Beruflich Dokumente
Kultur Dokumente
Industrial process
filter cartridges
Wide range of filter
cartridges offer complete
filtration solutions for
industrial processes
Cartridge filters can be the logical choice for a
variety of applications. Eaton provides high quality
depth, pleated and membrane filter cartridges
with retention ratings ranging from 0.05 μm and
150 μm with outstanding dirt-holding capacity.
In addition to sizes ranging from 5” (12.7 cm) to
50” (127 cm) and various adapter codes, Eaton
offers cartridges with different filter materials such
as polypropylene, nylon, PTFE and more.
Eaton’s industrial process filter cartridges provide
consistent, high performance and cost-effective
solutions for both common and more challenging
industrial applications, varying from pre-filter for
high purity water up to final filtration for paints and
lacquers, or total filtration for various chemicals.
The product range contains many single and
multi-cartridge filter housings made of stainless
steel and plastic designed for ease-of-use, even
in the most demanding industries and filtration
applications. Eaton also supplies a wide range of
customized filtration and separation solutions.
Markets
• Chemical • Oil & Gas
• Cosmetics • Power
• Electronics • Pulp & Paper
• Metals • Water/Wastewater
Industrial Process Filter Cartridges
Selection guide
DEPTH FILTER CARTRIDGES
LOFPLEAT™ EE filter cartridges LOFPLEAT™ AG filter cartridges LOFPLEAT™ HP filter cartridges LOFPLEAT™ GG and HT
Pleated polypropylene filter media provides a Pleated polypropylene filter media provides Pleated polypropylene filter media provides filter cartridges
high filtration surface area for nominal rated an absolute filtration in a wide range of a large filtration surface area for absolute
applications. filtration performance for all most demanding Feature high efficiency micro fiberglass
filtration performance in a wide range of
applications. media in combination with polypropylene or
applications.
polyester (high temperature) support cages for
a wide variety of industrial applications where
traditional media would not be applicable.
LOFPLEAT™ HF filter cartridges LOFPLEAT™ CP filter cartridges LOFMEM™ W filter cartridges LOFMEM™ T filter cartridges
Large diameter cartridges designed with pleated Large diameter cartridges combine high Industrial grade PES membrane filter Industrial grade PTFE membrane filter
media construction in polypropylene or micro efficiency with extreme surface area for cartridges offer high efficiencies combined cartridges offer precision filtration for
fiberglass combines high surface area with an in- retrofitting in specific filtration systems. with large filtration area for general industrial applications under harsh, corrosive
to-out filtration flow for use in as well bag filter applications. environments and are commonly applicable in
housings as in various industrial systems. various tank venting applications.
Overview of available adapter codes
ADAPTER CODES
Code (): Double open end (DOE) Code G: Double open end (DOE) Code DOE: Double open end (DOE) Code 1: Single open end (SOE) with Code 3: Single open end (SOE)
without end caps (only LOFTREX and with foamed Polypropylene flat gaskets with flat gaskets (only LOFPLEAT, double bayonet adapter (2-226 O-ring) with double bayonet adapter (2-226
LOFTOP) (only LOFTREX and LOFTOP) LOFMEM and LOFMET) and flat end cap O-ring) and end cap with fin
ADAPTER CODES
Code 4: Single open end (SOE) with Code 2: Single open end (SOE) Code M1 and M2: Single open Code 10 and 20: Double open end
adapter (2-222 O-ring) and flat end cap with adapter (2-222 O-ring) and end end (SOE) with 3/4" male NPT threaded (DOE) with internal O-ring (Code 10);
cap with fin end (Code M1) respectively 1" male Single open end (SOE) with internal
NPT threaded end (Code M2) O-ring (Code 20)
(only LOFMET)
Technical data
Filter cartridge type LOFTREX LOFTREX M LOFTOP LOFTOP nylon LOFTOP coreless LOFWIND
1, 3, 5, 10, 20, 30, 50, 1, 3, 5, 10, 20, 30, 50, 70, 0.5, 1, 3, 5, 10, 20, 30, 50, 0.5, 1, 3, 5, 10, 20, 30, 50, 1, 5, 10, 20, 40, 70, 0.5, 1, 3, 5, 10, 25, 50, 75,
Retention rating (µm) 75, 90 75, 90, 120, 150 70, 90, 120 70, 90, 120 90, 120 100, 150
5", 9.75", 10", 19.5", 20", 5", 9.75", 10", 19.5", 20", 5", 9.75", 10", 19.5", 20", 5", 9.75", 10", 19.5", 20", 5", 9.75", 10", 19.5", 20",
Lengths (nominal) 29.25", 30", 39", 40", 50" 29.25", 30", 39", 40" 29.25", 30", 39", 40" 29.25", 30", 39", 40"
20", 40"
29.25", 30", 39", 40"
Cages – – – – – –
80 °C (polypropylene)
80 °C (polypropylene)
Max. operating temperature 65 °C 65 °C 80 °C 150 °C
130 °C (polyamide 6.6)
160 °C (cotton)
400 °C (fiberglass)
4.0 bar at 25 °C
(polypropylene)
6.2 bar at 30 °C 1.0 bar at 80 °C
5.5 bar at 70 °C (polypropylene)
Max. pressure difference 2.5 bar at 25 °C 4.0 bar at 25 °C 4.0 bar at 25 °C 4.8 bar at 100 °C 2.5 bar at 30 °C
in flow direction 3.4 bar at 150 °C 4.0 bar at 32 °C
(polyamide 6.6)
1.0 bar at 130 °C
(polyamide 6.6)
Technical data
Filter cartridge type LOFCLEAN LOFSORB LOFMET LOFPLEAT EE LOFPLEAT AG LOFPLEAT HP
2, 5, 10, 25, 50, 75, Type 01/04: 1, 5, 10 0.5, 1, 5, 10, 15, 35, 0.2, 0.25, 0.45, 0.5, 1, 2, 5, 0.2, 0.45, 1, 2.5, 5, 10, 25, 0.2, 0.45, 1, 2.5, 5,
Retention rating (µm) 125, 150 Type 02: 5 50, 100 10, 25, 50 50, 100 10, 20
Adapter code () () DOE, 1, 4, M1, M2 DOE, 1, 2, 3, 4, 10, 20, 28 DOE, 1, 2, 3, 4, 10, 20, 28 DOE, 1, 2, 3, 4, 10, 20, 28
Ethylene-octene
Titanium and
End caps – copolymer (type 01/04),
stainless steel 316
Polypropylene Polypropylene Polypropylene
polypropylene (type 02)
Polypropylene fleece
Cages –
and net
– Polypropylene Polypropylene Polypropylene
10 bar at 21 °C
8.6 bar at 38 °C
Max. pressure difference 6.2 bar at 65 °C
7 bar (type 01/04)
17.4 bar
5.2 bar at 21 °C 5.2 bar at 21 °C 5.2 bar at 21 °C
in flow direction 4.5 bar at 82 °C
2.5 bar (type 02) 2.8 bar at 80 °C 2.8 bar at 80 °C 2.8 bar at 80 °C
1.7 bar at 121 °C
Filter cartridge type LOFPLEAT GG LOFPLEAT HT LOFPLEAT HF LOFPLEAT HF-G LOFPLEAT CP LOFMEM W LOFMEM T
0.2, 0.45, 1, 3, 0.2, 0.45, 1, 3, 1, 3, 5, 10, 20, 40, 1, 2.5, 4.5, 1, 5, 10, 20, 30, 0.05, 0.1, 0.2, 0.05, 0.1, 0.2,
Retention rating (µm) 10, 30 10, 30 60, 100 10, 20 40, 70 0.45, 0.65 0.45, 1
5", 9.75", 10", 20", 5", 9.75", 10", 20", 5", 9.75", 10", 20", 5", 9.75", 10", 20",
Lengths (nominal) 30", 40" 30", 40"
20", 40", 60" 20", 40", 60" 39"
30", 40" 30", 40"
Polypropylene or
End caps Polypropylene Polyester Polypropylene
polyacetal
Polypropylene Polypropylene Polypropylene
Polypropylene or
Cages Polypropylene Polyester Polypropylene
polyester
Polypropylene Polypropylene Polypropylene
Polypropylene: 82 °C
Max. operating temperature 80 °C 110 °C 71 °C
Polyacetal: 110 °C
80 °C 82 °C 95 °C