Beruflich Dokumente
Kultur Dokumente
ChillPAC 133
Sabroe ChillPAC designs feature the following Sabroe ChillPAC designs provide customers with
¢T
he standard range is factory-assembled, based on uU
se of well-tested Sabroe standard solutions that
an innovative Sabroe screw compressor design. feature top-quality industrial components improves
safety as well as ensuring maximum reliability and
low operating costs. It also provides easy worldwide
access to service and parts.
¢T
he design is based on the flooded evaporating uA
mmonia is the most environmentally acceptable
system, using ammonia only. This provides very and future-compatible refrigerant currently available.
high COP, outstanding part-load performance – and Exceptional reliability and very low energy
no limitations on the condenser pressure, because consumption also result in the lowest possible life
the condensing temperatures make full use of the cycle costs.
ambient temperature differences.
¢T
he new design is unique. Compared with u Significantly reduced installation costs due to smaller
conventional chillers, the ChillPAC weighs less, uses size, and additional energy savings achieved from
less than half the amount of refrigerant and has less the low differential pressure on the secondary side.
than half the footprint. In terms of size, it is equal to Provides an easy, safe and cost-effective upgrade
or smaller than HFC/HCFC chillers. path for replacing existing HCFC chillers.
¢A
ll Sabroe ChillPAC units are operationally tested uF
actory testing confirms specified performance as
with refrigerant at the specialist End Of Line (EOL) well as trouble-free on-site start-up and operation
Test Centre before dispatch. A capacity test is also as soon as the refrigerant charge has been added
available. and utility connections made.
Shorter, safer start-up and commissioning reduce
overall costs significantly.
Comprehensive range
There are now 6 different models of Sabroe ChillPAC Sabroe ChillPAC units are supplied with European
ammonia chillers. Pressure Equipment Directive (PED) approval. Other
All ChillPAC screw compressor versions are fitted with approvals are available on request.
variable-speed drive as standard. All ChillPAC screw
compressor versions are supplied with variable-speed
drive as standard.
ChillPAC 133 T-C 302 346 110 158 27 4500 3600 1150 1850 75
ChillPAC 133 M-C 312 358 114 129 27 4500 3600 1150 1850 75
ChillPAC 133 N-C* 364 420 133 152 31 5500 4800 1150 1850 76
ChillPAC 159 M-C** 542 724 198 207 48 6500 4800 1150 1850 77
PUBL-5646