Beruflich Dokumente
Kultur Dokumente
Features : Specifications :
• Featuring compact, light weight Order No. PQ0000004
construction for balance one-hand operation
Voltage AC 220V
and used for straight-line, curve, circle and
bevel welding edge and free-hand cutting. Speed 100-1000mm/min
• The constant running in any Cutting Thick 5-100mm
operation by the adopted variable Register Bevel Cutting 45°
obstains uniform cutting surfaces.
Weight Body 7.1kgs, Rail 3.2kgs
2
GAS WELDING AND CUTTING MACHINE
VIC-22 Automatic Shape Cutting Machine
Specifications :
Benefits :
• High precision in cutting with Order No. PQ0000013
smooth surface Voltage AC 220V
• Especially for batch producing Speed 100-1000mm/min
of components in same pattern
Cutting Thick 3-100mm
• Sutable for field work
• Various kinds of part can be cut Circle Cutting (Standard) 30-700mm
as per pattern Circle Cutting (Using Attachment) 600-1700mm
• Speed system is adjusted by Cutting Accuracy ±0.5mm
integrated circuit, keeping
running steadily Magnetic Roller Diameter 10mm
Weight 33kgs
VIC-65E Manual Operation Pipe Cutting Machine VIC-66 & VIC-67 Automatic Pipe Cutting Machine
Specifications : Specifications :
Order No. PQ0000014 PQ0000015
Order No.
Pipe Diameter 100-600mm PQ0000105
(Standard) Pipe Diameter 150-600mm
Cutting Thick 5-50mm Cutting Thick 5-50mm
Edge Shape I or V Edge Shape I or V
Bevel Angle Up to 45° Bevel Angle Up to 45°
Weight 9kgs Weight 14kgs
Feature : Feature :
4 wheel type manual pipe cutting 4 wheel type automatic pipe
machine with chain. cutting machine with chain.
Our “New Chiyo-Pack” Portable welding/cutting station has 3.6 liter Oxygen
& acetylene cilinders and allows 1.5 hours for gas welding and 1 hour for
cutting operation. Size: 730mm (H)x250mm(W)x215mm(D), weight : 30kgs
Specifications :
Cutting Range(mm) Rail Weight
Type
Web Flange Length (kg)
3
WELDING TORCH
Glitter Oxy-acetylene Welding Torches
Benefits :
• Aluminium die-casting grip is easy to handle for operator.
• Stainless steel made torch-tubes is lead long service life.
• Special O-ring in the injector made a perfect gas sealing.
• Tight seating designed valve spindle is legalized leak-free.
• New designed valve spindle is easy to replace.
Specifications :
Length Weight Welding plate Pressure (kgf/cm2)
Order No. Type Standard tips (no. orifice ø mm) thickness (mm)
(mm) (g) Oxygen Acetylene
No. 1 2 3 4 5
CH0000196 Tiny-00 370 500 0.1~0.7 1.5 0.15V
Orifice ømm 0.4 0.5 0.6 0.7 0.8
No. 1 2 3 4 5
CH0000197 Small 395 520 Orifice ømm 0.7 0.8 0.9 1.0 1.2 0.5~2.0 2.0 0.2
No. 1 2 3 4 5
CH0000198 Medium 435 530 1.5~5.0 3.0 0.3
Orifice ømm 1.2 1.3 1.4 1.5 1.6
No. 1 2 3 4 5
CH0000199 Large-A 600 750 2.3~10.0 3.0~4.0 0.3~0.4
Orifice ømm 1.4 1.5 1.6 1.8 2.0
No. 1 2 3 4 5
CH0000474 Large-B 650 770 10.0~40.0 5.0 0.5
Orifice ømm 2.6 2.8 3.0 3.2 3.4
CUTTING TORCH
Gutter Hand Cutting Torch
Specifications :
For Oxy Acetylene or Oxy Propane Pressure (kgf/cm2)
Length Weight Orifice Thickness
Type Tip No.
(mm) (g) (ømm) To be cut (mm) Oxygen Fuel Gas
1 0.7 3~7
Medium 460 680 2 0.9 5~15 2.5 0.25
3 1.1 10~20
1 1.0 5~15
Large-A 525 890 2 1.3 15~30 3.0 0.3
3 1.6 25~50
Pressure (Kgf/cm2) Gas Consumption(L/min) CH0000362 A8 Cutting Tip Strong 8 ACT No.5
Thickness Cutting
No. Orifice CH0000476 A8 Cutting Tip Strong 8 ACT No.6
To be cut Speed Jet- Pre-Oxy Pre-Gas
Size (ø mm)
(mm) (mm/min) Oxygen Gas
Oxy A-8 P-8 A-8 P-8 CH0000130 P8 Cutting Tip Strong 8 LPG No.1
1 0.7 3-7 600-700 2.0 0.2 650 285 1200 240 320 CH0000131 P8 Cutting Tip Strong 8 LPG No.2
2 0.9 5-15 500-600 2.0 0.2 1050 310 1200 280 320
CH0000132 P8 Cutting Tip Strong 8 LPG No.3
3 1.1 10-20 400-500 2.5 0.25 1900 375 1425 340 380
CH0000133 P8 Cutting Tip Strong 8 LPG No.4
4 1.3 15-30 350-400 2.5 0.25 2600 400 1425 360 380
5 1.6 25-50 300-350 3.0 0.3 4500 500 2000 450 500 CH0000134 P8 Cutting Tip Strong 8 LPG No.5
6 1.9 40-80 250-300 3.0 0.3 6500 500 2000 450 500 CH0000135 P8 Cutting Tip Strong 8 LPG No.6
4
CUTTING TORCH
Strong-25 Heavy Duty Hand Cutting Torch
Strong-25 Order No. Description
CH0000224 Cutting Torch Only Strong 25 L=550mm
CH0000225 Cutting Torch Only Strong 25 L=800mm
CH0000226 Cutting Torch Only Strong 25 L=1000mm
CH0000227 Cutting Torch Only Strong 25 L=1500mm
CH0000100 A3800 Cutting Tip Strong 25 ACT No.00
CH0000101 A3800 Cutting Tip Strong 25 ACT No.0
CH0000102 A3800 Cutting Tip Strong 25 ACT No.1
Benefit : CH0000103 A3800 Cutting Tip Strong 25 ACT No.2
Covering a range of metal thickness up to 300mm (12”) CH0000104 A3800 Cutting Tip Strong 25 ACT No.3
Specifications : CH0000105 A3800 Cutting Tip Strong 25 ACT No.4
CH0000106 A3800 Cutting Tip Strong 25 ACT No.5
Cutting Pressure (Kgf/
Thickness Gas Consumption(L/min) CH0000107 A3800 Cutting Tip Strong 25 ACT No.6
No. Orifice Speed cm2)
To be cut CH0000108 A3800 Cutting Tip Strong 25 ACT No.7
Size (ø mm) (mm/ Jet- Pre-Oxy Pre-Gas
(mm) Oxygen Gas
min.) Oxy A-3800 P-3500 A-3800 P-3500 CH0000109 A3800 Cutting Tip Strong 25 ACT No.8
00 0.8 3-5 700-660 2.0 0.2 850 410 1200 370 300 CH0000136 P3500 Cutting Tip Strong 25 LPG No.00
0 1.0 5-10 660-550 2.0 0.2 1300 410 1200 370 300 CH0000137 P3500 Cutting Tip Strong 25 LPG No.0
1 1.2 10-20 550-490 3.0 0.3 2500 480 1400 430 350 CH0000138 P3500 Cutting Tip Strong 25 LPG No.1
CH0000139 P3500 Cutting Tip Strong 25 LPG No.2
2 1.4 15-30 490-400 3.0 0.3 3450 480 1400 430 350
CH0000140 P3500 Cutting Tip Strong 25 LPG No.3
3 1.6 25-50 400-350 3.0 0.3 4500 480 1400 430 350
CH0000141 P3500 Cutting Tip Strong 25 LPG No.4
4 1.9 40-80 350-320 4.0 0.4 8000 550 2200 500 550
CH0000142 P3500 Cutting Tip Strong 25 LPG No.5
5 2.3 60-150 320-200 4.0 0.4 11000 690 2200 630 550
CH0000143 P3500 Cutting Tip Strong 25 LPG No.6
6 2.7 120-200 200-150 4.0 0.4 16000 770 2200 700 550
7 3.0 150-250 150-80 0.5 0.5 24000 1060 3400 960 850 CH0000144 P3500 Cutting Tip Strong 25 LPG No.7
8 3.4 200-300 80-45 0.5 0.5 30000 1060 3400 960 850 CH0000145 P3500 Cutting Tip Strong 25 LPG No.8
HEATING TORCH
Oxy-Propane Heating Torch
CH-416 Model 64 Large-A Torch CH-417 Model 65 Large-B Torch
Specifications : Specifications :
Tip Orifice Range Pressure (kgf/cm2) Tip Orifice Range Pressure (kgf/cm2)
Order No. Tip No. Order No. Tip No.
(Ømm) (mm) Oxygen Propane (Ømm) (mm) Oxygen Propane
CH0000403 600 2.0 5.0~6.5 4.0 0.4 CH0000421 2.000 3.0 10~20 5.0 0.5
CH0000564 800 2.2 6.5~8.0 4.0 0.4 CH0000422 3.000 3.4 20~30 5.0 0.5
CH0000420 1.000 2.4 8.0~10.0 4.0 0.4 CH0000423 4.000 3.8 30~40 5.0 0.5
Specifications :
5
BURNER TORCH
Propane Burners
For Industries Specifications :
Model 69 Tiny Torch
Orifice X Propane
Length
Order No. Model Type Tip end Dia. Pressure
Model 70 Small Torch (mm)
(ø mm) (kgf/cm2)
CH0000211 69 Light Duty 0.8 X 20 0.3 445
Model 71 Medium Torch
CH0000212 70 Light Duty 0.9 X 30 0.4 650
CH0000213 71 Medium Duty 1.1 X 40 0.5 850
Model 72 Large Torch CH0000214 72 Heavy Duty 1.4 X 50 0.6 900
FLASHBACK ARRESTOR
Save-Point Flashback Arrestors for Regulator
For Regulator for Acetylene, LPG, Oxygen
Specifications :
Order No. CH0000005 CH0000334
Type SA-2 SO-30
Application Acet.LPG Oxygen
Working Pressure (Kgf/cm2) 1.3 10
Flowing Capacity (Nm3/h) 2 30
Setting Position Regulator End Regulator End
Inlet Connection M16 P1.5(L)F M16 P1.5(R)F
Outlet Connection M16 P1.5(L)M M16 P1.5(R)M
Overall Length (mm) 76 76
Weight (g) 205 210
"SFST-02, SFG3-02" Flash-back Arrestors for Scarfing Torch for Oxygen Us Only
For Scarfing Torch for Oxygen us Only
6
FLASHBACK ARRESTOR
"Save-Point-G" Flashback Arrestor
For Regulator for Acetylene, LPG, Oxygen SGS-50A (LPG)
SGS-25A (ACETYLENE)
SGS-25A (LPG)
SGS-20A (LPG)
Specifications :
Order No. CH0000512 CH0000513 CH0000514 CH0000515 CH0000516 CH0000517 CH0000518 CH0000519
Types SGS-20A SGS-20A SGS-25A SGS-25A SGS-50A CY-OX-15A SCS-OX-20A SCS-OX-25A
Application ACETYLENE LPG ACETYLENE LPG LPG Oxygen Oxygen Oxygen
Working Pressure (kgf/cm2) 1.3 1.5 1.3 1.5 2 2 7 10
Flowing Capacity (Nm3/h) 15 30 60 30 60 150
Setting Position Large-Flow Distribution Line, Manifold End
Inlet Connection 3/4”PT(F) 1”PT(F) 2”PT(F) 1/2”PT(F) 3/4”PT(F) 1”PT(F)
Outlet Connection 3/4”PT(F) 1”PT(F) 2”PT(F) 1/2”PT(F) 3/4”PT(F) 1”PT(F)
Over Length (mm) 219 378 330 465 227 313
Weight (g) 6.5 31 13 30 3 12 12
Specifications :
REGULATOR
New Aster Gas Regulator
Specifications :
Applicable Gas Acetylene/ Oxygen/Nitrogen Hydrogen/Helium
Propane Propane
Acetylene
Inlet Pressure Max. 25kgf/cm2 Max. 165kgf/cm2 Max. 165kgf/cm2
Delivery Pressure 0.2-1.5kgf/cm2 2-15kgf/cm2 2-15kgf/cm2
Standard Flow 5Nm3/H (at 0.5 35Nm3/H (at 5 kgf/ 70Nm3/H (at 5 kgf/
Rate kgf/cm2) cm2) cm2)
Maximum Flow 11Nm3/H 3
100Nm /H 200Nm3/H
Rate
Hydrogen/Helium Inlet Pressure 0-25kgf/cm2 0-250kgf/cm2 0-250kgf/cm2
Oxygen/Nitrogen
Gauge (350lb/in2) (3500lb/in2) (3500lb/in2)
Order No. Description Delivery Pressure 0-3kgf/cm2 0-25kgf/cm2 0-25kgf/cm2
CH0000037 Gas Regulator New Aster Acetylene Gauge (40lb/in2) (350lb/in2) (350lb/in2)
CH0000063 Gas Regulator New Aster Lpg Inlet Connection JIS, BS, CGA, DIN JIS, BS, CGA, DIN JIS, BS, CGA, DIN
CH0000071 Gas Regulator New Aster Oxygen
Outlet Connection M16 X M16 X M16 X P1.5(L)+hose
CH0000070 Gas Regulator New Aster Nitrogen
P1.5(L)+hose P1.5(R)+hose nipple
CH0000066 Gas Regulator New Aster Hydrogen nipple nipple
CH0000477 Gas Regulator New Aster Helium Weight 1080g 1180g 1080g
7
REGULATOR
Victory Gas Regulator
High-Precision Regulator
For Laboratory, Inert Gas Supply, Shielded Arc Welding
Specifications :
Type GHN-1 GHN-2 GHN-3
Applicable Gases Co2
Body Material Chrome plated die forged brass
Inlet P. (kgf/cm2) 165
Delivery P. (kgf/cm2) 1~6 1.5 1~6
GHN-1 GHN-2 GHN-3 Max. Flow Rate (Nl/min) 100 50 100
Features :
Flowmeter (Nl/min) 2~25 2~25 -
• Stainless-steel made diaphragm is used for Helium & Hydrogen Gases.
• Stainless-steel made body & parts are also available as “SS” models. Order No. Description
Benefit : CH0000051 GH1 Precision No Heater CO2, Cga320 Inlet Connection
GH Series single stage regulators are designed for economy and popular CH0000052 GH2 Precison No Heater CO2
applications. CH0000478 GH3 Precison No Heater CO2
8
REGULATOR
Econo Dial
Shielding Gas Saving Regulator with Dial Flowmeter
In shielding gas feed method, normally we are using conventional pressure regulators and
ving flowmeters in TIG, MIG and CO2 Arc Welding, but in this method, a much volume of waste-
g gas sa ible !
it io n of shieldin 0% saving poss ful gas is discharged in a few seconds of at start of welding. In addition to poor efficiency, it
n ti c e d p rox . 4
Authe es) ap
DIAL seri adversely affects the welding surfaces and may spoil welding qualities.
(ECONO
“ECONO-DIAL” has been developed to minimize discharge of wasteful gas. It keeps gas flow
at constant rate as from start of welding and assures smooth arc start and energy saving
without causing deterioration of welding qualities
Argon
Cylinder Dial Type Gas Economizer
Regulator Hose / Torch
Flowmeter “Econo-Flow”
Minimum
Max. 150 Fixed pressure Accurate Demanded
kgf/cm2 3kgf/cm2 Flow Rate Pressure
Flow Rate
CO2
Ar
AC-100/200V
For mounting cyclinder For mounting pipeline outlet
Transformer
Welding Torch
9
REGULATOR
● Economizing Test
Comparing the “ECONO-DIAL” with an ordinary flowmeter regulator in the following testing conditions, the merit table
shows about 22 to 62% of shielding gas have been saved in 10 seconds at the start of welding
● Testing Conditions
1. Time of Welding : 10Seconds
2. Length of Welding Cable : 10meters with torch
3. Delivery Pressure : 3kgf/cm2
4. Hose Inside Diameters : 1/4” (6.35mm)
● Merit Table
Flowmeter set value at Rubber hose length Consumptions Economization
Kinds of regulator
welding start ( ℓ / min.) ( meter ) ( cc /10 sec. ) ( cc /10 sec. )
Ar welding Ordinary Type w / o Econo- 1.910
3 flow 1030 ( 53.9 % )
Econo-Dial 880
5 Ordinary Type w / o Econo- 2.390
10 flow 1494 ( 62.5% )
Econo-Dial 896
ordinary Type w / o 2.190
3 Econo- flow 600 ( 27.4% )
Econo-Dial 1.590
10
Ordinary Type w / o Econo- 2.546
10 flow 875 ( 34% )
Econo-Dial 1.671
CO2 Welding Ordinary Type w / o Econo- 3.283 933 ( 28% )
10 flow
Econo-Dial 2.350
15 Ordinary Type w / o Econo- 3.750 1187 ( 31% )
20 flow
Econo-Dial 2.563
Ordinary Type w / o Econo- 4.050 905 ( 22.3% )
10 flow
Econo-Dial 3.145
20 Ordinary Type w / o Econo- 4.440 1135 ( 25.5% )
20 flow
Econo-Dial 3.305
Shape
3~15ℓ/min 3~15ℓ/min
6~30ℓ/min
Low Range 6~30ℓ/min 6~30ℓ/min
10~50ℓ/min
10~50ℓ/min 10~50ℓ/min
Inlet J.I.S, B.S, CGA, D.I.N J.I.S, W22 M14 or ¾-16 UNF NUT
Outlet J.I.S M12P1 with ¼ Hose nipple
Weight 2.1kg 2.6kg 1.3kg 1.1kg
10
COMPACT TYPE GAS MIXER
2MD-100 2MF-100
● Outline : ● Outline :
This compact type gas mixer makes more stable mixed gas by using
hi-precision dial-type flow-meter and hi-precision gas- mixer. This compact type gas mixer makes a stable mixed gas by using float type
flow -meter and mixer
Features :
1. Because of dial type flow meters are installed, the delivery flow rate Features :
1. Because of using an original designed gas mixer is installed, the
is a stable and a accuracy
delivery gas flow is accurately controlled at ±ed 2.5% to 5% of a desired
2. The delivery gas flow rate is accurately controlled by an original
rate
designed gas mixer 2. The delivery Presured is fixed at 3kgf/cm2 3 by using a built-in
3. No reverse flow does occur by using a check valve regulator
4. For you optional use, the mixer has two outlets, in front and reverse side 3. No reverse flow does occur by using a check valve
5. The minimize compact designed mixer is easy for carrying 4. The minimize compact designed mixer is easy for carrying
Specifications : Specifications :
Order No. CH0000001 Order No. CH0000002
Type 2 MD-100 Type 2 MF-100
Applicable Gas Argon, CO2, Air, Nitrogen, Applicable Gas Argon and CO2
Helium, Hydrogen
Inlet Pressure 4 ~ 10kg/cm2
Inlet Pressure 4 ~ 10kg/cm 2
Adjusting Pressure 3kgf/cm2
Adjusting Pressure 3kgf/cm 2
Maximum Flow-Rate 50Nℓ/min (both AR. CO2)
Maximum Flow-Rate Max. 100Nℓ/min.
Argon 25Nℓ/min. or 50Nℓ/min.
50 + 50Nℓ/min CO2 25Nℓ/min. or 5 Nℓ/min.
Flowmeter
Flowmeter 30 + 30Nℓ/min 15+15Nℓ/min.
15 + 15Nℓ/min. Size 200(W)x220(H)x230(L)mm
Size 300(W)x180(H)x160(L)mm Weight Approx. 5kg
Weight Approx. 5kg
CO2 VAPORIZER
● Outline :
Our “CVR” type CO2 Vaporizers change liquid CO2 in cylinder, tank or container to CO2 gas by using electric heaters, steam/hot water and supply stability
Features :
1. Our original WATER LEVEL WARNING UNIT is installed in the unit, the heaters are not burned in a
case of no water
2. The compact design body use only small installation space and proof for rain 2MF-100
Specifications :
CH0000526 Cylinder Tank Container
Design
120kgf/cm2 30kgf/cm2 35kgf/cm2
Pressure
Working Inlet (P1) 35-100kgf/cm2 18-25kgf/cm2 18-30kgf/cm2
Pressure Delivery (P2) 2-6kg/cm2
Pressure 0-200kgf/cm2 0-50kgf/cm2
Gauge 0-10kgf/cm2
Safety Valve 120kgf/cm2 28kgf/cm2 35kgf/cm2
Size
Vaporizing Heater Inlet Water Weight
Type (mm)
Volume (kg/h) Capacity (kw) Nipple (liter) (kg)
(W) X (D) X (H)
CVR-40 40 5 400x400x825 7 70
CVR-60 60 8 40 120
600x500x1100
CVR-100 100 10 16mm 125
CVR-150 150 15 80 205
600x600x1600
CVR-200 200 20 210
CVR-300 300 30 22mm 120 275
700x700x1600
CVR-400 400 40 290
11
GAS MANIFOLD SYSTEM
1. Single-Row ( Wall type ) Manifold ● Part Informations
Applicable for O2, N2, Ar, H2, C2H2, He, CO2, etc
Parts Remark
Pedestal Steel L75 X 40
Cylinder Holder Steel L50 X 50
Valve mounting frame Steel L50 X 50
Chains SS41
Pigital PH-1
L-pipe UN-L
S-pipe UN-S
3-Way valve KV-250-T
Shut-off valve KV-250-CIS
T-pipe UN-T
Stainer FB-22
Pressure Regulator GS-140
Stop nut UN-PN
Nut W22 M14
Setting bolt M10-L10
Setting bolt M8-L15
● Dimensions ● Single-row type for Acetylene cylinders ANTI-FREEZING HEATER for non-syphon CO2
cylinders
Cylinder A B C D E Cylinder A B C D E
2x2 1400 1300 1000 600 1 2x2 1400 1200 600 250 1
3x3 2000 - - - 2 3x3 2000 - - - 2
4x4 2600 - - - 3 4x4 2600 - - - 3
5x5 3200 - - - 4 5x5 3200 - - - 4
6x6 3800 - - - 5 6x6 3800 - - - 5
2. Double-Row Manifold
● Part Informations
Parts Remark
Pedestal Steel L75 X 40
Cylinder Holder Steel L50 X 50
Valve mounting frame Steel L50 X 50
Chains SS41
Pigital PH-1
L-pipe UN-L
S-pipe UN-S
3-Way valve KV-250-T
Shut-off valve KV-250-CIS
● Dimensions
Double-row type forO2, N2Ar, H2, He, ● Double-row type for O2, N2Ar, H2, He, CO2, T-pipe UN-T
CO2, Cylinders Cylinders Stainer FB-22
Cylinder A B C D E Cylinder A B C D E Pressure Regulator GS-140
2x2 600 1300 1000 600 1 2x2 600 1300 1000 600 1 Stop nut UN-PN
3x3 900 - - - 2 3x3 900 - - - 2 Nut W22 M14
4x4 1200 - - - 3 4x4 1200 - - - 3 Setting bolt M10-L10
5x5 1500 - - - 4 5x5 1500 - - - 4 Setting bolt M8-L15
6x6 1800 - - - 5 6x6 1800 - - - 5 Steel Plate SS41
12
STATION FLASHBACK ARRESTOR WATER-SEALED SAFETY UNIT FOR FLAMMABLE GAS
● Types
DSS-40
DSS-60
DSS-100
DSS-5 DSS-10 DSS-10 40-515
210 255 323 60-530
100-800
100-1370
100-1370
60-1155
60-1155
40-180
40-180
590
460
800
800
370
370
● Types
● Installations
Welding Operators
Safety Unit
13
SEMI - AUTOMATIC CHANGE - OVER SYSTEM
● Function
At the intermediate of two separated cylinder banks, the change-over system switches when gas is plated in on cylinder
bank to the other, allowing cylinder replacement with uninterrupted gas servis.
Outlet valve
Order No. CH0000529 CH0000530
P3 Delivery pressure
Delivery pressure adjusting handle Types CH-100 EXS-100
regulator Application For normal & standar gases For high purity gases
Various kinds of gas,
Fluid O2, N2, Ar, H2, He, CO2, etc
except corrosive gases
Change-over Change-over
Inlet pressure (P1) Max. 165kgf/cm2
regulator P1 P1 Handle
Change-over pressure (P2) Around 10kgf/cm2
Delivery pressure (P3) 1 ~ 6kgf/ m2
Normal flow rate 50Nℓ/min.
A line B line Inlet pressure gauge
0 ~ 250kgf/cm2
Range (2 pcs)
Delivery pressure gauge
Pigtail 0 ~ 10kgf/cm2 76cm Hg ~ 10kgf/cm2
Range (1 pcs)
Shut-off
valves Inlet connection W22 – 14 ( Male ) Half-union ¼ “
Outlet connection PT ¼ ( Female ) Half-union ¼ “
Material (wated Parts) C3771B Diaphragm SUS316 Diaphragm
Weight (incl.panel) 6.5kgs 5.8kgs
● Selection Guide
Application Panel-Set Pedestal-Set Neck-Valve Set
For Normal MCH-100 A Type ( 1 x 1 ) MCH-100AN Type ( 1 x 1 )
CH-100
Fpr Standar Gas MCH-100 B Type ( 1 x 1 ) MCH-100BN Type ( 1 x 1 )
For Hi-Purity Gas EXS-100 MEXS-100 Type ( 1 x 1 ) MEXS-100N Type ( 1 x 1 )
* 2x2 or more cylinder types are also avaible
120
200
200 150
250
200
300 250
300
200
200
Pedestal
1550
Pedestal
1550
1300
Pedestal
600
600 600
14
● Part Name ● Contructions Out
LC-140 (BOX SET) Inlet Pressure Gauge (L) Inlet Pressure Gauge (R)
Outlet Delivery
Delivery Pressure
Setting Hole Pressure
A
P1A P3 P1B B
Gauge Left-Line Right Line
Left-Line Inlet Right-Line Inlet
Delivery
Pressure Gauge
Change-Over
Inlet Pressure Regulator
Inlet Pressure Gauge (Right-Line)
Change-Over
Gauge (Left-Line)
Lever
Change-Over Lever
Change-Over P2 PS
Pressure Swicth
Change-Over Pressure Gauge
Pressure Gauge Pressure Switch
Specifications :
Applicable Gas O2, N2, Ar, Air, etc
Inlet Pressure (P1) Max. 165kgf/cm2
Secondary Pressure ( P2 ) A : Pre-set side 10kgf/cm2
( Change-over Pressure ) B : Variable side kgf/cm2
Delivery Pressure ( P3 ) 1 ~ 7kgf/cm2
Standard Flow-rate 50Nm3/H (max.)
Inlet Pressure Gauge 0-250kgf/cm2
Secondary Pressure Gauge 0-15kgf/cm2
Delivery Pressure Gauge 0-15kgf/cm2
Pressure Switch 3kgf/cm2 Set
Inlet Connection W22 M14 Male
Outlet Connection W22 M14 Male
Size 750(H)x454(W)x305(D)mm
Net Weight 42kg(Body Only)
● Features
- Easy ignition with the pilot burner leads reducing the wast of gas and time.
- No need to adjust the flame when re-igniting and can to work immediately with always unifrom flame.
- Can perfrom unifrom work everytime with always unifrom flame .
- Only by hanging the torch on the lever, gas flow is intercepted and the flame goes out automatically.
- Designed for both acetylene and propane gases, (however, please use the torch, tips and hose of exclusive use).
By mounting leg, can attached on the work stand directly.
Specifications :
INLET / OUTLET CONNECTION
Pressure
GAS Joint Hose Weight
(kgf/cm)
Screw(mm) Nipple(mm)
Oxygen 1~7 M16 X 1.5 ( RH ) Ф 5, 6.3, 8
1,284g ( Fixing bolt
Acetylene LPG 0.2 ~ 1 M16 X 1.5 ( LH ) Ф 5, 6.3, 8, 10 are not included )
15
CHIYOCOCK
One Touch Hose Coupling
For an Instant Joining or Detaching of Welding Equipment
Ace Regulator
CP-TO CS-TO CS-HO CS-TO CS-HO CS-RO
Chiyo-cock
Hose Hose
Torch
Hose Hose
Chiyo-cock CP-TG CS-TG CP-HG CS-TG CP-HG CS-RG
Ace Regulator
kls/p&a.245/2k/ch.6/hen.uni/11.14
16