Beruflich Dokumente
Kultur Dokumente
FE 2507- SINE
FOR VILEDON DUST REMOVAL ELEMENTS
Freudenberg – the origin of filter media bossed spunbonded nonwovens. An ingly stringent dust emission guide-
Pleatable polyester filter medium with advantage with beneficial effects on lines. This is particularly true when
sinusoidal cross-section and microfi- the cleaning behavior. it comes to arresting particles of
bers sets new standards for the per- • Profit from extended lifetimes and < 2.5 μm, since the fiber structure
formance of pleated dust removal ele- reduced maintenance costs. The is significantly more homogeneous
ments. patented pleat stabilization concept than spunbonded nonwovens.
is thermally stable up to 90 °C, and • In the shape of filter medium FE
Lots of pluses for you with “sine”! remains stable even under alternat- 2506 - sine we have an antistatic vari-
• Savings of up to 35 % of energy costs ing loads of filtration and cleaning ant with pleat corrugation for which
are possible during operation. The phases. a DEKRA test report is on file.
pleat corrugation significantly down- • Increase the air throughput of your
sizes the pressure drop by prevention filters, since cartridges fitted with FE
of a pleat collapse during opera- 2507- sine offer a larger effective filter
tion. Thanks to its full-area thermal area.
bonding the material exhibits a sig- • Measurements of fractional collec-
nificantly smoother and more homo- tion efficiencies prove: FE 2507- sine
geneous surface than linearly em- meets the requirements of increas-
Air-permeability at 200 Pa m /m /h
3 2
300
FREUDENBERG
FILTRATION TECHNOLOGIES
02-EC-223-August-2015-EN
TECHNICAL FILTER TEST DATA FOR FE 2507- SINE
100
Test dust: limestone, x50= 1 μm
90
Fractional efficiency T (x) [%]
80
70 The pleat design explains the outstand-
ing pressure drop characteristics of the
60 FE 2507- sine type compared to other
50 dust removal media.
40
30
20
10
0
0.1 1 2.5 10
Replaces all previous issues of this data sheet. Viledon® is a registered and protected trademark of Carl Freudenberg KG.
2,000
1,800 Pleats without
drainage
Residual pressure drop [Pa]
1,600 nonwoven
1,400
1,200
1,000
800
600 Pleat support
with drainage
400 nonwoven
200
0
0 10 20 30 40 50 60 70 80 90 100
Cycle
Corrugated mate-
rial with integrated
artridge with polyester
C artridge with poly-
C C
artridge with spacers
spunbonded nonwoven ester nonwoven and corrugated polyester
without drainage nonwoven drainage nonwoven nonwoven
The figures given are mean values subject to tolerances due to normal production fluctuations. Our explicit written confirmation is always required for the correct-
ness and applicability of the information involved in any particular case. Subject to technical alterations.