Beruflich Dokumente
Kultur Dokumente
Data:
Radius of water tank =5.0m
Height of tank=2.0m
Thickness of side wall of tank =150mm
Height of Tank from GL =8.0m
Beam size = 250 x 250 mm
Column Dia =600mm
No. of supporting column= 18
Concrete grade M30
Steel Fe 415 grade
Tank model:
Isometric view Delete the dia of circle (beam) created Ok. Click Add beam icon
Connect nodes on one end of circle to the node created Select the beam
Right click Insert node n=5Ok. Copy the slanting beam
Geometry 3D Circular Repeat Axis of Rotation Y Total angle =360º
No. of steps = 18 Check □ Link steps Check □ open base Ok.
Fig. 19 Selecting all circular top side wall of tank for hydrostatic pressure
Fig. 20 Isometric view of selected side wall of tank
W1= 20 KN/m2 W2= 0.001 Y
Local Z Add Close.
Local Z GY Add. High light W=-20 and Select Bottom portion of tank using
Highlight slab elements design and select the top portion of side wall of
From Main Menu Commands Run Analysis Go to post processing mode
Done.
8. Results: