Beruflich Dokumente
Kultur Dokumente
United Kingdom
Weidmuller Ltd.
1 Abbey Wood Road
Kings Hill
West Malling
Kent ME19 4YT
Phone +44 1732 877000
Fax +44 1732 873873
info@weidmuller.co.uk
www.weidmueller.com
• Lip on the upstand increases gasket • A high temperature silicon gasket • An integrated locking clasp is fitted as
contact and improves the seal surface offered as standard (–60 °C to standard allowing a padlock to be fitted
area, thus ensuring a high IP66/67 +140 °C) for enhanced onsite security
protection rating of the enclosure • Gasket compression is controlled • Padlocks are available as an optional
• Provides an effective drainage path accessory
without relying on the seal to perform
this function
2
Klippon® TB – Stainless Steel Enclosures
Dimensions (Front view) (Front view – door removed) 150 Deep 200 Deep
(View on right hand side and on bottom) (View on right hand side and on bottom)
Height x Width x Depth mm 150 Deep = 260 x 260 x 150 200 Deep = 260 x 260 x 200
Weight g 150 Deep = 1GP-5.25kg, 2GP-6.0kg, 3GP-6.25kg, 4GP-7.0kg
200 Deep = 1GP-6.0kg, 2GP-7.0kg, 3GP-7.5kg, 4GP-8.25kg
Technical data
Enlosure Material: Stainless Steel 1.4404(316L) 1.50mm ATEX Certification: Baseefa 06ATEX0010U (Component)
Gland Plate Material: Stainless Steel 1.4404(316L) 3.00mm* ATEX Certification: Baseefa 06ATEX0011X EEx E, EEx ia and EEx [ia]***
Ingress Protection: IP66 & IP67 ATEX Marking: TII 2GD Ex e II Ex tD A21
Earthing: Body-Internal/External M10 Brass / Door - M6 x 25 S/Steel IEC Certification: IECEx BAS 06.0004X (assembled) IECEx BAS 06.0003U (component)
Internal Mounting: 4 Mounting Pillars with M6 threaded hole IEC Marking: Exe II Ex tD A21 IP66 & IP67
External Mounting: 4 External lugs with 11mm slots- see note a foot of page Pending Certification: UL,CSA, NEMA, GOST K and R
Lid Opening: Fully detachable lid(Self Retaining)with 2 x M5 A4 Hex Head Bolts Gasket Material: Silicon –60 °C to +140 °C
Impact Resistance: 10 J Gasket compression control in accordance with manufacturers recommendation
M 40 3 2 6 4
Notes
M 50 2 2 2 2 For 1GP and 2 GP versions subtract 30 mm
M 63 0 0 2 1 from horizontal fixing centre dimensions