Beruflich Dokumente
Kultur Dokumente
1. Start the SolidWorks Installation manager, from your SolidWorks media or download location.
2. On the Welcome screen choose the “Server Products” option then “Install SolidNetWork License
Manager” as shown below and click next.
3. Enter your SolidWorks Network License Serial Number, choose an installation location and click next.
www.solidapps.co.uk
Tel: +44 (0) 121 544 1400 | Fax: +44 (0) 121 544 1600
SOLID Applications Limited | Old Market Place | Market Street | Oldbury | West Midlands | B69 4DH | United Kingdom
SOLID Applications Ltd
4. On the following summary screen, confirm the details and click “Install Now”.
www.solidapps.co.uk Page 2 of 8
SOLID Applications Ltd
Make a note of the server name and port number used here, you will need this information when installing
SolidWorks on the client machines.
8. There are three things to configure to avoid firewall issues when using the SolidNetWork License
Manager:
a. Add TCP/IP ports 25734 and 25735 to the firewall exception list.
b. Check "A firewall is in use on this server" and leave the ports number by default in the
SolidNetWork License Manager options.
c. Add the following programs to the firewall exception list (lmgrd.exe and sw_d.exe that are stored
in the SNL installation folder).
www.solidapps.co.uk Page 3 of 8
SOLID Applications Ltd
9. On the following screen, enter your email address and choose the option to “Activate over the internet”.
10. The following dialog appears while the installation communicates with the SolidWorks Activation Server.
www.solidapps.co.uk Page 4 of 8
SOLID Applications Ltd
13. When the SolidNetWork License Manager window appears, just click OK to close and proceed with
installing the client software.
www.solidapps.co.uk Page 5 of 8
SOLID Applications Ltd
1. Start the SolidWorks Installation manager, from your SolidWorks media or download location.
2. On the Welcome screen, click “Individual (on this computer)”, as shown below and click Next.
3. On the next screen enter your SolidWorks Serial Number and click Next.
www.solidapps.co.uk Page 6 of 8
SOLID Applications Ltd
4. The following screen will detail the installation requirements. Clicking any of the “Change” links, will give
the options to change details such as the installation location.
If all the details are ok, click “Install Now”.
5. In the next dialog box, enter the port number and server name used when the License Manager was
installed.
www.solidapps.co.uk Page 7 of 8
SOLID Applications Ltd
6. Complete the SolidWorks installation by following the SolidWorks Installation Manager instructions.
7. You should now be able to run SolidWorks and continue installing on any other client machines.
www.solidapps.co.uk Page 8 of 8