Beruflich Dokumente
Kultur Dokumente
P E R R Y E Q U I P M E N T C O R P O R AT I O N
P E T R O C H E M I C A L
P H O T O G R A P H I C
E L E C T R O N I C S
CHEMICAL
BEVERAGE
COSMETICS
®
INDUSTRIAL
PEACH® 90-P90
Patented Liquid Filtration Elements
POWER GENERATION
P E C O E N G I N E E R E D A P P L I E D C O N I C A L H E L I X
Patent No. 5827430 & 5893956 (International Pat. Pending)
PEACH ® 90
FILTRATION TECHNOLOGY
provides consistent, predictable performance
and high contaminant loading.
PEM MEDIA
PECO Engineered Media, specifically designed for filtration, is the key component in
the production of the PEACH® 90 liquid element. Fibers of various denier are weighed,
blended and thermally bonded, then formed into a compressed filter media sheet. Various
layers of PEM media are then used in the manufacture of the PEACH® 90
element.
PEACH ® 90
PECO Engineered Media 150X PEACH® 90 consists of several lateral sections of PEM media
SEM Photo by Southwest Research Institute formed into a conical helix pattern. Each section consists of
multiple helical wrapped layers. Through thermal bonding,
layers are applied to conform and overlap the previous layer,
forming a cone…the conical helix structure. This structure re-
sults in a graded density pattern that yields high
contaminant loading, structural strength, maximum efficiency,
and excellent reproducibility.
PEACH ® 90
ISO 9001 CERTIFICATION ENVIRONMENTALLY FRIENDLY
PECO Filtration Elements are manufactured • 100% synthetic
under a quality management system certified to • Incinerable
ISO 9001. This assures that each PECO Filter is • Ease of disposal: crush, shred, chop, etc.
engineered and manufactured to the highest • Coreless, no metal parts
level of quality…assuring you consistent • No unloading
tolerances and quality…filter after filter! • No media migration
• FDA compatible polypropylene media
*
OPERATING DATA
▲
40*
Flow /336”--------- - - - - - *
30* x
* Flow Direction: PECO CODE O
20 222/CLOSED
10
Outside to Inside as
0
standard.
1 2 3 4
Pressure Drop (psid)
1μ 5μ 10μ 25 - 150μ
x
Recommended Differential
Changeout:
70* 25-30 psid
*
60*
pH Range
▲
*
Flow Rate (gpm)
50*
* Polypropylene-(0-14)
40* PECO CODE F
Fl ow/347”---------- - - - - * Polyester-(0-9) FINNED/222
30
20
10 Collapse Pressure:
0
50 psid* @ 75º F, 24º C
1 2 3 4 * applicable to 2.5” O.D. only
Pressure Drop (psid)
1μ 5 & 10μ 25 - 150μ
Operating Temperatures:
Polypropylene-180º F, 82º C
POLYPROPYLENE
35 Polyester-240º F, 116º C ▲
30 x PECO CODE J
ELEMENTS ORING/226
Flow Rate (gpm)
25 x
20* x
F l ow/10”---------- - - - - - *
15
x
PRODUCT
10 SPECIFICATION:
5
0
Media:
1 2 3 4
Pressure Drop (psid)
Polypropylene, Polyester.
1μ 5M & 10μ 25μ 40-150μ
Core:
▲
x
None PECO CODE S
70*
* SPRING
60 x End Cap Styles:
See illustrations at right.
Flow Rate (gpm)
50
40* x
F l ow/336”--------- - - - - - *
Gaskets:
30
None required on DOE
20 x style. Buna-n,Viton,
10 EPR and Silicone on
0 other end cap
1 2 3 4
options.
1μ 5μ
Pressure Drop (psid)
10μ 25μ 40μ 60-150μ
▲
x End Cap Accessories: PECO CODE X
DOE with
70* Springs—Carbon Steel or Core Extender
*
60*
*
Stainless.
x
Flow Rate (gpm)
50*
*
Core Extender -
40*
F l ow/347”--------- - - - - - * Polypropylene
30 x
20
Stainless Steel
10
▲
1 2 3 4
Pressure Drop (psid)
1μ 5μ & 10μ 25μ 40-150μ PECO CODE I
x Single Open End
© 1999, Perry Equipment Corporation 1401 Style
P EACH ® 90 - P 90 E LE M E N T N OM E N CLATURE
P9O 2 29 S 1 N 10 L
email:
fs@pecousa.com
web site:
www.pecousa.com
EL-P90-SL-01 LHA10/02
Printed in USA