Beruflich Dokumente
Kultur Dokumente
AND DEVELOPER
OF MEASUREMENT
AND SENSOR TECHNOLOGY
PRODUCT
CATALOGUE
OEM
FLOW
METERS
INDUCTION
FLOW
METERS
FLOW
SWITCHES
BATCH
FLOW
METERS
COMAC CAL s.r.o.
has been engaged in development and production of both inductive
flow meters and flowswitches since its establishment. For the period
of its long-time existence, the company has developed and launched
into the market solutions to the most diverse problems, beginning
from a simple cheap flow meter to complex smart batch systems
with noise suppression devices In order to meet the demands of our
customers as much as possible, we have established an authorized
metrology and calibration centre. In this way, we are able to help
the customer with solving the most diverse problems, including
consultations and checking the correctness of measurements.
The company has extended its offer with meters equipped with oval
gears made by Macnaught Pty Ltd and sensor technology with pres-
sure gauges and level meters, including combined sensors
along with temperature measurement devices by STS Sensor Technik
Sirnach AG. Both of them are multinational companies that are leade-
rs in their branch and are able to solve all sorts of problems in sectors
of industry, including necessary certificates. For the 20-year period
of company‘s history and thanks to our own development centre,
we have been able to offer the customer solutions made to order
so that it can fully suit to his requirements and in all sorts of branches
of industry. Our principal goal is the satisfaction of the customer and
we follow this slogan in everything we do.
INDUCTIVE FLOW METER
FLOW 38
Power 230 VAC (50/60 Hz), 24 VAC/VDC with polarity reversal protection
FLOW 33
FLOW 33 Ex ia
FLOW 45
FLOW 38 BATCH
Integration of
induction flow meter
in stainless steel design
It is an integration of induction flow meter in stainless
steel design, due to which the meter is highly durable
also in harsh environment. The electronic unit is
connected with a control board for a system of relays
so that they can control individual actuators in the
system. The robust structure of the electronic unit
allows the operator to handle it with gloves on. Also,
complete control, including setting the size of an
individual batch, starting and possibly its stopping
with following resetting or continuation of the batch
initiated. This is provided by means of intuitive and
simple access to control elements of the unit and by
well-arranged display with all information available
to operator. The entire unit is built on the existing
FLOW 38 meter and the user is provided with access
to the menu of the standard flow meter, including all
of the individual counters. The unit is equipped with
doubled relay switches (with 250V, 10A rating) cont-
rolled by a higher-ranking FLOW 38 unit depending
on the progress of the batch.
FLOW 32
Power 15÷24V DC
Input power 3 VA (without bargraf)
MAIN MERITS Diameter Nominal DN 6÷40
20 μS (at a lower conductivity, upon agreement
Measured fluid min. conductivity
with the manufacturer)
Flow meter accuracy up to 1 %, repeatability up to 0.5 %
• Tailor-made production Sampling 6,25 samples / second
Outputs pulses, PWM, 4–20 mA current loop
• Low size of the flow meter – the electronic unit Flow sensor degree of protection IP65, IP67
in the flow meter body
• Possible signalling using a LED light bar
• High variability of process connection
• Variable flow pulse number
FLOW SWITCH
Flow switch
it is a device that monitors the flow of fluid
based on calorimetry principle. If the flow rate
drops below a limit set by user, the status output
is changed. The flow rate is displayed by ten LEDs
and it is possible to select a boundary for contact
making/breaking in the same graduation.
AMS K87
SERVICES PROVIDED
COMAC CAL s.r.o.
Since 2001 has been authorized according
to Act No. 505/1990 Coll. on metrology, • Initial and subsequent verification of water meters for hot and cold water
as amended by the Act No. 119/2000 Coll.
by the Office for Technical Normalization, • Initial and subsequent verification of heat meters, cold meters and their elements
Metrology and State Testing, to verify the • Provision of verification of Pt 100, Pt 500, Pt 1000 resistance thermometer elements
meters for water flow quantity, heat/cold
meters and their elements. • Verification of meters during the validity of calibration verification of specified
meters and special flow meters, including adjustment
We provide complex security in the sphere
of verification, calibration, repairs, warranty • Refurbishment of flow meters and heat meters
and after-warranty service for water meters, • Possibility of assembly and disassembly of meters at customer site,
flow meters, and heat/cold meters. This may
including transport
represent e.g. the complete process from
removal of the meter at customer, transport • Fast repairs and verification within 24 hours
to the centre, execution of cleaning, con-
• Hiring of measuring equipment, including operator
tingent repairs (refurbishment), adjusting,
verification (calibration), transport back • Measurement hardware sales, servicing and after-warranty service
and re-mounting.
COMAC Flow Station measuring range 0.13 m3/h to 170 m3/h (DN15 to DN 100)
Main etalon Electronic weighing-machine MVD 2630A, HBM Grossen
Volumetric with running start
Measurement method
Gravimetric with dead start
Temperature of medium Up to 30°C
COMAC 2 Flow Station measuring range 0.006 m3/h to 45 m3/h (DN6 to DN 50)
Main etalon Electronic weighing-machine KCC300-ID1,
METTLER TOLEDO
Volumetric with running start
Measurement method
Gravimetric with dead start
Temperature of medium Up to 70 °C
CZECH PRODUCER
AND DEVELOPER
OF MEASUREMENT
AND SENSOR TECHNOLOGY