Beruflich Dokumente
Kultur Dokumente
Modul 1
1 What can be found at the enterprise edge?
Internet, VPN, and WAN modules****
3 A business consultant must use Internet websites to research a report on the e-business
strategies of
several firms and then electronically deliver the report to a group of clients in cities throughout the
world. Which two teleworker tools can the consultant use to accomplish this project? (Choose
two.)
VoIP
VPN
HTTP****
Telnet
email****
4 Which two measures help ensure that a hardware problem does not cause an outage in an
enterprise
LAN that supports mission critical services? (Choose two.)
providing failover capability****
installing redundant power supplies****
7 A remote user needs to access a networking device on the internal network of the company.
The transactions between the remote user and the device must be secure. Which protocol
enables this to happen securely?
HTTP
SSH****
Telnet
FTP
8 What does VoIP provide to telecommuters?
high-quality, live-video presentations
real-time voice communications over the Internet****
ability to share desktop applications simultaneously
secure, encrypted data transmissions through the Internet
9 Which functional component of the Cisco Enterprise Architecture is responsible for hosting
internal
servers?
enterprise campus****
enterprise edge
service provider edge
building distribution
10 What is the purpose of the Cisco Enterprise Architecture?
remove the three-layer hierarchical model and use a flat network approach
divide the network into functional components while still maintaining the concept of Core,
Distribution, and Access Layers****
provide services and functionality to the core layer by grouping various components into a single
component located in the access layer
reduce overall network traffic by grouping server farms, the management server, corporate
intranet, and
e-commerce routers in the same layer
11 Which two solutions would an enterprise IT department use to facilitate secure intranet access
for
remote workers? (Choose two.)
VPN****
NAT
user authentication****
client firewall software
packet sniffing
12 Which statement describes the difference between an enterprise WAN and an enterprise
extranet? An enterprise WAN is designed to interconnect local LANs, while an enterprise extranet
is designed to interconnect remote branch offices.
An enterprise WAN is designed to interconnect branch offices, while an enterprise extranet is
designed to give access to external business partners.****
An enterprise WAN is designed to provide remote access for its teleworkers, while an enterprise
extranet is designed to provide Internet connectivity for the enterprise.
An enterprise WAN is designed to provide Internet connectivity for the enterprise, while an
enterprise
extranet is designed to provide remote access to the enterprise network for teleworkers.
13 Why would a network administrator want to limit the size of failure domains when designing a
network?
reduces the effect of Ethernet collisions
reduces the impact of a key device or service failure****
reduces the impact of Internet congestion on critical traffic
reduces the impact of blocking broadcast packets at the edge of the local network
14 What is the main purpose of the Access Layer in a hierarchically designed network?
d 255.255.255.0
e 255.255.255.128
f 255.255.255.192
12 Host A in the exhibit is assigned the IP address 10.118.197.55/20. How many more network
devices
can be added to this same subnetwork?
a 253
b 509
c 1021
d 2045
e 4093*****
13 Refer to the exhibit. RIP version 2 is configured as the network routing protocol and all of the
default parameters remain the same. Which update is sent from R2 to R3 about the 10.16.1.0/24
network connected to R1?
a 10.16.0.0/16*****
b 10.0.0.0/24
c 10.0.0.0/8
d 10.16.1.0/24
14 What range of networks are summarized by the address and mask, 192.168.32.0/19?
a 192.168.0.0/24 - 192.168.32.0/24
b 192.168.0.0/24 - 192.168.31.0/24
c 192.168.32.0/24 – 192.168.64.0/24
d 192.168.32.0/24 – 192.168.63.0/24*****
15 Refer to the exhibit. Based on the output of the show ip nat translations command, which kind
of
address translation is in effect on this router?
a static
b public
c overload*****
d private
16 How many addresses will be available for dynamic NAT translation when a router is
configured
with the following commands?
Router(config)#ip nat pool TAME 209.165.201.23 209.165.201.30 netmask 255.255.255.224
Router(config)#ip nat inside source list 9 pool TAME
a7
b 8*****
c9
d 10
e 24
f 31
17 Refer to the exhibit. Which two IP addresses could be assigned to the hosts that are shown in
the
exhibit? (Choose two.)
a 192.168.65.31
b 192.168.65.32
c 192.168.65.35*****
d 192.168.65.60*****
e 192.168.65.63
f 192.168.65.64
18 What are the network and broadcast addresses for host 192.168.100.130/27? (Choose two.)
a network 192.168.100.0
b network 192.168.100.128*****
c network 192.168.100.130
d broadcast 192.168.100.157
e broadcast 192.168.100.159*****
f broadcast 192.168.100.255
19 Refer to the exhibit. Which two are valid VLSM network addresses for the serial link between
Router1 and Router2? (Choose two.)
a 192.168.1.4/30*****
b 192.168.1.8/30*****
c 192.168.1.90/30
d 192.168.1.101/30
e 192.168.1.190/30
20 When configuring NAT on a Cisco router, what is the inside local IP address?
a the IP address of an inside host as it appears to the outside network*****
a DUAL
b IP
c PDM
d RTP****
e TCP
f UDP
3 A network administrator issues the command show ip route and sees this line of output:
192.168.3.0/24 [120/2] via 192.168.2.2, 00:00:05, Serial0/0
What two pieces of information can be obtained from the output? (Choose two.)
a RIP is the routing protocol configured.****
b This is a static route to network 192.168.3.0.****
4 Refer to the exhibit. A network administrator is troubleshooting a routing problem. When the
show ip route command is entered on RTR-1, only the serial link between RTR-2 and RTR-3 has
been learned from the RIP routing protocol. What are two issues? (Choose two.)
a RIPv1 is a classful routing protocol.****
a Routing updates will arrive too quickly for receiving routers to process.
b The port IP address will be rejected by the routing protocol.
c Suboptimal paths will be selected.
d The port protocol will return to the HDLC default.
e VLSM support will be disabled.****
f Network convergence may be affected.*****
6 What two statements are correct regarding EIGRP authentication? (Choose two.)
a EIGRP authentication uses the MD5 algorithm.****
b EIGRP authentication uses a pre-shared key.****
c EIGRP authentication requires that both routers have the same key chain name.
d EIGRP authentication uses varying levels of WEP to encrypt data exchanged between routers.
e EIGRP authentication can be configured on one router and updates from this router are
protected;
whereas a neighbor router can be without the authentication configuration and its updates are
unprotected.
7 Refer to the exhibit. Which statement is true about the EIGRP authentication configuration?
a RTA and RTB will accept updates from each other.
b RTA and RTB will not accept updates from each other because key 1 on RTB does not match
RTA.
*****
c RTA and RTB will not accept updates from each other because the key chain names do not
match.
d The ip authentication mode AS does not match the locally configured AS.
8 Refer to the exhibit. Routers A and B have EIGRP configured and automatic summarization has
been
disabled on both routers. Which router command will summarize the attached routes?
a ip area-range eigrp 1 192.168.10.80 255.255.255.224
b ip summary-address eigrp 1 192.168.10.64 255.255.255.192****
11 Refer to the exhibit. Routers RTR-1 and RTR-3 are completely configured. The administrator
needs
to configure the routing protocol on router RTR-2 so that communication occurs throughout the
network. Which group of commands will successfully configure EIGRP on RTR-2?
a RTR-2(config)# router eigrp 1*****
RTR-2(config-router)# network 198.18.76.0
a The route has the highest path cost of all routes to that destination network.
b The route must be confirmed by neighboring routers before it is put in the active state.
c The route is a feasible successor and will be used if the active route fails.
d There is no activity on the route to that network.
e The route is viable and can be used to forward traffic.*****
13 What two statements are true regarding EIGRP tables? (Choose two.)
a A feasible successor route can be found in the topology table.****
b A successor route can only be found in the routing table.
c The topology table shows whether a route is in the passive or active state.****
d The routing table shows the amount of time elapsed since a router adjacency was formed.
e The neighbor table shows all adjacent Cisco devices.
f Administrative distance is shown as a column in the neighbor table.
14 What prevents RIPv1 updates from being correctly advertised?
a an increase in network load
b the use of variable length subnet masks****