
resource
Description When establishing EGPRS DL TBF under UL transmission status,
the user plane needs not to request control plane for DL
resource if having saved DL TBF resource of last time. It uses
the existing resource for DL assignment. This counter records
the number of EGPRS DL TBF establishment using existing DL
TBF resource.
Measurement During the UL EGPRS TBF transmission, when BSC receives the
Point DL LLC frame, it uses the existing resource to establish DL GPRS
TBF.
The measurement point is A, as shown in Figure 78.
MS BSC SGSN
RLC Block
RLC Block
LLC Frame
Packet Downlink Assignment
(Packet Timeslot Reconfigure)
A
RLC Block
Unit Times
C900040147
Definition Number of EGPRS DL TBF establishment requests on PACCH
Description Under UL transmission status, it is necessary to establish DL TBF
transmission when user plane receives DL LLC Frame from SGSN.
If user plane has not saved DL TBF resource, then user plane
requests control plane for resource.
This counter counts the number of times of requesting control
plane for resource to establish EGPRS DL TBF on PACCH.
Measurement The measurement point is A1, as shown in Figure 79.
Point
FIGURE 79 –MEASUREMENT POINT OF NUMBER OF GPRS DL TBF
ESTABLISHM ENT REQUESTS ON P ACCH
RLC Block
RLC Block
LLC Frame (no record downlink resource)
A1
Downlink Assign Request
Packet Downlink Assignment Resource Assignment
(Packet Timeslot Reconfigure)
A2
Unit Times
C900040148
Definition Number of EGPRS DL TBF establishment requests on
CCCH/PCCCH
Description When MS is in packet idle status, after BSC receives DL LLC
frame from SGSN, BSC initiates the process of establishing DL
TBF which is assigned on CCCH or PCCCH. BSC user plane first
sends the request for DL establishment to BSC control plane.
Measurement Under MS’s packet idle status, when BSC sends the request for
Point DL resource to BSC control plane after receiving LLC frame from
SGSN, the counter increments. The measurement point is A1, as
shown in Figure 80.
Unit Times
C900040149
Definition Number of GPRS DL signaling TBF release due to N3105
overflow
Description During the GPRS signaling DL TBF transmission, the DL block
RRBP bit is set to ask MS to respond with a Packet Downlink
Ack/Nack message.
If the specified block of BSC fails to receive response from MS,
then the N3105 counter increments; otherwise, it has a clear. If
no response comes from the MS, then the RRBP bit is set again
to ask MS to respond with a Packet Downlink Ack/Nack
message; if the N3105 counter reaches its maximum value, it is
considered that the radio transmission fails and the GPRS
signaling DL TBF is released abnormally.
Measurement When the N3105 counter value exceeds N3105Max, this counter
Point increments. The measurement point is A1, as shown in Figure 81.
Unit Times
C900040150
Definition Number of GPRS DL signaling TBF release due to other reasons
Description When BSC is transmitting the last RLC block of GPRS signaling
DL TBF, set FBI to 1, set RRBP to ask the MS to respond with a
Packet Downlink Ack/Nack message, and at the same time,
activate T3191. If the specified block receives the MS response,
then T3191 will stop and the DL transmission ends normally. If
T3191 overflows, then it is considered that the radio
transmission fails and the GPRS signaling DL TBF is released
abnormally.
Measurement The measurement point is A1, as shown in Figure 82.
Point
FIGURE 82 – MEASUREMENT POINT OF NUMBER OF GPRS DL TBF RELEASE
DUE TO OTHER REASONS
MS BSC
RLC Block
Start T3191
DOWNLINK ACK
Normal release
T3191 Timeout
A1
Unit Times
C900040151
Definition Number of GPRS DL signaling TBF forcing release by control
plane
Description When the user plane is transmitting the GPRS signaling DL TBF,
if a release request comes from the control plane, then the GPRS
signaling DL TBF will stop and be released abnormally.
Measurement When the user plane receives the release request from the
Point control plane, this counter increments. The measurement point
is A, as shown in Figure 83.
Unit Times
C900040152
Definition Number of GPRS DL signaling TBF release due to instance
suspension
Description When the user plane is transmitting the GPRS signaling DL TBF,
at least one block must be transmitted in every 5 seconds. After
a DL TBF block is transmitted, BSC will start or restart a 5-
second DL block assigning timer. If the timer expires, it is
considered that the user plane has an instance suspension and
the GPRS signaling DL TBF is released abnormally.
Measurement When the DL block assigning timer expires, this counter
Point increments. The measurement point is A, as shown in Figure 84.
Unit Times
C900040153
Definition Number of GPRS DL signaling TBF release due to inner abnormal
Description When the user plane is transmitting the GPRS signaling DL TBF,
if the message fails to be sent at the radio interface, the RLC
instance fails to be created, or the resource reassignment fails,
the GPRS signaling DL TBF will be released abnormally.
Measurement During the transmission of GPRS signaling DL TBF, if the
Point message fails to be sent at the radio interface, the RLC instance
fails to be created, or the resource reassignment fails, this
counter increments.
Unit Times
C900040154
Definition Number of EGPRS DL signaling TBF release due to N3105
overflow
Description During the transmission of EGPRS signaling DL TBF, the DL block
RRBP bit is set to ask the MS to respond with a Packet
Downlink Ack/Nack message.
If the specified block of BSC does not receive the MS response,
then the N3105 counter increments; if it does, then it has a
clear; if no response comes from the MS, then the RRBP bit is
set again to ask the MS to respond with a Packet Downlink
Ack/Nack message; if the N3105 counter reaches its maximum
Unit Times
C900040155
Definition Number of EGPRS DL signaling TBF release due to other reasons
Description When BSC is transmitting the last RLC block of EGPRS signaling
DL TBF, set FBI to 1, set RRBP to ask the MS to respond with a
Packet Downlink Ack/Nack message, and at the same time,
activate T3191.
If the specified block receives the MS response, then T3191 will
stop and the DL transmission ends normally. If T3191 overflows,
then it is considered that the radio transmission fails and the
EGPRS signaling DL TBF is released abnormally.
Measurement The measurement point is A1, as shown in Figure 86.
Point
Unit Times
C900040156
Definition Number of EGPRS DL signaling TBF forcing release by control
plane
Description When the user plane is transmitting the EGPRS signaling DL TBF,
if a release request comes from the control plane, then the
EGPRS signaling DL TBF will stop and be released abnormally.
Measurement When the user plane receives the release request from the
Point control plane, this counter increments. The measurement point
is A, as shown in Figure 87.
Unit Times
C900040157
Definition Number of EGPRS DL signaling TBF release due to instance
suspension
Description When the user plane is transmitting the EGPRS signaling DL TBF,
at least one block must be transmitted in every 5 seconds. After
a DL TBF block is transmitted, BSC will start or restart a 5-
second DL block assigning timer. If the timer expires, it is
considered that the user plane has an instance suspension and
the EGPRS signaling DL TBF is released abnormally.
Measurement When the DL block assigning timer expires, this counter
Point increments. The measurement point is A1, as shown in Figure 88.
Unit Times
C900040158
Definition Number of EGPRS DL signaling TBF release due to inner
abnormal
Description When the user plane is transmitting the EGPRS signaling DL TBF,
if the message fails to be sent at the radio interface, the RLC
instance fails to be created, or the resource reassignment fails,
the EGPRS signaling DL TBF will be released abnormally.
Measurement During the transmission of EGPRS signaling DL TBF, if the
Point message fails to be sent at the radio interface, the RLC instance
fails to be created, or the resource reassignment fails, this
counter increments.
Unit Times
C900040159
Definition Number of GPRS UL TBF establishments in release state
Unit Times
C900040160
Definition Number of GPRS UL TBF establishment with existing UL resource
Description To accelerate TBF establishment, UPPB caches MS’s UL/DL
resource within a period of time. When MS attempts to establish
new UL TBF on PACCH, relevant resource is directly assigned to
MS if there is resource as indicated by UPPB; otherwise, MS
sends request for resource to CMP.
Usage This counter records the number of reestablishing UL GPRS TBF
in released state without having to request for resource.
Measurement The measurement is A, as shown in Figure 91.
Point
FIGURE 91 - MEASUREMENT POINT OF GPRS UL TBF ESTABLISHMENTS WITH
EXISTING UL RESOURCE
Unit Times
C900040161
Definition Number of GPRS UL TBF establishment requests on PACCH
Description When MS has DL TBF and the TBF is in transmission status, if
MS has UL data to send but no UL TBF is available, MS sends
Packet DL Ack message together with UL TBF establishment
request. This counter counts the number of resource re-
applications after receiving this request.
Usage This counter records the number of requests for establishing UL
GPRS TBF on PACCH.
Measurement The measurement is A, as shown in Figure 92.
Point
Unit Times
C900040162
Definition Number of EGPRS UL data TBF establishments on PACCH
Description When there is available DL TBF, MS sends Packet DL Ack
message with UL TBF establishment request. When there is a
request to establish UL TBF on PACCH and the TBF type is
EGPRS, the counter increments.
Usage This counter records the number of times of establishing EGPRS
UL TBF on PACCH.
Measurement When Packet DL Ack message with UL TBF establishment
Point request is received, and the TBF type is EGPRS, the counter
increments.
Unit Times
C900040163
Definition Number of EGPRS UL TBF establishments in release state
Description If both MS and BSS support reestablishment in released state,
BSS sets RRBP and sends Packet UL Ack message (FAI =1 and
TBF Est = 1) to MS after receiving all RLC blocks from MS.
If MS has no new data to send, MS returns Packet Ctrl Ack
message to BSS.
If MS has new data to send but no DL TBF is available, then TBF
should be reestablished, with the following two cases to be
considered:
If system message indicates that Packet Control Ack is of
AB mode, then MS sends Packet Control Ack message
(Ctrl Ack bit is ‘00’) to BSS, and BSS specifies single block
resource for MS by Packet UL Assign message. Subsequent
flow is same as that of TWO STEP access.
Unit Times
C900040164
Definition Number of EGPRS UL TBF establishment with existing UL
resource
Description To accelerate TBF establishment, UPPB caches MS’s UL/DL
resource within a period of time. When MS attempts to establish
new UL TBF on PACCH, relevant resource is directly assigned to
MS if there is resource as indicated by UPPB; otherwise, MS
sends request for resource to CMP.
Usage This counter records the number of reestablishing UL EGPRS TBF
in released state without having to request for resource.
Measurement The measurement is A, as shown in Figure 95.
Point
Unit Times
C900040165
Definition Number of EGPRS UL TBF establishment requests on PACCH
Description When MS has DL TBF and the TBF is in transmission status, if
MS has UL data to send but no UL TBF is available, MS sends
Packet DL Ack message together with UL TBF establishment
request. This counter counts the number of resource re-
applications after receiving this request.
Usage This counter records the number of requests for establishing UL
EGPRS TBF on PACCH.
Measurement The measurement is A, as shown in Figure 96.
Point
FIGURE 96 – MEASUREMENT POINT OF NUMBER OF REQUESTS FOR
ESTABLISHING UL EGPRS TBF ON P ACCH
Unit Times
C900040166
Definition Number of EGPRS UL TBF establishment requests on
CCCH/PCCCH
Description When MS has new data to transmit but no corresponding UL/DL
TBF is available, MS initiates UL TBF establishment flow,
Unit Times
C900040167
Definition Number of dynamic PDCH preemption for CS service
Description This counter counts the number of times of PDCH being
preempted when the service instance is performing CS service
but fails to request for the radio channel.
Usage This counter is used to find out the busy extent of PS service
and CS service in the current cell. It can be used as reference
for expanding radio channel configuration, so as to meet
requirements of both CS and PS services.
Measurement The counter increments when the following conditions are
Point satisfied:
When the service instance is performing CS service but fails
to request for the radio channel
The database initiates the dynamic PDCH collection
Unit Times
C900040168
Definition Number of GPRS UL TBF establishment requests on
CCCH/PCCCH
Description When MS has new data to transmit but no corresponding UL/DL
TBF is available, MS initiates UL TBF establishment flow,
depending on whether the cell configures PBCCH on
CCCH/PCCCH.
Usage This counter records the number of requests for establishing
GPRS UL TBF on CCCH/PCCCH.
Unit Times
C900040169
Definition Number of GPRS DL TBF establishment requests on PACCH
Description When UL TBF exists, and there is DL data to be sent through
SGSN, a request will be sent to establish DL TBF on PACCH. This
counter increments upon the request and the TBF type is GPRS.
Usage This counter counts the number of requests to establish GPRS
DL TBF on PACCH.
Measurement When a request is sent to establish DL TBF on PACCH and the
Point TBF type is GPRS, this counter increments.
Unit Times
C900040170
Definition Number of EGPRS DL TBF establishment requests on PACCH
Description When UL TBF exists, and there is DL data to be sent through
SGSN, a request will be sent to establish DL TBF on PACCH. This
counter increments upon the request and the TBF type is EGPRS.
Usage This counter counts the number of requests to establish EGPRS
DL TBF on PACCH.
Measurement When a request is sent to establish DL TBF on PACCH and the
Point TBF type is EGPRS, this counter increments.
Unit Times
C900040171
Definition Number of GPRS UL TBF establishment requests on PACCH
Description When there is available DL TBF, MS sends Packet DL Ack
message with UL TBF establishment request. When there is a
C900040172
Definition Number of DL RLC pending blocks in MCS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS1.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS1.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS1 to MS, the counter increments. The measurement point is
A, as shown in Figure 53.
Unit Times
C900040173
Definition Number of DL RLC pending blocks in MCS2 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS2.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS2.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS2 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040174
Definition Number of DL RLC pending blocks in MCS3 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS3 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040175
Definition Number of DL RLC pending blocks in MCS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS4.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS4.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS4 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040176
Definition Number of DL RLC pending blocks in MCS5 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS5.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS5.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS5 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040177
Definition Number of DL RLC pending blocks in MCS6 on PDTCH
C900040178
Definition Number of DL RLC pending blocks in MCS7 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS7.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS7.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS7 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040179
Definition Number of DL RLC pending blocks in MCS8 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL pending RLC
blocks from BSC to MS, with coding method of MCS8.
Usage This counter counts the number of DL pending RLC blocks sent
on PDTCH, with coding method of MCS8.
Measurement When BSC sends a pending RLC block whose coding method is
Point MCS8 to MS via BTS, the counter increments. The measurement
point is A, as shown in Figure 53.
Unit Times
C900040180
Definition Number of DL RLC pending blocks in MCS9 on PDTCH
C900040181
Definition Number of DL RLC NACK blocks in MCS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS1.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS1.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS1 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040182
Definition Number of DL RLC NACK blocks in MCS2 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS2.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS2.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS2 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040183
Definition Number of DL RLC NACK blocks in MCS3 on PDTCH
C900040184
Definition Number of DL RLC NACK blocks in MCS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS4.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS4.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS4 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040185
Definition Number of DL RLC NACK blocks in MCS5 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS5.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS5.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS5 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040186
Definition Number of DL RLC NACK blocks in MCS6 on PDTCH
C900040187
Definition Number of DL RLC NACK blocks in MCS7 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS7.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS7.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS7 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040188
Definition Number of DL RLC NACK blocks in MCS8 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL retransmitted
RLC blocks from BSC to MS, with coding method of MCS8.
Usage This counter counts the number of DL retransmitted RLC blocks
sent on PDTCH, with coding method of MCS8.
Measurement When BSC sends retransmitted RLC block whose coding method
Point is MCS8 to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 54.
Unit Times
C900040189
Definition Number of DL RLC NACK blocks in MCS9 on PDTCH
C900040190
Definition Number of DL RLC new blocks in MCS1 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS1.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS1
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS1) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040191
Definition Number of DL RLC new blocks in MCS2 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS2.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS2.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS2) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040192
Definition Number of DL RLC new blocks in MCS3 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS3.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS3.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS3) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040193
Definition Number of DL RLC new blocks in MCS4 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS4.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS4.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS4) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040194
Definition Number of DL RLC new blocks in MCS5 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS5.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS5.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS5) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040195
Definition Number of DL RLC new blocks in MCS6 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS6.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS6.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS6) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040196
Definition Number of DL RLC new blocks in MCS7 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS7.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS7.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS7) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040197
Definition Number of DL RLC new blocks in MCS8 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS8.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS8.
C900040198
Definition Number of DL RLC new blocks in MCS9 on PDTCH
Description After BSC receives DownLink Ack message, it decides whether
to send pending RLC block, to resend RLC block or to send new
data blocks. This counter counts the number of DL first-
transmitted RLC blocks from BSC to MS, with coding method of
MCS9.
Usage The counter is used to review the status of DL first-transmitted
RLC blocks sent by BSC on PDTCH, with coding method of MCS9.
Measurement When BSC sends first-transmitted RLC block (with coding
Point method of MCS9) to MS via BTS, the counter increments. The
measurement point is A, as shown in Figure 55.
Unit Times
C900040199
Definition Number of UL RLC pending blocks in MCS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS1-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS1-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS1-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040200
Definition Number of UL RLC pending blocks in MCS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS2-
coded pending RLC blocks received on PDTCH.
Usage
C900040201
Definition Number of UL RLC pending blocks in MCS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS3-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS3-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS3-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040202
Definition Number of UL RLC pending blocks in MCS4 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS4-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS4-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS4-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040203
Definition Number of UL RLC pending blocks in MCS5 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS5-
coded pending RLC blocks received on PDTCH.
C900040204
Definition Number of UL RLC pending blocks in MCS6 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS6-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS6-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS6-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040205
Definition Number of UL RLC pending blocks in MCS7 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS7-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS7-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS7-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040206
Definition Number of UL RLC pending blocks in MCS8 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS8-
coded pending RLC blocks received on PDTCH.
C900040207
Definition Number of UL RLC pending blocks in MCS9 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS9-
coded pending RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS9-coded
pending RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS9-coded UL pending RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 57.
Unit Times
C900040208
Definition Number of UL RLC NACK blocks in MCS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS1-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS1-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS1-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040209
Definition Number of UL RLC NACK blocks in MCS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS2-
coded retransmitted RLC blocks received on PDTCH.
C900040210
Definition Number of UL RLC NACK blocks in MCS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS3-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS3-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS3-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040211
Definition Number of UL RLC NACK blocks in MCS4 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS4-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS4-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS4-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040212
Definition Number of UL RLC NACK blocks in MCS5 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040213
Definition Number of UL RLC NACK blocks in MCS6 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS6-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS6-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS6-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040214
Definition Number of UL RLC NACK blocks in MCS7 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS7-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS7-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS7-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040215
Definition Number of UL RLC NACK blocks in MCS8 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040216
Definition Number of UL RLC NACK blocks in MCS9 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS9-
coded retransmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS9-coded
retransmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS9-coded UL retransmitted RLC block, the
Point counter increments. The measurement point is A, as shown in
Figure 58.
Unit Times
C900040217
Definition Number of UL RLC new blocks in MCS1 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS1-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS1-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS1-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040218
Definition Number of UL RLC new blocks in MCS2 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040219
Definition Number of UL RLC new blocks in MCS3 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS3-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS3-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS3-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040220
Definition Number of UL RLC new blocks in MCS4 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS4-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS4-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS4-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040221
Definition Number of UL RLC new blocks in MCS5 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040222
Definition Number of UL RLC new blocks in MCS6 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS6-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS6-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS6-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040223
Definition Number of UL RLC new blocks in MCS7 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS7-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS7-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS7-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
C900040224
Definition Number of UL RLC new blocks in MCS8 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
C900040225
Definition Number of UL RLC new blocks in MCS9 on PDTCH
Description After receiving UL data block, BSC decides whether it is
retransmitted RLC block, first-transmitted RLC block or pending
RLC block. This counter counts the number of useful UL MCS9-
coded first-transmitted RLC blocks received on PDTCH.
Usage This counter counts the number of useful UL MCS9-coded first-
transmitted RLC blocks received by BSC on PDTCH.
Measurement When BSC receives MCS9-coded UL first-transmitted RLC block,
Point the counter increments. The measurement point is A, as shown
in Figure 59.
Unit Times
Overview
CPU load measurement consists of statistic of the average value
and peak value of CPU load.
The measurement takes BSC as the statistics unit.
C900050001
Definition Average load of the processor
Description This counter counts the average load of the main processor
during measurement period.
C900050002
Definition Peak value of the processor load
Description This counter counts the peak value of the main processor load
during measurement period.
Measurement The measurement point is the peak value of the sampling main
Point processor load during collection period.
Unit Percent
CS Basic Measurement
Overview
CS basic measurement involves counters that are used to
evaluate the circuit switching service performance and status.
These counters are often used in measurement related to radio
access, SDCCH, TCH, SAPI3, call drop, handover, Abis interface
message statistics, and radio resource availability.
The measurement takes cell as the statistics unit.
C900060001
Definition Number of MTC access attempts
Description This counter counts the number of channel requests due to MTC
random access. When MS sends the CHL_REQ message to BSC
through BTS to request for radio channel, if TA does not exceed
the cell range and the access reason is “MTC”, the counter
increments.
Usage This counter is used to find out the frequency of channel request
due to MTC.
Measurement The counter counts when MS requests for channel from BSC and
Point TA does not exceed the cell range. The measurement point is A1,
as shown in Figure 99.
MS BTS BSC
CHL_REQ
CHL_RQD
A1
A2
CHL_ACT
CHL_ACT_ACK
A3
IMM_ASS_ CMD
IMM_ASS
SABM
EST_IND
A4
Unit Times
C900060002
Definition Number of MTC access success
Description This counter counts the number of MS successfully accessing the
channel assigned in the immediate assignment message (the
C900060003
Definition Number of SDCCH seizure attempts for assignment
Description SDCCH channel allocation attempt is activated by the MS
channel request message CHL_REQ. After BSC receives this
message, it attempts to allocate channel for the request.
If allocation and occupation succeed, C900060003 and
C900060004 accumulate simultaneously.
If occupation fails and the failure is due to transceiver fault,
C900060003, C900060004, and C900060005 do not change.
For failures in other cases, C900060003 and C900060005
accumulate simultaneously.
Usage This counter counts the number of SDCCH channel occupation
attempts during assignment, including the number of occupation
success (C900060004) and the number of occupation failure
(C900060005).
Measurement This counter counts when BSC completes requesting for channel
Point (due to assignment) (C900060004 + C900060005). The
measurement point is A1, as shown in Figure 100.
MS BTS BSC
CHL_REQ
CHL_RQD
A1
CHL_ACT
CHL_ACT_ACK
A2
IMM_ASS
SABM
EST_IND
A3
Unit Times
C900060004
Definition Number of SDCCH seizure success for assignment
Description SDCCH channel allocation attempt is activated by the MS
channel request message CHL_REQ. After BSC receives this
message, it attempts to allocate channel for the request. This
counter accumulates when allocation and occupation succeed.
Usage This counter counts the number of successful SDCCH channel
occupations during assignment.
Measurement This counter counts when BSC requests for channel (due to
Point assignment) and occupies the channel successfully. The
measurement point is A1, as shown in Figure 100.
Unit Times
C900060005
Definition Number of SDCCH seizure failure for assignment
Description SDCCH channel allocation attempt is activated by the MS
channel request message CHL_REQ. After BSC receives this
message, it attempts to allocate channel for the request.
If allocation succeeds but occupation fails, this counter
accumulates.
C900060006
Definition Number of SDCCH seizure attempts for handover
Description SDCCH channel allocation attempt is activated by the channel
request message RADIO_APPLY from other channel instances.
After BSC receives this message, it attempts to allocate channel
for the request.
If allocation and occupation succeed, C900060006 and
C901250005 accumulate simultaneously.
If occupation fails, C900060006 and C900060007
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060006 and
C901250005 accumulate simultaneously.
f If the waiting for resource fails and the failure is due to
transceiver fault, C900060006, C901250005, and
C900060007 do not change.
For failures in other cases, C900060006 and C900060007
accumulate simultaneously.
Usage This counter counts the number of SDCCH channel occupation
attempts during handover, including the number of occupation
success (C900060006) and the number of occupation failure
(C900060007).
Measurement BSC completes requesting for channel (due to handover), or BSC
Point receives the internal message of waiting for resource
successfully or waiting for resource failed (C901250005 +
C900060007). The measurement point is B1 as shown in Figure
101 and C1 as shown in Figure 102.
CHL_ACT
CHL_ACT_ACK
ASS_CMD B2
ASS_CMD
SABM
UA EST_IND
ASS_COM
ASS_COM
B3 HO_PREFORM
C1
CHL_ACT
CHL_ACT_ACK
C2 HO_REQ_ACK
HO_ACCESS
HO_DETECT
PHY_INFO
HO_DETECT
SABM
UA
HO_COM
HO_COM
C3 HO_COM
Unit Times
C900060007
Definition Number of SDCCH seizure failure for handover
Description SDCCH channel allocation attempt is activated by the channel
request message RADIO_APPLY from other channel instances.
After BSC receives this message, it attempts to allocate channel
for the request.
C900060008
Definition Number of SDCCH allocation success for assignment
Description After BSC responds the channel request message to allocate and
occupy SDCCH channel successfully, BSC sends the CHL_ACT
message to BTS to activate this SDCCH. If the SDCCH is
activated successfully (that is, when BSC receives the
CHL_ACT_ACK message from BTS), this counter accumulates.
Usage This counter counts the number of successful SDCCH channel
allocations during assignment.
Measurement This counter counts when BSC receives the CHL_ACT_ACK
Point message from BTS and the cause is assignment. The
measurement point is A2, as shown in Figure 100.
Unit Times
C900060009
Definition Number of SDCCH allocation failure for assignment
Description After BSC responds the channel request message to allocate and
occupy SDCCH channel successfully, BSC sends the CHL_ACT
message to BTS to activate this SDCCH. If channel activation
fails due to receiving channel activation failure message,
incorrect channel activation response message, T9103 being
timeout, channel instance being released or channel being
forcibly released, this counter accumulates.
Usage This counter counts the number of SDCCH channel allocation
failure during assignment.
C900060010
Definition Number of signaling TCH/F seizure attempts for assignment
Description This counter counts the number of TCH/F channel occupation
attempts during assigning signaling channels, including the
number of occupation success (C901260002) and the number of
occupation failure (C900060011).
Usage After BSC receives the channel request, it attempts to allocate
channel for the request.
If allocation and occupation succeed, C900060010 and
C901260002 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060010, C901260002, and C900060011 do not change.
For other cases, C900060010 and C900060011 accumulate
simultaneously.
Measurement This counter counts when BSC completes requesting for channel
Point (due to assignment and the channel is used as signaling channel)
(C901260002 + C900060011). The measurement point is A1, as
shown in Figure 103.
MS BTS BSC
CHL_REQ
CHL_RQD
A1
CHL_ACT
CHL_ACT_ACK
A2
IMM_ASS_CMD
IMM_ASS
SABM EST_IND
A3
Unit Times
C900060011
Definition Number of signaling TCH/F seizure failure for assignment
Description This counter counts the number of TCH/F channel occupation
failures during assigning signaling channels.
After BSC receives the channel request, it attempts to allocate
channel for the request.
If occupation fails, this counter accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to assignment and the channel is
Point used as signaling channel) but fails to occupy the channel, or
BSC fails to wait for internal resource. The measurement point is
A1, as shown in Figure 104.
Unit Times
C900060012
Definition Number of signaling TCH/F seizure attempts for handover
Description This counter counts the number of TCH/F channel occupation
attempts during signaling channel handover, including the
number of occupation success (C901260005) and the number of
occupation failure (C900060013).
After BSC receives the channel request, it attempts to allocate
channel for the request.
If allocation and occupation succeed, C900060012 and
C901260005 accumulate simultaneously.
If occupation fails, C900060012 and C900060013
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
CHL_ACT_ACK
ASS_CMD C3
ASS_CMD
SABM
UA EST_IND
ASS_COM
ASS_COM
C4 HO_PREFORM
TCRescr Ack
C1
iTC Connect Req
C2
CHL_ACT
CHL_ACT_ACK
ASS_CMD C3
ASS_CMD
SABM
UA EST_IND
ASS_COM
ASS_COM
C4
HO_PREFORM
Unit Times
C900060013
Definition Number of signaling TCH/F seizure failure for handover
Description This counter counts the number of TCH/F channel occupation
failures during signaling channel handover.
After BSC receives the channel request, it attempts to allocate
channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as signaling channel) but fails to occupy the channel, or
BSC fails to wait for internal resource. The measurement point is
C1 as shown in Figure 109 and D1 as shown in Figure 110.
BSC MSC
HO_REQ
D
1 (TCH seizure fails, external
handover is not
implemented)
Unit Times
C900060014
Definition Number of signaling TCH/F allocation success for assignment
Description This counter counts the number TCH/F channel being allocated
successfully during signaling channel assignment.
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F channel. If the activation
succeeds (that is, when BSC receives the CHL_ACT_ACK
message from BTS), the counter accumulates.
C900060015
Definition Number of signaling TCH/F allocation failure for assignment
Description This counter counts the number of TCH/F channel allocation
failures during signaling channel assignment.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F channel.
If the channel activation fails due to receiving channel activation
failure message, incorrect channel activation response message,
T9103 timeout, channel instance being released or channel
being released forcibly, this counter accumulates.
Measurement BSC activates TCH/F channel due to assignment and uses it as
Point signaling channel, but receives channel activation failure
message, incorrect channel activation response message, T9103
being timeout, channel instance being released, or channel being
MS BTS BSC
CHL_REQ
CHL_RQD
A1
CHL_ACT
CHL_ACT_NACK
…
A2
Unit Times
C900060016
Definition Number of signaling TCH/F allocation failure for handover
Description This counter counts the number of TCH/F channel allocation
failures during signaling channel handover.
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F channel.
If the channel activation fails due to receiving channel activation
failure message, incorrect channel activation response message,
T9103 timeout, channel instance being released or channel
being released forcibly, this counter will accumulate.
Measurement BSC activates TCH/F channel due to handover and uses it as
Point signaling channel, but receives channel activation failure
message, incorrect channel activation response message, T9103
being timeout, channel instance being released, or channel being
forcibly released.
The measurement point is C3 as shown in Figure 112 and D3 as
shown in Figure 113.
CHL_ACT_NACK
... D3
Unit Times
C900060017
Definition Number of signaling TCH/F assignment success for assignment
Description This counter counts the number of successful assignments of
TCH/F as signaling channel.
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. For immediate
assignment, after the TCH/F activation succeeds, BTS finds the
MS accessed and sends the EST_IND message to BSC, this
counter accumulates when BSC receives the message correctly.
Measurement For immediate assignment, this counter counts when BSC
Point receives the EST_IND message correctly. The measurement
point is A3, as shown in Figure 103.
Unit Times
C900060018
Definition Number of signaling TCH/F assignment failure for assignment
Description This counter counts the number of failing to assign TCH/F
channel as signaling channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If BSC does not receive
the MS access notification within a certain time, this assignment
fails.
Measurement For immediate assignment, this counter counts when BSC
Point receives incorrect EST_IND message or T3101 is timeout. The
measurement point is A3, as shown in Figure 114
MS BTS BSC
CHL_REQ
CHL_RQD
A1
CHL_ACT
CHL_ACT_ACK
IMM_ASS_CM A2
IMM_ASS D
Unit Times
C900060019
Definition Number of voice TCH/F seizure attempts
Description This counter counts the number of TCH/F channel being
attempted to be occupied during voice channel assignment,
including the number of occupation success (C901260021) and
the number of occupation failure (C900060020).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060019 and
C901260021 accumulate simultaneously.
If occupation fails, C900060019 and C900060020
accumulate simultaneously.
B1
Abis,TCU connect
CHL_ACT B2
CHL_ACT_ACK
ASS_CMD B3
ASS_CMD
SABM
UA EST_IND
ASS_COM B4
ASS_COM
B5 ASS_COM
Unit Times
C900060020
Definition Number of voice TCH/F seizure failure
Description This counter counts the number of TCH/F channel occupation
failure during voice channel assignment.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to assignment and the channel is
Point used as voice channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is B1,
as shown in Figure 117.
BSC MSC
ASS_REQ
Channel
seizure B1
ASS_FAIL
fails
Unit Times
C900060021
Definition Number of voice TCH/F seizure attempts for handover
Description This counter counts the number of TCH/F channel being
attempted to be occupied during voice channel handover,
including the number of occupation success (C901260024) and
the number of occupation failure (C900060022).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060021 and
C901260024 accumulate simultaneously.
If occupation fails, C900060021 and C900060022
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060021 and
C901260024 accumulate simultaneously.
f If the waiting for resource fails, C900060021 and
C900060022 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060021, C901260024, and C900060022 do not change.
For failures in other cases, C900060021 and C900060022
accumulate simultaneously.
Measurement BSC completes requesting for channel (due to handover and the
Point channel is used as voice channel), or BSC receives the internal
message of waiting for resource successfully or waiting for
resource failed (C901260024 + C900060022). The measurement
point is C1 as shown in Figure 105 and Figure 106 and D1 as
shown in Figure 107 and Figure 108.
Unit Times
C900060022
Definition Number of voice TCH/F seizure failure for handover
Description This counter counts the number of TCH/F channel occupation
failure during voice channel handover.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If allocation or occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as voice channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is C1
as shown in Figure 109 and D1 as shown in Figure 110.
Unit Times
C900060023
Definition Number of TCH/F allocation success for assignment (speech
version1)
Description This counter counts the number of TCH/F channel being
allocated successfully during voice channel assignment (speech
version 1).
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If the TCH/F is activated
successfully (that is, when BSC receives the CHL_ACT_ACK
message from BTS), this counter accumulates.
Measurement This counter counts when BSC receives the CHL_ACT_ACK
Point message from BTS, the cause is assignment and the channel is
used as voice channel (speech version 1). The measurement
point is B3, as shown in Figure 115 and Figure 116.
Unit Times
C900060024
Definition
Unit Times
C900060025
Definition Number of TCH/F allocation success for assignment (speech
version2)
Description This counter counts the number of TCH/F channel being
allocated successfully during voice channel assignment (speech
version 2).
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If the TCH/F is activated
successfully (that is, when BSC receives the CHL_ACT_ACK
message from BTS), this counter accumulates.
Measurement This counter counts when BSC receives the CHL_ACT_ACK
Point message from BTS, the cause is assignment and the channel is
C900060026
Definition Number of TCH/F allocation success for assignment (speech
version3)
Description This counter counts the number of TCH/F channel being
allocated successfully during voice channel assignment (speech
version 3).
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If the TCH/F is activated
successfully (that is, when BSC receives the CHL_ACT_ACK
message from BTS), this counter accumulates.
Measurement This counter counts when BSC receives the CHL_ACT_ACK
Point message from BTS, the cause is assignment and the channel is
used as voice channel (speech version 3). The measurement
point is B3, as shown in Figure 115 and Figure 116.
Unit Times
C900060027
Definition Number of TCH/F allocation failure for assignment (speech
version3)
Description This counter counts the number of TCH/F channel allocation
failure due to channel activation failure during voice channel
assignment (speech version 3).
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If channel activation fails
due to receiving channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released or channel being forcibly
released, this counter accumulates.
Measurement BSC activates TCH/F channel due to assignment and uses the
Point channel as voice channel (speech version 3), but receives
channel activation failure message, incorrect channel activation
response message, T9103 being timeout, channel instance being
released, or channel being forcibly released. The measurement
point is B3, as shown in Figure 118.
Unit Times
C900060028
Definition Number of voice TCH/F assignment success
Description This counter counts the number of successful assignments of
TCH/F as voice channel.
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. For assignment from A-
interface, after BSC receives the assignment success message,
the counter accumulates.
Measurement For assignment from A-interface, the counter accumulates when
Point BSC receives the assignment success message. The
measurement point is B5, as shown in Figure 115 and Figure
116.
Unit Times
C900060029
Definition Number of voice TCH/F assignment failure for assignment
Description This counter counts the number of failing to assign TCH/F
channel as voice channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If BSC does not receive
the MS access notification within a certain time, this assignment
fails.
Measurement This counter counts when BSC receives assignment failure
Point message, abnormal message, channel instance being released,
channel instance being released forcibly, or timer timeout
message. The measurement point is B5, as shown in Figure 119.
B1
Abis,TCU connect
CHL_ACT B2
CHL_ACT_ACK
ASS_CMD B3
ASS_CMD
SABM
UA EST_IND
ASS_FAIL B4
ASS_FAIL
B5 ASS_FAIL
Unit Times
C900060030
Definition Number of data TCH/F seizure attempts for assignment
Description This counter counts the number of TCH/F channel being
attempted to be occupied during data channel assignment,
including the number of occupation success (C901260070) and
the number of occupation failure (C900060031).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060030 and
C901260070 accumulate simultaneously.
If occupation fails, C900060030 and C900060031
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060030 and
C901260070 accumulate simultaneously.
f If the waiting for resource fails, C900060030 and
C900060031 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060030, C901260070, and C900060031 do not change.
For failures in other cases, C900060030 and C900060031
accumulate simultaneously.
Measurement BSC completes requesting for channel (due to assignment and
Point the channel is used as data channel), or BSC receives the
C900060031
Definition Number of data TCH/F seizure failure for assignment
Description This counter counts the number of TCH/F channel occupation
failure during data channel assignment.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to assignment and the channel is
Point used as data channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is B1,
as shown in Figure 117.
Unit Times
C900060032
Definition Number of data TCH/F seizure attempts for handover
Description This counter counts the number of TCH/F channel being
attempted to be occupied during data channel handover,
including the number of occupation success (C901260073) and
the number of occupation failure (C900060033).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060032 and
C901260073 accumulate simultaneously.
If occupation fails, C900060032 and C900060033
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
C900060033
Definition Number of data TCH/F seizure failure for handover
Description This counter counts the number of TCH/F channel occupation
failure during data channel handover.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as data channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is C1
as shown in Figure 109 and D1 as shown in Figure 110.
Unit Times
C900060034
Definition Number of data TCH/F allocation success for assignment
Description This counter counts the number of TCH/F channel being
allocated successfully during data channel assignment.
C900060035
Definition Number of data TCH/F allocation failure for assignment
Description This counter counts the number of TCH/F channel allocation
failure due to channel activation failure during data channel
assignment.
After BSC responds the channel request message to allocate and
occupy TCH/F channel successfully, if connection succeeds, BSC
sends the CHL_ACT message to BTS to activate this TCH/F. If
channel activation fails due to receiving channel activation
failure message, incorrect channel activation response message,
T9103 being timeout, channel instance being released or
channel being forcibly released, this counter accumulates.
Measurement BSC activates TCH/F channel due to assignment and uses the
Point channel as data channel, but receives channel activation failure
message, incorrect channel activation response message, T9103
being timeout, channel instance being released, or channel being
forcibly released. The measurement point is B3, as shown in
Figure 118.
Unit Times
C900060036
Definition Number of data TCH/F assignment success
Description This counter counts the number of successful assignments of
TCH/F as data channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. For assignment from A-
interface, after BSC receives the assignment success message,
the counter accumulates.
Measurement For assignment from A-interface, the counter accumulates when
Point BSC receives the assignment success message. The
C900060037
Definition Number of data TCH/F assignment failure
Description This counter counts the number of failing to assign TCH/F
channel as data channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If BSC does not receive
the MS access notification within a certain time, this assignment
fails.
Measurement This counter counts when BSC receives assignment failure
Point message, abnormal message, channel instance being released,
channel instance being released forcibly, or timer timeout
message. The measurement point is B5, as shown in Figure 119.
Unit Times
C900060038
Definition Number of signaling TCH/H seizure attempts for assignment
Description This counter counts the number of TCH/H channel being
attempted to be occupied during signaling channel assignment,
including the number of occupation success (C901270002) and
the number of occupation failure (C900060039).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060038 and
C901270002 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060038, C901270002, and C900060039 do not change.
For other cases, C900060038 and C900060039 accumulate
simultaneously.
Measurement This counter counts when BSC completes requesting for channel
Point (due to assignment and the channel is used as signaling channel)
(C901270002 + C900060039). The measurement point is A1, as
shown in Figure 103.
Unit Times
C900060039
Definition Number of signaling TCH/H seizure failure for assignment
Description This counter counts the number of TCH/H channel occupation
failure during signaling channel assignment.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to assignment and the channel is
Point used as signaling channel) but fails to occupy the channel, or
BSC fails to wait for internal resource. The measurement point is
A1, as shown in Figure 104.
Unit Times
C900060040
Definition Number of signaling TCH/H seizure attempts for handover
Description This counter counts the number of TCH/H channel being
attempted to be occupied during signaling channel handover,
including the number of occupation success (C901270005) and
the number of occupation failure (C900060041).
After BSC receives the channel request, it attempts to allocate
channel for the request.
If allocation and occupation succeed, C900060040 and
C901270005 accumulate simultaneously.
If occupation fails, C900060040 and C900060041
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060040 and
C901270005 accumulate simultaneously.
f If the waiting for resource fails, C900060040 and
C900060041 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060040, C901270005, and C900060041 do not change.
For failures in other cases, C900060040 and C900060041
accumulate simultaneously.
Measurement BSC completes requesting for channel (due to handover and the
Point channel is used as signaling channel), or BSC receives the
internal message of waiting for resource successfully or waiting
for resource failed (C901270005 + C900060041). The
measurement point is C1 as shown in Figure 105 and Figure 106
and D1 as shown in Figure 107 and Figure 108.
Unit Times
C900060041
Definition Number of signaling TCH/H seizure failure for handover
Description This counter counts the number of TCH/H channel occupation
failures during signaling channel handover.
After BSC receives the channel request, it attempts to allocate
channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as signaling channel) but fails to occupy the channel, or
BSC fails to wait for internal resource. The measurement point is
C1 as shown in Figure 109 and D1 as shown in Figure 110.
Unit Times
C900060042
Definition Number of voice TCH/H seizure attempts for assignment
Description This counter counts the number of TCH/H channel being
attempted to be occupied during voice channel assignment,
including the number of occupation success (C901270021) and
the number of occupation failure (C900060043).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060042 and
C901270021 accumulate simultaneously.
If occupation fails, C900060042 and C900060043
accumulate simultaneously.
C900060043
Definition Number of voice TCH/H seizure failure for assignment
Description This counter counts the number of TCH/H channel occupation
failure during voice channel assignment.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to assignment and the channel is
Point used as voice channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is B1,
as shown in Figure 117.
Unit Times
C900060044
Definition Number of voice TCH/H seizure attempts for handover
C900060045
Definition Number of voice TCH/H seizure failure for handover
Description This counter counts the number of TCH/H channel occupation
failure during voice channel handover.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If allocation or occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as voice channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is C1
as shown in Figure 109 and D1 as shown in Figure 110.
Unit Times
C900060046
Definition Number of data TCH/H seizure attempts for assignment
Description This counter counts the number of TCH/H channel being
attempted to be occupied during data channel assignment,
including the number of occupation success (C901270070) and
the number of occupation failure (C900060047).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060046 and
C901270070 accumulate simultaneously.
If occupation fails, C900060046 and C900060047
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060046 and
C901270070 accumulate simultaneously.
f If the waiting for resource fails, C900060046 and
C900060047 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060046, C901270070, and C900060047 do not change.
For failures in other cases, C900060046 and C900060047
accumulate simultaneously.
Measurement BSC completes requesting for channel (due to assignment and
Point the channel is used as data channel), or BSC receives the
internal message of waiting for resource successfully or waiting
for resource failed (C901270070 + C900060047). The
measurement point is B1, as shown in Figure 115 and Figure
116.
Unit Times
C900060047
Definition Number of data TCH/H seizure failure for assignment
Description This counter counts the number of TCH/H channel occupation
failure during data channel assignment.
C900060048
Definition Number of data TCH/H seizure attempts for handover
Description This counter counts the number of TCH/H channel being
attempted to be occupied during data channel handover,
including the number of occupation success (C901270073) and
the number of occupation failure (C900060049).
After BSC receives the channel request massage, it attempts to
allocate channel for the request.
If allocation and occupation succeed, C900060048 and
C901270073 accumulate simultaneously.
If occupation fails, C900060048 and C900060049
accumulate simultaneously.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource.
f If the waiting for resource succeeds, C900060048 and
C901270073 accumulate simultaneously.
f If the waiting for resource fails, C900060048 and
C900060049 accumulate simultaneously.
If the request returns that the transceiver is faulty,
C900060048, C901270073, and C900060049 do not change.
For failures in other cases, C900060048 and C900060049
accumulate simultaneously.
Measurement BSC completes requesting for channel (due to handover and the
Point channel is used as data channel), or BSC receives the internal
message of waiting for resource successfully or waiting for
resource failed (C901270073 + C900060049). The measurement
C900060049
Definition Number of data TCH/H seizure failure for handover
Description This counter counts the number of TCH/H channel occupation
failure during data channel handover.
After BSC receives the channel request message, it attempts to
allocate channel for the request.
If occupation fails, this counter accumulates.
If the request returns no channel available but queuing or
forced release is possible, enter the state of waiting for
resource. If the waiting for resource fails, this counter
accumulates.
If the request returns that the transceiver is faulty, this
counter does not change.
For failures in other cases, this counter accumulates.
Measurement BSC requests for channel (due to handover and the channel is
Point used as data channel) but fails to occupy the channel, or BSC
fails to wait for internal resource. The measurement point is C1
as shown in Figure 109 and D1 as shown in Figure 110.
Unit Times
C900060050
Definition Number of SAPI3 link establishment requests on SDCCH (MO-SM)
Description This counter counts the number of short message link
establishments of mobile originating call on SDCCH. On SDCCH,
BSC receives the EST_IND message sent by BTS. If the layer-3
information in this message is SAPI = 3, this counter increments.
Usage This counter is used to find out the frequency of SAPI 3 link
establishment on SDCCH.
Measurement This counter counts when BSC receives the EST_IND message
Point (SAPI = 3) from BTS. The measurement point is B1, as shown in
Figure 120.
Unit Times
C900060051
Definition Number of SAPI3 link establishment requests on SDCCH (MT-SM)
Description This counter counts the number of short message link
establishments of mobile terminating call on SDCCH. On SDCCH,
if BSC receives the DTAP_IND message (SAPI = 3) sent by MSC
and the short message link between BSC and MS is not
established, BSC initiates the link establishment flow, this
counter increments.
Usage This counter is used to find out the frequency of SAPI 3 link
establishment request on SDCCH.
Measurement This counter counts when BSC sends the EST_REQ message
Point (SAPI = 3) to BTS and the short message link is not established
between BSC and MS. The measurement point is D1, as shown
in Figure 121.
Paging
Paging Cmd
Paging Request
Chan Request
Chan Required
Chan Activation
Chan Act ACK
Imm Ass Cmd(Imm Ass)
Imm Ass
SABM(Paging Resp)
Est Ind ( Paging Resp)
CR (Paging Resp )
UA
CC (Authentication Req)
From SC
CP_ DATA(RP_ DATA)
Est Req (SAPI=3)
SABM(SAPI=3)
UA D1
Est Conf ( SAPI=3)
D2
CP_DATA(RP_ DATA)
D3
CP_ ACK
D4
CP_ DATA(RP_ ACK) To SC
D5
CP_ ACK
D6
Clear Cmd
Data Req (Chan Release)
Chan Release Clear Cmp
Deact SACCH
DISC
Release Ind
RF Chan Release
RF Chan Release ACK
Unit Times
C900060052
Definition Number of SDCCH drops due to handover failure
Description This counter counts the number of call drops due to handover
failure on SDCCH. Call drop occurs after MS requests for SDCCH
successfully. If the problem is due to handover failure, this
counter increments.
Presently, reasons for handover failure include T3107 timeout,
T3103 timeout and external handover timer timeout under the
status of ASSIGNING.
T3107 indicates the duration from sending the intra-cell
handover command ASSIGN_CMD to receiving the assignment
completion message ASSIGN_COM. T3103 indicates the duration
from sending the inter-cell handover command HOINTER_CMD
C900060053
Definition Number of SDCCH drops
Description This counter counts the number of call drops on SDCCH channel
due to radio link failure, LAPD link break, or handover failure.
Call drop occurs after MS requests for TCH/H channel
successfully. The counter increments if call drop is due to the
above causes.
Usage This counter is used to find out the frequency of call drop on
SDCCH channel due to radio link failure, LAPD link break, or
handover failure.
Measurement This counter increments when call drop occurs on SDCCH
Point channel due to radio link failure, LAPD link failure, or handover
failure.
Unit Times
C900060054
Definition Number of TCH/F drops
Description This counter counts the number of call drops on TCH/F channel
due to radio link failure, LAPD link break, or handover failure.
Call drop occurs after MS requests for TCH/H channel
Usage This counter is used to find out the frequency of call drop on
TCH/F channel due to radio link failure, LAPD link break, or
handover failure.
Measurement The counter increments when call drop occurs on TCH/F channel
Point due to radio link failure, LAPD link failure, or handover failure.
Unit Times
C900060055
Definition Number of TCH/H drops
Description This counter counts the number of call drops on TCH/H channel
due to radio link failure, LAPD link break, or handover failure.
Call drop occurs after MS requests for TCH/H channel
successfully. The counter increments if call drop is due to the
above causes.
Usage This counter is used to find out the frequency of call drop on
TCH/H channel due to radio link failure, LAPD link break, or
handover failure.
Measurement The counter increments when call drop occurs on TCH/H channel
Point due to radio link failure, LAPD link failure, or handover failure.
Unit Times
C900060056
Definition Average number of idle TCH/F with interference band 1
Description This counter counts the number of idle TCH/Fs with interference
band 1 in the carrier.
Usage This counter is used to find out the number of idle TCH/Fs with
interference band 1.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060057
Definition Average number of idle TCH/F with interference band 2
Description This counter counts the number of idle TCH/Fs with interference
band 2 in the carrier.
Usage This counter is used to find out the number of idle TCH/Fs with
interference band 2.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060058
Definition Average number of idle TCH/F with interference band 3
Description This counter counts the number of idle TCH/Fs with interference
band 3 in the carrier.
Usage This counter is used to find out the number of idle TCH/Fs with
interference band 3.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060059
Definition Average number of idle TCH/F with interference band 4
Description This counter counts the number of idle TCH/Fs with interference
band 4 in the carrier.
Usage This counter is used to find out the number of idle TCH/Fs with
interference band 4.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060060
Definition Average number of idle TCH/F with interference band 5
Description This counter counts the number of idle TCH/Fs with interference
band 5 in the carrier.
Usage This counter is used to find out the number of idle TCH/Fs with
interference band 5.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060061
Definition Average number of idle TCH/H with interference band 1
Description This counter counts the number of idle TCH/Hs with interference
band 1 in the carrier.
Usage This counter is used to find out the number of idle TCH/Hs with
interference band 1.
Unit Times
C900060062
Definition Average number of idle TCH/H with interference band 2
Description This counter counts the number of idle TCH/Hs with interference
band 2 in the carrier.
Usage This counter is used to find out the number of idle TCH/Hs with
interference band 2.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060063
Definition Average number of idle TCH/H with interference band 3
Description This counter counts the number of idle TCH/Hs with interference
band 3 in the carrier.
Usage This counter is used to find out the number of idle TCH/Hs with
interference band 3.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060064
Definition Average number of idle TCH/H with interference band 4
Description
Unit Times
C900060065
Definition Average number of idle TCH/H with interference band 5
Description This counter counts the number of idle TCH/Hs with interference
band 5 in the carrier.
Usage This counter is used to find out the number of idle TCH/Hs with
interference band 5.
Measurement This counter counts when querying the database periodically.
Point
Unit Times
C900060066
Definition Number of samples with UL RQ = 0
Description This counter counts the number of samples with Uplink (UL)
Receiving Quality (RQ) = 0. After BSC receives the
measurement report or preprocessing measurement report, if
the UL RQ = 0, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 0.
Measurement The counter increments if UL RQ = 0 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060067
Definition Number of samples with UL RQ = 1
Description This counter counts the number of samples with UL RQ = 1.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 1, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 1.
C900060068
Definition Number of samples with UL RQ = 2
Description This counter counts the number of samples with UL RQ = 2.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 2, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 2.
Measurement The counter increments if UL RQ = 2 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060069
Definition Number of samples with UL RQ = 3
Description This counter counts the number of samples with UL RQ = 3.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 3, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 3.
Measurement The counter increments if UL RQ = 3 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060070
Definition Number of samples with UL RQ = 4
Description This counter counts the number of samples with UL RQ = 4.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 4, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 4.
Measurement The counter increments if UL RQ = 4 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060071
Definition Number of samples with UL RQ = 5
Description This counter counts the number of samples with UL RQ = 5.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 5, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 5.
Measurement The counter increments if UL RQ = 5 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060072
Definition Number of samples with UL RQ = 6
Description This counter counts the number of samples with UL RQ = 6.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 6, the counter increments.
C900060073
Definition Number of samples with UL RQ = 7
Description This counter counts the number of samples with UL RQ = 7.
After BSC receives the measurement report or preprocessing
measurement report, if the UL RQ = 7, the counter increments.
Usage This counter is used to count the number of samples with UL RQ
= 7.
Measurement The counter increments if UL RQ = 7 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060074
Definition Number of samples with DL RQ = 0
Description This counter counts the number of samples with Downlink (DL)
RQ = 0. After BSC receives the measurement report or
preprocessing measurement report, if the DL RQ = 0, the
counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 0.
Measurement The counter increments if DL RQ = 0 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060075
Definition Number of samples with DL RQ = 1
Description This counter counts the number of samples with DL RQ = 1.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 1, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 1.
Measurement The counter increments if DL RQ = 1 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060076
Definition Number of samples with DL RQ = 2
Description This counter counts the number of samples with DL RQ = 2.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 2, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 2.
Measurement The counter increments if DL RQ = 2 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060077
Definition Number of samples with DL RQ = 3
Description This counter counts the number of samples with DL RQ = 3.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 3, the counter increments.
Usage
C900060078
Definition Number of samples with DL RQ = 4
Description This counter counts the number of samples with DL RQ = 4.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 4, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 4.
Measurement The counter increments if DL RQ = 4 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060079
Definition Number of samples with DL RQ = 5
Description This counter counts the number of samples with DL RQ = 5.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 5, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 5.
Measurement The counter increments if DL RQ = 5 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060080
Definition Number of samples with DL RQ = 6
Description This counter counts the number of samples with DL RQ = 6.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 6, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 6.
Measurement The counter increments if DL RQ = 6 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060081
Definition Number of samples with DL RQ = 7
Description This counter counts the number of samples with DL RQ = 7.
After BSC receives the measurement report or preprocessing
measurement report, if the DL RQ = 7, the counter increments.
Usage This counter is used to count the number of samples with DL RQ
= 7.
Measurement The counter increments if DL RQ = 7 in the measurement report
Point or preprocessing measurement report that BSC receives.
Unit Times
C900060082
Definition Number of TCH/F handover attempts due to UL strength
Description This counter counts the number of handover attempts due to UL
receiving strength too low on TCH/F channel.
Usage This counter is used to find out the frequency of handover due to
UL receiving strength on TCH/F channel. If the counter’s value is
too large, it indicates poor UL level on TCH/F channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to UL strength, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060083
Definition Number of TCH/F handover attempts due to DL strength
Description This counter counts the number of times of handover attempts
due to DL receiving strength too low on TCH/F channel.
Usage This counter is used to find out the frequency of handover due to
DL receiving strength on TCH/F channel. If the counter’s value is
too large, it indicates poor DL level on TCH/F channel.
C900060084
Definition Number of TCH/F handover attempts due to UL quality
Description This counter counts the number of handover attempts due to UL
quality too poor on TCH/F channel.
Usage This counter is used to find out the frequency of handover due to
UL quality on TCH/F channel. If the counter’s value is too large,
it indicates poor UL quality on TCH/F channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to UL quality, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060085
Definition Number of TCH/F handover attempts due to DL quality
Description This counter counts the number of handover attempts due to DL
quality too poor on TCH/F channel.
Usage This counter is used to find out the frequency of handover due to
DL quality on TCH/F channel. If the counter’s value is too large,
it indicates poor DL quality on TCH/F channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to DL quality, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060086
Definition Number of TCH/F handover attempts due to UL interference
Description This counter counts the number of handover attempts due to UL
interference too large on TCH/F channel.
Usage
C900060087
Definition Number of TCH/F handover attempts due to DL interference
Description This counter counts the number of handover attempts due to DL
interference too large on TCH/F channel.
Usage This counter is used to find out the frequency of handover due to
DL interference on TCH/F channel. If the counter’s value is too
large, it indicates large DL interference on TCH/F channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to DL interference, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060088
Definition Number of TCH/F handover attempts due to good C/I
Description This counter counts the number of MS handover attempts due to
too large C/I ratio on TCH/F channel. The handover only occurs
during sub-cell configuration; when C/I algorithm is adopted, MS
performs handover from external circle to internal circle.
Usage This counter is used to find out the frequency of MS handover
due to too large C/I ratio on TCH/F channel. If the counter’s
value is too large, it indicates that, after MS accesses the
external circle, MS performs handover to the internal circle many
times due to good C/I ratio and the internal circle absorbs the
traffic.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to too large C/I ratio, this counter increments.
The measurement point is A, as shown in Figure 124.
Unit Times
C900060089
Definition Number of TCH/F handover attempts due to bad C/I
Description This counter counts the number of MS handover attempts due to
too low C/I ratio on TCH/F channel. The handover only occurs
during sub-cell configuration; when C/I algorithm is adopted, MS
performs handover from internal circle to external circle.
Usage This counter is used to find out the frequency of MS handover
due to too low C/I ratio on TCH/F channel. If the counter’s value
is too large, it indicates that, when MS calls within the internal
circle, MS performs handover to the external circle many times
due to poor C/I ratio. Interference within the internal circle is big,
and C/I ratio of the internal circle can be improved by adjusting
the carrier power.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to too low C/I ratio, this counter increments.
The measurement point is A, as shown in Figure 124.
Unit Times
C900060090
Definition Number of TCH/F handover attempts due to PBGT
Description This counter counts the number of MS handover attempts due to
PBGT value on TCH/F channel. If PBGT value is larger than zero,
it indicates the adjacent cell has better radio environment than
the current cell. If the number of times that PBGT value is larger
than zero reaches the threshold, PBGT handover occurs.
Usage This counter is used to find out the frequency of MS handover
due to PBGT value on TCH/F channel. If the counter’s value is
too large, it indicates that signal on TCH/F channel within the
current cell is poorer than that in the adjacent cell.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to PBGT value, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060091
Definition Number of TCH/F handover attempts due to large TA
Description This counter counts the number of MS handover attempts due to
too large TA on TCH/F channel. Increasing TA indicates that MS
is moving away from the current cell. When the distance reaches
a certain value, handover will occur due to too large TA.
Usage This counter is used to find out the frequency of MS handover
due to too large TA on TCH/F channel. The counter’s value
reflects the mobility of subscribers in the current cell to a certain
extent.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to too large TA, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060092
Definition Number of TCH/F handover attempts due to other reasons
Description This counter counts the number of handover attempts due to
any other reason beyond the handover reasons mentioned
previously.
Usage This counter is used to find out the frequency of handover due to
any other reason.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/F channel. If handover decision succeeds and the
handover is due to any other reason beyond the handover
reasons mentioned previously, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060093
Definition Number of BSC-controlled inter-cell outgoing handover
Description This counter counts the number of intra-BSC inter-cell handover-
out executions. The execution here means the radio resource of
target cell has been successfully requested, and system returns
the message of radio resource available.
Usage This counter is used to find out the frequency of intra-BSC inter-
cell outgoing handover execution. It is one of the parameters
that evaluate radio environment, and it reflects the handover
situation.
Measurement During the handover process, if the target cell requests for
Point channel successfully, it sends the message of radio resource
available back to the source cell. The source cell performs
judgment after receiving the message. If the request is due to
intra-BSC inter-cell handover, this counter increments. The
measurement point is A, as shown in Figure 125.
CHL_ACT
CHL_ACT_ACK
HO_CMD A
HO_CMD
HO_ACCESS
HO DETECT
Phy Info
SABM EST_IND
UA
HO_COM
HO_COM
HO_PERFORM
Unit Times
C900060094
Definition Number of BSC-controlled inter-cell outgoing handover success
Description This counter counts the number of successful intra-BSC inter-cell
outgoing handovers.
Usage This counter is used to find out the frequency of successful intra-
BSC inter-cell outgoing handover. It is one of the parameters
that evaluate the handover situation.
Measurement During the handover process, when the source cell receives the
Point handover completion message from the target cell, it indicates
that MS has accessed the target channel and handover succeeds.
In this case, this counter increments. The measurement point is
A, as shown in Figure 126.
CHL_ACT
CHL_ACT_ACK
HO_CMD
HO_CMD
HO_ACCESS
HO DETECT
Phy Info
SABM EST_IND
UA
HO_COM
HO_COM
A HO_PERFORM
Unit Times
C900060095
Definition Number of MSC-controlled outgoing handover
Description This counter counts the number of MSC-controlled inter-BSC
outgoing handover executions.
Usage This counter is used to find out the frequency of MSC-controlled
inter-BSC outgoing handover execution, and it reflects the
handover situation.
Measurement BSC performs handover decision after receiving MS
Point measurement report. If the handover decision indicates inter-cell
handover and the currently attempted cell is a cell under
another BSC, the source BSC sends the handover request
message A_HO_RQD to MSC to trigger inter-BSC handover. If
the source BSC receives the handover command returned from
MSC, the counter increments. The measurement point is A, as
shown in Figure 127.
Unit Times
C900060096
Definition Number of MSC-controlled outgoing handover success
Description This counter counts the number of successful MSC-controlled
inter-BSC outgoing handovers.
Usage This counter is used to find out the frequency of successful MSC-
controlled inter-BSC outgoing handover, and it reflects the
handover situation.
Measurement BSC performs handover decision after receiving MS
Point measurement report. If the handover decision indicates inter-cell
handover and the currently attempted cell is a cell under
another BSC, the source BSC sends the handover request
message A_HO_RQD to MSC to trigger inter-BSC handover. If
MS successfully accesses the target cell, the source cell receives
the release command issued by MSC. In this case, this counter
increments. The measurement point is A, as shown in Figure 128.
Unit Times
C900060097
Definition Number of BSC-controlled inter-cell incoming handover
Description This counter counts the number of BSC-controlled inter-cell
incoming handover executions.
Usage This counter is used to find out the frequency of BSC-controlled
inter-cell incoming handover execution. It is one of the
parameters that evaluate radio environment, and it reflects the
handover situation.
Measurement If channel activation succeeds in the target cell within BSC and
Point the request is due to inter-cell handover, the counter increments.
The measurement point is A, as shown in Figure 129.
Unit Times
C900060098
Definition Number of BSC-controlled inter-cell incoming handover success
Description This counter counts the number of successful BSC-controlled
inter-cell incoming handovers.
Usage This counter shows the frequency of successful BSC-controlled
inter-cell incoming handover, and it reflects the handover
situation.
Measurement When the target cell within BSC receives the handover
Point completion message, if the request is due to BSC-controlled
inter-cell handover, the counter increments. The measurement
point is A, as shown in Figure 130.
BSC BTS
HO_ CMD
Unit Times
C900060099
Definition Number of MSC-controlled incoming handover
Description This counter counts the number of MSC-controlled inter-BSC
incoming handover executions.
Usage This counter is used to find out the frequency of MSC-controlled
inter-BSC incoming handover executions. It is one of the
Unit Times
C900060100
Definition Number of MSC-controlled incoming handover due to forced
release
Description During MSC-controlled inter-BSC incoming handover process,
the counter counts the number of forced release executions due
to no available radio resource in the target cell.
Usage This counter is used to find out the frequency of forced release
executions during MSC-controlled inter-BSC incoming handover
process. It reflects the handover situation.
Measurement The target cell receives the radio channel request message. If
Point the request is due to MSC-controlled inter-BSC incoming
handover and the target cell has no available radio channels,
forced release is attempted. If the target cell receives the
message of resource available returned by the forced release
instance, the counter increments. The measurement point is A,
as shown in Figure 132.
Unit Times
C900060101
Definition Number of MSC-controlled incoming handover due to queue
Description During MSC-controlled inter-BSC incoming handover process,
the counter counts the number of queuing executions due to no
available radio resource in the target cell.
Usage This counter is used to find out the frequency of queuing
executions during MSC-controlled inter-BSC incoming handover
process, and it reflects the handover situation.
Measurement The target cell receives the radio channel request message. If
Point the request is due to MSC-controlled inter-BSC incoming
handover and the target cell has no available radio channels, the
target instance is added to the waiting queue. When the target
cell receives the message of resource available, the counter
increments. The measurement point is A, as shown in Figure 133.
Unit Times
C900060102
Definition Number of MSC-controlled incoming handover success
Unit Times
C900060103
Definition Number of incoming handover from undefined layer (GSM900)
to current layer(GSM1800)
Description This counter counts the number of incoming handover
executions from the undefined layer cell (GSM900) to the target
cell (GSM1800) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the undefined layer cell (GSM900) to
target cell (GSM1800). It reflects the handover situation.
Measurement When the target cell (GSM1800) within BSC receives the channel
Point activation response message, if the request is due to BSC-
controlled inter-cell handover and the source cell (GSM900) is
the undefined layer cell, the counter increments. The
measurement point is A, as shown in Figure 129.
Unit Times
C900060104
Definition Number of incoming handover success from undefined
layer(GSM900) to current layer (GSM1800)
Description This counter counts the number of successful incoming handover
from the undefined layer cell (GSM900) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
C900060105
Definition Number of incoming handover from undefined layer (GSM1800)
to current layer (GSM900)
Description This counter counts the number of incoming handover
executions from the undefined layer cell (GSM1800) to the
target cell (GSM900) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the undefined layer cell (GSM1800) to
target cell (GSM900). It reflects the handover situation.
Measurement When the target cell (GSM900) within BSC receives the channel
Point activation response message, if the request is due to BSC-
controlled inter-cell handover and the source cell (GSM1800) is
the undefined layer cell, the counter increments. The
measurement point is A, as shown in Figure 129.
Unit Times
C900060106
Definition Number of incoming handover success from undefined
layer(GSM1800) to current layer(GSM900)
Description This counter counts the number of successful incoming handover
from the undefined layer cell (GSM1800) to the target cell
(GSM900) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of successful
incoming handover from the undefined layer cell (GSM1800) to
the target cell (GSM900). It reflects the handover situation.
Measurement When the target cell (GSM900) within BSC receives the
Point handover completion message, if the request is due to BSC-
controlled inter-cell handover and the source cell (GSM1800) is
the undefined layer cell, the counter increments. The
measurement point is A, as shown in Figure 130.
Unit Times
C900060107
Definition Number of incoming handover from the same layer GSM900 to
GSM1800
Description This counter counts the number of incoming handover
executions from the cell (GSM900) to the target cell (GSM1800)
in the same layer during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the cell (GSM900) to the target cell
(GSM1800) in the same layer. It reflects the handover situation.
Measurement When the target cell (GSM1800) receives the channel activation
Point response message, if the request is due to BSC-controlled inter-
cell handover and the source cell (GSM900) is in the same layer,
the counter increments. The measurement point is A, as shown
in Figure 129.
Unit Times
C900060108
Definition Number of incoming handover success from the same layer
GSM900 to GSM1800
Description This counter counts the number of successful incoming
handovers from the cell (GSM900) to the target cell (GSM1800)
in the same layer during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of successful
incoming handover from the cell (GSM900) to the target cell
(GSM1800) in the same layer. It reflects the handover situation.
Measurement When the target cell (GSM1800) receives the handover
Point completion message, if the request is due to BSC-controlled
inter-cell handover and the source cell (GSM900) is in the same
layer, the counter increments. The measurement point is A, as
shown in Figure 130.
Unit Times
C900060109
Definition Number of incoming handover from GSM900 to GSM1800 from
the upper layer
Description This counter counts the number of incoming handover
executions from the upper layer cell (GSM900) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
Usage
C900060110
Definition Number of incoming handover success from GSM900 to
GSM1800 in the upper layer
Description This counter counts the number of successful incoming
handovers from the upper layer cell (GSM900) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
C900060111
Definition Number of incoming handover from GSM900 to GSM1800 in the
lower layer
Description This counter counts the number of incoming handover
executions from the lower layer cell (GSM900) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the lower layer cell (GSM900) to the
target cell (GSM1800). It reflects the handover situation.
Measurement When the target cell (GSM1800) receives the channel activation
Point response message, if the request is due to BSC-controlled inter-
cell handover and the source cell (GSM900) is in the lower layer,
the counter increments. The measurement point is A, as shown
in Figure 129.
Unit Times
C900060112
Definition Number of incoming handover success from GSM900 to
GSM1800 in the lower layer
Description This counter counts the number of successful incoming
handovers from the lower layer cell (GSM900) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of successful
incoming handover from the lower layer cell (GSM900) to the
target cell (GSM1800). It reflects the handover situation.
Measurement When the target cell (GSM1800) receives the handover
Point completion message, if the request is due to BSC-controlled
inter-cell handover and the source cell (GSM900) is in the lower
layer, the counter increments. The measurement point is A, as
shown in Figure 130.
Unit Times
C900060113
Definition Number of incoming handover from GSM1800 to GSM900 from
the same layer
Description This counter counts the number of incoming handover
executions from the cell (GSM1800) to the target cell (GSM900)
in the same layer during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the cell (GSM1800) to the target cell
(GSM900) in the same layer. It reflects the handover situation.
Measurement When the target cell (GSM900) receives the channel activation
Point response message, if the request is due to BSC-controlled inter-
cell handover and the source cell (GSM1800) is in the same
layer, the counter increments. The measurement point is A, as
shown in Figure 129.
Unit Times
C900060114
Definition Number of incoming handover success from GSM1800 to
GSM900 from the same layer
Description This counter counts the number of successful incoming
handovers from the cell (GSM1800) to the target cell (GSM900)
in the same layer during BSC-controlled inter-cell handover.
Usage
C900060115
Definition Number of incoming handover from GSM1800 to GSM900 from
the upper layer
Description This counter counts the number of incoming handover
executions from the upper layer cell (GSM1800) to the target
cell (GSM900) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the upper layer cell (GSM1800) to the
target cell (GSM900). It reflects the handover situation.
Measurement When the target cell (GSM900) receives the channel activation
Point response message, if the request is due to BSC-controlled inter-
cell handover and the source cell (GSM1800) is in the upper
layer, the counter increments. The measurement point is A, as
shown in Figure 129.
Unit Times
C900060116
Definition Number of incoming handover success from GSM1800 to
GSM900 from the upper layer
Description This counter counts the number of successful incoming
handovers from the upper layer cell (GSM1800) to the target cell
(GSM900) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of successful
incoming handover from the upper layer cell (GSM1800) to the
target cell (GSM900). It reflects the handover situation.
Measurement When the target cell (GSM900) receives the handover
Point completion message, if the request is due to BSC-controlled
inter-cell handover and the source cell (GSM1800) is in the
upper layer, the counter increments. The measurement point is
A, as shown in Figure 130.
Unit Times
C900060117
Definition Number of incoming handover from GSM1800 to GSM900 from
the lower layer
Description This counter counts the number of incoming handover
executions from the lower layer cell (GSM1800) to the target cell
(GSM1800) during BSC-controlled inter-cell handover.
Usage This counter is used to find out the frequency of incoming
handover executions from the lower layer cell (GSM1800) to the
target cell (GSM1800). It reflects the handover situation.
Measurement When the target cell (GSM900) receives the channel activation
Point response message, if the request is due to BSC-controlled inter-
cell handover and the source cell (GSM1800) is in the lower
layer, the counter increments. The measurement point is A, as
shown in Figure 129.
Unit Times
C900060118
Definition Number of incoming handover success from GSM1800 to
GSM900 from the lower layer
Description This counter counts the number of successful incoming
handovers from the lower layer cell (GSM1800) to the target cell
(GSM900) during BSC-controlled inter-cell handover.
C900060119
Definition Number of Intra-cell handover
Description This counter counts the number of intra-cell handover
executions which is initiated by MS in the source cell. Here, the
execution means that radio resource is requested successfully
and the message of resource available is returned.
Unit Times
C900060120
Definition Number of Intra-cell handover success
Description This counter counts the number of successful intra-cell
handovers which are initiated by MS in the source cell.
Usage This counter is used to find out the frequency of successful intra-
cell handover. It is one of the parameters that evaluate
handover.
Measurement During the intra-cell handover process, if the source instance
Point receives the handover completion message returned by the
target instance, it indicates MS accesses the target channel and
handover succeeds. In this case, this counter increments. The
measurement point is A, as shown in Figure 136.
Unit Times
C900060121
Definition Maximum number of busy TCH/H
Description This counter counts the maximum number of occupied TCH/Hs
in a cell during a measurement period.
The system records the TCH/Hs occupied in the cell. If a TCH/H
is successfully occupied, the number of occupied TCH/Hs
increases by 1; if a TCH/H is released, the number of occupied
TCH/Hs decreases by 1. After a TCH/H is occupied, before a
TCH/H is released, or when the system reports the periodical
measurement data, if this counter’s value is less than the
number of actual occupied TCH/Hs, this counter’s value will be
replaced by the actual number of occupied TCH/Hs.
In consideration of the TCH/H channel occupation situation in
the last measurement period, the number of occupied TCH/Hs is
updated before the release of a TCH/H.
Usage This counter is used to find out the maximum number of
occupied TCH/Hs in a cell during a measurement period. The
counter’s value reflects the instantaneous occupation and the
heaviest traffic of TCH/H.
Measurement The counter counts at the following three time points:
Point
After the TCH/H is occupied successfully, if the maximum
number of busy TCH/Hs exceeds the counter’s recorded
value;
Before the TCH/H is released, if the maximum number of
busy TCH/Hs exceeds the counter’s recorded value;
When the system reports the periodical measurement data, if
the maximum number of busy TCH/Hs exceeds the counter’s
recorded value.
The measurement point is A, as shown in Figure 137.
BSC OMCR
Measurement Data
Unit Times
C900060122
Definition Average number of available SDCCH
Description This counter counts the number of SDCCHs which can be
assigned normally, including idle SDCCH and occupied SDCCH.
Usage This counter is used to find out the number of available SDCCHs
in the current cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060123
Definition Average number of unavailable SDCCH
Description This counter counts the number of SDCCHs that can not be
assigned normally, including those SDCCHs blocked due to
various reasons.
Usage This counter is used to find out the number of unavailable
SDCCHs to facilitate troubleshooting.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060124
Definition SDCCH busy time
Description This counter counts the busy time of SDCCHs, which reflects the
traffic volume of SDCCH.
Usage This counter is used to find out the busy level and the average
occupation time of the signaling channel. It can be used as a
reference for judging whether to increase the number of SDCCHs.
Measurement The counter counts at the following three time points:
Point
When an SDCCH is acquired successfully, this counter
calculates time and accumulates.
When an SDCCH is released, this counter calculates time and
accumulates.
When the system reports the periodical measurement data,
this counter calculates time and accumulates.
C900060125
Definition Average number of available radio channel
Description This counter counts the number of radio channel which can be
assigned normally, including idle radio channel and occupied
radio channel.
Usage This counter is used to find out the number of available radio
channel in the current cell. It helps understand the current
resource usage situation of the cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060126
Definition Average number of unavailable radio channel
Description This counter counts the number of radio channels that can not
be assigned normally, including those radio channels blocked
due to various reasons.
Usage This counter is used to find out the number of unavailable radio
channels in the current cell. It helps understand the current
resource usage situation of the cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060127
Definition TCH/H busy time
Description This counter counts the busy time of TCH/Hs, which reflects the
traffic volume of TCH/H.
Usage This counter is used to find out the busy level and the average
occupation time of TCH/H. It can be used as a reference for
judging whether to increase the number of TCH/Hs.
Measurement The counter counts at the following three time points:
Point
When a TCH/H is acquired successfully, this counter
calculates time and accumulates.
When a TCH/H is released, this counter calculates time and
accumulates.
When the system reports the periodical measurement data,
this counter calculates time and accumulates.
The measurement point is A, as shown in Figure 137.
The measurement formula is as follows:
Measurement value = (Current time – Last measurement
time point) × Number of MSs that are occupying the
channels
The reported measurement value is accumulated by each
measurement value. After each accumulation, the last
measurement time point is updated to the current time. If a
TCH/H is acquired successfully, Number of MSs that are
occupying the channels increases by 1; if a TCH/H is
released, Number of MSs that are occupying the
channels decreases by 1.
Unit Second
C900060128
Definition Maximum number of busy TCH/F
Description This counter counts the maximum number of occupied TCH/Fs in
a cell during a measurement period.
The system records the TCH/Fs occupied in the cell. If a TCH/F is
successfully occupied, the number of occupied TCH/Fs increases
by 1; if a TCH/F is released, the number of occupied TCH/Hs
decreases by 1. After a TCH/F is occupied, before a TCH/F is
released, or when the system reports the periodical
measurement data, if this counter’s value is less than the
number of actual occupied TCH/Fs, this counter’s value will be
replaced by the actual number of occupied TCH/Fs.
C900060129
Definition TCH/F busy time
Description This counter counts the busy time of TCH/Fs, which reflects the
traffic volume of TCH/F.
Usage This counter is used to find out the busy level and the average
occupation time of TCH/F. It can be used as a reference for
judging whether to increase the number of TCH/Fs.
Measurement The counter counts at the following three time points:
Point
When a TCH/F is acquired successfully, this counter
calculates time and accumulates.
When a TCH/F is released, this counter calculates time and
accumulates.
When the system reports the periodical measurement data,
this counter calculates time and accumulates.
The measurement point is A, as shown in Figure 137.
The measurement formula is as follows:
Measurement value = (Current time – Last measurement
time point) × Number of MSs that are occupying the
channels
The reported measurement value is accumulated by each
measurement value. After each accumulation, the last
measurement time point is updated to the current time. If a
TCH/F is acquired successfully, Number of MSs that are
occupying the channels increases by 1; if a TCH/F is
C900060130
Definition Number of healthy TRXs
Description This counter counts the number of the TRXs that can be used
normally.
Usage This counter is used to find out the number of available TRXs
and resource usage in the current cell to facilitate
troubleshooting.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060131
Definition Number of CM service requests of MOC
Description This counter counts the number of accesses due to CM SERVICE
REQ of MOC. After BSC receives the EST_IND message, if the
access cause in the layer-3 information in this message is “CM
SERVICE REQ”, this counter increments.
Usage This counter is used to find out the frequency of the access due
to CM SERVICE REQ of MOC.
Measurement This counter counts when BSC receives the EST_IND message.
Point The measurement point is A4, as shown in Figure 99.
Unit Times
C900060132
Definition Number of SAPI3 link establishment success on SDCCH (MT-SM)
Description This counter counts the number of successful short message link
establishment of mobile terminating call on SDCCH. On SDCCH,
if BSC receives the EST_CONF message sent by BTS after BSC
initiates the short message link establishment flow, it indicates
this link establishment succeeds, and the counter increments.
Usage This counter is used to find out the frequency of successful SAPI
3 link establishments on SDCCH.
Measurement This counter counts when BSC receives the EST_CONF message
Point (SAPI = 3) from BTS. The measurement point is D2, as shown in
Figure 121.
Unit
Times
C900060133
Definition Number of available defined SDCCH
Description iBSC supports dynamic conversion of SDCCH and TCH. This
counter counts the number of available SDCCH configured by
OMCR in the current cell.
Usage This counter is used to find out the number of available SDCCH
in the current cell to facilitate eliminating fault in the cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060134
Definition Number of available defined TCH/F
Description iBSC supports the function of full dynamic radio channel. This
counter counts the number of available TCH/F configured by
OMCR in the current cell.
Usage This counter is used to find out the number of available TCH/F in
the current cell to facilitate eliminating fault in the cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060135
Definition Number of signaling TCH/H assignment failure
Description This counter counts the number of failing to assign TCH/H
channel as a signaling channel.
Usage After BSC responds to the channel request message to allocate
and occupy TCH/H successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If BSC does not receive
the MS access notification within a certain time, this assignment
fails.
C900060136
Definition Number of MOC access attempts
Description This counter counts the number of channel requests due to
Mobile Originated Call (MOC). When MS sends the CHL_REQ
message through BTS to BSC to request for radio channel, if TA
does not exceed the cell range and the access cause is ‘MOC’,
this counter increments.
Usage This counter is used to find out the frequency of channel
requests due to the access cause ‘MOC’.
Measurement This counter counts when MS requests for channel from BSC and
Point TA does not exceed the cell range. The measurement point is A1,
as shown in Figure 99.
Unit Times
C900060137
Definition Number of wireless access due to paging responses
Description This counter counts the number of accesses due to paging
responses. After BSC receives the EST_IND message, if the
access cause in the layer-3 information in this message is
‘paging responses’, this counter increments.
Usage This counter is used to find out the frequency of the access due
to paging responses.
Measurement This counter counts when BSC receives the EST_IND message.
Point The measurement point is A4, as shown in Figure 99.
Unit Times
C900060138
Definition Number of TCH/F allocation failure due to BTS connection failure
for assignment (speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure when assigning voice
channel (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
Unit Times
C900060139
Definition Number of TCH/F allocation failure due to BIU connection failure
for assignment (speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure when assigning voice
channel (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during BIU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060140
Definition Number of TCH/F allocation failure due to TCU connection failure
for assignment (speech version1)
C900060141
Definition Number of TCH/F allocation failure due to channel activation
failure for assignment (speech version2)
Description This counter counts the number of TCH/F channel allocation
failure due to channel activation failure when assigning speech
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/F. If the channel activation
fails due to receiving channel activation failure message,
incorrect channel activation response message, T9103 timeout,
channel instance being released or channel being released
forcibly, this counter accumulates.
Measurement BSC activates TCH/F as voice channel (using speech version 2)
Point for assignment, but the problem such as receiving channel
activation failure message, incorrect channel activation response
message, T9103 timeout, channel instance being released, or
channel being forcibly released occurs. The measurement point
is B3, as shown in Figure 118.
Unit Times
C900060142
Definition Number of TCH/F allocation failure due to BTS connection failure
for assignment (speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure when assigning voice
channel (using speech version 2).
C900060143
Definition Number of TCH/F allocation failure due to BIU connection failure
for assignment (speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure when assigning voice
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during BIU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060144
Definition Number of TCH/F allocation failure due to TCU connection failure
for assignment (speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure when assigning voice
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during TCU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060145
Definition Number of TCH/F allocation failure due to BTS connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during CMM
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060146
Definition Number of TCH/F allocation failure due to BIU connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during BIU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060147
Definition Number of TCH/F allocation failure due to TCU connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during TCU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060148
Definition Number of TCH/F allocation failure due to BTS connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure when assigning data
channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message or timer timeout occurs during CMM
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060149
Definition Number of data TCH/F allocation failure due to BIU connection
failure for assignment
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure when assigning data
channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but receives connection failure
Point message, incorrect connection response message or timer
timeout during BIU connection process. The measurement point
is B2, as shown in Figure 138.
Unit Times
C900060150
Definition Number of data TCH/F allocation failure due to TCU connection
failure for assignment
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure when assigning data
channel.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for assignment, but receiving connection failure
Point message, incorrect connection response message or timer
timeout during TCU connection process. The measurement point
is B2, as shown in Figure 138.
Unit Times
C900060151
Definition Number of voice TCH/H drops due to handover failure
Description This counter counts the number of call drops due to handover
failure on TCH/H voice channel. Call drop occurs after MS
C900060152
Definition Number of Abis interface paging command messages
Description This counter counts the number of paging command messages
from A-interface. These messages are part of Abis interface
messages sent from BSC.
Usage This counter is used to find out the frequency of transmitting
paging command messages at Abis interface. These messages
are from A-interface.
Measurement When BSC sends ABIS_INTER_PAGING_CMD message to BTS,
Point this counter increments. The measurement point is A, as shown
in Figure 139.
Unit Times
C900060153
Definition Number of Abis CS paging messages
Description This counter counts the number of CS paging command
messages from Gb interface. These messages are part of Abis
interface messages sent from BSC.
C900060154
Definition Number of Abis PS paging messages
Description This counter counts the number of PS paging command
messages from Gb interface. These messages are part of Abis
interface messages sent from BSC.
Usage This counter is used to find out the frequency of transmitting PS
paging command messages at Abis interface. These messages
are from Gb interface.
Measurement When BSC sends ABIS_INTER_PSPAGING_CMD message to BTS,
Point this counter increments. The measurement point is A, as shown
in Figure 139.
Unit Times
C900060155
Definition Number of available defined TCH/H
Description iBSC supports the function of full dynamic radio channel. This
counter counts the number of available TCH/H channel
configured by OMCR in the current cell.
Usage This counter is used to find out the number of available TCH/H
channel in the current cell to eliminate the fault in the cell.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060156
Definition Number of TCH/F allocation failure due to channel activation
failure for handover(speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to channel activation failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/F. If channel activation fails due to
receiving channel activation failure message, incorrect channel
activation response message, T9103 being timeout, channel
instance being released or channel being forcibly released, this
counter accumulates.
Measurement BSC activates TCH/F channel as voice channel due to handover,
Point but receives channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released. The measurement point is C3 as shown in Figure 112
and D3 as shown in Figure 113.
Unit Times
C900060157
Definition Number of TCH/F allocation failure due to BTS connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
Unit Times
C900060158
Definition Number of TCH/F allocation failure due to BIU connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060159
Definition Number of TCH/F allocation failure due to TCU connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during TCU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060160
Definition Number of TCH/F allocation failure due to channel activation
failure for handover(speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to channel activation failure during voice channel
handover (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/F. If channel activation fails due to
receiving channel activation failure message, incorrect channel
activation response message, T9103 being timeout, channel
instance being released or channel being forcibly released, this
counter accumulates.
Measurement BSC activates TCH/F channel as voice channel due to handover,
Point but receives channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released. The measurement point is C3 as shown in Figure 112
and D3 as shown in Figure 113.
Unit Times
C900060161
Definition Number of TCH/F allocation failure due to BTS connection failure
for handover (speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure during voice channel
handover (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
measurement point is C2 as shown in Figure 140 and D2 as
shown in Figure 141.
Unit Times
C900060162
Definition Number of TCH/F allocation failure due to BIU connection failure
for handover (speech version2)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure during voice channel
handover (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060163
Definition
C900060164
Definition Number of TCH/F allocation failure due to channel activation
failure for handover(speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to channel activation failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/F. If channel activation fails due to
receiving channel activation failure message, incorrect channel
activation response message, T9103 being timeout, channel
instance being released or channel being forcibly released, this
counter accumulates.
Measurement BSC activates TCH/F channel as voice channel due to handover,
Point but receives channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released. The measurement point is C3 as shown in Figure 112
and D3 as shown in Figure 113.
Unit Times
C900060165
Definition Number of TCH/F allocation failure due to BTS connection failure
for handover (speech version3)
Description
C900060166
Definition Number of TCH/F allocation failure due to BIU connection failure
for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060167
Definition Number of TCH/F allocation failure due to TCU connection failure
for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
C900060168
Definition Number of Voice TCH/F handover success
Description This counter counts the number of successful TCH/F channel
handover during voice channel handover.
When BSC detects the successful handover message sent by MS
on newly-allocated TCH/F channel, this counter accumulates.
The ASS_COM message indicates successful intra-cell handover,
and the HO_COM message indicates successful inter-cell
handover and external handover.
For intra-cell handover and inter-cell handover, the counter
accumulates on source instances. For external handover, the
counter accumulates on target instances because the source
instance is not under this BSC.
Measurement The counter counts when BSC receives the ASS_COM/HO_COM
Point message. The measurement point is C4 as shown in Figure 105
and Figure 106 and D4 as shown in Figure 107 and Figure 108.
Unit Times
C900060169
Definition Number of data TCH/F allocation failure due to channel
activation failure for handover
Description This counter counts the number of failing to allocate TCH/F
channel due to channel activation failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/F. If the channel activation fails due
to receiving channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released, this counter accumulates.
Measurement BSC activates TCH/F as data channel for handover, but receives
Point channel activation failure message, incorrect channel activation
C900060170
Definition Number of TCH/F allocation failure due to BTS connection failure
for handover
Description This counter counts the number of failing to allocate TCH/F
channel due to BTS connection failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
measurement point is C2 as shown in Figure 140 and D2 as
shown in Figure 141.
Unit Times
C900060171
Definition Number of TCH/F allocation failure due to BIU connection failure
for handover
Description This counter counts the number of failing to allocate TCH/F
channel due to BIU connection failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060172
Definition Number of TCH/F allocation failure due to TCU connection failure
for handover
Description This counter counts the number of failing to allocate TCH/F
channel due to TCU connection failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/F channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/F for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during TCU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060173
Definition Number of data TCH/F handover success
Description This counter counts the number of successful TCH/F channel
handover during data channel handover.
When BSC detects the successful handover message sent by MS
on newly-allocated TCH/F channel, this counter accumulates.
The ASS_COM message indicates successful intra-cell handover,
and the HO_COM message indicates successful inter-cell
handover and external handover.
For intra-cell handover and inter-cell handover, the counter
accumulates on source instances. For external handover, the
counter accumulates on target instances because the source
instance is not under this BSC.
Measurement The counter counts when BSC receives the ASS_COM/HO_COM
Point message. The measurement point is C4 as shown in Figure 105
and Figure 106 and D4 as shown in Figure 107 and Figure 108.
Unit Times
C900060174
Definition Number of signaling TCH/H allocation failure for assignment
Description This counter counts the number of TCH/H channel allocation
failures during signaling channel assignment.
C900060175
Definition Number of TCH/H allocation failure due to channel activation
failure for assignment (speech version1)
Description This counter counts the number of TCH/H channel allocation
failure due to channel activation failure when assigning voice
channel (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If the channel activation
fails due to receiving channel activation failure message,
incorrect channel activation response message, T9103 timeout,
channel instance being released or channel being released
forcibly, this counter accumulates.
Measurement BSC activates TCH/H as voice channel (using speech version 1)
Point for assignment, but the problem such as receiving channel
activation failure message, incorrect channel activation response
message, T9103 timeout, channel instance being released, or
channel being forcibly released occurs. The measurement point
is B3, as shown in Figure 118.
Unit Times
C900060176
Definition Number of TCH/H allocation failure due to BTS connection failure
for assignment (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure when assigning voice
channel (using speech version 1).
C900060177
Definition Number of TCH/H allocation failure due to BIU connection failure
for assignment (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to BIU connection failure when assigning voice
channel (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during BIU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060178
Definition Number of TCH/H allocation failure due to TCU connection failure
for assignment (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure when assigning voice
channel (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during TCU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060179
Definition Number of TCH/H allocation failure due to channel activation
failure for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to channel activation failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/H. If channel activation fails due to
receiving channel activation failure message, incorrect channel
activation response message, T9103 being timeout, channel
instance being released or channel being forcibly released, this
counter accumulates.
Measurement BSC activates TCH/H channel as voice channel due to handover,
Point but receives channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released. The measurement point is C3 as shown in Figure 112
and D3 as shown in Figure 113.
Unit Times
C900060180
Definition Number of TCH/H allocation failure due to BTS connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
C900060181
Definition Number of TCH/H allocation failure due to BIU connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to BIU connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060182
Definition Number of TCH/H allocation failure due to TCU connection failure
for handover (speech version1)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure during voice channel
handover (using speech version 1).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during TCU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060183
Definition Number of TCH/H allocation failure due to channel activation
failure for assignment (speech version2)
Description This counter counts the number of TCH/H channel allocation
failure due to channel activation failure when assigning voice
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If the channel activation
fails due to receiving channel activation failure message,
incorrect channel activation response message, T9103 timeout,
channel instance being released or channel being released
forcibly, this counter accumulates.
Measurement BSC activates TCH/H as voice channel (using speech version 2)
Point for assignment, but the problem such as receiving channel
activation failure message, incorrect channel activation response
message, T9103 timeout, channel instance being released, or
channel being forcibly released occurs. The measurement point
is B3, as shown in Figure 118.
Unit Times
C900060184
Definition Number of TCH/H allocation failure due to BTS connection failure
for assignment (speech version2)
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure when assigning voice
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during CMM
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060185
Definition Number of TCH/H allocation failure due to BIU connection failure
for assignment (speech version2)
C900060186
Definition Number of TCH/H allocation failure due to TCU connection failure
for assignment (speech version2)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure when assigning voice
channel (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during TCU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060187
Definition
C900060188
Definition Number of TCH/H allocation failure due to BTS connection failure
for handover (speech version2)
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure during voice channel
handover (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
measurement point is C2 as shown in Figure 140 and D2 as
shown in Figure 141.
Unit Times
C900060189
Definition Number of TCH/H allocation failure due to BIU connection failure
for handover (speech version2)
C900060190
Definition Number of TCH/H allocation failure due to TCU connection failure
for handover (speech version2)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure during voice channel
handover (using speech version 2).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during TCU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060191
Definition Number of TCH/H allocation failure due to channel activation
failure for assignment (speech version3)
Description This counter counts the number of TCH/H channel allocation
failure due to channel activation failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If the channel activation
fails due to receiving channel activation failure message,
C900060192
Definition Number of TCH/H allocation failure due to BTS connection failure
for assignment (speech version3)
C900060193
Definition Number of TCH/H allocation failure due to BIU connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to BIU connection failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during BIU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060194
Definition Number of TCH/H allocation failure due to TCU connection failure
for assignment (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure when assigning voice
channel (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message, or timer timeout occurs during TCU
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060195
Definition Number of TCH/H allocation failure due to channel activation
failure for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to channel activation failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/H. If channel activation fails due to
receiving channel activation failure message, incorrect channel
activation response message, T9103 being timeout, channel
instance being released or channel being forcibly released, this
counter accumulates.
Measurement BSC activates TCH/H channel as voice channel due to handover,
Point but receives channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
C900060196
Definition Number of TCH/H allocation failure due to BTS connection failure
for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
measurement point is C2 as shown in Figure 140 and D2 as
shown in Figure 141.
Unit Times
C900060197
Definition Number of TCH/H allocation failure due to BIU connection failure
for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to BIU connection failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060198
Definition Number of TCH/H allocation failure due to TCU connection failure
for handover (speech version3)
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure during voice channel
handover (using speech version 3).
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during TCU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060199
Definition Number of Voice TCH/H assignment success
Description This counter counts the number of successful assignments of
TCH/H as voice channel.
After BSC responds the channel request message to allocate and
occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. For assignment from A-
interface, after BSC receives the assignment success message,
the counter accumulates.
Measurement For assignment from A-interface, the counter accumulates when
Point BSC receives the assignment success message. The
measurement point is B5, as shown in Figure 115 and Figure
116.
Unit Times
C900060200
Definition Number of Voice TCH/H assignment failure
Description This counter counts the number of failing to assign TCH/H
channel as voice channel.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If BSC does not receive
C900060201
Definition Number of Voice TCH/H handover success
Description This counter counts the number of successful TCH/H channel
handover during voice channel handover.
When BSC detects the successful handover message sent by MS
on newly-allocated TCH/F channel, this counter accumulates.
The ASS_COM message indicates successful intra-cell handover,
and the HO_COM message indicates successful inter-cell
handover and external handover.
For intra-cell handover and inter-cell handover, the counter
accumulates on source instances. For external handover, the
counter accumulates on target instances because the source
instance is not under this BSC.
Measurement The counter counts when BSC receives the ASS_COM/HO_COM
Point message. The measurement point is C4 as shown in Figure 105
and Figure 106 and D4 as shown in Figure 107 and Figure 108.
Unit Times
C900060202
Definition Number of data TCH/H allocation failure due to channel
activation failure for assignment
Description This counter counts the number of TCH/H channel allocation
failure due to channel activation failure during data channel
assignment.
After BSC responds the channel request message to allocate and
occupy TCH/H channel successfully, if connection succeeds, BSC
sends the CHL_ACT message to BTS to activate this TCH/H. If
channel activation fails due to receiving channel activation
failure message, incorrect channel activation response message,
T9103 being timeout, channel instance being released or
channel being forcibly released, this counter accumulates.
Measurement BSC activates TCH/H channel due to assignment and uses the
Point channel as data channel, but receives channel activation failure
message, incorrect channel activation response message, T9103
being timeout, channel instance being released, or channel being
C900060203
Definition Number of data TCH/H allocation failure due to BTS connection
failure for assignment
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure when assigning data
channel.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but the problem such as
Point receiving connection failure message, incorrect connection
response message or timer timeout occurs during CMM
connection process. The measurement point is B2, as shown in
Figure 138.
Unit Times
C900060204
Definition Number of data TCH/H allocation failure due to BIU connection
failure for assignment
C900060205
Definition Number of data TCH/H allocation failure due to TCU connection
failure for assignment
Description This counter counts the number of failing to allocate TCH/H
channel due to TCU connection failure when assigning data
channel.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the TCU
connection request to DRTB. If TCU connection fails due to
receiving TCU connection failure message, incorrect TCU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for assignment, but receiving connection failure
Point message, incorrect connection response message or timer
timeout during TCU connection process. The measurement point
is B2, as shown in Figure 138.
Unit Times
C900060206
Definition Number of data TCH/H allocation failure due to channel
activation failure for handover
Description This counter counts the number of failing to allocate TCH/H
channel due to channel activation failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, if the connection
succeeds, BSC sends the channel activation message CHL_ACT
to BTS to activate this TCH/H. If the channel activation fails due
to receiving channel activation failure message, incorrect
channel activation response message, T9103 being timeout,
channel instance being released, or channel being forcibly
released, this counter accumulates.
Measurement BSC activates TCH/H as data channel for handover, but receives
Point channel activation failure message, incorrect channel activation
response message, T9103 being timeout, channel instance being
released, or channel being forcibly released. The measurement
point is C3 as shown in Figure 112 and D3 as shown in Figure
113.
Unit Times
C900060207
Definition Number of data TCH/H allocation failure due to BTS connection
failure for handover
Description This counter counts the number of failing to allocate TCH/H
channel due to BTS connection failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CMM
connection request to BTS. If BTS connection fails due to
receiving CMM connection failure message, incorrect CMM
connection response message, or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H channel for handover, but receives connection
Point failure message, incorrect connection response message, or
timer timeout during CMM connection process. The
measurement point is C2 as shown in Figure 140 and D2 as
shown in Figure 141.
Unit Times
C900060208
Definition Number of data TCH/H allocation failure due to BIU connection
failure for handover
Description This counter counts the number of failing to allocate TCH/H
channel due to BIU connection failure during data channel
handover.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the BIU
connection request to BIPB. If BIU connection fails due to
receiving BIU connection failure message, incorrect BIU
connection response message or timer timeout, this counter
accumulates.
Measurement BSC uses TCH/H for handover, but receives connection failure
Point message, incorrect connection response message, or timer
timeout during BIU connection process. The measurement point
is C2 as shown in Figure 140 and D2 as shown in Figure 141.
Unit Times
C900060209
Definition Number of data TCH/H allocation failure due to TCU connection
failure for handover
Description
C900060210
Definition Number of data TCH/H assignment success
Description This counter counts the number of successful assignments of
TCH/H as data channel.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. For assignment from A-
interface, after BSC receives the assignment success message,
the counter accumulates.
Measurement For assignment from A-interface, the counter accumulates when
Point BSC receives the assignment success message. The
measurement point is B5, as shown in Figure 115 and Figure
116.
Unit Times
C900060211
Definition Number of data TCH/H assignment failure
Description This counter counts the number of failing to assign TCH/H
channel as data channel.
After BSC responds to the channel request message to allocate
and occupy TCH/H channel successfully, BSC sends the CHL_ACT
message to BTS to activate this TCH/H. If BSC does not receive
the MS access notification within a certain time, this assignment
fails.
Measurement This counter counts when BSC receives assignment failure
Point message, abnormal message, channel instance being released,
channel instance being released forcibly, or timer timeout
message. The measurement point is B5, as shown in Figure 119.
Unit Times
C900060212
Definition Number of data TCH/H handover success
Description This counter counts the number of successful TCH/H channel
handover during data channel handover.
When BSC detects the successful handover message sent by MS
on newly-allocated TCH/H channel, this counter accumulates.
The ASS_COM message indicates successful intra-cell handover,
and the HO_COM message indicates successful inter-cell
handover and external handover.
For intra-cell handover and inter-cell handover, the counter
accumulates on source instances. For external handover, the
counter accumulates on target instances because the source
instance is not under this BSC.
Measurement The counter counts when BSC receives the ASS_COM/HO_COM
Point message. The measurement point is C4 as shown in Figure 105
and Figure 106 and D4 as shown in Figure 107 and Figure 108.
Unit Times
C900060213
Definition Number of BSC-controlled incoming handover due to forced
release
Description During BSC-controlled inter-cell incoming handover process, the
counter counts the number of forced release executions due to
no available radio resource in the target cell.
Usage This counter is used to find out the frequency of forced release
execution during BSC-controlled inter-cell incoming handover
process. It reflects the status of the handover flow.
Measurement The target cell within BSC receives the radio channel request
Point message. If the request is due to BSC-controlled inter-cell
incoming handover and the target cell has no available radio
channels, forced release is performed. When the target cell
receives the message of resource available returned by the
forced release instance, the counter increments. The
measurement point is A, as shown in Figure 142.
Unit Times
C900060214
Definition Number of BSC-controlled incoming handover due to queues
Description During BSC-controlled inter-cell incoming handover process, the
counter counts the number of queuing executions due to no
available radio resource in the target cell.
Usage This counter is used to find out the frequency of queuing
execution during BSC-controlled inter-cell incoming handover
process. It reflects the status of the handover flow.
Measurement The target cell within BSC receives the radio channel request
Point message. If the request is due to BSC-controlled inter-cell
incoming handover and the target cell has no available radio
channels, the target instance is added to the waiting queue.
When the target cell receives the message of resource available,
the counter increments. The measurement point is A, as shown
in Figure 143.
Unit Times
C900060215
Definition Number of BSC-controlled incoming handover due to forced
handover
Description During BSC-controlled inter-cell incoming handover process, the
counter counts the number of forced handover executions due to
no available radio resource in the target cell.
Usage This counter is used to find out the frequency of forced handover
execution during BSC-controlled inter-cell incoming handover
process. It reflects the status of the handover flow.
Measurement The target cell within BSC receives the radio channel request
Point message. If the request is due to BSC-controlled inter-cell
incoming handover and the target cell has no available radio
channels, the forced handover message is sent to the forced
handover instance and the target instance is added to the
waiting queue. When the target cell receives the message of
resource available, the counter increments. The measurement
point is A, as shown in Figure 144.
Unit Times
C900060216
Definition Number of MSC-controlled incoming handover due to forced
handover
Description During MSC-controlled inter-BSC incoming handover process,
the counter counts the number of forced handover executions
due to no available radio resource in the target cell.
Usage This counter is used to find out the frequency of forced handover
executions during MSC-controlled inter-BSC incoming handover
process. It reflects the status of the handover flow.
Measurement The target cell receives the radio channel request message. If
Point the request is due to MSC-controlled inter-BSC incoming
handover and the target cell has no available radio channels, the
forced handover message is sent to the forced handover
C900060217
Definition Number of unavailable defined TCH/H
Description iBSC supports the function of full dynamic radio channel. This
counter counts the number of unavailable TCH/H channel
configured by OMCR in the current cell.
Usage This counter is used to find out the number of unavailable TCH/H
channel in the current cell to facilitate eliminating the fault.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060218
Definition Number of unavailable defined TCH/F
Description iBSC supports the function of full dynamic wireless channel. This
counter counts the number of unavailable TCH/F channel
configured by OMCR in the current cell.
Usage This counter is used to find out the number of unavailable TCH/F
channel in the current cell to facilitate eliminating the fault.
Measurement Query the database when periodic measurement data is reported
Point to get the value of the counter. The measurement point is A, as
shown in Figure 137.
Unit Times
C900060219
Definition Number of signaling TCH/F drops due to handover failure
Description This counter counts the number of call drops due to handover
failure on TCH/F signaling channel. Call drop occurs after MS
requests for TCH/F signaling channel successfully. If the problem
is due to handover failure, the counter increments.
Presently, reasons for handover failure include T3107 timeout,
T3103 timeout and external handover timer timeout under the
status of ASSIGNING.
Usage This counter is used to find out the frequency of call drop due to
handover failure on TCH/F signaling channel.
Measurement TCH/F signaling channel is activated after BSC initiates the
Point handover flow. After that:
If RANCS is in the status of RADIO_APPLY and sends the
intra-cell handover command, then T3107 is started. If
RANCS is in the status of ASSIGN and T3107 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 122.
If RANCS is in the status of RADIO_APPLY and sends the
inter-cell handover command, then T3103 is started. If
RANCS is in the status of ASSIGN and T3103 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 123.
If RANCS is in the status of RADIO_APPLY and sends the
external handover command, then the external handover
timer is started. If RANCS is in the status of ASSIGN and the
external handover timer is timeout, then the counter
increments. The measurement point is A1, as shown in
Figure 145.
CC A2
Chan Act
Chan Act Ack
Ho Req Ack
Ho cmd
Ho Cmd HO Detec
HO Detec
A1 Est Ind
HO Complete
Clear Cmd
Unit Times
C900060220
Definition Number of voice TCH/F drops due to handover failure
Description This counter counts the number of call drops on TCH/F voice
channel due to handover failure. Call drop occurs after MS
requests for TCH/F voice channel successfully. The counter
increments if call drop is due to handover failure.
Presently, reasons for handover failure include T3107 timeout,
T3103 timeout and external handover timer timeout under the
status of ASSIGNING.
Usage
C900060221
Definition Number of data TCH/F drops due to handover failure
Description This counter counts the number of call drops on TCH/F data
channel due to handover failure. Call drop occurs after MS
requests for TCH/F data channel successfully. The counter
increments if call drop is due to handover failure.
Presently, reasons for handover failure include T3107 timeout,
T3103 timeout and external handover timer timeout under the
status of ASSIGNING.
Usage This counter is used to find out the frequency of call drop on
TCH/F data channel due to handover failure.
Measurement TCH/F data channel is activated after BSC initiates the handover
Point flow. After that:
If RANCS is in the status of RADIO_APPLY and sends the
intra-cell handover command, then T3107 is started. If
RANCS is in the status of ASSIGN and T3107 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 122.
If RANCS is in the status of RADIO_APPLY and sends the
inter-cell handover command, then T3103 is started. If
RANCS is in the status of ASSIGN and T3103 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 123.
C900060222
Definition Number of signaling TCH/H drops due to handover failure
Description This counter counts the number of call drops due to handover
failure on TCH/H signaling channel. Call drop occurs after MS
requests for TCH/H signaling channel successfully. If the
problem is due to handover failure, the counter increments.
Presently, reasons for handover failure include T3107 timeout,
T3103 timeout and external handover timer timeout under the
status of ASSIGNING.
Usage This counter is used to find out the frequency of call drop due to
handover failure on TCH/H signaling channel.
Measurement TCH/H signaling channel is activated after BSC initiates the
Point handover flow. After that:
If RANCS is in the status of RADIO_APPLY and sends the
intra-cell handover command, then T3107 is started. If
RANCS is in the status of ASSIGN and T3107 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 122.
If RANCS is in the status of RADIO_APPLY and sends the
inter-cell handover command, then T3103 is started. If
RANCS is in the status of ASSIGN and T3103 is timeout, then
the counter increments. The measurement point is A, as
shown in Figure 123.
If RANCS is in the status of RADIO_APPLY and sends the
external handover command, then the external handover
timer is started. If RANCS is in the status of ASSIGN and the
external handover timer is timeout, then the counter
increments. The measurement point is A1, as shown in
Figure 145.
Unit Times
C900060223
Definition Number of data TCH/H drops due to handover failure
Description This counter counts the number of call drops due to handover
failure on TCH/H data channel. Call drop occurs after MS
C900060224
Definition Number of TCH/H handover attempts due to UL strength
Description This counter counts the number of handover attempts due to UL
receiving strength too low on TCH/H channel.
Usage This counter is used to find out the frequency of handover due to
UL receiving strength on TCH/H channel. If the counter’s value is
too large, it indicates poor UL level on TCH/H channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to UL strength, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060225
Definition Number of TCH/H handover attempts due to DL strength
C900060226
Definition Number of TCH/H handover attempts due to UL quality
Description This counter counts the number of handover attempts due to UL
quality too poor on TCH/H channel.
Usage This counter is used to find out the frequency of handover due to
UL quality on TCH/H channel. If the counter’s value is too large,
it indicates poor UL quality on TCH/H channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to UL quality, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060227
Definition Number of TCH/H handover attempts due to DL quality
Description This counter counts the number of handover attempts due to DL
quality too poor on TCH/H channel.
Usage This counter is used to find out the frequency of handover due to
DL quality on TCH/H channel. If the counter’s value is too large,
it indicates poor DL quality on TCH/H channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to DL quality, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060228
Definition Number of TCH/H handover attempts due to UL interference
C900060229
Definition Number of TCH/H handover attempts due to DL interference
Description This counter counts the number of handover attempts due to DL
interference too large on TCH/H channel.
Usage This counter is used to find out the frequency of handover due to
DL interference on TCH/H channel. If the counter’s value is too
large, it indicates large DL interference on TCH/H channel.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to DL interference, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060230
Definition Number of TCH/H handover attempts due to good C/I
Description This counter counts the number of MS handover attempts due to
too large C/I ratio on TCH/H channel. The handover only occurs
during sub-cell configuration and when C/I algorithm is adopted;
MS performs handover from external circle to internal circle.
Usage This counter is used to find out the frequency of MS handover
due to too large C/I ratio on TCH/H channel. If the counter’s
value is too large, it indicates that, after MS accesses the
external circle, MS performs handover to the internal circle many
times due to good C/I ratio and the internal circle absorbs the
traffic.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to too large C/I ratio, this counter increments.
The measurement point is A, as shown in Figure 124.
Unit Times
C900060231
Definition Number of TCH/H handover attempts due to bad C/I
Description This counter counts the number of MS handover attempts due to
too low C/I ratio on TCH/H channel. The handover only occurs
during sub-cell configuration and when C/I algorithm is adopted;
MS performs handover from internal circle to external circle.
Usage This counter is used to find out the frequency of MS handover
due to too low C/I ratio on TCH/H channel. If the counter’s value
is too large, it indicates that, when MS calls within the internal
circle, MS performs handover to the external circle many times
due to poor C/I ratio. Interference within the internal circle is big,
and C/I ratio of the internal circle can be improved by adjusting
the carrier power.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to too low C/I ratio, this counter increments.
The measurement point is A, as shown in Figure 124.
Unit Times
C900060232
Definition Number of TCH/H handover attempts due to PBGT
Description This counter counts the number of MS handover attempts due to
PBGT value on TCH/H channel. If PBGT value is larger than zero,
it indicates the adjacent cell has better radio environment than
the current cell. If the number of times that PBGT value is larger
than zero reaches the threshold, PBGT handover occurs.
Usage This counter is used to find out the frequency of MS handover
due to PBGT value on TCH/H channel. If the counter’s value is
too large, it indicates that signal on TCH/H channel within the
current cell is poorer than that in the adjacent cell.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to PBGT value, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060233
Definition Number of TCH/H handover attempts due to large TA
Description This counter counts the number of MS handover attempts due to
too large TA on TCH/H channel. Increasing TA indicates that MS
is moving away from the current cell. When the distance reaches
a certain value, handover will occur due to too large TA.
Usage This counter is used to find out the frequency of MS handover
due to too large TA on TCH/F channel. The counter’s value
reflects the mobility of subscribers in the current cell to a certain
extent.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to too large TA, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060234
Definition Number of TCH/H handover attempts due to other reasons
Description This counter counts the number of handover attempts due to
any other reason beyond the handover reasons mentioned
previously.
Usage This counter is used to find out the frequency of handover due to
any other reason.
Measurement BSC performs handover decision after receiving measurement
Point report on TCH/H channel. If handover decision succeeds and the
handover is due to any other reason beyond the handover
reasons mentioned previously, this counter increments. The
measurement point is A, as shown in Figure 124.
Unit Times
C900060235
Definition Number of signaling TCH/H assignment success
Description This counter counts the number of successfully assigning TCH/H
channel as signaling channel.
After BSC responds the channel request and successfully
allocates and occupies the channel, BSC sends channel
activation message CHL_ACT to activate the TCH/H. For
immediate assignment, after the channel activation succeeds,
BTS receives the MS access message and sends EST_IND to BSC.
The counter increments when BSC receives the message
correctly.
Measurement For immediate assignment, the counter increments when BSC
Point receives the EST_IND message correctly. The measurement
point is A3, as shown in Figure 103.
Unit Times
C900060236
Definition Number of MOC access success
Description This counter counts the number of Mobile Originated Call (MOC)
MS successfully accesses the channel allocated in the immediate
assignment message. When MS receives IMM_ASS issued by
BSC, MS accesses the corresponding channel successfully. The
counter increments when BSC receives the EST_IND message
from MS.
Usage This counter is used to find out the frequency of successful MS
access due to MOC.
Measurement The counter increments when BSC receives the EST_IND
Point message. The measurement point is A4, as shown in Figure 99.
Unit Times
C900060237
Definition Number of dual band outgoing handover
Description This counter counts the number of MSC-controlled inter-BSC
outgoing handovers that are initiated by MS in the source cell
(the source cell and the target cell are of different frequency
bands).
Usage This counter is used to find out the frequency of MSC-controlled
inter-BSC outgoing handover that is initiated by MS. The source
cell and the target cell are of different frequency bands.
Measurement BSC performs handover decision after receiving the
Point measurement report sent by MS. If the decision indicates that
inter-cell handover is necessary and if the current cell to which
the handover is attempted is a cell under different BSC, then
BSC sends the handover request A_HO_RQD to MSC to trigger
inter-BSC handover. If BSC receives the handover command
returned from MSC and if the source cell and the target cell are
of different frequency bands, then this counter increments. The
measurement point is A, as shown in Figure 127.
Unit Times
C900060238
Definition Number of dual band outgoing handover success
Description This counter counts the number of successful MSC-controlled
inter-BSC outgoing handovers that are initiated by MS in the
source cell (the source cell and the target cell are of different
frequency bands).
Usage This counter is used to find out the frequency of successful MSC-
controlled inter-BSC outgoing handover that is initiated by MS.
The source cell and the target cell are of different frequency
bands.
Measurement BSC performs handover decision after receiving the
Point measurement report sent by MS. If the decision indicates that
inter-cell handover is necessary and if the current cell to which
the handover is attempted is a cell under different BSC, then
BSC sends the handover request A_HO_RQD to MSC to trigger
inter-BSC handover. If MS accesses the target cell successfully,
the source cell receives the release command issued by MSC, if
the source cell and the target cell are of different frequency
bands, then this counter increments. The measurement point is
A, as shown in Figure 128.
Unit Times
C900060239
Definition Number of dual band incoming handover
Description This counter counts the number of inter-BSC incoming
handovers to the current cell that are initiated by MSC (the
source cell and the target cell are of different frequency bands).
Usage This counter is used to find out the frequency of inter-BSC
incoming handover that is initiated by MSC. The source cell and
the target cell are of different frequency bands.
Measurement After the target cell receives the handover request issued by
Point MSC, if the target cell occupies and activates the channel
successfully and if the source cell and the target cell are of
different frequency bands, then this counter increments. The
measurement point is A, as shown in Figure 131.
Unit Times
C900060240
Definition Number of dual band incoming handover success
Description This counter counts the number of successful MSC-controlled
inter-BSC incoming handovers that are initiated by MS (the
source cell and the target cell are of different frequency bands).
Usage This counter is used to find out the frequency of MSC-controlled
inter-cell handover that is initiated by MS. The source cell and
the target cell are of different frequency bands.
Measurement After the target cell receives the handover completion message,
Point if the request is due to MSC-controlled inter-BSC incoming
handover and if the source cell and the target cell are of
C900060241
Definition Number of SDCCH assignment attempts
Description After BSC responds to the channel request to allocate and
activate SDCCH channel successfully, BSC sends the IMM_ASS
message to notify MS to use this channel. After MS receives this
message, it sends SABM frame to BTS on SDCCH. BTS then
sends the EST_IND message to BSC after receiving SABM frame.
If BSC receives the correct EST_IND message within
specified time, it indicates that the SDCCH channel
assignment succeeds, C900060241 and C900060242
accumulate simultaneously.
If BSC receives the incorrect EST_IND message or T3101 is
timeout, it indicates that the SDCCH channel assignment fails,
C900060241 and C900060243 accumulate simultaneously.
Usage This counter counts the number of SDCCH channel assignment
attempts when BSC sends the IMM_ASS message to notify MS to
use the allocated SDCCH channel. The counter’s value includes
the number of assignment success (C900060242) and the
number of assignment failure (C900060243).
Measurement This counter counts when BSC receives the EST_IND message or
Point the assignment completion message, or when T3101 is timeout
(C900060242 + C900060243). The measurement point is A3, as
shown in Figure 100.
Unit Times
C900060242
Definition Number of SDCCH assignments success
Measurement This counter counts when BSC receives the correct EST_IND
Point message or the assignment completion message. The
measurement point is A3, as shown in Figure 100.
Unit Times
C900060243
Definition Number of SDCCH assignment failure
Description After BSC responds to the channel request to allocate and
activate SDCCH channel successfully, BSC sends the IMM_ASS
message to notify MS to use this channel. After MS receives this
message, it sends SABM frame to BTS on SDCCH. BTS then
sends the EST_IND message to BSC after receiving SABM frame.
If BSC receives the incorrect EST_IND message or T3101 is
timeout, it indicates that the SDCCH channel assignment fails,
then this counter increments.
Usage This counter counts the number of MS failing to access SDCCH
channel when BSC sends the IMM_ASS message.
Measurement This counter counts when BSC receives the incorrect EST_IND
Point message or when T3101 is timeout. The measurement point is
A3, as shown in Figure 100.
Unit Times
C900060244
Definition Number of voice TCH/F drops due to radio link failure
Description This counter counts the number of voice TCH/F drops due to
radio link failure. After MS applies for TCH/F voice channel, call
drops. If this problem is caused by radio link failure, then this
counter increments.
Usage This counter is used to learn the call drop frequency caused by
raio link failure on TCH/F voice.
Measurement On TCH/F voice channel, when BSC receives Connection Failure
Point Indication message at Abis interface, this counter counts. The
measurement point is A, as shown in Figure 146.
Unit Times
C900060245
Definition Number of voice TCH/H drops due to radio link failure
Description This counter counts the number of voice TCH/H drops due to
radio link failure. After MS applies for TCH/H voice channel, call
drops. If this problem is caused by radio link failure, then this
counter increments.
Usage This counter is used to learn the call drop frequency caused by
raio link failure on TCH/H voice.
Measurement On TCH/H voice channel, when BSC receives Connection Failure
Point Indication message at Abis interface, this counter counts. The
measurement point is A, as shown in Figure 146.
Unit Times
Abbreviations
Figures