Beruflich Dokumente
Kultur Dokumente
Technical data 22
Copyright:
No part of this brochure may be reproduced without our prior permission.
We reserve the right to make changes without notification.
3
The ideal door
Hörmann steel folding doors
are particularly recommended
for buildings with low
headroom or where the statics
do not allow the roof to carry
an extra load. The type of fitting
required should already be
considered at the planning
stage.
External fitting:
the space-saving solution
One major advantage of
folding doors is that they can
also be fitted externally. This
means that the space inside
the building can be fully
utilised. No valuable space is
lost - neither at the sides,
above the lintel nor under the
ceiling. Also a particularly
good solution for security
reasons.
Reduced risk of collision
The door leaf packs parked at
either side are located well
within the driver’s field of vision.
Given sufficient sideroom, the
door leaf packs can also be Hörmann Steel Folding Doors Up To 14 m
parked in front of or behind the
wall, thereby allowing full use Wide. The Economic Solution
of the passage width.
Type-tested
4
A versatile appearance
from 3 to 12 leaves
Hörmann steel folding doors
are available up to 14 m wide
and 5 m high, with solid infill
throughout or incorporating
partial or maximum glazing.
Double-skinned thermally
insulated with a range of
interesting glazing options:
rectangular, circular, triangular
or diamond-shaped. Single-
skinned for unheated buildings
with ribbed, plain or raised
panel infills, with ventilation
louvres or as an open version
for on-site timber boarding.
All versions can be obtained
on request with a wicket door,
2-part traffic leaf or with
matching side door.
Highly robust thanks to steel. Low in maintenance due to very few wearing
parts. That’s why Hörmann steel folding doors are ideal for manually operated
applications, such as in building yards, vehicle depots and maintenance halls.
An efficient service
Our extensive service network
means that we are never far
away. When it comes to
inspections, maintenance and
repairs, this is a major
advantage.
Competent advice
Experienced specialists within our customer-oriented sales
organisation accompany you from the planning stage, through
technical clarification up to the final building inspection.
Complete working documentation is not only available in
printed form but is always accessible and up to date under
www.hoermann.com.
5
The Double-Skinned Folding Door
KSP With PUR Rigid Foam Core
Acoustic rating
R’˘, w, B = ca. 22 dB
RAL to choice on request.
Safety as standard!
High-grade EPDM multi-chamber
profiles on all vertical closing edges
provide perfect finger-trap protection
©
55 mm
Primer coating
6
CFC-
The Right Decision free
to protect the
For Maximum Thermal Insulation environment
Types of fitting
On the wall, opening inwards or outwards
In the opening, opening inwards or outwards
Sideroom/headroom
Door version with Door version with
wicket door with threshold square glazing and
Only 90 mm, with an opening angle of 90°
2-part traffic leaf
Thermal insulation (DIN EN 12428)
U = 1,65 W/m 2 K for a 5,2 x 3 m door without glazing
8
robust
e mely
r
Ext ruction
The Heavy-Weight Version t
cons
For Optimum Sound Insulation
Door versions (examples) Size range
Width up to 14000 mm
Height up to 5000 mm
Types of fitting
On the wall, opening inwards or outwards
In the opening, opening inwards or outwards
Sideroom/headroom
Door version Door version with
with wicket door square glazing and
Only 90 mm, with an opening angle of 90°
with/without threshold 2-part traffic leaf
Sound insulation (DIN EN 20140)
R’˘, w, B = approx. 24 dB
10
idual
ndiv ics
For i aesthet
With a Host of Infill Variations door
Matched to Your Application and Architecture
Door versions (examples) Size range
Width up to 14000 mm
Height up to 5000 mm
Types of fitting
On the wall, opening inwards or outwards
In the opening, opening inwards or outwards
Sideroom/headroom
Ribbed sheet steel infill Smooth sheet steel infill Ribbed sheet steel infill
with partial glazing, panes 1.5 mm thick with/without ventilation
Only 90 mm, with an opening angle of 90°
factory or site-fitted wicket door with threshold slots with 2-part traffic leaf
Wind pressure (DIN EN 12424)
Class 2
Safety regulations
It goes without saying that Hörmann
fire station folding doors meet the
safety regulations for vehicle
maintenance and repair ZH 1/454 and
the workplace ordinance ZH 1/525.
12
an dard ing
St open
The Doors for Emergencies: quick
Always Quick and Reliable
Fitted to the wall Fitted in the opening
min. 60
10
80 x 80
min. 170
160
80 x 80
min. 60
80 x 80
15
15
28 28
RAM = LH + 160
LDH = LH - 170
RAM = LH - 10
Outside Outside
350
80 x 80
Inside Inside
min. 170
195 LDB min. 3500
13
Folding Doors with Glazing:
Let the Light Shine In!
Rectangular glazing Square glazing Circular glazing
For KSP and KSM For KSP and KSM For KSP and KSM
Plastic or metal glazing frame, Graphite Glazing frame as for rectangular glazing. Enclosed within an EPDM clamping profile,
Black (based on RAL 9011) with EPDM Glazing size depends on the door leaf Graphite Black (based on RAL 9011) or
seals to both sides. Screwed from the width of approx. 350 x 350 mm up to paintable aluminium ring 500 mm Ø :
inside for security reasons. Glazing size 850 x 850 mm. with clear acrylic panes, 6 mm or with
depends on the door leaf width: clear acrylic double panels ,18 mm.
Standard sizes On-site glazing not possible.
473/523/573 x 773 (W x H)
Special sizes
Width dependent on the leaf width
Height up to max. of 1250 mm Depending on the type of pane you choose, you can decide whether
you want more or less light, visual contact or increased security.
On-site glazing
On request, also prepared for on-site glazing: Types KSP and KSM
up to 18 mm, type KSE up to 20 mm pane thickness.
14
Depending on the requirement profile or your individual wishes Hörman
folding doors and fast-opening fire station folding doors can be equipped
with the glazing types as shown
Acrylic double panes Polycrbonate panes Polycarbonate/ acrylic double panes Double-moulded unit ,16 mm
Crystal structure, 18 mm Clear glass, 6 mm Clear glass, 18 mm extremely sturdy panes
impact-resistant, burglar-retardant
15
Quality Features
KSP KSM of Double-Skinned Folding Doors
Transport and
site protection
Hörmann folding doors are packed to
ensure safe transportation and allow
the contents to be clearly visible.
Protectors on the underside and edges
facilitate transport from the building site
to the place of use.
16
Top track section with seal Heavy duty hinges Bottom threshold
The track section consists of a track, guide These zinc die-cast hinges are designed The doors are provided with a Z-section
rollers mounted on ball bearings, end for tough everyday use (it’s worth making angle as a guide rail which forms the bottom
stops and brackets. It is anchored to the a comparison). Plastic bushes make for threshold. The brush seal is easy to replace.
lintel together with the tubular frame and a smooth-running door. Applying an With an uninterrupted flat floor line, 3 and
ensures safe, smooth-running of the door. occasional drop of oil to the lubricating 4-leaf doors are also supplied without a
A lip seal (EPDM) provides reliable sealing nipple is the only maintenance required. threshold angle.
in the lintel area.
17
Quality Features
KSE of Single-Skinned Folding Doors
Transport and
site protection
Hörmann folding doors are packed to
ensure safe transportation and allow the
contents to be clearly visible. Protectors
on the underside and edges facilitate
transport from the building site to the
place of use.
18
Top track section with seal Heavy duty hinges Bottom threshold
The track section consists of a track, guide These zinc die-cast hinges are designed The doors are provided with a Z-section
rollers mounted on ball bearings, end for tough everyday use (it’s worth making angle as a guide rail which forms the lower
stops and brackets. It is anchored to the a comparison). Plastic bushes make for threshold. The brush seal is easy to replace.
lintel together with the tubular frame and a smooth-running door. Applying an With an uninterrupted flat floor line, 3 and
ensures safe, smooth-running of the door. occasional drop of oil to the lubricating 4-leaf doors are also supplied without a
A lip seal (EPDM) provides reliable sealing nipple is the only maintenance required. threshold angle.
in the lintel area.
19
Folding Arrangements / Passage Widths
For 3 and 4-Leaf Doors
KSP / KSM / KSE
The different folding arrangements should be considered at the
planning stage. Depending on the door width or number of leaves,
the door is fitted in a different way according to the site requirements
and available sideroom.
90° 180°
RAM -605 RAM -280 1:2
RAM
RAM = overall frame size
LDB = clear passage width
20
Choice of Folding Arrangements / Passage Widths
For 5 to 12-Leaf Doors
KSP / KSM / KSE
Folding arrangements are read from left to right on the
opening side.
Further folding arrangements on request.
RAM
RAM = overall frame size
LDB = clear passage width
21
Overview of Door Types
Technical Data
22
Sound Planning with
a Strong Partner
Print 02.04
Hörmann KG Werne Hörmann Genk NV, Belgien Hörmann Beijing, China Hörmann Inc. Vonore TN, USA
Hörmann: Quality
Doors
| Up-and-over garage doors | Sectional garage doors
| Sectional industrial doors | Rolling shutters | Rolling grilles
without compromise |
|
Folding doors | Doors for fire stations | High speed doors
Sliding doors | Steel sliding gates | Sportshall doors
| Double-swing doors Strip curtains
Hörmann is the only manufacturer worldwide that offers you a Hinged Doors
complete range of all major building products from one source. | Fire resistant and smoke-tight doors
We are manufacturing in highly-specialized factories using the | Multipurpose doors | Security doors
latest production technologies. | Acoustic doors | Internal doors | Entrance doors in aluminium
The close-knit network of sales- and service companies throughout | Canopies for entrance doors | Windows in aluminium
Europe, and the activities in the USA and China make Hörmann
Door Frames
your strong partner for first-class building products, offering
| Door frames in galvanised steel | Special door frames in steel
"Quality without compromise".
| Door frames in stainless steel
Operators
| Garage door operators | Entrance gate operators
| Operators for industrial doors
Loading Technology
| Dock levellers | Dock seals | Loading houses
www.hoermann.com