Beruflich Dokumente
Kultur Dokumente
0020 X Material Test Reports Certified by approved independent testing agency. Shall be
rated and marked in accordance with ASTM D3350 or ISO
4427-07
0020
0010
***X
In process inspection & test requirement
Density
Specification Details / Notes:
ASTM D3350/D1505 or ISO 4427-07
0050 X Slow Crack Growth Resistance. ASTM D3350/D1693 and F1473 or ISO 4427-07
0110 X Elevated Temperature Sustained Pressure ASTM F714, or ISO 4427-07, under 80 #C conditions
IR018000 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 03/04/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR018000 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0130 X Work Man Ship: Visual Inspection ASTM F714
0030
0010
*** X
Final inspection & test requirements
Dimensions and surface finish: Ovality, wall thickness, length, toe
Specification Details / Notes:
ASTM F714 or ISO 4427-07
in, Diameter, eccentricity.
0060 X Special Fabrications (Spools) Shall have a tolerance of + 6 mm, unless otherwise defined in
Purchase Order.
0070 X Flange Bolt Hole Sizing Shall comply with ASME B16.5 up to 600 mm NPS and AWWA
C207 or MSS SP-44 for larger than 600 mm NPS
0080 X Marking & Identification Tagging Shall be permanent, ASTM F714 or ISO 4427-07
0040
0010
*** X
Additional/Supplemental Requirements
Potable Water Certification (Note 2)
Specification Details / Notes:
To provide valid NSF certification and listing on NSF Standard
No.14 and 61
Notes:(1)May only be waived by the responsible Saudi Aramco, ASC, AOC Inspection Offices after obtaining concurrence from RSA.
(2)SAP notification shall send a reminder to vendor to renew NSF certification and listing prior expiration not less than three(3)months.
End of IR018000