Sie sind auf Seite 1von 597

BSC6910 GU

V100R016C00
Parameter List
Issue 06

Date 2014/12/30

HUAWEI TECHNOLOGIES CO., LTD.


Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei T

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective h

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part
features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the c
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any

The information in this document is subject to change without notice. Every effort has been made in the preparation of this docum
contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express

Huawei Technologies Co., Ltd.


Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
ved.

y any means without prior written consent of Huawei Technologies Co., Ltd.

Co., Ltd.

in this document are the property of their respective holders.

t made between Huawei and the customer. All or part of the products, services and
r the usage scope. Unless otherwise specified in the contract, all statements,
hout warranties, guarantees or representations of any kind, either express or implied.

effort has been made in the preparation of this document to ensure accuracy of the
ment do not constitute a warranty of any kind, express or implied.
Purpose
This document describes the MO parameters of BSC6910. For the details about the parameters re
northbound interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC
V100R016 Parameter List.

Intended Audience
This document is intended for:
● Network planners
● System engineers
● Field engineers
● Shift operators
●Site maintainers
●Network operators

Structure
The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
Parameter Name
NE
MML Command

Meaning

IsKey
Mandatory

Feature ID

Feature Name

Value Type

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 5
Copyright © Huawei Technologies Co., Ltd
GUI Value Range

Enumeration Number/Bit

Unit
Actual Value Range

Default Value

Recommended Value

Initial Value Source

Impact

Parameter Relationship

Access

Service Interrupted After Modification

Interruption Scope
Interruption Duration (min)
Caution

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 6
Copyright © Huawei Technologies Co., Ltd
Validation of Modification

Impact on Radio Network Performance


Introduced in Version…
Attribute

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 7
Copyright © Huawei Technologies Co., Ltd
ument describes the MO parameters of BSC6910. For the details about the parameters related to
und interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC6910 UMTS
16 Parameter List.

cument is intended for:


twork planners
stem engineers
ld engineers
ft operators
maintainers
work operators

ributes of each parameter.


Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NEs on which the parameter is set.
Man Machine Language (MML) command related to the parameter.

Function of a parameter, protocol that defines the parameter, whether the parameter is out of use in later versions, an
whether the parameter is an advanced parameter.
If the parameter will be out of use, a related description beginning with "Disuse statement" will be provided in the para
meaning.
Advanced parameters are not configured through northbound interfaces. To modify these parameters, contact Huawe
Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve optimal network perform
These parameters will have fixed values and will be deleted after the beta test or test at the customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal network performance, m
parameters must be modified because modification of a single parameter has little effect on the network and even ma
cause accidents, for example, service interruption.

Whether the parameter is used to identify an MO instance.


Whether the parameter is mandatory for creating an MO instance.

ID of the feature that uses the parameter.


Note: Some common parameters and parameters introduced for internal functions do not have corresponding feature

Name of the feature that uses the parameter.

Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type, Interval Type, Bit Fie
Type, Character String Type, Wildcard Mask Type, Subnet Mask Type, Password Type, Any Type, BCD Number Type

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 8
Copyright © Huawei Technologies Co., Ltd
Range of the parameter values displayed on the GUI.
The value of a string parameter cannot contain the following characters:
<>!?\/:;,=+%*"'|
Two or more percent signs (%) or spaces, +++ (start character of an MML message), or --- END (end character of a
message)
NULL or <NULL>, which indicates that an attribute of an MML message is null
Spaces at both ends
Note: The value of the Directory, File Name, and URL parameters can contain a backslash (\) or slash (/).
The value of anumber
Enumeration password parameter to
corresponding cannot contain
the GUI valuethe
of afollowing characters:
parameter of the enumeration type, or bit position correspo
Symbols ; , = " '
to the GUI value of a parameter of the bit field type. N/A is filled if the parameter value is not enumeration type or bit f
Key
type.characters: two or more % symbols or spaces, +++ (start character of an MML message), or --- END (end char
an MML
Note: Formessage)
a parameter of the bit field type, bit position lists only the bits in use. Bits not in use are set to 0 and not des
in this document.

Unit of a parameter value displayed on the GUI.


Range of the actual values corresponding to the parameter values displayed on the GUI.

Initial value assigned by the system for a parameter. For a mandatory parameter, no default value is available. For a b
parameter, if the value of a sub-parameter is ON, the bit representing the sub-parameter is set to 1; if the value of a s
parameter is OFF, the bit representing the sub-parameter is set to 0. None indicates that no default value is available
Generally, it is displayed on the configuration window of an ADD command but not displayed on the configuration win
a MOD/RMV/DSP/LST/SET command.

Source
Parameterfor the initial
values configurationfor
recommended of a parameter.
different The initial value source can be:
scenarios.
Radio planning (Internal planning): The parameter value comes from the radio network plan, facilitating resource
management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network plan. The NE nego
this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network plan, facilitating res
management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport network plan. The
negotiates this value with the peer device to ensure successful interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value, where the recommend
value is preferential. The default/recommended value can be used in most scenarios and adjusted for a specific scen
Parameter
N/A: impact scope.
The parameter value is not required.
Relationship with other parameters. For example, to use this parameter, you need to set related switches and parame

Whether a parameter has one of the following properties:


Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.

Whether the parameter modification interrupts the ongoing services. One of the following comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing services, and has no
on the network access of UEs in idle mode.
No (Impact on the UE in idle mode): The modification does not interrupt the ongoing services, but affects the netwo
access of UEs in idle mode.
N/A: This comment is used when a parameter cannot be modified.

Possible interruption scope.


Possible interruption duration (unit: minute).
Cautions to be taken during the modification.

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 9
Copyright © Huawei Technologies Co., Ltd
How this parameter takes effect and whether the equipment needs to be restarted after the modification. The parame
modification does not impact the equipment means that the parameter takes effect immediately after the modification

Impact of the parameter on radio network performance.


Product version in which the parameter is introduced.
Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 10
Copyright © Huawei Technologies Co., Ltd
e parameter is out of use in later versions, and

Disuse statement" will be provided in the parameter

. To modify these parameters, contact Huawei

dvanced parameters:
ed feature to achieve optimal network performance.
ta test or test at the customized site.
PIs or performance.
s. To achieve optimal network performance, multiple
er has little effect on the network and even may

al functions do not have corresponding features.

Type, Enumeration Type, Interval Type, Bit Field


Password Type, Any Type, BCD Number Type.

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 11
Copyright © Huawei Technologies Co., Ltd
:

ML message), or --- END (end character of an MML

is null

ontain a backslash (\) or slash (/).


cters:
the enumeration type, or bit position corresponding
rameter value is not enumeration type or bit field
of an MML message), or --- END (end character of
n use. Bits not in use are set to 0 and not described

ayed on the GUI.

arameter, no default value is available. For a bit field


e sub-parameter is set to 1; if the value of a sub-
one indicates that no default value is available.
and but not displayed on the configuration window of

e can be:
the radio network plan, facilitating resource

mes from the radio network plan. The NE negotiates

rom the transport network plan, facilitating resource

comes from the transport network plan. The NE


king.
plan.
function design.
recommended value, where the recommended
ost scenarios and adjusted for a specific scenario.

you need to set related switches and parameters.

e of the following comments is provided:

ot interrupt the ongoing services, and has no impact

pt the ongoing services, but affects the network

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 12
Copyright © Huawei Technologies Co., Ltd
e restarted after the modification. The parameter
akes effect immediately after the modification.

n equipment parameter.

Huawei Proprietary and Confidential


Issue 01 (06/12/2015) 13
Copyright © Huawei Technologies Co., Ltd
273357673.xlsx 文档密级:

MO Parameter ID Parameter Name NE MML Command Meaning

Period during
which the
conditions for
handovers to
a better cell
are met.
According to
the P/N rule,
handovers to
a better cell
can be
BETTERCELLLAS Better Cell HO Valid ADD G2GNCELL triggered
G2GNCELL BSC6910
TTIME Time MOD G2GNCELL when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.

06/12/2015 华为机密,未经许可不得扩散 第14页,共597页


273357673.xlsx 文档密级:

Period during
which
handovers to
a better cell
are
measured.
According to
the P/N rule,
handovers to
a better cell
can be
BETTERCELLSTA Better Cell HO Watch ADD G2GNCELL triggered
G2GNCELL BSC6910
TTIME Time MOD G2GNCELL when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.

06/12/2015 华为机密,未经许可不得扩散 第15页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
ADD G2GNCELL of N
G2GNCELL BQLASTTIME BQ HO Valid Time BSC6910
MOD G2GNCELL measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
ADD G2GNCELL of N
G2GNCELL BQSTATTIME BQ HO Watch Time BSC6910
MOD G2GNCELL measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

06/12/2015 华为机密,未经许可不得扩散 第16页,共597页


273357673.xlsx 文档密级:

handover
algorithm II,
this
parameter is
used to
calculate the
hysteresis of
handovers
due to
directed retry
using the
following
formula:
Hysteresis of
handovers
due to
directed retry
Directed Retry = Value of
DRHOLEVRANG ADD G2GNCELL
G2GNCELL Handover Level BSC6910 "INTERCELL
E MOD G2GNCELL
Range HYST" -
Value of this
parameter.
Handovers
due to
directed retry
to a
neighboring
cell can be
triggered
when the
following
condition is
met:
(Downlink
receive level
of the
neighboring

06/12/2015 华为机密,未经许可不得扩散 第17页,共597页


273357673.xlsx 文档密级:

neighboring
cell can be
triggered
when either
of the
following
condition is
met:
Uplink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"ULEDGETH
RES" + Value
of this
EDOUTHOOFFSE Enhanced Outgoing ADD G2GNCELL
G2GNCELL BSC6910 parameter -
T Cell Handover Offset MOD G2GNCELL
64
Downlink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"DLEDGETH
RES" + Value
of this
parameter -
64
In the case of
Huawei
handover
algorithm II,
handovers to

06/12/2015 华为机密,未经许可不得扩散 第18页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
ADD G2GNCELL
G2GNCELL HCSLASTTIME HCS HO Valid Time BSC6910 are met in P
MOD G2GNCELL
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

06/12/2015 华为机密,未经许可不得扩散 第19页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
ADD G2GNCELL
G2GNCELL HCSSTATTIME HCS HO Watch Time BSC6910 are met in P
MOD G2GNCELL
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

06/12/2015 华为机密,未经许可不得扩散 第20页,共597页


273357673.xlsx 文档密级:

Hysteresis
value during
the
handovers
between
cells, This
value is used
to suppress
Inter-cell HO ADD G2GNCELL ping-pong
G2GNCELL INTERCELLHYST BSC6910
Hysteresis MOD G2GNCELL handovers
between
cells. The
actual value
of this
parameter is
equal to the
GUI value
minus 64.

06/12/2015 华为机密,未经许可不得扩散 第21页,共597页


273357673.xlsx 文档密级:

Whether to
apply penalty
on a
neighboring
cell when the
PBGT
handover,
concentric
cell
handover, or
hierarchical
handover in
Neighboring Cell ADD G2GNCELL handover
G2GNCELL NCELLPUNEN BSC6910
Penalty Switch MOD G2GNCELL algorithm I is
triggered, or
when the
better cell
handover in
handover
algorithm II is
triggered.
This prevents
a call from
experiencing
ping-pong
handovers.

06/12/2015 华为机密,未经许可不得扩散 第22页,共597页


273357673.xlsx 文档密级:

The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
ADD G2GNCELL
G2GNCELL TALASTTIME TA HO Valid Time BSC6910 t reports
MOD G2GNCELL
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to P in the
P/N criterion.

06/12/2015 华为机密,未经许可不得扩散 第23页,共597页


273357673.xlsx 文档密级:

The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
ADD G2GNCELL
G2GNCELL TASTATTIME TA HO Watch Time BSC6910 t reports
MOD G2GNCELL
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to N in the
P/N criterion.

06/12/2015 华为机密,未经许可不得扩散 第24页,共597页


273357673.xlsx 文档密级:

Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
ADD G2GNCELL
G2GNCELL ULBQLASTTIME UL BQ HO Last Time BSC6910 be triggered
MOD G2GNCELL
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.

06/12/2015 华为机密,未经许可不得扩散 第25页,共597页


273357673.xlsx 文档密级:

Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
ADD G2GNCELL
G2GNCELL ULBQSTATTIME UL BQ HO Static Time BSC6910 be triggered
MOD G2GNCELL
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.

06/12/2015 华为机密,未经许可不得扩散 第26页,共597页


273357673.xlsx 文档密级:

Whether to
convert
TCHHs to
TCHFs. If
this
parameter is
set to YES,
TCHHs are
converted to
TCHFs to
reduce
GCELLCHM HALFRATEREPA SET
TCHH Integration BSC6910 channel
GAD CKINGSWITCH GCELLCHMGAD
segments
and ensure
that idle
TCHFs are
sufficient. If
this
parameter is
set to NO,
TCHHs are
not converted
to TCHFs.

This
parameter is
a cell-level
parameter. If
the traffic
load in this
cell is lower
than the
GCELLHOA ACCTHRESLAYE Inter-Layer Load HO
BSC6910 SET GCELLHOAD threshold
D R Access Threshold
specified by
this
parameter,
the cell can
absorb traffic
from
neighboring
cells.

06/12/2015 华为机密,未经许可不得扩散 第27页,共597页


273357673.xlsx 文档密级:

intra-cell
handovers
reaches
"MAXCNTNU
M". If
"INTRACELL
SINUSEREN
" is set to
YES,
specified
MSs in a cell
are not
allowed to
initiate intra-
cell
handovers
due to quality
problems
GCELLHOA Forbidden time after within the
BANTIME BSC6910 SET GCELLHOAD
D MAX Times duration
specified by
this
parameter. If
"INTRACELL
SINUSEREN
" is set to
NO, all MSs
in the cell are
not allowed
to initiate
intra-cell
handovers.
For MSs that
use handover
algorithm I,
intra-cell
handovers
due to quality

06/12/2015 华为机密,未经许可不得扩散 第28页,共597页


273357673.xlsx 文档密级:

due to quality
problems
initiated by
an MS in a
cell at an
interval
specified by
this
parameter
are
consecutive.
If
"INTRACELL
SINUSEREN
" is set to
NO, the two
intra-cell
handovers
GCELLHOA Interval for
CONTINTV BSC6910 SET GCELLHOAD initiated by all
D Consecutive HO Jud.
MSs in the
cell at an
interval
specified by
this
parameter
are
consecutive.
When
handover
algorithm I is
used, this
parameter
specifies the
interval
between
intra-cell
handover

06/12/2015 华为机密,未经许可不得扩散 第29页,共597页


273357673.xlsx 文档密级:

The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
GCELLHOA INTERFEREDLEV DLevOffset for g level
BSC6910 SET GCELLHOAD
D OFF Interfere HO offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality
equals the
sum of the

06/12/2015 华为机密,未经许可不得扩散 第30页,共597页


273357673.xlsx 文档密级:

used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
and this
parameter
during the
GCELLHOA INTERFEREDLEV OL DL Level Offset for
BSC6910 SET GCELLHOAD interference
D OFFOL Interference HO
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
"INTERFERE
DLQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to

06/12/2015 华为机密,未经许可不得扩散 第31页,共597页


273357673.xlsx 文档密级:

When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
GCELLHOA INTERFEREDLQ OL DL Quality Offset and
BSC6910 SET GCELLHOAD
D UALOFFOL for Interference HO "INTERFERE
DLEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER

06/12/2015 华为机密,未经许可不得扩散 第32页,共597页


273357673.xlsx 文档密级:

quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
GCELLHOA INTERFEREDQU DQualOffset for
BSC6910 SET GCELLHOAD levels
D ALOFF Interfere HO
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.

06/12/2015 华为机密,未经许可不得扩散 第33页,共597页


273357673.xlsx 文档密级:

level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
GCELLHOA INTERFEREULEV ULevOffset for
BSC6910 SET GCELLHOAD correspondin
D OFF Interfere HO
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality

06/12/2015 华为机密,未经许可不得扩散 第34页,共597页


273357673.xlsx 文档密级:

When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
level and this
parameter
GCELLHOA INTERFEREULEV OL UL Level Offset for during the
BSC6910 SET GCELLHOAD
D OFFOL Interference HO interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
"INTERFERE
ULQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to
NO(No), the

06/12/2015 华为机密,未经许可不得扩散 第35页,共597页


273357673.xlsx 文档密级:

decision
conditions.
When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
GCELLHOA INTERFEREULQ OL UL Quality Offset receive level
BSC6910 SET GCELLHOAD
D UALOFFOL for Interference HO and
"INTERFERE
ULEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER

06/12/2015 华为机密,未经许可不得扩散 第36页,共597页


273357673.xlsx 文档密级:

threshold for
the receive
quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
GCELLHOA INTERFEREUQU UQualOffset for uplink and
BSC6910 SET GCELLHOAD
D ALOFF Interfere HO downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR

06/12/2015 华为机密,未经许可不得扩散 第37页,共597页


273357673.xlsx 文档密级:

parameter is
set to
YES(Yes),
the four
parameters
"INTERFERE
ULEVOFFOL
",
"INTERFERE
DLEVOFFOL
",
"INTERFERE
ULQUALOFF
OL", and
"INTERFERE
DLQUALOFF
OL" are used
for decisions
GCELLHOA INTERFEROFFS OL Offset for on handovers
BSC6910 SET GCELLHOAD
D WITCHOL Interference HO due to
interference
in overlaid
subcells. If
this
parameter is
set to
NO(No), the
four original
parameters
"INTERFERE
ULEVOFF",
"INTERFERE
DLEVOFF",
"INTERFERE
UQUALOFF",
and
"INTERFERE
DQUALOFF"

06/12/2015 华为机密,未经许可不得扩散 第38页,共597页


273357673.xlsx 文档密级:

Whether to
adjust cell
coverage
based on cell
load. If this
parameter is
set to
YES(Yes),
the handover
margin is
adjusted
GCELLHOA LOADHOHYSTAD Cell Edge Shrink
BSC6910 SET GCELLHOAD when the
D APEN Based on Load
load in the
serving cell is
high,
reducing the
coverage of
the serving
cell from the
aspects of
neighboring
cells at the
same layer.

06/12/2015 华为机密,未经许可不得扩散 第39页,共597页


273357673.xlsx 文档密级:

"Load HO
Threshold",
all calls in the
serving cell
initiate
handover
requests at
the same
time, which
will suddenly
increase the
load of the
CPU. When
the traffic
volume is
high,
congestion
occurs in the
GCELLHOA
LOADHOPERIOD Load HO Step Period BSC6910 SET GCELLHOAD cell, leading
D
to call drops.
To resolve
this problem,
the BSC
uses the
hierarchical
load
handover
algorithm to
control the
number of
MSs included
in each level
of handovers.
This
parameter
indicates the
duration of

06/12/2015 华为机密,未经许可不得扩散 第40页,共597页


273357673.xlsx 文档密级:

handovers
can be
performed
only when
the receive
level of the
current
serving cell is
in the range
"Edge HO DL
RX_LEV
Threshold" to
"Edge HO DL
RX_LEV
Threshold" +
"Load HO
Bandwidth".
In handover
GCELLHOA algorithm II,
LOADOFFSET Load HO Bandwidth BSC6910 SET GCELLHOAD
D load
handovers
can be
performed
only when
the level
difference
between the
neighboring
cell and the
serving cell is
between
("Inter-cell
HO
Hysteresis" -
64) - "Load
HO
Bandwidth"
and ("Inter-

06/12/2015 华为机密,未经许可不得扩散 第41页,共597页


273357673.xlsx 文档密级:

or equal to
the value of
this
parameter,
intra-cell
handovers
are not
allowed for
the MS within
the duration
specified by
"BANTIME".
If
"INTRACELL
SINUSEREN
" is set to
NO, when
the interval
GCELLHOA MAX Consecutive HO between two
MAXCNTNUM BSC6910 SET GCELLHOAD
D Times intra-cell
handovers
initiated by all
MSs in the
cell is less
than
"CONTINTV"
, the two
intra-cell
handovers
are
consecutive.
If the number
of
consecutive
intra-cell
handovers is
greater than
or equal to

06/12/2015 华为机密,未经许可不得扩散 第42页,共597页


273357673.xlsx 文档密级:

Triggering
threshold for
an inter-layer
load-based
handover.
When the
load in the
serving cell is
higher than
or equal to
the threshold
specified by
this
GCELLHOA TRIGTHRESLAYE Inter-Layer Load HO
BSC6910 SET GCELLHOAD parameter,
D R Start Threshold
an inter-layer
load-based
handover is
triggered. If
this
parameter is
set to 0, the
inter-layer
load-based
handover
algorithm
does not take
effect.

06/12/2015 华为机密,未经许可不得扩散 第43页,共597页


273357673.xlsx 文档密级:

during AMR
TCHF-to-
TCHH
handovers.
This
parameter
works with
"AMRFULLT
OHALFHOQ
UALTHRESH
". AMR
TCHF-to-
TCHH
handovers
can be
triggered
when both of
the following
GCELLHOB AMRF2HHOQUAL AMR F-H HO Quality SET
BSC6910 conditions
ASIC THFINE Thres. Fine Tune GCELLHOBASIC
are met:
Uplink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ
UALTHRESH
" + Value of
"AMRF2HHO
QUALTHFIN
E" x 0.1
Downlink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ

06/12/2015 华为机密,未经许可不得扩散 第44页,共597页


273357673.xlsx 文档密级:

Whether to
enable the
algorithm for
GCELLHOB AMRFULLTOHAL SET load- and
AMR F-H Ho Allowed BSC6910
ASIC FHOALLOW GCELLHOBASIC quality-based
AMR TCHF-
to-TCHH
handovers.

06/12/2015 华为机密,未经许可不得扩散 第45页,共597页


273357673.xlsx 文档密级:

With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
ATCB offset
by which to
choose the
AMRFULLTOHAL
GCELLHOB AMR F-H Ho ATCB SET MSs to
FHOATCBADJST BSC6910
ASIC Adjust Step GCELLHOBASIC undergo
EP
handover
from full rate
to half rate.
ATCB offset
= (duration
for triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
ATCB Adjust
Step"

06/12/2015 华为机密,未经许可不得扩散 第46页,共597页


273357673.xlsx 文档密级:

Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHF-to-
TCHH
handovers.
AMR TCHF-
to-TCHH
handovers
can be
triggered
when the
following
AMRFULLTOHAL condition is
GCELLHOB AMR F-H Ho ATCB SET
FHOATCBTHRES BSC6910 met:
ASIC Threshold GCELLHOBASIC
H ATCB of an
AMR full-rate
call >= Value
of this
parameter -
ATCB offset
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.

06/12/2015 华为机密,未经许可不得扩散 第47页,共597页


273357673.xlsx 文档密级:

With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
path loss
offset by
which to
choose the
AMRFULLTOHAL
GCELLHOB AMR F-H Ho Pathloss SET MSs to
FHOPATHADJST BSC6910
ASIC Adjust Step GCELLHOBASIC undergo
EP
handover
from full rate
to half rate.
Path loss
offset =
(duration for
triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
Pathloss
Adjust Step"

06/12/2015 华为机密,未经许可不得扩散 第48页,共597页


273357673.xlsx 文档密级:

Threshold for
the path loss
during AMR
TCHF-to-
TCHH
handovers.
AMR TCHF-
to-TCHH
handovers
can be
triggered
when the
following
condition is
met:
AMRFULLTOHAL
GCELLHOB AMR F-H Ho Pathloss SET Path loss of
FHOPATHTHRES BSC6910
ASIC Threshold GCELLHOBASIC an AMR full-
H
rate call <=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.

06/12/2015 华为机密,未经许可不得扩散 第49页,共597页


273357673.xlsx 文档密级:

Quality
threshold for
the AMR
handover
from full rate
to half rate. If
the uplink
and downlink
receive
quality levels
of an AMR
full rate call
AMRFULLTOHAL
GCELLHOB AMR F-H Ho Qual. SET are both
FHOQUALTHRES BSC6910
ASIC Threshold GCELLHOBASIC equal to or
H
less than
"AMRFULLT
OHALFHOQ
UALTHRESH
"+
"AMRF2HHO
QUALTHFIN
E"*0.1, the
AMR call is
handed over
from full rate
to half rate.

Threshold for
the load in a
cell during
AMR TCHF-
to-TCHH
handovers.
AMR TCHF-
GCELLHOB AMRFULLTOHAL AMR F-H Traffic SET
BSC6910 to-TCHH
ASIC FHOTHRESH Threshold GCELLHOBASIC
handover
decisions can
be made
when the cell
load is higher
than this
threshold.

06/12/2015 华为机密,未经许可不得扩散 第50页,共597页


273357673.xlsx 文档密级:

during AMR
TCHH-to-
TCHF
handovers.
This
parameter
works with
"AMRHALFT
OFULLHOQ
UALTHRESH
". AMR
TCHH-to-
TCHF
handovers
can be
triggered
when one of
the following
GCELLHOB AMRH2FHOQUAL AMR H-F HO Quality SET
BSC6910 conditions is
ASIC FINE Thres. Fine Tune GCELLHOBASIC
met:
Uplink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ
UALTHRESH
" + Value of
"AMRH2FHO
QUALFINEE"
x 0.1
Downlink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ

06/12/2015 华为机密,未经许可不得扩散 第51页,共597页


273357673.xlsx 文档密级:

Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHH-to-
TCHF
handovers.
AMR TCHH-
to-TCHF
handovers
can be
triggered
when the
AMRHALFTOFUL
GCELLHOB AMR H-F Ho ATCB SET ATCB of an
LHOATCBTHRES BSC6910
ASIC Threshold GCELLHOBASIC AMR half-
H
rate call is
less than or
equal to this
threshold.
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.

06/12/2015 华为机密,未经许可不得扩散 第52页,共597页


273357673.xlsx 文档密级:

Threshold for
the path loss
during AMR
TCHH-to-
TCHF
handovers.
AMR TCHH-
to-TCHF
handovers
can be
triggered
when the
following
condition is
met:
AMRHALFTOFUL
GCELLHOB AMR H-F Ho Pathloss SET Path loss of
LHOPATHTHRES BSC6910
ASIC Threshold GCELLHOBASIC an AMR half-
H
rate call >=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.

06/12/2015 华为机密,未经许可不得扩散 第53页,共597页


273357673.xlsx 文档密级:

Whether to
enable the
algorithm for
quality-based
AMR TCHH-
to-TCHF
handovers.
Even if the
cell load
does not
GCELLHOB AMRHALFTOFUL Allow AMR H-F SET
BSC6910 reach the
ASIC LHOQUALALLOW Quality-based HO GCELLHOBASIC
threshold,
TCHH-to-
TCHF
handover
decisions can
be made
when this
parameter is
set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第54页,共597页


273357673.xlsx 文档密级:

Quality
threshold for
the AMR
handover
from half rate
to full rate. If
the uplink or
downlink
receive
quality level
of an AMR
AMRHALFTOFUL half rate call
GCELLHOB AMR H-F Ho Qual. SET
LHOQUALTHRES BSC6910 is equal to or
ASIC Threshold GCELLHOBASIC
H greater than
"AMRHALFT
OFULLHOQ
UALTHRESH
"+
"AMRH2FHO
QUALFINE"*
0.1, the AMR
call is
handed over
from half rate
to full rate.

06/12/2015 华为机密,未经许可不得扩散 第55页,共597页


273357673.xlsx 文档密级:

When
"AMRFULLT
OHALFHOAL
LOW" is set
to YES and
the load of a
cell is lower
than this
threshold, a
decision on
AMR H-F
handovers is
made. When
GCELLHOB AMRHALFTOFUL AMR H-F Traffic SET
BSC6910 "IBCAIIHRPri
ASIC LHOTHRESH Threshold GCELLHOBASIC
Sw" is set to
YES and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.

Whether to
enable the
GCELLHOB BETTERCELLHO Better Cell Handover SET algorithm for
BSC6910
ASIC EN Enable GCELLHOBASIC the handover
to a better
cell

06/12/2015 华为机密,未经许可不得扩散 第56页,共597页


273357673.xlsx 文档密级:

HO
Hysteresis".F
or an MS
with high
receive level,
the receive
level of the
neighboring
cell must be
greater than
or equal to
the receive
level of the
serving cell
plus
"INTERCELL
HYST".In the
overlaid
GCELLHOB EDGEHOHYSTE Low Hysteresis SET subcell of a
BSC6910
ASIC N Allowed for Edge HO GCELLHOBASIC concentric
cell, the BSC
regards an
MS as a low-
level MS
after
detecting that
the downlink
receive level
of the MS is
less than the
value of
"DLEDGETH
RES". In
other
scenarios,
the BSC
regards an
MS as a low-

06/12/2015 华为机密,未经许可不得扩散 第57页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
GCELLHOB Handover Algorithm II SET
EDGELAST BSC6910 measuremen
ASIC Edge HO Valid Time GCELLHOBASIC
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
GCELLHOB Handover Algorithm II SET
EDGESTAT BSC6910 measuremen
ASIC Edge HO Watch Time GCELLHOBASIC
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

06/12/2015 华为机密,未经许可不得扩散 第58页,共597页


273357673.xlsx 文档密级:

handover
based on the
load.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
GCELLHOB F2HHOLOADSTF F-H HO Load Band SET or non-AMR
BSC6910
ASIC SWITCH Optimization Allowed GCELLHOBASIC TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRHAL
FTOFULLTH
RESH"+"Full
ToHalfHoLoa
dStf", an
AMR or non-

ATCB
threshold for
the overlaid
subcell,
which is
equal to the
GCELLHOB FULLTOHALFHO F-H ATCB Offset SET sum of
BSC6910
ASIC ATCBOFFSET Overlay GCELLHOBASIC TCHF-TCHH
handover
ATCB
threshold and
the value of
this
parameter.

06/12/2015 华为机密,未经许可不得扩散 第59页,共597页


273357673.xlsx 文档密级:

Duration of
the handover
from full rate
to half rate. If
the cell load
is greater
than the
preset
threshold, the
GCELLHOB FULLTOHALFHO SET calls that
F-H Ho Duration BSC6910
ASIC DURATION GCELLHOBASIC meet the
conditions for
the handover
from full rate
to half rate
are handed
over from full
rate to half
rate in this
duration.

06/12/2015 华为机密,未经许可不得扩散 第60页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
GCELLHOB FULLTOHALFHOL SET
F-H Ho Last Time BSC6910 handovers,
ASIC ASTTIME GCELLHOBASIC
such
handovers
are triggered.
This
parameter
specifies the
number P.

Threshold of
path loss for
TCHF-TCHH
handovers in
overlaid
subcells,
which is
GCELLHOB FULLTOHALFHO F-H Pathloss Offset SET
BSC6910 equal to the
ASIC PATHOFFSET Overlay GCELLHOBASIC
difference
between path
loss for
TCHF-TCHH
handovers
and this
parameter.

06/12/2015 华为机密,未经许可不得扩散 第61页,共597页


273357673.xlsx 文档密级:

AMR TCHF-
to-TCHH
handovers.
When the
cell load is
higher than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
RESH", the
calls that
meet the
conditions for
AMR TCHF-
GCELLHOB FULLTOHALFHO SET
F-H Ho Period BSC6910 to-TCHH
ASIC PERIOD GCELLHOBASIC
handovers
can be
handed over
from a TCHF
to a TCHH
within the
period
specified by
"FULLTOHAL
FHODURATI
ON". This
parameter is
also used to
specify the
bandwidth for
handovers at
each
hierarchy

06/12/2015 华为机密,未经许可不得扩散 第62页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
GCELLHOB FULLTOHALFHO SET
F-H Ho Stat. Time BSC6910 handovers,
ASIC STATTIME GCELLHOBASIC
such
handovers
are triggered.
This
parameter
specifies the
number N.

06/12/2015 华为机密,未经许可不得扩散 第63页,共597页


273357673.xlsx 文档密级:

RESH",
"AMRHALFT
OFULLHOTH
RESH" and
"NOAMRHAL
FTOFULLTH
RESH"to
prevent ping-
pong
handovers.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
GCELLHOB FullToHalfHoLoad TCHF-TCHH HO Load SET
BSC6910 cell load is
ASIC Stf Hysteresis GCELLHOBASIC
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
or non-AMR
TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the

06/12/2015 华为机密,未经许可不得扩散 第64页,共597页


273357673.xlsx 文档密级:

Difference
between the
ATCB
threshold in
an overlaid
subcell and
GCELLHOB HALFTOFULLATC H-F ATCB Offset SET
BSC6910 that in an
ASIC BOFFSET Overlay GCELLHOBASIC
underlaid
subcell
during AMR
TCHH-to-
TCHF
handovers.

06/12/2015 华为机密,未经许可不得扩散 第65页,共597页


273357673.xlsx 文档密级:

Period of
AMR TCHH-
to-TCHF
handovers.
When the
cell load is
lower than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
GCELLHOB HALFTOFULLHO SET RESH", the
H-F Ho Duration BSC6910
ASIC DURATION GCELLHOBASIC calls that
meet the
conditions for
AMR TCHH-
to-TCHF
handovers
can be
handed over
from a TCHH
to a TCHF
within the
period
specified by
this
parameter.

06/12/2015 华为机密,未经许可不得扩散 第66页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
GCELLHOB HALFTOFULLHO SET
H-F Ho Last Time BSC6910 handovers,
ASIC LASTTIME GCELLHOBASIC
such
handovers
are triggered.
This
parameter
specifies the
number P.

06/12/2015 华为机密,未经许可不得扩散 第67页,共597页


273357673.xlsx 文档密级:

Path loss
difference
GCELLHOB HALFTOFULLHO H-F Pathloss Offset SET between the
BSC6910
ASIC PATHOFFSET Overlay GCELLHOBASIC overlaid and
underlaid
subcells.

06/12/2015 华为机密,未经许可不得扩散 第68页,共597页


273357673.xlsx 文档密级:

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
GCELLHOB HALFTOFULLHO SET
H-F Ho Stat. Time BSC6910 handovers,
ASIC STATTIME GCELLHOBASIC
such
handovers
are triggered.
This
parameter
specifies the
number N.

06/12/2015 华为机密,未经许可不得扩散 第69页,共597页


273357673.xlsx 文档密级:

handover
priority in
handover
algorithm II. If
this
parameter is
set to
YES(Yes), an
edge
handover
using
handover
algorithm II is
not an
emergency
handover,
cell level,
priority, and
GCELLHOB SET
HOPRIOMODEN HO Priority Adjustment BSC6910 load are
ASIC GCELLHOBASIC
considered in
an
emergency
handover,
and a better
cell handover
takes
precedence
over an
emergency
handover. If
this
parameter is
set to
NO(No), the
handover
priority in
handover

06/12/2015 华为机密,未经许可不得扩散 第70页,共597页


273357673.xlsx 文档密级:

The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
GCELLHOB INTERFERELAST Interfere HO Valid SET
BSC6910 condition for
ASIC TIME Time GCELLHOBASIC
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the P in
the P/N
criteria.

06/12/2015 华为机密,未经许可不得扩散 第71页,共597页


273357673.xlsx 文档密级:

The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
GCELLHOB INTERFERESTAT Interfere HO Static SET
BSC6910 condition for
ASIC TIME Time GCELLHOBASIC
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the N in
the P/N
criteria.

06/12/2015 华为机密,未经许可不得扩散 第72页,共597页


273357673.xlsx 文档密级:

Whether to
allow the
interference
handover
algorithm.
Interference
handovers
are triggered
when the
receive
quality level
is greater
than the
GCELLHOB Interference HO SET expected
INTERFHOEN BSC6910
ASIC Allowed GCELLHOBASIC receive
quality
threshold
based on the
current
receive level.
That is,
handovers
are required
when the
MSs are
subject to all
kinds of radio
interferences.

06/12/2015 华为机密,未经许可不得扩散 第73页,共597页


273357673.xlsx 文档密级:

Whether to
optimize load
control
method for
TCHF-TCHH
handovers. If
this
parameter is
set to YES,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
GCELLHOB INTRACELLFHOP Intra-cell F/H Load SET
BSC6910 determined
ASIC TSWITCH Control Optimization GCELLHOBASIC
based on the
load range. If
this
parameter is
set to NO,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
determined
based on the
signal level
band range.

06/12/2015 华为机密,未经许可不得扩散 第74页,共597页


273357673.xlsx 文档密级:

during non-
AMR TCHF-
to-TCHH
handovers.
This
parameter is
used with
"NOAMRFUL
LTOHALFHO
QUALTHRES
H". Non-AMR
TCHF-to-
TCHH
handovers
can be
triggered
when both of
Non-AMR F-H HO the following
GCELLHOB NOAMRF2HHOQ SET
Quality Thres. Fine BSC6910 conditions
ASIC UALTHFINE GCELLHOBASIC
Tune are met:
Uplink
receive
signal quality
<= Value of
"NOAMRFUL
LTOHALFHO
QUALTHRES
H" + Value of
"NOAMRF2H
HOQUALTH
FINE" x 0.1
Downlink
receive
signal quality
<= Value of
"NOAMRFUL
LTOHALFHO

06/12/2015 华为机密,未经许可不得扩散 第75页,共597页


273357673.xlsx 文档密级:

Whether to
GCELLHOB NOAMRFULLTOH Non-AMR F-H Ho SET allow non-
BSC6910
ASIC ALFHOALLOW Allowed GCELLHOBASIC AMR voice F-
H handover.

06/12/2015 华为机密,未经许可不得扩散 第76页,共597页


273357673.xlsx 文档密级:

Decides the
offset of the
current ATCB
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
NOAMRFULLTOH thus
GCELLHOB Non-AMR F-H Ho SET
ALFHOATCBADJ BSC6910 selecting
ASIC ATCB Adjust Step GCELLHOBASIC
STEP target users
for F-H
handovers.
ATCB offset
= (Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR F-
H Ho ATCB
Adjust Step".

06/12/2015 华为机密,未经许可不得扩散 第77页,共597页


273357673.xlsx 文档密级:

Threshold for
the AdapTive
Cell Border
(ATCB)
during non-
AMR TCHF-
to-TCHH
handovers.
Non-AMR
TCHF-to-
TCHH
NOAMRFULLTOH handovers
GCELLHOB Non-AMR F-H Ho SET
ALFHOATCBTHR BSC6910 can be
ASIC ATCB Threshold GCELLHOBASIC
ESH triggered
when the
following
condition is
met:
ATCB of a
non-AMR
full-rate call +
ATCB offset
>= Value of
this
parameter

06/12/2015 华为机密,未经许可不得扩散 第78页,共597页


273357673.xlsx 文档密级:

Decides the
current path
cost offset
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
thus
NOAMRFULLTOH selecting
GCELLHOB Non-AMR F-H Ho SET
ALFHOPATHADJ BSC6910 target users
ASIC Pathloss Adjust Step GCELLHOBASIC
STEP for F-H
handovers.
Path cost
offset =
(Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR F-
H Ho
Pathloss
Adjust Step".

06/12/2015 华为机密,未经许可不得扩散 第79页,共597页


273357673.xlsx 文档密级:

Threshold for
the path loss
during non-
AMR TCHF-
to-TCHH
handovers.
Non-AMR
TCHF-to-
TCHH
handovers
NOAMRFULLTOH can be
GCELLHOB Non-AMR F-H Ho SET
ALFHOPATHTHR BSC6910 triggered
ASIC Pathloss Threshold GCELLHOBASIC
ESH when the
following
condition is
met:
Path loss of
an AMR full-
rate call <=
Value of this
parameter +
Path loss
offset.

06/12/2015 华为机密,未经许可不得扩散 第80页,共597页


273357673.xlsx 文档密级:

Quality
threshold for
non-AMR F-
H handovers.
When the
uplink
receive
quality and
downlink
receive
quality of a
NOAMRFULLTOH user are both
GCELLHOB Non-AMR F-H Ho SET
ALFHOQUALTHR BSC6910 equal to or
ASIC Qual. Threshold GCELLHOBASIC
ESH less than
"NOAMRFUL
LTOHALFHO
QUALTHRES
H" +
"NOAMRF2H
HOQUALTH
FINE"*0.1, a
F-H
handover can
be triggered
for the user.

06/12/2015 华为机密,未经许可不得扩散 第81页,共597页


273357673.xlsx 文档密级:

Threshold for
the load in a
cell during
non-AMR
TCHF-to-
TCHH
handovers.
Non-AMR
GCELLHOB NOAMRFULLTOH Non-AMR F-H Traffic SET
BSC6910 TCHF-to-
ASIC ALFTHRESH Threshold GCELLHOBASIC
TCHH
handover
decisions can
be made
when the cell
load is higher
than this
threshold.

06/12/2015 华为机密,未经许可不得扩散 第82页,共597页


273357673.xlsx 文档密级:

during non-
AMR TCHH-
to-TCHF
handovers.
This
parameter is
used with
"NOAMRHAL
FTOFULLHO
QUALTHRES
H". Non-AMR
TCHH-to-
TCHF
handovers
can be
triggered
when either
of the
Non-AMR H-F HO
GCELLHOB NOAMRH2FHOQ SET following
Quality Thres. Fine BSC6910
ASIC UALFINE GCELLHOBASIC conditions is
Tune
met:
Uplink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
H" + Value of
"NOAMRH2F
HOQUALFIN
E" x 0.1
Downlink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO

When the
ATCB value
of non-AMR
half rate
voice is equal
NOAMRHALFTOF
GCELLHOB Non-AMR H-F Ho SET to or less
ULLHOATCBTHR BSC6910
ASIC ATCB Threshold GCELLHOBASIC than this
ESH
threshold, the
condition for
non-AMR H-
F handovers
is met.

06/12/2015 华为机密,未经许可不得扩散 第83页,共597页


273357673.xlsx 文档密级:

When the
path loss
value of non-
AMR half
rate voice is
NOAMRHALFTOF
GCELLHOB Non-AMR H-F Ho SET no smaller
ULLHOPATHTHR BSC6910
ASIC Pathloss Threshold GCELLHOBASIC than this
ESH
threshold, the
condition for
non-AMR H-
F handovers
is met.

Whether to
trigger non-
AMR H-F
NOAMRHALFTOF handovers
GCELLHOB Allow Non-AMR H-F SET
ULLHOQUALALL BSC6910 according to
ASIC Quality-based HO GCELLHOBASIC
OW the uplink
and downlink
receive
quality.

06/12/2015 华为机密,未经许可不得扩散 第84页,共597页


273357673.xlsx 文档密级:

AMR TCHH-
to-TCHF
handovers.
This
parameter is
used with
"NOAMRHAL
FTOFULLHO
QUALTHRES
H". Non-AMR
TCHH-to-
TCHF
handovers
can be
triggered
when either
of the
following
NOAMRHALFTOF
GCELLHOB Non-AMR H-F Ho SET conditions is
ULLHOQUALTHR BSC6910
ASIC Qual. Threshold GCELLHOBASIC met:
ESH
Uplink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
H" + Value of
"NOAMRH2F
HOQUALFIN
E" x 0.1
Downlink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES

06/12/2015 华为机密,未经许可不得扩散 第85页,共597页


273357673.xlsx 文档密级:

When
"NOAMRFUL
LTOHALFHO
ALLOW" is
set to YES
and the load
of a cell is
lower than
this
threshold, a
decision on
non-AMR H-
F handovers
is made.
GCELLHOB NOAMRHALFTOF Non-AMR H-F Traffic SET
BSC6910 When
ASIC ULLTHRESH Threshold GCELLHOBASIC
"IBCAIIHRPri
Sw" is set to
ON and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.

Whether to
perform path
loss-based
GCELLHOB SET
PATHLOSSHOEN Pathloss Ho. Enable BSC6910 sorting in a
ASIC GCELLHOBASIC
better cell
handover
algorithm.

06/12/2015 华为机密,未经许可不得扩散 第86页,共597页


273357673.xlsx 文档密级:

An
emergency
handover
due to bad
quality is
triggered
GCELLHOE
ULQUALIMIT UL Qual. Threshold BSC6910 SET GCELLHOEMG when the
MG
uplink
receive
quality is not
smaller than
"UL Qual.
Threshold".

filtering
algorithm is
enabled. If
this
parameter is
set to
YES(Yes),
the initial
incremental
filtering
algorithm is
enabled
when a call
accesses a
new channel,
and the timer
specified by
"TCHHOMINI
GCELLHOFI Initial Increment SET
INITUPFILEN BSC6910 NTV" or
TPEN Filtering Allowed GCELLHOFITPEN
"SDHOMININ
TV" is
enabled
simultaneous
ly with
incremental
filtering. If
this
parameter is
set to
NO(No), the
initial
incremental
filtering
algorithm is
disabled.
This
parameter is

06/12/2015 华为机密,未经许可不得扩散 第87页,共597页


273357673.xlsx 文档密级:

Period in
which
interference
handovers
are not
GCELLHOFI INTERFEREHOP Penalty Time on SET
BSC6910 allowed after
TPEN ENTIME Interfere HO GCELLHOFITPEN
a successful
or failed
interference
handover is
performed.

After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
GCELLHOFI LOADHOPENTIM Penalty Time on Load SET Load HO" by
BSC6910
TPEN E HO GCELLHOFITPEN subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.

06/12/2015 华为机密,未经许可不得扩散 第88页,共597页


273357673.xlsx 文档密级:

After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
GCELLHOFI LOADHOPENVAL Penalty Value on Load SET Load HO" by
BSC6910
TPEN UE HO GCELLHOFITPEN subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.

06/12/2015 华为机密,未经许可不得扩散 第89页,共597页


273357673.xlsx 文档密级:

Whether to
enable
penalty
inheritance
for load-
based
handovers.
With the
handover
GCELLHOFI LoadHoPunishInh Load HO Penalty SET
BSC6910 penalty
TPEN eritSwitch Optimization GCELLHOFITPEN
inheritance
function, the
penalty list
will be
transferred to
the target cell
along with a
call
handover.

06/12/2015 华为机密,未经许可不得扩散 第90页,共597页


273357673.xlsx 文档密级:

For the
purpose of
accurately
reflecting the
radio
environment
of a network,
filtering is
performed on
the
measured
values in
several
consecutive
GCELLHOFI NCell Filter Length for SET measuremen
NSIGSTRFLTLEN BSC6910
TPEN SDCCH Level GCELLHOFITPEN t reports.
This
parameter
indicates the
number of
measuremen
t reports
received on
signaling
channels
used for the
filtering of
neighboring
cell signal
strength.

06/12/2015 华为机密,未经许可不得扩散 第91页,共597页


273357673.xlsx 文档密级:

When the
network
receives
measuremen
t reports, the
measuremen
t values in
several
straight
measuremen
t reports are
filtered to
reflect the
radio
GCELLHOFI TASIGSTRFLTLE TA Filter Length for SET
BSC6910 operating
TPEN N SDCCH Level GCELLHOFITPEN
environment
for the sake
of accuracy.
This
parameter
specifies the
number of
measuremen
t reports
sampled for
filtering the
TA on the
signaling
channel.

06/12/2015 华为机密,未经许可不得扩散 第92页,共597页


273357673.xlsx 文档密级:

Initial signal
level used to
compute the
handover
zone for an
MS during
the
hierarchical
GCELLHOIU ENUTOOLOADINI IniLev for EnUtoO load-based
BSC6910 SET GCELLHOIUO
O LEV Load HO handover
from the
underlaid
subcell to the
overlaid
subcell of the
enhanced
concentric
cell.

06/12/2015 华为机密,未经许可不得扩散 第93页,共597页


273357673.xlsx 文档密级:

concentric
cell. When
this
parameter is
set to
TCHMAXPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the maximum
TCH transmit
power. When
this
parameter is
GCELLHOIU IUOOlPowerComp Overlaid Level Power set to
BSC6910 SET GCELLHOIUO
O Policy Compensate Policy ULBCCHPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the BCCH
level of the
underlaid
subcell for an
enhanced
concentric
cell or using
the sum of
maximum
TCH transmit
power and

06/12/2015 华为机密,未经许可不得扩散 第94页,共597页


273357673.xlsx 文档密级:

underlaid
subcell. If this
parameter is
set to YES,
the number
of MSs to be
handed over
is accurately
determined
based on the
load range
when load-
based
handovers
are
performed
between
overlaid and
GCELLHOIU UOLOADOPTSWI OL/UL Load Control underlaid
BSC6910 SET GCELLHOIUO
O TCH Optimization subcells in an
enhanced
concentric
cell. If this
parameter is
set to NO,
the number
of MSs is
determined
based on the
signal level
band range
when load-
based
handovers
are
performed
between
overlaid and

06/12/2015 华为机密,未经许可不得扩散 第95页,共597页


273357673.xlsx 文档密级:

IsKey Mandatory Feature ID Feature Name Value Type GUI Value Range

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第96页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第97页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第98页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~128
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第99页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~127
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第100页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第101页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第102页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
GBFD- Dynamic Power
NO NO Interval Type 0~127
118106 Sharing
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第103页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Enumeration Type NO(No), YES(Yes)
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第104页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第105页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第106页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~8
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第107页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~8
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第108页,共597页


273357673.xlsx 文档密级:

Dynamic
Adjustment
GBFD-
Between FR and
113402
NO NO HR Enumeration Type NO(No), YES(Yes)
GBFD-
AMR FR/HR
115504
Dynamic
Adjustment

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第109页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~200
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第110页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~200
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第111页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -30~30
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第112页,共597页


273357673.xlsx 文档密级:

GBFD-
Concentric Cell
113201
NO NO HUAWEI II Interval Type -30~30
GBFD-
Handover
510501

06/12/2015 华为机密,未经许可不得扩散 第113页,共597页


273357673.xlsx 文档密级:

GBFD-
Concentric Cell
113201
NO NO HUAWEI II Interval Type -30~30
GBFD-
Handover
510501

06/12/2015 华为机密,未经许可不得扩散 第114页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -30~30
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第115页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -30~30
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第116页,共597页


273357673.xlsx 文档密级:

GBFD-
Concentric Cell
113201
NO NO HUAWEI II Interval Type -30~30
GBFD-
Handover
510501

06/12/2015 华为机密,未经许可不得扩散 第117页,共597页


273357673.xlsx 文档密级:

GBFD-
Concentric Cell
113201
NO NO HUAWEI II Interval Type -30~30
GBFD-
Handover
510501

06/12/2015 华为机密,未经许可不得扩散 第118页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -30~30
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第119页,共597页


273357673.xlsx 文档密级:

GBFD-
Concentric Cell
113201
NO NO HUAWEI II Enumeration Type NO(No), YES(Yes)
GBFD-
Handover
510501

06/12/2015 华为机密,未经许可不得扩散 第120页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第121页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~255
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第122页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~63
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第123页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~20
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第124页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第125页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
113402 Between FR and
NO NO Interval Type 0~9
GBFD- HR
510501 HUAWEI II
Handover

06/12/2015 华为机密,未经许可不得扩散 第126页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
NO NO Enumeration Type NO(No), YES(Yes)
110601 Handover

06/12/2015 华为机密,未经许可不得扩散 第127页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第128页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -63~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第129页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第130页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第131页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~7
510501 Handover

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第132页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
113402 Between FR and
NO NO Interval Type 0~9
GBFD- HR
510501 HUAWEI II
Handover

06/12/2015 华为机密,未经许可不得扩散 第133页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -63~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第134页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第135页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
NO NO Enumeration Type NO(No), YES(Yes)
110601 Handover

06/12/2015 华为机密,未经许可不得扩散 第136页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
NO NO Interval Type 0~7
110601 Handover

06/12/2015 华为机密,未经许可不得扩散 第137页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第138页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第139页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第140页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
NO NO Enumeration Type OFF(Off), ON(On)
113402 Between FR and
HR

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第141页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~600
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第142页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第143页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~600
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第144页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第145页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
113402 Between FR and
NO NO Interval Type 0~100
GBFD- HR
510501 HUAWEI II
Handover

06/12/2015 华为机密,未经许可不得扩散 第146页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第147页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~600
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第148页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第149页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第150页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~32
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第151页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第152页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第153页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 1~16
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第154页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Enumeration Type NO(No), YES(Yes)
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第155页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第156页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
113402 Between FR and
NO NO Interval Type 0~9
GBFD- HR
510501 HUAWEI II
Handover

06/12/2015 华为机密,未经许可不得扩散 第157页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Enumeration Type NO(No), YES(Yes)
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第158页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第159页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type -63~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第160页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第161页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第162页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~7
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第163页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第164页,共597页


273357673.xlsx 文档密级:

Dynamic
GBFD- Adjustment
113402 Between FR and
NO NO Interval Type 0~9
GBFD- HR
510501 HUAWEI II
Handover

GBFD- HUAWEI II
NO NO Interval Type -63~255
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第165页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~255
510501 Handover

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第166页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~7
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第167页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI II
NO NO Interval Type 0~100
510501 Handover

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第168页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~70
GBFD- HUAWEI II
510501 Handover

GBFD- HUAWEI II
NO NO Enumeration Type NO(No), YES(Yes)
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第169页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~255
GBFD- HUAWEI II
510501 Handover

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~255
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第170页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 0~63
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第171页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Enumeration Type OFF(Off), ON(On)
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第172页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~31
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第173页,共597页


273357673.xlsx 文档密级:

GBFD- HUAWEI I
110601 Handover
NO NO Interval Type 1~31
GBFD- HUAWEI II
510501 Handover

06/12/2015 华为机密,未经许可不得扩散 第174页,共597页


273357673.xlsx 文档密级:

GBFD-
NO NO Concentric Cell Interval Type 0~63
113201

06/12/2015 华为机密,未经许可不得扩散 第175页,共597页


273357673.xlsx 文档密级:

TCHMAXPOWER(Tc
GBFD- h Max Power),
NO NO Concentric Cell Enumeration Type
113201 ULBCCHPOWER(Un
derlaid BCCH Power)

06/12/2015 华为机密,未经许可不得扩散 第176页,共597页


273357673.xlsx 文档密级:

GBFD-
NO NO Concentric Cell Enumeration Type NO(No), YES(Yes)
113201

06/12/2015 华为机密,未经许可不得扩散 第177页,共597页


273357673.xlsx 文档密级:

Enumeration Number/Bit Unit Actual Value Range Default Value

N/A 480ms 480~15360 4

06/12/2015 华为机密,未经许可不得扩散 第178页,共597页


273357673.xlsx 文档密级:

N/A 480ms 480~15360 6

06/12/2015 华为机密,未经许可不得扩散 第179页,共597页


273357673.xlsx 文档密级:

470ms; 480~7680(TCH);470~752
N/A 1
480ms 0(SDCCH)

470ms; 480~7680(TCH);470~752
N/A 1
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第180页,共597页


273357673.xlsx 文档密级:

N/A dB 0~128 72

06/12/2015 华为机密,未经许可不得扩散 第181页,共597页


273357673.xlsx 文档密级:

N/A None -64~63 64

06/12/2015 华为机密,未经许可不得扩散 第182页,共597页


273357673.xlsx 文档密级:

N/A 0.5s 0.5~8 2

06/12/2015 华为机密,未经许可不得扩散 第183页,共597页


273357673.xlsx 文档密级:

N/A 0.5s 0.5~8 3

06/12/2015 华为机密,未经许可不得扩散 第184页,共597页


273357673.xlsx 文档密级:

N/A dB -64~63 68

06/12/2015 华为机密,未经许可不得扩散 第185页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第186页,共597页


273357673.xlsx 文档密级:

470ms; 480~7680(TCH);470~752
N/A 1
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第187页,共597页


273357673.xlsx 文档密级:

470ms; 480~7680(TCH);470~752
N/A 1
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第188页,共597页


273357673.xlsx 文档密级:

470ms; 480~3840(TCH);470~376
N/A 1
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第189页,共597页


273357673.xlsx 文档密级:

470ms; 480~3840(TCH);470~376
N/A 1
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第190页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

N/A None 0~100 100

06/12/2015 华为机密,未经许可不得扩散 第191页,共597页


273357673.xlsx 文档密级:

N/A s 1~200 20

06/12/2015 华为机密,未经许可不得扩散 第192页,共597页


273357673.xlsx 文档密级:

N/A s 1~200 6

06/12/2015 华为机密,未经许可不得扩散 第193页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第194页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第195页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 10

06/12/2015 华为机密,未经许可不得扩散 第196页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第197页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第198页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 -10

06/12/2015 华为机密,未经许可不得扩散 第199页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第200页,共597页


273357673.xlsx 文档密级:

N/A dB -30~30 0

06/12/2015 华为机密,未经许可不得扩散 第201页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第202页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第203页,共597页


273357673.xlsx 文档密级:

N/A s 1~255 10

06/12/2015 华为机密,未经许可不得扩散 第204页,共597页


273357673.xlsx 文档密级:

N/A dB 0~63 25

06/12/2015 华为机密,未经许可不得扩散 第205页,共597页


273357673.xlsx 文档密级:

N/A None 1~20 3

06/12/2015 华为机密,未经许可不得扩散 第206页,共597页


273357673.xlsx 文档密级:

N/A None 0~100 0

06/12/2015 华为机密,未经许可不得扩散 第207页,共597页


273357673.xlsx 文档密级:

N/A None 0~9 0

06/12/2015 华为机密,未经许可不得扩散 第208页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第209页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 2

06/12/2015 华为机密,未经许可不得扩散 第210页,共597页


273357673.xlsx 文档密级:

N/A dB -63~255 20

06/12/2015 华为机密,未经许可不得扩散 第211页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 1

06/12/2015 华为机密,未经许可不得扩散 第212页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 100

06/12/2015 华为机密,未经许可不得扩散 第213页,共597页


273357673.xlsx 文档密级:

N/A None 0~7 0

N/A % 0~100 75

06/12/2015 华为机密,未经许可不得扩散 第214页,共597页


273357673.xlsx 文档密级:

N/A None 0~9 0

06/12/2015 华为机密,未经许可不得扩散 第215页,共597页


273357673.xlsx 文档密级:

N/A dB -63~255 4

06/12/2015 华为机密,未经许可不得扩散 第216页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 108

06/12/2015 华为机密,未经许可不得扩散 第217页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第218页,共597页


273357673.xlsx 文档密级:

N/A None 0~7 3

06/12/2015 华为机密,未经许可不得扩散 第219页,共597页


273357673.xlsx 文档密级:

N/A % 0~100 15

NO~0, YES~1 None NO, YES YES(Yes)

06/12/2015 华为机密,未经许可不得扩散 第220页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第221页,共597页


273357673.xlsx 文档密级:

470ms; 480~15360(TCH);470~15
N/A 1
480ms 040(SDCCH)

470ms; 480~15360(TCH);470~15
N/A 1
480ms 040(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第222页,共597页


273357673.xlsx 文档密级:

OFF~0, ON~1 None OFF, ON OFF(Off)

N/A dB 0~255 20

06/12/2015 华为机密,未经许可不得扩散 第223页,共597页


273357673.xlsx 文档密级:

N/A s 0~600 5

06/12/2015 华为机密,未经许可不得扩散 第224页,共597页


273357673.xlsx 文档密级:

N/A 480ms 480~15360 4

N/A dB 0~255 10

06/12/2015 华为机密,未经许可不得扩散 第225页,共597页


273357673.xlsx 文档密级:

N/A s 0~600 1

06/12/2015 华为机密,未经许可不得扩散 第226页,共597页


273357673.xlsx 文档密级:

N/A 480ms 480~15360 6

06/12/2015 华为机密,未经许可不得扩散 第227页,共597页


273357673.xlsx 文档密级:

N/A None 0~100 10

06/12/2015 华为机密,未经许可不得扩散 第228页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 20

06/12/2015 华为机密,未经许可不得扩散 第229页,共597页


273357673.xlsx 文档密级:

N/A s 0~600 5

06/12/2015 华为机密,未经许可不得扩散 第230页,共597页


273357673.xlsx 文档密级:

N/A 480ms 480~15360 4

06/12/2015 华为机密,未经许可不得扩散 第231页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 10

06/12/2015 华为机密,未经许可不得扩散 第232页,共597页


273357673.xlsx 文档密级:

N/A 480ms 480~15360 6

06/12/2015 华为机密,未经许可不得扩散 第233页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第234页,共597页


273357673.xlsx 文档密级:

470ms; 480~7680(TCH);470~752
N/A 2
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第235页,共597页


273357673.xlsx 文档密级:

470ms; 480~7680(TCH);470~752
N/A 3
480ms 0(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第236页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES YES(Yes)

06/12/2015 华为机密,未经许可不得扩散 第237页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第238页,共597页


273357673.xlsx 文档密级:

N/A None 0~9 0

06/12/2015 华为机密,未经许可不得扩散 第239页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第240页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 2

06/12/2015 华为机密,未经许可不得扩散 第241页,共597页


273357673.xlsx 文档密级:

N/A dB -63~255 30

06/12/2015 华为机密,未经许可不得扩散 第242页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 1

06/12/2015 华为机密,未经许可不得扩散 第243页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 95

06/12/2015 华为机密,未经许可不得扩散 第244页,共597页


273357673.xlsx 文档密级:

N/A None 0~7 0

06/12/2015 华为机密,未经许可不得扩散 第245页,共597页


273357673.xlsx 文档密级:

N/A % 0~100 85

06/12/2015 华为机密,未经许可不得扩散 第246页,共597页


273357673.xlsx 文档密级:

N/A None 0~9 0

N/A dB -63~255 14

06/12/2015 华为机密,未经许可不得扩散 第247页,共597页


273357673.xlsx 文档密级:

N/A dB 0~255 103

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第248页,共597页


273357673.xlsx 文档密级:

N/A None 0~7 2

06/12/2015 华为机密,未经许可不得扩散 第249页,共597页


273357673.xlsx 文档密级:

N/A % 0~100 25

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第250页,共597页


273357673.xlsx 文档密级:

N/A None 0~70 55

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第251页,共597页


273357673.xlsx 文档密级:

N/A s 0~255 15

N/A s 0~255 10

06/12/2015 华为机密,未经许可不得扩散 第252页,共597页


273357673.xlsx 文档密级:

N/A dB 0~63 63

06/12/2015 华为机密,未经许可不得扩散 第253页,共597页


273357673.xlsx 文档密级:

OFF~0, ON~1 None OFF, ON OFF(Off)

06/12/2015 华为机密,未经许可不得扩散 第254页,共597页


273357673.xlsx 文档密级:

470ms; 480~14880(TCH);470~14
N/A 2
480ms 570(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第255页,共597页


273357673.xlsx 文档密级:

470ms; 480~14880(TCH);470~14
N/A 2
480ms 570(SDCCH)

06/12/2015 华为机密,未经许可不得扩散 第256页,共597页


273357673.xlsx 文档密级:

N/A dB 0~63 63

06/12/2015 华为机密,未经许可不得扩散 第257页,共597页


273357673.xlsx 文档密级:

TCHMAXPOWER~0, TCHMAXPOWER, ULBCCHPOWER(Unde


None
ULBCCHPOWER~1 ULBCCHPOWER rlaid BCCH Power)

06/12/2015 华为机密,未经许可不得扩散 第258页,共597页


273357673.xlsx 文档密级:

NO~0, YES~1 None NO, YES NO(No)

06/12/2015 华为机密,未经许可不得扩散 第259页,共597页


273357673.xlsx 文档密级:

Recommended Value Initial Value Source Impact Parameter Relationship

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only when
4 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES. The
following condition must be met:
[G2GNCELL:BETTERCELLSTATT
IME] >=
[G2GNCELL:BETTERCELLLAST
TIME].

06/12/2015 华为机密,未经许可不得扩散 第260页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only when
6 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES. The
following condition must be met:
[G2GNCELL:BETTERCELLSTATT
IME] >=
[G2GNCELL:BETTERCELLLAST
TIME].

06/12/2015 华为机密,未经许可不得扩散 第261页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
1 Cell -Others:
planning)
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:BQHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:BQSTATTIME] >=
[G2GNCELL:BQLASTTIME].

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
1 Cell -Others:
planning)
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:BQHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:BQSTATTIME] >=
[G2GNCELL:BQLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第262页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal -Others:
72 Cell
planning) 1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLBASICPARA:DIRECTRYE
N] is set to YES. 2.
[G2GNCELL:INTERCELLHYST]
together determine the direct retry
handover hysteresis.

06/12/2015 华为机密,未经许可不得扩散 第263页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter is used with
"DLEDGETHRES" or
"ULEDGETHRES" to determine
Radio Planning (Internal handovers to the edge of a
64 Cell
planning) neighboring cell only if both
"Enhanced Outgoing Cell
Handover Offset" and "EDGE HO
Allowed" are set to YES(Yes).
2. This parameter is used with
"LEVHOHYST" and "HOTHRES"
to determine handovers to a better
neighboring cell only if "Enhanced
Outgoing Cell Handover Offset" is
set to YES(Yes) and
"HOCTRLSWITCH" is set to
HOALGORITHM2(Handover
algorithm II).

06/12/2015 华为机密,未经许可不得扩散 第264页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
2 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:QCKMVHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:HCSSTATTIME] >=
[G2GNCELL:HCSLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第265页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
3 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:QCKMVHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:HCSSTATTIME] >=
[G2GNCELL:HCSLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第266页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
When
[GCELLHOBASIC:HOCTRLSWIT
68(in densely populated urban Radio Planning (Internal CH] is set to
Cell
areas);72(in the suburbs) planning) HOALGORITHM1(Handover
algorithm I),
[G2GNCELL:INTERCELLHYST]
should be set within the range of
64-127.When
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II),
[G2GNCELL:INTERCELLHYST]
should be set within the range of
0-127.

06/12/2015 华为机密,未经许可不得扩散 第267页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal 1. If "HOCTRLSWITCH" in the
NO(No) Cell
planning) "SET GCELLHOBASIC" command
is set to HOALGORITHM1, and
"PBGTHOEN", "LEVHOEN",
"CONHOEN" are set to YES, this
parameter is valid.
2. If "HOCTRLSWITCH" in the
"SET GCELLHOBASIC" command
is set to HOALGORITHM2, and
"BETTERCELLHOEN" is set to
YES, this parameter is valid.

06/12/2015 华为机密,未经许可不得扩散 第268页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
1 Cell -Others:
planning)
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:TAHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:TASTATTIME] >=
[G2GNCELL:TALASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第269页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
1 Cell -Others:
planning)
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:TAHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:TASTATTIME] >=
[G2GNCELL:TALASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第270页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
1 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOEMG:NODLMRHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:ULBQSTATTIME] >=
[G2GNCELL:ULBQLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第271页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
1 Cell
planning) [GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOEMG:NODLMRHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:ULBQSTATTIME] >=
[G2GNCELL:ULBQLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第272页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes),
Default/Recommended
NO(No) Cell [GCELLHOBASIC:HOCTRLSWIT
Value
CH] is set to HOALGORITHM2,
and
[GCELLCHMGAD:TCHLOADOPT
SWITCH] is set to ON(On).

-Others:
This parameter is valid only if
Radio Planning (Internal [GCELLHOBASIC:HOCTRLSWIT
100 Cell
planning) CH] is set to
HOALGORITHM2(Handover
algorithm II).

06/12/2015 华为机密,未经许可不得扩散 第273页,共597页


273357673.xlsx 文档密级:

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
Radio Planning (Internal
20 Cell If
planning)
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.

06/12/2015 华为机密,未经许可不得扩散 第274页,共597页


273357673.xlsx 文档密级:

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
Radio Planning (Internal
6 Cell If
planning)
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:BANTIME] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.

06/12/2015 华为机密,未经许可不得扩散 第275页,共597页


273357673.xlsx 文档密级:

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
Radio Planning (Internal
0 Cell [GCELLHOBASIC:INTRACELLHO
planning)
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

06/12/2015 华为机密,未经许可不得扩散 第276页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
Default/Recommended CH] is set to HOALGORITHM2,
0 Cell
Value [GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第277页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
Default/Recommended CH] is set to HOALGORITHM2,
10 Cell
Value [GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第278页,共597页


273357673.xlsx 文档密级:

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
Radio Planning (Internal
0 Cell [GCELLHOBASIC:INTRACELLHO
planning)
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

06/12/2015 华为机密,未经许可不得扩散 第279页,共597页


273357673.xlsx 文档密级:

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
Radio Planning (Internal [GCELLHOBASIC:INTRACELLHO
0 Cell
planning) EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

06/12/2015 华为机密,未经许可不得扩散 第280页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
Default/Recommended
-10 Cell algorithm II) and
Value
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第281页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
Default/Recommended
0 Cell algorithm II) and
Value
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第282页,共597页


273357673.xlsx 文档密级:

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
Radio Planning (Internal [GCELLHOBASIC:INTRACELLHO
0 Cell
planning) EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

06/12/2015 华为机密,未经许可不得扩散 第283页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
Default/Recommended [GCELLHOBASIC:HOCTRLSWIT
NO(No) Cell
Value CH] set to HOALGORITHM2 and
[GCELLHOBASIC:INTERFHOEN]
is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第284页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
Default/Recommended CH] is set to
NO(No) Cell
Value HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:LoadHoEn] is
set to YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第285页,共597页


273357673.xlsx 文档密级:

-Others:
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and
[GCELLHOBASIC:DLEDGETHRE
10("HOCTRLSWITCH" in
S] to determine the scope of
"SET GCELLHOBASIC" is set
hierarchical load-based
to
Radio Planning (Internal handovers.
HOALGORITHM1);5("HOCTR Cell
planning) If
LSWITCH" in "SET
[GCELLHOBASIC:HOCTRLSWIT
GCELLHOBASIC" is set to
CH] is set to HOALGORITHM2,
HOALGORITHM2)
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and [G2GNCELL:EDGEHOHYST]
or
[G2GNCELL:INTERCELLHYST]
to determine the scope of
hierarchical load-based
handovers.

06/12/2015 华为机密,未经许可不得扩散 第286页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only when
[GCELLHOBASIC:LOADHOEN] is
set to YES.
If
25("HOCTRLSWITCH" in [GCELLHOBASIC:HOCTRLSWIT
"SET GCELLHOBASIC" is set CH] is set to HOALGORITHM1,
to the default value of this parameter
Radio Planning (Internal
HOALGORITHM1);8("HOCTR Cell is 25. If
planning)
LSWITCH" in "SET [GCELLHOBASIC:HOCTRLSWIT
GCELLHOBASIC" is set to CH] is set to HOALGORITHM2,
HOALGORITHM2) the default value of this parameter
is 8.
The value of this parameter must
be greater than or equal to the
value of
[GCELLHOAD:LOADHOSTEP].

06/12/2015 华为机密,未经许可不得扩散 第287页,共597页


273357673.xlsx 文档密级:

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
Radio Planning (Internal
3 Cell If
planning)
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:BANTIME] to limit
the frequency of intra-cell
handovers.

06/12/2015 华为机密,未经许可不得扩散 第288页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
Radio Planning (Internal [GCELLHOBASIC:HOCTRLSWIT
0 Cell
planning) CH] is set to
HOALGORITHM2(Handover
algorithm II).

06/12/2015 华为机密,未经许可不得扩散 第289页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
"AMRFULLTOHALFHOQUALTHR
Radio Planning (Internal
0 Cell ESH". If
planning)
"AMRFULLTOHALFHOQUALTHR
ESH" and
"AMRF2HHOQUALTHFINE" are
set to 3 and 0, respectively, the
quality threshold is 3.0.
2. The following requirement must
be met:
"AMRFULLTOHALFHOQUALTHR
ESH" x 10 +
"AMRF2HHOQUALTHFINE" <=
70.

06/12/2015 华为机密,未经许可不得扩散 第290页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
Radio Planning (Internal
NO(No) Cell HOALGORITHM2(Handover
planning)
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

06/12/2015 华为机密,未经许可不得扩散 第291页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
2 Cell
planning) -Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第292页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
20 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第293页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
1 Cell
planning) -Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第294页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
100 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第295页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
0 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
75 Cell
planning) -Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW],
[GCELLPSCHM:PDCHREFORMI
NG], or
[GCELLCHMGAD:HALFRATEREP
ACKINGSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第296页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
Radio Planning (Internal [GCELLHOBASIC:AMRHALFTOF
0 Cell
planning) ULLHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALTHRESH] is set to 3,
the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALTHRESH] x 10 +
[GCELLHOBASIC:AMRH2FHOQU
ALFINE] <= 70.

06/12/2015 华为机密,未经许可不得扩散 第297页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
4 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第298页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
108 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第299页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
Radio Planning (Internal
NO(No) Cell HOALGORITHM2(Handover
planning)
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

06/12/2015 华为机密,未经许可不得扩散 第300页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
3 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第301页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
Radio Planning (Internal The parameter will be set with
15 Cell
planning) NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES or
[GCELLIBCAII:IBCAIIHRPriSwitch
] is set to ON.

-Parameter relationship with


conditions:
This parameter is valid only when
Radio Planning (Internal
YES(Yes) Cell [GCELLHOBASIC:HOCTRLSWIT
planning)
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.

06/12/2015 华为机密,未经许可不得扩散 第302页,共597页


273357673.xlsx 文档密级:

-Others:
Default/Recommended This parameter is valid only if
NO(No) Cell
Value [GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

06/12/2015 华为机密,未经许可不得扩散 第303页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal
1 Cell This parameter is valid only when
planning)
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:FRINGEHOEN]
is set to YES. The following
condition must be met:
[GCELLHOBASIC:EDGESTAT] >=
[GCELLHOBASIC:EDGELAST].

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal
1 Cell This parameter is valid only when
planning)
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:FRINGEHOEN]
is set to YES. The following
condition must be met:
[GCELLHOBASIC:EDGESTAT] >=
[GCELLHOBASIC:EDGELAST].

06/12/2015 华为机密,未经许可不得扩散 第304页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
OFF(Off) Engineering Design Cell
NULL when it is invalid.
-Others:
This parameter is valid when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to ON.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
20 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第305页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal
5 Cell This parameter is invalid if Huawei
planning)
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES(Yes)
and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to NO(No).

06/12/2015 华为机密,未经许可不得扩散 第306页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
4 Cell
planning) [GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:FULLTOHALFH
OSTATTIME] >=
[GCELLHOBASIC:FULLTOHALFH
OLASTTIME].

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
10 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第307页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
The value of this parameter must
be smaller than or equal to the
Radio Planning (Internal value of
1 Cell
planning) [GCELLHOBASIC:FULLTOHALFH
ODURATION]. This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第308页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
Radio Planning (Internal This parameter is valid only if
6 Cell
planning) [GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:FULLTOHALFH
OSTATTIME] >=
[GCELLHOBASIC:FULLTOHALFH
OLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第309页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
10 Engineering Design Cell
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid when
[GCELLHOBASIC:F2HHOLOADS
TFSWITCH] is set to ON.

06/12/2015 华为机密,未经许可不得扩散 第310页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
Radio Planning (Internal
20 Cell [GCELLHOBASIC:AMRFULLTOH
planning)
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第311页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
Radio Planning (Internal
5 Cell parameter is valid only if
planning)
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES(Yes)
and
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
NO(No). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes) and
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
NO(No).

06/12/2015 华为机密,未经许可不得扩散 第312页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
Radio Planning (Internal [GCELLHOBASIC:AMRHALFTOF
4 Cell
planning) ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:HALFTOFULLH
OSTATTIME] >=
[GCELLHOBASIC:HALFTOFULLH
OLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第313页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
Radio Planning (Internal
10 Cell [GCELLHOBASIC:AMRFULLTOH
planning)
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第314页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
Radio Planning (Internal [GCELLHOBASIC:AMRHALFTOF
6 Cell
planning) ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:HALFTOFULLH
OSTATTIME] >=
[GCELLHOBASIC:HALFTOFULLH
OLASTTIME].

06/12/2015 华为机密,未经许可不得扩散 第315页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
Default/Recommended [GCELLHOBASIC:HOCTRLSWIT
NO(No) Cell
Value CH] is set to
HOALGORITHM2(Handover
algorithm II).

06/12/2015 华为机密,未经许可不得扩散 第316页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
Radio Planning (Internal
2 Cell [GCELLHOBASIC:INTERFHOEN]
planning)
is set to YES and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The following condition must be
met:
[GCELLHOBASIC:INTERFEREST
ATTIME] >=
[GCELLHOBASIC:INTERFERELA
STTIME].

06/12/2015 华为机密,未经许可不得扩散 第317页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
Radio Planning (Internal
3 Cell [GCELLHOBASIC:INTERFHOEN]
planning)
is set to YES and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The following condition must be
met:
[GCELLHOBASIC:INTERFEREST
ATTIME] >=
[GCELLHOBASIC:INTERFERELA
STTIME].

06/12/2015 华为机密,未经许可不得扩散 第318页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
either of the following conditions is
met: 1.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
Radio Planning (Internal HOALGORITHM1(Handover
YES(Yes) Cell
planning) algorithm I). 2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes).

06/12/2015 华为机密,未经许可不得扩散 第319页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
Default/Recommended [GCELLHOBASIC:INTRACELLHO
NO(No) Cell
Value EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

06/12/2015 华为机密,未经许可不得扩散 第320页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
Radio Planning (Internal [GCELLHOBASIC:NOAMRFULLT
0 Cell
planning) OHALFHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] is set
to 3, the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] x 10 +
[GCELLHOBASIC:NOAMRF2HHO
QUALTHFINE] <= 70.

06/12/2015 华为机密,未经许可不得扩散 第321页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
Radio Planning (Internal
NO(No) Cell HOALGORITHM2(Handover
planning)
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

06/12/2015 华为机密,未经许可不得扩散 第322页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
2 Cell -Others:
planning)
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第323页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
30 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第324页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
Radio Planning (Internal
1 Cell -Others:
planning)
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第325页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
95 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第326页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
0 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第327页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
85 Cell
planning) -Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW],
[GCELLPSCHM:PDCHREFORMI
NG], or
[GCELLCHMGAD:HALFRATEREP
ACKINGSWITCH] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第328页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
Radio Planning (Internal [GCELLHOBASIC:NOAMRFULLT
0 Cell
planning) OHALFHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] is set
to 3, the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] x 10 +
[GCELLHOBASIC:NOAMRF2HHO
QUALTHFINE] <= 70.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
14 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第329页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
Radio Planning (Internal HOALGORITHM1.
103 Cell
planning) The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
Radio Planning (Internal
NO(No) Cell HOALGORITHM2(Handover
planning)
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

06/12/2015 华为机密,未经许可不得扩散 第330页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
2 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES.

06/12/2015 华为机密,未经许可不得扩散 第331页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
Radio Planning (Internal
25 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES
or
[GCELLIBCAII:IBCAIIHRPriSwitch
] is set to ON.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
NO(No) Cell
planning) -Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第332页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:BQHOEN] is
set to YES or
Radio Planning (Internal
55 Cell [GCELLHOBASIC:HOCTRLSWIT
planning)
CH] is set to HOALGORITHM2
and
[GCELLHOEMG:NODLMRHOEN]
is set to YES.

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
Default/Recommended HOALGORITHM2(Handover
NO(No) Cell
Value algorithm II) and
[GCELLHOCTRL:BTSMESRPTP
REPROC] is set to
BSC_Preprocessing(BSC
preprocessing).

06/12/2015 华为机密,未经许可不得扩散 第333页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
Radio Planning (Internal NULL when it is invalid.
15 Cell
planning) -Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:INTERFHOEN]
is set to YES.

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
Radio Planning (Internal
10 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第334页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
Radio Planning (Internal
63 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第335页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
OFF(Off) Engineering Design Cell
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第336页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
Radio Planning (Internal
2 Cell The parameter will be set with
planning)
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

06/12/2015 华为机密,未经许可不得扩散 第337页,共597页


273357673.xlsx 文档密级:

is not equal to 80, the value of


[GCELLHOAD:ABCWaitMaxTime]
must be greater than five times the
maximum value of the following
filters:
[GCELLHOFITPEN:SIGSTRFLTL
EN],
[GCELLHOFITPEN:SIGQUAFLTL
EN],
[GCELLHOFITPEN:DATASTRFLT
LEN],
[GCELLHOFITPEN:DATAQUAFLT
LEN],
[GCELLHOFITPEN:TAFLTLEN],
and
[GCELLHOFITPEN:TASIGSTRFL
TLEN]. If
[GCELLCHMGAD:IBCAALLOWE
Radio Planning (Internal D] is set to Yes, the value of
2 Cell
planning) [GCELLHOAD:ABCWaitMaxTime]
must be greater than five times the
value of
[GCELLCHMGAD:IBCAASSWAIT
MEASURERPTTIME]. If
[GCELLHOAD:SDCCHWaitMREn]
is set to Yes, the value of
[GCELLHOAD:ABCWaitMaxTime]
must be greater than that of
[GCELLHOAD:SDCCHWaitMRTim
eLen].
-Parameter relationship with
conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:

06/12/2015 华为机密,未经许可不得扩散 第338页,共597页


273357673.xlsx 文档密级:

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOIUO:HOCTRLSWITCH
] is set to HOALGORITHM2.
The parameter will be set with
Radio Planning (Internal
63 Cell NULL when it is invalid.
planning)
-Others:
This parameter is valid only when
[GCELL:IUOTP] is set to
Concentric_cell and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

06/12/2015 华为机密,未经许可不得扩散 第339页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if all of
the following conditions are met:
1.
[GCELLPWRBASIC:PWRCTRLS
W] is set to PWR3 and
ULBCCHPOWER(Underlaid Default/Recommended [GCELLPWR3:PWRCTRLOPTIMI
Cell
BCCH Power) Value ZEDEN] is set to YES.
2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
3.
[GCELLOTHEXT:PCHOCMPCON]
is set to YES.

06/12/2015 华为机密,未经许可不得扩散 第340页,共597页


273357673.xlsx 文档密级:

-Others:
This parameter is valid only if
Default/Recommended [GCELLHOBASIC:INTRACELLHO
NO(No) Cell
Value EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

06/12/2015 华为机密,未经许可不得扩散 第341页,共597页


273357673.xlsx 文档密级:

Access Service Interrupted After Modification Interruption Scope

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第342页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第343页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第344页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第345页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第346页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第347页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第348页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第349页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第350页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第351页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第352页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第353页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第354页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第355页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第356页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第357页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第358页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第359页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第360页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第361页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第362页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第363页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第364页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第365页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第366页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第367页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第368页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第369页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第370页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第371页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第372页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第373页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第374页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第375页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第376页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第377页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第378页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第379页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第380页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第381页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第382页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第383页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第384页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第385页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第386页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第387页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第388页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第389页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第390页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第391页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第392页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第393页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第394页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第395页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第396页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第397页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第398页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第399页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第400页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第401页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第402页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第403页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第404页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第405页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第406页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第407页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第408页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第409页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第410页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第411页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第412页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第413页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第414页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第415页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第416页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第417页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第418页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第419页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第420页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第421页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第422页,共597页


273357673.xlsx 文档密级:

Read & Write No (And no impact on the UE in idle mode) N/A

06/12/2015 华为机密,未经许可不得扩散 第423页,共597页


273357673.xlsx 文档密级:

Interruption Duration (min) Caution Validation of Modification

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第424页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第425页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第426页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第427页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第428页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第429页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第430页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第431页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第432页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第433页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第434页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第435页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第436页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第437页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第438页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第439页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第440页,共597页


273357673.xlsx 文档密级:

N/A None N/A

06/12/2015 华为机密,未经许可不得扩散 第441页,共597页


273357673.xlsx 文档密级:

N/A None N/A

06/12/2015 华为机密,未经许可不得扩散 第442页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第443页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第444页,共597页


273357673.xlsx 文档密级:

N/A None N/A

06/12/2015 华为机密,未经许可不得扩散 第445页,共597页


273357673.xlsx 文档密级:

N/A None N/A

06/12/2015 华为机密,未经许可不得扩散 第446页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第447页,共597页


273357673.xlsx 文档密级:

N/A None N/A

06/12/2015 华为机密,未经许可不得扩散 第448页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第449页,共597页


273357673.xlsx 文档密级:

If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
N/A value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.

06/12/2015 华为机密,未经许可不得扩散 第450页,共597页


273357673.xlsx 文档密级:

If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
N/A value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.

06/12/2015 华为机密,未经许可不得扩散 第451页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第452页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第453页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第454页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第455页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第456页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第457页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第458页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第459页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第460页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第461页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第462页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第463页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第464页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第465页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第466页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第467页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第468页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第469页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第470页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第471页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第472页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第473页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第474页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第475页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第476页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第477页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第478页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第479页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第480页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第481页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第482页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第483页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第484页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第485页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第486页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第487页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第488页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第489页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第490页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第491页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第492页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第493页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第494页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第495页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第496页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第497页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第498页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第499页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第500页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第501页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第502页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第503页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第504页,共597页


273357673.xlsx 文档密级:

The parameter modification has


N/A None
no impact on the equipment.

06/12/2015 华为机密,未经许可不得扩散 第505页,共597页


273357673.xlsx 文档密级:

Impact on Radio Network Performance Introduced in Version… Attribute

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
BSC6910 V100R015C00 Radio
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015 华为机密,未经许可不得扩散 第506页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015 华为机密,未经许可不得扩散 第507页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
BSC6910 V100R015C00 Radio
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015 华为机密,未经许可不得扩散 第508页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第509页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第510页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops or more handovers. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
congestion occurs in macro cells.

06/12/2015 华为机密,未经许可不得扩散 第511页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


congestion occurs in macro cells.
If this parameter is set to a small value, BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, causing call drops or more handovers.

06/12/2015 华为机密,未经许可不得扩散 第512页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第513页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第514页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015 华为机密,未经许可不得扩散 第515页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第516页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015 华为机密,未经许可不得扩散 第517页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value, BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, causing call drops.

06/12/2015 华为机密,未经许可不得扩散 第518页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES, sufficient idle


TCHFs are ensured, but the number of intra-cell
BSC6910 V100R015C00 Radio
handovers increases. If this parameter is set to
NO, radio network performance is not affected.

If this parameter is set to a small value, MSs are


unlikely to hand over to the cell by performing
inter-layer load-based handovers. If this
BSC6910 V100R015C00 Radio
parameter is set to a large value, MSs are likely
to hand over to the cell by performing inter-layer
load-based handovers.

06/12/2015 华为机密,未经许可不得扩散 第519页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
handovers are performed frequently.

06/12/2015 华为机密,未经许可不得扩散 第520页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value, intra-cell


handover penalties become ineffective, causing
frequent handovers.
If this parameter is set to a large value, intra-cell BSC6910 V100R015C00 Radio
handover penalties are performed frequently. As a
result, handovers cannot be performed in a timely
manner, causing call drops.

06/12/2015 华为机密,未经许可不得扩散 第521页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第522页,共597页


273357673.xlsx 文档密级:

The smaller the value of this parameter, the


smaller the number of downlink interference
handovers. The larger the value of this parameter, BSC6910 V100R015C00 Radio
the larger the number of downlink interference
handovers.

06/12/2015 华为机密,未经许可不得扩散 第523页,共597页


273357673.xlsx 文档密级:

The smaller the value of this parameter, the larger


the number of downlink interference handovers.
BSC6910 V100R015C00 Radio
The larger the value of this parameter, the smaller
the number of downlink interference handovers.

06/12/2015 华为机密,未经许可不得扩散 第524页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第525页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第526页,共597页


273357673.xlsx 文档密级:

The smaller the value of this parameter, the


smaller the number of uplink interference
handovers. The larger the value of this parameter, BSC6910 V100R015C00 Radio
the larger the number of uplink interference
handovers.

06/12/2015 华为机密,未经许可不得扩散 第527页,共597页


273357673.xlsx 文档密级:

The smaller the value of this parameter, the larger


the number of uplink interference handovers. The
BSC6910 V100R015C00 Radio
larger the value of this parameter, the smaller the
number of uplink interference handovers.

06/12/2015 华为机密,未经许可不得扩散 第528页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第529页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES(Yes), underlaid


and overlaid subcells use their own interference
handover offsets to control the impact of BSC6910 V100R015C00 Radio
interference handovers on the handover success
rate and call drop rate.

06/12/2015 华为机密,未经许可不得扩散 第530页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES(Yes), the TCH


congestion rate and the number of ping-pong
handovers decrease when intra-BSC load-based
BSC6910 V100R015C00 Radio
handovers occur. If this parameter is set to
NO(No), radio network performance is not
affected.

06/12/2015 华为机密,未经许可不得扩散 第531页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第532页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第533页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value,


handovers are not performed in a timely manner,
leading to call drops or deteriorating the speech BSC6910 V100R015C00 Radio
quality. If this parameter is set to a large value,
unnecessary handovers are performed.

06/12/2015 华为机密,未经许可不得扩散 第534页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value, the inter-


layer load-based handover is likely to trigger in
the serving cell and MSs are likely to hand over to
BSC6910 V100R015C00 Radio
a neighboring cell of a low layer. If this parameter
is set to a large value, the inter-layer load-based
handover is unlikely to trigger in the serving cell.

06/12/2015 华为机密,未经许可不得扩散 第535页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第536页,共597页


273357673.xlsx 文档密级:

If this switch is turned on, AMR FR calls can be


switched into AMR HR calls to relieve the network
congestion, but the number of handovers
increases and the voice quality deteriorates; if this
BSC6910 V100R015C00 Radio
switch is turned off, AMR FR calls cannot be
switched into AMR HR calls, that is, network
congestion cannot be relieved through the
handover from TCHF to TCHH.

06/12/2015 华为机密,未经许可不得扩散 第537页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the BSC6910 V100R015C00 Radio
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015 华为机密,未经许可不得扩散 第538页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, the network congestion
cannot be relieved in a timely manner. BSC6910 V100R015C00 Radio
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015 华为机密,未经许可不得扩散 第539页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the BSC6910 V100R015C00 Radio
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015 华为机密,未经许可不得扩散 第540页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, MSs at


the edge of the cell can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, only MSs BSC6910 V100R015C00 Radio
in the center of the cell can meet the handover
condition. therefore, the network congestion
cannot be relieved in time.

06/12/2015 华为机密,未经许可不得扩散 第541页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, MSs with


poor quality can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, little MSs BSC6910 V100R015C00 Radio
can meet the handover condition. Therefore,
network congestion cannot be relieved in a timely
manner.

If this parameter is set to a large value, calls


cannot be handed over to TCHHs in a short
period when the traffic volume is increased
greatly. Therefore, network congestion cannot be
BSC6910 V100R015C00 Radio
relieved in a timely manner. If this parameter is
set to a small value, calls are handed over to
TCHHs unnecessarily, causing MOS loss of the
customer.

06/12/2015 华为机密,未经许可不得扩散 第542页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第543页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only MSs


in the center of the cell use the TCHHs, leading to
a waste of timeslots and network congestion
cannot be relieved in a timely manner. If this
BSC6910 V100R015C00 Radio
parameter is set to a small value, MSs at the
edge of the cell and with poor quality also cannot
be handed over to TCHFs, deteriorating the voice
quality.

06/12/2015 华为机密,未经许可不得扩散 第544页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, MSs at


the edge of the cell and with poor quality also
cannot be handed over to TCHFs, deteriorating
the voice quality. If this parameter is set to a small
BSC6910 V100R015C00 Radio
value, only MSs in the center of the cell use
TCHHs, leading to a waste of timeslots and
network congestion cannot be relieved in a timely
manner.

06/12/2015 华为机密,未经许可不得扩散 第545页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第546页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be triggered even if the receive
signal quality is poor, deteriorating the voice
quality.
BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
handovers are triggered when the receive signal
quality is favorable. Therefore, congestion is
difficult to relieve.

06/12/2015 华为机密,未经许可不得扩散 第547页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value, there are


half-rate calls when load is light, decreasing the
MOS value unnecessarily. If this parameter is set BSC6910 V100R015C00 Radio
to a large value, HR-to-FR handovers occur when
load is heavy, causing congestion.

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第548页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES(Yes), the BSC


triggers a handover for an MS with low receive
level in a timely manner, decreasing the call drop BSC6910 V100R015C00 Radio
rate. If this parameter is set to NO(No), wireless
performance does not deteriorate.

06/12/2015 华为机密,未经许可不得扩散 第549页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
BSC6910 V100R015C00 Radio
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015 华为机密,未经许可不得扩散 第550页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

The smaller the value of this parameter, the


poorer the voice quality.
BSC6910 V100R015C00 Radio
The larger the value of this parameter, the more
difficult the congestion to relieve.

06/12/2015 华为机密,未经许可不得扩散 第551页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value, the


duration of an AMR TCHF-TCHH handover is
short after the handover is triggered. Therefore,
few MSs can be handed over from TCHFs to
TCHHs, and the congestion relieving capability
decreases.
BSC6910 V100R015C00 Radio
If this parameter is set to a large value, the
duration of an AMR TCHF-TCHH handover is
long after the handover is triggered. Therefore,
the MSs on the edge of the cell are handed over
from TCHFs to TCHHs, deteriorating the voice
quality.

06/12/2015 华为机密,未经许可不得扩散 第552页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing congestion. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
unnecessary handovers are triggered.

If this parameter is set to a large value,


handovers cannot be performed in a timely
BSC6910 V100R015C00 Radio
manner, causing congestion. If this parameter is
set to a small value, the voice quality deteriorates.

06/12/2015 华为机密,未经许可不得扩散 第553页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a small value, the


handover zone is enlarged in a short time, and
therefore many MSs are handed over from
TCHFs to TCHHs.
If this parameter is set to a large value, the BSC6910 V100R015C00 Radio
handover zone is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover.
Therefore, and the congestion relieving capability
decreases.

06/12/2015 华为机密,未经许可不得扩散 第554页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value, BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, causing congestion.

06/12/2015 华为机密,未经许可不得扩散 第555页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第556页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only an


MS close to the overlaid subcell can be assigned
TCHHs. Therefore, timeslots are wasted.
If this parameter is set to a small value, an MS of
BSC6910 V100R015C00 Radio
bad quality on the edge of the overlaid subcell
cannot be handed over from TCHH to TCHF.
Therefore, the voice quality of the call
deteriorates.

06/12/2015 华为机密,未经许可不得扩散 第557页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第558页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality. BSC6910 V100R015C00 Radio
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015 华为机密,未经许可不得扩散 第559页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only MSs


in the center area of the overlaid subcell can be
assigned TCHHs. Therefore, timeslots are wasted
and the congestion relieving capability decreases.
BSC6910 V100R015C00 Radio
If this parameter is set to a small value, MSs on
the edge of the overlaid subcell also use TCHHs.
Therefore, the voice quality of the call
deteriorates.

06/12/2015 华为机密,未经许可不得扩散 第560页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value, BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, affecting voice quality.

06/12/2015 华为机密,未经许可不得扩散 第561页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES(Yes), the number


of better cell handovers increases, but the
number of bad quality (BQ) handovers BSC6910 V100R015C00 Radio
decreases. If this parameter is set to NO(No),
radio network performance is not affected.

06/12/2015 华为机密,未经许可不得扩散 第562页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
BSC6910 V100R015C00 Radio
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015 华为机密,未经许可不得扩散 第563页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
BSC6910 V100R015C00 Radio
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015 华为机密,未经许可不得扩散 第564页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第565页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES, intra-cell load-


based TCHF-TCHH handover is controlled
BSC6910 V100R015C00 Radio
accurately to avoid ping-pong handovers arising
from intra-cell load adjustment.

06/12/2015 华为机密,未经许可不得扩散 第566页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第567页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES, FR calls can be


switched into HR calls to relieve the network
congestion, but the number of handovers
increases and the voice quality deteriorates; if this
BSC6910 V100R015C00 Radio
parameter is set to NO, FR calls cannot be
switched into HR calls, that is, network
congestion cannot be relieved through the
handover from TCHF to TCHH.

06/12/2015 华为机密,未经许可不得扩散 第568页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the BSC6910 V100R015C00 Radio
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015 华为机密,未经许可不得扩散 第569页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, network congestion cannot
be relieved in a timely manner. BSC6910 V100R015C00 Radio
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015 华为机密,未经许可不得扩散 第570页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the BSC6910 V100R015C00 Radio
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015 华为机密,未经许可不得扩散 第571页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, network congestion cannot
be relieved in a timely manner. BSC6910 V100R015C00 Radio
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015 华为机密,未经许可不得扩散 第572页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, MSs with


poor quality can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, little MSs BSC6910 V100R015C00 Radio
can meet the handover condition. Therefore,
network congestion cannot be relieved in a timely
manner.

06/12/2015 华为机密,未经许可不得扩散 第573页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, calls


cannot be handed over to TCHHs in a short
period when the traffic volume is increased
greatly. Therefore, network congestion cannot be
BSC6910 V100R015C00 Radio
relieved in a timely manner. If this parameter is
set to a small value, calls are handed over to
TCHHs unnecessarily, causing MOS loss of the
customer.

06/12/2015 华为机密,未经许可不得扩散 第574页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

If this parameter is set to a large value, only MSs


in the center of the cell use TCHHs, leading to a
waste of timeslots and network congestion cannot
be relieved in a timely manner. If this parameter is BSC6910 V100R015C00 Radio
set to a small value, MSs at the edge of the cell
and with poor quality also cannot be handed over
to the TCHF, deteriorating the voice quality.

06/12/2015 华为机密,未经许可不得扩散 第575页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, MSs at


the edge of the cell and with poor quality also
cannot be handed over to the TCHFs,
deteriorating the voice quality. If this parameter is
BSC6910 V100R015C00 Radio
set to a small value, only MSs in the center of the
cell use TCHHs, leading to a waste of timeslots
and the network congestion cannot be relieved in
a timely manner.

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第576页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, handover


cannot be triggered even when the quality is poor,
deteriorating the voice quality. If this parameter is
BSC6910 V100R015C00 Radio
set to a small value, handover is triggered even
when the quality is favorable. As a result, network
congestion cannot be relieved in a timely manner.

06/12/2015 华为机密,未经许可不得扩散 第577页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


handovers can be triggered when the network is
overloaded, causing congestion.
BSC6910 V100R015C00 Radio
If this parameter is set to a small value, there are
half-rate calls when the network load is low,
decreasing the mean opinion score (MOS).

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第578页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, handover


cannot be performed when the uplink voice
quality is poor, leading to call drops. If this
BSC6910 V100R015C00 Radio
parameter is set to a small value, unnecessary
handovers are performed, deteriorating the voice
quality.

If this parameter is set to YES(Yes), in a scenario


where downlink measurement reports are lost
continuously, handovers due to quality problems
are triggered more quickly, the number of BSC6910 V100R015C00 Radio
handovers increases, and the call drop rate
decreases. If this parameter is set to NO(No),
radio network performance is not affected.

06/12/2015 华为机密,未经许可不得扩散 第579页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value and if


interference is strong after handovers are
successful, call drops occur. If this parameter is BSC6910 V100R015C00 Radio
set to a small value, handovers are performed
frequently, increasing the signaling load.

If this parameter is set to a large value, the MS is


unlikely to be handed over back to the source
cell, leading to call drops due to no suitable
neighboring cells. BSC6910 V100R015C00 Radio
If this parameter is set to a small value, the MS is
likely to be handed over back to the source cell,
leading to ping-pong handovers.

06/12/2015 华为机密,未经许可不得扩散 第580页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value, the MS is


unlikely to be handed over back to the source
cell, leading to call drops due to no suitable
neighboring cells. BSC6910 V100R015C00 Radio
If this parameter is set to a small value, the MS is
likely to be handed over back to the source cell,
leading to ping-pong handovers.

06/12/2015 华为机密,未经许可不得扩散 第581页,共597页


273357673.xlsx 文档密级:

If this parameter is set to ON the possibility of


ping-pong effect is reduced when load-based
BSC6910 V100R015C00 Radio
handovers and other types of handovers are
performed.

06/12/2015 华为机密,未经许可不得扩散 第582页,共597页


273357673.xlsx 文档密级:

The value of this parameter should be smaller


than "NCELLFLTLEN" because the signaling
BSC6910 V100R015C00 Radio
channel seizure duration is shorter than the traffic
channel seizure duration for the MS.

06/12/2015 华为机密,未经许可不得扩散 第583页,共597页


273357673.xlsx 文档密级:

None BSC6910 V100R015C00 Radio

06/12/2015 华为机密,未经许可不得扩散 第584页,共597页


273357673.xlsx 文档密级:

If this parameter is set to a large value,


congestion in the underlaid subcell is difficult to
relieve;If this parameter is set to a small value, a
large number of calls are handed over from the BSC6910 V100R015C00 Radio
underlaid subcell to the overlaid subcell
simultaneously, causing congestion in the
overlaid subcell and handover failures.

06/12/2015 华为机密,未经许可不得扩散 第585页,共597页


273357673.xlsx 文档密级:

Setting this parameter to TCHMAXPOWER


decreases the call drop rate for MSs in the
BSC6910 V100R016C00 Radio
overlaid subcell and the number of overlaid-to-
underlaid handovers.

06/12/2015 华为机密,未经许可不得扩散 第586页,共597页


273357673.xlsx 文档密级:

If this parameter is set to YES, intra-cell load-


based handovers between overlaid and underlaid
BSC6910 V100R015C00 Radio
subcells are precisely controlled to avoid ping-
pong handovers due to intra-cell load adjustment.

06/12/2015 华为机密,未经许可不得扩散 第587页,共597页


MO Parameter ID Parameter Name
G2GNCELL BETTERCELLLASTTIME Better Cell HO Valid Time
G2GNCELL BETTERCELLSTATTIME Better Cell HO Watch Time
G2GNCELL BQLASTTIME BQ HO Valid Time
G2GNCELL BQSTATTIME BQ HO Watch Time
G2GNCELL DRHOLEVRANGE Directed Retry Handover Level Rang
G2GNCELL EDOUTHOOFFSET Enhanced Outgoing Cell Handover O
G2GNCELL HCSLASTTIME HCS HO Valid Time
G2GNCELL HCSSTATTIME HCS HO Watch Time
G2GNCELL TALASTTIME TA HO Valid Time
G2GNCELL TASTATTIME TA HO Watch Time
G2GNCELL ULBQLASTTIME UL BQ HO Last Time
G2GNCELL ULBQSTATTIME UL BQ HO Static Time

GCELLCHMGHALFRATEREPACKINGSWITCH TCHH Integration

GCELLHOADACCTHRESLAYER Inter-Layer Load HO Access Thresho


GCELLHOADINTERFEREDLEVOFF DLevOffset for Interfere HO
GCELLHOADINTERFEREDLEVOFFOL OL DL Level Offset for Interference
GCELLHOADINTERFEREDLQUALOFFOL OL DL Quality Offset for Interferenc
GCELLHOADINTERFEREDQUALOFF DQualOffset for Interfere HO
GCELLHOADINTERFEREULEVOFF ULevOffset for Interfere HO
GCELLHOADINTERFEREULEVOFFOL OL UL Level Offset for Interference
GCELLHOADINTERFEREULQUALOFFOL OL UL Quality Offset for Interferenc
GCELLHOADINTERFEREUQUALOFF UQualOffset for Interfere HO
GCELLHOADINTERFEROFFSWITCHOL OL Offset for Interference HO
GCELLHOADLOADHOHYSTADAPEN Cell Edge Shrink Based on Load
GCELLHOADTRIGTHRESLAYER Inter-Layer Load HO Start Threshold
GCELLHOBABETTERCELLHOEN Better Cell Handover Enable
GCELLHOBAEDGEHOHYSTEN Low Hysteresis Allowed for Edge HO
GCELLHOBAEDGELAST Handover Algorithm II Edge HO Vali
GCELLHOBAEDGESTAT Handover Algorithm II Edge HO Wat
GCELLHOBAHOPRIOMODEN HO Priority Adjustment
GCELLHOBAINTERFERELASTTIME Interfere HO Valid Time
GCELLHOBAINTERFERESTATTIME Interfere HO Static Time
GCELLHOBAINTRACELLFHOPTSWITCH Intra-cell F/H Load Control Optimizat
GCELLHOBAPATHLOSSHOEN Pathloss Ho. Enable
GCELLHOEMULQUALIMIT UL Qual. Threshold
GCELLHOFITINITUPFILEN Initial Increment Filtering Allowed
GCELLHOFITINTERFEREHOPENTIME Penalty Time on Interfere HO
GCELLHOFITLOADHOPENTIME Penalty Time on Load HO
GCELLHOFITLOADHOPENVALUE Penalty Value on Load HO
GCELLHOFITLoadHoPunishInheritSwitch Load HO Penalty Optimization
GCELLHOFITNSIGSTRFLTLEN NCell Filter Length for SDCCH Level
GCELLHOFITTASIGSTRFLTLEN TA Filter Length for SDCCH Level
GCELLHOIU ENUTOOLOADINILEV IniLev for EnUtoO Load HO
GCELLHOIU IUOOlPowerCompPolicy Overlaid Level Power Compensate Po
GCELLHOIU UOLOADOPTSWITCH OL/UL Load Control Optimization
NE MML Command Meaning IsKey Mandatory Feature ID Feature Name Value Type
ADD G2GNCELL
BSC6910 Period during NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
ADD G2GNCELL
BSC6910 Period during NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
ADD G2GNCELL
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurem
BSC6910 NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
This
ADD G2GNCELL parameter
According to thespecifies
P/N rule,the number
if the P. for emergency BQ handover are met in P of N measurem
conditions
BSC6910 NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
This parameter specifies the number N. GBFD-110601HUAWEI I Handover
ADD G2GNCELL
BSC6910 Difference bet NO NO
Uplink receive level of the serving cell after power control compensation Interval Typeof "ULEDGETHRES
< Value
MOD G2GNCELL
ADD G2GNCELL GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 Downlink receiveNO level of the
NO serving cell after power control compensation
Interval<Type
Value of "DLEDGETHR
MOD G2GNCELL
ADD G2GNCELL
According toofthe P/N rule, GBFD-510501
if the conditions HUAWEI
forhandovers
the handover to a IIdifferent
Handover micro cell
BSC6910 In the case Huawei
NO handover
NO algorithm II, to a better neighboring
GBFD-51050 HUAWEI II HaInterval Type cell due to fast
can be move
triggered
MOD G2GNCELL
This
ADD G2GNCELL parameter
According to thespecifies
P/N rule,the number
if the P. for the handover to a different micro cell due to fast move
conditions
BSC6910 NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
This parameter specifies the number N.
ADD G2GNCELL
BSC6910 The P/N crite NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
ADD G2GNCELL
BSC6910 The P/N crite NO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
ADD G2GNCELL
BSC6910 Period duringNO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
ADD G2GNCELL
BSC6910 Period duringNO NO GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL

GBFD-113402Dynamic Adjustment Between FR and HR


BSC6910 SET GCELL Whether to coNO NO Enumeration
GBFD-115504AMR FR/HR Dynamic Adjustment

BSC6910 SET GCELL This parameter


"RXQUALn" NO
(1 <= n <= 12):NO GBFD-51050
used for non-AMR HUAWEI II HaInterval Type
FR calls.
BSC6910 SET GCELL The receive quality
NO equals the NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand II Hathe
Interval
corresponding
Type quality offset
2 <= n <= 12 GBFD-113201Concentric Cell
BSC6910 SET GCELL Downlink receNO NO Interval Type
Downlink receive quality threshold offset GBFD-510501
GBFD-113201 HUAWEI
for overlaid subcells in II
Concentric Handover
a Cell
concentric cell during the interfere
BSC6910 SET GCELL "RXQUALn" NO
(1 <= n <= 12):IINOused forand
non-AMR FR calls. Interval Type
When handover algorithm is used GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover is set to YES(Yes), the downl
BSC6910 SET GCELL The receive quality
"RXQUALn" NO
(1 <= nequals
<= 12):the
NO sumforofnon-AMR
used theGBFD-51050
value FR
of "RXQUALn"
HUAWEIand
calls. II Hathe
Interval
corresponding
Type quality offset
BSC6910 SET GCELL 2 <=receive
The n <= 12quality
NO equals the NO sum of theGBFD-51050 HUAWEIand
value of "RXQUALn" II Hathe
Interval Type
corresponding quality offset
Uplink
2 <= n receive
<= 12 NO level offset for overlaid subcells
GBFD-113201
in a concentric
Concentric
cell Cell
during the interference handover d
BSC6910 SET GCELL NO Interval Type
When
Uplink handover algorithm
receive quality II is used
threshold offsetand
forGBFD-510501
"INTERFEROFFSWITCHOL"
GBFD-113201 HUAWEI
overlaid subcells
ConcentricII Cell
Handover
in a concentric is set
celltoduring
YES(Yes), the uplink
the interference
BSC6910 SET GCELL "RXQUALn" NO
(1 <= NO
n <= 12):II used forand
non-AMR FR calls. Interval Type
When handover algorithm is used GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover is set to YES(Yes), the uplink
BSC6910 SET GCELL The receive quality
NO equals the NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand II Hathe
Interval
corresponding
Type quality offset
2 <= n <= 12
GBFD-113201Concentric Cell
BSC6910 SET GCELL Whether to usNO NO Enumeration
GBFD-510501HUAWEI II Handover
BSC6910 SET GCELL Whether to adj NO NO GBFD-51050 HUAWEI II HaEnumeration
BSC6910 SET GCELL Triggering thr NO NO GBFD-51050 HUAWEI II HaInterval Type
BSC6910 SET GCELLHWhether
When thistoparameter
enaNO is set NO
to YES: GBFD-51050 HUAWEI II HaEnumeration
BSC6910 SET GCELLHFor an MS with NOlow receiveNO GBFD-51050
level, the receive HUAWEI
level of the II HaEnumeration
neighboring cell must be greater than or eq
According to the P/N rule,is setifNO
the conditions for edge handover are met in P of N measurement report
BSC6910 SET GCELLHWhen this parameter
NO to NO: GBFD-51050 HUAWEI II HaInterval Type
This parameter
According to thespecifies
P/N rule,the number
if the P. for edge handover are met in P of N measurement report
conditions
BSC6910 SET GCELLH NO NO GBFD-51050 HUAWEI II HaInterval Type
This parameter specifies the number N.
BSC6910 SET GCELLHWhether to adj NO NO GBFD-51050 HUAWEI II HaEnumeration
BSC6910 SET GCELLHThe triggeringNO NO GBFD-51050 HUAWEI II HaInterval Type
BSC6910 SET GCELLHThe triggeringNO NO GBFD-51050 HUAWEI II HaInterval Type
BSC6910 SET GCELLHWhether to opNO NO GBFD-51050 HUAWEI II HaEnumeration
BSC6910 SET GCELLHWhether to per NO NO GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
BSC6910 SET GCELL An emergencyNO h NO Interval Type
GBFD-510501HUAWEI II Handover
BSC6910 SET GCELLHWhether the in NO NO GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
BSC6910 SET GCELLHPeriod in whicNO NO Interval Type
GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 SET GCELLHAfter a load NO NO Interval Type
GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 SET GCELLHAfter a load NO NO Interval Type
GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 SET GCELLHWhether to ena NO NO Enumeration
GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 SET GCELLHFor the purpos NO NO Interval Type
GBFD-510501
GBFD-110601HUAWEI
HUAWEI II Handover
I Handover
BSC6910 SET GCELLHWhen the netw NO NO Interval Type
GBFD-510501HUAWEI II Handover
BSC6910 SET GCELLHInitial signal NO NO GBFD-11320 Concentric CeInterval Type
BSC6910 SET GCELLHLevel compens NO NO GBFD-11320 Concentric CeEnumeration
BSC6910 SET GCELLHWhether to opNO NO GBFD-11320 Concentric CeEnumeration
GUI Value
Enumeration
Range Number/Bit
Unit Actual Value Range
Default Value
Recommended
Initial
Value Value SourceImpact
1~32 N/A 480ms 480~15360 4 4 Radio Planning
Cell
1~32 N/A 480ms 480~15360 6 6 Radio Planning
Cell
1~16 N/A 470ms; 480m480~7680(TC 1 1 Radio Planning
Cell
1~16 N/A 470ms; 480m480~7680(TC 1 1 Radio Planning
Cell
0~128 N/A dB 0~128 72 72 Radio Planning
Cell
0~127 N/A None -64~63 64 64 Radio Planning
Cell
1~16 N/A 0.5s 0.5~8 2 2 Radio Planning
Cell
1~16 N/A 0.5s 0.5~8 3 3 Radio Planning
Cell
1~16 N/A 470ms; 480m480~7680(TC 1 1 Radio Planning
Cell
1~16 N/A 470ms; 480m480~7680(TC 1 1 Radio Planning
Cell
1~8 N/A 470ms; 480m480~3840(TC 1 1 Radio Planning
Cell
1~8 N/A 470ms; 480m480~3840(TC 1 1 Radio Planning
Cell

NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell

0~100 N/A None 0~100 100 100 Radio Planning


Cell
-30~30 N/A dB -30~30 0 0 Radio Planning
Cell
-30~30 N/A dB -30~30 0 0 Default/Reco Cell
-30~30 N/A dB -30~30 10 10 Default/Reco Cell
-30~30 N/A dB -30~30 0 0 Radio Planning
Cell
-30~30 N/A dB -30~30 0 0 Radio Planning
Cell
-30~30 N/A dB -30~30 -10 -10 Default/Reco Cell
-30~30 N/A dB -30~30 0 0 Default/Reco Cell
-30~30 N/A dB -30~30 0 0 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
0~100 N/A None 0~100 0 0 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES YES(Yes) YES(Yes) Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
1~32 N/A 470ms; 480m480~15360(T 1 1 Radio Planning
Cell
1~32 N/A 470ms; 480m480~15360(T 1 1 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
1~16 N/A 470ms; 480m480~7680(TC 2 2 Radio Planning
Cell
1~16 N/A 470ms; 480m480~7680(TC 3 3 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Radio Planning
Cell
0~70 N/A None 0~70 55 55 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
0~255 N/A s 0~255 15 15 Radio Planning
Cell
0~255 N/A s 0~255 10 10 Radio Planning
Cell
0~63 N/A dB 0~63 63 63 Radio Planning
Cell
OFF(Off), ONOFF~0, ON~1None OFF, ON OFF(Off) OFF(Off) Engineering Cell
1~31 N/A 470ms; 480m480~14880(T 2 2 Radio Planning
Cell
1~31 N/A 470ms; 480m480~14880(T 2 2 Radio Planning
Cell
0~63 N/A dB 0~63 63 63 Radio Planning
Cell
TCHMAXPOWER TCHMAXPOW None TCHMAXPOW ULBCCHPOWER ULBCCHPOWER Default/Reco Cell
NO(No), YES(NO~0, YES~1None NO, YES NO(No) NO(No) Default/Reco Cell
Parameter Relationship
Service
This parameter Access
is validInterrupted After
Interruption
Modification
Interruption
only when [G2GNCELL:NCELLTYPE] Scope Duration
is set to(min)
Caution
Validation
Impact
of Modification
on Radio Network
HANDOVERANDIBCANCELL, Performance
HANDOVERNCELL.
If this parameter is set to a large
The parameter
Read
will be
& WriteNo
set with (And
NULL no
when
imN/A
it is invalid. N/A None
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL, The parameter HANDOVERNCELL.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The parameter
Read
will be
& WriteNo
set with (And
NULL no
when
imN/A
it is invalid. N/A None The parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL, If HANDOVERNCELL.
-Others: If this parameter is set to a smal
this parameter is set to a large
The Read
This parameter
parameter will & WriteNo
be
is valid set with
only when(And
NULL no imN/A
when it is invalid. N/A
[G2GNCELL:NCELLTYPE] None
is set to The parameter
HANDOVERANDIBCANCELL, HANDOVERNCELL.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The Read
parameter will &
be WriteNo
set with (And
NULL no im
whenN/A
it is invalid. N/A None The parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL, HANDOVERNCELL.
If this parameter is set to a smal
-Others:
The parameter
Read
will be
& WriteNo
set with (And
NULLnowhen
imN/A
it is invalid. N/A None The parameterNone
The parameter will be set with NULL when it is invalid.
-Others:
The Read
parameter & WriteNo
will be set with (And
NULLno imN/A
when it is invalid. N/A None The parameterNone
-Others: If this parameter is set to a large
-Others:
The parameterRead & WriteNo
will be set with (And
NULLno imN/A
when it is invalid. N/A None The parameter
If
If this
this parameter
parameter is
is set
set to a
a smal
This parameter
-Others: is valid
Read & only if [GCELLHOBASIC:HOCTRLSWITCH]
WriteNo (And no imN/A N/A is set to HOALGORITHM2(Handover
None The parameter algorithm II)toandlarge
[GC
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL, If this HANDOVERNCELL.
parameter is set to a smal
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] If this
is set to HOALGORITHM2(Handover parameter is set to a large
algorithm II) and [GC
The parameter
This Read
parameter will & WriteNo
be
is valid set with
only when(And
NULL no imN/A
when it is invalid. N/A
[G2GNCELL:NCELLTYPE] None
is set to The parameter
HANDOVERANDIBCANCELL, HANDOVERNCELL.
If this parameter is set to a smal
-Others: Read & WriteNo
The
The parameter
parameter will
will be
be set with (And
set with NULLno
NULL imN/A
when
when itit is invalid. N/A
is invalid. None The parameterNone
-Others: If this parameter is set to a large
-Others:
The parameterRead & WriteNo
will be set with (And
NULLno imN/A
when it is invalid. N/A None The parameter
If
If this
this parameter
parameter is
is set
set to a
a smal
This parameter
-Others: is valid
Read only if [GCELLHOBASIC:HOCTRLSWITCH]
& WriteNo (And no imN/A N/A is set to HOALGORITHM2(Handover
None The parameter algorithm II)toandlarge
[GC
If this parameter is set to a smal
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC

-Others:
This
parameter is
valid only if
[GCELLHOB
ASIC:INTRA
CELLHOEN]
is set to
YES(Yes),
[GCELLHOB
ASIC:HOCT Read & WriteNo (And no imN/A N/A None The parameter
If this parame
RLSWITCH]
is set to
HOALGORI
THM2, and
[GCELLCH
MGAD:TCH
LOADOPTS
WITCH] is
set to
ON(On).

-Others:
-Others: Read & WriteNo (And no imN/A N/A None The parameter
If this parame
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A N/A None
is set to HOALGORITHM2(Handover
The parameter
None algorithm II) and [G
-Others:
2. This parameter is used with "RXQUALn" to determine the interference handover threshold.
Read & WriteNo (And no imN/A N/A None N/A The smaller th
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
-Others:
-Others: Read & WriteNo (And no imN/A N/A None N/A The smaller th
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
1. This parameter
-Others: Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A N/A None
is set to HOALGORITHM2(Handover
The parameter
None algorithm II) and [G
2.
1. This
This parameter
Readis
parameter is&used
valid with if(And
WriteNo
only "RXQUALn"
no imN/Ato determine
N/Athe interference
[GCELLHOBASIC:HOCTRLSWITCH] None handover
is set threshold.
The parameter
None
to HOALGORITHM2(Handover algorithm II) and [G
-Others:
2. This parameter is used with "RXQUALn" to determine the interference handover threshold.
Read & WriteNo (And no imN/A N/A None N/A The smaller th
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
-Others: Read & WriteNo (And no imN/A N/A None N/A The smaller th
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A N/A None
is set to HOALGORITHM2(Handover
The parameter
None algorithm II) and [G
2. This parameter is used with "RXQUALn" to determine the interference handover threshold.
-Others:
Read & WriteNo (And no imN/A N/A None N/A If this parame
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] set to HOALGORITHM2 and [GCELLHOBASIC:INTERFHO
-Others:
Read & WriteNo (And no imN/A N/A None The parameter
If this param
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
-Parameter Read & WriteNo
relationship (And no imN/A
withifconditions: N/A None The parameter
If this parame
This parameter is valid only [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
Read
This parameter & WriteNo
is valid only when (And no imN/A
[GCELLHOBASIC:HOCTRLSWITCH]N/A Noneis set to HOALGORITHM2.
The parameter
None
-Others:
The parameter will be set with NULL when it is invalid.
Read
This parameter
parameter & WriteNo
is valid
valid (And
only ifwhen no imN/A
[GCELLHOBASIC:HOCTRLSWITCH]N/A Noneis set to HOALGORITHM2.
The parameter
If this parame
This is only [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2.If this parameter is set to a large
The parameter
Read
will be
& WriteNo
set with (And
NULL no
when
im N/Ait is invalid. N/A None
This parameter is valid only when [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2. The parameter
If
If this
this parameter
parameter is is set
set to
to a
a smal
large
-Others:
The parameterRead
will be
& WriteNo
set with (And
NULLno when
imN/A it is invalid. N/A None The parameter
-Others: If this parameter is set to a smal
-Others: Read & WriteNo (And no imN/A N/A Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter
This parameter is valid
is valid only ifwhen
only [GCELLHOBASIC:HOCTRLSWITCH]
[GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
If this parameter is set to a large
The
This parameter
Read
parameter will be
& WriteNo
is validset with
only when(And
NULL no
when
imN/A it is invalid. N/A
[GCELLHOBASIC:HOCTRLSWITCH] Noneis set to HOALGORITHM2.
The parameter
If
If this
this parameter
parameter is is set
set to
to a
a smal
large
-Others:
The parameterRead & WriteNo
will be set with (And
NULLno imN/A
when it is invalid. N/A None The parameter
-Others: If this parameter is set to a smal
-Others: Read & WriteNo (And no imN/A N/A Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter is valid only when [GCELLHOBASIC:HOCTRLSWITCH]
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC
The parameter will be
Read set with (And
& WriteNo NULLno when
imN/A it is invalid. N/A None The parameter
None
-Others:
Read & WriteNo (And no imN/A N/A None The parameter
If this parame
This parameter is valid only if [GCELLHOBASIC:BQHOEN] is set to YES or [GCELLHOBASIC:HOCTRLSWITCH] is set to HOA
-Others:
This Read & WriteNo (And no im N/A N/A None The parameter
If this parame
This parameter
parameter is
is valid
valid only
only when [GCELLHOFITPEN:HOCTRLSWITCH]
if [GCELLHOBASIC:HOCTRLSWITCH] is set is
toset to HOALGORITHM2.
HOALGORITHM2(Handover algorithm II) and [GC
The
This parameter
parameter will
Read be
is validset with
& WriteNo
only whenNULL
(And when
no imN/A it is invalid. N/A
[GCELLHOFITPEN:HOCTRLSWITCH] None is set toThe parameter
If this parame
HOALGORITHM2.
-Others: If this parameter is set to a large
The
This parameter
parameter will
Read be
is validset with
& WriteNo
only whenNULL
(And when
no imN/A it is invalid. N/A
[GCELLHOFITPEN:HOCTRLSWITCH] None is set toThe parameter
HOALGORITHM2.
If
If this
this parameter
parameter is is set
set to
to a
a smal
large
-Others:
The parameter will be
Read set with (And
& WriteNo NULLno when
imN/A it is invalid. N/A None The parameter
-Others: If this parameter is set to a smal
This Read
parameter is & WriteNo
valid only when(And no imN/A N/A
[GCELLHOFITPEN:HOCTRLSWITCH] None is set toThe parameter
If this param
HOALGORITHM2.
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2 and [GCELLHOBASIC:LoadHo
The parameter
-Parameter will be
Read set with
& WriteNo
relationship with NULLno
(And
conditions:when
imN/A it is invalid. N/A None The parameter
The value of
-Others:
This
This parameter
Read
parameter is
is valid
& WriteNo
valid only
only when
when(And[GCELLHOFITPEN:HOCTRLSWITCH]
no imN/A
[GCELLHOIUO:HOCTRLSWITCH] N/A None is to
is set setHOALGORITHM2.
toThe
HOALGORITHM2.
parameter
None
The
The parameter will be set with NULL when it is invalid.
This parameter
Read
parameter will be
& WriteNo
is validset with
only (And
NULL
if all no
when
of the imN/A it is invalid.
following N/A are met: None
conditions The parameter
If this parame
-Others:
1. [GCELLPWRBASIC:PWRCTRLSW]
Read & WriteNo (And no im isN/A
set to PWR3N/A and [GCELLPWR3:PWRCTRLOPTIMIZEDEN]
None The parameter
Setting this
is set to YES.
-Others:
2. [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2.
Read & WriteNo (And no imN/A N/A None The parameter
If this parame
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC
Introduced in Version…
Attribute
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio

BSC6910 V1 Radio

BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio

Das könnte Ihnen auch gefallen