Beruflich Dokumente
Kultur Dokumente
APPENDIX 1-10
A Inputs
A.1 Design constraints
Pressure for reinforcement calculation P 81.717 bars
Temperature for internal pressure, Temp 121 °C
Design External Pressure, Pext 1.025 bars
Temperature for External Pressure, Tempex 121 °C
B.2 Required thickness of nozzle wall- Trn (internal pressure) Cl.App 1-1(a)(1)
where,
Ro=outside radius of nozzle 254 mm
D.1.3 Hence,
LR = 8t
Therefor,
D.1.4 = 480 mm
D.2 Limit of reinforcement along the nozzle wall projection outside vessel surface
= 143.247 mm
= 210 mm
= 624 mm
= 192.56 mm
= 143.247 mm
Where,
Nozzle inside radius Rn = 227.81 mm
Nominal thickness of nozzle
tn 50 mm
Nozzle projection from outside
Lpr1 150 mm
Thickness of the reinforcing pad
te 18 mm
Nominal wall thickness of
thinner portion
tn2 26.19 mm
Length of variable thickness
Lpr3 101 mm
= 1.824
= 126 cm2
= 71.623 cm2
161.000 mm
>= LH
D.3.3 Area contributed by shell inside the vessel wall, A 3
= 0.000 cm2
Where,
Effective length of nozzle wall 0
inside the vessel, L1 = mm
= 1.62 cm2
Where,
Inside diameter of nozzle dn = 455.62 mm
Inside diameter of shell Di = 1220 mm
Effective thickness near teff = 60 mm
nozzle opening
Weld leg length of outside
nozzle fllet weld L41 = 18 mm
Where,
Where,
Weld length of the inside
nozzle fillet weld L43 = 0 mm
Where,
AT
Total Area within the assumed
limits of reinforcement
AT = 238.663 cm2
= 610 mm
= 15802.73 kgf
D.5.2 Force from internal pressure in
shell fS
= 132158.93635 kgf
= 115796.64343 kgf
Where,
Internal design pressure P 81.717 bar
83.32845924 kg/cm2
Radius of nozzle opening along Rnc
the long chord
= 227.81 mm
= 108.42 N/mm2
= 83.11 N/mm2
= 138.15 N/mm2
Where,
Allowable stress of nozzle S = 92.1 N/mm2
Weld joint factor E = 1
= 84.452 bar
= 90.590163934 bar
= 3165.28 cm2
= 84.451785335 bar