Considerations 1 1.1 Transmission Interconnections 1 1.1.1 Why We Need Transmission Interconnections 1 1.1.2 Opportunities for FACTS 2 1.2 Flow of Power in an AC System 3 1.2.1 Power Flow in Parallel Paths 4 1.2.2 Power Flow in Meshed System 4 1.3 What Limits the Loading Capability? 7 1.4 Power Flow and Dynamic Stability Considerations of a Transmission Interconnection 9 1.5 Relative Importance of Controllable Parameters 12 1.6 Basic Types of FACTS Controllers 13 1.6.1 Relative Importance of Different Types of Controllers 14 1.7 Brief Description and Definitions of FACTS Controllers 16 1.7.1 Shunt Connected Controllers 18 1.7.2 Series Connected Controllers 20 1.7.3 Combined Shunt and Series Connected Controllers 23 1.7.4 Other Controllers 24 1.8 Checklist of Possible Benefits from FACTS Technology 25 1.9 In Perspective: HVDC or FACTS 26
vii viii Contents
CHAPTER 2 Power Semiconductor Devices 37
2.1 Perspective on Power Devices 37 2.1.1 Types of High-Power Devices 40 2.2 Principal High-Power Device Characteristics and Requirements 41 2.2.1 Voltage and Current Ratings 41 2.2.2 Losses and Speed of Switching 42 2.2.3 Parameter Trade-Off of Devices 44 2.3 Power Device Material 45 2.4 Diode (Pn Junction) 46 2.5 Transistor 48 2.5.1 MOSFET 51 2.6 Thyristor (without Turn-Off Capability) 52 2.7 Gate Turn-Off Thyristor (GTO) 54 2.7.1 Turn-On and Turn-Off Process 56 2.8 MOS Turn-Off Thyristor (MTO) 58 2.9 Emitter Turn-Off Thyristor 60 2.10 Integrated Gate-Commutated Thyristor (GCT and IGCT) 61 2.11 Insulated Gate Bipolar Transistor (IGBT) 63 2.12 MOS-Controlled Thyristor (MCT) 64
CHAPTER 3 Voltage-Sourced Converters 67
3.1 Basic Concept of Voltage-Sourced Converters 67 3.2 Single-Phase Full-Wave Bridge Converter Operation 69 3.3 Single Phase-Leg Operation 72 3.4 Square-Wave Voltage Harmonics for a Single-Phase Bridge 73 3.5 Three-Phase Full-Wave Bridge Converter 74 3.5.1 Converter Operation 74 3.5.2 Fundamental and Harmonics for a Three-Phase Bridge Converter 77 3.6 Sequence of Valve Conduction Process in Each Phase-Leg 80 3.7 Transformer Connections for 12-Pulse Operation 83 3.8 24- and 48-Pulse Operation 85 3.9 Three-Level Voltage-Sourced Converter 87 3.9.1 Operation of Three-Level Converter 87 3.9.2 Fundamental and Harmonic Voltages for a Three-Level Converter 88 3.9.3 Three-Level Converter with Parallel Legs 91 3.10 Pulse-Width Modulation (PWM) Converter 91 3.11 Generalized Technique of Harmonic Elimination and Voltage Control 95 3.12 Converter Rating—General Comments 97 Contents ix
CHAPTER 4 Self- and Line-Commutated Current-Sourced
Converters 103 4.1 Basic Concept of Current-Sourced Converters 103 4.2 Three-Phase Full-Wave Diode Rectifier 106 4.3 Thyristor-Based Converter (With Gate Turn-On but Without Gate Turn-Off) 110 4.3.1 Rectifier Operation 110 4.3.2 Inverter Operation 113 4.3.3 Valve Voltage 116 4.3.4 Commutation Failures 118 4.3.5 AC Current Harmonics 120 4.3.6 DC Voltage Harmonics 126 4.4 Current-Sourced Converter with Turn-Off Devices (Current Stiff Converter) 129 4.5 Current-Sourced Versus Voltage-Sourced Converters 132
CHAPTER 5 Static Shunt Compensators: SVC
andSTATCOM 135 5.1 Objectives of Shunt Compensation 135 5.1.1 Midpoint Voltage Regulation for Line Segmentation 135 5.1.2 End of Line Voltage Support to Prevent Voltage Instability 138 5.1.3 Improvement of Transient Stability 138 5.1.4 Power Oscillation Damping 142 5.1.5 Summary of Compensator Requirements 143 5.2 Methods of Controllable Var Generation 144 5.2.1 Variable Impedance Type Static Var Generators 145 5.2.2 Switching Converter Type Var Generators 164 5.2.3 Hybrid Var Generators: Switching Converter with TSC and TCR 177 5.2.4 Summary of Static Var Generators 178 5.3 Static Var Compensators: SVC and STATCOM 179 5.3.1 The Regulation Slope 183 5.3.2 Transfer Function and Dynamic Performance 184 5.3.3 Transient Stability Enhancement and Power Oscillation Damping 188 5.3.4 Var Reserve (Operating Point) Control 193 5.3.5 Summary of Compensator Control 195 5.4 Comparison Between STATCOM and SVC 197 5.4.1 V-I and V-Q Characteristics 197 5.4.2 Transient Stability 199 5.4.3 Response Time 201 5.4.4 Capability to Exchange Real Power 201 5.4.5 Operation With Unbalanced AC System 202 5.4.6 Loss Versus Var Output Characteristic 204 5.4.7 Physical Size and Installation 204 5.4.8 Merits of Hybrid Compensator 205 5.5 Static Var Systems 205 X Contents
CHAPTER 6 Static Series Compensators: GCSC, TSSC, TCSC,
andSSSC 209 6.1 Objectives of Series Compensation 209 6.1.1 Concept of Series Capacitive Compensation 210 6.1.2 Voltage Stability 211 6.1.3 Improvement of Transient Stability 212 6.1.4 Power Oscillation Damping 213 6.1.5 Subsynchronous Oscillation Damping 214 6.1.6 Summary of Functional Requirements 215 6.1.7 Approaches to Controlled Series Compensation 216 6.2 Variable Impedance Type Series Compensators 216 6.2.1 GTO Thyristor-Controlled Series Capacitor (GCSC) 216 6.2.2 Thyristor-Switched Series Capacitor (TSSC) 223 6.2.3 Thyristor-Controlled Series Capacitor (TCSC) 225 6.2.4 Subsynchronous Characteristics 236 6.2.5 Basic Operating Control Schemes for GCSC, TSSC, and TCSC 239 6.3 Switching Converter Type Series Compensators 243 6.3.1 The Static Synchronous Series Compensator (SSSC) 244 6.3.2 Transmitted Power Versus Transmission Angle Characteristic 245 6.3.3 Control Range and VA Rating 248 6.3.4 Capability to Provide Real Power Compensation 250 6.3.5 Immunity to Subsynchronous Resonance 254 6.3.6 Internal Control 257 6.4 External (System) Control for Series Reactive Compensators 259 6.5 Summary of Characteristics and Features 261
CHAPTER 7 Static Voltage and Phase Angle Regulators: TCVR
andTCPAR 267 7.1 Objectives of Voltage and Phase Angle Regulators 267 7.1.1 Voltage and Phase Angle Regulation 269 7.1.2 Power Flow Control by Phase Angle Regulators 270 7.1.3 Real and Reactive Loop Power Flow Control 272 7.1.4 Improvement of Transient Stability with Phase Angle Regulators 274 7.1.5 Power Oscillation Damping with Phase Angle Regulators 276 7.1.6 Summary of Functional Requirements 277 7.2 Approaches to Thyristor-Controlled Voltage and Phase Angle Regulators (TCVRs and TCPARs) 277 7.2.1 Continuously Controllable Thyristor Tap Changers 280 7.2.2 Thyristor Tap Changer with Discrete Level Control 286 7.2.3 Thyristor Tap Changer Valve Rating Considerations 289 7.3 Switching Converter-Based Voltage and Phase Angle Regulators 290 7.4 Hybrid Phase Angle Regulators 293 Contents xi
CHAPTER 8 Combined Compensators: Unified Power
Flow Controller (UPFC) and Interline Power Flow Controller (IPFC) 297 8.1 Introduction 297 8.2 The Unified Power Flow Controller 299 8.2.1 Basic Operating Principles 300 8.2.2 Conventional Transmission Control Capabilities 301 8.2.3 Independent Real and Reactive Power Flow Control 305 8.2.4 Comparison of UPFC to Series Compensators and Phase Angle Regulators 308 8.2.5 Control Structure 315 8.2.6 Basic Control System for P and Q Control 319 8.2.7 Dynamic Performance 322 8.2.8 Hybrid Arrangements: UPFC with a Phase Shifting Transformer 329 8.3 The Interline Power Flow Controller (IPFC) 333 8.3.1 Basic Operating Principles and Characteristics 334 8.3.2 Control Structure 343 8.3.3 Computer Simulation 344 8.3.4 Practical and Application Considerations 346 8.4 Generalized and Multifunctional FACTS Controllers 348
CHAPTER 9 Special Purpose Facts Controllers: NGH-SSR