Beruflich Dokumente
Kultur Dokumente
MN5000-series
• E-LSP and L-LSP support (control frame) transmission
• Per platform Label space support • POS: Line timing and SSM (S1 byte) transmission
• Bi-directional and Uni-directional MPLS-TP trail • Free run: ±4.6ppm (ITU G.813)
• DiffServ support • Holdover: ±0.05ppm (Better than ITU G.813) within 24h
2 service levels for TDM (E1/T1, SDH/SONET), • Sync signal for 3G Base Station: External timing output
4 service levels for ATM, • Traceable STM-1 ATM interface as line timing source
8 service levels for Ethernet • Provide 1pps+tod time input and output (MN5100)
• MPLS OAM including protection switching
NETWORK MANAGEMENT
• VCCV, LSP Ping/TraceRoute
• EMS/SNMS manual control of PW/LSP setup/release SpectralWave MN9200, LCT (Local Craft Terminal)
Hardware Redundancy Power input Power unit, OAM/Clock/Switch fabric, E1/T1 card protection
Dimensions (H x W x D mm) 44.5 x 440 x 245 (1U) 133 x 440 x 410 (3U) 320 x 440 x 410 (7U)
Weight 4kg (full) 21kg (full) 41kg (full)
Temperature 0℃ to 50 ℃ 5 ℃ to 40 ℃
Humidity (non-condensing) 5% to 95% 5% to 85%
Power Supply
Maximum Power Consumption 50W (fully loaded)
-48V DC
300W (fully loaded) 700W (fully loaded) MPLS-TP
! Safety Precautions *Before installing, connection or using this product, be sure to carefully read and observe the cautionary
and prohibited matters provided in the instruction manual.
PACKET TRANSPORT SOLUTION
FOR MULTI-SERVICES
・The company names and product names given in this catalog are trademarks or registered trademarks of the respective companies.
・The configuration or specifications are subject to change without prior notice due to continual improvements.
®
Published by NEC Corporation Global Network Division
http://www.nec.com/
© 2009 NEC Corporation NEC and the NEC logo are registered trademarks of NEC Corporation. Cat.No. F02-10010004E
MN5000-series
Simple Operation
●
●
Single powerful E2E management system for 2G and 3G ●
VPN services for enterprise customers; E-Line/E-LAN/E-Tree
transport network ●
Advanced QoS and protection guarantee SLAs.
●
Forward-looking approach for All-IP evolution with cost saving ●
User friendly management system enables quicker service delivery.
C3
Cell Site Mobile Backhaul Mobile Core Network A1 MN5000 B4
MPLS-TP
MPLS-TP Metro
PRODUCT OVERVIEW APPLICATIONS
2G BTS B1
BSC
Operator’s Metro
Circuit Switching
T1/E1 MN5000 Backbone Network
(Copper) STM-1
3G NodeB IP/MPLS B2
The MN5000 is a new packet transport product based on pseudowire The MN5000 suits for Metro Ethernet service, Mobile Backhaul, Any traffic over City-1 B3 GE/10GE
Core
over MPLS-TP technology; it has been developed to overcome the DSLAM & xPON Aggregation, SDH network migration, and so on. MPLS-TP ATM
RNC
nology, the MN5000 is the key fact for today’s metro network carriers
MN5000 KEY FEATURES 3G NodeB or
LTE eNodeB
Ethernet
(Fiber,GPON,xDSL)
GbE/10GbE Network
C1
Metro
C2 B5 A2
MN5000
and ser vices providers. Equipped with enhanced data ser vice
processing capability and powerful network management function, Multi-services transport with path management
the MN5000 can provide all-round network solutions at the access
layer and aggregation layer of a Metropolitan Area Network (MAN),
The MN5000 supports Ethernet over MPLS, Circuit emulation over
NETWORK MANAGEMENT
MPLS and ATM over MPLS, and can carries TDM, ATM and Data
enormously reducing the operation cost. Operation cost is optimized traffic through managed path, over Pseudowire and LSP layer in
The MN9200 is a comprehensive Network Management System for
by both MN5000 and MN9200 because of simple and easy OAM of MPLS-TP network. ATM IMA is planned. Service Configuration and LSP/PW (Path) Provisioning
operating the MN5000, and features an integrated broad set of func-
Packet Transport Network. Uplink Pseudo Client Client The MN9200 provides all necessary service configuration tools of
Layer MPLS-TP Wire Layer Equipment
tions ready for the growing demands on packet transport system, and
provides an integrated network management visibility and control of LAN / WAN / ATM / PDH connection establishment.
PW-A MPLS MN9200 continuously evolves to support the state of the art on man-
●
All the services come from single network ATM
agement capabilities, meeting all the customer needs on packet trans- Fault and Alarm Monitoring
●
State art pure-packet architecture
Operation and Maintenance (OAM) Features port network.
The MN9200 supports advanced alarm monitoring functions such as
Ease of Operation
The MN50 0 0 suppor ts strong OAM features; MPLS - OAM, Key Functions of Management, Current Alarm Monitoring, History Alarm Statistics, LSP/PW/CE
●
User friendly GUI for all the standard operation Pseudowire OAM, SDH OAM, ATM OAM, and Ethernet OAM, useful Service alarm, Network Equipment (NE)/Board/Port alarm, Communi-
Operation and Maintenance
●
Minimal training of personnel, reuse of existing skill-set for connectivity verification, fast failure detection, tracing and so on. cation alarm, Clock alarm, External Environment alarm, and so on.
●
Simple Architecture (Connection oriented, Deterministic data plane) ● System resources
●
Static provisioning (plan for dynamic provisioning) Network Protection
●
Secure the network against unauthorized access
●
Standards based enhanced OAM (Advanced troubleshooting) ●
Resource inventory management
●
Powerful network management with End-to-End provisioning The MN5000 supports high speed protection less than 50ms. It ●
Simple analysis of network capacity
(Hides the complexity of MPLS protocol) ensures carrier grade continuous services.
● Network provisioning
●
Separated Control-plane and User-plane ●
Search, discover and activate NE, Physical/Digital Link
(Network stability behavior advantage) Quality of Services ●
Introduction of new NE without services interruption
●
Manage Linear Section Protect (LSP), Pseudowire (PW),
New Revenue Generating Services The MN5000 implements the latest QoS aware bandwidth control,
Customer edge equipment (CE), neighborhood information
queuing, policing and scheduling techniques. It supports MPLS
●
MEF 9 and 14 certified
based QoS for TDM, ATM and Ethernet Traffic based on E-LSP and ● Network operational status
●
Enables new enterprise services such as VPL, EVPL, TLS, and so on Performance Monitoring
L-LSP, and low latency real-time services as well as best-effort data ●
Help tools to provide service restoration and assurance against failure
●
Quick creation and activation of new services
ser vices with tunable per formance requirements. The MN5000
●
Performance data and analyzes on both table and graphical view
●
Supports VLAN and Multicast The MN9200 supports performance monitoring for ATM, PDH, SDH,
supports DiffServ with minimal adjustments to the MPLS and DiffServ Ethernet, Pseudowire and LSP, and also supports Graphical PM
Guaranteed SLAs architectures, and introduces traffic-management and congestion QoS Provisioning report and browsing manually and automatically.
avoidance mechanisms to condition and implement the different
●
MPLS and Carrier Ethernet based QoS The MN9200 supports powerful QoS provisioning mechanism. It is
Residential and Enterprise traffic can co-exist while guaranteeing class and drop precedence for traffic.
●
possible to create a guaranteed connection by each individual service
the SLAs. type within its corresponding layer (LSP, PW and CE).
Timing Synchronization In despite of its End-to-End (E2E) services QoS provisioning, the
Smooth Migration The MN5000 supports high performance Synchronization Distribution operator can manage each equipment individually for its services,
●
Co-existence with SDH Network over packet transport network, suits for mobile backhaul and so on. units and ports for implementation and/or troubleshooting.
●
Interoperability with existing IP/MPLS core