Beruflich Dokumente
Kultur Dokumente
TM
a member of group
Full Inverter Technology,
Foreseeable Future
McQuay has been dedicated to the research of Heating, Ventilation, and Air
Conditioning (HVAC) and relevant technologies and continuously makes innovation
and transformation for more than 140 years. McQuay is always in the forefront
of HVAC industry development and has pioneered many "firsts" in the global Air
Conditioner (AC) development history. To numerous household, industrial, and
commercial users, McQuay stands for AC technologies, quality, environmental
friendliness, and trust.
Energy saving Professional design Cutting-edge technology System stability Advanced functions
breakthroughs Design unconstraint High efficiency & energy Reliable operation Ease of use
New energy efficiency saving
01 - 02 03 - 06 07 - 14 15 - 16 17 - 20
3
节能突破 全新能效
Silence and comfort Intelligent control Product series All fresh air
High-quality space Technological life IDU and ODU Solution
parameters
21 - 24 25 - 28 29 - 44 45 - 48
4
节能突破 全新能效
Energy Saving Breakthroughs,
New Energy Efficiency
McQuay always insists on innovating core technologies and optimizing the AC
system. The constant persistence brings the emergence of ECO PRO series
inverter VRF central ACs, which have made new breakthroughs in energy efficiency.
IPLV(C) value
Up to 8.75
101
节能突破 全新能效
Professional Design, Design
series
Unconstraint
McQuay ECO PRO series inverter VRF central ACs take the installation and use
requirements of consumers into consideration in the design, make improvement in
AC convenience, and provide new AC system design experience for users.
03 2
节能突破 全新能效
More Unconstrained Design of the AC System
Maximum equivalent single Maximum height difference Maximum height difference Maximum height difference
pipe length: between IDUs: between IDUs and ODUs when between IDUs and ODUs when
240 m 30 m* ODUs are installed above IDUs: ODUs are installed below IDUs:
90 m 90 m
For items marked with *, consult technicians for details.
04
3 Professional Design, 04
Design Unconstraint
series
85Pa
to provide higher ODU external static pressure, making the exhaust airflow
smoother.
New scroll streamlined axial fan blade
Four ranges of external static pressure for selection (0/30/50/85 Pa),
with the maximum pressure of 85 Pa, to meet requirements of different
installation sizes.
Note: When ODUs are installed in the equipment room, reserve sufficient
heat dissipation and maintenance space to ensure sufficient air supply/
return space for the ODUs. For details, consult professionals.
Multiple Air Supply and Return Modes to Adapt to the Building Structure
Users can select different duct units based on the building structure and interior decoration or use duct units recommended by designers, to match the
interior decoration. In addition, different air supply modes can be used in combination with the duct units to meet personalized requirements of customers
to the maximum extent.
Air outlet
Air outlet
Upper air supply and upper air return Side air supply and bottom air return Side air supply and side air return Side air supply, bottom air return, and
air return from the ceiling*
Note: * The indoor noise increases by 5-8 dB (A) when the bottom return air mode is adopted.
Professional Design, 4
Design Unconstraint
Numerous Types of IDUs to Easily Meet Different Space Layout
Requirements
-20 -20
-23℃
Automatic Addressing
120 m Heating Without
The ODUs provide the automatic Performance Degradation
addressing function to number IDUs The system showcases excellent heating performance. When the
intelligently, which facilitates debugging equivalent pipe length of the system is 120 m, the system can still
& operation and avoids communication implement normal heating without performance degradation to create a
failures caused by incorrect DIP settings. comfortable environment for users.
100% 98% 96%
Hp(m) 90
80
70
60
50
40
Nonpolar Communication Function and 30
20
To positively respond to the EU RoHS directive, McQuay strictly controls the use of six hazardous substances (lead, mercury, cadmium, hexavalent
chromium, poly brominated diphenvl ethers, and polybrominated biphenyl), regards environmental protection as its own responsibility, and protects the
ozone layer and environment to care for our common home.
Irritation to the skin and eyes, pulmonary edema, Limb paralysis, anemia, faint, headache, pain attack, etc.
movement disorder, etc. Pb Cd
Specific
hazardous
Disturbance of thyroid hormone, malformation, etc. Hg Cr6+ Harm to skin, bronchitis, renal dysfunction, liver cancer, etc.
substances in the
RoHS directive
Irritation to the eyes, weakness, emphysema, renal
Disturbance of thyroid hormone, dioxin-like toxicity, etc. PBDE PBB dysfunction, faint, pain disease, etc.
5 Professional Design,
Design Unconstraint
Cutting-edge Technology, High
series
07 6
节能突破 全新能效
High-efficiency High-pressure Chamber Scroll Compressor
The ECO PRO series VRF units adopt a new high-efficiency low-noise high-pressure chamber compressor. The compressor uses the asymmetric scroll
design and a new-generation inverter motor to provide brand-new AC experience for you. The compressor boasts efficient operation, long service life, good
stability, high efficiency, and low noise.
Dual-segment
Radial flexibility
shell design
Ensures the radial contact of the scroll. Provides higher shell rigidity to reduce noise
Optimizes the radial sealing of the scroll. radiation.
Allows radial separation in poor operation
conditions to prevent compressor damage
caused by liquid or sundries.
Double back-pressure
Efficient oil circulation design
axial flexibility
Ensures full lubrication of the bearing system. Ensures the axial contact of the scroll.
Reduces the outer oil circulation rate. Optimizes the inter-gear load of the scroll and
reduces the friction loss.
Allows axial separation in poor operation
conditions to prevent compressor damage
caused by liquid or sundries.
positive-displacement oil
pump design Oil balance pipe
Anti-over-compression Technology
The anti-over-compression technology is used to automatically regulate the too high exhaust pressure to a lower value, thus efficiently
eliminating power consumption increase caused by too high exhaust pressure, saving more operating energy of the compressor and also
enhancing the system stability.
Theoretical PV
diagram
Open valve
Pressure
regulating valve
Pressure (P)
No automatic unloading, resulting
in very high exhaust pressure and
Pressure unloading increasing power consumption
micro channel Automatic unloading, ensuring
Exhaust stable operation
pressure
Compression
chamber
Suction
Fixed scroll pressure
Compression start
Volume (V)
McQuay ECO PRO inverter VRF central ACs use the advanced stepless inverter technology, which enables the system to respond
rapidly, run stably, and deliver better AC experience for users.
Ensures the stability of the exhaust pressure and suction pressure of the unit.
Ensures that the dynamic distribution of the refrigerant flow is more stable with smaller fluctuation during system operation.
Enables the system to respond rapidly and the unit to work more stably and reliably.
Low
speed
Advanced Control
New Integrated three-surface Heat Exchanger to Greatly Improve the Heat Exchange Effect
The heat exchanger plays an important role in ACs, and its heat exchange level directly decides the energy efficiency of central ACs. By
combining its experience in VRF unit development for many years and market demands, McQuay developed the new generation of integrated
three-surface heat exchanger. Such an advanced heat exchanger with high efficiency enables McQuay ECO PRO series VRF units to save
energy efficiently and also proves McQuay's philosophy of building nature with technology.
◇ Integrated three-surface
◇ Integrated three-surface heat exchanger heat exchange structure
The reasonable integrated three-surface heat Enlarges the heat exchange area
exchanger can fully use the unit space and and improves the heat exchange
expand the heat exchange area to improve efficiency.
the heat exchange efficiency significantly.
The reasonable integrated three-surface Hydrophilic coating structure
heat exchanger features compact structure Cobalt (Co) blue anticorrosive layer
Standard chromium anticorrosive
and high strength, and is easy to install and layer
maintain. It is more safe and reliable because Aluminum substrate material
Note: The highly anti-corrosive aluminum fins or highly anti-corrosive coatings can be used for highly
corrosive places such as places with high temperature, high humidity, or high salt content.
9.52 mm 7.94mm
VS VS
Efficient ODU Refrigerant Heat Exchange Path, Saving Energy More Effectively
The efficient 2-in-1 refrigerant convergence technology can convert the high temperature gaseous refrigerant into
low temperature liquid refrigerant via rapid heat exchange and cooling.
The efficient heat exchange path greatly improves the system heat exchange efficiency and unit performance.
Level 1 supercooling
ODU
Level 2 supercooling
The supercooling loop uses electronic expansion low pressure loss reduce the
valves for throttling, which controls supercooling pressure loss, ensure the
more accurately and achieves more efficient
operation of the system.
suction of the compressor,
The highest regulation precision of electronic
and improve the overall
expansion valves can reach 2000 steps, which performance.
achieves more accurate refrigerant control
and stable AC operation.
Multiple Oil Return Control Technologies to Ensure Reliable and Stable Operation of the
System
McQuay ECO PRO series central ACs use multiple oil return technologies, including two levels of oil separation technology, intelligent collection-
distribution oil return technology, patented compressor oil balancing technology, patented compressor oil return control technology, creative oil
return path, efficient oil separators, to implement the oil return efficiency as high as 99% and ensure more stable and efficient operation of the
system.
◇ Patented compressor oil balancing technology and oil return control technology
The units use the intelligent compressor oil balancing technology to balance the oil volume among
compressors and ensure the oil balance of the compressors as well as efficient operation of the
units. In addition, the units can start a specific oil return program based on the output of the ODUs
and compressor operation time, to reclaim the oil in the system and implement oil balance among
compressors.
(Invention patent No.: ZL201110311423.1/ZL201110296030.8)
◇ Efficient oil separator Gas outlet ◇ Technology of removing oil equalizing pipe between modules,
pipe Gas inlet making operation more stable
The efficient centrifugal rotary steering pipe
No oil equalizing pipe
design enables the oil separator to
is required between
effectively generate high-speed rotary
ODUs, which
airflow using the high-pressure gas,
reduces pipeline
separate the heavy lubricating oil from
Connected to installation and
the medium gas under the influence
the oil return refrigerant leakage
of the centrifugal force and gravity, capillary tube Oil equalizing
points, simplifies pipe
and make the lubricating oil flow down
construction, and
along the inner wall of the tube into the
ensures operation Refrigerant pipe
oil return pipe, achieving efficient oil
Efficient large capacity oil separator stability of the
separation.
system.
◇ Creative oil circuit
The compressor uses the creative oil return pipeline design. Each compressor is equipped with a dedicated oil return pipeline to automatically reclaim the
lubricating oil flowing out of the compressor based on the gas suction and discharge temperature as well as gas suction and discharge pressure. In this
way, it can be guaranteed that there is an appropriate amount of lubricating oil inside the compressor and the system runs more stably and reliably.
◇ Intelligent collection-distribution oil return technology to ensure efficient oil return between compressors
The patented creative intelligent collection-distribution oil return technology realizes reasonable distribution of lubricating oil among the compressors. It
collects oil in the gas-liquid separator, and then distributes it to the inside of each compressor as needed to implement oil level balance of the compressors
and ensure the proper operation of the system.
Exhaust Refrigerant gas
Level 2 oil separation
Oil separator
Compressor
Gas liquid
separator
Suction
The compressor internally adopts the efficient oil separation Only a small amount of lubricating oil is brought to the oil separator
structure, in combination with oil-mist separator and internal by the refrigerant gas after level 1 oil separation. The external oil
oil return pipes, to effectively reclaim the lubricating oil in the separator conducts level 2 oil separation to prevent performance
refrigerant so that most lubricating oil of the compressor is kept degradation caused by excessive lubricating oil in the pipeline
inside the compressor. and ensure sufficient lubricating oil for the compressor, thereby
guaranteeing more stable and reliable operation of the system.
Operation
The ECO PRO series inverter VRF units, use multiple types of reliable design,
in combination with McQuay's years of experience in the air conditioning system
operation and VRF unit design, to safeguard the operation of ACs and create stable
and reliable air conditioning systems.
15 14
节能突破 全新能效
Multiple Operation Functions to Ensure More Reliable Operation
of the System
Multiple compressors for the ODUs can operate alternately. When For the ODU combination composed of multiple modules, when one
any compressor fails, the other compressors can still operate module fails, other ODUs can operate normally.
normally so that the use effect of the whole system is not affected
greatly and the users' air conditioning demand is satisfied.
Failure of any fan motor in the dual-fan ODU does not affect normal
use of other fan motors. Meanwhile, the unit will not stop because of
damage of one fan motor, but can still operate normally.
of the unit, judge the unit frosting condition intelligently, control the T1 T2
defrosting time accurately to implement fast and thorough defrosting
and reduce the invalid defrosting time, thus prolonging the unit
50min 90min 70min
heating cycle and alleviating the impact of defrosting on the room
temperature.
Operation time
Other Functions
◇ Intelligent refrigerant storage technology
The high and low pressure sensors are used to control the compression and discharge of the refrigerant, and the refrigerant pipeline storage technology
is used to store the excess refrigerant in the pipeline system.
The gas-liquid separator offers a storage space for the excess refrigerant during defrosting or oil return of the system to prevent refrigerant accumulation
in the compressor and improve the system operation safety and reliability.
◇ Anti-lightning design
The anti-lightning design can reduce the damage caused by lightning strike and other interferences and ensure safe and reliable operation of the unit.
15 System Stability,
Reliable Operation
Advanced Functions and
series
Ease of Use
McQuay, integrates the VRF AC design experience and users' comments, fully
considers the ease of use at the beginning of design, and develops multiple
advanced functions for the ECO PRO series inverter VRF units, so as to provide
more convenient and comfortable AC experience.
17 16
节能突破 全新能效
Considerate Function Design to Deliver More
Comfortable AC Experience
Five Levels of Power Saving
Modes to Ensure More Energy-efficient Operation
The unit supports five levels of power saving modes, Power
which saves the power and provides more flexible saving How to solve the problem
application:
mode
How to save AC fees? of insufficient power
distribution?
The maximum load output of the unit ranges from 60% to
100% adjustable and users can adjust the load output as
required. Multiple power saving modes are available.
When the distributed power is insufficient, the unit will
trip in full-load operation, affecting the AC use. The
maximum output upper limit can be set for the unit based
on the power distribution status, ensuring trouble-free AC
operation.
Black Box
Function
The system supports the black box function, which automatically
records operation condition data of a period of time prior to failure
occurrence so that after-sales service personnel can rapidly and
accurately judge and analyze AC failures, rectify the failures, and
make the AC run properly.
Functions marked with * are optional. Consult technicians for details.
VIP preference
VIP房
VIP room
The system is provided with the function of resisting power failure of IDUs. The system can still operate for a short period of time in case of unexpected
power failure occurring on one or several IDUs.
When an unexpected power failure occurs on the air conditioning system, the system automatically records the operation mode prior to the power failure. After the power
supply is resumed, the system automatically restores to the operating state prior to the power failure without requesting resetting. Intelligent control is implemented to
facilitate use.
Automatic
Memory storage restart after
for emergency power supply
power failure connection
Dual Temperature Sensors to Work in Backup Mode and Ensure Accuracy and Reliability
The unit is equipped with dual temperature sensors. One temperature sensor
point is set on the IDU air return inlet and wired controller each. Users can
select the temperature probed by either of the sensor as the judgment basis of
indoor temperature, making the heating and cooling temperatures more close Temperature
sensor point 1
to requirements.
Temperature
sensor point 2
Refrigerant Reclamation
ODU failure
In case of
IDU failure
When the IDU, ODU or connection pipeline needs to be maintained, refrigerant is reclaimed through operation of the unit to reduce the waste of refrigerant
and lower users' maintenance cost.
19 Advanced Functions 18
and Ease of Use
Smart Room Card Function
The IDU control panel is configured with an intelligent module interface, which implements joint control of the room card and air conditioner easily. The room card is
used to turn on/off the air conditioner. The power failure memory function is also available. After the power supply is resumed, the system automatically restores to the
setting state prior to the power failure and copes with unexpected power failure calmly, making management more convenient. Three modes are available.
◇ Mode 3
The smart room card interface can also implement multiple power-on/off functions, for example, an external module can be connected to power
on/off the air conditioner through modes such as sound control or infrared sensing.
19
23 Advanced Functions
and Ease of Use
series
Large-capacity efficient
3 DC inverter compressor
Optimized three-dimensional
11 pipeline simulation design
to avoid pipeline resonance
and reduce the noise during
4 Special damping gasket for compressor 12 refrigerant flow
5 Multiple soundproof covers for each compressor package Reduce noise during
refrigerant flow
Silent Mode
Night mode
The innovative night silent mode and all-day silent mode can be Capacity
used to reduce the noise during system operation to meet users' Start night End night
mode mode
special needs.
Silence, Comfort, 20
High-quality Space
Intelligent Control and
Technological Life
Intelligent control systems are the development direction of the society. The ECO
PRO series VRF units use comprehensive and diversified controllers, smart and
convenient remote control, building control, and household-based billing systems,
to achieve more human-centered control and provide convenient and controllable
smart life for users.
21
25
节能突破 全新能效
series
Intelligent Controller
◇ Basic functions
Setting/actual indoor Fan
Operation mode
Cooling, heating, air supply, automatic temperature display speed
◇ Convenient functions
Weekly timed operation
Failure self-check and failure code display
Keyboard locking and unlocking
Filter cleaning reminder
Auxiliary electrical heating control
Combination of touch keys and physical keys,
making it easy to operate
HTN LCD and white backlight, delivering a
broader view
Operation
Operation background lamp 温度传感器
Temperature sensor 时间显示
Time display background lamp
Wireless controller
遥控器接收头receiver 滤网清洗提醒
Filter cleaning reminder
Ivory white
A maximum of 64 IDUs can be connected. Monitoring function and operation status display on large LCD
HTN LCD panel and touch keys, which are easy to operate screen (cyclic display function)
Single unit or group unit control (operation/stop function, Permission setting (IDU locking or some function locking of IDUs)
temperature setting) Failure code display
Mode switching Grouping
Filter cleaning reminder
Weekly timed operation
Centralized wired
controller
Centralized wired Touch-screen Touch-screen Touch-screen
controller wired controller wired controller wired controller
◇ The unit can be directly connected to the Modbus-based building control system through the standard Modbus communication interface
configured for the unit, implementing intelligent monitoring without connecting to conversion equipment.
Number of ODUs ≤ 32
◇ The unit can be connected to the BACnet-based building control system through the BACnet gateway. Up to 24 ODUs can be connected to
one BACnet gateway and the number of IDUs cannot exceed 1536.
A maximum of 8 ODUs can be connected
Shielded twisted pair to each RS485 interface
Ethernet cable
BACnet gateway
Functional characteristics:
A maximum of 8 ODUs can be connected
to each RS485 interface
AC power-on/off switching and monitoring
Automatic building BACnet gateway
Monitoring and operation mode switching control
Lower-layer controller permission setting
Monitoring and IDU temperature setting
Monitoring and fan operation setting
BACnet gateway
Intelligent Monitoring
Up to 32 ODUs can be
PC monitoring software connected to a single
RS485 channel and
MC-GTW001AE MC-GTW001AE MC-GTW001BE the number of IDUs
cannot exceed 512.
Functional characteristics:
System monitoring: Provides device view and user view monitoring to facilitate
real-time monitoring of IDUs.
Power-on/off and mode control: Supports settings of the mode, fan speed, temperature,
power-on/off, and auxiliary functions for all units in the
system.
Locking function: Locks the local temperature controller.
Group management: Customizes groups to facilitate unit management in different
areas.
Schedule management: Provides timed commands to set timed power-on/off
functions for IDUs.
System management: Provides IDU operation statistics, makes historical records Intelligent centralized
and fault records of IDUs and ODUs, and generates monitoring
operation reports.
室外机产品阵容
ODU Series
Product 可接 of
Number
产品容量
Capacity MDS080ER5 MDS100ER5 MDS120ER5 MDS140ER5 MDS160ER5 MDS180ER5 MDS200ER5 MDS220ER5 MDS240ER5 Connected IDUs
室内机台数
8HP ● 13
10HP ● 16
12HP ● 16
14HP ● 20
16HP ● 20
18HP ● 24
20HP ● 24
22HP ● 28
24HP ● 28
26HP ● ● 32
28HP ● ● 32
30HP ● ● 36
32HP ● ● 36
34HP ● ● 40
36HP ●● 40
38HP ●● ● 44
40HP ●● ● 44
42HP ●● ● 48
44HP ● ● ● 48
46HP ● ● ● 52
48HP ● ●● 52
50HP ● ●● 54
52HP ● ●● 54
54HP ●●● 56
56HP ●● ● 56
58HP ●● ● 58
60HP ● ● ● 58
62HP ● ●● 60
64HP ● ●● 60
66HP ●●● 60
68HP ●● ● 60
70HP ● ●● 60
72HP ●●● 60
25 Specifications of Outdoor
Units & Indoor Units
series
室内机产品阵容
IDU Series
Model Capacity Range (kW) 2.2 2.5 2.8 2.2 3.6 4 4.5 5 5.6 6.3 7.1 8 9 10 11.2 12.5 14 16 22.4 28
Wall-mounted type
MWM-W • • • • • •
新风机阵容
Specifications of Outdoor 26
Units & Indoor Units
全变频多联机室外机参数
Specifications of Full Inverter VRF ODUs
Unit
机组型号model MDS080ER5 MDS100ER5 MDS120ER5 MDS140ER5 MDS160ER5 MDS180ER5 MDS200ER5 MDS220ER5 MDS240ER5
Nominal cooling capacity
名义制冷量 kW 25.0 28.0 33.6 40.0 45.0 50.5 56.0 61.6 68.0
Nominal heating capacity
名义制热量 kW 28.0 31.5 37.8 44.2 50.6 56.9 63.2 69.5 75.8
Nominal cooling power
名义制冷功率 kW 5.66 6.48 8.85 10.25 11.85 14.75 15.28 17.43 19.52
Nominal heating power
名义制热功率 kW 6.81 7.78 9.67 10.48 12.70 15.08 15.70 17.60 20.32
Nominal cooling current
名义制冷电流 A 10.7 12.8 15.9 18.3 21.8 26.2 27.5 29.3 33.3
Nominal heating current
名义制热电流 A 12.6 14.5 17.3 18.5 22.3 27.0 28.8 29.5 34.1
Max operating current (A)
最大运行电流(A) 19.1 23.5 23.9 37.5 38.7 38.7 43.0 44.5 44.8
Power
电源形式 supply form 380-415V~/3N~50Hz
380V/3N~/50Hz
Air flow rate
风量 m3/h 14500 14500 14500 14500 14500 14500 24800 24800 24800
Noise
噪声 dB(A) 58 59 60 60 61 61 62 62 62
Dimensions
外形尺寸(宽 (W x×D深
x H)
× 高) mm 990×840×1780 1350×840×1780 1990×840×1780
Pipe
接管方式 connection mode Air pipe: welding connection; liquid pipe: flare opening connection
气管:焊接连接;液管:喇叭口连接
Liquid
液管接管尺寸 pipe size mm(in) Φ9.52(3/8") Φ12.7(4/8") Φ15.88(5/8")
Air pipe size
气管接管尺寸 mm(in) Φ22.23(7/8") Φ28.6(1-1/8")
Operating
运行温度范围 temperature range Cooling:-5~52℃;制热:-23~29℃
制冷: -5°C to +52°C; heating: -23°C to +29°C
制冷剂
Refrigerant R410A
Net
净重 weight kg 208 209 242 304 327 329 414 439 442
Notes:
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C, the outdoor dry/wet bulb temperature is
35°C/24°C, connected pipe length is 5 m, and the drop is 0.
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C, the outdoor dry/wet bulb temperature is
7°C/6°C, connected pipe length is 5 m, and the drop is 0.
* The above noise values are tested under the comprehensive cooling capacity conditions and the front operation sound of the unit is tested at the position of 1/2 of (unit
height +1 m). The actual operation sound value is a little higher than the value due to influence of the external environment.
* Parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* The external dimensions are the box dimensions, the depth size excludes the foot size, and the unit height includes the foot size.
* In the case of multi-module combination, order the related accessory packages to facilitate field installation.
Unit
机组型号model MDS260ER5 MDS280ER5 MDS300ER5 MDS320ER5 MDS340ER5 MDS360ER5 MDS380ER5 MDS400ER5
组合(HP)
Combination (HP) 12+14 12+16 12+18 14+18 16+18 18+18 12+12+14 12+12+16
Nominal cooling capacity
名义制冷量 kW 73.6 78.6 84.1 90.5 95.5 101.0 107.2 112.2
Nominal heating capacity
名义制热量 kW 82.0 88.4 94.7 101.1 107.5 113.8 119.8 126.2
Nominal cooling power
名义制冷功率 kW 19.10 20.70 23.60 25.00 26.60 29.50 27.95 29.55
Nominal heating power
名义制热功率 kW 20.15 22.37 24.75 25.56 27.78 30.16 29.82 32.04
Nominal cooling current
名义制冷电流 A 34.2 37.7 42.1 44.5 48.0 52.4 50.1 53.6
名义制热电流
Nominal heating current A 35.8 39.6 44.3 45.5 49.3 54.0 53.1 56.9
Max operating current (A)
最大运行电流(A) 23.9+37.5 23.9+38.7 23.9+38.7 37.5+38.7 38.7+38.7 38.7+38.7 23.9+23.9+37.5 23.9+23.9+38.7
Power supply form
电源形式 380-415V~/3N~50Hz
380V/3N~/50Hz
风量
Air flow rate m3/h 14500+14500 14500+14500+14500
噪声
Noise dB(A) 63 63 63 64 64 64 64 65
Dimensions
外形尺寸 (宽 (W x×D深
x H)
× 高) mm (1350×840×1780)×2 (1350×840×1780)×3
Pipe connection mode
接管方式 Air pipe: welding connection; liquid pipe: flare opening connection
气管:焊接连接;液管:喇叭口连接
液管接管尺寸
Liquid pipe size mm(in) Φ19.05(6/8")
Air pipe size
气管接管尺寸 mm(in) Φ31.8(1-2/8") Φ34.9(1-3/8") Φ38.1(1-4/8")
Operating temperature range
运行温度范围 Cooling:
制冷: -5°C-5~52℃;制热:-23~29℃
to +52°C; heating: -23°C to +29°C
Refrigerant
制冷剂 R410A
Net
净重 weight kg 546 569 571 633 656 658 788 811
Notes:
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C, the outdoor dry/wet bulb temperature is
35°C/24°C, connected pipe length is 5 m, and the drop is 0.
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C, the outdoor dry/wet bulb temperature is
7°C/6°C, connected pipe length is 5 m, and the drop is 0.
* The above noise values are tested under the comprehensive cooling capacity conditions and the front operation sound of the unit is tested at the position of 1/2 of (unit
height + 1 m). The actual operation sound value is a little higher than the value due to influence of the external environment.
* Parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* The external dimensions are the box dimensions, the depth size excludes the foot size, and the unit height includes the foot size.
* In the case of multi-module combination, order the related accessory packages to facilitate field installation.
27 Specifications of Outdoor
Units & Indoor Units
series
全变频多联机室外机参数
Specifications of Full Inverter VRF ODUs
Unit
机组型号 model MDS420ER5 MDS440ER5 MDS460ER5 MDS480ER5 MDS500ER5 MDS520ER5 MDS540ER5 MDS560ER5
Combination
组合(HP) (HP) 12+12+18 12+14+18 12+16+18 12+18+18 14+18+18 16+18+18 18+18+18 18+18+20
Nominal
名义制冷量 cooling capacity kW 117.7 124.1 129.1 134.6 141.0 146.0 151.5 157.0
Nominal
名义制热量 heating capacity kW 132.5 138.9 145.3 151.6 158.0 164.4 170.7 177.0
Nominal
名义制冷功率 cooling power kW 32.45 33.85 35.45 38.35 39.75 41.35 44.25 44.78
Nominal
名义制热功率 heating power kW 34.42 35.23 37.45 39.83 40.64 42.86 45.24 45.86
Nominal
名义制冷电流 cooling current A 58.0 60.4 63.9 68.3 70.7 74.2 78.6 79.9
Nominal
名义制热电流 heating current A 61.6 62.8 66.6 71.3 72.5 76.3 81.0 82.8
Max operating current (A)
最大运行电流(A) 23.9+23.9+38.7 23.9+37.5+38.7 23.9+38.7+38.7 23.9+38.7+38.7 37.5+38.7+38.7 38.7+38.7+38.7 38.7+38.7+38.7 38.7+38.7+43
Power
电源形式 supply form 380-415V~/3N~50Hz
380V/3N~/50Hz
Air
风量 flow rate m3/h 14500+14500+14500 14500+14500+24800
Noise
噪声 dB(A) 65 65 65 65 66 66 66 66
(1350×840×1780)
Dimensions
外形尺寸(宽 (W x×D深
x H)
× 高) mm (1350×840×1780)×3
×2+1990×840×1780
接管方式
Pipe connection mode Air pipe: welding connection; liquid pipe: flare opening connection
气管:焊接连接;液管:喇叭口连接
Liquid
液管接管尺寸 pipe size mm(in) Φ19.05(6/8") Φ22.23(7/8")
Air pipe size
气管接管尺寸 mm(in) Φ38.1(1-4/8") Φ44.5(1-6/8")
Operating
运行温度范围 temperature range Cooling:
制冷: -5°C-5~52℃;制热:-23~29℃
to +52°C; heating: -23°C to +29°C
Refrigerant
制冷剂 R410A
Net
净重 weight kg 813 875 898 900 962 985 987 1072
Notes:
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C, the outdoor dry/wet bulb temperature is
35°C/24°C, connected pipe length is 5 m, and the drop is 0.
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C, the outdoor dry/wet bulb temperature is
7°C/6°C, connected pipe length is 5 m, and the drop is 0.
* The above noise values are tested under the comprehensive cooling capacity conditions and the front operation sound of the unit is tested at the position of 1/2 of (unit
height + 1 m). The actual operation sound value is a little higher than the value due to influence of the external environment.
* Parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* The external dimensions are the box dimensions, the depth size excludes the foot size, and the unit height includes the foot size.
* In the case of multi-module combination, order the related accessory packages to facilitate field installation.
Unit
机组型号 model MDS580ER5 MDS600ER5 MDS620ER5 MDS640ER5 MDS660ER5 MDS680ER5 MDS700ER5 MDS720ER5
Combination (HP)
组合(HP) 18+18+22 18+20+22 18+22+22 20+22+22 22+22+22 22+22+24 22+24+24 24+24+24
Nominal cooling capacity
名义制冷量 kW 162.6 168.1 173.7 179.2 184.8 191.2 197.6 204.0
Nominal heating capacity
名义制热量 kW 183.3 189.6 195.9 202.2 208.5 214.8 221.1 227.4
Nominal cooling power
名义制冷功率 kW 46.93 47.46 49.61 50.14 52.29 54.38 56.47 58.56
Nominal heating power
名义制热功率 kW 47.76 48.38 50.28 50.90 52.80 55.52 58.24 60.96
Nominal cooling current
名义制冷电流 A 81.7 83.0 84.8 86.1 88.0 91.9 95.8 99.8
Nominal heating current
名义制热电流 A 83.5 85.3 86.0 87.8 88.5 93.0 97.6 102.2
Max operating current (A)
最大运行电流(A) 38.7+38.7+44.5 38.7+43+44.5 38.7+44.5+44.5 43+44.5+44.5 44.5+44.5+44.5 44.5+44.5+44.8 44.5+44.8+44.8 44.8+44.8+44.8
Power supply form
电源形式 380-415V~/3N~50Hz
380V/3N~/50Hz
Air flow rate
风量 m3/h 14500+14500+24800 14500+24800+24800 24800+24800+24800
Noise
噪声 dB(A) 66 66 66 67 67 67 67 67
(1350×840×1780) 1350×840×1780+
Dimensions
外形尺寸 (宽 (W x×D深
x H)
× 高) mm (1990×840×1780)×3
×2+1990×840×1780 (1990×840×1780)×2
接管方式
Pipe connection mode Air pipe:气管:焊接连接;液管:喇叭口连接
welding connection; liquid pipe: flare opening connection
Liquid pipe size
液管接管尺寸 mm(in) Φ22.23(7/8")
Air pipe size
气管接管尺寸 mm(in) Φ44.5(1-6/8")
Operating temperature range
运行温度范围 Cooling:-5~52℃;制热:-23~29℃
制冷: -5°C to +52°C; heating: -23°C to +29°C
制冷剂
Refrigerant R410A
Net weight
净重 kg 1097 1182 1207 1292 1317 1320 1323 1326
Notes:
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C, the outdoor dry/wet bulb temperature is
35°C/24°C, connected pipe length is 5 m, and the drop is 0.
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C, the outdoor dry/wet bulb temperature is
7°C/6°C, connected pipe length is 5 m, and the drop is 0.
* The above noise values are tested under the comprehensive cooling capacity conditions and the front operation sound of the unit is tested at the position of 1/2 of (unit
height + 1 m). The actual operation sound value is a little higher than the value due to influence of the external environment.
* Parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* The external dimensions are the box dimensions, the depth size excludes the foot size, and the unit height includes the foot size.
* In the case of multi-module combination, order the related accessory packages to facilitate field installation.
Specifications of Outdoor 28
Units & Indoor Units
series
series
超薄暗装吊顶式室内机 超薄暗装吊顶式室内机
MCC-V
Ultra-thin Ceiling Concealed IDU MCC-V MCC-V
超薄暗装吊顶式室内机
◇ Ultra-thin
超薄设计,暗藏为美 concealed design
MCC-V
◇ 超薄设计,暗藏为美
◇ Integrated
一体化设计 design ◇ 一体化设计
◇ 超薄设计,暗藏为美
The
机器高度仅 machine height is only 199 mm and the depth is 599 mm. The
199mm,深度 599mm,所需吊顶空间更小,吊 机器高度仅
required 199mm,深度
The unit provides 599mm,所需吊顶空间更小,吊
◇ 一体化设计
机组内置电子膨胀阀和扬程高达 机组内置电子膨胀
the built-in electronic expansion valves and the condensate
700mm 的凝结水提升水泵,
ceiling space is small and the ceiling height is smaller. The machine can fully water lifting pump with the lift of 700 mm to save more ceiling height and
顶高度更小,与室内装潢充分配合。
match interior decoration. 顶高度更小,与室内装潢充分配合。
更加节省天花高度,排水更顺畅。
enable smoother drainage. 更加节省天花高度
机器高度仅 199mm,深度 599mm,所需吊顶空间更小,吊 机组内置电子膨胀阀和扬程高达 700mm 的凝结水提升水泵,
200 mm or longer 200mm或以上
200mm或以上
顶高度更小,与室内装潢充分配合。 更加节省天花高度,排水更顺畅。
200mm或以上
240mm or longer
240mm或以上
240mm或以上
240mm或以上 700mm
700mm
Ceiling
天花板 Note: The 天花板
lifting pump with the lift of 700 mm is optional.
注:1200mm扬程提升水泵可选。
注:1200mm扬程提升水
天花板 注:1200mm扬程提升水泵可选。
◇ 灵活多样的安装方式 ◇ 灵活多样的安装方式
◇ 电辅热可选,制热效果更佳 ◇ 电辅热可选,
Air duct
风管
◇ Flexible
灵活多样的安装方式
标准配置后回风箱, Installation Modes
风管 标准配置后回风箱, ◇ 电辅热可选,制热效果更佳
机型可选PTC辅助电加热,有效提升空调机组在严寒环境中的 机型可选PTC辅助
The
现 场standard
可更改 configuration
为 下 回 provides风管 现场
the back return air plenum, which can可be更 改 为采暖效果。
下回 采暖效果。
标准配置后回风箱,
changed to the lower return air plenum on site. The return air plenum can be
机型可选PTC辅助电加热,有效提升空调机组在严寒环境中的
Return
回风软管 air duct
回风软管
风 箱, 现 场 安 装 灵 Air送风
风 箱,
installed
现场 现
更场 改安
可flexibly. 为装下灵 回 送风 采暖效果。supply
活多变。 活多变。
回风软管
风 箱, 现 场 安 装 灵 送风 Return
回风 air
回风
活多变。
Air 风管
duct
风管 回风
Note: The noise generated by the lower return air plenum unit is 5 dB larger than that
风管
generated by the back return air plenum unit.
Air送风
supply
送风
送风 注:下回风箱机组比后回风箱机组噪声会高约5分贝。 Return
回风 air
注:下回风箱机组比后回风箱机组噪声会高约5分贝。 回风
回风
注:下回风箱机组比后回风箱机组噪声会高约5分贝。
◇ Specifications
超薄吊顶式室内机 MCC-V
of ultra-thin 参数表
ceiling
◇ 超薄吊顶式室内机 MCC-V 参数表
concealed IDUs MCC-V
◇ 超薄吊顶式室内机
Unit
机组型号model MCC-V 参数表
MCC022VP MCC025VP
机组型号 MCC022VP MCC025VP MCC028VP MCC032VP MCC036VP MCC040VP MC
MCC028VP MCC032VP MCC036VP MCC040VP MCC045VP MCC050VP MCC056VP MCC063VP MCC071VP
名义制冷量 W 2200 2500 2800 3200 3600 4000
名义制冷量
Nominal cooling capacity
机组型号 W 2200
MCC022VP 2500
MCC025VP 2800
MCC028VP 3200
MCC032VP 3600
MCC036VP 4000
MCC040VP 4500
MCC045VP 5000
MCC050VP 5600
MCC056VP 6300
MCC063VP 7100
MCC071VP
名义制热量 W 2500 2800 3200 3600 4000 4500
名义制热量
Nominal heating capacity W 2500 2800 3200 3600 4000 4500 5000 5600 6300 7100 8000
名义制冷量 W 2200 2500 2800 输入功率 3200 3600 W4000 434500 475000 475600 576300 577100 62
输入功率
Input power W 43 47 47 57 57 62 62 96 96 98 138
名义制热量 W 2500 2800 3200 额定输入电流 3600 4000 4500
A 0.25000 5600
0.23 6300
0.23 7100
0.26 8000
0.26 0.29
额定输入电流
Rated input current A 0.2 0.23 0.23 0.26 0.26 0.29 0.29 0.44 0.44 0.45 0.63
输入功率 W 43 47 47 57
机外静压(可选) 57 Pa62 10(0/30) 62 10(0/30) 96 10(0/30) 96 10(0/30) 98 10(0/30) 138 10(0/30) 10
机外静压(可选)
External static pressure (optional) Pa 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30) 10(0/30)
额定输入电流 A 0.2 0.23 0.23 噪声(高/中/低)
0.26 0.26 0.29 0.29 0.44 0.44 0.45
dB(A) 29/27/26 31/28/25 31/28/25 32/29/25 32/29/25 34/30/27 34 0.63
噪声(高/中/低)
Noise (high/medium/low) dB(A) 29/27/26 31/28/25 31/28/25 32/29/25 32/29/25 34/30/27 34/30/27 37/35/32 37/35/32 37/33/28 40/37/35
机外静压(可选) Pa 10(0/30) 10(0/30) 10(0/30) 风量(高/中/低)
10(0/30) 10(0/30) 10(0/30) 10(0/30)600/480/350
m3/h 430/350/260 10(0/30)600/480/350
10(0/30)630/500/350
10(0/30)630/500/350
10(0/30)730/600/480 730
Air风量(高/中/低)
flow (high/medium/low) m3/h 430/350/260 600/480/350 600/480/350 630/500/350 630/500/350 730/600/480 730/600/480 900/750/600 900/750/600 1050/800/550 1200/980/830
噪声(高/中/低) dB(A) 29/27/26 31/28/25 31/28/25 液管接管尺寸 32/29/25 32/29/25 mm(in) 34/30/27 34/30/27 37/35/32 37/35/32 37/33/28 40/37/35
Φ6.35(1/4'')
液管接管尺寸
Liquid pipe size mm(in) Φ6.35(1/4'') Φ9.52(3/8'')
风量(高/中/低) m3/h 430/350/260 600/480/350 600/480/350气管接管尺寸
630/500/350 630/500/350 mm(in)
730/600/480 730/600/480 900/750/600 900/750/600 1050/800/550 1200/980/830
Φ9.52(3/8'') Φ12.7(4/8
Air气管接管尺寸
pipe size mm(in) Φ9.52(3/8'') Φ12.7(4/8'') Φ15.88(5/8'')
液管接管尺寸 mm(in) 凝结水管尺寸Φ6.35(1/4'') mm Φ9.52(3/8'') Φ20.5
凝结水管尺寸
Condensate water pipe size mm Φ20.5
气管接管尺寸 mm(in) Φ9.52(3/8'') 机组尺寸(宽×深×高) mmΦ12.7(4/8'') Φ15.88(5/8'')
900×599×199
机组尺寸(宽×深×高)
Unit dimensions (WxDxH) mm 900×599×199 1100×599×199
凝结水管尺寸 mm 机组重量 Φ20.5
kg 26 26 26 27 27 28
机组重量
Unit weight kg 26 26 26 27 27 28 28 28 28 33 33
机组尺寸(宽×深×高) mm 电源 900×599×199 1100×599×199220V~/50Hz
电源supply
Power 220-240V~/50Hz
220V~/50Hz
机组重量 kg 26 26 26 27 型号27 28 28 28 28 33 FPV01-A 33
型号
Model
PM2.5 FPV01-A FPV02-A
电源
PM2.5 压损 220V~/50Hz
Pa 8 13 13 14 14 18
PM2.5 filter 压损loss
Pressure Pa 8 13 13 过滤器14 14 18 18 24 24 22 17
过滤器 型号 尺寸(长FPV01-A
× 宽 × 高) mm FPV02-A
816×197×62
PM2.5 尺寸 (长 × 宽
Dimensions × 高) mm
(LxWxH) 816×197×62 1012×197×62
压损 Pa 8 13 13 14 型号14 18 18 24 24 22 FCV01-A 17
过滤器 型号
Model FCV01-A FCV02-A
尺寸 (长 × 宽 × 高) mm 除甲醛 816×197×62 1012×197×62
除甲醛
Formaldehyde 压损 Pa 6 10 10 11 11 14
removal filter
压损loss
Pressure Pa 6 10 10 过滤器11 11 14 14 21 21 18 24
过滤器 型号 尺寸(长FCV01-A
× 宽 × 高) mm FCV02-A
816×197×62
除甲醛 尺寸 (长 × 宽
Dimensions × 高) mm
(LxWxH) 816×197×62 1012×197×62
压损 Pa 6 10 10 11 11 14 14 21 21 18 24
过滤器
* The above尺寸 cooling
(长 ×capacities
宽 × 高) aremm
tested under the conditions in which the indoor dry/wet bulb816×197×62
temperature is 27°C/19°C and the outdoor dry/wet bulb temperature is 35°C/24°C.
1012×197×62
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C and the outdoor dry/wet bulb temperature is 7°C/6°C.
* The above parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* The air flow in the above unit parameter table is the air flow under the standard static pressure, and the value outside () is the standard static pressure.
29 Specifications of Outdoor
Units & Indoor Units
33 33
产品阵容内外机参数
中静压型风管式室内机 中静压型风管式室内机 series
◇ 小机身,大容量,多静压 ◇标
◇ 小机身,大容量,多静压 ◇ 标配冷凝水提升水泵
Medium Static Pressure 机组深度仅 700mm,容量范围从 8.0kW-16kw, 多种静压可选, 机组标
中静压型风管式室内机
机组深度仅 700mm,容量范围从 8.0kW-16kw, 多种静压可选,
Duct Type IDU
机组标配 700mm 扬程冷凝水提升水泵,节省安装吊顶空间,
可实现风管送风,充分配合室内装潢,全面满足各种面积、房 方便现
标准吊顶式室内机
可实现风管送风,充分配合室内装潢,全面满足各种面积、房
中静压型风管式室内机
◇ Small
小机身,大容量,多静压
型空间对美观及舒适的需求。
MCC-S
Body, Large Capacity, Multiple Static Pressures
方便现场安装。
型空间对美观及舒适的需求。
◇ Condensate
标配冷凝水提升水泵 water lifting pump 注:1
The unit depth is only 600 mm and the capacity ranges from 8.0 kW to 16 注:1200mm扬程冷凝水提升水泵可选。
Condensate water lifting pump with the lift of 700 mm for the unit, which saves
机组深度仅
◇◇小机身,大容量,多静压 700mm,容量范围从 8.0kW-16kw, 多种静压可选,
可选配高扬程冷凝水提升水泵 机组标配
◇ ceiling 700mm
标配冷凝水提升水泵 扬程冷凝水提升水泵,节省安装吊顶空间,
kW. Multiple static pressures are available. The IDU can adapt to interior the installation space and facilitates installation.
可实现风管送风,充分配合室内装潢,全面满足各种面积、房
decoration and fully meet requirements of rooms with different areas and types 方便现场安装。
标准为自然排水,可选配
机组深度仅
for 700mm,
beautifulness 容量范围从
and comfort. 700mm/1200mm
8.0kW-16kw, 高扬程水泵,可根
多种静压可选, Note: The condensate water lifting pump with the lift of 700 mm is optional.
机组标配 700mm 扬程冷凝水提升水泵,节省安装吊顶空间,
型空间对美观及舒适的需求。
据自身需求合理订购,应用灵活。
可实现风管送风,充分配合室内装潢,全面满足各种面积、房 注:1200mm扬程冷凝水提升水泵可选。
方便现场安装。 300mm
300mm 1200mm
型空间对美观及舒适的需求。 送风
注:1200mm扬程冷凝水提升水泵可选。
送风
700mm 700mm
300mm 1200mm
700mm
回风
Air
送风
supply 300mm 回风 1200mm
送风
600mm
700mm ◇ 回风方式现场可自由更换 ◇电
◇ 回风方式现场可自由更换 ◇ 电辅热可选,制热效果更佳
Return
回风 air 下、后回风方式现场可更换,只需将底部挡板拆下直接安装至 每个
700mm
下、后回风方式现场可更换,只需将底部挡板拆下直接安装至 每个机型可选配 PTC 辅助电加热,有效提升空调机组在严寒
后部回风口即可实现回风方式的转变,无需现场定制挡板,安 环境的
回风
后部回风口即可实现回风方式的转变,无需现场定制挡板,安 环境的采暖效果。
◇ 回风方式现场可自由更换 装更便利,有效缩短施工周期。
◇ 电辅热可选,制热效果更佳
装更便利,有效缩短施工周期。
下、后回风方式现场可更换,只需将底部挡板拆下直接安装至
◇ Free
回风方式现场可自由更换
Change of Return Air Diretion 每个机型可选配 PTC 辅助电加热,有效提升空调机组在严寒
Default (back return air)
◇ 电辅热可选,制热效果更佳
后部回风口即可实现回风方式的转变,无需现场定制挡板,安 Air duct
风管
环境的采暖效果。
The lower
风管 and back return air modes can be changed on site. Only the bottom
下、后回风方式现场可更换,只需将底部挡板拆下直接安装至 每个机型可选配 PTC 辅助电加热,有效提升空调机组在严寒
装更便利,有效缩短施工周期。
baffle needs to be removed and installed to the back return air inlet to change
制
后部回风口即可实现回风方式的转变,无需现场定制挡板,安
the return air direction. The baffle does not need to be made on site. The 环境的采暖效果。
制 热
installation is more convenient and the
Default construction
(back return air)duration is shortened. Air supply Air supply
装更便利,有效缩短施工周期。 热 送风 送风 Return air
回风 能
能 PTC电加热, 力
风管 送风 送风 回风
力 Field transformation (back return air) 提升机组能力
Air duct
风管
风管
风管 制
热
Return
PTC电加热,
送风 送风 回风 能
制 回风软管
air duct
力 提升机组能力
回风软管 热 Air
送风 supply Air
送风 supply Return air
回风
送风送风 送风 回风 能 PTC电加热,
风管 送风 回风 室外温度
力 提升机组能力
风管 ◇ 中静压型风管式室内机参数表
◇ Specifications
中静压型风管式室内机参数表 回风软管
of medium static pressure duct type IDUs
送风 送风 回风 机组型号 MCC080VP
室外温度 MCC090VP MCC100VP
Unit
机组型号model MCC080VP MCC090VP回风软管
MCC100VP MCC112VP MCC125VP MCC140VP MCC160VP
额定制冷量 W 8000 9000 10000
额定制冷量
Rated 送风
cooling capacity W 送风8000 回风9000 10000 额定制热量11200 W 室外温度
12500 9000 14000 10000 16000 11200
◇ 中静压型风管式室内机参数表
额定制热量
Rated heating capacity W 9000 10000 11200 输入功率12500 14000
W 184 16000 235 18000 295
输入功率
Input power W 184 235 295 额定输入电流 295 A322 0.86 390 1.13 410 1.40
机组型号 MCC080VP MCC090VP MCC100VP MCC112VP MCC125VP MCC140VP MCC160VP
◇ 中静压型风管式室内机参数表
额定输入电流 A 0.86 1.13 1.40
Rated input current
出风静压 1.40 1.55
Pa 50(30/80)1.85 50(30/80)1.95 50(30/80)
额定制冷量 W 8000 9000 10000 11200 12500 14000 16000
出风静压
Outlet static pressure Pa 50(30/80) 50(30/80) 50(30/80) 噪声(高/中/低) 50(30/80) 50(30/80) 50(30/80) 41/40/38 50(30/80) 41/40/38
◇ 暗装吊顶式室内机
额定制热量 机组型号 W MCC-S( 9000标准型 ) 参数表
MCC080VP MCC090VP
10000 MCC100VP
11200 MCC112VP
12500
dB(A)
MCC125VP
14000
40/37/36
MCC140VP
16000 MCC160VP
18000
噪声(高/中/低)
Noise (high/medium/low) dB(A) 40/37/36 41/40/38 41/40/38 高风风量(高/中/低) 42/38/36 43/40/38
m3/h 45/44/40 1400/1200/980
1200/950/840 45/44/411680/1370/1100 1
额定制冷量
输入功率 W3 8000
184 9000
235 10000
295 11200
295 12500
322 14000
390 16000
410
高风风量(高/中/低)
High 机组型号
wind air flow (high/medium/low) m /h 1200/950/840
MCC022SP MCC025SP1400/1200/980 1680/1370/1100
MCC028SP MCC032SP MCC036SP1700/1380/1130
可选电加热量 MCC040SP MCC045SP1900/1530/1290
W MCC050SP 2200/1830/1520
2200 2300/1900/1540
MCC056SP MCC063SP
2200 MCC071SP3400
额定制热量
额定输入电流 W
A 9000
0.86 10000
1.13 11200
1.40 12500
1.40 14000
1.55 16000
1.85 18000
1.95
可选电加热量
Optional
名义制冷量
electrical heating capacity W 2200 2200 3400 液管尺寸 4000 3400 4500mm 3500 3600 3600
输入功率
出风静压 WW
Pa
2200184
50(30/80)
2500 2352800
50(30/80)
3200295
50(30/80)
3600 295
50(30/80) 322 5000
50(30/80)
5600
390
50(30/80)
6300 410 7100
50(30/80)
液管尺寸
Liquid pipe size
名义制热量 mm W 2500 2800 3200 3600 气管尺寸
4000 Φ9.52(3/8'')
4500 5000mm 5600 6300 7100 1.95 8000
额定输入电流
噪声(高/中/低) A
dB(A) 0.86
40/37/36 1.13
41/40/38 1.40
41/40/38 1.40
42/38/36 1.55
43/40/38 1.85
45/44/40 45/44/41
气管尺寸
Air pipe
输入功率
size mm 81 Φ15.88(5/8'')
凝结水管尺寸 mm
3W 47 47 50(30/80) 47 81 82 8250(30/80) 82 82 123 50(30/80)123
出风静压
高风风量(高/中/低) mPa /h 50(30/80)
1200/950/840 50(30/80)
1400/1200/980 1680/1370/1100 50(30/80)
1700/1380/1130 1900/1530/1290 50(30/80)
2200/1830/1520 2300/1900/1540
凝结水管尺寸
Condensate
额定输入电流
water pipe size mm A 0.21 0.21 0.21 0.37 机组尺寸(宽×深×高)
0.37 R3/4
0.37 0.37 mm 0.37 0.37 1150×600×300
0.56 0.56
噪声(高/中/低)
可选电加热量 dB(A)
W 40/37/36
2200 41/40/38
2200 41/40/38
3400 42/38/36
3400 43/40/38
3500 45/44/40
3600 45/44/41
3600
机组尺寸(宽×深×高)
Unit dimensions (WxDxH)
机外静压(可选) mm3Pa
1150×600×300 机组重量 15(0/30/50) 1900/1530/1290kg 1450×600×300 38
高风风量(高/中/低)
液管尺寸 m
mm /h 1200/950/840 1400/1200/980 1680/1370/1100 1700/1380/1130 Φ9.52(3/8'') 2200/1830/1520 2300/1900/1540
机组重量
Unit weight
噪声(高/中/低) kg
dB(A) 38 34/32/30电源 48
可选电加热量
气管尺寸 W
mm 2200 31/29/27 2200 3400 3400
Φ15.88(5/8'')
35/32/29
3500 3600 37/36/35
3600
电源
Power supply
风量(高/中/低) m 3
/h 450/370/280 580/470/380 220-240V~/50Hz
220V~/50Hz 800/650/540 960/780/600
液管尺寸
凝结水管尺寸 mm Φ9.52(3/8'')
R3/4
* 以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结
** The above cooling capacities are
液管接管尺寸 tested under the conditions in which the indoor dry/wet bulb temperature
mm(in)
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果; is 27°C/19°C, the outdoor dry/wet bulb temperature is 35°C/24°C.Φ9.52(3/8")
Φ6.35(1/4")
气管尺寸
机组尺寸(宽×深×高) mm 1150×600×300 * 以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果
Φ15.88(5/8'') 1450×600×300
** The above heating capacities are
气管接管尺寸 tested under the conditions
mm(in) in which the indoor dry/wet bulb temperature is 20°C/15°C
Φ9.52(3/8") and the outdoor dry/wet bulb temperature is 7°C/6°C.
以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果;
凝结水管尺寸
机组重量 mm
kg 38 R3/4Φ12.7(4/8")
* 以上参数会因产品改良有所改动,请以机器上的铭牌参数为准; 48
Φ15.88(5/8")
** The above parameters
以上参数会因产品改良有所改动,请以机器上的铭牌参数为准; may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
凝结水管尺寸
机组尺寸(宽×深×高) mmparameter table is the air flow
1150×600×300 * R3/4
以上机组参数表中,风量为标准静压下的风量,()外为标准静压。 1450×600×300
电源
** Note: The air flow in the above unit under the standard static pressure, and the220V~/50Hz
content outside () is the standard static pressure.
以上机组参数表中,风量为标准静压下的风量,()外为标准静压。
机组尺寸(宽×深×高) mm 1124×469×220 1384×490×250
机组重量 kg 38 48
* 以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
机组重量 kg 22
35 25 27
35 电源
* 以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果; 产品阵容内外机参数 220V~/50Hz
产品阵容内外机参数 电源 220V~/50Hz
** 以上参数会因产品改良有所改动,请以机器上的铭牌参数为准;
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
** 以上机组参数表中,风量为标准静压下的风量,()外为标准静压。
* 以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果;
* 以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果;
* 以上参数会因产品改良有所改动,请以机器上的铭牌参数为准;
35 * 以上参数会因产品改良有所改动,请以机器上的铭牌参数为准。
* 以上机组参数表中,风量为标准静压下的风量,()外为标准静压。 Specifications of Outdoor 30
产品阵容内外机参数 Units & Indoor Units
35 34
天花嵌入式四面出风室内机 MCK-V
Ceiling cassette 4-way airflow IDU MCK-V
◇ Milky white panel and streamlined design
乳白色面板,流线型设计 Air supply in multiple directions and more even
◇ 多方向送风,温度分布更均匀
The professional industrial design, milky white panel, and streamlined design
temperature distribution
专门工业设计,乳白色面板,流线型设计,美观大方,有效融
present a beautiful and elegant effect, which blend the interior decoration style 独有四面送风设计,大幅扩展送风范围,气流可达房间每个角
The unique four-way air supply design extends the air supply range. The airflow
and raise the decoration pattern.
入室内装修风格,提升装修格调,更显高雅。 can reach every corner of the room, making the temperature distribution more
落,令整个空间温度更均匀。
even.
◇ Specifications
四面出风天花式室内机 of ceiling MCK-V
concealed four-way IDUs MCK-V
参数表
Unit
机组型号model MCK028VP MCK032VP MCK036VP MCK040VP MCK045VP MCK050VP MCK056VP MCK063VP MCK071VP
Nominal
名义制冷量 cooling capacity W 2800 3200 3600 4000 4500 5000 5600 6300 7100
Nominal
名义制热量 heating capacity W 3200 3600 4000 4500 5000 5600 6300 7100 8000
Input
输入功率 power W 55 55 55 72 72 92 92 102 102
Rated input current
额定输入电流 A 0.27 0.27 0.27 0.33 0.33 0.42 0.42 0.47 0.47
Noise (high/medium/low)
噪声(高/中/低) dB(A) 30/28/26 31/29/27 31/29/27 34/31/28 34/31/28 39/36/33 39/36/33 40/38/35 40/38/35
Air flow (high/medium/low)
风量(高/中/低) m3/h 600/490/420 640/540/440 640/540/440 800/630/540 800/630/540 1000/800/680 1000/800/680 1200/980/810 1200/980/810
Liquid
液管接管尺寸pipe size mm(in) Φ6.35(1/4'') Φ9.52(3/8'')
Air pipe size
气管接管尺寸 mm(in) Φ9.52(3/8'') Φ12.7(4/8'') Φ15.88(5/8'')
Condensate
凝结水管尺寸 water pipe size mm Φ20.5
Unit dimensions (excluding
机组尺寸(不含面板)
the panel) (WxDxH) mm 893×820×265
(宽×深×高)
Unit weight (excluding the panel)
机组重量(不含面板) kg 26 26 26 30 30 30 30 31 31
Panel dimensions (WxDxH)
面板尺寸(宽×深×高) mm 990×990×75
Panel
面板重量 weight kg 4.4
Power
电源 supply 220-240V~/50Hz
220V~/50Hz
Unit
机组型号model MCK080VP MCK090VP MCK100VP MCK112VP MCK125VP MCK140VP
Nominal
名义制冷量 cooling capacity W 8000 9000 10000 11200 12500 14000
Nominal
名义制热量 heating capacity W 9000 10000 11200 12500 14000 15700
Input
输入功率 power W 142 142 144 155 171 204
Rated input current
额定输入电流 A 0.82 0.82 0.85 0.91 1.05 1.23
Noise (high/medium/low)
噪声(高/中/低) dB(A) 42/39/35 42/39/35 43/40/38 45/42/39 48/45/42 50/45/42
Air flow (high/medium/low)
风量(高/中/低) m3/h 1300/1060/880 1300/1060/880 1360/1110/920 1530/1250/1040 1600/1310/1090 1800/1480/1230
Liquid
液管接管尺寸pipe size mm(in) Φ9.52(3/8'')
Air pipe size
气管接管尺寸 mm(in) Φ15.88(5/8'')
Condensate
凝结水管尺寸 water pipe size mm Φ20.5
Unit dimensions (excluding
机组尺寸(不含面板)
the panel) (WxDxH) mm 893×820×315
(宽×深×高)
Unit weight (excluding the panel)
机组重量(不含面板) kg 35 35 35 36 36 36
Panel dimensions (WxDxH)
面板尺寸(宽×深×高) mm 990×990×75
Panel
面板重量 weight kg 4.4
Power
电源 supply 220-240V~/50Hz
220V~/50Hz
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C and the outdoor dry/wet bulb temperature is 35°C/24°C.
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
** The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C and the outdoor dry/wet bulb temperature is 7°C/6°C.
以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果;
* The above parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* 以上参数会因产品改良有所改动,请以机器上的铭牌参数为准。 38
31 Specifications of Outdoor
Units & Indoor Units 产品阵容内外机参数
series
高静压管道式室内机 MDB-V
High Static Pressure Duct Type IDU MDB-V
◇ High external static pressure to flexibly cater to AC requirements of different spaces
超高机外静压,可灵活应对各种空间的空调需求
The IDU provides a maximum of 200 Pa external static pressure and can supply air from multiple points from a long distance. It can be used in irregular space,
提供最高floors,
staggered 200Pa
and 机外静压,可远距离多点送风,无论是不规则空间,还是错层空间、大空间,都能从容应对。
large space.
◇ Comfortable
舒适送风 air supply ◇Elegant
装饰美观 decoration
The unit supplies cold/hot air to each area through air ducts. The air outlet can The IDU and air duct are installed inside the ceiling like the large-scale central
机组通过管道将冷(暖)气送到各个领域,风口可根据实际情
flexibly adopt side air supply or bottom air supply according to actual situations
空调室内机组和风管安装在天花内,如同大型中央空调,安装
air conditioning system. After installation, only air outlets are visible and the air
to supply even and comfortable air flow.
况灵活采用下送及侧送形式,气流均匀,送风舒适。 outlets are well integrated with the interior decoration.
后仅有风口,与室内装饰融为一体,显得典雅华丽。
Round diffuser Swirling air outlet Square diffuser Bar-type air outlet
Note: above equipment is prepared by customer.
◇ Specifications
高静压管道式室内机 MDB-V
of high static 参数表duct type IDUs MDB-V
pressure
Unit
机组型号 model MDB125VP MDB140VP MDB224VP MDB280VP
Nominal
名义制冷量 cooling capacity W 12500 14000 22400 28000
Nominal
名义制热量 heating capacity W 14000 16000 25000 31000
Input
输入功率 power W 481 620 910 1020
Rated
额定输入电流input current A 2.1 2.5 2.08 2.25
External
机外静压static pressure Pa 100 100 200 200
Noise (high/medium/low) dB(A)
噪声(高/中/低) 46/44/42 50/48/46 54 57
Air flow (high/medium/low) m3/h
风量(高/中/低) 2300/1886/1564 2750/2255/1870 4100 4320
Liquid
液管接管尺寸pipe size mm(in) Φ9.52(3/8'') Φ12.7(4/8'')
Air pipe size
气管接管尺寸 mm(in) Φ15.88(5/8'') Φ22.23(7/8'')
Condensate
凝结水管尺寸 water pipe size R3/4 R1
Unit dimensions (WxDxH)
机组尺寸(宽×深×高) mm 1227×830×350 1427×830×350 1760×958×515
Unit
机组重量weight kg 60 69 131 133
Power
电源 supply 220V~/50Hz
220-240V~/50Hz 380V/3N~/50Hz
** The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C and the outdoor dry/wet bulb temperature is 35°C/24°C.
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C and the outdoor dry/wet bulb temperature is 7°C/6°C.
** The
以上所标制热量是在室内干/湿球温度20/15℃,室外干/湿球温度7/6℃工况条件下的测试结果;
above parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
* When
以上参数会因产品改良有所改动,请以机器上的铭牌参数为准;
MDB224/280VP exists in the same system, the cooling capacity of other single IDUs is not less than 7.1 kW.
Specifications of Outdoor 40
32
* 当同一系统中有MDB224/280VP时,其他单台室内机冷量不小于7.1kW。
Units产品阵容内外机参数
& Indoor Units
Wall-mounted IDU MWM-W
◇ Ultra-thin design to perfectly match the interior decoration
超薄设计,与室内装修完美融合 ◇ Swing
摆动式设计 design
The thickness of multiple models is only 205 mm, which can be installed Guide blades can automatically swing up and down to achieve the good air
多款机型厚度仅 205mm,安装更方便;靓丽的外形设计,即
conveniently. The pretty appearance design can perfectly match interior 导风叶可以自动地上下摇摆来获得良好的送风状态,亦可遥控
supply status. The air supply mode can also be set by a remote controller to
decoration.
使室内已完成装潢设计,也可以完美搭配室内装修。 supply comfortable air everywhere in the room.
定位送风方式,将舒适气流送至室内各个角落。
Swing up
and down
◇ Super
超静音设计 silent design ◇ Simple
安装简便灵活 and flexible installation
The IDUs use large-diameter non-isometric helical through-flow wind wheels The units have high-precision electronic expansion valves inside, making the
室内机采用大直径不等距斜齿贯流风轮,优质塑封电机,机组
and excellent plastic covering motors to enable the unit to run more stably and
机组内置高精度电子膨胀阀,安装更简单方便,同时机组接管
installation more convenient. In addition, pipes can be flexibly connected for
smoothly. The advanced airflow analysis technology CFD is used
运转更平稳,更流畅;利用先进气流分析技术 CFDto对风道进
optimize air the units, and the refrigerant pipe connection direction can be flexibly selected
设计灵活,可根据实际安装需要,灵活选择冷媒配管接管方
paths, making the air supply smoother and wind sound softer. based on actual installation requirements.
行优化,送风通道更顺畅,风声更柔和。 向。
Left pipe
名义制冷量
Nominal cooling capacity W 2200 2800 3600 4500 5600 7100
名义制热量
Nominal heating capacity W 2500 3200 4000 5000 6200 7800
输入功率
Input power W 33 33 34 34 35 55
额定输入电流
Rated input current A 0.16 0.16 0.17 0.17 0.17 0.26
Noise (high/medium/low)
噪声(高/中/低) dB(A) 35/33/30 35/33/30 37/34/31 40/36/33 43/39/35 46/44/41
Air
风量 flow rate m3/h 450/380/310 480/400/320 540/470/400 600/500/450 800/680/520 920/840/720
Liquid
液管接管尺寸pipe size mm(in) Φ6.35 (1/4'') Φ9.52(3/8'')
Air pipe size
气管接管尺寸 mm(in) Φ9.52 (3/8'') Φ12.7 (4/8'') Φ15.88(5/8'')
Condensate
凝结水管尺寸 water pipe size mm Φ20
Unit dimensions (WxDxH)
机组尺寸(宽×深×高) mm 900×205×282 1080×221×304
Unit
机组重量weight kg 12 16
Power
电源 supply 220-240V~/50Hz
220V~/50Hz
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C and the outdoor dry/wet bulb temperature is 35°C/24°C.
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C and the outdoor dry/wet bulb temperature is 7°C/6°C.
* The above parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
41
33 Specifications of Outdoor
产品阵容内外机参数
Units & Indoor Units
series
Clean filter
screen
◇ 座吊两用,简约美观
Ceiling and floor type installation to present simple and beautiful style
Fashionable design elements are adopted for the unit. The floor type or ceiling installation can be used based on environmental requirements, to perfectly fit the
采用流行的设计元素,可根据不同的环境需求,选择座式安装或吊式安装,完美契合空间,特别适用于已装修工程改造、不做吊
space. It is especially applicable to concise commercial places where the decoration transformation is performed and no ceiling is required.
顶的简约商业场所。
Specifications
◇ 明装吊顶 of ceiling exposed/floor-type
/ 落地两用室内机 MCM-V 参数表 IDUs MCM-V
Unit
机组型号 model MCM056VP MCM071VP MCM112VP MCM125VP
Nominal
名义制冷量 cooling capacity W 5600 7100 11200 12500
Nominal
名义制热量 heating capacity W 6300 8000 12500 14000
Input
输入功率 power W 81 116 161 161
Rated
额定输入电流input current A 0.4 0.55 0.7 0.7
Noise (high/medium/low) dB(A)
噪声(高/中/低) 48/45/42 50/46/43 52/48/44 52/48/44
Air flow (high/medium/low)
风量(高/中/低) m3/h 1100/970/750 1300/1100/870 1850/1550/1200 1850/1550/1200
Liquid
液管接管尺寸pipe size mm(in) Φ6.35(1/4'') Φ9.52(3/8'')
Air pipe size
气管接管尺寸 mm(in) Φ12.7(4/8'') Φ15.88(5/8'')
Condensate
凝结水管尺寸 water pipe size mm Φ20.5
Unit dimensions (WxDxH)
机组尺寸(宽×深×高) mm 1214×670×214 1214×670×249 1714×670×249
Unit
机组重量weight kg 39 44 64 64
Power
电源 supply 220-240V~/50Hz
220V~/50Hz
* The above cooling capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 27°C/19°C and the outdoor dry/wet bulb temperature is 35°C/24°C.
以上所标制冷量是在室内干/湿球温度27/19℃,室外干/湿球温度35/24℃工况条件下的测试结果;
* The above heating capacities are tested under the conditions in which the indoor dry/wet bulb temperature is 20°C/15°C and the outdoor dry/wet bulb temperature is 7°C/6°C.
* The above parameters may be changed due to product improvement. The parameters indicated on the unit nameplate should prevail.
Specifications of Outdoor 42
34
Units产品阵容内外机参数
& Indoor Units
◇ MCK-VP 四面出风天花室内机面板
机型 遥控面板 线
室内机选配件
MCK028~MCK140VP
◇ 外置辅助热水盘管 MCKV-P-RC-MDSE MCKV-P
室内机选配件
Accessories
◇ MCK-VP
热水盘管箱 for IDUs
四面出风天花室内机面板 HWT08-15 HWT18-32 HWT35-50 HWT60
◇ 外置辅助热水盘管
适用机型 MCC022SP MCC025SP MCC028SP MCC032SP MCC036SP MCC040SP MCC045SP MCC050SP MCC056SP MCC063SP MCC071SP MCC080VP MCC090VP MCC100VP MCC112VP MCC125VP MCC140VP MCC160VP
◇ Control
MCK-VP panel of the MCK-VP ceiling cassette four-way
四面出风天花室内机面板
机型 遥控面板 IDU
风量(m3/h) 450 450 450 580 580 580 800 800 800 960 960 1200 1400 1700 线控面板 1900 1900 2500 2500
◇热水盘管箱
外置辅助热水盘管 HWT08-15 HWT18-32 HWT35-50 HWT60
供热量(W) MCK028~MCK140VP
3600 3600 3600 4200 4200 4200 6300MCKV-P-RC-MDSE
6300 6300 7200 7200 8000 9200 MCKV-P4-SLM-MDSE
10200 12000 12000 13500 13500
适用机型 3 机型
MCC022SP Model
MCC025SP MCC028SP MCC032SP MCC036SP MCC040SP Wireless
MCC045SP 遥控面板
remote
MCC050SP controllerMCC063SP
MCC056SP panel MCC071SP MCC080VP MCC090VP MCC100VP 线控面板
WiredMCC112VP
controllerMCC125VP
panel MCC140VP MCC160VP
◇ 室内机选配件 水流量(m
热水盘管箱
风量(m3/h)
风阻力(Pa)
/h) 0.31
450
0.31 HWT08-15
450
MCK028~MCK140VP
7 7
0.31
450
7
0.36
580
13
0.36
580
13
0.54
580
12
0.54 0.54 HWT18-32
0.54
800 MCKV-P-RC-MDSE
12
800
12
800
12
0.6
960
17
0.6
960
17
0.67
1200
23
0.79
1400
15
0.90
HWT35-50
1700
21
0.99 0.99
1900 1900 2500 2500
MCKV-P4-SLM-MDSE
31 31
1.11
HWT60
26
1.11
26
适用机型
供热量(W) MCC022SP
3600 MCC025SP
3600 MCC028SP
3600 MCC032SP
4200 MCC036SP
4200 MCC040SP
4200 MCC045SP
6300 MCC050SP
6300 MCC056SP
6300 MCC063SP
7200 MCC071SP
7200 MCC080VP
8000 MCC090VP
9200 MCC100VP
10200 MCC112VP
12000 MCC125VP
12000 MCC140VP
13500 MCC160VP
13500
水阻力(kPa)
3 3 2 2 2 3 3 6 6 6 6 7 7 9 10 13 11 11 17 17
风量(m
水流量(m/h)/h) 450
0.31 450
0.31 450
0.31 580
0.36 580
0.36 580
0.54 800
0.54 800
0.54 800
0.54 960
0.6 960
0.6 1200
0.67 1400
0.79 1700
0.90 1900
0.99 1900
0.99 2500
1.11 2500
1.11
净质量(kg) 9.5 9.5 9.5 9.5 9.5 11 11 11 11 11 11 11 14 14 14 14 15 15
◇ Accessories
供热量(W)
室内机选配件
风阻力(Pa) 7 for
3600 7IDUs
3600 3600
7 4200
13 4200
13 4200
12 6300
12 6300
12 6300
12 7200
17 7200
17 8000
23 9200
15 10200
21 12000
31 12000
31 13500
26 13500
26
3
*水阻力(kPa)
水流量(m /h) 0.31 0.31
热水盘管加热量测试工况:60℃进水,50℃出水;
2 2 0.31
2 0.36
3 0.36
3 0.54
6 0.54
6 0.54
6 0.54
6 0.6
7 0.6
7 0.67
9 0.79
10 0.90
13 0.99
11 0.99
11 1.11
17 1.11
17
◇ 室内机选配件
*风阻力(Pa)
上表中的风阻力在高速档下测得;机组配接热水盘管使用时,机外静压的选择必须考虑热水盘管的风阻力;
净质量(kg) 7
9.5 7
9.5 7 wired controller
LCD
9.5 13
9.5 13
9.5 12
11 12
11 12
11 12
11 17
11 17
11 23
11 15
LCD 21
14 remote 31
14controller
14 31
14 26
15 26
15
*水阻力(kPa)
热水盘管外置,安装在室内机组出风口。
2 2 2 3 3 6 6 6 6 7 7 9 10 13 11 11 17 17
* 热水盘管加热量测试工况:60℃进水,50℃出水;
净质量(kg) 9.5 9.5 9.5 9.5 9.5 11 11 11 11 11 11 11 14 14 14 14 15 15
* 上表中的风阻力在高速档下测得;机组配接热水盘管使用时,机外静压的选择必须考虑热水盘管的风阻力;
* 热水盘管加热量测试工况:60℃进水,50℃出水;
热水盘管外置,安装在室内机组出风口。
* 上表中的风阻力在高速档下测得;机组配接热水盘管使用时,机外静压的选择必须考虑热水盘管的风阻力;
* 热水盘管外置,安装在室内机组出风口。
室外机选配件
Note: The above optional parts with different functions can be selected for the IDUs as required.
室外机选配件 序号
1
安装配件名称
MDS-A-A1E 直角弯头、变径管、Y型三通
配件内容 适用机型型号
MDS260ER5~MDS360ER5
室外机选配件
Accessories
序号 for ODUs
2 MDS-A-A2E
安装配件名称
直角弯头、变径管、Y型三通
配件内容
MDS380ER5~MDS500ER5
适用机型型号
◇ 内置电加热选型 3 MDS-A-A3E 直角弯头、变径管、Y型三通 MDS520ER5~MDS540ER5
1 MDS-A-A1E 直角弯头、变径管、Y型三通 MDS260ER5~MDS360ER5
序号 4
No. MDS-A-A6E
安装配件名称
Installation Accessory Model 直角弯头、变径管、Y型三通
配件内容
Accessory MDS560ER5~MDS720ER5
适用机型型号
Applicable Model
◇ 内置电加热选型
◇ 内置电加热选型 电加热量(W) 2 电源 MDS-A-A2E 直角弯头、变径管、Y型三通 适用机型 MDS380ER5~MDS500ER5
注:组合模块机组安装时,请选购以上对应安装配件。
1
3 MDS-A-A1E
MDS-A-A3E Right angle elbow,
直角弯头、变径管、Y型三通
直角弯头、变径管、Y型三通Reducer, Y-type triplet MDS260ER5~MDS360ER5
MDS520ER5~MDS540ER5
1000 MCC022/025/028VP MCC022/025/028SP
电加热量(W) 2
4 电源 MDS-A-A2E
MDS-A-A6E Right直角弯头、变径管、Y型三通
angle elbow, Reducer,
直角弯头、变径管、Y型三通 Y-type triplet
适用机型 MDS380ER5~MDS500ER5
MDS560ER5~MDS720ER5
1200 MCC032/036/040VP MCC032/036SP
3 MDS-A-A3E Right直角弯头、变径管、Y型三通
angle elbow, Reducer, Y-type triplet MDS520ER5~MDS540ER5
电加热量(W) 1000
注:组合模块机组安装时,请选购以上对应安装配件。
2000
电源 MCC022/025/028VP MCC022/025/028SP
MCC045/050/056VP MCC040/045/050/056SP
适用机型
4 MDS-A-A6E Right直角弯头、变径管、Y型三通
angle elbow, Reducer, Y-type triplet MDS560ER5~MDS720ER5
1200
2200 MCC032/036/040VP MCC032/036SP
MCC063/071/080/090VP MCC063/071SP
Note: 1000
In the 2000
case of installation of combined units, purchase the above corresponding installation accessories.
注:组合模块机组安装时,请选购以上对应安装配件。 MCC045/050/056VP
MCC022/025/028VP MCC022/025/028SP
MCC040/045/050/056SP
3400 MCC100/112VP
220V~/50Hz
12003500 MCC032/036/040VP MCC032/036SP
控制选配件
2200 MCC063/071/080/090VP
MCC125VPMCC063/071SP
3400 MCC100/112VP
2000 3600 220V~/50Hz MCC045/050/056VP MCC040/045/050/056SP
MCC140/160VP
3500
700 MCC125VP
MCK028/032/036/040/045VP
34002100
700
MCC140/160VPMCC063/071/080/090VP MCC063/071SP
MCK050/056/063/071/080VP
MCK028/032/036/040/045VP
MCK090/100/112/125/140VP MCC100/112VP
◇ 控制选配件
1400
Optional
单独控制器选配件
* 以上电加热量的允许误差为-10%~+5%;
220V~/50Hz
35002100 1accessories for MC-HMI321AE-(1/10/50)A
separate controllers
MCK050/056/063/071/080VP
MC321A
MCK090/100/112/125/140VP
MCC125VP
* 辅助电加热量是在室内机组风量为名义风量时的测试值;
◇ 3600
单独控制器选配件 2
No.
MC-HMIGS01CE-(1/10/50)A
Order Code Name
MCGS01
Model MCC140/160VP
Applicable Model
** 带电加热的机组功率等于电加热的功率与标准机组(不带电加热的机组)功率之和。
以上电加热量的允许误差为-10%~+5%;
3 MC-HMIGS01DE-(1/10/50)A MCGS01
700
* 辅助电加热量是在室内机组风量为名义风量时的测试值;
1 MC-HMI321AE-(1/10/50)A Wired controller MC321A MCK028/032/036/040/045VP
All IDUs and fresh air IDU
* 带电加热的机组功率等于电加热的功率与标准机组(不带电加热的机组)功率之和。
2 MC-HMIGS01CE-(1/10/50)A
Wireless remote controller
MCGS01
1400 (including remote receiver) MCK050/056/063/071/080VP
All IDUs and fresh air IDU
1
3 MC-HMI321AE-(1/10/50)A
MC-HMIGS01DE-(1/10/50)A
Wireless remote controller MC321A
MCGS01 MWM/MCM/MCK
(excluding remote receiver)
注:*2100 (1/10/50)表示单个包装盒所含控制器数量;
2 MC-HMIGS01CE-(1/10/50)A MCGS01 MCK090/100/112/125/140VP
Notes:* *A/B/C表示白色/蓝色/金色;
3
(1/10/50) indicates MC-HMIGS01DE-(1/10/50)A
the number of controllers accommodated in a single package box. MCGS01
◇ 外置电加热选型
* 以上电加热量的允许误差为-10%~+5%;
* A/B/C indicates white, blue, and gold respectively.
详细见订购命名表。
For details, see the order naming list.
注:* (1/10/50)表示单个包装盒所含控制器数量;
* 辅助电加热量是在室内机组风量为名义风量时的测试值;
◇ 外置电加热选型
* A/B/C表示白色/蓝色/金色;
型号 辅助电加热量(W) 电源 适用机型
* 带电加热的机组功率等于电加热的功率与标准机组(不带电加热的机组)功率之和。
(1/10/50)表示单个包装盒所含控制器数量;
注:* 详细见订购命名表。
HDP1.2T08-15 1200 220V~/50Hz MCC022~036SP
* A/B/C表示白色/蓝色/金色;
型号 辅助电加热量(W) 电源 适用机型
HDP2.4T08-15 2400 220V~/50Hz MCC022~036SP
◇ Accessories
集中控制选配件
详细见订购命名表。
HDP1.2T08-15
for centralized control
1200 220V~/50Hz MCC022~036SP
HDP2.4T18-32 2400 220V~/50Hz MCC040~MCC071SP/080VP
HDP2.4T08-15
HDP3.6T18-32 Centralized Wired 2400
3600 220V~/50Hz
220V~/50Hz MCC022~036SP
MCC040~MCC071SP/080VP
Control Mode Centralized Monitoring System Automatic Building Control
HDP2.4T18-32 Controller 2400 220V~/50Hz MCC040~MCC071SP/080VP
◇ 集中控制选配件
HDP2.4T35-45 2400 220V~/50Hz MCC090~MCC112VP
HDP3.6T18-32
HDP3.6T35-45 3600
3600 220V~/50Hz
220V~/50Hz MCC040~MCC071SP/080VP
MCC090~MCC112VP
◇ 集中控制选配件
HDP2.4T35-45
HDP4.8T35-50
Ordered
2400
4800 220V~/50Hz
380V/3N~/50Hz
MC-CCS101AE (centralized monitoring software) MCC090~MCC112VP
MCC090~MCC125VP
Standard configurated with BodBus gateway
HDP3.6T35-45 MC-HMI323AE 3600 MC-GTW001AE (1-channel conversion port)
220V~/50Hz MCC090~MCC112VP
◇ 外置电加热选型 parts
HDP7.2T35-50
HDP4.8T35-50
HDP5.4T60
7200
4800
5400
380V/3N~/50Hz
MC-GTW001BE (4-channel conversion port)
380V/3N~/50Hz
380V/3N~/50Hz
MCC090~MCC125VP
MC-GTW003A
MCC090~MCC125VP
MCC140/160VP
(BACNET protocol gateway)
HDP7.2T35-50
HDP7.2T60 7200
7200 380V/3N~/50Hz
380V/3N~/50Hz MCC090~MCC125VP
MCC140/160VP
*Note: The quantity of electricity of the IDU is not calculated
HDP5.4T60 5400for electric meter selection. If it needs to be380V/3N~/50Hz
calculated, consult professional technicians. MCC140/160VP
型号
*注:电表选型不计算室内机电量,如需计算内机电量请咨询专业技术人员。
* 以上电加热量的允许误差为-10%~+5%; 辅助电加热量(W) 电源
HDP7.2T60 7200 380V/3N~/50Hz MCC140/160VP
* 电加热箱外置,安装在室内机组出风口处。
HDP1.2T08-15
* 以上电加热量的允许误差为-10%~+5%;
1200 220V~/50Hz M
*注:电表选型不计算室内机电量,如需计算内机电量请咨询专业技术人员。
43
HDP2.4T08-15 2400 220V~/50Hz 44 M
* 电加热箱外置,安装在室内机组出风口处。
产品阵容内外机参数
HDP2.4T18-32
43
35 2400
*注:电表选型不计算室内机电量,如需计算内机电量请咨询专业技术人员。 220V~/50Hz 产品阵容内外机参数
MCC04
Specifications of Outdoor
产品阵容内外机参数
HDP3.6T18-32
Units & Indoor Units 3600 220V~/50Hz MCC04
44
产品阵容内外机参数
PT.DAIKIN APPLIED SOLUTIONS INDONESIA
Head Office:
Surabaya. Jl. Kayoon 42-44, Surabaya 60271, Indonesia | P. +62-31-547 8787, 532 5365 | F. +62-31-532 0049
Branch Office:
Jakarta. L'Avenue Office Building 25th Floor Jl. Raya Pasar Minggu Kav. 16, Pancoran, Jaksel - Indonesia.
P. +62 21 8066 7118 (hunting) | F. +62 21 8066 7119
Jakarta. Jl. Duren Tiga Raya ( PLN ) No. 101, Kav. A-1 Jakarta 12760, Indonesia
P. +62-21-7919 2468 | F. +62-21-7919 2473
Medan. Jl. Pinang Baris No. 28, Komp. Imperium, Kel. Sunggal, Medan 20128, Sumatera Utara, Indonesia
P. +62-61-8002 5528, 8002 5828 | F. +62-61-8002 5628
Semarang. Jl. Jendral Sudirman 75 A, Semarang, Jawa Tengah 50145, Indonesia
P. +62-24-764-35145 | F. +62-24-764-34250
Bali. Pertokoan Gunung Soputan Blok B, Jl. Gunung Soputan No. 11, Denpasar 80117, Indonesia
P. +62-361-485 854, 344 8666 | F. +62-361-485 854
Balikpapan. Sentra Eropa II AB - 5 No. 1 Balikpapan Baru, Kalimantan Timur, Indonesia
P. +62-542-720 4205, 721 2085 | F. +62-542-721 2087
Timika. Jl. Cendrawasih Jalur SP 2 Ruko Segitiga Emas, Timika, Papua 99910, Indonesia
P. +62-0901 326 4814
Authorized Dealers:
Indonesia
www.daikinapplied.co.id