Beruflich Dokumente
Kultur Dokumente
(V900R010C00)
2016-10-27
HUAWEI HSS9860 V900R010C00 PGW MML
Command Protocol Contents
Contents
HUAWEI HSS9860...........................................................................................................................1
PGW MML Command Protocol.....................................................................................................1
Huawei Technologies Co., Ltd...........................................................................................................1
Contents..............................................................................................................................................i
HUAWEI HSS9860 PGW MML Command Protocol...............................................................lii
HLR, provisioning system interface, protocol, MML, OMC.................................................lii
1 Change History..............................................................................................................................1
2 Overview.......................................................................................................................................15
2.1 System Description.......................................................................................................................................................15
2.2 Network Connection.....................................................................................................................................................16
2.3 Terms............................................................................................................................................................................16
5 Communication Protocol...........................................................................................................21
6 Command Syntax........................................................................................................................22
7 Command Output........................................................................................................................24
7.1 General Message Format (TCP Port 7777)..................................................................................................................24
Total count=1...................................................................................................................................28
There is together 1 report..............................................................................................................28
SUBID=subinfo..............................................................................................................................29
Total count=6...................................................................................................................................29
There is together 1 report..............................................................................................................29
STDPRIOR......................................................................................................................................29
Total count=2...................................................................................................................................29
There is together 1 report..............................................................................................................29
8 Key Parameters............................................................................................................................30
9 Summary of Commands.............................................................................................................31
9.1 Operator Login.............................................................................................................................................................31
Parameter Description:..................................................................................................................31
LGI: HLRSN=2, OPNAME="NKR", PWD="*****";.................................................................31
9.2 Operator Logout...........................................................................................................................................................32
9.3 Add a Subscriber Using the Template..........................................................................................................................32
Parameter Description:..................................................................................................................32
9.4 Delete a Subscriber.......................................................................................................................................................33
Parameter Description:..................................................................................................................34
RMV SUB: ISDN="13623456789", RMVKI=TRUE;.................................................................34
9.5 Query the Static Subscriber Data.................................................................................................................................34
Parameter Description:..................................................................................................................34
LST SUB: IMSI="955678112", DETAIL=TRUE;........................................................................35
"EPS Data"........................................................................................................................................42
"Dynamic Status Information For MME"..................................................................................43
"Dynamic Status Information For Non-3GPP".........................................................................45
Parameter Description:..................................................................................................................55
LST DYNSUB: ISDN="955678112", EPSFEATURELISTDETAIL=TRUE;..........................56
"Dynamic Status information For GPRS"..................................................................................58
"Dynamic Status Information For Non-3GPP".........................................................................64
"Short Message Dynamic data for GSM"..................................................................................64
"Short Message Dynamic data for GPRS".................................................................................64
"ShortMessage Center Information"...........................................................................................64
"ShortMessage Center Information of Line2"...........................................................................64
"ODB Supported Features For GSM".........................................................................................65
"ODB Supported Features For GPRS"........................................................................................65
"Unsupported TeleService Feature"............................................................................................65
"Unsupported Bearer service Feature"........................................................................................66
"Unsupported supplementary service Feature"........................................................................66
"Supported LCS "............................................................................................................................67
"Featured Service Supported Features"......................................................................................67
"AS Subscription to notifications Data"....................................................................................67
"Resend Information"....................................................................................................................68
9.7 Modify the Lock State of a Subscriber.........................................................................................................................69
Parameter Description:..................................................................................................................69
MOD LCK: IMSI="984519856312345",IC=TRUE,OC=FALSE;..............................................70
9.8 Query the Lock State of a Subscriber...........................................................................................................................71
Parameter Description:..................................................................................................................71
LST LCK: IMSI="984519856312345";...........................................................................................71
9.9 Modify the GPRS Lock State of a Subscriber..............................................................................................................71
Parameter Description:..................................................................................................................72
MOD GPRSLCK: IMSI="984519856312345",LOCK=TRUE;..................................................72
9.10 Query the GPRS Lock State of a Subscriber..............................................................................................................72
Parameter Description:..................................................................................................................72
LST GPRSLCK: IMSI="984519856312345";................................................................................73
9.11 Modify the SAB Lock State of a Subscriber..............................................................................................................73
Parameter Description:..................................................................................................................73
MOD SABLCK: IMSI="984519856312345",IC=TRUE,OC=FALSE;......................................74
9.12 Query the SAB Lock State of a Subscriber................................................................................................................74
Parameter Description:..................................................................................................................74
LST SABLCK: IMSI="984519856312345";...................................................................................74
9.13 Set a Subscriber with Multi-MSISDN........................................................................................................................75
Parameter Description:..................................................................................................................75
9.14 Modify the Subscriber IMSI.......................................................................................................................................76
Parameter Description:..................................................................................................................76
MOD IMSI: ISDN="9854670023", NEWIMSI="438320000247111";......................................77
9.15 Query the Subscriber IMSI.........................................................................................................................................77
Parameter Description:..................................................................................................................77
LST IMSI: ISDN="9854670023";...................................................................................................78
9.16 Modify the Subscriber MSISDN................................................................................................................................78
Parameter Description:..................................................................................................................78
MOD ISDN: ISDN="934567901", NEWISDN="9854670023";................................................78
9.17 Query the Subscriber MSISDN..................................................................................................................................79
Parameter Description:..................................................................................................................79
LST ISDN: IMSI="452323132423";...............................................................................................79
9.18 Modify the Telephony Service (TS11).......................................................................................................................81
Parameter Description:..................................................................................................................81
MOD TELE: IMSI="444441234567890", PROV=TRUE;...........................................................81
9.19 Modify the Short Message MT/PP Service(TS21).....................................................................................................82
Parameter Description:..................................................................................................................82
MOD SMSMT: IMSI="444441234567890", PROV=TRUE;.....................................................82
9.20 Modify the Short Message MO/PP Service (TS22)...................................................................................................82
Parameter Description:..................................................................................................................82
MOD SMSMO: IMSI="444441234567890", PROV=TRUE;.....................................................83
9.21 Modify the Alternate Speech and Facsimile Service Group 3 (TS61).......................................................................83
Parameter Description:..................................................................................................................83
MOD TS61: IMSI="444441234567890", PROV=TRUE;............................................................84
9.22 Modify the Automatic Facsimile Service Group 3 (TS62)........................................................................................84
Parameter Description:..................................................................................................................84
Parameter Description:..................................................................................................................85
LST TS: IMSI="444440123456789";..............................................................................................85
9.24 Modify the Bearer Service 20 (BS20)........................................................................................................................85
Parameter Description:..................................................................................................................85
MOD BS20: IMSI="444441234567890", PROV=TRUE;............................................................86
9.25 Modify the Bearer Service 21 (BS21)........................................................................................................................86
Parameter Description:..................................................................................................................86
MOD BS21: IMSI="444441234567890", PROV=TRUE;............................................................86
9.26 Modify the Bearer Service 22 (BS22)........................................................................................................................87
Parameter Description:..................................................................................................................87
MOD BS22: IMSI="444441234567890", PROV=TRUE;............................................................87
9.27 Modify the Bearer Service 23 (BS23)........................................................................................................................88
Parameter Description:..................................................................................................................88
MOD BS23: IMSI="444441234567890", PROV=TRUE;............................................................88
9.28 Modify the Bearer Service 24 (BS24)........................................................................................................................88
Parameter Description:..................................................................................................................89
MOD BS24: IMSI="444441234567890",PROV=TRUE;.............................................................89
9.29 Modify the Bearer Service 25 (BS25)........................................................................................................................89
Parameter Description:..................................................................................................................89
MOD BS25: IMSI="444441234567890", PROV=TRUE;............................................................90
9.30 Modify the Bearer Service 26 (BS26)........................................................................................................................90
Parameter Description:..................................................................................................................90
MOD BS26: IMSI="444441234567890",PROV=TRUE;.............................................................90
9.31 Modify the Bearer Service 30 (BS30)........................................................................................................................91
Parameter Description:..................................................................................................................91
MOD BS30: IMSI="444441234567890", PROV=TRUE;............................................................91
9.32 Modify the Bearer Service 31 (BS31)........................................................................................................................92
Parameter Description:..................................................................................................................92
MOD BS31: IMSI="444441234567890", PROV=TRUE;............................................................92
9.33 Modify the Bearer Service 32 (BS32)........................................................................................................................92
Parameter Description:..................................................................................................................93
Parameter Description:..................................................................................................................93
MOD BS33: IMSI="444441234567890", PROV=TRUE;............................................................94
9.35 Modify the Bearer Service 34 (BS34)........................................................................................................................94
Parameter Description:..................................................................................................................94
MOD BS34: IMSI="444441234567890", PROV=TRUE;............................................................94
9.36 Modify the Bearer Service 41 (BS41)........................................................................................................................95
Parameter Description:..................................................................................................................95
MOD BS41: IMSI="444441234567890", PROV=TRUE;............................................................95
9.37 Modify the Bearer Service 42 (BS42)........................................................................................................................95
Parameter Description:..................................................................................................................96
MOD BS42: IMSI="444441234567890", PROV=TRUE;............................................................96
9.38 Modify the Bearer Service 43 (BS43)........................................................................................................................96
Parameter Description:..................................................................................................................96
MOD BS43: IMSI="444441234567890", PROV=TRUE;............................................................97
9.39 Modify the Bearer Service 44 (BS44)........................................................................................................................97
Parameter Description:..................................................................................................................97
MOD BS44: IMSI="444441234567890", PROV=TRUE;............................................................97
9.40 Modify the Bearer Service 45 (BS45)........................................................................................................................98
Parameter Description:..................................................................................................................98
MOD BS45: IMSI="444441234567890",PROV=TRUE;.............................................................98
9.41 Modify the Bearer Service 46 (BS46)........................................................................................................................98
Parameter Description:..................................................................................................................98
MOD BS46: IMSI="444441234567890",PROV=TRUE;.............................................................99
9.42 Modify the Bearer Service 51 (BS51)........................................................................................................................99
Parameter Description:..................................................................................................................99
MOD BS51: IMSI="444441234567890",PROV=TRUE;.............................................................99
9.43 Modify the Bearer Service 52 (BS52)......................................................................................................................100
Parameter Description:................................................................................................................100
MOD BS52: IMSI="444441234567890",PROV=TRUE;...........................................................100
9.44 Modify the Bearer Service 53 (BS53)......................................................................................................................101
Parameter Description:................................................................................................................101
Parameter Description:................................................................................................................101
MOD BS61: IMSI="444441234567890",PROV=TRUE;...........................................................102
9.46 Modify the Bearer Service 81 (BS81)......................................................................................................................102
Parameter Description:................................................................................................................102
MOD BS81: IMSI="444441234567890",PROV=TRUE;...........................................................102
9.47 Query Bearer Services..............................................................................................................................................103
Parameter Description:................................................................................................................103
LST BS: IMSI="444440123456789";............................................................................................103
9.48 Modify the ODB-SS.................................................................................................................................................103
Parameter Description:................................................................................................................104
MOD ODBSS: IMSI="984519856312345",ODBSS=TRUE;...................................................104
9.49 Modify the ODB-BIC Service..................................................................................................................................104
Parameter Description:................................................................................................................104
MOD ODBIC: IMSI="984519856312345",ODBIC=BAIC;.....................................................105
9.50 Modify the ODB-BOC Service................................................................................................................................105
Parameter Description:................................................................................................................105
MOD ODBOC: IMSI="984519856312345",ODBOC=BAOC;................................................106
9.51 Modify the ODB-PB1 Service..................................................................................................................................107
Parameter Description:................................................................................................................107
MOD ODBPB1: IMSI="984519856312345",ODBPB1=TRUE;...............................................107
9.52 Modify the ODB-PB2 Service..................................................................................................................................107
Parameter Description:................................................................................................................107
MOD ODBPB2: IMSI="984519856312345",ODBPB2=TRUE;...............................................108
9.53 Modify the ODB-PB3 Service..................................................................................................................................108
Parameter Description:................................................................................................................108
MOD ODBPB3: IMSI="984519856312345",ODBPB3=TRUE;...............................................108
9.54 Modify the ODB-PB4 Service..................................................................................................................................109
Parameter Description:................................................................................................................109
MOD ODBPB4: IMSI="984519856312345",ODBPB4=TRUE;...............................................109
9.55 Modify the ODB-Entertainment Service..................................................................................................................110
Parameter Description:................................................................................................................110
Parameter Description.................................................................................................................110
MOD ODBINFO: IMSI="984519856312345",ODBINFO=TRUE;........................................111
9.57 Modify the ODB-Roam Service...............................................................................................................................111
Parameter Description.................................................................................................................111
MOD ODBROAM: IMSI="984519856312345",ODBROAM=NOBAR;..............................112
9.58 Query the ODB Services..........................................................................................................................................113
Parameter Description:................................................................................................................113
LST ODBDAT: IMSI="984519856312345";...............................................................................113
9.59 Modify the CLIP Service..........................................................................................................................................114
Parameter Description:................................................................................................................114
MOD CLIP: IMSI="345126789012345",PROV=FALSE;.........................................................115
MOD CLIP:IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;.....................115
9.60 Query the CLIP Service............................................................................................................................................115
Parameter Description:................................................................................................................116
LST CLIP: IMSI="345126789012345";........................................................................................116
9.61 Modify the CLIR Service.........................................................................................................................................116
Parameter Description:................................................................................................................116
MOD CLIR: IMSI="345126789012345",PROV=FALSE;........................................................117
MOD CLIR: IMSI="345126789012345",PROV=TRUE,MODE=TEMPALLOWED;.........117
9.62 Query the CLIR Service...........................................................................................................................................118
Parameter Description:................................................................................................................118
LST CLIR: IMSI="345126789012345";.......................................................................................118
9.63 Modify the COLP Service........................................................................................................................................118
Parameter Description:................................................................................................................118
MOD COLP: IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;...................119
MOD COLP: IMSI="345126789012345",PROV=FALSE;.......................................................119
9.64 Query the COLP Service..........................................................................................................................................120
Parameter Description:................................................................................................................120
LST COLP: IMSI="345126789012345";......................................................................................120
9.65 Modify the COLR Service........................................................................................................................................120
Parameter Description:................................................................................................................121
Parameter Description:................................................................................................................122
LST COLR: IMSI="345126789012345";......................................................................................122
9.67 Query the Presentation/Restriction Attribute............................................................................................................122
Parameter Description:................................................................................................................122
LST PRERES: IMSI="984519856312345";..................................................................................122
9.68 Modify the CFU Service..........................................................................................................................................123
Parameter Description:................................................................................................................123
MOD CFU: IMSI="123454321234543",PROV=TRUE,OFAID=2,NCS=TRUE,.................124
9.69 Register the CFU Service.........................................................................................................................................124
Parameter Description:................................................................................................................124
9.70 Erase the CFU Service..............................................................................................................................................126
Parameter Description:................................................................................................................126
ERA CFU: IMSI="123454321234543";........................................................................................126
9.71 Modify the CFB Service...........................................................................................................................................127
Parameter Description:................................................................................................................127
9.72 Register the CFB Service.........................................................................................................................................128
Parameter Description:................................................................................................................128
9.73 Erase the CFB Service..............................................................................................................................................129
Parameter Description:................................................................................................................129
ERA CFB: IMSI="123454321234543";.........................................................................................130
9.74 Modify the CFNRy Service......................................................................................................................................130
Parameter Description:................................................................................................................130
9.75 Register the CFNRy Service.....................................................................................................................................132
Parameter Description:................................................................................................................132
9.76 Erase the CFNRy Service.........................................................................................................................................133
Parameter Description:................................................................................................................133
ERA CFNRY:IMSI="123454321234543";...................................................................................133
9.77 Modify the CFNRc Service......................................................................................................................................134
Parameter Description:................................................................................................................134
MOD CFNRC: IMSI="123454321234543",PROV=TRUE,OFAID=2,NCS=TRUE;...........135
9.78 Register the CFNRc Service.....................................................................................................................................135
Parameter Description:................................................................................................................135
Parameter Description:................................................................................................................136
ERA CFNRC: IMSI="123454321234543";..................................................................................137
9.80 Query All Call Forwarding Services........................................................................................................................137
Parameter Description:................................................................................................................137
LST CFALL: IMSI="984519856312345";....................................................................................137
"CFB"...............................................................................................................................................138
"CFNRC".........................................................................................................................................138
"CFNRY".........................................................................................................................................138
"CFD"..............................................................................................................................................139
9.81 Modify the Call Waiting Supplementary Service.....................................................................................................139
Parameter Description:................................................................................................................139
MOD CWAIT: IMSI="444441234567890",PROV=TRUE;......................................................139
9.82 Activate the Call Waiting Supplementary Service....................................................................................................140
Parameter Description:................................................................................................................140
ACT CWAIT: IMSI="123454321234543",BSG=TS1X;............................................................140
9.83 Deactivate the Call Waiting Supplementary Service................................................................................................141
Parameter Description:................................................................................................................141
DEA CWAIT: IMSI="123454321234543";..................................................................................141
9.84 Query the Call Waiting Supplementary Service.......................................................................................................142
Parameter Description:................................................................................................................142
LST CWAIT: IMSI="444441234567890";...................................................................................142
Output.............................................................................................................................................142
9.85 Modify the Call Hold Supplementary Service.........................................................................................................143
Parameter Description:................................................................................................................143
MOD HOLD: IMSI="444441234567890", PROV=TRUE;......................................................143
9.86 Query the Call Hold Supplementary Service...........................................................................................................144
Parameter Description:................................................................................................................144
LST HOLD: IMSI="444441234567890";.....................................................................................144
9.87 Modify the Multiparty Supplementary Service........................................................................................................144
Parameter Description:................................................................................................................144
MOD MPTY: IMSI="444441234567890", PROV=TRUE;.......................................................145
Parameter Description:................................................................................................................145
LST MPTY: IMSI="444441234567890";.....................................................................................145
9.89 Modify the AoCC Supplementary Service...............................................................................................................146
Parameter Description:................................................................................................................146
MOD AOCC: IMSI="444441234567890",PROV=TRUE;........................................................146
9.90 Query the AoCC Supplementary Service.................................................................................................................147
Parameter Description:................................................................................................................147
LST AOCC: IMSI="444441234567890";.....................................................................................147
9.91 Modify the AoCI Supplementary Service................................................................................................................147
Parameter Description:................................................................................................................147
MOD AOCI: IMSI="444441234567890", PROV=TRUE;........................................................148
9.92 Query the AoCI Supplementary Service..................................................................................................................148
Parameter Description:................................................................................................................148
LST AOCI: IMSI="444441234567890";......................................................................................148
9.93 Modify the ECT Supplementary Service..................................................................................................................149
Parameter Description:................................................................................................................149
MOD ECT: IMSI="444441234567890",PROV=TRUE;............................................................149
9.94 Query the ECT Supplementary Service....................................................................................................................150
Parameter Description:................................................................................................................150
LST ECT: IMSI="444441234567890";.........................................................................................150
9.95 Modify the BAOC Supplementary Service..............................................................................................................150
Parameter Description:................................................................................................................150
MOD BAOC:IMSI="444441234567890",PROV=TRUE;.........................................................151
9.96 Modify the BOIC Calls Supplementary Service......................................................................................................151
Parameter Description:................................................................................................................151
MOD BOIC: IMSI="444441234567890",PROV=TRUE;.........................................................152
9.97 Modify the BOIC-exHC Supplementary Service.....................................................................................................152
Parameter Description:................................................................................................................152
MOD BOICEXHC: IMSI="444441234567890",PROV=TRUE;..............................................152
9.98 Modify the BAIC Supplementary Service...............................................................................................................153
Parameter Description:................................................................................................................153
MOD BAIC: IMSI="444441234567890",PROV=TRUE;..........................................................153
Parameter Description:................................................................................................................154
MOD BICROM: IMSI="444441234567890",PROV=TRUE;..................................................154
9.100 Activate the BAOC Supplementary Service...........................................................................................................155
Parameter Description:................................................................................................................155
ACT BAOC: IMSI="444441234567890";....................................................................................155
9.101 Activate the BOIC Supplementary Service............................................................................................................156
Parameter Description:................................................................................................................156
ACT BOIC: IMSI="444441234567890";......................................................................................156
9.102 Activate the BOIC-exHC Supplementary Service.................................................................................................157
Parameter Description:................................................................................................................157
ACT BOICEXHC: IMSI="444441234567890";..........................................................................157
9.103 Activate the BAIC Supplementary Service............................................................................................................158
Parameter Description:................................................................................................................158
ACT BAIC: IMSI="444441234567890";......................................................................................158
9.104 Activate the BIC-Roam Supplementary Service....................................................................................................159
Parameter Description:................................................................................................................159
ACT BICROM: IMSI="444441234567890";...............................................................................159
9.105 Deactivate the BAOC Supplementary Service.......................................................................................................160
Parameter Description:................................................................................................................160
DEA BAOC: IMSI="444441234567890";....................................................................................160
9.106 Deactivate the BOIC Supplementary Service........................................................................................................161
Parameter Description:................................................................................................................161
DEA BOIC: IMSI="444441234567890";.....................................................................................161
9.107 Deactivate the BOIC-exHC Supplementary Service..............................................................................................162
Parameter Description:................................................................................................................162
DEA BOICEXHC: IMSI="444441234567890";..........................................................................162
9.108 Deactivate the BAIC Supplementary Service........................................................................................................163
Parameter Description:................................................................................................................163
DEA BAIC: IMSI="444441234567890";......................................................................................163
9.109 Deactivate the BIC-Roam Supplementary Service................................................................................................164
Parameter Description:................................................................................................................164
DEA BICROM: IMSI="444441234567890";...............................................................................164
Parameter Description:................................................................................................................166
MOD BARPWD: IMSI="444440123456789",PWD="1234";...................................................166
9.112 Modify the Call Barring Control Party...................................................................................................................167
Parameter Description:................................................................................................................167
MOD CBCOU: IMSI="444441234567890", COU=OPERATOR;..........................................167
9.113 Query Supplementary Services..............................................................................................................................168
Parameter Description:................................................................................................................168
LST SS: IMSI="444441234567890";............................................................................................168
9.114 Modify the VLR/SGSN-Specific Roaming Restriction Service............................................................................171
Parameter Description:................................................................................................................171
MOD VSRR: IMSI="984519856312345",PROV=TRUE,TPLTYPE=VLR,TPLID=123;.....172
MOD VSRR: IMSI="984519856312345", PROV=FALSE,TPLTYPE=VLR;........................172
9.115 Query the VLR/SGSN-Specific Roaming Restriction Service..............................................................................172
Parameter Description:................................................................................................................172
LST VSRR: IMSI="984519856312345";......................................................................................172
9.116 Modify the GPRS Service Using a Template.........................................................................................................173
Parameter Description:................................................................................................................173
MOD TPLGPRS: IMSI="984519856312345",PROV=TRUE,TPLID=123;...........................173
9.117 Query the GPRS Service........................................................................................................................................174
Parameter Description:................................................................................................................174
LST GPRS: IMSI="984519856312345";......................................................................................174
9.118 Modify Network Access Mode...............................................................................................................................175
Parameter Description:................................................................................................................176
MOD NAM: IMSI="984519856312345", NAM=BOTH;.........................................................176
9.119 Query Network Access Mode.................................................................................................................................176
Parameter Description:................................................................................................................176
LST NAM: IMSI="984519856312345";.......................................................................................176
9.120 Modify the O-CSI Service......................................................................................................................................177
Parameter Description:................................................................................................................177
MOD OCSI: ISDN="987654321",PROV=TRUE,TPLID=2;...................................................177
Parameter Description:................................................................................................................178
MOD TCSI: ISDN="987654321",PROV=TRUE,TPLID=2;...................................................178
9.122 Modify the VT-CSI Service....................................................................................................................................179
Parameter Description:................................................................................................................179
MOD VTCSI: ISDN="987654321",PROV=TRUE,TPLID=2;................................................179
9.123 Modify the U-CSI Service......................................................................................................................................180
Parameter Description:................................................................................................................180
MOD UCSI: ISDN="987654321",PROV=TRUE,TPLID=2;...................................................180
9.124 Modify the SS-CSI Service....................................................................................................................................181
Parameter Description:................................................................................................................181
MOD SSCSI: ISDN="987654321",PROV=TRUE,TPLID=2;.................................................181
9.125 Modify the TIF-CSI Service...................................................................................................................................182
Parameter Description:................................................................................................................182
MOD TIFCSI: ISDN="987654321",PROV=TRUE;.................................................................182
9.126 Modify the M-CSI Service.....................................................................................................................................183
Parameter Description:................................................................................................................183
MOD MCSI: ISDN="987654321",PROV=TRUE,TPLID=2;..................................................183
9.127 Modify the SMS-CSI Service.................................................................................................................................184
Parameter Description:................................................................................................................184
9.128 Modify the GPRS-CSI Service...............................................................................................................................185
Parameter Description:................................................................................................................185
MOD GPRSCSI: ISDN="987654321",PROV=TRUE,TPLID=2;...........................................185
9.129 Modify the D-CSI Service......................................................................................................................................186
Parameter Description:................................................................................................................186
MOD DCSI: ISDN="987654321",PROV=TRUE,TPLID=2;...................................................186
9.130 Query the CSI Service............................................................................................................................................187
Parameter Description:................................................................................................................187
LST CSI: ISDN="987654321", CSITYPE=ALL;........................................................................188
9.131 Send a Cancel Location Message...........................................................................................................................188
Parameter Description:................................................................................................................188
SND CANCELC: IMSI="984519856312345",VLRNO="123456789",CHECK=FALSE;.....190
9.132 Modify the Short Message Deliver Path................................................................................................................191
Parameter Description:................................................................................................................191
MOD SMDP: IMSI="444441234567890", SMDP=MSC;........................................................191
9.133 Query the Short Message Deliver Path..................................................................................................................192
Parameter Description:................................................................................................................192
LST SMDP: IMSI="984519856312345";.....................................................................................192
9.134 Modify the LCS......................................................................................................................................................192
Parameter Description:................................................................................................................192
MOD LCS: IMSI="984519856312345",PROV=TRUE,TPLID=123;......................................193
9.135 Query the LCS........................................................................................................................................................193
Parameter Description:................................................................................................................194
MOD CATEGORY: IMSI="984519856312345",CATEGORY=COMMON;.......................195
9.137 Query the Subscriber Category..............................................................................................................................195
Parameter Description:................................................................................................................195
LST CATEGORY: IMSI="984519856312345";..........................................................................195
9.138 Add a Subscriber.....................................................................................................................................................196
Parameter Description:................................................................................................................196
9.139 Modify the CUG Subscription Data.......................................................................................................................224
Parameter Description:................................................................................................................224
9.140 Modify the CUG Feature Data...............................................................................................................................226
Parameter Description:................................................................................................................226
9.141 Query the CUG Data..............................................................................................................................................228
Parameter Description:................................................................................................................228
LST CUG: ISDN="955678112";...................................................................................................228
"CUG Subscription List".............................................................................................................228
9.142 Modify the NAEA Service.....................................................................................................................................229
Parameter Description:................................................................................................................229
MOD NAEA: IMSI="444441234567890", PROV=TRUE,NAEA=39,NAEATYPE=BOTH;
..........................................................................................................................................................229
9.143 Query the NAEA Services......................................................................................................................................230
Parameter Description:................................................................................................................230
LST NAEA: IMSI="444441234567890";.....................................................................................230
9.144 Add a KI or Modify an Existing KI........................................................................................................................231
Parameter Description:................................................................................................................231
9.145 Query the KI Value.................................................................................................................................................233
Parameter Description:................................................................................................................233
LST KI: IMSI="123456789";.........................................................................................................233
9.146 Remove the KI Value..............................................................................................................................................234
Parameter Description:................................................................................................................234
RMV KI: IMSI="123456789";......................................................................................................234
9.147 Check the KI Value.................................................................................................................................................234
Parameter Description:................................................................................................................234
CHK KI: IMSI="123456789";.......................................................................................................234
9.148 Modify the USIM/SIM Card Type.........................................................................................................................235
Parameter Description:................................................................................................................235
9.149 Modify the CFD Service........................................................................................................................................236
Parameter Description:................................................................................................................236
9.150 Modify the ODB-BRCF Service............................................................................................................................239
Parameter Description:................................................................................................................239
MOD ODBRCF: IMSI="984519856312345", ODBRCF=NOBRCF;......................................240
9.151 Modify the ODB-BECT Service............................................................................................................................240
Parameter Description:................................................................................................................240
MOD ODBECT: IMSI="984519856312345", ODBECT=NOBECT;......................................241
9.152 Modify the BORO Service.....................................................................................................................................242
Parameter Description:................................................................................................................242
MOD BORO: IMSI="444441234567890",PROV=TRUE;........................................................242
9.153 Activate the BORO Service....................................................................................................................................243
Parameter Description.................................................................................................................243
ACT BORO: IMSI="444441234567890";....................................................................................243
9.154 Deactivate the BORO Service................................................................................................................................244
Parameter Description:................................................................................................................244
DEA BORO: IMSI="444441234567890";....................................................................................244
9.155 Modify the GPRS Service Without a Template......................................................................................................245
Parameter Description:................................................................................................................245
9.156 Modify the PLMN Specific Supplementary Services............................................................................................251
Parameter Description:................................................................................................................251
Parameter Description:................................................................................................................252
MOD ALS: IMSI="984519856312345",PROV=TRUE,LINE2NUM="1234567890123";.....253
9.158 Query the ALS Service...........................................................................................................................................253
Parameter Description:................................................................................................................253
LST ALS: IMSI="444441234567890";.........................................................................................254
9.159 Modify the VVDN Service.....................................................................................................................................254
Parameter Description:................................................................................................................254
MOD VVDN: IMSI="444441234567890", PROV=TRUE;......................................................254
9.160 Query the VVDN Service.......................................................................................................................................255
Parameter Description:................................................................................................................255
LST VVDN: IMSI="444441234567890";....................................................................................255
9.161 Modify the RBT Service.........................................................................................................................................255
Parameter Description:................................................................................................................255
MOD RBT: IMSI="444441234567890",PROV=TRUE,RBT=6;..............................................256
9.162 Query the RBT Service...........................................................................................................................................256
Parameter Description:................................................................................................................256
LST RBT: IMSI="444441234567890";.........................................................................................256
9.163 Modify the ODBPOS Service................................................................................................................................257
Parameter Description:................................................................................................................257
9.164 Modify the EMLPP Service...................................................................................................................................258
Parameter Description:................................................................................................................258
9.165 Query the EMLPP Service.....................................................................................................................................259
Parameter Description:................................................................................................................259
LST EMLPP: IMSI="444441234567890";...................................................................................259
9.166 Modify the ECATEGORY Service.........................................................................................................................260
Parameter Description:................................................................................................................260
MOD ECATEGORY: IMSI="444441234567890",PROV=TRUE, ECATEGORY=6;..........260
9.167 Query the ECATEGORY Service...........................................................................................................................261
Parameter Description:................................................................................................................261
Parameter Description:................................................................................................................262
9.169 Query the ARD Service..........................................................................................................................................263
Parameter Description:................................................................................................................263
LST ARD: IMSI="444441234567890";........................................................................................264
9.170 Modify the CARP Service......................................................................................................................................264
Parameter Description:................................................................................................................264
MOD CARP: IMSI="444441234567890",PROV=TRUE, CARP=6;.......................................265
9.171 Query the CARP Service........................................................................................................................................265
Parameter Description:................................................................................................................265
LST CARP: IMSI="444441234567890";......................................................................................265
9.172 Modify the RSZI Service........................................................................................................................................266
Parameter Description:................................................................................................................266
9.173 Query the RSZI Service..........................................................................................................................................267
Parameter Description:................................................................................................................267
LST RSZI: IMSI="444441234567890";........................................................................................267
9.174 Modify the BS........................................................................................................................................................267
Parameter Description:................................................................................................................267
MOD BS: IMSI="444441234567890",BS20=TRUE, BS25=TRUE;.........................................270
9.175 Modify the EIN Service..........................................................................................................................................270
Parameter Description:................................................................................................................270
MOD EIN: IMSI="460000009123456", OSKPROV=TRUE, OSK=2;...................................272
9.176 Query the EIN Service............................................................................................................................................272
Parameter Description:................................................................................................................272
LST EIN: IMSI="460000009123456";..........................................................................................272
9.177 Modify the VBS Service Using a Template...........................................................................................................273
Parameter Description:................................................................................................................273
MOD TPLVBS: IMSI="444441234567890",PROV=TRUE, TPLID=1;.................................273
9.178 Modify the VBS Service........................................................................................................................................274
Parameter Description:................................................................................................................274
9.179 Query the VBS Service..........................................................................................................................................275
Parameter Description:................................................................................................................275
Parameter Description:................................................................................................................276
MOD TPLVGCS: IMSI="444441234567890",PROV=TRUE, TPLID=1;..............................276
9.181 Modify the VGCS...................................................................................................................................................277
Parameter Description:................................................................................................................277
9.182 Query the VGCS.....................................................................................................................................................278
Parameter Description:................................................................................................................278
LST VGCS: IMSI="444441234567890";.....................................................................................278
9.183 Modify the Data of Remote Subscribers................................................................................................................278
Parameter Description:................................................................................................................279
9.184 Query the Data of Remote Subscribers..................................................................................................................280
Parameter Description:................................................................................................................280
LST RMPY: RMNUM="955589";...............................................................................................280
9.185 Modify the FM Service..........................................................................................................................................280
Parameter Description:................................................................................................................280
9.186 Query the FM Service Data....................................................................................................................................281
Parameter Description:................................................................................................................281
LST FM: IMSI="123456789";.......................................................................................................282
9.187 Send a USSD Notify Request.................................................................................................................................282
Parameter Description:................................................................................................................282
SND FMNOTIFY: RMNUM="955589", INITNUM="861386559";.......................................282
9.188 Modify the Data of an Authorized Subscriber........................................................................................................283
Parameter Description:................................................................................................................283
9.189 Query the Data of an Authorized Subscriber..........................................................................................................284
Parameter Description:................................................................................................................284
9.190 Modify FM Registration Data................................................................................................................................285
Parameter Description:................................................................................................................285
9.191 Modify UUS Service..............................................................................................................................................285
Parameter Description:................................................................................................................285
MOD UUS: IMSI="460000009123456", PROV=TRUE, UUS=UUS2;..................................286
9.192 Query UUS Service................................................................................................................................................286
Parameter Description:................................................................................................................286
LST UUS: IMSI="460000009123456";.........................................................................................286
Parameter Description:................................................................................................................287
9.194 Modify the TS Services..........................................................................................................................................289
Parameter Description:................................................................................................................289
MOD TS: IMSI="444441234567890", TS11=TRUE, TS21=TRUE, TS61=TRUE;...............290
9.195 Modify the ODB Services......................................................................................................................................290
Parameter Description:................................................................................................................290
9.196 Modify the Number Identification Services...........................................................................................................295
Parameter Description:................................................................................................................295
9.197 Modify Other SSs...................................................................................................................................................297
Parameter Description:................................................................................................................297
MOD OSS: IMSI="444441234567890",CWAIT=TRUE,ACTCWAIT=TS1X,
HOLD=TRUE;...............................................................................................................................299
9.198 Query Other SSs.....................................................................................................................................................300
Parameter Description:................................................................................................................300
LST OSS: IMSI="444441234567890", DETAIL=TRUE;..........................................................300
9.199 Modify the CB Services.........................................................................................................................................301
Parameter Description:................................................................................................................301
9.200 Modify the CAMEL Services.................................................................................................................................303
Parameter Description:................................................................................................................303
9.201 Check the Subscriber Data Consistency.................................................................................................................306
Parameter Description:................................................................................................................306
CHK CONSY: IMSI="111111111111111";.................................................................................306
9.202 Modify the SMSCF Service...................................................................................................................................307
Parameter Description:................................................................................................................307
MOD SMSCF: IMSI="460000009123456", PROV=TRUE, OFAID=1;.................................307
MOD SMSCF: IMSI="460000009123456", PROV=FALSE;...................................................307
9.203 Active Subscriber’s SMSCF Service......................................................................................................................308
Parameter Description:................................................................................................................308
9.204 Query the SMSCF Service.....................................................................................................................................309
Parameter Description:................................................................................................................309
LST SMSCF: IMSI="460000009123456";...................................................................................309
9.205 Modify the MC Service..........................................................................................................................................309
Parameter Description:................................................................................................................309
Parameter Description:................................................................................................................310
LST MC: IMSI="460000009123456";..........................................................................................310
9.207 Modify the IST Service..........................................................................................................................................311
Parameter Description:................................................................................................................311
MOD IST: IMSI="465700000000000", PROV=TRUE, ISTTIMER=20, ISTRSP=EMPTY;
..........................................................................................................................................................312
9.208 Query the IST Service............................................................................................................................................312
Parameter Description:................................................................................................................312
LST IST: IMSI="460000009123456";...........................................................................................312
9.209 Send a Command for Immediate Service Termination..........................................................................................313
Parameter Description:................................................................................................................313
SND ISTCMD: IMSI="984519856312345",MSCNUM="123456789";..................................313
9.210 Modify the DIC Service.........................................................................................................................................314
Parameter Description:................................................................................................................314
MOD DIC: IMSI="460111111111111", PROV=TRUE, DICLENGTH=DICR_0;...............314
9.211 Query the DIC Service...........................................................................................................................................315
Parameter Description:................................................................................................................315
LST DIC: IMSI="460111111111111";.........................................................................................315
9.212 Modify the Multi-IMSI Service..............................................................................................................................315
Parameter Description:................................................................................................................315
9.213 Query the Multi-IMSI Service................................................................................................................................317
Parameter Description:................................................................................................................317
LST MIMSI: IMSI="460111111111111";....................................................................................318
9.214 Modify the ROUTECATEGORY Service..............................................................................................................319
Parameter Description:................................................................................................................319
9.215 Query the ROUTECATEGORY Service................................................................................................................319
Parameter Description:................................................................................................................320
LST ROUTECATEGORY: IMSI="460100008001001";...........................................................320
9.216 Modify the Expand Enhanced Routing Service.....................................................................................................320
Parameter Description:................................................................................................................320
9.217 Query the Expand Enhanced Routing Service.......................................................................................................321
Parameter Description:................................................................................................................321
Parameter Description:................................................................................................................322
9.219 Query the Multi-IMSI Voice Mail Service.............................................................................................................322
Parameter Description:................................................................................................................322
LST MIMSIVM: IMSI="460100008001001";.............................................................................323
9.220 Modify the Call Redirection Service......................................................................................................................323
Parameter Description:................................................................................................................323
MOD CR: IMSI="460100008001001", PROV=TRUE, CALLREDIRECT=23;.....................323
9.221 Query the Call Redirection Service........................................................................................................................324
Parameter Description:................................................................................................................324
LST CR: IMSI="460100008001001";...........................................................................................324
9.222 Modify the NRBT Service......................................................................................................................................324
Parameter Description:................................................................................................................324
MOD NRBT: IMSI="444441234567890",PROV=TRUE,NRBT=600;...................................325
9.223 Query the NRBT Service........................................................................................................................................326
Parameter Description:................................................................................................................326
LST NRBT: IMSI="444441234567890";......................................................................................326
9.224 Modify the Optimized GPRS/EPS Data.................................................................................................................326
Parameter Description:................................................................................................................332
LST OPTGPRS: IMSI="444441234567890";..............................................................................332
"Binding OptGprsTpl Data".......................................................................................................333
9.226 Modify the Optimized GPRS by a Template..........................................................................................................334
Parameter Description:................................................................................................................334
MOD TPLOPTGPRS: IMSI="460000009123456", PROV=TRUE, TPLID=2;.....................334
9.227 Modify Multi-Number User Group Services.........................................................................................................335
Parameter Description:................................................................................................................335
9.228 List Multi-Number User Group Services...............................................................................................................336
Parameter Description:................................................................................................................336
LST MNUG: IMSI="460000009123456";...................................................................................336
Parameter Description:................................................................................................................337
MOD CCBS: IMSI="460000009123456", CCBS=TRUE, CCBSTARGET=TRUE;.............337
9.230 Query the CCBS Service........................................................................................................................................338
Parameter Description:................................................................................................................338
LST CCBS: IMSI="460000009012345";......................................................................................338
9.231 Modify CSI STATE................................................................................................................................................338
Parameter Description:................................................................................................................338
MOD CSISTATE: IMSI="4600000000000", CSITYPE=MCSI, CSISTATE=TRUE;..........339
Output.............................................................................................................................................339
9.232 Modify Subscription Data of ACR.........................................................................................................................339
Parameter Description:................................................................................................................339
MOD ACR: IMSI="444441234567890",PROV=TRUE;...........................................................339
Output.............................................................................................................................................340
9.233 Query Subscription Data of ACR...........................................................................................................................340
Parameter Description:................................................................................................................340
LST ACR: IMSI="444441234567890";........................................................................................340
Output.............................................................................................................................................340
9.234 Activate ACR..........................................................................................................................................................340
Parameter Description:................................................................................................................340
ACT ACR: IMSI="444441234567890";.......................................................................................341
Output.............................................................................................................................................341
9.235 Deactivate ACR......................................................................................................................................................341
Parameter Description:................................................................................................................341
DEA ACR: IMSI="444441234567890";.......................................................................................341
Output.............................................................................................................................................341
9.236 Add the IMSI-Specific Routing Data.....................................................................................................................342
Parameter Description:................................................................................................................342
ADD IMSIRTSUB: IMSI="123456", HLRSN="222";..............................................................342
Output.............................................................................................................................................342
9.237 Modify the IMSI-Specific Routing Data................................................................................................................342
Parameter Description:................................................................................................................342
Parameter Description:................................................................................................................343
LST IMSIRTSUB: IMSI="123456";............................................................................................343
Output.............................................................................................................................................343
9.239 Remove the IMSI-Specific Routing Data...............................................................................................................343
Parameter Description:................................................................................................................343
RMV IMSIRTSUB: IMSI="123456";.........................................................................................344
Output.............................................................................................................................................344
9.240 Add the NPOTHERRPT Data................................................................................................................................344
Parameter Description:................................................................................................................344
ADD NPOTHERRPT: ISDN="86131075003002", RN="1112";..............................................344
Output.............................................................................................................................................344
9.241 Remove the NPOTHERRPT Data..........................................................................................................................344
Parameter Description:................................................................................................................345
RMV NPOTHERRPT: ISDN="86131075003002";...................................................................345
Output.............................................................................................................................................345
9.242 Modify the NPOTHERRPT Data...........................................................................................................................345
Parameter Description:................................................................................................................345
MOD NPOTHERRPT: ISDN="86131075003003", RN="1113";.............................................345
Output.............................................................................................................................................345
9.243 Query the NPOTHERRPT Data.............................................................................................................................346
Parameter Description:................................................................................................................346
Output.............................................................................................................................................346
9.244 Add the NPDONORSUB Data...............................................................................................................................346
Parameter Description:................................................................................................................346
ADD NPDONORSUB: IMSI="4601075003001",ISDN="86131075003001", RN="1112";..347
Output.............................................................................................................................................347
9.245 Modify the NPDONORSUB Data..........................................................................................................................347
Parameter Description:................................................................................................................347
MOD NPDONORSUB: IMSI="460000009012345", RN="1113";..........................................347
Output.............................................................................................................................................347
9.246 Remove the NPDONORSUB Data........................................................................................................................348
Parameter Description:................................................................................................................348
RMV NPDONORSUB: ISDN="86138075003001";.................................................................348
Output.............................................................................................................................................348
9.247 Query the NPDONORSUB Data............................................................................................................................348
Parameter Description:................................................................................................................348
LST NPDONORSUB: IMSI="460000009012345";...................................................................348
Output.............................................................................................................................................348
9.248 Modify the SMSROUTE Data...............................................................................................................................349
Parameter Description:................................................................................................................349
MOD SMSROUTE: IMSI="460000009123456", PROV=TRUE, TPLID=4;.........................349
Output.............................................................................................................................................349
9.249 Query the SMSROUTE Data.................................................................................................................................350
Parameter Description:................................................................................................................350
LST SMSROUTE: IMSI="460000009123456";..........................................................................350
Output.............................................................................................................................................350
9.250 Activating the CFD Service....................................................................................................................................350
Parameter Description:................................................................................................................350
ACT CFD: IMSI="460000009123456";........................................................................................351
Output.............................................................................................................................................351
9.251 Deactivating the CFD Service................................................................................................................................351
Parameter Description:................................................................................................................351
DEA CFD: IMSI="460000009123456";.......................................................................................351
Output.............................................................................................................................................351
9.252 Send a Simulative UpdateLocation Message.........................................................................................................352
Parameter Description:................................................................................................................352
SND UPL: ISDN="86131075003003";.........................................................................................352
9.253 Send a Reset Update Location Message.................................................................................................................352
Parameter Description:................................................................................................................352
N/A..................................................................................................................................................352
RST UPL:;.......................................................................................................................................352
Parameter Description:................................................................................................................353
ACT ISDN: ISDN="13516888888";............................................................................................353
9.255 Modify the NSMSIN..............................................................................................................................................353
Parameter Description:................................................................................................................353
9.256 List the NSMSIN....................................................................................................................................................354
Parameter Description:................................................................................................................354
LST NSMSIN: IMSI="460000009123456";................................................................................355
9.257 Modifythe COMISDN Service...............................................................................................................................355
Parameter Description:................................................................................................................355
9.258 List the COMISDN Service....................................................................................................................................356
Parameter Description:................................................................................................................356
LST COMISDN: IMSI="460000009012345";............................................................................356
9.259 List the OWNISDN................................................................................................................................................357
Parameter Description:................................................................................................................357
LST OWNISDN: ISDN="460000009123456";...........................................................................357
9.260 Modify the Default OFA Service............................................................................................................................357
Parameter Description:................................................................................................................357
MOD DEFAULTOFA: IMSI="460035589300001", DEFAULTOFA_ID=8;.........................358
9.261 Listing the Default OFA Service............................................................................................................................358
Parameter Description:................................................................................................................358
LST DEFAULTOFA: IMSI="460035589300001";.....................................................................358
9.262 Modify the CPP Service.........................................................................................................................................359
Parameter Description:................................................................................................................359
MOD CPP: IMSI="460035589300001", PROV=TRUE;...........................................................359
9.263 List the CPP Service...............................................................................................................................................359
Parameter Description:................................................................................................................359
LST CPP: IMSI="460035589300001";.........................................................................................359
9.264 Modify the NIR Service.........................................................................................................................................360
Parameter Description:................................................................................................................360
MOD NIR: IMSI="460000009123456", PROV=TRUE, NIR=22;...........................................360
MOD NIR: IMSI="460000009123456", PROV=FALSE;.........................................................360
9.265 List the NIR Service...............................................................................................................................................361
Parameter Description:................................................................................................................361
LST NIR: IMSI="460000009123456";.........................................................................................361
9.266 Modify the ELCS Service......................................................................................................................................361
Parameter Description:................................................................................................................362
MOD ELCS: IMSI="460035589300001", PROV=TRUE;.........................................................362
9.267 List the ELCS Service............................................................................................................................................362
Parameter Description:................................................................................................................362
LST ELCS: IMSI="460035589300001";.......................................................................................362
9.268 Modify the M2M Binding Service.........................................................................................................................363
Parameter Description:................................................................................................................363
9.269 List the M2M Binding Service...............................................................................................................................364
Parameter Description:................................................................................................................364
LST IMEIBIND: IMSI="123456789123456";.............................................................................364
9.270 Modify the Status Notify to M2M Service.............................................................................................................364
Parameter Description:................................................................................................................365
MOD M2MNOTIFY: IMSI="123456789012345", PROV=TRUE;.........................................365
Output.............................................................................................................................................365
9.271 Listing status notify to M2M Service.....................................................................................................................365
Parameter Description:................................................................................................................365
LST M2MNOTIFY: IMSI="123456789123456";.......................................................................365
Output.............................................................................................................................................365
9.272 Modifying the Charging Area Service....................................................................................................................366
Parameter Description:................................................................................................................366
MOD CA: IMSI="460000009012345", PROV=TRUE, CA1=1, CA2=2;................................366
Output.............................................................................................................................................366
9.273 Listing the Charging Area Service (LST CA)........................................................................................................366
Parameter Description:................................................................................................................367
LST CA: IMSI="460000009012345";...........................................................................................367
Output.............................................................................................................................................367
9.274 Modifying the Fraud Prevention Service...............................................................................................................367
Parameter Description:................................................................................................................367
MOD FRAUD: IMSI="444441234567890",PROV= TRUE , TPLID=2;................................368
Output.............................................................................................................................................368
9.275 Listing the Fraud Prevention Service.....................................................................................................................368
Parameter Description:................................................................................................................368
LST FRAUD: IMSI="460035589300001";...................................................................................368
Output.............................................................................................................................................368
9.276 Modify the CNAP Service......................................................................................................................................368
Parameter Description:................................................................................................................369
MOD CNAP:IMSI="345126789012345",PROV=FALSE;.......................................................369
MOD CNAP:IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;...................369
9.277 Query the CNAP Service........................................................................................................................................369
Parameter Description:................................................................................................................369
LST CNAP: IMSI="345126789012345";.....................................................................................370
9.278 Modifying NON-3GPP Subscriber Attributes........................................................................................................370
Parameter Description:................................................................................................................370
MOD NONSUB: IMSI="460000009012345", NON3GPPSUPP=FALSE;............................371
9.279 Listing NON-3GPP Subscriber Attributes..............................................................................................................371
Parameter Description:................................................................................................................371
LST NONSUB: IMSI="460000009012345";...............................................................................371
9.280 Adding a KI in a different Partition........................................................................................................................372
Parameter Description:................................................................................................................372
9.281 Listing Subscrier's Location and Status Information.............................................................................................373
Parameter Description:................................................................................................................374
9.282 Deleting Subscriber's GPRS Data..........................................................................................................................375
Parameter Description:................................................................................................................375
RMV GPRS: IMSI=”123456789”;...............................................................................................375
9.283 Modifying the ICS Service.....................................................................................................................................376
Parameter Description:................................................................................................................376
MOD ICSIND: IMSI="460000009012345", ICSIND=TRUE;................................................376
9.284 Listing the ICS Service...........................................................................................................................................376
Parameter Description:................................................................................................................376
LST ICSIND: IMSI="460000009012345";..................................................................................377
9.285 Modifying the Anchor Service...............................................................................................................................377
Parameter Description:................................................................................................................377
Parameter Description:................................................................................................................378
LST ANCHOR: IMSI="460000009012345";..............................................................................378
9.287 Modifying the IM-O-CSI Service..........................................................................................................................379
Parameter Description:................................................................................................................379
MOD IMOCSI:ISDN="987654321",PROV=TRUE,TPLID=2;..............................................379
9.288 Modifying the IM-VT-CSI Service........................................................................................................................380
Parameter Description:................................................................................................................380
MOD IMVTCSI:ISDN="987654321",PROV=TRUE,TPLID=2;............................................380
9.289 Modify a GROUPSIM Subscriber..........................................................................................................................380
Parameter Description:................................................................................................................380
9.290 List GROUPSIM Subscribers.................................................................................................................................383
Parameter Description:................................................................................................................384
LST GROUPSIM: GIMSI="460000000000000";.......................................................................384
9.291 Modify a GROUPSIM Member.............................................................................................................................385
Parameter Description:................................................................................................................385
9.292 Modifying the EGR................................................................................................................................................386
Parameter Description:................................................................................................................386
MOD EGR: IMSI="460030000000001", PROV=TRUE, EGRHLRSN=4;.............................387
9.293 Listing the EGR......................................................................................................................................................387
Parameter Description:................................................................................................................387
LST EGR: IMSI="460030000000003";.........................................................................................387
9.294 Modifying the EPS.................................................................................................................................................388
Parameter Description:................................................................................................................388
9.295 Listing the EPS.......................................................................................................................................................393
Parameter Description:................................................................................................................393
LST EPS: IMSI="460000009123456";..........................................................................................393
9.296 Modifying the LU-CSI Service..............................................................................................................................394
Parameter Description:................................................................................................................394
MOD LUCSI: IMSI="460000009123456", PROV=TRUE, TPLID=2;...................................394
9.297 Listing the LU-CSI Service....................................................................................................................................395
Parameter Description:................................................................................................................395
Parameter Description:................................................................................................................395
RMV CHANGEDISDN: ISDN="8613772897878";.................................................................395
9.299 Modify the PLMN Region Roaming Service.........................................................................................................396
Parameter Description:................................................................................................................396
MOD PLMNRSZI: IMSI="444441234567890", PROV = TRUE, PLMNTPLID =1;...........397
9.300 List the PLMN Region Roaming Service...............................................................................................................397
Parameter Description:................................................................................................................397
LST PLMNRSZI: IMSI="444441234567890";...........................................................................397
9.301 Modify the STN-SR for a Subscriber.....................................................................................................................398
Parameter Description:................................................................................................................398
MOD STNSR: IMSI="460000009123456", PROV =TRUE, STNSR =”4601389162252”;...398
9.302 List the STN-SR of a Subscriber............................................................................................................................399
Parameter Description:................................................................................................................399
LST STNSR: IMSI="444441234567890";...................................................................................400
9.303 Modify the APN Operator Identifier for a Subscriber............................................................................................400
Parameter Description:................................................................................................................400
9.304 List the APN Operator Identifier of a Subscriber...................................................................................................401
Parameter Description:................................................................................................................401
LST EPSAPNOI: IMSI="444441234567890";............................................................................401
9.305 Modify the EPS AMBR Data for a Subscriber......................................................................................................401
Parameter Description:................................................................................................................401
9.306 List the EPS AMBR Data of a Subscriber..............................................................................................................402
Parameter Description:................................................................................................................402
LST EPSAMBR: IMSI="444441234567890";.............................................................................403
9.307 Modify the Radio Frequency Access Selection Priority for a Subscriber..............................................................403
Parameter Description:................................................................................................................403
MOD RFPRID: IMSI="460000009123456", RATFREQSELPRIID =10;...............................403
9.308 List the Radio Frequency Access Selection Priority of a Subscriber.....................................................................404
Parameter Description:................................................................................................................404
LST RFPRID: IMSI="444441234567890";..................................................................................404
9.309 Modifying the Diameter Roaming Restriction Service..........................................................................................404
Parameter Description:................................................................................................................404
MOD DIAMRRS: IMSI="460000009123456", PROV=TRUE, DIAMNODETPL_ID=20;
..........................................................................................................................................................405
9.310 Listing the Diameter Roaming Restriction Service................................................................................................405
Parameter Description:................................................................................................................405
LST DIAMRRS: IMSI="444441234567890";.............................................................................406
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them......406
9.311 Modify the UserCategory.......................................................................................................................................406
Parameter Description:................................................................................................................406
MOD USERCATEGORY: IMSI="984519856312345",USERCATEGORY=M2M;............407
9.312 Listing the UserCategory........................................................................................................................................407
Parameter Description:................................................................................................................407
LST USERCATEGORY: IMSI="984519856312345";...............................................................407
9.313 Modify the Multi-SIM Service...............................................................................................................................408
Parameter Description:................................................................................................................408
9.314 List the Multi-SIM Service.....................................................................................................................................409
Parameter Description:................................................................................................................409
LST MSIM: IMSI="460000009123456";.....................................................................................409
9.315 Modify CSI Not Using Templates..........................................................................................................................410
Parameter Description:................................................................................................................410
9.316 List CSI Provided Not Using Templates................................................................................................................417
Parameter Description:................................................................................................................417
LST NTCSI: IMSI="460000009123456";....................................................................................418
IMSI = 460000009123456..............................................................................................................419
MSISDN = 13500001234..............................................................................................................419
OCSI DATA...................................................................................................................................419
CAMEL = PHASE3.......................................................................................................................419
OCSIDP = COLLECTINFO........................................................................................................419
SK = 1..............................................................................................................................................419
GSMSCFADD = 11234................................................................................................................419
DEFAULTCALL = continueCall................................................................................................419
TCSI DATA...................................................................................................................................419
CAMEL = PHASE3.......................................................................................................................419
TCSIDP = TAA.............................................................................................................................419
SK = 1..............................................................................................................................................419
GSMSCFADD = 11234................................................................................................................419
DEFAULTCALL = continueCall................................................................................................419
PSICONF = TRUE........................................................................................................................420
AVAILABLE_PLMN = HPLMN................................................................................................420
9.317 Modifying Premium SMS Barring Service............................................................................................................420
Parameter Description:................................................................................................................420
9.318 Listing Premium SMS Barring Service..................................................................................................................421
Parameter Description:................................................................................................................421
LST PREMSMS: IMSI="460000009123456";.............................................................................421
9.319 Modifying Zone Lock Service................................................................................................................................421
Parameter Description:................................................................................................................421
MOD ZCLOCK: IMSI="460000009123456", ZCLOCKPROV=TRUE;................................422
9.320 Listing Zone Lock Service.....................................................................................................................................422
Parameter Description:................................................................................................................422
LST ZCLOCK: IMSI="460000009123456";................................................................................422
9.321 Listing Zone Lock Service Data.............................................................................................................................423
Parameter Description:................................................................................................................423
LST DYNZC: IMSI="460000009123456";..................................................................................423
9.322 Reseting Zone Lock Service...................................................................................................................................423
Parameter Description:................................................................................................................423
RESET BINDEDTAI: IMSI="460000009123456";....................................................................424
9.323 Modifying the ALS Supplimentary Service...........................................................................................................424
Parameter Description:................................................................................................................424
MOD ALSSUPP: IMSI="460030000000001", PROV=TRUE, ALS_SUPP_TYPE=AOCC;
..........................................................................................................................................................424
9.324 Modifying the ALS ODB Service..........................................................................................................................425
Parameter Description:................................................................................................................425
9.325 Modifying the PS Services.....................................................................................................................................425
Parameter Description:................................................................................................................426
9.326 Modifying the EPS Services...................................................................................................................................427
Parameter Description:................................................................................................................427
9.327 Listing the PS Services...........................................................................................................................................428
Parameter Description:................................................................................................................428
LST PSSER: IMSI="460000009123456", DETAIL=FALSE;....................................................429
9.328 Listing the EPS Services........................................................................................................................................429
Parameter Description:................................................................................................................429
LST EPSSER: IMSI="460000009123456", DETAIL=FALSE;.................................................430
Output.............................................................................................................................................430
9.329 Modify the PS Services by PSUSERTPL...............................................................................................................430
Parameter Description:................................................................................................................430
MOD TPLPSSER: IMSI="460000009123456", TPLID=2;.......................................................431
9.330 Modify the EPS Services by EPSUSERTPL..........................................................................................................431
Parameter Description:................................................................................................................431
MOD TPLEPSSER: IMSI="460000009123456", RECORDCOUNT=4, TPLID=3;.............431
9.331 Adding a CS or PS Subscriber................................................................................................................................432
Parameter Description:................................................................................................................432
9.332 Modify the EPS by Template..................................................................................................................................458
Parameter Description:................................................................................................................458
MOD TPLEPS: IMSI="460000009123456", EPSUSERTPLID=2;..........................................458
9.333 Removing a CS or PS Subscriber...........................................................................................................................458
Parameter Description:................................................................................................................458
RMV CSPSSUB: ISDN="13310911001";...................................................................................459
9.334 Querying global charging characteristic.................................................................................................................460
Parameter Description:................................................................................................................460
LST CCGLOBAL: IMSI="460000009123456";..........................................................................460
9.335 Modify Global Charging Characteristic.................................................................................................................460
Parameter Description:................................................................................................................461
MOD CCGLOBAL: IMSI="460000009123456", CHARGE_GLOBAL=NORMAL;..........461
9.336 Adding a Subscriber by CSPS Template................................................................................................................461
Parameter Description:................................................................................................................462
9.337 Add a Convergent HSS Subscriber Using Template..............................................................................................462
Parameter Description:................................................................................................................462
9.338 Remove a Convergent HSS Subscriber..................................................................................................................464
Parameter Description:................................................................................................................464
RMV USCSUB: IMSI="460000009123456";..............................................................................464
9.339 Modifying the CAPL Service.................................................................................................................................465
Parameter Description:................................................................................................................465
MOD CAPL: IMSI="460000009123456", CAPLPROV=TRUE, CAPL=2;............................465
9.340 Listing the CAPL Service.......................................................................................................................................465
Parameter Description:................................................................................................................465
LST CAPL: IMSI="460000009123456";......................................................................................466
9.341 Modifying the EMMIN Service.............................................................................................................................466
Parameter Description:................................................................................................................466
MOD EMMIN: IMSI="1234567", PROV=ADD, DP=12, SCPADDR="1111", SK=12;.....467
9.342 Listing the EMMIN Service...................................................................................................................................467
Parameter Description:................................................................................................................468
LST EMMIN: IMSI="1234567";..................................................................................................468
9.343 Modifying the Association Between IMSI and MSISDN......................................................................................469
Parameter Description:................................................................................................................469
MOD IMSIISDN: IMSI="2013521", ISDN="2014521", PROV=TRUE;..............................469
9.344 Listing the Association Between IMSI and MSISDN............................................................................................470
Parameter Description:................................................................................................................470
LST IMSIISDN: IMSI="45000000";...........................................................................................470
IMSI = 45000000..........................................................................................................................470
ISDN = 2014521...........................................................................................................................470
9.345 Modify VoLTE Subscriber Flag..............................................................................................................................471
Parameter Description:................................................................................................................471
MOD VOLTETAG: IMSI="46000000012345", VOLTETAG=FALSE;.................................471
9.346 List VoLTE Subscriber Flag...................................................................................................................................472
Parameter Description:................................................................................................................472
LST VOLTETAG: IMSI="46000000012345";............................................................................472
9.347 Modify an UE-Level APN Operator Identifier Used in the PS Domain................................................................473
Parameter Description:................................................................................................................473
MOD PSAPNOI: IMSI="460000009123456", PROV =TRUE, PSAPNOITPLID = 1;........473
9.348 List UE-Level APN Operator Identifier Used in the PS Domain...........................................................................474
Parameter Description:................................................................................................................474
Parameter Description:................................................................................................................474
9.350 Remove a KI...........................................................................................................................................................475
Parameter Description:................................................................................................................475
9.351 Modify a KI............................................................................................................................................................476
Parameter Description:................................................................................................................476
9.352 List KIs...................................................................................................................................................................477
Parameter Description:................................................................................................................477
9.353 Check the Value of a KI..........................................................................................................................................478
Parameter Description:................................................................................................................478
9.354 Check the Value of an OPC....................................................................................................................................478
Parameter Description:................................................................................................................478
9.355 Add the HTTP Digest Authentication Information for an IMPI.............................................................................479
Parameter Description:................................................................................................................479
9.356 Remove the HTTP Digest Authentication Information of an IMPI.......................................................................480
Parameter Description:................................................................................................................480
9.357 Modify the HTTP Digest Authentication Information of an IMPI.........................................................................481
Parameter Description:................................................................................................................481
9.358 List the HTTP Digest Authentication Information of an IMPI..............................................................................482
Parameter Description:................................................................................................................482
9.359 Check the HTTP Digest Authentication Information.............................................................................................483
Parameter Description:................................................................................................................483
9.360 Add the SIP Digest Authentication Information for an IMPI.................................................................................483
Parameter Description:................................................................................................................484
9.361 Remove the SIP Digest Authentication Information of an IMPI............................................................................485
Parameter Description:................................................................................................................485
9.362 Modify the SIP Digest Authentication Information of an IMPI.............................................................................485
Parameter Description:................................................................................................................486
9.363 List the SIP Digest Authentication Information of an IMPI...................................................................................487
Parameter Description:................................................................................................................487
9.364 Check the SIP Digest Authentication Information of an IMPI...............................................................................488
Parameter Description:................................................................................................................488
9.365 Set the Early IMS Authentication Scheme.............................................................................................................489
Parameter Description:................................................................................................................489
Parameter Description:................................................................................................................489
9.367 Set the Early AKA Authentication Scheme............................................................................................................490
Parameter Description:................................................................................................................490
9.368 List the Early AKA Authentication Scheme...........................................................................................................491
Parameter Description:................................................................................................................491
9.369 Add the NASS Bundled Authentication Information for an IMPI.........................................................................491
Parameter Description:................................................................................................................492
9.370 Remove the NASS Bundled Authentication Information of an IMPI....................................................................492
Parameter Description:................................................................................................................492
9.371 List the NASS Bundled Authentication Information of an IMPI...........................................................................493
Parameter Description:................................................................................................................493
9.372 Set the TAA Authentication Scheme for an IMPI..................................................................................................494
Parameter Description:................................................................................................................494
9.373 List the TAA Authentication Scheme Supported by an IMPI.................................................................................494
Parameter Description:................................................................................................................494
TAAFLAG: 1 | 0............................................................................................................................495
Remark: 1 represents TRUE, 0 represents FALSE..................................................................495
9.374 Set the CAVEAKA Authentication Capability.......................................................................................................495
Parameter Description:................................................................................................................495
9.375 List the CAVEAKA Authentication Capability......................................................................................................496
Parameter Description:................................................................................................................496
9.376 List the Authentication Schemes Supported by an IMPI........................................................................................497
Parameter Description:................................................................................................................497
AKAFLAG: 1 | 0...........................................................................................................................497
EAAFLAG: 1 | 0............................................................................................................................497
9.377 Check the HA1 Value for an IMPI.........................................................................................................................498
Parameter Description:................................................................................................................498
9.378 Add an IMS Subscription.......................................................................................................................................498
Parameter Description:................................................................................................................498
9.379 Add an IMS Subscription Using One Command...................................................................................................499
Parameter Description:................................................................................................................500
9.380 Remove an IMS Subscription Using One Command.............................................................................................504
Parameter Description:................................................................................................................504
Parameter Description:................................................................................................................505
9.382 Modify an IMS Subscription ID.............................................................................................................................505
Parameter Description:................................................................................................................505
9.383 List IMS Subscription Information........................................................................................................................506
Parameter Description:................................................................................................................506
9.384 List an IMS Subscription Using One Command....................................................................................................507
Parameter Description:................................................................................................................507
9.385 Set IMS PBX Flag..................................................................................................................................................508
Parameter Description:................................................................................................................508
9.386 List IMS PBX Flag.................................................................................................................................................508
Parameter Description:................................................................................................................508
9.387 Set IMS Subscriber Description.............................................................................................................................509
Parameter Description:................................................................................................................509
9.388 List IMS Subscriber Description............................................................................................................................510
Parameter Description:................................................................................................................510
LST HSUBINFO: SUBID="6290000001";..................................................................................510
9.389 Set Service Data Consistency Flag.........................................................................................................................510
Parameter Description:................................................................................................................510
9.390 List Service Data Consistency Flag........................................................................................................................511
Parameter Description:................................................................................................................511
9.391 Add an IMS Subscriber..........................................................................................................................................512
Parameter Description:................................................................................................................512
9.392 List IMS Subscriber Data.......................................................................................................................................514
Parameter Description:................................................................................................................514
LST IMSSUB: IMSI="123456789";.............................................................................................514
9.393 Add an IMPI...........................................................................................................................................................515
Parameter Description:................................................................................................................515
9.394 Remove an IMPI.....................................................................................................................................................516
Parameter Description:................................................................................................................516
9.395 Modify an IMPI......................................................................................................................................................516
Parameter Description:................................................................................................................516
9.396 Modify an IMPI by One Command........................................................................................................................517
Parameter Description:................................................................................................................517
Parameter Description:................................................................................................................519
9.398 Remove an IMPU...................................................................................................................................................520
Parameter Description:................................................................................................................520
9.399 Modify an IMPU....................................................................................................................................................520
Parameter Description:................................................................................................................520
9.400 Check an IMPU......................................................................................................................................................521
Parameter Description:................................................................................................................521
9.401 Set the Sharing Attribute of an IMPU....................................................................................................................522
Parameter Description:................................................................................................................522
9.402 Add a PSI User.......................................................................................................................................................523
Parameter Description:................................................................................................................523
9.403 Remove a PSI User.................................................................................................................................................524
Parameter Description:................................................................................................................524
9.404 List PSI User Associations.....................................................................................................................................524
Parameter Description:................................................................................................................524
9.405 Set an IRS...............................................................................................................................................................525
Parameter Description:................................................................................................................525
9.406 Set the Default IMPU of an IRS.............................................................................................................................526
Parameter Description:................................................................................................................526
9.407 Add an IMSI...........................................................................................................................................................527
Parameter Description:................................................................................................................527
ADD HIMSI: IMSI="460001234567890", ISDN="8613988888888";......................................527
9.408 Remove an IMSI.....................................................................................................................................................527
Parameter Description:................................................................................................................528
RMV HIMSI: IMSI="460001234567890";..................................................................................528
9.409 Modify an IMSI......................................................................................................................................................528
Parameter Description:................................................................................................................528
MOD HIMSI: IMSI="460001234567890", NEWIMSI="460001234567891";........................528
9.410 Modify Subscriber Identities Using One Command..............................................................................................529
Parameter Description:................................................................................................................529
9.411 Add an MSISDN.....................................................................................................................................................530
Parameter Description:................................................................................................................530
ADD HISDN: IMSI="861381234567890", ISDN="861381234567890";.................................531
Parameter Description:................................................................................................................531
RMV HISDN: ISDN="861381234567890";................................................................................531
9.413 Modify an MSISDN...............................................................................................................................................531
Parameter Description:................................................................................................................531
MOD HISDN: ISDN="8613988888888", NEWISDN="8613977777777";.............................532
9.414 Modify MSISDNs and IMPUs Using One Command...........................................................................................532
Parameter Description:................................................................................................................532
9.415 List the IMSI Data Associated with an IMPI.........................................................................................................533
Parameter Description:................................................................................................................533
LST HMSID: IMSI="8613988888888";.......................................................................................533
9.416 Add an IMPI-IMSI Association..............................................................................................................................534
Parameter Description:................................................................................................................534
9.417 Remove an IMPI-IMSI Association.......................................................................................................................534
Parameter Description:................................................................................................................535
9.418 List IMPI-IMSI Associations.................................................................................................................................535
Parameter Description:................................................................................................................535
9.419 Modify the Multi-SIM Service for VoLTE.............................................................................................................536
Parameter Description:................................................................................................................536
MOD HMSIM: IMSI="1234567891", MASTERFLAG=TRUE;.............................................536
9.420 List the VoLTE Multi-SIM Service........................................................................................................................537
Parameter Description:................................................................................................................537
9.421 List IMS Subscription Information in Batches.......................................................................................................537
Parameter Description:................................................................................................................538
9.422 Set Mandatory or Optional Capabilities.................................................................................................................538
Parameter Description:................................................................................................................539
9.423 List Mandatory or Optional Capabilities................................................................................................................539
Parameter Description:................................................................................................................539
9.424 List Subscriber Capabilities....................................................................................................................................540
Parameter Description:................................................................................................................540
LST CAP: IMSI="123456789";.....................................................................................................540
9.425 Modify Subscriber Capabilities..............................................................................................................................541
Parameter Description:................................................................................................................541
9.426 Add an S-CSCF Name............................................................................................................................................542
Parameter Description:................................................................................................................542
9.427 Remove an S-CSCF Name.....................................................................................................................................543
Parameter Description:................................................................................................................543
9.428 List S-CSCF Names...............................................................................................................................................543
Parameter Description:................................................................................................................543
9.429 Set a Charging Address ID for an IMPI or a PISI..................................................................................................544
Parameter Description:................................................................................................................544
9.430 List Charging Address IDs of an IMPI or a PISI....................................................................................................545
Parameter Description:................................................................................................................545
9.431 Set the Registration Authority of an IMPU............................................................................................................545
Parameter Description:................................................................................................................546
9.432 List the Registration Authority of an IMPU...........................................................................................................546
Parameter Description:................................................................................................................546
REGAUTH: 1 | 0...........................................................................................................................547
Remark: 1 represents TRUE, 0 represents FALSE..................................................................547
9.433 Set the Roaming Authority Check Flag for an IMPU............................................................................................547
Parameter Description:................................................................................................................547
9.434 List the Roaming Authority Check Flag of an IMPU.............................................................................................548
Parameter Description:................................................................................................................548
VNCFLAG: 1 | 0...........................................................................................................................548
Remark: 1 represents TRUE, 0 represents FALSE..................................................................548
9.435 Set a Visited Network Template ID for an IMPU...................................................................................................548
Parameter Description:................................................................................................................548
9.436 List the Visited Network Template ID of an IMPU................................................................................................549
Parameter Description:................................................................................................................549
9.437 Set the NASS Nomadism Control Flag for an IMPU.............................................................................................550
Parameter Description:................................................................................................................550
9.438 List the NASS Nomadism Control Flag of an IMPU.............................................................................................550
Parameter Description:................................................................................................................550
NNCFLAG: 1 | 0...........................................................................................................................551
Remark: 1 represents ACTIVE, 0 represents DEACTIVE....................................................551
9.439 Set a NASS Nomadism Template ID for an IMPU................................................................................................551
Parameter Description:................................................................................................................551
9.440 List the NASS Nomadism Template ID of an IMPU.............................................................................................552
Parameter Description:................................................................................................................552
9.441 Set the Sharing of a Service Profile........................................................................................................................552
Parameter Description:................................................................................................................553
9.442 Remove the Sharing of a Service Profile...............................................................................................................553
Parameter Description:................................................................................................................553
9.443 List the Sharing Information of a Service Profile..................................................................................................554
Parameter Description:................................................................................................................554
9.444 Add Reference Location Information for an IMPU...............................................................................................555
Parameter Description:................................................................................................................555
9.445 Remove the Reference Location Information of an IMPU....................................................................................556
Parameter Description:................................................................................................................556
9.446 Modify the Reference Location Information of an IMPU......................................................................................557
Parameter Description:................................................................................................................557
9.447 List the Reference Location Information of an IMPU...........................................................................................559
Parameter Description:................................................................................................................559
DEFRLI: 1 | 0.................................................................................................................................560
9.448 Set the Barring Indication of an IMPU or a PUSI..................................................................................................560
Parameter Description:................................................................................................................560
9.449 List the Barring Indication of an IMPU or a PUSI.................................................................................................561
Parameter Description:................................................................................................................561
9.450 Set a Subscribed Media Profile ID.........................................................................................................................561
Parameter Description:................................................................................................................561
9.451 List Subscribed Media Profile IDs.........................................................................................................................562
Parameter Description:................................................................................................................562
9.452 Add an iFC..............................................................................................................................................................563
Parameter Description:................................................................................................................563
9.453 Remove an iFC.......................................................................................................................................................564
Parameter Description:................................................................................................................564
9.454 Modify an iFC........................................................................................................................................................565
Parameter Description:................................................................................................................565
9.455 List iFCs.................................................................................................................................................................566
Parameter Description:................................................................................................................567
9.456 Remove All iFC Data.............................................................................................................................................568
Parameter Description:................................................................................................................568
9.457 Remove the iFC of an IMPU by AS Address.........................................................................................................568
Parameter Description:................................................................................................................568
9.458 Add a Shared iFC Set.............................................................................................................................................569
Parameter Description:................................................................................................................569
9.459 Remove a Shared iFC Set.......................................................................................................................................570
Parameter Description:................................................................................................................570
9.460 Modify a Shared iFC Set........................................................................................................................................570
Parameter Description:................................................................................................................571
SUCCESS0001:Operation is successful....................................................................................571
9.461 List Shared iFC Sets...............................................................................................................................................571
Parameter Description:................................................................................................................571
9.462 Add a Service Provider ID......................................................................................................................................572
Parameter Description:................................................................................................................572
9.463 Remove a Service Provider ID...............................................................................................................................573
Parameter Description:................................................................................................................573
9.464 Modify a Service Provider ID................................................................................................................................573
Parameter Description:................................................................................................................574
9.465 List the Service Provider ID...................................................................................................................................574
Parameter Description:................................................................................................................574
9.466 Set the Priority of an IMPU or a PUSI...................................................................................................................575
Parameter Description:................................................................................................................575
9.467 List the Priority of an IMPU or a PUSI..................................................................................................................576
Parameter Description:................................................................................................................576
USRPRIOR: 0 | 1 | 2....................................................................................................................576
Remark: 0 represents HIGH, 1 represents MIDDLE, 2 represents LOW..........................576
9.468 Set 3GPP-Defined Priority of an IMPU or a PUSI................................................................................................576
Parameter Description:................................................................................................................577
9.469 List 3GPP-Defined Priority of an IMPU or a PUSI...............................................................................................577
Parameter Description:................................................................................................................578
STDPRIOR: 0 | 1 | 2 | 3 | 4.......................................................................................................578
9.470 Set the loose route indication of an IMPU or a PUSI.............................................................................................578
Parameter Description:................................................................................................................578
9.471 List the loose route indication of an IMPU or a PUSI...........................................................................................579
Parameter Description:................................................................................................................579
LRI: 0 | 1.........................................................................................................................................580
Parameter Description:................................................................................................................580
9.473 Remove an AS Service Profile ID of an IMPU or a PUSI.....................................................................................581
Parameter Description:................................................................................................................581
9.474 List the AS Service Profile IDs of an IMPU or a PUSI..........................................................................................581
Parameter Description:................................................................................................................581
9.475 Set an Alias Group ID.............................................................................................................................................582
Parameter Description:................................................................................................................582
9.476 Set the Repository Data..........................................................................................................................................583
Parameter Description:................................................................................................................583
9.477 List the Repository Data.........................................................................................................................................585
Parameter Description:................................................................................................................585
9.478 Add an Extended Service Data...............................................................................................................................586
Parameter Description:................................................................................................................586
9.479 Remove an Extended Service Data........................................................................................................................587
Parameter Description:................................................................................................................587
9.480 Modify an Extended Service Data..........................................................................................................................588
Parameter Description:................................................................................................................588
9.481 List an Extended Service Data...............................................................................................................................589
Parameter Description:................................................................................................................589
9.482 List the Service Indication of the Repository Data................................................................................................590
Parameter Description:................................................................................................................590
9.483 Set an AS Address for a PUSI................................................................................................................................591
Parameter Description:................................................................................................................592
9.484 List the AS Address of a PUSI...............................................................................................................................592
Parameter Description:................................................................................................................592
9.485 Set the CAMEL Subscription Information.............................................................................................................593
Parameter Description:................................................................................................................593
SET HCSI: IMSI="125353", ISDN="86137565425", CSITYPE=O-CSI, CSITPLID=10;....593
9.486 List the CAMEL Subscription Information............................................................................................................593
Parameter Description:................................................................................................................593
LST HCSI: IMSI="125353", CSITYPE=O-CSI;........................................................................594
9.487 List the Dynamic Location Information of an IMPU.............................................................................................594
Parameter Description:................................................................................................................594
Parameter Description:................................................................................................................596
SRVIND: Service Information......................................................................................................596
ALIASID: The ID of an Alias Group........................................................................................596
ExpiryTime: The Time When the Subscribed Data Expires......................................................596
9.489 List the Dynamic Data of an IMS Subscriber........................................................................................................596
Parameter Description:................................................................................................................597
PENDINGFLAG: 0 | 1.................................................................................................................597
Remark: 0 represents FALSE, 1 represents TRUE..................................................................597
9.490 List the Dynamic Data of a PSI User.....................................................................................................................598
Parameter Description:................................................................................................................598
9.491 Deregister Subscribers............................................................................................................................................599
Parameter Description:................................................................................................................599
9.492 Set the Emergency Service Routing Number.........................................................................................................599
Parameter Description:................................................................................................................599
9.493 List the Emergency Service Routing Number........................................................................................................600
Parameter Description:................................................................................................................600
9.494 Add the OneKey Data for an IMPU.......................................................................................................................601
Parameter Description:................................................................................................................601
9.495 Remove the OneKey Data of an IMPU..................................................................................................................601
Parameter Description:................................................................................................................601
9.496 Modify the OneKey Data of an IMPU...................................................................................................................602
Parameter Description:................................................................................................................602
9.497 List the OneKey Data of an IMPU.........................................................................................................................602
Parameter Description:................................................................................................................603
9.498 Add GUSS for an IMPI..........................................................................................................................................603
Parameter Description:................................................................................................................603
9.499 Remove GUSS from an IMPI.................................................................................................................................606
Parameter Description:................................................................................................................606
9.500 Modify GUSS of an IMPI......................................................................................................................................607
Parameter Description:................................................................................................................607
9.501 List GUSS of an IMPI............................................................................................................................................609
Parameter Description:................................................................................................................609
GSID: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13................................................610
Parameter Description:................................................................................................................610
9.503 Remove RCS Service.............................................................................................................................................611
Parameter Description:................................................................................................................611
RMV HRCSSERVICE: IMSI="460009876543210";.................................................................612
9.504 Modify RCS Service Status....................................................................................................................................612
Parameter Description:................................................................................................................612
9.505 List RCS Service....................................................................................................................................................613
Parameter Description:................................................................................................................613
LST HRCSSERVICE: IMSI="460009876543210";....................................................................613
9.506 Set an SMSC Address.............................................................................................................................................614
Parameter Description:................................................................................................................615
SET HSMSCADDR: ISDN="4600000091234", SMSCADDR="1234567890";....................615
9.507 Remove an SMSC Address....................................................................................................................................615
Parameter Description:................................................................................................................615
RMV HSMSCADDR: ISDN="4600000091234";......................................................................615
9.508 List an SMSC Address............................................................................................................................................616
Parameter Description:................................................................................................................616
LST HSMSCADDR: ISDN="4600000091234";........................................................................616
9.509 Add the AKA Information by Template.................................................................................................................616
Parameter Description:................................................................................................................617
9.510 Add an IMS Subscription by Template...................................................................................................................617
Parameter Description:................................................................................................................617
9.511 Add an IMPI by Template.......................................................................................................................................618
Parameter Description:................................................................................................................619
9.512 Add an IMPU by Template.....................................................................................................................................619
Parameter Description:................................................................................................................619
9.513 Add a PSI User by Template...................................................................................................................................620
Parameter Description:................................................................................................................620
9.514 Add a PUSI by Template........................................................................................................................................621
Parameter Description:................................................................................................................621
9.515 Add an iFC by Template.........................................................................................................................................622
Parameter Description:................................................................................................................622
9.516 Add an IMS Subscriber Using a Template.............................................................................................................623
Parameter Description:................................................................................................................623
9.517 Set Emergency Service Routing Numbers in Batches............................................................................................624
Parameter Description:................................................................................................................624
9.518 Modify Shared iFC Sets in Batches........................................................................................................................625
Parameter Description:................................................................................................................625
9.519 Remove IMS Subscription in Batches....................................................................................................................626
Parameter Description:................................................................................................................626
9.520 Remove the SIP Digest Authentication Information of IMPI in Batches...............................................................627
Parameter Description:................................................................................................................627
9.521 Modifying the M2MCISDN Service......................................................................................................................628
Parameter Description:................................................................................................................628
Output.............................................................................................................................................628
9.522 Listing the M2MCISDN Service............................................................................................................................629
Parameter Description:................................................................................................................629
LST M2MCISDN: IMSI="460000009012345";..........................................................................629
Output.............................................................................................................................................629
9.523 Modify the ODB-POS Service for EPS Subscribers..............................................................................................629
Parameter Description:................................................................................................................629
MOD EPSODB: IMSI="461111111111111", EPSODBPOS=BAPOS;..................................630
Output.............................................................................................................................................630
9.524 List the ODB-POS Service for EPS Subscribers....................................................................................................630
Parameter Description:................................................................................................................631
LST EPSODB="460000009012345";............................................................................................631
Output.............................................................................................................................................631
9.525 Provide or Withdraw MAP Address Restriction Template for Subscribers............................................................631
Parameter Description:................................................................................................................631
MOD MAPADDRRES: IMSI="460000009123456", PROV=TRUE, TPLID=4;..................632
Output.............................................................................................................................................632
9.526 List MAP Address Restriction Template of Subscribers........................................................................................632
Parameter Description:................................................................................................................632
LST MAPADDRRES: IMSI="460000009123456";...................................................................632
Output.............................................................................................................................................632
9.527 Modify the STE Service.........................................................................................................................................633
Parameter Description:................................................................................................................633
MOD STE: IMSI="460000009123456", STE_PROV =TRUE, GMLC_ADD="12345";.......633
9.528 List the STE Service...............................................................................................................................................633
Parameter Description:................................................................................................................634
LST STE: IMSI="460000009123456";..........................................................................................634
9.529 Modify the Preferred Roaming Service for Subscribers........................................................................................634
Parameter Description:................................................................................................................634
Output.............................................................................................................................................635
9.530 List the Preferred Roaming Service of Subscribers...............................................................................................635
Parameter Description:................................................................................................................635
LST TPLROAMPER: IMSI="460000009123456";.....................................................................635
Output.............................................................................................................................................635
9.531 Modify the SPN Service.........................................................................................................................................636
Parameter Description:................................................................................................................636
Output.............................................................................................................................................636
9.532 List the SPN Service...............................................................................................................................................637
Parameter Description:................................................................................................................637
LST SPN: IMSI="460000009123456";.........................................................................................637
Output.............................................................................................................................................637
9.533 Add an AS Host Name............................................................................................................................................637
Parameter Description:................................................................................................................638
Output.............................................................................................................................................638
9.534 Remove an AS Host Name.....................................................................................................................................638
Parameter Description:................................................................................................................638
RMV HASHOST:ASID=1;.........................................................................................................639
Output.............................................................................................................................................639
9.535 List an AS Host Name............................................................................................................................................639
Parameter Description:................................................................................................................639
LST HASHOST:ASID=1;............................................................................................................639
Output.............................................................................................................................................639
9.536 Modify the NT-U-CSI Service...............................................................................................................................640
Parameter Description:................................................................................................................640
Parameter Description:................................................................................................................641
LST SPN: IMSI="460000009012345";.........................................................................................641
9.538 Modify the VMCC Service....................................................................................................................................641
Parameter Description:................................................................................................................641
MOD VMCC: IMSI="460000009012345", VMCC=TRUE;.....................................................642
Response........................................................................................................................................642
9.539 List the VMCC Service..........................................................................................................................................642
Parameter Description:................................................................................................................642
LST VMCC: IMSI="460000009012345";....................................................................................642
Response........................................................................................................................................642
9.540 Modify the DND Service........................................................................................................................................642
Parameter Description:................................................................................................................643
MOD DND: IMSI="460000009012345", PROV=TRUE;.........................................................643
Response........................................................................................................................................643
9.541 List the DND Service.............................................................................................................................................643
Parameter Description:................................................................................................................643
LST DND: IMSI="460000009012345";.......................................................................................643
Response........................................................................................................................................643
9.542 Set SIP FTN Suffix.................................................................................................................................................644
Parameter Description:................................................................................................................644
9.543 List SIP FTN Suffix................................................................................................................................................644
LST HCFFTNPOSTFIX:;.............................................................................................................645
SIPFORMATPOSTFIX................................................................................................................645
9.544 List PUR Updated Repository Data.......................................................................................................................645
Parameter Description:................................................................................................................645
9.545 Set PUR Updated Repository Data.........................................................................................................................646
Parameter Description:................................................................................................................646
1. SET HPURREPDATA: IMPU="sip:impuinfo1@huawei.com", REPDATA="<?xml
version\="1.0"?><Sh-
Data><RepositoryData><ServiceIndication>3</ServiceIndication><SequenceNumber>
0</SequenceNumber><ServiceData></ServiceData></RepositoryData></Sh-Data>",
REPTYPE=ALIASREPDATA, AS="as1.huawei.com";..........................................................647
2. SET HPURREPDATA: STARTTIME=2016&05&31&09&00&00,
ENDTIME=2016&06&01&09&00&00;......................................................................................647
9.546 Send Simulated PNR Message...............................................................................................................................647
Parameter Description:................................................................................................................648
1. SND HPNR: IMPU="sip:impuinfo1@huawei.com", AS="123",
DATAREF=RepositoryData;......................................................................................................648
3. SND HPNR: IMPU="sip:impuinfo1@huawei.com", AS="as1.huawei.com",
DATAREF=RepositoryData, CHECKEXIST=FALSE, SERVICEID="10";........................648
SUCCESS0001:Operation is successful....................................................................................648
10 Common Enumerations..........................................................................................................650
10.1 TSCODE (Telecommunication Service Code) Enumeration...................................................................................650
10.2 BSG (Basic Service Group for all Supplementary) Enumeration............................................................................650
10.3 CBBSG (Basic Service Group for Call Barring) Enumeration................................................................................651
10.4 CFBSG (Basic Service Group for Call Forwarding) Enumeration..........................................................................651
10.5 CWBSG (Basic Service Group for Call Waiting) Enumeration...............................................................................651
10.6 BSCODE (Bearer Service Code) Enumeration........................................................................................................652
10.7 BASCODE (Basic Service Code) Enumeration.......................................................................................................653
10.8 DSCODE (Data Service Code) Enumeration...........................................................................................................654
10.9 CAMEL Phase Enumeration....................................................................................................................................655
10.10 TSCODE and DSCODE Enumeration...................................................................................................................655
10.11 Basic Service Code Enumeration...........................................................................................................................656
10.12 ODB (Operator Determined Barring) Enumeration...............................................................................................659
ODBBIC..........................................................................................................................................659
ODBBOC........................................................................................................................................659
ODBROAM...................................................................................................................................660
10.13 NAM (Network Access Mode) Enumeration.........................................................................................................660
10.14 SMDP (Short Message Delivery Path) Enumeration.............................................................................................660
10.15 CSITYPE (CAMEL Subscription Information Type) Enumeration......................................................................661
10.16 SERVICE_PROPERTY (Service Property Enumeration List for Called Number Analysis) Enumeration...........661
10.17 Priority Locate Flag (PLF) Enumeration................................................................................................................661
10.18 Privacy Exception1-SS Code (LCSPCODE) Enumeration....................................................................................662
10.19 Privacy Exception1-SS Status (LCSSTATUS) Enumeration.................................................................................662
10.20 Privacy Exception1-NotificationToMsUser (LCSNOTIFY) Enumeration............................................................662
10.21 PrivacyException1-ExceptionClientList1-GMLC-Restrict(LCSPGMLCR) Enumeration...................................663
10.22 Privacy Exception1-PlmnClientList (LCSPLMNCL) Enumeration......................................................................663
10.23 Mobile Originated Location Request Supplementary Service Code (LCSMOLRCODE) Enumeration...............664
10.24 Mobile Originated Location Request Supplementary Service Status (LCSMOLRSTATUS) Enumeration..........664
10.25 Category Enumeration............................................................................................................................................664
10.26 GPRS QoS Enumeration Value for GPRS_BIT_RATE.........................................................................................665
10.27 GPRS QoS Enumeration Value for GPRS_EXT_BIT_RATE...............................................................................674
10.28 GPRS QoS Enumeration Value for GPRS_MEAN_THROUGHPUT...................................................................682
10.29 GPRS QoS Enumeration Value for GPRS_PEAK_THROUGHPUT....................................................................683
10.30 GPRS QoS Enumeration Value for GPRS_SDU_SIZE.........................................................................................684
10.31 GPRS QoS Enumeration Value for GPRS_RESIDUAL_BER..............................................................................689
10.32 GPRS QoS Enumeration Value for GPRS_SDU_ERROR_RATE........................................................................689
10.33 GPRS QoS Enumeration Value for GPRS_TRANSFER_DELAY........................................................................690
10.34 Authentication Algorithm Type Enumeration Value for AUTH_ALOGRITHM...................................................692
10.35 Advice of Charge Service Enumeration Value for AOC_ENU..............................................................................692
10.36 CUG Intra-Restriction Enumeration Value for INTRACUG_OPTION.................................................................693
10.37 CUG Inter-Restriction Enumeration Value for INTERCUG_RESTRICTION......................................................693
10.38 PLMN Client Enumeration Value for PLMN_CLIENT_LIST..............................................................................693
10.39 CBCODE (CB Service Code) Enumeration...........................................................................................................694
10.40 ODBPLMNCODE (ODBPLMN Service Code) Enumeration..............................................................................694
10.41 PLMN-SS-CODE (PLMN Specific-SS Code) Enumeration.................................................................................694
10.42 ODBPOS Enumeration...........................................................................................................................................695
10.43 ODBPOSTYPE Enumeration.................................................................................................................................695
10.44 DEFAULTCALL Enumeration...............................................................................................................................696
10.45 OPTIONTYPE (M2M Binding Operation Type)Enumeration..............................................................................697
10.46 GPRSOPTYPE (Operation Type of MOD OPTGPRS) Enumeration....................................................................697
10.47 APN_TYPE (APN Type of MOD OPTGPRS) Enumeration.................................................................................697
10.48 PDPTYPE (Data Service Type of MOD OPTGPRS) Enumeration.......................................................................698
10.49 DP (DP Value) Enumeration...................................................................................................................................698
10.50 NONARD (Restriction on Non-3GPP Wireless Access) Enumeration..................................................................698
10.51 MIP6FEAVEC (Mobile IP support of NONSUB) Enumeration............................................................................699
10.52 MSIMTYPE (GROUPSIM Type of MOD GROUPSIM) Enumeration................................................................699
10.53 TONETYPE (Tone Type of MOD GROUPSIM) Enumeration.............................................................................699
10.54 CONTENT (Content of LST DYNSUB) Enumeration..........................................................................................700
10.55 DEST (Destination of SND CANCELC) Enumeration.........................................................................................700
10.56 GROUPSIMOPTYPE (Operation Type of MOD GROUPSIM) Enumeration......................................................700
10.57 PRIORITY_LEVEL (PRIORITY_LEVEL of MOD OPTGPRS) Enumeration....................................................701
10.58 UserCategory (User category) Enumeration..........................................................................................................701
10.59 GTYPE (Multi-number user group) Enumeration.................................................................................................701
10.60 TCR (Terminating call right) Enumeration............................................................................................................701
10.61 MSIMTYPE (Multi-SIM service type) Enumeration.............................................................................................702
10.62 CAMELTYPE (CAMEL type) Enumeration.........................................................................................................702
10.63 PROV (Operation) Enumeration............................................................................................................................702
10.64 OCSIDP (O-CSI DP value) Enumeration...............................................................................................................702
10.65 TCSIDP (T-CSI DP value) Enumeration................................................................................................................703
12 Abbreviations:...........................................................................................................................731
1 Change History
LUCSI commands.
Modified the REG CFB, REG CFNRC, REG CFNRY, REG
CFU, LST SUB, and LST DYNSUB commands.
2012-07-17 HSS9860 Added the MOD GROUPSIM, MOD GROUPUSER, and LST
V900R008C00B050 GROUPSIM commands.
Added the following error codes:
ERR3349:MEMBERISDN parameter repeated
ERR3350:The short message service (SMS)activation isdn must
be a member isdn
ERR3351:The voice activation isdn must be a member isdn
2012-07-28 HSS9860 Added the RMV CHANGEDISDN command.
V900R008C00B060 Modified the commands MOD NAM, LST NAM, and LST SUB.
2012-08-02 HSS9860 Modified the command ADD/LST SUB.
V900R008C00B060
2012-08-03 HSS9860 V900R008C00 Added the MOD PLMNRSZI, LST PLMNRSZI, MOD STNSR,
LST STNSR, MOD EPSAPNOI, LST EPSAPNOI, MOD
EPSAMBR, LST EPSAMBR, MOD RFPRID, LST RFPRID,
MOD DIAMRRS, and LST DIAMRRS commands.
Modified the ADD SUB, LST SUB, LST DYNSUB, MOD LCK,
LST LCK, MOD ARD, LST ARD, MODOPTGPRS, LST
OPTGPRS, ADD TPLSUB, and MOD TPLOPTGPRS
commands.
2012-08-10 HSS9860 V900R008C00 Modified the LST ANCHOR and LST ICSIND commands.
Added the IMSI and ISDN parameters to the above commands in
return reports.
2012-10-14 HSS9860 Add the USERCATEGORY parameter to the ADD SUB
V900R008C00SPC100 command.
Modified the SKEY parameter of the MOD NSMSIN command.
Added the MOD USERCATEGORY and LST
USERCATEGORY commands.
Added the following error codes:
ERR4010: Number of M2M static subscribers exceeds the
maximum
ERR4011: Number of M2M dynamic subscribers exceeds the
maximum
2012-12-03 HSS9860 V900R008C01 Modified the commands MOD MNUG, LST MNUG, and MOD
COMISDN.
Added the MOD MSIM and LST MSIM commands
Added the following error codes:
ERR3076: Request own MSISDN not possible
ERR3335: Forbid removing the primary subscriber in a Multi-
SIM group
2014-05-30 HSS9860 V900R008C50 Modified the commands MOD EPS, LST EPS, LST SUB, ADD
SUB, and ADD CSPSSUB.
Added the commands MOD VOLTETAG and LST VOLTETAG.
2014-07-15 HSS9860 V900R008C51 Modified the commands MOD GPRS, LST GPRS, and LST SUB.
Added the commands MOD PSAPNOI and LST PSAPNOI.
2014-08-07 HSS9860 V900R008C51 Modified the commands MOD VSRR, ADD SUB, ADD KI,
MOD CARDPARA, MOD GPRS, MOD OPTGPRS, MOD
CSISTATE, and
ADD CKI.
Modified TSCODE and DSCODE enumerations.
2014-08-12 HSS9860 V900R008C51 Modified the command GET TERMSTATE.
2014-08-23 HSS9860 Modified the command MOD LCK.
V900R008C51
2014-09-28 HSS9860 V900R008C51 Modified the commands LST SUB and LST DYNSUB:
Added the UNKNOWN enumeration value in the IMS-VO-PS-
Sessions-Supported parameter of the above commands in the
return reports
2014-10-23 HSS9860 V900R008C50 Added PGW MML Command Protocol of IMS and its Error Codes.
Added the error code:
ERR4052:Home HLRSN must be specified
2014-11-06 HSS9860 V900R008C50 Modified the format of ADD SUB command and the range of
AMFSNO parameter in ADD CKI command.
Added the PROPERTY parameter to the ADD CKI command, and
added the Category enumeration to the MOD CATEGORY
command
2014-11-07 HSS9860 Modified the command SET HREPDATA.
V900R008C50
2014-11-07 HSS9860 Added description of query result, and modified IMS description of
V900R008C50 query result.
Added abbreviations of IMPI, IMPU, PISI, PUSI, and AS.
Deleted repeated abbreviations of MML, HLR, and OMC.
2014-11-12 HSS9860 Modified the parameter description of LST HREPDATA.
V900R008C50
2014-11-17 HSS9860 Modified commands MOD STNSR, LST STNSR, MOD
V900R008C50 VOLTETAG, and LST VOLTETAG.
Modified the description of the above commands.
2014-11-17 HSS9860 Added the SYSNO parameter to the commands ADD HPSI, LST
V900R008C50 HPSI, and ADD HTPLPSI.
2014-11-17 HSS9860 Modified the range and description of parameter REALM in IMS
V900R008C50 commands which contain the parameter.
2014-11-18 HSS9860 Modified the range of parameter AMFSNO in commands ADD KI,
V900R008C50 MOD CARDPARA, and ADD CKI.
2014-11-24 HSS9860 Put the last part of chapter 9 and the first part of chapter 10 into
V900R008C50 different pages
Multi-IMSI service.
ERR4057:Service Conflict. The subscriber has subscribed to the
Multi-SIM service.
ERR4058:Service Conflict. The subscriber has subscribed to the
COMISDN service.
ERR4059:Service Conflict. The subscriber has subscribed to the
GROUPSIM service.
ERR4060:Service Conflict. The subscriber has subscribed to the
multi-MSISDN multi-profile service.
ERR4061:Service Conflict. The subscriber has subscribed to the
ALS service.
ERR4062:Service Conflict. The subscriber has subscribed to the
FM service.
ERR4063:Service Conflict. The IMSI and MSISDN are the same
2015-01-22 HSS9860 Modified the LST SUB and LST DYNSUB commands.
V900R009C00 Added parameters CS-MSISDN-LESS and PS-MSISDN-LESS to
the above commands in return reports.
Modified the GET TERMSTATE command.
Added the parameter CISDN to the above command in return
reports.
2015-02-02 HSS9860 Added the following error code:
V900R009C00 ERR4065: Forwarded-to number and Property of FTN cannot be
specified for the current forwarding mode
2015-02-09 HSS9860 Modified the command SET MULTISDN:
V900R009C00 Added the parameter SER_TYPE to the above command.
Added the error code:
ERR4066:Service types for the same main MSISDN are different
2015-02-11 HSS9860 V900R009C00 Modified the command LST SUB:
Added parameters EPSLOCK, NON3GPPLOCK, CSUPLLCK
and PSUPLLCK to the above commands in return reports.
2015-02-12 HSS9860 V900R009C00 Modified the command LST HASSUBDATA:
Added the parameter IMPI to the above commands in return
reports.
2015-02-25 HSS9860 V900R009C00 Modified the command MOD PLMNRSZI:
Added the parameter TYPE to the above command.
Modified the commands ADD SUB and MOD EPS:
Added the parameter SWXPLMNTPLID to the above commands.
Added the parameter SWXPLMNTPLID to LST PLMNRSZI,
LST SUB, and LST EPS commands in return reports.
2015-02-25 HSS9860 V900R009C00 Added parameters CSRATTYPE and PSRATTYPE to LST SUB
and LST DYNSUB commands in return reports.
command.
Modified the command LST SUB:
Added parameters MAPADDRRESTPLID and
MAPADDRRESTPLNAME to the above commands in return
reports.
Added the MOD MAPADDRRES and LST MAPADDRRES
commands.
2015-05-11 HSS9860 Modified the commands ADD SUB, ADD TPLUSCSUB, LST
V900R009C00 SUB, ADD SUBTPL, MOD SUBTPL, LST SUBTPL, MOD
EPS, LST EPS, MOD ANCHOR, and LST ANCHOR: Modified
the values of the parameter ANCHOR to enumeration values.
2015-05-15 HSS9860 Modified the command LST SUB:
V900R009C00 Added the parameter Server-Assignment-Time to the above
commands in return reports.
2015-05-16 HSS9860 Modified the commands LST SUB and LST DYNSUB.
V900R009C00 Added enumeration values to the parameters CSRATTYPE and
PSRATTYPE to the above commands in return reports.
2015-05-27 HSS9860 V900R009C00 Modified the command MOD COMISDN:
Added the parameter ACTMT to the above command.
2015-06-11 HSS9860 Modified the command ADD SUB:
V900R009C00 Added the parameter ARBT to the above command.
Modified the command LST SUB:
Added the parameter ARBTIndex to the above command in return
reports.
2015-06-011 HSS9860 V900R009C00 Modified the command MOD COMISDN:
Added the parameter ACTMT to the above command.
2015-06-11 HSS9860 V900R009C00 Modified the command MOD OPTGPRS:
Added parameters PROVAPNOI and APNOITPLID to the above
command.
Modified the commands LST OPTGPRS and LST SUB:
Added the parameter APNOITPLID to the above commands in
return reports
2015-06-18 HSS9860 V900R009C00 Modified the command LST ISDN:
When the value of SER_TYPE is set to OCMN, the parameter:
SER_TYPE is added to the above command in return reports.
2015-07-16 HSS9860 V900R009C00 Modified the command MOD NAEA:
Added the parameter: NAEATYPE to the above command.
Modified the command LST NAEA:
Added the parameter NAEA_TYPE to the above command in
return reports.
2015-07-16 HSS9860 V900R009C00 Modified the commands MOD ODBOC, MOD ODBIC, MOD
ODBROAM, and LST ODBDAT.
2015-07-21 HSS9860 V900R009C00 Modified the command ADD CKI.
Added the error code:
ERR4074:If the MSISDN specified does not exist in the HSS, the
HSS cannot distribute the subscriber to a service partition based on
the license balancing policy in the one-logical deployment
2015-07-31 HSS9860 V900R009C00 Modified the command LST ODBDAT:
Added parameters RECORDCOUNT, IMSIFILE, and
ISDNFILE to the above command.
Added parameters ODBENTEROAM and ODBINFOROAM to
the above commands in return reports.
2015-09-14 HSS9860 V900R009C00 Modified the command ADD SUB:
Added parameters STE_PROV, STE, GMLC_ADD to the above
command.
Modified the command LST SUB.
Added parameters: STE, GMLC_ADD, SPN to the above
command in return reports
Added the MOD STE, LST STE, MOD SPN, and LST SPN
commands.
2015-11-12 HSS9860 V900R010C00 Modified the command LST DYNSUB:
Added the parameter EPSFEATURELISTDETAIL to the above
command.
Added MME-FeatureList2 and S4SGSN-FeatureList2 to the
above command in return reports
FeatureList report is added to LST DYNSUB.
Added the commands ADD HASHOST, RMV HASHOST, and
LST HASHOST.
Added the following error codes:
900003493: The AS ID already exists
900003494: The host name already exists
900003495: The AS information does not exist
900003496: The number of AS records has reached the maximum
limit
2015-11-20 HSS9860 V900R009C10 Modified the command ADD HHSSSUB:
Added the enumeration AKA to the parameters IMPIAUTHTYPE
and IMPI2AUTHTYPE.
Added the following error codes:
900003497: Authentication information of IMPI2 does not exist
900003498: Other authentication schemes have been provided for
the IMPI
900003499: Other authentication schemes have been provided for
IMPI2
900003500: ADD HHSSSUB failed to add a convergent 2G/3G/4G
subscriber to use AKA for authenticating IMPI
900003501: ADD HHSSSUB failed to add a convergent 2G/3G/4G
subscriber to use AKA for authenticating IMPI2
2015-11-30 HSS9860 V900R009C10 Modified the command SND CANCELC:
Added the parameter CLRCSDYNDATA to the above command.
2015-11-30 HSS9860 V900R009C10 Modified the commands MOD ODBOC, MOD ODBIC, and LST
ODBDAT.
2015-12-02 HSS9860 V900R009C10 Extended the maximum value of PRIORITY and NEWPRI from
1024 to 65535 in the commands ADD HIFC, MOD HIFC, RMV
HIFC, and LST HIFC.
2015-12-02 HSS9860 V900R009C10 Added the "GROUP: Resend Information" to the LST DYNSUB
command output.
2015-12-03 HSS9860 V900R009C10 Modified the NOTE description of the command ADD HHSSSUB.
2015-12-08 HSS9860 V900R009C10 Added the following error codes:
ERR900003477: The auxiliary subscriber must be a VoLTE or
VoWiFi subscriber
ERR900003478: IMPUs associated with the main card do not
belong to any IRS
ERR900003479: IMPUs associated with the main card do not
belong to any alias set
ERR900003480: IMPUs associated with the main card do not share
any service profile
ERR900003481: IMPUs associated with the main card do not
belong to the same IRS
ERR900003482: IMPUs associated with the main card do not
belong to the same alias set
ERR900003483: IMPUs associated with the main card do not share
the same service profile
ERR900003485: The authentication status of synchronized CS
domain repository data cannot be changed
ERR900003484: PECF and PCCF addresses cannot be
simultaneously removed from a charging template
ERR900003486: Either a PECF or PCCF address must exist in the
charging template
ERR900003487: The partition information about the subscriber
cannot be obtained in IMS-HSS
ERR900003488: The command output exceeds the maximum
length allowed
ERR900003489: The password length does not meet password
strength requirements
ERR900003490: The password cannot contain a user name
2 Overview
Figure 1.1 Relationship between the provisioning system client and the PGW
The number of the connections between the PGW and the provisioning system client is limited. A PGW
supports at most 100 provisioning system clients. A board supports at most six PGWs. So a board
supports at most 600 provisioning system clients.
Figure 1.2 shows the connection between the provisioning system clients (client A and client
B) and the PGW. Client A and the PGW are in the same network. Client B and the PGW are
in different networks with a gateway connecting them. The provisioning system clients
communicate with the PGW over TCP/IP.
In addition, there are three Web UIs in Figure 1.2. The Web UI provides a graphical man-
machine interface for the communication between the operators and the HSS9860. Based on
the Windows operating system, it manages and maintains the HLR system using the Internet
Explorer. Certain commands, such as adding a provisioning system user and setting a
subscription template, must be configured on the Web UI.
2.3 Terms
Provisioning System Interface
The provisioning system interface is string command lines which are supported by Huawei
HSS9860. These command lines can implement functions such as defining or removing a
subscriber, and querying or modifying subscription data.
Provisioning System Client
The provisioning system client is the BOSS provided by the third-party software suppliers.
The provisioning system client must send connection requests to the PGW and maintain
connection with the PGW using handshake messages. It manages the subscriber data stored in
the HLR through the provisioning system interface.
Web UI
The Web UI provides a graphical man-machine interface for the communication between the
operators and the HSS9860. Based on the Windows operating system, it manages and
maintains the HLR system using the Internet Explorer. Certain commands, such as adding a
provisioning system user and setting a subscription template, must be configured on the Web
UI.
PGW
The PGW is connected to the provisioning system client and the Web UI. It processes the
commands sent from the provisioning system client and the Web UI and returns the result to
them.
3 Stipulation
4 Time Setting
5 Communication Protocol
Once the provisioning system client connects to the PGW, the client can manage the
subscriber data in the HLR/HSS using the provisioning system interface commands.
The provisioning system client interface commands are command lines which are transmitted
in command strings.
The format of the command string is as follows:
Command Name: parameter 1=parameter value 1, parameter 2=parameter value 2;
6 Command Syntax
There are six types of parameters, including numeral, Boolean, string, enumeration, date and
time. The values of different types of parameters are in different forms:
String
The value of the parameter is a string consisting of the following characters:
− Uppercase letters from A to Z.
− Lowercase letters from a to z.
− Digits from 0 to 9.
− Other characters that the Windows operating system supports (key characters in the
MML commands such as ":", ",", "=", and ";" are not included.)
Numeral
The value of the parameter is an Arabic number consisting of the digits from 0 to 9.
Boolean
The value of the parameter is TRUE or FALSE.
Enumeration
The values of the parameter are enumerated names or values. (The enumerated name and
enumerated value is interchangeable in the command line. For example: enumerated
name TRUE and FALSE can be interchanged with 1 and 0.)
Date
The value of the parameter is in the YYYY-MM-DD (or YYYY&MM&DD) format. Put
a zero in front of the month and the day if the month and the day are one-digit numbers.
Time
The value of the parameter is in the HH:MM:SS or HH:MM (or HH&MM&SS or
HH&MM) format. Put a zero in front of the hour, the minute and the second if they are
one-digit numbers.
The format of the date with time must be YYYY-MM-DD HH:MM:SS (or
YYYY&MM&DD&HH&MM&SS).
7 Command Output
The PGW will return an output of the command to the provisioning system after processing
each command, no matter whether the execution succeeds or fails. The output is classified
into three types of messages: success message, error message, and querying result.
The error code rules are as follows:
Success message: The error codes must be SUCCESS0001, SUCCESS0002,
SUCCESS0003, SUCCESS0004, SUCCESS0005, SUCCESS0006, SUCCESS0007,
SUCCESS0008, SUCCESS0009, SUCCESS0010, or SUCCESS0011.
Error message: When the provisioning system matches error messages, only the prefix
ERR is matched, while the specific error code and the description of error code are not
matched. This avoids BOSS modifying commands or upgrading itself while the
HLR/HSS adds or modifies error codes. If an error message does not contain the prefix
ERR, the provisioning system searches for the RETCODE. Error codes contain four
digits or nine digits. The nine-digit error codes begin with the number nine.
<message details>
--- END
Example:
+++ HLR9820 2003-11-21 08:54:14
SMU #000324
%%LGI:OPNAME="admin", PWD="*****";%%
SUCCESS0001:Operation is successful
--- END
<message details>
--- END
or
+++ USCDB <date> <time>
PGW #<serial number>
%%<command string>%%
RETCODE=<error code> <message description>
<message details>
--- END
Example:
+++ USCDB 2011-01-28 17:02:52
PGW #002492
%%SET MAPSERV: CFNRTIME=30, MAXTIMECALLFWD=5;%%
RETCODE=0 SUCCESS0001:Operation is successful
--- END
or
--- END
or
+++ USCDB 2014-11-25 10:45:04
PGW #000503
%%CHK HKI: IMPI="impiinfo", K="*****";%%
RETCODE=900001007 The value is invalid. <"******"> for <"K">
--- END
3. Horizontal format (Each pair of parameter name and parameter value occupies two
lines.)
As for the query command, the output format is as follows:
parameter 1 parameter 2 ...
result 1 result 2 ...
For example, the output for the command LST HSUBINFO: SUBID="6290000001"is as
follows:
+++ USCDB 2014-11-07 18:22:36
PGW #014973
%%LST HSUBINFO: SUBID="6290000001";%%
RETCODE=0 SUCCESS0001:Operation is successful
SUBID SUBINFO
6290000001
Total count=1
--- END
Some LST command outputs described in 9Summary of Commands are displayed in horizontal format.
Because all the parameters cannot be displayed in one line (the actual format), the parameters are
displayed in several lines. You can read the output from the left to the right, from the top to the bottom,
and from the first line to the last line.
4. Mixed format (Mixed format output)
1) Mixed format 1 (The output is displayed first in vertical format and then in horizontal
format.)
As for the query command, the format of the output is as follows:
{parameter 1}=< result 1>
SUBID=subinfo
IMSI MASTERFLAG
1234567891 1
1234567892 0
1234567893 0
1234567894 0
1234567895 0
Total count=6
--- END
2) Mixed format 2 (The output is displayed first in horizontal format and then in vertical
format.)
As for the query command, the format of the output is as follows:
parameter 1 result 1
parameter 2 parameter 3 ...
result 2 result 3 ...
For example, the output for the command LST HSTDPRIOR:
IMPU="sip:impuinfo@huawei.com" is as follows:
+++ USCDB 2014-11-07 18:19:42
PGW #014949
%%LST HSTDPRIOR: IMPU="sip:impuinfo@huawei.com";%%
RETCODE=0 SUCCESS0001:Operation is successful
STDPRIOR
2
Total count=2
8 Key Parameters
According to the preceding description, pay attention to the following information when
setting up the communication between the provisioning system and the PGW:
The PGW opens the TCP port (For a specific port number, run the LST PORT command
with Service type of port set to GU-HLR on the USCDB MML Command Interface of
the OMU client).
The IP addresses of the PGW may vary with the sites.
The provisioning system client must send the connection request to the PGW. If the
connection between the provisioning system client and the PGW is interrupted for some
reasons, the provisioning system client must send the connection request again to the
PGW.
The provisioning system client must send handshake messages to the PGW within the
maximum handshake duration of the PGW on a regular basis. The time interval between
the handshake messages can be set to 20 seconds.
The provisioning system client regards that the command fails if the client does not
receive the response from the PGW within 60 seconds.
The number of connections established between the PGW and the provisioning system
client is limited. A PGW supports at most 100 provisioning system clients. A board
supports at most six PGWs. So a board supports at most 600 provisioning system clients.
The PGW processes the requests in serial mode. The PGW will process a command sent
from the provisioning system only after the PGW finishes processing the previous
command.
Service provisioning requests to be delivered at the same time for a subscriber must be
sent through the same TCP connection. A TCP connection connects the provisioning
system and the PGW, or connects the PGW Web LMT and the PGW.
9 Summary of Commands
Example:
LGI: HLRSN=2, OPNAME="NKR", PWD="*****";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The password cannot be null, and its value is a string of 6 to 10 characters. The values of parameters
OPNAME and PWD cannot contain the following characters: colon (:), semicolon (;), double
quotation mark ("), percent sign (%), single quotation mark ('), square brackets ([]), equal mark (=),
and comma (,). The operator name and the password must be set through the PGW.
The LGI command is the first command to run after a provisioning system connects to the PGW.
The parameters OPNAME and PWD must be set through the Web UI in the first place. The user
name and password are used for the provisioning system client to connect to the HSS9860.
Various data access rights can be set for operators through the Web UI.
The parameter HLRSN is not specified or is set to the default value 255 if the PGW is a standalone
version. The parameter HLRSN must be specified if the PGW is a redundancy version. In this case,
this parameter does not have a default value.
Example:
ADD TPLSUB: HLRSN=2, IMSI="345612789012345", ISDN="013623456789", TPLID=4,
LINE2NUM="555555555555555";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For the meaning of error codes, see
11"Summary of Error Codes."
The parameter HLRSN is not specified or is set to the default value 255 if the PGW is a standalone
version. The parameter HLRSN must be specified if the PGW is a redundancy version. In this case, this
parameter does not have a default value.
Parameter Description:
Example:
RMV SUB: ISDN="13623456789", RMVKI=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST SUB: IMSI="955678112", DETAIL=TRUE;
Output:
If the operation succeeds, the system displays an output with the following format:
{HLRSN}=<HLR Serial No in the redundant HLR center>
{IMSI}= <IMSI Number>
{ISDN}=<MSISDN Number>
{ISDN}=<MSISDN Number For Line2 of Alternative Line Service>
{IMEI}=<IMEI number>
"Session Transfer Number for SRVCC"
{STNSR}=<Session Transfer Number for Single Radio Voice Call Continuity>
"LU CSI template"
LUCSI_TPL_ID=<Template ID>
{ICS-Indicator}=<TRUE|FALSE>
{ANCHOR-Indicator}=<TRUE | FALSE | SELECTIVE | TCSI | PRE_FALSE
| PRE_TRUE>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI2}=<IMSI Number 2>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI3}=<IMSI Number 3>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI4}=<IMSI Number 4>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI5}=<IMSI Number 5>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI6}=<IMSI Number 6>
{CALL_INDEX}=<1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI7}=<IMSI Number 7>
{CALL_INDEX}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{CLIR}=<"PROV"|"NOTPROV">
{COLP}=<"PROV"|"NOTPROV">
{COLR}=<"PROV"|"NOTPROV">
{ECT}=<"PROV"|"NOTPROV">
{CW}=<"PROV"|"NOTPROV">
{HOLD}=<"PROV"|"NOTPROV">
{MPTY}=<"PROV"|"NOTPROV">
{MC}=<NOTPROV|PROV>
{NBRSB}=<Maximum of MC attempts allowed>
{NBRUSER}=<User determined maximum MC attempts>
{AOCI}=<"PROV"|"NOTPROV">
{AOCC}=<"PROV"|"NOTPROV">
{CUG}=<"PROV"|"NOTPROV">
{UUS1}=<"PROV"|"NOTPROV">
{UUS2}=<"PROV"|"NOTPROV">
{UUS3}=<"PROV"|"NOTPROV">
{SMSCF}=<"PROV"|"NOTPROV">
{SMSCF_OFATPL}=<SMSCF OFA template ID>
{SMSCFFTN}=<SMSCF Forward to Number>
{plmn-specificSS-1}=<"PROV"|"NOTPROV">
{plmn-specificSS-2}=<"PROV"|"NOTPROV">
{plmn-specificSS-3}=<"PROV"|"NOTPROV">
{plmn-specificSS-4}=<"PROV"|"NOTPROV">
{plmn-specificSS-5}=<"PROV"|"NOTPROV">
{plmn-specificSS-6}=<"PROV"|"NOTPROV">
{plmn-specificSS-7}=<"PROV"|"NOTPROV">
{plmn-specificSS-8}=<"PROV"|"NOTPROV">
{plmn-specificSS-9}=<"PROV"|"NOTPROV">
{plmn-specificSS-A}=<"PROV"|"NOTPROV">
{plmn-specificSS-B}=<"PROV"|"NOTPROV">
{plmn-specificSS-C}=<"PROV"|"NOTPROV">
{plmn-specificSS-D}=<"PROV"|"NOTPROV">
{plmn-specificSS-E}=<"PROV"|"NOTPROV">
{plmn-specificSS-F}=<"PROV"|"NOTPROV">
{allplmn-specificSS }=<"PROV"|"NOTPROV">
{CNAP}=<"PROV"|"NOTPROV">
{CCBS}=<"PROV"|"NOTPROV">
{CCBSTARGET}=<"PROV"|"NOTPROV">
{DEFAULTOFA_ID}=<Template ID>
{ODBPREMSMS}=<TRUE|FALSE >
{ODBADULTSMS}=<TRUE|FALSE >
"O-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"T-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"VT-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"MO-SMS-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"MT-SMS-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"D-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"SS-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"M-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"GPRS-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
STATE=<Template State>
"U-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
"TIF-CSI"
TIFCSI=PROVISIONED (if present)
STATE=<Template State>
"LCS-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
"IM-O-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
" IM-VT-CSI"
TPLID=<Template ID>
TPLNAME=<Template Name>
"VLR/SGSN roaming restrict"
VLRLIST=<Template ID>
TPLNAME=<Template Name>
SGSNLIST=<Template ID>
TPLNAME=<Template Name>
"Binding OptGprsTpl"
OPTGPRSTPL=<Template ID>
"GPRS Data"
{CHARGE_GLOBAL}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{SCHARGE_GLOBAL}=<0000-FFFF>
{PSAPNOITPLID}=<0-65534>
{CNTXID}=<1>
{PDPTYPE}=<X25|PPP|OCSIHOSS|IPV4|IPV6| IPV4IPV6 | IPV4_OR_IPV6>
{PDPADD}=<PDP Address like 10.64.12.11>
{ADDIND}=<STATIC|DYNAMIC>
{RELCLS}=<SUBREL|ACKALLPRODT|ACKLLCRLCPRODT|ACKRLCPRODT|
UACKALLPRODT|UACKALLUPRODT>
{DELAYCLS}=<SUBDELAY|DELAY1|DELAY2|DELAY3|DELAY4>
{PRECLS}=<SUBPRE|HIGH|NORMAL|LOW>
{PEAKTHR}=< GPRS_PEAK_THROUGHPUT enumeration>
{MEANTHR}=< GPRS_MEAN_THROUGHPUT enumeration>
{ARPRIORITY}=<HIGH|NORMAL|LOW|>
{ERRSDU}=<SUBDEL|NODETECT|YES|NO>
{DELIVERY}=<SUBDEL|YES|NO>
{TRAFFICCLS}=<SUBCLS|CONVER|STREAM|INTERACT|BACKGRD>
{MAXSDUSIZE}=<GPRS_SDU_SIZE enumeration>
{MAXBRUPL}=<GPRS_BIT_RATE enumeration>
{MAXBRDWL}=<GPRS_BIT_RATE enumeration>
{RESBER}=<GPRS_RESIDUAL_BER enumeration>
{SDUERR}=<GPRS_SDU_ERROR_RATE enumeration>
{TRANSFERDEL}=<GPRS_TRANSFER_DELAY enumeration>
{TRAFFICPRI}=<SUBPRI|PRIORITY1|PRIORITY2|PRIORITY3>
{MAXGBRUPL}=<GPRS_BIT_RATE enumeration>
{MAXGBRDWL}=<GPRS_BIT_RATE enumeration>
{MAXEXTBRDWL}=<GPRS_EXT_BIT_RATE enumeration>
{MAXEXTGBRDWL}=<GPRS_EXT_BIT_RATE enumeration>
{MAXEXTBRUPL}=<GPRS_EXT_BIT_RATE enumeration>
{MAXEXTGBRUPL}=<GPRS_EXT_BIT_RATE enumeration >
{APN}=<Access Point Name>
{VPLMN}=<TRUE|FALSE>
{CHARGE}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{STDCHARGE}=<0000-FFFF>
{APNTPLID}=<0-65534>
{QOSTPLID}=<0-65534>
{PRIORITY_LEVEL}=<HIGH>
{APNOITPLID}=<0-65534>
{CNXTID}=<2>
...........
"EPS Data"
{CHARGE_GLOBAL}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{SCHARGE_GLOBAL}=<0000-FFFF>
{APNOI}={UE level APN Operator Identifier Replacement}
{AMBRMAXUL}={UE level Max Requested Bandwidth of Upload}
{ AMBRMAXDL}={UE level Max Requested Bandwidth of Download}
{ RATFREQSELPRIID}={RAT Frequency Selection Priority ID}
{PLMNTPLID}=<0-65534>
{DIAMNODETPL_ID}=<0-65534>
{EGR}=<PROV|NOTPROV>
{EGRHLRSN}=<1-255>{NON3GPPSUPP}=<TRUE|FALSE>
{MIP6FEAVEC}=<MIP6_INTEGRATED|PMIP6_SUPPORTED|IP4_HOA_SUPPORTED|
ASSIGN_LOCAL_IP|MIP4_SUPPORTED|GTPv2_SUPPORTED>
{SESSIONTIMEOUT}=<1-4294967295>
{ VOWIFI_TAG}=<Non_VoWIFI|VoWIFI>
{LTEAUTOPROV}=<TRUE|FALSE|AUTOTPLUSER|AUTOUSER_NN|
AUTOTPLUSER_NN|AutoLteToVolte|AutoLteToVolte_NN>
{MPS}=<TRUE|FALSE>
{ICSIND}=<TRUE|FALSE>
{ANCHOR}=<TRUE|FALSE|SELECTIVE|TCSI|PRE_FALSE|PRE_TRUE>
{VOLTETAG}=<TRUE|FALSE>
{TAUTIMER}={0-43200}
{RELAY_NODE}=<TRUE|FALSE>
{SWXPLMNTPLID}=<0-65534>
{EPSODBPOS}=<NOBPOS|BAPOS|BHPLMNAPROAM|BALLAPROAM>
{APNTPLID}=<0-65534>
{ DEFAULTAPN}=<TRUE|FALSE>{ WILDCARDAPN}=<TRUE|FALSE>
{EPSQOSTPLID}=<0-65534>
{PDPTYPE}=<X25|PPP|OCSIHOSS|IPV4|IPV6| IPV4IPV6 | IPV4_OR_IPV6>
{PDPADD}=<PDP Address>
{ADDIND}=<STATIC|DYNAMIC>
{PDPADDIPV6}=<PDP Address>
{ADDIND2}=<STATIC|DYNAMIC>
{PDPADDIPV4}=<PDP Address>
{VPLMNALLOWED}=<TRUE|FALSE>
{CHARGE}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{STDCHARGE}=<0000-FFFF>
{APNOITPLID}=<0-65534>
"PS PDP Data"
{CHARGE_GLOBAL}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{CNTXID}=<1>
{PSAPNQOSTPLID}=<0-65534>
..........."EPS PDN Data"
{CHARGE_GLOBAL}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{DEFAULTCNTXID}=<1-50>
{CNTXID}=<1>
{EPSAPNQOSTPLID}=<0-65534>
...........
"Dynamic Status Information For MME"
{MMEHOST}={MME Host Name}
{MMEREALM}={MME Realm Name}
{RATTYPE}=<WLAN|UTRAN|GERAN|GAN|HSPA_EVOLUTION|E_UTRAN|
CDMA2000_1X |HRPD|UMB>
{VPLMN}={Visited PLMN Identifier}
{PURGEDONMME}=<FALSE|TRUE>
{MME-UpdateLocation-Time}={MME Update Location Time}
{MME-FeatureList}={MME FeatureList in HEX format}
{MME-FeatureList2}={MME FeatureList2 in HEX format}
{LastIDRorDSRFailed}=<FALSE|TRUE>
{Single-Registration-Indication}=<FALSE|TRUE>
{Skip-Subscriber-Data-Indicator}=<FALSE|TRUE>
{GPRS-Subscription-Data-Indicator}=<FALSE|TRUE>
{Node-Type-Indicator}=<Single|Combined>
{Initial-Attach-Indicator}=<FALSE|TRUE>
{PS-LCS-Not-Supported-By-UE}=<FALSE|TRUE>
{IMEI}=<IMEI number>
{IMEISV}=<IMEISV number>
{IMS-VO-PS-Sessions-Supported}=<NOT_SUPPORTED|SUPPORTED|UNKNOWN>
{UE-SRVCC-Capability}=<UE-SRVCC-NOT-SUPPORTED|UE-SRVCC-SUPPORTED>
{VGMLC-MME}=<IPV4|IPV6>
"Dynamic Status Information For S4SGSN"
{SGSNHOST}={SGSN Host Name}
{SGSNREALM}={SGSN Realm Name}
{SGSNNUMBER}={SGSN GT Number}
{RATTYPE}=<WLAN|UTRAN|GERAN|GAN|HSPA_EVOLUTION|E_UTRAN|
CDMA2000_1X |HRPD|UMB>
{VPLMN}={Visited PLMN Identifier}
{PURGEDONSGSN}=<FALSE|TRUE>
{AREARESTRICT}=<FALSE|TRUE>
{S4SGSN-UpdateLocation-Time}={S4SGSN Update Location Time}
{S4SGSN-FeatureList}={S4SGSN FeatureList in HEX format}
{S4SGSN-FeatureList2}={S4SGSN FeatureList2 in HEX format}
{LastIDRorDSRFailed}=<FALSE|TRUE>
{Skip-Subscriber-Data-Indicator}=<FALSE|TRUE>
{GPRS-Subscription-Data-Indicator}=<FALSE|TRUE>
{Node-Type-Indicator}=<Single|Combined>
{Initial-Attach-Indicator}=<FALSE|TRUE>
{PS-LCS-Not-Supported-By-UE}=<FALSE|TRUE>
{IMEI}=<IMEI number>
{IMEISV}=<IMEISV number>
{IMS-VO-PS-Sessions-Supported}=<NOT_SUPPORTED|SUPPORTED>
{UE-SRVCC-Capability}=<UE-SRVCC-NOT-SUPPORTED|UE-SRVCC-SUPPORTED>
{VGMLC-SGSN}=<IPV4|IPV6>
"Dynamic Status Information For IMS"
{UE-Register-AtIMS}=<TRUE|FALSE>
{SMDP}=<MSC|SGSN>
{NAEA_CIC}=<0-9999|"NOTPROV">
{NLRInd}=<NONE|GSM|GPRS|BOTH>
{ALS}=<"PROV"|"NOTPROV">
{LINE2NUM}=<MSISDN Number For Line2 of Alternative Line Service>
{VVDN}=<"PROV"|"NOTPROV">
{RBTIndex}=<0-254|"NOTPROV">
{ARD}=<PROV|NOTPROV>
{UTRANNOTALLOWED}=<TRUE|FALSE>
{GERANNOTALLOWED}=<TRUE|FALSE>
{GANNOTALLOWED}=<TRUE|FALSE>
{IHSPAENOTALLOWED}=<TRUE|FALSE>
{EUTRANNOTALLOWED}=<TRUE|FALSE>
{N3GPPNOTALLOWED}=<TRUE|FALSE>
{WLANNOTALLOWED}=<TRUE|FALSE>
{CDMA2000_1XNOTALLOWED}=<TRUE|FALSE>
{HRPDNOTALLOWED}=<TRUE|FALSE>
{UMBNOTALLOWED}=<TRUE|FALSE>
{EHRPDNOTALLOWED}=<TRUE|FALSE>
{CARP}=<1-255|"NOTPROV">
{RROption}=<ALL_PLMNS|ONE_NPLMN_ALL_FPLMNS|ONLY_HPLMN
|RR_TEMPLATE>
{RRTPL}=<0-65534>
{RZONE}=<0-9>
{VBS}=<"PROV|"NOTPROV">
{VGCS}=<"PROV|"NOTPROV">
{EMLPP}=<"PROV"|"NOTPROV">
{EMLPP_COU}=<"SUBSCRIBER"|"OPERATOR">
{ECATEGORY}=<1-254>
{ECATOPTION}=<1-127>
{UUS1}=<"PROV"|"NOTPROV">
{UUS2}=<"PROV"|"NOTPROV">
{UUS3}=<"PROV"|"NOTPROV">
{FMInit}=<"PROV"|"NOTPROV">
{FMSupervisor}=<"PROV"|"NOTPROV">
{FMRemote}=<"PROV"|"NOTPROV">
{IST}=<NOTPROV|PROV>
{ISTTIMER}=<15…255>
{ISTRSP}=<EMPTY|NEW_ALERT_TIMER|TERMINATECALLACTIVITYREFERRED|
TERMINATEALLCALLACTIVITIES|WITHDRAW>
{DIC}=<"PROV"|"NOTPROV">
{DICLENGTH}=<Length of DIC>
{ROUTECATEGORY}=<1-255>
{CALLREDIRECT}=<0-255>
{NRBTIndex}=<INAP INDEX for National Ring Back Tone service>
{OSK}=<1-999>
{TSK}=<1-999>
{ETCSICONVER_TPLID}=<0-65534>
{EXEXROUTECATEGORY}=<1-2147483647>
{MERBT}=<PROV|NOTPROV>
{NIRPROV}=<TRUE|FALSE>
{NIRIndex}=<INDEX for NIR service>
{ACR_STATUS}=<PROV|NOTPROV|ACT>
{CPP}=<PROV|NOTPROV>
{ELCS}=<PROV|NOTPROV>
{BOSK}=<1-999>
{EOICK}=<1-999>
{CAPL}=<1-15>
{ETICK}=<1-999>
{ARBTIndex}=<1-65535>
{ STE_PROV}=<TRUE|FALSE>
{ GMLC_ADD}=<GMLC Address
{VMCC } = < TRUE|FALSE >
"Dynamic Status Information For GSM"
{VlrNum}=<VLR Number>,
{MscNum}=<MSC Number>,
{MsPurgedForNonGprs}=<TRUE|FALSE>,
{VLRInHplmn}=<TRUE|FALSE>,
{VLRInHomeContry}=<TRUE|FALSE>,
{VLRInArea}=<TRUE|FALSE>,
{RequireCheckSS}=<TURE|FALSE>,
{RoamingRestirctInMscDueToUnsupportedFeature}=<TRUE|FALSE>,
{MscOrVlrAreaRoamingRestrict}=<TRUE|FALSE>,
{ODBarredForUnsupportedCamel}=<TRUE|FALSE>,
{SupportedCamelPhase1}={TRUE|FALSE},
{SupportedCamelPhase2}={TRUE|FALSE},
{SupportedCamelPhase3}={TRUE|FALSE},
{SupportedCamelPhase4}={TRUE|FALSE},
{SRIMsrnCfActive}={TRUE|FALSE},
{ZoneCodeStatusAtMsc}=<networkNode_AreaRestricted|tooManyZoneCodes|
zoneCodesConflict|regionalSubscNotSupported|zoneCodesSupported>,
{longGroupIDSupported}={TRUE|FALSE},
{basicISTSupported}={TRUE|FALSE},
{istCommandSupported}={TRUE|FALSE},
{SuperChargerSupportedForGsm}={TRUE|FALSE},
{LMSI}=<LMSI Number>,
{ECATEGORYAtMsc}=<TRUE|FALSE>,
{CSUPLTIME}={Update Location Time},
{CSPURGETIME}={Purge Time At MSC},
{CS-MSISDN-LESS}=<TRUE|FALSE>,
{CSRATTYPE}=<UTRAN|GERAN|UTRAN&GERAN|GAN|UTRAN&GAN|
GERAN&GAN|UTRAN&GERAN&GAN|I-HSPA|UTRAN&I-HSPA|GERAN&I-HSPA|
UTRAN&GERAN&I-HSPA|GAN&I-HSPA|UTRAN&GAN&I-HSPA|GERAN&GAN&I-
HSPA|UTRAN&GERAN&GAN&I-HSPA|E-UTRAN|UTRAN&E-UTRAN|GERAN&E-
UTRAN|UTRAN&GERAN&E-UTRAN|GAN&E-UTRAN|UTRAN&GAN&E-UTRAN|
GERAN&GAN&E-UTRAN|UTRAN&GERAN&GAN&E-UTRAN|I-HSPA&E-UTRAN|
UTRAN&I-HSPA&E-UTRAN|GERAN&I-HSPA&E-UTRAN|UTRAN&GERAN&I-
HSPA&E-UTRAN|GAN&I-HSPA&E-UTRAN|UTRAN&GAN&I-HSPA&E-UTRAN|
GERAN&GAN&I-HSPA&E-UTRAN|UTRAN&GERAN&GAN&I-HSPA&E-UTRAN>,
{ CsUplStatus}=<Normal|TimeOut|Exception>,
"OfferedCAMEL4CSIsInVLR"
{O-CSI}
{D-CSI}
{VT-CSI}
{T-CSI}
{MT-SMS-CSI}
{MG-CSI}
{PSI-Enhancements}
{BaocForVlrRestrict}=<TRUE|FALSE>
"Dynamic Status information For GPRS"
{SgsnNum}=<SGSN Number>,
{SgsnAddressType}=<IPV4|IPV6>,
{SgsnAddress}=<SGSN address>,
{SgsnInHplmn}=<TRUE|FALSE>,
{MsPurgedForGprs}=<TRUE|FALSE>,
{SgsnInHomeCountry}=<TRUE|FALSE>,
{SgsnInArea}=<TRUE|FALSE>,
{RoamingRestrictInSgsnDueToUnsupportedFeature}=<TRUE|FALSE>,
{SgsnAreaRoamingRestrict}=<TRUE|FALSE>,
{ODBarredForUnsupportedCamelForGprs}=<TRUE|FALSE>,
{PSUPLTIME}={Gprs Update Location Time},
{PSPURGETIME}={Purge Time At SGSN},
{PS-MSISDN-LESS}=<TRUE|FALSE>,
{PSRATTYPE}=<UTRAN|GERAN|UTRAN&GERAN|GAN|UTRAN&GAN|
GERAN&GAN|UTRAN&GERAN&GAN|I-HSPA|UTRAN&I-HSPA|GERAN&I-HSPA|
UTRAN&GERAN&I-HSPA|GAN&I-HSPA|UTRAN&GAN&I-HSPA|GERAN&GAN&I-
HSPA|UTRAN&GERAN&GAN&I-HSPA|E-UTRAN|UTRAN&E-UTRAN|GERAN&E-
UTRAN|UTRAN&GERAN&E-UTRAN|GAN&E-UTRAN|UTRAN&GAN&E-UTRAN|
GERAN&GAN&E-UTRAN|UTRAN&GERAN&GAN&E-UTRAN|I-HSPA&E-UTRAN|
UTRAN&I-HSPA&E-UTRAN|GERAN&I-HSPA&E-UTRAN|UTRAN&GERAN&I-
HSPA&E-UTRAN|GAN&I-HSPA&E-UTRAN|UTRAN&GAN&I-HSPA&E-UTRAN|
GERAN&GAN&I-HSPA&E-UTRAN|UTRAN&GERAN&GAN&I-HSPA&E-UTRAN>,
{ PsUplStatus}=<Normal|TimeOut|Exception>,
{GgsnNumber1}={GGSN Number1},
{GgsnAddressType1}=<IPV4|IPV6>,
{GgsnAddress1}=<GGSN address>,
{GgsnNumber2}={GGSN Number2},
{GgsnAddressType2}=<IPV4|IPV6>,
{GgsnAddress2}=<GGSN address>,
{GgsnNumber3}={GGSN Number3},
{GgsnAddressType3}=<IPV4|IPV6>,
{GgsnAddress3}=<GGSN address>,
{SupportedCamelPhase3}={TRUE|FALSE},
{SupportedCamelPhase4}={TRUE|FALSE},
{SuperChargerSupportedForGprs}=<networkNode_AreaRestricted|tooManyZoneCodes|
zoneCodesConflict|regionalSubscNotSupported|zoneCodesSupported>,
{ZoneCodeStatusAtSgsn}=<networkNode_AreaRestricted|tooManyZoneCodes|
zoneCodesConflict|regionalSubscNotSupported|zoneCodesSupported>,
"OfferedCAMEL4CSIsInSGSN"
{O-CSI}=<TRUE|FALSE>
{D-CSI}=<TRUE|FALSE>
{VT-CSI}=<TRUE|FALSE>
{T-CSI}=<TRUE|FALSE>{MT-SMS-CSI}=<TRUE|FALSE>
{MG-CSI}=<TRUE|FALSE>
{PSI-Enhancements}=<TRUE|FALSE>
"Short Message Dynamic Data for GSM"
{MCEF}=<TRUE|FALSE>,
{MNRF}=<TRUE|FALSE>,
{MNRR}=<MSC Paged not response| GSM detached| No reason for non-GPRS>
"Short Message Dynamic Data for GPRS"
{MCEF}=<TRUE|FALSE>,
{MNRG}=<TRUE|FALSE>
{MNRR}=<SGSN Paged not response| GPRS detached| No reason>
{SupportedShortMessageMT-PP}=<TRUE|FALSE>
{SupportedShortMessageMO-PP}=<TRUE|FALSE>
"ShortMessage Center Information"
{SC1}={SC address1},
{SC2}={SC address2},
{SC3}={SC address3},
"ODB Supported Features For GSM"
{BarredSSAccess}=<TRUE|FALSE>,
{BarredOutgoingEntertainmentCall}=<TRUE|FALSE>,
{BarredOutgoingInformationCall}=<TRUE|FALSE>,
{BarredOutgoingInternationalCallExHC}=<TRUE|FALSE>,
{BarredOutgoingInternationalCall}=<TRUE|FALSE>,
{BarredAllOutgoingCall}=<TRUE|FALSE>,
{BarredAllECT}=<TRUE|FALSE>,
{BarredChargeableECT}=<TRUE|FALSE>,
{BarredInternationalECT}=<TRUE|FALSE>,
{BarredInterzonalECT}=<TRUE|FALSE>,
{BarredDECT}=<TRUE|FALSE>,
{BarredMECT}=<TRUE|FALSE>,
"ODB Supported Features For GPRS"
{BarredAllOutgoingCall}=<TRUE|FALSE>
{BarredOutgoingInternationalCall}=<TRUE|FALSE>
{BarredOutgoingInternationalCallExHC}=<TURE|FALSE>
{ Barring of Packet Oriented Services}=<TRUE|FALSE>
"Short Message Dynamic Data for IP"
{MCEF}=<TRUE|FALSE>
{UNRI}=<TRUE|FALSE>
{UNRR}=<deregistered in the HSS/HLR for IMS|no response via the IP-SM-GW|No reason>
{IP_SM_GW}=<the GT address of IP-SM-GW>,
"unsupported TeleService Feature"
{UnsupTS}={TS11: Telephony Service},
{UnsupTS}={TS12: Emergency Call},
{UnsupTS}={TS21: ShortMessageMT-PP}
{UnsupTS}={TS22: ShortMessageMO-PP}
{UnsupTS}={TS61: FascimileGroup3andAlterSpeech}
{UnsupTS}={TS62: autoFascimileGroup3}
"Unsupported Bearer Service Feature"
{UnsupBSFor2G}={BS20: HighSpeedBearerServiceCDA}
{UnsupBSFor2G}={BS21: dataCDA_300bps}
{UnsupBSFor2G}={BS22: dataCDA_1200bps}
{UnsupBSFor2G}={BS23: dataCDA_1200_75bps}
{UnsupBSFor2G}={BS24: dataCDA_2400bps}
{UnsupBSFor2G}={BS25: dataCDA_4800bps}
{UnsupBSFor2G}={BS26: dataCDA_9600bps}
{UnsupBSFor2G}={BS30: HighSpeedBearerServiceCDS}
{UnsupBSFor2G}={BS31: dataCDS_1200bps}
{UnsupBSFor2G}={BS32: dataCDS_2400bps}
{UnsupBSFor2G}={BS33: dataCDS_4800bps}
{UnsupBSFor2G}={BS34: dataCDS_9600bps}
{UnsupBSFor2G}={BS41: padAccessCA_300bps}
{UnsupBSFor2G}={BS42: padAccessCA_1200bps}
{UnsupBSFor2G}={BS43: padAccessCA_1200_75bps}
{UnsupBSFor2G}={BS44: padAccessCA_2400bps}
{UnsupBSFor2G}={BS45: padAccessCA_4800bps}
{UnsupBSFor2G}={BS46: padAccessCA_9600bps}
{UnsupBSFor2G}={BS51: dataPDS_2400bps}
{UnsupBSFor2G}={BS52: dataPDS_4800bps}
{UnsupBSFor2G}={BS53: dataPDS_9600bps}
{UnsupBSFor2G}={BS61: allAlternateSpeech_Data}
{UnsupBSFor2G}={BS81: allSpeechFollowedByData}
{UnsupBSFor2G}={BS20: HighSpeedBearerServiceCDA}
{UnsupBSFor2G}={BS21: dataCDA_300bps}
{UnsupBSFor2G}={BS22: dataCDA_1200bps}
{UnsupBSFor2G}={BS23: dataCDA_1200_75bps}
{UnsupBSFor2G}={BS24: dataCDA_2400bps}
{UnsupBSFor2G}={BS25: dataCDA_4800bps}
{UnsupBSFor2G}={BS26: dataCDA_9600bps}
{UnsupBSFor2G}={BS30: HighSpeedBearerServiceCDS}
{UnsupBSFor2G}={BS31: dataCDS_1200bps}
{UnsupBSFor2G}={BS32: dataCDS_2400bps}
{UnsupBSFor2G}={BS33:dataCDS_4800bps}
{UnsupBSFor2G}={BS34: dataCDS_9600bps}
{UnsupBSFor2G}={BS41: padAccessCA_300bps}
{UnsupBSFor2G}={BS42: padAccessCA_1200bps}
{UnsupBSFor2G}={BS43: padAccessCA_1200_75bps}
{UnsupBSFor2G}={BS44: padAccessCA_2400bps}
{UnsupBSFor2G}={BS45: padAccessCA_4800bps}
{UnsupBSFor2G}={BS46: padAccessCA_9600bps}
{UnsupBSFor2G}={BS51: dataPDS_2400bps}
{UnsupBSFor2G}={BS52: dataPDS_4800bps}
{UnsupBSFor2G}={BS53: dataPDS_9600bps}
{UnsupBSFor2G}={BS61: allAlternateSpeech_Data}
{UnsupBSFor2G}={BS81: allSpeechFollowedByData}
"Unsupported Supplementary Service Feature"
{UnsupSS}={CFU:Call Forwarding on Unconditional}
{UnsupSS}={CFB:Call Forwarding on mobile subscriber Busy}
{UnsupSS}={CFNRy:Call Forwarding not-Reply}
{UnsupSS}={CFNRc:Call Forwarding on mobile subscriber not-reachable}
"GroupSim Service"
{MBRSYNC}=<Denied|Allowed>
{DENY_USSD}=<Denied|Not_Denied|Not_Support>
{GISDN}=<Group MSISDN>
"MAP Address Restriction Service"
{MAPADDRRESTPLID}=<0-65534>
{MAPADDRRESTPLNAME}= <MAP Addrress Restriction Template Name>
"Preferred Roaming Service"
{CS_ROAMPERTPL_ID}=<1-999>
{PS_ROAMPERTPL_ID}= <1-999>
{ LTE_M2M_FLAG}=< TRUE|FALSE >
"DND Service"
{DND} = < TRUE|FALSE >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the value of NAEA ranges from 0 to 9999, the value indicates that the NAEA service is provided
and the actual NAEA value is displayed. Otherwise the value indicates that the NAEA service is not
provided and NOTPROV is displayed.
When the CAMALMANAGER parameter in the SET MAPSERV command is set to Template,
the HSS9860 uses MOD UCSI to provide a U-CSI service template for a subscriber and LST SUB
to display the only U-CSI template provided for the subscriber. When CAMALMANAGER
parameter is set to NON-Template, the HSS9860 uses MOD NTUCSI to provide one or more U-
CSI service templates for a subscriber and LST SUB to display all U-CSI templates provided for the
subscriber.
Example:
LST DYNSUB: ISDN="955678112", EPSFEATURELISTDETAIL=TRUE;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<Subscriber's MAIN IMSI>
{ISDN}=<MSISDN Number>
{ACTIVE IMSI}=<IMSI Number>
{MIMSI_SMS}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{MIMSI_VOBB}=< 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{MIMSITYPE}=<MultiIMSI|SimultaneouslyRing|OrderlyRing|OneLive>
{IMEI}=<IMEI number>
"Dynamic Status Information For GSM"
{VlrNum}=<VLR Number>,
{MscNum}=<MSC Number>,
{MsPurgedForNonGprs}=<TRUE|FALSE>,
{VLRInHplmn}=<TRUE|FALSE>,
{VLRInHomeCountry}=<TRUE|FALSE>,
{VLRInArea}=<TRUE|FALSE>,
{RequireCheckSS}=<TRUE|FALSE>,
{RoamingRestrictInMscDueToUnsupportedFeature}=<TRUE|FALSE>,
{MscOrVlrAreaRoamingRestrict}=<TRUE|FALSE>,
{ODBarredForUnsupportedCamel}=<TRUE|FALSE>,
{SupportedCamelPhase1}={TRUE|FALSE},
{SupportedCamelPhase2}={TRUE|FALSE},
{SupportedCamelPhase3}={TRUE|FALSE},
{SupportedCamelPhase4}={TRUE|FALSE},
{SRIMsrnCfActive}={TRUE|FALSE},
{ZoneCodeStatusAtMsc}={networkNode_AreaRestricted|tooManyZoneCodes|
zoneCodesConflict|regionalSubscNotSupported|zoneCodesSupported},
{longGroupIDSupported}=<TRUE|FALSE>,
{basicISTSupported}=<TRUE|FALSE>,
{istCommandSupported}=<TRUE|FALSE>,
{SuperChargerSupportedForGsm}={TRUE|FALSE},
{LMSI}=<LMSI Number>,
{ECATEGORYAtMsc}=<TRUE|FALSE>,
{CSUPLTIME}={Update Location Time},
{CSPURGETIME}={Purge Time At MSC},
{LSFLAG}=<TRUE|FALSE>,
{camelInduceBarringSMS}=<TRUE|FALSE>,
{RoamBaocTs11}=<TRUE|FALSE>,
{IMSSF}=<IMSSF Number>,
{MTRFSupported}=<TRUE|FALSE>,
{VlrNumSai}={VlrNumSai},
{TimeStampSai}={TimeStampSai},
{CS-MSISDN-LESS}=<TRUE|FALSE>,
{CSRATTYPE}=<UTRAN|GERAN|UTRAN&GERAN|GAN|UTRAN&GAN|
GERAN&GAN|UTRAN&GERAN&GAN|I-HSPA|UTRAN&I-HSPA|GERAN&I-HSPA|
UTRAN&GERAN&I-HSPA|GAN&I-HSPA|UTRAN&GAN&I-HSPA|GERAN&GAN&I-
HSPA|UTRAN&GERAN&GAN&I-HSPA|E-UTRAN|UTRAN&E-UTRAN|GERAN&E-
UTRAN|UTRAN&GERAN&E-UTRAN|GAN&E-UTRAN|UTRAN&GAN&E-UTRAN|
GERAN&GAN&E-UTRAN|UTRAN&GERAN&GAN&E-UTRAN|I-HSPA&E-UTRAN|
UTRAN&I-HSPA&E-UTRAN|GERAN&I-HSPA&E-UTRAN|UTRAN&GERAN&I-
HSPA&E-UTRAN|GAN&I-HSPA&E-UTRAN|UTRAN&GAN&I-HSPA&E-UTRAN|
GERAN&GAN&I-HSPA&E-UTRAN|UTRAN&GERAN&GAN&I-HSPA&E-UTRAN>,
{ CsUplStatus}=<Normal|TimeOut|Exception>,
{ZoneCodeStatusAtSgsn}=<networkNode_AreaRestricted|tooManyZoneCodes|
zoneCodesConflict|regionalSubscNotSupported|zoneCodesSupported>,
{SuperChargerSupportedForGprs}={TRUE|FALSE},
"Dynamic Status Information For MME"
{MMEHOST}={MME Host Name}
{MMEREALM}={MME Realm Name}
{RATTYPE}=<WLAN|UTRAN|GERAN|GAN|HSPA_EVOLUTION|E_UTRAN|
CDMA2000_1X |HRPD|UMB>
{VPLMN}={Visited PLMN Identifier}
{PURGEDONMME}=<FALSE|TRUE>
{MME-UpdateLocation-Time}= {MME Update Location Time}
{MME-FeatureList}={MME FeatureList in HEX format}
{MME-FeatureList2}={MME FeatureList2 in HEX format}
{LastIDRorDSRFailed}=<FALSE|TRUE>
{Single-Registration-Indication}=<FALSE|TRUE>
{Skip-Subscriber-Data-Indicator}=<FALSE|TRUE>
{GPRS-Subscription-Data-Indicator}=<FALSE|TRUE>
{Node-Type-Indicator}=<Single|Combined>
{Initial-Attach-Indicator}=<FALSE|TRUE>
{PS-LCS-Not-Supported-By-UE}=<FALSE|TRUE>
{IMEI}=<IMEI number>
{IMEISV}=<IMEISV number>
{IMS-VO-PS-Sessions-Supported}=<NOT_SUPPORTED|SUPPORTED|UNKNOWN>
{UE-SRVCC-Capability}=<UE-SRVCC-NOT-SUPPORTED|UE-SRVCC-SUPPORTED>
{VGMLC-MME}=<IPV4|IPV6>
{TAI}=<Tracking Area Identity>
"MME-FeatureList-DetailInfo"
{ODB-all-APN}= <TRUE>
{ODB-HPLMN-APN}=<TRUE>
{ODB-VPLMN-APN}=<TRUE>
{ODB-all-OG}=<TRUE>
{ODB-all-InternationalOG}=<TRUE>
{ODB-all-InternationalOGNotToHPLMN-Country}=<TRUE>
{ODB-all-InterzonalOG}=<TRUE>
{ODB-all-InterzonalOGNotToHPLMN-Country}=<TRUE>
{ODB-all-InterzonalOGAndInternationalOGNotToHPLMN-Country}={TRUE}
{RegSub}=<TRUE>
{Trace}=<TRUE>
{LCS-all-PrivExcep}=<TRUE>
{LCS-Universal}=<TRUE>
{LCS-CallSessionRelated}=<TRUE>
{LCS-CallSessionUnrelated}=<TRUE>
{LCS-PLMNOperator}=<TRUE>
{LCS-ServiceType}=<TRUE>
{LCS-all-MOLR-SS}=<TRUE>
{LCS-BasicSelfLocation}=<TRUE>
{LCS-AutonomousSelfLocation}=<TRUE>
{LCS-TransferToThirdParty}=<TRUE>
{SM-MO-PP}=<TRUE>
{Barring-OutgoingCalls}=<TRUE>
{BAOC}=<TRUE>
{BOIC}=<TRUE>
{BOICExHC}={TRUE>
{UE-Reachability-Notification}=<TRUE>
{T-ADS Data Retrieval}=<TRUE>
{State/Location-Information-Retrieval}=<TRUE>
{Partial Purge}=<TRUE>
{Local Time Zone Retrieval}=<TRUE>
{Additional MSISDN}=<TRUE>
"MME-FeatureList2-DetailInfo"
{SMS in MME}=<TRUE>
{SMS in SGSN}=<TRUE>
{Dia-LCS-all-PrivExcep}=<TRUE>
{Dia-LCS-Universal}=<TRUE>
{Dia-LCS-CallSessionRelated}=<TRUE>
{Dia-LCS-CallSessionUnrelated}=<TRUE>
{Dia-LCS-PLMNOperator}=<TRUE>
{Dia-LCS-ServiceType}=<TRUE>
{Dia-LCS-all-MOLR-SS}=<TRUE>
{Dia-LCS-BasicSelfLocation}=<TRUE>
{Dia-LCS-AutonomousSelfLocation}=<TRUE>
{Dia-LCS-TransferToThirdParty}=<TRUE>
{Gdd-in-SGSN}=<TRUE>
{Optimized-LCS-Proc-Support}=<TRUE>
{SGSN CAMEL Capability}=<TRUE>
{ProSe Capability}=<TRUE>
{P-CSCF Restoration}=<TRUE>
{Reset-IDs}=<TRUE>
{Communication-pattern}=<TRUE>
"Dynamic Status Information For S4SGSN"
{SGSNHOST}={SGSN Host Name}
{SGSNREALM}={SGSN Realm Name}
{SGSNNUMBER}={SGSN GT Number}
{RATTYPE}=<WLAN|UTRAN|GERAN|GAN|HSPA_EVOLUTION|E_UTRAN|
CDMA2000_1X |HRPD|UMB>
{VPLMN}={Visited PLMN Identifier}
{PURGEDONSGSN}=<FALSE|TRUE>
{AREARESTRICT}=<FALSE|TRUE>
{S4SGSN-UpdateLocation-Time}={ S4SGSN Update Location Time}
{S4SGSN-FeatureList}={S4SGSN FeatureList in HEX format}
{S4SGSN-FeatureList2}={S4SGSN FeatureList2 in HEX format}
{LastIDRorDSRFailed}=<FALSE|TRUE>
{Skip-Subscriber-Data-Indicator}=<FALSE|TRUE>
{GPRS-Subscription-Data-Indicator}=<FALSE|TRUE>
{Node-Type-Indicator}=<Single|Combined>
{Initial-Attach-Indicator}=<FALSE|TRUE>
{PS-LCS-Not-Supported-By-UE}=<FALSE|TRUE>
{IMEI}=<IMEI number>
{IMEISV}=<IMEISV number>
{IMS-VO-PS-Sessions-Supported}=<NOT_SUPPORTED|SUPPORTED|UNKNOWN>
{UE-SRVCC-Capability}=<UE-SRVCC-NOT-SUPPORTED|UE-SRVCC-SUPPORTED>
VGMLC-SGSN=<IPV4|IPV6>
"S4SGSN-FeatureList-DetailInfo"
{ODB-all-APN}=<TRUE>
{ODB-HPLMN-APN}=<TRUE>
{ODB-VPLMN-APN}=<TRUE>
{ODB-all-OG} =<TRUE>
{ODB-all-InternationalOG}=<TRUE>
{ODB-all-InternationalOGNotToHPLMN-Country}=<TRUE>
{ODB-all-InterzonalOG}=<TRUE>
{ODB-all-InterzonalOGNotToHPLMN-Country}=<TRUE>
{ODB-all-InterzonalOGAndInternationalOGNotToHPLMN-Country}={TRUE}
{RegSub}=<TRUE>
{Trace}=<TRUE>
{LCS-all-PrivExcep}=<TRUE>
{LCS-Universal}=<TRUE>
{LCS-CallSessionRelated}=<TRUE>
{LCS-CallSessionUnrelated}=<TRUE>
{LCS-PLMNOperator}=<TRUE>
{LCS-ServiceType}=<TRUE>
{LCS-all-MOLR-SS}=<TRUE>
{LCS-BasicSelfLocation}=<TRUE>
{LCS-AutonomousSelfLocation}=<TRUE>
{LCS-TransferToThirdParty}=<TRUE>
{SM-MO-PP}=<TRUE>
{Barring-OutgoingCalls}=<TRUE>
{BAOC}=<TRUE>
{BOIC}=<TRUE>
{BOICExHC}={TRUE>
{UE-Reachability-Notification}=<TRUE>
{T-ADS Data Retrieval}=<TRUE>
{State/Location-Information-Retrieval}=<TRUE>
{Partial Purge}=<TRUE>
{Local Time Zone Retrieval}=<TRUE>
{Additional MSISDN}=<TRUE>
"S4SGSN-FeatureList2-DetailInfo"
{SMS in MME}=<TRUE>
{SMS in SGSN}=<TRUE>
{Dia-LCS-all-PrivExcep}=<TRUE>
{Dia-LCS-Universal}=<TRUE>
{Dia-LCS-CallSessionRelated}=<TRUE>
{Dia-LCS-CallSessionUnrelated}=<TRUE>
{Dia-LCS-PLMNOperator}=<TRUE>
{Dia-LCS-ServiceType}=<TRUE>
{Dia-LCS-all-MOLR-SS}=<TRUE>
{Dia-LCS-BasicSelfLocation}=<TRUE>
{Dia-LCS-AutonomousSelfLocation}=<TRUE>
{Dia-LCS-TransferToThirdParty}=<TRUE>
{Gdd-in-SGSN}=<TRUE>
{Optimized-LCS-Proc-Support}=<TRUE>
{SGSN CAMEL Capability}=<TRUE>
{ProSe Capability}=<TRUE>
{P-CSCF Restoration}=<TRUE>
{Reset-IDs}=<TRUE>
{Communication-pattern}=<TRUE>
"Dynamic Status Information For IMS"
{UE-Register-AtIMS}=<TRUE|FALSE>
"Dynamic APN Information For EPS"
{CNTXID}=<1>
{APN}={Access Point Name}
{PDNGWHOST}={PDN-GW Host Name}
{PDNGWREALM}={PDN-GW Realm Name}
{PDNGWIPV4}={the IPv4 of PDN-GW}
{PDNGWIPV6}={the IPv6 of PDN-GW}
{WILDCARDFLAG}=<TRUE|FALSE>
{VNI}={Visited Network Identifier}
{CNXTID}=<2>
...........
"Dynamic Status Information For Non-3GPP"
{VNI}=<VNI>
{REGSTATUS}=< REGISTERED | NOT_REGISTERED >
{ACCESSNETID}=<Access Net ID>
{TGPPAAASERVERNAME} = <AAA Server Name>
{TGPPAAASERVERREALM}=< AAA Server Realm >
{TGPP2MEID}=<TGPP2MEID number>
{IMEI}=<IMEI number>
{IMEISV}=<IMEISV number>
{Server-Assignment-Time}={AAA Update Location Time}
{TS61: FascimileGroup3andAlterSpeech}
{TS62: autoFascimileGroup3}
"Resend Information"
CS_ISD=<TRUE|FALSE>
CS_DSD=<TRUE|FALSE>
CS_CLR=<TRUE|FALSE>
PS_ISD=<TRUE|FALSE>
PS_DSD=<TRUE|FALSE>
PS_CLR=<TRUE|FALSE>
S6a_IDR=<TRUE|FALSE>
S6a_CLR=<TRUE|FALSE>
S6d_IDR=<TRUE|FALSE>
S6d_CLR=<TRUE|FALSE>
UDCD=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the parameter CONTENT is not set to any value. The default value of CONTENT is ALL. The
dynamic data in all the result sections is displayed.
If the parameter CONTENT is set to GSM, only the dynamic data in section "Dynamic Status
Information For GSM" is displayed.
If the parameter CONTENT is set to GPRS, only the dynamic data in section "Dynamic Status
Information For GPRS" is displayed.
If the parameter CONTENT is set to SM, only the dynamic data in sections "Short Message
Dynamic Data for GSM", "Short Message Dynamic Data for GPRS", and "Short Message
Center Information" is displayed.
If the parameter CONTENT is set to ODB, only the dynamic data in section "ODB Unsupported
Features For GSM" and "ODB Unsupported Features For GPRS" is displayed.
If the parameter CONTENT is set to UNSP, only the dynamic data in sections "Unsupported
TeleService Feature", "Unsupported Bearer Service Feature", and "Unsupported
Supplementary Service Feature" is displayed. In these sections, only the unsupported services are
displayed.
If the parameter CONTENT is set to LCS, only the dynamic data in Section "Supported LCS" is
displayed.
If the parameter CONTENT is set to ALLSM, only the dynamic data in sections "Short Message
Dynamic Data for GSM", "Short Message Dynamic Data for GPRS", and "Short Message
Center Information" is displayed.
If the parameter CONTENT is set to EPS, only the dynamic data in sections "Dynamic Status
Information For MME", "Dynamic Status Information For S4SGSN", "Dynamic Status
Information For IMS", "Short Message Dynamic Data For IP", "Dynamic Status Information
For Non-3GPP", "Dynamic APN Information For EPS", and "AS Subscription to Notifications
Data" is displayed.
Example:
MOD LCK: IMSI="984519856312345",IC=TRUE,OC=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one of the parameters IC, OC, GPRSLOCK, CSUPLLCK, PSUPLLCK, EPSLOCK, and
NON3GPPLOCK must be specified.
Example:
LST LCK: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{IC}=<TRUE|FALSE>
{OC}=<TRUE|FALSE>
{GPRSLOCK}=<TRUE|FALSE>
{CSUPLLCK}=<TRUE|FALSE>
{PSUPLLCK}=<TRUE|FALSE>
{EPSLOCK}=<TRUE|FALSE>
{NON3GPPLOCK}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to modify the GPRS lock state of a subscriber.
Parameter Description:
Example:
MOD GPRSLCK: IMSI="984519856312345",LOCK=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the returned error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST GPRSLCK: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{LOCK}=<TRUE|FALSE>
{PSUPLLCK}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
originating calls.
FALSE: The HLR does not restrict subscribers
from originating calls.
Example:
MOD SABLCK: IMSI="984519856312345",IC=TRUE,OC=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command is applicable only to the subscriber whose NAM is BOTH, MSC, or NONE.
At least one of the parameters IC and OC must be specified.
Example:
LST SABLCK: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{ISDN}=<MSISDN Number>
{IC}=<TRUE|FALSE>
{OC}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
SET MULTISDN: IMSI="444440123456789", ISDN="9854670023", PROV=TRUE,
DEFAULTCALL=BS21, BCALIAS="BC", SER_TYPE=OCMN;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose network access mode (NAM) is BOTH, MSC,
or NONE.
Example:
MOD IMSI: ISDN="9854670023", NEWIMSI="438320000247111";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The KI of a new IMSI must have been loaded before the new IMSI is used to replace an old IMSI.
Once the parameter CARDTYPE is changed, the subscriber can change from GSM/SGSN to UMTS
or from UMTS to GSM/SGSN.
The difference between MILENAGE_2 and MILENAGE is that different algorithms are used for
converting XRES of authentication quintuplets into SRES of authentication triplets.
Example:
LST IMSI: ISDN="9854670023";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{IMSI2}=<IMSI2 Number>
{IMSI3=<IMSI3 Number>
{IMSI4}=<IMSI4 Number>
{IMSI5}=<IMSI5 Number>
{IMSI6}=<IMSI6 Number>
{IMSI7}=<IMSI7 Number>
{IMSI8}=<IMSI8 Number>
{IMSI9}=<IMSI9 Number>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD ISDN: ISDN="934567901", NEWISDN="9854670023";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The parameter NewISDN is mandatory for non M2M subscribers and is optional for M2M
subscribers.
Example:
LST ISDN: IMSI="452323132423";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=< MSISDN Number >
{INDICATOR}=<master-MSISDN | auxiliary-MSISDN>
{DEFAULTCALL}=< BasicServiceCode enumeration >
{DSCODE}=< BasicServiceCode enumeration >
{ITC}=< ITC enumeration>
{TM}=< TM enumeration>
{RCR}=< RCR enumeration>
{MODE}=< MODE enumeration>
{STRUCT}=< STRUCT enumeration>
{COMP}=<TRUE|FALSE>
{SAP}=< SAP enumeration>
{RA}=< RA enumeration>
{ASYNC}=<TRUE|FALSE>
{UR}=< UR enumeration>
{NDB}=< NDB enumeration>
{NSB}=< NSB enumeration>
{PARITY}=< PARITY enumeration>
{NICRX}=<TRUE|FALSE>
{NICTX}=<TRUE|FALSE>
{INTRAT}=< INTRAT enumeration>
{MT}=< MT enumeration>
{CE}=< CE enumeration>
{FNUR}=< FNUR enumeration>
{WAIUR}=< WAIUR enumeration>
{CS}=< CS enumeration>
{SVI}=< SVI enumeration>
{DM}=< DM enumeration>
{CFG}=< CFG enumeration>
{NIRR}=< NIRR enumeration>
{ESTD}=< ESTD enumeration>
{OITC}=< OITC enumeration>
{ORA}=< ORA enumeration>
{RAH}=< RAH enumeration>
{MFESDL}=< MFESDL enumeration>
{LLI}=< LLI enumeration>
{ASGN}=< ASGN enumeration>
{IOBN}=< IOBN enumeration>
{UL1P}=< UL1P enumeration>
{OMT}=< OMT enumeration>
{ACC}=< ACC enumeration>
{NOTC}=< NOTC enumeration>
{UIMI}=< UIMI enumeration>
{CCE}=< CCE enumeration>
{AI}=< AI enumeration>
{UL2P}=< UL2P enumeration>
{SER_TYPE}=<MULISDN|OCMN>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TELE: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose network access mode (NAM) is BOTH, MSC,
or NONE.
Example:
MOD SMSMT: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD SMSMO: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TS62: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST TS: IMSI="444440123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{TSCODE}=<List of all teleservice code which is subscribed by mentioned MSISDN>...
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD BS20: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE. Only 3G
subscribers can subscribe to this service.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS21: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS22: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS23: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Parameter Description:
Example:
MOD BS24: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
BS25 service.
Example:
MOD BS25: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS26: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS30: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to provide or withdraw the Bearer Service 31 for a
subscriber. Bearer Service 31 (BS 31) is a data service of CDS-1200 bps.
Parameter Description:
Example:
MOD BS31: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS32: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS33: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS34: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to provide or withdraw the Bearer Service 41 for a
subscriber. Bearer Service 41 (BS 41) is a data service of Pad access CA-300 bps.
Parameter Description:
Example:
MOD BS41: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
service.
FALSE: The HLR withdraws the
BS42 service.
Example:
MOD BS42: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS43: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS44: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to provide or withdraw the Bearer Service 45 for a
subscriber. Bearer Service 45 (BS 45) is a data service of Pad access CA-4800 bps.
Parameter Description:
Example:
MOD BS45: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS46: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS51: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS52: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS53: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS81: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST BS: IMSI="444440123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{BSCODE}=<List of all bearer service code which is subscribed by mentioned MSISDN>...
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBSS: IMSI="984519856312345",ODBSS=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBIC: IMSI="984519856312345",ODBIC=BAIC;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBOC: IMSI="984519856312345",ODBOC=BAOC;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBPB1: IMSI="984519856312345",ODBPB1=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBPB2: IMSI="984519856312345",ODBPB2=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBPB3: IMSI="984519856312345",ODBPB3=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBPB4: IMSI="984519856312345",ODBPB4=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ODBENTE: IMSI="984519856312345",ODBENTE=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The subscriber whose NAM is SGSN cannot subscribe to the ODB-ENTE service.
Example:
MOD ODBINFO: IMSI="984519856312345",ODBINFO=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
MOD ODBROAM: IMSI="984519856312345",ODBROAM=NOBAR;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to query all the operator determined barring (ODB) services
for a subscriber.
Parameter Description:
Example:
LST ODBDAT: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ODBSS}=<TRUE|FALSE>
{ODBIC}=<"NOBIC"|"BAIC"|"BICROAM"|"BICCROSSDOMESTIC"
|"BICROAMORCROSSDOMESTIC">
{ODBOC}=<"NOBOC"|"BAOC"|"BOIC"|"BOICEXHC"|"BOCROAM"
|"BOCCROSSDOMESTIC"|"BOCROAMORCROSSDOMESTIC">
{ODBPB1}=<TRUE|FALSE>
{ODBPB2}=<TRUE|FALSE>
{ODBPB3}=<TRUE|FALSE>
{ODBPB4}=<TRUE|FALSE>
{ODBENTE}=<TRUE|FALSE>
{ODBINFO}=<TRUE|FALSE>
{ODBROAM}=<"NOBAR"|"BROHPLMN"|"BROHPLMNC"|"BROHPLMNCGPRS">
{ODBRCF}=<"NOBRCF"| "BRACF"| "BRICFEXHC"| "BRICF" >;
{ODBECT}=<"NoBECT"|"BAllECT"|"BChargeableECT"|"BInternationalECT"
|"BInterzonalECT">
{ODBDECT}=<TRUE|FALSE>
{ODBMECT}=<TRUE|FALSE>
{ODBPOS}=<NOBPOS|BAPOS|BHPLMNAPROAM|BALLAPROAM >
{ODBPOSTYPE}=<BOTH|MSInit|NetworkInit>
{ODBENTEROAM}=<TRUE|FALSE>
{ODBINFOROAM}=<TRUE|FALSE>
{BROLOCDOMEGPRS}=<TRUE|FALSE>
{BROCROSSDOMESTICGPRS}=<TRUE|FALSE>
{BROLOCINTERGPRS}=<TRUE|FALSE>
{BROCROSSINTERGPRS}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
group.
RESET: The HLR resets a CLIP basic
service group.
BSGLIST Enumerated TS1X Specifies the basic service group of CLIP C
TS2X service.
TS6X
TS1X: telephony service
BS2X
TS2X: short message service
BS3X
TS6X: facsimile service group
BS2X: asynchronous bearer service
BS3X: synchronous bearer service
Example:
MOD CLIP: IMSI="345126789012345",PROV=FALSE;
MOD CLIP:IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameter OVERRIDE does not need to be specified.
If the parameter PROV is set to TRUE, the parameter OVERRIDE is mandatory.
Example:
LST CLIP: IMSI="345126789012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{STATUS}=<PROV|NOTPROV>
{OVERRIDE}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD CLIR: IMSI="345126789012345",PROV=FALSE;
MOD CLIR: IMSI="345126789012345",PROV=TRUE,MODE=TEMPALLOWED;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameter MODE does not need to be specified.
If the parameter PROV is set to TRUE, the parameter MODE is mandatory.
Example:
LST CLIR: IMSI="345126789012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{STATUS}=<PROV|NOTPROV>
{MODE}=<PERMANENT|TEMPALLOWED|TEMPRESTRICTED>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD COLP: IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;
MOD COLP: IMSI="345126789012345",PROV=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameter OVERRIDE does not need to be specified.
If the parameter PROV is set to TRUE, the parameter OVERRIDE is mandatory.
Example:
LST COLP: IMSI="345126789012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSInumber>
{ISDN}=<MSISDN number>
{STATUS}=<PROV|NOTPROV>
{OVERRIDE}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD COLR: IMSI="345126789012345",PROV=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
LST COLR: IMSI="345126789012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=< MSISDN number>
{STATUS}=<PROV|NOTPROV>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST PRERES: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CLIP}=<TRUE|FALSE>
{OVERRIDE}=<TRUE/FALSE>
{CLIR}=<TRUE|FALSE>
{MODE}=<PERMANENT/TEMPALLOWED/TEMPRESTRICT>
{COLP}=<TRUE|FALSE>
{OVERRIDE}=<TRUE/FALSE>
{COLR}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CFU: IMSI="123454321234543",PROV=TRUE,OFAID=2,NCS=TRUE,
COU=SUBSCRIBER;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameters OFAID, NCS, and COU do not need to be
specified.
If the parameter PROV is set to TRUE, the parameters OFAID, NCS, and COU are optional.
Example:
REG CFU:
IMSI="123454321234543",FTN="013645678901",PROPERTY=NATIONAL,BSG=ALL;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
In the MAPCONF command, when RETCODE_MODE is TRUE, SUCCESS0002 is mapped to
ERR3006. The default value of RETCODE_MODE is TRUE.
Example:
ERA CFU: IMSI="123454321234543";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
MOD CFB: IMSI="123454321234543",PROV=TRUE,OFAID=2,NFS=TRUE, NCS=TRUE,
COU=SUBSCRIBER;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameters OFAID, NCS, NFS, and COU do not need
to be specified.
If the parameter PROV is set to TRUE, the parameters OFAID, NCS, NFS, and COU are optional.
Example:
REG CFB: IMSI="123454321234543", FTN="013645678901", PROPERTY=NATIONAL,
BSG=TS1X;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
In the MAPCONF command, when RETCODE_MODE is TRUE, SUCCESS0002 is mapped to
ERR3006. The default value of RETCODE_MODE is TRUE.
Example:
ERA CFB: IMSI="123454321234543";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
MOD CFNRY: IMSI="123454321234543", PROV=TRUE, OFAID=2, NFS=TRUE,
NCS=TRUE, COU=OPERATOR;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameters OFAID, NCS, NFS, and COU do not need
to be specified.
If the parameter PROV is set to TRUE, the parameters OFAID, NCS, NFS, and COU are optional.
Example:
REG CFNRY: IMSI="123454321234543", FTN="013645678901",
PROPERTY=INTERNATIONAL;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
The default value of the parameter NOREPTIME is the default no reply time set by the system.
In the MAPCONF command, when RETCODE_MODE is TRUE, SUCCESS0002 is mapped to
ERR3006. The default value of RETCODE_MODE is TRUE.
Function: This command is used to erase the call forwarding on no reply (CFNRy)
supplementary service for a subscriber.
Parameter Description:
Example:
ERA CFNRY:IMSI="123454321234543";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
MOD CFNRC: IMSI="123454321234543",PROV=TRUE,OFAID=2,NCS=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, the parameters OFAID, NCS, and COU do not need to be
specified.
If the parameter PROV is set to TRUE, the parameters OFAID, NCS, and COU are optional.
Example:
REG CFNRC: IMSI="123454321234543", FTN="013645678901",
PROPERTY=NATIONAL;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
In the MAPCONF command, when RETCODE_MODE is TRUE, SUCCESS0002 is mapped to
ERR3006. The default value of RETCODE_MODE is TRUE.
Example:
ERA CFNRC: IMSI="123454321234543";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
LST CFALL: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
"CFU"
{TPLID}=<OFA Template Id>
{NCS}=<"TRUE"|"FALSE">
{COU}=<"OPERATOR"|"SUBSCRIBER">
{FTN}=<Forward-To Number>
{BSG}=<"TS1X"|"TS6X"|"TSDX"|"BS2X"|"BS3X"|"ALL BS">
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
"CFB"
{TPLID}=<OFA Template Id>
{NFS}=<"TRUE"|"FALSE">
{NCS}=<"TRUE"|"FALSE">
{COU}=<"OPERATOR"|"SUBSCRIBER">
{FTN}=<Forward-To Number>
{BSG}=<"TS1X"|"TS6X"|"TSDX"|"BS2X"|"BS3X"|"ALL BS">
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
"CFNRC"
{TPLID}=<OFA Template Id>
{NCS}=<"TRUE"|"FALSE">
{COU}=<"OPERATOR"|"SUBSCRIBER">
{FTN}=<Forward-To Number>
{BSG}=<"TS1X"|"TS6X"|"TSDX"|"BS2X"|"BS3X"|"ALL BS">
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
"CFNRY"
{TPLID}=<OFA Template Id>
{NFS}=<"TRUE"|"FALSE">
{NCS}=<"TRUE"|"FALSE">
{COU}=<"OPERATOR"|"SUBSCRIBER">
{FTN}=<Forward-To Number>
{BSG}=<"TS1X"|"TS6X"|"TSDX"|"BS2X"|"BS3X"|"ALL BS">
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
{NotReplyTime}=<Not Reply Time>
"CFD"
<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
{NFS}=<"TRUE"|"FALSE">
{CFD_SHORTNUM}=<"TRUE"|"FALSE">
{NCS}=<"TRUE"|"FALSE">
{SUPINTERCFD}=<"TRUE"|"FALSE">
{VALIDCCF}=<"NULL"|"CFB"|"CFNRy"|"CFB&CFNRy"|"CFNRc"|"CFB&CFNRc"|"
CFNRy& CFNRc"|" CFB&CFNRy&CFNRc">
{FTN}=<Forward-To Number>
{BSG}=<"TS1X"|"TS6X"|"TSDX"|"BS2X"|"BS3X">
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
{NotReplyTime}=<Not Reply Time>
... <List of attributes of CF for all Basic Service Group to which CF is provisioned>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CWAIT: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
ACT CWAIT: IMSI="123454321234543",BSG=TS1X;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
DEA CWAIT: IMSI="123454321234543";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
LST CWAIT: IMSI="444441234567890";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{MSISDN}=<MSISDN Number>
CWAIT
{BSG}=<Basic Service Group1>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group2>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group3>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group4>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group5>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group6>.
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
The activation information of the CW basic service groups is displayed only when the CW
service is provided and activated. That is, {BSGn} is displayed only when the CW service is
activated. The valid values of <Basic Service Group> are the enumerated values of CW basic
service group except ALL.
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
HOLD service.
FALSE: The HSS9860 withdraws the
HOLD service.
Example:
MOD HOLD: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
Example:
LST HOLD: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>,
{MSISDN}=<MSISDN number>
{HOLD}=<PROV|NOTPROV>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD MPTY: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the MPTY service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the MPTY service for a
subscriber.
Example:
LST MPTY: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{MSISDN}=<MSISDN Number>
{MPTY}=<PROV|NOTPROV>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD AOCC: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the AoCC service for a
subscriber.
Example:
LST AOCC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{MSISDN}=<MSISDN Number>
{AOCC}=<PROV|NOTPROV>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD AOCI: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the AoCI service for a
subscriber.
Example:
LST AOCI: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{MSISDN}=<MSISDN number>
{AOCI}=<"Provisioned"|"NotProvisioned">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ECT: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the ECT service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the ECT service for a
subscriber.
Example:
LST ECT: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{MSISDN}=<MSISDN Number>
{ECT}=<PROV|NOTPROV>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BAOC:IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the BAOC service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BAOC service for a
subscriber.
Example:
MOD BOIC: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the BOIC service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BOIC service for a
subscriber.
Example:
MOD BOICEXHC: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the BOIC-EXHC
service for a subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BOIC-EXHC service
for a subscriber.
Example:
MOD BAIC: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the BAIC service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BAIC service for a
subscriber.
Example:
MOD BICROM: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the BIC-Roam service
for a subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BIC-Roam service for
a subscriber.
Example:
ACT BAOC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
ACT BOIC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
ACT BOICEXHC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The default value of the parameter BSG is ALL.
Example:
ACT BAIC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
ACT BICROM: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BAOC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BOIC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BOICEXHC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BAIC: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BICROM: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
LST CBAR: IMSI="444441234567890",BSG=TS1X;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{ISDN}=<MSISDN Number>
<CBCOU>=<"OPERATOR"|"SUBSCRIBER">
<CBCOUReason>=<"NotcaredReason"|"PasswordExceed">
<CBService>
<BSG>=<"PROV"|"NOTPROV"|"ACTIVE"|"QUICENT">
…
<BSG>=<"PROV"|"NOTPROV"|"ACTIVE"|"QUICENT">
…
<CBService>
<BSG>=<"PROV"|"NOTPROV"|"ACTIVE"|"QUICENT">
…
<BSG>=<"PROV"|"NOTPROV"|"ACTIVE"|"QUICENT">
CB services include BAOC, BOIC, BOIC-exHC, BAIC, BIC-Roam, and BORO services.
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The default value of the parameter BSG is ALL.
Example:
MOD BARPWD: IMSI="444440123456789",PWD="1234";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDNIMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The new barring password is a decimal number of 4 digits or FFFF. This parameter is mandatory.
The new barring password is unavailable if PWD is set to FFFF.
Example:
MOD CBCOU: IMSI="444441234567890", COU=OPERATOR;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
LST SS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=< MSISDN>
{CLIP}=<"PROV"|"NOTPROV">
{CLIPOVERRIDE}=<"TRUE"|"FALSE">
{CLIR}=<"PROV"|"NOTPROV">
{CLIRMODE}=<"PERMANENT"|"TEMPALLOWED"|"TEMPRESTRICTED">
{COLP}=<"PROV"|"NOTPROV">
{COLPOVERRIDE}=<"TRUE"|"FALSE">
{COLR}=<"PROV"|"NOTPROV">
{HOLD}=<"PROV"|"NOTPROV">
{MPTY}=<"PROV"|"NOTPROV">
{ECT}=<"PROV"|"NOTPROV">
{CFU}=<"PROV"|"NOTPROV">
{CFB}=<"PROV"|"NOTPROV">
{CFNRY}=<"PROV"|"NOTPROV">
{CFNRC}=<"PROV"|"NOTPROV">
{CFD}=<"PROV"|"NOTPROV">
{CW}=<"PROV"|"NOTPROV">
{BAOC}=<"PROV"|"NOTPROV">
{TS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BOIC}=<"PROV"|"NOTPROV">
{TS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BOICEXHC}=<"PROV"|"NOTPROV">
{TS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BORO}=<"PROV"|"NOTPROV">
{TS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BAIC}=<"PROV"|"NOTPROV">
{TS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BICROAM}=<"PROV"|"NOTPROV">
{ECTTS 1X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS 6X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 2X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{BS 3X}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{TS DX}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUIESCENT">
{CBCOU}=<"OPERATOR"|"SUBSCRIBER">
{AOCC}=<"PROV"|"NOTPROV">
{AOCI}=<"PROV"|"NOTPROV">
{UUS1}=<"PROV"|"NOTPROV">
{UUS2}=<"PROV"|"NOTPROV">
{UUS3}=<"PROV"|"NOTPROV">
{plmn-specificSS-1}=<"PROV"|"NOTPROV">
{plmn-specificSS-2}=<"PROV"|"NOTPROV">
{plmn-specificSS-3}=<"PROV"|"NOTPROV">
{plmn-specificSS-4}=<"PROV"|"NOTPROV">
{plmn-specificSS-5}=<"PROV"|"NOTPROV">
{plmn-specificSS-6}=<"PROV"|"NOTPROV">
{plmn-specificSS-7}=<"PROV"|"NOTPROV">
{plmn-specificSS-8}=<"PROV"|"NOTPROV">
{plmn-specificSS-9}=<"PROV"|"NOTPROV">
{plmn-specificSS-A}=<"PROV"|"NOTPROV">
{plmn-specificSS-B}=<"PROV"|"NOTPROV">
{plmn-specificSS-C}=<"PROV"|"NOTPROV">
{plmn-specificSS-D}=<"PROV"|"NOTPROV">
{plmn-specificSS-E}=<"PROV"|"NOTPROV">
{plmn-specificSS-F}=<"PROV"|"NOTPROV">
{allplmn-specificSS }=<"PROV"|"NOTPROV">
{MC}=<NOTPROV|PROV >
{EMLPP}=<"PROV"|"NOTPROV">
{CNAP}=<"PROV"|"NOTPROV">
{CNAPOVERRIDE}=<"PROV"|"NOTPROV">
{CCBS}=<"PROV"|"NOTPROV">
{CCBSTARGET}=<"PROV"|"NOTPROV">
{CD}=<"PROV"|"NOTPROV">
...<List of SS status for all mentioned BSG>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD VSRR: IMSI="984519856312345",PROV=TRUE,TPLTYPE=VLR,TPLID=123;
Or:
MOD VSRR: IMSI="984519856312345", PROV=FALSE,TPLTYPE=VLR;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameters TPLTYPE and TPLID do not need to be
specified.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified. If the
parameter TPLTYPE is not specified, the parameter TPLID does not need to be specified.
Example:
LST VSRR: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{MSISDN}=<MSISDN number>
{VLRTPLID}=<Template id>,
{SGSNTPLID}=<Template id>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter TPLTYPE is not specified when running this command, the values of both
parameters VLRTPLID and SGSNTPLID are displayed in the output. Otherwise, only the value of
either parameter is displayed.
Example:
MOD TPLGPRS: IMSI="984519856312345",PROV=TRUE,TPLID=123;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter TPLID is mandatory.
If the parameter PROV is set to FALSE and the parameter TPLID is specified, only the GPRS
template specified by TPLID is deleted. If the parameter PROV is set to FALSE and the parameter
TPLID is not specified, all the GPRS templates are deleted.
Example:
LST GPRS: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{CHARGE_GLOBAL}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{SCHARGE_GLOBAL}=<NULL|a string of hexadecimal characters ranging from 0000 to
FFFF>
{CNTXID}=<1>
{PDPTYPE}=<X25|PPP|OCSIHOSS|IPV4|IPV6>
{PDPADD}=<PDP Address like 10.64.12.11>
{ADDIND}=<STATIC|DYNAMIC>
{PDPADDIPV4}=<PDP Address 2 like 10.64.12.11>
{ADD2IND}=<STATIC|DYNAMIC>
{RELCLS}=<ACKALLPRODT|ACKLLCRLCPRODT|ACKRLCPRODT|
UACKALLPRODT|UACKALLUPRODT>
{DELAYCLS}=<DELAY1|DELAY2|DELAY3|DELAY4>
{PRECLS}=<HIGH|NORMAL|LOW>
{PEAKTHR}=<GPRS_PEAK_THROUGHPUT enumeration>
{MEANTHR}=<GPRS_MEAN_THROUGHPUT enumeration>
{ARPRIORITY}=<HIGHPRIORITY|NORMALPRIORITY|LOWPRIORITY>
{ERRSDU}=<NODETECT|YES|NO>
{DELIVERY}=<YES|NO>
{TRAFFICCLS}=<CONVER|STREAM|INTERACT|BACKGRD>
{ MAXSDUSIZE}=<GPRS_SDU_SIZE enumeration>
{MAXBRUPL}=<GPRS_BIT_RATE enumeration>
{MAXBRDWL}=<GPRS_BIT_RATE enumeration>
{RESBER}=<GPRS_RESIDUAL_BER enumeration>
{SDUERR}=<GPRS_SDU_ERROR_RATE enumeration>
{TRANSFERDEL}=<GPRS_TRANSFER_DELAY enumeration>
{TRAFFICPRI}=<PRIORITY1|PRIORITY2|PRIORITY3>
{MAXGBRUPL}=<GPRS_BIT_RATE enumeration>
{MAXGBRDWL}=<GPRS_BIT_RATE enumeration>
{MAXEXTBRDWL}=<GPRS_EXT_BIT_RATE enumeration >
{MAXEXTGBRDWL}=<GPRS_EXT_BIT_RATE enumeration >
{MAXEXTBRUPL}=<GPRS_EXT_BIT_RATE enumeration >
{MAXEXTGBRUPL}=<GPRS_EXT_BIT_RATE enumeration >
{APN}=<Access Point Name>
{VPLMN}=<TRUE|FALSE>
{CHARGE}=<NONE|HOT|FLAT|PREPAID|NORMAL|3|5|6|7|9|…|254>
{STDCHARGE}=<NULL|a string of hexadecimal characters ranging from 0000 to FFFF>
{APNOITPLID}=<0-65534>
{CNXTID}=<2>
...........
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Parameter Description:
Example:
MOD NAM: IMSI="984519856312345", NAM=BOTH;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST NAM: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>,
{ISDN}=<MSISDN number>,
{NAM}=<BOTH|MSC|SGSN|NONE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD OCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the O-CSI data, the command will modify the O-CSI data.
Example:
MOD TCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the T-CSI data, the command will modify the T-CSI data.
Example:
MOD VTCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the VT-CSI data, the command will modify the VT-CSI data.
Example:
MOD UCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the U-CSI data, the command will modify the U-CSI data.
Example:
MOD SSCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the CSI data, the command will modify the CSI data.
Example:
MOD TIFCSI: ISDN="987654321",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the TIF-CSI data, the command will modify the TIF-CSI data.
Example:
MOD MCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the M-CSI data, the command will modify the M-CSI data.
Example:
MOD SMSCSI: ISDN="987654321", PROV=TRUE, MOMTSWITCH=MOSMSCSI,
TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to FALSE, the parameters MOMTSWITCH and TPLID do not need
to be specified.
If the parameter PROV is set to TRUE, the parameters MOMTSWITCH and TPLID must be
specified. If the data record of a subscriber already has the SMS-CSI data, the command will modify
the SMS-CSI data.
Example:
MOD GPRSCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the GPRS-CSI data, the command will modify the GPRS-CSI data.
Example:
MOD DCSI: ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter TPLID does not need to be specified.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. If the data record
of a subscriber already has the D-CSI data, the command will modify the D-CSI data.
subscription information
IM-O-CSI: originating CAMEL
subscription information for IMS
IM-VT-CSI: VMSC terminating
CAMEL subscription information
for IMS
Example:
LST CSI: ISDN="987654321", CSITYPE=ALL;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CSITYPE}=<CSI type>
{TPLID}=<Template ID> (if present)
{STATE}=<TRUE|FALSE>
.......
{CSITYPE}=<CSI type>
{TPLID}=<Template ID> (if present)
{STATE}=<TRUE|FALSE>
{CSITYPE}=TIFCSI
{TIFCSI}=PROV (if present)
{STATE}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The parameter CSITYPE is optional. If the parameter CSITYPE is not specified, the data of all the
subscribed CSI services is displayed.
Example:
SND CANCELC: IMSI="984519856312345",VLRNO="123456789",CHECK=FALSE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the parameter VLRNO or SGSNO is specified, the parameter CHECK must be specified.
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter DEST is set to VLR, the parameter SGSNO cannot be specified.
If the parameter DEST is set to SGSN, the parameter VLRNO cannot be specified.
Example:
MOD SMDP: IMSI="444441234567890", SMDP=MSC;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The command is applied only to the subscriber whose NAM is BOTH.
Example:
LST SMDP: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ShortMessageParameter}=<"Sent via MSC when GMSC does not support GPRS"|"Sent via
SGSN when GMSC supports GPRS">;
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD LCS: IMSI="984519856312345",PROV=TRUE,TPLID=123;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter TPLID must be specified. Otherwise, the
parameter TPLID does not need to be specified.
Example:
LST LCS: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{TPLID}=<Template id>;
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CATEGORY: IMSI="984519856312345",CATEGORY=COMMON;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The command is applied only to the subscriber whose NAM is GSM or BOTH.
Example:
LST CATEGORY: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{MSISDN}=<MSISDN Number>
{CATEGORY}=<UNKNOWN|FRENCH|ENGLISH|GERMAN|RUSSIAN|SPANISH|
SPECIAL|RESERVE|COMMON|SUPERIOR|DATACALL|TESTCALL|SPARE|
PAYPHONE|COIN|"16"|…|"31"|"33"|…|"254">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Enumeration"
CFDNRTI Numeral 5-60 seconds Specifies the no-reply time for triggering the C
ME CFD.
It can be 5, 10, 15, 20, 25, 30, 35, 40, 45, 50,
55, or 60 seconds.
SUPSHORT Boolean TRUE Specifies whether the forwarded-to number C
NUM FALSE registered for the CFD service is a short
number.
TRUE: The forwarded-to number is a
short number.
FALSE: The forwarded-to number is not a
short number.
ACTCFD Boolean TRUE Specifies whether the HSS9860 activates the C
FALSE CFD service.
TRUE: The HSS9860 activates the CFD
service.
FALSE: The HSS9860 does not activate
the CFD service.
CB Enumerated BAOC Specifies the type of the call barring (CB) O
BOIC services.
BOICEXHC
BAOC: barring of all outgoing Calls
BAIC
BOIC: barring of outgoing international
calls
BICROAM
BOICEXHC: barring of outgoing
BORO international calls except those directed
to the home PLMN country
BAIC: barring of all incoming calls
BICROAM: barring of incoming calls
when roaming outside home PLMN
country
BORO: barring of outgoing calls when
roaming outside home PLMN country
CBCOU Enumerated OPERATOR Specifies which party controls the CB C
SUBSCRIBER services.
OPERATOR: The carrier controls the
registration, activation, deregistration,
and deactivation of the CB services
through the Web UI.
SUBSCRIBER: Both the carrier and the
subscriber can control the registration,
activation, deregistration, and
deactivation of the CB services. The
subscriber can control the CB services
through the MS.
service.
FALSE: The HSS9860 does not enable the
HOLD service.
MPTY Boolean TRUE Specifies whether the HSS9860 enables the O
FALSE multiparty (MPTY) service.
TRUE: The HSS9860 enables the MPTY
service.
FALSE: The HSS9860 does not enable the
MPTY service.
AOC Enumerated NONE Specifies whether the HSS9860 provides the O
AOCI advice of charging (AOC) service.
AOCC
NONE: The HSS9860 does not provide
the AOC service.
AOCI: The HSS9860 provides the advice
of charge information (AoCI) service.
AOCC: The HSS9860 provides the advice
of charge charging (AoCC) service.
PLMNSPE Character PLMN-SS-1 Specifies the type of the PLMN-specific O
CSS string PLMN-SS-2 supplementary service. You can select one or
multiple services. If you select multiple
PLMN-SS-3 services, insert the & symbol between the
PLMN-SS-4 services. See PLMN-SS-CODE for
PLMN-SS-5 meanings of the enumerations.
PLMN-SS-6
PLMN-SS-7
PLMN-SS-8
PLMN-SS-9
PLMN-SS-A
PLMN-SS-B
PLMN-SS-C
PLMN-SS-D
PLMN-SS-E
PLMN-SS-F
ALLPLMN-SS
ODBSS Boolean TRUE Specifies whether the HSS9860 provides the O
FALSE ODB-Barring of supplementary services
access (ODB-SS) service.
TRUE: The HSS9860 provides the ODB-
SS service.
FALSE: The HSS9860 withdraws the
ODB-SS service.
ODBOC Enumerated NOBOC Specifies the type of the ODB-outgoing call. O
NSMSIN service.
SCPADD Character 1-15 Service control point address C
string
SKEY Numeral 0-2147483647 NSMSIN service key C
DP Enumerated MO Specifies the detection point where the IN C
MT service is triggered for the short message
service.
SR
MO: The IN service is triggered when the
SMS is originated.
MT: The IN service is triggered when the
SMS is terminated.
SR: The IN service is triggered when the
status report is delivered.
TAMM Boolean TRUE Specifies whether the IN service is triggered C
FALSE for all short messages.
TRUE: The IN service is triggered.
FALSE: The IN service is not triggered.
DEFAULTO Numeral 0-65534 OFA template ID C
FA_ID
STNSR Character 3-15 Specifies a session transfer number for O
string SRVCC (STNSR) used by the MME to
obtain the PS-to-CS path session transfer.
ICSIND Boolean TRUE Specifies whether the HSS9860 provides the O
FALSE ICS.
TRUE: The HSS9860 provides the ICS.
FALSE: The HSS9860 does not provide
the ICS service.
APNOI Character 1-63 Specifies the operator identifier of an APN. O
string
AMBRMA Numeral 0-2^32-1 Specifies the maximum upload bandwidth of C
XUL a UE.
AMBRMA Numeral 0-2^32-1 Specifies the maximum download bandwidth C
XDL of a UE.
RATFREQS Numeral 1-256 Specifies the priority of an RAT frequency. O
ELPRIID
PLMNTPLI Numeral 0-65534 VPLMN roaming restrict template ID O
D
DIAMNOD Numeral 0-65534 Diameter node roaming restrict template ID O
ETPL_ID
CPP Boolean TRUE Specifies whether the HSS9860 provides the C
N string
VOWIFI_T Enumerated VoWIFI Specifies whether a subscriber is a non- O
AG Non_VoWIFI 3GPP subscriber is a VoWiFi subscriber.
TRUE: The subscriber is a VoWiFi
subscriber.
FALSE: The subscriber is not a VoWiFi
subscriber.
SWXPLMN Numeral 0-65534 Specifies the ID of a PLMN-specific O
TPLID roaming restriction template to be used over
the SWx interface to restrict the roaming of a
subscriber connected to an EPC network
from a non-3GPP network.
EPSODBP Enumerated NOBPOS Specifies whether the HSS9860 bars packet O
OS BAPOS oriented services (POS) from EPS
subscribers.
BHPLMNAPRO
AM
NOBPOS: The HSS9860 does not bar
POS services from EPS subscribers.
BALLAPROAM
BAPOS: The HSS9860 bars all POS
services from EPS subscribers.
BHPLMNAPROAM: The HSS9860 bars
POS services when subscribers are
roaming in a VPLMN but still connect to
the network from an access point within
the HPLMN.
BALLAPROAM: The HSS9860 bars
POS services when subscribers are
roaming in a VPLMN and connect to the
network from an access point within the
VPLMN.
ETICK Numeral 1-999 ETICK service key O
MAPADDR Numeral 0-65534 MAP address restriction template ID O
RESTPLID
ARBT Numeral 1-65535 ARBT index O
ODBENTE Boolean TRUE Specifies whether the HLR delivers the O
ROAM FALSE ODB-ENTE service data when subscribers
are roaming.
TRUE: The HLR delivers this service data
when subscribers are roaming.
FALSE: The HLR does not deliver this
service data when subscribes are
roaming.
ODBINFO Boolean TRUE Specifies whether the HLR delivers the O
ROAM FALSE ODB-INFO service data when subscribers
are roaming.
Example:
ADD SUB: HLRSN=2, IMSI="435670998956956", ISDN="9876534345",
CARDTYPE=USIM, TS=TS11&TS21;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameter HLRSN does not need to be specified or is set to the default value 255 if the current
SMU server is a common version. The parameter HLRSN is a mandatory parameter if the current
SMU server is a redundant version and has no default value.
If the parameter RROption is set to RR_TEMPLATE, the parameter RRTPL is mandatory.
The parameters EMLPP_MAX and EMLPP_DEF must be specified or left blank together. If both
the parameters are specified, the value of EMLPP_DEF is less than or equal to that of
EMLPP_MAX.
If the parameters EMLPP_MAX and EMLPP_DEF are specified, the parameter MAN cannot be
set to OnlySGSN.
If the parameter ECATEGORY is specified, the parameter NAM cannot be set to OnlySGSN.
The value of the parameter UUS is in the format like UUS1, UUS2, and UUS3.
If the parameter SMSCF is set to FALSE, the parameter SMSCFOFAID does not need to be
specified.
If the parameter NAM is set to SGSN, the parameter MC does not need to be specified.
If the parameter MC is set to FALSE, the parameters NBRSB and NBRUSER do not need to be
specified.
The value of the parameter NBRSB is greater than or equal to that of NBRUSER.
If the parameter IST is set to TRUE, the parameters ISTTIMER and ISTRSP are mandatory.
If the parameter NIRPROV is set to TRUE, the parameter NIRINDEX is mandatory.
If the parameter CNAP is set to TRUE, the parameter CNAPOR is mandatory.
If the parameter IMEILCKPROV is not set to TRUE, the parameter IMSIIMEIBIND does not
need to be specified. And if the parameter IMEILCKPROV is set to TRUE, the parameter
IMSIIMEIBIND is optional.
The parameter ETICK can be specified only if the parameter NAM is set to NONE.
The parameter DND can be specified only if the parameter NAM is set to MSC or BOTH.
Example:
MOD CUGSUB: IMSI="123454321234543", PROV=TRUE, INTERLOCK="12345678",
INDEX=999, BSG=TS1X&BS2X, INTRACUG=NO_CUGBAR;
or
MOD CUGSUB: IMSI="1234567891234", PROV=FALSE, INTERLOCK="12345678";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, this command is used to withdraw the CUG service. The
parameters INDEX, BSG and INTRACUG do not need to be specified.
If the parameter PROV is set to TRUE, this command is used to provide the CUG service or modify
the CUG service data. If this command is used to provide the CUG service, the parameters INDEX
and BSG are mandatory and INTRACUG is optional. The default value of INTRACUG is
NO_CUGBAR. If this command is used to modify the CUG service data, at least one of the
parameters INDEX, BSG and INTRACUG must be specified.
A subscriber is allowed to subscribe to up to ten interlock codes for the CUG service.
Example:
MOD CUGFTR: IMSI="123454321234543", PROV=TRUE, BSG=TS1X,
INTERCUG=ONLY_CUG, PRFCUGPROV=TRUE, PRFCUG=999;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, this command is used to remove a CUG feature list. The
parameters PREFERCUG, PRFCUGPROV and INTERCUG do not need to be specified.
If the parameter PROV is set to TRUE, this command is used to add a new CUG feature list or
modify the CUG feature data. If this command is used to add a new CUG feature list, the default
value of the parameter INTERCUG is ONLY_CUG.
The parameters PRFCUGPROV and PRFCUG must be specified or left blank together. If the
parameter PRFCUGPROV is set to TRUE, a preferred CUG is provided for a subscriber. If the
parameter PRFCUGPROV is set to FALSE, a preferential CUG is withdrawn from the subscriber.
A subscriber is allowed to subscribe to up to five CUG feature lists.
Example:
LST CUG: ISDN="955678112";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{ISDN}=<MSISDN Number>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
MOD NAEA: IMSI="444441234567890", PROV=TRUE,NAEA=39,NAEATYPE=BOTH;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
LST NAEA: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{MSISDN}=<MSISDN Number>
{NAEA}=<"PROV"|"NOTPROV">
{NAEA_CIC}=<0-9999>
{ NAEA_TYPE}={ BOTH|NATIONAL|INTERNATIONAL}
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the value of the parameter NAEA is in the range of 0-9999, the NAEA service is provided and the
actual NAEA value is displayed. If the parameter NAEA is set to FFFF, it indicates the NAEA
service is not provided and NOTPROV is displayed. The other values of the parameter NAEA are
invalid.
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
ADD KI: HLRSN=2, IMSI="111111111111111",
KIVALUE="12345678901234567890123456789012", K4SNO=12, CARDTYPE=USIM,
ALG=MILENAGE, OPCVALUE="FEDCAB123456789ABCDEF01234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The default value of the parameter K4SNO is 0, indicating that no K4 value is used to encrypt the
KI.
The parameters ALG and CARDTYPE must be specified together. The value of the parameter
ALG depends on that of the parameter CARDTYPE. The MILEANGE algorithm is also applicable
to the SIM card.
If the parameter ALG is set to MILENAGE, MILENAGE_2, or CUSTOM_1, the parameters
OPC and OPSNO are conditional parameters, and one of the two parameters must be specified. If
the parameter ALG is not set to MILENAGE, MILENAGE_2, or CUSTOM_1, the parameter
OPC does not need to be specified. If the parameter OPSNO is set to 0, no OP data is used.
The parameter HLRSN does not need to be specified or is set to the default value 255 if the current
PGW is a common version. The parameter HLRSN must be specified if the current PGW is a
redundant version. In this case, this parameter does not have a default value.
The parameter AMFSNO is a conditional parameter when CARDTYPE is set to USIM or ALG is
set to MILENAGE, MILENAGE_2, or CUSTOM_1.
The difference between MILENAGE_2 and MILENAGE is that different algorithms are used for
converting XRES of authentication quintuplets into SRES of authentication triplets.
Example:
LST KI: IMSI="123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{HLRSN}=< HLR Serial No in the redundant HLR center >,
{IMSI}=<IMSI Number>
{KIVALUE}=<KI Value>
{K4SNO}=<K4 Serial Number>
{CARDTYPE}=<SIM|USIM>
{ALG}=<Authentication Algorithm>;
{OPC}=<OPC value if it is applicable>
{OPSNO}={the serial number of OP for MEILEANGE algorithm}
Example:
RMV KI: IMSI="123456789";
Output:
For successful execution of the command, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
CHK KI: IMSI="123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{HLRSN}=< HLR Serial No in the redundant HLR center >,
{IMSI}=<IMSI Number>
{KIVALUE}=<KI Value>
{K4SNO}=<K4 Serial Number>
{CARDTYPE}=<SIM|USIM>
{ALG}=<Authentication Algorithm>;
{OPC}=<OPC value if it is applicable>
{OPSNO}={the serial number of OP for MEILEANGE algorithm}
{AMFNO}={the serial number of AMF}
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD CARDPARA: IMSI="111111111111111", K4SNO=12, CARDTYPE=USIM,
ALG=MILENAGE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
At least one of the parameters K4SNO, ALG, and CARDTYPE must be specified.
The parameters ALG and CARDTYPE must be specified together. The value of the parameter
ALG depends on that of the parameter CARDTYPE.
If the parameter ALG is set to MILENAGE, MILENAGE_2, or CUSTOM_1, the parameters
OPC and OPSNO are conditional parameters; that is, one of the two parameters must be specified.
If the parameter ALG is not set to MILENAGE, MILENAGE_2 or CUSTOM_1, the parameter
OPC does not need to be specified. If the parameter OPSNO is set to 0, no OP data is used.
The difference between MILENAGE_2 and MILENAGE is that different algorithms are used for
converting XRES of authentication quintuplets into SRES of authentication triplets.
replaced by CFD
CFBFTNPROPE Enumerated INTERNATIO Property of CFB FTN replaced by O
RTY NAL CFD
NATIONAL INTERNATIONA: The FTN is an
international number.
NATIONAL: The FTN is a
national number.
CFNRYFTN Character string 1-16 Forwarded-to number of CFNRy C
replaced by CFD
CFNRYFTNPRO Enumerated INTERNATIO Property of CFNRy FTN replaced by O
PERTY NAL CFD
NATIONAL INTERNATIONA: The FTN is an
international number.
NATIONAL: The FTN is a
national number.
CFNRCFTN Character string 1-16 Forwarded-to number of CFNRc C
replaced by CFD
CFNRCFTNPRO Enumerated INTERNATION Property of CFNRc FTN replaced by O
PERTY AL, CFD
NATIONAL
BSG Enumerated ALL Specifies the basic service group of C
TS1X BAIC service.
TS6X
ALL: all applicable services
(TS1X, TS6X, BS2X, BS3X, and
BS2X TSDX)
BS3X TS1X: telephony service
TSDX TS6X: facsimile service group
BS2X: asynchronous bearer service
BS3X: synchronous bearer service
TSDX: custom supplementary
service
NRTIME Numeral 5-60 seconds No reply timer. C
It can be 5, 10, 15, 20, 25, 30, 35, 40,
45, 50, 55, or 60 seconds.
SUPSHORTNU Boolean TRUE Specifies whether the forwarded-to C
M FALSE number registered for the CFD
service is a short number.
TRUE: The forwarded-to number is
a short number.
FALSE: The forwarded-to number
is not a short number.
ACTCFD Boolean TRUE Specifies whether the HSS9860 C
Example:
MOD CFD: IMSI="123454321234543", PROV=TRUE,
VALIDCCF=CFB&CFNRy&CFNRc, SUPINTERCFD=TRUE, NFS=TRUE, NCS=TRUE,
FTN="123456789", BSG=TS1X, NRTIME=30;
Or
MOD CFD:IMSI="123454321234543",PROV=FALSE,
VALIDCCF=CFB&CFNRy&CFNRc;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to TRUE, the parameters VALIDCCF, SUPINTERCFD, NFS, NCS,
and FTN are optional. If the parameter PROV is set to TRUE and the parameter FTN is specified,
the parameters BSG and NRTIME are optional. If the parameter PROV is set to TRUE and the
parameter FTN is not specified, the parameters BSG and NRTIME do not need to be specified.
If the parameter PROV is set to TRUE, this command is used to provide and register the CFD
service.
If the parameter PROV is set to FLASE, the parameters SUPINTERCFD, NFS, NCS, FTN, and
NRTIME do not need to be specified and the parameters BSG and VALIDCCF are optional, but
only one of the parameters BSG and VALIDCCF can be specified.
If the parameter PROV is set to FLASE, this command is used to withdraw and erase the CFD
service.
Example:
MOD ODBRCF: IMSI="984519856312345", ODBRCF=NOBRCF;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
MOD ODBECT: IMSI="984519856312345", ODBECT=NOBECT;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The parameters ODBECT, ODBDECT, and ODBMECT are conditional. Specify at least one of
them.
Example:
MOD BORO: IMSI="444441234567890",PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, this command is used to withdraw the BORO service for a
subscriber.
If the parameter PROV is set to TRUE, this command is used to provide the BORO service for a
subscriber.
Example:
ACT BORO: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
Example:
DEA BORO: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The default value of the parameter BSG is ALL.
MAXGBRU Enumerated See 10.26GPRS QoS Maximum guaranteed bit rate for C
PL Enumeration Value for uplink
GPRS_BIT_RATE
MAXEXTG Enumerated See 10.27GPRS QoS Maximum extended guaranteed C
BRDWL Enumeration Value for bit rate for downlink
GPRS_EXT_BIT_RATE
MAXGBRD Enumerated See 10.26GPRS QoS Maximum guaranteed bit rate for C
WL Enumeration Value for downlink
GPRS_BIT_RATE
APN Character string 2-63 Access point name C
VPLMN Boolean TRUE Specifies whether APN of C
FALSE VPLMN is allowed to be
accessed.
TRUE: VPLMN can be
accessed.
FALSE: Only the APN of
HPLMN can be accessed but
VPLMN cannot be accessed.
CHARGE Enumerated NONE Specifies the charging C
HOT characteristics.
FLAT
NONE: disable the settings on
global charging characteristics
PREPAID
HOT: hot billing charging
NORMAL
FLAT: flat rate charging
3
PREPAID: prepaid charging
5
NORMAL: normal charging
6
3: hot billing charging and flat
7 rate charging
9 5: hot billing charging and
10 prepaid charging
11 6: flat rate charging and prepaid
12 charging
13
7: hot billing charging, flat rate
charging, and prepaid charging
14
9: hot billing charging and
15 normal charging
16-254 10: flat rate charging and
normal charging
11: hot billing charging, flat rate
charging, and normal charging
12: prepaid charging and normal
charging
Example:
MOD GPRS: IMSI="123456789",
CHARGE_GLOBAL=PREPAID,PROV=TRUE,CNTXID=1,PDPTYPE=IPV4,PDPADD="1
0.64.12.11",ADDIND=STATIC,RELCLS=ACKALLPRODT,DELAYCLS=DELAY1,PRECL
S=HIGH,PEAKTHR=1,MEANTHR=1,APN="APN",VPLMN=TRUE,CHARGE=PREPAID;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the parameter PROV is set to TRUE, this command is used to provide or modify the specified
PDP data. If the parameter PROV is set to FALSE, this command is used to delete the specified
PDP data.
If the parameter PROV is set to TRUE and the parameter CNTXID is specified, this command is
used to modify the PDP data, and all the conditional parameters except IMSI and ISDN are
optional. If these optional parameters are not specified when running this command, the old values
of these parameters are retained.
If the parameter PROV is set to TRUE and the parameter CNTXID is not specified, this command
is used to add new PDP data.
If the parameter PROV is set to FALSE and the parameter CNTXID is specified, this command is
used to delete the specified PDP data and all the conditional parameters excepting IMSI and ISDN
do not need to be specified. If there is no PDP data after deletion, the GPRS service is withdrawn.
If the parameter PROV is set to FALSE and the parameter CNTXID is not specified, an error code
is returned.
IMSI and ISDN are mutually exclusive. Specify only one of them.
For details on the enumerated values of GPRS_BIT_RATE, GPRS_EXT_BIT_RATE,
GPRS_MEAN_THROUGHPUT, GPRS_PEAK_THROUGHPUT, GPRS_SDU_SIZE,
GPRS_RESIDUAL_BER, GPRS_SDU_ERROR_RATE, and GPRS_TRANSFER_DELAY, see
10Common Enumerations.
The parameter PDPTYPE must be specified if the parameter PDPADD is specified.
Example:
MOD PLMNSS: IMSI="123454321234543", PROV=TRUE, PLMNSPECSS=PLMN-SS-1;
Or
MOD PLMNSS: IMSI="1234567891234", PROV=FALSE, PLMNSPECSS=PLMN-SS-
1&PLMN-SS-2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, this command is used to withdraw several PLMN specific-
SS.
If the parameter PROV is set to TRUE, this command is used to provide several PLMN specific-SS.
Example:
MOD ALS: IMSI="984519856312345",PROV=TRUE,LINE2NUM="1234567890123";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The ALS service can not be provided to a GPRS subscriber.
If the parameter PROV is set to FALSE, this command is used to withdraw the ALS service.
If the parameter PROV is set to TRUE, this command is used to provide the ALS service.
Example:
LST ALS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
<ALS>=<"PROV"|"NOTPROV">
<LINE2NUM>=< MSISDN Number For Line2 of Alternative Line Service >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD VVDN: IMSI="444441234567890", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
LST VVDN: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
<VVDN>=<"PROV"|"NOTPROV">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
MOD RBT: IMSI="444441234567890",PROV=TRUE,RBT=6;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the RBT service.
If the parameter PROV is set to TRUE, this command is used to provide the RBT service.
Example:
LST RBT: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{RBT}=<"PROV"|"NOTPROV">
{RBTIndex}=< INAP INDEX for Ring Back Tone service>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
Example:
MOD ODBPOS: IMSI="984519856312345", ODBPOS=BAPOS,
ODBPOSTYPE=NetworkInit;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EMLPP: IMSI="444441234567890",PROV=TRUE, EMLPP_MAX=priorityLevel0,
EMLPP_DEF=priorityLevel0;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the eMLPP service.
If the parameter PROV is set to TRUE, the parameters EMLPP_MAX and EMLPP_DEF are
mandatory and the value of EMLPP_DEF must be less than or equal to that of EMLPP_MAX.
Example:
LST EMLPP: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{EMLPP}=<"PROV"|"NOTPROV">
{EMLPP_MAX}=<priorityLevel0|priorityLevel1|priorityLevel2|priorityLevel3|
priorityLevel4>,
{EMLPP_DEF}=<priorityLevel0|priorityLevel1|priorityLevel2|priorityLevel3|
priorityLevel4>;
{EMLPP_COU}=<SUBSCRIBER| OPERATOR>;
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ECATEGORY: IMSI="444441234567890",PROV=TRUE, ECATEGORY=6;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to FALSE, this command is used to withdraw the ECATEGORY and
the ECATOPTION services.
If the parameter PROV is set to TRUE, this command is used to provide the ECATEGORY or the
ECATOPTION service.
Example:
LST ECATEGORY: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{ECATEGORY}=< 1-254|"NOTPROV">
{ECATOPTION}=<1-127>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ARD: IMSI="444441234567890", PROV=TRUE,UTRANNOTALLOWED=FALSE,
GERANNOTALLOWED=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameters UTRANNOTALLOWED and
GERANNOTALLOWED must be specified or not specified together.
Example:
LST ARD: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{ARD}=<PROV|NOTPROV>
{UTRANNOTALLOWED}=<FALSE|TRUE>
{GERANNOTALLOWED}=<FALSE|TRUE>
{GANNOTALLOWED}=<FALSE|TRUE>
{IHSPAENOTALLOWED}=<FALSE|TRUE>
{EUTRANNOTALLOWED}=<FALSE|TRUE>
{N3GPPNOTALLOWED}=<FALSE|TRUE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CARP: IMSI="444441234567890",PROV=TRUE, CARP=6;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter PROV is set to TRUE, this command is used to provide the CARP service.
If the parameter PROV is set to FALSE, this command is used to withdraw the CARP service.
Example:
LST CARP: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{CARP}=<1-255|"NOTPROV">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD RSZI: IMSI="444441234567890", RROption=ONLY_HPLMN;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter RROption is set to RR_TEMPLATE, the parameter RRTPL is mandatory.
Function: This command is used to query the regional subscription zone identity (RSZI)
service data of subscribers.
Parameter Description:
Example:
LST RSZI: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= < IMSI Number >,
{ISDN}=< MSISDN Number >,
{RROption}=< ALL_PLMNS | ONE_NPLMN_ALL_FPLMNS | ONLY_HPLMN
| RR_TEMPLATE >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD BS: IMSI="444441234567890",BS20=TRUE, BS25=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command is applicable only to the subscriber whose NAM is BOTH or MSC.
EIN service.
OSK Numeral 1-999 EOCSI service key C
TSKPROV Boolean TRUE Specifies whether the HSS9860 provides the C
FALSE ETCSI service.
TRUE: The HSS9860 provides the
ETCSI service.
FALSE: The HSS9860 withdraws the
ETCSI service.
TSK Numeral 1-999 ETCSI service key C
ETCSICONVER Boolean TRUE Specifies whether the HSS9860 provides an C
_PROV FALSE ETCSI conversion template.
TRUE: The HSS9860 provides the
ETCSI conversion template.
FALSE: The HSS9860 does not provide
the ETCSI conversion template.
ETCSICONVER Numeral 0-65534 ETCSI conversion template ID C
_TPLID
BOSKPROV Boolean TRUE Specifies whether the HSS9860 provides the C
FALSE BEOCSI service.
TRUE: The HSS9860 provides the
BEOCSI service.
FALSE: The HSS9860 withdraws the
BEOCSI service.
BOSK Numeral 1-999 BEOCSI service key C
EOICKPROV Boolean TRUE Specifies whether the HSS9860 provides the C
FALSE EOICK service.
TRUE: The HSS9860 provides the
EOICK service.
FALSE: The HSS9860 withdraws the
EOICK service.
EOICK Numeral 1-999 EOICK service key C
ETICKPROV Boolean TRUE Specifies whether the HSS9860 provides the C
FALSE ETICK service.
TRUE: The HSS9860 provides the
ETICK service.
FALSE: The HSS9860 withdraws the
ETICK service.
ETICK Numeral 1-999 ETICK service key C
Example:
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
At least one of the parameters OSKPROV, TSKPROV, BOSKPROV and EOICKPROV must be
specified.
Example:
LST EIN: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >
{ISDN}=< MSISDN Number >
OSK=<VALUE >
TSK=<VALUE >
ETCSICONVER_TPLID=<0-65534>
BOSK=<VALUE >
EOICK=<VALUE >
ETICK=<VALUE >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TPLVBS: IMSI="444441234567890",PROV=TRUE, TPLID=1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
The parameter TPLID is specified only when the parameter PROV is set to TRUE.
Example:
MOD VBS: IMSI="444441234567890", CAPINTVBSONROAMING=FALSE,
OPTYPE=DELETE, COUNT=1, GROUPID1="1";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
If the parameter OPTYPE is set to MODIFY, the parameter COUNT must be set to 1 and the
parameters GROUPID and CAPINITVBS must be specified.
If the parameter OPTYPE is set to DELETE, the parameter COUNT must be set to 1 and the
parameter GROUPID must be specified.
Example:
LST VBS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CAPINITVBSONROAMING}=<CapInitVBSOnRoaming>
{GROUPID1}=<VBS GroupID1>
{CAPINITVBS1}=<TRUE|FALSE>
{GROUPID2}=<VBS GroupID2>
{CAPINITVBS2}=<TRUE|FALSE>
……
{GROUPID50}=<VBS GroupID50>
{CAPINITVBS50}=<TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TPLVGCS: IMSI="444441234567890",PROV=TRUE, TPLID=1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
The parameter TPLID is specified only when the parameter PROV is set to TRUE.
Example:
MOD VGCS: IMSI="444441234567890", CAPINTVGCSONROAMING==FALSE,
OPTYPE=DELETE, COUNT=1, GROUPID1="1";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter OPTYPE is set to DELETE, the parameter COUNT must be set to 1.
Example:
LST VGCS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CAPINITVGCSONROAMING}=<CapInitVGCSOnRoaming>
{GROUPID1}=<VGCS GroupID1>
{GROUPID2}=<VGCS GroupID2>
……
{GROUPID50}=<VGCS GroupID50>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Parameter Description:
Example:
MOD RMPY: RMNUM="955589", PROV=TRUE, FUNCDESC="funcdesc",
CORSET=COR_2&COR_4&COR_20&COR_22, FFNADDRESS="8613911111";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the parameter PROV is set to FALSE, the parameters FUNCDESC, CORSET, and
FFNADDRESS do not need to be specified.
A remote subscriber can add a maximum of 255 initial subscribers and 255 supervisors.
Example:
LST RMPY: RMNUM="955589";
Output:
If the operation succeeds, the system displays an output with the following format:
{HLRSN}=< HLR Serial No in the redundant HLR center >
{RMNUM}=<specific remote party number>
{FUNCDest}=<Description for Remote party>
{CORSet}={COR_x1 & COR_x2…}
{FFN_Address }=< FFN's Address >
{InitiatingNumber}=< specific Initiating number which is registered to remote party>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD FM: IMSI="123456789", PROV=TRUE, TYPE=Initiating subscriber,
CORSET=COR_3&COR_5&COR_62&COR_164;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST FM: IMSI="123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{Type}=< Initiating subscriber | Supervisor >
{CORSet}={COR_x1 & COR_x2…}
{Remote Number registered to }={ remote party's MSISDN }
=… …
=… …
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
SND FMNOTIFY: RMNUM="955589", INITNUM="861386559";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD AUTHUSER: HLRSN=1, RMNUM="955589", PROV=TRUE, TYPE=Initiating
subscriber, INITNUM="861386559";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
LST AUTHUSER: RMNUM="955589", TYPE=Initiating subscriber;
Output:
If the operation succeeds, the system displays an output with the following format:
{HLRSN}=< HLR Serial No in the redundant HLR center >
{RMNUM} = <specific remote party number>
{Type} = < Initiating subscriber | Supervisor >
{ISDN}=< MSISDN1>,
=< MSISDN2>,
=< MSISDN3>,
……
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD FMREG: OPTION=Register, RMNUM="955589", INITNUM="861386559";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD UUS: IMSI="460000009123456", PROV=TRUE, UUS=UUS2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST UUS: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{UUS1}=<"PROV"|"NOTPROV">
{UUS2}=<"PROV"|"NOTPROV">
{UUS3}=<"PROV"|"NOTPROV">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CF:IMSI="123454321234543",CFUPROV=TRUE,OFAID=2,NFS=TRUE,
NCS=TRUE, COU=OPERATOR;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH or MSC.
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one of the parameters CFUPROV, CFBPROV, CFNRYPROV, and CFNRCPROV must
be specified.
If the parameter CFBPROV or CFNRYPROV is set to TRUE, the parameters NCS, NFS, COU
and OFAID are optional. If the parameter CFUPROV is set to TRUE, the parameters NCS, COU
and OFAID are optional. If the parameter CFNRCPROV is set to TRUE, the parameters NCS,
COU and OFAID are optional.
If the parameters CFUPROV, CFBPROV, CFNRYPROV, and CFNRCPROV are set to FALSE,
the parameters NCS, NFS, COU, and OFAID do not need to be specified.
Example:
MOD TS: IMSI="444441234567890", TS11=TRUE, TS21=TRUE, TS61=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH or MSC.
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one of the parameters TS11, TS21, TS22, TS61, and TS62 must be specified.
ODB-PB3 service.
FALSE: The HSS9860 withdraws
the ODB-PB3 service.
ODBPB4 Boolean TRUE Specifies whether the HSS9860 C
FALSE provides the operator-determined
barring of PLMN specific barring type
4 (ODB-PB4) service.
TRUE: The HSS9860 provides the
ODB-PB4 service.
FALSE: The HSS9860 withdraws
the ODB-PB4 service.
ODBENTE Boolean TRUE Specifies whether the HSS9860 C
FALSE provides the operator-determined
barring of outgoing entertainment calls
(ODB-ENTE) service.
TRUE: The HSS9860 provides the
ODB-ENTE service.
FALSE: The HSS9860 withdraws
the ODB-ENTE service.
ODBINFO Boolean TRUE Specifies whether the HSS9860 C
FALSE provides the operator-determined
barring of outgoing information calls
(ODB-INFO) service.
TRUE: The HSS9860 provides the
ODB-INFO service.
FALSE: The HSS9860 withdraws
the ODB-INFO service.
ODBROAM Enumerated NOBAR Specifies the type of operator- C
BROHPLMN determined barring of roaming (ODB-
ROAM) services.
BROHPLMNC
NOBAR: not bar roaming
BROHPLMNCGPR
S
BROHPLMN: bar roaming when
the subscriber is roaming outside
the home PLMN
BROHPLMNC: bar roaming when
the subscriber is roaming outside
the home PLMN country
BROHPLMNCGPRS: bar GPRS
when the subscriber is roaming
outside the home PLMN country
ODBRCF Enumerated NOBRCF Specifies the type of operator- C
BRACF determined registration of call
forwarding (ODB-RCF) services.
BRICFEXHC
NOBRCF: not bar the registration of
BRICF forwarded-to numbers (FTNs)
Example:
MOD ODB: IMSI="460013907550001", ODBSS=TRUE, ODBIC=NOBIC,
ODBOC=BAOC, ODBECT=NOBECT, ODBDECT=TRUE, ODBPOS=NOBPOS,
ODBPOSTYPE=BOTH;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
When providing the ODB-POS service for the subscriber, the parameters ODBPOS and
ODBPOSTYPE must be specified together. When modifying the ODB-POS service, one of the
parameters ODBPOS or ODBPOSTYPE must be specified.
At least one type of the ODB services must be provided or withdrawn.
Example:
MOD PRERES: IMSI="460013907550001", CLIP=TRUE, CLIPOVERRIDE=TRUE,
CLIR=TRUE, CLIRMODE=PERMANENT, COLP=TRUE, COLPOVERRIDE=TRUE,
COLR=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter CLIP is set to TRUE, the parameter CLIPOVERRIDE must be specified.
If the parameter COLP is set to TRUE, the parameter COLPOVERRIDE must be specified.
If the parameter CLIR is set to TRUE, the parameter CLIRMODE must be specified.
CCBS Boolean
TRUE Specifies whether the HSS9860 C
FALSE provides the CCBS service.
TRUE: The HSS9860 provides the
CCBS service.
FALSE: The HSS9860 withdraws
the CCBS service.
CCBSTARGET Boolean
TRUE Specifies whether the HSS9860 C
FALSE provides the CCBSTARGET service.
TRUE: The HSS9860 provides the
CCBSTARGET service.
FALSE: The HSS9860 withdraws
the CCBSTARGET service.
Example:
MOD OSS: IMSI="444441234567890",CWAIT=TRUE,ACTCWAIT=TS1X, HOLD=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one of the parameters CWAIT, HOLD, MPTY, AOCC, AOCI, ECT, CCBS,
CCBSTARGET and ACTDEACWAIT must be specified.
If the parameter CWAIT is set to TRUE, the parameter ACTDEACWAIT is optional and can only
be set to ACT. If the parameter CWAIT is set to FALSE, the parameter ACTDEACWAIT does not
need to be specified. If the parameter CWAIT is not specified, the parameter ACTDEACWAIT is
optional.
If the parameter ACTDEACWAIT is specified, the parameter ACTDEACWAITBSG must be
specified. If the parameter ACTDEACWAIT is not specified, the parameter
ACTDEACWAITBSG does not need to be specified.
Before providing the MPTY or ECT services for a subscriber, the HOLD service must be provided
for the subscriber first.
The parameters AOCC and AOCI are mutually exclusive. They cannot be set to TRUE at the same
time.
Example:
LST OSS: IMSI="444441234567890", DETAIL=TRUE;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
CWAIT
{BSG}=<Basic Service Group1>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group2>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group3>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group4>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group5>
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{BSG}=<Basic Service Group6>.
{CWAIT}=<"PROV"|"NOTPROV"|"ACT">
{HOLD} =<"PROV"|"NOTPROV">
{MPTY} =<"PROV"|"NOTPROV">
{AOCC} =<"PROV"|"NOTPROV">
{AOCI}=<"PROV"|"NOTPROV">
{ECT}=<"PROV"|"NOTPROV">
{CCBS}=<"PROV"|"NOTPROV">
{CCBSTARGET}=<"PROV"|"NOTPROV">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CB: IMSI="444441234567890",BAOC=TRUE, BOIC=TRUE, BOICEXHC=TRUE,
BORO=TRUE, BAIC=TRUE, BICROM=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one of the parameters BAOC, BOIC, BOICEXHC, BORO, BAIC, and BICROM must be
specified.
VT-IM-CSI service.
FALSE: The HSS9860 withdraws
the VT-IM-CSI service.
IMVTCSITPLID Numeral 0-65534 VT-IM- CSI template ID C
Example:
MOD CAMEL: IMSI="444441234567890", OCSIPROV=TRUE, OCSITPLID=1,
TCSIPROV=TRUE, TCSITPLID=1,VTCSIPROV=TRUE,
VTCSITPLID=1,UCSIPROV=TRUE, UCSITPLID=1, SSCSIPROV=TRUE,
SSCSITPLID=1, TIFCSIPROV=TRUE, MCSIPROV=TRUE, MCSITPLID=1,
MOSMSCSIPROV=TRUE, MOSMSCSITPLID=1, MTSMSCSIPROV=TRUE,
MTSMSCSITPLID=1, GPRSCSIPROV=TRUE ,GPRSCSITPLID=1, DCSIPROV=TRUE
,DCSITPLID=1, IMOCSIPROV=TRUE , IMOCSITPLID=1, IMVTCSIPROV=TRUE ,
IMVTCSITPLID=1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
At least one type of the CAMEL services must be provided or withdrawn.
If a CSI service is provided for a subscriber, the corresponding template ID must be specified. If a
CSI service is withdrawn for a subscriber, the corresponding template ID does not need to be
specified.
Example:
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD SMSCF: IMSI="460000009123456", PROV=TRUE, OFAID=1;
MOD SMSCF: IMSI="460000009123456", PROV=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
The parameter OFAID is specified only when the parameter PROV is set to TRUE.
Example:
ACT SMSCF: IMSI="460000009123456", ACTIVE=TRUE, FTN="86139998898",
PROPERTY=INTERNATIONAL;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter ACTIVE is set to TRUE, the parameters FTN and PROPERTY are mandatory.
Example:
LST SMSCF: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{OFATPLID}=<OFA template ID>
{FTN}=<Forward to Number>
{STATUS}=<"PROV"|"NOTPROV"|"REG"|"ACT"|"QUICENT">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD MC: IMSI="460000009123456", PROV=TRUE, NBRSB=3, NBRUSER=3;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter MC is set to FALSE, the parameters NBRSB and NBRUSER do not need to be
specified.
The value of the parameter NBRSB is greater than or equal to that of NBRUSER.
Example:
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD IST: IMSI="465700000000000", PROV=TRUE, ISTTIMER=20, ISTRSP=EMPTY;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameters ISTTIMER and ISTRSP are mandatory for
the IST subscription and are optional for the IST modification.
If the parameter PROV is set to FALSE, ISTTIMER and ISTRSP cannot be specified together.
Example:
LST IST: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{IST}=<NOTPROV|PROV >
{ISTTIMER}=<15-255>
{ISTRSP}=< EMPTY | NEW_ALERT_TIMER |
TERMINATECALLACTIVITYREFERRED | TERMINATEALLCALLACTIVITIES ||
WITHDRAW >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
SND ISTCMD: IMSI="984519856312345",MSCNUM="123456789";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD DIC: IMSI="460111111111111", PROV=TRUE, DICLENGTH=DICR_0;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:The operation is successful.
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter DICLENGTH must be specified.
Example:
LST DIC: IMSI="460111111111111";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>,
{ISDN}=<MSISDN number>,
{Provide}=<TRUE|FALSE>
{ ACCLENGTH }=< 0-16|127 >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD MIMSI: IMSI="460111111111111", PROV=TRUE, OPTIONTYPE=ADD,
MIMSITYPE=MultiIMSI, IMSI2="460222222222222", CALL_INDEX2=3;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:The operation is successful.
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST MIMSI: IMSI="460111111111111";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CALL_INDEX}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 >
{MULTIIMSI}=<"PROV"|"NOTPROV">
{IMSI2}=<IMSI Number 2>
{CALL_INDEX}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI3=<IMSI Number 3>
{CALL_INDEX} =< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI4}= <IMSI Number 4>
{CALL_INDEX}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI5}=<IMSI Number 5>
{CALL_INDEX}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI6}= <IMSI Number 6>
{CALL_INDEX} =< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI7}=<IMSI Number 7>
{CALL_INDEX }= < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI8}=<IMSI Number 8>
{CALL_INDEX }= < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{IMSI9}=<IMSI Number 9>
{CALL_INDEX }= < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9>
{VOICENUMBER1}=< Voice number 1>
{VOICE_INDEX}=< 1 | 2 >
{VOICENUMBER2}=< Voice number 2>
{VOICE_INDEX}=< 1 | 2 >
{MIMSI_SMS}=< 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 >
{MIMSI_VOBB}=< 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 >
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ROUTECATEGORY: IMSI="460000009123456", PROV=TRUE,
ROUTECATEGORY=4;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:The operation is successful.
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to query the enhanced routing service data of a subscriber.
Parameter Description:
Example:
LST ROUTECATEGORY: IMSI="460100008001001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{ROUTECATEGORY}=< 1 - 255 >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EXEXROUTECATEGORY: IMSI="460000009123456", PROV=TRUE,
EXEXROUTECATEGORY=4;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:The operation is successful.
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST EXEXROUTECATEGORY: IMSI="460100008001001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= < MSISDN number>
{ EXEXROUTECATEGORY }=< 1 ~ 2147483647 >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to modify the voice mail service for a multi-IMSI
subscriber.
Parameter Description:
Example:
MOD MIMSIVM: IMSI="460000009123456", PROV=TRUE,
VOICENUMBER="86123456", VOICE_INDEX=1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:The operation is successful.
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST MIMSIVM: IMSI="460100008001001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{VOICENUMBER1}=< Voice number 1>
{VOICE_INDEX}=< 1 | 2 >
{VOICENUMBER2}=< Voice number 2>
{VOICE_INDEX}=< 1 | 2 >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CR: IMSI="460100008001001", PROV=TRUE, CALLREDIRECT=23;
Output:
If the operation succeeds, the system displays one of the following messages:
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST CR: IMSI="460100008001001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number>
{CALLREDIRECT}=< 0 - 255 | "NOTPROV" >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD NRBT: IMSI="444441234567890",PROV=TRUE,NRBT=600;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command only applies to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, this command is used to withdraw the NRBT service.
If the parameter PROV is set to TRUE, this command is used to provide the NRBT service.
Example:
LST NRBT: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI Number >,
{ISDN}=< MSISDN Number >,
{NRBT}=<"PROV"|"NOTPROV">
{NRBTIndex}=< INAP INDEX for National Ring Back Tone service>
{ARBT}=<PROV|NOTPROV>
{ARBTIndex}=< INDEX for ARBT>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
This command is only applicable to the subscriber whose NAM is BOTH, MSC, or NONE.
Parameter Description:
Example:
MOD OPTGPRS: IMSI="123456789012345", PROV=ADDPDPCNTX, CNTXID=1,
APNTPLID=3, QOSTPLID=3, PDPTYPE=IPV4,ADDIND=STATIC,
PDPADD="10.64.12.11", VPLMN=TRUE, CHARGE=HOT", PROVAPNOI=TRUE,
APNOITPLID=1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter APN_TYPE is set to PS_APN or BOTH, the parameter QOSTPLID is
mandatory.
If the parameter APN_TYPE is set to EPS_APN or BOTH, the parameter EPS_QOSTPLID is
mandatory.
If the parameter ADDIND is set to STATIC and the parameter PDPTYPE is set to IPV4, one of the
parameters PDPADD or PDPADDV4 must be specified and their values must be an IPV4 address.
If the parameter ADDIND is set to STATIC and the parameter PDPTYPE is set to IPV6, the
parameter PDPADD must be specified and its value must be an IPv6 address. The parameter
PDPADDV4 does not need to be specified.
If the parameter ADDIND is set to STATIC and the parameter PDPTYPE is set to IPV4IPV6, the
parameter PDPADD must be specified and its value must be an IPv6 address.
If the parameter ADD2IND is set to STATIC and the parameter PDPTYPE is set to IPV4IPV6, the
parameter PDPADDIPv4 must be specified and its value must be an IPv4 address.
If the parameter ADDIND is set to STATIC and the parameter PDPTYPE is set to
IPv4_OR_IPv6, either or both of the parameters PDPADD and PDPADDV4 must be specified.
The value of PDPADD must be an IPv6 address and the value of PDPADDV4 must be an IPv4
address.
If the parameter ADDIND is set to STATIC and the parameter PDPTYPE is set to
IPV4_OR_IPV6, the parameter PDPADD must be specified and its value must be an IPv6 address.
If the parameter ADD2IND is set to STATIC and the parameter PDPTYPE is set to
IPV4_OR_IPV6, the parameter PDPADDIPv4 must be specified and its value must be an IPv4
address.
If the parameter ADDIND is set to DYNAMIC, the parameter PDPADD does not need to be
specified.
If the parameter ADD2IND is set to DYNAMIC, the parameter PDPADDV4 does not need to be
specified.
Only one of the CHARGE and STDCHARGE must be specified.
Only one of the CHARGE_GLOBAL and SCHARGE_GLOBAL must be specified.
If the parameter PROVAPNOI is set to TRUE, the parameter APNOITPLID must be specified.
The parameters APNTPLID and APN are mutually exclusive. Specify only one of them.
Example:
LST OPTGPRS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{MSISDN}=<MSISDN number>
{CHARGE_GLOBAL}=< NONE | HOT| FLAT | PREPAID | NORMAL| 3 | 5 | 6 | 7 | 9 | … |
254 >
{SCHARGE_GLOBAL}=<UE level charging characteristic,such as "007F">
{TPLID}=< 0-65534>
{CNTXID }=< 0-50>
{APN_TYPE}=< PS_APN | EPS_APN | BOTH >
{APNTPLID}=< 0-65534>
{DEFAULTCFGFLAG}=< TRUE|FALSE>
{QOSTPLID}=< 0-254>
{EPS_QOSTPLID}=< 0-65534>
{PDPTYPE}=< X25 | PPP | OCSIHOSS | IPV4 | IPV6 | IPV4IPV6 | IPV4_OR_IPV6 >
{ PDPADD }=< PDP Address1>
{PDPADDIPV4}=< PDP IPV4 Address>
{ VPLMN }=< TRUE|FALSE>
{CHARGE }=< NONE | HOT| FLAT | PREPAID | NORMAL | 3 | 5 | 6 | 7 | 9 | … | 254 >
{STDCHARGE }=<APN level charging characteristic,such as "008F">
{CNTXID }=< 0-50>
...........
"Binding OptGprsTpl Data"
{HLRSN}=< HLR Serial No in the redundant HLR center >
{TPLID}=< 0-65534>
{TPLNAME}=< OptGprs Template Name>
{CNTXID }=< 0-50>
{APNTYPE}=< PS_APN | EPS_APN| BOTH>
{APNTPLID}=< 0-65534>
{DEFAULTCFGFLAG}=< TRUE | FALSE>
{WILDCARDFLAG}=< TRUE | FALSE>
{QOSTPLID}=< 0-65534>
{EPSQOSTPLID}=< 0-65534>
{VPLMN }=< TRUE | FALSE>
{PDPTYPE}=< X25 | PPP | OCSIHOSS | IPV4 | IPV6 | IPV4IPV6 | IPV4_OR_IPV6 >
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TPLOPTGPRS: IMSI="460000009123456", PROV=TRUE, TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD MNUG: IMSI="460000009012345", PROV=TRUE, GTYPE=EIMSI,
SIMSI="460000000912345";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are the data of subscriber A. The two parameters are mutually
exclusive. Specify only one of them.
The parameters SIMSI and SISDN are the data of subscriber B. The two parameters are mutually
exclusive. Specify only one of them.
If PROV is set to TRUE, specify GTYPE and SIMSI (or SISDN). SIMSI and SISDN are mutually
exclusive. Specify only one of them. If PROV is set to FALSE, do not specify GTYPE.
If GTYPE is set to MISDN, specify TCR and ACTISDN.
Example:
LST MNUG: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=< IMSI number >
{LISDN}=< MSISDN number >
{GTYPE}=< EIMSI >
{ACTIVE}=< Active MSISDN number >
{SISDN}=< MSISDN number >
IMSI and ISDN are mutually exclusive. Specify only one of them.
The Member Number, TCR, and ID parameters are displayed in the command output only for
multi-MSISDN multi-profile subscribers.
Example:
MOD CCBS: IMSI="460000009123456", CCBS=TRUE, CCBSTARGET=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST CCBS: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= < MSISDN number>
{CCBS}=< PROV| NOTPROV >
{CCBSTARGET}=< PROV| NOTPROV >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
This command only applies to the subscriber whose NAM is BOTH, MSC, or NONE.
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CSISTATE: IMSI="4600000000000", CSITYPE=MCSI, CSISTATE=TRUE;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ACR: IMSI="444441234567890",PROV=TRUE;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST ACR: IMSI="444441234567890";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{STATUS}=<"PROV"|"NOTPROV"|"ACT">
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
ACT ACR: IMSI="444441234567890";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
DEA ACR: IMSI="444441234567890";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
ADD IMSIRTSUB: IMSI="123456", HLRSN="222";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
MOD IMSIRTSUB: IMSI="123456", HLRSN="222";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
LST IMSIRTSUB: IMSI="123456";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>,
{HLRSN}=< HLR Serial No in the redundant HLR center >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
RMV IMSIRTSUB: IMSI="123456";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
ADD NPOTHERRPT: ISDN="86131075003002", RN="1112";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameter MSCID is optional. If the target network use number portability (NP), the parameter
MSCID is mandatory.
Function: This command is used to delete the data of a subscriber who ports the number
between other networks.
Parameter Description:
Example:
RMV NPOTHERRPT: ISDN="86131075003002";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
MOD NPOTHERRPT: ISDN="86131075003003", RN="1113";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters RN and MSCID are optional. One of them must be specified.
Example:
{ ISDN }=< ISDN Number>,
{ RN }=< RN >,
{ MSCID }=< MSCID >
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
ADD NPDONORSUB: IMSI="4601075003001",ISDN="86131075003001", RN="1112";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
When you add a ported-out subscriber, specify the parameters of IMSI and ISDN. The parameter
ISDN is mandatory, and IMSI is optional.
Example:
MOD NPDONORSUB: IMSI="460000009012345", RN="1113";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
RMV NPDONORSUB: ISDN="86138075003001";
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST NPDONORSUB: IMSI="460000009012345";
Output
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ ISDN }=< ISDN Number>,
{ RN }=< RN >,
{ HLRNUM }=< HLRNUM >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are mutually exclusive. Specify only one of the them.
Example:
MOD SMSROUTE: IMSI="460000009123456", PROV=TRUE, TPLID=4;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST SMSROUTE: IMSI="460000009123456";
Output
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ ISDN }=< ISDN Number>,
{ TPLID }=< SMS-ROUTE template ID >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
ACT CFD: IMSI="460000009123456";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
DEA CFD: IMSI="460000009123456";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
SND UPL: ISDN="86131075003003";
Output:
If the operation succeeds, the following success code is displayed:
SUCCESS0001:Operation is successful
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
SUCCESS0001:Operation is successful
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
Example:
ACT ISDN: ISDN="13516888888";
Output:
If the operation succeeds, the following success code is displayed:
SUCCESS0001:Operation is successful
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
Example:
MOD NSMSIN: IMSI="460000009123456", SMSINPROV=TRUE,
SCPADD="8613911111", SKEY=1, DP=MO, TAMM=TRUE, ACT= TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST NSMSIN: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ SCPADD}=< SCPADD >,
{ SKEY}=< 0-2147483647>
{ DP}=< "MO"|"MT"|"SR">
{ TAMM}=< TRUE|FALSE >
{ STATUS }=< NOTPROV|PROV|ACT >
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
MOD COMISDN: IMSI="460000009123456", PROV=TRUE,
COMISDN="460000001111111", OVERIDE=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST COMISDN: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ COMISDN}=< COMISDN Number >,
{ OVERIDE}=< TRUE/FALSE >
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
LST OWNISDN: ISDN="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ MSISDN }=< MSISDN Number>,
{ OWNISDN }=< OWNISDN Number >,
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
MOD DEFAULTOFA: IMSI="460035589300001", DEFAULTOFA_ID=8;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST DEFAULTOFA: IMSI="460035589300001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ DEFAULTOFA_ID}=< 0-65534 >,
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
MOD CPP: IMSI="460035589300001", PROV=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST CPP: IMSI="460035589300001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ CPP}=< PROV|NOTPROV >,
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
Provide the NIR service for the subscriber whose IMSI is 460000009123456 with NIR
index set to 22.
MOD NIR: IMSI="460000009123456", PROV=TRUE, NIR=22;
Withdraw the NIR service from the subscriber whose IMSI is 460000009123456.
MOD NIR: IMSI="460000009123456", PROV=FALSE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
Query whether the NIR service is provided for the subscriber whose IMSI is
460000009123456.
LST NIR: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ ISDN }=< ISDN Number>,
{NIR}=< PROV|NOTPROV >
{NIRIndex}=<0-999>
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Function: Use this command to set or withdraw the ELCS service data for subscribers.
Parameter Description:
Example:
MOD ELCS: IMSI="460035589300001", PROV=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST ELCS: IMSI="460035589300001";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ ELCS}=< PROV>
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
Example:
MOD IMEIBIND: IMSI="123456789012345", OPTIONTYPE=PROVIDE,
IMEI="12345678901234";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
If this command is executed, the HLR will send a CancelLocation message to the VLR or SGSN.
In the M2M binding service, one IMSI can be bound with only one IMEI. Their binding relationship
applies to both the PS and CS domains.
The type of OPTIONTYPE is Enumeration:
PROVIDE: Provide the M2M binding service.
MODIFY: Modify the IMEI that has been bound with an IMSI.
WITHDRAW: Withdraw the IMEI binding service.
DELETEIMEI: Delete the IMEI that has been bound with an IMSI.
IMSI and ISDN are optional. Specify only one of the them.
Example:
LST IMEIBIND: IMSI="123456789123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{IMSIIMEIBIND}=<<NULL> | IMEI number >
If the operation fails, error codes will be returned. For details of the error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of them.
If this command is executed for a subscriber whose M2M binding service is automatic binding and
the subscriber's IMSI is not bound with an IMEI, the result of IMSIIMEIBIND is NULL.
Parameter Description:
Example:
MOD M2MNOTIFY: IMSI="123456789012345", PROV=TRUE;
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes.".
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
LST M2MNOTIFY: IMSI="123456789123456";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=< ISDN Number>,
{M2MNOTIFY}=<PROV|NOTPROV|LU>
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CA: IMSI="460000009012345", PROV=TRUE, CA1=1, CA2=2;
Output
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Charging area 1, Charging area 2, and Charging area 3 cannot be set to a same value.
Function: Use this command to query the charging area service data for subscribers.
Parameter Description:
Example:
LST CA: IMSI="460000009012345";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{CA1}= <1-9999>
{CA2}= <1-9999>
{CA3}= <1-9999>
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
This command is only applied to the subscriber whose NAM is BOTH or MSC.
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
LST FRAUD: IMSI="460035589300001";
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{TPLID}=< Template id>
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to modify the Calling Name Presentation (CNAP)
supplementary service data of a subscriber. It specifies whether to provide the CNAP service
for a subscriber.
Parameter Description:
Example:
MOD CNAP:IMSI="345126789012345",PROV=FALSE;
MOD CNAP:IMSI="345126789012345",PROV=TRUE,OVERRIDE=FALSE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
This command is only applied to the subscriber whose NAM is BOTH or MSC.
If the parameter PROV is set to FALSE, the parameter OVERRIDE need not be specified.
If the parameter PROV is set to TRUE, the parameter OVERRIDE is mandatory.
Example:
LST CNAP: IMSI="345126789012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= <MSISDN number>
{STATUS}= <PROV|NOTPROV>
{OVERRIDE}=<TRUE|FALSE>
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
Example:
MOD NONSUB: IMSI="460000009012345", NON3GPPSUPP=FALSE;
MOD NONSUB: IMSI="460000009012345", NON3GPPSUPP=TRUE,
NONARD=WLANNOTALLOWED-1, PROVMIP6=TRUE,
MIP6FEAVEC=MIP6_INTEGRATED;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
Before configuring the NON-3GPP subscriber attributes, ensure that the subscriber has registered the
EPS service.
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROVMIP6 is set to TRUE, the parameter MIP6FEAVEC is mandatory.
If the parameter PROVTIMEOUT is set to TRUE, the parameter SESSIONTIMEOUT is
mandatory.
Example:
LST NONSUB: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= <MSISDN number>
{NON3GPPSUPP}= <TRUE|FALSE>
{WLANNOTALLOWED}=<TRUE|FALSE>
{CDMA2000_1XNOTALLOWED}=<TRUE|FALSE>
{HRPDNOTALLOWED}=<TRUE|FALSE>
{UMBNOTALLOWED}=<TRUE|FALSE>
{EHRPDNOTALLOWED}=<TRUE|FALSE>
{MIP6FEAVEC}=<MIP6_INTEGRATED|PMIP6_SUPPORTED|IP4_HOA_SUPPORTED|
ASSIGN_LOCAL_IP | MIP4_SUPPORTED | GTPv2_SUPPORTED >
{SESSIONTIMEOUT}=<1-4294967295>
{ VOWIFI_TAG}=< Non_VoWIFI | VoWIFI >
Example:
ADD CKI: HLRSN=1, IMSI="460000009123456", MSISDN="86131234567",
KIVALUE="1234567890ABCDEF1111111111111111", K4SNO=2, CARDTYPE=SIM,
ALG=COMP128_1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The default value of the parameter K4SNO is 0, which indicates that no K4 value will be used to
decrypt KI.
The parameters ALG and CARDTYPE must be specified together. The value of the parameter
ALG depends on that of the parameter CARDTYPE. Please pay attention to that the MILEANGE
algorithm is also applicable to the SIM card.
If the parameter ALG is set to MILENAGE, MILENAGE_2 or CUSTOM_1, the parameters OPC
and OPSNO are conditional parameters; that is, one of the two parameters must be specified. If the
parameter ALG is not set to MILENAGE, MILENAGE_2 and CUSTOM_1, the parameter OPC
need not be specified. If the parameter OPSNO is set to 0, it indicates that no OP data is used.
The parameter HLRSN need not be specified or is set to the default value 255 if the current PGW is
a common version. The parameter HLRSN must be specified if the current PGW is a redundant
version. In this case, this parameter does not have a default value.
The parameter AMFSNO is a conditionl parameter when CARDTYPE is USIM or ALG is
MILENAGE, MILENAGE_2 or CUSTOM_1.
The difference between MILENAGE_2 and MILENAGE is that different algorithms are used for
converting XRES of authentication quintuplets into SRES of authentication triplets.
Parameter Description:
Example:
GET TERMSTATE: IMSI="460021001008001", OnHLR=TRUE, LOCATION=TRUE,
STATUS=TRUE, DetailFLAG=FALSE;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= <MSISDN number>
{OnHLR}= <0|1|2|3|4>
{LOCATION}=<UE's location>
{STATUS}=<0|1|3|4|5>
{LocationTime}=<Update Location Time>
{EPSLOCATION}=<UE's EPSlocation>
{CISDN}= <MSISDN number>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
RMV GPRS: IMSI=”123456789”;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001: Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ICSIND: IMSI="460000009012345", ICSIND=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST ICSIND: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= <MSISDN number>
{ICSIND}= < TRUE|FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
MOD ANCHOR: IMSI="460000009012345", ANCHOR=FALSE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST ANCHOR: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= <MSISDN number>
{ANCHOR}= < TRUE|FALSE|SELECTIVE|TCSI|PRE_FALSE|PRE_TRUE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
MOD IMOCSI:ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
MOD IMVTCSI:ISDN="987654321",PROV=TRUE,TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
MOD GROUPSIM: GIMSI="460000000000000", GISDN ="861300000000000",
PROV=ADD, HLRSN=1, MSIMTYPE=Sequential, MEMBERISDN1="861311111111111",
USERTYPE=254, TONETYPE=Basic_Tone, CFSUP=TRUE, STIME=254,
SMS="861322222222222";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the parameter PROV is set to ADD, the parameters GIMSI GISDN HLRSN MSIMTYPE are
mandatory.
If the parameter PROV is set to RMV or MOD, the GIMSI and GISDN parameters are optional.
Specify only one of them.
The value of the SMS, VOICE, MMS, or LCS cannot be the same as that of the GISDN parameter.
Example:
LST GROUPSIM: GIMSI="460000000000000";
Output:
If the operation succeeds, the system displays an output with the following format:
{GIMSI}= <Group's IMSI number>
{GISDN}=<Group's MSISDN number >
{MSIMTYPE}=< sequential | parallel | parallel preferred >
{ USERTYPE }=< User Type >
{TONETYPE}=< basic tone | intelligent tone>
{CFSUP}=<TRUE|FALSE>
{STIME}=< no answer time for sequential alerting >
{PTIME}=< no answer time for parallel alerting >
{SMS}=< Sms activation isdn >
{VOICE}=< Voice activation isdn >
{MMS}=< MMS activation isdn >
{LCS}=< LCS activation isdn >
{ SYNC }=< Allowed | Denied >
{MEMBERISDN}=<Member's MSISDN number >
{ORDER}=<0-8>
{MBRDC}=< Not_Denied | Denied >
{MBRSMS}=< Not_Denied | Denied >
...........
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The GIMSI and GISDN parameters are optional. Specify only one of them.
Example:
MOD GROUPUSER: GIMSI="460000000000000", PROV= MOD,
MEMBERISDN="861300000000000", ORDER=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The GIMSI and GISDN parameters are optional. Specify only one of them.
Example:
MOD EGR: IMSI="460030000000001", PROV=TRUE, EGRHLRSN=4;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST EGR: IMSI="460030000000003";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{EGR}=< PROV| NOT PROV>
{EGRHLRSN}=< HLR Serial No>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EPS: IMSI="460000009123456", PROV=TRUE, AMBRMAXUL=500000,
AMBRMAXDL=100000;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST EPS: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ EPS}=< PROV| NOT PROV>
{ AMBRMAXUL}=< UE level MAX Upload Bandwidth >
{ AMBRMAXDL}=< UE level MAX Download Bandwidth >
{ANCHOR}=< TRUE|FALSE|SELECTIVE|TCSI|PRE_FALSE|PRE_TRUE>
{VOLTETAG}=<TRUE|FALSE>
{ICSIND}=<TRUE|FALSE>
{MPS}=<TRUE|FALSE>
{TAUTIMER}={0-43200}
{LTEAUTOPROV}=<TRUE|FALSE|AUTOTPLUSER|AUTOUSER_NN|
AUTOTPLUSER_NN|AutoLteToVolte|AutoLteToVolte_NN>
{RELAY_NODE}=<TRUE|FALSE>
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD LUCSI: IMSI="460000009123456", PROV=TRUE, TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST LUCSI: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{TPLID}=< Template id>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
RMV CHANGEDISDN: ISDN="8613772897878";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
ISDN is mandatory.
Example:
MOD PLMNRSZI: IMSI="444441234567890", PROV = TRUE, PLMNTPLID =1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter PLMNTPLID must be specified.
Example:
LST PLMNRSZI: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{PLMNTPLID}=< PLMN TemplateID >
{SWXPLMNTPLID}=< PLMN-specific roaming restriction template ID for SWx interface >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD STNSR: IMSI="460000009123456", PROV =TRUE, STNSR =”4601389162252”;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
ISDNFILE:
- This parameter contains multiple inconsecutive MSISDNs. Each MSISDN occupies one line.
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
IMSISTNSRFILE:
- This parameter contains multiple inconsecutive IMSIs and corresponding STNSRs. Each IMSI
and STNSR occupy one line.
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
ISDNSTNSRFILE:
- This parameter contains multiple inconsecutive MSISDNs and corresponding STNSRs. Each
MSISDN and STNSR occupies one line.
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
PROV:
- If IMSI/STNSR file name or MSISDN/STNSR file name is specified, Whether to provide or
withdraw STN-SR must be set to TRUE.
- If Number of subscribers, Name of IMSI file, or Name of MSISDN file is specified, Whether
to provide or withdraw STN-SR must be set to FALSE.
STNSR:
- This parameter can be configured when Whether to provide or withdraw STN-SR is set to
TRUE.
- This parameter cannot be specified when IMSI/STNSR file name or MSISDN/STNSR file
name is specified.
- This parameter is mandatory when neither IMSI/STNSR file name nor MSISDN/STNSR file
name is specified.
Example:
The parameters IMSI, MSISDN, Name of IMSI file, Name of MSISDN file, IMSI/STNSR file
name, and MSISDN/STNSR file name are optional. Specify only one of them.
If Number of subscribers is specified, IMSI or MSISDN must be specified, but Name of IMSI file or
Name of MSISDN file cannot be specified.
RECORDCOUNT does not need to be specified if the number of subscribers is 1.
IMSIFILE:
- This parameter contains multiple inconsecutive IMSIs. Each IMSI occupies one line.
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
ISDNFILE:
- This parameter contains multiple inconsecutive MSISDNs. Each MSISDN occupies one line.
- The file name extension is .txt. The file is uploaded to the specified location on the FTP server
using the File Manager provided by the PGW Web LMT.
Example:
MOD EPSAPNOI: IMSI="460000009123456", PROV =TRUE, APNOI =”huawei.com”;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter APNOI should be present.
Example:
LST EPSAPNOI: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{ APNOI }= <UE Level APN Operator Identifier Replacement >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EPSAMBR: IMSI="460000009123456", AMBRMAXUL =10000, AMBRMAXDL
=10000;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST EPSAMBR: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{ AMBRMAXUL }= < UE Level Max Request Bandwidth of Upload >
{ AMBRMAXDL }= < UE Level Max Request Bandwidth of Download >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD RFPRID: IMSI="460000009123456", RATFREQSELPRIID =10;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST RFPRID: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{ RATFREQSELPRIID}= < RAT Frequency Selection Priority ID >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD DIAMRRS: IMSI="460000009123456", PROV=TRUE, DIAMNODETPL_ID=20;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
If the parameter PROV is set to TRUE, the parameter DIAMNODETPL_ID must be specified.
Example:
LST DIAMRRS: IMSI="444441234567890";
Output:
If the operation succeeds, the system displays an output with the following format:
{ DIAMNODETPLID }=< Diameter Roaming TemplateID >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD USERCATEGORY: IMSI="984519856312345",USERCATEGORY=M2M;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST USERCATEGORY: IMSI="984519856312345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{MSISDN}=<MSISDN Number>
{CATEGORY}=<NORMAL|M2M>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD MSIM: IMSI="460000009123456", PROV=TRUE, MSIMTYPE=ActiveByUSSD;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST MSIM: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= < MSISDN number>
{MSIMTYPE}=< ActiveByUPL| ActiveByUSSD>
{MTISDN}=< Active MSISDN number >
{ISDN2} = < MSISDN Number 2>
{ISDN3} = < MSISDN Number 3>
{ISDN4} = < MSISDN Number 4>
{ISDN5} = < MSISDN Number 5>
{ISDN6} = < MSISDN Number 6>
{ISDN7} = < MSISDN Number 7>
{ISDN8} = < MSISDN Number 8>
{ISDN9} = < MSISDN Number 9>
Member Number ACTIVE ORDERID
{ IMSI number} + { NO | YES } + {1-9}
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
The IMSI , ISDN, MSIMTYPE, Member Number, ACTIVE, and ORDERID parameters are
displayed in the command output for enhanced multi-SIM subscribers.
The IMSI , ISDN, MSIMTYPE, MTISDN, and ISDN2-9 parameters are displayed in the
command output for multi-SIM subscribers.
CAMEL.
AllowMTCall: The
HSS9860 delivers voice
service data.
ReturnBAIC: The
HSS9860 delivers BAIC
data for all basic services.
GMSC_NOTS Enumerated ReturnLP-CSI Specifies how the HSS9860 C
UPPHASE2 AllowMTCall responds to the requests for
providing CAMEL services
ReturnBAIC for called subscribers if the
GMSC does not support
CAMEL phase 2.
ReturnLP-CSI: The
HSS9860 compares the
CAMEL phase supported
by the GMSC with the
CAMEL phase configured
in this template and
delivers the CSI data
carrying a lower CAMEL
phase.
AllowMTCall: The
HSS9860 delivers voice
service data.
ReturnBAIC: The
HSS9860 delivers BAIC
data for all basic services.
GMSC_NOTS Enumerated ReturnLP-CSI Specifies how the HSS9860 C
UPPHASE3 AllowMTCall responds to the requests for
providing CAMEL services
ReturnBAIC for called subscribers if the
GMSC does not support
CAMEL phase 3.
ReturnLP-CSI: The
HSS9860 compares the
CAMEL phase supported
by the GMSC with the
CAMEL phase configured
in this template and
delivers the CSI data
carrying a lower CAMEL
phase.
AllowMTCall: The
HSS9860 delivers voice
service data.
ReturnBAIC: The
HSS9860 delivers BAIC
subscriber is roaming
outside the HPLMN, the
HSS9860 delivers the T-
CSI.
INTERNATIONAL: When
the subscriber is roaming
outside the home country,
the HSS9860 delivers the
T-CSI.
HPLMNC: When the
subscriber is roaming
within the home country,
the HSS9860 delivers the
T-CSI.
ALL_PLMN: Wherever the
subscriber is roaming, the
HSS9860 delivers the T-
CSI.
Example:
MOD NTCSI: IMSI="460000009123456", CAMELTYPE=OCSI, PROV=ADD,
CAMEL=PHASE1, OCSIDP=COLLECTINFO, SK=1, GSMSCFADD="158600000",
DEFCALL=continueCall, VLR_NOTSUPPHASE1=AllowLocationUpdateWithMOCall,
VLR_NOTSUPPHASE2=ReturnLPO-CSI, VLR_NOTSUPPHASE3=ReturnLPO-CSI,
VLR_NOTSUPPHASE4=ReturnLPO-CSI, GMSC_NOTSUPPHASE1=AllowMTCall,
GMSC_NOTSUPPHASE2=ReturnLP-CSI, GMSC_NOTSUPPHASE3=ReturnLP-CSI,
GMSC_NOTSUPPHASE4=ReturnLP-CSI;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST NTCSI: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}= < MSISDN number>
OCSI DATA
{CAMEL}=<PHASE1| PHASE2| PHASE3| PHASE4>
{OCSIDP}=<COLLECTINFO| ROUTESELFAIL>
{SK} = <0-2147483647>
{GSMSCFADD} = <gsmSCF address>
{DEFAULTCALL} = <continueCall | releaseCall>
{VLR_NOTSUPPHASE1} = AllowLocationUpdateWithMOCall|
AllowLocationUpdateWithODBBAOC| DenyLocationUpdate>
{VLR_NOTSUPPHASE2} = <ReturnLPO-CSI | AllowLocationUpdateWithODBBAOC |
DenyLocationUpdate>
{VLR_NOTSUPPHASE3} = <ReturnLPO-CSI | AllowLocationUpdateWithODBBAOC |
DenyLocationUpdate>
{VLR_NOTSUPPHASE4} = <ReturnLPO-CSI | AllowLocationUpdateWithODBBAOC |
DenyLocationUpdate>
{GMSC_NOTSUPPHASE1} = <AllowMTCall | ReturnBAIC>
{GMSC_NOTSUPPHASE2}=<ReturnLP-CSI | AllowMTCall | ReturnBAIC>
{GMSC_NOTSUPPHASE3}=<ReturnLP-CSI | AllowMTCall | ReturnBAIC>
{GMSC_NOTSUPPHASE4}=<ReturnLP-CSI | AllowMTCall | ReturnBAIC>
TCSI DATA
{CAMEL}=<PHASE1| PHASE2| PHASE3| PHASE4>
{TCSIDP}=< TAA| TBUSY| TNOANSWER>
{SK} = <0-2147483647>
{GSMSCFADD} = <gsmSCF address>
{DEFAULTCALL} = <continueCall | releaseCall>
OCSI DATA
CAMEL = PHASE3
OCSIDP = COLLECTINFO
SK = 1
GSMSCFADD = 11234
DEFAULTCALL = continueCall
VLR_NOTSUPPHASE1 = AllowLocationUpdateWithODBBAOC
VLR_NOTSUPPHASE2 = AllowLocationUpdateWithODBBAOC
VLR_NOTSUPPHASE3 = AllowLocationUpdateWithODBBAOC
VLR_NOTSUPPHASE4 = AllowLocationUpdateWithODBBAOC
GMSC_NOTSUPPHASE1 = ReturnBAIC
GMSC_NOTSUPPHASE2 = AllowMTCall
GMSC_NOTSUPPHASE3 = ReturnBAIC
GMSC_NOTSUPPHASE4 = ReturnLPT-CSI
TCSI DATA
CAMEL = PHASE3
TCSIDP = TAA
SK = 1
GSMSCFADD = 11234
DEFAULTCALL = continueCall
GMSC_NOTSUPPHASE1 = ReturnBAIC
GMSC_NOTSUPPHASE2 = ReturnLPT-CSI
GMSC_NOTSUPPHASE3 = ReturnLPT-CSI
GMSC_NOTSUPPHASE4 = AllowMTCall
PSICONF = TRUE
AVAILABLE_PLMN = HPLMN
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD PREMSMS: IMSI="460000009123456", ODBPREMSMS=TRUE,
ODBADULTSMS=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are optional. Specify only one of the them.
Example:
LST PREMSMS: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ ODBPREMSMS}=< TRUE| FALSE>
{ ODBADULTSMS}=< TRUE | FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ZCLOCK: IMSI="460000009123456", ZCLOCKPROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parametes IMSI and ISDN are optional. Specify only one of the them.
Example:
LST ZCLOCK: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ZCLOCKPROV}=< TRUE| FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST DYNZC: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ ZC1}=< Zone Code>
{ ZC2}=< Zone Code>
{ ZC3}=< Zone Code>
{ ZC4}=< Zone Code>
{ ZC5}=< Zone Code>
{ ZC6}=< Zone Code>
{ ZC7}=< Zone Code>
{ ZC8}=< Zone Code>
{ ZC9}=< Zone Code>
{ ZC10}=< Zone Code>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Parameter Description:
Example:
RESET BINDEDTAI: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD ALSSUPP: IMSI="460030000000001", PROV=TRUE, ALS_SUPP_TYPE=AOCC;
Output:
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD
ALSODB:IMSI="460000009123456",PROV=TRUE,ALS_ODB_TYPE="ODB-PB1";
Output:
If the operation succeeds, the system displays the following message:
RETCODE = 0 SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD PSSER: IMSI="460000009012345", PROV=ADDPDPCNTX, CNTXID=2,
PSAPNQOSTPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
subscribes.
CNTXID Numeral 1-50 PDP context ID O
EPSAPNQOSTPL Numeral 0-65534 EPSAPNQOS template ID O
ID
IPV4ADDIND Enumerated STATIC PDP IPV4 address indicator O
DYNAMIC
IPV4ADD Character string 0-39 PDP IPV4 address O
OTHERADDIND Enumerated STATIC PDP other address indicator O
DYNAMIC
OTHERADD Character string 0-39 PDP other address O
APNOI Character string 1-63 UE Level APN-O-I O
replacement
AMBRMAXUL Numeral 1-4294967295 UE level MAX upload O
bandwidth
AMBRMAXDL Numeral 1-4294967295 UE level MAX download O
bandwidth
RATFREQSELPR Numeral 0-256 RAT frequency selection O
IID priority ID
DEFAULTCNTXI Numeral 1-50 Default PDN context ID O
D
Example:
MOD EPSSER: IMSI="460000009123456", PROV=ADDPDNCNTX, CNTXID=2,
EPSAPNQOSTPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
LST PSSER: IMSI="460000009123456", DETAIL=FALSE;
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ CNTXID}=< CNTXID >
{ APNQOSTPLID }=< APNQOSTPLID >
{ OTHERADDIND }=< OTHERADDIND >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
LST EPSSER: IMSI="460000009123456", DETAIL=FALSE;
Output
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ CNTXID}=< CNTXID >
{ APNQOSTPLID }=< APNQOSTPLID >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
MOD TPLPSSER: IMSI="460000009123456", TPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
MOD TPLEPSSER: IMSI="460000009123456", RECORDCOUNT=4, TPLID=3;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI, MSISDN, Name of IMSI file, Name of MSISDN file are optional. Specify only one of
them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
This command can only be used by subscribers who modify the information of EPS.
access PS networks.
CATEGORY Enumerated UNKNOWN Subscriber category O
FRENCH
ENGLISH
GERMAN
RUSSIAN
SPANISH
SPECIAL
RESERVE
COMMON
SUPERIOR
DATACALL
TESTCALL
SPARE
PAYPHONE
16
…
31
COIN
33
…
254
MNP
DEFAULTCALL Enumerated See "TSCODE and Specifies the default call type O
DSCODE for the incoming call without
Enumeration" carrying the call type parameter.
TS Character string 40 Specifies the telephony service O
code.
BS Character string 160 Specifies the bearer service O
code.
CFU Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the Call Forwarding
Unconditional (CFU) service.
TRUE: The HSS9860
provides the CFU service.
FALSE: The HSS9860 does
not provide the CFU service.
CFUOFAID Numeral 0-65534 OFA template ID O
255 is an invalid
value.
of CFNRy.
FALSE: The HSS9860 does
not notify the calling party
in the case of CFNRy.
CFNRYCOU Enumerated OPERATOR Specifies the party that controls O
SUBSCRIBER the CFNRy service.
OPERATOR: The carrier
controls the registration,
activation, deregistration,
and deactivation of the
CFNRy service through the
Web UI.
SUBSCRIBER: Both the
carrier and the subscriber
can control the registration,
activation, deregistration,
and deactivation of the
CFNRy service. The
subscriber can control the
CFNRy service through the
MS.
CFNRC Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the Call Forwarding on
Mobile Subscriber Not
Reachable (CFNRc) service.
TRUE: The HSS9860
provides the CFNRc service.
FALSE: The HSS9860 does
not provide the CFNRc
service.
CFNRCOFAID Numeral 0-65534 OFA template ID O
255 is an invalid
value.
CFNRCNCS Boolean TRUE Specifies whether the HSS9860 O
FALSE notifies the calling party in the
case of CFNRc.
TRUE: The HSS9860 notifies
the calling party in the case
of CFNRc.
FALSE: The HSS9860 does
not notify the calling party
in the case of CFNRc.
CFNRCOU Enumerated OPERATOR Specifies the party that controls O
SUBSCRIBER the CFNRc service.
OPERATOR: The carrier
controls the registration,
activation, deregistration,
and deactivation of the
CFNRc service through the
Web UI.
SUBSCRIBER: Both the
carrier and the subscriber
can control the registration,
activation, deregistration,
and deactivation of the
CFNRc service. The
subscriber can control the
CFNRc service through the
MS.
CFD Boolean TRUE Specifies whether to provide the O
FALSE Call Forwarding-Default (CFD)
service.
TRUE: The HSS9860
provides the CFD service.
FALSE: The HSS9860 does
not provide the CFD service.
VALIDCCF Enumerated CFB Specifies the conditional CF O
CFNRy services such as CFB, CFNRy,
and CFNRc that can be replaced
CFNRc by the CFD.
SUPINTERCFD Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the CFD service to a
subscriber who is in the
international roaming.
TRUE: The HSS9860
provides the CFD service.
FALSE: The HSS9860 does
not provide the CFD service.
CFDNFS Boolean TRUE Specifies whether the HSS9860 O
FALSE notifies the forwarded-to party
in the case of CFD.
TRUE: The HSS9860 notifies
the forwarded-to party in the
case of CFD.
FALSE: The HSS9860 does
not notify the forwarded-to
party in the case of CFD.
CFDNCS Boolean TRUE Specifies whether the HSS9860 O
FALSE notifies the calling party in the
case of CFD.
TRUE: The HSS9860 notifies
the calling party in the case
of CFD.
FALSE: The HSS9860 does
not notify the calling party
in the case of CFD.
CFDFTN Character string 1-16 Forward to number O
CFDBSG Enumerated See "CFBSG Basic service group O
Enumeration"
CFDNRTIME Numeral 5-60 seconds in steps Specifies the no-reply time for O
of 5 seconds triggering the CFD.
SUPSHORTNUM Boolean TRUE Specifies whether the O
FALSE forwarded-to number registered
for the CFD service is a short
number.
TRUE: The forwarded-to
number registered for the
CFD service is a short
number.
FALSE: The forwarded-to
number registered for the
CFD service is not a short
number.
ACTCFD Boolean TRUE Activate CFD O
FALSE
CB Enumerated BAOC Specifies the type of the Call O
BOIC Barring (CB) services.
BOICEXHC
BAOC: Barring of All
Outgoing Calls
BAIC
BOIC: Barring of Outgoing
BICROAM, International Calls
BORO BOICEXHC: Barring of
Outgoing International Calls
except those directed to the
Home PLMN Country
BAIC: Barring of All
Incoming Calls
BICROAM: Barring of
Incoming Calls When
Roaming Outside Home
PLMN Country
BORO: Barring of Outgoing
Calls When Roaming
Outside Home PLMN
Country
CBCOU Enumerated OPERATOR Specifies the party that controls O
country.
BROHPLMNCGPRS: The
HSS9860 bars GPRS when
the subscriber roams outside
the home PLMN country.
ODBENTE Boolean TRUE Specifies whether the HSS9860 O
FALSE provides barring of outgoing
premium rate calls
(entertainment).
TRUE: The HSS9860
provides barring of outgoing
premium rate calls
(entertainment).
FALSE: The HSS9860 does
not provide barring of
outgoing premium rate calls
(entertainment).
ODBINFO Boolean TRUE Specifies whether the HSS9860 O
FALSE provides barring of outgoing
premium rate calls
(information).
TRUE: The HSS9860
provides barring of outgoing
premium rate calls
(information).
FALSE: The HSS9860 does
not provide barring of
outgoing premium rate calls
(information).
ODBRCF Enumerated NOBRCF Specifies the type of the ODB O
BRACF registration of call forwarding
(CF).
BRICFEXHC
NOBRCF: The HSS9860
BRICF does not bar the registration
of call forwarding.
BRACF: The HSS9860 bars
the registration of all the call
forwarding services.
BRICFEXHC: The HSS9860
bars the registration of any
international call forwarding
except that directed to the
home PLMN country.
BRICF: The HSS9860 bars
the registration of
international call
forwarding.
PLMN-specific barring.
ODBPB1: ODB PLMN-
specific barring type 1
(barring of outgoing long
distance calls)
ODBPB2: ODB PLMN-
specific barring type 2
ODBPB3: ODB PLMN-
specific barring type 3
ODBPB4: ODB PLMN-
specific barring type 4
ODBPOS Enumerated See "ODBPOS Specifies the type of the ODB O
Enumeration" packet services.
NOBPOS: The HSS9860
does not bar the packet
services.
BAPOS: The HSS9860 bars
all the packet services.
BHPLMNAPROAM: The
HSS9860 bars the packet
services from the access
points that are within the
home PLMN when the
subscriber is roaming in the
VPLMN.
BALLAPROAM: The
HSS9860 bars the packet
services from the access
points that are within the
VPLMN in which the
subscriber is roaming.
ODBPOSTYPE Enumerated See "ODBPOSTYPE Specifies the valid ODB PDP O
Enumeration" context activation.
BOTH: MS-originated and
network-originated PDP
context activations are valid.
MSInit: Only MS-originated
PDP context activations are
valid.
NetworkInit: Only network-
originated PDP context
activations are valid.
OCSI Numeral 0-65534 O-CSI template ID O
TCSI Numeral 0-65534 T-CSI template ID O
SMSCSI Numeral 0-65534 MO-SMS-CSI template ID O
5
6
7
9
10
11
12
13
14
15
16-254
SCHARGE_GLO Character string 0000-FFFF Standard global charging O
BAL characteristics
DICLENGTH Enumerated DICR_0-0 Length of DIC O
DICR_1-1
DICR_2-2
DICR_3-3
DICR_4-4
DICR_5-5
DICR_6-6
DICR_7-7
DICR_8-8
DICR_9-9
DICR_10-10
DICR_11-11
DICR_12-12
DICR_13-13
DICR_14-14
DICR_15-15
DICR_16-16
DICV-127
ROUTECATEGO Numeral 1-255 Routing category O
RY
CALLREDIRECT Numeral 0-255 Call redirection category O
NRBT Numeral 1-65535 NRBT index O
OSK Numeral 1-999 EOCSI service key O
TSK Numeral 1-999 ETCSI service key O
EXEXROUTECA Numeral 1-2147483647 Expand routing category O
TEGORY
MERBT Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the MERBT service.
TRUE: The HSS9860
provides the MERBT
service.
FALSE: The HSS9860 does
not provide the MERBT
service.
NIRPROV Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the NIR service.
TRUE: The HSS9860
provides the NIR service.
FALSE: The HSS9860 does
not provide the NIR service.
NIRINDEX Numeral 0-999 NIR index O
RZONE Numeral 0-9 RZONE index O
CCBS Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the Completion of
Calls to Busy Subscriber
(CCBS) service.
TRUE: The HSS9860
provides the CCBS service.
FALSE: The HSS9860 does
not provide the CCBS
service.
CCBSTARGET Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the CCBS target
service.
TRUE: The HSS9860
provides the CCBS target
service.
FALSE: The HSS9860 does
not provide the CCBS target
service.
ACR_STATUS Boolean TRUE Specifies whether the HSS9860 O
FALSE provides the ACR service.
TRUE: The HSS9860
provides the ACR service.
FALSE: The HSS9860 does
not provide the ACR
service.
SMSROUTETPL Numeral 0-65534 SMS-ROUTE template ID O
Example:
ADD CSPSSUB: HLRSN=1, IMSI="460000009123456", ISDN="460000009012389",
NAM=BOTH, DEFAULTCALL=TS11, CHARGE_GLOBAL=5;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI/MSISDN and Name of IMSI/MSISDN file are optional. Specify either IMSI/MSISDN or
Name of IMSI/MSISDN file.
Number of subscribers can be only specified together with IMSI/MSISDN to add the subscribers
with consecutive numbers in batches.
Name of IMSI/MSISDN file specifies the batch operation file that contains inconsecutive IMSIs
and their associated MSISDNs. The file is used for adding a batch of subscribers.
If Provide CFU is set to TRUE, CFU notification to calling party and CFU control party are
mandatory, and CFU OFA template ID is optional.
If Provide CFB is set to TRUE, CFB notification to calling party, CFB notification to
forwarded-to party, and CFB control party are mandatory, and CFB OFA template ID is
optional.
If Provide CFNRy is set to TRUE, CFNRy notification to calling party, CFNRy notification to
forwarded-to party, and CFNRy control party are mandatory, and CFNRy OFA template ID is
optional.
If Provide CFNRc is set to TRUE, CFNRc notification to calling party and CFNRc control
party are mandatory, and CFNRc OFA template ID is optional.
If Provide CFD is set to TRUE, CFD notification to forwarded-to party, CFD notification to
calling party, and CFD forwarded-to number are mandatory, and CFD basic service group and
CFD no reply time are optional.
If Provide CLIP is set to TRUE, CLIP override enable is mandatory.
If Provide CLIR is set to TRUE, CLIR mode is mandatory.
If Provide COLP is set to TRUE, COLP override enable is mandatory.
If Provide CNAP is set to TRUE, CNAP override enable is mandatory.
If Provide IST is set to TRUE, IST scheduled period and IST Output process are mandatory.
Before providing the MPTY service for a subscriber, you must provide the HOLD service for the
subscriber.
If you specify Global charging characteristic or Standard Global charging characteristic, you
cannot specify GPRS template ID.
When providing the GPRS service for subscribers using Optimized GPRS template ID, you must set
GPRS management mode in the SET MAPSERV command to SuppGprsManageOptimizeon.
To provide any of the BAOC, BOIC, BOICEXHC, BAIC, and BICROAM services, you must
specify CB control party.
Before adding a subscriber, run the ADD KI command to load KI for the subscriber.
When the PGW is configured with only one virtual HLR, the HLR serial number parameter is not
required. When the PGW is configured with multiple virtual HLRs, you must specify this parameter.
The subscribed services affect the performance and free size of the HLR database. It is suggested not
to provide the services that are not required.
To provide the ODB-POS service, you must specify both ODB of packet oriented service and
ODB of packet oriented service type.
Before providing the ACR service for a subscriber, ensure that the subscriber has been provided with
the CLIP service.
If Provide NIR is set to TRUE, NIR index is mandatory.
If Enhanced category extension is set to a valid value, Enhanced category is mandatory.
If ODBROAM is set to BROHPLMN, BROHPLMNC, or BROHPLMNCGPRS, the HSS9860
checks the network type based on the host name or realm name and the value of Whether to deliver
ODB for roaming in EPS by LST MAPCONF to determine whether to deliver ODB data for
subscribers roaming in EPS networks. The value of Whether to deliver ODB for roaming in EPS
is set by SET MAPCONF.
The parameter DND can be specified only when NAM is set to MSC or BOTH.
Example:
MOD TPLEPS: IMSI="460000009123456", EPSUSERTPLID=2;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI, ISDN, IMSIFILE and ISDNFILE are optional. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
RMV CSPSSUB: ISDN="13310911001";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, or Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
To run RMV CSPSSUB to delete a CS or PS subscriber, the CS or PS subscriber must have not
subscribed to the EPS services.
Example:
LST CCGLOBAL: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{ CHARGE_GLOBAL }=< CHARGE_GLOBAL >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI, ISDN, IMSIFILE, and ISDNFILE are optional. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
MOD CCGLOBAL: IMSI="460000009123456", CHARGE_GLOBAL=NORMAL;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMSI, ISDN, IMSIFILE and ISDNFILE are optional. Specify only one of them.
Do not specify Number of subscribers together with Name of IMSI file or Name of MSISDN file.
Example:
ADD TPLCSPSSUB: HLRSN=123, IMSI="460000009012345", ISDN="460000009056789",
CSPSTPLID=124;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Function: This command is used to add a subscriber to the HSS database so that they can use
services on GSM, UMTS, EPS, and IMS networks.
Parameter Description:
Example:
ADD TPLUSCSUB: HLRSN=1, IMSI="460000009123456", ISDN="8613484929766",
TPLID=2, SUBID="subinfo", IMPI="impiinfo",
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"", IRSID=1,
ALIASID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Parameter Description:
Example:
RMV USCSUB: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD CAPL: IMSI="460000009123456", CAPLPROV=TRUE, CAPL=2;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST CAPL: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= < IMSI Number >
{ISDN}=< MSISDN Number >
CAPL = <VALUE >
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EMMIN: IMSI="1234567", PROV=ADD, DP=12, SCPADDR="1111", SK=12;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, and Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
Example:
LST EMMIN: IMSI="1234567";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= < IMSI Number >
{ISDN}=< MSISDN Number >
{CAPL} = <1-15 >
{DP} = <0-255>
{SK} = <0-2147483647>
{SCPADDR} = <SCP Address>
{ACTIVE} = < TRUE| FALSE>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, and Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
Example:
MOD IMSIISDN: IMSI="2013521", ISDN="2014521", PROV=TRUE;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
LST IMSIISDN: IMSI="45000000";
Output:
If the operation succeeds, the system displays an output with the following format:
RETCODE = 0 SUCCESS0001: Operation is successfuL
IMSI = 45000000
ISDN = 2014521
"Auxilary IMSI" "Band MSISDN"
45000001 2013522
45000002 2013523
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, or Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
Example:
MOD VOLTETAG: IMSI="46000000012345", VOLTETAG=FALSE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, or Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
RECORDCOUNT specifies the number of subscribers to be provided with the VoLTE flag at a
time.The parameter value is the total number of consecutive subscriber numbers starting from the
specified IMSI or MSISDN.Specify this parameter only when you want to configure the VoLTE
subscriber flag for multiple subscribers with consecutive IMSIs or MSISDNs.
IMSIFILE specifies the name of an IMSI file to be used to configure the VoLTE subscriber flag for
multiple subscribers with non-consecutive IMSIs.An IMSI file contains multiple non-consecutive
IMSIs. It is in ANSI format, for example, lstisdn.txt. You can use the file manager function of the
PGW Web LMT to upload an IMSI file to a specified directory. For details about the file content, see
IMSI file content.
ISDNFILE specifies the name of an MSISDN file to be used to configure the VoLTE subscriber flag
for multiple subscribers with non-consecutive MSISDNs.An MSISDN file contains multiple non-
consecutive MSISDNs. It is in ANSI format, for example, lstisdn.txt. You can use the file manager
function of the PGW Web LMT to upload an MSISDN file to a specified directory. For details about
the MSISDN file content, see MSISDN file content.
Example:
LST VOLTETAG: IMSI="46000000012345";
Output:
If the operation succeeds, the system displays an output with the following format:
Specify one of the following parameters: IMSI, MSISDN, Name of IMSI file, or Name of
MSISDN file.
If you specify Number of subscribers, do not specify Name of IMSI file or Name of MSISDN
file. Similarly, if you specify Name of IMSI file or Name of MSISDN file, do not specify Number
of subscribers.
Example:
MOD PSAPNOI: IMSI="460000009123456", PROV =TRUE, PSAPNOITPLID = 1;
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
Example:
LST PSAPNOI: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}= <IMSI number>
{ISDN}=<MSISDN number>
{PSAPNOITPLID}=< 0-65534>
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
9.349 Add a KI
Command Name: ADD HKI
Function: This command is used to add a KI data record to the HSS service database. The KI
is a parameter used for AKA authentication.
Parameter Description:
Example:
ADD HKI: IMPI="impiinfo", K="1234567890abcdef1234567890ABCDEF", K4SNO=1,
OPSNO=1, AMFSNO=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Ki and OPC are important parameters used for authentication. You are advised to encrypt the KI and
OPC. If the KI and OPC have been encrypted, run ADD HKI and specify the encryption parameters.
If you enter the command in the command input pane and then specify the related parameters, the KI
value and OPC value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the KI
value and OPC value are displayed in plain text.
9.350 Remove a KI
Command Name: RMV HKI
Function: This command is used to remove a KI data record from the HSS service database.
Parameter Description:
Example:
RMV HKI: IMPI="impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
9.351 Modify a KI
Command Name: MOD HKI
Function: This command is used to modify the KI value of the specified KI data record in the
HSS service database. The IMPI is the key parameter used to determine the KI data record to
be modified.
Parameter Description:
Example:
MOD HKI: IMPI="impiinfo", K="abcdef1234567890ABCDEF1234567890", K4SNO=1,
OPSNO=0, AMFSNO=1, OPC="ABCDef1234567890ABCDef1234567890",
OPCK4SNO=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Parameters K, K4SNO, OPSNO, and AMFSNO are optional, and you must specify one of them at
least.
If you enter the command in the command input pane and then specify the related parameters, the KI
value and OPC value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the KI
value and OPC value are displayed in plain text.
Example:
LST HKI: IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
K: KI Value
K4SNO: K4 Serial Number
AMFSNO: AMF Serial Number
OPSNO: The Serial Number of OP for MEILEANGE Algorithm
OPCK4SNO: OPC K4 Serial Number
OPC: OPC value if it is applicable
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
CHK HKI: IMPI="impiinfo", K="1234567890abcdef1234567890ABCDEF";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the KI
value is displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the KI
value is displayed in plain text.
Example:
CHK HOPC: IMPI="impiinfo", OPC="1234567890abcdef1234567890abcdef";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the
OPC K4 value and OPC value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
OPC K4 value and OPC value are displayed in plain text.
Example:
1. ADD HHDAINF: IMPI="impiinfo", HUSERNAME="impiinfo", PWD="pwd";
2. ADD HHDAINF: IMPI="impiinfo", HA1="11112222333344445555666677778888";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The number of IMPIs that are authenticated by the HSS using the HTTP Digest authentication
scheme is specified by the license control item Number of IMPIs adopting the HDA authentication.
Only one HTTP digest authentication data record is allowed for an IMPI.
Do not specify User name and password together withHA1 value for an IMPI.
If you enter the command in the command input pane and then specify the related parameters, the
Password and HA1 value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
Password and HA1 value are displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
Example:
RMV HHDAINF: IMPI="impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the specified IMPI supports only HTTP Digest authentication and the IMPI is not used, this
command removes the IMPI.
If the specified IMPI supports other authentication mechanism in addition to HTTP Digest
authentication, this command removes only the HTTP Digest authentication information of the
IMPI.
Example:
1. MOD HHDAINF: IMPI="impiinfo", HUSERNAME="impiinfo", PWD="pwd";
2. MOD HHDAINF: IMPI="impiinfo", HA1="11112222333344445555666677778888";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
LST HHDAINF: IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
IMPI: IMPI Number
HUSERNAME: User Name
PWD: Password
HA1: HA1 Value
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
CHK HHDAPWD: HUSERNAME="impiinfo", PWD="pwd";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the
Password is displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
Password is displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`~!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
Parameter Description:
Example:
1. ADD HSDAINF: IMPI="impiinfo", HUSERNAME="impiinfo", PWD="pwd",
REALM="huawei.com";
2. ADD HSDAINF: IMPI="IMPIINFOMATION", REALM="huawei.com",
HA1="11112222333344445555666677778888";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
For an IMPI, either only HA1 value or both User name and Password must be specified.
Each IMPI can be configured with only one SIP Digest authentication data record.
The number of IMPIs that are authenticated by the HSS using the SIP Digest authentication scheme
is specified by the license control item Number of HDA IMPIs.
If you enter the command in the command input pane and then specify the related parameters, the
Password and HA1 value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane,
the Password and HA1 value are displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
REALM can be set to a string of 32 to 46 characters only when the domain name suffix is .
3gppnetwork.org. If the domain name suffix is in the other format, this parameter can be only set to
a string of a maximum of 31 characters. Because the domain name suffix 3gppnetwork.org is case
insensitive, it will be displayed in lowercase letters. For example, if you set REALM to
SOFT300.IMS.mnc001.mcc001.3gPPNETwork.org, the domain name suffix of the realm is
displayed as SOFT300.IMS.mnc001.mcc001.3gppnetwork.org.
Example:
RMV HSDAINF: IMPI="impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the IMPI supports only the SIP Digest authentication scheme and the IMPI is not used associated
with any subscription data record, RMV HSDAINF is used to remove the IMPI data record.
If the IMPI supports other authentication schemes in addition to the SIP Digest authentication
scheme, RMV HSDAINF is used to remove only the SIP Digest authentication data record for the
IMPI.
Parameter Description:
Example:
MOD HSDAINF: IMPI="impiinfo", HUSERNAME="impiinfo", PWD="pwd",
REALM="huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
At least one of the parameters User name, Password, HA1 value, and Realm must be specified.
For an IMPI, either only HA1 value or both User name and Password must be specified.
If you enter the command in the command input pane and then specify the related parameters, the
Password and HA1 value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
Password and HA1 value are displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
REALM can be set to a string of 32 to 46 characters only when the domain name suffix is .
3gppnetwork.org. If the domain name suffix is in the other format, this parameter can be only set to
a string of a maximum of 31 characters. Because the domain name suffix 3gppnetwork.org is case
insensitive, it will be displayed in lowercase letters. For example, if you set REALM to
SOFT300.IMS.mnc001.mcc001.3gPPNETwork.org, the domain name suffix of the realm is
displayed as SOFT300.IMS.mnc001.mcc001.3gppnetwork.org.
Example:
1. LST HSDAINF: IMPI="impiinfo";
2. LST HSDAINF: HUSERNAME="impiinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
IMPI: IMPI Number
HUSERNAME: User Name
PWD: Password
REALM: Realm
HA1: HA1 Value
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Either IMPI or User name must be specified. If HA1 value is specified, the HSS displays an error
message when User name is used to query a SIP Digest authentication data record.
Example:
CHK HSDAPWD: HUSERNAME="impiinfo", PWD="pwd";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the
Password is displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
Password is displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
Example:
SET HEIA: IMPI="impiinfo", EIAFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None..
Example:
LST HEIA:IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
IMPI: IMPI Number
IMSI: IMSI Number
IPV4ADDR: IPV4 Address
IPV6ADDR: IPV6 Address
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
SET HEAA: IMPI="impiinfo", EAAFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
LST HEAA: IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
IMPI IMSI
Parameter description:
IMPI: IMPI Number
IMSI: IMSI Number
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Function: This command is used to add an IMPI that supports the NASS Bundled
authentication scheme or add a NASS Bundled authentication data record for an existing
IMPI to the HSS service database.
Parameter Description:
Example:
ADD HNBAINF: IMPI="impiinfo", LINEIDIDX=1, LINEID="huawei";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
RMV HNBAINF: IMPI="impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If the specified IMPI supports only NASS Bundled authentication and the IMPI is not used, this
command removes the IMPI.
If the specified IMPI supports other authentication mechanism in addition to NASS Bundled
authentication, this command removes only the NASS Bundled authentication information of the
IMPI.
Example:
LST HNBAINF: IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
LINEIDIDX LINEID
Parameter description:
LINEIDIDX: Line ID Index
LINEID: Line ID
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
SET HTAA: IMPI="impiinfo", TAAFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If an IMPI is defined and supports only the TAA authentication scheme, you cannot cancel the TAA
authentication scheme of the IMPI. Otherwise, the HSS displays that the operation has failed.
Example:
TAAFLAG
Parameter description:
TAAFLAG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
SET HCAA: IMPI="460001234567890@huawei.com", CAVEAKAFLG=TRUE,
UIMID="12345678";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
LST HCAA: IMPI="460001234567890@huawei.com";
Response:
Success output: Horizontal format
Output:
Parameter description:
IMPI: IMPI Number
CAVEAKAFLG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
UIMID: UIMID
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
LST HAUTHINF: IMPI="impiinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
AKAFLAG: 1 | 0
EAAFLAG: 1 | 0
SDAFLAG: 1 | 0
TAAFLAG: 1 | 0
EIAFLAG: 1 | 0
HDAFLAG: 1 | 0
NBAFLAG: 1 | 0
CAVEAKAFLAG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
CHK HHA1: IMPI="impiinfo", HA1="11112222333344445555666677778888";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the
HA1 value is displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the
HA1 value is displayed in plain text.
Example:
1. ADD HSUB: SUBID="subinfo", IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com",
PBXUSERFLAG=FALSE;
2. ADD HSUB: SUBID="subinfo", IMPI="impiinfo", IMPU="tel:+33145297![247].*!",
IMPUTYPE=WIMPU, PBXUSERFLAG=FALSE, SYSNO=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
IMPI is mandatory if the ADD HSUB command is used to define an IMS subscription data record and
add an IMPU for the record.
Set a subscription ID that uniquely identifies an IMS subscriber, provide the capacity set
for the subscriber by using a capacity set template, or configure the CS and IMS service
data consistency flag for the subscriber.
Add one or two IMPIs that support the HTTP Digest, SIP Digest, Early AKA, or Trusted
Access authentication scheme and provide the charging address for the IMPIs by using a
charging address template.
Associate 1 to 10 IMPUs with the IMPIs, provide services for the IMPUs by using an
IMPU template and a service profile template, and configure the IMPUs in an implicitly
registered set (IRS) and an alias group.
The command improves the efficiency in adding an IMS subscription if the subscriber model
of the subscriber to be added is consistent with the function description.
Parameter Description:
Example:
1. ADD HHSSSUB: SUBID="subinfo", IMPI="impiinfo",
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"",
HUSERNAME="hss_user", PWD="pwd", IRSID=1, ALIASID=1;
2. ADD HHSSSUB: SUBID="subinfo", IMPI="impiinfo",
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"",
HUSERNAME="hss_user", PWD="pwd", REALM="huawei.com", CHARGTPLID=10,
IMPUTPLID=11, IRSID=1, ALIASID=1, SYSNO=10;
3. ADD HHSSSUB: SUBID="subinfo", IMPI="impiinfo", IMPIAUTHTYPE=EAA,
IMSI="460001234567890", ISDN="8613988888888", IMPI2="impiinfo2",
IMPI2AUTHTYPE=TAA, IMPULIST="\"sip:+8613988888888@huawei.com\"&\"tel:
+8613988888888\"&\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"",
BARIMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"",
CHARGTPLID=0, SPTPLID=1, IMPUTPLID=1, IRSID=1, ALIASID=1,
CONSFLG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
The IMPI or IMPI2 specified in ADD HHSSSUB cannot be associated with an IMSI by running
ADD HIMSI.
The first IMSI specified in ADD HHSSSUB is set as the main IMSI when both of the following
conditions are met:
- Set the specified IMSI as the main IMSI is set to TRUE by running SET
HSYSTEMPARA.
- Authentication type of IMPI or Authentication type of IMPI2 is set to AKA(IMS AKA) by
running ADD HHSSSUB.
You can also run MOD HMSIM to set the main IMSI of a subscriber.
When Authentication type of IMPI or Authentication type of IMPI2 is set to AKA(IMS AKA),
the IMSI or IMSI2 specified cannot be loaded with a KI by ADD KI in advance.
IMPI:
- The IMPI must be in the NAI format and case-sensitive.
- The IMPI does not have any authentication data.
IMPIAUTHTYPE:
- The KI must be added to the IMPI by running ADD HKI before you run ADD HHSSSUB
with this parameter set to AKA(IMS AKA).
HUSERNAME:
- This parameter is optional when Authentication type of IMPI is HDA or SDA.
- This parameter is mandatory when Authentication type of IMPI is not specified. It must be
specified in the MML command line input pane.
PWD:
- This parameter is optional when Authentication type of IMPI is HDA or SDA.
- This parameter is mandatory when Authentication type of IMPI is not specified. It must be
specified in the MML command line input pane.
- To improve the system security, you are advised to set the password according to the rules
described in the Note.
REALM:
- This parameter is mandatory when Authentication type of IMPI is SDA.
- This parameter is optional when Authentication type of IMPI is not specified. To configure
the HTTP Digest authentication scheme for the IMPI, do not specify Realm. To configure the
SIP Digest authentication scheme for the IMPI, specify Realm in the MML command line
input pane.
- This parameter can be set to a string of 32 to 46 characters only when the domain name suffix
is .3gppnetwork.org. If the domain name suffix is in the other format, this parameter can be
only set to a string of a maximum of 31 characters. Because the domain name suffix
3gppnetwork.org is case insensitive, it will be displayed in lowercase letters. For example, if
you set REALM to SOFT300.IMS.mnc001.mcc001.3gPPNETwork.org, the domain name
suffix of the realm is displayed as SOFT300.IMS.mnc001.mcc001.3gppnetwork.org.
HA1 is optional when Authentication type of IMPI is HDA or SDA.
IMSI:
- This parameter is mandatory when Authentication type of IMPI is set to EAA(Early AKA).
- This parameter is mandatory when Authentication type of IMPI is set to AKA(IMS AKA)
and MSISDN is specified.
ISDN is optional when Authentication type of IMPI is set to EAA(Early AKA) or AKA(IMS
AKA).
IMPI2:
- The IMPI must be in the NAI format and case-sensitive.
- The IMPI does not have any authentication data.
IMPI2AUTHTYPE:
- The KI must be added to the IMPI by running ADD HKI before you run ADD HHSSSUB
with this parameter set to AKA(IMS AKA).
HUSERNAME2 is optional when Authentication type of IMPI2 is HDA or SDA.
PWD2 is optional when Authentication type of IMPI2 is HDA or SDA.
REALM2:
- This parameter is mandatory when Authentication type of IMPI2 is SDA.
- This parameter can be set to a string of 32 to 46 characters only when the domain name suffix
is .3gppnetwork.org. If the domain name suffix is in the other format, this parameter can be
only set to a string of a maximum of 31 characters. Because the domain name suffix
3gppnetwork.org is case insensitive, it will be displayed in lowercase letters. For example, if
you set REALM to SOFT300.IMS.mnc001.mcc001.3gPPNETwork.org, the domain name
suffix of the realm is displayed as SOFT300.IMS.mnc001.mcc001.3gppnetwork.org.
HA12 is optional when Authentication type of IMPI2 is HDA or SDA.
IMSI2:
- This parameter is mandatory when Authentication type of IMPI2 is set to EAA(Early
AKA).
- This parameter is mandatory when Authentication type of IMPI2 is set to AKA(IMS AKA)
and MSISDN2 is specified.
ISDN2 is optional when Authentication type of IMPI2 is set to EAA(Early AKA) or AKA(IMS
AKA).
IMPULIST specifies the IMPUs to be associated with the IMS subscription. When setting this
parameter, note the following:
- The list allows 1 to 10 IMPUs separated by an ampersand (&), for example:
"sip:impuinfo1@huawei.com"&"sip:impuinfo2@huawei.com". An escape character (\) must
be added before each quotation mark (").
- The IMPUs must be in the SIP URI or TEL URI format and case-sensitive.
- The IMPUs must be distinct IMPUs.
- If IMPI2 is specified, the IMPUs will be associated with both IMPI and IMPI 2.
BARIMPULIST specifies the IMPUs to be restricted from using services. When setting this
parameter, note the following:
- The list allows 1 to 10 IMPUs separated by an ampersand (&), for example:
"sip:impuinfo1@huawei.com"&"sip:impuinfo2@huawei.com". An escape character (\) must
be added before each quotation mark (").
- The IMPUs must be in the SIP URI or TEL URI format and case-sensitive.
IRSID:
- Value 0 indicates that the IMPUs will not be configured in the same IRS.
- If this parameter is set to a non-zero value, the IMPU list must contain at least two IMPUs and
the first IMPU will be set as the default IMPU.
ALIASID:
- Value 0 indicates that the IMPUs will not be configured in the same alias group.
- If this parameter is set to a non-zero value, IRS ID must be set to a non-zero value.
CONSFLG specifies whether to keep service data consistency between the circuit switched (CS) and
IMS networks.
Example:
1. RMV HHSSSUB: SUBID="subinfo";
2. RMV HHSSSUB: IMSI="460001234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Example:
RMV HSUB: SUBID="subinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
Removing an IMS subscription data record may affect the services provided for the subscriber specified
by the subscription data record. Therefore, make sure this operation serves the intended purpose before
removing an IMS subscription data record.
Example:
MOD HSUBID: SUBID="subinfo", NEWSUBID="new_subinfo";
Output:
None.
Example:
LST HSUB: SUBID="subinfo";
Response:
Success output: Horizontal format
Output:
Parameter description:
SUBID: Subscription ID
IMPI: IMPI Number
IMPU: IMPU Number
SHARED: 1 | 0 Remark: 1 represents TRUE, 0 represents FALSE
IRSID: IRS ID
ALIASID: Alias Group ID
Example:
LST HSUBDATA: SUBID="subinfo";
Response:
Success output: Horizontal format
Output:
SUBDATA
Parameter description:
SUBDATA: Subscription Data
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
The Subscription ID, IMPI, and IMPU are optional. Specify only one of them.
The HSS queries the subscription data based on the setting of the Subscription ID, IMPI, or IMPU.
Example:
SET HPBXU: SUBID="subinfo", PBXUSERFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
LST HPBXU: SUBID="subinfo";
Response:
Success output: Horizontal format
Output:
SUBID PBXUSERFLAG
Parameter description:
SUBID: Subscription ID
PBXUSERFLAG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
SET HSUBINFO: SUBID="6290000001", SUBINFO="subinformation";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
If Subscriber Description is not specified, the HSS deletes the description about the subscriber.
Example:
LST HSUBINFO: SUBID="6290000001";
Response:
Success output: Horizontal format
Output:
SUBID SUBINFO
Parameter description:
SUBID: Subscription ID
SUBINFO: Subscriber Description
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Parameter Description:
Example:
SET HCONSFLG: SUBID="subinfo", CONSFLG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For explanations of error codes, see
11"Summary of Error Codes."
None.
Example:
LST HCONSFLG: SUBID="subinfo";
Output:
Success output: Horizontal format
Output:
SUBID CONSFLG
Parameter description:
SUBID:: Subscription ID
CONSFLG:: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD IMSSUB: HLRSN=1, IMSI="123456789", IMPI="impiinfo_1",
IMPULIST="\"sip:impuinf_2@huawei.com\"&\"sip:impuinf_3@huawei.com\"";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
MCAP specifies the mandatory capabilities required to satisfy the subscriber's service
requirements.A mandatory capability set contains a maximum of 32 unique integers, each of which
is a value ranging from 1 to 4294967295 and is separated by an ampersand (&). For example, 1&2.
Meanings of the integers are planned by carriers.
OCAP specifies the optional capabilities required to satisfy the subscriber's service requirements.An
optional capability set contains a maximum of 32 unique integers, each of which is a value ranging
from 1 to 4294967295 and is separated by an ampersand (&). For example, 3&4. Meanings of the
integers are planned by carriers.
SCSCFLIST specifies the S-CSCFs to be associated with the capability set.An S-CSCF list contains
1 to 5 S-CSCFs, each of which is a string of 1 to 127 characters, enclosed in quotation marks ("), and
is separated by an ampersand (&). In addition, an escape character (\) is added before each quotation
mark ("). For example, \"sip:scscf1.huawei.com\"&\"sip:scscf2.huawei.com\".
MEDIAID: Value 4294967295 indicates that the HSS does not provide a media profile for the
subscriber.
SIFCLIST specifies the IDs of the shared iFC templates to be associated with the subscriber. The
list contains 1 to 8 unique shared iFC template IDs, each of which is separated by an ampersand (&).
Shared iFC templates can be added by ADD HSIFCTPL.
Example:
LST IMSSUB: IMSI="123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI}=<IMSI Number>
{ISDN}=<MSISDN Number >
{IMPI}=<IMPI Number>
{IMPU}=<IMPU Number>
{IRSID}=<IRS ID>
{ALIASID}=<Alias Group ID>
{DEFIMPU}=<1 | 0>
Example:
1. ADD HIMPI: SUBID="subinfo", IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com";
2. ADD HIMPI: SUBID="subinfo", IMPI="impiinfo", IMPU="tel:+33145297![247].*!",
IMPUTYPE=WIMPU;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HIMPI: IMPI="impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HIMPI: IMPI="impiinfo", NEWIMPI="new_impiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
1. MOD HHSSIMPI: IMPI="impiinfo", NEWIMPI="new_impiinfo",
NEWIMPIAUTHTYPE=SDA, HUSERNAME="hss_user", PWD="pwd",
REALM="huawei.com";
2. MOD HHSSIMPI: IMPI="impiinfo", NEWIMPI="new_impiinfo",
NEWIMPIAUTHTYPE=TAA;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the KI
value, OPC value, password, and HA1 value are displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the KI
value, OPC value, password, and HA1 value are displayed in plain text.
To improve the system security, you are advised to set the password by following at least three of the
rules below:
- The password must contain upper-case letter.
- The password must contain lower-case letter.
- The password must contain digits.
- The password must contain special characters:`-!@#$%^&*()-_=+\|[{}];:'",<.>/? .
And notice three of the rules below:
- Avoid using three or more than three consecutive letters or digits, for example, ABC or 123.
- Avoid using account or the account in reverse order as the password.
- Avoid using three or more than three same characters, for example, AAA.
REALM can be set to a string of 32 to 46 characters only when the domain name suffix is .
3gppnetwork.org. If the domain name suffix is in the other format, this parameter can be only set to
a string of a maximum of 31 characters. Because the domain name suffix 3gppnetwork.org is case
insensitive, it will be displayed in lowercase letters. For example, if you set REALM to
SOFT300.IMS.mnc001.mcc001.3gPPNETwork.org, the domain name suffix of the realm is
displayed as SOFT300.IMS.mnc001.mcc001.3gppnetwork.org.
Example:
1. ADD HIMPU: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com";
2. ADD HIMPU: IMPI="impiinfo", IMPU="tel:+33145297![247].*!", IMPUTYPE=WIMPU;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HIMPU: IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Removing an IMPU data record will deregister the subscriber identified by the IMPU. In this case, the
subscriber will experience service failure. Therefore, make sure this operation serves the intended
purpose before removing an IMPU data record.
Example:
1. MOD HIMPU:IMPU="sip:impuinfo@huawei.com",
NEWIMPU="sip:new_impuinfo@huawei.com";
2. MOD HIMPU:IMPU="sip:impuinfo@huawei.com", NEWIMPU="tel:+33145297!
[247].*!", NEWIMPUTYPE=WIMPU;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Modifying an IMPU data record will deregister the subscriber identified by the IMPU. In this case, the
subscriber will experience service failure. Therefore, make sure this operation serves the intended
purpose before modifying an IMPU data record.
Example:
CHK HIMPU: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0005: Data to be verified is the same as that in the database
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
SET HIMPUSHARE: IMPU="sip:impuinfo@huawei.com", SHARED=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU cannot be shared when only one IMPI exists in the IMS subscription to which the IMPU
belongs.
The sharing attribute of the default IMPU of an IRS cannot be set.
If an IMPU belongs to an IRS but it is not the default IMPU, the IMPU automatically disengages
from the IRS after the sharing attribute of the IMPU is changed. At the same time, if only one IMPU
exists in the IRS, the IRS is deleted consequently.
Example:
ADD HPSI: PISI="pisiinfo", PUSI="sip:pusiinfo@huawei.com", PUSITYPE=DPUSI,
SYSNO=1;
Output:
If the operation succeeds,the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HPSI: PISI="pisiinfo";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HPSI: PISI="pisiinfo";
Output:
Success output: Horizontal format
Output:
Parameter description:
PISI: PISI Number
PUSI: PUSI Number
IRSID: IRS ID
PUSITYPE: 1 | 2
Remark: 1 represents DISTINCT, 2 represents WILDCARDED
SYSNO: System Serial Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
Example:
None.
Example:
ADD HIMSI: IMSI="460001234567890", ISDN="8613988888888";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If the IMPI is specified, the IMPI cannot associate other IMSIs. Otherwise, the HSS displays that
the operation has failed.
If the IMPI is specified, an IMSI-IMPI mapping is added in the operation.
If the IMPI is not specified, only the IMSI is added in the operation.
Function: This command is used to remove an IMSI data record from the HSS service
database.
Parameter Description:
Example:
RMV HIMSI: IMSI="460001234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HIMSI: IMSI="460001234567890", NEWIMSI="460001234567891";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HHSSIMSI: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com",
NEWIMPI="new_impiinfo", NEWIMPIAUTHTYPE=EAA, IMSI="460001234567890",
ISDN="8613977777777", NEWIMPU="sip:new_impuinfo@huawei.com",
IMPI2="impi2info", IMPU2="sip:impu2info@huawei.com", NEWIMPI2="new_impi2info",
NEWIMPI2AUTHTYPE=TAA, NEWIMPU2="sip:new_impu2info@huawei.com";
Output:
IMPI, IMPU, IMPI2, and IMPU2 must be associated with the same subscriber.
Specify both IMPU and NEWIMPU or neither of them. Similarly, specify both IMPU2 and
NEWIMPU2 or neither of them.
Assign different values to the following parameters:
- IMPI and IMPI2
- IMPU and IMPU2
- NEWIMPI and NEWIMPI2
- NEWIMPU and NEWIMPU2
When setting parameter IMPU, note the following:
- The IMPU must be in SIP URI or TEL URI format.
- The IMPU must be a distinct IMPU.
- IMPUs are classified into wildcard IMPUs and distinct IMPUs. A wildcard IMPU represents a
group of IMPUs whereas a distinct IMPU represents only one IMPU.
- If the IMPU is not associated with an IMPI, you cannot change the IMPU unless the IMPU has
the sharing attribute. To set the sharing attribute for the IMPU, run SET HIMPUSHARE.
When setting parameter NEWIMPU, note the following:
- The NEWIMPU must be in SIP URI or TEL URI format.
- The NEWIMPU must be a distinct IMPU.
When setting parameter IMPU2, note the following:
- The IMPU2 must be in SIP URI or TEL URI format.
- The IMPU2 must be a distinct IMPU.
When setting parameter NEWIMPU2, note the following:
- The NEWIMPU2 must be in SIP URI or TEL URI format.
- The NEWIMPU2 must be a distinct IMPU.
The IMPI, NEWIMPI, IMPI2 and NEWIMPI2 are case-sensitive and must be in NAI format.
Example:
ADD HISDN: IMSI="861381234567890", ISDN="861381234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HISDN: ISDN="861381234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HISDN: ISDN="8613988888888", NEWISDN="8613977777777";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HHSSTN: ISDN="8613988888888", NEWISDN="8613977777777",
IMPU="sip:impuinfo@huawei.com", NEWIMPU="sip:new_impuinfo@huawei.com",
IMPU2="sip:impu2info@huawei.com", NEWIMPU2="sip:new_impu2info@huawei.com";
Output:
MSISDN, IMPU, and IMPU2 must be associated with the same subscriber.
Set different values for IMPU and IMPU2 as well as NEWIMPU and NEWIMPU2.
Specify both IMPU and NEWIMPU or neither of them. Similarly, specify both IMPU2 and
NEWIMPU2 or neither of them.
When setting parameter IMPU, note the following:
- The IMPU must be in SIP URI or TEL URI format.
- The IMPU must be a distinct IMPU.
When setting parameter NEWIMPU, note the following:
- The NEWIMPU must be in SIP URI or TEL URI format.
- The NEWIMPU must be a distinct IMPU.
When setting parameter IMPU2, note the following:
- The IMPU2 must be in SIP URI or TEL URI format.
- The IMPU2 must be a distinct IMPU.
When setting parameter NEWIMPU2, note the following:
- The NEWIMPU2 must be in SIP URI or TEL URI format.
- The NEWIMPU2 must be a distinct IMPU.
Example:
LST HMSID: IMSI="8613988888888";
Output:
Success output: Horizontal format
Output:
Parameter description:
IMPI: IMPI Number
IMSI: IMSI Number
ISDN: MSISDN Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
ADD HASSOC: IMPI="impiinfo", IMSI="460001234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Function: This command is used to remove the association between the IMPI and the IMSI
from the HSS service database.
Parameter Description:
Example:
RMV HASSOC: IMPI="impiinfo", IMSI="460001234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
LST HASSOC: IMPI="impiinfo";
Output:
Success output: Horizontal format
Output:
IMPI IMSI
Parameter description:
IMPI: IMPI Number
IMSI: IMSI Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
MOD HMSIM: IMSI="1234567891", MASTERFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
LST HMSIM:SUBID="subinfo";
Output:
Success output: Mixed format
Output:
{SUBID}=< Subscription ID >
IMSI MASTERFLAG
Parameter description:
SUBID: Subscription ID
IMSI: IMSI Number
MASTERFLAG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
1.LST HSUBBAT:;
2.LST HSUBBAT: FUZZYIMPU="+86134";
Output:
Success output: Horizontal format
Output:
Parameter description:
SUBID: Subscription ID
IMPI: IMPI Number
IMPU: IMPU Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The query result contains subscriber data such as IMSI and MSISDN. To ensure the security of
subscriber data, you must comply with the law and subscriber privacy protection regulations.
Besides, you must strictly control the access to the query results.
Before you obtain required data from the carrier's network, the carrier's maintenance personnel must
anonymize personal data in the required data and approve the anonymized data to prevent the user
data from being disclosed. The anonymization tool can be obtained from the following path at the
website http://support.huawei.com/support/: Software Center > Controlled Tool (Mini-tool
Software) > Core Network Product Line > Core Network IMS > IMS MT Solution > Log
Anonymity Tool.
A maximum of 1000 records can be displayed even if more than 1000 data records are matched.
Parameter Description:
Example:
SET HMOCAP: SUBID="subinfo", MCAP="1&2", OCAP="3&4";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HMOCAP: SUBID="subinfo";
Output:
MCAP OCAP
Parameter description:
MCAP: Mandatory Capability Set
OCAP: Optional Capability Set
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST CAP: IMSI="123456789";
Output:
If the operation succeeds, the system displays an output with the following format:
{MCAP}=< Mandatory Capability Set >
{OCAP}=< Optional Capability Set >
{SCSCF}=< S-CSCF Name >
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
MOD CAP: IMSI="123456789", MCAP="1&2", OCAP="3&4",
SCSCFLIST="\"sip:scscf1.huawei.com\"&\"sip:scscf2.huawei.com\"";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
ADD HCAPSCSCF: SUBID="subinfo", SCSCF="sip:scscf@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
RMV HCAPSCSCF: SUBID="subinfo", SCSCF="sip:scscf@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HCAPSCSCF: SUBID="subinfo";
Output:
SCSCF
Parameter description:
SCSCF: S-CSCF Name
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
SET HCHARGID: IMPI="impiinfo", CHARGTPLID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HCHARGID: PISI="pisiinfo";
Output:
Success output: Horizontal format
Output:
CHARGTPLID
Parameter description:
CHARGTPLID: Charging Address Template ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Function: This command is used to set the registration authority for the specified IMPU in
the HSS service database.
Parameter Description:
Example:
SET HREGAUTH:IMPU="sip:impuinfo@huawei.com", REGAUTH=FALSE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
LST HREGAUTH: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
REGAUTH
Parameter description:
REGAUTH: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
SET HVNCFLAG: IMPU="sip:impuinfo@huawei.com", VNCFLAG=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
LST HVNCFLAG: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
VNCFLAG
Parameter description:
VNCFLAG: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
SET HVNTPLID: IMPU="sip:impuinfo@huawei.com", VNTPLID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-
sensitive.
VNTPLID specifies a visited network template ID. If Visited network template ID is set to 255,
the original roaming authority for the specified IMPU is disabled. The parameter must be defined by
running ADD HVNTPL before being referenced here.
Example:
LST HVNTPLID: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
TPLID
Parameter description:
TPLID: Visited Network Template ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
SET HNNCFLAG: IMPU="sip:impuinfo@huawei.com", NNCFLAG=ACTIVE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
LST HNNCFLAG: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
NNCFLAG
Parameter description:
NNCFLAG: 1 | 0
Remark: 1 represents ACTIVE, 0 represents DEACTIVE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
1. SET HNATPLID: IMPU="sip:impuinfo@huawei.com", NATPLID=10;
2. SET HNATPLID: IMPU="sip:impuinfo@huawei.com", TPLNAME="07550011";
3. SET HNATPLID: IMPU="sip:impuinfo@huawei.com", NATPLID=255;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Either NASS nomadism template ID parameter or NASS nomadism template name parameter must
be specified.
Example:
LST HNATPLID: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
NATPLID TPLNAME
Parameter description:
NATPLID: NASS Nomadism Template ID
TPLNAME: NASS Nomadism Template Name
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If the NASS nomadism template data record identified by the specified IMPU does not exist, the HSS
does not display any information.
Function: This command is used to share a service profile between an IMPU and a base
IMPU in the Home Subscriber Server (HSS) database.
A service profile is a collection of service and subscriber data. When multiple IMPUs
associated with the same IMS subscription share the same service profile, you can run SET
HSPSHARE to share the service profile among the IMPUs.
Parameter Description:
Example:
SET HSPSHARE: BASEIMPU="sip:impuinfo_base@huawei.com",
IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU and Base IMPU must have been defined and associated with the same IMS subscription.
If a service profile associated with a specified IMPU is not shared by other IMPUs, the service
profile is removed after SET HSPSHARE is executed to associate this IMPU with the same service
profile as the base IMPU.
Example:
1. RMV HSPSHARE:
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"";
2. RMV HSPSHARE:
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
After the service profile shared by one or more IMPUs is unshared, the IMPUs will be automatically
associated with a new service profile. The new service profile includes the same subscription data as
the originally shared service profile.
To automatically associate the IMPUs whose service profiles are unshared with different service
profiles, run RMV HSPSHARE with only one IMPU specified for IMPU list each time.
Example:
LST HSPSHARE: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
IMPU
Parameter description:
IMPU: IMPU Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
The IMS-HSS includes location reference information of an IMPU in an SAA sent to the S-CSCF only
after checking that:
The RLI deliver switch software parameter is set to 1.
The IMPU is the default IMPU in an implicitly registered set (IRS).
Example:
After the reference location information of an IMPU is removed, the HSS9860 does not send the
reference location information to the S-CSCF, resulting in failures to provide location services for
the fixed-line subscriber. Exercise caution when deciding to run this command.
The default reference location data record cannot be removed. (To query the default reference
location data record, run LST HNNRLI. The reference location data record whose DEFRLI is 1 in
the output is the default reference location data record.)
Example:
MOD HNNRLI: IMPU="sip:impuinfo@huawei.com", RLINDEX=1, RLI="huawei",
RLT=IEEE-802.11b;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Specify at least one of the following parameters: Reference location information, Reference location
information type, and Set default reference location information.
The IMS-HSS delivers the reference location information only for the default IMPU in an IRS. Therefore,
make sure to add reference location information for the default IMPU in an IRS.
Reference location information type cannot be modified if it has been set to IPRANGE(IPRANGE). You
can run LST HNNRLI to query the value of Reference location information type configured for an IMPU.
Example:
1. LST HNNRLI: IMPU="sip:impuinfo@huawei.com";
2. LST HNNRLI: IMPU="sip:impuinfo@huawei.com", RLINDEX=1;
Output:
Success output: Horizontal format
Output:
Parameter description:
RLINDEX: Reference Location Index
RLI: Reference Location Information
RLT: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |11 | 12 | 13 | 14
Remark: 0 represents IEEE-802.11, 1 represents IEEE-802.11a, 2 represents IEEE-802.11b, 3
represents IEEE-802.11g, 4 represents ADSL, 5 represents ADSL2, 6 represents ADSL2+, 7
represents RADSL, 8 represents SDSL, 9 represents HDSL, 10 represents HDSL2, 11
represents G.SHDSL, 12 represents VDSL, 13 represents IDSL, 14 represents IPRANGE
DEFRLI: 1 | 0
Remark: 1 means the reference location data record is the default one, 0 means the reference
location data record is not the default one.
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
SET HBAR: IMPU="sip:impuinfo@huawei.com", BAR=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HBAR: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
BAR
Parameter description:
BAR: 1 | 0 Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
SET HMEDIAID: PUSI="sip:pusiinfo@huawei.com", MEDIAID=4294967293;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HMEDIAID: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
MEDIAID
Parameter description:
MEDIAID: Subscribed Media Pofile ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
ADD HIFC: IMPU="sip:impuinfo@huawei.com", PRIORITY=1, PARTIND=REGISTERED,
SERVER="sip:server1@huawei.com", DEFHND=SESSION_CONTINUED,
SERVINFO="Service Information", INCLUDEREGREQ=NO, TRIGPT="Triffer point";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
RMV HIFC: IMPU="sip:impuinfo@huawei.com", PRIORITY=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
session is terminated.
DEFHANDLING_DEFAU
LT(Default handling):
The AS determines how to
handle the session.
SERVINFO Character string 1-127 Service Information C
INCLUDEREGR Enumerated YES Specifies whether the C
EQ NO HSS8960 includes the
requested information
contained in a first-party
registration request in a third-
party registration request
initiated by the S-CSCF.
Value:
NO(No): The HSS8960
does not include the
requested information.
YES(Yes): The HSS8960
includes the requested
information.
TRIGPT Character string 1-3072 Trigger Point C
Example:
MOD HIFC: IMPU="sip:impuinfo@huawei.com", PRIORITY=1, NEWPRI=3;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Query the iFC of the specified priority. The PRIORITY parameter must be present in
this case.
Query all the iFC in the service profile. The PRIORITY parameter must not be present
in this case
Parameter Description:
Example:
LST HIFC: IMPU="sip:impuinfo@huawei.com", PRIORITY=1;
Output:
Success output: Horizontal format
Output:
Parameter description:
PRIORITY: Priority
PARTIND: 0 | 1 | 2
Remark: 0 represents REGISTERED, 1 represents UNREGISTERED, 2 represents
PARTIND_DEFAULT
SERVER: AS Address
DEFHND: 0 | 1 | 2
Remark: 0 represents SESSION_CONTINUED, 1 represents SESSION_TERMINATED, 2
represents DEFHANDLING_DEFAULT
SERVINFO: Service Information
INCLUDEREGREQ: 0 | 1 Remark: 1 represents YES, 0 represents NO
TRIGPT: Trigger Point
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
RMV HALLIFC: IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-sensitive.
Example:
RMV HASIFC: IMPU="sip:impuinfo@huawei.com", SERVER="sip:as@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD HSIFC: IMPU="sip:impuinfo@huawei.com", SIFCID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Each IMPU or PUSI can be configured with a maximum of eight shared iFC templates.
Either IMPU or PUSI must be specified.
When setting parameter SIFCID, note the following:
- The shared iFC template ID must be different from any existing shared iFC template ID
associated with the IMPU or PUSI.
- The parameter must be defined by running ADD HSIFCTPL before being referenced.
The IMPU value must be in SIP URI or TEL URI format. The value of the parameter is case-
sensitive.
The PUSI value must be in SIP URI or TEL URI format. The value of the parameter is case-
sensitive.
Example:
RMV HSIFC: IMPU="sip:impuinfo@huawei.com", SIFCID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMPU or PUSI
Old shared iFC template ID
Parameter Description:
Example:
MOD HSIFC: IMPU="sip:impuinfo@huawei.com", OSIFCID=10, NSIFCID=11;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
1. LST HSIFC: IMPU="sip:impuinfo@huawei.com";
2. LST HSIFC: IMPU="sip:impuinfo@huawei.com", SIFCID=11;
Output:
Success output: Horizontal format
Output:
SIFCID
Parameter description:
SIFCID: Shared iFC Template ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
Example:
RMV HSERPRV: IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Function: This command is used to modify the Service provider ID for a specified IMPU or
PUSI in the HSS service database.
Parameter Description:
Example:
MOD HSERPRV: IMPU="sip:impuinfo@huawei.com",
SERPRVID="huawei";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HSERPRV: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
SERPRVID
Parameter description:
SERPRVID: Service provider ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
SET HUSRPRIOR: IMPU="sip:impuinfo@huawei.com",
USRPRIOR=HIGH;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HUSRPRIOR: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
USRPRIOR
Parameter description:
USRPRIOR: 0 | 1 | 2
Remark: 0 represents HIGH, 1 represents MIDDLE, 2 represents LOW
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
data. Standard priority is identified by parameter Standard priority and extended priority is
identified by parameters Extended Priority Namespace and Extended priority.
Parameter Description:
Example:
1. SET HSTDPRIOR: IMPU="sip:impuinfo@huawei.com", STDPRIOR=MIDDLE-
PRIORITY, NAMESPACE=WPS, EXTPRIOR=2;
2. SET HSTDPRIOR: IMPU="tel:+123", NAMESPACE=WPS, EXTPRIOR=255;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Parameter Description:
Example:
LST HSTDPRIOR: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Mixed format
Output:
STDPRIOR
Parameter description:
STDPRIOR: 0 | 1 | 2 | 3 | 4
Remark: 0 represents HIGHEST-PRIORITY, 1 represents HIGH-PRIORITY , 2 represents
MIDDLE-PRIORITY, 3 represents LOW-PRIORITY, 4 represents LOWEST-PRIORITY
NAMESPACE: 0 Remark: 0 represents WPS
EXTPRIOR: Extended Priority
CNAMESP: Custom-built Priority Namespace
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
SET HLRI: IMPU="sip:impuinfo@huawei.com",
LRI=LOOSE_ROUTE_REQUIRED;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LRI
Parameter description:
LRI: 0 | 1
Remark: 0 represents LOOSE_ROUTE_NOT_REQUIRED, 1 represents
LOSE_ROUTE_REQUIRED
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
ADD HASSPID: IMPU="sip:impuinfo@huawei.com", ASSPID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
RMV HASSPID: IMPU="sip:impuinfo@huawei.com", ASSPID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If AS service profile ID is not specified, all the AS service profile IDs associated with the IMPU or
PUSI are removed.
Only one of the parameters IMPU and PUSI must be specified.
Example:
LST HASSPID: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
ASSPID
Parameter description:
ASSPID: AS Service Profile ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
When adding an alias IMPU group, ensure that Alias group ID is not 0 and is not being used in the
IP Multimedia Subsystem (IMS) subscription with which the IMPU list is associated. The IMPU list
must contain two or more IMPUs. IMPUs specified by IMPU list must belong to the same IRS and
share the same service profile.
When adding an IMPU to an existing alias IMPU group, ensure that Alias group ID is not 0 and it
exists in the IMS subscription with which the IMPU list is associated. The IMPU list must contain at
least one IMPU. The IMPUs specified by IMPU list must belong to the same IRS and share the
same service profile as the IMPUs in the alias IMPU group.
When removing an IMPU or all IMPUs from an existing alias IMPU group, ensure that Alias group
ID is 0 and the IMPUs in the IMPU list belong to the same alias IMPU group. When an alias IMPU
group does not contain any IMPU or contains only one IMPU, the alias IMPU group is
automatically removed.
An IMPU can belong to only one alias IMPU group.
Example:
1. SET HREPDATA: IMPU="sip:impuinfo@huawei.com", SERVICEID="3",
SERVICEDATA="SH_RSI_DATA", REPTYPE=REPDATA;
2. SET HREPDATA: IMPU="sip:impuinfo@huawei.com", SERVICEID="3",
SERVICEDATA="SH_STR_DATA", REPTYPE=REPDATA;
3. SET HREPDATA: IMPU="sip:impuinfo@huawei.com", SERVICEID="3",
REPTYPE=REPDATA;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HREPDATA:IMPU="sip:impuinfo@huawei.com", REPTYPE=ALIASREPDATA,
SRVIND="10";
Output:
Success output: Horizontal format
Output:
REPDATA REPTYPE
Parameter description:
Example:
ADD HPREPDATA: IMPU="sip:impuinfo@huawei.com", IMSI="12345678",
SELFSERVICE=TRUE, SMSCADDRESS="67896789",
LOCATIONINFORMATION="460004777", NPINDICATOR=TRUE,
CICINDICATOR=TRUE;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The extended service data is encrypted before it is stored in the database. Therefore, the extended service
data stored in the database is different from the actual input data.
Example:
RMV HPREPDATA:IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Value:
TRUE(True): The HSS8960
implements the equal access
service.
FALSE(False): The HSS8960
does not implement the equal
access service.
BINDINDICATOR Boolean TRUE Specifies the CS binding indicator of C
FALSE the IMPU.
Value:
TRUE(True): The CS binding is
supported.
FALSE(False): The CS binding is
not supported.
Example:
MOD HPREPDATA: IMPU="sip:impuinfo@huawei.com",
IMSI="400612345678";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
Parameter description:
IMPU: IMPU Number
IMSI: IMSI Number
SELFSERVICE: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
SMSCADDRESS: SMSC Address
LOCATIONINFORMATION: Location Information
NPINDICATOR: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
CICINDICATOR: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
BINDINDICATOR: 1 | 0
Remark: 1 represents TRUE, 0 represents FALSE
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If the result report of this command is "decrypted failed", it This parameter indicates that the data is
repository data, and use LST HREPDATA command to query.
string
PUSI Character 1-127 PUSI number C
string
REPTYPE Enum- ALIASREPDATA Specifies the type of the repository C
eration REPDATA data. The service indication of the
repository data is to be queried.
Value:
ALIASREPDATA(Aliasreposito
ry data): The repository data is
alias repository data.
REPDATA(repository data):
The repository data is common
repository data.
Example:
LST HSRVIND: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
SRVIND REPTYPE
Parameter description:
SRVIND: Service Indication
REPTYPE: 0 | 1 Remark: 0 represents ALIASREPDATA, 1 represents REPDATA
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Function: This command is used to set the application server (AS) address for the specified
PUSI in the HSS service database. The AS address must be in SIP format.
Parameter Description:
Example:
SET HAS: PUSI="sip:pusiinfo@huawei.com", AS="sip:asinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
LST HAS: PUSI="sip:pusiinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
AS
Parameter description:
AS: AS Address
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
SET HCSI: IMSI="125353", ISDN="86137565425", CSITYPE=O-CSI, CSITPLID=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Function: This command is used to query the Customized Applications for Mobile network
Enhanced Logic (CAMEL) subscription information for a specified IMSI from the HSS
service database.
Parameter Description:
Example:
LST HCSI: IMSI="125353", CSITYPE=O-CSI;
Output:
Success output: Horizontal format
Output:
Parameter description:
IMSI: IMSI Number
ISDN: MSISDN Number
CSITYPE: 0 | 1 Remark: 0 represents O-CSI , 1 represents T-CSI
CSITPLID: CSI Template ID
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
LST HDALI: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
Parameter description:
IMSALI: IMS Access Location Information
NASSALI: NASS Access Location Information
IPV4ADDR: IPV4 Address
None.
Example:
LST HASSUBDATA: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
SUBASID DATATYPE ASNAME SRVIND ALIASID IMPI ExpiryTime
Parameter description:
SUBASID: The ID of an AS
DATATYPE: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
Remark: 0 represents IMSUserState, 1 represents S-CSCFName, 2 represents
InitialFilterCriteria, 3 represents RepositoryData, 4 represents PSIActivation, 5 represents
AliasesRepositoryData,6 represents AliasesIMPU, 7 represents IMSI, 8 represents UE-
SRVCC- Capability,9 represents ChargingInformation
ASNAME: AS Name
Only one of the two parameters IMPU and PUSI needs to be specified.
Example:
LST HDYNDATA: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com";
Output:
Output:
Parameter description:
IMPI: IMPI Number
IMPU: IMPU Number
IMSUSERST: 0 | 1 | 2
Remark: 0 represents NOTREGISTERED, 1 represents UNREGISTERED, 2 represents
REGISTERED
PENDINGFLAG: 0 | 1
Remark: 0 represents FALSE, 1 represents TRUE
SERVER: Current SCSCF Name
ISEXISTRESTOREDATA: 0 | 1 | 2 | 3
Remark: 0 represents NODATA, 1 represents STDDATA, 2 represents PRVTDATA, 3
represents STDPRVTDATA. Furthermore,
0: S-CSCF Restoration Information does not exist.
1: 3GPP-defined S-CSCF Restoration Information exists.
2: Huawei proprietary S-CSCF Restoration Information exists.
Example:
LST HPSIDYND: PUSI="sip:pusiinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
Parameter description:
PISI: PISI Number
PUSI: PUSI Number
ACTSTATE: 0 | 1
Remark: 0 represents INACTIVE, 1 represents ACTIVE
REGSTATE: 0 | 1
Remark: 0 represents NOTREGISTERED, 1 represents UNREGISTERED
SERVER: Current SCSCF Name
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If only PISI is specified, the dynamic data of all the PUSI-PISI pairs is queried.
If only PUSI is specified, the dynamic data of the PUSI-PISI pair is queried.
If PISI and PUSI are specified, the dynamic data of the PUSI-PISI pair is queried.
Example:
DRG HUSER: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
SET HESRN: IMPU="sip:impuinfo@huawei.com", ESRN=shenzhenbantian;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If ESRN is not specified, all the ESRN associated with the IMPU is removed.
Example:
LST HESRN: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
ESRN
Parameter description:
ESRN: Emergency Service Routing Number
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD HONEKEY: IMPU="sip:impuinfo@huawei.com", WUSERNAME="WUSERNAME",
HTOKEN="HTOKEN", AP="AP";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HONEKEY: IMPU="sip:impuinfo@huawei.com";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
MOD HONEKEY: IMPU="sip:impuinfo@huawei.com",
WUSERNAME="WUSERNAME", HTOKEN="HTOKEN", AP="AP";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
At least one of the parameters Web user name, HTTP token, and Aggregation proxy must be
specified.
Example:
LST HONEKEY: IMPU="sip:impuinfo@huawei.com";
Output:
Success output: Horizontal format
Output:
WUSERNAME HTOKEN AP
Parameter description:
WUSERNAME: Web User Name
HTOKEN: HTTP Token
AP: Aggregation Proxy
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
to manage services.
Value:
ME-based-key(ME-
based-key): Only the
Ks_NAF type of key
can be used.
UICC-based-
key(UICC-based-
key): Only the
Ks_int_NAF type of
key can be used.
ME-UICC-based-
keys(ME-UICC-
based-keys): Either
the Ks_NAF or
Ks_int_NAF type of
key can be used.
LIFETIME Numeral 1-4294967295 Key validity duration C
Example:
ADD HGUSS: IMPI="impiinfo", GSID=PKI-PORTAL, GAAAUTHFLAG=1,
NAFGROUP="nafgroup";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
KEYCHOICE parameter specifies the policy to be used by the HSS9860 to select a key to
authenticate users in the GBA when users use UEs to manage services. Value:
- ME-based-key(ME-based-key): Only the Ks_NAF type of key can be used.
- UICC-based-key(UICC-based-key): Only the Ks_int_NAF type of key can be used.
- ME-UICC-based-keys(ME-UICC-based-keys): Either the Ks_NAF or Ks_int_NAF type of
key can be used.
LIFETIME parameter specifies the validity duration of a cipher key in the GUSS information that
the HSS9860 sends to the BSF over the Zh interface for a subscriber requesting to configure services
on the AS. The BSF checks this parameter to determine whether a subscriber's cipher key is valid.
Value:
- 1-4294967295.
-
Example:
RMV HGUSS: IMPI="impiinfo", GSID=PKI-PORTAL;
Output:
To delete GUSS of a specified GAA service type, specify GAA Service Identifier.
To delete GUSS of all GAA service types, do not specify GAA Service Identifier.
The IMPI must be in NAI format. The value of this parameter is case-sensitive.
Example:
MOD HGUSS: IMPI="impiinfo", GSID=PKI-PORTAL, GAAAUTHFLAG=1,
NAFGROUP="nafgroup";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HGUSS: IMPI="impiinfo";
Output:
Parameter description:
GSID: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13
Remark: 0 represents UNSPECIFIC_SERVICE, 1 represents PKI-PORTAL, 2 represents
AUTHENTICATION_PROXY, 3 represents PRESENCE, 4 represents MBMS, 5 represents
LIBERTY_ALLIANCE_PROJECT, 6 represents UICC-
TERMINAL_KEY_ESTABLISHMENT, 7 represents TERMINAL-
REMOTE_DEVICE_KEY_ESTABLISHMENT, 8 represents ANDSF, 9 represents
GBA_PUSH, 10 represents IMS_BASED_PSS_MBMS, 11 represents
OPENID_GBA_INTERWORKING, 12 represents GENERIC_PUSH_LAYER, 13 represents
OPENID_INTERWORKING
GAAAUTHFLAG: GAA Authorization Flag
NAFGROUP: NAF Grouping
UICCTYPE: 0 | 1
Remark: 0 represents GBA, 1 represents GBA_U
KEYCHOICE: 0 | 1 | 2
Remark: 0 represents ME-based-key, 1 represents UICC-based-key, 2 represents ME-UICC-
based-keys
TIMESTAMP: Time stamp
LIFETIME: Key validity duration
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMPI must be in NAI format. The value of this parameter is case-sensitive.
Example:
ADD HRCSSERVICE: IMSI="460009876543210", ISDN="8613955555555",
WHOLESALEID="1234", SEGMENTID=0, ACPTTERMSTATUS=TCACCEPTED;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Before running ADD HRCSSERVICE to add RCS data for an IMS subscriber, run ADD
HSIFCTPL to add shared iFC templates with IDs 4097, 4099, 4353, and 4609.
All the IMPUs of the subscriber must be configured to share a service profile by running SET
HSPSHARE.
Before running ADD HRCSSERVICE to add RCS data for an IMS subscriber, run ADD HIMSI
and ADD HISDN to associate the subscriber's IMSI and MSISDN with their IMPI.
The subscriber's IMPI must be registered with the SIP Digest authentication scheme using a user
name and a password by running ADD HSDAINF.
Example:
RMV HRCSSERVICE: IMSI="460009876543210";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
MOD HRCSSTATUS: IMSI="460009876543210",
ACPTTERMSTATUS=NOTPROCESSED;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
LST HRCSSERVICE: IMSI="460009876543210";
Output:
Success output: Horizontal format
Output:
Parameter description:
IMSI: IMSI Number
Example:
SET HSMSCADDR: ISDN="4600000091234", SMSCADDR="1234567890";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
RMV HSMSCADDR: ISDN="4600000091234";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
After the SMSC address of a subscriber is deleted, the HSS will not include the SMSC address in UDA
messages sent to the AS.
Example:
LST HSMSCADDR: ISDN="4600000091234";
Output:
Success output: Horizontal format
Output:
ISDN SMSCADDR
Parameter description:
ISDN: MSISDN Number
SMSCADDR: Short Message Center Address
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD HTPLKI: IMPI="impiinfo", K="1234567890abcdef1234567890ABCDEF ",
AKATPLID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
If you enter the command in the command input pane and then specify the related parameters, the KI
value is displayed as a string of asterisks (*).
If you enter the command with the related parameters in the MML command line input pane, the KI
value is displayed in plain text.
Example:
1. ADD HTPLSUB: SUBID="subinfo", IMPI="impiinfo",
IMPU="sip:impuinfo@huawei.com", CAPTPLID=1, CHARGTPLID=1, SPTPLID=1,
IMPUTPLID=1, PBXUSERFLAG=TRUE;
2. ADD HTPLSUB: SUBID="subinfo", IMPI="impiinfo", IMPU="tel:+33145297![247].*!",
IMPUTYPE=WIMPU, CAPTPLID=1, CHARGTPLID=1, SPTPLID=1, IMPUTPLID=1,
PBXUSERFLAG=TRUE, SYSNO=10;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
When Service profile template ID or IMPU template ID is specified, IMPU must be specified.
When Charging template ID, Capability template ID, or IMPU is specified, IMPI must be
specified.
Example:
1. ADD HTPLIMPI: SUBID="subinfo", IMPI="impiinfo",
IMPU="sip:impuinfo@huawei.com", CHARGTPLID=1, SPTPLID=1, IMPUTPLID=1;
2. ADD HTPLIMPI: SUBID="subinfo", IMPI="impiinfo", IMPU="tel:+33145297![247].*!",
IMPUTYPE=WIMPU, CHARGTPLID=1, SPTPLID=1, IMPUTPLID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
When Service profile template ID or IMPU template ID is specified, IMPU must be specified.
Example:
1. ADD HTPLIMPU: IMPI="impiinfo", IMPU="sip:impuinfo@huawei.com", SPTPLID=1,
IMPUTPLID=1;
2. ADD HTPLIMPU: IMPI="impiinfo", IMPU="tel:+33145297![247].*!",
IMPUTYPE=WIMPU, SPTPLID=1, IMPUTPLID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Parameter Description:
Example:
ADD HTPLPSI: PISI="pisiinfo", PUSI="sip:pusiinfo@huawei.com", PUSITYPE=DPUSI,
CAPTPLID=1, CHARGTPLID=1, SYSNO=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD HTPLPUSI: PISI="pisiinfo", PUSI="sip:pusiinfo@huawei.com", PUSITYPE=DPUSI,
SPTPLID=1, PUSITPLID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
None.
Example:
ADD HTPLIFC: IMPU="sip:impuinfo@huawei.com", IFCTPLID=1;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
ADD TPLIMSSUB: HLRSN=1, IMSI="460001234567890", IMPI="impiinfo",
IMPULIST="\"sip:impuinfo_1@huawei.com\"&\"sip:impuinfo_2@huawei.com\"",
VOLTETAG=TRUE, IMSTPLID=1;
Output:
Example:
1. SET HESRNBAT: ESRN="shenzhenbantian", BATTYPE=CONTINUOUS,
IMPU="sip:hello![0-9]{2}!@huawei.com";
2. SET HESRNBAT: ESRN="shenzhenbantian", BATTYPE=DISCONTINUOUS,
IMPUFILE="impu.txt";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
1. MOD HSIFCBAT: OSIFCID=1, NSIFCID=2, BATTYPE=CONTINUOUS,
IMPU="sip:hello![0-9]{2}!@huawei.com";
2. MOD HSIFCBAT: OSIFCID=1, NSIFCID=2, BATTYPE=DISCONTINUOUS,
IMPUFILE="impu.txt";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
1. RMV HSUBBAT: BATTYPE=CONTINUOUS, SUBID="test![0-9]{2}!";
2. RMV HSUBBAT: BATTYPE=DISCONTINUOUS, SUBIDFILE="SUBID_LIST.txt";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The parameter SUBIDFILE is visible and SUBID is not visible when the parameter BATTYPE is
set to DISCONTINUOUS.
The parameter SUBIDFILE is not visible and SUBID is visible when the parameter BATTYPE is
set to CONTINUOUS.
Running this command will delete the SIP digest authentication data of multiple IMPIs at a time.
Use this command unless necessary.
This parameter specifies the SUBID whose subscription will be removed. The value of the SUBID is
case-sensitive. The SUBID supports the regular expression. The regular expression can be used to
specify multiple consecutive SUBIDs. A regular expression begins and ends with an exclamatory
mark (!) and consists of two fields. The field enclosed in square brackets ([]). This parameter
indicates the value range. The field enclosed in curly brackets ({}). This parameter indicates the
length of the digits to be generated. The remaining digits constitute a 1-4 digit number. When a
regular expression is used in a batch operation, the value of SUBID cannot contain any other
exclamatory mark (!) besides those contained in the regular expression.
Example:
1. RMV HSDABAT: BATTYPE=CONTINUOUS, IMPI="test![0-9]{2}!";
2. RMV HSDABAT: BATTYPE=DISCONTINUOUS, IMPIFILE="IMPI_LIST.txt";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Value:
TRUE: The HSS9860 adds or
changes the common MSISDN.
FALSE: The HSS9860 removes
the common MSISDN.
M2MCISDN Character string 1-15 Specifies the new common C
MSISDN.
Example:
MOD M2MCISDN: IMSI="460000009123456", PROV=TRUE,
M2MCISDN="460000001111111";
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
LST M2MCISDN: IMSI="460000009012345";
Output
If the operation succeeds, the format of the returned message is as follows:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ M2MCISDN}=<<NULL> | M2MCISDN Number >,
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD EPSODB: IMSI="461111111111111", EPSODBPOS=BAPOS;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
LST EPSODB="460000009012345";
Output
If the operation succeeds, the format of the returned message is as follows:
{IMSI}=<IMSI number>
{ISDN}=<MSISDN number>
{ EPSODBPOS}=<NOBPOS|BAPOS|BHPLMNAPROAM|BALLAPROAM>,
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Function: This command is used to provide or withdraw an MAP address restriction template
for a subscriber.
Parameter Description:
Example:
MOD MAPADDRRES: IMSI="460000009123456", PROV=TRUE, TPLID=4;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together.
Example:
LST MAPADDRRES: IMSI="460000009123456";
Output
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ ISDN }=< ISDN Number>,
{ TPLID }=< MAP address restriction template ID >
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
MOD STE: IMSI="460000009123456", STE_PROV =TRUE, GMLC_ADD="12345";
Output:
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
LST STE: IMSI="460000009123456";
Output:
If the operation succeeds, the system displays an output with the following format:
IMSI = <IMSI number>
MSISDN = <MSISDN number>
STE_PROV = <TRUE|FALSE>
GMLC_ADD = < GMLC Address>
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The parameters IMSI and ISDN are mutually exclusive. Specify only one of them.
Example:
MOD TPLROAMPER: IMSI="460000009123456", PROV=TRUE, TPLTYPE=CS,
TPLID=4;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together.
Function: This command is used to query information about the Preferred Roaming Service
for a subscriber.
Parameter Description:
Example:
LST TPLROAMPER: IMSI="460000009123456";
Output
If the operation succeeds, the system displays an output with the following format:
{ IMSI }=< IMSI Number>,
{ ISDN }=< ISDN Number>,
{ TPLTYPE}=< CS/PS >
{ TPLID }=< 1-999 >
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
IMSI and ISDN are optional. Specify only one of the them. They cannot be present together .
Example:
MOD SPN: IMSI="460000009123456", PROV=TRUE, FTN="8613900000",
PROPERTY=INTERNATIONAL;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
LST SPN: IMSI="460000009123456";
Output
If the operation succeeds, the system displays an output with the following format:
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
ADD HASHOST:ASID=1, HOSTNAME="as1.huawei.com",
REALMNAME="huawei.com";
Output
If the operation succeeds, the system displays an output with the following format:
{ASID}={ASID}
{HOSTNAME}={Host name}
{REALMNAME}={Realm name}
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The settings in this command take effect only when AS ID management mode is set to
STORE_IN_USCDB running SET HSYSTEMPARA.
A maximum of 1000 mapping records can be added.
Example:
RMV HASHOST:ASID=1;
Output
If the operation succeeds, the system displays an output with the following format:
{ASID}={ASID}
{HOSTNAME}={Host name}
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Specify either ASID or Host name. If both of them are specified, the system displays the error
"Parameter conflict".
AS IDs are used by the HSS9860 to process PNR/PNA and SNR/SNA messages. Service exception
may occur after you incorrectly delete the mapping between an AS ID and an peer AS entity.
Parameter Description:
Example:
LST HASHOST:ASID=1;
Output
If the operation succeeds, the system displays an output with the following format:
{SYSNO}={SYSNO}
{ASID}={ASID}
{HOSTNAME}={Host name}
{REALMNAME}={Realm name}
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Specify either ASID or Host name. If both of them are specified, the system displays the error "Parameter
conflict"
Example:
MOD NTUCSI: IMSI="460000009012345", PROV=ADD, UCSIID =1;
Output
If the operation succeeds, the system displays one of the following messages:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
The HSS9860 uses the MOD NTUCSI configuration only when UCSI subscription management
mode in SET MAPSERV is set to NON-Template.
A maximum of 20 U-CSI templates can be associated with the same subscriber identities. When you
attempt to add a U-CSI template for subscriber identities that have been associated with 20 U-CSI
templates,"ERR3047 Maximum limitation exceeded" is displayed. You can run MOD NTUCSI to
delete unnecessary U-CSI templates before you add one.
Example:
LST SPN: IMSI="460000009012345";
Output:
If the operation succeeds, the system displays an output with the following format:
{IMSI} = <IMSI number>
{MSISDN} = <MSISDN number>
{TPLID} = <0-6534>
“SCODE” “GSMSCFADD” “PUSSDOPTION” “FUNCTION” “MATCH_RULE”
{Service code} + {gsmSCF address} +
{"NONE"|"ONLY_MSISDN"|"ONLY_VLRNUM"|"BOTH_MSISDN_VLRNUM"|"NO_DE
STREF"|"BSAMSISDN"|"DESTREF_MSISDN"} +
{"GSMMODE"|"WAPMODE"|"GSMSCF"|"MAP"|"GSMSPECIALMODE"} + {
"MAX_MATCH"|"ALL_MATCH"}
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
MOD VMCC: IMSI="460000009012345", VMCC=TRUE;
Response
If the operation succeeds, one of the following success codes is displayed:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
LST VMCC: IMSI="460000009012345";
Response
If the operation succeeds, the format of the returned message is as follows:
{IMSI} = <IMSI number>
{MSISDN} = <MSISDN number>
{VMCC} = <TRUE|FALSE >
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
MOD DND: IMSI="460000009012345", PROV=TRUE;
Response
If the operation succeeds, one of the following success codes is displayed:
SUCCESS0001:Operation is successful
SUCCESS0002:Already existed, not changed
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
LST DND: IMSI="460000009012345";
Response
If the operation succeeds, the format of the returned message is as follows:
{IMSI} = <IMSI number>
{MSISDN} = <MSISDN number>
{PROV} = <TRUE|FALSE >
If the operation fails, the error codes will be returned. For details of the above error codes, see
11"Summary of Error Codes."
The IMSI and MSISDN parameters are optional. Specify only one of them.
Example:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Run this command when VoLTE Sh interface SS data format and FTN format are configured as
follows:
VoLTE Sh interface SS data format is set to 1 by running MOD INSP.
FTN format is set to SIP_FORMAT by running SET HSYSTEMPARA.
Parameter Description:
Example:
5. LST HPURREPDATA: IMPU="sip:impuinfo1@huawei.com",
SAVEAS="lsthpurrepdata01.txt";
6. LST HPURREPDATA: STARTTIME=2016&06&06&09&00&00,
ENDTIME=2016&06&07&09&00&00, SAVEAS="lsthpurrepdata02.txt";
Output:
If LST HPURREPDATA is successful, the HSS9860 displays a message indicating that the
operation succeeded.
Parameter description:
TIME: This parameter indicates the time when the command was executed.
IMPU: This parameter indicates the IMPU or PUSI of the subscriber whose repository data is
queried.
RESULT: This parameter indicates whether the PUR message successfully or fails to update
repository data.
MMLCOMMAND: This parameter indicates the operation to update repository data upon a
PUR message.
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Example:
7. SET HPURREPDATA: IMPU="sip:impuinfo1@huawei.com", REPDATA="<?xml
version\=\"1.0\"?><Sh-
Data><RepositoryData><ServiceIndication>3</ServiceIndication><SequenceNumber>0
</SequenceNumber><ServiceData></ServiceData></RepositoryData></Sh-Data>",
REPTYPE=ALIASREPDATA, AS="as1.huawei.com";
8. SET HPURREPDATA: STARTTIME=2016&05&31&09&00&00,
ENDTIME=2016&06&01&09&00&00;
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
Specify either subscriber-specific parameters (IMPU, Repository data, Repository data type, and
AS host name) or time-specific parameters (Start time, End time, and Speed). In subscriber-
specific parameters, IMPU and Repository data are mandatory. In time-specific parameters, Start
time is mandatory.
When End time is specified, Start time is mandatory. Start time must be earlier than End time.
Parameter Description:
Example:
1. SND HPNR: IMPU="sip:impuinfo1@huawei.com", AS="123",
DATAREF=RepositoryData;
2.SND HPNR: STARTTIME=2016&05&31&09&00&00,
ENDTIME=2016&06&01&09&00&00, AS="as1.huawei.com", DATAREF=RepositoryData;
3. SND HPNR: IMPU="sip:impuinfo1@huawei.com", AS="as1.huawei.com",
DATAREF=RepositoryData, CHECKEXIST=FALSE, SERVICEID="10";
Output:
If the operation succeeds, the system displays the following message:
SUCCESS0001:Operation is successful
If the operation fails, the system displays an error code. For details of the above error codes,
see 11"Summary of Error Codes."
10 Common Enumerations
BS20 20 Bearer service code 20, circuit duplex asynchronous (CDA) data service
BS21 21 Bearer service code 21 CDA-300 bps
BS22 22 Bearer service code 22 CDA-1200 bps
BS23 23 Bearer service code 23 CDA-1200-75 bps
BS24 24 Bearer service code 24 CDA-2400 bps
BS25 25 Bearer service code 25 CDA-4800 bps
BS26 26 Bearer service code 26 CDA-9600 bps
BS30 30 Bearer service code 30, circuit duplex synchronous (CDS) data service
BS31 31 Bearer service code 31 CDS-1200 bps
BS32 32 Bearer service code 32 CDS-2400 bps
BS33 33 Bearer service code 33 CDS-4800 bps
BS34 34 Bearer service code 34 CDS-9600 bps
BS41 41 Bearer service code 41 PAD access CA-300 bps
BS42 42 Bearer service code 42 PAD access CA-1200 bps
BS43 43 Bearer service code 43 PAD access CA-1200-75 bps
BS44 44 Bearer service code 44 PAD access CA-2400 bps
BS45 45 Bearer service code 45 PAD access CA-4800 bps
BS46 46 Bearer service code 46 PAD access CA-9600 bps
BS51 51 Bearer service code 51 PDS-2400 bps
BS52 52 Bearer service code 52 PDS-4800 bps
BS53 53 Bearer service code 53 PDS-9600 bps
BS61 61 Bearer service code 61 Alternate speech and data service
BS81 81 Bearer service code 81 Speech followed by data service (can be any kind of
data service)
ODBBOC
BOICEXHC 3 Barring of all outgoing calls except those directed to home PLMN country
BOCROAM 4 Barring of all outgoing calls when roaming outside home PLMN country
ODBROAM
NOBAR 0 No Barring
BROHPLMN 1 Barring of roaming outside the home PLMN
BROHPLMNC 2 Barring of roaming outside the home PLMN country
BROHPLMNCGPRS 3 Barring GPRS of roaming outside the home PLMN country
provisioned 0 -
active 1 -
service request.
notifyAndVerify- 2 The MSC/SGSN/MME sends a notification to an MS/UE before it
LocationNotAllowedIfNoR obtains MS/UE's location information. If the MS/UE does not
esponse respond, the LCS service procedure ends.
locationNotAllowed 3 The MSC/SGSN/MME does not process the LCS service request
sent from such an LCS client.
10.21 PrivacyException1-ExceptionClientList1-GMLC-
Restrict(LCSPGMLCR) Enumeration
Name Value Description
hplmn 0 The gateway mobile location center (GMLC) must reside in the HPLMN.
home-country 1 The GMLC must reside in the home country.
UNKNOWN 0x00 -
FRENCH 0x01 -
ENGLISH 0x02 -
GERMAN 0x03 -
RUSSIAN 0x04 -
SPANISH 0x05 -
SPECIAL1 0x06 -
SPECIAL2 0x07 -
SPECIAL3 0x08 -
RESERVE 0x09 -
COMMON 0x0a -
SUPERIOR 0x0b -
DATACALL 0x0c -
TESTCALL 0x0d -
SPARE 0x0e -
PAYPHONE 0x0f -
16 0x10 -
17 0x11 -
… … …
31 0x1f -
COIN 0x20 -
33 0x21 -
… … …
254 0xfe -
MNP 0xff
1K 1 1 Kbps
2K 2 2 kbit/s
3K 3 3 kbit/s
4K 4 4 kbit/s
5K 5 5 kbit/s
6K 6 6 kbit/s
7K 7 7 kbit/s
8K 8 8 kbit/s
9K 9 9 kbit/s
10K 10 10 kbit/s
11K 11 11 kbit/s
12K 12 12 kbit/s
13K 13 13 kbit/s
14K 14 14 kbit/s
15K 15 15 kbit/s
16K 16 16 kbit/s
17K 17 17 kbit/s
18K 18 18 kbit/s
19K 19 19 kbit/s
20K 20 20 kbit/s
21K 21 21 kbit/s
22K 22 22 kbit/s
23K 23 23 kbit/s
24K 24 24 kbit/s
25K 25 25 kbit/s
26K 26 26 kbit/s
27K 27 27 kbit/s
28K 28 28 kbit/s
29K 29 29 kbit/s
30K 30 30 kbit/s
31K 31 31 kbit/s
32K 32 32 kbit/s
33K 33 33 kbit/s
34K 34 34 kbit/s
35K 35 35 kbit/s
36K 36 36 kbit/s
37K 37 37 kbit/s
38K 38 38 kbit/s
39K 39 39 kbit/s
40K 40 40 kbit/s
41K 41 41 kbit/s
42K 42 42 kbit/s
43K 43 43 kbit/s
44K 44 44 kbit/s
45K 45 45 kbit/s
46K 46 46 kbit/s
47K 47 47 kbit/s
48K 48 48 kbit/s
49K 49 49 kbit/s
50K 50 50 kbit/s
51K 51 51 kbit/s
52K 52 52 kbit/s
53K 53 53 kbit/s
54K 54 54 kbit/s
55K 55 55 kbit/s
56K 56 56 kbit/s
57K 57 57 kbit/s
58K 58 58 kbit/s
59K 59 59 kbit/s
60K 60 60 kbit/s
61K 61 61 kbit/s
62K 62 62 kbit/s
63K 63 63 kbit/s
64K 64 64 kbit/s
72K 65 72 kbit/s
80K 66 80 kbit/s
88K 67 88 kbit/s
96K 68 96 kbit/s
104K 69 104 kbit/s
112K 70 112 kbit/s
120K 71 120 kbit/s
NOExtend 0 NOExtend
8700K 1 8700 kbit/s
8800K 2 8800 kbit/s
8900K 3 8900 kbit/s
9000K 4 9000 kbit/s
9100K 5 9100 kbit/s
9200K 6 9200 kbit/s
9300K 7 9300 kbit/s
9400K 8 9400 kbit/s
9500K 9 9500 kbit/s
9700K 11 9700 kbit/s
9800K 12 9800 kbit/s
9900K 13 9900 kbit/s
10000K 14 10000 kbit/s
10100K 15 10100 kbit/s
10200K 16 10200 kbit/s
10300K 17 10300 kbit/s
10400K 18 10400 kbit/s
10500K 19 10500 kbit/s
10600K 20 10600 kbit/s
10700K 21 10700 kbit/s
10800K 22 10800 kbit/s
10900K 23 10900 kbit/s
11000K 24 11000 kbit/s
11100K 25 11100 kbit/s
11200K 26 11200 kbit/s
11300K 27 11300 kbit/s
11400K 28 11400 kbit/s
33M 91 33 Mbps
34M 92 34 Mbps
35M 93 35 Mbps
36M 94 36 Mbps
37M 95 37 Mbps
38M 96 38 Mbps
39M 97 39 Mbps
40M 98 40 Mbps
41M 99 41 Mbps
42M 100 42 Mbps
43M 101 43 Mbps
44M 102 44 Mbps
45M 103 45 Mbps
46M 104 46 Mbps
47M 105 47 Mbps
48M 106 48 Mbps
49M 107 49 Mbps
50M 108 50 Mbps
51M 109 51 Mbps
52M 110 52 Mbps
53M 111 53 Mbps
54M 112 54 Mbps
55M 113 55 Mbps
56M 114 56 Mbps
57M 115 57 Mbps
58M 116 58 Mbps
59M 117 59 Mbps
60M 118 60 Mbps
61M 119 61 Mbps
62M 120 62 Mbps
63M 121 63 Mbps
10 OCT 1 10 octet/s
20 OCT 2 20 octet/s
30 OCT 3 30 octet/s
40 OCT 4 40 octet/s
50 OCT 5 50 octet/s
60 OCT 6 60 octet/s
70 OCT 7 70 octet/s
80 OCT 8 80 octet/s
90 OCT 9 90 octet/s
100 OCT 10 100 octet/s
110 OCT 11 110 octet/s
120 OCT 12 120 octet/s
130 OCT 13 130 octet/s
140 OCT 14 140 octet/s
150 OCT 15 150 octet/s
160 OCT 16 160 octet/s
170 OCT 17 170 octet/s
180 OCT 18 180 octet/s
190 OCT 19 190 octet/s
200 OCT 20 200 octet/s
210 OCT 21 210 octet/s
220 OCT 22 220 octet/s
230 OCT 23 230 octet/s
240 OCT 24 240 octet/s
250 OCT 25 250 octet/s
260 OCT 26 260 octet/s
270 OCT 27 270 octet/s
280 OCT 28 280 octet/s
0.05 1 0.05
0.01 2 0.01
0.005 3 0.005
0.004 4 0.004
0.001 5 0.001
0.0001 6 0.0001
0.00001 7 0.00001
0.000001 8 0.000001
0.00000006 9 0.00000006
0.01 1 0.01
0.007 2 0.007
0.001 3 0.001
0.0001 4 0.0001
0.00001 5 0.00001
0.000001 6 0.000001
0.1 7 0.1
10MS 1 10 ms
20MS 2 20 ms
30MS 3 30 ms
40MS 4 40 ms
50MS 5 50 ms
60MS 6 60 ms
70MS 7 70 ms
80MS 8 80 ms
90MS 9 90 ms
100MS 10 100 ms
110MS 11 110 ms
120MS 12 120 ms
130MS 13 130 ms
140MS 14 140 ms
150MS 15 150 ms
200MS 16 200 ms
250MS 17 250 ms
300MS 18 300 ms
350MS 19 350 ms
400MS 20 400 ms
450MS 21 450 ms
500MS 22 500 ms
550MS 23 550 ms
600MS 24 600 ms
650MS 25 650 ms
700MS 26 700 ms
750MS 27 750 ms
800MS 28 800 ms
850MS 29 850 ms
900MS 30 900 ms
950MS 31 950 ms
1000MS 32 1000 ms
1100MS 33 1100 ms
1200MS 34 1200 ms
1300MS 35 1300 ms
1400MS 36 1400 ms
1500MS 37 1500 ms
1600MS 38 1600 ms
1700MS 39 1700 ms
1800MS 40 1800 ms
1900MS 41 1900 ms
2000MS 42 2000 ms
2100MS 43 2100 ms
2200MS 44 2200 ms
2300MS 45 2300 ms
2400MS 46 2400 ms
2500MS 47 2500 ms
2600MS 48 2600 ms
2700MS 49 2700 ms
2800MS 50 2800 ms
2900MS 51 2900 ms
3000MS 52 3000 ms
3100MS 53 3100 ms
3200MS 54 3200 ms
3300MS 55 3300 ms
3400MS 56 3400 ms
3500MS 57 3500 ms
3600MS 58 3600 ms
3700MS 59 3700 ms
3800MS 60 3800 ms
3900MS 61 3900 ms
4000MS 62 4000 ms
NO_CUGBAR 0 There is no intra-CUG call restriction. That is, the intra-CUG subscriber can
originate and terminate calls.
IC_CUGBAR 1 Incoming lock of CUG calls. That is, the intra-CUG subscriber can only
originate calls.
OC_CUGBAR 2 Outgoing lock of CUG calls. That is, the intra-CUG subscriber can only
terminate calls.
ODBPB1 1 Operator
determined barring of PLMN-specific barring type 1
ODBPB2 2 Operator
determined barring of PLMN-specific barring type 2
ODBPB3 3 Operator
determined barring of PLMN-specific barring type 3
ODBPB4 4 Operator
determined barring of PLMN-specific barring type 4
BOTH 1 Both the MS-originated and network-originated PDP context activations are valid.
MSInit 2 Only MS-originated PDP context activations are valid.
NetworkInit 3 Only network-originated PDP context activations are valid.
Parallel_Prefered 5 The sequential ringing takes precedence over the simultaneous ringing when the
MSC supports both ringing solutions. The subscribers are alerted in sequence.
Basic_Tone 1 The same ringback tone is played when the group members are alerted
simultaneously.
Intelligent_Tone 2 The ringback tone of each group member is played when the group members
are alerted simultaneously.
UNSP 5 Query the services that are not supported by the MSC/VLR
ALLSM 7 Query all the dynamic information related to the short message
ALL 6 Send the Cancel Location message to the VLR, Gn/Gp SGSN, MME, S4
SGSN, and AAA at the same time.
ActiveByUPL 1 The HLR considers the subscriber who performs the latest location
update as an activated subscriber.
ActiveByUSSD 2 The HLR considers the subscriber who conducts a USSD operation for
activating itself as an activated subscriber.
PHASE1 1 Required for the gsmSCF to process mobile originated calls or mobile terminated calls.
PHASE2 2 Required for the gsmSCF to invoke supplementary services. Phase 2 enhances the
capabilities of phase1.
PHASE3 3 Required for the gsmSCF to process mobile originated short message services (MO
SMS), general packet radio service (GPRS) sessions, packet data protocol (PDP)
contexts, to control subscriber data in the HLR, and to control network signaling load.
Phase 3 enhances the capabilities of phase 2.
PHASE4 4 Required for the gsmSCF to process mobile terminated short message services (MT
SMS). Phase 4 enhances the capabilities of phase 3.
ReturnLP-CSI 0 The HLR compares the CAMEL phase supported by the GMSC with the CAMEL
phase configured in this template and delivers the CSI data carrying a lower
CAMEL phase.
AllowMTCall 1 The HLR delivers voice service data.
ReturnBAIC 2 The HLR delivers BAIC data for all basic services.
ReturnLPO-CSI 0 The HLR compares the CAMEL phase supported by the GMSC with
the CAMEL phase configured in this template and delivers the CSI
data carrying a lower CAMEL phase.
AllowLocationUpdateWith 1 The HLR delivers voice service data.
ODBBAOC
DenyLocationUpdate 2 The HLR delivers BAIC data for all basic services.
HPLMN 0 The HLR delivers the SMS-CSI data only when the subscriber is roaming
within the home Public Land Mobile Network (HPLMN).
FPLMN 1 The HLR delivers the SMS-CSI data only when the subscriber is roaming
within the forbidden Public Land Mobile Network (FPLMN).
INTERNATIONAL 4 The HLR delivers the SMS-CSI data only when the subscriber is roaming
outside the home country.
HPLMNC 3 The HLR delivers the SMS-CSI data only when the subscriber is roaming
outside the home country.
ALL_PLMN 2 The HLR delivers the SMS-CSI data wherever the subscriber is roaming.
Denied 0 GROUPSIM members are only allowed to change or query its order in the group
by a USSD operation.
Not_Denied 1 GROUPSIM members are allowed to change or query all members' order by USSD
operations.
Not_Support 255 GROUPSIM members are not allowed to change or query other members' order by
USSD operations.
Not_Denied 0 The HLR restricts the calls destined for a GROUPSIM member.
Denied 1 The HLR does not restrict the calls destined for a GROUPSIM member.
Not_Denied 0 The HLR restricts the calls destined for a GROUPSIM member.
Denied 1 The HLR does not restrict the calls destined for a GROUPSIM member.
Error codes can either contain RETCODE=<error code> or ERR, or contain both of them.
3176 ERR3176 Global template data being loaded from the DS. HDU cannot handle other
messages for the moment
3177 ERR3177 Data consistency check of subscriber fail
3178 ERR3178 Number of static subscribers exceeds the maximum
3179 ERR3179 Number of dynamic subscribers exceeds the maximum
3180 ERR3180 Number of OCSI subscribers exceeds the maximum
3181 ERR3181 Number of TCSI subscribers exceeds the maximum
3183 ERR3183 Insufficient DB space
3184 ERR3184 Number of Subscribers exceeds the limitation of DB
3185 ERR3185 SMF resources restricted
3186 ERR3186 NBRUSER conflicted with NBRSB
3187 ERR3187 Provided with the SMSCF service. TS2X cannot be withdrawn
3188 ERR3188 The subscriber is absent
3189 ERR3189 The operation through the MS fails
3190 ERR3190 MSC does not support ISTCommand
3191 ERR3191 IMSI and MSISDN SITE mismatched
3192 ERR3192 Remote DRU not found
3193 ERR3193 Local DRU not found
3194 ERR3194 IMSI or MSISDN Key Prefix not found
3196 ERR3196 Parameters conflict
3197 ERR3197 Pivotal parameters already exists
3198 ERR3198 The ContextId does not exist
3210 ERR3210 Does not support ACC
3211 ERR3211 PLMNSS Conflict With ACC
3212 ERR3212 PLMNSS1 Conflict with ACC Code
3213 ERR3213 PLMNSS2 Conflict with ACC Code
3214 ERR3197 Pivotal parameters already exists
3198 ERR3198 The ContextId does not exist
3210 ERR3210 Does not support ACC
3211 ERR3211 PLMNSS Conflict With ACC
3212 ERR3212 PLMNSS1 Conflict with ACC Code
3240 ERR3240 The number of 3G subscribers reaches the maximum License capacity of the
HLR
3241 ERR3241 The number of MIMSI subscribers reaches the maximum License capacity of
the HLR
3242 ERR3242 The number of ACC subscribers reaches the maximum License capacity of
the HLR
3243 ERR3243 The user's data is Incomplete
3244 ERR3244 The number of loaded KIs exceeds the maximum
3246 ERR3246 The number of CCBS subscribers reaches the maximum License capacity of
the HLR
3247 ERR3247 Subscriber type not matched
3248 ERR3248 Cannot modify the MSISDN associated with the main IMSI
3249 ERR3249 MSISDN not provided
3250 ERR3250 Not support auxiliary IMSIs
3251 ERR3251 Not support the main MSISDN
3256 ERR3256 Initiating Number not registered
3263 ERR3263 The record is not unique
3264 ERR3264 CLIP not provisioned
3267 ERR3267 PLMNSS Conflict With ACR
3278 ERR3278 Expiry Date is invalid
3279 ERR3279 Standby IMSI not exit
4000 ERR4000 AMF in use
4001 ERR4001 AMF serial number not defined
4003 ERR4003 The subscriber has registered a same type of remote party
3281 ERR3281 Not Support Sms Route
3282 ERR3282 The input RN is in conflict with local RN
3283 ERR3283 Updating Location fails. You must manually send Update Location
3284 ERR3284 Acquiring IMSI fails. You must manually send Update Location
3285 ERR3285 Number of NP Donor subscribers reaches the maximum License capacity
3286 ERR3286 Number of NP Recipient subscribers in Other PLM reaches the maximum
License capacity
3301 ERR3301 Number of SMSROUTE subscribers exceeds the maximum
3330 ERR3330 Forbid modifying MSISDN of the subscriber used for COMMON ISDN
3303 ERR3303 The Key not encrypt, please check and input again
3331 ERR3331 Forbid removing the subcriber used for COMMON ISDN
3332 ERR3332 Forbid activating MSISDN of ALS
3333 ERR3333 Forbid activating MSISDN of VVDN
3335 ERR3335 Forbid removing the primary subscriber in a Multi-SIM group
3340 ERR3340 The number of IMEIBIND subscribers reaches the maximum License
capacity of the HLR
3343 ERR3343 PLMNSS6 Conflict with CA service
3344 ERR3344 The template does not contain EPS subscription data
3345 ERR3345 The number of EGR subscribers exceeds the maximum
3346 ERR3346 Multi-SIM Subscriber Group does not exist
3349 ERR3349 MEMBERISDN parameter repeat
3350 ERR3350 The Sms activation isdn must be a member isdn
3351 ERR3351 The Voice activation isdn must be a member isdn
4009 ERR4009 Number of LINKSIM subscribers exceeds the maximum
4010 ERR4010 Number of M2M static subscribers exceeds the maximum
4011 ERR4011 Number of M2M dynamic subscribers exceeds the maximum
3360 ERR3360 K7 serial number not defined
3076 ERR3076 Request own MSISDN not possible
3269 ERR3269 A group member associated with multiple profiles cannot be deleted
independently
3270 ERR3270 The group does not exist
3271 ERR3271 The number of group members exceeds the maximum
3272 ERR3272 The group member number cannot be a special number
3273 ERR3273 The group member must be defined
3274 ERR3274 A number can belong to only one group
3275 ERR3275 The entered number is not a group pilot number
3276 ERR3276 The group member number cannot be a special number
3277 ERR3277 Sending Cancelocation fails during active number change. You must manually
send Cancelocation
3336 ERR3336 COMISDN number is not the primary subscriber in a Multi-SIM group
3337 ERR3337 Forbid deactivating the primary subscriber in a Multi-SIM group
3338 ERR3338 Forbid modifying MSISDN of the primary subscriber used for Multi-SIM
3353 ERR3353 Forbid modifying the order of the primary subscriber in a Multi-SIM group
3354 ERR3354 Forbid removing an auxiliary subscriber in a Multi-SIM group
3355 ERR3355 The MMS activation isdn must be a member isdn
3356 ERR3356 The LCS activation isdn must be a member isdn
3357 ERR3357 Updating a group MSISDN's data succeeds but updating a GROUPSIM
member's data fails
3358 ERR3358 K2 serial number not defined
3375 ERR3375 The operation failed because the HSM is unreachable
3376 ERR3376 This command can be executed only on a convergent site
3380 ERR3380 Unmatched Partition ID
3381 ERR3381 The total number of IMS subscribers defined in the HLR has reached the
license threshold
3382 ERR3382 The number of IMS subscribers with the HLRSN has reached the license
threshold
3383 ERR3383 The subscriber is not Non-3GPP or not defined
3800 ERR3800 The wildcard APN cannot be used as the default APN of a subscriber.
3801 ERR3801 The first APN of an EPS subscriber cannot be a wildcard APN.
3802 ERR3802 The default APN of a subscriber cannot be deleted.
3803 ERR3803 The APNs that have been defined for a subscriber cannot be changed to a non-
default APN.
3804 ERR3804 The parameter value can not be same.
3805 ERR3805 The PS APN can not be specified as default APN.
3806 ERR3806 Paramter APN_TYPE and PDPTYPE conflict.
3807 ERR3807 The paramter APN_TYPE can not be modified.
3808 ERR3808 The subscriber is not registered.
3810 ERR3810 The subscriber is not EPS or not defined.
3812 ERR3812 There is no UE level AMBR data for EPS subscriber.
3813 ERR3813 The number of EPS subscribers reaches the maximum License capacity of the
HLR
3814 ERR3814 Operation not allowed by the security policy
3815 ERR3815 The Subscriber is an EPS subscriber
3900 ERR3900 Writing the message to the resending queue successfully.
4071 ERR4071 Number of MAP Address Restriction subscribers exceeds the maximum
4072 ERR4072 Registering EPS services fails. The subscriber's MSISDN is on the EPS
service blacklist
4073 ERR4073 Changing the EPS subscriber's MSISDN fails. The new MSISDN is on the
EPS service blacklist
4074 ERR4074 If the MSISDN specified does not exist in the HSS, the HSS cannot distribute
the subscriber to a service partition based on the license balancing policy in
the one-logical deployment
4078 ERR4078 Auto-provisioning notification timeout
4079 ERR4079 Auto-provisioning notification failure
900001007 ERR900001007 The value is invalid.
900001008 ERR900001008 Parameter is not specified.
900001009 ERR900001009 Parameter conflict
900001016 ERR900001016 The sub-element number of %s exceeds the maximum number.
900001019 ERR900001019 The sub-elements are repeated in the %s
900005001 ERR900005001 System failure
900003025 ERR900003025 The OP serial number does not exist
900003028 ERR900003028 The AMF serial number does not exist
900003034 ERR900003034 The K4 serial number does not exist
900003052 ERR900003052 The new subscription already exists
900003057 ERR900003057 The New IMPI is already allocated to another subscription
900003059 ERR900003059 The value to be specified for the New IMPU is already used by an IMPU or
PUSI
900003061 ERR900003061 The new MSISDN already exists
900003051 ERR900003051 The subscription does not exist
900003058 ERR900003058 The IMPI does not exist
900003060 ERR900003060 The IMPU does not exist
900003062 ERR900003062 The MSISDN does not exist
900003001 ERR900003001 The user does not exist
900003007 ERR900003007 The IMPUs, IMPIs, and MSISDNs do not belong to the same subscription.
900003050 ERR900003050 The IMPU and the IMPI are not associated
900003063 ERR900003063 The number of IMPIs in the subscription already reaches the maximum
900003064 ERR900003064 The number of IMPUs in the subscription already reaches the maximum
900003065 ERR900003065 The number of MSISDNs associated with the IMSI already reaches the
maximum
900003046 ERR900003046 Only one IMPI exists in the subscription. The IMPU cannot be set to a shared
IMPU
900003053 ERR900003053 The IMPU does not belong to the IRS
900003066 ERR900003066 The IRSIDs of IMPUs in the IMPU list are not the same
900003015 ERR900003015 The IMPIs that the IMPUs are associated with are not the same
900003016 ERR900003016 The roaming template IDs of the IMPUs are not the same
900003017 ERR900003017 The registration authorities of the IMPUs are not the same
900003020 ERR900003020 The IFC of the specified priority does not exist
900003021 ERR900003021 The number of IFCs already reaches the maximum
900003023 ERR900003023 Priority conflict
900003054 ERR900003054 The number of S-CSCFs in the capability set already reaches the maximum
900003055 ERR900003055 The S-CSCF already exists in the capability set
900003056 ERR900003056 The S-CSCF does not exist in the capability set
900003024 ERR900003024 The service profiles of the IMPUs in the IMPU list are not shared
900003049 ERR900003049 The service profiles associated with the IMPI already reaches the maximum
900003047 ERR900003047 The user is not registered
90000369 ERR900003069 The IMPU is the default IMPU of an IRS
900003070 ERR900003070 The default IMPU cannot be barred
900003072 ERR900003072 The user name supporting the Digest authentication already exists
900003074 ERR900003074 Invalid IRS ID
900003077 ERR900003077 The number of IMPUs in a new IRS is insufficient
900003078 ERR900003078 The capabilities in the mandatory capability set conflict with those in the
optional capability set
900003089 ERR900003089 The PISI already exists
900003090 ERR900003090 The value to be specified for the PUSI is already used by a PUSI or IMPU
900003091 ERR900003091 The PISI does not exist
900003092 ERR900003092 The PUSI does not exist
900003095 ERR900003095 The PUSIs do not belong to the same PSI
900003096 ERR900003096 The IRS IDs of PUSIs in the PUSI list are not the same
900003097 ERR900003097 The number of PUSIs in a new IRS is insufficient
900003098 ERR900003098 The PUSI format does not match with PUSITYPE
900003099 ERR900003099 The IMPI is already allocated to another subscription
900003100 ERR900003100 The value to be specified for the IMPU is already used by an IMPU or PUSI.
900003101 ERR900003101 The number of PUSIs of a PSI user reaches the maximum
900003102 ERR900003102 The PUSI to be deleted is the last one
900003104 ERR900003104 The IMPI is not associated with any IMPU
900003105 ERR900003105 The number of PUSIs in an IRS exceeds the maximum number
900003112 ERR900003112 The new IMSI already exists
900003113 ERR900003113 The IMSI does not exist
900003114 ERR900003114 The IMPI is already associated with another IMSI
900003115 ERR900003115 The IMPI is not associated with the IMSI
900003117 ERR900003117 The association between IMPI and IMSI does not exist
900003118 ERR900003118 The IMPI does not support the HTTP Digest authentication scheme
900003120 ERR900003120 The IMSI is already associated with another IMPI
900003121 ERR900003121 The IMPI does not support the Early IMS security
900003123 ERR900003123 The IMPI already supports the AKA scheme
900003124 ERR900003124 The IMPI already supports the HTTP Digest authentication scheme
900003125 ERR900003125 The IMPI does not support the AKA scheme
900003126 ERR900003126 Authentication information does not exist
900003127 ERR900003127 The IMPI supports only one authentication scheme
900003128 ERR900003128 The association already exists
900003131 ERR900003131 Capability ID 0 stands for invalid capability, and it cannot be set together with
other capability IDs
900003132 ERR900003132 The user name does not exist
900003133 ERR900003133 The line ID index of the IMPI already exists.
900003134 ERR900003134 The line ID index of the IMPI does not exist
900003135 ERR900003135 The IMPI does not support the NBA scheme
900003137 ERR900003137 The OPC K4 index does not exist
900003138 ERR900003138 The line ID of the IMPI already exists
900003139 ERR900003150 The new PUSI type conflicts with the existing PUSI type
900003155 ERR900003155 The HSS ID does not exist
900003270 ERR900003270 The IMPI associated with the IMSI already supports EAA,EIA or CAVEAKA
900003271 ERR900003271 The IMPI is not defined
900003275 ERR900003275 The number of IMPIs supporting the TAA authentication exceeds the upper
threshold of License
900003279 ERR900003279 The value to be specified for the IMPI is already used by a PISI
900003280 ERR900003280 The value to be specified for the PISI is already used by an IMPI
900003281 ERR900003281 The value to be specified for the IMPI is already used by an IMPI or PISI
900003282 ERR900003282 The value to be specified for the PISI is already used by a PISI or IMPI
900003283 ERR900003283 The IMSI already exists
900003284 ERR900003284 The MSISDN already exists
900003285 ERR900003285 The loose route indication of the IMPUs are not the same
900003286 ERR900003286 The IMPU format does not match with IMPU type
900003288 ERR900003288 The IMPI already supports the SIP Digest authentication scheme
900003289 ERR900003289 The IMPI does not support the SIP Digest authentication scheme
900003287 ERR900003287 The IMPU is not associated with the specified shared iFC
900003291 ERR900003291 The SiFC template ID does not exist
900003292 ERR900003292 The IMPU already associate with the specified shared iFC
900003295 ERR900003295 The number of shared iFC sets assigned to an IMPU or PUSI reaches the
maximum
900003296 ERR900003296 The one key information of IMPU does not exist
900003298 ERR900003298 The IMPU is not associated with the specified iFC
900003299 ERR900003299 Invalid IMPI format, only IMPI derived from IMSI is allowed
900003301 ERR900003301 UIMID must exist when CAVEAKAFLG is True
900003302 ERR900003302 The IMPI associated with the IMSI already supports EAA or EIA
900003303 ERR900003303 The IMPI does not support the Cave AKA authentication scheme
900003305 ERR900003305 The number of IMPIs supporting the CAVEAKA authentication exceeds the
upper threshold of License
900003307 ERR900003307 The I-U pairs exceed the Maximun
900003400 ERR900003400 The IMPU does not exist or no matching result is found
900003401 ERR900003401 The visited template ID or the visited network address does not exist
900003402 ERR900003402 The SiFC template ID or the IFC of the specified priority does not exist or no
matching result is found
900003403 ERR900003403 The IMPI or PISI does not exist or the IMPI is not defined
900003404 ERR900003404 The IMPU or PUSI does not exist or a service provider ID is already set for
the user
900003405 ERR900003405 The IMPU or PUSI does not exist or the user is not associated with the
specified shared iFC
900003406 ERR900003406 Data to be verified is different from that in the database
900003407 ERR900003407 The IMPU is not associated with the visited network template
900003408 ERR900003408 The IMPU is not associated with the subscribed media profile ID
900003409 ERR900003409 The subscription or PISI does not exist or no matching result is found
900003410 ERR900003410 The IMPU or PUSI does not exist or no matching result is found
900003411 ERR900003411 The IMPU is not associated with the NASS access template
900003412 ERR900003412 The IMPU or the reference location index of the IMPU does not exist or no
matching result is found
900003413 ERR900003413 The IMPU or the reference location index of the IMPU does not exist
900003415 ERR900003415 Database updated but network update failure
900003416 ERR900003416 The NASS access template or the NASS access address does not exist
900003308 ERR900003308 The extended service data already exist
900003309 ERR900003309 The extended service data does not exist
900003310 ERR900003310 The extended service data is decrypted failed
900003311 ERR900003311 The value of location information is invalid
900003312 ERR900003312 SYSNO does not match HLR serial number of KI data
900003420 ERR900003420 The IMPU or PUSI already associate with the specified shared iFC
900003422 ERR900003422 The USERTYPE of IMPU or PUSI is different from that in the database
900003423 ERR900003423 The IMPU or PUSI is not associated with the specified shared iFC
900003426 ERR900003426 The number of records reaches the maximum
900003427 ERR900003427 The number of wildcard IMPU or PUSI records reaches the maximum
900003428 ERR900003428 The wildcard IMPU or PUSI overlaps with an existing wildcard IMPU or
PUSI
900003429 ERR900003429 ENDIP must be higher than or equal to BEGINIP for the address of the NASS
nomadism template
900003430 ERR900003430 IP address segments of the NASS nomadism template conflict
900003476 ERR900003431 The parameter used to specify the NASS nomadism address is inconsistent
with MATCHTYPE in the NASS nomadism template
900003432 ERR900003432 The number of PSI subscribers exceeds the upper threshold of License
900003434 ERR900003434 Not allowed to modify MATCHTYPE from IPsegment to Back or Front
900003435 ERR900003435 Several NASS nomadism templates have identical names. Please use template
IDs to identify the templates
900003440 ERR900003440 Database updated but network update failure because of system error
900003441 ERR900003441 Database updated but network update failure because of subscriber data error
900003442 ERR900003442 The barred IMPU could not be found in IMPULIST
900003443 ERR900003443 The IMPI2 is already allocated to another subscription
900003444 ERR900003444 The value to be specified for the IMPI2 is already used by a PISI
900003445 ERR900003445 The IMPI2 is not defined but have authentication data
900003446 ERR900003446 The IMPI2 is not defined but associated with the IMSI
900003447 ERR900003447 The IMSI2 already exists
900003448 ERR900003448 The MSISDN2 already exists
900003449 ERR900003449 The user name2 supporting the Digest authentication already exists
900003450 ERR900003450 The IMPI is not defined but have authentication data
900003451 ERR900003451 The IMPI is not defined but associated with the IMSI
900003454 ERR900003454 The IMPI does not exist or the IMPI is not defined or the GSID of the IMPI
does not exist
900003455 ERR900003455 The GSID of the IMPI already exists
900003463 ERR900003463 The new IMPI already exists
900003464 ERR900003464 The new IMPI2 already exists
900003465 ERR900003465 The value to be specified for the New IMPU2 is already used by an IMPU or
PUSI
900003466 ERR900003466 The IMSI or MSISDN is not associated with any IMPI or the IMPI is not
defined
900003467 ERR900003467 The MSISDN does not exist or is not associated with the IMSI
900003468 ERR900003468 The Password of digest does not exist
900003469 ERR900003469 The SPID does not exist
900003470 ERR900003470 This command cannot be executed because RCS service already exists
900003471 ERR900003471 The RCS service already exists
900003472 ERR900003472 The RCS service not exists
900003473 ERR900003473 The associated subscriber is not defined
900003474 ERR900003474 The length of wildcard record prefix is less than the route prefix length
configured
900003475 ERR900003475 The route prefix length is not configured
900003476 ERR900003476 Incorrect repository data type
900003477 ERR900003477 The auxiliary subscriber must be a VoLTE or VoWiFi subscriber
900003478 ERR900003478 IMPUs associated with the main card do not belong to any IRS
900003479 ERR900003479 IMPUs associated with the main card do not belong to any alias set
900003480 ERR900003480 IMPUs associated with the main card do not share any service profile
900003481 ERR900003481 IMPUs associated with the main card do not belong to the same IRS
900003482 ERR900003482 IMPUs associated with the main card do not belong to the same alias set
900003483 ERR900003483 IMPUs associated with the main card do not share the same service profile
900003484 ERR900003484 PECF and PCCF addresses cannot be simultaneously removed from a
charging template
900003485 ERR900003485 The authentication status of synchronized CS domain repository data cannot
be changed
900003486 ERR900003486 Either a PECF or PCCF address must exist in the charging template
900003487 ERR900003487 The partition information about the subscriber cannot be obtained in IMS-
HSS
900003488 ERR900003488 The command output exceeds the maximum length allowed
900003489 ERR900003489 The password length does not meet password strength requirements
900003490 ERR900003490 The password cannot contain a user name
900003491 ERR900003491 The password cannot contain an incremental sequence of 3 or more
consecutive numbers or letters
900003492 ERR900003492 The characters contained in the password do not meet password strength
requirements
900003493 ERR900003493 The AS ID already exists
900003494 ERR900003494 The host name already exists
900003495 ERR900003495 The AS information does not exist
900003496 ERR900003496 The number of AS records has reached the maximum limit
900003497 ERR900003497 Authentication information of IMPI2 does not exist
900003498 ERR900003498 Other authentication schemes have been provided for the IMPI
900003499 ERR900003499 Other authentication schemes have been provided for IMPI2
900003500 ERR900003500 ADD HHSSSUB failed to add a convergent 2G/3G/4G subscriber to use AKA
for authenticating IMPI
900003501 ERR900003501 ADD HHSSSUB failed to add a convergent 2G/3G/4G subscriber to use AKA
for authenticating IMPI2
900003514 ERR900003514 A process is still running, please try later.
12 Abbreviations:
BOIC-exHC Barring of outgoing international calls except those directed to the home PLMN
country
CB Call barring
CF Call forwarding
CFB Call forwarding on mobile subscriber busy
CFNRc Call forwarding on mobile subscriber not reachable
CFNRy Call forwarding on no reply
CFU Call forwarding unconditional
CLIP Calling line identification presentation
CLIR Calling line identification restriction
COLP Connected line identification presentation
COLR Connected line identification restriction
CW Call waiting
ECT Explicit call transfer
GMSC Gateway mobile-services switching center
GPRS General packet radio service
GSM Global System for Mobile Communications
HOLD Call hold
IMSI International mobile subscriber identity
ISDN integrated Services digital network
LCS Location service
MPTY MultiParty (Multi Party)
MSC Mobile switching center
MSISDN Mobile station international ISDN number
MSRN Mobile station roaming number
RSZI Regional Subscription Zone Identity
PGW Provisioning Gateway
USSD Unstructured supplementary service data
VLR Visitor location register
VMSC Visited mobile switching center
WPA Wi-Fi Protected Access