y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in
LTE, before it was only the FFD.
I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains. y network we just upgrade to R11, in this release the weblmt has the option to measure the RTWP in LTE, before it was only the FFD. I have one doubt, in UMTS is well known that the ideal RTWP value is around -104, -105; which is the ideal RTWP value in LTE?, I have seen LTE sites with RTWP values around -90 but i dont have any degradation, neither any customer complains.