Beruflich Dokumente
Kultur Dokumente
By Rohit Daswani
Contents
After this a new field appears and the user can see the category field, please select “Miscellaneous”.
In this new Page for CE UMX Security wizard click on Run Wizard.
This takes us to a new web page where you should add the legal entities that you want to have access to. This will
grant access to all the bank accounts within the legal entity. Choose the privileges that you want to assign to this role
on the bank accounts: USE, MAINTENANCE and BANK ACCOUNT TRANSFERS.
Then “Save and Apply” the changes.
2)System Setups
Press CTRL+F11, then press the down arrow key or PG down till we get the desired Operating Unit:
Then, Enter the following:
“Purge”
Choose “Signing Authority Approval” as “Workflow Enabled” and switch to “Cash Management Transactions” tab
Choose
3) Bank Setup
From the above screen click on “Create” button. This takes us to the a new Bank Information page.
Country: “………..”
State: “….”
Status: “Active”
Click on “Apply”.
On the next page that appears below, click “Save and Next”.
Once we save the bank details, Oracle takes us to a page where we have to create a contact. For this give the details as
below:
Prefix: “…”
On the next web page select the contact name and click on “Finish”.
Next we need to create a bank branch.
(or Navigate to Cash Management-> Setup->Banks. Search for the appropriate bank and click on “Create Branch” )
Select “Create new Branch”, Give the “Branch Name” and “Branch Type”
Click on “Save and Next” which takes us to the below confirmation page.
Click on “Create Account” to create bank account from the above webpage if required.
Alternatively, user can also create a bank account later as shown below:
Enter the
“Country”, “Bank Name” and “Branch Name” as below. Then click on “Continue”.
In the next web page give thefollowing details:
Bank Account Owner: “(Name of the Legal Entity)”. For “Account Use” checkmark “Payables” and “Receivables”.
Click “Next”.
In the page that opens as shown below enter the following details
Currency as “USD”
Enter:
Then again in the below confirmation page that appears click on “Save and Next”.
Click on “Add Organization Access” and in the next page enter as below:
Check mark “Payables” and “Receivables” and for “Organizarion” enter “Vision Operations”.
Once done click “continue”.
We are again directed to a confirmation page wherein we click on “Save and Next”.
In the next page we get a confirmation that anew bank account has been created.
Query for the bank account created by giving the “Account Name” “Branch Name”. Then click on “Search”.
In the page that appears select the account and click on “Manage Payment Documents”.
Click on “Create”.
This payment document is used to pay the invoice through the banks. Here we define what kind of paper stock type to
use for check leaves and the no of leaves (like in a checkbook), If u go to payable workbench if u try to pay for that
invoice payables reserve one document .We will define this payment documents when we are defining Banks.
Use this window to define payment documents for your Internal bank accounts in Oracle Payables. Note that you do
not need to define payment documents for refunds because refunds do not use payment documents. ult
To setup the bank transaction codes navigate to Cash Management->Banks->Bank Transactions Codes
Select the appropriate bank account as shown above.
In the page that appears give the details as in the below image. Note that the “Trans Source” for any of them is either
“AP Payments” or “AP Receipts”.
Type: Standard
Invoice Date: Since it is a practice transaction we input an earlier date ‘05-Mar-2017’ Invoice Number
:INV050320171, Invoice amount: 20,000
Gl Date: Same as Invoice Date, 05/Mar/2017, Distribution Set : Equipment Expenses (Full)
Give thee
“Type” as “Item”,
GL Date in the line should be same as the transaction date at the header level i.e “05-MAR-2017”.
In the same line level tab, click on “Distribution”. This takes us to the below form.
We can see that the 25000 is split as per the distribution set. This is because of the distribution set selected earlier.
Then click on Actions tab once again and click on “Create Accounting (Final)” for the invoice and then click on
“OK”.
2) Next we create a payment for the invoice.
For this go to Actions tab and click on “Pay in full’ and click on “OK’.
“Payment type” can be anything. The “Trading Partner” is defaulted so is “Supplier number”, “Supplier Site”
Enter the following
“Payment Method”: Check ults and Payment Document as “Malaysia Payment Document’.
The “Payment Process Profile” should be “Standard Check Format”. Enter the document number as “1”. Save the
same. Note the accounting is “Unprocessed”.
The document number is the check number through which we are making the payment in standard check format.
In the same form click on “Action” tab and then click on “Create Accounting (Final)” for the payment.
Now the accounting changes to “Processed”. Also note that the Status remains “Negotiable” before accounting as well
as after accounting.
Query for the same invoice in the invoices work bench to verify accounting status and amount paid.
Create a bank statement for the above transaction and perform reconciliation.
In the Find Bank Statements form click on “New”. A bank statement form opens.
In this new form enter the “Account Number” as “149097899”, Account name as “Vision_MVB_Malay”. Enter the
Statement Number as “08-MAR-2017_1”.
Note that the Invoice Date must be lesser than Bank Statement Date.
(Important: Please note that the statement date must be before today’s date. If we enter a greater date systems
shows an error.)
That is the reason why when we entered the invoice in the previous step we entered it for a date before today.
Therefore bank account transaction date < Bank Account Statement and GL Date < Today’s date or System Date
In this new Lines form enter the “Line Number” as “1”, “Code” as “100” since that is the bank code defined earlier for
AP payments, “Number”(Which is nothing but the check number or document number) as “1” and the amount of the
invoice “26,725”. The Status should remain “Unreconciled”.
Click on the “Available” tab in the bottom of the page. In the new” Find Transaction” form select “Detail” and “AP
Payment” and in the “Transaction” tab enter the “Invoice Numbers”.
Check the line and click on “Reconcile” at the bottom of the page.
Once done we can see that the we go back to the” Bank Statement Lines” form .
We can see that the Amount reconciled is “26743.75” and the “Status” is “Reconciled”.
We can verify the same whenever we want by navigating to “Banks Statements and Reconciliation” form again and
then give the “Statement Number” and click on “Find”.
In the new Bank Statement form click on “Review” tab and then click on “Lines” tab. This is seen as below.
Thus the Bank statement has been reconciled.
Query with trading partner and the document number. The status is “Reconciled Unaccounted”.
Click on “Actions” and this time select “Create Accounting (Final Post)”.
It can be seen that the Status of the payment changes to “Reconciled”. The status for “Accounting” changes to
“Partial”. By Creating Accounting for the same the Status will change to “Reconciled”
Auto Reconciliation Transaction
For Auto-Reconciliation first start with creating a payables invoice. For this follow the same steps as above for
creating an invoice. Note that the method of payment is “Check”. Enter the details for the details at the line level and
header level as in the previous steps. Save the invoice, validate it and, “Create Accounting (Final)” for the same.
Next again create the payment in the same manner as above. Note that the bank account is “Vision_MVB_Malay”, the
“Payment Method” is “Check”, “Payment Document” is “Malaysia Payment Document”, “Payment Process Profile”
is “Standard Check Format” and “Document Number” is “4”.
Save the invoice and “Create Accounting (Final)” for the same.
Now enter bank statement and perform reconciliation. Navigate to Cash Management->Bank Statements->Bank
statement and reconciliation.
Create the bank statement as in the above steps. Note that the bank statement date must be lesser than today but
greater than the AP invoice date. Statement number is “12-MAR-2017_1”.
We follow the same steps for entering the bank statement line.
However after entering and saving the bank statement line we do not go for manual reconciliation by clicking on
“Available” tab.
Close the forms and navigate to Program->Request. Choose “Single Request” and enter “AutoReconciliation”.
GL Date: “12-Mar-2017”
The “AutoReconciliation” program triggers the “AutoReconciliation Execution Report program”. (As seen below)
Wait for the programs to be completed
In the “Find Bank Statements Form” click enter the statement number and click on find.
Click on “Find”. Then in the new form click on “Review” tab. In the “Bank Statement” form click on “Lines”. As can
be seen below the line is “Reconciled”. This can be seen from the Status.
Now navigate to Payables Manager->Payments->Payments. Query for the payment document. It can be seen that the
status is “Reconciled Unaccounted” and the “Accounting” is “Partial”. Just like in manual reconciliation.
As in manual reconciliation, “Create Accounting Final Post”.
Create an AP Invoice Using the details as above except for “Payment Method” which should be “Wire”. This is shown
below
Next click on “Actions” and Select Pay in Full and Click on OK.
A new “Payments Form” opens wherein we fill in the details for the following particulars just as it was done below:
“Payment Date” as
“Bank Account” as
The “Payment Process Profile” should be “Standard Check Format”. Enter the document number as “5”. Save the
same. Note the accounting is “Unprocessed”.
In the new Bank Statement form give the date and GL date and give the statement number as “13-MAR-2017_1”.
Type as “Payment”, Code as “100”, Number as “5”, Transaction Date and Value Date as “13-Mar-2017” and the
Amount as “21380”. Note that the Status is “ Unreconciled”.
Step 3) Reconciliation
In the Bank Statements Lines Form click on Available and query for AP Payments.
Just as before Check mark the Line in this form which is associated with the invoice created and click on “Reconcile”.
Once done we can see that the status changes to “Reconciled”. This is shown below.
Now, navigate back to Payables Manager and check the payment status as well as create final accounting and post it.
Create an Invoice in “Accounts Payable” where in the “Payment Method” chosen is “Electronic”. All the other details
should be the same as before.
Note the Invoice number is INV_15032017.
Note that once the Payment Method is chosen as Electronic, the Remit-to Bank Account Name and the Remit-to Bank
Account Number fields are automatically populated. This is the bank account details of the suppliers bank.
Save the invoice, validate and create accounting for the same.
Once that is done click on “Actions tab-> Pay in full”. Now once again enter the details as before except for the
“Payment Method” which should be “Electronic”, and select the “Payment Process Profile” as “SWIFT MT103” .
Note that the “Document Number” is automatically populated. Also Note that the “Remit to Account” number is also
given.
In the new Bank Statement form give the date and GL date and give the statement number as “14-MAR-2017_1”.
Note that the Number field should be the electronic payment document number that is 19342, and the transaction and
value date are same as invoice number i.e “10-Mar-2017”.
3) Perform Reconciliation.
Now in order to perform reconciliation click on Available tab in the bottom of the page.
In the Bank Statements Lines Form click on Available and query for AP Payments.
Just as before Check mark the Line in this form which is associated with the invoice created and click on “Reconcile”.
Once done we can see that the status changes to “Reconciled”. This is shown below.
Now, navigate back to Payables Manager and check the payment status as well as create final accounting and post it.
Note that the status of the payment after accounting should be reconciled as below:
Eft v wire
Electronic funds transfer (EFT) is the electronic exchange, transfer of money from one account to
another, either within a single financial institution or across multiple institutions, through
computer-based systems. Wire transfer is a type of EFT.
EFT is an electronic exchange, the transfer of money from one account to another. The transfer can be
from either within a single financial institution or across multiple institutions. The transfer is done through
computer-based systems.
Wire transfer is a method of electronic funds transfer from one person to another that can be made from
one bank account to another bank account or through a transfer of cash at a cash office, such as Western
Union. Wire transfer is also known as credit transfer or bank wire.
The process of a wire transfer starts with a person telling the bank to transfer a certain amount of money to
an account, identified by IBAN and BIC codes. The sending bank transmits a message, via a secure
system, to the receiving bank, requesting that it effect payment according to the instructions given. The
receiving bank then must accept the transfer
The advantage of a wire transfer, over other types of EFT, despite its additional fees, is the fact that, a
wire transfer may take place in less than half the time. Wire transfers are usually preferred by people
who need to transfer significant amounts of funds very quickly and can't wait the 2-4 business days
that a standard EFT will take. However, due to the fees of a wire transfer, it is mainly used by
businesses or wealthy individuals to quickly transfer funds. Most people tend to stick to EFT for
normal everyday tasks, such as bill payment or payment for purchased merchandise. Some small
businesses also may use EFT to pay employees and receive payment for merchandise.
For the row “All Other” under Transacting Balancing Segment Value, click on Update. This takes us to the below
“Update Intercompany Accounts Page”.
Click on Define Accounts for the “All Other” row. This takes us to the below page.
In the new page that appears enter the Intercompany Receivables accounts and the Intercompany Payables Accounts,
if not entered already.
Now click on “Intracompany Balancing Rules” tab on the left in the home page. Query up with the ledger and click on
Go.
Click on Create in the above page to create a new row for row “Cash Management-Bank Transfers”.
In the page that appears we can create rules in the “Create Intracompany Balancing Rules” region.
Give the name of the ledger as Vision Operations (USA), the Source as “Cash Management”, the Category as “ Bank
Transfers(1)” . Below in the Balancing Details tab give the “Debit Balancing Segment Value” and the “Credit
Balancing Value” as “ All Other”.
Give the Debit Account as 01-000-1810-0000-000 and the Credit Account as 01-000-2370-0000-000.
Click on the Options Tab.
For Clearing Balancing Segment Value: Use for Many-to-Many Journals Only
Click on apply.
We can see that a new set of intracompany balancing rules called “Cash Management-Bank Transfers(1)” has been
created.
Now click on Organizations tab. Query for the organization Vision Operations. Make sure that it is active and enabled.
Now navigate to Cash Management-> Setup-.> System-> Payment Template. This takes us to the below page:
Click on Create to create a new template.
Currency: USD
Make sure that the “Authorize Transaction” and “Settle Transaction Options” are set to No.
In this page select the payment Template as I/c TransCode, Bank Reference Number as Manual-12345
The Transfer date as “16-Mar 2017” Currency as USD Transfer Amount as 1000.
In the above make sure that the settlemen thru oracle payments is “no” and transfer date is = or > todays date.
Click on Apply.
We are again taken back to the main page where we can query the transaction with the Bank Reference number ad
click on go.
We can see from the image above that the system has allocated a transfer Number to the transaction which is “1”.
Transaction has a status of new.
Click on “Validate” to validate and complete the transfer. The bank account transfer is successful and this can be seen
below:
In the above page by clicking on the transaction number 1 takes us to a new page.
This new page above has the details of the transaction for our confirmation. We can also click on “View Cashflows”
tab to understand the movement of cash between the payee organization and the payer organization. This is shown
below:
Click on the home page to go back to the menu.
Next Navigate to Cash Management-> Bank Statement-> Manual Clearing-> Clear Transactions.
In the above Find Transaction Form that opens Query with the Account Number.
A new Clear Transactions form appears. This form has the details of the interbank transfer done from Vision
Operations Bank MyVisionBank.
Check and verify the details. Once done checkmark the transaction and click on Clear Transaction tab at the bottom of
the page.
Now once again navigate bank to find the account for the receiving bank.
In the above Find Transaction Form that opens Query with the Account Number.
A new Clear Transactions form appears. This form has the details of the interbank transfer for Bank of America bank
account.
Document Payable. A document to be paid by the deploying company (Payer) and it may represent, for example, a
Pay Run/Payment Process Request. A pay run is a broad term, which describes the process by which a group of
invoices is selected and processed for payment. It is roughly equivalent to the Release 11i concept of a payment batch.
The term Pay Run is often used interchangeably with the term Payment Process Request. A payment process request
is technically a request created by a source product for Oracle Payments payment services. The payment process
request, which originates in the source product during the invoice selection process, contains one or more documents
payable to be paid. During the payment process, the documents payable in the payment process request are built into
payments.
Payee. The person or organization that is being paid, for example, the supplier, employee, or customer to whom the
payment is made.
Payment Instruction. A payment instruction is a collection of payments, along with aggregate payment information,
that is formatted. Depending on the setup, a payment instruction may be converted into a file to be printed onto
checks or into a payment file that is transmitted to a payment system for further processing and disbursement.
Payment Process Profile. A payment process profile is a payment attribute assigned to documents payable, which
specifies handling of the documents payable, payments, and payment instructions. Payment process profiles
* transmission information
* payment grouping
* payment limits
What is the difference between Clearing a (subledger) transaction and Reconciling it? What is the purpose of these
two distinctions?
Answer
------
Clearing a transactions creates accounting entries that recognize the movement of cash. Reconciling matches bank
account activity to subledger (payment, receipt) activity. Transactions may be cleared prior to reconciliation if the user
wishes to obtain a more accurate picture of cash (in the GL) but is not yet ready or willing to reconcile.
Reconciled entries always cleared, i.e u cannot reconcile an entry if it is not cleared. For e.g, you cannot reconcile
BAT transactions if it is not cleared.