Der Ta eer R LS
AWS As.18 ER705-6
‘Approved by ABS, BY, DNY, GL, KR IR, WK, CWB, TOY, 5, HS, JS
(0% ars20% Cox, TU)
K-28 Mig wire is typically used for welding low to medium
strength low alloy steels. Available in kg, 5kg, 1skg spools and
2sokg and 300k Pail packs. This premium wire is suitable for
high-speed automatic and manual welding in all positions with
stable arc and low spatter generation. Flow quantity of shiel
{gas should be 15 to 20 1/ min in general. For best performance
Use a windscreen against wind and keep the distance between
tip and base metal within 6-15mm for 250AMP and under or
within 15 — asmm for a50AMP and over of welding current. Can
be used with mixed gases.
Typical chemical composition of all-weld-metal (%)
‘Shielding gas ¢ si Mn e s
coe 008 = 0s0 105 ote on
wvecon 0070820, gts O10
Typical mechanical properties of all-weld-metal
Shielang Gas ¥P 13. 1 charpy vote Lv
Wim? (kgm) Win? kgtine®) (5) J tag.) (29°)
coe, 450 (46) 580 (58) » ma)
‘As20%C02 480 (48) 500 59) 2 we)
Sizes available and recommended currents (AC or DC+)
Dain) 06 08 09 +1012 18
‘amp.F 40-150 40-180 50-200 70-250 100-380 200-550
Amp.
BOH 40100 40-120 50-120 50-150 50-100 120-300
PartNumbers 0.6mm Gsm 0.8mm 1mm 12mm 4.6mm
hg Spec KCasdioe. Kcassi
Sig Spooks KCmce KCmaI08 KC2BB00
Sig Spools KCZIOE KCasIoe KC28I0N KCZANIO KCI2 KCZEIIS