Beruflich Dokumente
Kultur Dokumente
C 3 8 3 4 3 0 4 5 0 4 A
D A T E : A p r . 1 2 , ‘ 1 2
SPECIFICATIONS
ENGINE-DRIVEN AC GENERATOR
MODEL DCA-400ESEI
[50Hz、380V]
HEAD OFFICE
1.2 The generating set shall be designed, manufactured and tested in accordance
with the latest standards of ISO 8528.
Other matters which are not specifically mentioned in the above standards
shall be subject to Denyo Co., Ltd.'s production regulations.
2. GENERAL
2.2 Change
Minor changes after the final design may be made by Denyo Co., Ltd.
without prior notice to the purchaser. In case of major changes or
additional equipment which may result in an increase or decrease of
equipment's cost, modifications shall be made in writing and agreed to by
both parties prior to production and shall constitute an amendment to these
specifications.
- 1 -
3. STRUCTURE
4. SPECIFICATIONS
4.1 AC Generator
- NOTE -
- 2 -
4.2 Diesel Engine
- NOTE -
- 3 -
4.6 Dielectric Strength Test
The strength of the windings of the generator and control box shall
meet the specifications of the high voltage test according to IEC 34-1
standards:
4.8 Dimension
Length : approx. 4620 mm
Width : approx. 1450 mm
Height : approx. 2200 mm
4.9 Weight
Dry weight : approx. 5460 kg
Total weight : approx. 6020 kg
- 4 -
5. INSTRUMENT PANEL AND SYSTEM
- 5 -
5.4 Safety Controls
The generating set shall be equipped with automatic safety controls
which will shut down the engine in the event of any abnormal condition,
such as :
Emergency stop
○ - -
button
Low lubricating
○ - ○
oil pressure
High jacket water
○ - ○
temp.
Over current of
- ○ -
generator
Earth leakage - ○ ○
Over speed ○ - ○
Air element
- - ○
blinding
Mark ○: Operate Mark -: Not operate
6. CAPACITY
7. ATTACHMENT
8. COATING
The color of the generator proper and the engine shall be the manufacturer's
standard colors, and that of the bonnet shall be RAL7011, RAL7045, and N-1.
- 6 -