Beruflich Dokumente
Kultur Dokumente
Pathbreakers
The world of formwork technology at a glance.
Whatever structure you’re building, the Doka Formwork Experts are the people to turn to. They’ll get straight down to work with
you and develop an optimum solution for every build. The Doka Formwork Catalogue is your guide to the world of formwork
technology, and will give you a taste of our products, services and pathbreaking formwork solutions.
Contents
Doka Formwork Catalogue, 2013 edition | Doka GmbH | Josef Umdasch Platz 1 | 3300 Amstetten | Austria | © Copyright by Doka GmbH
We reserve the right to make alterations in the interests of technical progress.
Column formwork Top 50 252 DokaShore 444
Single-sided formwork 260 Tunnel formwork 450
Supporting construction frame 260 Heavy-duty supporting system SL-1 450
Bridge formwork 454
Cantilever forming traveller 454
Doka Floor Systems Composite forming carriage 460
Forming wagon T 466
Tableforms274 Forming wagon TU 474
Dokamatic table 274 Bridge edge beam formwork T 480
Dokaflex table 288 Bridge formwork ParaTop 486
Shifting devices for tables 296
Panel floor formwork 310
Panel floor formwork Dokadek 30 310 Doka Safety Systems
Timber-beam floor formwork 322
Dokaflex 30 tec 322 Working and Protection Platforms 490
Doka Xtra 332 Platform system Xsafe plus 490
Dokaflex 1-2-4 342 Folding platform K 502
Bracket platform M 512
Guardrail systems 524
Doka Climbing Systems Edge protection system XP 524
Handrail posts & clamps 538
Automatic climbing formwork 354 Protection screens 544
Platform SCP 354 Protection screen Xclimb 60 544
Automatic climbing formwork SKE plus 360 Access Systems 550
Automatic climbing formwork Xclimb 60 366 Stair tower 250 550
Cooling-tower formwork SK175 372 Ladder system XS 556
Crane-lifted climbing formwork 378 Working scaffolds 562
Guided climbing formwork Xclimb 60 378 Working scaffold Modul 562
Climbing formwork MF240 382
Climbing formwork K 392
Dam formwork 398
Shaft platform 406
Important notice: Always observe all relevant safety regulations (e.g. as issued by construction-industry employee safety organisations) applying to the use of our products in the
country in which you are operating. In addition, the User Information booklets (Instructions for Assembly and Use), which contain information on standard system set-up and on
compliant utilisation of Doka formwork systems, must also be observed. The illustrations in this formwork catalogue show the situation during formwork assembly and are therefore
incomplete from the safety aspect. It could be dangerous to combine our formwork equipment with other manufacturers’. If you intend to combine different systems, please contact
Doka for advice first.
The Formwork Experts.
Trust
The foundation on which creative energy and outstanding
performance can build new shapes and forms.
Between partners who are focusing on a shared goal, trust is a cornerstone of success.
It comes from the positive experience of working together again and again over many
years. Confidence built on trust, as the basis upon which new and good things can grow.
Responsibility
Getting straight down to work, keeping the whole picture
firmly in view.
Reliability
No matter how high your requirements – you can
rely on Doka.
Experience
“Each age writes its own history” – milestones of
the Doka journey. 1985
A winner right from
the outset
1958 1965
Framax, the second genera-
The year a strong brand Breakthrough for large- tion of Doka framed form-
is born – Doka area formwork work, comes to market.
1928 19 30
granted a “Concession to 19 20 1922 1924 1926
1916 1918
1914
ply the carpentry trade” 6 1910 1912
19 0
in Kollmitzberg, near 19 0
4
2
19 0
Amstetten. 0
8
19 0
189
6
189
4
189
2
189
0
189
8
188
6
188
188
2
188
4
1971 1989
0
18 8 Success with ‘Showing off’
8
187
187
4
187
6
1961 climbing formwork formwork technology
2
187
187
0 Going international:
8 The new Doka climbing The ‘Formwork Show’ Doka
186 Deutsche Doka
formwork system is used put on at bauma 1989 sets
successfully in the building a new benchmark for the
The first subsidiary outside
of the Lüneburg ship lift. presentation of investment
Austria is established.
goods at trade-fairs.
2013
2012
20 08 2010 2011
20 04 20 06
19 98 20 00 2002
19 94 19 96
19 92
1988 19 90
1984 1986
1982
1978 19 80
1974 1976
1972
19 68 1970
19 64 19 66
19 62
1958 19 60
1954 1956
1952
19 48 19 50
4 19 46
Nearness
With high-performing capability all round the globe,
always near to you.
Enthusiasm
Jointly developing solutions with customers motivates us
to achieve peak performance.
Top performance
Building-structures are the visible result of a path that
has been followed jointly and with great determination.
Liesing residential
complex, Vienna
Austria
Systems in use:
▪ Framed formwork Framax Xlife
▪ Dokaflex 1-2-4
▪ Load-bearing tower Staxo 100
▪ Folding platform K
Systems in use:
▪ Large-area formwork Top 50
▪ Automatic climbing formwork SKE50 plus
▪ Automatic climbing formwork SKE100
▪ Protection screen Xclimb 60
Revolution Tower
Panama
Systems in use:
▪ Dokamatic table
Tverlandsbrua
Norway
Contractors: Reinertsen
Systems in use:
▪ Wall formwork FF20
▪ Large-area formwork Top 50
▪ Load-bearing tower Staxo 100
▪ Cantilever forming traveller (CFT)
▪ Bridge formwork ParaTop
Radfeld Tunnel
Austria
Contractors: Strabag
Systems in use:
▪ Large-area formwork Top 50
▪ Heavy-duty supporting system SL-1
Eemshaven
power station
Netherlands
Contractors: Mainka and Visser & Smit Bouw (VIMA VOF consortium)
Systems in use:
▪ Framed formwork Framax Xlife
▪ Guided climbing formwork Xclimb 60
▪ Dam formwork
▪ Load-bearing tower Staxo 100
▪ Edge protection system XP
Doka Services | 33
Project Development Stage
Finding cost-efficient solution scenarios
A solid basis
A precise definition of your project’s requirements provides the foundation for cost-efficient solution scenarios which are then
critical for the progress of the whole project. In this very early stage of the project, Doka delivers important information, so that you
Doka Services
benefit from good advice right from the outset.
Identifying challenges
Implementing a project begins with the planning and the bid invitation. As soon as the bid invitation has been successfully dealt
with, preparatory construction measures need to be taken, and the technical and business opportunities and risks have to be
assessed. A carefully planned project-development stage thus paves the way to the success of your project.
Doka Training
Doka Services
optimise your workflows in every stage of your project – for
efficiency at your site. Doka project support comprises:
¡¡ detailed identification of your needs
¡¡ advice and consulting on all business, technical and logisti-
cal issues regarding the formwork operations
¡¡ technically and economically customised formwork solutions
¡¡ the quality certainty that comes from working with a reliable
partner
Reference builds
Doka Seminars
Doka Special
Selecting the right formwork system is a key factor in obtaining a cost-effective construction workflow. With Doka, realistically and
precisely calculated prices, and careful attention to risks, are something you can take for granted.
Doka Services
Finalising the objectives
The project has been put out to tender and the client is expecting to receive bids for the specified works. Your job is now to draw
up bids that are ‘just right’ from both the technical and business standpoints. Doka helps you develop the solutions and deploy your
resources effectively.
Doka Services
guideline prices. Doka’s guideline prices are informed by the
experience of very many previous projects. This gives you
certainty and peace of mind when working out the costings for
your project, and the bid based on these:
¡¡ certainty when quoting prices
¡¡ saves time and resources in your operations scheduling
Rental Service
To meet the client’s expectation that work on the site will move ahead efficiently and safely, thorough and accurate planning is
required. Working with Doka means that you have a chosen a dependable, capable partner.
Doka Services
Experts you can rely on
In this stage of the project, Doka Services help to reduce the amount of planning work you have to carry out on your own, and help
you achieve realistic, feasible planning. This leads to fast, safe construction progress.
Site logistics
Tipos is a helpful, user-friendly software program from Doka, in The expert knowledge concentrated in the Doka Competence
eight languages, for planning the formwork on your site. The ‘Schal- Centres provides cost-effective comprehensive formwork
Igel’® on-screen assistant makes it quick and easy for you to enter solutions on technically demanding construction projects.
all the structure data and automatically form up the structure: Available worldwide in the following areas:
¡¡ cost-optimisation, by fast planning at the push of a button ¡¡ formwork pre-assembly
¡¡ greater reliability, by having accurate piece-lists that include all ¡¡ automatic climbing formwork
connectors and accessories ¡¡ tunnel formwork
¡¡ greater safety, as the program performs statical calculation ¡¡ cantilevering
at the same time: ¡¡ composite bridges
¡¡ cost-efficient planning on projects of longer duration ¡¡ power-station construction
The Doka formwork concept, complete with details of the Price calculation based on the bid planning is a dependable
underlying assumptions and stipulated boundary conditions, is basis for your jobsite costings:
presented in bid drawings – as the basis for your planning: ¡¡ detailed breakdown of the prices of the individual systems
¡¡ time-savings from accurate, detailed planning ¡¡ proportional breakdown of purchased vs. rented components
¡¡ detailed, practical visualisation of the offer ¡¡ time-savings from thorough preliminary cost planning
¡¡ processed by internationally experienced project technicians
Executing the construction work successfully calls for a great deal of co-ordination and precision. Although it is often difficult to
muster the resources needed for this, it is essential for the ‘bottom line’ of your project.
Doka Services
Keeping pace
Doka offers services to help you stay on schedule and conserve your resources. If there is any change in fundamental project
parameters, Doka experts will join you ‘in situ’ to help you adapt to these new challenges. This ensures that work at your site stays
on-track for success.
myDoka is the online platform for your project data. It gives you
anytime access to your latest inventory and transaction data,
so you can easily find all your important information. From
planning to evaluation, from the contract all the way through
to controlling – all your data are displayed at a glance, and are
always up-to-date. myDoka has a wide range of functions to
help you with your daily work and give you a quick overview of
your project:
¡¡ saves time and money by giving you fast access to real-time
data
¡¡ all key project data are clearly laid-out for you, at a glance
¡¡ user-friendly – the information you need is just a few clicks
away
¡¡ follow-up orders (rental or purchase) made easy by list of
formwork equipment supplied to date
Sign up at www.mydoka.com or get in touch with your Doka-
contact directly.
Doka Services
operations. Doka planning is carried out on an engineering
basis in accordance with the applicable Standards and rules.
To simplify implementation, bills of materials are drawn up
which will give you a good overview of all the products and
services:
¡¡ fast, optimised formwork operations
¡¡ accelerated workflow achieved by well-planned processes
Structure modelling
3D planning
Doka system formwork covers wide areas of formwork Shipping pre-assembled (custom) formwork elements requires
applications. Special factors or structural requirements and a great deal of knowledge regarding the correct way to load,
unusual shapes call for an individualised approach, however. pack, store and secure them. Doka has the necessary routine
This is where the Doka ‘Ready-to-Use’ Service comes in, and practice to optimise both these wide/abnormal loads and
‘tailor-making’ custom formwork units for you. By combining standard shipments. The Doka logistics experts have the right
Doka systems with custom-built solutions, this helps to achieve solution for you:
economically efficient construction workflows: ¡¡ items are delivered at the agreed time
¡¡ less assembly work needed at your site ¡¡ easy on-call delivery of formwork quantities
¡¡ faster workflows, as forming can be performed with precise- ¡¡ minimises the risk of damage and rectification work
fitting accuracy
¡¡ rapid forming progress, with improved concreting results
Doka Services
business or technical service directly on the site. This
facilitates optimum project progress:
¡¡ safe, dependable construction operations aided by ongoing
‘on-the-job’ planning
¡¡ detailed requirements can be clarified and co-ordinated
‘on the spot’
¡¡ direct contact between the client and Doka increases the
safety of the formwork application
Customer Service
Formwork co-ordination
Doka will facilitate your project and advise your site crew, even
over prolonged periods:
¡¡ optimum controlling of formwork resources and services
¡¡ time-savings from deploying the formwork efficiently
¡¡ the peace of mind that comes from having smooth
workflows on your site
After work has finished on the structure shell, it is important to get the site ready for the next stages in construction. Formwork
equipment that is no longer needed must be efficiently removed from the site to create space for the subsequent works. Safety is
Doka Services
improved many times over on an uncluttered, tidy site, minimising the risk of accidents and the associated costs.
Surpassing expectations
Preparing and checking the return deliveries so that these are handled smoothly and correctly often requires more resources. Doka
Services can offer precisely targeted assistance here, ensuring that you make the very best use of your resources in this Stage as
well.
Cleaning
Doka Services
to-Use Service centres. Any non-reusable formwork equipment
can be disposed of properly on request. In this way, you can
concentrate fully on your own core competences. Benefit from:
¡¡ professional dismantling
¡¡ efficient use of site resources
¡¡ improved site logistics
¡¡ shorter rental times
After a joint viewing of the rented equipment on the site or at We join with you to analyse the finished project. When doing
the branch, Doka draws up a return-delivery memo with you. this, we look at its technical planning and execution, as well
This is binding on both parties and gives exact information on as at the ‘bottom-line’ of the project in terms of pricing,
the quantity and the state of the equipment: equipment commissioning quantities, logistics and the quality
¡¡ reduced aftercosts of the processes:
¡¡ cost-savings from shorter rental durations ¡¡ finding and defining any scope for improvement on future
¡¡ your site crew are deployed more efficiently projects
¡¡ permitted bending moment M = 9.0 kNm ¡¡ extra-long lifespan, thanks to the proven ‘top’ beam-end
Save on equipment
thanks to optimised load capacity
Safety first.
With this symbol...
www.doka.com/safety
61
Timber formwork beams
The tried-and-tested components for many Doka formwork systems
Doka timber formwork beams are the basis for many Doka formwork systems and have a wide range of uses. Hundreds of
thousands of these carefully manufactured beams do sterling service on countless construction sites every day. The H20 top,
H20 eco and H16 beams are familiar names all over the world, and are the right choice for any application.
Doka beam H20 top N 1.80m 9.5 189011000 Doka beam H20 eco N 1.25m 6.3 189282000
Doka beam H20 top N 2.45m 12.8 189012000 Doka beam H20 eco N 12.00m 60.3 189288000
Doka beam H20 top N 2.65m 13.8 189013000 Doka-Träger H20 eco N
Doka beam H20 top N 2.90m 15.0 189014000 Varnished yellow
Doka beam H20 top N 3.30m 17.0 189015000
Doka beam H20 top N 3.60m 18.5 189016000
Doka beam H20 top N 3.90m 20.0 189017000
Doka beam H20 top N 4.50m 23.0 189018000
Doka beam H20 top N 4.90m 25.0 189019000
Doka beam H20 top N 5.90m 30.0 189020000
Doka beam H20 top N .....m 5.2 189010000
Doka beam H20 top N .....m BS 5.2 189021000
Doka-Träger H20 top N
Varnished yellow
All-round plastic edge protector with raised sheet-corners for High numbers of repeat uses and even, uniform concrete
Low costs-per-use and top-quality concreting results thanks Visually appealing concrete faces with a board-type surface
to choice timber quality, high format accuracy and high-grade structure and a ribbed finish, achieved by the brushed surface
surface coating. with recessed grooves (V-groove centres: 125 mm, V-groove
width: 6.5 mm, V-groove depth: 3 mm) and high-quality
varnish sealant.
Doka formwork sheet 3-SO 21mm 100/50cm 5.3 186007000 Doka texture sheet 3-SO 21mm 250/50cm 13.1 184034000
Doka formwork sheet 3-SO 21mm 150/50cm 7.9 186008000 Doka texture sheet 3-SO 21mm 300/50cm 15.8 184035000
Doka formwork sheet 3-SO 21mm 200/50cm 10.5 186009000 Doka texture sheet 3-SO 21mm 400/50cm 21.0 184037000
Doka formwork sheet 3-SO 21mm 250/50cm 13.1 186011000 Doka texture sheet 3-SO 21mm 500/50cm 26.3 184039000
Doka formwork sheet 3-SO 21mm 300/50cm 15.8 186012000 Doka texture sheet 3-SO 21mm 600/50cm 31.5 184041000
Doka formwork sheet 3-SO 21mm 350/50cm 18.4 186028000 Doka texture sheet 3-SO 21mm 250/100cm 26.3 184001000
Doka formwork sheet 3-SO 21mm 400/50cm 21.0 186013000 Doka texture sheet 3-SO 21mm 300/100cm 31.5 184002000
Doka formwork sheet 3-SO 21mm 450/50cm 23.6 186029000 Doka texture sheet 3-SO 21mm 400/100cm 42.0 184003000
Doka formwork sheet 3-SO 21mm 500/50cm 26.3 186014000 Doka texture sheet 3-SO 21mm 500/100cm 52.5 184004000
Doka formwork sheet 3-SO 21mm 550/50cm 28.9 186023000 Doka texture sheet 3-SO 21mm 600/100cm 63.0 184005000
Doka formwork sheet 3-SO 21mm 600/50cm 31.5 186027000 Doka-Strukturplatte 3-SO 21mm
Doka formwork sheet 3-SO 21mm 100/100cm 10.5 186015000
Doka formwork sheet 3-SO 21mm 150/100cm 15.8 186016000
Doka formwork sheet 3-SO 21mm 200/100cm 21.0 186017000 Doka texture sheet 3-SO 27mm 250/50cm 16.3 184084000
Doka formwork sheet 3-SO 21mm 250/100cm 26.3 186018000 Doka texture sheet 3-SO 27mm 300/50cm 19.5 184085000
Doka formwork sheet 3-SO 21mm 300/100cm 31.5 186019000 Doka texture sheet 3-SO 27mm 500/50cm 32.5 184090000
Doka formwork sheet 3-SO 21mm 350/100cm 36.8 186030000 Doka texture sheet 3-SO 27mm 600/50cm 39.0 184092000
Doka formwork sheet 3-SO 21mm 400/100cm 42.0 186020000 Doka texture sheet 3-SO 27mm 250/100cm 32.5 184071000
Doka formwork sheet 3-SO 21mm 450/100cm 47.3 186031000 Doka texture sheet 3-SO 27mm 300/100cm 39.0 184072000
Doka formwork sheet 3-SO 21mm 500/100cm 52.5 186021000 Doka texture sheet 3-SO 27mm 500/100cm 65.0 184074000
Doka formwork sheet 3-SO 21mm 550/100cm 57.8 186022000 Doka texture sheet 3-SO 27mm 600/100cm 78.0 184075000
Doka formwork sheet 3-SO 21mm 600/100cm 63.0 186024000 Doka-Strukturplatte 3-SO 27mm
Doka formwork sheet 3-SO 21mm 250/125cm 32.8 186097000
Doka formwork sheet 3-SO 21mm 300/150cm 47.3 186098000
Doka formwork sheet 3-SO 21mm 600/150cm 94.5 186099000
Doka formwork sheet 3-SO 21mm 150/50cm BS 7.9 186008100 ProFrame panel 21mm 200/50cm 11.0 186118000
Doka formwork sheet 3-SO 21mm 200/50cm BS 10.5 186009100 ProFrame panel 21mm 200/50cm BS 11.0 186118100
Doka formwork sheet 3-SO 21mm 250/50cm BS 13.1 186011100 ProFrame panel 21mm 250/50cm 13.8 186117000
Doka formwork sheet 3-SO 21mm 300/50cm BS 15.8 186012100 ProFrame panel 21mm 250/50cm BS 13.8 186117100
Doka-Schalungsplatte 3-SO 21mm ProFrame-Paneel 21
Doka formwork sheet 3-SO 27mm 100/50cm 6.5 187007000 ProFrame panel 27mm 200/50cm 13.5 187178000
Doka formwork sheet 3-SO 27mm 150/50cm 9.8 187008000 ProFrame panel 27mm 200/50cm BS 13.5 187178100
Doka formwork sheet 3-SO 27mm 200/50cm 13.0 187009000 ProFrame panel 27mm 250/50cm 16.9 187177000
Doka formwork sheet 3-SO 27mm 250/50cm 16.3 187011000 ProFrame panel 27mm 250/50cm BS 16.9 187177100
ProFrame-Paneel 27
Doka formwork sheet 3-SO 27mm 300/50cm 19.5 187012000
Doka formwork sheet 3-SO 27mm 350/50cm 22.8 187028000
Doka formwork sheet 3-SO 27mm 400/50cm 26.0 187013000
Doka formwork sheet 3-SO 27mm 450/50cm 29.3 187029000 Doka formwork sheet 3-S plus 21mm 9.7/200cm 2.0 186109000
Doka formwork sheet 3-SO 27mm 500/50cm 32.5 187014000 Doka formwork sheet 3-S plus 21mm 9.7/250cm 2.5 186110000
Doka formwork sheet 3-SO 27mm 550/50cm 35.8 187023000 Doka formwork sheet 3-S plus 21mm 20/200cm 4.2 186107000
Doka formwork sheet 3-SO 27mm 600/50cm 39.0 187027000 Doka formwork sheet 3-S plus 21mm 20/250cm 5.3 186108000
Doka formwork sheet 3-SO 27mm 100/100cm 13.0 187015000 Doka formwork sheet 3-S plus 21mm 40/200cm 8.4 186111000
Doka formwork sheet 3-SO 27mm 150/100cm 19.5 187016000 Doka formwork sheet 3-S plus 21mm 40/250cm 10.5 186112000
Doka formwork sheet 3-SO 27mm 200/100cm 26.0 187017000 Doka formwork sheet 3-S plus 21mm 50/200cm 10.5 186101000
Doka formwork sheet 3-SO 27mm 250/100cm 32.5 187018000 Doka formwork sheet 3-S plus 21mm 50/250cm 13.1 186102000
Doka formwork sheet 3-SO 27mm 300/100cm 39.0 187019000 Doka-Schalungsplatte 3-S plus 21mm
Doka formwork sheet 3-SO 27mm 350/100cm 45.5 187030000
Doka formwork sheet 3-SO 27mm 400/100cm 52.0 187020000
Doka formwork sheet 3-SO 27mm 450/100cm 58.5 187031000 Doka formwork sheet 3-S plus 27mm 9.7/200cm 2.5 187052000
Doka formwork sheet 3-SO 27mm 500/100cm 65.0 187021000 Doka formwork sheet 3-S plus 27mm 9.7/250cm 3.1 187053000
Doka formwork sheet 3-SO 27mm 550/100cm 71.5 187022000 Doka formwork sheet 3-S plus 27mm 20/200cm 5.2 187050000
Doka formwork sheet 3-SO 27mm 600/100cm 78.0 187024000 Doka formwork sheet 3-S plus 27mm 20/250cm 6.5 187051000
Doka formwork sheet 3-SO 27mm 250/125cm 40.6 187106000 Doka formwork sheet 3-S plus 27mm 40/200cm 10.4 187067000
Doka formwork sheet 3-SO 27mm 300/150cm 58.5 187107000 Doka formwork sheet 3-S plus 27mm 40/250cm 13.0 187068000
Doka formwork sheet 3-SO 27mm 600/150cm 117.0 187108000 Doka formwork sheet 3-S plus 27mm 50/200cm 13.0 187054000
Doka formwork sheet 3-SO 27mm 150/50cm BS 9.8 187008100 Doka formwork sheet 3-S plus 27mm 50/250cm 16.3 187055000
Doka formwork sheet 3-SO 27mm 200/50cm BS 13.0 187009100 Doka-Schalungsplatte 3-S plus 27mm
Doka formwork sheet 3-SO 27mm 250/50cm BS 16.3 187011100
Doka formwork sheet 3-SO 27mm 300/50cm BS 19.5 187012100
Doka-Schalungsplatte 3-SO 27mm
Raw sheet 3-S 31mm 300/150cm 68.9 177042000
Raw sheet 3-S 38mm 300/150cm 86.0 177043000
Rohplatte 3-S
Doka formwork sheet 3-S eco 21mm 50/150cm 7.9 186090000
Doka formwork sheet 3-S eco 21mm 50/200cm 10.5 186091000
Doka formwork sheet 3-S eco 21mm 50/250cm 13.1 186092000
Doka formwork sheet 3-S eco 21mm 50/300cm 15.8 186093000
Doka formwork sheet 3-S eco 21mm 50/200cm BS 10.5 186091100
Doka formwork sheet 3-S eco 21mm 50/250cm BS 13.1 186092100
Doka-Schalungsplatte 3-S eco 21mm
Product Finder.
Visitors to doka.com
don’t so much
www.doka.com/products
69
Formwork sheets
Multi-ply formwork sheets: for smooth concrete faces
Doka multi-ply formwork sheets are used in very many Doka formwork systems. The broad spectrum – ranging from DokaPly to the
Xlife sheet – allows Doka to offer ideal solutions for many different requirements and cater for anything from infill zones to fair-faced
concrete.
Broadcasting
ourselves.
You’ll find all the
www.youtube.com/doka
73
Release-agents
The right release-agent for every application
Doka offers release-agents for both smooth and absorbent formwork surfaces. They have an excellent separating effect and make
for attractive concrete surfaces.
Doka-OptiX Doka-Trenn
The release-agent specially designed for smooth form-facings The universal release-agent for absorbent formwork surfaces
¡¡ easy to apply – is simply sprayed on with no need to wipe ¡¡ excellent separating effect makes formwork easy to detach
Top projects –
worldwide.
Use Google Maps to
www.doka.com/topprojects
77
Floor props
Play a vital ‘supporting role’ on every site
Doka floor props are the right choice for every usage situation, and a sturdy ‘support’ in the rough-and-tumble of everyday work on
the site. The anti-handtrap and anti-dropout safeguard, forged nut, galvanised finish and ergonomically shaped fastening clamp are
just a few of the features of these premium tubular steel props that have convinced customers all over the world.
¡¡ long-lived, due to impact protector ¡¡ sturdy floor prop with a load capacity of 60 kN up to a height
(A) anti-handtrap and anti-dropout safeguard; (B) forged nut; (C) galvanised finish; (D) ergonomical fastening clamp
Doka floor prop Eurex 20 top 150 8.0 586096000 Doka floor prop Eco 20 250 11.7 586134000
Length: 92 - 150 cm Length: 152 - 250 cm
Doka floor prop Eurex 20 top 250 12.7 586086400 Doka floor prop Eco 20 300 13.0 586135000
Length: 148 - 250 cm Length: 172 - 300 cm
Doka floor prop Eurex 20 top 300 14.3 586087400 Doka floor prop Eco 20 350 15.3 586136000
Length: 173 - 300 cm Length: 197 - 350 cm
Doka floor prop Eurex 20 top 350 17.4 586088400 Doka floor prop Eco 20 400 19.1 586137000
Length: 198 - 350 cm Length: 227 - 400 cm
Doka floor prop Eurex 20 top 400 21.6 586089400 Doka-Deckenstütze Eco 20
Length: 223 - 400 cm Galvanised
Doka floor prop Eurex 20 top 550 32.3 586090400
Length: 298 - 550 cm
Doka floor prop Eurex 20 top 700 48.0 586139000
Length: 383 - 700 cm
Doka-Deckenstütze Eurex 20 top
Galvanised
Service Finder.
Visitors to doka.com
don’t so much
www.doka.com/services
81
Plumbing accessories
The tried-and-tested struts for plumbing and securing Doka formwork systems
Doka panel struts and plumbing struts windproof the formwork and make it easier to plumb and align. The modular combination of
plumbing struts, prop heads and prop shoes makes for optimum usability with Doka formwork systems.
¡¡ wind forces are safely transferred, thanks to optimised load ¡¡ rugged build and galvanised surfaces make for high
Panel strut 340 IB 24.3 580365000 Plumbing strut 340 IB 16.7 588696000
Elementstütze 340 IB Justierstütze 340 IB
consisting of: Galvanised
(A) Plumbing strut 340 IB 16.7 588696000 Length: 190.8 - 341.8 cm
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Galvanised
Delivery condition: folded closed
Eurex 60 550
Eurex 60 550
depending on length, comprising:
(A) Plumbing strut Eurex 60 550 42.5 582658000
Powder-coated, blue
Aluminium
Length: 343 - 553 cm
(B) Extension Eurex 60 2.00m 21.3 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Coupler Eurex 60 8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
(D) Connector Eurex 60 IB 4.2 582657500
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
(E) Plumbing strut shoe Eurex 60 EB 8.0 582660500
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
(F) Adjusting strut 540 Eurex 60 IB 27.8 582659500
Galvanised
Length: 303.5 - 542.2 cm
Delivery condition: separate parts
D
Good news.
In the Newsroom,
Doka keeps you in-
www.doka.com/news
87
Form-ties and suspension cones
Safe tying and anchoring technology for all formwork tasks
Dependable form-ties and safe suspension points are crucial for efficient and safe usage of any formwork. For both wall formwork,
single-sided formwork and climbing formwork, a complete range of field-proven form-tie solutions and suspension points is
available.
Tie rod system 15.0 Top50 form-tie nut 15.0 3.8 580073000
Top50-Ankermutter 15,0
Galvanised
Tie rod 15.0mm galvanised 0.50m 0.72 581821000
Tie rod 15.0mm galvanised 0.75m 1.1 581822000 Height: 25 cm
Tie rod 15.0mm galvanised 1.00m 1.4 581823000
Tie rod 15.0mm galvanised 1.25m 1.8 581826000
Tie rod 15.0mm galvanised 1.50m 2.2 581827000
Tie rod 15.0mm galvanised 1.75m 2.5 581828000
Tie rod 15.0mm galvanised 2.00m 2.9 581829000
Tie rod 15.0mm galvanised 2.50m 3.6 581852000
Tie rod 15.0mm galvanised .....m 1.4 581824000
Tie rod 15.0mm non-treated 0.50m 0.73 581870000 Fixing plate 15.0 0.15 581692000
Tie rod 15.0mm non-treated 0.75m 1.1 581871000 Nagelblech 15,0
Tie rod 15.0mm non-treated 1.00m 1.4 581874000 Galvanised
Tie rod 15.0mm non-treated 1.25m 1.8 581886000 Diameter: 10 cm
Tie rod 15.0mm non-treated 1.50m 2.1 581876000
Tie rod 15.0mm non-treated 1.75m 2.5 581887000
Tie rod 15.0mm non-treated 2.00m 2.9 581875000
Tie rod 15.0mm non-treated 2.50m 3.6 581877000
Tie rod 15.0mm non-treated 3.00m 4.3 581878000 Positioning cone 15.0 5cm 0.43 581969000
Tie rod 15.0mm non-treated 3.50m 5.0 581888000 Vorlaufkonus 15,0 5cm
Tie rod 15.0mm non-treated 4.00m 5.7 581879000 Galvanised
Tie rod 15.0mm non-treated 5.00m 7.2 581880000 Length: 11 cm
Tie rod 15.0mm non-treated 6.00m 8.6 581881000 Diameter: 3 cm
Tie rod 15.0mm non-treated 7.50m 10.7 581882000
Tie rod 15.0mm non-treated .....m 1.4 581873000 Tool: Positioning cone spanner 15.0
Ankerstab 15,0mm DK
Follow fitting instructions!
Angle anchor plate 12/18 1.5 581934000 Sealing sleeve S 15.0 5cm 0.009 581697000
Winkelplatte 12/18 Dichtungshülse S 15,0 5cm
Galvanised Orange
Length: 11 cm
Diameter: 4.7 cm
Fair-faced concrete positioning cone 15.0 5cm 0.46 581973000 Fair-faced concrete positioning cone MF 15.0 1.5 581928000
Sichtbetonvorlauf 15,0 5cm Sichtbetonvorlauf MF 15,0
Galvanised Galvanised
Length: 11 cm Length: 12.6 cm
Diameter: 4.3 cm Diameter: 5.3 cm
Tool: Positioning cone spanner 15.0 Tool: Spanner for universal climbing
DK cone 15.0/20.0
Suspension cone 15.0 5cm 0.88 581971000 Positioning disk M30 0.25 581975000
Aufhängekonus 15,0 5cm Vorlaufscheibe M30
Galvanised Galvanised
Length: 16 cm Diameter: 9 cm
Diameter: 6 cm
Follow fitting instructions!
Stop anchor 15.0 40cm 0.71 581999000 Water stop 15.0 33cm 1.3 581817000
Sperranker 15,0 40cm Water stop S 15.0 33cm 1.2 581819000
Non-treated Wassersperre 15,0
Non-treated
Length: 33 cm
Diameter: 7 cm
Custom lengths can be ordered un-
der the special-component Art.n°
580100000, quoting the designation
and the desired length in mm.
Stop anchor double-ended 15.0 20cm 0.76 581820000
Sperranker beidseitig 15,0 20cm Water stop G 15.0 33cm 0.68 581818000
Non-treated Wassersperre G 15,0 33cm
Non-treated
Custom lengths can be ordered un-
der the special-component Art.n° Length: 33 cm
580100000, quoting the designation Width: 12 cm
and the desired length in mm. Height: 12 cm
Custom lengths can be ordered un-
Pigtail anchor 15.0 0.92 581984000 der the special-component Art.n°
Wellenanker 15,0 580100000, quoting the designation
Non-treated and the desired length in mm.
Length: 67 cm
Fibre concrete plug 30.7mm 0.03 581902000
Fibre concrete plug 32mm 0.02 581830000
Fibre concrete plug 45mm 0.10 581438000
Fibre concrete plug 54mm 0.16 581955000
Faserbetonstopfen
Grey
Wall anchor 15.0 15cm 1.5 581893000
Wandanker 15,0 15cm
Galvanised
Universal cone 22mm 0.005 581995000 Clearance cone 15.0 0.51 581865000
Universal-Konus 22mm Freistellkonus 15,0
Grey Black
Diameter: 4 cm Blue
Length: 20.6 cm
Diameter: 7 cm
Follow fitting instructions!
Plug 22mm 0.003 581953000
Verschlussstopfen 22mm Clearance-cone dismantling tool 0.67 581864000
Grey Lösewerkzeug Freistellkonus
Galvanised
Length: 10.7 cm
Width-across: 24 mm
Tie rod system 20.0 Top100 tec form-tie nut 20.0 4.8 586934000
Top100 tec-Ankermutter 20,0
Galvanised
Tie rod 20.0mm galvanised 0.50m 1.3 581411000
Tie rod 20.0mm galvanised 0.75m 1.9 581417000 Height: 25 cm
Tie rod 20.0mm galvanised 1.00m 2.5 581412000
Tie rod 20.0mm galvanised 1.25m 3.2 581418000
Tie rod 20.0mm galvanised 1.50m 3.8 581413000
Tie rod 20.0mm galvanised 2.00m 5.0 581414000
Tie rod 20.0mm galvanised .....m 2.5 581410000
Tie rod 20.0mm non-treated 0.50m 1.3 581405000
Tie rod 20.0mm non-treated 0.75m 1.9 581416000
Tie rod 20.0mm non-treated 1.00m 2.5 581406000 Quick-release nut 20.0 5.9 581428000
Tie rod 20.0mm non-treated 1.50m 3.8 581407000 Lösemutter 20,0
Tie rod 20.0mm non-treated 2.00m 5.0 581408000 Galvanised
Tie rod 20.0mm non-treated .....m 2.5 581403000 Length: 22 cm
Ankerstab 20,0mm
Follow fitting instructions!
Sealing sleeve K 20.0 0.03 581443000 Stop anchor 20.0 40cm 1.2 581458000
Dichtungshülse K 20,0 Sperranker 20,0 40cm
yellow-green Non-treated
Length: 12 cm
Diameter: 6 cm
Tie rod wrench 15.0/20.0 1.9 580594000 Hexagon nut 26.5 0.73 581985000
Ankerstabschlüssel 15,0/20,0 Sechskantmutter 26,5
Galvanised Galvanised
Length: 37 cm Length: 8 cm
Diameter: 8 cm Width-across: 46 mm
Concrete cone 52mm 0.19 581939000 Square spanner 32.0 5.3 582918000
Betonkonus 52mm Vierkantschlüssel 32,0
Grey Galvanised
Length: 59 cm
Doka multi-trip transport box 1.20x0.80m 75.0 583011000 Doka stacking pallet 1.20x0.80m 39.5 583016000
Doka-Mehrwegcontainer 1,20x0,80m Doka-Stapelpalette 1,20x0,80m
Galvanised Galvanised
Height: 78 cm Height: 77 cm
Follow the directions in the "Operat- Follow the directions in the "Operat-
ing Instructions"! ing Instructions"!
Dokadek panel pallet 0.81x2.44m 67.1 586524000 Staxo 40 pallet 1.20/0.90m 38.5 582238000
Dokadek-Elementpalette 0,81x2,44m Staxo 40-Palette 1,20/0,90m
Galvanised Galvanised
Height: 26 cm Length: 169 cm
Width: 91 cm
Height: 27 cm
Fast, efficient forming up and stripping out Saves time, saves on equipment
as it so user-friendly and easy to handle thanks to its indestructible, site-ready build
App-solutely
innovative.
Experience
www.doka.com/apps
105
Formwork accessories
Sealings for fair-faced concrete – for perfect concrete surfaces down to the last detail
Reliably casting concrete surfaces in the desired fair-faced concrete category is quite a challenge, every time. Doka has the
right formwork equipment for all building-work where the surface of the concrete is intended to be a visual element. For perfect
outcomes, even on details such as form-tie points and joins, Doka can offer a large number of different accessories for fair-faced
concrete.
Doka System Components | Formwork accessories | Sealings for fair-faced concrete | 107
Article list
[kg] Article n° [kg] Article n°
Doka System
Sealings for fair-faced
Components
concrete
Fair-faced concrete distance piece 20cm 0.05 581843000 Doka fair-faced concrete start-up gear 0.78 581849000
Fair-faced concrete distance piece 25cm 0.06 581844000 Doka Sichtbeton-Startpaket
Fair-faced concrete distance piece 30cm 0.07 581845000
Sichtbeton-Distanzhalter
Grey
108 | Sealings for fair-faced concrete | Formwork accessories | Doka System Components
The Formwork Experts.
Residential,
highrise, bridges,
tunnels, power
www.doka.com/topprojects
109
Doka Wall Systems
The right solution for every requirement
Doka offers a wide range of proven wall formwork systems for all jobsite situations, all fields of
use, and all specifications regarding the concrete finish.
¡¡ high numbers of repeat uses made possible by its excellent ¡¡ clean concrete finish from the high-grade Xlife sheet with its
manufacturing quality and extra-durable Xlife-sheet plastic-enhanced surface
¡¡ smaller number of (expensive) closure zones, due to the ¡¡ the ingeniously co-ordinated panel size-grid permits a neat
consistent 15 cm increment grid joint pattern even when combining upright and horizontal
¡¡ the widely spaced form-ties (1.35 m apart) save up to panels
twelve percent of the costs for ties and finishing-work on ¡¡ no screw imprints in the concrete, as the formwork sheet is
tie-holes screwed on from the rear
¡¡ galvanised, powder-coated steel frame, for long lifespan ¡¡ the neat negative frame-imprints in the concrete minimise
¡¡ compact gang-forms mean less crane time is required any finishing-work
¡¡ using the single-side-operable tying system Monotec opti-
GSV tested
Permissible fresh-concrete pressure: 80 kN/m²
Xlife sheet
Platform system Xsafe plus
Edge protection system XP
Ladder system XS
Working scaffold Modul
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 113
System
Framax Xlife 30 45 60 90 135
330
heights, simplifies planning, forming and logistics on the site
¡¡ the frames come with practical cross boreholes that simplify
270
work on stop-ends, corners and columns
¡¡ stable galvanised powder-coated steel frames ensure plane
135
concrete surfaces
114 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
240 Framax extra-large panels
The Framax stripping corner I was designed specifically for use with shaft formwork. It enables the formwork to be closed and
opened in accordance with accident protection regulations, i.e. without using the crane, simply by operating easy-to-turn spindles
with a reinforcement rod or the convenient ratchet. It is then lifted and reset in one piece, thus saving crane-time. The Framax
stripping corner I is also suitable for use on pilasters and as an inside corner on wall formwork.
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 115
Closures
For operating the lifting hook safely from ground level, for
plumbing and aligning the formwork and for pulling out double-
headed nails.
116 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Tying
57,5
135
Only two different types of conical Monotec tie are needed for
economically forming wall thicknesses of between 15 cm and
35 cm.
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 117
Utilisation
Integrated waling system
Joining
Vertical stacking
End-shuttering
118 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Corners and junctions
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 119
References
The wide form-tie spacing,
of 1.35 m, and the large
gang-forms together reduce
the forming-times for large
areas to a minimum.
120 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
Rectangular and square CIP
columns can be formed at
top speed with equipment
that will in any case be avail-
able on the site. Only four
universal panels are needed
to achieve column cross-
sections of up to 105 cm
x 105 cm, in a 5 cm grid.
The sturdy frames permit
fresh-concrete pressures of
up to 90 kN/m², allowing the
formwork to be filled at high
speed.
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 121
Article list
[kg] Article n° [kg] Article n°
Doka Wall
Framed formwork
Systems
Framax Xlife
Framax Xlife panel 1.35x2.70m 210.0 588100500 Framax Xlife panel 2.70x2.70m 416.0 588109500
Framax Xlife panel 0.90x2.70m 126.5 588102500 Framax Xlife panel 2.70x3.30m 514.2 588608500
Framax Xlife panel 0.60x2.70m 91.5 588104500 Framax Xlife-Element 2,70m
Framax Xlife panel 0.45x2.70m 77.7 588106500 Galvanised
Framax Xlife panel 0.30x2.70m 61.5 588108500
Framax Xlife panel 1.35x1.35m 106.3 588110500
Framax Xlife panel 0.90x1.35m 68.5 588112500
Framax Xlife panel 0.60x1.35m 50.5 588114500
Framax Xlife panel 0.45x1.35m 41.0 588116500
Framax Xlife panel 0.30x1.35m 31.8 588118500
Framax Xlife panel 1.35x3.30m 259.3 588221500
Framax Xlife panel 0.90x3.30m 154.5 588222500
Framax Xlife panel 0.60x3.30m 114.7 588223500
Framax Xlife panel 0.45x3.30m 97.9 588224500
Framax Xlife panel 0.30x3.30m 78.5 588225500
Framax Xlife-Element
Galvanised, powder-coated
Custom sizes on enquiry!
122 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Framax hose to panel coupler SCC 10.0 588121000 Framax hinged outside corner A galv. 2.70m 52.8 588942000
Framax-Spindelaufsatz SCC Framax hinged outside corner A galv. 1.35m 27.5 588943000
Galvanised Framax-Scharnierecke A verzinkt
Length: 48 cm Galvanised, powder-coated
Diameter: 27 cm
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 123
[kg] Article n° [kg] Article n°
Extension set Framax stripping spindle I 0.90 588947000 Framax pressure plate 6/15 0.80 588183000
Erweiterungsset Framax Ausschalspindel I Framax-Druckplatte 6/15
Galvanised Galvanised
Height: 2.5 cm
Dismantling tool Framax stripping spindle I 4.5 588948000 Framax universal waling 0.60m 6.6 588689000
Lösewerkzeug Framax Ausschalspindel I
Framax universal waling 0.90m 10.6 588150000
Galvanised
Framax universal waling 1.50m 16.8 588148000
Height: 27.5 cm Framax-Klemmschiene
Painted blue
Framax multi function clamp 5.8 588169000 Framax wedge clamp 1.5 588152000
Framax-Uni-Spanner Framax-Spannklemme
Galvanised Galvanised
Length: 40 cm Length: 21 cm
Framax adjustable clamp 5.3 588168000 Framax tensioning wedge R 0.20 588155000
Framax-Ausgleichsspanner Framax-Spannkeil R
Galvanised Galvanised
Length: 48 cm Height: 11 cm
B
Framax stop-end tie 1.5 588143000
Framax-Stirnanker
Galvanised
Length: 29 cm
124 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 125
[kg] Article n° [kg] Article n°
Doka express anchor 16x125mm 0.31 588631000 Framax pouring platform O 1.25/2.70m 117.0 588360000
Doka-Expressanker 16x125mm Framax-Betonierbühne O 1,25/2,70m
Galvanised Timber parts varnished yellow
Length: 18 cm Steel parts galvanised
Follow fitting instructions! Delivery condition: folded closed
126 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Framax transport gear 13.3 588232000 Framax steel closure plate 5cm 2.70m 14.0 588273000
Framax-Transportgehänge Framax steel closure plate 5cm 1.35m 7.9 588272000
Galvanised Framax steel closure plate 5cm 3.30m 17.2 588274000
Follow the directions in the "Operat- Framax-Stahlausgleich
ing Instructions"! Powder-coated, blue
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 127
[kg] Article n° [kg] Article n°
A
I
B
Universal plug R20/25 0.003 588180000
Kombi Ankerstopfen R20/25
Blue
J
Diameter: 3 cm M
L
Framax plug R24.5 0.003 588181000 Doka personal fall-arrest set 3.6 583022000
Framax-Abdeckstopfen R24,5 Doka-Sicherheitsgeschirr
Yellow Follow the directions in the "Operat-
Diameter: 2 cm ing Instructions"!
Double scraper Xlife 100/150mm 1.40m 2.8 588674000 Monotec tie 15.0 15-25cm Framax 3.9 588930000
Doppelschaber Xlife 100/150mm 1,40m Monotec tie 15.0 25-35cm Framax 4.2 588931000
Monotec-Anker 15,0 Framax
128 | Framed formwork Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Doka Wall Systems | Framed formwork | Framed formwork Framax Xlife | 129
Framed formwork Frami Xlife
The crane-independent manhandled steel-framed formwork for foundations, walls
and columns
The lightweight Frami Xlife formwork, with its sturdy hot-dip galvanised steel frame, is ideal for fast and economical forming, with or
without a crane.
¡¡ handy steel-framed formwork for foundations, walls and ¡¡ clean concrete finish from the high-grade Xlife sheet with its
columns plastic-enhanced surface
¡¡ easy to manhandle, yet sturdy enough for large-area ¡¡ the ingeniously co-ordinated panel formats permit a neat
forming, also with a low-load crane joint pattern even when combining upright and horizontal
¡¡ its wide range of different tying options shortens forming- panels
times ¡¡ the high-load-capacity formwork sheet and statically
¡¡ its self-aligning panel connectors mean that no extra optimised frame profile facilitate plane concrete surfaces
stiffening reinforcements are required ¡¡ the neat negative frame-imprints in the concrete minimise
any finishing-work
¡¡ high numbers of repeat uses made possible by its excellent ¡¡ safe vertical access with the Ladder system XS
manufacturing quality and extra-durable Xlife-sheet ¡¡ workplace safety on all sides with the Frami pouring platform
¡¡ extensive safety and workplace accessories such as ¡¡ practical accessories – such as panel struts, lifting hook etc.
plumbing accessories, working platforms and self-aligning – make for safe, easy handling of the formwork
panel connectors
¡¡ smaller number of (expensive) closure zones, due to the
consistent 15 cm increment grid
¡¡ efficient forming of shafts aided by seamless connection to
Framax stripping corner I
¡¡ long lifespan achieved by quality hot-dip galvanised steel
frame
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife | 131
System
Logical system grid 30 45 60 75 90
300
increments, for optimum adaptability to the structure
270
¡¡ 75 cm or 90 cm wide Universal panels with hole grids for
150
stop-ends, outside corners and columns
120
¡¡ larger gang-forms can be stiffened with aligning clamps or
universal walings, allowing them to be repositioned quickly
and easily by crane
Frami clamp
132 | Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
The Frami Xlife universal panels Obtuse and acute-angled corners are With its 15 cm clamping range, the Frami
permit right-angled corners up to wall formed using the galvanised Frami hinged adjustable clamp exactly matches the
thicknesses of 60 cm, in a 5 cm grid. inside corners. panel size-grid. This means that only one
closure is needed per wall plane.
The Frami anchoring bracket relocates Foundation anchoring system consisting The bottom of the panel is fixed by
the top form-tie above the panel, which of a flat tie-rod and a foundation clamp, foundation clamps and by a perforated
makes it easier to strike off the concrete. for wall thicknesses of between 10 cm tape with a 5 cm grid.
and 80 cm in a 5 cm grid – without any
ties placed through the concrete and
without any supporting timbers.
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife | 133
Utilisation
Polygonal circular formwork
111,5
300
270
130
111,5
45
38,5
The panels’ robust Only three form-ties are An extensive range of ac- The special hole-grid of
constructional design and needed per 300 cm height cessories ensures safety the 75 cm and 90 cm wide
asymmetrically arranged of panel. during pouring, even for Frami Xlife universal panels
form-ties allow even 270 cm room heights of 2.70 m or makes them suitable for
high panels to sustain the 3.00 m that are poured in economical forming of stop-
full hydrostatic concrete one continuous operation. ends, outside corners and
pressure. columns.
134 | Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
Foundations
Placed on their sides, Frami Xlife panels are ideal for cost-
saving forming of foundations.
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife | 135
Article list
[kg] Article n° [kg] Article n°
Doka Wall
Framed formwork
Systems
Frami Xlife
Frami Xlife panel 0.90x1.20m 39.0 588401500 Frami anchoring panel 0.60x1.20m 32.1 588403000
Frami Xlife panel 0.75x1.20m 33.5 588447500 Frami anchoring panel 0.60x1.50m 37.8 588408000
Frami Xlife panel 0.60x1.20m 29.5 588463500 Frami-Ankerelement
Frami Xlife panel 0.45x1.20m 24.0 588404500 Galvanised
Frami Xlife panel 0.30x1.20m 19.5 588405500 Corners marked in green
Frami Xlife panel 0.90x1.50m 46.5 588406500
Frami Xlife panel 0.75x1.50m 41.3 588448500
Frami Xlife panel 0.60x1.50m 35.5 588464500
Frami Xlife panel 0.45x1.50m 28.9 588409500
Frami Xlife panel 0.30x1.50m 24.8 588410500
Frami Xlife panel 0.90x2.70m 79.2 588481500
Frami Xlife panel 0.75x2.70m 69.5 588449500
Frami Xlife panel 0.60x2.70m 60.5 588465500 Frami inside corner 1.20m 20cm 25.3 588471000
Frami Xlife panel 0.45x2.70m 49.5 588482500 Frami inside corner 1.50m 20cm 30.7 588472000
Frami Xlife panel 0.30x2.70m 40.3 588483500 Frami inside corner 2.70m 20cm 51.6 588485000
Frami Xlife panel 0.90x3.00m 86.5 588411500 Frami inside corner 3.00m 20cm 57.4 588417000
Frami Xlife panel 0.75x3.00m 76.5 588412500 Frami-Innenecke
Frami Xlife panel 0.60x3.00m 65.0 588413500 Galvanised
Frami Xlife panel 0.45x3.00m 54.3 588414500
Frami Xlife panel 0.30x3.00m 45.0 588415500
Frami Xlife-Element
Galvanised
Custom sizes on enquiry!
136 | Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Frami circular forming plate 0.20x1.50m 21.5 588486000 Framax stripping spindle I 3.2 588618000
Frami circular forming plate 0.25x1.50m 22.5 588487000 Framax-Ausschalspindel I
Frami circular forming plate 0.30x1.50m 23.5 588488000 Galvanised
Frami-Bogenblech Height: 25 cm
Powder-coated, blue
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife | 137
[kg] Article n° [kg] Article n°
Frami aligning clamp 3.2 588435000 Plumbing strut 260 IB 12.8 588437500
Frami-Richtspanner Justierstütze 260 IB
Galvanised Galvanised
Length: 62 cm Length: 146.8 - 256.7 cm
138 | Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Scaffold tube connection 0.27 584375000 Frami flat tie-rod 10-80cm 2.1 588475000
Gerüstrohranschluss Frami-Flachanker 10-80cm
Galvanised Galvanised
Height: 7 cm Length: 97 cm
Doka Wall Systems | Framed formwork | Framed formwork Frami Xlife | 139
[kg] Article n° [kg] Article n°
Frami clip 0.26 588434000 Double scraper Xlife 100/150mm 1.40m 2.8 588674000
Frami-Stecker Doppelschaber Xlife 100/150mm 1,40m
Galvanised
Width: 3 cm
Height: 12 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Supporting construction 10.7 588477000
Abstützwinkel
Galvanised
Length: 66 cm
Width: 37 cm
Height: 91 cm
140 | Framed formwork Frami Xlife | Framed formwork | Doka Wall Systems
The Formwork Experts.
Near to you,
worldwide.
The Doka Formwork
Experts are there to
help you, at more
www.doka.com/locations
141
Dokaset
The wall formwork that needs up to 50 percent fewer ties
Dokaset is a fast, cost-saving wall formwork system for the building construction segment. All operations such as attaching the
lifting chain and placing the form-ties can be carried out very quickly and easily from ground level. Fully pre-mounted working
platforms, the Xlife formwork sheet and wide tie spacing are among the practical features that set this all-in-one system apart.
¡¡ up to 50 percent fewer wall-ties than conventional framed ¡¡ small number of form-ties, which are quick and easy to
formwork systems operate
¡¡ shorter forming-times, as the formwork can be tied working ¡¡ steel frames hot-dip galvanised both inside and out
from one side only ¡¡ long-life, easy-to-clean Xlife sheet
¡¡ ready for use in a few simple steps ¡¡ widely spaced form-ties, for short forming-times
High safety during forming and pouring Versatile range of possible uses
ensures fast working and safe worksite conditions for fast adaptation to any on-site situation
30 –
135
¡¡ rugged large-area panels for a low form-tie ratio
¡¡ integral platforms and ladders, providing a high level of
workplace safety
¡¡ sturdy steel frames, galvanised both inside and out, for flat,
plane concrete faces
277
¡¡ stacking elements from the Framax Xlife ‘construction kit’
permit formwork heights of up to 412 cm
270 135 30 40 60
Wide spacing between the form-ties means fewer form-tie The lifting chain can be reached from ground level – for great
points. This saves on equipment, labour and costs, making for workplace safety.
a high degree of cost-efficiency.
Housing development at
Spindelbaumweg in Linz, Austria
Contractors: Gebrüder Lang
Dokaset panel 2.70x2.70m 835.0 588900000 Dokaset counter railing 2.70m 21.0 588741000
Dokaset-Element 2,70x2,70m Dokaset counter railing 1.35m 15.0 588742000
Galvanised Dokaset-Gegengeländer
Height: 282 cm Height: 183 cm
Handrail post 1.00m 3.8 584335000 Framax wedge clamp 1.5 588152000
Geländer 1,00m Framax-Spannklemme
Galvanised Galvanised
Length: 124 cm Length: 21 cm
Dokaset tension tie 10-30cm 13.0 588910000 Panel strut 340 IB 24.3 580365000
Dokaset-Zuganker 10-30cm Elementstütze 340 IB
Galvanised consisting of:
Length: 115 cm (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Dokaset-Ankerlochreduktion 20,0
Galvanised
Length: 20 cm
Prop head EB 3.1 588244500
Stützenkopf EB
Galvanised
Length: 40.8 cm
Framax quick acting clamp RU 3.3 588153400 Width: 11.8 cm
Framax-Schnellspanner RU Height: 17.6 cm
Galvanised
Length: 20 cm Doka express anchor 16x125mm 0.31 588631000
Doka-Expressanker 16x125mm
Galvanised
Length: 18 cm
Follow fitting instructions!
Framax multi function clamp 5.8 588169000
Framax-Uni-Spanner
Galvanised
Length: 40 cm
Box-out clamp 24cm 3.3 580063000 Double scraper Xlife 100/150mm 1.40m 2.8 588674000
Box-out clamp 25cm 3.4 580064000 Doppelschaber Xlife 100/150mm 1,40m
Box-out clamp 30cm 3.8 580065000
Aussparungsklemme
Galvanised
Leg length: 10 cm
Simply more
opportunities.
Build your future on a
strong foundation and
launch your career at
www.doka.com/careers
151
Framed formwork Alu-Framax Xlife
The lightweight aluminium framed formwork for forming with or without a crane
With its low weight, Alu-Framax Xlife brings all the benefits of Framax Xlife framed formwork to craneless jobsites as well – also
seamlessly combined with Framax Xlife, of course.
¡¡ the low panel weight reduces the work-strain associated ¡¡ clean concrete finish from the high-grade Xlife sheet with its
with hand-set forming, yet the panels have a high load plastic-enhanced surface
capacity of 60 kN/m² ¡¡ the ingeniously co-ordinated panel formats permit a neat
¡¡ the frames are made of torsion-proof hollow aluminium joint pattern even when combining upright and horizontal
profiles, so can also be shifted by crane panels
¡¡ seamless transitioning to Framax Xlife makes operations ¡¡ no screw imprints in the concrete, as the formwork sheet is
easier to break down into crane-handled and man-handled screwed on from the rear
zones, permitting flexible logistics and fast workflow on the ¡¡ the neat negative frame-imprints in the concrete minimise
site any finishing-work
¡¡ high numbers of repeat uses made possible by its excellent ¡¡ safe vertical access with the Ladder system XS
manufacturing quality and extra-durable Xlife-sheet ¡¡ workplace safety on all sides with the Platform system
¡¡ high load capacity thanks to top-quality forged connector Xsafe plus
components ¡¡ practical accessories – such as panel struts, lifting/reposi-
¡¡ smaller number of (expensive) closure zones, due to the tioning devices, 3-in-1 pole tool etc. – make for safe, easy
consistent 15 cm increment grid handling of the formwork
¡¡ using the single-side-operable tying system Monotec opti-
mises workflows in confined spaces as well
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife | 153
System
Alu-Framax Xlife 30 45 60 75 90
270
¡¡ the high-grade powder-coating on the Alu-Framax Xlife
panels reliably prevents concrete adhesion
¡¡ integrated waling system: the connection profiles make it
90
easy to attach accessories – with no obligatory fixing points
Alu-Framax pallets
The practical Alu-Framax pallets make light work of offloading the panels at the site.
154 | Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
Framax circular forming plate
Combining Framax Xlife with Alu-Framax Xlife makes it The 75 cm wide Alu-Framax Xlife universal panel is used for
possible to divide up the site into crane-handled and man- forming columns, stop-ends and corners.
handled zones, making for flexible logistics and a fast workflow
on the site.
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife | 155
Article list
[kg] Article n° [kg] Article n°
Doka Wall
Framed formwork
Systems
Alu-Framax Xlife
Alu-Framax Xlife panel 0.90x2.70m 68.8 588301500 Framax hinged inside corner I galv. 2.70m 105.8 588136500
Alu-Framax Xlife panel 0.75x2.70m 55.7 588302500 Framax hinged inside corner I galv. 0.90m 41.0 588352500
Alu-Framax Xlife panel 0.60x2.70m 47.8 588304500 Framax-Scharnierecke I
Alu-Framax Xlife panel 0.45x2.70m 40.1 588306500 Galvanised, powder-coated
Alu-Framax Xlife panel 0.30x2.70m 30.0 588308500
Alu-Framax Xlife panel 0.90x0.90m 25.6 588310500
Alu-Framax Xlife panel 0.75x0.90m 21.6 588312500
Alu-Framax Xlife panel 0.60x0.90m 17.8 588314500
Alu-Framax Xlife panel 0.45x0.90m 15.4 588316500
Alu-Framax Xlife panel 0.30x0.90m 11.5 588318500
Alu-Framax Xlife-Element
Powder-coated
156 | Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Framax adjustable clamp 5.3 588168000 Panel strut 340 IB 24.3 580365000
Framax-Ausgleichsspanner Elementstütze 340 IB
Galvanised consisting of:
Length: 48 cm (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Framax stop-end waler tie 15-45cm 15.0 588940000 Galvanised
Framax stop-end waler tie 15-75cm 20.6 588941000 Delivery condition: folded closed
Framax-Stirnabschalzwinge
Galvanised
B
Framax universal fixing bolt 10-16cm 0.60 588158000
Framax-Universalverbinder 10-16cm
Galvanised
Length: 26 cm
Panel strut 540 IB 41.4 580366000
Elementstütze 540 IB
consisting of:
(A) Plumbing strut 540 IB 30.7 588697000
Framax universal fixing bolt 10-25cm 0.69 583002000 Galvanised
Framax wedge clamp 1.5 588152000 Doka express anchor 16x125mm 0.31 588631000
Framax-Spannklemme Doka-Expressanker 16x125mm
Galvanised Galvanised
Length: 21 cm Length: 18 cm
Follow fitting instructions!
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife | 157
[kg] Article n° [kg] Article n°
Doka coil 16mm 0.009 588633000 Framax pouring platform O 1.25/2.70m 117.0 588360000
Doka-Coil 16mm Framax-Betonierbühne O 1,25/2,70m
Galvanised Timber parts varnished yellow
Diameter: 1.6 cm Steel parts galvanised
Delivery condition: folded closed
158 | Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Framax transport gear 13.3 588232000 Framax steel closure plate 5cm 2.70m 14.0 588273000
Framax-Transportgehänge Framax steel closure plate 5cm 0.90m 6.0 588271000
Galvanised Framax-Stahlausgleich
Follow the directions in the "Operat- Powder-coated, blue
ing Instructions"!
Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife | 159
[kg] Article n° [kg] Article n°
Framax foundation clamp 0.90m 4.9 588141000 Tie rod system Monotec
Framax-Fundamentspanner 0,90m
Galvanised
Monotec tie 15.0 15-25cm Framax 3.9 588930000
Monotec tie 15.0 25-35cm Framax 4.2 588931000
Monotec-Anker 15,0 Framax
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
160 | Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems
The Formwork Experts.
www.doka.com/language
161
Wall formwork FF20
The site-ready timber-beam formwork with a system-grid and no frame imprints
With its practical element size-grid, rapid stackability and slippage-free inter-element connections, FF20 is the right choice for
many projects where stricter requirements are made regarding the concrete finish.
¡¡ fast forming, even when tough specifications are made ¡¡ quick and safe vertical stacking facilitated by integral
regarding the concrete finish, by combining the advantages centring stacking flange
of timber-beam formwork with the grid-related advantages ¡¡ crane-handling-safe, tight, slippage-free gangs achieved by
of a framed formwork system special FF20 formwork element connector
¡¡ adapts easily to any structure, thanks to its practical element
size-grid
¡¡ can be rented, so is also economical for small numbers of
repeat uses Comprehensive workplace safety
¡¡ project-specific adaptation possible, as it can be faced with with compatible ladderways and working platforms
any type of form-ply
Please note:
Doka Switzerland uses the System timber-beam formwork FL20 U100, with a proven hole-grid. System documentation and user
information can be obtained directly from www.doka.com/ch.
375
element, simplifies planning, forming operations and
logistics on the site
275
¡¡ accessories can be easily attached to the transverse walings
across the entire width of the element – with no obligatory
100
fixing points
¡¡ faced as standard with three-ply sheets; custom form-facing 50 75 100 200
375 cm
325 cm
(275 + 50)
275 cm
100 cm
The Fastening bolt FF20, with a star grip The Formwork element connector The pre-assembled elements are linked
nut, centres and connects the vertically FF20/50 Z makes light work of pulling together in a 25 cm grid, permitting
stacked elements in a slippage-free the ready-assembled FF20 elements optimum adaptation to the structure.
Corners
Right-angled corners are FF20 hinged corners provide Wall formwork FF20 is also FF20 can also be
also easy to form using the professional solutions for ideal for wall pillars. dimensioned for use in the
modular elements, even with acute and obtuse-angled horizontal – for casting floor-
different wall thicknesses of corners. slabs and walls in a single
up to 60 cm. pour, in fair-faced concrete
quality.
Formwork element FF20 2.00x2.75m 21mm 335.0 587512000 Inside corner FF20 2.75m 21mm 214.0 587516000
Formwork element FF20 1.00x2.75m 21mm 166.0 587508000 Inside corner FF20 1.00m 21mm 117.0 587525000
Formwork element FF20 0.75x2.75m 21mm 131.0 587504000 Innenecke FF20 21mm
Formwork element FF20 0.50x2.75m 21mm 92.0 587500000
Formwork element FF20 2.00x1.00m 21mm 190.0 587523000
Formwork element FF20 1.00x1.00m 21mm 95.0 587522000
Formwork element FF20 0.75x1.00m 21mm 79.5 587521000
Formwork element FF20 0.50x1.00m 21mm 58.0 587520000
Formwork element FF20 2.00x3.75m 21mm 440.0 587564000
Formwork element FF20 1.00x3.75m 21mm 224.0 587562000
Formwork element FF20 0.75x3.75m 21mm 172.0 587561000
Formwork element FF20 0.50x3.75m 21mm 120.0 587560000
Formwork element FF20 2.00x6.50m 21mm 692.0 587563000
Formwork element FF20 1.00x6.50m 21mm 346.0 587565000
Formwork element FF20 0.75x6.50m 21mm 272.0 587566000
Formwork element FF20 0.50x6.50m 21mm 189.5 587567000
Fertigelement FF20 21mm
Formwork element FF20 2.00x2.75m 27mm 348.0 587606000 Swivelling inside corner FF20 2.75m 21mm 246.5 587577000
Formwork element FF20 1.00x2.75m 27mm 173.0 587604000 Swivelling inside corner FF20 1.00m 21mm 103.0 587575000
Formwork element FF20 0.75x2.75m 27mm 136.0 587602000 Swivelling inside corner FF20 0.50m 21mm 53.7 587573000
Formwork element FF20 0.50x2.75m 27mm 96.0 587600000 Gelenkinnenecke FF20 21mm
Formwork element FF20 2.00x1.00m 27mm 195.0 587616000
Formwork element FF20 1.00x1.00m 27mm 103.0 587614000
Formwork element FF20 0.75x1.00m 27mm 81.5 587612000
Formwork element FF20 0.50x1.00m 27mm 59.5 587610000
Fertigelement FF20 27mm
Swivelling outside corner FF20 2.75m 27mm 102.7 587654000 Beam clamp Top50 1.2 580081000
Swivelling outside corner FF20 1.00m 27mm 46.2 587653000 Trägerklammer Top50
Gelenkaußenecke FF20 27mm Painted blue
Painted blue Height: 15 cm
Spring cotter 5mm 0.05 580204000 Panel strut 340 IB 24.3 580365000
Federvorstecker 5mm Elementstütze 340 IB
Galvanised consisting of:
Length: 13 cm (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Flange clamp H20 1.0 580135000 Galvanised
Flanschklammer H20 Length: 81.5 - 130.6 cm
Galvanised Galvanised
Width: 13 cm Delivery condition: folded closed
Width-across: 19 mm
Universal railing shackle 3.0 580478000 Side handrail clamping unit T 29.1 580488000
Universal-Geländerbügel Seitenschutzgeländer T
Galvanised Galvanised
Height: 20 cm Length: 115 - 175 cm
Height: 112 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Up to a pour-height of 3.60 m, only two 20.0 form-ties are Superb concrete surface, with no screw imprints in the
needed, thanks to concrete, as
¡¡ the 80 percent higher load capacity of the I tec 20 ¡¡ the form-facing is screwed on from the rear
composite formwork beam compared to conventional H20 ¡¡ the form-ties are located well inside the element, in a
timber formwork beams symmetrical pattern
¡¡ the stiff FF100 tec walings WU14, with their welded-on ¡¡ the pre-assembled beam grilles mean that any type of form-
plates facing can be used
¡¡ the integral corner reinforcement angle ensures dependable
sealing of the joint between the form-ply sheets at the
outside corners
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec | 175
Article list
[kg] Article n° [kg] Article n°
Dokaformwork
Wall Wall Systems
FF100 tec
FF100 tec element 2.50x6.00m 21mm 1105.0 586813000 FF100 tec outside corner 3.60m 21mm 440.0 586862000
FF100 tec element 1.25x6.00m 21mm 610.2 586814000 FF100 tec outside corner 3.00m 21mm 382.5 586823000
FF100 tec element 1.00x6.00m 21mm 464.0 586815000 FF100 tec outside corner 1.25m 21mm 220.0 586824000
FF100 tec element 0.75x6.00m 21mm 405.0 586816000 FF100 tec-Aussenecke
FF100 tec element 2.50x4.25m 21mm 828.0 586809000 Width: 110 cm
FF100 tec element 1.25x4.25m 21mm 466.0 586810000
FF100 tec element 1.00x4.25m 21mm 335.8 586811000
FF100 tec element 0.75x4.25m 21mm 296.0 586812000
FF100 tec element 2.50x3.60m 21mm 624.0 586853000
FF100 tec element 1.25x3.60m 21mm 353.0 586854000
FF100 tec element 1.00x3.60m 21mm 270.5 586855000
FF100 tec element 0.75x3.60m 21mm 230.0 586856000
FF100 tec element 2.50x3.00m 21mm 605.0 586801000
FF100 tec element 1.25x3.00m 21mm 345.0 586802000
FF100 tec element 1.00x3.00m 21mm 250.5 586803000
FF100 tec element 0.75x3.00m 21mm 218.5 586804000
FF100 tec element 2.50x1.25m 21mm 358.0 586805000
FF100 tec element 1.25x1.25m 21mm 192.8 586806000
FF100 tec element 1.00x1.25m 21mm 138.0 586807000
FF100 tec element 0.75x1.25m 21mm 117.7 586808000
FF100 tec-Element
176 | Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
FF100 tec inside corner grille 3.60m 216.0 586863000 Top100 tec adjustable waling extension 20.9 586924000
FF100 tec inside corner grille 3.00m 182.0 586845000 Top100 tec-Ausgleichslasche
FF100 tec inside corner grille 1.25m 121.5 586846000 Painted blue
FF100 tec-Inneneckrost Length: 137 cm
Width: 52 cm
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec | 177
[kg] Article n° [kg] Article n°
Top100 tec assembly angle 6.6 586929000 Box-out clamp type 1 ....cm 13.6 580066000
Top100 tec-Montagelasche Box-out clamp type 2 ....cm 15.0 580067000
Galvanised Aussparungsklemme .....cm
Length: 53.2 cm Painted blue
Width: 48.2 cm Leg length: 10 cm
Waling clamp H20 0.22 580114000 Panel strut 540 IB 41.4 580366000
Riegelklammer H20 Elementstütze 540 IB
Galvanised consisting of:
Width: 8 cm (A) Plumbing strut 540 IB 30.7 588697000
Galvanised
Width-across: 13 mm
Length: 310.5 - 549.2 cm
(B) Adjusting strut 220 IB 10.9 588251500
Filler neck GF SCC 39.0 580217000 Galvanised
GF-Füllstutzen SCC Length: 172.5 - 221.1 cm
Galvanised Galvanised
Length: 66 cm Delivery condition: folded closed
178 | Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Doka Wall Systems | Timber-beam formwork | Wall formwork FF100 tec | 179
[kg] Article n° [kg] Article n°
Scaffold tube connection 0.27 584375000 Doka personal fall-arrest set 3.6 583022000
Gerüstrohranschluss Doka-Sicherheitsgeschirr
Galvanised Follow the directions in the "Operat-
Height: 7 cm ing Instructions"!
180 | Wall formwork FF100 tec | Timber-beam formwork | Doka Wall Systems
The Formwork Experts.
Like Doka,
follow Doka.
Friends and followers
of Doka are always
up-to-date.
www.facebook.com/dokacom
181
Circular formwork H20
The practical circular formwork for exact curves
Circular formwork H20 is a practical circular formwork system that delivers smooth, curved walls from radii of 3.50 m upward –
steplessly.
Circular formwork H20 stands out for great flexibility, thanks Efficient construction workflow, as
to its ¡¡ there is only one connecting device (Adjustable clamp 10cm)
¡¡ practical height grid ¡¡ can easily be combined with Framax Xlife, Alu-Framax Xlife
¡¡ exact curves from a radius of 3.50 m upward and Column formwork RS
¡¡ flexible, heavy-duty Dokaplex 21 mm form-ply ¡¡ setting the radii is easy – simply by turning spindles
¡¡ radii are easy to check, using flexible templates
Highly cost-efficient
right from the very first time of use
The practical height grid and the systematic spacing of the Permissible fresh-concrete pressure: 60 kN/m²
form-ties make it possible to form widely differing height- Edge protection system XP
combinations quickly and easily. Ladder system XS
Working scaffold Modul
Easy to combine
300
240
70
Circular formwork element H20 2.40x0.70m 195.0 587820000 Template f. circular formw. H20 ...../.....mm 6.5 177020000
Circular formwork element H20 2.40x1.20m 244.0 587821000 Schablone für Rundschalung H20 ...../.....mm
Circular formwork element H20 2.40x2.40m 472.0 587822000 Weight per m²
Circular formwork element H20 2.40x3.00m 523.0 587813000 Project-specific!
Circular formwork element H20 2.40x3.60m 699.0 587823000
Rundschalungselement H20 2,40m
Panel strut 340 IB 24.3 580365000
Elementstütze 340 IB
consisting of:
(A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Galvanised
Delivery condition: folded closed
B
Circular formwork element H20 2.50x0.70m 197.0 587825000
Circular formwork element H20 2.50x1.20m 249.0 587826000
Circular formwork element H20 2.50x2.40m 480.0 587827000
Circular formwork element H20 2.50x3.00m 534.0 587814000
Circular formwork element H20 2.50x3.60m 716.0 587828000 Panel strut 540 IB 41.4 580366000
Rundschalungselement H20 2,50m Elementstütze 540 IB
consisting of:
(A) Plumbing strut 540 IB 30.7 588697000
Stacking plate for circular formwork H20 7.0 587830000 Galvanised
Aufstocklasche für Rundschalung H20 Length: 310.5 - 549.2 cm
Galvanised (B) Adjusting strut 220 IB 10.9 588251500
Height: 62 cm Galvanised
Length: 172.5 - 221.1 cm
Galvanised
Delivery condition: folded closed
Ausgleichsspanner 10cm
Galvanised
Length: 30 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Safety first.
With this symbol...
www.doka.com/safety
189
Large-area formwork Top 50
The large-area formwork for all shapes and loads
Large-area formwork Top 50 is a ‘construction kit’ large-area formwork system that is pre-assembled on a project-specific basis
and is designed to accomplish many very diverse types of task. The shape, size, tie-hole pattern and form-facing of the elements
can be adapted to suit any requirement.
Because it can be used with any form facing and adapts to any
shape of structure, Large-area formwork Top 50 is particularly
suitable for forming concrete that has to meet stringent specifi-
cations regarding its surface finish (i.e. fair-faced concrete).
Domino ESP Berne, Switzerland City-Tunnel, Leipzig, incl. underground stations, Germany
Multi-purpose waling WS10 Top50 0.50m 10.2 580001000 Shaft corner waling WS10 Top50 .....m 20.5 580069000
Multi-purpose waling WS10 Top50 0.75m 14.9 580002000 Eckwandriegel WS10 Top50 .....m
Multi-purpose waling WS10 Top50 1.00m 19.6 580003000 Painted blue
Multi-purpose waling WS10 Top50 1.25m 24.7 580004000 Project-specific!
Multi-purpose waling WS10 Top50 1.50m 29.7 580005000
Also available in profiles of thickness
Multi-purpose waling WS10 Top50 1.75m 35.0 580006000
U120 (Order designation: WU12).
Multi-purpose waling WS10 Top50 2.00m 38.9 580007000
Multi-purpose waling WS10 Top50 2.25m 44.2 580008000
Multi-purpose waling WS10 Top50 2.50m 48.7 580009000
Multi-purpose waling WS10 Top50 2.75m 54.2 580010000
Multi-purpose waling WS10 Top50 3.00m 60.2 580011000
Multi-purpose waling WS10 Top50 3.50m 68.4 580012000
Multi-purpose waling WS10 Top50 4.00m 79.4 580013000
Multi-purpose waling WS10 Top50 4.50m 89.1 580014000
Multi-purpose waling WS10 Top50 5.00m 102.0 580015000
Multi-purpose waling WS10 Top50 5.50m 112.4 580016000
Multi-purpose waling WS10 Top50 6.00m 118.0 580017000 Angular waling WS10 Top50 .....m 21.5 580068000
Mehrzweckriegel WS10 Top50 Winkelriegel WS10 Top50 .....m
Painted blue Painted blue
Project-specific!
Also available in profiles of thickness
U120 (Order designation: WU12).
Multi-purpose waling WU12 Top50 1.00m 25.3 580018000 Flange clamp H20 1.0 580135000
Multi-purpose waling WU12 Top50 1.25m 32.0 580019000 Flanschklammer H20
Multi-purpose waling WU12 Top50 1.50m 37.5 580020000 Galvanised
Multi-purpose waling WU12 Top50 1.75m 44.2 580021000 Width: 13 cm
Multi-purpose waling WU12 Top50 2.00m 50.0 580022000 Width-across: 19 mm
Multi-purpose waling WU12 Top50 2.50m 63.1 580023000
Multi-purpose waling WU12 Top50 3.00m 75.7 580024000
Multi-purpose waling WU12 Top50 3.50m 90.7 580025000
Multi-purpose waling WU12 Top50 4.00m 103.4 580026000
Mehrzweckriegel WU12 Top50
Painted blue
Flange clamp G 1.1 580120000
Flanschklammer G
Galvanised
Width: 13 cm
Width-across: 19 mm
Protective cap H20 0.36 587248000 Anchoring plate FF20/50 6.6 587531000
Stirnschuh H20 Ankerungslasche FF20/50
Galvanised Painted blue
Length: 20 cm Length: 55 cm
Width: 7 cm
Adjustable waling extension 1.40m Top50 15.0 580075000 Corner plate H20/H36 Top50 10.0 580078000
Ausgleichslasche 1,40m Top50 Ecklasche H20/H36 Top50
Painted blue Painted blue
Length: 49.7 cm
Width: 45.1 cm
Transition plate 18mm 16.0 588654000 Lifting bracket for column formwork 65.0 580607000
Transition plate 21mm 15.8 588656000 Kranöse für Stützenschalung
Übergangslasche Galvanised, powder-coated
Painted blue Length: 85 cm
Length: 54 cm Width: 85 cm
Width: 30 cm
Height: 51 cm
Inside corner plate 3.00m 53.0 580282000 Panel strut 340 IB 24.3 580365000
Inside corner plate 4.00m 69.0 580284000 Elementstütze 340 IB
Eckschiene consisting of:
Powder-coated, blue (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Galvanised
Delivery condition: folded closed
C
Universal bracket 90 30.4 580476000
Universal-Konsole 90
B Galvanised
Length: 121 cm
Height: 235 cm
Bracket planking 60/250m 48.7 583029000 Top50 adapter for Framax pouring platform U 18.5 588384000
Bracket planking 90/250m 61.0 583031000 Top50-Adapter für Framax-Betonierbühne U
Konsolenbelag Galvanised
Steel parts galvanised Width: 75 cm
Timber parts varnished yellow Height: 134 cm
(not illustrated)
Scaffold tube 48.3mm 0.50m 1.7 682026000 Handrail post T 1.80m 17.7 584373000
Scaffold tube 48.3mm 1.00m 3.6 682014000 Einschubgeländer T 1,80m
Universal strut T5/5 .....mm 6.5 584311000 Spindle strut T10 350/400cm 57.5 584328000
Strebe T5/5 .....mm Spindle strut T10 .....mm 16.9 584391000
Painted blue Spindelstrebe T10
Weight per linear metre
Suspension head WS10 8.1 580449000 Assembly angle Top50 6.7 580082000
Aufhängekopf WS10 Montagelasche Top50
Galvanised Galvanised
Length: 21 cm Length: 53.2 cm
Width: 18 cm Width: 48.6 cm
Height: 23 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Product Finder.
Visitors to doka.com
don’t so much
look for products as
find them.
www.doka.com/products
205
Facade formwork Top 50
Safe, economical forming of pre-cast facades
Facade formwork Top 50 speeds up work on pre-cast facades, both with integrated and set-back CIP columns.
¡¡ speeds up construction work, especially with CIP columns, ¡¡ lower labour costs from separating work on the facade
by integrating the column formwork from that on the floor-slab, and from easy forming of the
¡¡ cuts costs and saves time by using the pre-cast member as unobstructed slab
a stop-end ¡¡ integral fall-arrest barrier saves the costs that would other-
¡¡ brings cost and time-savings by allowing the slab-edge to wise be incurred for working and protection platforms
be cast in advance
¡¡ ready for fast on-site deployment following professional pre-
assembly by the Doka Ready-to-Use Service
Both with integrated and with set-back CIP columns, Facade formwork Top 50 is the cost-saving solution on construction projects
involving pre-cast facades.
Facade waling WS10 2.50m 50.0 580692000 Multi-purpose waling WU12 Top50 1.50m 37.5 580020000
Facade waling WU14 6.00m 189.2 580691000 Mehrzweckriegel WU12 Top50 1,50m
Fassadenriegel Painted blue
Painted blue
Facade waling connector 4.7 580695000 Corner connecting plate 90/50 13.8 580603000
Fassaden-Riegelverbinder Winkellasche 90/50
Galvanised Painted blue
Length: 26 cm Length: 51 cm
Height: 25 cm Width: 40 cm
Facade waling holder 2.3 580674000 Panel strut 340 IB 24.3 580365000
Fassaden-Riegelhalter Elementstütze 340 IB
Galvanised consisting of:
Length: 31 cm (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Facade strut holder 2.0 580675000 Galvanised
Fassaden-Stützenhalter
Galvanised Delivery condition: folded closed
Length: 30 cm
Normal coupler 48mm 1.2 682004000 Doka personal fall-arrest set 3.6 583022000
Normalkupplung 48mm Doka-Sicherheitsgeschirr
Galvanised Follow the directions in the "Operat-
Width-across: 22 mm ing Instructions"!
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Tool box GF 6.5 580390000
GF-Werkzeugbox
included in scope of supply:
(A) Reversible ratchet 1/2" 0.73 580580000
Galvanised
Length: 30 cm
(B) Fork wrench 13/17 0.08 580577000
Fast pouring
Beam I tec 20
Platform system Xsafe plus
Edge protection system XP
Ladder system XS
Working scaffold Modul
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec | 215
Article list
[kg] Article n° [kg] Article n°
Doka Wall Systems
Large-area formwork Top 100 tec
Top100 tec waling WU14 0.50m 15.2 586901000 Flange clamp G 1.1 580120000
Top100 tec waling WU14 0.75m 21.4 586902000 Flanschklammer G
Top100 tec waling WU14 1.00m 28.6 586903000 Galvanised
Top100 tec waling WU14 1.25m 35.8 586904000 Width: 13 cm
Top100 tec waling WU14 1.50m 43.3 586905000
Width-across: 19 mm
Top100 tec waling WU14 1.75m 51.2 586906000
Top100 tec waling WU14 2.00m 57.8 586907000
Top100 tec waling WU14 2.25m 67.8 586908000
Top100 tec waling WU14 2.50m 72.2 586909000
Top100 tec waling WU14 2.75m 79.0 586910000
Top100 tec waling WU14 3.00m 85.8 586911000
Top100 tec waling WU14 3.50m 100.7 586912000
Top100 tec waling WU14 4.00m 114.2 586913000 Beam screw S 8/60 0.06 580116000
Top100 tec waling WU14 4.50m 119.0 586914000 Riegelverschraubung S 8/60
Top100 tec waling WU14 5.00m 144.5 586915000 Galvanised
Top100 tec waling WU14 5.50m 166.5 586916000 Length: 7 cm
Top100 tec waling WU14 6.00m 182.2 586917000 Width-across: 13 mm
Top100 tec-Riegel WU14
Painted blue
Beam screw H 8/70 0.06 580117000
Riegelverschraubung H 8/70
Galvanised
Length: 8 cm
Width-across: 13 mm
216 | Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
FF100 tec inside corner grille 3.60m 216.0 586863000 Top100 tec adjustable waling extension 20.9 586924000
FF100 tec inside corner grille 3.00m 182.0 586845000 Top100 tec-Ausgleichslasche
FF100 tec inside corner grille 1.25m 121.5 586846000 Painted blue
FF100 tec-Inneneckrost Length: 137 cm
Width: 52 cm
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec | 217
[kg] Article n° [kg] Article n°
218 | Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Doka express anchor 16x125mm 0.31 588631000 Universal railing shackle 3.0 580478000
Doka-Expressanker 16x125mm Universal-Geländerbügel
Galvanised Galvanised
Length: 18 cm Height: 20 cm
Follow fitting instructions!
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec | 219
[kg] Article n° [kg] Article n°
Handrail post T 1.80m 17.7 584373000 Spindle strut GS T6 95/140cm 10.3 584340000
Einschubgeländer T 1,80m Spindelstrebe GS T6 95/140cm
Galvanised Galvanised
220 | Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Height adjuster for formwork beams 11.9 580218000 Filler neck GF SCC 39.0 580217000
Höhenjustierung für Schalungsträger GF-Füllstutzen SCC
Galvanised Galvanised
Height: 46 cm Length: 66 cm
Doka Wall Systems | Timber-beam formwork | Large-area formwork Top 100 tec | 221
[kg] Article n° [kg] Article n°
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
222 | Large-area formwork Top 100 tec | Timber-beam formwork | Doka Wall Systems
The Formwork Experts.
Broadcasting
ourselves.
You’ll find all the
videos about our
products and services
www.youtube.com/doka
223
Column formwork KS Xlife
The high-speed column formwork with a folding mechanism
For situations where large numbers of square and rectangular columns, with variable cross-sections, need to be formed cost-
effectively and on schedule.
¡¡ formwork is simply folded open and shut, minimising ¡¡ high numbers of re-use cycles and fewer changes of form-
erection and striking times facing, thanks to the extremely hard-wearing plastic coating
¡¡ wide adjusting range allows many different column cross- ¡¡ the improved surface makes it easy to clean, also with a
sections between 20 and 60 cm to be formed in a 5 cm high-pressure washer, and means that fewer areas need
grid, without having to change system repair
¡¡ achieves immaculate fair-faced concrete quality because the ¡¡ special sheet structure means sheet can also be nailed at
form-facing is screwed-on from the rear, and there are no low temperatures without splintering
form-tie points or frame imprints
¡¡ column formwork units can be repositioned in a single crane ¡¡ safe vertical access with the Ladder system XS
cycle without being dismantled, which saves crane time ¡¡ workplace safety on all sides with column-formwork
¡¡ up to a formwork height of 3.60 m, the units can be platforms
repositioned in the horizontal with no need for a crane, on ¡¡ practical accessories – such as panel struts, lifting/reposi-
shifting-wheels tioning devices etc. – make for safe, easy handling of the
formwork
Clean edges
Xlife panel KS 3.30m 185.0 580346500 Protective plate KS top 3.0 580357000
Xlife-Element KS 3,30m Schutzleiste KS oben
Galvanised Galvanised
Width: 80 cm Length: 65.3 cm
Delivery condition: folded closed Width: 8.4 cm
Xlife panel KS 1.20m 66.0 580338500 Frontal triangular ledge KS 20 4.00m 0.93 580347000
Xlife-Element KS 1,20m
Frontal triangular ledge KS 15 4.00m 0.71 580359000
Galvanised Stirndreikantleiste KS
Width: 80 cm Grey
Delivery condition: folded closed
Panel strut 340 IB 24.3 580365000 Doka coil 16mm 0.009 588633000
Elementstütze 340 IB Doka-Coil 16mm
consisting of: Galvanised
(A) Plumbing strut 340 IB 16.7 588696000 Diameter: 1.6 cm
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Platform adapter KS 11.4 580341000
Length: 81.5 - 130.6 cm Bühnenanschluss KS
Galvanised Galvanised
Delivery condition: folded closed Length: 74 cm
Width: 12 cm
Height: 20 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Top projects –
worldwide.
Use Google Maps to
navigate your way
around the globe to
www.doka.com/topprojects
231
Column formwork RS
The steel formwork for round column cross-sections
Exactly round columns, in superlative fair-faced concrete quality, can be achieved using Column formwork RS.
¡¡ fast, play-free connections achieved by integrated quick- ¡¡ safe vertical access with the Ladder system XS
acting couplings ¡¡ workplace safety on all sides with column-formwork
¡¡ integral crane-hoisting point for safe handling platforms
¡¡ shells can be repositioned either one at a time or in stacks, ¡¡ practical accessories – such as panel struts, lifting/reposi-
with a stacking aid that prevents any slippage of the shells tioning devices etc. – make for safe, easy handling of the
formwork
Standard diameters 30 cm to 60 cm (custom sizes on enquiry!) Permissible fresh-concrete pressure: 150 kN/m²
Ladder system XS
Working scaffold Modul
Column element RS D30 3.00m 149.0 587909000 Panel strut 540 IB 41.4 580366000
Column element RS D30 1.00m 65.0 587908000 Elementstütze 540 IB
Column element RS D30 0.50m 36.0 587907000 consisting of:
Column element RS D30 0.25m 22.5 587944000 (A) Plumbing strut 540 IB 30.7 588697000
Column element RS D35 3.00m 166.0 587912000 Galvanised
Column element RS D35 1.00m 76.0 587911000 Length: 310.5 - 549.2 cm
Column element RS D35 0.50m 42.0 587910000
Column element RS D35 0.25m 26.0 587945000 (B) Adjusting strut 220 IB 10.9 588251500
Column element RS D40 3.00m 175.0 587915000 Galvanised
Column element RS D40 1.00m 80.7 587914000 Length: 172.5 - 221.1 cm
Column element RS D40 0.50m 44.9 587913000 Galvanised
Column element RS D40 0.25m 27.7 587946000 Delivery condition: folded closed
Column element RS D45 3.00m 188.0 587918000
Column element RS D45 1.00m 85.0 587917000
Column element RS D45 0.50m 48.0 587916000
Column element RS D45 0.25m 29.0 587947000
Column element RS D50 3.00m 195.0 587921000 A
Column element RS D50 1.00m 88.0 587920000
Column element RS D50 0.50m 49.0 587919000
Column element RS D50 0.25m 31.5 587948000
Column element RS D60 3.00m 217.0 587927000
Column element RS D60 1.00m 96.5 587926000
Column element RS D60 0.50m 53.0 587925000
Column element RS D60 0.25m 34.2 587950000
Stützenelement RS B
Painted blue
Ø 24, 25, 55, 65, 70, 75, 80, 90, 100,
110, 120, 130, 140, 150 and 180 cm
on inquiry!
Service Finder.
Visitors to doka.com
don’t so much
look for services as
find them.
www.doka.com/services
239
Column formwork Framax Xlife
The formwork for rectangular and square CIP columns
Universal panels from the Framax Xlife framed-formwork range are ideal for forming varied cross-sections of column in a 5 cm grid
– without needing a dedicated column formwork system on the site.
¡¡ enables column cross-sections of up to 105 cm x 105 cm, ¡¡ safe vertical access with the Ladder system XS
by adapting in a 5 cm grid ¡¡ workplace safety on all sides with column-formwork
¡¡ practical accessories make the formwork quick to assemble platforms
and reset ¡¡ practical accessories – such as panel struts, lifting/reposi-
tioning devices etc. – make for safe, easy handling of the
formwork
90 120
Framax Xlife universal panels are available in widths of 90 cm Permissible fresh-concrete pressure: 90 kN/m²
and 120 cm and in panel heights of 90 cm, 135 cm, 270 cm Xlife sheet
and 330 cm. Edge protection system XP
Ladder system XS
Working scaffold Modul
Doka Wall Systems | Column formwork | Column formwork Framax Xlife | 241
References
The Alu-Framax Xlife system
also has a universal panel:
with a width of 75 cm, this
is ideal for columns, stop-
ends and corners. In this
way, columns can be formed
without needing any crane
assistance at all.
242 | Column formwork Framax Xlife | Column formwork | Doka Wall Systems
Reclosable holes in the
form-facing, in a 5 cm grid,
make the universal panels
very versatile. Universal
fixing bolts are used to
quickly and easily assemble
the panels into column
cross-sections of up to
105 cm x 105 cm.
Doka Wall Systems | Column formwork | Column formwork Framax Xlife | 243
Article list
[kg] Article n° [kg] Article n°
Doka Wall
Column formwork
Systems
Framax Xlife
Framax Xlife universal panel 0.90x2.70m 148.0 588122500 Panel strut 340 IB 24.3 580365000
Framax Xlife universal panel 0.90x1.35m 79.3 588124500 Elementstütze 340 IB
Framax Xlife universal panel 0.90x0.90m 63.0 588120500 consisting of:
Framax Xlife universal panel 0.90x3.30m 182.6 588228500 (A) Plumbing strut 340 IB 16.7 588696000
Framax Xlife-Uni-Element Galvanised
Galvanised, powder-coated Length: 190.8 - 341.8 cm
Corners marked in blue (B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Galvanised
Delivery condition: folded closed
244 | Column formwork Framax Xlife | Column formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Doka Wall Systems | Column formwork | Column formwork Framax Xlife | 245
[kg] Article n° [kg] Article n°
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
246 | Column formwork Framax Xlife | Column formwork | Doka Wall Systems
The Formwork Experts.
Good news.
In the Newsroom,
Doka keeps you in-
formed about what’s
new in the world of
www.doka.com/news
247
Column formwork Frami Xlife
The lightweight formwork for rectangular and square CIP columns
Frami Xlife universal panels are ideal for forming column cross-sections by hand or by crane.
¡¡ enables column cross-sections of up to 80 cm x 80 cm, by ¡¡ safe vertical access with the Ladder system XS
adapting in a 5 cm grid ¡¡ workplace safety on all sides with bracket-based platform
¡¡ practical accessories make the formwork quick to assemble construction
and reset ¡¡ practical accessories – such as panel struts, lifting/reposi-
tioning devices etc. – make for safe, easy handling of the
formwork
75
300
270
150
120
Frami universal panels are available in widths of 75 cm and Permissible fresh-concrete pressure: 80 kN/m²
90 cm and in panel heights of 120 cm, 150 cm, 270 cm and Xlife sheet
300 cm, for column cross-sections of up to 80 cm x 80 cm, in Edge protection system XP
a 5 cm grid. Ladder system XS
Working scaffold Modul
Doka Wall Systems | Column formwork | Column formwork Frami Xlife | 249
Article list
[kg] Article n° [kg] Article n°
Doka Wall
Framed formwork
Systems
Frami Xlife
Frami Xlife panel 0.90x1.20m 39.0 588401500 Frami anchoring panel 0.60x1.20m 32.1 588403000
Frami Xlife panel 0.75x1.20m 33.5 588447500 Frami anchoring panel 0.60x1.50m 37.8 588408000
Frami Xlife panel 0.60x1.20m 29.5 588463500 Frami-Ankerelement
Frami Xlife panel 0.45x1.20m 24.0 588404500 Galvanised
Frami Xlife panel 0.30x1.20m 19.5 588405500 Corners marked in green
Frami Xlife panel 0.90x1.50m 46.5 588406500
Frami Xlife panel 0.75x1.50m 41.3 588448500
Frami Xlife panel 0.60x1.50m 35.5 588464500
Frami Xlife panel 0.45x1.50m 28.9 588409500
Frami Xlife panel 0.30x1.50m 24.8 588410500
Frami Xlife panel 0.90x2.70m 79.2 588481500
Frami Xlife panel 0.75x2.70m 69.5 588449500
Frami Xlife panel 0.60x2.70m 60.5 588465500 Frami inside corner 1.20m 20cm 25.3 588471000
Frami Xlife panel 0.45x2.70m 49.5 588482500 Frami inside corner 1.50m 20cm 30.7 588472000
Frami Xlife panel 0.30x2.70m 40.3 588483500 Frami inside corner 2.70m 20cm 51.6 588485000
Frami Xlife panel 0.90x3.00m 86.5 588411500 Frami inside corner 3.00m 20cm 57.4 588417000
Frami Xlife panel 0.75x3.00m 76.5 588412500 Frami-Innenecke
Frami Xlife panel 0.60x3.00m 65.0 588413500 Galvanised
Frami Xlife panel 0.45x3.00m 54.3 588414500
Frami Xlife panel 0.30x3.00m 45.0 588415500
Frami Xlife-Element
Galvanised
Custom sizes on enquiry!
250 | Column formwork Frami Xlife | Column formwork | Doka Wall Systems
[kg] Article n° [kg] Article n°
Scaffold tube 48.3mm 0.50m 1.7 682026000 Frami frame hole plug 0.002 588444000
Scaffold tube 48.3mm 1.00m 3.6 682014000 Frami-Ankerstopfen
Scaffold tube 48.3mm 1.50m 5.4 682015000 Blue
Scaffold tube 48.3mm 2.00m 7.2 682016000 Diameter: 2.5 cm
Scaffold tube 48.3mm 2.50m 9.0 682017000
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000 Frami plug 0.003 588445000
Scaffold tube 48.3mm 4.50m 16.2 682022000 Frami-Abdeckstopfen
Scaffold tube 48.3mm 5.00m 18.0 682023000 Yellow
Scaffold tube 48.3mm 5.50m 19.8 682024000 Diameter: 2 cm
Scaffold tube 48.3mm 6.00m 21.6 682025000
Scaffold tube 48.3mm .....m 3.6 682001000
Gerüstrohr 48,3mm
Galvanised
Doka Safety Systems
You will find working and protec-
tion platforms, guardrail systems
Scaffold tube connection 0.27 584375000
Gerüstrohranschluss and access systems in the section
headed "Doka Safety Systems".
Galvanised
Height: 7 cm
Doka Wall Systems | Column formwork | Column formwork Frami Xlife | 251
Column formwork Top 50
The formwork for cast-in-place columns of any shape and size
Complicated column cross-sections, large column heights, many formwork re-use cycles, tough specifications regarding the
concrete finish – a made-to-measure Column formwork Top 50 can handle them all economically.
¡¡ can be adapted to different requirements and fresh-concrete ¡¡ safe vertical access with the Ladder system XS
pressures, as the system is freely configurable to any project ¡¡ workplace safety on all sides with column-formwork
¡¡ superlative concrete finishes, as any form-facing is possible platforms
¡¡ non-tied column cross-sections of up to 120 cm x 120 cm ¡¡ practical accessories – such as panel struts, lifting/reposi-
are possible by using the Corner connecting plate 90/50 tioning devices etc. – make for safe, easy handling of the
¡¡ round and polygonal columns of up to 4.00 m in diameter formwork
are possible by using the Column connecting plate 6/8
Column formwork Top 50 can be face with any desired form- Edge protection system XP
facing. The Ready-to-Use Service will deliver even the most Ladder system XS
unusual shapes to the site, on time and ready for immediate Working scaffold Modul
use.
Multi-purpose waling WS10 Top50 1.00m 19.6 580003000 Column connecting plate 6/8 15.0 580072000
Multi-purpose waling WS10 Top50 1.25m 24.7 580004000 Stützenlasche 6/8
Mehrzweckriegel WS10 Top50 Painted blue
Painted blue Length: 58 cm
Doka express anchor 16x125mm 0.31 588631000 Scaffold tube 48.3mm 0.50m 1.7 682026000
Doka-Expressanker 16x125mm Scaffold tube 48.3mm 1.00m 3.6 682014000
Galvanised Scaffold tube 48.3mm 1.50m 5.4 682015000
Length: 18 cm Scaffold tube 48.3mm 2.00m 7.2 682016000
Scaffold tube 48.3mm 2.50m 9.0 682017000
Follow fitting instructions!
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000
Scaffold tube 48.3mm 5.00m 18.0 682023000
Scaffold tube 48.3mm 5.50m 19.8 682024000
Scaffold tube 48.3mm 6.00m 21.6 682025000
Doka coil 16mm 0.009 588633000 Scaffold tube 48.3mm .....m 3.6 682001000
Doka-Coil 16mm Gerüstrohr 48,3mm
Galvanised Galvanised
Diameter: 1.6 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
¡¡ equipment-utilisation is maximised by the combinable ¡¡ safe vertical access with the Ladder system XS
‘Attachable frames’ ¡¡ workplace safety on all sides with bracket-based platform
¡¡ height can be continuously adjusted by combining the construction
‘Variabel’ and ‘Universal F’ supporting construction frames
¡¡ easy to combine with Doka wall formwork systems
up to 4.50 m
up to 4.00 m
9739-347-02 9739-224-02
up to 12.80 m
C
up to 10.40 m
D
B A
up to 8.10 m
up to 6.00 m
9799-208-02
9739-361-01
9739-222-02
Custom applications
Support. construction frame "Variable" 3.30m 187.8 580516000 Tension plate 2.5 580534000
Abstützbock Variabel 3,30m Zuglasche
consisting of: Painted blue
(A) Waling WU14 for supporting construction frame 99.0 580510000 Length: 19 cm
Painted blue
Height: 252 cm
(B) Multi-purpose waling WS10 Top50 2.00m 38.9 580007000
Painted blue Multi-purpose waling WS10 Top50 1.00m 19.6 580003000
(C) Tension plate 2.5 580534000 Multi-purpose waling WS10 Top50 1.75m 35.0 580006000
Painted blue
Multi-purpose waling WS10 Top50 2.00m 38.9 580007000
Multi-purpose waling WS10 Top50 2.50m 48.7 580009000
Length: 19 cm Multi-purpose waling WS10 Top50 2.75m 54.2 580010000
(D) Supporting shoe 9.5 580532000 Multi-purpose waling WS10 Top50 3.00m 60.2 580011000
Painted blue Multi-purpose waling WS10 Top50 3.50m 68.4 580012000
Length: 28 cm Multi-purpose waling WS10 Top50 4.00m 79.4 580013000
(E) Connecting pin 10cm 0.34 580201000 Mehrzweckriegel WS10 Top50
Galvanised Painted blue
Length: 14 cm
(F) Spring cotter 5mm 0.05 580204000
Galvanised
Length: 13 cm
(G) Spindle strut 12 3.00m 32.0 580521000
Painted blue
Length: 201 - 234 cm
(H) Screw-on coupler 48mm 50 0.84 682002000 Spindle strut 12 3.00m 32.0 580521000
Spindelstrebe 12 3,00m
Galvanised
Painted blue
Width-across: 22 mm
Painted blue Length: 201 - 234 cm
G
H
C
D
Spindle strut T7 305/355cm 35.0 584327000
B
Spindelstrebe T7 305/355cm
Galvanised
E F
Connecting pin 10cm 0.34 580201000 Rear spindle for supp. construction frame 18.3 580515000
Verbindungsbolzen 10cm Abstützbockspindel hinten
Galvanised Galvanised
Length: 14 cm
Clamp for supp. constr. distancer 20cm 5.0 582920000 Attachable roller 200 19.3 580538000
Klemme für Bockdistanz 20cm Ansteckrolle 200
Galvanised Painted blue
Length: 36 cm Height: 38 cm
Width: 7 cm
Travelling profile F 2.00m rear 187.5 582930000 Screw-on coupler 48mm 50 0.84 682002000
Verfahrprofil F 2,00m hinten Screw-on coupler 48mm 95 0.88 586013000
Galvanised Anschraubkupplung
Length: 574 cm Galvanised
Width-across: 22 mm
Universal tool box 15.0 9.1 580392000 Spindle strut T6 100/150cm 12.5 584323000
Universal-Werkzeugbox 15,0 Spindelstrebe T6 100/150cm
included in scope of supply: Galvanised
(A) Reversible ratchet 1/2" 0.73 580580000
Galvanised
Length: 30 cm
(B) Fork wrench 13/17 0.08 580577000
(C) Fork wrench 22/24 0.22 580587000
(D) Fork wrench 30/32 0.80 580897000
(E) Fork wrench 36/41 1.0 580586000
(F) Ring spanner 17/19 0.27 580590000
(G) Square nut 22 0.31 580589000
(H) Box spanner 41 0.99 580585000
(I) Extension 11cm 1/2" 0.20 580581000
(J) Extension 22cm 1/2" 0.31 580582000
(K) Universal joint coupling 0.16 580583000
(L) Box nut 19 1/2" L 0.16 580598000 Spindle strut T7 100/150cm 16.8 584309000
(M) Box nut 13 1/2" 0.06 580576000 Spindelstrebe T7 100/150cm
(N) Box nut 24 1/2" 0.12 580584000 Galvanised
(O) Box nut 30 1/2" 0.20 580575000
(P) Positioning cone spanner 15.0 DK 0.30 580579000
Galvanised
Length: 8 cm
Width-across: 30 mm
Spindle strut T7 250/300cm 29.4 584326000 Spindle strut SL-1 T16 140/225cm 87.8 582872000
Spindelstrebe T7 250/300cm Spindelstrebe SL-1 T16 140/225cm
Galvanised Galvanised
Spindle strut SL-1 T16 100/140cm 54.1 582871000 Spindle for attachable frame F 2.40m 20.1 582903000
Spindelstrebe SL-1 T16 100/140cm Spindel für Anbaurahmen F 2,40m
Galvanised Galvanised
Height: 47.5 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Tableforms 274
Dokamatic table 274
Dokaflex table 288
Shifting devices for tables 296
Panel floor formwork 310
Panel floor formwork Dokadek 30 310
Timber-beam floor formwork 322
Dokaflex 30 tec 322
Doka Xtra 332
Dokaflex 1-2-4 342
¡¡ shortens build-times and cuts assembly costs because ¡¡ integrable table platforms mean there is no need for work
complete units can be repositioned and protection platforms
¡¡ horizontal repositioning can be handled by just one person, ¡¡ pre-planned system solutions make quick work of forming
with the highly manoeuvrable ‘DoKart plus’ shifting device drop beams and stop-ends
¡¡ vertical repositioning using the climbing Table Lifting System ¡¡ swivel-mounted floor props make it easy to move the tables
TLS, independently of the wind conditions, frees up the out over parapets
crane for other uses ¡¡ high load capacity, achieved by rigid restraint of the floor
props
Fast construction workflows without the crane: with the Table Floor prop Eurex top
Lifting System TLS, tableforms are brought up to the next floor Shifting devices for tables
at the push of a button. Edge protection system XP
Ladder system XS
2500
lying ‘grid’ logic: 4.00 m x 2.00 m, 4.00 m x 2.50 m,
2000
5.00 m x 2.00 m, 5.00 m x 2.50 m
¡¡ pre-assembled table grille for facing with any desired form-
ply
Dokamatic swivel-head 40
With their field-proven ‘top’ quality, the Doka formwork sheets, ‘H20 top’ beams and ‘Eurex top’ props ensure reliability and a long
service life. The flexurally rigid link with the tableform superstructure increases the load capacity of the ‘Eurex top’ floor props by
10 kN – from 20 kN to 30 kN in the case of a ‘Eurex 20 top’ prop, and from 30 kN to 40 kN in the case of a ‘Eurex 30 top’ prop.
Some simple steps and just a few blows of the hammer are
all it takes to fix, change or remove the props.The integrated
quick-acting prop connector makes it possible to adapt the
tableforms very quickly to all different jobsite tasks.
The tilting mechanism of the Dokamatic swivel-head 40 is very To enable the tables to be lifted out across parapets and
easy to operate. railings unobstructed, the props can be locked at an angle of
either 75° (as shown in picture) or 90°.
The Dokamatic table platforms are located directly on the work-deck level, so they provide high safety. This does away with the
need for extra working and protection platforms on the building – and for the erection work that this would require.
¡¡ simple, fast forming of downstand beams with the Thanks to their compact design, the Dokamatic tables can be
Dokamatic floor beam plate, for shifting the downstand- loaded onto a truck on top of one another in a very space-
beam formwork and the Dokamatic table in one piece saving way, making for improved logistics and reduced
¡¡ the floor beam plate lets you form downstand beams of up shipping costs.
to 60 cm in height (in a 5 cm grid)
Dokamatic table 2.50x4.00m 21mm 515.0 586200000 Doka floor prop Eurex 30 top 250 12.8 586092400
Dokamatic table 2.50x5.00m 21mm 656.0 586201000 Length: 148 - 250 cm
Dokamatic table 2.00x4.00m 21mm 480.0 586202000 Doka floor prop Eurex 30 top 300 16.4 586093400
Dokamatic table 2.00x5.00m 21mm 600.0 586203000 Length: 173 - 300 cm
Dokamatic-Tisch Doka floor prop Eurex 30 top 350 20.7 586094400
Length: 198 - 350 cm
Doka floor prop Eurex 30 top 400 24.6 586095400
Length: 223 - 400 cm
Doka floor prop Eurex 30 top 450 29.1 586119400
Length: 248 - 450 cm
Doka floor prop Eurex 30 top 550 38.6 586129000
Length: 303 - 550 cm
Doka-Deckenstütze Eurex 30 top
Galvanised
Dokamatic table 2.50x4.00m 27mm 560.0 586204000
Dokamatic table 2.50x5.00m 27mm 685.0 586205000
Dokamatic table 2.00x4.00m 27mm 522.0 586206000
Dokamatic table 2.00x5.00m 27mm 625.0 586207000
Dokamatic-Tisch
Dokamatic table grille 2.50x4.00m 418.0 586208000 Dokamatic swivel head 40 17.1 586214000
Dokamatic table grille 2.50x5.00m 536.0 586209000 Dokamatic-Schwenkkopf 40
Dokamatic table grille 2.00x4.00m 402.0 586210000 Galvanised
Dokamatic table grille 2.00x5.00m 508.0 586211000
Dokamatic-Tischrost Length: 60 cm
Dokamatic platform bracket 1.00m 19.5 586227000 End-shutter tie rod 15.0 15-40cm 0.91 586258000
Dokamatic-Bühnenkonsole 1,00m Abschalanker 15,0 15-40cm
Galvanised Galvanised
Length: 112 cm Length: 55 cm
Height: 124 cm
Dokamatic platform extension 0.50/2.00m 31.0 586220000 Plug for closure plate R25 0.003 588187000
Dokamatic platform extension 0.50/2.50m 34.3 586219000 Ausgleichsblechstopfen R25
Dokamatic-Bühnenverbreiterung Black
Steel parts galvanised Diameter: 3 cm
Timber parts varnished yellow
Dokamatic insertion beam 1.95m 8.0 183054000 Beam clamp Top50 1.2 580081000
Dokamatic insertion beam 2.45m 10.0 183045000 Trägerklammer Top50
Dokamatic-Einschubträger Painted blue
Varnished yellow Height: 15 cm
Lashing strap 5.00m 2.8 586018000 Handrail post T 1.80m 17.7 584373000
Zurrgurt 5,00m Einschubgeländer T 1,80m
Yellow Galvanised
F
E H
G
A
I
J
M
L
App-solutely
innovative.
Experience
pathbreaking
solutions on your
smartphone or tablet,
Doka Floor Systems
with the Doka apps.
www.doka.com/apps
287
Dokaflex table
The tried-and-tested high-speed tableform
Dokaflex tables are easy and practical to set up and can be shifted and adapted very quickly. This makes them a cost-effective and
efficient way of carrying out large-area slab projects. Dokaflex tables can of course be combined with Dokamatic tables.
¡¡ rapid pace of work, as ready-assembled units can be ¡¡ longer service life due to the high-grade system components
travelled ¡¡ site logistics are simplified by the small number of
¡¡ horizontal repositioning can be handled by just one person, different system components, all designed for optimum
with the highly manoeuvrable ‘DoKart plus’ shifting device interoperability
¡¡ vertical repositioning using the Table Lifting System TLS ¡¡ first-rate concrete surfaces, as any type of form-facing can
frees up the crane for other uses be selected
Perfect adaptability
to any requirement
Fast construction workflows without the crane: with the Table Floor prop Eurex top
Lifting System TLS, tableforms are brought up to the next floor Shifting devices for tables
at the push of a button. Edge protection system XP
Ladder system XS
Dokaflex table 2.50x4.00m 21mm 385.0 586052000 Doka floor prop Eurex 30 top 250 12.8 586092400
Dokaflex table 2.50x5.00m 21mm 470.0 586053000 Length: 148 - 250 cm
Dokaflex table 2.00x4.00m 21mm 317.0 586050000 Doka floor prop Eurex 30 top 300 16.4 586093400
Dokaflex table 2.00x5.00m 21mm 386.0 586051000 Length: 173 - 300 cm
Dokaflex-Tisch Doka floor prop Eurex 30 top 350 20.7 586094400
Length: 198 - 350 cm
Doka floor prop Eurex 30 top 400 24.6 586095400
Length: 223 - 400 cm
Doka floor prop Eurex 30 top 450 29.1 586119400
Length: 248 - 450 cm
Doka floor prop Eurex 30 top 550 38.6 586129000
Length: 303 - 550 cm
Doka-Deckenstütze Eurex 30 top
Galvanised
Dokaflex table 2.50x4.00m 27mm 405.0 586054000
Dokaflex table 2.50x5.00m 27mm 485.0 586055000
Dokaflex table 2.00x4.00m 27mm 337.0 586056000
Dokaflex table 2.00x5.00m 27mm 411.0 586057000
Dokaflex-Tisch
Doka formwork sheet 3-S plus 21mm 9.7/200cm 2.0 186109000 Dokamatic insertion beam 1.95m 8.0 183054000
Doka formwork sheet 3-S plus 21mm 9.7/250cm 2.5 186110000 Dokamatic insertion beam 2.45m 10.0 183045000
Doka formwork sheet 3-S plus 21mm 20/200cm 4.2 186107000 Dokamatic-Einschubträger
Doka formwork sheet 3-S plus 21mm 20/250cm 5.3 186108000 Varnished yellow
Doka-Schalungsplatte 3-S plus 21mm
Supporting head H20 DF 0.77 586179000 H20 screw-on bracket for formwork sheets 0.19 586256000
Haltekopf H20 DF Schalhaut-Schraubwinkel H20
Galvanised Galvanised
Length: 19 cm Height: 19.2 cm
Width: 11 cm
Height: 8 cm
Doka floor end-shutter clamp 12.5 586239000 Doka coil 16mm 0.009 588633000
Doka-Deckenabschalklemme
Doka-Coil 16mm
Galvanised
Galvanised
Height: 137 cm
Diameter: 1.6 cm
Scaffold tube 48.3mm 0.50m 1.7 682026000 Universal dismantling tool 3.7 582768000
Scaffold tube 48.3mm 1.00m 3.6 682014000 Universal-Lösewerkzeug
Scaffold tube 48.3mm 1.50m 5.4 682015000 Galvanised
Scaffold tube 48.3mm 2.00m 7.2 682016000 Length: 75.5 cm
Scaffold tube 48.3mm 2.50m 9.0 682017000
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000
Scaffold tube 48.3mm 5.00m 18.0 682023000
Scaffold tube 48.3mm 5.50m 19.8 682024000
Scaffold tube 48.3mm 6.00m 21.6 682025000 Box nut 19 1/2" L 0.16 580598000
Stecknuss 19 1/2" L
Scaffold tube 48.3mm .....m 3.6 682001000
Gerüstrohr 48,3mm
Galvanised
F
E H
G
A
I
J
M
L
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
¡¡ site logistics optimised by reducing the number of cranes ¡¡ the tables can be positioned quickly and easily, in a few
and the crane times simple steps
¡¡ the self-climbing Table Lifting System lets work proceed ¡¡ table areas of up to 12.5 m² can be repositioned by just one
completely independently, without crane assistance, at any man working on his own
height ¡¡ craneless vertical repositioning of tableforms up to the next
floor in only 20 seconds with the Table Lifting System TLS
High safety
provided by integral safety features
The Dokamatic lifting strap 13.00m can be used for hoisting Using the Dokamatic lifting strap, the Dokamatic tables can be
tableform superstructures and ready-to-use tables. The 13 m quickly lifted off the loading platform and up to the next level.
long strap is designed so that the crew can easily and safely fix
it and detach it when working from ground level.
The Table Lifting System TLS saves precious crane time. This
frees up the crane for other work, in turn speeding up the
whole progress of construction. The TLS also helps to speed
up work by making the site independent of the wind conditions.
Table repositioning operations can continue unhindered even
in windier conditions – and in great safety. The ‘DoKart plus’
makes it possible for one man to travel the tableforms to and
from the TLS, quickly and easily. The interoperable shifting
devices allow efficient use of manpower, and fast construction
progress.
The Table Lifting System TLS can also be stood on the ground,
making it possible to start repositioning tables right from the
very first storey.
Only a few simple steps are needed to modify the TLS and turn As well as the crane-lifted version of the TLS that is suspended
it into a climbing unit that is suspended from the floor-slab. from the slab, the TLS can also be used as a self-climbed
As soon as the TLS is hung into place and fixed, you can start system for any height of structure. The self-climbing solution
work right away on lifting the Dokamatic tables up to the next delivers even more crane-time savings and safety on the site,
floor. In this way, even the tallest buildings can be formed as the TLS can now be ‘jumped’ 100% automatically. The self-
safely and quickly, independently of both wind conditions and climbing TLS is the perfect add-on to Doka tableforms and to
crane availability, using Doka tableforms. protection screens at the slab-edges. This equipment line-up is
the ideal slab formwork solution for tall structures.
Extension clamp H20 for fork 1.5t 4.5 586236000 Lifting hook DF 5.9 586077000
Aufsatzklemme H20 für Gabel 1,5t Umsetzbügel DF
Galvanised Galvanised
Height: 45 cm Length: 42 cm
Width: 20 cm
Height: 36 cm
Follow the directions in the "Operat-
ing Instructions"!
Extension profile H20 for fork 1.5t 34.1 586237000
Aufsatzprofil H20 für Gabel 1,5t
Galvanised Table Lifting System TLS
Length: 83 cm
Height: 52 cm Basic unit TLS 2336.0 586301000
Basiseinheit TLS
Length: 431 cm
Width: 242 cm
Height: 274 cm
Follow the directions in the "Operat-
Lifting extension bracket DF 1t 263.0 586068000 ing Instructions"!
Ausleger DF 1t
Galvanised
Length: 336 cm
Width: 66 cm
Height: 309 cm
Delivery condition: folded closed
Follow the directions in the "Operat-
ing Instructions"! Lifting platform TLS centre 3.00x1.60m 310.0 586307000
Hubbühne TLS mitte 3,00x1,60m
Lifting extension bracket DF 1.5t 475.0 586064000 Height: 139 cm
Ausleger DF 1,5t
Galvanised
Length: 456 cm
Width: 82 cm
Height: 386 cm
Delivery condition: folded closed
Follow the directions in the "Operat-
ing Instructions"!
Lifting platform TLS back 3.00x1.60m 376.0 586308000
Hubbühne TLS hinten 3,00x1,60m
Height: 139 cm
Lifting mast TLS 1.50m 82.0 586328000 Lifting mast anchoring TLS wall 15.5 586372000
Hubmast TLS 1,50m Hubmastverankerung TLS Wand
Galvanised Galvanised
Length: 52 cm
Landing level safety gate TLS w. limit switch 32.0 586322000 Lifting beam TLS 62.0 586326000
Etagentüre TLS mit Endschalter Hebeträger TLS
Length: 153 cm Galvanised
Height: 126 cm Length: 325 cm
Tool box TLS 17.0 586337000 Maintenance toolbox TLS 6.1 586369000
Werkzeugbox TLS Wartungs-Werkzeugbox TLS
consisting of: consisting of:
(A) Combination wrench 8 0.03 586343000 (A) Grease cartridge TLS 0.46 586368000
2 pcs. (B) Filling press TLS 0.93 586367000
(B) Combination wrench 10 0.04 586342000 (C) Thickness gauge set 0.05-1.00mm 0.09 586350000
2 pcs. (D) Pliers for external circlips 40-100mm 0.32 586348000
(C) Combination wrench 13 0.06 586341000 (E) Water pump nut pliers 250mm 0.32 586347000
2 pcs. (F) Screw dr. f. recessed-head scr. PZ 2 0.15 586351000
(D) Combination wrench 17 0.16 586340000 (G) Combination wrench 14 0.09 586349000
2 pcs. (H) Digital multimeter TLS 0.22 586353000
(E) Combination wrench 19 0.14 582837000 (I) Dummy plug TLS 4 poles 0.04 586352000
2 pcs.
(F) Combination wrench 22 0.20 582838000
2 pcs.
(G) Combination wrench 24 0.25 582839000
2 pcs.
(H) Combination wrench 30 0.43 582840000
2 pcs.
(I) Reversible ratchet 3/4" 1.5 580894000
Galvanised
Length: 50 cm
(J) Box nut 50 3/4" 0.81 581449000
(K) Universal cone spanner 15.0/20.0 0.90 581448000
Galvanised
Length: 9 cm
Width-across: 50 mm Brake-disc pull-off tool TLS D200 4.3 586370000
(L) Box nut 24 1/2" L 0.30 586364000 Scheibenabzieher TLS D200
(M) Extension 20cm 3/4" 0.68 580683000 Height: 27 cm
(N) Set of ball-head hexagon-socket screw keys 0.60 586346000 Width-across: 22 mm
(O) Slot-screw screwdriver 0.6x3.5 0.20 586344000
(P) Slot-screw screwdriver 1x5.5 0.20 586366000
(Q) Box spanners 1/2" set of 29 5.6 586345000
(R) Box nut 19 3/4" 0.23 586375000
(S) Box nut 24 3/4" 0.21 500679030
(T) Box nut 27 3/4" 0.27 586376000
(U) Box nut 30 3/4" 0.33 586377000
Q
M
U
T
S
R O
Residential,
highrise, bridges,
tunnels, power
stations, ...
Discover the diversity
of Doka’s top
Doka Floor Systems
worldwide projects
with Google Maps.
www.doka.com/topprojects
309
Panel floor formwork
Dokadek 30
The beamless handset system for speed on site
Dokadek 30 is a beam-less, hand-set formwork system designed as a lightweight steel construction with powder-coated frames
faced with a wood/plastic-composite sheet. Dokadek 30 combines the advantages of a panel floor formwork system with those of
Dokaflex floor-slab formwork, that means its 3 m² large panels make it fast in typical zones, yet – thanks to Dokaflex – it is also
quick and flexible in the infill zones. Dokadek 30 - with or without drop-head: Slab formwork at its most evolved.
Short assembly and disassembly times ¡¡ no need to calculate or measure up, as the positions and
¡¡ The typical zones are formed simply by tilting up the beam- numbers of props and panels are all made clear by the
less panels, each of up to 3 m² in area system
¡¡ Meshes seamlessly with Dokaflex for time-saving closing of ¡¡ safe to operate, even for semi-skilled crew, as the sequence
infill zones of worksteps is pre-defined
¡¡ Can be connected directly to Dokaflex, allowing grid- ¡¡ short introductory training times as the system only has a
independent adaptation to any layout small number of different parts
¡¡ Uncluttered logistics, as there are only 2 sizes of panel: ¡¡ horizontal repositioning of 12 m² of Dokadek 30 on the
2.44 x 1.22 m and 2.44 x 0.81 m DekDrive – even through narrow doorways and access
¡¡ The intermeshing work sequence means both members of openings
2-man forming crews are always occupied
Extra-safe working
as the system is set up working from the ground
Doka
dek 3
0
Augmented reality (AR)
Download the Dokadek app for your iPad, aim the iPad at the
AR marker and try out Dokadek 30 virtually by dragging the
panels to the right places. You’ll find the link to the App Store
www
.d o k a
with the free Dokadek app at www.doka.com/dokadek30. .c o m
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 311
System
Panel with Xlife sheet
The standard head for holding the panels firmly. The integral
anti-liftout guard prevents any of the panels accidentally
falling off, and makes extra precautions (such as wind bracing)
unneccessary.
Dokadek XF drop-head
312 | Panel floor formwork Dokadek 30 | Panel floor formwork | Doka Floor Systems
Easy, back-friendly working, from floor-
level.
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 313
Utilisation
One system, three working methods
You decide the best time to strip the formwork. Free choice of working method: How you use Dokadek 30 is up to you, depending
on the requirements.
40
36
32
28
24
20
16
12
0
28.3. 29.3. 30.3. 31.3. 1.4. 2.4. 3.4. 4.4. 5.4. 6.4. 7.4. 8.4. 9.4. 10.4. 11.4.
How to use the standard system Earlier stripping with the Dokadek 30 Traditional early stripping with drop-head
standard system, based on proof of actual
concrete strength
Fetch the Dokadek panel, The floor prop is fitted ... Formwork removal takes a
hang it into place and raise very short time
the free end
When the panels are hung into place, the ... by the second man. The Doka floor with no strenuous overhead work, and
Dokadek heads ensure that they engage prop Eurex 30 top is a rugged, tried-and- from the safety of floor level. With the
safely and are firmly fixed. At the usual tested product. And with its high thread formwork-removal procedure made possi-
heights, the free ends of the panels are pitch, it can be backed off very easily at ble by Dokadek 30, overall forming-times
raised with the Dokadek assembling a later stage – even when it is under full can be greatly reduced. This brings added
tool, while at greater heights the DekLift load. productivity.
4.50m is used.
314 | Panel floor formwork Dokadek 30 | Panel floor formwork | Doka Floor Systems
Method 1 plus – without drop-head and with proof of concrete strength
40
36
32
28
24
20
16
12
0
28.3. 29.3. 30.3. 31.3. 1.4. 2.4. 3.4. 4.4. 5.4. 6.4. 7.4. 8.4. 9.4. 10.4. 11.4.
and fit the floor props. For the ‘without based on proof of actual concrete Stripping is carried out based on
drop-head and with proof of concrete strength. In practice, the release strength measured data. The actual strength
strength’ method, Dokadek 30 is erected can be verified with the following meth- values obtained in Step 2 can be used to
in the same way as for Method 1. ods: test cube, rebound hammer and determine the earliest possible time of
maturity calculation. formwork removal. This speeds up the
construction process.
Engage panel – raise free end – put up Reclaim equipment for re-use much Safely supported – right to the end of the
props. In the ‘Dokadek 30 with drop- sooner: Hammering on the red lowering job. The floor-slab stays safely shored
head’ method, too, the formwork is set up wedge quickly detaches the panels from with the Doka ‘Eurex 30 top’ floor props
safely and easily, working from floor-level. the concrete, then tilt down and remove until the required concrete strength has
The closure panels are then inserted from the panels, and take out the closure been reached.
above, but because these are so narrow panels; these items can now be re-used
(only 15 cm wide) there is no need for any in the next casting section.
additional fall-hazard precautions.
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 315
References
Using Panel floor formwork
Dokadek 30, it took less
than only two months to
form 5630 m² of slab for the
two basement levels of the
Venissy residential and office
building in Lyon. Contractors
Pitance were delighted with
the high-class concrete
finishes they achieved.
The system also provided
quick and easy solutions to
project-specific challenges
such as a one-percent
gradient, and zones where a
thicker slab was required.
316 | Panel floor formwork Dokadek 30 | Panel floor formwork | Doka Floor Systems
The big, 3 m² Dokadek 30
panels make for high-speed
forming of large areas, as
there are far fewer parts to
be shifted. Their rectangular
format also makes it easy to
form higher slabs quickly,
from the safety of floor-level
work.
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 317
Article list
[kg] Article n° [kg] Article n°
Doka Floor
Panel floor formwork
Systems Dokadek 30
Dokadek panel 1.22x2.44m 49.9 586501000 Removable folding tripod top 12.0 586155500
Dokadek panel 0.81x2.44m 40.1 586502000 Stützbein top
Dokadek-Element Galvanised
Galvanised Height: 80 cm
Powder-coated yellow Delivery condition: folded closed
318 | Panel floor formwork Dokadek 30 | Panel floor formwork | Doka Floor Systems
[kg] Article n° [kg] Article n°
Dokadek wall head 4.3 586536000 Dokadek infill beam 2.44m 18mm 16.9 586509000
Dokadek-Wandkopf Dokadek infill beam 1.22m 18mm 8.7 586510000
Galvanised Dokadek infill beam 0.81m 18mm 6.0 586511000
Height: 56 cm Dokadek infill beam 2.44m 21mm 16.6 586512000
Dokadek infill beam 1.22m 21mm 8.5 586513000
Dokadek infill beam 0.81m 21mm 6.0 586514000
Dokadek infill beam 2.44m 27mm 16.7 586515000
Dokadek infill beam 1.22m 27mm 8.6 586516000
Dokadek infill beam 0.81m 27mm 5.7 586517000
Dokadek-Ausgleichsträger
Galvanised
Powder-coated yellow
Dokadek cross head 2.6 586543000 Dokadek handrail-post shoe long 10.1 586520000
Dokadek-Kreuzkopf Dokadek-Längsgeländerschuh
Galvanised Galvanised
Height: 32 cm Length: 125 cm
Height: 66 cm
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 319
[kg] Article n° [kg] Article n°
Dokadek assembling tool extension 2.00m 1.5 586538000 Wheel-around scaffold DF 44.0 586157000
Dokadek-Montagestangenverlängerung 2,00m Mobilgerüst DF
Aluminium Aluminium
Length: 185 cm
Width: 80 cm
Height: 255 cm
Delivery condition: folded closed
Follow the directions in the "Operat-
ing Instructions"!
320 | Panel floor formwork Dokadek 30 | Panel floor formwork | Doka Floor Systems
[kg] Article n° [kg] Article n°
Doka Floor Systems | Panel floor formwork | Panel floor formwork Dokadek 30 | 321
Dokaflex 30 tec
The timber-beam slab formwork system that minimises costs-per-use
Dokaflex 30 tec is a hand-set formwork system for floor-slabs that scores for its low costs-per-use. Used as a primary, the high-
load I tec 20 formwork beam allows the props to be spaced much further apart. As less equipment is used for the same area of
formwork, the system takes 15 percent less time to set up, and the equipment and logistics costs are also lower.
Cuts the work needed for erection and dismantling, as there No need to change systems during construction, as it
are ¡¡ adapts flexibly to any layout and slab thickness
¡¡ one-third fewer floor props to line-and-level ¡¡ allows easy forming of downstand beams, floor extensions
¡¡ far fewer separate parts to be moved and filigree slabs
¡¡ is safe to combine with Doka load-bearing towers for greater
slab heights
¡¡ gives you unlimited form-facing options in terms of format
Cuts equipment- and freight costs and type of sheet
as less equipment needs to be commissioned for any given
area to be formed
Beam I tec 20
Beam H20 top
ProFrame panel
Floor prop Eurex top
Edge protection system XP
Beam H20 top
ProFrame panel
The wide spaces left between the floor props, and the fact
that far fewer system components are needed, make for
fast workflows. Flexible adaptation to any layout, and to slab
thicknesses of up to 50 cm, is solved within the system. Free
choice of form-facing permits any specified concrete finish.
Doka floor prop Eurex 20 top 150 8.0 586096000 Lowering head H20 6.1 586174000
Length: 92 - 150 cm Absenkkopf H20
Doka floor prop Eurex 20 top 250 12.7 586086400 Galvanised
Length: 148 - 250 cm Length: 25 cm
Doka floor prop Eurex 20 top 300 14.3 586087400 Width: 20 cm
Length: 173 - 300 cm
Height: 38 cm
Doka floor prop Eurex 20 top 350 17.4 586088400
Length: 198 - 350 cm
Doka floor prop Eurex 20 top 400 21.6 586089400
Length: 223 - 400 cm
Doka floor prop Eurex 20 top 550 32.3 586090400
Length: 298 - 550 cm
4-way head H20 4.0 586170000
Doka floor prop Eurex 20 top 700 48.0 586139000 Vierwegkopf H20
Length: 383 - 700 cm Galvanised
Doka-Deckenstütze Eurex 20 top
Length: 25 cm
Galvanised
Width: 20 cm
Height: 33 cm
Lifting bracket 6.2 580460000 Plug for closure plate R25 0.003 588187000
Kranöse Ausgleichsblechstopfen R25
Galvanised Black
Height: 59 cm Diameter: 3 cm
F
E H
G
End-shutter shoe 1.6 586257000
Abschalschuh A
Galvanised I
Height: 13.5 cm
J
End-shutter tie rod 15.0 15-40cm 0.91 586258000 M
Abschalanker 15,0 15-40cm L
Galvanised
Length: 55 cm Universal dismantling tool 3.7 582768000
Universal-Lösewerkzeug
Galvanised
Length: 75.5 cm
Alu beam fork H20 2.4 586182000 ProFrame panel 27mm 200/50cm 13.5 187178000
Alu-Trägergabel H20 ProFrame panel 27mm 200/50cm BS 13.5 187178100
Aluminium ProFrame panel 27mm 250/50cm 16.9 187177000
Powder-coated yellow ProFrame panel 27mm 250/50cm BS 16.9 187177100
ProFrame-Paneel 27
Length: 176 cm
Near to you,
worldwide.
The Doka Formwork
Experts are there to
help you, at more
than 160 branches.
Doka Floor Systems
www.doka.com/locations
331
Doka Xtra
The fast floor-slab formwork with integrated ‘stripping logic’
This value-for-money, high-speed system has a pre-defined stripping sequence which evens out the site crew’s workload. Any type
of form-facing can be used, enabling all architectural wishes regarding the concrete surface to be met.
The advantages are plain to see: the bulk of the formwork Beam H20 top
equipment can be struck ahead of time and re-used ProFrame panel
immediately in the next casting section. Floor prop Eurex top
Edge protection system XP
ProFrame panel
The Doka Xtra floor system Floor slab with Doka Xtra
permits early striking, and formwork still in place
so speeds up the whole
workflow.
Step 1 Step 3
Step 2 Step 4
Integrated stripping-logic
A total of 18,500 m² of
Doka Xtra floor-slab system
was in action at this site.
Doka handrail clamps were
mounted to safeguard the
slab-edges.
Doka floor prop Eurex 20 top 150 8.0 586096000 Doka Xtra head 9.7 586108000
Length: 92 - 150 cm Doka Xtra-Kopf
Doka floor prop Eurex 20 top 250 12.7 586086400 Galvanised
Length: 148 - 250 cm Height: 69 cm
Doka floor prop Eurex 20 top 300 14.3 586087400
Length: 173 - 300 cm
Doka floor prop Eurex 20 top 350 17.4 586088400
Length: 198 - 350 cm
Doka floor prop Eurex 20 top 400 21.6 586089400
Length: 223 - 400 cm
Doka floor prop Eurex 20 top 550 32.3 586090400
Length: 298 - 550 cm Supporting head H20 DF 0.77 586179000
Doka-Deckenstütze Eurex 20 top Haltekopf H20 DF
Galvanised Galvanised
Length: 19 cm
Width: 11 cm
Height: 8 cm
Mobile scaffold tower Z Doka beam H20 top P 2.65m 14.3 189703000
Fahrgerüst Z Doka-Träger H20 top P 2,65m
consisting of: Varnished yellow
(A) Attachable frame Z 1.00m 6.7 586016000
(B) Attachable frame Z 2.00m 11.3 586017000
(C) Railing frame Z 1.00m 4.1 586021000
(D) Handrail post Z 1.80m 6.5 586022000
(E) Platform Z with manhole flap 1.80m 17.5 586023000
(F) Platform Z without manhole flap 1.80m 17.0 586024000
(G) End toe-board Z 1.35m 4.0 586025000
(H) Side toe-board Z 1.80m 5.1 586026000
(I) Diagonal brace Z 2.00m 3.0 586027000
(J) Horizontal brace Z 1.80m 2.8 586028000
(K) Triangular bracket Z 5.3 586029000
(not illustrated)
ProFrame panel 21mm 200/50cm 11.0 186118000
ProFrame panel 21mm 200/50cm BS 11.0 186118100
(L) Guide roller Z D200mm 7.1 586030000 ProFrame panel 21mm 250/50cm 13.8 186117000
(M) Step-up rung Z 2.5 586031000 ProFrame panel 21mm 250/50cm BS 13.8 186117100
(N) Platform diagonal strut Z 2.5 586032000 ProFrame-Paneel 21
(not illustrated)
(O) Ballast Z 10.0 586033000
(not illustrated) ProFrame panel 27mm 200/50cm 13.5 187178000
Aluminium ProFrame panel 27mm 200/50cm BS 13.5 187178100
D C
Follow the directions in the "Instruc- ProFrame panel 27mm 250/50cm 16.9 187177000
tions for assembly and use"! ProFrame panel 27mm 250/50cm BS 16.9 187177100
ProFrame-Paneel 27
F
E H
G Doka personal fall-arrest set 3.6 583022000
Doka-Sicherheitsgeschirr
A Follow the directions in the "Operat-
I ing Instructions"!
J
M
L
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Alu beam fork H20 2.4 586182000
Alu-Trägergabel H20
Aluminium
Powder-coated yellow
Length: 176 cm
Simply more
opportunities.
Build your future on a
strong foundation and
launch your career at
Doka.
Doka Floor Systems
www.doka.com/careers
341
Dokaflex 1-2-4
The fast, versatile hand-set system
Dokaflex 1-2-4 is the fast, versatile floor-slab formwork for any desired layout. The quantities are computed very simply, using the
slide-rule, with no need for formwork planning. Meeting individual requirements regarding the concrete finish is no problem, as any
type of form-facing can be chosen.
¡¡ downstand beams and floor extensions can easily be solved ¡¡ high numbers of re-use cycles and reduced close-out costs,
‘within the system’ due to the shock absorbers and protectors on the system
¡¡ perfect adaptability to columns and walls components
¡¡ optimising for different slab thickness ¡¡ site logistics are simplified by the perfectly co-ordinated
¡¡ suitable for shoring filigree slabs system components
¡¡ first-rate concrete surfaces, as any type of form-facing can
be selected
ProFrame panel
This quick and easy system solution for stop-ends provides The Beam forming support 20 lets you quickly and accurately
greater safety at the edges of floor-slabs, and high flexibility, adjust the formwork for downstand beams, right down to
with a choice of different attachment methods, types of stop- the last millimetre. To do this, the Beam forming support is
end and ways of safeguarding slab edges. simply placed onto the secondary beams and tightened. This
automatically pulls the side-formwork tight, for clean concrete
faces.
Doka floor prop Eurex 20 top 150 8.0 586096000 Removable folding tripod top 12.0 586155500
Length: 92 - 150 cm Stützbein top
Doka floor prop Eurex 20 top 250 12.7 586086400 Galvanised
Length: 148 - 250 cm Height: 80 cm
Doka floor prop Eurex 20 top 300 14.3 586087400 Delivery condition: folded closed
Length: 173 - 300 cm
Doka floor prop Eurex 20 top 350 17.4 586088400
Length: 198 - 350 cm
Doka floor prop Eurex 20 top 400 21.6 586089400
Length: 223 - 400 cm
Doka floor prop Eurex 20 top 550 32.3 586090400 Removable folding tripod 1.20m 20.7 586145000
Length: 298 - 550 cm Stützbein 1,20m
Doka-Deckenstütze Eurex 20 top Galvanised
Galvanised Height: 120 cm
Delivery condition: folded closed
Secondary-beam stabiliser 1 1.6 586196000 Plug for closure plate R25 0.003 588187000
Secondary-beam stabiliser 2 2.1 586197000 Ausgleichsblechstopfen R25
Querträgersicherung Black
Galvanised Diameter: 3 cm
Height: 38.7 cm
Extension for beam forming support 60cm 4.4 586149000 Mobile scaffold tower Z
Balkenaufsatz 60cm Fahrgerüst Z
Galvanised consisting of:
(A) Attachable frame Z 1.00m 6.7 586016000
(B) Attachable frame Z 2.00m 11.3 586017000
(C) Railing frame Z 1.00m 4.1 586021000
(D) Handrail post Z 1.80m 6.5 586022000
(E) Platform Z with manhole flap 1.80m 17.5 586023000
(F) Platform Z without manhole flap 1.80m 17.0 586024000
(G) End toe-board Z 1.35m 4.0 586025000
(H) Side toe-board Z 1.80m 5.1 586026000
Doka floor end-shutter clamp 12.5 586239000
Doka-Deckenabschalklemme (I) Diagonal brace Z 2.00m 3.0 586027000
Galvanised (J) Horizontal brace Z 1.80m 2.8 586028000
F
End-shutter shoe 1.6 586257000 E H
Abschalschuh G
Galvanised
Height: 13.5 cm A
I
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
www.doka.com/language
351
Doka Climbing Systems
The safe way to great heights
Doka’s modular system, based on its decades-long experience of widely differing construction
tasks, means that it can deliver the right climbing technology solution across the entire architec-
tural spectrum. For both crane-lifted and crane-independent solutions, the principle is always the
same: a high standard of safety, combined with high cost effectiveness and easy, safe handling.
The right Doka solution is a key factor in obtaining a fast construction workflow.
¡¡ safe, weather-shielded working made possible by the large, ¡¡ saves on craneage, as the platform can also transport high
fully enclosed workspace payloads, including equipment containers and concrete
¡¡ prevents fall-hazard locations opening up during reposition- placing booms, when it climbs
ing, as the entire platform is raised hydraulically in one lift ¡¡ can be adapted to any requirement, thanks to its modular
¡¡ integrated platforms, stair towers and ladders provide com- system and to the fact that there are several different ways
plete safety during working operations and for up-and-down of suspension-mounting it to the structure
access ¡¡ optimised construction sequences achieved by the planning
and engineering services of the Doka-Competence Centre
Rapid working
in a systematic sequence
CE marking
Edge protection system XP
Stair tower 250
Ladder system XS
The high service loads that are possible on the Platform SCP save storage space on the site at ground level. For even faster cycle
times, the reinforcement operations can also be carried out above the platform. The system makes it possible to suspend working
platforms that reach deep down into the shafts, enabling the crew to start carrying out finishing-jobs while the concreting works are
still underway.
Upwards at the push of a button Ample space and safety, at any height
Together with the working platform, timber-beam or framed The generous striking-distances and ingenious platform system Doka Climbing Systems
formworks are raised to the next casting section in a single lift, permit “Safe. Fast. Efficient.” working, just like on the ground.
by powerful hydraulic cylinders.
¡¡ as a highly efficient system-based ‘construction kit’, it can ¡¡ saves on craneage, as payloads can also be raised along
be adapted to any shape of layout and any structure height with the platforms when these are ‘climbed’
¡¡ the freely plannable parallel climbing units also make the ¡¡ craneless climbing made possible at any time, by all-
system suitable for varying wall inclinations and wall-returns hydraulic repositioning right from the very first casting step
¡¡ the practical standard solutions provide ample workspace on ¡¡ optimised construction workflows achieved by flexible
shaft formwork units cycling of the units for repositioning
Rapid working
coupled with high safety
CE marking
Edge protection system XP
Stair tower 250
Ladder system XS
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE plus | 361
System
Automatic climbing formwork SKE50 plus Automatic climbing formwork SKE100 plus
Automatic climbing formwork SKE50 plus, with a load capacity This is the design variant with rising working platforms,
of 5 t per parallel climbing unit, is the ideal solution for many enabling work to proceed simultaneously on several levels.
different types of assignment. As well as for forming high-rise This allows the forming and rebar operations to be ‘de-linked’,
cores, industrial structures, bridge piers and pylons, this in- so as to shorten the cycle times. The high load capacity of
novative system can also be used for constructing facades. 10 t per climbing unit also makes it possible to reposition extra
payloads such as reinforcement steel, containers and concrete
placing booms.
362 | Automatic climbing formwork SKE plus | Automatic climbing formwork | Doka Climbing Systems
SKE50 plus with shaft system SKE100 plus with mast system
When inside-shafts need to be formed cranelessly, this shaft This system combines high load capacity with generous
system greatly boosts the speed of work. Exact adaptability, workspace. As the system only needs to be anchored in one
straightforward formwork operation, combinability with the wall, the mast system can be used not only in shafts but also
Framax stripping corner I, re-useable anchoring components – for forming simple walls and even ‘single-pour’ walls + floor-
these are just some of the many advantages of this innovative slabs.
system.
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE plus | 363
References
A 3100 m long motorway
bridge in Vladivostok has
linked the city to Russkiy
Island since autumn 2012.
Its pylon height of 320 m
and clear span of 1104 m
broke two world records at
once.
364 | Automatic climbing formwork SKE plus | Automatic climbing formwork | Doka Climbing Systems
The 100 m tall heat-
exchanger tower of the
Leube cement plant was
raised in 3-day cycles. The
four wall segments of the
tower were constructed
using 28 SKE automatic
climbers and 600 m² of
large-area formwork.
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork SKE plus | 365
Automatic climbing formwork
Xclimb 60
The crane-independent climbing formwork for structures of uncomplicated shape
and of any height
Automatic climbing formwork Xclimb 60 is a hydraulically climbed system that can also be quickly raised by crane if sufficient
craneage is available. Because it is guided on the structure at all times, the system can still be climbed even in windy conditions.
¡¡ modular system components allow it to be used as ¡¡ saves on craneage, as payloads can also be raised along
formwork for high-rise cores, piers and facades, or as a with the platforms when these are ‘climbed’
protection screen ¡¡ it does not take long to familiarise the crew with the repo-
¡¡ greater choice regarding construction sequences, as the sitioning procedure, as the hydraulic system is so easy to
system can be reset either by crane or by a portable hydrau- operate
lic system ¡¡ the lightweight hydraulic cylinders and guiding-shoes mean
¡¡ easy to adapt to different weather conditions, as it permits that work requires less physical effort
several different types of enclosure
High safety
in every phase of the work
CE marking
Edge protection system XP
Protection screen Xclimb 60
Ladder system XS
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60 | 367
System
The system is self-climbed up to the next casting section using The lightweight, quick-mount hydraulic cylinders with the lifting
portable hydraulic components. Finishing-work platforms can mechanism make for dependable raising of the climbing scaf-
be attached anywhere on the scaffold. fold, complete with the formwork. During the climbing phase,
the system is firmly linked to the structure at all times, via its
‘Guiding shoes’. This allows repositioning to continue even in
high winds.
368 | Automatic climbing formwork Xclimb 60 | Automatic climbing formwork | Doka Climbing Systems
Utilisation
Easy to get right first time
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60 | 369
References
To make sure of meeting
the 19-month completion
deadline for The Metropolis,
an approx. 100 m tall office
and administration high-rise,
many different Doka form-
work systems have been
fielded. On the structure
cores, Automatic climb-
ing formwork Xclimb 60
is effortlessly meeting the
requirements for safety and
fast cycle times.
370 | Automatic climbing formwork Xclimb 60 | Automatic climbing formwork | Doka Climbing Systems
This refuse and sewage-
sludge incineration plant in
Krefeld was enlarged with a
new refuse and slag bunker
and a 53 m tall stairwell. To
ensure reliable forming of
the 4 m high casting cycles
in a weekly rhythm, Auto-
matic climbing formwork
Xclimb 60 was used in con-
junction with shaft platforms
in the stairwell core.
Doka Climbing Systems | Automatic climbing formwork | Automatic climbing formwork Xclimb 60 | 371
Cooling-tower formwork SK175
The self-climbing formwork for cooling towers
This cooling-tower formwork is a fully mechanised, self-climbing large-area formwork system. It maximises rationalisation and
minimises manual labour – after a short familiarisation period, the crew will soon be accomplishing the casting sections in a 1-day
cycle.
Rapid working
in a controlled sequence
CE marking
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175 | 373
System
Cooling-tower formwork SK175
374 | Cooling tower formwork SK175 | Automatic climbing formwork | Doka Climbing Systems
Utilisation
Down to a vertical radius of 70 m, the cooling-tower formwork Working from the top platform, the reinforcement can be
can climb through curves unhindered. Up to a 22° angle of placed a day in advance. The reinforcements are held in posi-
inclination, the formwork is adjusted simply by the platform tion during placement by reinforcement holders mounted on
system, with one spindle per bracket. the scaffold.
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175 | 375
References
376 | Cooling tower formwork SK175 | Automatic climbing formwork | Doka Climbing Systems
Doka Climbing Systems
The environmental refit to the Sostanj coal-fired power station
aims to cut greenhouse gases and CO2emissions by around
35 percent. With its Cooling-tower formwork SK175, Doka is
helping work to progress swiftly, safely and efficiently on the
building of a new 164.5 m high cooling tower for the plant’s
600 MW Unit 6.
Doka Climbing Systems | Automatic climbing formwork | Cooling tower formwork SK175 | 377
Guided climbing formwork
Xclimb 60
The structure-attached crane-lifted climbing system
The Guided climbing formwork Xclimb 60 is a system that is guided on vertical profiles fixed to the structure, even during reposi-
tioning. The entire climbing unit is safely and easily repositioned in a single crane cycle, even during high winds.
¡¡ modular system components allow it to be used as ¡¡ saves on craneage, as payloads can also be raised along
formwork for high-rise cores, piers and facades, or as a with the platforms when these are ‘climbed’
protection screen ¡¡ less crane-time needed, as the climbing scaffold and form-
¡¡ subsequent finishing-work is speeded up by having up to work are moved up as a single unit
two freely plannable follow-up platforms ¡¡ the lightweight guiding-shoes mean that work requires less
¡¡ easy to adapt to different weather conditions, as it permits physical effort
several different types of enclosure
High safety
in every phase of the work
Doka Climbing Systems | Crane-lifted climbing formwork | Guided climbing formwork Xclimb 60 | 379
System
One crane-lift cycle is all it takes to raise the climbing scaffold The system is firmly attached to the structure by the vertical
(incl. formwork), swiftly and independently of the wind condi- profile and the guiding shoe, in every phase of every cycle.
tions, as it is guided up the side of the structure. During repositioning, the vertical profile is always safely guided
in at least two ‘Guiding shoes’.
380 | Guided climbing formwork Xclimb 60 | Crane-lifted climbing formwork | Doka Climbing Systems
Utilisation
Easy to get right first time
Highly versatile
Doka Climbing Systems | Crane-lifted climbing formwork | Guided climbing formwork Xclimb 60 | 381
Climbing formwork MF240
The crane-jumped formwork for structures of any shape and height
Climbing formwork MF240 permits controlled, regular working cycles on all structures such as high-rises, bridge piers and pylons.
The system is simple to operate, copes with wall inclinations of up to 15 degrees and can be dimensioned to many different
requirements over a wide applicational range.
¡¡ safe working conditions provided by fully railed-in 2.40 m ¡¡ universal system concept permits adaptation to any shape
wide working platform of structure
¡¡ formwork can be rolled back 0.75 m, leaving plenty of space ¡¡ adjustable brackets also allow use on walls with varying
for the forming and reinforcing operations inclinations
¡¡ safe up-and-down access between platforms provided by ¡¡ small number of suspension points, thanks to the brackets’
integrable ladder system high load-bearing capacity
Easy to handle
saving time and resources
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240 | 383
System
384 | Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
Utilisation
Safe working conditions
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240 | 385
References
The conical-cylindrical foun-
dations for the offshore wind
turbines on Belgium’s Thorn-
ton Sandbank were pre-cast
highly efficiently on land,
using Climbing formwork
MF240. After completion,
the hollow-bodied structures
were towed to the erection
location and lowered onto
the seabed at a depth of
down to 27 m.
386 | Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
A truly superlative football
arena, with space for
68,000 spectators, was built
in Cape Town: the Green-
point Stadium. To construct
the spectator terraces, the
contracting JV opted for
efficient formwork solutions
from Doka.
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240 | 387
Article list
[kg] Article n° [kg] Article n°
Doka Climbing
Climbing formwork
Systems
MF240
Horizontal profile MF with handrail post 88.5 581618000 Pressure spindle MF240 26.0 580680000
Horizontalprofil MF mit Geländer Druckspindel MF240
Galvanised Galvanised
Length: 251 cm Height: 166 - 226 cm
Height: 155 cm
388 | Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
[kg] Article n° [kg] Article n°
Vertical waling extension MF 41.5 580659000 Starter block unit MF 23.2 580678000
Fahrriegelverlängerung MF Grundblockriegel MF
Galvanised Galvanised
Height: 144 cm Length: 143 cm
Width: 19 cm
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240 | 389
[kg] Article n° [kg] Article n°
Doka 4-part chain 3.20m 15.0 588620000 Warning sign "No entry" 300x300mm 0.70 581575000
Doka-Vierstrangkette 3,20m Verbotsschild "Zutritt Verboten" 300x300mm
Follow the directions in the "Operat-
ing Instructions"!
390 | Climbing formwork MF240 | Crane-lifted climbing formwork | Doka Climbing Systems
[kg] Article n° [kg] Article n°
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Doka Climbing Systems | Crane-lifted climbing formwork | Climbing formwork MF240 | 391
Climbing formwork K
The crane-jumped formwork assembled from a Folding platform K and a formwork
element
The climbing formwork system for structures that need the formwork elements to be moved up in several casting sections. With
only two accessories, the Folding platform K can be turned into a fully functional crane-jumped formwork directly on the site.
Easy to handle
saving time and resources
Folding platform K
Edge protection system XP
The Folding platform K can be combined with any Doka wall Ladder system XS
formwork system to make the versatile Climbing formwork K,
using only two accessories (a suspended platform and connec-
tion shoes).
Doka folding platform K 3.00m 291.5 580442000 Scaffold tube 48.3mm 0.50m 1.7 682026000
Doka folding platform K 4.50m 444.5 580443000 Scaffold tube 48.3mm 1.00m 3.6 682014000
Doka-Faltbühne K Scaffold tube 48.3mm 1.50m 5.4 682015000
Timber parts varnished yellow Scaffold tube 48.3mm 2.00m 7.2 682016000
Steel parts galvanised Scaffold tube 48.3mm 2.50m 9.0 682017000
Scaffold tube 48.3mm 3.00m 10.8 682018000
Delivery condition: folded closed
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000
Scaffold tube 48.3mm 5.00m 18.0 682023000
Scaffold tube 48.3mm 5.50m 19.8 682024000
Scaffold tube 48.3mm 6.00m 21.6 682025000
Scaffold tube 48.3mm .....m 3.6 682001000
Gerüstrohr 48,3mm
Galvanised
Waling-to-bracket holder 9-15cm 2.7 580625000 Wind bracing MF/150F/K 6.00m 4.7 580665000
Riegelhalter 9-15cm Windabspannung MF/150F/K 6,00m
Galvanised Galvanised
Scaffold tube connection 0.27 584375000 Universal tool box 15.0 9.1 580392000
Gerüstrohranschluss Universal-Werkzeugbox 15,0
Galvanised included in scope of supply:
Height: 7 cm (A) Reversible ratchet 1/2" 0.73 580580000
Galvanised
Length: 30 cm
(B) Fork wrench 13/17 0.08 580577000
Doka 4-part chain 3.20m 15.0 588620000 (C) Fork wrench 22/24 0.22 580587000
Doka-Vierstrangkette 3,20m (D) Fork wrench 30/32 0.80 580897000
Follow the directions in the "Operat- (E) Fork wrench 36/41 1.0 580586000
ing Instructions"! (F) Ring spanner 17/19 0.27 580590000
(G) Square nut 22 0.31 580589000
(H) Box spanner 41 0.99 580585000
(I) Extension 11cm 1/2" 0.20 580581000
(J) Extension 22cm 1/2" 0.31 580582000
(K) Universal joint coupling 0.16 580583000
(L) Box nut 19 1/2" L 0.16 580598000
(M) Box nut 13 1/2" 0.06 580576000
(N) Box nut 24 1/2" 0.12 580584000
(O) Box nut 30 1/2" 0.20 580575000
Lifting beam 110kN 6.00m 136.5 586359000 (P) Positioning cone spanner 15.0 DK 0.30 580579000
Umsetzbalken 110kN 6,00m Galvanised
Galvanised Length: 8 cm
Length: 626 cm Width-across: 30 mm
Follow the directions in the "Operat-
ing Instructions"!
Warning sign "No entry" 300x300mm 0.70 581575000 Doka Safety Systems
Verbotsschild "Zutritt Verboten" 300x300mm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Like Doka,
follow Doka.
Friends and followers
of Doka are always
up-to-date.
www.facebook.com/dokacom
397
Dam formwork
The formwork system for mass concrete structures
This dam formwork stands out for its high load-bearing capacity and operational safety. Two systems, each with a different load
capacity, enable it to be tailored to any mass concrete structure.
Good adaptability to the requirements of the structure: The working platforms of this dam formwork
¡¡ All Doka framed and timber-beam formwork systems, and ¡¡ provide high safety and let the crew work at high speed
also steel formwork, can be used ¡¡ can be quickly mounted and deployed as complete units
¡¡ Choice of two different design variants, for block heights of comprising both pouring platforms and finishing-work
up to 3.00 m or up to 4.00 m platforms
¡¡ In both versions, the formwork is tiltable, and on the D22 ¡¡ are generously dimensioned – 1.70 m in the D15 system
system it can also be rolled back and 2.40 m in the D22 system
Rapid working
right from the very first block
Cantilever bracket D15 K 136.4 580630000 Vertical waling D15 3.00m U120 87.6 580632000
Sperrenkonsole D15 K Vertical waling D15 3.50m U140 119.7 580638000
Painted blue Vertical waling D22 3.00m U160 115.5 580613000
Width: 166 cm Vertical waling D22 4.00m U160 154.5 580615000
Sperrenriegel D
Delivery condition: railing included
Painted blue
Swivel bearing plate D15 S 18.5 580635000 Starter block unit D22 80.0 580622000
Gelenkaufsatz D15 S Grundblockriegel D22
Painted blue Painted blue
Length: 36.8 cm Length: 147 cm
Height: 22.4 cm
Swivel plate MF 4.5 580672000 Scaffold tube 48.3mm 0.50m 1.7 682026000
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Safety first.
With this symbol...
...Doka is
‘making its mark’ Doka Climbing Systems
for safety.
www.doka.com/safety
405
Shaft platform
The climbing formwork for inside-shafts
The shaft platform plus shaft formwork are quick and easy to reposition, in just one crane cycle.
Reduced labour and crane times, as Handy, practical suspension-mounting on the structure, using
¡¡ the entire unit can be repositioned quickly and safely in one ¡¡ gravity pawl with no expendable anchoring components
piece ¡¡ main beam head
¡¡ the Framax stripping corner I makes it easy to set up and
strike the formwork, with no need for a crane
High adaptability
to any width of shaft
Telescopic shaft beam 1.45-1.65m 65.9 580686000 Tie rod wrench 15.0/20.0 1.9 580594000
Telescopic shaft beam 1.65-2.00m 74.3 580687000 Ankerstabschlüssel 15,0/20,0
Telescopic shaft beam 2.00-2.70m 107.5 580688000 Galvanised
Telescopic shaft beam 2.70-3.80m 156.5 580689000 Length: 37 cm
Telescopic shaft beam 3.80-5.90m 261.0 580690000
Teleskop-Schachtträger Diameter: 8 cm
Galvanised
Product Finder.
Visitors to doka.com
don’t so much
look for products as
find them.
www.doka.com/products
411
Doka Load-bearing Systems
The safe way to deal with high loads
Doka load-bearing systems are designed for flexibility, outstanding cost-efficiency and optimum
workplace safety, all of which make for fast and efficient forming operations. With its high-
capacity shoring systems for the building-construction and civil-engineering fields, highly
adaptable forming carriages for bridge-building, and cost-saving tunnel formwork, Doka has
the right solution for every requirement.
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 415
System
Staxo 100 frame
Diagonal crosses
416 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
Very high workplace safety
98003-269-01
¡¡ for easy adaptation to unusual layouts ¡¡ for safe towerframe assembly and safe working inside the
¡¡ continuous positioning possible up to 1.50 m away from the tower
tower ¡¡ lightweight aluminium decking units with or without a
¡¡ optimised equipment utilisation manhole opening
¡¡ only two decking units needed on each storey of the tower
¡¡ integrated anti-liftout guard makes it possible to fit the scaf-
fold planking units even when the towers are pre-assembled
in the horizontal
Doka Load-bearing Systems
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 417
Utilisation
Simple, fast stacking
418 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
Stair tower Erecting towers using a telescoping stacker
truck
By combining standard Staxo 100 frames and pre-assembled
aluminium stairway elements, this provides safe access to This is an effort-saving and safe method for erecting and
high-up workplaces. dismantling towers in the upright, and for repositioning them
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 419
References
420 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
In Zaporizhya, the industrial metropolis in Ukraine’s southeast,
a multi-lane cable-stayed bridge is under construction along-
side an older viaduct. The two separate roadway slabs are
cable-stayed off twin H-shaped suspension towers 150 metres
high.
Contractors: Mostobud
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 421
Article list
[kg] Article n° [kg] Article n°
Doka Load-bearing
Load-bearing tower Systems
Staxo 100
422 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Dokamatic table Staxo spindle connector 3.9 582347000 Heavy duty screw jack 130 13.0 582711000
Staxo-Spindelanschluss Dokamatic-Tisch Lastspindel 130
Galvanised Galvanised
Length: 20.7 cm Height: 173 cm
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 423
[kg] Article n° [kg] Article n°
Coupler Eurex 60 8.6 582652000 Plumbing strut shoe Eurex 60 EB 8.0 582660500
Kupplungsstück Eurex 60 Justierstützenfuß Eurex 60 EB
Aluminium Galvanised
Length: 100 cm Length: 31 cm
Diameter: 12.8 cm Width: 12 cm
Height: 33 cm
424 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Plumbing strut 540 IB EF 28.9 588250500 Scaffold planking 60/60cm 6.1 582330500
Justierstütze 540 IB EF Scaffold planking 60/100cm 9.5 582306500
Galvanised Scaffold planking 60/150cm 13.6 582307500
Length: 310.5 - 549.2 cm Scaffold planking 60/175cm 15.5 582332500
Scaffold planking 60/200cm 17.8 582308500
Scaffold planking 60/250cm 22.2 582309500
Scaffold planking 60/300cm 26.2 582310500
Gerüstbelag
Aluminium
Removable folding tripod 1.20m 20.7 586145000 Staxo 100 toeboard 5.5 582329000
Stützbein 1,20m Staxo 100-Fußwehr
Galvanised Galvanised
Height: 120 cm Length: 131 cm
Delivery condition: folded closed Height: 15 cm
Length: 140 cm
Doka-Coil 16mm
Height: 152 cm
Galvanised
Diameter: 1.6 cm
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 425
[kg] Article n° [kg] Article n°
Staxo side railing 100 17.5 582317500 Cone screw B 7cm 0.86 581444000
Staxo side railing 150 20.0 582318500 Konusschraube B 7cm
Staxo side railing 175 23.2 582331500 red
Staxo side railing 200 24.1 582319500 Length: 10 cm
Staxo side railing 250 27.5 582320500
Diameter: 7 cm
Staxo side railing 300 31.1 582321500
Staxo-Seitengeländer Width-across: 50 mm
Galvanised
Height: 152 cm Anchoring shoe for stair tower 3.4 582680000
Ankerschuh für Treppenturm
Galvanised
Length: 22 cm
Width: 12 cm
Height: 22 cm
426 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Staxo 100 mounting gallows 40kg 7.5 582328000 Bracing waling connector WS10 2.7 582756000
Staxo 100-Montagegalgen 40kg Abspann-Riegelverbinder WS10
Galvanised Galvanised
Height: 258 cm Length: 46.7 cm
Follow the directions in the "Operat-
ing Instructions"!
Connecting pin 10cm 0.34 580201000 Staxo/d2 adapter frame 14.1 582781000
Verbindungsbolzen 10cm Staxo/d2-Adapter
Galvanised Painted blue
Length: 14 cm Length: 37 cm
Width: 36 cm
Doka Load-bearing Systems
Height: 36 cm
Doka Load-bearing Systems | Shoring towers | Load-bearing tower Staxo 100 | 427
[kg] Article n° [kg] Article n°
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
428 | Load-bearing tower Staxo 100 | Shoring towers | Doka Load-bearing Systems
The Formwork Experts.
Broadcasting
ourselves.
You’ll find all the
videos about our
products and services
on the Doka YouTube
channel.
Doka Load-bearing Systems
www.youtube.com/doka
429
Load-bearing tower Staxo 40
The lightweight shoring system for the building construction field
The Load-bearing tower Staxo 40 system stands out for being exceptionally easy to handle, and superbly adaptable to any building-
construction project.
Fast Efficient
Time savings every step of the way Staxo 40 opens up a wide range of possibilities in building-
construction
¡¡ high-speed assembly, as there are only a few separate
components, all of them very light in weight ¡¡ screw-jack U-heads and feet with a 75 cm extension range
¡¡ ergonomically engineered H-frames – easier to carry, for easier height adjustment
quicker to set up ¡¡ shifting-wheels for relocating entire towers, to facilitate an
¡¡ the ability to travel and lift entire towers, instead of labour- efficient construction workflow
intensively dismantling them first ¡¡ safely sustains loads at slab-edges by means of brackets
¡¡ colour-coded diagonal crossbraces so that you can quickly ¡¡ ease of handling, logical assembly sequence and high-
tell which length is which speed working
Safe
Maximum safety, even on great shoring heights
Integral safety
for fast, safe working inside the scaffold and beneath the
towerframe superstructure
by mounting platform brackets to the towerframes by the high load capacity of the platform brackets combined
with a plumbing strut
Staxo 40 frame 0.90m 14.6 582202000 Diagonal brace d2 9.100 2.0 582740000
Staxo 40 frame 1.20m 17.5 582201000 Diagonal brace d2 9.125 2.2 582741000
Staxo 40 frame 1.80m 24.5 582200000 Diagonal brace d2 9.152 2.6 582742000
Staxo 40-Rahmen Diagonal brace d2 9.175 3.0 582743000
Galvanised Diagonal brace d2 9.200 3.3 582744000
Diagonal brace d2 9.225 5.9 582745000
Diagonal brace d2 9.250 6.8 582746000
Diagonal brace d2 12.100 2.2 582712000
Diagonal brace d2 12.125 2.5 582713000
Diagonal brace d2 12.152 2.9 582714000
Diagonal brace d2 12.175 3.1 582715000
Diagonal brace d2 12.200 3.5 582716000
Diagonal brace d2 12.225 6.0 582717000
Diagonal brace d2 12.250 6.7 582718000
Diagonal brace d2 18.100 3.0 582720000
Diagonal brace d2 18.125 3.3 582721000
Diagonal brace d2 18.152 5.8 582722000
Diagonal brace d2 18.175 6.1 582723000
Diagonal brace d2 18.200 6.4 582724000
Diagonal brace d2 18.225 6.9 582725000
Diagonal brace d2 18.250 7.4 582726000
Staxo 40 coupler 0.60 582203000 Diagonalstrebe d2
Staxo 40-Kupplungsstück Galvanised
Galvanised
Height: 30.8 cm
Staxo 40 screw jack U-head 70cm 7.0 582208000 Wedge for screw jack ..... % 0.46 176071000
Staxo 40-Kopfspindel 70cm Spindelkeil ..... %
Galvanised Length: 20 cm
Height: 105.5 cm Width: 16 cm
Plumbing strut Eurex 60 550 42.5 582658000 Plumbing strut 340 IB 16.7 588696000
Justierstütze Eurex 60 550 Justierstütze 340 IB
Powder-coated, blue Galvanised
Aluminium Length: 190.8 - 341.8 cm
Length: 343 - 553 cm
Strut shoe EB 0.93 588946000 Scaffold planking 60/100cm with manhole 9.5 582311500
Strebenschuh EB Scaffold planking 60/150cm with manhole 13.8 582312500
Galvanised Scaffold planking 60/175cm with manhole 15.5 582333500
Width: 8 cm Scaffold planking 60/200cm with manhole 17.7 582313500
Scaffold planking 60/250cm with manhole 20.8 582314500
Height: 13 cm
Scaffold planking 60/300cm with manhole 26.3 582315500
Gerüstbelag mit Durchstieg
Aluminium
Prop shoe EB 1.8 588245500
Stützenschuh EB
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Staxo 40 plumbing strut adapter 1.6 582214000 Scaffold planking 30/100cm 7.4 582231000
Staxo 40-Justierstützenadapter Scaffold planking 30/150cm 10.6 582232000
Galvanised Scaffold planking 30/200cm 13.5 582234000
Height: 16 cm Scaffold planking 30/250cm 16.4 582235000
Scaffold planking 30/300cm 19.5 582236000
Gerüstbelag
Galvanised
Doka coil 16mm 0.009 588633000 Staxo 40 planking strut 1.00m 5.7 582215000
Doka-Coil 16mm Staxo 40 planking strut 1.50m 7.3 582216000
Staxo 40 planking strut 2.00m 9.3 582217000
Galvanised Staxo 40-Belagstrebe
Diameter: 1.6 cm Galvanised
Staxo front railing 10.5 582316000 Swivel coupler 48mm 1.5 582560000
Staxo-Stirngeländer Drehkupplung 48mm
Galvanised Galvanised
Length: 140 cm Width-across: 22 mm
Height: 152 cm
Toeboard holder XP 1.20m 0.64 586461000 Universal plug R20/25 0.003 588180000
Fußwehrhalter XP 1,20m Kombi Ankerstopfen R20/25
Galvanised Blue
Height: 21 cm Diameter: 3 cm
ing Instructions"!
You will find working and protec-
tion platforms, guardrail systems
Retaining plate 15.0 1.8 586073000 and access systems in the section
Jochplatte 15,0 headed "Doka Safety Systems".
Galvanised
Length: 17 cm
Width: 12 cm
Height: 11 cm
¡¡ can be used to shore both pre-cast and CIP concrete ¡¡ less equipment and erection-work needed, as there are only
members a small number of different parts, all with a high load rating
¡¡ can be adapted to differing requirements, as the system can ¡¡ lower costs due to the use of rentable system components
be used for stand-alone struts, primary planes or heavy-duty ¡¡ time-savings from optimised workflows
shoring towers
¡¡ can transfer high loads of up to 430 kN, due to the high
load-bearing capacity of the Strut SL-1
¡¡ continuous height adjustment made possible by the strut
spacing grid and strut spindle
Doka Load-bearing Systems | Shoring towers | Heavy-duty supporting system DokaShore | 445
Article list
[kg] Article n° [kg] Article n°
Doka Load-bearing
Heavy-duty supporting
Systems
system DokaShore
Strut SL-1 2.50m 86.5 582812000 Basic plate screw-set SL-1 1.2 582852000
Strut SL-1 1.25m 60.5 582813000 Schraubensatz Grundplatte SL-1
Strut SL-1 0.625m 40.0 582814000 Galvanised
Strut SL-1 0.312m 27.0 582815000
Strut SL-1 0.156m 16.0 582817000
Stütze SL-1
Galvanised
Width: 37 cm
446 | Heavy-duty supporting system DokaShore | Shoring towers | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Distance piece SL-1 1.9 582809000 Multi-purpose waling WS10 Top50 0.50m 10.2 580001000
Distanzstück SL-1 Multi-purpose waling WS10 Top50 0.75m 14.9 580002000
Galvanised Multi-purpose waling WS10 Top50 1.00m 19.6 580003000
Length: 16 cm Multi-purpose waling WS10 Top50 1.25m 24.7 580004000
Multi-purpose waling WS10 Top50 1.50m 29.7 580005000
Width: 9.2 cm
Multi-purpose waling WS10 Top50 1.75m 35.0 580006000
Height: 8.2 cm Multi-purpose waling WS10 Top50 2.00m 38.9 580007000
Multi-purpose waling WS10 Top50 2.25m 44.2 580008000
Split nut SL-1 15.0 0.70 582835000 Multi-purpose waling WS10 Top50 2.50m 48.7 580009000
Spannmutter SL-1 15,0 Multi-purpose waling WS10 Top50 2.75m 54.2 580010000
Galvanised Multi-purpose waling WS10 Top50 3.00m 60.2 580011000
Length: 9-11 cm Multi-purpose waling WS10 Top50 3.50m 68.4 580012000
Multi-purpose waling WS10 Top50 4.00m 79.4 580013000
Width-across: 30/41 mm Multi-purpose waling WS10 Top50 4.50m 89.1 580014000
Multi-purpose waling WS10 Top50 5.00m 102.0 580015000
Multi-purpose waling WS10 Top50 5.50m 112.4 580016000
Hexagon nut 15.0 0.23 581964000 Multi-purpose waling WS10 Top50 6.00m 118.0 580017000
Sechskantmutter 15,0 Mehrzweckriegel WS10 Top50
Galvanised Painted blue
Length: 5 cm
Width-across: 30 mm
Swivel coupler 48mm 1.5 582560000 Spring cotter 5mm 0.05 580204000
Drehkupplung 48mm Federvorstecker 5mm
Galvanised Galvanised
Width-across: 22 mm Length: 13 cm
Doka Load-bearing Systems | Shoring towers | Heavy-duty supporting system DokaShore | 447
[kg] Article n° [kg] Article n°
Spindle strut T6 73/110cm 10.2 584355000 Panel strut 340 IB 24.3 580365000
Spindle strut T6 100/150cm 12.5 584323000 Elementstütze 340 IB
Spindelstrebe T6 consisting of:
Galvanised (A) Plumbing strut 340 IB 16.7 588696000
Galvanised
Length: 190.8 - 341.8 cm
(B) Adjusting strut 120 IB 7.6 588248500
Galvanised
Length: 81.5 - 130.6 cm
Galvanised
Delivery condition: folded closed
448 | Heavy-duty supporting system DokaShore | Shoring towers | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Q
J
M
S
L
R
N
H M
P
I
K
L O
Doka Load-bearing Systems | Shoring towers | Heavy-duty supporting system DokaShore | 449
Heavy-duty supporting system SL-1
The heavy-duty ‘construction kit’ for tunnel-building
The modularly designed Doka heavy-duty supporting system SL-1 provides complete formwork solutions for widely differing tunnel
cross-sections, regardless of shape and load.
¡¡ minimises investment costs because many of the system ¡¡ safe work locations assured by integrated working platforms
components are rentable and ladderways
¡¡ the system beams, walings and struts can be arranged in ¡¡ detailed assembly and utilisation planning makes for
variable configurations, enabling optimum use to be made of executional reliability
each item of equipment ¡¡ safe travelling even on steep longitudinal and transverse
¡¡ flexible in terms of construction workflow, as it is compatible gradients
with Large-area formwork Top 50 ¡¡ reliability assured by tried-and-tested, pre-dimensioned
¡¡ is exactly planned by Doka Formwork Experts to ensure system design
streamlined forming ¡¡ safe placing of reinforcement steel, from the Working
scaffold Modul
CE marking
Edge protection system XP
Ladder system XS
Working scaffold Modul
During renovation of
the Wolfsberg Tunnel
on Austria’s A10 Tauern
autobahn, extremely short
repositioning times were
achieved in the 421 m
long underground section
by using an all-hydraulic
formwork traveller.
The modular, versatile
SL-1 system met the
requirements of this site in
every respect.
CE marking
Edge protection system XP
Ladder system XS
The longitudinal trusses can be variably positioned, which makes it easy to adapt the cantilever forming traveller to variable-width
or multi-cell cross-sections.
¡¡ permanent self-locking safety feature using slide bearings ¡¡ makes it easier and quicker to place reinforcement steel and
to guard against unwanted travelling, effective up to a concrete, by permitting unobstructed access from above
longitudinal gradient of six percent
¡¡ incorrect operation of this safety feature is impossible, as it
is always active
Doka Load-bearing Systems
On this dual-carriageway
bridge in Nitra, the triple-
cell box cross-section,
with slanted-webs, was
constructed using three
pairs of Doka cantilever
forming travellers, each with
four longitudinal trusses. A
newly developed undertruss
reduces the deflection of the
approx. 30 m wide bottom
grid to a minimum during
travelling. The high standard
of – CE-certified – safety
was a further decision-
swaying factor for working
with Doka once again.
¡¡ small number of versatile, combinable component parts ¡¡ high-calibre solutions for all steel composite bridges,
¡¡ ease of assembly planned and supplied by a one-stop supplier
¡¡ fast closing and opening of formwork ¡¡ operationally reliable, as the forming carriages, shoring
¡¡ high safety standards for rapid working towers and working platforms are all designed to work
together seamlessly
¡¡ for forward-jacking the inside formwork using the ‘roller- ¡¡ cantilever arm formwork can be adjusted in all directions by
drawer principle’ means of spindle struts
¡¡ formwork is easy to close and open, using a two-part
anchoring system
Efficient, fast construction progress, in a daily rhythm For on-time, on-budget project implementation, thanks to
¡¡ on longer bridge superstructures ¡¡ the high degree of pre-assembly of the long-lived,
¡¡ for higher numbers of repeat uses galvanised load-bearing construction
¡¡ for ‘section-at-a-time’ repositioning cycles ¡¡ the fast erection and dismantling times
¡¡ on bridge superstructures where it is not possible to ¡¡ short repositioning times
suspend formwork from under the cantilever slab ¡¡ the small amount of storage space needed
¡¡ for rehabilitating existing bridge superstructures
¡¡ on bridges with wide radii
Multi-functional
One system, several utilisations
The Forming wagon T’s high degree of pre-assembly simplifies Edge protection system XP
the site logistics and reduces the rental costs.
Bogie for forming wagon TS 936.0 584336000 Spindle strut T7 150/200cm 21.6 584324000
Grundgestell Schalwagen TS Spindelstrebe T7 150/200cm
consisting of: Galvanised
(A) Horizontal frame for forming wagon T 505.0 584337000
(B) Vertical frame for forming wagon T 177.0 584338000
(C) Frame strut for forming wagon T 13.5 584339000
2 pcs.
(D) Spindle strut GS T6 95/140cm 10.3 584340000
2 pcs.
Galvanised
(E) Flanged wheel T 51.0 584341000
4 pcs.
Galvanised
Length: 330 cm
Width: 229 cm
Height: 214 cm
Delivery condition: folded closed
Suspension beam for forming wagon T 175.0 584346000 Platform extension plate T 24.0 584362000
Hängeträger Schalwagen T Bühnenverbreiterung T
Galvanised Galvanised
Height: 352 cm Width: 95 cm
Height: 36 cm
Delivery condition: cable coiled
Railing strut for forming wagon T 18.0 584348000 Slinging plate T 8.3 584368000
Geländerstreben Schalwagen T Anhängelasche T
Galvanised Galvanised
Height: 300 cm Length: 28 cm
Delivery condition: folded closed Width: 14 cm
Height: 8 cm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
Top projects –
worldwide.
Use Google Maps to
navigate your way
around the globe to
Doka’s top projects.
Doka Load-bearing Systems
www.doka.com/topprojects
473
Forming wagon TU
The underslung bridge edge beam formwork for fast forming of cantilevered
parapets
With the innovative Forming wagon TU, cantilevered parapets can be cost-efficiently cast without disrupting traffic or other
construction operations.
Streamlined forming operations aided by Site crew are given maximum protection, by
¡¡ rentable all-in-one system with pre-assembled working ¡¡ high standards of both active and passive safety
platforms and parallel girderframe units / forming elements ¡¡ pre-mounted working platforms ready for immediate use
¡¡ easy rebar and concrete placement operations from above ¡¡ all-round scaffolding tubes for rugged side protection
¡¡ underslung constructional design ¡¡ a built-in gravity brake which prevents any unwanted
¡¡ minimal disruption to traffic (e.g. during bridge rehabilitation) travelling of the forming wagon
or to other construction operations when casting
cantilevered parapets
15° 15°
10°
Very great horizontal and vertical flexibility is what sets the GS mark (stands for ‘tested safety’)
easy-to-handle Bridge edge beam formwork T apart. Type-tested formwork system
Edge protection system XP
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T | 481
References
482 | Bridge edge beam formwork T | Bridge formwork | Doka Load-bearing Systems
During rehabilitation work on
this bridge across the River
Salzach, the quick-attach-
ment feature of Bridge edge
beam formwork T made
it possible to scaffold the
whole superstructure quickly
and safely.
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T | 483
Article list
[kg] Article n° [kg] Article n°
Doka Load-bearing
Bridge edge beam formwork
Systems T
Bridge edge beam bracket T 0.80m 22.0 584330000 Scaffold tube 48.3mm 0.50m 1.7 682026000
Gesimskonsole T 0,80m Scaffold tube 48.3mm 1.00m 3.6 682014000
Galvanised Scaffold tube 48.3mm 1.50m 5.4 682015000
Length: 99 cm Scaffold tube 48.3mm 2.00m 7.2 682016000
Scaffold tube 48.3mm 2.50m 9.0 682017000
Height: 80 cm
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000
Scaffold tube 48.3mm 5.00m 18.0 682023000
Scaffold tube 48.3mm 5.50m 19.8 682024000
Bridge edge beam support T 1.40m 13.3 584331000 Scaffold tube 48.3mm 6.00m 21.6 682025000
Gesimsträger T 1,40m Scaffold tube 48.3mm .....m 3.6 682001000
Galvanised Gerüstrohr 48,3mm
Galvanised
Delivery condition: folded closed
484 | Bridge edge beam formwork T | Bridge formwork | Doka Load-bearing Systems
[kg] Article n° [kg] Article n°
Handrail post T 1.80m 17.7 584373000 Hole plug 29mm 0.003 581891000
Einschubgeländer T 1,80m Gesimsankerstopfen 29mm
Galvanised Grey
Diameter: 3 cm
Doka Load-bearing Systems | Bridge formwork | Bridge edge beam formwork T | 485
Bridge formwork ParaTop
The ground-support-free cantilever arm formwork for steel-composite and pre-cast
concrete bridges
Doka bridge formwork ParaTop turns Large-area formwork Top 50 into a cantilever arm formwork that can be operated completely
from above. The system’s innovative insert-shoe makes it easy to erect, and compensates for any installation inaccuracy.
¡¡ can be fixed to either concrete or steel superstructures ¡¡ the assembly sequence is easy to understand, with only
(2 separate types of insert-shoe) three ParaTop system components (insert-shoe, insert-
¡¡ can easily be adapted to different cross-sections of canti channel, insert-cone)
lever slab with components from the modular Top 50 ‘kit’ ¡¡ erection and dismantling times are shortened by using
¡¡ does not collide with stiffening plates and is independent of bolted instead of threaded joints
head-bolt centres, as any bracket spacing can be selected ¡¡ ‘mount-ahead’ facility for insert-shoes
within the permitted influence width ¡¡ hanging the cantilever arm formwork into place does not
take much crane-time – there is no need to laboriously
thread in tie-rods, as the insert-shoes are open at the front
¡¡ safe assembly, as the lift-in-one units can be assembled in ¡¡ highly economical, because a single platform concept can
the horizontal be used on all Doka wall systems
¡¡ hazard-free access to the work deck made possible by ¡¡ can also be retro-fitted to upright formwork with a lifting
integrable telescoping ladders and integrated, self-closing adapter
manhole lids ¡¡ lower commissioning quantities cut storage and freight costs
¡¡ the all-round front/rear and side railings provide safe work-
ing conditions on the formwork
¡¡ no need for improvisations, as the system adapts to the
formwork with safe solutions for platform extensions and
corner transitions
Fast workflows
aided by practice-focused system attributes
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus | 491
System
Platform lengths from 1.00 m to 2.70 m
492 | Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
Side railing Railings facing formwork
The integrable side railing provides safe working conditions and Thanks to the ‘mounted-ahead’ Xsafe plus counter railing,
is designed for use on either the left- or right-hand side of the fall-hazard protection is already in place before anyone steps
platform. To safeguard closure gaps between two platforms, onto the platform. The side protection is thus complete on all
the system can be telescoped in 5 cm increments up to max. four sides.
50 cm, and moved backwards to allow unobstructed access
around the platform.
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus | 493
Utilisation
Connecting to framed formwork
The Xsafe plus waling connector allows the platform waling Safety is particularly important when columns have to be
or multipurpose waling to be connected to the timber-beam formed at slab-edges. The Xsafe plus column adapter allows
formwork. the platforms to be used on column formwork as well. Safe
ladderways and fully walkable platforms are solved within the
system.
494 | Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
Use as a pouring platform
The Xsafe plus lifting waler makes it possible to lift the Where space is tight, the Xsafe plus swivel plate enables
formwork into the upright after it has been assembled in the large formwork units to be delivered to the site complete with
horizontal, and to reposition large formwork units together with the platform system. This means that less assembly work is
the platform system. The lifting waler is CE-marked and is needed on the site.
supplied with Operating Instructions.
Doka Safety Systems
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus | 495
References
At this shopping centre near
Ansbach in Southern Ger-
many, CIPC wall segments
in heights of up to 8.20 m
were cast in alternate
sequential sections. Heavy-
duty Framax Xlife extra-large
panels were used as the
formwork. The Platform
system Xsafe plus also met
all this site’s requirements
for modern-day workplace
safety, greatly speeding up
the progress of work.
496 | Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
The contractors poured the
3850 m² total wall area
of these gravel storage
bunkers in a record time of
four weeks. Having been
pre-assembled flat on the
ground, the gang-forms –
consisting of the formwork,
two Xsafe plus platform
levels, ladderways and panel
struts – were repositioned
in a single crane cycle,
resulting in very great time-
savings.
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus | 497
Article list
[kg] Article n° [kg] Article n°
Doka Safety
Platform system
Systems
Xsafe plus
Xsafe plus platform 2.70m with side railing 189.0 586401000 Xsafe plus platform 2.00m 122.5 586407000
Xsafe plus-Bühne 2,70m mit Seitengeländer Xsafe plus-Bühne 2,00m
Steel parts galvanised Steel parts galvanised
Timber parts varnished yellow Timber parts varnished yellow
Height: 136 cm Height: 136 cm
Delivery condition: folded closed Delivery condition: folded closed
Xsafe plus platform 2.40m 142.7 586406000 Xsafe plus platform extension 0.60m 43.4 586418000
Xsafe plus-Bühne 2,40m Xsafe plus-Bühnenverlängerung 0,60m
Steel parts galvanised Galvanised
Timber parts varnished yellow Height: 120 cm
Height: 136 cm Delivery condition: railing included
Delivery condition: folded closed
498 | Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
[kg] Article n° [kg] Article n°
Xsafe plus platform transition 26.5 586419000 Xsafe plus stacking waler extension 1.80m 42.4 586414000
Xsafe plus-Bühnenübergang Xsafe plus-Bühnenriegelverlängerung 1,80m
Galvanised Painted blue
Length: 85 cm Length: 201 cm
Width: 48 cm
Doka Safety Systems | Working and Protection Platforms | Platform system Xsafe plus | 499
[kg] Article n° [kg] Article n°
Xsafe plus lifting waler 14.0 586417000 Xsafe plus ladder starter piece 6.8 586424000
Xsafe plus-Umsetzriegel Xsafe plus-Leiternhalter
Galvanised Galvanised
Height: 87 cm Length: 95 cm
Xsafe plus lifting adapter Framax 6.6 586436000 Xsafe plus swivel plate 2.3 586431000
Xsafe plus-Umsetzadapter Framax Xsafe plus-Schwenklasche
Galvanised Galvanised
Height: 51.4 cm Height: 33 cm
500 | Platform system Xsafe plus | Working and Protection Platforms | Doka Safety Systems
The Formwork Experts.
Service Finder.
Visitors to doka.com
don’t so much
look for services as
find them.
www.doka.com/services
501
Folding platform K
The pre-assembled scaffold platform for concrete construction sites
Doka folding platforms K are pre-assembled, work-ready scaffold platforms with standardised system components for all usage
situations.
Put the advantages of this EN 12811-1 and DIN 4420 certified Depending on your needs, you can use the pre-assembled
Service and Working Scaffold to work for you scaffold platforms as
¡¡ reduced costs, due to fast, safe working ¡¡ working platforms
¡¡ high load-bearing capacity (max. 600 kg/m²) means that ¡¡ protection platforms
wall formworks up to 5.50 m high can be stood on the ¡¡ sloping-rooftop fall barriers
platforms ¡¡ protective canopies
¡¡ unobstructed, flat platform deck made possible by the
retractable crane-hoisting points
¡¡ with practical add-on components for every usage situation
Highly cost-efficient
saving you time and money
Doka Safety Systems | Working and Protection Platforms | Folding platform K | 503
System
¡¡ system consists of two straight platforms (3.00 m and
4.50 m long) and a corner solution
¡¡ two different suspension methods and a wide range of
accessories for adapting to site requirements
¡¡ high load-bearing capacity of up to 600 kg/m² (= Scaffold
Category 6)
¡¡ platform level can be raised / lowered by either 0.50 m or
1.00 m at a time
¡¡ long service life thanks to its sturdy design, varnished floor
planking and galvanised steel construction
¡¡ planking protected by steel section on the narrowside
504 | Folding platform K | Working and Protection Platforms | Doka Safety Systems
Types of suspension point
Logistics
Doka Safety Systems | Working and Protection Platforms | Folding platform K | 505
References
506 | Folding platform K | Working and Protection Platforms | Doka Safety Systems
Rentable extension components permit cost-saving, efficient
utilisations.
New campus building for the ‘FH Graz’ college of higher technical education in Graz,
Austria
Contractors: Strobl Bau
Doka Safety Systems
Doka Safety Systems | Working and Protection Platforms | Folding platform K | 507
Article list
[kg] Article n° [kg] Article n°
Doka Safety
Folding platform
Systems
K
Doka folding platform K 3.00m 291.5 580442000 Suspended platform 120 3.30m 44.0 580411000
Doka folding platform K 4.50m 444.5 580443000 Suspended platform 120 4.30m 52.6 580412000
Doka-Faltbühne K Hängebühne 120
Timber parts varnished yellow Galvanised
Steel parts galvanised Delivery condition: folded closed
Delivery condition: folded closed
Doka folding platform K outside corner 460.0 580424000 Strut 32.9 580416000
Doka-Faltbühne K Außenecke Stützstab
Timber parts varnished yellow Galvanised
Steel parts galvanised Length: 370 cm
Delivery condition: folded closed
508 | Folding platform K | Working and Protection Platforms | Doka Safety Systems
[kg] Article n° [kg] Article n°
Scaffold tube 48.3mm 0.50m 1.7 682026000 Universal railing shackle 3.0 580478000
Scaffold tube 48.3mm 1.00m 3.6 682014000 Universal-Geländerbügel
Scaffold tube 48.3mm 1.50m 5.4 682015000 Galvanised
Scaffold tube 48.3mm 2.00m 7.2 682016000 Height: 20 cm
Scaffold tube 48.3mm 2.50m 9.0 682017000
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000 Doka 4-part chain 3.20m 15.0 588620000
Scaffold tube 48.3mm 5.00m 18.0 682023000 Doka-Vierstrangkette 3,20m
Scaffold tube 48.3mm 5.50m 19.8 682024000 Follow the directions in the "Operat-
Scaffold tube 48.3mm 6.00m 21.6 682025000 ing Instructions"!
Scaffold tube 48.3mm .....m 3.6 682001000
Gerüstrohr 48,3mm
Galvanised
Doka Safety Systems | Working and Protection Platforms | Folding platform K | 509
[kg] Article n° [kg] Article n°
Scaffold tube connection 0.27 584375000 Universal tool box 15.0 9.1 580392000
Gerüstrohranschluss Universal-Werkzeugbox 15,0
Galvanised included in scope of supply:
Height: 7 cm (A) Reversible ratchet 1/2" 0.73 580580000
Galvanised
Length: 30 cm
(B) Fork wrench 13/17 0.08 580577000
Doka 4-part chain 3.20m 15.0 588620000 (C) Fork wrench 22/24 0.22 580587000
Doka-Vierstrangkette 3,20m (D) Fork wrench 30/32 0.80 580897000
Follow the directions in the "Operat- (E) Fork wrench 36/41 1.0 580586000
ing Instructions"! (F) Ring spanner 17/19 0.27 580590000
(G) Square nut 22 0.31 580589000
(H) Box spanner 41 0.99 580585000
(I) Extension 11cm 1/2" 0.20 580581000
(J) Extension 22cm 1/2" 0.31 580582000
(K) Universal joint coupling 0.16 580583000
(L) Box nut 19 1/2" L 0.16 580598000
(M) Box nut 13 1/2" 0.06 580576000
(N) Box nut 24 1/2" 0.12 580584000
(O) Box nut 30 1/2" 0.20 580575000
Lifting beam 110kN 6.00m 136.5 586359000 (P) Positioning cone spanner 15.0 DK 0.30 580579000
Umsetzbalken 110kN 6,00m Galvanised
Galvanised Length: 8 cm
Length: 626 cm Width-across: 30 mm
Follow the directions in the "Operat-
ing Instructions"!
Warning sign "No entry" 300x300mm 0.70 581575000 Doka Safety Systems
Verbotsschild "Zutritt Verboten" 300x300mm
You will find working and protec-
tion platforms, guardrail systems
and access systems in the section
headed "Doka Safety Systems".
510 | Folding platform K | Working and Protection Platforms | Doka Safety Systems
The Formwork Experts.
Good news.
In the Newsroom,
Doka keeps you in-
formed about what’s
new in the world of
formwork technology.
Doka Safety Systems
www.doka.com/news
511
Bracket platform M
The lightweight, site-ready working platform, protection platform and sloping-roof-
top fall barrier
The Bracket platform M is a site-ready, lightweight working and protection platform that gives a big boost to safety in the field of
masonry and pre-cast construction. The winner of an EU award, the Bracket platform M complies with both EN 12811-1 (for use as
a working platform), and DIN 4420 (for use as a protection platform).
Put the advantages of this EN 12811-1 certified Service and Depending on your needs, you can use these site-ready,
Working Scaffold to work for you lightweight platforms as
¡¡ high load-bearing capacity (max. 300 kg/m²) yet low dead ¡¡ working platforms
weight ¡¡ protection platforms
¡¡ safe platform workdeck, as the crane-hoisting points can be ¡¡ or as sloping-rooftop fall barriers
lowered out of the way
¡¡ safe corner transitions, thanks to Corner platform decking M
¡¡ winner of Safety Award from the European Agency for Safety
and Health at Work Outstanding cost-efficiency
on your project
Achieves cost-optimisation by
Fast, safe working ¡¡ having a long lifespan
thanks to easy handling ¡¡ not taking up much storage and transport space (over
200 lin.m of platforms fit in one truck trailer)
Reduced labour and crane times, thanks to
¡¡ pre-assembled units built from a small number of rugged
system components
¡¡ ready for use straight away, after a very few quick and easy
actions
¡¡ quick-connection feature for joining the bracket to the
decking
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 513
System
The Bracket platform M in detail
Suspension points
514 | Bracket platform M | Working and Protection Platforms | Doka Safety Systems
Corner platform Corner transition M
decking M 1.80m
Suspension Bridging
methods openings
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 515
Utilisation
Easy to handle
The Bracket platform M cuts costs by being ready for operation in only a few simple steps: Tilt up the railings – fix the bracket –
hang the platform into place – that’s it.
Areas of use
Used as a working platform, DIN 4420 and ÖNORM Combined with safety The Bracket platform M has
e.g. on walls, the Bracket B 4007 compliant protection nets (mesh aperture max. a second drop-in rod on
platform M makes for platform. The Doka bracket 100 mm) and Universal each bracket which enables
safe working thanks to its platform M puts an end to handrail lengthening it to be placed 1.00 m
spacious width and close- the time-consuming and pieces M, the Bracket higher, e.g. to comply with
meshed lattice railings. risky business of improvising platform M can be used as a regulations regarding the
protection platforms from dependable sloping-rooftop maximum drop distance to
separate brackets and fall barrier. protection platforms.
planks.
516 | Bracket platform M | Working and Protection Platforms | Doka Safety Systems
Platform transport fork K/M
Logistics
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 517
References
518 | Bracket platform M | Working and Protection Platforms | Doka Safety Systems
The ‘Hotel H2O’ has a massive 9110 m² footprint. For its
thermal spa resort alone, 15,000 m³ of concrete and 750 m³
of timber were used, and 1.2 million man-hours worked. The
result is a unique hotel and spa resort with a high architectural
level.
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 519
Article list
[kg] Article n° [kg] Article n°
Doka Safety
Bracket platform
Systems
M
520 | Bracket platform M | Working and Protection Platforms | Doka Safety Systems
[kg] Article n° [kg] Article n°
Side handrail clamping unit T 29.1 580488000 Tie rod wrench 15.0/20.0 1.9 580594000
Seitenschutzgeländer T Ankerstabschlüssel 15,0/20,0
Galvanised Galvanised
Length: 115 - 175 cm Length: 37 cm
Height: 112 cm Diameter: 8 cm
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 521
[kg] Article n° [kg] Article n°
Plumbing strut 340 IB 16.7 588696000 Scaffold tube 48.3mm 0.50m 1.7 682026000
Justierstütze 340 IB Scaffold tube 48.3mm 1.00m 3.6 682014000
Galvanised Scaffold tube 48.3mm 1.50m 5.4 682015000
Length: 190.8 - 341.8 cm Scaffold tube 48.3mm 2.00m 7.2 682016000
Scaffold tube 48.3mm 2.50m 9.0 682017000
Scaffold tube 48.3mm 3.00m 10.8 682018000
Scaffold tube 48.3mm 3.50m 12.6 682019000
Scaffold tube 48.3mm 4.00m 14.4 682021000
Scaffold tube 48.3mm 4.50m 16.2 682022000
Scaffold tube 48.3mm 5.00m 18.0 682023000
Scaffold tube 48.3mm 5.50m 19.8 682024000
Scaffold tube 48.3mm 6.00m 21.6 682025000
Scaffold tube 48.3mm .....m 3.6 682001000
Gerüstrohr 48,3mm
Galvanised
522 | Bracket platform M | Working and Protection Platforms | Doka Safety Systems
[kg] Article n° [kg] Article n°
Doka Safety Systems | Working and Protection Platforms | Bracket platform M | 523
Edge protection system XP
The fall-arrest system for formwork and structure shell
This system is the universal safety solution for all edge protection needs. It fits in ideally with Doka systems – be they wall or floor-
slab formwork – for safeguarding slab-edges or as fall-arrest barriers on the structure shell.
The Handrail post XP 1.20m features ‘use-anywhere’ versatility, covering all types of edge protection. Either protective gratings,
wooden planks, scaffold tubes or gap-free boarding can be used as the safety barriers.
Easy-Click function
Tested safety
Protective grating XP
The design of the system makes for very simple and space-
saving warehouse and site logistics. The system is compact to
transport and easy to handle.
Connector components
The system is rounded off by practical connectors to meet the requirements of any situation – concrete floor-slabs, stairways,
bridge superstructures, wall and floor-slab formwork or platforms.
Doka Safety Systems
¡¡ all spacings and lengths of grating are sized to fit Doka formwork systems, and are statically optimised
¡¡ after every forming cycle, the component geometry may mean that different requirements need to be met: XP is easy to adapt
¡¡ fluid transition from flexible deployment on the formwork to long-term use on the structure shell
Handrail post XP 0.60m 5.0 586462000 Attachable sleeve 24mm 0.03 584385000
Geländersteher XP 0,60m Steckhülse 24mm
Galvanised Grey
Height: 68 cm Length: 16.5 cm
Diameter: 2.7 cm
App-solutely
innovative.
Experience
pathbreaking
solutions on your
smartphone or tablet,
with the Doka apps.
Doka Safety Systems
www.doka.com/apps
537
Handrail posts & clamps
Safety on every structure
These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow.
When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your
success.
Put the versatility of the Doka handrail posts & clamps to work Doka handrail posts & clamps are quick and easy to mount
for you: ¡¡ by quick-fixing with a wedge
¡¡ Handrail clamp S ¡¡ as the only tool needed is a hammer
¡¡ Handrail clamp T
¡¡ Handrail post 1.10m
Uninterrupted safety
in every phase of the work
Handrail clamp T
The Handrail post 1.10m is a fast and very safe way of putting
up safety railings. Handrail posts 1.10m can be deployed along
slab-edges, floor openings or other fall-hazard locations, or for
opposing guard-rails on wall formwork. The hot-dip galvanised
all-steel construction of the Handrail post 1.10m gives it a very
long lifespan.
Residential,
highrise, bridges,
tunnels, power
stations, ...
Discover the diversity
of Doka’s top
worldwide projects
with Google Maps. Doka Safety Systems
www.doka.com/topprojects
543
Protection screen Xclimb 60
The variable enclosure for all high-rise projects
The Protection screen Xclimb 60 lets you carry out construction work in the top building-levels of high-rise projects in great safety,
and protected from the weather. Protection screen Xclimb 60 is a hydraulically climbed system that can also be quickly repositioned
by crane if sufficient craneage is available. Because it is structure-guided at all times, it can be operated even in windy conditions.
The system comes in several versions, giving you the ideal solution for every requirement.
¡¡ gapless enclosure protects your site-crew from fall hazards, ¡¡ higher productivity, from an enhanced feeling of safety
wind and weather ¡¡ greater independence in the construction sequence, as
¡¡ safe repositioning, even in windy conditions, as the system climbing operations can also take place when the formwork
is structure-guided at all times is still in place beneath the slabs
¡¡ protection against items being dropped is ensured by hori- ¡¡ certainty regarding costs, when the protection screen is
zontal and vertical sealing – even during the lifting operation pre-assembled by Doka
¡¡ mobile hydraulic system saves on craneage
Multi-functional
suitable for all shapes and heights of structure
CE marking
Table Lifting System TLS
Automatic climbing formwork Xclimb 60
Guided climbing formwork Xclimb 60
Edge protection system XP
Doka Safety Systems
Design variant with polycarbonate inlay Design variant with mesh inlay
¡¡ translucent ¡¡ translucent
¡¡ wind-impermeable ¡¡ wind-permeable
¡¡ non-see-through
All-round safety
Design variant with trapezoidal metal Design variant with perforated trapezoidal
sheet sheet
¡¡ wind-impermeable ¡¡ translucent
¡¡ non-see-through ¡¡ wind-permeable
High cost-efficiency
for your site
Staxo 100 frame 1.20m 28.0 582301000 Universal dismantling tool 3.7 582768000
Staxo 100-Rahmen 1,20m Universal-Lösewerkzeug
Galvanised Galvanised
Length: 75.5 cm
Landing railing 250 6.3 582673000 Scaffold planking 60/60cm 6.1 582330500
Podestgeländer 250 Scaffold planking 60/100cm 9.5 582306500
Galvanised Scaffold planking 60/150cm 13.6 582307500
Length: 160 cm Scaffold planking 60/175cm 15.5 582332500
Scaffold planking 60/200cm 17.8 582308500
Height: 48 cm
Scaffold planking 60/250cm 22.2 582309500
Scaffold planking 60/300cm 26.2 582310500
Gerüstbelag
Aluminium
The ladder system and cage ensure safe, fast working One single system for all up/down access routes to work-
¡¡ complete safety when climbing up to, or down from, working platforms; compatible with
platforms ¡¡ all Doka wall formwork, including circular formwork and
¡¡ complies with all statutory regulations Doka supporting construction frames
¡¡ proven Doka quality, with hot-dip galvanised ladders and ¡¡ all Doka column formwork systems
ladder cages ¡¡ all Doka climbing formwork systems, Doka tunnel formwork
and the Doka cantilever forming traveller
¡¡ controlled erection workflow due to the pre-defined ¡¡ can be used as bracing scaffolding, stair tower or scaffold
connection-points on the ‘Modul’ hole-plate access
¡¡ boltless jointing technique using the wedge-locking principle ¡¡ vertically adaptable in a 50 cm height grid
¡¡ rigid, force-transmitting joints with just one blow of the ¡¡ adaptable in terms of layout, by means of ‘Modul’ hole-
hammer plates that each permit eight different connecting directions
¡¡ the system is self-explanatory, which keeps familiarisation in one plane
times short ¡¡ has Intermixing Approval permitting combinations with other
¡¡ units can be crane-lifted for faster cycling manufacturers’ scaffolds
¡¡ standards, ledgers, diagonals and decking boards can be
systematically selected to make possible various different
scaffold heights, bay lengths and bay widths
All-round safety
thanks to integral safety details
The ‘Modul’ base collar even allows the basic frame to be set
up by just one person. Once the basic construction has been
set up and aligned in the horizontal, the ‘Modul’ standards can
be fixed on in the desired total length.
Wedge-locking principle
Even when the wedge is only loosely inserted, the scaffold node is positively locked. By hammering on the wedge until the hammer
rebounds, a rigid, force-transmitting joint is then created.
as the planking units have a manhole and an integral ladder Travel rollers can be used for easy wheeling of the scaffold to
its next usage location.
The modular system means that stair towers can be configured with the stairway units either in the same or opposite directions.
Stair towers assembled from the ‘Modul’ system conform to Class A of EN 12811-1.
Doka Safety Systems
568
Counter railing col. formwork plat. 150/90cm 229, 237, Doka beam H16 P 3.30m . . . . . . . . . . . . . . . . . . . . .65 Doka floor prop Eurex 20 top 250 . 80, 282, 292, 318,
246 Doka beam H16 P 3.90m . . . . . . . . . . . . . . . . . . . . .65 328, 338, 348
Counter railing platform planking KS . . . . . . . . . . . 230 Doka beam H16 P 4.90m . . . . . . . . . . . . . . . . . . . . .65 Doka floor prop Eurex 20 top 300 . 80, 282, 292, 318,
Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554 Doka beam H16 P 9.00m . . . . . . . . . . . . . . . . . . . . .65 328, 338, 348
Coupler Eurex 60 80, 86, 125, 171, 179, 200, 218, 237, Doka beam H16 P .....m . . . . . . . . . . . . . . . . . . . . . .65 Doka floor prop Eurex 20 top 350 . 80, 282, 292, 318,
245, 257, 424, 440 Doka beam H20 eco N 12.00m . . . . . . . . . . . . . . . . .64 328, 338, 348
Cover hinge SK 35cm . . . . . . . . . . . . . . . . . . . . . . 561 Doka beam H20 eco N 1.25m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 20 top 400 . 80, 282, 292, 318,
Crane sling 3.50m . . . . . . . . . . . . . . . . . . . . . 267, 390 Doka beam H20 eco N 1.80m . . . . . . . . . . . . . . . . . .64 328, 338, 348
Doka beam H20 eco N 2.45m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 20 top 550 . 80, 282, 292, 318,
D Doka beam H20 eco N 2.65m . . . . . . . . . . . . . . . . . .64 328, 338, 348
DekDrive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Doka beam H20 eco N 2.90m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 20 top 700 . . . . . . . . . . 80, 328
DekLift 4.50m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Doka beam H20 eco N 3.30m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 250 . 80, 282, 292, 318,
Diagonal brace d2 12.100 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N 3.60m . . . . . . . . . . . . . . . . . .64 328, 338, 348
Diagonal brace d2 12.125 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N 3.90m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 300 . 80, 282, 292, 318,
Diagonal brace d2 12.152 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N 4.50m . . . . . . . . . . . . . . . . . .64 328, 338, 348
Diagonal brace d2 12.175 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N 4.90m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 350 . 80, 282, 292, 318,
Diagonal brace d2 12.200 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N 5.90m . . . . . . . . . . . . . . . . . .64 328, 338, 348
Diagonal brace d2 12.225 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N .....m . . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 400 . 80, 282, 292, 318,
Diagonal brace d2 12.250 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco N .....m BS . . . . . . . . . . . . . . . .64 328, 338, 348
Diagonal brace d2 18.100 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 12.00m . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 450 . 80, 282, 292, 318,
Diagonal brace d2 18.125 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 1.10m . . . . . . . . . . . . . . . . .321 328, 338, 348
Diagonal brace d2 18.152 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 1.25m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 30 top 550 . 80, 282, 292, 318,
Diagonal brace d2 18.175 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 1.80m . . . . . . . . . . . . . . . . . .64 328, 338, 348
Diagonal brace d2 18.200 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 2.45m . . . . . . . . . . . . . . . . . .64 Doka floor prop Eurex 60 550 . . . . . . . . . . . . . 80, 423
Diagonal brace d2 18.225 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 2.65m . . . . . . . . . . . . . . . . . .64 Doka folding platform K outside corner . . . . . . . . . 508
Diagonal brace d2 18.250 . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 2.90m . . . . . . . . . . . . . . . . . .64 Doka folding platform K 3.00m . . . . . . . . . . . . 394, 508
Diagonal brace d2 9.100 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 3.30m . . . . . . . . . . . . . . . . . .64 Doka folding platform K 4.50m . . . . . . . . . . . . 394, 508
Diagonal brace d2 9.125 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 3.60m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/150cm . . . 68
Diagonal brace d2 9.152 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 3.90m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/200cm . . . 68
Diagonal brace d2 9.175 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 4.50m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/200cm BS 68
Diagonal brace d2 9.200 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 4.90m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/250cm . . . 68
Diagonal brace d2 9.225 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 5.90m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/250cm BS 68
Diagonal brace d2 9.250 . . . . . . . . . . . . . . . . . . . . 438 Doka beam H20 eco P 9.00m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 21mm 50/300cm . . . 68
Diagonal brace Z 2.00m 128, 286, 295, 329, 340, 349, Doka beam H20 eco P .....m . . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 27mm 50/150cm . . . 68
449 Doka beam H20 eco P .....m BS . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 27mm 50/197cm . . . 68
Diagonal cross H 12.100 . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 1.80m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 27mm 50/197cm BS 68
Diagonal cross H 12.150 . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 2.45m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 27mm 50/200cm . . . 68
Diagonal cross H 12.200 . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 2.65m . . . . . 64, 330, 340, 350 Doka formwork sheet 3-S eco 27mm 50/200cm BS 68
Diagonal cross H 12.250 . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 2.90m . . . . . . . . . . . . . 64, 330 Doka formwork sheet 3-S eco 27mm 50/250cm . . . 68
Diagonal cross H 9.100 . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 3.30m . . . . . . . . . . . . . 64, 330 Doka formwork sheet 3-S eco 27mm 50/250cm BS 68
Diagonal cross H 9.150 . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 3.60m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S eco 27mm 50/300cm . . . 68
Diagonal cross H 9.200 . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 3.90m . . . . . . . . . . . . . 64, 350 Doka formwork sheet 3-S eco 27mm 50/97cm . . . . 68
Diagonal cross H 9.250 . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 4.50m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 20/200cm . . .68,
Diagonal cross 12.060 . . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top N 4.90m . . . . . . . . . . . . . . . . . .64 282, 292
Diagonal cross 12.100 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top N 5.90m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 20/250cm . . .68,
Diagonal cross 12.150 . . . . . . . . . . . . . . 283, 422, 438 Doka beam H20 top N .....m . . . . . . . . . . . . . . . . . . .64 282, 292
Diagonal cross 12.165 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top N .....m BS . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 40/200cm . . . 68
Diagonal cross 12.175 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 1.80m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 40/250cm . . . 68
Diagonal cross 12.200 . . . . . . . . . . . . . . 283, 422, 438 Doka beam H20 top P 2.45m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 50/200cm . . . 68
Diagonal cross 12.250 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 2.65m . . . . . 64, 330, 340, 350 Doka formwork sheet 3-S plus 21mm 50/250cm . . . 68
Diagonal cross 12.300 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 2.90m . . . . . . . . . . . . . 64, 330 Doka formwork sheet 3-S plus 21mm 9.7/200cm . .68,
Diagonal cross 18.100 . . . . . . . . . . . . . . 283, 422, 438 Doka beam H20 top P 3.30m . . . . . . . . . . . . . 64, 330 282, 292
Diagonal cross 18.150 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 3.60m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 21mm 9.7/250cm . .68,
Diagonal cross 18.165 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 3.90m . . . . . . . . . . . . . 64, 350 282, 292
Diagonal cross 18.175 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 4.50m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 27mm 20/200cm . . .68,
Diagonal cross 18.200 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 4.90m . . . . . . . . . . . . . . . . . .64 282, 292
Diagonal cross 18.250 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P 5.90m . . . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 27mm 20/250cm . . .68,
Diagonal cross 18.300 . . . . . . . . . . . . . . . . . . 422, 438 Doka beam H20 top P .....m . . . . . . . . . . . . . . . . . . .64 282, 292
Diagonal cross 9.060 . . . . . . . . . . . . . . . . . . . . . . . 422 Doka beam H20 top P .....m BS . . . . . . . . . . . . . . . .64 Doka formwork sheet 3-S plus 27mm 40/200cm . . . 68
Diagonal cross 9.100 . . . . . . . . . . . . . . . . . . . 422, 438 Doka beam I tec 20 12.00m . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-S plus 27mm 40/250cm . . . 68
Diagonal cross 9.150 . . . . . . . . . . . . . . . 283, 422, 438 Doka beam I tec 20 1.80m . . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-S plus 27mm 50/200cm . . . 68
Diagonal cross 9.165 . . . . . . . . . . . . . . . . . . . 422, 438 Doka beam I tec 20 2.45m . . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-S plus 27mm 50/250cm . . . 68
Diagonal cross 9.175 . . . . . . . . . . . . . . . . . . . 422, 438 Doka beam I tec 20 2.65m . . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-S plus 27mm 9.7/200cm . .68,
Diagonal cross 9.200 . . . . . . . . . . . . . . . 283, 422, 438 Doka beam I tec 20 2.90m . . . . . . . . . . . . . . . . . . . .60 282, 292
Diagonal cross 9.250 . . . . . . . . . . . . . . . 283, 422, 438 Doka beam I tec 20 3.30m . . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-S plus 27mm 9.7/250cm . .68,
Diagonal cross 9.300 . . . . . . . . . . . . . . . 283, 422, 438 Doka beam I tec 20 3.60m . . . . . . . . . . . . . . . . . . . .60 282, 292
Digital multimeter TLS . . . . . . . . . . . . . . . . . . . . . . 308 Doka beam I tec 20 3.90m . . . . . . . . . . . . . . . 60, 330 Doka formwork sheet 3-SO 21mm 100/100cm . . . . 68
Dismantling tool Framax stripping spindle I . . 124, 137 Doka beam I tec 20 4.50m . . . . . . . . . . . . . . . 60, 330 Doka formwork sheet 3-SO 21mm 100/50cm . . . . . 68
Distance piece SL-1 . . . . . . . . . . . . . . . . . . . . . . . . 447 Doka beam I tec 20 4.90m . . . . . . . . . . . . . . . 60, 330 Doka formwork sheet 3-SO 21mm 150/100cm . . . . 68
Distance piece 20cm . . . . . . . . . . . . . . . . . . . . . . . . 93 Doka beam I tec 20 5.35m . . . . . . . . . . . . . . . 60, 330 Doka formwork sheet 3-SO 21mm 150/50cm . . . . . 68
Distance piece 25cm . . . . . . . . . . . . . . . . . . . . . . . . 93 Doka beam I tec 20 5.90m . . . . . . . . . . . . . . . 60, 330 Doka formwork sheet 3-SO 21mm 150/50cm BS . . 68
Distance piece 30cm . . . . . . . . . . . . . . . . . . . . . . . . 93 Doka beam I tec 20 .....m . . . . . . . . . . . . . . . . . . . . .60 Doka formwork sheet 3-SO 21mm 15/200cm . . . . 321
Distance profile MF . . . . . . . . . . . . . . . . . . . . . . . . 389 Doka coil 16mm 86, 126, 138, 149, 158, 171, 179, 187, Doka formwork sheet 3-SO 21mm 200/100cm . . . . 68
Distribution plate FF20 . . . . . . . . . . . . . . . . . . . . . . 169 200, 212, 219, 229, 237, 245, 250, 258, 285, 293, Doka formwork sheet 3-SO 21mm 200/50cm . . . . . 68
Docking head . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 211 320, 328, 425, 441, 522, 534 Doka formwork sheet 3-SO 21mm 200/50cm BS . . 68
Docking screw . . . . . . . . . . . . . . . . . . . . . . . . . 85, 212 Doka column formwork platform 150/90cm . . 229, 237, Doka formwork sheet 3-SO 21mm 244/122cm . . . 321
Docking set . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 211 245 Doka formwork sheet 3-SO 21mm 250/100cm . . . . 68
Doka accessory box . . . . . . . . . . . . . . . . . . . . . . . . 100 Doka express anchor 16x125mm . . 86, 126, 138, 149, Doka formwork sheet 3-SO 21mm 250/125cm . . . . 68
Doka beam H16 N 1.80m . . . . . . . . . . . . . . . . . . . . . 64 157, 171, 179, 187, 200, 212, 219, 229, 237, 245, Doka formwork sheet 3-SO 21mm 250/50cm . . . . . 68
Doka beam H16 N 2.45m . . . . . . . . . . . . . . . . . . . . . 64 250, 258, 285, 293, 320, 328, 425, 441, 522, 534 Doka formwork sheet 3-SO 21mm 250/50cm BS . . 68
Doka beam H16 N 2.90m . . . . . . . . . . . . . . . . . . . . . 64 Doka fair-faced concrete start-up gear . . . . . . . . . .108 Doka formwork sheet 3-SO 21mm 300/100cm . . . . 68
Doka beam H16 N 3.30m . . . . . . . . . . . . . . . . . . . . . 64 Doka floor end-shutter clamp 283, 293, 329, 339, 349 Doka formwork sheet 3-SO 21mm 300/150cm . . . . 68
Doka beam H16 N 3.90m . . . . . . . . . . . . . . . . . . . . . 64 Doka floor prop Eco 20 250 . . . . . . . . . . . . . . 80, 348 Doka formwork sheet 3-SO 21mm 300/50cm . . . . . 68
Doka beam H16 N 4.90m . . . . . . . . . . . . . . . . . . . . . 64 Doka floor prop Eco 20 300 . . . . . . . . . . . . . . 80, 348 Doka formwork sheet 3-SO 21mm 300/50cm BS . . 68
Doka beam H16 N 9.00m . . . . . . . . . . . . . . . . . . . . . 64 Doka floor prop Eco 20 350 . . . . . . . . . . . . . . 80, 348 Doka formwork sheet 3-SO 21mm 350/100cm . . . . 68
Doka beam H16 N .....m . . . . . . . . . . . . . . . . . . . . . . 64 Doka floor prop Eco 20 400 . . . . . . . . . . . . . . 80, 348 Doka formwork sheet 3-SO 21mm 350/50cm . . . . . 68
Doka beam H16 P 1.80m . . . . . . . . . . . . . . . . . . . . . 65 Doka floor prop Eurex 20 top 150 . . 80, 282, 292, 318, Doka formwork sheet 3-SO 21mm 400/100cm . . . . 68
Doka beam H16 P 2.45m . . . . . . . . . . . . . . . . . . . . . 65 328, 338, 348 Doka formwork sheet 3-SO 21mm 400/50cm . . . . . 68
Doka beam H16 P 2.90m . . . . . . . . . . . . . . . . . . . . . 65 Doka formwork sheet 3-SO 21mm 450/100cm . . . . 68
569
Doka formwork sheet 3-SO 21mm 450/50cm . . . . . 68 Dokadek infill beam 1.22m 27mm . . . . . . . . . . . . . .319 DokaPly natural 20mm 250/125cm . . . . . . . . . . . . . 72
Doka formwork sheet 3-SO 21mm 500/100cm . . . . 68 Dokadek infill beam 2.44m 18mm . . . . . . . . . . . . . .319 DokaPly Spruce 18mm 250/125cm . . . . . . . . . . . . . 72
Doka formwork sheet 3-SO 21mm 500/50cm . . . . . 68 Dokadek infill beam 2.44m 21mm . . . . . . . . . . . . . .319 DokaPly Spruce 21mm 250/125cm . . . . . . . . . . . . . 72
Doka formwork sheet 3-SO 21mm 550/100cm . . . . 68 Dokadek infill beam 2.44m 27mm . . . . . . . . . . . . . .319 DoKart plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Doka formwork sheet 3-SO 21mm 550/50cm . . . . . 68 Dokadek panel pallet 0.81x2.44m . . . . . . . . . . . . . .101 Dokaset bottom angle for inside corner . . . . . . . . . 148
Doka formwork sheet 3-SO 21mm 600/100cm . . . . 68 Dokadek panel pallet 1.22x2.44m . . . . . . . . . . . . . .100 Dokaset closure cone 20cm . . . . . . . . . . . . . . . . . . 150
Doka formwork sheet 3-SO 21mm 600/150cm . . . . 68 Dokadek panel 0.81x2.44m . . . . . . . . . . . . . . . . . .318 Dokaset counter railing holder . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 21mm 600/50cm . . . . . 68 Dokadek panel 1.22x2.44m . . . . . . . . . . . . . . . . . .318 Dokaset counter railing 1.35m . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 100/100cm . . . . 68 Dokadek stripping tool . . . . . . . . . . . . . . . . . . . . . . .320 Dokaset counter railing 2.70m . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 100/50cm . . . . . 68 Dokadek support head . . . . . . . . . . . . . . . . . . . . . .318 Dokaset fibre concrete cone 30cm . . . . . . . . . . . . 150
Doka formwork sheet 3-SO 27mm 150/100cm . . . . 68 Dokadek suspension clamp H20 . . . . . . . . . . . . . . .319 Dokaset head anchor 12-36cm . . . . . . . . . . . . . . . 149
Doka formwork sheet 3-SO 27mm 150/50cm . . . . . 68 Dokadek system beam H20 eco P 1.10m . . . . . . . .321 Dokaset ladder 2.70m . . . . . . . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 150/50cm BS . . 68 Dokadek timber beam seat H20 . . . . . . . . . . . . . . .319 Dokaset outside corner 3.30m . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 15/200cm . . . . 321 Dokadek wall clamp . . . . . . . . . . . . . . . . . . . . . . . .318 Dokaset panel 1.35x2.70m . . . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 200/100cm . . . . 68 Dokadek wall head . . . . . . . . . . . . . . . . . . . . . . . . .319 Dokaset panel 1.35x2.70m with platform . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 200/50cm . . . . . 68 Dokadek XF drop head . . . . . . . . . . . . . . . . . . . . . .318 Dokaset panel 2.70x2.70m . . . . . . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 200/50cm BS . . 68 Dokadek XF edge head 18mm . . . . . . . . . . . . . . . .319 Dokaset panel 2.70x2.70m with platform . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 244/122cm . . . 321 Dokadek XF edge head 21mm . . . . . . . . . . . . . . . .319 Dokaset railing holder 15 degrees . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 250/100cm . . . . 68 Dokadek XF edge head 27mm . . . . . . . . . . . . . . . .319 Dokaset railing holder 30 degrees . . . . . . . . . . . . . 148
Doka formwork sheet 3-SO 27mm 250/125cm . . . . 68 Dokadek XF support timber 18mm . . . . . . . . . . . . .321 Dokaset ratchet 3/4" SW36 . . . . . . . . . . . . . . . . . . 149
Doka formwork sheet 3-SO 27mm 250/50cm . . . . . 68 Dokadek XF support timber 21mm . . . . . . . . . . . . .321 Dokaset tension tie 10-30cm . . . . . . . . . . . . . . . . . 149
Doka formwork sheet 3-SO 27mm 250/50cm BS . . 68 Dokadek XF support timber 27mm . . . . . . . . . . . . .321 Dokaset tie hole reducer 20.0 . . . . . . . . . . . . . . . . 149
Doka formwork sheet 3-SO 27mm 300/100cm . . . . 68 Dokadek XF wall head . . . . . . . . . . . . . . . . . . . . . .319 Dokaset universal waling holder . . . . . . . . . . . . . . 149
Doka formwork sheet 3-SO 27mm 300/150cm . . . . 68 Dokaflex table 2.00x4.00m 21mm . . . . . . . . . . . . . .292 Dokaset 2-part chain 1.50m . . . . . . . . . . . . . . . . . . 150
Doka formwork sheet 3-SO 27mm 300/50cm . . . . . 68 Dokaflex table 2.00x4.00m 27mm . . . . . . . . . . . . . .292 Doka-Trenn in canisters of 25l . . . . . . . . . . . . . . . . . 76
Doka formwork sheet 3-SO 27mm 300/50cm BS . . 68 Dokaflex table 2.00x5.00m 21mm . . . . . . . . . . . . . .292 Doka-Trenn in canisters of 5l . . . . . . . . . . . . . . . . . . 76
Doka formwork sheet 3-SO 27mm 350/100cm . . . . 68 Dokaflex table 2.00x5.00m 27mm . . . . . . . . . . . . . .292 Doka-Trenn in container of 1000l . . . . . . . . . . . . . . . 76
Doka formwork sheet 3-SO 27mm 350/50cm . . . . . 68 Dokaflex table 2.50x4.00m 21mm . . . . . . . . . . . . . .292 Doka-Trenn in drum of 200l . . . . . . . . . . . . . . . . . . . 76
Doka formwork sheet 3-SO 27mm 400/100cm . . . . 68 Dokaflex table 2.50x4.00m 27mm . . . . . . . . . . . . . .292 Double jib for forming wagon T . . . . . . . . . . . . . . . 470
Doka formwork sheet 3-SO 27mm 400/50cm . . . . . 68 Dokaflex table 2.50x5.00m 21mm . . . . . . . . . . . . . .292 Double scraper Xlife 100/150mm 1.40m 128, 140, 150,
Doka formwork sheet 3-SO 27mm 450/100cm . . . . 68 Dokaflex table 2.50x5.00m 27mm . . . . . . . . . . . . . .292 160, 203, 222
Doka formwork sheet 3-SO 27mm 450/50cm . . . . . 68 Dokamatic adapter XP . . . . . . . . . . . . . . . . . . . . . .535 Double wheeled transporter . . . . . . . . . . . . . . . . . . 428
Doka formwork sheet 3-SO 27mm 500/100cm . . . . 68 Dokamatic edge clamp 0.70m . . . . . . . . . . . . . . . . .284 Dummy plug TLS 4 poles . . . . . . . . . . . . . . . . . . . . 308
Doka formwork sheet 3-SO 27mm 500/50cm . . . . . 68 Dokamatic end-shutter unit 50cm . . . . . . . . . . . . . .284
Doka formwork sheet 3-SO 27mm 550/100cm . . . . 68 Dokamatic extension profile 0.50m . . . . . . . . . . . . .283 E
Doka formwork sheet 3-SO 27mm 550/50cm . . . . . 68 Dokamatic floor beam plate 60cm . . . . . . . . . . . . . .284 End toe-board Z 1.35m 128, 286, 295, 329, 340, 349,
Doka formwork sheet 3-SO 27mm 600/100cm . . . . 68 Dokamatic front wood strip 4x8cm 2.60m . . . . . . . .284 449
Doka formwork sheet 3-SO 27mm 600/150cm . . . . 68 Dokamatic insertion beam 1.95m . . . . . . . . . 284, 292 End-shutter shoe . . . . . . . . . . 283, 293, 329, 339, 349
Doka formwork sheet 3-SO 27mm 600/50cm . . . . . 68 Dokamatic insertion beam 2.45m . . . . . . . . . 284, 292 End-shutter tie rod 15.0 15-40cm 283, 293, 329, 339,
Doka load-bearing tower pallet . . . . . . . . . . . . . . . . 101 Dokamatic lifting strap 13.00m 127, 140, 159, 172, 180, 349
Doka multi-trip transport box 1.20x0.80m . . . . . . . 100 305 Eurex 60 550 . 86, 125, 171, 179, 187, 200, 218, 237,
Doka perforated tape 50x2.0mm 25m . . 128, 140, 160 Dokamatic platform bracket 1.00m . . . . . . . . . . . . .283 245, 257
Doka personal fall-arrest set 128, 173, 180, 188, 204, Dokamatic platform extension 0.50/2.00m . . . . . . .283 Extension clamp H20 for fork 1.5t . . . . . . . . . . . . . 305
213, 222, 321, 330, 340, 350, 390, 396, 404, 428, Dokamatic platform extension 0.50/2.50m . . . . . . .283 Extension Eurex 60 2.00m 80, 86, 125, 171, 179, 187,
443, 449, 510, 523, 536, 542 Dokamatic platform profile 1.00m . . . . . . . . . . . . . .283 200, 218, 237, 245, 257, 423, 440
Doka skeleton transport box 1.70x0.80m . . . . . . . . 100 Dokamatic scaffold connection . . . . . . . . . . . . . . . .283 Extension for beam forming support 60cm . .329, 338,
Doka sprayer for release agent . . . . . . . . . . . . . . . . 76 Dokamatic strut connection . . . . . . . . . . . . . . . . . . .283 349
Doka stacking pallet 1.20x0.80m . . . . . . . . . . . . . . 100 Dokamatic swivel head 40 . . . . . . . . . . . . . . . . . . .282 Extension for shifting trolley DF . . . . . . . . . . . . . . . 304
Doka stacking pallet 1.55x0.85m . . . . . . . . . . . . . . 100 Dokamatic table frame 1.50m . . . . . . . . . . . . . . . . .283 Extension profile H20 for fork 1.5t . . . . . . . . . . . . . 305
Doka texture sheet 3-SO 21mm 250/100cm . . . . . . 68 Dokamatic table grille 2.00x4.00m . . . . . . . . . . . . .282 Extension safety clamp for platform profile . . . . . . 270
Doka texture sheet 3-SO 21mm 250/50cm . . . . . . . 68 Dokamatic table grille 2.00x5.00m . . . . . . . . . . . . .282 Extension set for DoKart plus . . . . . . . . . . . . . . . . 304
Doka texture sheet 3-SO 21mm 300/100cm . . . . . . 68 Dokamatic table grille 2.50x4.00m . . . . . . . . . . . . .282 Extension set Framax stripping spindle I . . . . 124, 137
Doka texture sheet 3-SO 21mm 300/50cm . . . . . . . 68 Dokamatic table grille 2.50x5.00m . . . . . . . . . . . . .282 Extension 11cm 1/2" . . 203, 213, 221, 258, 268, 390,
Doka texture sheet 3-SO 21mm 400/100cm . . . . . . 68 Dokamatic table platform 1.00/2.00m . . . . . . . . . . .282 396, 404, 410, 485, 510
Doka texture sheet 3-SO 21mm 400/50cm . . . . . . . 68 Dokamatic table platform 1.00/2.50m . . . . . . . . . . .282 Extension 20cm 3/4" . . . . . . . 268, 308, 390, 404, 449
Doka texture sheet 3-SO 21mm 500/100cm . . . . . . 68 Dokamatic table Staxo spindle connector 284, 423, 439 Extension 22cm 1/2" . . 203, 213, 221, 258, 268, 390,
Doka texture sheet 3-SO 21mm 500/50cm . . . . . . . 68 Dokamatic table waling 12 4.00m . . . . . . . . . . . . . .282 396, 404, 410, 510
Doka texture sheet 3-SO 21mm 600/100cm . . . . . . 68 Dokamatic table waling 12 5.00m . . . . . . . . . . . . . .282 Eye-lug anchor 15.0 without tie rod . . . . . . . . . . . . 210
Doka texture sheet 3-SO 21mm 600/50cm . . . . . . . 68 Dokamatic table 2.00x4.00m 21mm . . . . . . . . . . . .282
Doka texture sheet 3-SO 27mm 250/100cm . . . . . . 68 Dokamatic table 2.00x4.00m 27mm . . . . . . . . . . . .282
Doka texture sheet 3-SO 27mm 250/50cm . . . . . . . 68 Dokamatic table 2.00x5.00m 21mm . . . . . . . . . . . .282
F
Doka texture sheet 3-SO 27mm 300/100cm . . . . . . 68 Dokamatic table 2.00x5.00m 27mm . . . . . . . . . . . .282 Facade anchor socket 15.0 . . . . . . . . . . . . . . . . . . 210
Doka texture sheet 3-SO 27mm 300/50cm . . . . . . . 68 Dokamatic table 2.50x4.00m 21mm . . . . . . . . . . . .282 Facade precast member clamp H . . . . . . . . . . . . . 210
Doka texture sheet 3-SO 27mm 500/100cm . . . . . . 68 Dokamatic table 2.50x4.00m 27mm . . . . . . . . . . . .282 Facade precast member clamp O . . . . . . . . . . . . . 210
Doka texture sheet 3-SO 27mm 500/50cm . . . . . . . 68 Dokamatic table 2.50x5.00m 21mm . . . . . . . . . . . .282 Facade precast member clamp V . . . . . . . . . 210, 509
Doka texture sheet 3-SO 27mm 600/100cm . . . . . . 68 Dokamatic table 2.50x5.00m 27mm . . . . . . . . . . . .282 Facade strut holder . . . . . . . . . . . . . . . . . . . . . . . . 211
Doka texture sheet 3-SO 27mm 600/50cm . . . . . . . 68 Doka-OptiX 1000l . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Facade waling connector . . . . . . . . . . . . . . . . . . . . 210
Doka Xtra head . . . . . . . . . . . . . . . . . . . . . . . 338, 439 Doka-OptiX 20l . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Facade waling holder . . . . . . . . . . . . . . . . . . . . . . . 211
Doka 4-part chain 3.20m 126, 140, 150, 158, 172, 180, Doka-OptiX 210l . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 Facade waling WS10 2.50m . . . . . . . . . . . . . 210, 265
188, 201, 213, 220, 230, 238, 251, 259, 307, 390, Dokaplex formwork sheet 18mm 250/150cm . . . . . .72 Facade waling WU14 6.00m . . . . . . . . . . . . . . . . . 210
396, 509, 522, 536 Dokaplex formwork sheet 18mm 300/150cm . . . . . .72 Fair-faced concrete distance piece 20cm . . . . . . . 108
Dokadek assembling tool B . . . . . . . . . . . . . . . . . . 319 Dokaplex formwork sheet 21mm 250/125cm . . . . . .72 Fair-faced concrete distance piece 25cm . . . . . . . 108
Dokadek assembling tool extension 2.00m . . . . . . 320 Dokaplex formwork sheet 21mm 250/150cm . . . . . .72 Fair-faced concrete distance piece 30cm . . . . . . . 108
Dokadek closure panel 0.15x0.81m . . . . . . . . . . . . 318 Dokaplex formwork sheet 21mm 300/150cm . . . . . .72 Fair-faced concrete plug 22mm concrete . . . . . . . 108
Dokadek closure panel 0.15x1.22m . . . . . . . . . . . . 318 Dokaplex formwork sheet 9mm 250/150cm . . . . . . .72 Fair-faced concrete plug 22mm plastic . . . . . . . . . 108
Dokadek closure panel 0.15x2.44m . . . . . . . . . . . . 318 Dokaplex formwork sheet 9mm 300/150cm . . . . . . .72 Fair-faced concrete plug 26mm concrete . . . . . . . 108
Dokadek corner head . . . . . . . . . . . . . . . . . . . . . . . 318 DokaPly Birch 12mm 125/250cm . . . . . . . . . . . . . . .72 Fair-faced concrete plug 41mm concrete . . . . . . . 108
Dokadek cross head . . . . . . . . . . . . . . . . . . . . . . . . 319 DokaPly Birch 12mm 150/300cm . . . . . . . . . . . . . . .72 Fair-faced concrete plug 41mm plastic . . . . . . . . . 108
Dokadek edge head 18mm . . . . . . . . . . . . . . . . . . 319 DokaPly Birch 15mm 125/250cm . . . . . . . . . . . . . . .72 Fair-faced concrete plug 52mm plastic . . . . . . . . . 108
Dokadek edge head 21mm . . . . . . . . . . . . . . . . . . 319 DokaPly Birch 18mm 125/250cm . . . . . . . . . . . . . . .72 Fair-faced concrete positioning cone MF 15.0 . . . . . 91
Dokadek edge head 27mm . . . . . . . . . . . . . . . . . . 319 DokaPly Birch 18mm 150/300cm . . . . . . . . . . . . . . .72 Fair-faced concrete positioning cone MF 20.0 . . . . . 95
Dokadek handrail-post shoe long . . . . . . . . . . . . . . 319 DokaPly Birch 18mm 62.5/250cm . . . . . . . . . . . . . . .72 Fair-faced concrete positioning cone 15.0 5cm . . . . 91
Dokadek handrail-post shoe short . . . . . . . . . . . . . 319 DokaPly Birch 21mm 125/250cm . . . . . . . . . . . . . . .72 Fair-faced concrete universal cone 22mm . . . . . . . 108
Dokadek infill beam pallet . . . . . . . . . . . . . . . . . . . 101 DokaPly Birch 21mm 62.5/250cm . . . . . . . . . . . . . . .72 Fastening bolt D16/130 . . . . . . . . . . . . . . . . . . . . . 318
Dokadek infill beam 0.81m 18mm . . . . . . . . . . . . . 319 DokaPly Birch 9mm 125/250cm . . . . . . . . . . . . . . . .72 Fastening bolt FF20 . . . . . . . . . . . . . . . . . . . . 169, 177
Dokadek infill beam 0.81m 21mm . . . . . . . . . . . . . 319 DokaPly eco 18mm 15/200cm . . . . . . . . . . . . . . . .321 Fastening plate . . . . . . . . . . . . . . . . . . . . . . . 197, 216
Dokadek infill beam 0.81m 27mm . . . . . . . . . . . . . 319 DokaPly eco 18mm 250/125cm . . . . . . . . . . . . . . . .72 Fastening shoe strut SL-1 . . . . . . . . . . . . . . . . . . . 446
Dokadek infill beam 1.22m 18mm . . . . . . . . . . . . . 319 DokaPly eco 21mm 250/125cm . . . . . . . . . . . . . . . .72 FF100 tec cover metal sheet 0.75m . . . . . . . . . . . 177
Dokadek infill beam 1.22m 21mm . . . . . . . . . . . . . 319 DokaPly eco 21mm 250/62.5cm . . . . . . . . . . . . . . . .72 FF100 tec cover metal sheet 1.00m . . . . . . . . . . . 177
FF100 tec cover metal sheet 1.25m . . . . . . . . . . . 177
570
FF100 tec cover metal sheet 2.50m . . . . . . . . . . . . 177 Form-ply protector 22mm . . . . . . . . . . . . . . . . . . . . .93 Framax steel closure plate 5cm 3.30m . . . . . . . . . 127
FF100 tec element 0.75x1.25m 21mm . . . . . . . . . . 176 Form-ply protector 32mm . . . . . . . . . . . . . . . . . . . . .93 Framax steel waling RD 0.40m . . . . . . . . . . . 123, 156
FF100 tec element 0.75x3.00m 21mm . . . . . . . . . . 176 Form-tie load read-off device 300kN . . . . . . . . . 93, 96 Framax stop-end tie . . . . . . . . . . . . . . . . 124, 157, 186
FF100 tec element 0.75x3.60m 21mm . . . . . . . . . . 176 Formwork element connector FF20/50 . 169, 197, 447 Framax stop-end waler tie 15-45cm . . . . . . . 124, 157
FF100 tec element 0.75x4.25m 21mm . . . . . . . . . . 176 Formwork element connector FF20/50 Z 169, 197, 264, Framax stop-end waler tie 15-75cm . . . . . . . 124, 157
FF100 tec element 0.75x6.00m 21mm . . . . . . . . . . 176 284 Framax stripping corner I 1.35m . . . . . . . . . . 123, 137
FF100 tec element 1.00x1.25m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x1.00m 21mm . . . . .168 Framax stripping corner I 2.70m . . . . . . . . . . 123, 137
FF100 tec element 1.00x3.00m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x1.00m 27mm . . . . .168 Framax stripping corner I 3.30m . . . . . . . . . . 123, 137
FF100 tec element 1.00x3.60m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x2.75m 21mm . . . . .168 Framax stripping spindle I . . . . . . . . . . . . . . . 123, 137
FF100 tec element 1.00x4.25m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x2.75m 27mm . . . . .168 Framax stripping spindle I with ratchet . . . . . 123, 137
FF100 tec element 1.00x6.00m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x3.75m 21mm . . . . .168 Framax supporting construct. frame bolt 36cm . . . 266
FF100 tec element 1.25x1.25m 21mm . . . . . . . . . . 176 Formwork element FF20 0.50x6.50m 21mm . . . . .168 Framax supporting construct. frame connector . . . 266
FF100 tec element 1.25x3.00m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x1.00m 21mm . . . . .168 Framax tensioning wedge R . . . . . . . . . . . . . . . . . 124
FF100 tec element 1.25x3.60m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x1.00m 27mm . . . . .168 Framax tie-holder bracket . . . . . . . . . . . . . . . 127, 159
FF100 tec element 1.25x4.25m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x2.75m 21mm . . . . .168 Framax transport bolt 5kN . . . . . . . . . . . . . . . 126, 246
FF100 tec element 1.25x6.00m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x2.75m 27mm . . . . .168 Framax transport gear . . . . . . . . . . . . . . . . . . 127, 159
FF100 tec element 2.50x1.25m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x3.75m 21mm . . . . .168 Framax triangular ledge 2.70m . . 127, 139, 159, 228,
FF100 tec element 2.50x3.00m 21mm . . . . . . . . . . 176 Formwork element FF20 0.75x6.50m 21mm . . . . .168 246, 251
FF100 tec element 2.50x3.60m 21mm . . . . . . . . . . 176 Formwork element FF20 1.00x1.00m 21mm . . . . .168 Framax universal corner waling . . . 124, 157, 284, 293
FF100 tec element 2.50x4.25m 21mm . . . . . . . . . . 176 Formwork element FF20 1.00x1.00m 27mm . . . . .168 Framax universal fixing bolt 10-16cm . 124, 149, 157,
FF100 tec element 2.50x6.00m 21mm . . . . . . . . . . 176 Formwork element FF20 1.00x2.75m 21mm . . . . .168 244, 266
FF100 tec grille 0.75x1.25m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 1.00x2.75m 27mm . . . . .168 Framax universal fixing bolt 10-25cm . 124, 157, 238,
FF100 tec grille 0.75x3.00m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 1.00x3.75m 21mm . . . . .168 266
FF100 tec grille 0.75x3.60m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 1.00x6.50m 21mm . . . . .168 Framax universal waling 0.60m . . . . . . . 124, 149, 157
FF100 tec grille 0.75x4.25m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x1.00m 21mm . . . . .168 Framax universal waling 0.90m . . . . . . . 124, 149, 157
FF100 tec grille 0.75x6.00m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x1.00m 27mm . . . . .168 Framax universal waling 1.50m . . . . . . . 124, 149, 157
FF100 tec grille 1.00x1.25m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x2.75m 21mm . . . . .168 Framax wedge bolt RA 7.5 . . . . . . . . . . . . . . . . . . 124
FF100 tec grille 1.00x3.00m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x2.75m 27mm . . . . .168 Framax wedge clamp . . . . . . . 124, 149, 157, 266, 395
FF100 tec grille 1.00x3.60m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x3.75m 21mm . . . . .168 Framax Xlife inside corner 1.35m . . . . . . . . . . . . . 123
FF100 tec grille 1.00x4.25m . . . . . . . . . . . . . . . . . . 176 Formwork element FF20 2.00x6.50m 21mm . . . . .168 Framax Xlife inside corner 2.70m . . . . . . . . . . . . . 123
FF100 tec grille 1.00x6.00m . . . . . . . . . . . . . . . . . . 176 Framax adapter XP . . . . . . . . . . . . . . . . . . . . . . . . .535 Framax Xlife inside corner 3.30m . . . . . . . . . . . . . 123
FF100 tec grille 1.25x1.25m . . . . . . . . . . . . . . . . . . 176 Framax adjustable clamp . . . . . . . . . . . . . . . 124, 157 Framax Xlife panel 0.30x1.35m . . . . . . . . . . . . . . . 122
FF100 tec grille 1.25x3.00m . . . . . . . . . . . . . . . . . . 176 Framax bracket 90 . . . . . . . . 126, 158, 237, 245, 395 Framax Xlife panel 0.30x2.70m . . . . . . . . . . . . . . . 122
FF100 tec grille 1.25x3.60m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.20x0.90m . . . . . . .156 Framax Xlife panel 0.30x3.30m . . . . . . . . . . . . . . . 122
FF100 tec grille 1.25x4.25m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.20x1.35m . . . . . . .123 Framax Xlife panel 0.45x1.35m . . . . . . . . . . . . . . . 122
FF100 tec grille 1.25x6.00m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.20x2.70m . . 123, 156 Framax Xlife panel 0.45x2.70m . . . . . . . . . . . . . . . 122
FF100 tec grille 2.50x1.25m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.25x0.90m . . . . . . .156 Framax Xlife panel 0.45x3.30m . . . . . . . . . . . . . . . 122
FF100 tec grille 2.50x3.00m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.25x1.35m . . . . . . .123 Framax Xlife panel 0.55x1.35m . . . . . . . . . . . . . . . 122
FF100 tec grille 2.50x3.60m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.25x2.70m . . 123, 156 Framax Xlife panel 0.55x2.70m . . . . . . . . . . . . . . . 122
FF100 tec grille 2.50x4.25m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.30x0.90m . . . . . . .156 Framax Xlife panel 0.55x3.30m . . . . . . . . . . . . . . . 122
FF100 tec grille 2.50x6.00m . . . . . . . . . . . . . . . . . . 176 Framax circular forming plate 0.30x1.35m . . . . . . .123 Framax Xlife panel 0.60x1.35m . . . . . . . . . . . . . . . 122
FF100 tec inside corner grille 1.25m . . . . . . . . . . . 177 Framax circular forming plate 0.30x2.70m . . 123, 156 Framax Xlife panel 0.60x2.70m . . . . . . . . . . . . . . . 122
FF100 tec inside corner grille 3.00m . . . . . . . . . . . 177 Framax clamping bolt 4-8cm . . . . . . . . . . . . . . . . . .128 Framax Xlife panel 0.60x3.30m . . . . . . . . . . . . . . . 122
FF100 tec inside corner grille 3.60m . . . . . . . . . . . 177 Framax combination nut 20.0 . . . . . . . . . . . . . . . . . .94 Framax Xlife panel 0.90x1.35m . . . . . . . . . . . . . . . 122
FF100 tec inside corner 1.25m 21mm . . . . . . . . . . 176 Framax fitting timber 10x12cm 2.70m . . 127, 159, 188 Framax Xlife panel 0.90x2.70m . . . . . . . . . . . . . . . 122
FF100 tec inside corner 3.00m 21mm . . . . . . . . . . 176 Framax fitting timber 10x12cm 3.30m . . . . . . . . . . .127 Framax Xlife panel 0.90x3.30m . . . . . . . . . . . . . . . 122
FF100 tec inside corner 3.60m 21mm . . . . . . . . . . 176 Framax fitting timber 2x12cm 2.70m . . . 127, 159, 188 Framax Xlife panel 1.35x1.35m . . . . . . . . . . . . . . . 122
FF100 tec outside corner grille 1.25m . . . . . . . . . . 177 Framax fitting timber 2x12cm 3.30m . . . . . . . . . . . .127 Framax Xlife panel 1.35x2.70m . . . . . . . . . . . . . . . 122
FF100 tec outside corner grille 3.00m . . . . . . . . . . 177 Framax fitting timber 3x12cm 2.70m . . . 127, 159, 188 Framax Xlife panel 1.35x3.30m . . . . . . . . . . . . . . . 122
FF100 tec outside corner grille 3.60m . . . . . . . . . . 177 Framax fitting timber 3x12cm 3.30m . . . . . . . . . . . .127 Framax Xlife panel 2.40x1.35m . . . . . . . . . . . . . . . 122
FF100 tec outside corner 1.25m 21mm . . . . . . . . . 176 Framax fitting timber 5x12cm 2.70m . . . 127, 159, 188 Framax Xlife panel 2.40x2.70m . . . . . . . . . . . . . . . 122
FF100 tec outside corner 3.00m 21mm . . . . . . . . . 176 Framax fitting timber 5x12cm 3.30m . . . . . . . . . . . .127 Framax Xlife panel 2.40x3.30m . . . . . . . . . . . . . . . 122
FF100 tec outside corner 3.60m 21mm . . . . . . . . . 176 Framax form-tie nut 20.0 . . . . . . . . . . . . . . . . . . . . . .94 Framax Xlife panel 2.70x2.70m . . . . . . . . . . . . . . . 122
FF20 adapter for Framax pouring platform U . . . . . 172 Framax formwork stripping timb. 10x12cm 2.85m 127, Framax Xlife panel 2.70x3.30m . . . . . . . . . . . . . . . 122
Fibre concrete plug 22mm . . . . . . . . . . . . . . . . . . . . 93 159 Framax Xlife universal panel SCC 0.90x2.70m . . . 122
Fibre concrete plug 27mm . . . . . . . . . . . . . . . . 95, 150 Framax formwork stripping timb. 10x12cm 3.45m .127 Framax Xlife universal panel 0.90x0.90m . . . 122, 244
Fibre concrete plug 30.7mm . . . . . . . . . . . . . . . . . . . 92 Framax foundation clamp 0.90m . . . . . . . . . . 128, 160 Framax Xlife universal panel 0.90x1.35m . . . 122, 244
Fibre concrete plug 32mm . . . . . . . . . . . . . . . . . . . . 92 Framax frontal triangular ledge 2.70m . 127, 159, 246 Framax Xlife universal panel 0.90x2.70m . . . 122, 244
Fibre concrete plug 35mm . . . . . . . . . . . . . . . . 95, 150 Framax hinged inside corner I galv. 0.90m . . . . . . .156 Framax Xlife universal panel 0.90x3.30m . . . 122, 244
Fibre concrete plug 40mm . . . . . . . . . . . . . . . . 95, 150 Framax hinged inside corner I galv. 1.35m . . . . . . .123 Framax Xlife universal panel 1.20x0.90m . . . 122, 244
Fibre concrete plug 45mm . . . . . . . . . . . . . . . . . . . . 92 Framax hinged inside corner I galv. 2.70m . . 123, 156 Framax Xlife universal panel 1.20x1.35m . . . 122, 244
Fibre concrete plug 54mm . . . . . . . . . . . . . . . . . . . . 92 Framax hinged inside corner I galv. 3.30m . . . . . . .123 Framax Xlife universal panel 1.20x2.70m . . . 122, 244
Fibre concrete tube 22mm 0.18m . . . . . . . . . . . . . . 93 Framax hinged outside corner A galv. 0.90m . . . . .156 Framax Xlife universal panel 1.20x3.30m . . . 122, 244
Fibre concrete tube 22mm 0.23m . . . . . . . . . . . . . . 93 Framax hinged outside corner A galv. 1.35m . . . . .123 Framax 3-in-1 pole tool . . . . . . . . . . . . . . . . . 128, 160
Fibre concrete tube 22mm 0.28m . . . . . . . . . . . . . . 93 Framax hinged outside corner A galv. 2.70m 123, 156 Frame strut for forming wagon T . . . . . . . . . . . . . . 470
Fibre concrete tube 22mm 0.38m . . . . . . . . . . . . . . 93 Framax hose to panel coupler SCC . . . . . . . . . . . .123 Frami adapter XP . . . . . . . . . . . . . . . . . . . . . . . . . . 535
Fibre concrete tube 22mm 1.25m . . . . . . . . . . . . . . 93 Framax lifting chain 4-part 3.20m . . . . . . . . . . . . . .246 Frami adjustable clamp . . . . . . . . . . . . . . . . . . . . . 138
Fibre concrete tube 27mm 1.25m . . . . . . . . . . . . . . 95 Framax lifting hook . . . . . . . . . . . . . . . . 126, 158, 246 Frami adjustment frame . . . . . . . . . . . . . . . . . . . . . 139
Filler neck GF SCC . . . . . . . . . . . . . . . . 178, 203, 221 Framax moulded timber 18mm 2.70m . . . . . 127, 159 Frami aligning clamp . . . . . . . . . . . . . . . . . . . . . . . 138
Filling press TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . 308 Framax moulded timber 18mm 3.30m . . . . . . . . . .127 Frami anchor waling 0.40m . . . . . . . . . . . . . . . . . . 137
Fixing clamp XS Framax . . . . . . . . . . . . . . . . . . . . 560 Framax moulded timber 21mm 2.70m . . . . . 127, 159 Frami anchoring panel 0.60x1.20m . . . . . . . . . . . . 136
Fixing plate 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Framax moulded timber 21mm 3.30m . . . . . . . . . .127 Frami anchoring panel 0.60x1.50m . . . . . . . . . . . . 136
Flange clamp G . . . . . . . . . . . . . . . . . . . 196, 216, 256 Framax moulded timber 27mm 2.70m . . . . . 127, 159 Frami bracket 60 . . . . . . . . . . . . . . . . . . 139, 250, 448
Flange clamp H20 . . . . . . . . . . . . . 170, 196, 210, 256 Framax moulded timber 27mm 3.30m . . . . . . . . . .127 Frami circular forming plate 0.20x1.50m . . . . . . . . 137
Flange claw . . . . . . . . . . . . . . . . . . . . . . . . . . 196, 216 Framax multi function clamp . . . . . 124, 149, 156, 186 Frami circular forming plate 0.25x1.50m . . . . . . . . 137
Flanged wheel T . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 Framax outside corner 0.90m . . . . . . . . . . . . . . . . .156 Frami circular forming plate 0.30x1.50m . . . . . . . . 137
Floor prop extension 0.50m . . . . . . . . . . . . . . . . . . . 80 Framax outside corner 1.35m . . . . . . . . . . . . . . . . .123 Frami clamp . . . . . . . . . . . . . . . . . . . . . . . . . . 137, 250
Floor support TLS 0.40m . . . . . . . . . . . . . . . . . . . . 306 Framax outside corner 2.70m . . . . . . . . . . . . 123, 156 Frami clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Folding bracket K . . . . . . . . . . . . . . . . . . . . . . 394, 508 Framax outside corner 3.30m . . . . . . . . . . . . . . . . .123 Frami corner connector . . . . . . . . . . . . . . . . . 138, 250
Fork lift shifting device TG . . . . . . . . . . . . . . . 428, 443 Framax plug R24.5 . . . . . . . . . . . . . . . . 128, 160, 246 Frami fitting timber 10x9cm 1.50m . . . . . . . . . . . . . 137
Fork wrench 13/17 203, 213, 221, 258, 268, 390, 396, Framax pouring platform O 1.25/2.70m . . . . 126, 158 Frami fitting timber 10x9cm 2.70m . . . . . . . . . . . . . 137
404, 410, 510 Framax pouring platform U 1.25/2.70m 126, 158, 172, Frami fitting timber 2x9cm 1.50m . . . . . . . . . . . . . . 137
Fork wrench 22/24 203, 213, 221, 258, 268, 390, 396, 201 Frami fitting timber 2x9cm 2.70m . . . . . . . . . . . . . . 137
404, 410, 510 Framax pressure plate 6/15 . . . . . . . . . 124, 157, 266 Frami fitting timber 3x9cm 1.50m . . . . . . . . . . . . . . 137
Fork wrench 30/32 203, 213, 221, 258, 268, 390, 396, Framax quick acting clamp RU 124, 137, 149, 156, 244 Frami fitting timber 3x9cm 2.70m . . . . . . . . . . . . . . 137
404, 410, 510 Framax stacking cone . . . . . . . . . . . . . . . . . . 126, 158 Frami fitting timber 5x9cm 1.50m . . . . . . . . . . . . . . 137
Fork wrench 36/41 . . . . . . . . . . . . . . . . . 268, 396, 510 Framax steel closure plate 5cm 0.90m . . . . . . . . . .159 Frami fitting timber 5x9cm 2.70m . . . . . . . . . . . . . . 137
Fork wrench 46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 Framax steel closure plate 5cm 1.35m . . . . . . . . . .127 Frami flat tie-rod 10-80cm . . . . . . . . . . . . . . . . . . . 139
Forming clamp 10-90cm . . . . . . . . . . . . . . . . . . . . . 104 Framax steel closure plate 5cm 2.70m . . . . . 127, 159 Frami floor fixing plate . . . . . . . . . . . . . . . . . . . . . . 140
571
Frami foundation clamp . . . . . . . . . . . . . . . . . . . . . 140 Handrail-post shoe XP . . . . . . . . . . . . . . . . . . . . . .534 Longitudinal beam for forming wagon T . . . . . . . . . 471
Frami frame hole plug . . . . . . . . . . . . . . . . . . 139, 251 Heavy duty screw jack 130 . . . . . . . . . . . . . . . . . . .423 Lowering head H20 . . . . . . . . . . . . . . . . 328, 348, 439
Frami frontal triangular ledge 2.70m . . . . . . . . . . . 139 Heavy duty screw jack 70 . . . . . . . . . . . . . . . 423, 554 Lowering spindle strut SL-1 . . . . . . . . . . . . . . . . . . 446
Frami frontal triangular ledge 3.00m . . . . . . . . . . . 139 Heavy duty screw jack 70 top . . . . . . . . . . . . . . . . .422 Lowering wedge SL-1 420kN . . . . . . . . . . . . . . . . . 446
Frami hinged inside corner I galv. 1.20m . . . . . . . . 136 Heavy duty wheel 15kN . . . . . . . . . . . . . . . . . . . . .428 Lowering wedge 1000kN . . . . . . . . . . . . . . . . . . . . 269
Frami hinged inside corner I galv. 1.50m . . . . . . . . 136 Heavy duty wheel 90kN . . . . . . . . . . . . . . . . . . . . .267 Lowering zylinder SL-1 250kN . . . . . . . . . . . . . . . . 267
Frami hinged outside corner A galv. 1.20m . . . . . . 136 Height adjuster for formwork beams . . . . . . . 202, 221
Frami hinged outside corner A galv. 1.50m . . . . . . 136 Height adjuster WS10-WU16 . . . . 173, 180, 202, 221 M
Frami inside corner 1.20m 20cm . . . . . . . . . . . . . . 136 Hexagon nut 15.0 . . . . . . . . . . . . . . . . . . . . . . 90, 447 Main beam head . . . . . . . . . . . . . . . . . . . . . . . . . . 410
Frami inside corner 1.50m 20cm . . . . . . . . . . . . . . 136 Hexagon nut 20.0 . . . . . . . . . . . . . . . . . . . . . . . . . . .94 Maintenance toolbox TLS . . . . . . . . . . . . . . . . . . . 308
Frami inside corner 2.70m 20cm . . . . . . . . . . . . . . 136 Hexagon nut 26.5 . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Manhole B 70/60cm . . . . . . . . . . . . . . . . . . . . 396, 561
Frami inside corner 3.00m 20cm . . . . . . . . . . . . . . 136 Hexagon nut 32.0 . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Mobile scaffold tower Z 128, 286, 295, 329, 340, 349,
Frami lifting hook . . . . . . . . . . . . . . . . . . . . . . 138, 251 Hexagon spanner head 46 3/4" . . . . . . . . . . . . . . .268 449
Frami outside corner 1.20m . . . . . . . . . . . . . . . . . . 136 Hole gauge Top50 . . . . . . . . . . . . . . . . . . . . . 203, 259 Monotec combination nut 15.0 Framax . . . . . 128, 160
Frami outside corner 1.50m . . . . . . . . . . . . . . . . . . 136 Hole plug 29mm . . . . . . . . . . . . . . . . . . . . . . . 91, 485 Monotec form-tie nut 15.0 Framax . . . . . . . . . 129, 160
Frami outside corner 2.70m . . . . . . . . . . . . . . . . . . 136 Horizontal brace d2 100 . . . . . . . . . . . . . . . . . . . . .438 Monotec joint plate 0.75m Framax . . . . . . . . . 129, 160
Frami outside corner 3.00m . . . . . . . . . . . . . . . . . . 136 Horizontal brace d2 125 . . . . . . . . . . . . . . . . . . . . .438 Monotec plug . . . . . . . . . . . . . . . . . . . . . . . . . 129, 160
Frami pallet 1.20m . . . . . . . . . . . . . . . . . . . . . . . . . 100 Horizontal brace d2 152 . . . . . . . . . . . . . . . . . . . . .438 Monotec ratchet 3/4" SW17 . . . . . . . . . . . . . . 129, 160
Frami pallet 1.50m . . . . . . . . . . . . . . . . . . . . . . . . . 100 Horizontal brace d2 175 . . . . . . . . . . . . . . . . 438, 508 Monotec sealing plug Alu-Framax . . . . . . . . . . . . . 160
Frami panel shoe . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Horizontal brace d2 200 . . . . . . . . . . . . . . . . . . . . .438 Monotec sealing plug Framax . . . . . . . . . . . . . . . . 129
Frami plug . . . . . . . . . . . . . . . . . . . . . . . . . . . 139, 251 Horizontal brace d2 225 . . . . . . . . . . . . . . . . . . . . .438 Monotec tie 15.0 15-25cm Framax . . . . . . . . 128, 160
Frami plywood support 18mm . . . . . . . . . . . . . . . . 137 Horizontal brace d2 250 . . . . . . . . . . . . . . . . . . . . .438 Monotec tie 15.0 25-35cm Framax . . . . . . . . 128, 160
Frami plywood support 21mm . . . . . . . . . . . . . . . . 137 Horizontal brace Z 1.80m 128, 286, 295, 329, 340, 349, Mounting sleeve M . . . . . . . . . . . . . . . . . . . . . . . . . 521
Frami plywood support 27mm . . . . . . . . . . . . . . . . 137 449 Multi-purpose waling SL-1 WU16 0.625m . . . . . . . 196
Frami profile adapter for stripping corner I . . . . . . . 137 Horizontal frame for forming wagon T . . . . . . . . . . .470 Multi-purpose waling SL-1 WU16 0.75m . . . . . . . . 196
Frami profile connector 5-18cm . . . . . . . . . . . . . . . 138 Horizontal profile MF with handrail post . . . . . . . . .388 Multi-purpose waling SL-1 WU16 1.00m . . . . 196, 270
Frami stop-end waler tie 15-45cm . . . . . . . . . . . . . 138 Horizontal strut 1.35m . . . . . . . . . . . . . . . . . . . . . . .508 Multi-purpose waling SL-1 WU16 1.25m . . . . . . . . 196
Frami tie-adapter for stripping corner I . . . . . . . . . . 137 H20 screw-on bracket for formwork sheets . . 177, 203, Multi-purpose waling SL-1 WU16 1.50m . . . . . . . . 196
Frami tie-holder bracket . . . . . . . . . . . . . . . . . . . . . 139 222, 284, 293 Multi-purpose waling SL-1 WU16 1.75m . . . . . . . . 196
Frami transport hook 2.5kN . . . . . . . . . . . . . . 140, 251 Multi-purpose waling SL-1 WU16 2.00m . . . . . . . . 196
Frami universal fixing bolt 5-12cm . . . . . . . . . 138, 250 I Multi-purpose waling SL-1 WU16 2.25m . . . . . . . . 196
Frami universal waling 0.70m . . . . . . . . . . . . . . . . . 138 I tec 20 beam-end sealant 2.5l . . . . . . . . . . . . . . . . .60 Multi-purpose waling SL-1 WU16 2.50m . . . . . . . . 196
Frami universal waling 1.25m . . . . . . . . . . . . . . . . . 138 Inner railing 250 . . . . . . . . . . . . . . . . . . . . . . . . . . .554 Multi-purpose waling SL-1 WU16 3.00m . . . . 196, 270
Frami wedge clamp . . . . . . . . . . . . . . . . . . . . . . . . 138 Insertion adapter XP . . . . . . . . . . . . . . . . . . . . . . . .535 Multi-purpose waling WS10 Top50 0.50m . . .170, 196,
Frami Xlife panel 0.30x1.20m . . . . . . . . . . . . . . . . . 136 Inside corner FF20 0.50m 27mm . . . . . . . . . . . . . .168 210, 447
Frami Xlife panel 0.30x1.50m . . . . . . . . . . . . . . . . . 136 Inside corner FF20 1.00m 21mm . . . . . . . . . . . . . .168 Multi-purpose waling WS10 Top50 0.75m . . .170, 196,
Frami Xlife panel 0.30x2.70m . . . . . . . . . . . . . . . . . 136 Inside corner FF20 1.00m 27mm . . . . . . . . . . . . . .168 210, 447
Frami Xlife panel 0.30x3.00m . . . . . . . . . . . . . . . . . 136 Inside corner FF20 2.75m 21mm . . . . . . . . . . . . . .168 Multi-purpose waling WS10 Top50 1.00m . . .170, 196,
Frami Xlife panel 0.45x1.20m . . . . . . . . . . . . . . . . . 136 Inside corner FF20 2.75m 27mm . . . . . . . . . . . . . .168 210, 256, 264, 447
Frami Xlife panel 0.45x1.50m . . . . . . . . . . . . . . . . . 136 Inside corner plate 3.00m . . . . . . . . . . . . . . . . . . . .199 Multi-purpose waling WS10 Top50 1.25m . . .170, 196,
Frami Xlife panel 0.45x2.70m . . . . . . . . . . . . . . . . . 136 Inside corner plate 4.00m . . . . . . . . . . . . . . . . . . . .199 210, 256, 447
Frami Xlife panel 0.45x3.00m . . . . . . . . . . . . . . . . . 136 Intermediate flange for supp. constr. frame . . . . . .270 Multi-purpose waling WS10 Top50 1.50m . . .170, 196,
Frami Xlife panel 0.60x1.20m . . . . . . . . . . . . . . . . . 136 Intermediate head DF . . . . . . . . . . . . . . . . . . . . . . .292 447
Frami Xlife panel 0.60x1.50m . . . . . . . . . . . . . . . . . 136 Intermediate plate F 2.00m . . . . . . . . . . . . . . . . . . .266 Multi-purpose waling WS10 Top50 1.75m . . .170, 196,
Frami Xlife panel 0.60x2.70m . . . . . . . . . . . . . . . . . 136 Internal angle plate H20 Top50 . . . . . . . . . . . . . . . .197 264, 447
Frami Xlife panel 0.60x3.00m . . . . . . . . . . . . . . . . . 136 Multi-purpose waling WS10 Top50 2.00m . . .170, 196,
Frami Xlife panel 0.75x1.20m . . . . . . . . . . . . . . . . . 136
Frami Xlife panel 0.75x1.50m . . . . . . . . . . . . . . . . . 136
J 264, 428, 443, 447
Jib frame for forming wagon T . . . . . . . . . . . . . . . .470 Multi-purpose waling WS10 Top50 2.25m . . .170, 196,
Frami Xlife panel 0.75x2.70m . . . . . . . . . . . . . . . . . 136 447
Frami Xlife panel 0.75x3.00m . . . . . . . . . . . . . . . . . 136 Jib slide for forming wagon T . . . . . . . . . . . . . . . . .470
Joint plate 3.00m . . . . . . . . . . . . . . . . . . . . . . 199, 217 Multi-purpose waling WS10 Top50 2.50m . . .170, 196,
Frami Xlife panel 0.90x1.20m . . . . . . . . . . . . . . . . . 136 210, 238, 264, 447
Frami Xlife panel 0.90x1.50m . . . . . . . . . . . . . . . . . 136 Joint plate 4.00m . . . . . . . . . . . . . . . . . . . . . . 199, 217
Multi-purpose waling WS10 Top50 2.75m . . .170, 196,
Frami Xlife panel 0.90x2.70m . . . . . . . . . . . . . . . . . 136 238, 264, 447
Frami Xlife panel 0.90x3.00m . . . . . . . . . . . . . . . . . 136 L Multi-purpose waling WS10 Top50 3.00m . . .170, 196,
Frami Xlife universal panel 0.75x1.20m . . . . . 136, 250 Ladder adapter SK . . . . . . . . . . . . . . . . . . . . . . . . .561 238, 264, 394, 447
Frami Xlife universal panel 0.75x1.50m . . . . . 136, 250 Ladder adapter XS . . . . . . . . . . . . . . . . . . . . . . . . .561 Multi-purpose waling WS10 Top50 3.50m . . .170, 196,
Frami Xlife universal panel 0.75x2.70m . . . . . 136, 250 Ladder bolt XS . . . . . . . . . . . . . . . . . . . . . . . . . . . .561 238, 264, 394, 447, 509
Frami Xlife universal panel 0.75x3.00m . . . . . 136, 250 Ladder cage exit XS . . . . . . . . . . . . . . . . . . . . . . . .560 Multi-purpose waling WS10 Top50 4.00m . . .170, 196,
Frami Xlife universal panel 0.90x1.20m . . . . . 136, 250 Ladder cage XS 0.25m . . . . . . . . . . . . . . . . . . . . . .560 238, 264, 394, 447
Frami Xlife universal panel 0.90x1.50m . . . . . 136, 250 Ladder cage XS 1.00m . . . . . . . . . . . . . . . . . . . . . .560 Multi-purpose waling WS10 Top50 4.50m . . .170, 196,
Frami Xlife universal panel 0.90x2.70m . . . . . 136, 250 Ladder clamp SK . . . . . . . . . . . . . . . . . . . . . . . . . . .561 238, 447
Frami Xlife universal panel 0.90x3.00m . . . . . 136, 250 Ladder extension XS 2.30m . . . . . . . . . . . . . . . . . .560 Multi-purpose waling WS10 Top50 5.00m . . .170, 196,
Friction type ratchet SW27 . . . . . . . . . . . . . . . . . . . . 93 Ladder holder SK . . . . . . . . . . . . . . . . . . . . . . . . . .561 238, 447
Front spindle for supp. construction frame . . . . . . . 265 Landing level safety gate TLS with handle . . . . . . .306 Multi-purpose waling WS10 Top50 5.50m . . .170, 196,
Frontal triangular ledge KS 15 4.00m . . . . . . . . . . . 228 Landing level safety gate TLS w. limit switch . . . . .307 238, 447
Frontal triangular ledge KS 20 4.00m . . . . . . . . . . . 228 Landing railing 250 . . . . . . . . . . . . . . . . . . . . . . . . .555 Multi-purpose waling WS10 Top50 6.00m . . .170, 196,
Lashing strap 5.00m . . . . . . . 285, 293, 320, 328, 338 238, 447
G Lifting beam TLS . . . . . . . . . . . . . . . . . . . . . . . . . . .307 Multi-purpose waling WU12 Top50 1.00m . . . . . . . 196
Grease cartridge TLS . . . . . . . . . . . . . . . . . . . . . . . 308 Lifting beam 110kN 6.00m . . . . . . . . . . . . . . 390, 396 Multi-purpose waling WU12 Top50 1.25m . . . . . . . 196
Guide roller Z D200mm 128, 286, 295, 329, 340, 349, Lifting bracket 173, 180, 197, 210, 216, 256, 329, 339 Multi-purpose waling WU12 Top50 1.50m . . .196, 210,
449 Lifting bracket F 2.00m rear . . . . . . . . . . . . . . . . . .267 256
Lifting bracket for column formwork . . . . . . . 198, 256 Multi-purpose waling WU12 Top50 1.75m . . . 196, 256
Lifting chain 100cm 15kN . . . . . . . . . . . . . . . 172, 180
H Lifting cross-bar TLS 10.50m . . . . . . . . . . . . . . . . .307
Multi-purpose waling WU12 Top50 2.00m . . . 196, 265
Half splice plate . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Multi-purpose waling WU12 Top50 2.50m . . . . . . . 196
Lifting cross-bar TLS 15.00m . . . . . . . . . . . . . . . . .307 Multi-purpose waling WU12 Top50 3.00m . . . 196, 265
Handrail clamp S . . . . . . . . . . . . . . . . . . . . . . . . . . 542 Lifting extension bracket DF 1t . . . . . . . . . . . . . . . .305
Handrail clamp T . . . . . . . . . . . . . . . . . . . . . . . . . . 542 Multi-purpose waling WU12 Top50 3.50m . . . . . . . 196
Lifting extension bracket DF 1.5t . . . . . . . . . . . . . . .305 Multi-purpose waling WU12 Top50 4.00m . . . . . . . 196
Handrail extension Corner transition M 1.80m . . . . 520 Lifting hook DF . . . . . . . . . . . . . . . . . . . . . . . 305, 339
Handrail extension K . . . . . . . . . . . . . . . . . . . . . . . 509 Multi-trip transport box partition 0.80m . . . . . . . . . 100
Lifting mast anchoring TLS cross bar 0.40m . . . . . .306 Multi-trip transport box partition 1.20m . . . . . . . . . 100
Handrail extension T 1.00m . . . . . . . . . . . . . . . . . . 471 Lifting mast anchoring TLS mast connection . . . . .306
Handrail post T 0.70m . . . . . . . . . . . . . . . . . . . . . . 471 Lifting mast anchoring TLS strut . . . . . . . . . . . . . . .306
Handrail post T 1.80m . 172, 201, 220, 270, 285, 293, Lifting mast anchoring TLS wall . . . . . . . . . . . . . . .306
N
339, 426, 485 Lifting mast TLS 1.50m . . . . . . . . . . . . . . . . . . . . . .306 Nailing cone 15.0 . . . . . . . . . . . . . . . . . . . 91, 485, 521
Handrail post XP 0.60m . . . . . . . . . . . . . . . . . . . . . 534 Lifting platform TLS back 3.00x1.60m . . . . . . . . . . .305 Normal coupler 48mm . . . . . . 213, 426, 442, 447, 555
Handrail post XP 1.20m . . . . . . . . . . . . . . . . . 442, 534 Lifting platform TLS centre 3.00x1.60m . . . . . . . . .305
Handrail post Z 1.80m . 128, 286, 295, 329, 340, 349, Lifting ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 O
449 Lifting rod 15.0 . . . . . . . . . . . . . . . . . . . . . . . 427, 443 Offset plate FF20 . . . . . . . . . . . . . . . . . . . . . . 169, 197
Handrail post 1.00m . . . . . . . . . . . . 139, 149, 270, 484 Locking hook KS . . . . . . . . . . . . . . . . . . . . . . . . . . .228 Outer railing 250 . . . . . . . . . . . . . . . . . . . . . . . . . . 554
Handrail post 1.10m . . . . . . . . . . . . . . . . . . . . . . . . 542 Locking rod 15.0 330mm . . . . . . . . . . . . . . . . 422, 439 Outside angle plate FF20 21mm . . . . . . . . . . . . . . 169
Handrail post 1.50m . . . . . . . . . . . . . . . . . . . . . . . . 201
572
Outside angle plate FF20 27mm . . . . . . . . . . . . . . 169 Protective cap H20 . . . . . . . . . . . . . . . . . . . . 197, 210 Scaffold tube 48.3mm 2.00m 126, 139, 158, 172, 179,
Protective grating TLS 1.80m . . . . . . . . . . . . . . . . .305 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
P Protective grating XP 2.00x0.60m . . . . . . . . . . . . . .535 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Pallet for platform brackets M . . . . . . . . . . . . . . . . . 101 Protective grating XP 2.00x1.20m . . . . . . . . . . . . . .535 Scaffold tube 48.3mm 2.50m 126, 139, 158, 172, 179,
Panel closure tool D125 SCC . . . . . 123, 178, 203, 221 Protective grating XP 2.50x0.60m . . . . . . . . . . . . . .535 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Panel strut 340 IB . . 84, 124, 138, 149, 157, 170, 178, Protective grating XP 2.50x1.20m . . . . . . . . . . . . . .535 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
186, 199, 211, 218, 229, 236, 244, 250, 256, 395, Protective grating XP 2.70x0.60m . . . . . . . . . . . . . .535 Scaffold tube 48.3mm 3.00m 126, 139, 158, 172, 179,
448 Protective grating XP 2.70x1.20m . . . . . . . . . . . . . .535 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Panel strut 540 IB . . 84, 125, 157, 170, 178, 186, 199, Protective plate KS . . . . . . . . . . . . . . . . . . . . . . . . .228 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
211, 218, 229, 236, 244, 257, 448 Protective plate KS top . . . . . . . . . . . . . . . . . . . . . .228 Scaffold tube 48.3mm 3.50m 126, 139, 158, 172, 179,
Parapet adapter XP . . . . . . . . . . . . . . . . . . . . . . . . 535 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Pawl for shaft platform . . . . . . . . . . . . . . . . . . . . . . 410 Q 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Pigtail anchor 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Quick-locking strap 55cm . . . . . . . . . . . . . . . 510, 522 Scaffold tube 48.3mm 4.00m 126, 139, 158, 172, 179,
Pigtail anchor 20.0 . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Quick-release nut 20.0 . . . . . . . . . . . . . . . . . . . . . . .94 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Pigtail anchor 26.5 . . . . . . . . . . . . . . . . . . . . . . . . . . 96 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Scaffold tube 48.3mm 4.50m 126, 139, 158, 172, 179,
Pin coupling 60mm . . . . . . . . . . . . . . . . . . . . . . . . . 426 R 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Pin D16/112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395 Rafter plate left . . . . . . . . . . . . . . . 203, 221, 259, 426
Plastic mallet 4kg . . . . . . . . . . . . . . . . . . . . . . 285, 294 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Rafter plate right . . . . . . . . . . . . . . 203, 221, 259, 426 Scaffold tube 48.3mm 5.00m 126, 139, 158, 172, 179,
Plastic tube 22mm 2.50m . . . . . . . . . . . . . . . . . . . . . 92 Railing clamp XP 40cm . . . . . . . . . . . . . . . . . . . . . .534
Plastic tube 26mm 2.00m . . . . . . . . . . . . . . . . . . . . . 95 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Railing clamp XP 85cm . . . . . . . . . . . . . . . . . . . . . .534 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Plastic tube 32mm 2.00m . . . . . . . . . . . . . . . . . . . . . 96 Railing frame Z 1.00m . . 128, 286, 295, 329, 340, 349,
Platform adapter KS . . . . . . . . . . . . . . . . . . . . . . . . 229 Scaffold tube 48.3mm 5.50m 126, 139, 158, 172, 179,
449 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Platform adapter RS . . . . . . . . . . . . . . . . . . . . . . . . 237 Railing KS 1.00x0.85m . . . . . . . . . . . . . . . . . . . . . .229
Platform bracket M . . . . . . . . . . . . . . . . . . . . . . . . . 520 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Railing strut for forming wagon T . . . . . . . . . . . . . .471 Scaffold tube 48.3mm 6.00m 126, 139, 158, 172, 179,
Platform decking M 3.00m . . . . . . . . . . . . . . . . . . . 520 Railing T bottom . . . . . . . . . . . . . . . . . . . . . . . . . . .472
Platform diagonal strut Z 128, 286, 295, 329, 340, 349, 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Railing T top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .471 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
449 Ratcher-ring wrench 30/32 . . . . . . . . . . . . . . . . . . .449
Platform extension plate T . . . . . . . . . . . . . . . . . . . 471 Scaffold tube 48.3mm .....m . 126, 139, 158, 172, 179,
Ratchet MF 3/4" SW50 . . . . . . . . . . . . . . . . . 391, 404 187, 201, 212, 219, 245, 251, 258, 267, 294, 390,
Platform planking KS . . . . . . . . . . . . . . . . . . . . . . . 229 Raw sheet 3-S 31mm 300/150cm . . . . . . . . . . . . . . .68
Platform profile 1.00m f. supp. constr. frame . . . . . 270 394, 403, 426, 442, 447, 484, 509, 522, 535, 555
Raw sheet 3-S 38mm 300/150cm . . . . . . . . . . . . . . .68 Screw dr. f. recessed-head scr. PZ 2 . . . . . . . . . . . 308
Platform stairway 0.97m .286, 294, 320, 329, 339, 349 Ready-to-use platform for forming wagon T . . . . . .471
Platform transport fork K/M . . . . . . . . . . . . . . 509, 523 Screw jack foot . . . . . . . . . . . . . . . . . . . . . . . . 423, 554
Rear spindle for supp. construction frame . . . . . . .265 Screw jack U-head . . . . . . . . . . . . . . . . . . . . . . . . . 422
Platform transport fork K/M plus . . . . . . . . . . . 509, 522 Reducer 26/22mm . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Platform Z with manhole flap 1.80m . . . 128, 286, 295, Screw sleeve 20.0 . . . . . . . . . . . . . . . . . . . . . 534, 542
Removable folding tripod top . . . . 318, 328, 338, 348 Screw-in cone 30kN 15.0 . . . . . . . . . . . . . 91, 485, 521
329, 340, 349, 449 Removable folding tripod 1.20m . . 318, 328, 338, 348,
Platform Z without manhole flap 1.80m 128, 286, 295, Screw-on access bracket MF75 . . . . . . . 267, 389, 403
425 Screw-on coupler 48mm 50 . 126, 139, 158, 172, 180,
329, 340, 349, 449 REPOXAL two component adhesive . . . . . . . . . . . .93
Pliers for external circlips 40-100mm . . . . . . . . . . . 308 188, 201, 212, 219, 251, 258, 264, 267, 294, 390,
Retaining plate 15.0 . . . . . . . . . . . . . . . 293, 427, 443 394, 404, 442, 447, 484, 509
Plug for closure plate R25 . . . 283, 293, 329, 339, 349 Retraction set D15 . . . . . . . . . . . . . . . . . . . . . . . . .403
Plug 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 Screw-on coupler 48mm 95 . . 212, 267, 390, 404, 442
Reversible ratchet 1/2" . 188, 203, 213, 221, 258, 268, Screw-on shoe XP . . . . . . . . . . . . . . . . . . . . . . . . . 534
Plug 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 285, 294, 390, 396, 404, 410, 485, 510
Plug 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Screw-set M16x40 8.8 . . . . . . . . . . . . . . . . . . 238, 446
Reversible ratchet 3/4" . 213, 221, 268, 308, 390, 404, Screw-set M20x65 8.8 . . . . . . . . . . . . . . . . . . . . . . 447
Plumbing spindle MF 3.00m . . . . . . . . . . . . . . . . . . 388 449
Plumbing spindle MF 4.50m . . . . . . . . . . . . . . . . . . 388 Screw-set M20x70 8.8 . . . . . . . . . . . . . . . . . . . . . . 446
Ring spanner 17/19 203, 213, 221, 258, 268, 390, 396, Screw-set M20x90 8.8 shank length 38mm . . . . . . 446
Plumbing strut Eurex 60 550 . 86, 125, 171, 179, 187, 404, 410, 510
200, 218, 237, 245, 257, 424, 440 Sealing disk 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Ring spanner 46 . . . . . . . . . . . . . . . . . . . . . . . . . . .449 Sealing disk 50 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Plumbing strut shoe Eurex 60 EB . 86, 125, 171, 179, Ring spanner 80 . . . . . . . . . . . . . . . . . . . . . . . . . . .270
187, 200, 218, 237, 245, 257, 424, 440 Sealing disk 53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Rock anchor installation tube . . . . . . . . . . . . . . . . . .92 Sealing sleeve K 15.0 . . . . . . . . . . . . . . . . . . . . . . . 91
Plumbing strut 260 IB . . . . . . . . . . . . 84, 138, 250, 521 Rock anchor spreader unit 15.0 . . . . . . . . . . . . . . . .92
Plumbing strut 340 IB 84, 124, 138, 149, 157, 170, 178, Sealing sleeve K 20.0 . . . . . . . . . . . . . . . . . . . . . . . 95
Rock anchor spreader unit 20.0 . . . . . . . . . . . . . . . .95 Sealing sleeve K 26.5 . . . . . . . . . . . . . . . . . . . . . . . 96
186, 199, 211, 218, 229, 236, 244, 250, 256, 285, Rod connector 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . .92
395, 424, 440, 448, 522 Sealing sleeve S 15.0 5cm . . . . . . . . . . . . . . . . . . . 90
Rod connector 26.5 . . . . . . . . . . . . . . . . . . . . . . . . . .96 Sealing sleeve 15.0 f. insulation up to 11cm . . . . . . 91
Plumbing strut 340 IB EF . . . . . . . . . . . . . 84, 424, 440
Plumbing strut 540 IB 84, 125, 157, 170, 178, 186, 199, Sealing sleeve 15.0 5cm . . . . . . . . . . . . . . . . . . . . . 90
211, 218, 229, 236, 244, 257, 285, 424, 440, 448,
S Sealing sleeve 20.0 . . . . . . . . . . . . . . . . . . . . . . . . . 94
522 Safety plate for brace stirrup 8 . . . . . . . . . . . 320, 389 Sealing string D2cm 350m . . . . . . . . . . . . . . . . . . . 108
Plumbing strut 540 IB EF . . . . . . . . . . . . . 84, 425, 440 Scaffold planking 30/100cm . . . . . . . . . . . . . 425, 441 Sealing tape KS 10x3mm 10m . . . . . . . . . . . . . . . 108
Positioning clamp M30 . . . . . . . . . . . . . . . . . . . . 91, 95 Scaffold planking 30/150cm . . . . . . . . . . . . . 425, 441 Sealing tape KS 20x5mm 10m . . . . . . . . . . . 108, 238
Positioning cone spanner 15.0 DK . . 93, 268, 396, 510 Scaffold planking 30/200cm . . . . . . . . . . . . . 425, 441 Secondary-beam stabiliser 1 . . . . . 330, 338, 349, 443
Positioning cone 15.0 5cm . . . . . . . . . . . . . . . . . . . . 90 Scaffold planking 30/250cm . . . . . . . . . . . . . 425, 441 Secondary-beam stabiliser 2 . . . . . 330, 338, 349, 443
Positioning disk M30 . . . . . . . . . . . . . . . . . . . . . 91, 95 Scaffold planking 30/300cm . . . . . . . . . . . . . 425, 441 Securing barrier XS . . . . . . . . . . . . . . . . . . . . . . . . 560
Positioning disk RD 28 . . . . . . . . . . . . . . . . . . . . . . . 91 Scaffold planking 60/100cm . . . . . . . . . 425, 441, 555 Set of ball-head hexagon-socket screw keys . . . . . 308
Positioning lever for shifting trolley DF . . . . . . . . . . 304 Scaffold planking 60/100cm with manhole . . 425, 441 Shaft corner waling WS10 Top50 .....m . . . . . . . . . 196
Positioning rail .....m . . . . . . . . . . . . . . . . 203, 221, 259 Scaffold planking 60/150cm . . . . . . . . . 425, 441, 555 Shaft waling squaring plate . . . . . . . . . . . . . . . . . . 197
Precast member head M . . . . . . . . . . . . . . . . . . . . 521 Scaffold planking 60/150cm with manhole . . 425, 441 She-bolt 15.0 5cm . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Pressure prop T . . . . . . . . . . . . . . . . . . . . . . . . . . . 470 Scaffold planking 60/175cm . . . . . . . . . 425, 441, 555 She-bolt 15.0 5cm 1.20m . . . . . . . . . . . . . . . . . . . . . 90
Pressure shoe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 Scaffold planking 60/175cm with manhole . . 425, 441 She-bolt 20.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Pressure shoe T7/T16 . . . . . . . . . . . . . . . . . . . . . . 270 Scaffold planking 60/200cm . . . . . . . . . 425, 441, 555 Shifting carriage TG . . . . . . . . . . . . . . . . . . . . . . . . 428
Pressure spindle MF240 . . . . . . . . . . . . . . . . . . . . 388 Scaffold planking 60/200cm with manhole . . 425, 441 Shifting trolley DF . . . . . . . . . . . . . . . . . . . . . . . . . . 304
Pressure strut MF long . . . . . . . . . . . . . . . . . . . . . . 388 Scaffold planking 60/250cm . . . . . . . . . 425, 441, 555 Shifting wheel KS . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Pressure strut MF short . . . . . . . . . . . . . . . . . . . . . 388 Scaffold planking 60/250cm with manhole . . 425, 441 Side handrail clamping unit T 126, 158, 172, 201, 219,
Pressure strut TLS 3.70m . . . . . . . . . . . . . . . . . . . 306 Scaffold planking 60/300cm . . . . . . . . . 425, 441, 555 509, 521
ProFrame panel 21mm 200/50cm . . 68, 330, 340, 350 Scaffold planking 60/300cm with manhole . . 425, 441 Side railing KS 0.30m . . . . . . . . . . . . . . . . . . . . . . 230
ProFrame panel 21mm 200/50cm BS 68, 330, 340, 350 Scaffold planking 60/60cm . . . . . . . . . . 425, 441, 555 Side toe-board Z 1.80m 128, 286, 295, 329, 340, 349,
ProFrame panel 21mm 250/50cm . . 68, 330, 340, 350 Scaffold tube connection 126, 139, 158, 172, 180, 187, 449
ProFrame panel 21mm 250/50cm BS 68, 330, 340, 350 201, 212, 219, 245, 251, 258, 396, 426, 484 Slinging plate T . . . . . . . . . . . . . . . . . . . . . . . . . . . 471
ProFrame panel 27mm 200/50cm . . 68, 330, 340, 350 Scaffold tube holder D34/48mm . . . . . . . . . . . . . . .535 Slot-screw screwdriver 0.6x3.5 . . . . . . . . . . . . . . . 308
ProFrame panel 27mm 200/50cm BS 68, 330, 340, 350 Scaffold tube holder D48mm . . . . . . . . . . . . . . . . . .442 Slot-screw screwdriver 1x5.5 . . . . . . . . . . . . . . . . . 308
ProFrame panel 27mm 250/50cm . . 68, 330, 340, 350 Scaffold tube 48.3mm 0.50m 126, 139, 158, 172, 179, Slugging ring spanner 70 . . . . . . . . . . . . . . . . . . . . . 96
ProFrame panel 27mm 250/50cm BS 68, 330, 340, 350 187, 201, 212, 219, 245, 251, 258, 267, 294, 320, Solid tire wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427
Prop head EB . 85, 125, 149, 157, 171, 179, 200, 211, 390, 394, 403, 426, 442, 447, 484, 509, 522, 535, Spindle connecting plate T . . . . . . . . . . . 427, 443, 484
218, 237, 245, 257, 285, 395, 448 555 Spindle for attachable frame F 2.40m . . . . . . . . . . 269
Prop head Eurex 60 Top50 . . . . . . 200, 218, 424, 440 Scaffold tube 48.3mm 1.00m 126, 139, 158, 172, 179, Spindle strut D15 3.00m . . . . . . . . . . . . . . . . . . . . 402
Prop head KS EB . . . . . . . . . . . . . . . . . . . . . . . 85, 229 187, 201, 212, 219, 245, 251, 258, 267, 294, 390, Spindle strut D22 3.00m . . . . . . . . . . . . . . . . . . . . 402
Prop head RD EB . . . . . . . . . . . . . . . . . . . . . . . 85, 187 394, 403, 426, 442, 447, 484, 509, 522, 535, 555 Spindle strut D22 4.00m . . . . . . . . . . . . . . . . . . . . 402
Prop shoe EB . . . . . . . . . . . . . . . . . . . . . . 85, 425, 441 Scaffold tube 48.3mm 1.50m 126, 139, 158, 172, 179, Spindle strut GS T5 65/101cm . . . . . . . . . . . . 202, 220
Prop spindle SL-1 . . . . . . . . . . . . . . . . . . . . . . . . . . 446 187, 201, 212, 219, 245, 251, 258, 267, 294, 390, Spindle strut GS T6 95/140cm . . . . . . . . 202, 220, 470
Protecting metal sheet TLS left . . . . . . . . . . . . . . . 305 394, 403, 426, 442, 447, 484, 509, 522, 535, 555 Spindle strut GS T7 109/166cm . . . . . . . . . . . . . . . 470
Protecting metal sheet TLS right . . . . . . . . . . . . . . 305 Spindle strut SL-1 T16 100/140cm . . . . . . . . . . . . 269
573
Spindle strut SL-1 T16 140/225cm . . . . . . . . . . . . . 269 Steel section WU14 f. supp. constr. frame . . . . . . .264 Telescopic shaft beam 2.00-2.70m . . . . . . . . . . . . 410
Spindle strut SL-1 T16 220/375cm . . . . . . . . . . . . . 269 Step bracket XP . . . . . . . . . . . . . . . . . . . . . . . . . . .534 Telescopic shaft beam 2.70-3.80m . . . . . . . . . . . . 410
Spindle strut T10 350/400cm . . . . . . . . . 202, 220, 269 Step-up rung Z . . . 128, 286, 295, 329, 340, 349, 449 Telescopic shaft beam 3.80-5.90m . . . . . . . . . . . . 410
Spindle strut T10 .....mm . . . . . . . . . . . . . . . . 202, 220 Stop anchor double-ended 15.0 20cm . . . . . . . . . . .92 Template f. circular formw. H20 ...../.....mm . . . . . . 186
Spindle strut T6 100/150cm . . 202, 220, 268, 448, 470 Stop anchor 15.0 11.5cm . . . . . . . . . . . . . . . . . . . . .91 Tension plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Spindle strut T6 73/110cm . . . . . . . 202, 220, 448, 470 Stop anchor 15.0 16cm . . . . . . . . . . . . . . . . . . . . . . .91 Tensioning instrument 300kN . . . . . . . . . . . . . . 92, 95
Spindle strut T7 100/150cm . . 202, 220, 268, 448, 470 Stop anchor 15.0 40cm . . . . . . . . . . . . . . . . . . . . . . .92 Testing truss for diagonal anchors 15.0/20.0 . . . . . 267
Spindle strut T7 150/200cm . . . . . . 202, 220, 448, 470 Stop anchor 20.0 11.5cm . . . . . . . . . . . . . . . . . . . . .95 Thickness gauge set 0.05-1.00mm . . . . . . . . . . . . 308
Spindle strut T7 200/250cm . . . . . . 202, 220, 268, 448 Stop anchor 20.0 17.5cm . . . . . . . . . . . . . . . . . . . . .95 Tie rod wrench 15.0/20.0 . . . . . . 93, 96, 410, 449, 521
Spindle strut T7 250/300cm . . . . . . 202, 220, 269, 448 Stop anchor 20.0 40cm . . . . . . . . . . . . . . . . . . . . . . .95 Tie rod wrench 20.0/26.5 . . . . . . . . . . . . . . . . . . . . . 97
Spindle strut T7 305/355cm . . . . . . 202, 220, 264, 448 Strip tensioner B 5.00m . . . . . 203, 221, 259, 285, 294 Tie rod 15.0mm galvanised 0.50m . . . . . . . . . . . . . . 90
Spindle strut T7 75/110cm . . . . . . . 202, 220, 448, 470 Strut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .508 Tie rod 15.0mm galvanised 0.75m . . . . . . . . . . . . . . 90
Spindle strut 12 3.00m . . . . . . . . . . . . . . . . . . . . . . 264 Strut connection SL-1 . . . . . . . . . . . . . . . . . . . . . . .447 Tie rod 15.0mm galvanised 1.00m . . . . . . . . . . 90, 256
Splice plate Top50 Z . . . . . . . . . . . . . . . . . . . . . . . 197 Strut for base profile TLS . . . . . . . . . . . . . . . . . . . .306 Tie rod 15.0mm galvanised 1.25m . . . . . . . . . . . . . . 90
Splice plate with join adjustment . . . . . . . . . . 169, 197 Strut head EB . . . . . . . . . . . . . . . . . . . . . 85, 138, 250 Tie rod 15.0mm galvanised 1.50m . . . . . . . . . . . . . . 90
Split nut B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422, 554 Strut shoe EB . . . . . . . . . . . . . 85, 211, 425, 441, 522 Tie rod 15.0mm galvanised 1.75m . . . . . . . . . . . . . . 90
Split nut SL-1 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . 447 Strut SL-1 0.156m . . . . . . . . . . . . . . . . . . . . . . . . . .446 Tie rod 15.0mm galvanised 2.00m . . . . . . . . . . . . . . 90
Spring cotter 5mm 170, 177, 198, 210, 217, 238, 256, Strut SL-1 0.312m . . . . . . . . . . . . . . . . . . . . . . . . . .446 Tie rod 15.0mm galvanised 2.50m . . . . . . . . . . . . . . 90
264, 265, 284, 292, 394, 427, 443, 447, 472 Strut SL-1 0.625m . . . . . . . . . . . . . . . . . . . . . . . . . .446 Tie rod 15.0mm galvanised .....m . . . . . . . . . . . . . . . 90
Spring locked connecting pin 16mm . . 284, 319, 328, Strut SL-1 1.25m . . . . . . . . . . . . . . . . . . . . . . . . . . .446 Tie rod 15.0mm non-treated 0.50m . . . . . . . . . . . . . 90
338, 348, 426, 442, 554 Strut SL-1 2.50m . . . . . . . . . . . . . . . . . . . . . . . . . . .446 Tie rod 15.0mm non-treated 0.75m . . . . . . . . . . . . . 90
Square nut 22 . . . . . . . . . . . . . . . . . . . . . 268, 396, 510 Super plate 15.0 . . . 90, 228, 238, 244, 250, 423, 439 Tie rod 15.0mm non-treated 1.00m . . . . . . . . . 90, 256
Square spanner 32.0 . . . . . . . . . . . . . . . . . . . . . . . . 97 Super plate 20.0 B . . . . . . . . . . . . . . . . . . . . . . . . . .94 Tie rod 15.0mm non-treated 1.25m . . . . . . . . . . . . . 90
Stabilising plate T . . . . . . . . . . . . . . . . . . . . . . . . . . 471 Support girder . . . . . . . . . . . . . . . . . . . . . . . . . . . . .508 Tie rod 15.0mm non-treated 1.50m . . . . . . . . . . . . . 90
Stacking angle FF20 . . . . . . . . . . . . . . . . . . . 170, 177 Support lengthening piece M . . . . . . . . . . . . . . . . .520 Tie rod 15.0mm non-treated 1.75m . . . . . . . . . . . . . 90
Stacking element FF20 0.50x0.50m 21mm . . . . . . 168 Supporting construction . . . . . . . . . . . . . . . . . . . . .140 Tie rod 15.0mm non-treated 2.00m . . . . . . . . . . . . . 90
Stacking element FF20 0.50x0.50m 27mm . . . . . . 168 Supporting construction distancer 20cm . . . . . . . . .265 Tie rod 15.0mm non-treated 2.50m . . . . . . . . . . . . . 90
Stacking element FF20 0.75x0.50m 21mm . . . . . . 168 Supporting construct. frame Universal F 4.50m . . .265 Tie rod 15.0mm non-treated 3.00m . . . . . . . . . . . . . 90
Stacking element FF20 0.75x0.50m 27mm . . . . . . 168 Supporting head H20 DF . . . 284, 293, 328, 338, 348 Tie rod 15.0mm non-treated 3.50m . . . . . . . . . . . . . 90
Stacking element FF20 1.00x0.50m 21mm . . . . . . 168 Supporting profile TLS 5.15m . . . . . . . . . . . . . . . . .306 Tie rod 15.0mm non-treated 4.00m . . . . . . . . . . . . . 90
Stacking element FF20 1.00x0.50m 27mm . . . . . . 168 Supporting shoe . . . . . . . . . . . . . . . . . . . . . . . . . . .264 Tie rod 15.0mm non-treated 5.00m . . . . . . . . . . . . . 90
Stacking element FF20 2.00x0.50m 21mm . . . . . . 168 Supporting shoe WU16 . . . . . . . . . . . . . . . . . . . . . .270 Tie rod 15.0mm non-treated 6.00m . . . . . . . . . . . . . 90
Stacking element FF20 2.00x0.50m 27mm . . . . . . 168 Support. construction frame "Variable" 3.30m . . . .264 Tie rod 15.0mm non-treated 7.50m . . . . . . . . . . . . . 90
Stacking frame DF . . . . . . . . . . . . . . . . . . . . . . . . . 304 Suspended platform 120 3.30m . . . . . . . . . . 394, 508 Tie rod 15.0mm non-treated .....m . . . . . . . . . . . . . . 90
Stacking plate F 2.40m . . . . . . . . . . . . . . . . . . . . . . 269 Suspended platform 120 4.30m . . . . . . . . . . 394, 508 Tie rod 20.0mm galvanised 0.50m . . . . . . . . . . . . . . 94
Stacking plate for circular formwork H20 . . . . . . . . 186 Suspension beam extension T 1.00m . . . . . . . . . . .471 Tie rod 20.0mm galvanised 0.75m . . . . . . . . . . . . . . 94
Stacking plate H20 . . . . . . . . . . . . . . . . . . . . . 198, 217 Suspension beam for forming wagon T . . . . . . . . .471 Tie rod 20.0mm galvanised 1.00m . . . . . . . . . . . . . . 94
Stacking screw KS . . . . . . . . . . . . . . . . . . . . . . . . . 228 Suspension beam K2 . . . . . . . . . . . . . . . . . . . . . . .509 Tie rod 20.0mm galvanised 1.25m . . . . . . . . . . . . . . 94
Stacking strap 50 . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Suspension beam M . . . . . . . . . . . . . . . . . . . . . . . .520 Tie rod 20.0mm galvanised 1.50m . . . . . . . . . . . . . . 94
Star grip nut 15.0 G . . . . . . . . . . . . . . . . . . . . 169, 177 Suspension cone 15.0 f. insulation up to 11cm . . . . .91 Tie rod 20.0mm galvanised 2.00m . . . . . . . . . . . . . . 94
Star screw . . . . . . . . . . . . . . . . . . . . . . . . . . . 395, 509 Suspension cone 15.0 with collar . . . . . . . . . . . . . . .92 Tie rod 20.0mm galvanised .....m . . . . . . . . . . . . . . . 94
Starter block unit D15 . . . . . . . . . . . . . . . . . . . . . . . 403 Suspension cone 15.0 5cm . . . . . . . . . . . . . . . . . . . .91 Tie rod 20.0mm non-treated 0.50m . . . . . . . . . . . . . 94
Starter block unit D22 . . . . . . . . . . . . . . . . . . . . . . . 403 Suspension head WS10 . . . . . . . . . . . . . . . . . . . . .203 Tie rod 20.0mm non-treated 0.75m . . . . . . . . . . . . . 94
Starter block unit MF . . . . . . . . . . . . . . . . . . . . . . . 389 Suspension loop ES . . . . . . . . . . . . . . . . . . . 510, 521 Tie rod 20.0mm non-treated 1.00m . . . . . . . . . . . . . 94
Staxo front railing . . . . . . . . . . . . . . . . . . . . . . 425, 442 Suspension plate AK . . . . . . . . . . . . . . . . . . . . . . . .510 Tie rod 20.0mm non-treated 1.50m . . . . . . . . . . . . . 94
Staxo side railing 100 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension plate ES . . . . . . . . . . . . . . . . . . . 510, 521 Tie rod 20.0mm non-treated 2.00m . . . . . . . . . . . . . 94
Staxo side railing 150 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension profile AK . . . . . . . . . . . . . . . . . . . . . . .510 Tie rod 20.0mm non-treated .....m . . . . . . . . . . . . . . 94
Staxo side railing 175 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension profile D15/D22 . . . . . . . . . . . . . . . . . .403 Tie rod 26.5mm non-treated .....m . . . . . . . . . . . . . . 96
Staxo side railing 200 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension profile ES . . . . . . . . . . . . . . . . . . 510, 521 Tie rod 32.0mm non-treated .....m . . . . . . . . . . . . . . 97
Staxo side railing 250 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension profile MF . . . . . . . . . . . . . . . . . . . . . .389 Tie-off connector type A . . . . . . . . . 173, 180, 213, 222
Staxo side railing 300 . . . . . . . . . . . . . . . . . . . 426, 442 Suspension shoe A . . . . . . . . . . . . . . . . . . . . . . . . .510 Timber varnish yellow 5l . . . . . . . . . . . . . . . . . . . . . 65
Staxo wedge support WS10 . . . . . . . . . . . . . . 423, 439 Suspension shoe M . . . . . . . . . . . . . . . . . . . . . . . . .521 Timber-beam formwork adapter XP . . . . . . . . . . . . 535
Staxo wedge support WU12/14 . . . . . . . . . . . 423, 439 Switch box TLS ground control . . . . . . . . . . . . . . . .307 Toeboard holder T 1.80m 172, 201, 220, 270, 285, 293,
Staxo 100 attaching cable 40cm . . . . . . . . . . . . . . 427 Switch box TLS landing level safety gate . . . . . . . .307 339, 426, 485
Staxo 100 frame 0.90m . . . . . . . . . . . . . . . . . . . . . 422 Swivel bearing plate D15 . . . . . . . . . . . . . . . . . . . .402 Toeboard holder XP 0.60m . . . . . . . . . . . . . . . . . . 534
Staxo 100 frame 1.20m . . . . . . . . . . . . . . . . . 422, 554 Swivel bearing plate D15 S . . . . . . . . . . . . . . . . . . .403 Toeboard holder XP 1.20m . . . . . . . . . . . . . . 443, 534
Staxo 100 frame 1.80m . . . . . . . . . . . . . . . . . . . . . 422 Swivel bearing plate D22 . . . . . . . . . . . . . . . . . . . .403 Tool box GF . . . . . . 203, 213, 221, 258, 390, 404, 410
Staxo 100 hoisting cable 40kg 30m . . . . . . . . . . . . 427 Swivel bearing plate D22 S . . . . . . . . . . . . . . . . . . .403 Tool box SL-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449
Staxo 100 mounting gallows 40kg . . . . . . . . . . . . . 427 Swivel bearing plate for screw jack U-head . 423, 439 Tool box TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Staxo 100 planking strut 1.00m . . . . . . . . . . . . . . . 425 Swivel coupler 48mm . . 212, 219, 267, 390, 394, 404, Top scaffold bracket L . 171, 187, 200, 212, 219, 258,
Staxo 100 planking strut 1.50m . . . . . . . . . . . . . . . 425 426, 442, 447, 509, 522, 555 395
Staxo 100 single leg 0.90m . . . . . . . . . . . . . . . . . . 423 Swivel coupler 48mm Eurex 60 . . . . . . . . . . . . . . . .424 Top100 tec adjustable waling extension . . . . 177, 216
Staxo 100 single leg 1.20m . . . . . . . . . . . . . . . . . . 423 Swivel joint plate . . . . . . . . . . . . . . . . . . . . . . . . . . .198 Top100 tec anchoring plate . . . . . . . . . . . . . . 177, 217
Staxo 100 single leg 1.80m . . . . . . . . . . . . . . . . . . 423 Swivel plate MF . . . . . . . . . . . . . . . . . . . 267, 389, 403 Top100 tec angle tie bracket WU14 . . . . . . . . . . . . 217
Staxo 100 toeboard . . . . . . . . . . . . . . . . . . . . . . . . 425 Swivelling inside corner FF20 0.50m 21mm . . . . . .168 Top100 tec assembly angle . . . . . . . . . . . . . . 178, 221
Staxo 40 anti-dropout lock . . . . . . . . . . . . . . . . . . . 439 Swivelling inside corner FF20 0.50m 27mm . . . . . .168 Top100 tec corner profile 1.15m . . . . . . . . . . . . . . 216
Staxo 40 bracket 90cm . . . . . . . . . . . . . . . . . . . . . . 441 Swivelling inside corner FF20 1.00m 21mm . . . . . .168 Top100 tec corner profile 2.90m . . . . . . . . . . . . . . 216
Staxo 40 coupler . . . . . . . . . . . . . . . . . . . . . . . . . . 438 Swivelling inside corner FF20 1.00m 27mm . . . . . .168 Top100 tec corner profile 3.50m . . . . . . . . . . . . . . 216
Staxo 40 frame strut 1.40m . . . . . . . . . . . . . . . . . . 441 Swivelling inside corner FF20 2.75m 21mm . . . . . .168 Top100 tec form-tie nut 20.0 . . . . . . . . . . . . . . . . . . 94
Staxo 40 frame 0.90m . . . . . . . . . . . . . . . . . . . . . . 438 Swivelling inside corner FF20 2.75m 27mm . . . . . .168 Top100 tec formwork element connector . . . . 177, 216
Staxo 40 frame 1.20m . . . . . . . . . . . . . . . . . . . . . . 438 Swivelling outside corner FF20 0.50m . . . . . . . . . .169 Top100 tec hole gauge . . . . . . . . . . . . . . . . . . . . . 221
Staxo 40 frame 1.80m . . . . . . . . . . . . . . . . . . . . . . 438 Swivelling outside corner FF20 1.00m 21mm . . . . .168 Top100 tec inside corner waling . . . . . . . . . . . . . . 216
Staxo 40 ladder 2.30m . . . . . . . . . . . . . . . . . . . . . . 442 Swivelling outside corner FF20 1.00m 27mm . . . . .169 Top100 tec internal angle plate . . . . . . . . . . . 177, 217
Staxo 40 lifting strut . . . . . . . . . . . . . . . . . . . . . . . . 443 Swivelling outside corner FF20 2.75m 21mm . . . . .168 Top100 tec outside corner waling . . . . . . . . . . . . . 216
Staxo 40 pallet 1.20/0.90m . . . . . . . . . . . . . . . . . . . 101 Swivelling outside corner FF20 2.75m 27mm . . . . .169 Top100 tec ply joint adjuster . . . . . . . . . . . . . . . . . 217
Staxo 40 pallet 1.80m . . . . . . . . . . . . . . . . . . . . . . . 101 System beam SL-1 0.75m . . . . . . . . . . . . . . . . . . . .446 Top100 tec transition plate 21mm . . . . . . . . . . . . . 217
Staxo 40 planking strut 1.00m . . . . . . . . . . . . . . . . 441 System beam SL-1 1.00m . . . . . . . . . . . . . . . . . . . .446 Top100 tec transport protection shoe . . . . . . . . . . 216
Staxo 40 planking strut 1.50m . . . . . . . . . . . . . . . . 441 System beam SL-1 3.00m . . . . . . . . . . . . . . . . . . . .446 Top100 tec waling WU14 0.50m . . . . . . . . . . 178, 216
Staxo 40 planking strut 2.00m . . . . . . . . . . . . . . . . 441 System beam SL-1 4.00m . . . . . . . . . . . . . . . . . . . .446 Top100 tec waling WU14 0.75m . . . . . . . . . . 178, 216
Staxo 40 plumbing strut adapter . . . . . . . . . . . . . . 441 System beam SL-1 5.00m . . . . . . . . . . . . . . . . . . . .446 Top100 tec waling WU14 1.00m . . . . . . . . . . 178, 216
Staxo 40 screw jack foot 30cm . . . . . . . . . . . . . . . . 439 System ladder XS 4.40m . . . . . . . . . . . . . . . . . . . .560 Top100 tec waling WU14 1.25m . . . . . . . . . . 178, 216
Staxo 40 screw jack foot 70cm . . . . . . . . . . . . . . . . 439 Top100 tec waling WU14 1.50m . . . . . . . . . . 178, 216
Staxo 40 screw jack U-head 30cm . . . . . . . . . . . . . 438 T Top100 tec waling WU14 1.75m . . . . . . . . . . 178, 216
Staxo 40 screw jack U-head 70cm . . . . . . . . . . . . . 439 T ledge 21/42 2.00m . . . . . . . . . . . 199, 217, 284, 294 Top100 tec waling WU14 2.00m . . . . . . . . . . 178, 216
Staxo 40 shifting wheel . . . . . . . . . . . . . . . . . . . . . 443 T plate for supporting construction frame . . . . . . . .270 Top100 tec waling WU14 2.25m . . . . . . . . . . 178, 216
Staxo 40 tube connector D48.3mm . . . . . . . . . . . . 438 Table head 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292 Top100 tec waling WU14 2.50m . . . . . . . . . . 178, 216
Staxo 40 4-way screw-jack head 30cm . . . . . . . . . 438 Table head 30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292 Top100 tec waling WU14 2.75m . . . . . . . . . . 178, 216
Staxo 40 4-way screw-jack head 70cm . . . . . . . . . 438 Telescopic shaft beam 1.45-1.65m . . . . . . . . . . . . .410 Top100 tec waling WU14 3.00m . . . . . . . . . . 178, 216
Staxo/d2 adapter frame . . . . . . . . . . . . . . . . . . . . . 427 Telescopic shaft beam 1.65-2.00m . . . . . . . . . . . . .410 Top100 tec waling WU14 3.50m . . . . . . . . . . 178, 216
574
Top100 tec waling WU14 4.00m . . . . . . . . . . 178, 216 Warning sign "No entry" 300x300mm . . 390, 396, 404,
Top100 tec waling WU14 4.50m . . . . . . . . . . 178, 216 555
Top100 tec waling WU14 5.00m . . . . . . . . . . 178, 216 Water pump nut pliers 250mm . . . . . . . . . . . . . . . .308
Top100 tec waling WU14 5.50m . . . . . . . . . . 178, 216 Water stop connector 15.0 . . . . . . . . . . . . . . . . . . . .92
Top100 tec waling WU14 6.00m . . . . . . . . . . 178, 216 Water stop connector 20.0 . . . . . . . . . . . . . . . . . . . .94
Top50 adapter for Framax pouring platform U 172, 201 Water stop G 15.0 33cm . . . . . . . . . . . . . . . . . . . . . .92
Top50 form-tie nut 15.0 . . . . . . . . . . . . . . . . . . . . . . 90 Water stop S 15.0 33cm . . . . . . . . . . . . . . . . . . . . . .92
Torque wrench 3/4" 75-400Nm . . . . . . . . . . . . . . . 308 Water stop 15.0 33cm . . . . . . . . . . . . . . . . . . . . . . . .92
Transition piece A 1/2"x3/4" . . . . . . . . . . 390, 404, 449 Water stop 20.0 33cm . . . . . . . . . . . . . . . . . . . . . . . .94
Transition plate 18mm . . . . . . . . . . . . . . . . . . . . . . 198 Wedge for screw jack ..... % . . . . . . . . . . . . . 423, 439
Transition plate 21mm . . . . . . . . . . . . . . . . . . . . . . 198 Weldable coupler 15.0 . . . . . . . . . . . . . . . . . . . . . . .92
Transition swivel coupler 48/76mm . . . . . . . . 426, 555 Weldable coupler 15.0 for sheet wall . . . . . . . . . . . .92
Transport fork DF 1t 0.90m . . . . . . . . . . . . . . . . . . 305 Weldable coupler 20.0 . . . . . . . . . . . . . . . . . . . . . . .95
Transport fork DF 1t 1.30m . . . . . . . . . . . . . . . . . . 305 Weld-on connecting piece XP . . . . . . . . . . . . . . . . .535
Transport fork DF 1t 2.00m . . . . . . . . . . . . . . . . . . 305 Wheel connector F 2.00m front . . . . . . . . . . . . . . . .266
Transport fork DF 1.5t 0.90m . . . . . . . . . . . . . . . . . 305 Wheel connector F 2.00m rear . . . . . . . . . . . . . . . .267
Transport fork DF 1.5t 1.30m . . . . . . . . . . . . . . . . . 305 Wheel connector F 2.40m . . . . . . . . . . . . . . . . . . . .270
Transport fork DF 1.5t 2.00m . . . . . . . . . . . . . . . . . 305 Wheel-around scaffold DF . . 128, 140, 160, 286, 294,
Transport fork DM 1.5t adjustable . . . . . . . . . . . . . 304 320, 329, 339, 349
Travelling gear distancer SL-1 330mm . . . . . . . . . 446 Winch with transport device . . . . . . . . . . . . . . . . . .266
Travelling gear MF . . . . . . . . . . . . . . . . . . . . . . . . . 388 Winch 125 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427
Travelling profile bracket F 2.40m . . . . . . . . . . . . . 270 Winch 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .427
Travelling profile D22 . . . . . . . . . . . . . . . . . . . . . . . 403 Wind bracing MF 6.00m . . . . . . . . . . . . . . . . . . . . .389
Travelling profile F 2.00m front . . . . . . . . . . . . . . . . 266 Wind bracing MF/150F/K 6.00m . . . . . . . . . . 389, 395
Travelling profile F 2.00m rear . . . . . . . . . . . . . . . . 267 Wing nut 15.0 . . . . . . . . . . . . . . . . . 90, 256, 422, 439
Triangular bracket Z 128, 286, 295, 329, 340, 349, 449 Wing nut 20.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Wooden pallet 0.80x1.60m (DB, HT) . . . . . . . . . . .101
U Wooden pallet 1.22x1.60m (DB, HT) . . . . . . . . . . .101
U-head D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Wrench for circular formwork H20 . . . . . . . . . . . . . .186
U-head Eurex 60 . . . . . . . . . . . . . . . . . . . . . . . . . . 424
U-head 12.5cm . . . . . . . . . . . . . . . . . . . . . . . . 328, 348 X
Universal angle tie bracket . . . . . . . 169, 198, 210, 256 Xlife edge varnish 2.5l . . . . . . . . . . . . . . . . . . . . . . . .72
Universal bracket 60 . . . . . . . . 171, 200, 212, 219, 258 Xlife panel KS 0.90m . . . . . . . . . . . . . . . . . . . . . . . .228
Universal bracket 90 171, 179, 187, 200, 212, 219, 258, Xlife panel KS 1.20m . . . . . . . . . . . . . . . . . . . . . . . .228
395 Xlife panel KS 2.70m . . . . . . . . . . . . . . . . . . . . . . . .228
Universal climbing cone 15.0 . . . . . . . . . . . . . . . . . . 91 Xlife panel KS 3.30m . . . . . . . . . . . . . . . . . . . . . . . .228
Universal climbing cone 20.0 . . . . . . . . . . . . . . . . . . 94 Xlife priming varnish SW-910 2.5l . . . . . . . . . . . . . . .72
Universal climbing cone 26.5 . . . . . . . . . . . . . . . . . . 96 Xlife sheet 21mm 265/145cm . . . . . . . . . . . . . . . . . .72
Universal cone spanner 15.0/20.0 . . 93, 96, 308, 390, Xlife sheet 21mm 325/145cm . . . . . . . . . . . . . . . . . .72
404 Xsafe platform extension 0.55m . . . . . . . . . . . . . . .148
Universal cone 22mm . . . . . . . . . . . . . . . . . . . . . . . . 93 Xsafe plus column adapter . . . . . . . . . . . . . . . . . . .499
Universal cone 26mm . . . . . . . . . . . . . . . . . . . . . . . . 95 Xsafe plus column formwork FX lifting bracket . . . .499
Universal cone 32mm . . . . . . . . . . . . . . . . . . . . . . . . 96 Xsafe plus counter railing 1.00m . . . . . . . . . . . . . . .499
Universal dismantling tool . . 125, 138, 157, 171, 179, Xsafe plus counter railing 1.35m . . . . . . . . . . . . . . .499
187, 200, 212, 229, 237, 245, 250, 257, 285, 294, Xsafe plus counter railing 2.00m . . . . . . . . . . . . . . .499
329, 340, 349, 395, 425, 441, 554 Xsafe plus counter railing 2.40m . . . . . . . . . . . . . . .499
Universal end-shutter support 30cm . . 283, 293, 329, Xsafe plus counter railing 2.50m . . . . . . . . . . . . . . .499
338, 349 Xsafe plus counter railing 2.70m . . . . . . . . . . . . . . .499
Universal handrail extension M . . . . . . . . . . . . . . . 520 Xsafe plus fixing plate . . . . . . . . . . . . . . . . . . . . . . .500
Universal joint coupling 203, 213, 221, 258, 268, 390, Xsafe plus handrail extension . . . . . . . . . . . . . . . . .499
396, 404, 410, 510 Xsafe plus ladder extension 1.15m . . . . . . . . . . . . .500
Universal plug R20/25 . 128, 160, 177, 246, 283, 293, Xsafe plus ladder starter piece . . . . . . . . . . . . . . . .500
329, 339, 349, 427, 443 Xsafe plus ladder support . . . . . . . . . . . . . . . . . . . .500
Universal railing shackle 172, 179, 201, 212, 219, 258, Xsafe plus lifting adapter for beam formwork . . . . .500
389, 395, 509 Xsafe plus lifting adapter Framax . . . . . . . . . . . . . .500
Universal spindle foot T8 . . . . . . . . . . . . . . . . . . . . 202 Xsafe plus lifting waler . . . . . . . . . . . . . . . . . . . . . .500
Universal strut T5/5 .....mm . . . . . . . . . . . . . . 202, 220 Xsafe plus platform extension 0.60m . . . . . . . . . . .498
Universal support Top50 .....mm . . . . . . . . . . . . . . 203 Xsafe plus platform transition . . . . . . . . . . . . . . . . .499
Universal tool box 15.0 . . . . . . . . . . . . . . 268, 396, 510 Xsafe plus platform waling 1.50m . . . . . . . . . . . . . .499
Xsafe plus platform 1.00m . . . . . . . . . . . . . . . . . . .498
V Xsafe plus platform 1.35m . . . . . . . . . . . . . . . . . . .498
Velcro fastening 30x380mm . . . . . . . . . . . . . . . . . . 535 Xsafe plus platform 1.35m with side railing . . . . . . .498
Vertical extension DM 1.5t 3.30m . . . . . . . . . . . . . 304 Xsafe plus platform 2.00m . . . . . . . . . . . . . . . . . . .498
Vertical extension rail T . . . . . . . . . . . . . . . . . . . . . 472 Xsafe plus platform 2.40m . . . . . . . . . . . . . . . . . . .498
Vertical frame for forming wagon T . . . . . . . . . . . . 470 Xsafe plus platform 2.40m with side railing . . . . . . .498
Vertical profile MF160 . . . . . . . . . . . . . . . . . . . . . . 388 Xsafe plus platform 2.50m . . . . . . . . . . . . . . . . . . .498
Vertical profile MF80 . . . . . . . . . . . . . . . . . . . . . . . 388 Xsafe plus platform 2.50m with side railing . . . . . . .498
Vertical waling D15 3.00m U120 . . . . . . . . . . . . . . 402 Xsafe plus platform 2.70m . . . . . . . . . . . . . . . . . . .498
Vertical waling D15 3.50m U140 . . . . . . . . . . . . . . 402 Xsafe plus platform 2.70m with side railing . . . . . . .498
Vertical waling D22 3.00m U160 . . . . . . . . . . . . . . 402 Xsafe plus railing-closure post . . . . . . . . . . . . . . . .498
Vertical waling D22 4.00m U160 . . . . . . . . . . . . . . 402 Xsafe plus side railing . . . . . . . . . . . . . . . . . . . . . . .498
Vertical waling extension MF . . . . . . . . . . . . . . . . . 389 Xsafe plus stacking waler extension 0.70m . . . . . .499
Vertical waling MF 3.00m . . . . . . . . . . . . . . . . . . . . 388 Xsafe plus stacking waler extension 1.20m . . . . . .499
Vertical waling MF 4.50m . . . . . . . . . . . . . . . . . . . . 389 Xsafe plus stacking waler extension 1.80m . . . . . .499
Xsafe plus stacking waler 2.10m . . . . . . . . . . . . . . .499
Xsafe plus supporting strut EB . . . . . . . . . . . . 85, 499
W Xsafe plus swivel plate . . . . . . . . . . . . . . . . . . . . . .500
Waling clamp H20 . . . . . . . . . . . . . . . . . 178, 196, 216 Xsafe plus telescopic ladder . . . . . . . . . . . . . . . . . .500
Waling connecting plate T . . . . . . . . . . . . . . . . . . . 484 Xsafe plus waling connector . . . . . . . . . . . . . . . . . .499
Waling connector SL-1 WU16 0.75m . . . . . . . 198, 270
Waling WU14 for supporting construction frame . . 264
Waling-to-bracket holder . . . . . . . . . . . . 266, 389, 395
Z
Waling-to-bracket holder D22 . . . . . . . . . . . . . . . . . 403 Zinc plug 15.0 . . . . . . . . . . . . . . . . . . . . . . . . . 91, 485
Waling-to-bracket holder 9-15cm . . . . . . 266, 389, 395
Waling-to-bracket holder 9-24cm . . . . . . . . . . . . . . 403 0-9
Wall anchor M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521 4-way head Eurex 60 . . . . . . . . . . . . . . . . . . . . . . .424
Wall anchor 15.0 15cm . . . . . . . . . . . . . . . . . . . . . . . 92 4-way head H20 . . . . . . . . . . . . . . . . . . 328, 348, 439
Wall clamp XP 15cm . . . . . . . . . . . . . . . . . . . . . . . 535 4-way screw-jack head . . . . . . . . . . . . . . . . . . . . . .422
575
Art. no. 931108202 // 04/2013 en-GB,EU