Beruflich Dokumente
Kultur Dokumente
File
General 1
The Man-Machine Conversation (MMC) by 4034/4035 station enables modification of the parameters
of the different system elements.
NOTE :
- only a single 4034/4035 station can be in MMC at a given moment.
- simultaneous access to the MMC by station and by PC is impossible.
- By introducing a digital value (number of the station for example) or an alphanumeric value.
- By choosing one of the predefined values presented on the display using the soft keys.
- entering the code 70 (by default) or by using a key programmed with this code, or by pressing the
System
key (4035 station).
- choosing the session : 3 sessions are offered : INSTALLER ( INSTAL key), ADMINISTRATOR ( ADMIN key)
and OPERATOR ( OPERAT key). These different levels of access to the parameterizable features thus
enable modifications to be authorized to cleared people only.
- entering the password corresponding to the chosen session.
NOTE : * Only Installer and Administrator sessions are presented in this notice ; for the Operator ses
sion, refer to the Installation guide.
CONFIGURABLE FEATURES
All the features configurable in the Installer session are described in the different files contained in the
current guide. The features and sub-features available in the Administrator session are indicated by the
symbol A (Administrator) positioned beside the titles of the configurable elements.
Each feature has a diagram describing the entry procedure (in Installer session). The features which are
accessible by soft keys are indicated by :
- SUBSCR
soft key for moving through the MMC tree or for choosing a feature.
- CHOICE
giving access to the drop-down menu.
To quit the MMC session press the F F key (4034 station) or the key (4035 station). You will quit
the session automatically, 10 minutes after the last key has been pressed.
Alcatel 4200
MMC_STATION SECTION GENERAL
GENERAL COMMANDS
Touches dynamiques
Each time you need to enter a name or a label associated to a key or a feature, use the alphabetic
keypad. If the station does not have an alphabetic keypad, use the dialling keypad. To enter a letter,
press the key which has the required letter on it : once for the first letter, twice for the second and three
times for the third. To enter two consecutive letters on the same dialling key, press -> before entering
the second letter. Entering special characters :
- "space" : press 1
- "-" : press 1 twice
- "." : press 1 three times
- "#" : press #
- ":" : press # twice
- "=" : press # three times
- "*" : press *
- "+" : press * twice
- "/" : press * three times
- "0" to "9" : press #0 or #9
INSTALLER SUBSCR
CONFIGURATION OF THE STATIONS
session
COUNT
METERING COUNTERS
GROUPS GROUPS
Alcatel 4200
MMC_STATION SECTION GENERAL
1st page
TIMERA TIME RANGES