Beruflich Dokumente
Kultur Dokumente
TECHNOLOGY,BANUR
ASSIGNMENT
Short Questions
1. Explain the difference between the subject of ‘Heat transfer’ and ‘Thermodynamics’.
2. On a hot summer day, a student turns his fan on when he leaves his room in the morning. When he returns
in the evening, will his room be warmer or cooler than the neighbouring rooms? Why? Assume all the
doors and windows are kept closed.
3. Consider two identical rooms, one with a refrigerator in it and the other without one. If all the doors and
windows are closed, will the room that contains the refrigerator be cooler or warmer than the other room?
Why?
4. What are three modes of heat transfer, explain with suitable examples.
5. Define Fourier's law of heat conduction & equation governing this law.
6. Consider heat transfer through a windowless wall of a house in a winter day. Discuss the parameters that
affect the rate of heat conduction through the wall.
7. What is a temperature gradient? What are its units? What is the relationship of heat flow to a temperature
gradient?
8. Judging from its unit W/m · °C, can we define thermal conductivity of a material as the rate of heat transfer
through the material per unit thickness per unit temperature difference? Explain.
9. Consider heat loss through the two walls of a house on a winter night. The walls are identical, except that
one of them has a tightly fit glass window. Through which wall will the house lose more heat? Explain.
10. Which is a better heat conductor, diamond or silver?
11. Why the thermal conductivity of metals is higher than fluids?
12. What are the factors on which thermal conductivity of gases depend?
13. Define Thermal diffusivity and discuss its importance.
14. Discuss factors affecting thermal conductivity of a material.
15. Discuss log mean Area of cylinder used in heat transfer.
16. Explain why Eskimos make double walled houses of blocks of ice.
17. What will be your response to a person who states that heat cannot be transferred in a vacuum?
18. Define overall heat transfer coefficient.
19. Define conduction shape factor.
20. Define critical heat flux.
21. What is thermal contact resistance? How is it related to thermal contact conductance?
22. Will the thermal contact resistance be greater for smooth or rough plain surfaces?
23. Consider a cold canned drink left on a dinner table. Would you model the heat transfer to the drink as one-,
two-, or three-dimensional? Would the heat transfer be steady or transient? Also, which coordinate system
would you use to analyze this heat transfer problem, and where would you place the origin? Explain.
24. Consider a round potato being baked in an oven. Would you model the heat transfer to the potato as one-,
two-, or three-dimensional? Would the heat transfer be steady or transient? Also, which coordinate system
would you use to solve this problem, and where would you place the origin? Explain.
25. What is Critical thickness of insulation?
26. An iron is left unattended and its base temperature rises as a result of resistance heating inside. When will
the rate of heat generation inside the iron be equal to the rate of heat loss from the iron?
27. Consider the uniform heating of a plate in an environment at a constant temperature. Is it possible for part
of the heat generated in the left half of the plate to leave the plate through the right surface? Explain.
28. List four applications, where fins are used.
29. Write the assumption in case of fins.
30. Define the efficiency of fin.
31. Define Effectiveness of fin. Why it is used in IC engines
32. What is time constant of the thermocouple. Write the expression.
33. What are the parameters on which the effectiveness of a fin depends?
34. Why aluminium is used as fin material?
35. Explain the boundary conditions of infinitely long fin. Write its mathematical expression.
36. Define Biot number & its physical significance.
37. What is thermometric well? Draw its diagram.
38. Hot water is to be cooled as it flows through the tubes exposed to atmospheric air. Fins are to be attached in
order to enhance heat transfer. Would you recommend attaching the fins inside or outside the tubes? Why?
39. Consider an insulated pipe exposed to the atmosphere. Will the critical radius of insulation be greater on
calm days or on windy days? Why?
40. Under what conditions does the fin efficiency become nearly 100%?
41. What do you mean by “CLADDING”? Name two clad materials.
42. Consider two cold canned drinks, one wrapped in a blanket and the other placed on a table in the same
room. Which drink will warm up faster?
43. Does the (a) efficiency and (b) effectiveness of a fin increase or decrease as the fin length is increased?
44. Why the need of Triangular and parabolic fins come in existence?
45. Is it necessary that adding insulation always reduces the heat transfer rate?
46. Define and distinguish between steady state and unsteady state heat transfer with examples.