3900 Series Base Station

V100R010C10
eNodeBFunction Parameter
Reference
Issue 04

Date 2015/07/27

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei
Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of
products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherw
specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties
guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen
ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty
any kind, express or implied.

Huawei Technologies Co., Ltd.

Huawei Industrial Base
Bantian, Longgang
Address:
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
 rights reserved.
any form or by any means without prior written consent of Huawei

Technologies Co., Ltd.

ed in this document are the property of their respective holders.

by the contract made between Huawei and the customer. All or part of the
ay not be within the purchase scope or the usage scope. Unless otherwise
mmendations in this document are provided "AS IS" without warranties,
mplied.

notice. Every effort has been made in the preparation of this document to
on, and recommendations in this document do not constitute a warranty of
Purpose

This document describes the MO parameters of eNodeB For the details about the paramete
interconnection, see the BTS3900 Parameter List.

Intended Audience
This document is intended for:
• Network planners
• System engineers
• Field engineers
• Shift operators
• Site maintainers
• Network operators

Parameter Attribute Description

The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
Parameter Name

NE

MML Command

Meaning

IsKey
Mandatory
Dynamic Attribute
Feature ID
Feature Name

Value Type

GUI Value Range

Enumeration Number/Bit

Unit
Actual Value Range

Default Value

Recommended Value
Initial Value Source

Impact
Parameter Relationship

Access

Service Interrupted After Modification

Interruption Scope
Interruption Duration (min)
Caution

Validation of Modification

Impact on Radio Network

Performance
Introduced in Version…
Attribute
 Applicable Mode

Change History
For detailed parameter changes, see the release notes.

Issue Date
04 2015/7/27
03 2015/6/29
02 2015/5/8
01 2015/3/23
Draft B 2015/2/26
Draft A 2015/1/15
he MO parameters of eNodeB For the details about the parameters related to northbound interface
TS3900 Parameter List.

scription
es the attributes of each parameter.
Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NE Type of a product displayed on the OSS. The value can be BTS3900, BTS3900 WCDMA, or
BTS3900 LTE. BTS3900 indicates a co-MPT base station; BTS3900 WCDMA indicates a UMTS
base station; BTS3900 LTE indicates an LTE base station. These NE types are applicable to the
following base station models: DBS3900, BTS3900, BTS3900A, BTS3900L, BTS3900AL, and
BTS3900C.
Man Machine Language (MML) command related to the parameter.
Function of a parameter, protocol that defines the parameter, whether the parameter is an
advanced parameter.
Advanced parameters are not configured through northbound interfaces. To modify these
parameters, contact Huawei Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve
optimal network performance.
These parameters will have fixed values and will be deleted after the beta test or test at the
customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal
network performance, multiple parameters must be modified because modification of a single
parameter has little effect on the network and even may cause accidents, for example, service
interruption.

Whether the parameter is used to identify an MO instance.

Whether the parameter is mandatory for creating an MO instance.
Whether the parameter is dynamic for an MO. If the parameter is not dynamic, it can be added,
modified, or removed; if the parameter is dynamic, it cannot.
ID of the feature that uses the parameter.
Name of the feature that uses the parameter.
Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type,
Interval Type, Bit Field Type, Character String Type, Wildcard Mask Type, Subnet Mask Type,
Password Type, Any Type, BCD Number Type, Struct.
Range of the parameter values displayed on the GUI.
Enumeration number corresponding to the GUI value of a parameter of the enumeration type, or
bit position corresponding to the GUI value of a parameter of the bit field type. N/A is filled if the
parameter value is not enumeration type or bit field type.
Note: For a parameter of the bit field type, bit position lists only the bits in use. Bits not in use are
set to 0 and not described in this document.

Unit of a parameter value displayed on the GUI.

Range of the actual values corresponding to the parameter values displayed on the GUI.
Initial value assigned by the system for a parameter. None indicates that no default value is
available.
For a mandatory parameter, no default value is available.
Generally, it is displayed on the configuration window of an ADD command but not displayed on
the configuration window of a MOD/RMV/DSP/LST/SET command.
Note:
For bit field type parameters, sub-parameter:On (the corresponding bit is set to 1) indicates that
the sub-parameter is selected in the check box on the configuration window. In this case, the
corresponding switch will be turned on, the corresponding object will be selected, or the
corresponding operation will be performed; sub-parameter:Off (the corresponding bit is set to 0)
indicates that the sub-parameter is deselected in the check box on the configuration window. In
this case, the corresponding switch will be turned off, the corresponding object will be deselected,
or the corresponding operation will not be performed.

Parameter values recommended for different scenarios. None indicates that no default value is
available.
Note:
For bit field type parameters, sub-parameter:On (the corresponding bit is set to 1) indicates that
the sub-parameter is selected in the check box on the configuration window. In this case, the
corresponding switch will be turned on, the corresponding object will be selected, or the
corresponding operation will be performed; sub-parameter:Off (the corresponding bit is set to 0)
indicates that the sub-parameter is deselected in the check box on the configuration window. In
this case, the corresponding switch will be turned off, the corresponding object will be deselected,
or the corresponding operation will not be performed.
Source for the initial configuration of a parameter. The initial value source can be:
Radio planning (Internal planning): The parameter value comes from the radio network plan,
facilitating resource management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network
plan. The NE negotiates this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network
plan, facilitating resource management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport
network plan. The NE negotiates this value with the peer device to ensure successful
interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value,
where the recommended value is preferential. The default/recommended value can be used in
most scenarios and adjusted for a specific scenario.
N/A: The parameter value is not required.
Parameter impact scope.
Relationship with other parameters. For example, to use this parameter, you need to set related
Whether a parameter has one of the following properties:
Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.
Whether the parameter modification interrupts the ongoing services. One of the following
comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing
services, and has no impact on the network access of UEs in idle mode.
No (For the UE in idle mode, ...): The modification does not interrupt the ongoing services, but
affects network access of UEs in idle mode...
N/A: This comment is used when a parameter cannot be modified.

Possible interruption scope.

Possible interruption duration (unit: minute).
Cautions to be taken during the modification.
How this parameter takes effect and whether the equipment needs to be restarted after the
modification. The parameter modification does not impact the equipment means that the
parameter takes effect immediately after the modification.
Impact of the parameter on radio network performance.

Product version in which the parameter is introduced.

Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.
 Indicates the applicable mode of a parameter.
G:The parameter is valid for GSM mode.
U:The parameter is valid for UMTS mode.
L:The parameter is valid for LTE mode.
If the parameter is applicable to multiple modes, the modes are separated by commas. For
example, if the parameter is applicable to GSM and UMTS, the value is G,U.
If a parameter not applicable to a mode is used, the services of the mode will not be affected
irrespective of whether the parameter setting is successful.

nges, see the release notes.

Description
This is the fourth official release.
This is the third official release.
This is the second official release.
This is the first official release.
Draft B.
Draft A.
rameters related to northbound interface

parameter.

e value can be BTS3900, BTS3900 WCDMA, or

ase station; BTS3900 WCDMA indicates a UMTS
ase station. These NE types are applicable to the
900, BTS3900A, BTS3900L, BTS3900AL, and

ed to the parameter.
he parameter, whether the parameter is an

gh northbound interfaces. To modify these

Center for technical support.
ns, they are treated as advanced parameters:
ew feature or a customized feature to achieve

ll be deleted after the beta test or test at the

eat impact on network KPIs or performance.

e not required for features. To achieve optimal
t be modified because modification of a single
ven may cause accidents, for example, service

O instance.
g an MO instance.
 f the parameter is not dynamic, it can be added,
mic, it cannot.

dress Type, Compound Type, Enumeration Type,

ype, Wildcard Mask Type, Subnet Mask Type,
Struct.
e GUI.
value of a parameter of the enumeration type, or
parameter of the bit field type. N/A is filled if the
ield type.
osition lists only the bits in use. Bits not in use are

.
e parameter values displayed on the GUI.
meter. None indicates that no default value is

available.
indow of an ADD command but not displayed on
LST/SET command.

On (the corresponding bit is set to 1) indicates that

on the configuration window. In this case, the
esponding object will be selected, or the
b-parameter:Off (the corresponding bit is set to 0)
n the check box on the configuration window. In
ed off, the corresponding object will be deselected,
rmed.

cenarios. None indicates that no default value is

On (the corresponding bit is set to 1) indicates that

on the configuration window. In this case, the
esponding object will be selected, or the
b-parameter:Off (the corresponding bit is set to 0)
n the check box on the configuration window. In
ed off, the corresponding object will be deselected,
rmed.
er. The initial value source can be:
meter value comes from the radio network plan,

The parameter value comes from the radio network

r device to ensure successful interworking.
parameter value comes from the transport network
NE.
er): The parameter value comes from the transport
h the peer device to ensure successful

mes from the equipment plan.

mes from the algorithm or function design.
value uses the default or recommended value,
The default/recommended value can be used in
ario.

e, to use this parameter, you need to set related

properties:
ted, or modified.
eted only.
he ongoing services. One of the following

rvices.
The modification does not interrupt the ongoing
cess of UEs in idle mode.
ation does not interrupt the ongoing services, but

cannot be modified.

e equipment needs to be restarted after the

es not impact the equipment means that the
odification.
rmance.

duced.
transport parameter, or an equipment parameter.
, the modes are separated by commas. For
and UMTS, the value is G,U.
, the services of the mode will not be affected
successful.
 MO Parameter ID Parameter Name NE

CnOperatorExtende BTS3900, BTS3900

CnOperatorId CN Operator ID
dQci LTE

CnOperatorExtende CN Operator BTS3900, BTS3900

ExtendedQci
dQci extended QCI LTE

Service-based inter-
CnOperatorExtende ServiceIrHoCfgGro BTS3900, BTS3900
RAT handover
dQci upId LTE
policy group ID

Service-based inter-
CnOperatorExtende ServiceIfHoCfgGrou BTS3900, BTS3900
Freq handover
dQci pId LTE
policy group ID

BTS3900, BTS3900
CnOperatorHoCfg CnOperatorId CN Operator ID
LTE

BTS3900, BTS3900
CnOperatorHoCfg FirstRatPri First RAT Priority
LTE
 Second RAT BTS3900, BTS3900
CnOperatorHoCfg SecondRatPri
Priority LTE

LTE TDD inter-freq

TddIfHoA2ThdRsrp BTS3900, BTS3900
CnOperatorHoCfg A2 Threshold
Offset LTE
RSRP Offset

LTE FDD inter-freq

FddIfHoA2ThdRsrp BTS3900, BTS3900
CnOperatorHoCfg A2 Threshold
Offset LTE
RSRP Offset
 UTRAN A2
UtranA2ThdRsrpOff BTS3900, BTS3900
CnOperatorHoCfg Threshold RSRP
set LTE
Offset

GERAN A2
GeranA2ThdRsrpOf BTS3900, BTS3900
CnOperatorHoCfg Threshold RSRP
fset LTE
Offset

SRVCC with PSHO

SrvccWithPsBased BTS3900, BTS3900
CnOperatorHoCfg Based UTRAN Cell
CellCapSw LTE
Capb Switch

BTS3900, BTS3900
CnOperatorSpidCfg CnOperatorId CN Operator ID
LTE
 BTS3900, BTS3900
CnOperatorSpidCfg Spid Spid
LTE

RAT frequency BTS3900, BTS3900

CnOperatorSpidCfg RatFreqPriorityInd
priority indication LTE

RatFreqPriorityGrou RAT frequency BTS3900, BTS3900

CnOperatorSpidCfg
pId priority group ID LTE

CnOperatorStandar BTS3900, BTS3900

CnOperatorId CN Operator ID
dQci LTE

CnOperatorStandar QoS Class BTS3900, BTS3900

Qci
dQci Indication LTE
 Service-based inter-
CnOperatorStandar ServiceIrHoCfgGro BTS3900, BTS3900
RAT handover
dQci upId LTE
policy group ID

Service-based inter-
CnOperatorStandar ServiceIfHoCfgGrou BTS3900, BTS3900
Freq handover
dQci pId LTE
policy group ID

Service-based
CnOperatorStandar ServiceHoBearerPo BTS3900, BTS3900
Handover Bearer
dQci licy LTE
Policy

CSFallBackBlindHo BTS3900, BTS3900

CnOperatorId CN Operator ID
Cfg LTE
CSFallBackBlindHo Highest priority BTS3900, BTS3900
InterRatHighestPri
Cfg InterRat LTE
CSFallBackBlindHo Second priority BTS3900, BTS3900
InterRatSecondPri
Cfg InterRat LTE
CSFallBackBlindHo Lowest priority BTS3900, BTS3900
InterRatLowestPri
Cfg InterRat LTE

CSFallBackBlindHo UTRAN LCS BTS3900, BTS3900

UtranLcsCap
Cfg capability LTE

CSFallBackBlindHo GERAN LCS BTS3900, BTS3900

GeranLcsCap
Cfg capability LTE

CSFallBackBlindHo CDMA2000 LCS BTS3900, BTS3900

CdmaLcsCap
Cfg capability LTE
 CSFB Highest
CSFallBackBlindHo BTS3900, BTS3900
IdleCsfbHighestPri priority InterRat for
Cfg LTE
Idle UE

CSFB Second
CSFallBackBlindHo BTS3900, BTS3900
IdleCsfbSecondPri priority InterRat for
Cfg LTE
Idle UE
 CSFB Lowest
CSFallBackBlindHo BTS3900, BTS3900
IdleCsfbLowestPri priority InterRat for
Cfg LTE
Idle UE

CSFB to UTRAN
CSFallBackBlindHo UtranCsfbBlindRedi BTS3900, BTS3900
Blind Redirection
Cfg rRrSw LTE
RR Switch

CSFallBackPolicyCf CSFB handover BTS3900, BTS3900

CsfbHoPolicyCfg
g policy Configuration LTE

CSFB handover
CSFallBackPolicyCf IdleModeCsfbHoPol BTS3900, BTS3900
policy Configuration
g icyCfg LTE
for idle ue
 Csfb User Arp
CSFallBackPolicyCf CsfbUserArpCfgSwi BTS3900, BTS3900
Configuration
g tch LTE
Switch

CSFallBackPolicyCf Normal Csfb User BTS3900, BTS3900

NormalCsfbUserArp
g Arp LTE

EutranVoipHoBlkLis Mobile country BTS3900, BTS3900

Mcc
t code LTE
EutranVoipHoBlkLis Mobile network BTS3900, BTS3900
Mnc
t code LTE

EutranVoipHoBlkLis BTS3900, BTS3900

Tac Tac
t LTE

BTS3900, BTS3900
InterPlmnHoList CnOperatorId CN Operator ID
LTE

Target Mobile BTS3900, BTS3900

InterPlmnHoList TarMcc
country code LTE
 Target Mobile BTS3900, BTS3900
InterPlmnHoList TarMnc
network code LTE

RatFreqPriorityGrou RatFreqPriorityGrou RAT frequency BTS3900, BTS3900

p pId priority group ID LTE

RatFreqPriorityGrou BTS3900, BTS3900

RatType RAT Type
p LTE

RatFreqPriorityGrou DL Earfcn or BTS3900, BTS3900

DlEarfcn
p Bandclass LTE

RatFreqPriorityGrou BTS3900, BTS3900

Priority Priority
p LTE

RatFreqPriorityGrou GERAN Frequency BTS3900, BTS3900

BandIndicator
p Indicator LTE
ServiceIfDlEarfcnGr BTS3900, BTS3900
CnOperatorId CN Operator ID
p LTE

ServiceIfDlEarfcnGr ServiceIfHoCfgGrou Service Interfreq Ho BTS3900, BTS3900

p pId Policy Group Id LTE

ServiceIfDlEarfcnGr Downlink EARFCN BTS3900, BTS3900

DlEarfcnIndex
p Index LTE

ServiceIfDlEarfcnGr BTS3900, BTS3900

DlEarfcn Downlink EARFCN
p LTE

ServiceIfDlEarfcnGr ServiceHoFreqPrior Service Handover BTS3900, BTS3900

p ity Frequency Priority LTE

ServiceIfHoCfgGrou BTS3900, BTS3900

CnOperatorId CN Operator ID
p LTE

Service-based inter-
ServiceIfHoCfgGrou ServiceIfHoCfgGrou BTS3900, BTS3900
Freq handover
p pId LTE
policy group ID
ServiceIfHoCfgGrou Inter-Freq handover BTS3900, BTS3900
InterFreqHoState
p state LTE

ServiceIfHoCfgGrou BTS3900, BTS3900

DlEarfcn Downlink EARFCN
p LTE

Service-based
ServiceIfHoCfgGrou BTS3900, BTS3900
A4RptWaitingTimer InterFreq A4 Report
p LTE
Waiting Timer
 Service-based
ServiceIfHoCfgGrou BTS3900, BTS3900
A4TimeToTriger InterFreq A4 time to
p LTE
trigger

ServiceIrHoCfgGro BTS3900, BTS3900

CnOperatorId CN Operator ID
up LTE

Service-based inter-
ServiceIrHoCfgGro ServiceIrHoCfgGro BTS3900, BTS3900
RAT handover
up upId LTE
policy group ID

ServiceIrHoCfgGro Inter-RAT handover BTS3900, BTS3900

InterRatHoState
up state LTE
 Service-based
ServiceIrHoCfgGro BTS3900, BTS3900
ServiceIrMeasMode Inter-RAT HO
up LTE
Measure Mode

BTS3900, BTS3900
SpidCfg Spid Spid
LTE

BTS3900, BTS3900
SpidCfg DrxStatus Drx status
LTE

RAT frequency BTS3900, BTS3900

SpidCfg RatFreqPriorityInd
priority indication LTE

RatFreqPriorityGrou RAT frequency BTS3900, BTS3900

SpidCfg
pId priority group ID LTE

BTS3900, BTS3900
SpidCfg PreallocationStatus PreallocationStatus
LTE

InterFreq Mlb BTS3900, BTS3900

SpidCfg InterFreqMlbSwitch
Switch LTE
 BTS3900, BTS3900
SpidCfg InterRatMlbSwitch InterRat Mlb Switch
LTE

SPID-based
HoBackToHPLMNS BTS3900, BTS3900
SpidCfg Handover Back To
witch LTE
HPLMN Switch

BTS3900, BTS3900
SpidHPlmnList StartSpid Start SPID
LTE

BTS3900, BTS3900
SpidHPlmnList EndSpid End SPID
LTE

Mobile Country BTS3900, BTS3900

SpidHPlmnList Mcc
Code LTE

Mobile Network BTS3900, BTS3900

SpidHPlmnList Mnc
Code LTE

UtranNetworkCapCf Mobile country BTS3900, BTS3900

Mcc
g code LTE

UtranNetworkCapCf Mobile network BTS3900, BTS3900

Mnc
g code LTE
UtranNetworkCapCf BTS3900, BTS3900
RncId Rnc Id
g LTE

UtranNetworkCapCf Network Capability BTS3900, BTS3900

NetworkCapCfg
g Configuration LTE

eNBCnOpQciRsvd BTS3900, BTS3900

CnOperatorId CN Operator ID
Para LTE

eNBCnOpQciRsvd QoS Class BTS3900, BTS3900

Qci
Para Indication LTE
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900
RsvdSwPara0
Para Parameter 0 LTE
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900
RsvdSwPara1
Para Parameter 1 LTE
eNBCnOpQciRsvd Reserved Switch BTS3900, BTS3900
RsvdSwPara2
Para Parameter 2 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara2
Para Parameter 2 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara3
Para Parameter 3 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara4
Para Parameter 4 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara5
Para Parameter 5 LTE
eNBCnOpQciRsvd Reserved BTS3900, BTS3900
RsvdPara6
Para Parameter 6 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara7
Para Parameter 7 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara8
Para Parameter 8 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara9
Para Parameter 9 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara10
Para Parameter 10 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara11
Para Parameter 11 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara12
Para Parameter 12 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara13
Para Parameter 13 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara14
Para Parameter 14 LTE
eNBCnOpQciRsvd Reserved BTS3900, BTS3900
RsvdPara15
Para Parameter 15 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara16
Para Parameter 16 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara17
Para Parameter 17 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara18
Para Parameter 18 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara19
Para Parameter 19 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara20
Para Parameter 20 LTE

eNBCnOpQciRsvd Reserved BTS3900, BTS3900

RsvdPara21
Para Parameter 21 LTE
 eNodeBFunctionNa eNodeB Function BTS3900, BTS3900
eNodeBFunction
me Name LTE

Application BTS3900, BTS3900

eNodeBFunction ApplicationRef
Reference LTE

BTS3900, BTS3900
eNodeBFunction eNodeBId eNodeB ID
LTE

BTS3900, BTS3900
eNodeBFunction UserLabel User Label
LTE

BTS3900, BTS3900
eNodeBFunction NermVersion NeRM Version
LTE

BTS3900, BTS3900
eNodeBFunction ProductVersion Product Version
LTE
 BTS3900, BTS3900
EUAPN APN APN
LTE

Primary Domain BTS3900, BTS3900

EUAPN PrimaryDNS
Name Server LTE

Secondary Domain BTS3900, BTS3900

EUAPN SecondaryDNS
Name Server LTE

BTS3900, BTS3900
EUAPN IPAddressPoolID Address Pool ID
LTE

BTS3900, BTS3900
EUAPNTemplate APNTemplateID APN Template ID
LTE

BTS3900, BTS3900
EUAPNTemplate APN APN
LTE

BTS3900, BTS3900
EUAPNTemplate QCI QoS class identifier
LTE

APN Aggregate
BTS3900, BTS3900
EUAPNTemplate APNAMBRDL Maximum Bit Rate
LTE
Downlink

APN Aggregate
BTS3900, BTS3900
EUAPNTemplate APNAMBRUL Maximum Bit Rate
LTE
Uplink

Allocation and BTS3900, BTS3900

EUAPNTemplate ARP
Retention Priority LTE

PreemptionCapabili Preemption BTS3900, BTS3900

EUAPNTemplate
ty Capability LTE

PreemptionVulnera Preemption BTS3900, BTS3900

EUAPNTemplate
bility Vulnerability LTE

BTS3900, BTS3900
EUEPCInfo LocalEpcId Local EPC ID
LTE
 BTS3900, BTS3900
EUEPCInfo MmeGroupId MME Group ID
LTE

BTS3900, BTS3900
EUEPCInfo MMECode MME Code
LTE

FullNameForNetwor Full Name for BTS3900, BTS3900

EUEPCInfo
k Network LTE

ShortNameForNetw Short Name for BTS3900, BTS3900

EUEPCInfo
ork Network LTE

BTS3900, BTS3900
EUEPCSec CiphAlgo Cipher Algorithm
LTE

BTS3900, BTS3900
EUEPCSec IntAlgo Integrity Algorithm
LTE

BTS3900, BTS3900
EUIPAddressPool IPAddressPoolID IP Address Pool ID
LTE

BTS3900, BTS3900
EUIPAddressPool StartIPAddress Start IP Address
LTE

BTS3900, BTS3900
EUIPAddressPool EndIPAddress End IP Address
LTE

BTS3900, BTS3900
EUIPAddressPool Mask Mask
LTE

BTS3900, BTS3900
EuRrn LocalSubscriberId Local Subscriber ID
LTE

BTS3900, BTS3900
EuRrn OmIp OM IP
LTE
 BTS3900, BTS3900
EuRrn ActiveTime Active Time
LTE

BTS3900, BTS3900
EuRrn DhcpServerIp DHCP Server IP
LTE

BTS3900, BTS3900
EuRrn DIR Directory Name
LTE

ExtendedDhcpServ Extended DHCP BTS3900, BTS3900

EuRrn
erIp Server IP LTE

BTS3900, BTS3900
EuRrn GA Guage Option
LTE

BTS3900, BTS3900
EuRrn IP FTP Server IP
LTE

BTS3900, BTS3900
EuRrn PWD Password
LTE

BTS3900, BTS3900
EuRrn ResetMode Reset Mode
LTE

BTS3900, BTS3900
EuRrn SoftwareStatus Software Status
LTE

BTS3900, BTS3900
EuRrn StorageArea Storage Area
LTE

BTS3900, BTS3900
EuRrn SV Software Version
LTE

BTS3900, BTS3900
EuRrn USR User Name
LTE
 SyncEthClockSwitc SyncEth Clock BTS3900, BTS3900
EuRrn
h Switch LTE

BTS3900, BTS3900
EuRrn FileType File Type
LTE

BTS3900, BTS3900
EuRrnLanIp LocalSubscriberId Local Subscriber ID
LTE

BTS3900, BTS3900
EuRrnLanIp LanIp LAN IP
LTE

BTS3900, BTS3900
EuRrnLanIp LanMask LAN Mask
LTE

BTS3900, BTS3900
EuRrnPort LocalSubscriberId Local Subscriber ID
LTE

BTS3900, BTS3900
EuRrnPort PN Port No.
LTE

BTS3900, BTS3900
EuRrnPort PortSwitch Port Switch
LTE

BTS3900, BTS3900
EuRrnRt RtId Route ID
LTE

BTS3900, BTS3900
EuRrnRt LocalSubscriberId Local Subscriber ID
LTE

BTS3900, BTS3900
EuRrnRt DstIp Destination IP
LTE
 BTS3900, BTS3900
EuRrnRt DstMask Destination Mask
LTE

BTS3900, BTS3900
EuRrnRt NextHop Next Hop
LTE

BTS3900, BTS3900
EuSubscriber LocalSubscriberId Local Subscriber ID
LTE

BTS3900, BTS3900
EuSubscriber SubscriberType Subscriber Type
LTE

International Mobile BTS3900, BTS3900

EuSubscriber IMSI
Subscriber ID LTE

BTS3900, BTS3900
EuSubscriber RrnId RRN ID
LTE

BTS3900, BTS3900
EuSubscriber CellId Cell ID
LTE

Individual
BTS3900, BTS3900
EuSubscriber KI Subscriber
LTE
Authentication Key

Operator Variant
BTS3900, BTS3900
EuSubscriber OP Algorithm
LTE
Configuration Field

Uplink Aggregate BTS3900, BTS3900

EuSubscriber UlAmbr
Maximum Bit Rate LTE
 Downlink Aggregate BTS3900, BTS3900
EuSubscriber DlAmbr
Maximum Bit Rate LTE

SubscriberTemplate Subscriber BTS3900, BTS3900

EuSubscriber
ID Template ID LTE

Subscriber BTS3900, BTS3900

EuSubscriber SubscriberDesc
Description LTE

EUSubscriberTempl SubscriberTemplate Subscirber BTS3900, BTS3900

ate ID Template ID LTE

EUSubscriberTempl BTS3900, BTS3900

APNTemplateID APN Template ID
ate LTE

EUSubscriberTempl BTS3900, BTS3900

TemplateName Template Name
ate LTE

Secondary
EUSubscriberTempl SecondaryAPNTem APNTemplate BTS3900, BTS3900
ate plateCfgInd Configuration LTE
Indicator

EUSubscriberTempl SecondaryAPNTem Secondary APN BTS3900, BTS3900

ate plateID Template ID LTE

Extended QoS BTS3900, BTS3900

RelayExtendedQci ExtendedQci
Class Indication LTE

Default Bearer BTS3900, BTS3900

RelayExtendedQci DefaultBearerInd
Indication LTE

RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900

RelayExtendedQci
d parameter group ID LTE
 BTS3900, BTS3900
RelayExtendedQci SchType Schedule Type
LTE
 Uplink Schedule BTS3900, BTS3900
RelayExtendedQci UlSchWeight
Weight LTE

Downlink Schedule BTS3900, BTS3900

RelayExtendedQci DlSchWeight
Weight LTE
 BTS3900, BTS3900
RelayExtendedQci DscpLower Dscp Lower
LTE

BTS3900, BTS3900
RelayExtendedQci DscpUpper Dscp Upper
LTE

RrnPreAllocationW RRN Pre-allocation BTS3900, BTS3900

RelayExtendedQci
eight Weight LTE
 Intrafreq Measure
A3TimeToTrigForA BTS3900, BTS3900
ANRMeasureParam Time to Trigger for
NR LTE
ANR
 Intrafreq Hysteresis BTS3900, BTS3900
ANRMeasureParam A3HystForANR
for ANR LTE

Intrafreq Measure BTS3900, BTS3900

ANRMeasureParam A3OffsetForANR
Offset for ANR LTE
 Interfreq Measure
A4TimeToTrigForA BTS3900, BTS3900
ANRMeasureParam Time to Trigger for
NR LTE
ANR
 Interfreq Hysteresis BTS3900, BTS3900
ANRMeasureParam A4HystForANR
for ANR LTE
 Interfreq RSRP BTS3900, BTS3900
ANRMeasureParam A4ThdRsrpForANR
Threshold for ANR LTE

BTS3900, BTS3900
CounterCheckPara CounterCheckTimer Counter check timer
LTE
 CounterCheckCoun Counter check BTS3900, BTS3900
CounterCheckPara
tNum count number LTE

CounterCheckUser Counter check user BTS3900, BTS3900

CounterCheckPara
RelSwitch Release switch LTE

Primary cipher BTS3900, BTS3900

ENodeBCipherCap PrimaryCipherAlgo
algorithm LTE
 Second cipher BTS3900, BTS3900
ENodeBCipherCap SecondCipherAlgo
algorithm LTE

Third cipher BTS3900, BTS3900

ENodeBCipherCap ThirdCipherAlgo
algorithm LTE

Fourth cipher BTS3900, BTS3900

ENodeBCipherCap FourthCipherAlgo
algorithm LTE
ENodeBConnState S1MessageWaiting S1 Message BTS3900, BTS3900
Timer Timer Waiting Timer LTE
ENodeBConnState X2MessageWaiting X2 Message BTS3900, BTS3900
Timer Timer Waiting Timer LTE
ENodeBConnState UuMessageWaiting UU Message BTS3900, BTS3900
Timer Timer Waiting Timer LTE

CDMA2000 1xRTT
ENodeBConnState Cdma1XrttHoUuPre BTS3900, BTS3900
HO Uu Prepare
Timer pareTimer LTE
Timer

CDMA2000 1xRTT
ENodeBConnState Cdma1XrttHoS1Wa BTS3900, BTS3900
HO S1 Waiting
Timer itingTimer LTE
Timer

ENodeBConnState Cdma1XrttHoCompl CDMA2000 1xRTT BTS3900, BTS3900

Timer eteTimer HO Complete Timer LTE

ENodeBConnState CdmaHrpdHoComp CDMA2000 HRPD BTS3900, BTS3900

Timer leteTimer HO Complete Timer LTE

CDMA2000 HRPD
ENodeBConnState CdmaHrpdHoS1Wa BTS3900, BTS3900
HO S1 Waiting
Timer itingTimer LTE
Timer
 CDMA2000 HRPD
ENodeBConnState CdmaHrpdHoUuPre BTS3900, BTS3900
HO Uu Prepare
Timer pareTimer LTE
Timer

ENodeBConnState WaitRrcConnSetup RRCConnSetupCm BTS3900, BTS3900

Timer CmpTimer p Waiting Timer LTE

ENodeBConnState SecCmpWaitingTim SecurityModeComp BTS3900, BTS3900

Timer er lete Waiting Timer LTE
 Unprotected
ENodeBConnState UpUeCapInfoWaitin BTS3900, BTS3900
UeCapInfo Waiting
Timer gTimer LTE
Timer

ENodeBConnState FirstForwardPacket First Forward BTS3900, BTS3900

Timer Timer Packet Timer LTE
ENodeBConnState BTS3900, BTS3900
EndMarkerTimer End Marker Timer
Timer LTE

S1 Message
ENodeBConnState S1MsgWaitingTimer BTS3900, BTS3900
Waiting Timer for
Timer Qci1 LTE
Qci1
 X2 Message
ENodeBConnState X2MessageWaiting BTS3900, BTS3900
Waiting Timer for
Timer TimerQci1 LTE
Qci1

UU Message
ENodeBConnState UuMessageWaiting BTS3900, BTS3900
Waiting Timer for
Timer TimerQci1 LTE
Qci1
ENodeBConnState Bearer Activity BTS3900, BTS3900
BearerActivityThd
Timer Threshold LTE

ENodeBIntegrityCa PrimaryIntegrityAlg Primary integrity BTS3900, BTS3900

p o algorithm LTE

ENodeBIntegrityCa SecondIntegrityAlg Second integrity BTS3900, BTS3900

p o algorithm LTE
ENodeBIntegrityCa Third integrity BTS3900, BTS3900
ThirdIntegrityAlgo
p algorithm LTE

ENodeBIntegrityCa NULL Algorithm BTS3900, BTS3900

NullAlgo
p config switch LTE

eNodeBUSImeisvCf BTS3900, BTS3900

ImeisvTac IMEISV TAC
g LTE

eNodeBUSImeisvCf BTS3900, BTS3900

ImeisvSvn IMEISV SVN
g LTE
eNodeBUSImeisvCf Ue Type BTS3900, BTS3900
UeTypeDesc
g Description LTE

US Ue Strategy BTS3900, BTS3900

eNodeBUSParaCfg UsStrategy
Select LTE

Configurate US BTS3900, BTS3900

eNodeBUSParaCfg UsSPIDConfig
SPID LTE
 US Ue Inactive BTS3900, BTS3900
eNodeBUSParaCfg UsUeInactiveTimer
Timer LTE

US IP Detect BTS3900, BTS3900

eNodeBUSParaCfg IPDetectInterval
Interval LTE
 US Downlink
UsUeDlPriorityFact BTS3900, BTS3900
eNodeBUSParaCfg scheduling priority
or LTE
factor

US Large Packet
UsLPktUlschPriFact BTS3900, BTS3900
eNodeBUSParaCfg UlSch Priority
or LTE
Factor

US Small Packet
UsSPktUlschPriFac BTS3900, BTS3900
eNodeBUSParaCfg UlSch Priority
tor LTE
Factor
 Big Package BTS3900, BTS3900
eNodeBUSParaCfg BigPackageIdentify
Identify LTE

eNodeBUsTraceIdC BTS3900, BTS3900

UsTraceIdIndex US Trace ID Index
fg LTE

eNodeBUsTraceIdC BTS3900, BTS3900

UsTraceID US Trace ID
fg LTE

BTS3900, BTS3900
PdcpRohcPara RohcSwitch ROHC switch
LTE

ROHC Highest BTS3900, BTS3900

PdcpRohcPara HighestMode
mode LTE
 Compression BTS3900, BTS3900
PdcpRohcPara Profiles
profiles LTE

PrivateCaBandCom Private CA Band BTS3900, BTS3900

PrivateCaCombId
b Combination ID LTE
 Maximum
PrivateCaBandCom BTS3900, BTS3900
MaxAggregatedBw Aggregated
b LTE
Bandwidth

PrivateCaBandCom Bandwidth BTS3900, BTS3900

BwCombSetId
b Combination Set ID LTE
PrivateCaBandCom Combination Band BTS3900, BTS3900
CombBand1Id
b 1 Band Identity LTE

PrivateCaBandCom Combination Band BTS3900, BTS3900

CombBand2Id
b 2 Band Identity LTE
PrivateCaBandCom Combination Band BTS3900, BTS3900
CombBand3Id
b 3 Band Identity LTE

PrivateCaBandCom Combination Band BTS3900, BTS3900

CombBand4Id
b 4 Band Identity LTE
PrivateCaBandCom Combination Band BTS3900, BTS3900
CombBand1Bw
b 1 Bandwidth LTE

PrivateCaBandCom Combination Band BTS3900, BTS3900

CombBand2Bw
b 2 Bandwidth LTE
PrivateCaBandCom Combination Band BTS3900, BTS3900
CombBand3Bw
b 3 Bandwidth LTE

PrivateCaBandCom Combination Band BTS3900, BTS3900

CombBand4Bw
b 4 Bandwidth LTE
PrivateCaBandCom BTS3900, BTS3900
CombStatus Combination Status
b LTE

BTS3900, BTS3900
RrcConnStateTimer T302 Timer302
LTE
 T320ForLoadBalan Timer320 for load BTS3900, BTS3900
RrcConnStateTimer
ce balance LTE

Timer304 for BTS3900, BTS3900

RrcConnStateTimer T304ForEutran
EUTRAN LTE
 Timer304 for BTS3900, BTS3900
RrcConnStateTimer T304ForGeran
GERAN LTE

BTS3900, BTS3900
RrcConnStateTimer T320ForOther Timer320 for other
LTE
 BTS3900, BTS3900
RrcConnStateTimer UeInactiveTimer Ue inactive timer
LTE
 BTS3900, BTS3900
RrcConnStateTimer UlSynTimer Uplink Sync Timer
LTE

Filter Repeated
FilterReptRrcConn BTS3900, BTS3900
RrcConnStateTimer RRCConnReq
ReqTimer LTE
Timer
 UeInactivityTimerDy UE Inactivity Timer BTS3900, BTS3900
RrcConnStateTimer
nDrx Dynamic DRX LTE
 Uplink Sync Timer BTS3900, BTS3900
RrcConnStateTimer UlSynTimerDynDrx
Dynamic DRX LTE
 UeInactiveTimerQci Ue Inactive Timer BTS3900, BTS3900
RrcConnStateTimer
1 for Qci1 LTE
 SRB RLC
SrbRlcParaAdaptS BTS3900, BTS3900
SrbCfg Parameter Adaptive
witch LTE
Switch

SrbPollTimerAdjust SRB Polling Timer BTS3900, BTS3900

SrbCfg
Step Adjust Step LTE
 SRB Polling Timer
SrbPollTimerMaxAd BTS3900, BTS3900
SrbCfg Maximum Adjust
justValue LTE
Value
 SRB Polling Timer
SrbPollTimerAdjUse BTS3900, BTS3900
SrbCfg Adjust User
rNumThd LTE
Threshold

BTS3900, BTS3900
TceIpMapping TceId TCE ID
LTE

BTS3900, BTS3900
TceIpMapping IPMode IP Mode
LTE

BTS3900, BTS3900
TceIpMapping TceIpV4Addr TCE IPv4 Address
LTE
 BTS3900, BTS3900
TceIpMapping TceIpV6Addr TCE IPv6 Address
LTE

ARP Schedule BTS3900, BTS3900

UserPriority ArpSchSwitch
Switch LTE

BTS3900, BTS3900
UserPriority Arp1Priority ARP1 Priority
LTE

BTS3900, BTS3900
UserPriority Arp2Priority ARP2 Priority
LTE

BTS3900, BTS3900
UserPriority Arp3Priority ARP3 Priority
LTE

BTS3900, BTS3900
UserPriority Arp4Priority ARP4 Priority
LTE

BTS3900, BTS3900
UserPriority Arp5Priority ARP5 Priority
LTE

BTS3900, BTS3900
UserPriority Arp6Priority ARP6 Priority
LTE

BTS3900, BTS3900
UserPriority Arp7Priority ARP7 Priority
LTE
 BTS3900, BTS3900
UserPriority Arp8Priority ARP8 Priority
LTE

BTS3900, BTS3900
UserPriority Arp9Priority ARP9 Priority
LTE

BTS3900, BTS3900
UserPriority Arp10Priority ARP10 Priority
LTE

BTS3900, BTS3900
UserPriority Arp11Priority ARP11 Priority
LTE

BTS3900, BTS3900
UserPriority Arp12Priority ARP12 Priority
LTE

BTS3900, BTS3900
UserPriority Arp13Priority ARP13 Priority
LTE

BTS3900, BTS3900
UserPriority Arp14Priority ARP14 Priority
LTE

BTS3900, BTS3900
UserPriority Arp15Priority ARP15 Priority
LTE

BTS3900, BTS3900
UserQciPriority Qci QoS Class Identifier
LTE

Gold Uplink
GoldUlSchPriorityF BTS3900, BTS3900
UserQciPriority Schedule Priority
actor LTE
Factor
 Gold Downlink
GoldDlSchPriorityF BTS3900, BTS3900
UserQciPriority Schedule Priority
actor LTE
Factor

Silver Uplink
SilverUlSchPriorityF BTS3900, BTS3900
UserQciPriority Schedule Priority
actor LTE
Factor

Silver Downlink
SilverDlSchPriorityF BTS3900, BTS3900
UserQciPriority Schedule Priority
actor LTE
Factor

Bronze Uplink
BronzeUlSchPriority BTS3900, BTS3900
UserQciPriority Schedule Priority
Factor LTE
Factor
 Bronze Downlink
BronzeDlSchPriority BTS3900, BTS3900
UserQciPriority Schedule Priority
Factor LTE
Factor

X2AutoSetupOpera Mobile country BTS3900, BTS3900

Mcc
tor code LTE

X2AutoSetupOpera Mobile network BTS3900, BTS3900

Mnc
tor code LTE

BTS3900, BTS3900
CaMgtCfg LocalCellId Local Cell ID
LTE

CarrAggrA2ThdRsr Carrier Aggregation BTS3900, BTS3900

CaMgtCfg
p A2 RSRP threshold LTE
 CarrAggrA4ThdRsr Carrier Aggregation BTS3900, BTS3900
CaMgtCfg
p A4 RSRP threshold LTE

Carrier
BTS3900, BTS3900
CaMgtCfg CarrierMgtSwitch Management
LTE
Switch
 CA Active Buffer BTS3900, BTS3900
CaMgtCfg ActiveBufferLenThd
Length Threshold LTE

DeactiveBufferLenT CA Deactive Buffer BTS3900, BTS3900

CaMgtCfg
hd Length Threshold LTE
 ActiveBufferDelayT CA Active Buffer BTS3900, BTS3900
CaMgtCfg
hd Delay Threshold LTE

CA Deactive
DeactiveThroughpu BTS3900, BTS3900
CaMgtCfg Throughput
tThd LTE
Threshold
 Carrier Aggregation BTS3900, BTS3900
CaMgtCfg CarrAggrA6Offset
A6 Offset LTE
 BTS3900, BTS3900
CaMgtCfg SCellAgingTime SCell Aging Time
LTE
 CaA6ReportAmoun CA A6 Report BTS3900, BTS3900
CaMgtCfg
t Amount LTE
 CA A6 Report BTS3900, BTS3900
CaMgtCfg CaA6ReportInterval
Interval LTE
 SCC Disable CQI BTS3900, BTS3900
CaMgtCfg SccDeactCqiThd
Threshold LTE
 SCC Configuration BTS3900, BTS3900
CaMgtCfg SccCfgInterval
Interval LTE
 Cell Level CA BTS3900, BTS3900
CaMgtCfg CellCaAlgoSwitch
Algorithm Switch LTE

UlCaActiveTimeToT UL CA Time To BTS3900, BTS3900

CaMgtCfg
rigger Trigger LTE
 CA user AMBR BTS3900, BTS3900
CaMgtCfg CaAmbrThd
Threshold LTE
 Measurement Cycle BTS3900, BTS3900
CaMgtCfg MeasCycleSCell
of SCell LTE
 Cell Maximum PCC BTS3900, BTS3900
CaMgtCfg CellMaxPccNumber
Number LTE

BTS3900, BTS3900
CellBfMimoParaCfg LocalCellId Local Cell ID
LTE
 BfMimoAdaptiveSwi BfMIMO adaptive BTS3900, BTS3900
CellBfMimoParaCfg
tch switch LTE
 Fixed BfMIMO BTS3900, BTS3900
CellBfMimoParaCfg FixedBfMimoMode
mode LTE
 BfMimoAdapWithou Bf Mimo Adaptive BTS3900, BTS3900
CellBfMimoParaCfg
tTm2 Without Tm2 LTE
 Single to Dual
BfSingleToDualThd Streaming BTS3900, BTS3900
CellBfMimoParaCfg
Offset Beamforming LTE
Threshold Offset
 TM3 Rank2 To Dual
TM3Rank2ToDualBf Streaming BTS3900, BTS3900
CellBfMimoParaCfg
ThdOffset Beamforming LTE
Threshold Offset
 AsUeDualBfToTM3 AS UE Dual BF To BTS3900, BTS3900
CellBfMimoParaCfg
Rank2Offset TM3 Rank2 Offset LTE
 AsUeTM3Rank2To AS UE TM3 Rank2 BTS3900, BTS3900
CellBfMimoParaCfg
DualBfOffset To Dual BF Offset LTE
 AsUeBfSingleToDu AS UE Single to BTS3900, BTS3900
CellBfMimoParaCfg
alOffset Dual BF Offset LTE
 Dual Streaming
DualBfToTM3Rank2 BTS3900, BTS3900
CellBfMimoParaCfg Beamforming To
Offset LTE
TM3 Rank2 Offset
 Offset Of In BTS3900, BTS3900
CellBfMimoParaCfg OffsetOfInStat
Statistics LTE
 Offset Of Out BTS3900, BTS3900
CellBfMimoParaCfg OffsetOfOutStat
Statistics LTE

Antenna Type-
AntBasedBfMimoAl based BF and BTS3900, BTS3900
CellBfMimoParaCfg
goSelect MIMO Algo LTE
Selection
 Tm3DirectToDualBf The Switch of Tm3 BTS3900, BTS3900
CellBfMimoParaCfg
Switch Direct to DualBF LTE

SccBfMimoAdaptive Scc Bf Mimo BTS3900, BTS3900

CellBfMimoParaCfg
Switch Adaptive Switch LTE
 High and Low
HighLowSpeedUeT BTS3900, BTS3900
CellBfMimoParaCfg Speed UE TM
hdOffset LTE
Switch Thld Offset

BTS3900, BTS3900
CellCqiAdaptiveCfg LocalCellId Local Cell ID
LTE
 CQI Period BTS3900, BTS3900
CellCqiAdaptiveCfg CqiPeriodAdaptive
Adaptive Switch LTE

BTS3900, BTS3900
CellCqiAdaptiveCfg UserCqiPeriod User CQI period
LTE
 SimulAckNackAndC SimulAckNackAndC BTS3900, BTS3900
CellCqiAdaptiveCfg
qiSwitch QI Config Switch LTE

HoAperiodicCqiCfg Handover Aperiodic BTS3900, BTS3900

CellCqiAdaptiveCfg
Switch CQI Config Switch LTE

BTS3900, BTS3900
CellDlCompAlgo LocalCellId LocalCellId
LTE
 BTS3900, BTS3900
CellDlCompAlgo DlCompA3Offset DlCompA3Offset
LTE

BTS3900, BTS3900
CellDlpcPdschPa LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellDlpcPdschPa PdschPaAdjSwitch PA adjusting switch
LTE
 PA for even power BTS3900, BTS3900
CellDlpcPdschPa PaPcOff
distribution LTE

BTS3900, BTS3900
CellDrxPara LocalCellId Local cell ID
LTE

FDD enter DRX BTS3900, BTS3900

CellDrxPara FddEnterDrxThd
threshold LTE
 FDD exit DRX BTS3900, BTS3900
CellDrxPara FddExitDrxThd
threshold LTE

TDD enter DRX BTS3900, BTS3900

CellDrxPara TddEnterDrxThdUl
threshold Uplink LTE

TDD exit DRX BTS3900, BTS3900

CellDrxPara TddExitDrxThdUl
threshold Uplink LTE

TDD enter DRX BTS3900, BTS3900

CellDrxPara TddEnterDrxThdDl
threshold Downlink LTE

TDD exit DRX BTS3900, BTS3900

CellDrxPara TddExitDrxThdDl
threshold Downlink LTE

DataAmountStatTi Data amount BTS3900, BTS3900

CellDrxPara
mer Statistic timer LTE

DRX Power Saving

TddPowerSaveMea BTS3900, BTS3900
CellDrxPara Measurement
sSwitch LTE
Switch
 DRX Power Saving
TddPowerSaveStat BTS3900, BTS3900
CellDrxPara Measurement
Timer LTE
Period

DRX Power Saving

TddPowerSavingEn BTS3900, BTS3900
CellDrxPara Measurement Enter
terDrxThd LTE
DRX Threshold

DRX Power Saving

TddPowerSavingEx BTS3900, BTS3900
CellDrxPara Measurement Exit
itDrxThd LTE
DRX Threshold

LongDrxCycleUnsy UnSync Long DRX BTS3900, BTS3900

CellDrxPara
nc Cycle LTE
 Cqi-Mask Config BTS3900, BTS3900
CellDrxPara CqiMask
Switch LTE
 OndurationTimerUn Onduration Timer BTS3900, BTS3900
CellDrxPara
sync Unsync LTE
 DrxInactivityTimerU DRX Inactivity BTS3900, BTS3900
CellDrxPara
nsync Timer Unsync LTE

BTS3900, BTS3900
CellDrxPara DrxPolicyMode DRX Policy Mode
LTE
 DrxStartOffsetOptS DRX Start Offset BTS3900, BTS3900
CellDrxPara
witch Optimization Switch LTE

DrxRcvDtxProSwitc DRX Receive DTX BTS3900, BTS3900

CellDrxPara
h Process Switch LTE
 DRX for
BTS3900, BTS3900
CellDrxPara DrxForMeasSwitch Measurement
LTE
Switch
 LongDrxCycleForM Long DRX Cycle for BTS3900, BTS3900
CellDrxPara
eas Measurement LTE
 OnDurTimerForMea On Duration Timer BTS3900, BTS3900
CellDrxPara
s for Measurement LTE
 DRX Inactivity
DrxInactTimerForM BTS3900, BTS3900
CellDrxPara Timer for
eas LTE
Measurement
 DRX
DrxReTxTimerForM Retransmission BTS3900, BTS3900
CellDrxPara
eas Timer for LTE
Measurement

ShortDrxSwForMea Short DRX Switch BTS3900, BTS3900

CellDrxPara
s for Measurement LTE
 ShortDrxCycleForM Short DRX Cycle BTS3900, BTS3900
CellDrxPara
eas for Measurement LTE
 ShortCycleTimerFor Short Cycle Timer BTS3900, BTS3900
CellDrxPara
Meas for Measurement LTE
 DrxSrDetectOptSwit SR Detect Optimize BTS3900, BTS3900
CellDrxPara
ch Switch LTE

DrxStartoffsetAdjust DRX StartOffset BTS3900, BTS3900

CellDrxPara
SW Adjust Switch LTE
 Measurement DRX
MeasDrxSpecSchS BTS3900, BTS3900
CellDrxPara Special Schedule
witch LTE
Switch

Coverage based
CovGsmMeasDrxCf GSM Measurement BTS3900, BTS3900
CellDrxPara
gSwitch DRX Configure LTE
Switch

BTS3900, BTS3900
CellHoParaCfg LocalCellId Local cell ID
LTE
 BlindHO A1A2
BlindHoA1A2ThdRs BTS3900, BTS3900
CellHoParaCfg RSRP trigger
rp LTE
threshold
 BlindHO A1A2
BlindHoA1A2ThdRs BTS3900, BTS3900
CellHoParaCfg RSRQ trigger
rq LTE
threshold

High Speed
HighSpeedThreshol BTS3900, BTS3900
CellHoParaCfg Handover
d LTE
Threshold

Handover Mode BTS3900, BTS3900

CellHoParaCfg HoModeSwitch
switch LTE

SRVCC Handover BTS3900, BTS3900

CellHoParaCfg SrvccHoOptSwitch
Optimization Switch LTE
 Uplink Bad Quality
UlBadQualHoMcsT BTS3900, BTS3900
CellHoParaCfg Handover MCS
hd LTE
Threshold

Uplink Bad Quality

UlBadQualHoIblerT BTS3900, BTS3900
CellHoParaCfg Handover IBLER
hd LTE
Threshold

SpeedEvaluatedPer Speed Evaluated BTS3900, BTS3900

CellHoParaCfg
iod Period LTE

SpeedEvaluatedNu HO Num in Speed BTS3900, BTS3900

CellHoParaCfg
m Evaluated Period LTE
 LTE To UTRAN
L2UCsfbMRProMod CSFB BTS3900, BTS3900
CellHoParaCfg
e Measurement LTE
Processing Mode

CSFB
CsfbMRWaitingTim BTS3900, BTS3900
CellHoParaCfg Measurement
er LTE
Waiting Timer

BTS3900, BTS3900
CellMimoParaCfg LocalCellId Local cell ID
LTE
 MimoAdaptiveSwitc MIMO Adaptive BTS3900, BTS3900
CellMimoParaCfg
h Switch LTE
 BTS3900, BTS3900
CellMimoParaCfg FixedMimoMode Fixed MIMO Mode
LTE
 BTS3900, BTS3900
CellMimoParaCfg InitialMimoType Initial Mimo Type
LTE

BTS3900, BTS3900
CellMlbHo LocalCellId Local cell ID
LTE
 IdleUeSelFreqStrat Idle UE Select BTS3900, BTS3900
CellMlbHo
egy Frequency Strategy LTE
 MlbHoInProtectMod Mlb Handover-in BTS3900, BTS3900
CellMlbHo
e Protect Mode LTE
 MlbHoInProtectTim Mlb Handover-in BTS3900, BTS3900
CellMlbHo
er Protect Timer LTE

InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900
CellMlbHo Handover-in A1
1ThdRsrp LTE
RSRP Thd
 InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900
CellMlbHo Handover-in A1
1ThdRsrq LTE
RSRQ Thd

InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900
CellMlbHo Handover-in A2
2ThdRsrp LTE
RSRP Thd
 InterFreq Mlb
InterFreqMlbHoInA BTS3900, BTS3900
CellMlbHo Handover-in A2
2ThdRsrq LTE
RSRQ Thd

Inter-RAT MLB BTS3900, BTS3900

CellMlbHo InterRatMlbStrategy
Strategy LTE

BTS3900, BTS3900
CellPreallocGroup LocalCellId Local cell ID
LTE

Preallocation
PreallocationParaG BTS3900, BTS3900
CellPreallocGroup Parameter Group
roupId LTE
ID
 Preallocation BTS3900, BTS3900
CellPreallocGroup PreallocationSwitch
Switch LTE

SmartPreallocation Smart Preallocation BTS3900, BTS3900

CellPreallocGroup
Switch Switch LTE

PreallocationMinPer Minimal Period of BTS3900, BTS3900

CellPreallocGroup
iod Preallocation LTE

Data Size of BTS3900, BTS3900

CellPreallocGroup PreallocationSize
Preallocation LTE
 SmartPreallocation Smart Preallocation BTS3900, BTS3900
CellPreallocGroup
Duration Duration LTE

BTS3900, BTS3900
CellSrsAdaptiveCfg LocalCellId Local Cell ID
LTE

SRS Period BTS3900, BTS3900

CellSrsAdaptiveCfg SrsPeriodAdaptive
Adaptive Switch LTE
 BTS3900, BTS3900
CellSrsAdaptiveCfg UserSrsPeriod User SRS Period
LTE

CellUeMeasControl BTS3900, BTS3900

LocalCellId Local cell ID
Cfg LTE
 Max Non-Intra Freq
CellUeMeasControl MaxNonIntraMeasO BTS3900, BTS3900
Measurement
Cfg bjNum LTE
Object Number
 Max EUTRAN FDD
CellUeMeasControl MaxEutranFddMea BTS3900, BTS3900
Measure Freq
Cfg sFreqNum LTE
Number
 Max EUTRAN TDD
CellUeMeasControl MaxEutranTddMea BTS3900, BTS3900
Measure Freq
Cfg sFreqNum LTE
Number
 Max UTRAN FDD
CellUeMeasControl MaxUtranFddMeas BTS3900, BTS3900
Measure Freq
Cfg FreqNum LTE
Number
 Max UTRAN TDD
CellUeMeasControl MaxUtranTddMeas BTS3900, BTS3900
Measure Freq
Cfg FreqNum LTE
Number
 Max GERAN
CellUeMeasControl MaxGeranMeasFre BTS3900, BTS3900
Measure Freq
Cfg qNum LTE
Number

BTS3900, BTS3900
CellUlCompAlgo LocalCellId LocalCellId
LTE
 BTS3900, BTS3900
CellUlCompAlgo UlCompA3Offset UlCompA3Offset
LTE

Sfn UL CoMP BTS3900, BTS3900

CellUlCompAlgo SfnUlCompThd
Threshold LTE
 UlCompA3OffsetFo RelaxedBH UL BTS3900, BTS3900
CellUlCompAlgo
rRelaxedBH CoMP A3 Offset LTE

BTS3900, BTS3900
CellUlpcDedic LocalCellId Local cell ID
LTE

Delta-MCS enable BTS3900, BTS3900

CellUlpcDedic DeltaMcsEnabled
or disable indication LTE
 Power Offset of
PSrsOffsetDeltaMc SRS When BTS3900, BTS3900
CellUlpcDedic
sDisable DeltaMcsEnabled LTE
Off

Power Offset of
PSrsOffsetDeltaMc SRS When BTS3900, BTS3900
CellUlpcDedic
sEnable DeltaMcsEnabled LTE
On
 RSRP filtering BTS3900, BTS3900
CellUlpcDedic FilterRsrp
coefficient LTE

BTS3900, BTS3900
DistBasedHO LocalCellId Local cell ID
LTE

Distance-based
DistBasedMeasObj BTS3900, BTS3900
DistBasedHO Measurement
Type LTE
Object Type
 Distance-based
BTS3900, BTS3900
DistBasedHO DistBasedHOThd Handover
LTE
Threshold

BTS3900, BTS3900
DrxParaGroup LocalCellId Local cell ID
LTE

DRX parameter BTS3900, BTS3900

DrxParaGroup DrxParaGroupId
group ID LTE
 BTS3900, BTS3900
DrxParaGroup EnterDrxSwitch Enter DRX Switch
LTE
 BTS3900, BTS3900
DrxParaGroup OnDurationTimer On Duration Timer
LTE
 DRX Inactivity BTS3900, BTS3900
DrxParaGroup DrxInactivityTimer
Timer LTE
 DRX
BTS3900, BTS3900
DrxParaGroup DrxReTxTimer Retransmission
LTE
Timer
 BTS3900, BTS3900
DrxParaGroup LongDrxCycle Long DRX Cycle
LTE

Short-cycle DRX
BTS3900, BTS3900
DrxParaGroup SupportShortDrx supported
LTE
indication
 BTS3900, BTS3900
DrxParaGroup ShortDrxCycle Short DRX Cycle
LTE
 DRX Short Cycle BTS3900, BTS3900
DrxParaGroup DrxShortCycleTimer
Timer LTE

BTS3900, BTS3900
GeranInterfArfcn LocalCellId Local cell ID
LTE

Interference
InterfGeranCellBcc BTS3900, BTS3900
GeranInterfArfcn GERAN BCCH
hArfcn LTE
ARFCN

Interference
InterfGeranCarBan BTS3900, BTS3900
GeranInterfArfcn GERAN Frequency
dInd LTE
Band Indicator

InterRatHoCommGr BTS3900, BTS3900

LocalCellId Local cell ID
oup LTE
InterRatHoCommGr InterRatHoCommGr InterRAT handover BTS3900, BTS3900
oup oupId common group ID LTE

InterRatHoCommGr InterRatHoA1A2Hy InterRAT A1A2 BTS3900, BTS3900

oup st hysteresis LTE
InterRatHoCommGr InterRatHoA1A2Tim InterRAT A1A2 time BTS3900, BTS3900
oup eToTrig to trigger LTE

InterRatHoCommGr InterRatHoA1ThdR InterRAT A1 RSRP BTS3900, BTS3900

oup srp trigger threshold LTE

InterRatHoCommGr InterRatHoA1ThdR InterRAT A1 RSRQ BTS3900, BTS3900

oup srq trigger threshold LTE
InterRatHoCommGr InterRatHoA2ThdR InterRAT A2 RSRP BTS3900, BTS3900
oup srp trigger threshold LTE

InterRatHoCommGr InterRatHoA2ThdR InterRAT A2 RSRQ BTS3900, BTS3900

oup srq trigger threshold LTE
InterRatHoCommGr GERAN B2 RSRP BTS3900, BTS3900
GeranB2Thd1Rsrp
oup Threshold 1 LTE

InterRatHoCommGr GERAN B2 RSRQ BTS3900, BTS3900

GeranB2Thd1Rsrq
oup Threshold 1 LTE
InterRatHoCommGr UTRAN B2 RSRP BTS3900, BTS3900
UtranB2Thd1Rsrp
oup Threshold 1 LTE

InterRatHoCommGr UTRAN B2 RSRQ BTS3900, BTS3900

UtranB2Thd1Rsrq
oup Threshold 1 LTE
InterRatHoCdma1x BTS3900, BTS3900
LocalCellId Local cell ID
RttGroup LTE

InterRAT handover
InterRatHoCdma1x InterRatHoCdma1x to BTS3900, BTS3900
RttGroup RttGroupId CDMA20001xRTT LTE
group ID

CDMA20001XRTT
InterRatHoCdma1x InterRatHoCdmaB1 BTS3900, BTS3900
handover
RttGroup Hyst LTE
hysteresis
 CoverageBased
InterRatHoCdma1x InterRatHoCdmaB1 BTS3900, BTS3900
CDMA20001XRTT
RttGroup ThdPs LTE
trigger threshold

InterRatHoCdma1x InterRatHoCdmaB1 CDMA20001XRTT BTS3900, BTS3900

RttGroup TimeToTrig time to trigger LTE

Load Service
InterRatHoCdma1x LdSvBasedHoCdm Based BTS3900, BTS3900
RttGroup aB1ThdPs CDMA20001XRTT LTE
trigger threshold

RlfTimerConstGrou BTS3900, BTS3900

LocalCellId Local cell ID
p LTE

RlfTimerConstGrou RlfTimerConstGrou RLF timer and BTS3900, BTS3900

p pId constants group ID LTE
RlfTimerConstGrou BTS3900, BTS3900
T301 Timer 301
p LTE

RlfTimerConstGrou BTS3900, BTS3900

T310 Timer 310
p LTE
RlfTimerConstGrou BTS3900, BTS3900
T311 Timer 311
p LTE

RlfTimerConstGrou BTS3900, BTS3900

N310 Constant N310
p LTE

RlfTimerConstGrou BTS3900, BTS3900

N311 Constant N311
p LTE

BTS3900, BTS3900
CellExtendedQci ExtendedQci Extended QCI
LTE

BTS3900, BTS3900
CellExtendedQci LocalCellId Local cell ID
LTE

InterFreqHoGroupI Interfreq handover BTS3900, BTS3900

CellExtendedQci
d group ID LTE

InterRAT handover
InterRatHoCdma1x to BTS3900, BTS3900
CellExtendedQci
RttGroupId CDMA20001xRTT LTE
group ID
 InterRAT handover
InterRatHoCdmaHr to BTS3900, BTS3900
CellExtendedQci
pdGroupId CDMA2000HRPD LTE
group ID

InterRatHoCommGr InterRAT handover BTS3900, BTS3900

CellExtendedQci
oupId common group ID LTE

InterRatHoGeranGr InterRAT handover BTS3900, BTS3900

CellExtendedQci
oupId to GERAN group ID LTE

InterRatHoUtranGro InterRAT handover BTS3900, BTS3900

CellExtendedQci
upId to UTRAN Group ID LTE

IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900

CellExtendedQci
d group ID LTE

DRX parameter BTS3900, BTS3900

CellExtendedQci DrxParaGroupId
group ID LTE

RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900

CellExtendedQci
d constants indication LTE

RlfTimerConstGrou RLF timer and BTS3900, BTS3900

CellExtendedQci
pId constants group ID LTE
 Traffic Release BTS3900, BTS3900
CellExtendedQci TrafficRelDelay
Delay LTE

BTS3900, BTS3900
CellStandardQci LocalCellId Local cell ID
LTE

QoS Class BTS3900, BTS3900

CellStandardQci Qci
Indication LTE

InterFreqHoGroupI Interfreq handover BTS3900, BTS3900

CellStandardQci
d group ID LTE

InterRAT handover
InterRatHoCdma1x to BTS3900, BTS3900
CellStandardQci
RttGroupId CDMA20001xRTT LTE
group ID
 InterRAT handover
InterRatHoCdmaHr to BTS3900, BTS3900
CellStandardQci
pdGroupId CDMA2000HRPD LTE
group ID

InterRatHoCommGr InterRAT handover BTS3900, BTS3900

CellStandardQci
oupId common group ID LTE

InterRatHoGeranGr InterRAT handover BTS3900, BTS3900

CellStandardQci
oupId to GERAN group ID LTE

InterRatHoUtranGro InterRAT handover BTS3900, BTS3900

CellStandardQci
upId to UTRAN Group ID LTE

IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900

CellStandardQci
d group ID LTE

DRX parameter BTS3900, BTS3900

CellStandardQci DrxParaGroupId
group ID LTE

BTS3900, BTS3900
CellStandardQci SriPeriod SRI Period
LTE

RlfTimerConstCfgIn RLF timer and BTS3900, BTS3900

CellStandardQci
d constants indication LTE
 RlfTimerConstGrou RLF timer and BTS3900, BTS3900
CellStandardQci
pId constants group ID LTE

Traffic Release BTS3900, BTS3900

CellStandardQci TrafficRelDelay
Delay LTE

QCI priority for BTS3900, BTS3900

CellStandardQci QciPriorityForHo
handover LTE

BTS3900, BTS3900
CellStandardQci MlbQciGroupId Mlb Qci Group ID
LTE
 Preallocaiton
PreallocationParaG BTS3900, BTS3900
CellStandardQci Parameter Group
roupId LTE
ID

QCI Priority For BTS3900, BTS3900

CellStandardQci QciPriorityForDrx
DRX LTE

QCI Algorithm BTS3900, BTS3900

CellStandardQci QciAlgoSwitch
Switch LTE

InterRatHoCdmaHr BTS3900, BTS3900

LocalCellId Local cell ID
pdGroup LTE

InterRAT handover
InterRatHoCdmaHr InterRatHoCdmaHr to BTS3900, BTS3900
pdGroup pdGroupId CDMA2000HRPD LTE
group ID
 CDMA2000HRPD
InterRatHoCdmaHr InterRatHoCdmaB1 BTS3900, BTS3900
handover
pdGroup Hyst LTE
hysteresis

CoverageBased
InterRatHoCdmaHr InterRatHoCdmaB1 BTS3900, BTS3900
CDMA2000HRPD
pdGroup ThdPs LTE
trigger threshold

InterRatHoCdmaHr InterRatHoCdmaB1 CDMA2000HRPD BTS3900, BTS3900

pdGroup TimeToTrig time to trigger LTE
 Load Service
InterRatHoCdmaHr LdSvBasedHoCdm Based BTS3900, BTS3900
pdGroup aB1ThdPs CDMA2000HRPD LTE
trigger threshold

Cdma2000 HRPD
InterRatHoCdmaHr Cdma2000HrpdB2T Optimized BTS3900, BTS3900
pdGroup hd1Rsrp handover B2 RSRP LTE
thld1

Cdma2000 HRPD
InterRatHoCdmaHr Cdma2000HrpdB2T Optimized BTS3900, BTS3900
pdGroup hd1Rsrq handover B2 RSRQ LTE
thld1

Cdma2000 HRPD
InterRatHoCdmaHr Cdma2000HrpdNon BTS3900, BTS3900
Non Optimized HO
pdGroup B2ThdRsrp LTE
B2 RSRP Thd

Cdma2000 HRPD
InterRatHoCdmaHr Cdma2000HrpdNon BTS3900, BTS3900
Non Optimized HO
pdGroup B2ThdRsrq LTE
B2 RSRQ Thd
InterRatHoGeranGr BTS3900, BTS3900
LocalCellId Local cell ID
oup LTE

InterRatHoGeranGr InterRatHoGeranGr InterRAT handover BTS3900, BTS3900

oup oupId to GERAN group ID LTE

InterRatHoGeranGr InterRatHoGeranB1 GERAN handover BTS3900, BTS3900

oup Hyst hysteresis LTE

CoverageBased
InterRatHoGeranGr InterRatHoGeranB1 BTS3900, BTS3900
GERAN trigger
oup Thd LTE
threshold
InterRatHoGeranGr InterRatHoGeranB1 GERAN time to BTS3900, BTS3900
oup TimeToTrig trigger LTE

Load Service
InterRatHoGeranGr LdSvBasedHoGera Based Geran BTS3900, BTS3900
oup nB1Thd EventB1 trigger LTE
threshold

InterRatHoUtranGro BTS3900, BTS3900

LocalCellId Local cell ID
up LTE

InterRatHoUtranGro InterRatHoUtranGro InterRAT handover BTS3900, BTS3900

up upId to UTRAN Group ID LTE

CoverageBased
InterRatHoUtranGro InterRatHoUtranB1 BTS3900, BTS3900
UTRAN ECN0
up ThdEcn0 LTE
trigger threshold
 CoverageBased
InterRatHoUtranGro InterRatHoUtranB1 BTS3900, BTS3900
UTRAN RSCP
up ThdRscp LTE
trigger threshold

InterRatHoUtranGro InterRatHoUtranB1 UTRAN handover BTS3900, BTS3900

up Hyst hysteresis LTE

InterRatHoUtranGro InterRatHoUtranB1 UTRAN time to BTS3900, BTS3900

up TimeToTrig trigger LTE
 Load Service
InterRatHoUtranGro LdSvBasedHoUtran BTS3900, BTS3900
Based UTRANB1
up B1ThdEcn0 LTE
ECN0 threshold

Load Service
InterRatHoUtranGro LdSvBasedHoUtran Based UTRAN BTS3900, BTS3900
up B1ThdRscp EventB1 RSCP LTE
trigger threshold
 BTS3900, BTS3900
CaGroupSCellCfg LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CaGroupSCellCfg SCelleNodeBId SCell eNodeB ID
LTE
 BTS3900, BTS3900
CaGroupSCellCfg SCellLocalCellId SCell Local Cell ID
LTE

SCell Blind BTS3900, BTS3900

CaGroupSCellCfg SCellBlindCfgFlag
Configuration Flag LTE
 BTS3900, BTS3900
CaGroupSCellCfg SCellPriority SCell Priority
LTE

BTS3900, BTS3900
CaGroupSCellCfg SCellA4Offset SCell A4 Offset
LTE
 BTS3900, BTS3900
CaGroupSCellCfg SCellA2Offset SCell A2 Offset
LTE

BTS3900, BTS3900
CellMcPara LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellMcPara A3Offset A3 Offset
LTE

BTS3900, BTS3900
CellMcPara Hysteresis Hysteresis
LTE
 BTS3900, BTS3900
CellMcPara TimetoTrigger Time to Trigger
LTE

Max Report Cell BTS3900, BTS3900

CellMcPara MaxReportCells
Number LTE

BTS3900, BTS3900
CellMcPara ReportAmount Report Amount
LTE
 BTS3900, BTS3900
CellMcPara ReportInterval Report Interval
LTE

BTS3900, BTS3900
CellMcPara ReportQuantity Reoprt Quantity
LTE

BTS3900, BTS3900
CellMcPara TriggerQuantity Trigger Quantity
LTE
 BTS3900, BTS3900
CellMcPara A6Offset A6 Offset
LTE

IntraFreq Period
IntraFreqMaxReport BTS3900, BTS3900
CellMcPara MR Max Report
Cells LTE
Cell

IntraFreqTriggerQu IntraFreq Period BTS3900, BTS3900

CellMcPara
antity MR Trigger Quantity LTE
 IntraFreqReportQu IntraFreq Period BTS3900, BTS3900
CellMcPara
antity MR Report Quantity LTE

InterFreq Period
InterFreqMaxReport BTS3900, BTS3900
CellMcPara MR Max Report
Cells LTE
Cell
 InterFreqTriggerQu InterFreq Period BTS3900, BTS3900
CellMcPara
antity MR Trigger Quantity LTE

InterFreqReportQu InterFreq Period BTS3900, BTS3900

CellMcPara
antity MR Report Quantity LTE

BTS3900, BTS3900
InterFreqHoGroup LocalCellId Local cell ID
LTE

InterFreqHoGroupI Interfreq handover BTS3900, BTS3900

InterFreqHoGroup
d group ID LTE
 InterFreqHoA1A2H Interfreq A1A2 BTS3900, BTS3900
InterFreqHoGroup
yst hysteresis LTE

InterFreqHoA1A2Ti Interfreq A1A2 time BTS3900, BTS3900

InterFreqHoGroup
meToTrig to trigger LTE
 A4A5 Based
InterFreqHoA1Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRP
Rsrp LTE
Threshold

A4A5 Based
InterFreqHoA1Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRQ
Rsrq LTE
Threshold
 A4A5 Based
InterFreqHoA2Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRP
Rsrp LTE
Threshold

A4A5 Based
InterFreqHoA2Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRQ
Rsrq LTE
Threshold
 Interfreq handover BTS3900, BTS3900
InterFreqHoGroup InterFreqHoA4Hyst
hysteresis LTE

CoverageBased
InterFreqHoA4Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRP
Rsrp LTE
threshold
 CoverageBased
InterFreqHoA4Thd BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRQ
Rsrq LTE
threshold

InterFreqHoA4Time Interfreq HandOver BTS3900, BTS3900

InterFreqHoGroup
ToTrig Time to Trigger LTE

Load Based
InterFreqLoadBase BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRP
dHoA4ThdRsrp LTE
threshold
 Load Based
InterFreqLoadBase BTS3900, BTS3900
InterFreqHoGroup Interfreq RSRQ
dHoA4ThdRsrq LTE
threshold

Freq Priority Based

FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRP
A1ThdRsrp LTE
threshold

Freq Priority Based

FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A1 RSRQ
A1ThdRsrq LTE
threshold

InterFreqHoA3Offse BTS3900, BTS3900

InterFreqHoGroup Interfreq A3 offset
t LTE
 A3InterFreqHoA1T A3 based interfreq BTS3900, BTS3900
InterFreqHoGroup
hdRsrp A1 RSRP threshold LTE

A3InterFreqHoA2T A3 based Interfreq BTS3900, BTS3900

InterFreqHoGroup
hdRsrp A2 RSRP threshold LTE

Freq Priority Based

FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRP
A2ThdRsrp LTE
threshold

Freq Priority Based

FreqPriInterFreqHo BTS3900, BTS3900
InterFreqHoGroup Interfreq A2 RSRQ
A2ThdRsrq LTE
threshold
 InterFreq MLB
InterFreqMlbA1A2T BTS3900, BTS3900
InterFreqHoGroup A1A2 RSRP
hdRsrp LTE
Threshold

InterFreqHoA5Thd1 Interfreq A5 RSRP BTS3900, BTS3900

InterFreqHoGroup
Rsrp threshold 1 LTE
 InterFreqHoA5Thd1 Interfreq A5 RSRQ BTS3900, BTS3900
InterFreqHoGroup
Rsrq threshold 1 LTE

Service-Request
SrvReqHoA4ThdRs BTS3900, BTS3900
InterFreqHoGroup based handover A4
rp LTE
RSRP threshold
 Service-Request
SrvReqHoA4ThdRs BTS3900, BTS3900
InterFreqHoGroup based handover A4
rq LTE
RSRQ threshold
 MLB Inter-Freq
MlbInterFreqHoA5T BTS3900, BTS3900
InterFreqHoGroup Handover A5
hd1Rsrp LTE
Threshold1 RSRP
 MLB Inter-Freq
MlbInterFreqHoA5T BTS3900, BTS3900
InterFreqHoGroup Handover A5
hd1Rsrq LTE
Threshold1 RSRQ
 UlBadQualHoA4Off Uplink Bad Quality BTS3900, BTS3900
InterFreqHoGroup
set Handover A4 Offset LTE

A3 Based Interfreq
A3InterFreqHoA1T BTS3900, BTS3900
InterFreqHoGroup A1 RSRQ
hdRsrq LTE
Threshold

A3 Based Interfreq
A3InterFreqHoA2T BTS3900, BTS3900
InterFreqHoGroup A2 RSRQ
hdRsrq LTE
Threshold
 Ul High Traffic
UlHeavyTrafficMlbA BTS3900, BTS3900
InterFreqHoGroup Handover A4
4ThdRsrp LTE
Threshold of RSRP

Ul High Traffic
UlHeavyTrafficMlbA BTS3900, BTS3900
InterFreqHoGroup Handover A4
4ThdRsrq LTE
Threshold of RSRQ

BTS3900, BTS3900
IntraFreqHoGroup LocalCellId Local cell ID
LTE

IntraFreqHoGroupI Intrafreq handover BTS3900, BTS3900

IntraFreqHoGroup
d group ID LTE
 Intrafreq handover BTS3900, BTS3900
IntraFreqHoGroup IntraFreqHoA3Hyst
hysteresis LTE

IntraFreqHoA3Offse Intrafreq handover BTS3900, BTS3900

IntraFreqHoGroup
t offset LTE

IntraFreqHoA3Time Intrafreq handover BTS3900, BTS3900

IntraFreqHoGroup
ToTrig time to trigger LTE
eNBCellQciRsvdPa BTS3900, BTS3900
LocalCellId Local cell ID
ra LTE

eNBCellQciRsvdPa QoS Class BTS3900, BTS3900

Qci
ra Indication LTE

eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900

RsvdSwPara0
ra Parameter 0 LTE
eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900
RsvdSwPara1
ra Parameter 1 LTE
eNBCellQciRsvdPa Reserved Switch BTS3900, BTS3900
RsvdSwPara2
ra Parameter 2 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara2
ra Parameter 2 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara3
ra Parameter 3 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara4
ra Parameter 4 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara5
ra Parameter 5 LTE
eNBCellQciRsvdPa Reserved BTS3900, BTS3900
RsvdPara6
ra Parameter 6 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara7
ra Parameter 7 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara8
ra Parameter 8 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara9
ra Parameter 9 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara10
ra Parameter 10 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara11
ra Parameter 11 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara12
ra Parameter 12 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara13
ra Parameter 13 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara14
ra Parameter 14 LTE
eNBCellQciRsvdPa Reserved BTS3900, BTS3900
RsvdPara15
ra Parameter 15 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara16
ra Parameter 16 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara17
ra Parameter 17 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara18
ra Parameter 18 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara19
ra Parameter 19 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara20
ra Parameter 20 LTE

eNBCellQciRsvdPa Reserved BTS3900, BTS3900

RsvdPara21
ra Parameter 21 LTE

BTS3900, BTS3900
CnOperator CnOperatorId CN Operator ID
LTE
 BTS3900, BTS3900
CnOperator CnOperatorName CN Operator name
LTE

BTS3900, BTS3900
CnOperator CnOperatorType CN Operator type
LTE

Mobile country BTS3900, BTS3900

CnOperator Mcc
code LTE

Mobile network BTS3900, BTS3900

CnOperator Mnc
code LTE

BTS3900, BTS3900
CnOperatorIpPath IpPathId IP path ID
LTE

BTS3900, BTS3900
CnOperatorIpPath CnOperatorId CN Operator ID
LTE

Local tracking area BTS3900, BTS3900

CnOperatorTa TrackingAreaId
ID LTE
 BTS3900, BTS3900
CnOperatorTa CnOperatorId CN Operator ID
LTE

BTS3900, BTS3900
CnOperatorTa Tac Tracking area code
LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

CnOpSharingGroup
Id Sharing Group ID LTE

BTS3900, BTS3900
CnOpSharingGroup PrimaryOperatorId Primary Operator ID
LTE

SecondaryOperator Secondary BTS3900, BTS3900

CnOpSharingGroup
List Operator List LTE

SecondaryOpIdTyp
Secondary BTS3900, BTS3900
CnOpSharingGroup e.SecondaryOperat
Operator Id LTE
orId
 BTS3900, BTS3900
Emc CnOperatorId CN Operator ID
LTE

Emergency call BTS3900, BTS3900

Emc EmcEnable
enabled switch LTE
 Emergency call
EmcEnableInLimite BTS3900, BTS3900
Emc enabled switch in
dMode LTE
limited mode
 EmcDedicatedBear The ARP of EMC BTS3900, BTS3900
Emc
erARP dedicated bearer LTE
 EmcDefaultBearerA The ARP of EMC BTS3900, BTS3900
Emc
RP default bearer LTE

eNodeBChrOutput BTS3900, BTS3900

OutPutMode CHR Output Mode
Ctrl LTE

eNodeBChrOutput Sample Rate of BTS3900, BTS3900

CallSampleRate
Ctrl Abnormal Call LTE
eNodeBChrOutput BTS3900, BTS3900
MaxStoreCall Max Store Call
Ctrl LTE

eNodeBChrOutput CHRUpLoadingTim CHR UpLoading BTS3900, BTS3900

Ctrl eSwitch Time Switch LTE

ENodeBSharingMo ENodeBSharingMo eNodeB sharing BTS3900, BTS3900

de de mode LTE

The Switch of X2 BTS3900, BTS3900

GlobalProcSwitch X2SonSetupSwitch
setup by SON LTE

X2SonLinkSetupTy The method of X2 BTS3900, BTS3900

GlobalProcSwitch
pe setup by SON LTE

BTS3900, BTS3900
GlobalProcSwitch SriAdaptiveSwitch SRI adaptive switch
LTE
 BTS3900, BTS3900
GlobalProcSwitch LcgProfile LCG Profile
LTE

RncPoolHoRimSwit RNC POOL HO BTS3900, BTS3900

GlobalProcSwitch
ch RIM Switch LTE

UU Message
UuMsgSimulSendS BTS3900, BTS3900
GlobalProcSwitch Simultaneous
witch LTE
Sending Switch
 Update eNB
X2BasedUptENode BTS3900, BTS3900
GlobalProcSwitch Configuration Via
BCfgSwitch LTE
X2 Switch

X2 Auto Setup
TargetOpBasedX2S BTS3900, BTS3900
GlobalProcSwitch Switch Via Target
witch LTE
Operator

X2SonTNLSelectM X2 Son TNL Select BTS3900, BTS3900

GlobalProcSwitch
ode Mode LTE

Choose UMTS Cell

UtranLoadTransCh BTS3900, BTS3900
GlobalProcSwitch Load Info Trans
an LTE
Channel
 S1 handover in
S1HoInDataFwdSwi BTS3900, BTS3900
GlobalProcSwitch data forwarding
tch LTE
switch

RrcReestProtectTh RRC Reest Protect BTS3900, BTS3900

GlobalProcSwitch
d Threshold LTE
 The Timer of X2 BTS3900, BTS3900
GlobalProcSwitch X2SonDeleteTimer
delete by SON LTE

BTS3900, BTS3900
GlobalProcSwitch RimCodingPolicy RIM Coding Policy
LTE
 L2GU Handover
L2GUHoWithLCapS BTS3900, BTS3900
GlobalProcSwitch Required With LTE
witch LTE
Cap Switch
 Different Operator
DiffOpWithSameM BTS3900, BTS3900
GlobalProcSwitch With Same MMEC
mecSwitch LTE
Switch

Peer Request
PeerReqBasedX2D BTS3900, BTS3900
GlobalProcSwitch Based X2 Delete
elSwitch LTE
Switch

Receive status of
UlPdcpSduRcvStat BTS3900, BTS3900
GlobalProcSwitch UL PDCP SDUs
SendSwitch LTE
sending switch
 ProtocolMsgOptSwi Protocol Message BTS3900, BTS3900
GlobalProcSwitch
tch Optimization Switch LTE
 Delete Ncell
X2BasedDelNcellCf BTS3900, BTS3900
GlobalProcSwitch Configuration Via
gSwitch LTE
X2 Switch

BTS3900, BTS3900
GlobalProcSwitch X2ServedCellType X2 served cell type
LTE
 eNB Triggered
EnbTrigMmeLoadR BTS3900, BTS3900
GlobalProcSwitch MME load re-
ebalSwitch LTE
balance switch

Ue Release
BTS3900, BTS3900
GlobalProcSwitch UeRelReSynTimes Resynchronization
LTE
Times
 UeRelChkLostSwitc Ue Release Check BTS3900, BTS3900
GlobalProcSwitch
h Lost Switch LTE

UeLinkAbnormalDet UE Link Abnormal BTS3900, BTS3900

GlobalProcSwitch
ectSwitch Detect Switch LTE
 S1DefaultPagingDr S1 Default Paging BTS3900, BTS3900
GlobalProcSwitch
xSelect DRX Value Select LTE

Enhanced PHR
EnhancedPhrRptCt BTS3900, BTS3900
GlobalProcSwitch Report Control
rlSw LTE
Switch
 EutranLoadTransS EUTRAN Load BTS3900, BTS3900
GlobalProcSwitch
witch Transfer Switch LTE

ProtocolSupportSwi Protocol Procedure BTS3900, BTS3900

GlobalProcSwitch
tch Support Switch LTE
 CellTrafficTraceMsg Cell Traffic Trace BTS3900, BTS3900
GlobalProcSwitch
Switch Message Switch LTE

Prefer Signal BTS3900, BTS3900

GlobalProcSwitch PreferSigExtend
Extend Switch LTE

MmeSelectProcSwit MME Select BTS3900, BTS3900

GlobalProcSwitch
ch Procedure Switch LTE

S1OfflineCommitSw S1 Offline Commit BTS3900, BTS3900

GlobalProcSwitch
itch Switch LTE
 ProtocolCompatibilit Protocol BTS3900, BTS3900
GlobalProcSwitch
ySw Compatibility Switch LTE

X2 Sctp BTS3900, BTS3900

GlobalProcSwitch X2SctpEstType
Establishment Type LTE
 X2 SON Delete BTS3900, BTS3900
GlobalProcSwitch X2SonDeleteSwitch
Switch LTE
 X2SonDeleteTimerf X2 SON Delete BTS3900, BTS3900
GlobalProcSwitch
orX2Fault Timer for X2 Fault LTE
 X2SonDeleteTimerf X2 SON Delete BTS3900, BTS3900
GlobalProcSwitch
orX2Usage Timer for X2 Usage LTE
 X2 SON Delete Ho
X2SonDeleteHoInN BTS3900, BTS3900
GlobalProcSwitch In Number
umThd LTE
Threshold
 X2 SON Delete Ho
X2SonDeleteHoOut BTS3900, BTS3900
GlobalProcSwitch Out Number
NumThd LTE
Threshold
 VoIP With Gap BTS3900, BTS3900
GlobalProcSwitch VoipWithGapMode
Mode LTE

IntraEnodebHoStati Intra-eNodeB HO BTS3900, BTS3900

GlobalProcSwitch
cSw Static Switch LTE
 Maximum Sync-
MaxSyncUserNum BTS3900, BTS3900
GlobalProcSwitch User Number Per
PerBbi LTE
BBI

X2SetupFailureTim X2 Setup Failure BTS3900, BTS3900

GlobalProcSwitch
etoWait TimetoWait LTE
 X2SetupFailureNu X2 Setup Failure BTS3900, BTS3900
GlobalProcSwitch
mThd Num Threshold LTE
 X2SetupFailureNu X2 Setup Failure BTS3900, BTS3900
GlobalProcSwitch
mTimer Num Timer LTE
 eX2AutoDeleteSwit eX2 Auto Delete BTS3900, BTS3900
GlobalProcSwitch
ch Switch LTE
 eX2AutoDeleteTime eX2 Auto Delete BTS3900, BTS3900
GlobalProcSwitch
rforFault Timer for eX2 Fault LTE

X2 SON Delete BTS3900, BTS3900

GlobalProcSwitch X2SonDeleteMode
Mode LTE
 X2SonSetupNumTh X2 SON Setup BTS3900, BTS3900
GlobalProcSwitch
d Num Threshold LTE
 X2 SON Setup BTS3900, BTS3900
GlobalProcSwitch X2SonSetupTimer
Timer LTE

SecKeyRecfgSwitc Security Key Recfg BTS3900, BTS3900

GlobalProcSwitch
h after X2 Ho Switch LTE
 Update eNB
X2BasedUptENode BTS3900, BTS3900
GlobalProcSwitch Configuration Via
BPolicy LTE
X2 Policy

RRC Connection BTS3900, BTS3900

GlobalProcSwitch RrcConnPunishThd
Punish Threshold LTE
 QciUpdParaCheckS QCI Upd Para BTS3900, BTS3900
GlobalProcSwitch
witch Check Switch LTE
 Ue Compatibility BTS3900, BTS3900
GlobalProcSwitch UeCompatSwitch
Switch LTE

S1MmePrivFeatureI S1 MME Private BTS3900, BTS3900

GlobalProcSwitch
nd Feature Indicator LTE
 SctpAbortSmoothS SCTP Link Abort BTS3900, BTS3900
GlobalProcSwitch
witch Smooth Switch LTE

LicenseSharingPoli BTS3900, BTS3900

CnOperatorId CN Operator ID
cy LTE

The proportion of
LicenseSharingPoli BTS3900, BTS3900
MaxUserNumRate the maximum
cy LTE
number of users

The proportion of
LicenseSharingPoli UserNumSharingRa BTS3900, BTS3900
the sharing number
cy te LTE
of users

BTS3900, BTS3900
MBMSPara MBSFNAreaId MBSFN Area ID
LTE
 Synchronisation BTS3900, BTS3900
MBMSPara SyncPeriod
Period LTE

Cell Reservation BTS3900, BTS3900

MBMSPara CellReservationInfo
Info LTE

BTS3900, BTS3900
MBMSPara LocalCellId Local Cell ID
LTE

MBMS Control BTS3900, BTS3900

MBMSPara MbmsCtrlSwitch
Switch LTE

BTS3900, BTS3900
MlbQciGroup MlbQciGroupId Mlb Qci Group ID
LTE

Uplink Minimum BTS3900, BTS3900

MlbQciGroup UlMinQoSBitRate
Qos Bit Rate LTE
 Downlink Minimum BTS3900, BTS3900
MlbQciGroup DlMinQoSBitRate
Qos Bit Rate LTE

S1 reestablish min BTS3900, BTS3900

S1ReestTimer S1ReestMinTimer
timer length LTE

S1 reestablish max BTS3900, BTS3900

S1ReestTimer S1ReestMaxTimer
timer length LTE

BTS3900, BTS3900
eNBCnOpRsvdPara CnOperatorId CN Operator ID
LTE
 Reserved Switch BTS3900, BTS3900
eNBCnOpRsvdPara RsvdSwPara0
Parameter 0 LTE
 Reserved Switch BTS3900, BTS3900
eNBCnOpRsvdPara RsvdSwPara1
Parameter 1 LTE
 Reserved Switch BTS3900, BTS3900
eNBCnOpRsvdPara RsvdSwPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara4
Parameter 4 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara5
Parameter 5 LTE
 Reserved BTS3900, BTS3900
eNBCnOpRsvdPara RsvdPara6
Parameter 6 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara7
Parameter 7 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara8
Parameter 8 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara9
Parameter 9 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara10
Parameter 10 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara11
Parameter 11 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara12
Parameter 12 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara13
Parameter 13 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara14
Parameter 14 LTE
 Reserved BTS3900, BTS3900
eNBCnOpRsvdPara RsvdPara15
Parameter 15 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara16
Parameter 16 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara17
Parameter 17 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara18
Parameter 18 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara19
Parameter 19 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara20
Parameter 20 LTE

Reserved BTS3900, BTS3900

eNBCnOpRsvdPara RsvdPara21
Parameter 21 LTE

BTS3900, BTS3900
ChrOutputMode ModeNo Mode Number
LTE

CHR Detail Cause BTS3900, BTS3900

ChrOutputMode ChrDetailCauseVal
Value LTE
 CHR Hierarchical BTS3900, BTS3900
ChrOutputMode ChrHierOutMode
Output Mode LTE

CHR Output BTS3900, BTS3900

ChrOutputMode SamplingEnable
Sampling Indicator LTE

BTS3900, BTS3900
ECO EcoId ECO ID
LTE

End Point Group BTS3900, BTS3900

ECO EpGroupCfgFlag
Config Flag LTE

Control Plane End BTS3900, BTS3900

ECO CpEpGroupId
Point Group ID LTE

User Plane End BTS3900, BTS3900

ECO UpEpGroupId
Point Group ID LTE

BTS3900, BTS3900
ECO UserLabel User Label
LTE

ECO Interface CP BTS3900, BTS3900

ECO EcoCpBearerId
Bearer ID LTE

ECO Interface CP BTS3900, BTS3900

ECO EcoCpBearerState
Bearer State LTE

BTS3900, BTS3900
eNodeBPath IpPathId IP Path ID
LTE
 BTS3900, BTS3900
eNodeBPath AppType Application Type
LTE

BTS3900, BTS3900
eNodeBPath S1InterfaceId S1 Interface ID
LTE

BTS3900, BTS3900
eNodeBPath X2InterfaceId X2 Interface ID
LTE

BTS3900, BTS3900
M1 M1Id M1 ID
LTE

M1 End Point BTS3900, BTS3900

M1 M1EpGroupId
Group ID LTE

BTS3900, BTS3900
M1 UserLabel User Label
LTE

BTS3900, BTS3900
M2 M2Id M2 ID
LTE

M2 End Point BTS3900, BTS3900

M2 M2EpGroupId
Group ID LTE
 BTS3900, BTS3900
M2 UserLabel User Label
LTE

M2 Interface CP BTS3900, BTS3900

M2 M2CpBearerId
Bearer ID LTE

M2 Interface CP BTS3900, BTS3900

M2 M2CpBearerState
Bearer State LTE

BTS3900, BTS3900
M2 M2InterfaceState M2 Interface State
LTE

M2 Interface BTS3900, BTS3900

M2 M2SessionNum
Session Number LTE

BTS3900, BTS3900
M2 MceName MCE Name
LTE

BTS3900, BTS3900
M2 GlobalMceId GlobalMceId
LTE

M2InterfaceFaultRe M2InterfaceFaultRe BTS3900, BTS3900

M2
ason ason LTE

M2 Interface BTS3900, BTS3900

M2 M2SessionTMGI
Session TMGI LTE

BTS3900, BTS3900
S1 S1Id S1 ID
LTE
 BTS3900, BTS3900
S1 CnOperatorId CN Operator ID
LTE

Control Plane End BTS3900, BTS3900

S1 CpEpGroupId
Point Group ID LTE

User Plane End BTS3900, BTS3900

S1 UpEpGroupId
Point Group ID LTE

BTS3900, BTS3900
S1 MmeRelease MME Release
LTE

BTS3900, BTS3900
S1 UserLabel User Label
LTE

End Point Group BTS3900, BTS3900

S1 EpGroupCfgFlag
Config Flag LTE
 MME Selection BTS3900, BTS3900
S1 Priority
Priority LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

S1
Id Sharing Group ID LTE

BTS3900, BTS3900
S1 S1InterfaceId S1 Interface ID
LTE

BTS3900, BTS3900
S1 S1InterfaceState S1 Interface State
LTE

S1 Interface Is BTS3900, BTS3900

S1 S1InterfaceIsBlock
Block LTE

S1 Interface CP BTS3900, BTS3900

S1 S1CpBearerId
Bearer ID LTE

S1 Interface CP BTS3900, BTS3900

S1 S1CpBearerState
Bearer State LTE
 BTS3900, BTS3900
S1Interface S1InterfaceId S1 Interface ID
LTE

S1 Interface CP BTS3900, BTS3900

S1Interface S1CpBearerId
Bearer ID LTE

BTS3900, BTS3900
S1Interface CnOperatorId CN Operator ID
LTE

BTS3900, BTS3900
S1Interface MmeRelease MME Release
LTE

S1 Interface Is BTS3900, BTS3900

S1Interface S1InterfaceIsBlock
Blocked LTE

BTS3900, BTS3900
S1Interface CtrlMode Control Mode
LTE
 BTS3900, BTS3900
S1Interface AutoCfgFlag Auto Config Flag
LTE

MME Selection BTS3900, BTS3900

S1Interface Priority
Priority LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

S1Interface
Id Sharing Group ID LTE

BTS3900, BTS3900
S1Interface S1InterfaceState S1 Interface State
LTE

BTS3900, BTS3900
S1Interface S1CpBearerState S1 CP Bearer State
LTE

BTS3900, BTS3900
S1Interface MmeIsOverLoad MME Is Overloaded
LTE

S1InterfaceUserNu S1 Interface User BTS3900, BTS3900

S1Interface
m Number LTE
 BTS3900, BTS3900
S1Interface MmeName MME Name
LTE

BTS3900, BTS3900
S1Interface ServedPlmns Served PLMNs
LTE

BTS3900, BTS3900
S1Interface ServedGummeis Served GUMMEIs
LTE

MME Relative BTS3900, BTS3900

S1Interface RelativeMmeCap
Capacity LTE

S1 Interface Fault BTS3900, BTS3900

S1Interface S1LinkFaultReason
Reason LTE

BTS3900, BTS3900
SO SoId SO ID
LTE

End Point Group BTS3900, BTS3900

SO EpGroupCfgFlag
Config Flag LTE
 Control Plane End BTS3900, BTS3900
SO CpEpGroupId
Point Group ID LTE

User Plane End BTS3900, BTS3900

SO UpEpGroupId
Point Group ID LTE

BTS3900, BTS3900
SO UserLabel User Label
LTE

SO Interface CP BTS3900, BTS3900

SO SoCpBearerId
Bearer ID LTE

SO Interface CP BTS3900, BTS3900

SO SoCpBearerState
Bearer State LTE

Interface Protocol BTS3900, BTS3900

AblMsg MsgItfType
Name LTE

BTS3900, BTS3900
AblMsg MsgType Message Type
LTE

BTS3900, BTS3900
AblMsg MsgOpType Operate Type
LTE

BTS3900, BTS3900
AblMsg MatchCount Match Count
LTE

BTS3900, BTS3900
AblMsg MatchFieldOffSet1 Match Field Offset 1
LTE

BTS3900, BTS3900
AblMsg MatchLen1 Match Length 1
LTE
 BTS3900, BTS3900
AblMsg MatchContent1 Match Content 1
LTE

BTS3900, BTS3900
AblMsg MatchFieldOffSet2 Match Field Offset 2
LTE

BTS3900, BTS3900
AblMsg MatchLen2 Match Length 2
LTE

BTS3900, BTS3900
AblMsg MatchContent2 Match Content 2
LTE

BTS3900, BTS3900
AblMsg MatchFieldOffSet3 Match Field Offset 3
LTE

BTS3900, BTS3900
AblMsg MatchLen3 Match Length 3
LTE

BTS3900, BTS3900
AblMsg MatchContent3 Match Content 3
LTE

BTS3900, BTS3900
AblMsg ModifyCount Modify Count
LTE

Modify Field Offset BTS3900, BTS3900

AblMsg ModifyFieldOffSet1
1 LTE

BTS3900, BTS3900
AblMsg ModifyLen1 Modify Length 1
LTE
 BTS3900, BTS3900
AblMsg ModifyContent1 Modify Content 1
LTE

Modify Field Offset BTS3900, BTS3900

AblMsg ModifyFieldOffSet2
2 LTE

BTS3900, BTS3900
AblMsg ModifyLen2 Modify Length 2
LTE

BTS3900, BTS3900
AblMsg ModifyContent2 Modify Content 2
LTE

Modify Field Offset BTS3900, BTS3900

AblMsg ModifyFieldOffSet3
3 LTE

BTS3900, BTS3900
AblMsg ModifyLen3 Modify Length 3
LTE

BTS3900, BTS3900
AblMsg ModifyContent3 Modify Content 3
LTE

eNodeB FDD
eNodeBFddBbResI BTS3900, BTS3900
eNodeBFddBbRes Baseband
d LTE
Resource Identifier

BTS3900, BTS3900
eNodeBFddBbRes CN Cabinet Number
LTE

BTS3900, BTS3900
eNodeBFddBbRes SRN Subrack Number
LTE

BTS3900, BTS3900
eNodeBFddBbRes SN Slot Number
LTE
 BTS3900, BTS3900
eNodeBFddBbRes Capacity Capacity
LTE

BTS3900, BTS3900
eNodeBFddBbRes AdmState Administrative State
LTE

BTS3900, BTS3900
eNodeBFddBbRes OpState Operational State
LTE

eNodeB TDD
eNodeBTddBbResI BTS3900, BTS3900
eNodeBTddBbRes Baseband
d LTE
Resource Identifier

BTS3900, BTS3900
eNodeBTddBbRes CN Cabinet Number
LTE

BTS3900, BTS3900
eNodeBTddBbRes SRN Subrack Number
LTE

BTS3900, BTS3900
eNodeBTddBbRes SN Slot Number
LTE

BTS3900, BTS3900
eNodeBTddBbRes Capacity Capacity
LTE

BTS3900, BTS3900
eNodeBTddBbRes AdmState Administrative State
LTE
 BTS3900, BTS3900
eNodeBTddBbRes OpState Operational State
LTE

BTS3900, BTS3900
eX2 eX2Id eX2 Object ID
LTE

End-Point Group BTS3900, BTS3900

eX2 EpGroupCfgFlag
Configuration Flag LTE

Control Plane End- BTS3900, BTS3900

eX2 CpEpGroupId
Point Group ID LTE

User Plane End- BTS3900, BTS3900

eX2 UpEpGroupId
Point Group ID LTE

eX2 Interface BTS3900, BTS3900

eX2 BackhaulType
Backhaul Type LTE

eX2 Object BTS3900, BTS3900

eX2 UserLabel
Description LTE

BTS3900, BTS3900
eX2 eX2InterfaceId eX2 Interface ID
LTE

BTS3900, BTS3900
eX2 eX2InterfaceState eX2 Interface State
LTE

eX2 Interface CP BTS3900, BTS3900

eX2 eX2CpBearerId
Bearer ID LTE

eX2 Interface CP BTS3900, BTS3900

eX2 eX2CpBearerState
Bearer State LTE

BTS3900, BTS3900
MmeFeatureCfg S1InterfaceId S1Interface ID
LTE
 MME supporting BTS3900, BTS3900
MmeFeatureCfg MdtEnable
MDT or not LTE

BTS3900, BTS3900
X2 X2Id X2 ID
LTE

BTS3900, BTS3900
X2 CnOperatorId CN Operator ID
LTE

Control Plane End BTS3900, BTS3900

X2 CpEpGroupId
Point Group ID LTE

User Plane End BTS3900, BTS3900

X2 UpEpGroupId
Point Group ID LTE

TargetENodeBRele Target eNodeB BTS3900, BTS3900

X2
ase Release LTE

BTS3900, BTS3900
X2 UserLabel User Label
LTE
 End Point Group BTS3900, BTS3900
X2 EpGroupCfgFlag
Config Flag LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

X2
Id Sharing Group ID LTE

X2 Interface CP BTS3900, BTS3900

X2 X2CpBearerState
Bearer State LTE

BTS3900, BTS3900
X2 X2InterfaceId X2 Interface ID
LTE

BTS3900, BTS3900
X2 X2InterfaceState X2 Interface State
LTE

X2 Interface CP BTS3900, BTS3900

X2 X2CpBearerId
Bearer ID LTE

Mobile country BTS3900, BTS3900

X2BlackWhiteList Mcc
code LTE
 Mobile network BTS3900, BTS3900
X2BlackWhiteList Mnc
code LTE

BTS3900, BTS3900
X2BlackWhiteList ENodeBId eNodeB ID
LTE

X2 Black or White BTS3900, BTS3900

X2BlackWhiteList X2ListType
List Type LTE

BTS3900, BTS3900
X2Interface X2InterfaceId X2Interface ID
LTE

X2 Interface CP BTS3900, BTS3900

X2Interface X2CpBearerId
Bearer ID LTE

BTS3900, BTS3900
X2Interface CnOperatorId CN Operator ID
LTE

TargetENodeBRele Target eNodeB BTS3900, BTS3900

X2Interface
ase release LTE

BTS3900, BTS3900
X2Interface CtrlMode Control Mode
LTE
 BTS3900, BTS3900
X2Interface AutoCfgFlag Auto Config Flag
LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

X2Interface
Id Sharing Group ID LTE

Neighbor eNodeB BTS3900, BTS3900

X2Interface NbrENodeBId
ID LTE

Neighbor eNodeB BTS3900, BTS3900

X2Interface NbrENodeBPlmnId
PLMN ID LTE

BTS3900, BTS3900
X2Interface X2InterfaceState X2Interface state
LTE

X2AbnormalReaso X2Interface state BTS3900, BTS3900

X2Interface
n abnormal reason LTE
 BTS3900, BTS3900
Drx DrxAlgSwitch DRX switch
LTE

Short-cycle DRX BTS3900, BTS3900

Drx ShortDrxSwitch
switch LTE
 LongDrxCycleSpeci Special long DRX BTS3900, BTS3900
Drx
al cycle LTE
 OnDurationTimerSp Special On BTS3900, BTS3900
Drx
ecial Duration timer LTE
 DrxInactivityTimerS Special DRX BTS3900, BTS3900
Drx
pecial inactivity timer LTE

Special short-cycle
SupportShortDrxSp BTS3900, BTS3900
Drx DRX supported
ecial LTE
indication
 ShortDrxCycleSpeci Special short DRX BTS3900, BTS3900
Drx
al cycle LTE
 DrxShortCycleTimer Special DRX short BTS3900, BTS3900
Drx
Special cycle timer LTE

LongDrxCycleForA Long DRX Cycle for BTS3900, BTS3900

Drx
nr ANR LTE
 LongDRXCycleforI Long DRX Cycle for BTS3900, BTS3900
Drx
RatAnr Inter-RAT ANR LTE

DrxInactivityTimerF DRX Inactivity BTS3900, BTS3900

Drx
orAnr Timer For ANR LTE
 TDD Mode DRX
TddAnrDrxInactivity BTS3900, BTS3900
Drx Inactivity Timer for
Timer LTE
ANR

Extended QoS BTS3900, BTS3900

ExtendedQci ExtendedQci
Class Identifier LTE

BTS3900, BTS3900
ExtendedQci ServiceType Service type
LTE
 Uplink scheduling BTS3900, BTS3900
ExtendedQci UlschPriorityFactor
priority factor LTE

Downlink
BTS3900, BTS3900
ExtendedQci DlschPriorityFactor scheduling priority
LTE
factor

BTS3900, BTS3900
ExtendedQci UlMinGbr Uplink MinGBR
LTE
 BTS3900, BTS3900
ExtendedQci DlMinGbr Downlink MinGBR
LTE

PreAllocationWeigh Pre-allocation BTS3900, BTS3900

ExtendedQci
t weight LTE

InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900

ExtendedQci
oupId config group ID LTE
 BTS3900, BTS3900
ExtendedQci PrioritisedBitRate Prioritised bit rate
LTE

LogicalChannelPrio Logical channel BTS3900, BTS3900

ExtendedQci
rity priority LTE

RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900

ExtendedQci
d parameter group ID LTE
 BTS3900, BTS3900
ExtendedQci FreeUserFlag Free user flag
LTE

BTS3900, BTS3900
ExtendedQci FlowCtrlType Flow Control Type
LTE

LtePttDedicatedExt PTT Dedicated BTS3900, BTS3900

ExtendedQci
endedQci extended QCI LTE

LtePttDownlinkPrior PTT Downlink BTS3900, BTS3900

ExtendedQci
ity Priority LTE
 BTS3900, BTS3900
ExtendedQci LtePttUplinkPriority PTT Uplink Priority
LTE

InterRatPolicyCfgGr InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900

oup oupId config group ID LTE

InterRatPolicyCfgGr UTRAN handover BTS3900, BTS3900

UtranHoCfg
oup policy Configuration LTE

GERAN GSM
InterRatPolicyCfgGr BTS3900, BTS3900
GeranGsmHoCfg handover policy
oup LTE
Configuration

GERAN GPRS
InterRatPolicyCfgGr GeranGprsEdgeHo BTS3900, BTS3900
EDGE handover
oup Cfg LTE
policy Configuration

CDMA2000 1XRTT
InterRatPolicyCfgGr BTS3900, BTS3900
Cdma1xRttHoCfg handover policy
oup LTE
Configuration
 CDMA2000 HRPD
InterRatPolicyCfgGr BTS3900, BTS3900
CdmaHrpdHoCfg handover policy
oup LTE
Configuration

InterRatPolicyCfgGr BTS3900, BTS3900

NoHoFlag No handover flag
oup LTE

InterRatPolicyCfgGr BTS3900, BTS3900

NoFastAnrFlag No fast ANR flag
oup LTE

Delta Offset CQI BTS3900, BTS3900

PuschParam DeltaOffsetCqiIndex
Index LTE
 Delta Offset RI BTS3900, BTS3900
PuschParam DeltaOffsetRiIndex
Index LTE

DeltaOffsetAckInde Delta Offset BTS3900, BTS3900

PuschParam
x Acknowledge Index LTE

RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900

RlcPdcpParaGroup
d parameter group ID LTE
 BTS3900, BTS3900
RlcPdcpParaGroup DiscardTimer Discard timer
LTE

RLC-UM or RLC- BTS3900, BTS3900

RlcPdcpParaGroup RlcMode
AM mode LTE
 UeMaxRetxThresho MaxRetxThreshold BTS3900, BTS3900
RlcPdcpParaGroup
ld for UE LTE
 ENodeBMaxRetxTh MaxRetxThreshold BTS3900, BTS3900
RlcPdcpParaGroup
reshold for eNodeB LTE
 BTS3900, BTS3900
RlcPdcpParaGroup UePollByte PollByte for UE
LTE
 PollByte for BTS3900, BTS3900
RlcPdcpParaGroup ENodeBPollByte
eNodeB LTE
 BTS3900, BTS3900
RlcPdcpParaGroup UePollPdu PollPdu for UE
LTE
 BTS3900, BTS3900
RlcPdcpParaGroup ENodeBPollPdu PollPdu for eNodeB
LTE
 UePollRetransmitTi Poll retransmit timer BTS3900, BTS3900
RlcPdcpParaGroup
mer for UE LTE
 ENodeBPollRetrans Poll retransmit timer BTS3900, BTS3900
RlcPdcpParaGroup
mitTimer for eNodeB LTE
 UeStatusProhibitTi Status prohibit timer BTS3900, BTS3900
RlcPdcpParaGroup
mer for UE LTE
 ENodeBStatusProhi Status prohibit timer BTS3900, BTS3900
RlcPdcpParaGroup
bitTimer for eNodeB LTE
 UeAmReorderingTi AM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup
mer for UE LTE
 ENodeBAmReorder AM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup
ingTimer for eNodeB LTE

BTS3900, BTS3900
RlcPdcpParaGroup PdcpSnSize UM PDCP-SN size
LTE
 BTS3900, BTS3900
RlcPdcpParaGroup UlRlcSnSize Uplink RLC-SN size
LTE

Downlink RLC-SN BTS3900, BTS3900

RlcPdcpParaGroup DlRlcSnSize
size LTE
 UeUmReorderingTi UM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup
mer for UE LTE
 ENodeBUmReorder UM reordering timer BTS3900, BTS3900
RlcPdcpParaGroup
ingTimer for eNodeB LTE

AM PDCP status
BTS3900, BTS3900
RlcPdcpParaGroup PdcpStatusRptReq report required
LTE
indication
 RlcParaAdaptSwitc RLC Parameter BTS3900, BTS3900
RlcPdcpParaGroup
h Adaptive Switch LTE
 eNodeBPollRtrTime Preset eNodeB Poll BTS3900, BTS3900
RlcPdcpParaGroup
rPreset Retransmit Timer LTE
 Preset eNodeB
eNodeBStatProhTi BTS3900, BTS3900
RlcPdcpParaGroup Status Prohibit
merPreset LTE
Timer
 UePollRtrTimerPres Preset UE Poll BTS3900, BTS3900
RlcPdcpParaGroup
et Retransmit Timer LTE
 UeStatProhTimerPr Preset UE Status BTS3900, BTS3900
RlcPdcpParaGroup
eset Prohibit Timer LTE

NonsptUmUeAdapt Nonsupport Um UE BTS3900, BTS3900

RlcPdcpParaGroup
Switch Adaptive Switch LTE
 Discardtimer
UlDlDiscardtimerSw BTS3900, BTS3900
RlcPdcpParaGroup Separate Config
itch LTE
Switch
 DlPdcpDiscardTime DownLink PDCP BTS3900, BTS3900
RlcPdcpParaGroup
r Discard Timer LTE

BTS3900, BTS3900
SrbRlcPdcpCfg SrbId SRB ID
LTE

UeMaxRetxThresho MaxRetxThreshold BTS3900, BTS3900

SrbRlcPdcpCfg
ld for UE LTE
 ENodeBMaxRetxTh MaxRetxThreshold BTS3900, BTS3900
SrbRlcPdcpCfg
reshold for eNodeB LTE

BTS3900, BTS3900
SrbRlcPdcpCfg UePollByte PollByte for UE
LTE
 PollByte for BTS3900, BTS3900
SrbRlcPdcpCfg ENodeBPollByte
eNodeB LTE
 BTS3900, BTS3900
SrbRlcPdcpCfg UePollPdu PollPdu for UE
LTE
 BTS3900, BTS3900
SrbRlcPdcpCfg ENodeBPollPdu PollPdu for eNodeB
LTE
 UePollRetransmitTi Poll retransmit timer BTS3900, BTS3900
SrbRlcPdcpCfg
mer for UE LTE
 ENodeBPollRetrans Poll retransmit timer BTS3900, BTS3900
SrbRlcPdcpCfg
mitTimer for eNodeB LTE
 UeStatusProhibitTi Status prohibit timer BTS3900, BTS3900
SrbRlcPdcpCfg
mer for UE LTE
 ENodeBStatusProhi Status prohibit timer BTS3900, BTS3900
SrbRlcPdcpCfg
bitTimer for eNodeB LTE
 UeAmReorderingTi AM reordering timer BTS3900, BTS3900
SrbRlcPdcpCfg
mer for UE LTE
 ENodeBAmReorder AM reordering timer BTS3900, BTS3900
SrbRlcPdcpCfg
ingTimer for eNodeB LTE

QoS Class BTS3900, BTS3900

StandardQci Qci
Indication LTE
 BTS3900, BTS3900
StandardQci UlschPriorityFactor Ulsch priority factor
LTE

BTS3900, BTS3900
StandardQci DlschPriorityFactor Dlsch priority factor
LTE

BTS3900, BTS3900
StandardQci UlMinGbr Uplink MinGBR
LTE
 BTS3900, BTS3900
StandardQci DlMinGbr Downlink MinGBR
LTE

PreAllocationWeigh Pre-allocation BTS3900, BTS3900

StandardQci
t weight LTE

InterRatPolicyCfgGr InterRAT policy BTS3900, BTS3900

StandardQci
oupId config group ID LTE

RlcPdcpParaGroupI RLC PDCP BTS3900, BTS3900

StandardQci
d parameter group ID LTE
 BTS3900, BTS3900
StandardQci PrioritisedBitRate Prioritised bit rate
LTE

LogicalChannelPrio Logical channel BTS3900, BTS3900

StandardQci
rity priority LTE
 BTS3900, BTS3900
StandardQci FlowCtrlType Flow control type
LTE

QoS Class BTS3900, BTS3900

eNBQciRsvdPara Qci
Indication LTE
 Reserved Switch BTS3900, BTS3900
eNBQciRsvdPara RsvdSwPara0
Parameter 0 LTE
 Reserved Switch BTS3900, BTS3900
eNBQciRsvdPara RsvdSwPara1
Parameter 1 LTE
 Reserved Switch BTS3900, BTS3900
eNBQciRsvdPara RsvdSwPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara4
Parameter 4 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara5
Parameter 5 LTE
 Reserved BTS3900, BTS3900
eNBQciRsvdPara RsvdPara6
Parameter 6 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara7
Parameter 7 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara8
Parameter 8 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara9
Parameter 9 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara10
Parameter 10 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara11
Parameter 11 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara12
Parameter 12 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara13
Parameter 13 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara14
Parameter 14 LTE
 Reserved BTS3900, BTS3900
eNBQciRsvdPara RsvdPara15
Parameter 15 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara16
Parameter 16 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara17
Parameter 17 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara18
Parameter 18 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara19
Parameter 19 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara20
Parameter 20 LTE

Reserved BTS3900, BTS3900

eNBQciRsvdPara RsvdPara21
Parameter 21 LTE
BfMimoAdaptivePar BfMimoAdaptiveSwi BfMIMO adaptive BTS3900, BTS3900
aCfg tch switch LTE
BfMimoAdaptivePar Fixed BfMIMO BTS3900, BTS3900
FixedBfMimoMode
aCfg mode LTE
 CQI period adaptive BTS3900, BTS3900
CqiAdaptiveCfg CqiPeriodAdaptive
switch LTE

User CQI period BTS3900, BTS3900

CqiAdaptiveCfg UserCqiPeriodCfg
config LTE
 SimultaneousAckN
SimulAckNackAndC BTS3900, BTS3900
CqiAdaptiveCfg ackAndCQI config
qiSwitch LTE
switch
 PUCCH Periodic
PucchPeriodicCqiO BTS3900, BTS3900
CqiAdaptiveCfg CQI Optimize
ptSwitch LTE
Switch

HoAperiodicCqiCfg Handover Aperiodic BTS3900, BTS3900

CqiAdaptiveCfg
Switch Cqi Config Switch LTE
MimoAdaptivePara MimoAdaptiveSwitc MIMO adaptive BTS3900, BTS3900
Cfg h switch LTE
MimoAdaptivePara BTS3900, BTS3900
FixedMimoMode Fixed MIMO mode
Cfg LTE
MimoAdaptivePara BTS3900, BTS3900
InitialMimoType Initial Mimo Type
Cfg LTE

SRS period BTS3900, BTS3900

SrsAdaptiveCfg SrsPeriodAdaptive
adaptive switch LTE
 User SRS period BTS3900, BTS3900
SrsAdaptiveCfg UserSrsPeriodCfg
config LTE

BTS3900, BTS3900
UeCompatOpt ImeisvTac IMEISV TAC
LTE

IMEISV SVN BTS3900, BTS3900

UeCompatOpt ImeisvSvnCfgInd
Configure Indicator LTE

BTS3900, BTS3900
UeCompatOpt ImeisvSvn IMEISV SVN
LTE
 Black List Control BTS3900, BTS3900
UeCompatOpt BlkLstCtrlSwitch
Switch LTE

Ue Type BTS3900, BTS3900

UeCompatOpt UeTypeDesc
Description LTE

BTS3900, BTS3900
TypDrbBsr Qci QoS Class Identifier
LTE
 BTS3900, BTS3900
TypDrbBsr TPerodicBSRTimer Periodic BSR Timer
LTE

BSR
BTS3900, BTS3900
TypDrbBsr RetxBsrTimer Retransmission
LTE
Timer
 GAP measurement BTS3900, BTS3900
HoMeasComm GapPatternType
pattern LTE

EutranFilterCoeffRs EUTRAN RSRP BTS3900, BTS3900

HoMeasComm
rp filter coefficient LTE

EutranFilterCoeffRs EUTRAN RSRQ BTS3900, BTS3900

HoMeasComm
rq filter coefficient LTE
 GERAN filter BTS3900, BTS3900
HoMeasComm GeranFilterCoeff
coefficient LTE

BTS3900, BTS3900
HoMeasComm SMeasureInd SMeasureInd
LTE
 BTS3900, BTS3900
HoMeasComm SMeasure SMeasure
LTE
 BTS3900, BTS3900
HoMeasComm SpeedDepParaInd SpeedDependInd
LTE
 TCRmax in BTS3900, BTS3900
HoMeasComm TcrMaxConnMode
connected mode LTE
 TcrMaxHystConnM TCRmaxHyst in BTS3900, BTS3900
HoMeasComm
ode connected mode LTE
 NcrMediumConnMo NCR Medium in BTS3900, BTS3900
HoMeasComm
de connected mode LTE
 NCR High in BTS3900, BTS3900
HoMeasComm NcrHighConnMode
connected mode LTE
 TTT Scaling factor
for Medium mobility BTS3900, BTS3900
HoMeasComm TttSfMedium
state in connected LTE
mode
 TTT Scaling factor
for High mobility BTS3900, BTS3900
HoMeasComm TttSfHigh
state in connected LTE
mode

UtranFilterCoeffRsc UTRAN RSCP filter BTS3900, BTS3900

HoMeasComm
p coefficient LTE

UtranFilterCoeffEcn UTRAN ECN0 filter BTS3900, BTS3900

HoMeasComm
0 coefficient LTE
 Optimized
OptHoPreFailPunis BTS3900, BTS3900
HoMeasComm Handover Prepare
hTimer LTE
Fail Punish Timer

InterRatHoMaxRprt Max report cell BTS3900, BTS3900

InterRatHoComm
Cell number LTE
 InterRatHoRprtAmo Measurement BTS3900, BTS3900
InterRatHoComm
unt report amount LTE

Geran
InterRatHoGeranRp BTS3900, BTS3900
InterRatHoComm measurement
rtInterval LTE
report interval
 InterRatHoUtranB1 Utran measurement BTS3900, BTS3900
InterRatHoComm
MeasQuan trigger quantity LTE

UTRAN FDD
InterRatHoUtranRpr BTS3900, BTS3900
InterRatHoComm measurement
tInterval LTE
report interval

CDMA20001XRTT
InterRatHoCdma1x BTS3900, BTS3900
InterRatHoComm measurement
RttB1MeasQuan LTE
trigger quantity
 CDMA20001XRTT
InterRatCdma1xRtt BTS3900, BTS3900
InterRatHoComm measurement
RprtInterval LTE
report interval

CDMA2000HRPD
InterRatHoCdmaHr BTS3900, BTS3900
InterRatHoComm measurement
pdB1MeasQuan LTE
trigger quantity

CDMA2000HRPD
InterRatCdmaHrpd BTS3900, BTS3900
InterRatHoComm measurement
RprtInterval LTE
report interval
 InterRat A1A2
InterRatHoA1A2Tri BTS3900, BTS3900
InterRatHoComm measurement
gQuan LTE
trigger quantity

InterRatHoEventTy Inter RAT HO BTS3900, BTS3900

InterRatHoComm
pe Trigger Event Type LTE

Cdma20001XrttMe CDMA2000 1xRTT BTS3900, BTS3900

InterRatHoComm
asTimer Measure Timer LTE

Cdma20001XrttJud CDMA2000 1xRTT BTS3900, BTS3900

InterRatHoComm
gePnNum Judge PN Number LTE

CDMA2000 HRPD
Cdma2000HrpdFre BTS3900, BTS3900
InterRatHoComm Frequency Select
qSelMode LTE
Mode
 CDMA2000 1xRTT
Cdma20001XrttFre BTS3900, BTS3900
InterRatHoComm Frequency Select
qSelMode LTE
Mode

CdmaEcsfbPsConc eCSFB PS BTS3900, BTS3900

InterRatHoComm
urrentMode Concurrent Mode LTE

Cdma20001XrttMe eCSFB BTS3900, BTS3900

InterRatHoComm
asMode Measurement Mode LTE

Cdma1XrttSectorId eCSFB SectorID BTS3900, BTS3900

InterRatHoComm
SelMode Select Mode LTE

CellInfoMaxUtranC Max Utran cell num BTS3900, BTS3900

InterRatHoComm
ellNum in redirection LTE

CellInfoMaxGeranC Max Geran cell num BTS3900, BTS3900

InterRatHoComm
ellNum in redirection LTE

Max Geran cell num

GeranCellNumForE BTS3900, BTS3900
InterRatHoComm in CSFB EMC
mcRedirect LTE
redirection

Max Utran cell num

UtranCellNumForE BTS3900, BTS3900
InterRatHoComm in CSFB EMC
mcRedirect LTE
redirection
 CDMA2000 eHRPD
CdmaHrpdSectorId BTS3900, BTS3900
InterRatHoComm SectorID Select
SelMode LTE
Mode

InterRAT Blind
IRatBlindRedirPlmn BTS3900, BTS3900
InterRatHoComm Redir PLMN Cfg
CfgSimSw LTE
Simplify Sw
 IntraRatHoMaxRprt Max report cell BTS3900, BTS3900
IntraRatHoComm
Cell number LTE

IntraRatHoRprtAmo Measurement BTS3900, BTS3900

IntraRatHoComm
unt report amount LTE
 IntraFreqHoA3Trig A3 measurement BTS3900, BTS3900
IntraRatHoComm
Quan trigger quantity LTE

IntraFreqHoA3Rprt A3 measurement BTS3900, BTS3900

IntraRatHoComm
Quan report quantity LTE

IntraFreqHoRprtInte A3 measurement BTS3900, BTS3900

IntraRatHoComm
rval report interval LTE
 InterFreqHoA4Rprt Measurement A4 BTS3900, BTS3900
IntraRatHoComm
Quan report quantity LTE

Interfreq
InterFreqHoRprtInte BTS3900, BTS3900
IntraRatHoComm measurement
rval LTE
report interval
 InterFreq A1A2
InterFreqHoA1A2Tri BTS3900, BTS3900
IntraRatHoComm Measurement
gQuan LTE
trigger quantity

A1A2 Measurement
FreqPriInterFreqHo BTS3900, BTS3900
IntraRatHoComm trigger quantity of
A1TrigQuan LTE
Freq Priority

InterFreqHoA4Trig A4 Measurement BTS3900, BTS3900

IntraRatHoComm
Quan Trigger Quantity LTE
 Coverage Based
CovBasedIfHoWaiti BTS3900, BTS3900
IntraRatHoComm Inter Frequency HO
ngTimer LTE
Waiting Timer

A3 InterFreq A1A2
A3InterFreqHoA1A BTS3900, BTS3900
IntraRatHoComm Measurement
2TrigQuan LTE
TrigQuan

BTS3900, BTS3900
CSFallBackHo LocalCellId Local cell ID
LTE
 CSFB Utran
CsfbHoUtranTimeT BTS3900, BTS3900
CSFallBackHo EventB1 Time To
oTrig LTE
Trig

CSFB Geran
CsfbHoGeranTimeT BTS3900, BTS3900
CSFallBackHo EventB1 Time To
oTrig LTE
Trig

CSFB CDMA
CsfbHoCdmaTimeT BTS3900, BTS3900
CSFallBackHo EventB1 Time To
oTrig LTE
Trig

CSFB UTRAN
CsfbHoUtranB1Thd BTS3900, BTS3900
CSFallBackHo EventB1 RSCP
Rscp LTE
Trigger Threshold
 CSFB UTRAN
CsfbHoUtranB1Thd BTS3900, BTS3900
CSFallBackHo EventB1 ECN0
Ecn0 LTE
Trigger Threshold

CSFB GERAN
CsfbHoGeranB1Th BTS3900, BTS3900
CSFallBackHo EventB1 Trigger
d LTE
Threshold

CSFB CDMA2000
CsfbHoCdmaB1Thd BTS3900, BTS3900
CSFallBackHo EventB1 Trigger
Ps LTE
Threshold

CSFB Adaptive
BTS3900, BTS3900
CSFallBackHo BlindHoA1ThdRsrp Blind Ho A1 RSRP
LTE
Trigger Threshold
 CsfbProtectionTime CSFB Protection BTS3900, BTS3900
CSFallBackHo
r Timer LTE

BTS3900, BTS3900
CellAcBar LocalCellId Local cell ID
LTE
 AC barring
AcBarringInfoCfgIn BTS3900, BTS3900
CellAcBar information
d LTE
configure indicator

AcBarringForEmerg Emergency call BTS3900, BTS3900

CellAcBar
ency barring state LTE

AC barring for
AcBarringForMoDat BTS3900, BTS3900
CellAcBar mobile data
aCfgInd LTE
configure indicator
 Access probability
AcBarringFactorFor BTS3900, BTS3900
CellAcBar factor for originating
Call LTE
call

Mean access
BTS3900, BTS3900
CellAcBar AcBarTimeForCall barring time for
LTE
originating call
 AC11 barring state BTS3900, BTS3900
CellAcBar AC11BarforCall
for originating call LTE

AC12 barring state BTS3900, BTS3900

CellAcBar AC12BarforCall
for originating call LTE

AC13 barring state BTS3900, BTS3900

CellAcBar AC13BarforCall
for originating call LTE

AC14 barring state BTS3900, BTS3900

CellAcBar AC14BarforCall
for originating call LTE

AC15 barring state BTS3900, BTS3900

CellAcBar AC15BarforCall
for originating call LTE
 AC barring for
AcBarringForMoSig BTS3900, BTS3900
CellAcBar mobile signal
CfgInd LTE
configure indicator

AcBarringFactorFor Access probability BTS3900, BTS3900

CellAcBar
Sig factor for signaling LTE
 Mean access
BTS3900, BTS3900
CellAcBar AcBarTimeForSig barring time for
LTE
signaling

AC11 barring state BTS3900, BTS3900

CellAcBar AC11BarForSig
for signaling LTE

AC12 barring state BTS3900, BTS3900

CellAcBar AC12BarForSig
for signaling LTE

AC13 barring state BTS3900, BTS3900

CellAcBar AC13BarForSig
for signaling LTE
 AC14 barring state BTS3900, BTS3900
CellAcBar AC14BarForSig
for signaling LTE

AC15 barring state BTS3900, BTS3900

CellAcBar AC15BarForSig
for signaling LTE

AC barring for
AcBarForMVoiceCf BTS3900, BTS3900
CellAcBar MMTEL voice
gInd LTE
configure indicator
 Access probability
AcBarFactorForMV BTS3900, BTS3900
CellAcBar factor for MMTEL
oice LTE
voice

Mean access
AcBarTimeForMVoi BTS3900, BTS3900
CellAcBar barring time for
ce LTE
MMTEL voice
 AC 11-15 barring
SpecialACBarForM BTS3900, BTS3900
CellAcBar state for MMTEL
Voice LTE
voice

AC barring for
AcBarForMVideoCf BTS3900, BTS3900
CellAcBar MMTEL video
gInd LTE
configure indicator
 Access probability
AcBarFactorForMVi BTS3900, BTS3900
CellAcBar factor for MMTEL
deo LTE
video

Mean access
AcBarTimeForMVid BTS3900, BTS3900
CellAcBar barring time for
eo LTE
MMTEL video
 AC 11-15 barring
SpecialACBarForM BTS3900, BTS3900
CellAcBar state for MMTEL
Video LTE
video

AC barring for
AcBarForCsfbCfgIn BTS3900, BTS3900
CellAcBar CSFB configure
d LTE
indicator
 AcBarFactorForCsf Access probability BTS3900, BTS3900
CellAcBar
b factor for CSFB LTE

Mean access
BTS3900, BTS3900
CellAcBar AcBarTimeForCsfb barring time for
LTE
CSFB
 SpecialACBarForCs AC 11-15 barring BTS3900, BTS3900
CellAcBar
fb state for CSFB LTE

BTS3900, BTS3900
CellAccess LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellAccess CellBarred Cell barring state
LTE

Intra-frequency
BTS3900, BTS3900
CellAccess IntraFreqResel reselection
LTE
indication

Plmn Broadcast BTS3900, BTS3900

CellAccess BroadcastMode
Mode LTE

Plmn Round BTS3900, BTS3900

CellAccess RoundPeriod
Broadcast Period LTE
 Plmn Round Action BTS3900, BTS3900
CellAccess RoundActionTime
Time LTE

Repeat
BTS3900, BTS3900
CellAccess ReptSyncAvoidInd Synchronization
LTE
Avoid Indication

Repeat
ReptSyncAvoidTim BTS3900, BTS3900
CellAccess Synchronization
e LTE
Avoid Time

BTS3900, BTS3900
CellOp LocalCellId Local cell ID
LTE

Local tracking area BTS3900, BTS3900

CellOp TrackingAreaId
ID LTE
 Cell reserved for BTS3900, BTS3900
CellOp CellReservedForOp
operator LTE

Operator uplink RB BTS3900, BTS3900

CellOp OpUlRbUsedRatio
used ratio LTE

Operator downlink BTS3900, BTS3900

CellOp OpDlRbUsedRatio
RB used ratio LTE

MME configure BTS3900, BTS3900

CellOp MMECfgNum
number LTE

First MME group BTS3900, BTS3900

CellOp MMEGI1
identity LTE
 BTS3900, BTS3900
CellOp MMEC1 First MME code
LTE

Second MME group BTS3900, BTS3900

CellOp MMEGI2
identity LTE

BTS3900, BTS3900
CellOp MMEC2 Second MME code
LTE

Third MME group BTS3900, BTS3900

CellOp MMEGI3
identity LTE
 BTS3900, BTS3900
CellOp MMEC3 Third MME code
LTE

Fourth MME group BTS3900, BTS3900

CellOp MMEGI4
identity LTE

BTS3900, BTS3900
CellOp MMEC4 Fourth MME code
LTE

Operator Ue BTS3900, BTS3900

CellOp OpUeNumRatio
Number Ratio LTE

BroadcastCnOperat Broadcast CN BTS3900, BTS3900

CellOp
orId operator ID LTE

BTS3900, BTS3900
CellResel LocalCellId Local cell ID
LTE
 Hysteresis value for BTS3900, BTS3900
CellResel Qhyst
ranking criteria LTE

Speed-dependent
SpeedDepReselCfg reselection BTS3900, BTS3900
CellResel
Ind parameter LTE
configure indicator

The duration for

evaluating criteria BTS3900, BTS3900
CellResel TEvaluation
to enter mobility LTE
states
 Additional time
BTS3900, BTS3900
CellResel THystNormal hysteresis for
LTE
normal speed

The number of cell

NCellChangeMediu changes to enter BTS3900, BTS3900
CellResel
m medium mobility LTE
state
 The number of cell
BTS3900, BTS3900
CellResel NCellChangeHigh changes to enter
LTE
high mobility state

Additional
BTS3900, BTS3900
CellResel QHystSfMedium hysteresis for
LTE
medium speed

Additional
BTS3900, BTS3900
CellResel QHystSfHigh hysteresis for high
LTE
speed
 Threshold for non-
SNonIntraSearchCf intra freq BTS3900, BTS3900
CellResel
gInd measurements LTE
configure indicator

Threshold for non-

BTS3900, BTS3900
CellResel SNonIntraSearch intra frequency
LTE
measurements

Serving frequency
BTS3900, BTS3900
CellResel ThrshServLow lower priority
LTE
threshold

Cell reselection BTS3900, BTS3900

CellResel CellReselPriority
priority LTE
 Minimum required BTS3900, BTS3900
CellResel QRxLevMin
RX level LTE

Ue max power
BTS3900, BTS3900
CellResel PMaxCfgInd allowed configure
LTE
indicator

Max transmit power BTS3900, BTS3900

CellResel PMax
allowed LTE

Threshold for intra

BTS3900, BTS3900
CellResel SIntraSearchCfgInd freq measurements
LTE
configure indicator
 Threshold for intra
BTS3900, BTS3900
CellResel SIntraSearch frequency
LTE
measurements

Measurement
MeasBandWidthCfg BTS3900, BTS3900
CellResel bandwidth
Ind LTE
configure indicator

Measurement BTS3900, BTS3900

CellResel MeasBandWidth
bandwidth LTE

Cell reselection
BTS3900, BTS3900
CellResel TReselEutran timer value for
LTE
EUTRAN

Speed state scale

SpeedStateSfCfgIn BTS3900, BTS3900
CellResel factor configure
d LTE
indicator
 Scaling factor of
TReselEutranSfMe TReselEutran in BTS3900, BTS3900
CellResel
dium medium mobility LTE
state

Scaling factor of
TReselEutranSfHig BTS3900, BTS3900
CellResel TReselEutran in
h LTE
high mobility state

Neighbor Cell BTS3900, BTS3900

CellResel NeighCellConfig
Configuration LTE

PresenceAntennaP Presence antenna BTS3900, BTS3900

CellResel
ort1 port1 LTE
 RSRQ Threshold
BTS3900, BTS3900
CellResel SIntraSearchQ for intra frequency
LTE
measurements

RSRQ Threshold
for non-intra BTS3900, BTS3900
CellResel SNonIntraSearchQ
frequency LTE
measurements

Serving frequency
ThrshServLowQCfg lower priority RSRQ BTS3900, BTS3900
CellResel
Ind threshold configure LTE
indicator

Serving frequency
BTS3900, BTS3900
CellResel ThrshServLowQ lower priority RSRQ
LTE
threshold
 Minimum required
BTS3900, BTS3900
CellResel QQualMinCfgInd quality level
LTE
configure indicator

Minimum required BTS3900, BTS3900

CellResel QQualMin
quality level LTE

CellReselCdma200 BTS3900, BTS3900

LocalCellId Local cell ID
0 LTE
 System time
CellReselCdma200 BTS3900, BTS3900
SysTimeCfgInd information
0 LTE
configure indicator

CDMA and EUTRA

CellReselCdma200 network BTS3900, BTS3900
CdmaEutraSyn
0 synchronised LTE
indicator

CDMA search
CellReselCdma200 SearchWndSizeCfg BTS3900, BTS3900
window size
0 Ind LTE
configure indicator

CellReselCdma200 BTS3900, BTS3900

SearchWndSize Search window size
0 LTE
CellReselCdma200 HRPD parameters BTS3900, BTS3900
HrpdParaCfgInd
0 configure indicator LTE

HRPD cell
CellReselCdma200 HrpdCellReselectP BTS3900, BTS3900
reselection
0 aramCfgInd LTE
configure indicator

CellReselCdma200 Cell reselection BTS3900, BTS3900

TreselectionHrpd
0 timer for HRPD LTE
 Speed state scale
CellReselCdma200 SpeedStateSfCfgIn BTS3900, BTS3900
factor configure
0 d LTE
indicator

Scaling factor of
CellReselCdma200 TReselCdmaHrpdSf TReselCdmaHrpd BTS3900, BTS3900
0 High in high mobility LTE
state
 Scaling factor of
CellReselCdma200 TReselCdmaHrpdSf TReselCdmaHrpd BTS3900, BTS3900
0 Medium in medium mobility LTE
state

CellReselCdma200 Cdma1XrttParaCfgI 1XRTT parameters BTS3900, BTS3900

0 nd configure indicator LTE

1XRTT state of long

CellReselCdma200 Cdma1XrttLongCod code generation BTS3900, BTS3900
0 eStateCfgInd registers configure LTE
indicator
 1XRTT cell
CellReselCdma200 Cdma1XrttCellRese BTS3900, BTS3900
reselection
0 lCfgInd LTE
configure indicator

CellReselCdma200 Cdma1XrttTreselect Cell reselection BTS3900, BTS3900

0 ion timer for 1XRTT LTE

1XRTT speed state

CellReselCdma200 Cdma1XrttSpeedSt BTS3900, BTS3900
scale factors
0 ateCfgInd LTE
configure indicator
CellReselCdma200 Cdma1XrttSfMediu 1XRTT medium BTS3900, BTS3900
0 m speed scale factor LTE

CellReselCdma200 1XRTT high speed BTS3900, BTS3900

Cdma1XrttSfHigh
0 scale factor LTE

CellReselCdma200 SupportDualRxCsfb Dual Rx CSFB BTS3900, BTS3900

0 CfgInd configure indicator LTE
 Dual Rx CSFB
CellReselCdma200 BTS3900, BTS3900
SupportDualRxCsfb supported
0 LTE
indication

BTS3900, BTS3900
CellReselGeran LocalCellId Local cell ID
LTE

Cell reselection
BTS3900, BTS3900
CellReselGeran TReselGeran timer value for
LTE
GERAN

Speed state scale

SpeedStateSfCfgIn BTS3900, BTS3900
CellReselGeran factor configure
d LTE
indicator
 Scaling factor of
TReselGeranSfMed TReselGeran in BTS3900, BTS3900
CellReselGeran
ium medium mobility LTE
state

Scaling factor of
BTS3900, BTS3900
CellReselGeran TReselGeranSfHigh TReselGeran in
LTE
high mobility state

BTS3900, BTS3900
CellReselUtran LocalCellId Local cell ID
LTE

Cell reselection
BTS3900, BTS3900
CellReselUtran TReselUtran timer value for
LTE
UTRAN

Speed state scale

SpeedStateSfCfgIn BTS3900, BTS3900
CellReselUtran factor configure
d LTE
indicator
 Scaling factor of
TReselUtranSfMedi TReselUtran in BTS3900, BTS3900
CellReselUtran
um medium mobility LTE
state

Scaling factor of
BTS3900, BTS3900
CellReselUtran TReselUtranSfHigh TReselUtran in high
LTE
mobility state

BTS3900, BTS3900
CellSel LocalCellId Local cell ID
LTE

Minimum required BTS3900, BTS3900

CellSel QRxLevMin
RX level LTE
 Minimum required BTS3900, BTS3900
CellSel QRxLevMinOffset
RX level offset LTE

Minimum required BTS3900, BTS3900

CellSel QQualMin
RX quality level LTE

Minimum required
QQualMinOffsetCfg RX quality level BTS3900, BTS3900
CellSel
Ind offset configure LTE
indicator
 Minimum required
BTS3900, BTS3900
CellSel QQualMinOffset RX quality level
LTE
offset

BTS3900, BTS3900
CellSiMap LocalCellId Local cell ID
LTE

SIB mapping SI BTS3900, BTS3900

CellSiMap SiMapSwitch
algorithm switch LTE

BTS3900, BTS3900
CellSiMap Sib2Period SIB2 period
LTE
 BTS3900, BTS3900
CellSiMap Sib3Period SIB3 period
LTE

BTS3900, BTS3900
CellSiMap Sib4Period SIB4 period
LTE

BTS3900, BTS3900
CellSiMap Sib5Period SIB5 period
LTE
 BTS3900, BTS3900
CellSiMap Sib6Period SIB6 period
LTE

BTS3900, BTS3900
CellSiMap Sib7Period SIB7 period
LTE

BTS3900, BTS3900
CellSiMap Sib8Period SIB8 period
LTE
 BTS3900, BTS3900
CellSiMap Sib10Period SIB10 period
LTE

BTS3900, BTS3900
CellSiMap Sib11Period SIB11 period
LTE

ETWS PN message BTS3900, BTS3900

CellSiMap EtwsPnDuration
duration time LTE

EtwsSnOverlapPoli ETWS SN message BTS3900, BTS3900

CellSiMap
cy overlap policy LTE

EtwsPnOverlapPoli ETWS PN message BTS3900, BTS3900

CellSiMap
cy overlap policy LTE
 BTS3900, BTS3900
CellSiMap Sib12Period SIB12 period
LTE

Effective code rate BTS3900, BTS3900

CellSiMap SiTransEcr
for SI transmission LTE

BTS3900, BTS3900
CellSiMap Sib13Period SIB13 period
LTE
 BTS3900, BTS3900
CellSiMap Sib15Period SIB15 period
LTE

BTS3900, BTS3900
CellSiMap Sib16Period SIB16 period
LTE

SIB Transmission BTS3900, BTS3900

CellSiMap SibTransCtrlSwitch
Control Switch LTE

BTS3900, BTS3900
CellUlpcComm LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
CellUlpcComm PassLossCoeff Path loss coefficient
LTE

BTS3900, BTS3900
CellUlpcComm P0NominalPUCCH P0 nominal PUCCH
LTE
 BTS3900, BTS3900
CellUlpcComm P0NominalPUSCH P0 nominal PUSCH
LTE

DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900

CellUlpcComm
at1 format 1 LTE

DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900

CellUlpcComm
at1b format 1b LTE
 DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900
CellUlpcComm
at2 format 2 LTE

DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900

CellUlpcComm
at2a format 2a LTE

DeltaFPUCCHForm DeltaF for PUCCH BTS3900, BTS3900

CellUlpcComm
at2b format 2b LTE
 DeltaPreambleMsg Delta preamble BTS3900, BTS3900
CellUlpcComm
3 value for msg3 LTE

BTS3900, BTS3900
CellUlpcComm DeltaMsg2 Delta Message 2
LTE

eNBCellOpRsvdPar BTS3900, BTS3900

LocalCellId Local cell ID
a LTE

eNBCellOpRsvdPar Local tracking area BTS3900, BTS3900

TrackingAreaId
a ID LTE
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900
RsvdSwPara0
a Parameter 0 LTE
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900
RsvdSwPara1
a Parameter 1 LTE
eNBCellOpRsvdPar Reserved Switch BTS3900, BTS3900
RsvdSwPara2
a Parameter 2 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara2
a Parameter 2 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara3
a Parameter 3 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara4
a Parameter 4 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara5
a Parameter 5 LTE
eNBCellOpRsvdPar Reserved BTS3900, BTS3900
RsvdPara6
a Parameter 6 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara7
a Parameter 7 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara8
a Parameter 8 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara9
a Parameter 9 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara10
a Parameter 10 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara11
a Parameter 11 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara12
a Parameter 12 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara13
a Parameter 13 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara14
a Parameter 14 LTE
eNBCellOpRsvdPar Reserved BTS3900, BTS3900
RsvdPara15
a Parameter 15 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara16
a Parameter 16 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara17
a Parameter 17 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara18
a Parameter 18 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara19
a Parameter 19 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara20
a Parameter 20 LTE

eNBCellOpRsvdPar Reserved BTS3900, BTS3900

RsvdPara21
a Parameter 21 LTE

BTS3900, BTS3900
EuCellPriBBEqm LocalCellId Local cell ID
LTE

Primary Baseband BTS3900, BTS3900

EuCellPriBBEqm PriBaseBandEqmId
Equipment ID LTE
 BTS3900, BTS3900
eUCellSectorEqm LocalCellId Local cell ID
LTE

Sector equipment BTS3900, BTS3900

eUCellSectorEqm SectorEqmId
ID LTE

ReferenceSignalPw Reference signal BTS3900, BTS3900

eUCellSectorEqm
r power LTE

Baseband BTS3900, BTS3900

eUCellSectorEqm BaseBandEqmId
equipment ID LTE

BTS3900, BTS3900
eUCellSectorEqm CN RRU Cabinet No.
LTE

BTS3900, BTS3900
eUCellSectorEqm SRN RRU Subrack No.
LTE

BTS3900, BTS3900
eUCellSectorEqm SN RRU Slot No.
LTE

Received total BTS3900, BTS3900

eUCellSectorEqm EuRTWP
wideband power LTE

BTS3900, BTS3900
eUCellSectorEqm RXNO RX Channels No.
LTE
 ReferenceSignalPw Reference Signal BTS3900, BTS3900
eUCellSectorEqm
rMargin Power Margin LTE

SectorCpriCompres Sector CPRI BTS3900, BTS3900

eUCellSectorEqm
sion Compression LTE

BTS3900, BTS3900
eUCellSectorEqm eNodeBId eNodeB ID
LTE

EuSectorEqmGrou BTS3900, BTS3900

LocalCellId Local cell ID
p LTE

EuSectorEqmGrou Sector Equipment BTS3900, BTS3900

SectorEqmGroupId
p Group ID LTE
EuSectorEqmGrou Sector Equipment BTS3900, BTS3900
SectorEqmRef
p Reference LTE

EuSectorEqmGrou SectorEqmRefType. Sector equipment BTS3900, BTS3900

p SectorEqmId ID LTE

EuSectorEqmGrou Baseband BTS3900, BTS3900

BaseBandEqmId
p equipment ID LTE

EuSectorEqmGrou ReferenceSignalPw Reference signal BTS3900, BTS3900

p r power LTE
EuSectorEqmGrou SectorGroupCpriCo Sector Group CPRI BTS3900, BTS3900
p mpression Compression LTE

BTS3900, BTS3900
IbdlInfo LocalCellId Local cell ID
LTE

BTS3900, BTS3900
IbdlInfo eNodeBId Connect eNodeB ID
LTE

RRU/RFU Cabinet BTS3900, BTS3900

IbdlInfo CN
No. LTE

RRU/RFU Subrack BTS3900, BTS3900

IbdlInfo SRN
No. LTE

BTS3900, BTS3900
IbdlInfo SN RRU/RFU Slot No.
LTE

Number of LBBP BTS3900, BTS3900

IbdlInfo IBDLNum
Data Links LTE
 BTS3900, BTS3900
IbdlInfo IBDLId BBP Data Link ID
LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLStatus
Status LTE

BTS3900, BTS3900
IbdlInfo OdiId ODI ID
LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLInPortId
Input Port No. LTE

BBP Data Link BTS3900, BTS3900

IbdlInfo IBDLOutPortId
Output Port No. LTE

IBDLLoopbackDela BBP Data Link BTS3900, BTS3900

IbdlInfo
y Loopback Delay LTE

BBP Data Link

IBDLLoopbackTime BTS3900, BTS3900
IbdlInfo Loopback Timeout
outNum LTE
Counter

BTS3900, BTS3900
IbdlInfo BoardCabinetNo Board Cabinet No.
LTE

BTS3900, BTS3900
IbdlInfo BoardSubrackNo Board Subrack No.
LTE

BTS3900, BTS3900
IbdlInfo BoardSlotNo Board Slot No.
LTE

BTS3900, BTS3900
IbdlInfo BbpDataLinkType BBP Data Link Type
LTE
TimeAlignmentTime BTS3900, BTS3900
LocalCellId Local cell ID
r LTE

TimeAlignmentTime TimeAlignmentTime Uplink time BTS3900, BTS3900

r r alignment timer LTE
 Uplink timing
TimeAlignmentTime TimingAdvCmdOpt BTS3900, BTS3900
advance command
r Switch LTE
optimization switch
TimeAlignmentTime Timing BTS3900, BTS3900
TimingMeasMode
r Measurement Mode LTE
TimeAlignmentTime TA Command BTS3900, BTS3900
TACmdSendPeriod
r Sending Period LTE
TimeAlignmentTime TimingResOptSwitc Timing Resource BTS3900, BTS3900
r h Optimization Switch LTE
 Pucch Timing Offset
TimeAlignmentTime PucchTimeOffsetCo BTS3900, BTS3900
Compensation
r mpVal LTE
Value

BTS3900, BTS3900
UeTimerConst LocalCellId Local cell ID
LTE

BTS3900, BTS3900
UeTimerConst T300 Timer 300
LTE
 BTS3900, BTS3900
UeTimerConst T301 Timer 301
LTE

BTS3900, BTS3900
UeTimerConst T310 Timer 310
LTE

BTS3900, BTS3900
UeTimerConst T311 Timer 311
LTE

BTS3900, BTS3900
UeTimerConst N311 Constant N311
LTE

BTS3900, BTS3900
UeTimerConst N310 Constant N310
LTE
 BTS3900, BTS3900
Cell LocalCellId Local Cell ID
LTE

BTS3900, BTS3900
Cell CellName Cell Name
LTE

BTS3900, BTS3900
Cell CsgInd Csg indicator
LTE
 Uplink cyclic prefix BTS3900, BTS3900
Cell UlCyclicPrefix
length LTE
 Downlink cyclic BTS3900, BTS3900
Cell DlCyclicPrefix
prefix length LTE
 BTS3900, BTS3900
Cell FreqBand Frequency band
LTE

Uplink EARFCN BTS3900, BTS3900

Cell UlEarfcnCfgInd
indication LTE
 BTS3900, BTS3900
Cell UlEarfcn Uplink EARFCN
LTE

BTS3900, BTS3900
Cell DlEarfcn Downlink EARFCN
LTE
 BTS3900, BTS3900
Cell UlBandWidth Uplink bandwidth
LTE
 BTS3900, BTS3900
Cell DlBandWidth Downlink bandwidth
LTE

BTS3900, BTS3900
Cell CellId Cell ID
LTE
 BTS3900, BTS3900
Cell PhyCellId Physical cell ID
LTE

AdditionalSpectrum Additional spectrum BTS3900, BTS3900

Cell
Emission emission LTE
 BTS3900, BTS3900
Cell CellActiveState Cell active state
LTE

BTS3900, BTS3900
Cell CellAdminState Cell admin state
LTE

Cell middle block BTS3900, BTS3900

Cell CellMidBlkTimer
timer LTE
 Cell FDD TDD BTS3900, BTS3900
Cell FddTddInd
indication LTE
 SubframeAssignme Subframe BTS3900, BTS3900
Cell
nt assignment LTE
 SpecialSubframePa Special subframe BTS3900, BTS3900
Cell
tterns patterns LTE
 BTS3900, BTS3900
Cell CellSpecificOffset Cell specific offset
LTE
 BTS3900, BTS3900
Cell QoffsetFreq Frequency offset
LTE
 Root sequence BTS3900, BTS3900
Cell RootSequenceIdx
index LTE
 BTS3900, BTS3900
Cell HighSpeedFlag High speed flag
LTE
 BTS3900, BTS3900
Cell PreambleFmt Preamble format
LTE
 BTS3900, BTS3900
Cell CellRadius Cell radius
LTE
 Customized
CustomizedBandWi BTS3900, BTS3900
Cell bandwidth
dthCfgInd LTE
configure indicator
 CustomizedULBand Customized uplink BTS3900, BTS3900
Cell
Width bandwidth LTE
 CustomizedDLBand Customized BTS3900, BTS3900
Cell
Width downlink bandwidth LTE

EmergencyAreaIdC Emergency Area Id BTS3900, BTS3900

Cell
fgInd indicator LTE
 BTS3900, BTS3900
Cell EmergencyAreaId Emergency Area ID
LTE

Ue max power
BTS3900, BTS3900
Cell UePowerMaxCfgInd allowed configure
LTE
indicator

Max transmit power BTS3900, BTS3900

Cell UePowerMax
allowed LTE
 Flag of Multi-RRU BTS3900, BTS3900
Cell MultiRruCellFlag
Cell LTE
 Mode of Multi-RRU BTS3900, BTS3900
Cell MultiRruCellMode
Cell LTE
 BTS3900, BTS3900
Cell CPRICompression CPRI Compression
LTE

Physical Cell BTS3900, BTS3900

Cell SectorEqmNum
Number of SFN Cell LTE
 BTS3900, BTS3900
Cell AirCellFlag Air Cell Flag
LTE
 BTS3900, BTS3900
Cell CrsPortNum CRS Port Number
LTE
 Cell transmission BTS3900, BTS3900
Cell TxRxMode
and reception mode LTE

BTS3900, BTS3900
Cell UserLabel User label
LTE
 BTS3900, BTS3900
Cell WorkMode Work mode
LTE

EuCellStandbyMod BTS3900, BTS3900

Cell Cell Standby Mode
e LTE
 CRS Antenna Port BTS3900, BTS3900
Cell CrsPortMap
Mapping LTE

CpriEthCompressio CPRI Ethernet BTS3900, BTS3900

Cell
nRatio Compression Ratio LTE
 BTS3900, BTS3900
Cell CellState Cell instance state
LTE

Reason for latest BTS3900, BTS3900

Cell CellLatestAvailState
state change LTE

CellLatestSetupTim Cell latest setup BTS3900, BTS3900

Cell
e time LTE
 CellLatestSetupTyp Cell latest setup BTS3900, BTS3900
Cell
e operate type LTE

CellLatestRemoveT Cell latest remove BTS3900, BTS3900

Cell
ime time LTE
 CellLatestRemoveT Cell latest remove BTS3900, BTS3900
Cell
ype operate type LTE
 CellPowerSaveStat Cell power save BTS3900, BTS3900
Cell
e state LTE

Primary BBP BTS3900, BTS3900

Cell MainBbpInfo
information LTE
 BTS3900, BTS3900
Cell CellTopoType Cell topology type
LTE

RF module cabinet BTS3900, BTS3900

Cell CabinetNo
number LTE

RF module subrack BTS3900, BTS3900

Cell SubrackNo
number LTE

RF module slot BTS3900, BTS3900

Cell SlotNo
number LTE

SymbolShutdownSt Symbol shutdown BTS3900, BTS3900

Cell
ate state LTE

Maximum transmit BTS3900, BTS3900

Cell MaxTxPower
power LTE

BTS3900, BTS3900
Cell eNodeBId eNodeB ID
LTE

BTS3900, BTS3900
Cell BbpCabinetNo BBP Cabinet No.
LTE
 BTS3900, BTS3900
Cell BbpSubrackNo BBP Subrack No.
LTE

BTS3900, BTS3900
Cell BbpSlotNo BBP Slot No.
LTE

BTS3900, BTS3900
Cell Status Work Status
LTE

Coordinating Local BTS3900, BTS3900

Cell CoLocalCellId
Cell ID LTE

BTS3900, BTS3900
Cell CellSlaveBand Cell Slave Band
LTE
 MultiBand.FreqBan BTS3900, BTS3900
Cell Frequency band
d LTE

CnOpSharingGroup CN Operator BTS3900, BTS3900

Cell
Id Sharing Group ID LTE

RF Module BTS3900, BTS3900

Cell RfModuleInfo
Information LTE

Served BBP BTS3900, BTS3900

Cell ServedBbpInfo
Information LTE

BTS3900, BTS3900
Cell OneRruCellNum 1 RRU Cell Number
LTE

BTS3900, BTS3900
Cell TwoRruCellNum 2 RRU Cell Number
LTE

BTS3900, BTS3900
Cell ThreeRruCellNum 3 RRU Cell Number
LTE

BTS3900, BTS3900
Cell FourRruCellNum 4 RRU Cell Number
LTE

BTS3900, BTS3900
Cell FiveRruCellNum 5 RRU Cell Number
LTE

BTS3900, BTS3900
Cell SixRruCellNum 6 RRU Cell Number
LTE

BTS3900, BTS3900
Cell SevenRruCellNum 7 RRU Cell Number
LTE

eUCellSectorEqm(E
eUCellSectorEqmN BTS3900, BTS3900
Cell uSectorEqmGroup)
um LTE
Number
 Number of Cells
BTS3900, BTS3900
Cell OpFailCellNum Where Adjustment
LTE
Fails

Number of Cells
BTS3900, BTS3900
Cell OpSuccCellNum Where Adjustment
LTE
Succeeds

CSI Reference BTS3900, BTS3900

Cell CsiRsPeriod
Signals Period LTE

ConnectedBbpPortI Connected BBP BTS3900, BTS3900

Cell
nfo Port Information LTE

BTS3900, BTS3900
Cell TxNo TX Channel No.
LTE

BTS3900, BTS3900
Cell RxNo RX Channel No.
LTE

BbpPrimarySecond BTS3900, BTS3900

Cell BBP Cabinet No.
aryMode LTE
 Intra Frequency
IntraFreqRanSharin BTS3900, BTS3900
Cell RAN Sharing
gInd LTE
Indication

IntraFreq ANR BTS3900, BTS3900

Cell IntraFreqAnrInd
Indication LTE
 SSP6 DwPTS BTS3900, BTS3900
Cell Ssp6DwPTSMode
Mode LTE

Cell Scale BTS3900, BTS3900

Cell CellScaleInd
Indication LTE

ANR Frequency BTS3900, BTS3900

Cell FreqPriorityForAnr
Priority LTE

Coordinating Cell BTS3900, BTS3900

Cell CoCellRouteType
Route Type LTE
 Coordinating Cell BTS3900, BTS3900
Cell CoCellEnodebId
eNodeB ID LTE

Coordinating Sector
BTS3900, BTS3900
Cell CoSectorEqmId Equipment(group)
LTE
ID

Coordinating Sector
BTS3900, BTS3900
Cell CoSectorEnodebId Equipment(group)
LTE
eNB ID

CellRadiusStartLoc Cell Radius Start BTS3900, BTS3900

Cell
ation Location LTE

Anti Interfere Status

InterfHighSpeedSta BTS3900, BTS3900
Cell in High Speed
tus LTE
Scenario

Serving Sector
BTS3900, BTS3900
Cell SrvSectorEqmId Equipment(group)
LTE
ID

Serving Sector
SrvSectorEqmEnod BTS3900, BTS3900
Cell Equipment(Group)
eBId LTE
eNB ID
 Coordinating Sector BTS3900, BTS3900
Cell CoSectorEqmType
Equipment Type LTE

ServingSectorEqmT Serving Sector BTS3900, BTS3900

Cell
ype Equipment Type LTE

Sector equipment BTS3900, BTS3900

SfnAuxResBind SectorEqmId
ID LTE

BTS3900, BTS3900
SfnAuxResBind eNodeBId Main eNodeB ID
LTE

Main eNodeB Local BTS3900, BTS3900

SfnAuxResBind LocalCellId
cell ID LTE

Baseband BTS3900, BTS3900

SfnAuxResBind BaseBandEqmId
equipment ID LTE

ReferenceSignalPw Reference signal BTS3900, BTS3900

SfnAuxResBind
r power LTE

ReferenceSignalPw Reference Signal BTS3900, BTS3900

SfnAuxResBind
rMargin Power Margin LTE
 SectorCpriCompres Sector CPRI BTS3900, BTS3900
SfnAuxResBind
sion Compression LTE

Sector equipment BTS3900, BTS3900

SfnAuxResGrpBind SectorEqmGroupId
Group ID LTE

BTS3900, BTS3900
SfnAuxResGrpBind eNodeBId Main eNodeB ID
LTE

Main eNodeB Local BTS3900, BTS3900

SfnAuxResGrpBind LocalCellId
cell ID LTE
 Baseband BTS3900, BTS3900
SfnAuxResGrpBind BaseBandEqmId
equipment ID LTE

ReferenceSignalPw Reference signal BTS3900, BTS3900

SfnAuxResGrpBind
r power LTE

SFN Sector
BTS3900, BTS3900
SfnAuxResGrpBind SfnSectorEqmRef Equipment
LTE
Reference

SfnSectorEqmRefT Sector equipment BTS3900, BTS3900

SfnAuxResGrpBind
ype.SectorEqmId ID LTE

SectorGroupCpriCo Sector Group CPRI BTS3900, BTS3900

SfnAuxResGrpBind
mpression Compression LTE
 BTS3900, BTS3900
SfnCellBind LocalCellId Local cell ID
LTE

Slave site eNodeB BTS3900, BTS3900

SfnCellBind eNodeBId
ID LTE

BTS3900, BTS3900
CellBackOff LocalCellId Local Cell ID
LTE

Inter-Frequency
InterFreqBackoffPrb BTS3900, BTS3900
CellBackOff Backoff PRB
Thd LTE
Threshold
 Inter-Frequency
InterFreqBackoffUe BTS3900, BTS3900
CellBackOff Backoff UE Number
NumThd LTE
Threshold
 RB Priority MCS
RBPriMcsSelectTrig BTS3900, BTS3900
CellBackOff Selection Trigger
PrbThd LTE
PRB Threshold
 RB Priority MCS
RBPriMcsSelectSto BTS3900, BTS3900
CellBackOff Selection Stop PRB
pPrbThd LTE
Threshold
 Lowest Efficiency BTS3900, BTS3900
CellBackOff LowestEffDlMcsThd
DL MCS Threshold LTE

Low Efficiency DL BTS3900, BTS3900

CellBackOff LowEffDlMcsThd
MCS Threshold LTE
 Low Efficiency DL BTS3900, BTS3900
CellBackOff LowEffDlFactorA
Factor A LTE

Low Efficiency DL BTS3900, BTS3900

CellBackOff LowEffDlFactorK
Factor K LTE
 Lowest Efficiency BTS3900, BTS3900
CellBackOff LowestEffUlMcsThd
UL MCS Threshold LTE

Low Efficiency UL BTS3900, BTS3900

CellBackOff LowEffUlMcsThd
MCS Threshold LTE
 Low Efficiency UL BTS3900, BTS3900
CellBackOff LowEffUlFactorA
Factor A LTE

Low Efficiency UL BTS3900, BTS3900

CellBackOff LowEffUlFactorK
Factor K LTE
 UL Heavy Traffic
UlHeavyTrafficTtiPr BTS3900, BTS3900
CellBackOff TTI Proportion
oporThd LTE
Threshold

UlTrafficMlbUeNum UL Traffic MLB UE BTS3900, BTS3900

CellBackOff
Thd Number Thresold LTE

UlHeavyTrafficJudg UL Heavy Traffic BTS3900, BTS3900

CellBackOff
ePeriod Judge Period LTE

BTS3900, BTS3900
CellBf LocalCellId Local cell ID
LTE
 Beamforming
BTS3900, BTS3900
CellBf MaxBfRankPara maximum number
LTE
of layers

Cell Channel
BTS3900, BTS3900
CellBf ChCalIndex Calibration
LTE
Operation Index

Cell Channel
BTS3900, BTS3900
CellBf ChCalType Calibration
LTE
Operation Type

Cell Channel
BTS3900, BTS3900
CellBf ChCalResult Calibration
LTE
Operation Result

Cell Channel
BTS3900, BTS3900
CellBf ChCalTime Calibration
LTE
Operation Time

BTS3900, BTS3900
CellBf eNodeBId eNodeB ID
LTE

RF Module BTS3900, BTS3900

CellBf RfModuleInfo
Information LTE

BTS3900, BTS3900
CellBf RxNo RX Channel No.
LTE

BTS3900, BTS3900
CellBf TxNo TX Channel No.
LTE
 BTS3900, BTS3900
CellBf RxChCINR Rx Channel CINR
LTE

BTS3900, BTS3900
CellBf TxChCINR Tx Channel CINR
LTE

Dual Layer
DualLayerBFAlgTyp BTS3900, BTS3900
CellBf Beamforming
e LTE
Algorithm Type

BTS3900, BTS3900
CellCqiAdjAlgo LocalCellId Local cell ID
LTE
 Initial Downlink BTS3900, BTS3900
CellCqiAdjAlgo InitDlIblerTarget
IBLER Target LTE

BTS3900, BTS3900
CellCqiAdjAlgo InitDeltaCqi Initial Delta Cqi
LTE
 BTS3900, BTS3900
CellCqiAdjAlgo CqiAdjStep CQI Adjust Step
LTE

CqiFilterCoefForMc CQI Filter BTS3900, BTS3900

CellCqiAdjAlgo
s Coefficient for MCS LTE

BTS3900, BTS3900
CellCsiRsParaCfg LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
CellCsiRsParaCfg CsiRsSwitch CSI-RS Switch
LTE

BTS3900, BTS3900
CellCsiRsParaCfg CsiRsPeriod CSI-RS Period
LTE

BTS3900, BTS3900
CellCsiRsParaCfg CsiRsState CsiRs State
LTE
 CsiRsConfigUserNu CSI-RS Config User BTS3900, BTS3900
CellCsiRsParaCfg
mTh Number Threshold LTE
 CSI-RS Unconfig
CsiRsUnconfigUser BTS3900, BTS3900
CellCsiRsParaCfg User Number
NumTh LTE
Threshold
 CsiRsConfigUserRa CSI-RS Config User BTS3900, BTS3900
CellCsiRsParaCfg
tioTh Ratio Threshold LTE
 CSI-RS Unconfig
CsiRsUnconfigUser BTS3900, BTS3900
CellCsiRsParaCfg User Ratio
RatioTh LTE
Threshold

BTS3900, BTS3900
CellCspcPara LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellCspcPara CellCspcSwitch Cell CSPC Switch
LTE

CSPC UE SRS
CspcRapidRptSwitc BTS3900, BTS3900
CellCspcPara Config Rapid
h LTE
Report Switch
 CSPC UE SRS
CspcUeSrsCfgRptP BTS3900, BTS3900
CellCspcPara Config Report
eriod LTE
Period

Uplink RSRP
BTS3900, BTS3900
CellCspcPara UlRsrpRptPeriod Measurement
LTE
Report Period

CSPC CQI Filter BTS3900, BTS3900

CellCspcPara CspcCqiFilterCoeff
Coefficient LTE
 UlRsrpPhyFilterCoe Uplink RSRP PHY BTS3900, BTS3900
CellCspcPara
ff Filter Coefficient LTE

UlRsrpRrmFilterCo Uplink RSRP RRM BTS3900, BTS3900

CellCspcPara
eff Filter Coefficient LTE

BTS3900, BTS3900
CellCspcPara CellCspcStatus Cell CSPC Status
LTE
 BTS3900, BTS3900
CellCspcPara Remarks Remarks
LTE

BTS3900, BTS3900
CellCspcPara MacroOrMicroCell Macro Or Micro Cell
LTE

BTS3900, BTS3900
CellCspcPara CellDlCompStatus Cell DlCoMP Status
LTE
 BTS3900, BTS3900
CellDLIcicMcPara LocalCellId Local cell ID
LTE

Downlink ICIC
BTS3900, BTS3900
CellDLIcicMcPara ReportInterval measurement
LTE
report interval

Downlink ICIC
BTS3900, BTS3900
CellDLIcicMcPara MaxReportCellNum measurement max
LTE
report cell number
 DownLink ICIC
BTS3900, BTS3900
CellDLIcicMcPara ReportAmount measurement
LTE
report amount

DownLink ICIC
BTS3900, BTS3900
CellDLIcicMcPara ReportQuantity measurement
LTE
report quantity

DownLink ICIC
BTS3900, BTS3900
CellDLIcicMcPara TriggerQuantity measurement
LTE
trigger quantity
 DownLink ICIC
BTS3900, BTS3900
CellDLIcicMcPara Hysteresis measurement
LTE
hysteresis

DownLink ICIC
BTS3900, BTS3900
CellDLIcicMcPara TimeToTrigger measurement time
LTE
to trigger
 Downlink ICIC A3 BTS3900, BTS3900
CellDLIcicMcPara A3Offset
offset LTE
 Downlink ICIC A6 BTS3900, BTS3900
CellDLIcicMcPara A6Offset
offset LTE

BTS3900, BTS3900
CellDss LocalCellId Local cell ID
LTE

HighFreqShareRbN Shared RB Number BTS3900, BTS3900

CellDss
um in High Frequency LTE
 LowFreqShareRbN Shared RB Number BTS3900, BTS3900
CellDss
um in Low Frequency LTE

BTS3900, BTS3900
CellDss ReMuteSwitch Mute RE Switch
LTE
 UL Narrowband
UlInterfRestrictionM BTS3900, BTS3900
CellDss Interference
ode LTE
Restriction Mode
 BTS3900, BTS3900
CellDss A3Offset A3 Offset
LTE
 BTS3900, BTS3900
CellDss A6Offset A6 Offset
LTE
 Near Area Sinr BTS3900, BTS3900
CellDss NearAreaSinrThd
Threshold LTE
 Middle Area Sinr BTS3900, BTS3900
CellDss MiddleAreaSinrThd
Threshold LTE
 Far Area Sinr BTS3900, BTS3900
CellDss FarAreaSinrThd
Threshold LTE

Interference
InterfNCellConfigM BTS3900, BTS3900
CellDss Neighbour Cell
ode LTE
Configuration Mode

CellDynAcBarAlgoP BTS3900, BTS3900

LocalCellId Local Cell ID
ara LTE

Dynamic AC
CellDynAcBarAlgoP DynAcBarStatPerio BTS3900, BTS3900
Barring Control
ara d LTE
Statistic Period
 Dynamic AC
CellDynAcBarAlgoP DynAcBarTriggerTh BTS3900, BTS3900
Barring Control
ara d LTE
Trigger Threshold

Dynamic AC
CellDynAcBarAlgoP DynAcBarCancelTh BTS3900, BTS3900
Barring Control
ara d LTE
Cancel Threshold

Ssac Trigger
CellDynAcBarAlgoP SsacTriggerCondS BTS3900, BTS3900
Condition Satisfied
ara atiPeriods LTE
Periods
 Ssac Cancel
CellDynAcBarAlgoP SsacCancelCondS BTS3900, BTS3900
Condition Satisfied
ara atiPeriods LTE
Periods

CellDynAcBarAlgoP DisasterReferenceI Disaster Reference BTS3900, BTS3900

ara nd Indication LTE

CellDynAcBarAlgoP BTS3900, BTS3900

DisasterDuration Disaster Duration
ara LTE
 MO Trigger
CellDynAcBarAlgoP MoTriggerCondSati BTS3900, BTS3900
Condition Satisfied
ara Periods LTE
Periods

MO Cancel
CellDynAcBarAlgoP MoCancelCondSati BTS3900, BTS3900
Condition Satisfied
ara Periods LTE
Periods

BTS3900, BTS3900
CellEicic LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
CellEicic AbsPattern Abs pattern
LTE

EicicMeasureEnabl Eicic Measure BTS3900, BTS3900

CellEicic
e Enable LTE
 BTS3900, BTS3900
CellEicic A3Offset eICIC A3 Offset
LTE

Abs Adjustment BTS3900, BTS3900

CellEicic AbsAdjPeriod
Period LTE

BTS3900, BTS3900
CellFrameOffset LocalCellId Local Cell ID
LTE
 BTS3900, BTS3900
CellFrameOffset FrameOffsetMode Frame Offset Mode
LTE

BTS3900, BTS3900
CellFrameOffset FrameOffset Frame Offset
LTE

BTS3900, BTS3900
CellIIcsPara LocalCellId Local cell ID
LTE
 IicsUserAttrA3Offse IICS User Attribute BTS3900, BTS3900
CellIIcsPara
t A3 offset LTE
 IICS User Attribute BTS3900, BTS3900
CellIIcsPara IicsUserAttrThd
threshold LTE

BTS3900, BTS3900
CellLowPower LocalCellId Local cell ID
LTE

Low power
BTS3900, BTS3900
CellLowPower LowPwrSwitch consumption mode
LTE
switch

Low power
BTS3900, BTS3900
CellLowPower LowPwrOrder consumption mode
LTE
order
 BTS3900, BTS3900
CellLowPower StartTime Start time
LTE

BTS3900, BTS3900
CellLowPower StopTime Stop time
LTE

CellUsedPwrReduc Cell used power BTS3900, BTS3900

CellLowPower
eTimeLen reduce time length LTE

Reference signal
RsPwrReduceTime BTS3900, BTS3900
CellLowPower power reduce time
Len LTE
length
 RfShutDownTimeLe RF shutdown time BTS3900, BTS3900
CellLowPower
n length LTE

Cell used power BTS3900, BTS3900

CellLowPower CellUsedPwrRatio
ratio LTE

Reference signal BTS3900, BTS3900

CellLowPower RsPwrAdjOffset
power adjust offset LTE
 Time length for
entering the low BTS3900, BTS3900
CellLowPower EnterTimeLen
power consumption LTE
mode

Back power save BTS3900, BTS3900

CellLowPower BakPwrSavPolicy
policy LTE

BTS3900, BTS3900
CellMBMSCfg LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellMBMSCfg MBSFNAreaId MBSFN Area ID
LTE

MBSFN
BTS3900, BTS3900
CellMBMSCfg MBSFNSyncAreaId synchronization
LTE
Area ID

MBMSSessionTMG MBMS Session BTS3900, BTS3900

CellMBMSCfg
I TMGI LTE
 BTS3900, BTS3900
CellMBMSCfg MBMSSwitch MBMS switch
LTE

BTS3900, BTS3900
CellMBMSCfg ServiceAreaIdList Service Area ID List
LTE

ServiceAreaIdRef.S BTS3900, BTS3900

CellMBMSCfg Service Area ID
erviceAreaId LTE

MBMSServiceSwitc MBMS Service BTS3900, BTS3900

CellMBMSCfg
h Switch LTE

Neighbor Cell
NCellMbmsCfgSwit BTS3900, BTS3900
CellMBMSCfg MBMS Config
ch LTE
Switch

BTS3900, BTS3900
CellMlbUeSel LocalCellId Local Cell ID
LTE

UE Select PRB BTS3900, BTS3900

CellMlbUeSel UeSelectPrbPrio
Priority LTE
 UE Select QCI BTS3900, BTS3900
CellMlbUeSel UeSelectQciPrio
Priority LTE

UE Select ARP BTS3900, BTS3900

CellMlbUeSel UeSelectArpPrio
Priority LTE

UE Select DL MCS BTS3900, BTS3900

CellMlbUeSel UeSelectDlMcsPrio
Priority LTE

Inter-Freq MLB UE
InterFreqMlbUeArp BTS3900, BTS3900
CellMlbUeSel Select ARP
Thd LTE
Threshold

Inter-Freq MLB UE
InterFreqMlbUeDlM BTS3900, BTS3900
CellMlbUeSel Select DL MCS
csThd LTE
Threshold

BTS3900, BTS3900
CellMro LocalCellId Local cell ID
LTE
 CIO adjustment
BTS3900, BTS3900
CellMro CioAdjLimitCfgInd range configuration
LTE
indicator
 CIO adjustment BTS3900, BTS3900
CellMro CioAdjUpperLimit
upper limit LTE
 CIO adjustment BTS3900, BTS3900
CellMro CioAdjLowerLimit
lower limit LTE

InterFreqA2RsrpUp Interfreq A2 RSRP BTS3900, BTS3900

CellMro
Limit Upper Limit LTE

InterFreqA2RsrpLo Interfreq A2 RSRP BTS3900, BTS3900

CellMro
wLimit Lower Limit LTE

A3 based Interfreq
A3InterFreqA2Rsrp BTS3900, BTS3900
CellMro A2 RSRP Upper
UpLimit LTE
Limit

A3 based Interfreq
A3InterFreqA2Rsrp BTS3900, BTS3900
CellMro A2 RSRP Lower
LowLimit LTE
Limit
 Interfreq MRO
InterFreqMroAdjPar BTS3900, BTS3900
CellMro Adjust Parameters
aSel LTE
Selection

BTS3900, BTS3900
CellPcAlgo LocalCellId Local Cell ID
LTE
 Srs Power Control BTS3900, BTS3900
CellPcAlgo SrsPcStrategy
Strategy LTE
 PucchCloseLoopPc PUCCH Close Loop BTS3900, BTS3900
CellPcAlgo
Type Power Control Type LTE

Pucch Power BTS3900, BTS3900

CellPcAlgo PucchPcPeriod
Control Period LTE
 Pucch Power
PucchPcTargetSinr BTS3900, BTS3900
CellPcAlgo Control Target Sinr
Offset LTE
Offset

PUSCH RSRP High BTS3900, BTS3900

CellPcAlgo PuschRsrpHighThd
Threshold LTE
 PuschIoTCtrlA3Offs Pusch IoT Control BTS3900, BTS3900
CellPcAlgo
et A3Offset LTE
 IoTNearPointOptSw IoT NearPoint BTS3900, BTS3900
CellPcAlgo
itch Optimization Switch LTE
 IoTNearPointPLThr IoT NearPoint BTS3900, BTS3900
CellPcAlgo
eshold PathLoss Threshold LTE

SRS Power Control BTS3900, BTS3900

CellPcAlgo SrsPcSinrTarget
SINR Target LTE
 SRS Power Control BTS3900, BTS3900
CellPcAlgo SrsPcRsrpTarget
RSRP Target LTE

PUSCHPsdCtrlTarg PUSCH PSD BTS3900, BTS3900

CellPcAlgo
et Control Target LTE
 Close Loop
CloseLoopOptPUS BTS3900, BTS3900
CellPcAlgo Optimization
CHType LTE
PUSCH Type
 PUSCH
PUSCHOptIBLERT BTS3900, BTS3900
CellPcAlgo Optimization IBLER
hreshold LTE
Threshold
 PUSCH PSD
PUSCHPsdCtrlTarg BTS3900, BTS3900
CellPcAlgo Control Target for
etForUs LTE
Unlimited Service
 IoTCtrlINCorrectSwi IoT Control IN BTS3900, BTS3900
CellPcAlgo
tch Correct Switch LTE

IoT Control Edge

IoTCtrlEUPLThresh BTS3900, BTS3900
CellPcAlgo UE Pathloss
old LTE
Threshold
 IoT Control NI BTS3900, BTS3900
CellPcAlgo IoTCtrlNIThreshold
Threshold LTE

BTS3900, BTS3900
CellPrbValMlb LocalCellId Loacal Cell ID
LTE

PRB Valuation MLB BTS3900, BTS3900

CellPrbValMlb PrbValMlbTrigThd
Trigger Threshold LTE
 PRB Valuation MLB BTS3900, BTS3900
CellPrbValMlb PrbValMlbAdmitThd
Admit Threshold LTE

Mlb UE Selection
MlbUeSelectPrbVal BTS3900, BTS3900
CellPrbValMlb PRB Valuation
Thd LTE
Threshold

PRB Valuation Filter BTS3900, BTS3900

CellPrbValMlb PrbValFilterFactor
Factor LTE

BTS3900, BTS3900
CellRachAlgo LocalCellId Local cell ID
LTE
 PRACH False
PrachFalseAlarmDe BTS3900, BTS3900
CellRachAlgo Alarm Detect
tRadThd LTE
Radius Threshold
 RachThdBoostRati RACH Threshold BTS3900, BTS3900
CellRachAlgo
o Boosting Ratio LTE

Conflict Cell Mobile BTS3900, BTS3900

CellRachAlgo ConflictCellMnc
Network Code LTE

BTS3900, BTS3900
CellRachAlgo ConflicteNodeBId Conflict eNodeB ID
LTE

BTS3900, BTS3900
CellRachAlgo ConflictCellId Conflict Cell ID
LTE

Conflict Cell Mobile BTS3900, BTS3900

CellRachAlgo ConflictCellMcc
Country Code LTE
 Prach Interference BTS3900, BTS3900
CellRachAlgo PrachInterfPeriod
Period LTE

PrachInterfThreshol Prach Interference BTS3900, BTS3900

CellRachAlgo
d Threshold LTE
 PrachInterfHysteres Prach Interference BTS3900, BTS3900
CellRachAlgo
is Hysteresis LTE

BTS3900, BTS3900
CellRacThd LocalCellId Local cell ID
LTE

Gold service arp BTS3900, BTS3900

CellRacThd GoldServiceArpThd
threshold LTE

SilverServiceArpTh Silver service arp BTS3900, BTS3900

CellRacThd
d threshold LTE
 QCI1 handover BTS3900, BTS3900
CellRacThd Qci1HoThd
admission threshold LTE

QCI2 handover BTS3900, BTS3900

CellRacThd Qci2HoThd
admission threshold LTE
 QCI3 handover BTS3900, BTS3900
CellRacThd Qci3HoThd
admission threshold LTE

QCI4 handover BTS3900, BTS3900

CellRacThd Qci4HoThd
admission threshold LTE
 Gold new service
NewGoldServiceOff BTS3900, BTS3900
CellRacThd admission threshold
set LTE
offset
 Silver new service
NewSilverServiceOf BTS3900, BTS3900
CellRacThd admission threshold
fset LTE
offset
 Bronze new service
NewCopperService BTS3900, BTS3900
CellRacThd admission threshold
Offset LTE
offset
 QCI1 congest BTS3900, BTS3900
CellRacThd Qci1CongThd
threshold LTE
 QCI2 congest BTS3900, BTS3900
CellRacThd Qci2CongThd
threshold LTE
 QCI3 congest BTS3900, BTS3900
CellRacThd Qci3CongThd
threshold LTE
 QCI4 congest BTS3900, BTS3900
CellRacThd Qci4CongThd
threshold LTE
 Offset for service BTS3900, BTS3900
CellRacThd CongRelOffset
congest relieving LTE
 Uplink RB used BTS3900, BTS3900
CellRacThd UlRbHighThd
ratio high threshold LTE
 Uplink RB used BTS3900, BTS3900
CellRacThd UlRbLowThd
ratio low threshold LTE

Admission Control
AcReservedUserNu BTS3900, BTS3900
CellRacThd Reserved User
mber LTE
Number

BTS3900, BTS3900
CellRfShutdown LocalCellId Local cell ID
LTE

RF intelligent BTS3900, BTS3900

CellRfShutdown RfShutdownSwitch
shutdown switch LTE
 BTS3900, BTS3900
CellRfShutdown StartTime Start time
LTE

BTS3900, BTS3900
CellRfShutdown StopTime Stop time
LTE

Reference signal BTS3900, BTS3900

CellRfShutdown RsPwrAdjOffset
power adjust offset LTE

Downlink PRB BTS3900, BTS3900

CellRfShutdown DlPrbThd
threshold LTE

Uplink PRB BTS3900, BTS3900

CellRfShutdown UlPrbThd
threshold LTE

Downlink PRB BTS3900, BTS3900

CellRfShutdown DlPrbOffset
offset LTE
 BTS3900, BTS3900
CellRfShutdown UlPrbOffset Uplink PRB offset
LTE

UE Number BTS3900, BTS3900

CellRfShutdown UENumThd
Threshold LTE
 Current status
BTS3900, BTS3900
CellRfShutdown CurrentStatus about RF intelligent
LTE
shutdown
 Latest exiting cause
BTS3900, BTS3900
CellRfShutdown LatestExitingCause about RF intelligent
LTE
shutdown

BTS3900, BTS3900
CellRicAlgo LocalCellId Local cell ID
LTE

RIC algorithm BTS3900, BTS3900

CellRicAlgo RicAlgoSwitch
switch LTE
 MuteUpPTSSymNu Mute UpPTS BTS3900, BTS3900
CellRicAlgo
m Symbol Number LTE

Whether to mute UL BTS3900, BTS3900

CellRicAlgo MuteULSym
symbol LTE

BTS3900, BTS3900
CellServiceDiffCfg LocalCellId Local cell ID
LTE
 Service
BTS3900, BTS3900
CellServiceDiffCfg ServiceDiffSwitch differentiation
LTE
switch

Cell Congestion
CellConStatePrbTh BTS3900, BTS3900
CellServiceDiffCfg State PRB
d LTE
Threshold
 CellOverloadStateP Cell Overload State BTS3900, BTS3900
CellServiceDiffCfg
rbThd PRB Threshold LTE
 Cell Congestion
CellConStateUeNu BTS3900, BTS3900
CellServiceDiffCfg State UE Number
mThd LTE
Threshold
 Cell Overload State
CellOverloadStateU BTS3900, BTS3900
CellServiceDiffCfg UE Number
eNumThd LTE
Threshold

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 0
ht0 LTE

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 1
ht1 LTE
 QueueServiceWeig BTS3900, BTS3900
CellServiceDiffCfg Weight of queue 2
ht2 LTE

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 3
ht3 LTE

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 4
ht4 LTE

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 5
ht5 LTE

QueueServiceWeig BTS3900, BTS3900

CellServiceDiffCfg Weight of queue 6
ht6 LTE

BTS3900, BTS3900
CellShutdown LocalCellId Local cell ID
LTE

CellShutdownSwitc Intelligent power-off BTS3900, BTS3900

CellShutdown
h of carriers switch LTE

BTS3900, BTS3900
CellShutdown StartTime Start time
LTE

BTS3900, BTS3900
CellShutdown StopTime Stop time
LTE
 Downlink PRB BTS3900, BTS3900
CellShutdown DlPrbThd
threshold LTE

Downlink PRB BTS3900, BTS3900

CellShutdown DlPrbOffset
offset LTE

Uplink PRB BTS3900, BTS3900

CellShutdown UlPrbThd
threshold LTE

BTS3900, BTS3900
CellShutdown UlPrbOffset Uplink PRB offset
LTE

BTS3900, BTS3900
CellSrlte LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellSrlte SrlteSwitch SRLTE Switch
LTE
 SRLTE DTX BTS3900, BTS3900
CellSrlte SrlteDtxThrd
Threshold LTE

SRLTE Suspend BTS3900, BTS3900

CellSrlte SrlteSuspendTime
Time LTE
 BTS3900, BTS3900
CellULIcicMcPara LocalCellId Local cell ID
LTE

Uplink ICIC A3 BTS3900, BTS3900

CellULIcicMcPara A3Offset
offset LTE

BTS3900, BTS3900
CellUlschAlgo LocalCellId Local cell ID
LTE
 Uplink Scheduling BTS3900, BTS3900
CellUlschAlgo UlschStrategy
Strategy LTE
 adaptive HARQ BTS3900, BTS3900
CellUlschAlgo AdaptHarqSwitch
switch LTE
 SinrAdjustTargetIble SINR target IBLER BTS3900, BTS3900
CellUlschAlgo
r adjustment LTE

System Bandwidth
PreAllocationBand Ratio Used By Pre- BTS3900, BTS3900
CellUlschAlgo
widthRatio schedule user per LTE
TTI
 PreAllocationMinPe minimal period of BTS3900, BTS3900
CellUlschAlgo
riod pre-allocation LTE

data size of pre- BTS3900, BTS3900

CellUlschAlgo PreAllocationSize
allocation LTE

BTS3900, BTS3900
CellUlschAlgo UlHoppingType Uplink hopping type
LTE

FreeUserUlRbUsed Free Users Uplink BTS3900, BTS3900

CellUlschAlgo
Ratio RB Ratio LTE
 UL scheduling
BTS3900, BTS3900
CellUlschAlgo UlSrSchDateLen request user data
LTE
length

Semi-persistent
BTS3900, BTS3900
CellUlschAlgo SpsRelThd resource implicit
LTE
release threshold
 SmartPreAllocation Smart pre-allocation BTS3900, BTS3900
CellUlschAlgo
Duration duration LTE

UlEpfCapacityFacto Uplink EPF capacity BTS3900, BTS3900

CellUlschAlgo
r factor LTE
 Uplink Resource
UlRbAllocationStrat BTS3900, BTS3900
CellUlschAlgo Block Allocation
egy LTE
Strategy

Doppler BTS3900, BTS3900

CellUlschAlgo DopMeasLevel
Measurement Level LTE
 Uplink HARQ
Maximum BTS3900, BTS3900
CellUlschAlgo UlHarqMaxTxNum
Transmission LTE
Number

SmartPreAllocDura Sparse Smart Pre- BTS3900, BTS3900

CellUlschAlgo
ForSparse allocation Duration LTE
 Uplink Semi-
BTS3900, BTS3900
CellUlschAlgo UlSpsInterval persistent
LTE
Scheduling Interval
 SriFalseDetThdSwit Sri False Detect BTS3900, BTS3900
CellUlschAlgo
ch Threshold Switch LTE

No UL Scheduling
NoUlSchTtiNumAfft BTS3900, BTS3900
CellUlschAlgo TTI Number After
erGap LTE
GAP
 Uplink Delay-based
BTS3900, BTS3900
CellUlschAlgo UlDelaySchStrategy Scheduling
LTE
Strategy

Uplink Schedule
BTS3900, BTS3900
CellUlschAlgo UlSchAbnUeThd Abnormal Ue
LTE
Threshold
 Specific Packet BTS3900, BTS3900
CellUlschAlgo SpecificPktSizeThd
Size Threshold LTE

BTS3900, BTS3900
CellUlschAlgo SrMaskSwitch SR Masking Switch
LTE

PUSCH DTX
PuschDtxSchStrate BTS3900, BTS3900
CellUlschAlgo Scheduling
gy LTE
Strategy
 Max Number of UL
UlVoipRlcMaxSegN BTS3900, BTS3900
CellUlschAlgo RLC Segments for
um LTE
VoIP
 Uplink Enhanced
UlEnhencedVoipSc BTS3900, BTS3900
CellUlschAlgo Voip Schedule
hSw LTE
Switch
 Sinr Threshold of
UlInBasedFssSinrT BTS3900, BTS3900
CellUlschAlgo UL FSS by
hld LTE
Interference

Ul Coordinated
UlCamcDlRsrpOffs BTS3900, BTS3900
CellUlschAlgo AMC Dl RSRP
et LTE
Offset
 Statistic Num
StatisticNumThdFor BTS3900, BTS3900
CellUlschAlgo Threshold for TTIB
TtibTrig LTE
Trigger
 Statistic Num
StatisticNumThdFor BTS3900, BTS3900
CellUlschAlgo Threshold for TTIB
TtibExit LTE
Exit
 HystToExitTtiBundli Hysteresis to Exit BTS3900, BTS3900
CellUlschAlgo
ng TTI Bundling LTE
 TtiBundlingRlcMax TTIB Max Number BTS3900, BTS3900
CellUlschAlgo
SegNum of RLC Segments LTE

TTIB Max Number

TtiBundlingHarqMa BTS3900, BTS3900
CellUlschAlgo of HARQ
xTxNum LTE
Transmissions
 TtiBundlingTriggerS TTI Bundling BTS3900, BTS3900
CellUlschAlgo
trategy Trigger Strategy LTE

BTS3900, BTS3900
CellUlschAlgo DopAlgoSwitch Doppler Algo Switch
LTE
 EnhancedVmimoS Enhanced VMIMO BTS3900, BTS3900
CellUlschAlgo
witch Switch LTE

Ue Num Threshold
UeNumThdInPdcch BTS3900, BTS3900
CellUlschAlgo in PDCCH PUSCH
PuschBal LTE
Balance
 Data Threshold in
DataThdInPdcchPu BTS3900, BTS3900
CellUlschAlgo PDCCH and
schBal LTE
PUSCH Balance
 HeadOverheadFor Head Overhead For BTS3900, BTS3900
CellUlschAlgo
UlSch Uplink Scheduling LTE

Minimal Period of
PreAllocMinPeriodF BTS3900, BTS3900
CellUlschAlgo Sparse Pre-
orSparse LTE
allocation
 PreallocationSizeFo Data Size of Sparse BTS3900, BTS3900
CellUlschAlgo
rSparse Pre-allocation LTE

Uplink Interference
UlInterfRandomMod BTS3900, BTS3900
CellUlschAlgo Randomization
e LTE
Mode
 SINR Adjustment
SinrAdjTargetIblerfo BTS3900, BTS3900
CellUlschAlgo Target IBLER for
rVoLTE LTE
VoLTE

SFN Uplink Load BTS3900, BTS3900

CellUlschAlgo SfnUlLoadPeriod
Period LTE
 BTS3900, BTS3900
CellULUnifiedOLC LocalCellId Local Cell ID
LTE

High RRC Reject

RrcRejectRateHigh BTS3900, BTS3900
CellULUnifiedOLC Rate Thd for UL
Thd LTE
Uni-OLC
 Low RRC Reject
RrcRejectRateLowT BTS3900, BTS3900
CellULUnifiedOLC Rate Thd for UL
hd LTE
Uni-OLC
 High RRC Request
RrcReqNumHighTh BTS3900, BTS3900
CellULUnifiedOLC Number Thd for UL
d LTE
Uni-OLC
 Low RRC Request
RrcReqNumLowTh BTS3900, BTS3900
CellULUnifiedOLC Number Thd for UL
d LTE
Uni-OLC
 High UE Number BTS3900, BTS3900
CellULUnifiedOLC UeNumHighThd
Thd for UL Uni-OLC LTE
 Low UE Number BTS3900, BTS3900
CellULUnifiedOLC UeNumLowThd
Thd for UL Uni-OLC LTE

BTS3900, BTS3900
eNBCellRsvdPara LocalCellId Local cell ID
LTE
 Reserved Switch BTS3900, BTS3900
eNBCellRsvdPara RsvdSwPara0
Parameter 0 LTE
 Reserved Switch BTS3900, BTS3900
eNBCellRsvdPara RsvdSwPara1
Parameter 1 LTE
 Reserved Switch BTS3900, BTS3900
eNBCellRsvdPara RsvdSwPara2
Parameter 2 LTE
 Reserved Switch BTS3900, BTS3900
eNBCellRsvdPara RsvdSwPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara4
Parameter 4 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara5
Parameter 5 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara6
Parameter 6 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara7
Parameter 7 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara8
Parameter 8 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara9
Parameter 9 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara10
Parameter 10 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara11
Parameter 11 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara12
Parameter 12 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara13
Parameter 13 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara14
Parameter 14 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara15
Parameter 15 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara16
Parameter 16 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara17
Parameter 17 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara18
Parameter 18 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara19
Parameter 19 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara20
Parameter 20 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara21
Parameter 21 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara22
Parameter 22 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara23
Parameter 23 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara24
Parameter 24 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara25
Parameter 25 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara26
Parameter 26 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara27
Parameter 27 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara28
Parameter 28 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara29
Parameter 29 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara30
Parameter 30 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara31
Parameter 31 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara32
Parameter 32 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara33
Parameter 33 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara34
Parameter 34 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara35
Parameter 35 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara36
Parameter 36 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara37
Parameter 37 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara38
Parameter 38 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara39
Parameter 39 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara40
Parameter 40 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara41
Parameter 41 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara42
Parameter 42 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara43
Parameter 43 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara44
Parameter 44 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara45
Parameter 45 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara46
Parameter 46 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara47
Parameter 47 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara48
Parameter 48 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara49
Parameter 49 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara50
Parameter 50 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara51
Parameter 51 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara52
Parameter 52 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara53
Parameter 53 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara54
Parameter 54 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara55
Parameter 55 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara56
Parameter 56 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara57
Parameter 57 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara58
Parameter 58 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara59
Parameter 59 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara60
Parameter 60 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara61
Parameter 61 LTE
 Reserved BTS3900, BTS3900
eNBCellRsvdPara RsvdPara62
Parameter 62 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara63
Parameter 63 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara64
Parameter 64 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara65
Parameter 65 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara66
Parameter 66 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara67
Parameter 67 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara68
Parameter 68 LTE

Reserved BTS3900, BTS3900

eNBCellRsvdPara RsvdPara69
Parameter 69 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para1
Parameter 1 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para2
Parameter 2 LTE
 Reserved U32 BTS3900, BTS3900
eNBCellRsvdPara RsvdU32Para3
Parameter 3 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para4
Parameter 4 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para5
Parameter 5 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para6
Parameter 6 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para7
Parameter 7 LTE

Reserved U32 BTS3900, BTS3900

eNBCellRsvdPara RsvdU32Para8
Parameter 8 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para1
Parameter 1 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para2
Parameter 2 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para3
Parameter 3 LTE
 Reserved U16 BTS3900, BTS3900
eNBCellRsvdPara RsvdU16Para4
Parameter 4 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para5
Parameter5 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para6
Parameter 6 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para7
Parameter 7 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para8
Parameter 8 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para9
Parameter 9 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para10
Parameter10 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para11
Parameter 11 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para12
Parameter 12 LTE
 Reserved U16 BTS3900, BTS3900
eNBCellRsvdPara RsvdU16Para13
Parameter 13 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para14
Parameter 14 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para15
Parameter 15 LTE

Reserved U16 BTS3900, BTS3900

eNBCellRsvdPara RsvdU16Para16
Parameter 16 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para1
Parameter 1 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para2
Parameter 2 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para3
Parameter 3 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para4
Parameter 4 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para5
Parameter 5 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para6
Parameter 6 LTE
 Reserved U8 BTS3900, BTS3900
eNBCellRsvdPara RsvdU8Para7
Parameter 7 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para8
Parameter 8 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para9
Parameter 9 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para10
Parameter 10 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para11
Parameter 11 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para12
Parameter 12 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para13
Parameter 13 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para14
Parameter 14 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para15
Parameter 15 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para16
Parameter 16 LTE
 Reserved U8 BTS3900, BTS3900
eNBCellRsvdPara RsvdU8Para17
Parameter 17 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para18
Parameter 18 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para19
Parameter 19 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para20
Parameter 20 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para21
Parameter 21 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para22
Parameter 22 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para23
Parameter 23 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para24
Parameter 24 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para25
Parameter 25 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para26
Parameter 26 LTE
 Reserved U8 BTS3900, BTS3900
eNBCellRsvdPara RsvdU8Para27
Parameter 27 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para28
Parameter 28 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para29
Parameter 29 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para30
Parameter 30 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para31
Parameter 31 LTE

Reserved U8 BTS3900, BTS3900

eNBCellRsvdPara RsvdU8Para32
Parameter 32 LTE

InterRatCellShutdo BTS3900, BTS3900

LocalCellId Local cell ID
wn LTE

InterRatCellShutdo ForceShutdownSwit Inter-RAT cell BTS3900, BTS3900

wn ch shutdown switch LTE

InterRatCellShutdo BTS3900, BTS3900

StartTime Start time
wn LTE
InterRatCellShutdo BTS3900, BTS3900
StopTime Stop time
wn LTE

InterRatCellShutdo UE number BTS3900, BTS3900

BearNumThd
wn threshold LTE

InterRatCellShutdo Downlink PRB BTS3900, BTS3900

DlPrbThd
wn threshold LTE
InterRatCellShutdo Uplink PRB BTS3900, BTS3900
UlPrbThd
wn threshold LTE

InterRatCellShutdo BTS3900, BTS3900

ShutDownType Shut Down Type
wn LTE

InterRatCellShutdo High Priority ARP BTS3900, BTS3900

HighPriArpThd
wn Threshold LTE
 UTRAN Cell
InterRatCellShutdo UtranCellDlLoadTh BTS3900, BTS3900
Downlink Load
wn d LTE
Threshold

UTRAN Cell
InterRatCellShutdo UtranCellDlLoadOff BTS3900, BTS3900
Downlink Load
wn set LTE
Offset

InterRatCellShutdo UtranCellUlLoadTh UTRAN Cell Uplink BTS3900, BTS3900

wn d Load Threshold LTE

InterRatCellShutdo UtranCellUlLoadOff UTRAN Cell Uplink BTS3900, BTS3900

wn set Load Offset LTE
InterRatCellShutdo GERAN Cell Load BTS3900, BTS3900
GeranCellLoadThd
wn Threshold LTE

InterRatCellShutdo GeranCellLoadOffs GERAN Cell Load BTS3900, BTS3900

wn et Offset LTE

BTS3900, BTS3900
RruJointCalParaCfg LocalCellId Local cell ID
LTE
 Tx Channel BTS3900, BTS3900
RruJointCalParaCfg TxChnCalSwitch
Calibration Switch LTE

Tx Channel BTS3900, BTS3900

RruJointCalParaCfg TxChnCalTime
Calibration Time LTE
 Tx Channel BTS3900, BTS3900
RruJointCalParaCfg TxChnCalPeriod
Calibration Period LTE

Physical Antenna BTS3900, BTS3900

RruJointCalParaCfg TxChnAntSpacing
Horizontal Spacing LTE
 BTS3900, BTS3900
SuperCombCell LocalCellId Local Cell ID
LTE

BTS3900, BTS3900
SuperCombCell SfnCellId SFN Cell ID
LTE

BTS3900, BTS3900
ULZeroBufferZone LocalCellId Local cell ID
LTE

ULSharedFreqStart UL Shared BTS3900, BTS3900

ULZeroBufferZone
RB Spectrum Start RB LTE

ULSharedFreqEnd UL Shared BTS3900, BTS3900

ULZeroBufferZone
RB Spectrum End RB LTE

UL Zero Buffer
ULZeroBufZonePR BTS3900, BTS3900
ULZeroBufferZone Zone Uplink PRB
BThd LTE
Threshold

UL Zero Buffer
ULZeroBufZonePR BTS3900, BTS3900
ULZeroBufferZone Zone Uplink PRB
BOffset LTE
Offset

UL Zero Buffer
ULZeroBufZoneRsr BTS3900, BTS3900
ULZeroBufferZone Zone Downlink
pThd LTE
RSRP Threshold

UL Zero Buffer
ULZeroBufZoneRsr BTS3900, BTS3900
ULZeroBufferZone Zone Downlink
pOffset LTE
RSRP Offset
 UL Zero Buffer
ULZeroBufZoneB1 BTS3900, BTS3900
ULZeroBufferZone Zone B1 Remove
RmvOffset LTE
Offset

ULZeroBufZoneUtr UTRAN RSCP BTS3900, BTS3900

ULZeroBufferZone
anRscpThd Report Threshold LTE

UL Zero Buffer
ULZeroBufZoInterR BTS3900, BTS3900
ULZeroBufferZone Zone Inter Rat B1
atB1Timer LTE
Timer

BTS3900, BTS3900
UpPTSInterfCfg LocalCellId Local cell ID
LTE

BTS3900, BTS3900
UpPTSInterfCfg TestPeriod Adjust Period
LTE

BTS3900, BTS3900
UpPTSInterfCfg TestThreshold Test Threshold
LTE
 BTS3900, BTS3900
UpPTSInterfCfg TestHysteresis Test Hysteresis
LTE

BTS3900, BTS3900
UserVpfmPara LocalCellId Local cell ID
LTE

Downlink User
BTS3900, BTS3900
UserVpfmPara DlUserThruputThd0 Throughput
LTE
Threshold 0

Downlink User
BTS3900, BTS3900
UserVpfmPara DlUserThruputThd1 Throughput
LTE
Threshold 1

Downlink User
BTS3900, BTS3900
UserVpfmPara DlUserThruputThd2 Throughput
LTE
Threshold 2

Downlink User
BTS3900, BTS3900
UserVpfmPara DlUserThruputThd3 Throughput
LTE
Threshold 3

Downlink User
BTS3900, BTS3900
UserVpfmPara DlUserThruputThd4 Throughput
LTE
Threshold 4

Uplink Access
UlAccessDelayGoo BTS3900, BTS3900
UserVpfmPara Delay Good
dThd LTE
Threshold

Uplink Access
UlAccessDelayBad BTS3900, BTS3900
UserVpfmPara Delay Bad
Thd LTE
Threshold

Downlink Access
DlAccessDelayGoo BTS3900, BTS3900
UserVpfmPara Delay Good
dThd LTE
Threshold
 Downlink Access
DlAccessDelayBad BTS3900, BTS3900
UserVpfmPara Delay Bad
Thd LTE
Threshold

BTS3900, BTS3900
CellAlgoSwitch LocalCellId Local cell ID
LTE

RACH algorithm BTS3900, BTS3900

CellAlgoSwitch RachAlgoSwitch
switch LTE
 SoundingRS BTS3900, BTS3900
CellAlgoSwitch SrsAlgoSwitch
algorithm switch LTE
 PUCCH algorithm BTS3900, BTS3900
CellAlgoSwitch PucchAlgoSwitch
switch LTE

AQM algorithm BTS3900, BTS3900

CellAlgoSwitch AqmAlgoSwitch
switch LTE
 CQI Adjust BTS3900, BTS3900
CellAlgoSwitch CqiAdjAlgoSwitch
Algorithm Switch LTE

Dynamic adjust
BTS3900, BTS3900
CellAlgoSwitch DynAdjVoltSwitch voltage algorithm
LTE
switch
 RAC algorithm BTS3900, BTS3900
CellAlgoSwitch RacAlgoSwitch
switch LTE
 Load balancing BTS3900, BTS3900
CellAlgoSwitch MlbAlgoSwitch
algorithm switch LTE
 Downlink power
BTS3900, BTS3900
CellAlgoSwitch DlPcAlgoSwitch control algorithm
LTE
switch
 Uplink power
BTS3900, BTS3900
CellAlgoSwitch UlPcAlgoSwitch control algorithm
LTE
switch

BTS3900, BTS3900
CellAlgoSwitch BfAlgoSwitch BF algorithm switch
LTE
 BTS3900, BTS3900
CellAlgoSwitch DlSchSwitch DL schedule switch
LTE
 Uplink schedule BTS3900, BTS3900
CellAlgoSwitch UlSchSwitch
switch LTE

RanShareModeSwit RAN Sharing Mode BTS3900, BTS3900

CellAlgoSwitch
ch Switch LTE
 Based on
FreqPriorityHoSwitc BTS3900, BTS3900
CellAlgoSwitch Frequency Priority
h LTE
HO Switch
 MUBF Algorithm BTS3900, BTS3900
CellAlgoSwitch MuBfAlgoSwitch
Switch LTE

Distance-based BTS3900, BTS3900

CellAlgoSwitch DistBasedHoSwitch
Handover Switch LTE
 AcBar algorithms BTS3900, BTS3900
CellAlgoSwitch AcBarAlgoSwitch
switch LTE

MRC/IRC BTS3900, BTS3900

CellAlgoSwitch MrcIrcAdptSwitch
adaptation switch LTE

SFN UL Scheduling BTS3900, BTS3900

CellAlgoSwitch SfnUlSchSwitch
Switch LTE

SFN DL Scheduling BTS3900, BTS3900

CellAlgoSwitch SfnDlSchSwitch
Switch LTE
 BTS3900, BTS3900
CellAlgoSwitch IrcSwitch IRC Switch
LTE

Dynamic DRX BTS3900, BTS3900

CellAlgoSwitch DynDrxSwitch
switch LTE

High Mobility
HighMobiTrigIdleMo BTS3900, BTS3900
CellAlgoSwitch Triggered Idle Mode
deSwitch LTE
Switch
 Interference BTS3900, BTS3900
CellAlgoSwitch AvoidInterfSwitch
avoidance switch LTE

GL power share BTS3900, BTS3900

CellAlgoSwitch GLPwrShare
switch LTE
 BTS3900, BTS3900
CellAlgoSwitch EicicSwitch Eicic Switch
LTE

PUCCH resource
PUSCHMaxRBPUC BTS3900, BTS3900
CellAlgoSwitch switch based on UL
CHAdjSwitch LTE
peak rate
 Downlink CoMP BTS3900, BTS3900
CellAlgoSwitch DlCompSwitch
algorithms switch LTE

PSIC algorithm BTS3900, BTS3900

CellAlgoSwitch PsicSwitch
switch LTE
 Load Balancing BTS3900, BTS3900
CellAlgoSwitch MlbHoMode
Handover Policy LTE
 BTS3900, BTS3900
CellAlgoSwitch UplinkCompSwitch UplinkCompSwitch
LTE

AntCalibrationAlgo Antenna calibration BTS3900, BTS3900

CellAlgoSwitch
Switch algorithm switch LTE

DynSpectrumShare Dynamic Spectrum BTS3900, BTS3900

CellAlgoSwitch
Switch Share Switch LTE
 SfnLoadBasedAdpt SFN Load-based BTS3900, BTS3900
CellAlgoSwitch
Switch Adaptive Switch LTE
 PUSCH IRC BTS3900, BTS3900
CellAlgoSwitch PuschIrcAlgoSwitch
algorithm switch LTE

ReselecPriAdaptSw Reselection Priority BTS3900, BTS3900

CellAlgoSwitch
itch Adaptive Switch LTE
 SFN Algorithm BTS3900, BTS3900
CellAlgoSwitch SfnAlgoSwitch
Switch LTE
 Prach Interference BTS3900, BTS3900
CellAlgoSwitch PrachIntrfRejSwitch
Rejection Switch LTE

Enhanced MIMO BTS3900, BTS3900

CellAlgoSwitch EnhMIMOSwitch
Switch LTE
 Interference
BTS3900, BTS3900
CellAlgoSwitch InterfRandSwitch Randomize
LTE
Algorithm Switch

BTS3900, BTS3900
CellAlgoSwitch RepeaterSwitch Repeater Switch
LTE
 Multi Frequency
MultiFreqPriControl BTS3900, BTS3900
CellAlgoSwitch Priority Control
Switch LTE
Switch
 Harq Algorithm BTS3900, BTS3900
CellAlgoSwitch HarqAlgoSwitch
Switch LTE
 Coverage Based
CovBasedInterFreq BTS3900, BTS3900
CellAlgoSwitch Inter Frequency
HoMode LTE
Handover Mode

LteUtcBroadcastSw Lte Utc Broadcast BTS3900, BTS3900

CellAlgoSwitch
itch Switch LTE
 CellSchStrategySwi Cell Schedule BTS3900, BTS3900
CellAlgoSwitch
tch Strategy Switch LTE

SSRD Algorithm BTS3900, BTS3900

CellAlgoSwitch SsrdAlgoSwitch
Switch LTE
 SfnUplinkCompSwit SFN Uplink Comp BTS3900, BTS3900
CellAlgoSwitch
ch Switch LTE

Low Speed User

LowSpeedInterFreq BTS3900, BTS3900
CellAlgoSwitch Inter-frequency
HoSwitch LTE
Handover Switch
 BTS3900, BTS3900
CellAlgoSwitch RelaySwitch Relay Switch
LTE

Inter-frequency
InterFreqDirectHoS BTS3900, BTS3900
CellAlgoSwitch Directional
witch LTE
Handover Switch
 Power Derating BTS3900, BTS3900
CellAlgoSwitch PwrDeratSwitch
Switch LTE

DetectionAlgoSwitc DetectionAlgoSwitc BTS3900, BTS3900

CellAlgoSwitch
h h LTE
 Pucch IRC BTS3900, BTS3900
CellAlgoSwitch PucchIRCEnhance
Enhance LTE
 AcBarAlgoforDynS Ac Bar Algorithm BTS3900, BTS3900
CellAlgoSwitch
witch Switch for Dynamic LTE
 BTS3900, BTS3900
CellAlgoSwitch CreSwitch CRE Switch
LTE

Backoff Algorithm BTS3900, BTS3900

CellAlgoSwitch BackoffAlgoSwitch
Switch LTE
 Handover Allowed BTS3900, BTS3900
CellAlgoSwitch HoAllowedSwitch
Switch LTE
 Neighbor Cell
BTS3900, BTS3900
CellAlgoSwitch NCellClassMgtSw Classification Mgt
LTE
Switch
 Specified PCI
SpePCIBasedPolic BTS3900, BTS3900
CellAlgoSwitch Based Policy
ySw LTE
Switch

Cell Passive Inter-

CellPIMInterMitigS Modulation BTS3900, BTS3900
CellAlgoSwitch
witch Interference LTE
Mitigation Switch
 PrachJointReceptio Prach Joint BTS3900, BTS3900
CellAlgoSwitch
nSwitch Reception Switch LTE

BTS3900, BTS3900
CellAlgoSwitch FeicicSwitch FeICIC Switch
LTE
 Coordinated AMC BTS3900, BTS3900
CellAlgoSwitch CamcSwitch
Switch LTE

BTS3900, BTS3900
CellAlgoSwitch RruUeMapSwitch RU Ue Map Switch
LTE
 High Speed
HighSpeedSchOpt BTS3900, BTS3900
CellAlgoSwitch Schedule
Switch LTE
Optimized Switch
 Service
BTS3900, BTS3900
CellAlgoSwitch ServiceDiffSwitch Differentiated
LTE
Switch

BTS3900, BTS3900
CellAlgoSwitch LtePttQoSSwitch PTT QoS Switch
LTE
 SRS and PUCCH
SrsPucchEnhanced BTS3900, BTS3900
CellAlgoSwitch Allocation
Switch LTE
Enhanced Switch
 UEInactiveTimerQC UE Inactive Timer BTS3900, BTS3900
CellAlgoSwitch
I1Switch for QCI1 Switch LTE
 UL JR Antenna
UlJRAntNumComb BTS3900, BTS3900
CellAlgoSwitch Number Combined
Sw LTE
Switch

VamPhaseShiftAlgo VAM Phase Shift BTS3900, BTS3900

CellAlgoSwitch
Switch Algorithm Switch LTE
 BTS3900, BTS3900
CellAlgoSwitch TrafficMlbSwitch Traffic MLB Switch
LTE

Measurement
MeasOptAlgoSwitc BTS3900, BTS3900
CellAlgoSwitch Optimization
h LTE
Algorithm Switch

BTS3900, BTS3900
CellDlIcic LocalCellId Local cell ID
LTE
 Downlink band BTS3900, BTS3900
CellDlIcic BandMode
division scheme LTE

DlIcicUserAttrGfact User Attribution BTS3900, BTS3900

CellDlIcic
orThd Gfactor Threshold LTE
 DlIcicNoiseUserRsr Noise User RSRP BTS3900, BTS3900
CellDlIcic
pThd Threshold LTE

BTS3900, BTS3900
CellDlpcPdcch LocalCellId Local cell ID
LTE
 DCI power offset for BTS3900, BTS3900
CellDlpcPdcch DediDciPwrOffset
dedicated control LTE

BTS3900, BTS3900
CellDlpcPdsch LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
CellDlpcPdsch CcuPa Center UE PA
LTE
 BTS3900, BTS3900
CellDlpcPdsch CeuPa Edge UE PA
LTE

BTS3900, BTS3900
CellDlpcPhich LocalCellId Local cell ID
LTE
 Phich Pc Off Power BTS3900, BTS3900
CellDlpcPhich PwrOffset
Offset LTE

BTS3900, BTS3900
CellDlschAlgo LocalCellId Local cell ID
LTE
 Downlink BTS3900, BTS3900
CellDlschAlgo DlschStrategy
scheduling Strategy LTE

FreeUserDlRbUsed Free Users BTS3900, BTS3900

CellDlschAlgo
Ratio Downlink RB Ratio LTE
 maximum number BTS3900, BTS3900
CellDlschAlgo MaxMimoRankPara
of MIMO layers LTE

Downlink CA BTS3900, BTS3900

CellDlschAlgo CaSchStrategy
Schedule Strategy LTE
 Reserved resource
NonGbrResourceR BTS3900, BTS3900
CellDlschAlgo ratio for non-GBR
atio LTE
services

DlEpfCapacityFacto Downlink EPF BTS3900, BTS3900

CellDlschAlgo
r capacity factor LTE
 RB Priority MCS
RBPriMcsSelectRat BTS3900, BTS3900
CellDlschAlgo Select Ratio
ioThd LTE
Threshold

CellEdgeUserRbAll Cell Edge User RB BTS3900, BTS3900

CellDlschAlgo
ocMode Allocation Mode LTE

Downlink ICIC BTS3900, BTS3900

CellDlschAlgo DlIcicSchMode
Schedule Mode LTE
 RBG Resource BTS3900, BTS3900
CellDlschAlgo RbgAllocStrategy
Allocation Strategy LTE

Dowlink HARQ
Maximum BTS3900, BTS3900
CellDlschAlgo DlHarqMaxTxNum
Transmission LTE
Number

NonGbrSchDelayW NonGBR Traffic BTS3900, BTS3900

CellDlschAlgo
eight Delay Weight LTE
 Handover UE Static
BTS3900, BTS3900
CellDlschAlgo HoStaticMcsTimer MCS Scheduling
LTE
Timer

DlRankOptimizeSwi Downlink Rank BTS3900, BTS3900

CellDlschAlgo
tch Optimize Switch LTE

Ca Scc Doppler BTS3900, BTS3900

CellDlschAlgo CaSccDopMeas
Measurement LTE
 Downlink Semi-
BTS3900, BTS3900
CellDlschAlgo DlSpsInterval persistent
LTE
Scheduling Interval
 RBPriMcsSelectStr RB Priority MCS BTS3900, BTS3900
CellDlschAlgo
ategy Select Strategy LTE
 DlRankDetectSwitc Downlink Rank BTS3900, BTS3900
CellDlschAlgo
h Detect Switch LTE

MBSFN Subframe BTS3900, BTS3900

CellDlschAlgo MbsfnSfCfg
Configuration LTE
 TDD Special
TddSpecSubfSchS BTS3900, BTS3900
CellDlschAlgo Subframe
witch LTE
Scheduling Switch

Data Threshold In
DataThdInPdcchPd BTS3900, BTS3900
CellDlschAlgo Pdcch And Pdsch
schBal LTE
Balance
 Ue Num Threshold
UeNumThdInPdcch BTS3900, BTS3900
CellDlschAlgo In Pdcch And
PdschBal LTE
Pdsch Balance

eNodeB
BTS3900, BTS3900
CellDlschAlgo EnbInterfRandMod Interference
LTE
Randomize Modular
 TxD DCI1A BTS3900, BTS3900
CellDlschAlgo TxdDci1aSwitch
Scheduling Switch LTE

Downlink Schedule
BTS3900, BTS3900
CellDlschAlgo DlSchAbnUeThd Abnormal Ue
LTE
Threshold
 Code Rate for
Random Access BTS3900, BTS3900
CellDlschAlgo RarAndPagingCR
Response and LTE
Paging Message

CQI Adjustment BTS3900, BTS3900

CellDlschAlgo CqiAdjInitialStep
Initial Step LTE
 CSI-RS Subfame
CsiRsSfSchStrSwit BTS3900, BTS3900
CellDlschAlgo Scheduling
ch LTE
Strategy Switch

SFN Downlink Load BTS3900, BTS3900

CellDlschAlgo SfnDlLoadPeriod
Period LTE
 FreqSelJudgePerio Frequency Select BTS3900, BTS3900
CellDlschAlgo
d Judge Period LTE

Downlink Enhanced
DlEnhancedVoipSc BTS3900, BTS3900
CellDlschAlgo Voip Schedule
hSw LTE
Switch
 FD UE Enhanced
FDUEEnhAperCQI BTS3900, BTS3900
CellDlschAlgo Aperiodic CQI
TrigPeriod LTE
Trigger Period

SFN Downlink High BTS3900, BTS3900

CellDlschAlgo SfnDlHighLoadThd
Load Threshold LTE

SFN Downlink Low BTS3900, BTS3900

CellDlschAlgo SfnDlLowLoadThd
Load Threshold LTE
 Downlink High Load
DlHighLoadSdmaT BTS3900, BTS3900
CellDlschAlgo SDMA Threshold
hdOffset LTE
Offset

Listen Before Talk BTS3900, BTS3900

CellDlschAlgo LbtSwitch
Switch LTE

Noise Interference BTS3900, BTS3900

CellDlschAlgo LbtNiHighThreshold
High Threshold LTE

Noise Interference BTS3900, BTS3900

CellDlschAlgo LbtNiLowThreshold
Low Threshold LTE

Listen Before Talk BTS3900, BTS3900

CellDlschAlgo LbtDetectTime
Detect Time LTE

Listen Before Talk BTS3900, BTS3900

CellDlschAlgo LbtTransmitStatus
Transmit Status LTE

Listen Before Talk

BTS3900, BTS3900
CellDlschAlgo LbtNiPower Noise Interfere
LTE
Power
 Enhanced Aperiodic
EnAperiodicCqiTrig BTS3900, BTS3900
CellDlschAlgo CQI Trigger
Strategy LTE
Strategy

BTS3900, BTS3900
CellMLB LocalCellId Local cell ID
LTE
 Inter-Frequency
Mobility Load BTS3900, BTS3900
CellMLB InterFreqMlbThd
Balancing LTE
Threshold
 Inter-RAT Mobility
BTS3900, BTS3900
CellMLB InterRatMlbThd Load Balancing
LTE
Threshold

BTS3900, BTS3900
CellMLB LoadOffset Load Offset
LTE
 Load Difference BTS3900, BTS3900
CellMLB LoadDiffThd
Threshold LTE

Inter-RAT Mobility
InterRatMlbUeNum BTS3900, BTS3900
CellMLB Load Balancing UE
Thd LTE
Number Threshold
 UTRAN Idle Mode
Mobility Load BTS3900, BTS3900
CellMLB InitValidPeriod
Balancing Initial LTE
Valid Period

Load Transfer BTS3900, BTS3900

CellMLB LoadTransferFactor
Factor LTE
 Mobility Load
BTS3900, BTS3900
CellMLB MlbTriggerMode Balancing Trigger
LTE
Mode

Inter-frequency
InterFreqMlbUeNu Mobility Load BTS3900, BTS3900
CellMLB
mThd Balancing UE LTE
Number Threshold
 Mobility Load
BTS3900, BTS3900
CellMLB MlbUeNumOffset Balancing UE
LTE
Number Offset

Mobility Load
BTS3900, BTS3900
CellMLB MlbMaxUeNum Balancing Max UE
LTE
Number
 Mobility Load
Balancing UE BTS3900, BTS3900
CellMLB MlbUeSelectPrbThd
Selection PRB LTE
Usage Threshold

Downlink Data- BTS3900, BTS3900

CellMLB DlDataMlbMode
transfer MLB mode LTE
 Inter-Frequency
InterFreqMLBRanS BTS3900, BTS3900
CellMLB MLB RAN Sharing
hareMode LTE
Mode

Ue Number
BTS3900, BTS3900
CellMLB UeNumDiffThd Difference
LTE
Threshold
 BTS3900, BTS3900
CellMLB HotSpotUeMode Hot Spot UE Mode
LTE

Inter-Frequency
InterFreqIdleMlbMo BTS3900, BTS3900
CellMLB Idle Load Balancing
de LTE
Mode
 MLB Minimum UE BTS3900, BTS3900
CellMLB MlbMinUeNumThd
Number Threshold LTE
 MlbMinUeNumOffs MLB Minimum UE BTS3900, BTS3900
CellMLB
et Number Offset LTE
 InterFreqUeTrsfTyp InterFreq MLB BTS3900, BTS3900
CellMLB
e Transfer Type LTE

Inter-Freq Idle MLB

InterFreqIdleMlbUe BTS3900, BTS3900
CellMLB UE Number
NumThd LTE
Threshold
 Inter-RAT Idle MLB
InterRatIdleMlbUeN BTS3900, BTS3900
CellMLB UE Number
umThd LTE
Threshold

Inter-frequency
InterFreqLoadEvalP BTS3900, BTS3900
CellMLB Load Evaluate
rd LTE
Period
 InterRatLoadEvalPr Inter-Rat Load BTS3900, BTS3900
CellMLB
d Evaluate Period LTE
 Load Balancing
BTS3900, BTS3900
CellMLB FreqSelectStrategy Frequency Select
LTE
Strategy
 Load Balancing
LoadBalanceNCell BTS3900, BTS3900
CellMLB Neighbor Cell
Scope LTE
Scope
 InterRatMlbUeNum Inter-RAT Mlb UE BTS3900, BTS3900
CellMLB
Offset Number Offset LTE

IdleUeSelFreqScop Idle UE Select BTS3900, BTS3900

CellMLB
e Frequency Scope LTE
 InterRatMlbUeSelSt InterRAT MLB UE BTS3900, BTS3900
CellMLB
rategy Select Strategy LTE

InterRAT MLB UE
InterRatMlbUeSelPr BTS3900, BTS3900
CellMLB Select PRB
bThd LTE
Threshold

PrbLoadCalcMetho Prb Load BTS3900, BTS3900

CellMLB
d Calculation Method LTE
 MlbUeSelectPunish MLB UE Selection BTS3900, BTS3900
CellMLB
Timer Punish Timer LTE
 MlbHoCellSelectStr Mlb Ho Cell select BTS3900, BTS3900
CellMLB
ategy Strategy LTE

InterRatMlbTrigger InterRAT MLB BTS3900, BTS3900

CellMLB
Mode Trigger Mode LTE
 InterRAT MLB UE
InterRatMlbUeNum BTS3900, BTS3900
CellMLB Number Mode
ModeThd LTE
Threshold

Number of Periods
PunishJudgePrdNu BTS3900, BTS3900
CellMLB for Punishment
m LTE
Judgement

Number of Periods
BTS3900, BTS3900
CellMLB FreqPunishPrdNum for Punishment on
LTE
Frequency
 Number of Periods
BTS3900, BTS3900
CellMLB CellPunishPrdNum for Punishment on
LTE
Cell

BTS3900, BTS3900
CellMLB MultiRruMode Multiple RRU Mode
LTE
 InterFreqOffloadOff Inter-Freq Offload BTS3900, BTS3900
CellMLB
set Offset LTE
 Inter-Freq UE
InterFrqUeNumOffl BTS3900, BTS3900
CellMLB Number Offload
oadOffset LTE
Offset

CellCapacityScaleF Cell Capacity Scale BTS3900, BTS3900

CellMLB
actor Factor LTE
 MLB Trigger Judge BTS3900, BTS3900
CellMLB MlbTrigJudgePeriod
Period LTE

BTS3900, BTS3900
CellUSParaCfg LocalCellId Local cell ID
LTE
 Us Guarantee BTS3900, BTS3900
CellUSParaCfg UsAlgoSwitch
Algorithm Switch LTE

US VoIP Minimal
UsVoIPPreAllocMin BTS3900, BTS3900
CellUSParaCfg Period of
Period LTE
Preallocationn

US Data Minimal
UsDataPreAllocMin BTS3900, BTS3900
CellUSParaCfg Period of
Period LTE
Preallocationn
 US VoIP Packet
UsVoIPPreAllocSiz BTS3900, BTS3900
CellUSParaCfg Size of
e LTE
Preallocation

US Data Packet
UsDataPreAllocSiz BTS3900, BTS3900
CellUSParaCfg Size of
e LTE
Preallocation

US VoIP Smart
UsVoIPSmartPreall BTS3900, BTS3900
CellUSParaCfg Preallocation
ocDura LTE
Duration
 US Data Smart
UsDataSmartPreall BTS3900, BTS3900
CellUSParaCfg Preallocation
ocDura LTE
Duration

UlUsVoIPIblerTarge US Ul VoIP Ibler BTS3900, BTS3900

CellUSParaCfg
t Target LTE

NS Number Thd
NsNumThdForUsH BTS3900, BTS3900
CellUSParaCfg Based on US
o LTE
Handover
 UsPucchSinrTarget US PUCCH SINR BTS3900, BTS3900
CellUSParaCfg
Offset Target Offset LTE

US PUCCH RSRP
UsPucchRsrpHighT BTS3900, BTS3900
CellUSParaCfg High Threshold
hdOffset LTE
Offset

UsDataRatFreqPriG US Data Rat Freq BTS3900, BTS3900

CellUSParaCfg
roupId Priority Group ID LTE

UsGuaranteeDurTi US Guarantee BTS3900, BTS3900

CellUSParaCfg
mer Duration Timer LTE
 US Gap
UsGapMeasuremen BTS3900, BTS3900
CellUSParaCfg Measurement
tPeriod LTE
Period

US A2 RSRP BTS3900, BTS3900

CellUSParaCfg UsHoA2ThdRsrp
Threshold LTE
 US A2 RSRQ BTS3900, BTS3900
CellUSParaCfg UsHoA2ThdRsrq
Threshold LTE

UsVoIPRatFreqPriG US VoIP Rat Freq BTS3900, BTS3900

CellUSParaCfg
roupId Priority Group ID LTE

NsRatFreqPriGroup NS Rat Freq Priority BTS3900, BTS3900

CellUSParaCfg
Id Group ID LTE

Unlimited Service BTS3900, BTS3900

CellUSParaCfg UsPaPcOff
PA LTE
 US PUSCH SINR
UsPuschSinrHighT BTS3900, BTS3900
CellUSParaCfg High Threshold
hdOffset LTE
Offset

NS User RB BTS3900, BTS3900

CellUSParaCfg NsRbRestrictRatio
Restrict Ratio LTE

US User Detect BTS3900, BTS3900

CellUSParaCfg UsDetectTimer
Timer LTE
 Unlimited Service BTS3900, BTS3900
CellUSParaCfg UsDlMinGbr
Downlink MinGBR LTE
 Unlimited Service BTS3900, BTS3900
CellUSParaCfg UsUlMinGbr
Uplink MinGBR LTE

US Neighbor BTS3900, BTS3900

CellUSParaCfg UsNbInterfCtrl
Interference Control LTE
 BTS3900, BTS3900
CellPdcchAlgo LocalCellId Local cell ID
LTE

SignalCongregateL BTS3900, BTS3900

CellPdcchAlgo ComSigCongregLv
evel LTE

Cce Ratio Adjust BTS3900, BTS3900

CellPdcchAlgo CceRatioAdjSwitch
Switch LTE
 SFN Pdcch DCS BTS3900, BTS3900
CellPdcchAlgo SfnPdcchDcsThd
Threshold LTE
 PDCCH Initial BTS3900, BTS3900
CellPdcchAlgo InitPdcchSymNum
Symbol Number LTE

PDCCH Virtual BTS3900, BTS3900

CellPdcchAlgo VirtualLoadPro
Loading Proportion LTE
 PDCCH Symbol
PdcchSymNumSwit BTS3900, BTS3900
CellPdcchAlgo Number Adjust
ch LTE
Switch
 BTS3900, BTS3900
CellPdcchAlgo CceUseRatio CCE use ratio
LTE

PDCCH
PdcchAggLvlCLAdj BTS3900, BTS3900
CellPdcchAlgo Aggregation Level
ustSwitch LTE
CL Switch
 DPDVirtualLoadSwi DPD Virtual Load BTS3900, BTS3900
CellPdcchAlgo
tch Switch LTE

DPDVirtualLoadTyp DPD Virtual Load BTS3900, BTS3900

CellPdcchAlgo
e Type LTE
 Aggregation Level
AggLvlSelStrageFo BTS3900, BTS3900
CellPdcchAlgo Strategy for Dual
rDualCW LTE
Codewords
 PdcchCapacityImpr PDCCH Capacity BTS3900, BTS3900
CellPdcchAlgo
oveSwitch Improve Switch LTE

PdcchMaxCodeRat PDCCH Max Code BTS3900, BTS3900

CellPdcchAlgo
e Rate LTE
 Uplink and
ULDLPdcchSymNu Downlink PDCCH BTS3900, BTS3900
CellPdcchAlgo
m Symbols LTE
Configuration
 The Strategy Of
PDCCHAggLvlAdap PDCCH BTS3900, BTS3900
CellPdcchAlgo
tStrage Aggregation Level LTE
Adaptation
 Hysteresis for CFI
HysForCfiBasedPre BTS3900, BTS3900
CellPdcchAlgo increase based on
Sch LTE
PreSch
 SFN PDCCH SDMA BTS3900, BTS3900
CellPdcchAlgo SfnPdcchSdmaThd
Threshold LTE
 UlPdcchAllocImprov UL PDCCH Alloc BTS3900, BTS3900
CellPdcchAlgo
eSwitch Improve Switch LTE

CCE Max Initial BTS3900, BTS3900

CellPdcchAlgo CceMaxInitialRatio
Ratio LTE
 PdcchPowerEnhan PDCCH Power BTS3900, BTS3900
CellPdcchAlgo
cedSwitch Enhanced Switch LTE

PDCCH BLER BTS3900, BTS3900

CellPdcchAlgo PdcchBlerTarget
Target LTE
 HL Net Access
HLNetAccSigAggLv Signal Aggregation BTS3900, BTS3900
CellPdcchAlgo
lSelEnhSw Lvl Select Enhance LTE
Switch

BTS3900, BTS3900
CellPucchAlgo LocalCellId Local cell ID
LTE
 SRI Low Load BTS3900, BTS3900
CellPucchAlgo SriLowLoadThd
Threshold LTE
 SRI
BTS3900, BTS3900
CellPucchAlgo SriReCfgInd Reconfiguration
LTE
Indicator
 SRI Algorithm BTS3900, BTS3900
CellPucchAlgo SriAlgoSwitch
Switch LTE

CellCounterParaGr BTS3900, BTS3900

LocalCellId Local cell ID
oup LTE

Cell User Number

CellCounterParaGr CellUserNumPdfTh BTS3900, BTS3900
PDF Counter
oup d LTE
Threshold
CellCounterParaGr Uplink Ibler BTS3900, BTS3900
UlIblerOptSwitch
oup Optimization Switch LTE

CellCounterParaGr CellCounterAlgoSwi Cell Counter BTS3900, BTS3900

oup tch Algorithm Switch LTE
 Edge User
CellCounterParaGr BTS3900, BTS3900
EdgeUserA3Offset Distinguish A3
oup LTE
Offset

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd0
oup Counter Threshold LTE
0

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd1
oup Counter Threshold LTE
1

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd2
oup Counter Threshold LTE
2

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd3
oup Counter Threshold LTE
3
 Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd4
oup Counter Threshold LTE
4

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd5
oup Counter Threshold LTE
5

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd6
oup Counter Threshold LTE
6

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd7
oup Counter Threshold LTE
7

Downlink
CellCounterParaGr Throughput PDF BTS3900, BTS3900
DlThrpPdfThd8
oup Counter Threshold LTE
8

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd0 PDF Counter
oup LTE
Threshold 0

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd1 PDF Counter
oup LTE
Threshold 1
 Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd2 PDF Counter
oup LTE
Threshold 2

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd3 PDF Counter
oup LTE
Threshold 3

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd4 PDF Counter
oup LTE
Threshold 4

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd5 PDF Counter
oup LTE
Threshold 5

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd6 PDF Counter
oup LTE
Threshold 6

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd7 PDF Counter
oup LTE
Threshold 7

Uplink Throughput
CellCounterParaGr BTS3900, BTS3900
UlThrpPdfThd8 PDF Counter
oup LTE
Threshold 8

TddCellFrameOffse BTS3900, BTS3900

LocalCellId Local cell ID
t LTE
TddCellFrameOffse BTS3900, BTS3900
FrameOffsetMode Frame Offset Mode
t LTE

TddCellFrameOffse BTS3900, BTS3900

CellFrameOffset Cell Frame Offset
t LTE

CellNoAccessAlmP BTS3900, BTS3900

LocalCellId Local cell ID
ara LTE

CellNoAccessAlmP NoAccessStartDete No access detect BTS3900, BTS3900

ara ctTime start time LTE

CellNoAccessAlmP NoAccessStopDete No access detect BTS3900, BTS3900

ara ctTime stop time LTE
CellNoAccessAlmP NoAccessDetectTi No access detect BTS3900, BTS3900
ara mer timer LTE

BTS3900, BTS3900
CellUlIcic LocalCellId Local cell ID
LTE

Uplink band division BTS3900, BTS3900

CellUlIcic BandMode
scheme LTE

BTS3900, BTS3900
GeranInterfCfg LocalCellId Local cell ID
LTE
 Number of DL RBs
DlGeranIntefRbNu BTS3900, BTS3900
GeranInterfCfg interfered by
m LTE
GERAN

SINR threshold for BTS3900, BTS3900

GeranInterfCfg DlRbAvailSinrThd
available DL RBs LTE

BTS3900, BTS3900
CellRelayAlgoPara LocalCellId Local cell ID
LTE

UlRelaySubframeR Uplink Relay BTS3900, BTS3900

CellRelayAlgoPara
atio Subframe Ratio LTE
 DlRelaySubframeR Downlink Relay BTS3900, BTS3900
CellRelayAlgoPara
atio Subframe Ratio LTE

RrnPreAllocationMi Rrn Pre-Allocation BTS3900, BTS3900

CellRelayAlgoPara
nPeriod Minimum Period LTE

RrnPreAllocationSiz Rrn Pre-Allocation BTS3900, BTS3900

CellRelayAlgoPara
e Size LTE

BTS3900, BTS3900
CellSimuLoad LocalCellId Local cell ID
LTE

BTS3900, BTS3900
CellSimuLoad SimLoadCfgIndex Configure Index
LTE
 SimuLoadTransMo SimuLoad BTS3900, BTS3900
CellSimuLoad
de transmission mode LTE

BTS3900, BTS3900
CellSimuLoad SimuloadPMI Simuload PMI
LTE

SimuLoad allocated BTS3900, BTS3900

CellSimuLoad SimuLoadRbNum
RB Number LTE

Commercial service BTS3900, BTS3900

CellSimuLoad CommercRbNum
RB number LTE

SimuLoad allocated BTS3900, BTS3900

CellSimuLoad SimuLoadPower
power LTE

Commercial service BTS3900, BTS3900

CellSimuLoad CommercPower
power LTE

SimuLoad allocated BTS3900, BTS3900

CellSimuLoad SimuLoadUserNum
user Number LTE

Commercial service BTS3900, BTS3900

CellSimuLoad CommercUserNum
user number LTE

SfnEdgeRruRelatio BTS3900, BTS3900

LocalCellId Local Cell ID
n LTE

SfnEdgeRruRelatio Sector Equipment BTS3900, BTS3900

SectorEqmId
n ID LTE
SfnEdgeRruRelatio Mobile Country BTS3900, BTS3900
Mcc
n Code LTE

SfnEdgeRruRelatio Mobile Network BTS3900, BTS3900

Mnc
n Code LTE

SfnEdgeRruRelatio BTS3900, BTS3900

eNodeBId eNodeB ID
n LTE

SfnEdgeRruRelatio BTS3900, BTS3900

NeighborCellId Neighbor Cell ID
n LTE

SfnEdgeRruRelatio NeighborSectorEq Neighbor Sector BTS3900, BTS3900

n mId Equipment ID LTE

BTS3900, BTS3900
BcchCfg LocalCellId Local cell ID
LTE

Modification period BTS3900, BTS3900

BcchCfg ModifyPeriodCoeff
coefficient LTE

BTS3900, BTS3900
CellChPwrCfg LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
CellChPwrCfg PcfichPwr PCFICH power
LTE
 BTS3900, BTS3900
CellChPwrCfg PbchPwr PBCH power
LTE
 BTS3900, BTS3900
CellChPwrCfg SchPwr SCH power
LTE
 BTS3900, BTS3900
CellChPwrCfg DbchPwr DBCH power
LTE
 BTS3900, BTS3900
CellChPwrCfg PchPwr PCH power
LTE
 Rach response BTS3900, BTS3900
CellChPwrCfg RaRspPwr
power LTE
 BTS3900, BTS3900
CellChPwrCfg PrsPwr Prs power
LTE

Antenna Output BTS3900, BTS3900

CellChPwrCfg AntOutputPwr
Power LTE
 PMCH Power BTS3900, BTS3900
CellChPwrCfg PmchPwrOffset
Offset LTE

BTS3900, BTS3900
PDSCHCfg LocalCellId Local cell ID
LTE

ReferenceSignalPw Reference signal BTS3900, BTS3900

PDSCHCfg
r power LTE
 BTS3900, BTS3900
PDSCHCfg Pb PB
LTE

ReferenceSignalPw Reference Signal BTS3900, BTS3900

PDSCHCfg
rMargin Power Margin LTE

BTS3900, BTS3900
RACHCfg LocalCellId Local cell ID
LTE

BTS3900, BTS3900
RACHCfg PwrRampingStep Power ramping step
LTE
 Preamble initial
PreambInitRcvTarg BTS3900, BTS3900
RACHCfg received target
etPwr LTE
power

ZeroCorrelationZon Zero correlation BTS3900, BTS3900

RACHCfg
eConf zone config LTE

MessageSizeGroup Message size of BTS3900, BTS3900

RACHCfg
A select group A LTE
 PRACH Frequency BTS3900, BTS3900
RACHCfg PrachFreqOffset
Offset LTE

Indication of
PrachConfigIndexC BTS3900, BTS3900
RACHCfg PRACH
fgInd LTE
Configuration Index
 PRACH BTS3900, BTS3900
RACHCfg PrachConfigIndex
Configuration Index LTE

Maximum number
BTS3900, BTS3900
RACHCfg PreambleTransMax of preamble
LTE
transmission
 ContentionResoluti Timer for contention BTS3900, BTS3900
RACHCfg
onTimer resolution LTE

Maximum number
BTS3900, BTS3900
RACHCfg MaxHarqMsg3Tx of Msg3 HARQ
LTE
transmissions

RandomPreambleR Random Preamble BTS3900, BTS3900

RACHCfg
atio Ratio LTE
 Random Access
RaPreambleGrpAR BTS3900, BTS3900
RACHCfg preamble Group A
atio LTE
Ratio

BTS3900, BTS3900
SRSCfg LocalCellId Local cell ID
LTE

SRS subframe BTS3900, BTS3900

SRSCfg SrsSubframeCfg
configuration LTE
 SRS ACK/NACK
BTS3900, BTS3900
SRSCfg AnSrsSimuTrans simultaneous
LTE
transmission
 SRS Configuration BTS3900, BTS3900
SRSCfg SrsCfgInd
Indicator LTE
 TDD SRS BTS3900, BTS3900
SRSCfg TddSrsCfgMode
Configuration Mode LTE
 FDD SRS BTS3900, BTS3900
SRSCfg FddSrsCfgMode
Configuration Mode LTE

CellSrsBandwidthCf Cell srs bandwidth BTS3900, BTS3900

SRSCfg
g configuration LTE

BTS3900, BTS3900
PHICHCfg LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
PHICHCfg PhichDuration PHICH duration
LTE

BTS3900, BTS3900
PHICHCfg PhichResource PHICH resource
LTE

BTS3900, BTS3900
PCCHCfg LocalCellId Local cell ID
LTE
 Default paging BTS3900, BTS3900
PCCHCfg DefaultPagingCycle
cycle LTE

BTS3900, BTS3900
PCCHCfg Nb NB
LTE
 Paging Sent BTS3900, BTS3900
PCCHCfg PagingSentNum
Number LTE
 MaxPagingRecords Maximum Number BTS3900, BTS3900
PCCHCfg
Num of Paging Records LTE
 Paging Message BTS3900, BTS3900
PCCHCfg PagingStrategy
Sending Strategy LTE

BTS3900, BTS3900
PUSCHCfg LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
PUSCHCfg Nsb Subband number
LTE

BTS3900, BTS3900
PUSCHCfg HoppingMode Hopping mode
LTE
 BTS3900, BTS3900
PUSCHCfg HoppingOffset Hopping offset
LTE
 GroupHoppingEnab Group hopping BTS3900, BTS3900
PUSCHCfg
led enabled LTE
 GroupAssignPUSC Group assignment BTS3900, BTS3900
PUSCHCfg
H PUSCH LTE
 SeqHoppingEnable Sequence hopping BTS3900, BTS3900
PUSCHCfg
d enabled LTE

BTS3900, BTS3900
PUSCHCfg CyclicShift Cyclic shift
LTE
 BTS3900, BTS3900
PUSCHCfg Qam64Enabled Qam64 enabled
LTE

BTS3900, BTS3900
PUCCHCfg LocalCellId Local cell ID
LTE

BTS3900, BTS3900
PUCCHCfg DeltaShift Delta shift
LTE
 ACK/SRI Channel BTS3900, BTS3900
PUCCHCfg NaSriChNum
Number LTE

BTS3900, BTS3900
PUCCHCfg CqiRbNum CQI RB number
LTE
 PucchExtendedRB PUCCH Extended BTS3900, BTS3900
PUCCHCfg
Num RB Number LTE

Semi-persistent
BTS3900, BTS3900
PUCCHCfg N1PucchAn ACK and SRI Sub
LTE
Channel
 Format1ChAllocMo Format1 Channel BTS3900, BTS3900
PUCCHCfg
de Allocation Mode LTE
 SRI Period BTS3900, BTS3900
PUCCHCfg SriPeriodAdaptive
Adaptive Switch LTE

Cdma20001XrttPre BTS3900, BTS3900

LocalCellId Local cell ID
Reg LTE

Cdma20001XrttPre Mobile country BTS3900, BTS3900

Mcc
Reg code LTE

Cdma20001XrttPre Mobile network BTS3900, BTS3900

Mnc
Reg code LTE
Cdma20001XrttPre Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900
Reg Id cell ID LTE

Cdma20001XrttPre Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900

Reg torId sector ID LTE

Cdma20001XrttPre BTS3900, BTS3900

Sid System ID
Reg LTE

Cdma20001XrttPre BTS3900, BTS3900

Nid Network ID
Reg LTE

Cdma20001XrttPre BTS3900, BTS3900

MscId MSC ID
Reg LTE

Cdma20001XrttPre Band class include BTS3900, BTS3900

BandClassInclude
Reg indicator LTE
Cdma20001XrttPre BTS3900, BTS3900
BandClass Band class
Reg LTE

CSFB-registration
Cdma20001XrttPre BTS3900, BTS3900
CsfbRegCfgInd parameters
Reg LTE
configure indicator

Cdma20001XrttPre Multiple system ID BTS3900, BTS3900

MultiSidInd
Reg storage indicator LTE

Cdma20001XrttPre Multiple network ID BTS3900, BTS3900

MultiNidInd
Reg storage indicator LTE

Cdma20001XrttPre Home rgistration BTS3900, BTS3900

HomeRegInd
Reg indicator LTE

System ID roamer
Cdma20001XrttPre BTS3900, BTS3900
ForeignSidRegInd registration
Reg LTE
indicator
 Network ID roamer
Cdma20001XrttPre BTS3900, BTS3900
ForeignNidRegInd registration
Reg LTE
indicator

Parameter change
Cdma20001XrttPre BTS3900, BTS3900
ParamRegInd registration
Reg LTE
indicator

Power up
Cdma20001XrttPre BTS3900, BTS3900
PowerUpRegInd registration
Reg LTE
indicator

Cdma20001XrttPre BTS3900, BTS3900

RegPeriod Registration period
Reg LTE

Cdma20001XrttPre BTS3900, BTS3900

RegZone Registration zone
Reg LTE

Number of
Cdma20001XrttPre BTS3900, BTS3900
TotalZone registration zones
Reg LTE
to be retained
Cdma20001XrttPre BTS3900, BTS3900
ZoneTimer Zone timer length
Reg LTE

Power-down
Cdma20001XrttPre BTS3900, BTS3900
PowerDownInclude registration include
Reg LTE
indicator

AC barring
Cdma20001XrttPre BTS3900, BTS3900
AcBarCfgInd information
Reg LTE
configure indicator

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar0to9 for access overload
Reg LTE
classes 0 to 9

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar10 for access overload
Reg LTE
class 10
 Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar11 for access overload
Reg LTE
class 11

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar12 for access overload
Reg LTE
class 12

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar13 for access overload
Reg LTE
class 13

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar14 for access overload
Reg LTE
class 14

Persistence value
Cdma20001XrttPre BTS3900, BTS3900
AcBar15 for access overload
Reg LTE
class 15

Persistence
Modifier For Access
Cdma20001XrttPre BTS3900, BTS3900
AcBarMsg barring factor for
Reg LTE
message
transmissions
 Persistence
Cdma20001XrttPre modifier For Access BTS3900, BTS3900
AcBarReg
Reg barring factor for LTE
registrations

Persistence
Cdma20001XrttPre modifier For Access BTS3900, BTS3900
AcBarEmg
Reg barring factor for LTE
emergency service

Protocol revision
Cdma20001XrttPre BTS3900, BTS3900
ProtocolRevInc level include
Reg LTE
indicator

Cdma20001XrttPre Protocol revision BTS3900, BTS3900

ProtocolRev
Reg level LTE

Min protocol
Cdma20001XrttPre BTS3900, BTS3900
MinProtocolRevInc revision level
Reg LTE
include indicator

Cdma20001XrttPre Min protocol BTS3900, BTS3900

MinProtocolRev
Reg revision level LTE

Cdma20001XrttPre Authentication BTS3900, BTS3900

AuthInclude
Reg include indicator LTE
Cdma20001XrttPre Authentication BTS3900, BTS3900
Auth
Reg indicator LTE

Max number of
Cdma20001XrttPre MaxNumAltSoInclu alternative service BTS3900, BTS3900
Reg de options include LTE
indicator

Max number of
Cdma20001XrttPre BTS3900, BTS3900
MaxNumAltSo alternative srvice
Reg LTE
options

Preferred ACH MS
Cdma20001XrttPre PrefMsIdTypeInclud BTS3900, BTS3900
ID type include
Reg e LTE
indicator

Cdma20001XrttPre Preferred ACH MS BTS3900, BTS3900

PrefMsIdType
Reg ID type LTE

Mobile country
Cdma20001XrttPre BTS3900, BTS3900
MccInclude code include
Reg LTE
indicator

Cdma20001XrttPre Mobile network BTS3900, BTS3900

MncInclude
Reg code send indicator LTE

Cdma20001XrttPre ImsiTSupportedIncl IMSI_T supported BTS3900, BTS3900

Reg ude include indicator LTE
Cdma20001XrttPre IMSI_T support BTS3900, BTS3900
ImsiTSupported
Reg indicator LTE

Forward power
Cdma20001XrttPre control parameter BTS3900, BTS3900
FpcFchCfgInclude
Reg of FCH include LTE
indicator

RC3 initial setpoint

Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc3 of forward power
Reg LTE
control parameter

RC4 initial setpoint

Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc4 of forward power
Reg LTE
control parameter

RC5 initial setpoint

Cdma20001XrttPre BTS3900, BTS3900
FpcFchInitSteptRc5 of forward power
Reg LTE
control parameter

RC11 initial setpoint

Cdma20001XrttPre FpcFchInitSteptRc1 BTS3900, BTS3900
of forward power
Reg 1 LTE
control parameter
 RC12 initial setpoint
Cdma20001XrttPre FpcFchInitSteptRc1 BTS3900, BTS3900
of forward power
Reg 2 LTE
control parameter

Pilot PN sequence
Cdma20001XrttPre offset index BTS3900, BTS3900
PilotIncrInclude
Reg increment include LTE
indicator

Pilot PN sequence
Cdma20001XrttPre BTS3900, BTS3900
PilotIncr offset index
Reg LTE
increment

Cdma20001XrttPre Leap seconds BTS3900, BTS3900

LpSecInclude
Reg include indicator LTE

Cdma20001XrttPre Time zone include BTS3900, BTS3900

LtmOffInclude
Reg indicator LTE

Cdma20001XrttPre Daylight flag BTS3900, BTS3900

DayltInclude
Reg include indicator LTE

GCSNA layer2
Cdma20001XrttPre GcsnaL2AckTimerI BTS3900, BTS3900
acknowledge timer
Reg nclude LTE
include indicator

Cdma20001XrttPre GCSNA layer2 BTS3900, BTS3900

GcsnaL2AckTimer
Reg acknowledge timer LTE
 GCSNA sequence
Cdma20001XrttPre GcsnaSeqContextT BTS3900, BTS3900
context timer
Reg Include LTE
include indicator

Cdma20001XrttPre GcsnaSeqContextTi GCSNA sequence BTS3900, BTS3900

Reg mer context timer LTE

Cdma2000HrpdNC BTS3900, BTS3900

LocalCellId Local cell ID
ell LTE

Cdma2000HrpdNC BTS3900, BTS3900

SectorId104 SectorID104
ell LTE
Cdma2000HrpdNC BTS3900, BTS3900
SectorId24 SectorID24
ell LTE

Cdma2000HrpdNC BTS3900, BTS3900

BandClass Band class
ell LTE

Cdma2000HrpdNC BTS3900, BTS3900

Frequency Frequency
ell LTE

Cdma2000HrpdNC No handover BTS3900, BTS3900

NoHoFlag
ell indicator LTE

Cdma2000HrpdNC BTS3900, BTS3900

NoRmvFlag No remove indicator
ell LTE

Cdma2000HrpdNC BTS3900, BTS3900

AnrFlag ANR flag
ell LTE
Cdma2000HrpdNC BTS3900, BTS3900
LocalCellName Local cell name
ell LTE

Cdma2000HrpdNC NeighbourCellNam Neighbour cell BTS3900, BTS3900

ell e name LTE
Cdma2000HrpdNC BTS3900, BTS3900
CtrlMode Control Mode
ell LTE

Cdma2000HrpdPre BTS3900, BTS3900

LocalCellId Local cell ID
Reg LTE

Cdma2000HrpdPre Mobile country BTS3900, BTS3900

Mcc
Reg code LTE

Cdma2000HrpdPre Mobile network BTS3900, BTS3900

Mnc
Reg code LTE

SIB8 Pre-
Cdma2000HrpdPre Sib8PreRegistration BTS3900, BTS3900
registration allowed
Reg Allowed LTE
indicator

PreRegistrationInfo
Cdma2000HrpdPre McPreRegParaCfgI HRPD configure BTS3900, BTS3900
Reg nd indicator in LTE
MeasConfig
 Pre-registration
Cdma2000HrpdPre McPreRegistrationA BTS3900, BTS3900
allowed indicator in
Reg llowed LTE
MeasConfig

Cdma2000HrpdPre PreRegistrationZon Pre-registration BTS3900, BTS3900

Reg eId zone ID LTE

Secondary pre-
Cdma2000HrpdPre SecondaryPreRegZ registration zone ID BTS3900, BTS3900
Reg oneId0Ind 0 configure LTE
indicator

Secondary pre-
Cdma2000HrpdPre SecondaryPreRegZ BTS3900, BTS3900
registration zone ID
Reg oneId0 LTE
0

Secondary pre-
Cdma2000HrpdPre SecondaryPreRegZ registration zone ID BTS3900, BTS3900
Reg oneId1Ind 1 configure LTE
indicator
 Secondary pre-
Cdma2000HrpdPre SecondaryPreRegZ BTS3900, BTS3900
registration zone ID
Reg oneId1 LTE
1

Cdma2000HrpdRef BTS3900, BTS3900

LocalCellId Local cell ID
Cell LTE

Cdma2000HrpdRef Mobile country BTS3900, BTS3900

Mcc
Cell code LTE

Cdma2000HrpdRef Mobile network BTS3900, BTS3900

Mnc
Cell code LTE
Cdma2000HrpdRef BTS3900, BTS3900
SectorId104 SectorID104
Cell LTE

Cdma2000HrpdRef BTS3900, BTS3900

SectorId24 SectorID24
Cell LTE
Cdma2000HrpdRef BTS3900, BTS3900
SelectedRatio Selected ratio
Cell LTE

BTS3900, BTS3900
Cdma2000Nfreq LocalCellId Local cell ID
LTE

BTS3900, BTS3900
Cdma2000Nfreq BandClass Band class
LTE

BTS3900, BTS3900
Cdma2000Nfreq Frequency Frequency
LTE
 BTS3900, BTS3900
Cdma2000Nfreq OffsetFreq Frequency offset
LTE

SearchWindowSize Search window size BTS3900, BTS3900

Cdma2000Nfreq
CfgInd configure indicator LTE

BTS3900, BTS3900
Cdma2000Nfreq SearchWindowSize Search window size
LTE
 BTS3900, BTS3900
Cdma2000Nfreq FrequencyPri Frequency priority
LTE

BTS3900, BTS3900
Cluster ClusterId Cluster ID
LTE

BTS3900, BTS3900
ClusterCell ClusterId Cluster ID
LTE

Mobile country BTS3900, BTS3900

ClusterCell Mcc
code LTE

Mobile network BTS3900, BTS3900

ClusterCell Mnc
code LTE

BTS3900, BTS3900
ClusterCell eNodeBId eNodeB ID
LTE
 BTS3900, BTS3900
ClusterCell CellId Cell ID
LTE

BTS3900, BTS3900
ClusterCell CellClusterStatus Cell Cluster Status
LTE

CspcCellSrsMeasN Mobile country BTS3900, BTS3900

Mcc
Cell code LTE
CspcCellSrsMeasN Mobile network BTS3900, BTS3900
Mnc
Cell code LTE

CspcCellSrsMeasN BTS3900, BTS3900

eNodeBId eNodeB ID
Cell LTE
CspcCellSrsMeasN BTS3900, BTS3900
CellId Cell ID
Cell LTE

CspcCellSrsMeasN Neighbor mobile BTS3900, BTS3900

NCellMcc
Cell country code LTE
CspcCellSrsMeasN Neighbor mobile BTS3900, BTS3900
NCellMnc
Cell network code LTE

CspcCellSrsMeasN Neighbor eNodeB BTS3900, BTS3900

NCellENodeBId
Cell ID LTE

CspcCellSrsMeasN BTS3900, BTS3900

NCellId Neighbor Cell ID
Cell LTE
 BTS3900, BTS3900
CspcCluster CspcClusterId CSPC Cluster ID
LTE

BTS3900, BTS3900
CspcClusterCell CspcClusterId CSPC Cluster ID
LTE

Mobile country BTS3900, BTS3900

CspcClusterCell Mcc
code LTE

Mobile network BTS3900, BTS3900

CspcClusterCell Mnc
code LTE

BTS3900, BTS3900
CspcClusterCell eNodeBId eNodeB ID
LTE

BTS3900, BTS3900
CspcClusterCell CellId Cell ID
LTE
EutranExternalCell Mobile country BTS3900, BTS3900
Mcc
Plmn code LTE

EutranExternalCell Mobile network BTS3900, BTS3900

Mnc
Plmn code LTE

EutranExternalCell BTS3900, BTS3900

eNodeBId eNodeB ID
Plmn LTE

EutranExternalCell BTS3900, BTS3900

CellId Cell ID
Plmn LTE

EutranExternalCell Share mobile BTS3900, BTS3900

ShareMcc
Plmn country code LTE
EutranExternalCell Share mobile BTS3900, BTS3900
ShareMnc
Plmn network code LTE

GeranExternalCellP BTS3900, BTS3900

GeranCellId GERAN cell ID
lmn LTE

GeranExternalCellP BTS3900, BTS3900

Lac Location area code
lmn LTE

GeranExternalCellP Mobile country BTS3900, BTS3900

Mcc
lmn code LTE

GeranExternalCellP Mobile network BTS3900, BTS3900

Mnc
lmn code LTE
GeranExternalCellP Share mobile BTS3900, BTS3900
ShareMcc
lmn country code LTE

GeranExternalCellP Share mobile BTS3900, BTS3900

ShareMnc
lmn network code LTE

UtranExternalCellPl Mobile country BTS3900, BTS3900

Mcc
mn code LTE

UtranExternalCellPl Mobile network BTS3900, BTS3900

Mnc
mn code LTE

UtranExternalCellPl BTS3900, BTS3900

RncId RNC ID
mn LTE
UtranExternalCellPl BTS3900, BTS3900
CellId RNC cell ID
mn LTE

UtranExternalCellPl Share mobile BTS3900, BTS3900

ShareMcc
mn country code LTE

UtranExternalCellPl Share mobile BTS3900, BTS3900

ShareMnc
mn network code LTE

Cdma2000HrpdExt BTS3900, BTS3900

SectorId104 SectorID104
Cell LTE
Cdma2000HrpdExt BTS3900, BTS3900
SectorId24 SectorID24
Cell LTE

Cdma2000HrpdExt BTS3900, BTS3900

BandClass Band class
Cell LTE

Cdma2000HrpdExt BTS3900, BTS3900

Frequency Frequency
Cell LTE

Cdma2000HrpdExt Mobile country BTS3900, BTS3900

Mcc
Cell code LTE

Cdma2000HrpdExt Mobile network BTS3900, BTS3900

Mnc
Cell code LTE
Cdma2000HrpdExt BTS3900, BTS3900
PnOffset Physical cell ID
Cell LTE

Cdma2000HrpdExt BTS3900, BTS3900

CellName Cell name
Cell LTE

Cdma2000HrpdExt BTS3900, BTS3900

CtrlMode Control Mode
Cell LTE

Cdma20001XrttExt Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900

Cell Id cell ID LTE

Cdma20001XrttExt Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900

Cell torId sector ID LTE
Cdma20001XrttExt BTS3900, BTS3900
BandClass Band class
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

Frequency Frequency
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

Sid System ID
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

Nid Network ID
Cell LTE

Cdma20001XrttExt Mobile country BTS3900, BTS3900

Mcc
Cell code LTE

Cdma20001XrttExt Mobile network BTS3900, BTS3900

Mnc
Cell code LTE
Cdma20001XrttExt BTS3900, BTS3900
MscId MSC ID
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

PnOffset Physical cell ID
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

CellName Cell name
Cell LTE

Cdma20001XrttExt BTS3900, BTS3900

CtrlMode Control Mode
Cell LTE

Cdma20001XrttNC BTS3900, BTS3900

LocalCellId Local cell ID
ell LTE

Cdma20001XrttNC Cdma20001XrttCell CDMA20001XRTT BTS3900, BTS3900

ell Id cell ID LTE
Cdma20001XrttNC Cdma20001XrttSec CDMA20001XRTT BTS3900, BTS3900
ell torId sector ID LTE

Cdma20001XrttNC BTS3900, BTS3900

BandClass Band class
ell LTE

Cdma20001XrttNC BTS3900, BTS3900

Frequency Frequency
ell LTE

Cdma20001XrttNC BTS3900, BTS3900

Sid System ID
ell LTE

Cdma20001XrttNC BTS3900, BTS3900

Nid Network ID
ell LTE

Cdma20001XrttNC No handover BTS3900, BTS3900

NoHoFlag
ell indicator LTE

Cdma20001XrttNC BTS3900, BTS3900

NoRmvFlag No remove indicator
ell LTE

Cdma20001XrttNC BTS3900, BTS3900

AnrFlag ANR flag
ell LTE
Cdma20001XrttNC BTS3900, BTS3900
LocalCellName Local cell name
ell LTE

Cdma20001XrttNC NeighbourCellNam Neighbour cell BTS3900, BTS3900

ell e name LTE
Cdma20001XrttNC BTS3900, BTS3900
CtrlMode Control Mode
ell LTE

Cdma2000BandCla BTS3900, BTS3900

LocalCellId Local cell ID
ss LTE

Cdma2000BandCla BTS3900, BTS3900

BandClass Band class
ss LTE

CDMA20001XRTT
Cdma2000BandCla Cdma20001XrttCell BTS3900, BTS3900
cell reselection
ss ReselInd LTE
indicator

CDMA20001XRTT
Cdma2000BandCla Cdma20001XrttCell BTS3900, BTS3900
cell reselection
ss ReselPri LTE
priority
 CDMA20001XRTT
Cdma2000BandCla Cdma20001XrttThr BTS3900, BTS3900
high priority
ss eshXHigh LTE
threshold

CDMA20001XRTT
Cdma2000BandCla Cdma20001XrttThr BTS3900, BTS3900
lower priority
ss eshXLow LTE
threshold

CDMA2000HRPD
Cdma2000BandCla Cdma2000HrpdCell BTS3900, BTS3900
cell reselection
ss ReselInd LTE
indicator

CDMA2000HRPD
Cdma2000BandCla Cdma2000HrpdCell BTS3900, BTS3900
cell reselection
ss ReselPri LTE
priority

CDMA2000HRPD
Cdma2000BandCla Cdma2000HrpdThr BTS3900, BTS3900
high priority
ss eshXHigh LTE
threshold

CDMA2000HRPD
Cdma2000BandCla Cdma2000HrpdThr BTS3900, BTS3900
lower priority
ss eshXLow LTE
threshold
 Mobile country BTS3900, BTS3900
GeranExternalCell Mcc
code LTE

Mobile network BTS3900, BTS3900

GeranExternalCell Mnc
code LTE

BTS3900, BTS3900
GeranExternalCell GeranCellId GERAN cell ID
LTE

BTS3900, BTS3900
GeranExternalCell Lac Location area code
LTE

Routing area code BTS3900, BTS3900

GeranExternalCell RacCfgInd
configure indicator LTE

BTS3900, BTS3900
GeranExternalCell Rac Routing area code
LTE

BTS3900, BTS3900
GeranExternalCell BandIndicator Band indicator
LTE

BTS3900, BTS3900
GeranExternalCell GeranArfcn GERAN ARFCN
LTE

NetworkColourCod BTS3900, BTS3900

GeranExternalCell Network color code
e LTE
 BaseStationColour Base station color BTS3900, BTS3900
GeranExternalCell
Code code LTE

BTS3900, BTS3900
GeranExternalCell DtmInd DTM indication
LTE

BTS3900, BTS3900
GeranExternalCell CellName Cell name
LTE

CS and PS BTS3900, BTS3900

GeranExternalCell CsPsHOInd
handover indication LTE
 Ultra-Flash CSFB
BTS3900, BTS3900
GeranExternalCell UltraFlashCsfbInd Capability
LTE
Indication

Roaming Area BTS3900, BTS3900

GeranExternalCell RoamingAreaHoInd
Handover Indicator LTE

BTS3900, BTS3900
GeranExternalCell CtrlMode Control Mode
LTE
 BTS3900, BTS3900
GeranNcell LocalCellId Local cell ID
LTE

Mobile country BTS3900, BTS3900

GeranNcell Mcc
code LTE

Mobile network BTS3900, BTS3900

GeranNcell Mnc
code LTE

BTS3900, BTS3900
GeranNcell Lac Location area code
LTE

BTS3900, BTS3900
GeranNcell GeranCellId GERAN cell ID
LTE

BTS3900, BTS3900
GeranNcell NoRmvFlag No remove indicator
LTE

No handover BTS3900, BTS3900

GeranNcell NoHoFlag
indicator LTE

Blind handover BTS3900, BTS3900

GeranNcell BlindHoPriority
priority LTE
 BTS3900, BTS3900
GeranNcell AnrFlag ANR flag
LTE

BTS3900, BTS3900
GeranNcell LocalCellName Local cell name
LTE

NeighbourCellNam Neighbour cell BTS3900, BTS3900

GeranNcell
e name LTE
 BTS3900, BTS3900
GeranNcell OverlapInd Overlap Indicator
LTE

Neighbering Cell BTS3900, BTS3900

GeranNcell NCellMeasPriority
Measure Priority LTE

BTS3900, BTS3900
GeranNcell CtrlMode Control Mode
LTE

BTS3900, BTS3900
GeranNcell eNodeBId eNodeB ID
LTE

GRimBeginningTim BTS3900, BTS3900

GeranNcell Rim latest start time
e LTE

GLastRimUpdating Rim latest update BTS3900, BTS3900

GeranNcell
Time time LTE
 BTS3900, BTS3900
GeranNfreqGroup LocalCellId Local cell ID
LTE

BTS3900, BTS3900
GeranNfreqGroup BcchGroupId BCCH group ID
LTE

BTS3900, BTS3900
GeranNfreqGroup GeranVersion GERAN version
LTE

BTS3900, BTS3900
GeranNfreqGroup StartingArfcn Starting ARFCN
LTE

BTS3900, BTS3900
GeranNfreqGroup BandIndicator Band indicator
LTE

Cell reselection
CellReselPriorityCfg BTS3900, BTS3900
GeranNfreqGroup priority configure
Ind LTE
indicator

Cell reselection BTS3900, BTS3900

GeranNfreqGroup CellReselPriority
priority LTE

PMAX configure BTS3900, BTS3900

GeranNfreqGroup PmaxGeranCfgInd
indicator LTE
 BTS3900, BTS3900
GeranNfreqGroup PmaxGeran PMAX
LTE

Minimum required BTS3900, BTS3900

GeranNfreqGroup QRxLevMin
RX level LTE

High priority BTS3900, BTS3900

GeranNfreqGroup ThreshXHigh
threshold LTE

Lower priority BTS3900, BTS3900

GeranNfreqGroup ThreshXLow
threshold LTE
 BTS3900, BTS3900
GeranNfreqGroup OffsetFreq Frequency offset
LTE

NCC monitoring BTS3900, BTS3900

GeranNfreqGroup NccPermitted
permitted LTE

Frequency Priority
BTS3900, BTS3900
GeranNfreqGroup ConnFreqPriority for Connected
LTE
Mode

ContinuCoverageIn Continuous BTS3900, BTS3900

GeranNfreqGroup
dication Coverage Indication LTE
 GERAN Freq Group
GeranRanSharingIn BTS3900, BTS3900
GeranNfreqGroup RAN Sharing
d LTE
Indication

BTS3900, BTS3900
GeranNfreqGroup AnrInd ANR Indication
LTE
 ANR Frequency BTS3900, BTS3900
GeranNfreqGroup FreqPriorityForAnr
Priority LTE

GeranNfreqGroupA BTS3900, BTS3900

LocalCellId Local cell ID
rfcn LTE

GeranNfreqGroupA BTS3900, BTS3900

BcchGroupId BCCH group ID
rfcn LTE

GeranNfreqGroupA BTS3900, BTS3900

GeranArfcn GERAN ARFCN
rfcn LTE

BTS3900, BTS3900
IntraFreqBlkCell LocalCellId Local cell ID
LTE
 Start physical cell BTS3900, BTS3900
IntraFreqBlkCell PhyCellId
ID LTE

BTS3900, BTS3900
IntraFreqBlkCell CellName Cell name
LTE

Physical cell ID BTS3900, BTS3900

IntraFreqBlkCell PhyCellIdRange
range LTE

EutranIntraFreqNC BTS3900, BTS3900

LocalCellId Local cell ID
ell LTE

EutranIntraFreqNC Mobile country BTS3900, BTS3900

Mcc
ell code LTE

EutranIntraFreqNC Mobile network BTS3900, BTS3900

Mnc
ell code LTE

EutranIntraFreqNC BTS3900, BTS3900

eNodeBId eNodeB ID
ell LTE

EutranIntraFreqNC BTS3900, BTS3900

CellId Cell ID
ell LTE
EutranIntraFreqNC BTS3900, BTS3900
CellIndividualOffset Cell individual offset
ell LTE
EutranIntraFreqNC BTS3900, BTS3900
CellQoffset Cell offset
ell LTE

EutranIntraFreqNC No handover BTS3900, BTS3900

NoHoFlag
ell indicator LTE

EutranIntraFreqNC BTS3900, BTS3900

NoRmvFlag No remove indicator
ell LTE

EutranIntraFreqNC BTS3900, BTS3900

AnrFlag ANR flag
ell LTE
EutranIntraFreqNC BTS3900, BTS3900
LocalCellName Local cell name
ell LTE

EutranIntraFreqNC NeighbourCellNam Neighbour cell BTS3900, BTS3900

ell e name LTE
EutranIntraFreqNC Cell Measure BTS3900, BTS3900
CellMeasPriority
ell Priority LTE
EutranIntraFreqNC CellRangeExpansio Cell Range BTS3900, BTS3900
ell n Expansion LTE

EutranIntraFreqNC Neighbor Cell BTS3900, BTS3900

NCellClassLabel
ell Classification Label LTE

EutranIntraFreqNC BTS3900, BTS3900

CtrlMode Control Mode
ell LTE
EutranIntraFreqNC BTS3900, BTS3900
PhyCellId Physical cell ID
ell LTE

EutranIntraFreqNC BTS3900, BTS3900

DlEarfcn Downlink EARFCN
ell LTE
EutranIntraFreqNC BTS3900, BTS3900
AttachCellSwitch Attach Cell Switch
ell LTE

BTS3900, BTS3900
EutranInterNFreq LocalCellId Local cell ID
LTE

BTS3900, BTS3900
EutranInterNFreq DlEarfcn Downlink EARFCN
LTE
 Uplink EARFCN BTS3900, BTS3900
EutranInterNFreq UlEarfcnCfgInd
configure indicator LTE

BTS3900, BTS3900
EutranInterNFreq UlEarfcn Uplink EARFCN
LTE

Inter frequency cell

CellReselPriorityCfg BTS3900, BTS3900
EutranInterNFreq resel priority
Ind LTE
configure indicator

Inter frequency cell BTS3900, BTS3900

EutranInterNFreq CellReselPriority
resel priority LTE
 EUTRAN BTS3900, BTS3900
EutranInterNFreq EutranReselTime
reselection time LTE

Speed dependent
SpeedDependSPCf resel parameter BTS3900, BTS3900
EutranInterNFreq
gInd configuring LTE
indicator

Scaling factor of
TReselEutranSfMe treseleutran in BTS3900, BTS3900
EutranInterNFreq
dium medium mobility LTE
state
 Scaling factor of
TReselEutranSfHig BTS3900, BTS3900
EutranInterNFreq treseleutran in high
h LTE
mobility state

Measurement BTS3900, BTS3900

EutranInterNFreq MeasBandWidth
bandwidth LTE
 BTS3900, BTS3900
EutranInterNFreq QoffsetFreq Frequency offset
LTE

Inter frequency high BTS3900, BTS3900

EutranInterNFreq ThreshXhigh
priority threshold LTE
 Inter frequency
BTS3900, BTS3900
EutranInterNFreq ThreshXlow lower priority
LTE
threshold

Minimum required BTS3900, BTS3900

EutranInterNFreq QRxLevMin
RX level LTE

PMAX configure BTS3900, BTS3900

EutranInterNFreq PmaxCfgInd
indicator LTE

BTS3900, BTS3900
EutranInterNFreq Pmax PMAX
LTE
 Neighbor Cell BTS3900, BTS3900
EutranInterNFreq NeighCellConfig
Configuration LTE

PresenceAntennaP Presence antenna BTS3900, BTS3900

EutranInterNFreq
ort1 port1 LTE

InterFreqHoEventTy Inter-Freq HO BTS3900, BTS3900

EutranInterNFreq
pe trigger Event Type LTE

Inter frequency high

BTS3900, BTS3900
EutranInterNFreq ThreshXhighQ priority RSRQ
LTE
threshold
 Inter frequency low
BTS3900, BTS3900
EutranInterNFreq ThreshXlowQ priority RSRQ
LTE
threshold

Minimum RX signal
BTS3900, BTS3900
EutranInterNFreq QqualMinCfgInd quality configuration
LTE
indicator

Minimum RX signal BTS3900, BTS3900

EutranInterNFreq QqualMin
quality LTE

Frequency Priority
BTS3900, BTS3900
EutranInterNFreq ConnFreqPriority for Connected
LTE
Mode
 Mobility Load
BTS3900, BTS3900
EutranInterNFreq MlbTargetInd Balancing Target
LTE
Indicator

Frequency Priority
FreqPriBasedHoMe BTS3900, BTS3900
EutranInterNFreq Based Ho Measure
asFlag LTE
Flag
 IdleMlbUERelease Idle MLB UE BTS3900, BTS3900
EutranInterNFreq
Ratio Release Ratio LTE

MLB Frequency BTS3900, BTS3900

EutranInterNFreq MlbFreqPriority
Priority LTE
 Frequency Offset
BTS3900, BTS3900
EutranInterNFreq QoffsetFreqConn for Connected
LTE
Mode

Measurement BTS3900, BTS3900

EutranInterNFreq MeasFreqPriority
Frequency Priority LTE

Cov-based Inter-
BTS3900, BTS3900
EutranInterNFreq IfHoThdRsrpOffset Freq HO Thd RSRP
LTE
Offset
 Inter-Freq Mlb
BTS3900, BTS3900
EutranInterNFreq IfMlbThdRsrpOffset Threshold RSRP
LTE
Offset

BTS3900, BTS3900
EutranInterNFreq MasterBandFlag Master Band Flag
LTE

Inter Frequency
InterFreqRanSharin BTS3900, BTS3900
EutranInterNFreq RAN Sharing
gInd LTE
Indication
 InterFreqHighSpee Inter-frequency BTS3900, BTS3900
EutranInterNFreq
dFlag Highspeed Flag LTE

BTS3900, BTS3900
EutranInterNFreq AnrInd ANR Indication
LTE
 BTS3900, BTS3900
EutranInterNFreq VoipPriority Voip Priority
LTE

ANR Frequency BTS3900, BTS3900

EutranInterNFreq FreqPriorityForAnr
Priority LTE
 Backoff Target BTS3900, BTS3900
EutranInterNFreq BackoffTargetInd
Indicator LTE

MLB Inter-Freq
MlbInterFreqHoEve BTS3900, BTS3900
EutranInterNFreq Handover Event
ntType LTE
Type
 UlTrafficMlbTargetIn UL Traffic MLB BTS3900, BTS3900
EutranInterNFreq
d Target Indicator LTE

UL Traffic MLB BTS3900, BTS3900

EutranInterNFreq UlTrafficMlbPriority
Priority LTE

BTS3900, BTS3900
EutranInterNFreq CtrlMode Control Mode
LTE

BTS3900, BTS3900
InterFreqBlkCell LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
InterFreqBlkCell DlEarfcn Downlink EARFCN
LTE

Start physical cell BTS3900, BTS3900

InterFreqBlkCell PhyCellId
ID LTE

BTS3900, BTS3900
InterFreqBlkCell CellName Cell name
LTE

Physical cell ID BTS3900, BTS3900

InterFreqBlkCell PhyCellIdRange
range LTE

EutranInterFreqNC BTS3900, BTS3900

LocalCellId Local cell ID
ell LTE

EutranInterFreqNC Mobile country BTS3900, BTS3900

Mcc
ell code LTE

EutranInterFreqNC Mobile network BTS3900, BTS3900

Mnc
ell code LTE

EutranInterFreqNC BTS3900, BTS3900

eNodeBId eNodeB ID
ell LTE
EutranInterFreqNC BTS3900, BTS3900
CellId Cell ID
ell LTE

EutranInterFreqNC BTS3900, BTS3900

CellIndividualOffset Cell individual offset
ell LTE
EutranInterFreqNC BTS3900, BTS3900
CellQoffset Cell offset
ell LTE

EutranInterFreqNC No handover BTS3900, BTS3900

NoHoFlag
ell indicator LTE

EutranInterFreqNC BTS3900, BTS3900

NoRmvFlag No remove indicator
ell LTE
EutranInterFreqNC Blind handover BTS3900, BTS3900
BlindHoPriority
ell Priority LTE

EutranInterFreqNC BTS3900, BTS3900

AnrFlag ANR flag
ell LTE

EutranInterFreqNC BTS3900, BTS3900

LocalCellName Local cell name
ell LTE
EutranInterFreqNC NeighbourCellNam Neighbour cell BTS3900, BTS3900
ell e name LTE
EutranInterFreqNC Cell Measure BTS3900, BTS3900
CellMeasPriority
ell Priority LTE

EutranInterFreqNC BTS3900, BTS3900

OverlapInd Overlap Indicator
ell LTE

EutranInterFreqNC BTS3900, BTS3900

OverlapRange Overlap Range
ell LTE

EutranInterFreqNC Neighbor Cell BTS3900, BTS3900

NCellClassLabel
ell Classification Label LTE
EutranInterFreqNC BTS3900, BTS3900
CtrlMode Control Mode
ell LTE

EutranInterFreqNC BTS3900, BTS3900

PhyCellId Physical cell ID
ell LTE

EutranInterFreqNC BTS3900, BTS3900

DlEarfcn Downlink EARFCN
ell LTE
 Mobile country BTS3900, BTS3900
EutranExternalCell Mcc
code LTE

Mobile network BTS3900, BTS3900

EutranExternalCell Mnc
code LTE

BTS3900, BTS3900
EutranExternalCell eNodeBId eNodeB ID
LTE

BTS3900, BTS3900
EutranExternalCell CellId Cell ID
LTE
 BTS3900, BTS3900
EutranExternalCell DlEarfcn Downlink EARFCN
LTE

Uplink EARFCN BTS3900, BTS3900

EutranExternalCell UlEarfcnCfgInd
indicator LTE

BTS3900, BTS3900
EutranExternalCell UlEarfcn Uplink EARFCN
LTE

BTS3900, BTS3900
EutranExternalCell PhyCellId Physical cell ID
LTE
 BTS3900, BTS3900
EutranExternalCell Tac Tracking area code
LTE

BTS3900, BTS3900
EutranExternalCell CellName Cell name
LTE

EutranExternalCell External E-UTRAN BTS3900, BTS3900

EutranExternalCell
SlaveBand Cell Slave Band LTE

MultiBand.FreqBan BTS3900, BTS3900

EutranExternalCell Frequency band
d LTE
 Roaming Area BTS3900, BTS3900
EutranExternalCell RoamingAreaHoInd
Handover Indicator LTE

BTS3900, BTS3900
EutranExternalCell CtrlMode Control Mode
LTE

Cdma2000BcSCell BTS3900, BTS3900

LocalCellId Local cell ID
Op LTE

Cdma2000BcSCell BTS3900, BTS3900

BandClass Band class
Op LTE

Cdma2000BcSCell BTS3900, BTS3900

CnOperatorID Cn operator ID
Op LTE
 CDMA2000 1xRTT
Cdma2000BcSCell Cdma1XrttCellRese BTS3900, BTS3900
dedicated priority
Op lPriInd LTE
configure indicator

CDMA2000 1xRTT
Cdma2000BcSCell Cdma1XrttCellRese BTS3900, BTS3900
Cell Reselection
Op lDediPri LTE
Dedicated Priority

CDMA2000 HRPD
Cdma2000BcSCell HrpdCellReselDedi BTS3900, BTS3900
dedicated priority
Op PriCfgInd LTE
configure indicator

CDMA2000 HRPD
Cdma2000BcSCell HrpdCellReselDedi BTS3900, BTS3900
Cell Reselection
Op Pri LTE
Dedicated Priority

EutranNFreqRanSh BTS3900, BTS3900

LocalCellId Local cell ID
are LTE

EutranNFreqRanSh BTS3900, BTS3900

DlEarfcn Downlink EARFCN
are LTE

EutranNFreqRanSh Mobile country BTS3900, BTS3900

Mcc
are code LTE
EutranNFreqRanSh Mobile network BTS3900, BTS3900
Mnc
are code LTE

Cell reselection
EutranNFreqRanSh CellReselPriorityCfg BTS3900, BTS3900
priority configure
are Ind LTE
indicator

EutranNFreqRanSh Cell reselection BTS3900, BTS3900

CellReselPriority
are priority LTE

EutranNFreqSCellO BTS3900, BTS3900

LocalCellId Local cell ID
p LTE

EutranNFreqSCellO BTS3900, BTS3900

DlEarfcn Downlink EARFCN
p LTE

EutranNFreqSCellO BTS3900, BTS3900

CnOperatorID Cn operator ID
p LTE

Cell reselection
EutranNFreqSCellO CellReselDediPriCf BTS3900, BTS3900
dedicated priority
p gInd LTE
configure indicator
EutranNFreqSCellO Cell reselection BTS3900, BTS3900
CellReselDediPri
p dedicated priority LTE

GeranNFGroupSCe BTS3900, BTS3900

LocalCellId Local cell ID
llOp LTE

GeranNFGroupSCe BTS3900, BTS3900

BcchGroupId BCCH group ID
llOp LTE

GeranNFGroupSCe BTS3900, BTS3900

CnOperatorID Cn operator ID
llOp LTE

Cell reselection
GeranNFGroupSCe CellReselDediPriCf BTS3900, BTS3900
dedicated priority
llOp gInd LTE
configure indicator

GeranNFGroupSCe Cell reselection BTS3900, BTS3900

CellReselDediPri
llOp dedicated priority LTE

BTS3900, BTS3900
GeranRanShare LocalCellId Local cell ID
LTE

BTS3900, BTS3900
GeranRanShare BcchGroupId BCCH group ID
LTE
 Mobile country BTS3900, BTS3900
GeranRanShare Mcc
code LTE

Mobile network BTS3900, BTS3900

GeranRanShare Mnc
code LTE

Cell reselection
CellReselPriorityCfg BTS3900, BTS3900
GeranRanShare priority configure
Ind LTE
indicator

Cell reselection BTS3900, BTS3900

GeranRanShare CellReselPriority
priority LTE

BTS3900, BTS3900
UtranNCell LocalCellId Local cell ID
LTE

Mobile country BTS3900, BTS3900

UtranNCell Mcc
code LTE
 Mobile network BTS3900, BTS3900
UtranNCell Mnc
code LTE

BTS3900, BTS3900
UtranNCell RncId RNC ID
LTE

BTS3900, BTS3900
UtranNCell CellId RNC cell ID
LTE

No handover BTS3900, BTS3900

UtranNCell NoHoFlag
indicator LTE

BTS3900, BTS3900
UtranNCell NoRmvFlag No remove indicator
LTE

BTS3900, BTS3900
UtranNCell AnrFlag ANR flag
LTE
 Blind handover BTS3900, BTS3900
UtranNCell BlindHoPriority
priority LTE

Cell Measure BTS3900, BTS3900

UtranNCell CellMeasPriority
Priority LTE

BTS3900, BTS3900
UtranNCell OverlapInd Overlap Indicator
LTE
 Neighbering Cell BTS3900, BTS3900
UtranNCell NCellMeasPriority
Measure Priority LTE
 BTS3900, BTS3900
UtranNCell LocalCellName Local cell name
LTE

NeighbourCellNam Neighbour cell BTS3900, BTS3900

UtranNCell
e name LTE
 BTS3900, BTS3900
UtranNCell CtrlMode Control Mode
LTE

BTS3900, BTS3900
UtranNCell eNodeBId eNodeB ID
LTE

URimBeginningTim BTS3900, BTS3900

UtranNCell Rim latest start time
e LTE

ULastRimUpdating RIM latest update BTS3900, BTS3900

UtranNCell
Time time LTE

ULastRimLoadUpd cell load RIM latest BTS3900, BTS3900

UtranNCell
atingTime update time LTE

URimLoadStartTim Cell load Rim latest BTS3900, BTS3900

UtranNCell
e start time LTE

UMTS cell load BTS3900, BTS3900

UtranNCell URimLoadStatus
status LTE

BTS3900, BTS3900
UtranNFreqSCellOp LocalCellId Local cell ID
LTE

BTS3900, BTS3900
UtranNFreqSCellOp UtranDlArfcn Downlink UARFCN
LTE

BTS3900, BTS3900
UtranNFreqSCellOp CnOperatorID Cn operator ID
LTE
 Cell reselection
CellReselDediPriCf BTS3900, BTS3900
UtranNFreqSCellOp dedicated priority
gInd LTE
configure indicator

Cell reselection BTS3900, BTS3900

UtranNFreqSCellOp CellReselDediPri
dedicated priority LTE

BTS3900, BTS3900
UtranRanShare LocalCellId Local cell ID
LTE

BTS3900, BTS3900
UtranRanShare UtranDlArfcn Downlink UARFCN
LTE
 Mobile country BTS3900, BTS3900
UtranRanShare Mcc
code LTE

Mobile network BTS3900, BTS3900

UtranRanShare Mnc
code LTE

Cell reselection
CellReselPriorityCfg BTS3900, BTS3900
UtranRanShare priority configure
Ind LTE
indicator

Cell reselection BTS3900, BTS3900

UtranRanShare CellReselPriority
priority LTE

BTS3900, BTS3900
UtranNFreq LocalCellId Local cell ID
LTE
 BTS3900, BTS3900
UtranNFreq UtranDlArfcn Downlink UARFCN
LTE

BTS3900, BTS3900
UtranNFreq UtranVersion UTRAN version
LTE

UTRAN cell type BTS3900, BTS3900

UtranNFreq UtranFddTddType
indicator LTE
 Uplink UARFCN BTS3900, BTS3900
UtranNFreq UtranUlArfcnCfgInd
indicator LTE
 BTS3900, BTS3900
UtranNFreq UtranUlArfcn Uplink UARFCN
LTE

CellReselPriorityCfg Reselection priority BTS3900, BTS3900

UtranNFreq
Ind configure indicator LTE

Cell reselection BTS3900, BTS3900

UtranNFreq CellReselPriority
priority LTE

BTS3900, BTS3900
UtranNFreq PmaxUtran PMAX
LTE
 BTS3900, BTS3900
UtranNFreq OffsetFreq Frequency offset
LTE

Minimum required BTS3900, BTS3900

UtranNFreq Qqualmin
quality level LTE
 Minimum required BTS3900, BTS3900
UtranNFreq QRxLevMin
RX level LTE

UTRAN high priority BTS3900, BTS3900

UtranNFreq ThreshXHigh
threshold LTE

UTRAN lower BTS3900, BTS3900

UtranNFreq ThreshXLow
priority threshold LTE

UTRAN high priority BTS3900, BTS3900

UtranNFreq ThreshXHighQ
RSRQ threshold LTE
 UTRAN low priority BTS3900, BTS3900
UtranNFreq ThreshXLowQ
RSRQ threshold LTE

BTS3900, BTS3900
UtranNFreq PsPriority PS service priority
LTE
 BTS3900, BTS3900
UtranNFreq CsPriority CS service priority
LTE

Frequency Priority
BTS3900, BTS3900
UtranNFreq ConnFreqPriority for Connected
LTE
Mode
 CS and PS mixed BTS3900, BTS3900
UtranNFreq CsPsMixedPriority
priority LTE

ContinuCoverageIn Continuous BTS3900, BTS3900

UtranNFreq
dication Coverage Indication LTE

MLB Frequency BTS3900, BTS3900

UtranNFreq MlbFreqPriority
Priority LTE
 BTS3900, BTS3900
UtranNFreq MasterBandFlag Master Band Flag
LTE

UTRAN Frequency
UtranRanSharingIn BTS3900, BTS3900
UtranNFreq RAN Sharing
d LTE
Indication
 BTS3900, BTS3900
UtranNFreq AnrInd ANR Indication
LTE

SRVCC Service BTS3900, BTS3900

UtranNFreq SrvccPriority
Priority LTE
 UMTS/LTE Shared BTS3900, BTS3900
UtranNFreq ULSharedFreqInd
Frequency Indicator LTE

ANR Frequency BTS3900, BTS3900

UtranNFreq FreqPriorityForAnr
Priority LTE

Mobile country BTS3900, BTS3900

UtranExternalCell Mcc
code LTE

Mobile network BTS3900, BTS3900

UtranExternalCell Mnc
code LTE

BTS3900, BTS3900
UtranExternalCell RncId RNC ID
LTE
 BTS3900, BTS3900
UtranExternalCell CellId RNC cell ID
LTE

BTS3900, BTS3900
UtranExternalCell UtranDlArfcn Downlink UARFCN
LTE
 Uplink UARFCN BTS3900, BTS3900
UtranExternalCell UtranUlArfcnCfgInd
configure indicator LTE
 BTS3900, BTS3900
UtranExternalCell UtranUlArfcn Uplink UARFCN
LTE

UTRAN cell type BTS3900, BTS3900

UtranExternalCell UtranFddTddType
indicator LTE

Routing area code BTS3900, BTS3900

UtranExternalCell RacCfgInd
configure indicator LTE
 BTS3900, BTS3900
UtranExternalCell Rac Routing area code
LTE

Primary scrambling BTS3900, BTS3900

UtranExternalCell PScrambCode
code LTE

BTS3900, BTS3900
UtranExternalCell Lac Location area code
LTE
 BTS3900, BTS3900
UtranExternalCell CellName Cell name
LTE

CS and PS BTS3900, BTS3900

UtranExternalCell CsPsHOInd
handover indicator LTE

UtranExternalCellSl External UTRAN BTS3900, BTS3900

UtranExternalCell
aveBand Cell Slave Band LTE

MultiBand.FreqBan BTS3900, BTS3900

UtranExternalCell Frequency band
d LTE
 Roaming Area BTS3900, BTS3900
UtranExternalCell RoamingAreaHoInd
Handover Indicator LTE

BTS3900, BTS3900
UtranExternalCell CtrlMode Control Mode
LTE

BbpCollaborateGrpI BBP Collaboration BTS3900, BTS3900

BbpCollaborateGrp
d Group ID LTE

Baseband BTS3900, BTS3900

BbpCollaborateGrp BasebandEqmId
Equipment ID LTE
 BbpLoadBalanceSt BBP Load Balance BTS3900, BTS3900
BbpCollaborateGrp
atus Status LTE

Load Balance
LBUnavailableReas BTS3900, BTS3900
BbpCollaborateGrp Unavailable
on LTE
Reason

BbpCollaborateLBT BBP Load Balance BTS3900, BTS3900

BbpCollaborateGrp
ype Type LTE

BbpCollaborateCab BTS3900, BTS3900

BbpCollaborateGrp Cabinet No.
inetNo LTE
 BbpCollaborateSub BTS3900, BTS3900
BbpCollaborateGrp Subrack No.
rackNo LTE

BbpCollaborateSlot BTS3900, BTS3900

BbpCollaborateGrp Slot No.
No LTE

BbpCollaborateBloc BBP Collaboration BTS3900, BTS3900

BbpCollaborateGrp
kTimer Group Block Timer LTE
 BbpCollaborateTrig BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp
gerThd Trigger Threshold LTE
 BbpCollaborateCle BBP Collaboration BTS3900, BTS3900
BbpCollaborateGrp
arThd Clear Threshold LTE

BTS3900, BTS3900
BbpCollaborateGrp BlockPriority Block Priority
LTE
 TrafficFaultyDetect Traffic Faulty Detect BTS3900, BTS3900
eNodeBAlmCfg
Period Period LTE

Service Interface
BTS3900, BTS3900
eNodeBAlmCfg SrvIntfAlmCfgSw Alarm Configure
LTE
Switch
ENodeBFrameOffs BTS3900, BTS3900
TddFrameOffset TDD Frame Offset
et LTE

ENodeBFrameOffs BTS3900, BTS3900

FddFrameOffset FDD Frame Offset
et LTE

Cluster Partition
PrtNodeBaseBand BTS3900, BTS3900
EuCoSchCfg Node Base Band
EqmId LTE
Equipment Id
 Coordinated
BTS3900, BTS3900
EuCoSchCfg WorkMode Scheduling Work
LTE
Mode

Coordinated
EuCoSchDLCoMP BTS3900, BTS3900
CordInfoEffDelay Information
Cfg LTE
Effective Delay

Inter-eNodeB
EuCoSchDLCoMP InterEnbDlCompSw BTS3900, BTS3900
DlCoMP Algorithm
Cfg itch LTE
Switch
 Coordinated
EuCoSchDLCoMP BTS3900, BTS3900
EuCoSchUeSpec Schedule Ue
Cfg LTE
Specification

Coordination Infor
EuCoSchDLCoMP CordInfoEffDelayM BTS3900, BTS3900
Effective Delay
Cfg ode LTE
Mode

BbResCapacityMod BTS3900, BTS3900

FddResMode BbCapabilityMode
e LTE
 SFN Capability BTS3900, BTS3900
FddResMode SfnCapabilityMode
Mode LTE

Baseband
BbResExclusiveSwi BTS3900, BTS3900
FddResMode Equipment
tch LTE
Exclusive Switch

BTS3900, BTS3900
LIOptAtomRule AtomRuleID Atom Rule ID
LTE

Measurement BTS3900, BTS3900

LIOptAtomRule MeasureObjType
Object Type LTE
 BTS3900, BTS3900
LIOptAtomRule ConditionType Condition Type
LTE

Threshold for
ThresholdforNumPa BTS3900, BTS3900
LIOptAtomRule Numerical
ra LTE
Parameter

Measurement BTS3900, BTS3900

LIOptAtomRule MeasureObject
Object LTE

Intelligent
BTS3900, BTS3900
LIOptFeature IOptFeatureID Optimization
LTE
Feature ID

Intelligent
BTS3900, BTS3900
LIOptFeature IOptFeatureName Optimization
LTE
Feature Name
 Intelligent
BTS3900, BTS3900
LIOptFunction IOptFunctionID Optimization
LTE
Function ID

Intelligent
BTS3900, BTS3900
LIOptFunction IOptFunctionName Optimization
LTE
Function Name

Intelligent
BTS3900, BTS3900
LIOptFunction IOptFeatureID Optimization
LTE
Feature ID

Measurement BTS3900, BTS3900

LIOptFunction MeasureObjType
Object Type LTE

BTS3900, BTS3900
LIOptFunction LocalCellId Local Cell ID
LTE

BTS3900, BTS3900
LIOptFunction Status Status
LTE
 BTS3900, BTS3900
LIOptRule RuleID Rule ID
LTE

BTS3900, BTS3900
LIOptRule LocalCellId Local Cell ID
LTE

BTS3900, BTS3900
LIOptRule ActionType Action Type
LTE

AtomRuleRelationT Relationship Type BTS3900, BTS3900

LIOptRule
ype of Atom Rule LTE

BTS3900, BTS3900
LIOptRule Period Period
LTE

BTS3900, BTS3900
LIOptRule Action Action
LTE

Intelligent
BTS3900, BTS3900
LIOptRule IOptFunctionID Optimization
LTE
Function ID
 BTS3900, BTS3900
LIOptRule PenaltyTime Penalty Time
LTE

BTS3900, BTS3900
LIOptRule AdaptiveRAT Adaptive RAT
LTE

BTS3900, BTS3900
LIOptRule ActiveStatus Active Status
LTE

BTS3900, BTS3900
LIOptRule ExecutiveStatus Executive Status
LTE

BTS3900, BTS3900
LIOptRuleMember RuleID Rule ID
LTE

BTS3900, BTS3900
LIOptRuleMember AtomRuleID Atom Rule ID
LTE

BTS3900, BTS3900
LIOptRuleMember ActiveStatus Active Status
LTE

Mobile Country BTS3900, BTS3900

NCellPlmnList Mcc
Code LTE

Mobile Network BTS3900, BTS3900

NCellPlmnList Mnc
Code LTE
 BTS3900, BTS3900
NCellPlmnList RatType Rat Type
LTE

BTS3900, BTS3900
NCellPlmnList PlmnListType Plmn List Type
LTE

PCC Downlink BTS3900, BTS3900

PccFreqCfg PccDlEarfcn
EARFCN LTE

Preferred PCC BTS3900, BTS3900

PccFreqCfg PreferredPccPriority
Priority LTE
 PCC A4 RSRP BTS3900, BTS3900
PccFreqCfg PccA4RsrpThd
Threshold LTE

PCC A4 RSRQ BTS3900, BTS3900

PccFreqCfg PccA4RsrqThd
Threshold LTE

PIM Cell Group BTS3900, BTS3900

PIMCellGroup PIMCellGroupId
Identity LTE

BTS3900, BTS3900
PIMCellGroup Cell1Id Cell1 Local Cell ID
LTE

BTS3900, BTS3900
PIMCellGroup Cell2Id Cell2 Local Cell ID
LTE

Cell1 Sector BTS3900, BTS3900

PIMCellGroup Cell1SectorEqmId
Equipment Identity LTE
 Cell2 Sector BTS3900, BTS3900
PIMCellGroup Cell2SectorEqmId
Equipment Identity LTE

BTS3900, BTS3900
PIMCellGroup Cell1PIMState Cell1 PIM State
LTE

BTS3900, BTS3900
PIMCellGroup Cell2PIMState Cell2 PIM State
LTE

PCC Downlink BTS3900, BTS3900

SccFreqCfg PccDlEarfcn
EARFCN LTE

SCC Downlink BTS3900, BTS3900

SccFreqCfg SccDlEarfcn
EARFCN LTE
 BTS3900, BTS3900
SccFreqCfg SccPriority SCC Priority
LTE

BTS3900, BTS3900
SccFreqCfg SccA2Offset SCC A2 Offset
LTE

BTS3900, BTS3900
SccFreqCfg SccA4Offset SCC A4 Offset
LTE
 BTS3900, BTS3900
ServiceDiffSetting QueueWeight0 Queue0 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight1 Queue1 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight2 Queue2 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight3 Queue3 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight4 Queue4 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight5 Queue5 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight6 Queue6 Weight
LTE

BTS3900, BTS3900
ServiceDiffSetting QueueWeight7 Queue7 Weight
LTE

ANR delete cell BTS3900, BTS3900

ANR DelCellThd
threshold LTE
 Least Handover BTS3900, BTS3900
ANR NcellHoStatNum
Num for Statistic LTE

BTS3900, BTS3900
ANR StatisticPeriod Statistic cycle
LTE

Fast ANR PCI BTS3900, BTS3900

ANR FastAnrRprtAmount
report amount LTE

Fast ANR PCI BTS3900, BTS3900

ANR FastAnrRprtInterval
report interval LTE
 FastAnrCheckPerio Fast ANR checking BTS3900, BTS3900
ANR
d period LTE

Fast ANR
BTS3900, BTS3900
ANR FastAnrRsrpThd measurement
LTE
RSRP threshold

IntraRat Fast ANR

FastAnrIntraRatMe BTS3900, BTS3900
ANR measurement UE
asUeNum LTE
number
 InterRat Fast ANR
FastAnrInterRatMe BTS3900, BTS3900
ANR measurement UE
asUeNum LTE
number

IntraRat Fast ANR

FastAnrIntraRatUe BTS3900, BTS3900
ANR valid measurement
NumThd LTE
min UE number

InterRat Fast ANR

FastAnrInterRatUe BTS3900, BTS3900
ANR valid measurement
NumThd LTE
min UE number
 BTS3900, BTS3900
ANR OptMode Optimization Mode
LTE

StatisticPeriodForN Statistic Cycle For BTS3900, BTS3900

ANR
RTDel Delete NRT LTE

StatisticNumForNR Statistic Number BTS3900, BTS3900

ANR
TDel For Delete NRT LTE
 ANR Active PCI
ActivePciConflictSw BTS3900, BTS3900
ANR Conflict Detection
itch LTE
Switch

BTS3900, BTS3900
ANR StartTime Start time
LTE
 BTS3900, BTS3900
ANR StopTime Stop time
LTE

UTRAN Fast ANR BTS3900, BTS3900

ANR FastAnrRscpThd
RSCP threshold LTE

GERAN Fast ANR BTS3900, BTS3900

ANR FastAnrRssiThd
RSSI threshold LTE

CDMA2000 1XRTT
FastAnrCdma1xrttP BTS3900, BTS3900
ANR Fast ANR Pilot
ilotThd LTE
threshold

CDMA2000 HRPD
FastAnrCdmahrpdP BTS3900, BTS3900
ANR Fast ANR Pilot
ilotThd LTE
threshold

Set not handover BTS3900, BTS3900

ANR NoHoSetThd
attribute threshold LTE
 NcellHoForNRTDel Handover threshold BTS3900, BTS3900
ANR
Thd for delete NRT LTE

BTS3900, BTS3900
ANR FastAnrMode Fast ANR Mode
LTE
 BTS3900, BTS3900
ANR EventAnrMode Event ANR Mode
LTE
 BTS3900, BTS3900
ANR CaUeChoseMode CA UE Chose Mode
LTE
 AnrControlledHoStr Anr Controlled BTS3900, BTS3900
ANR
ategy Handover Strategy LTE
 SmartPreallocation Smart Preallocation BTS3900, BTS3900
ANR
Mode Mode LTE

No Handover Set BTS3900, BTS3900

ANR NoHoSetMode
Mode LTE
 UtranEventAnrMod Utran Event ANR BTS3900, BTS3900
ANR
e Mode LTE
 GeranEventAnrMod Geran Event ANR BTS3900, BTS3900
ANR
e Mode LTE
 EventAnrWithVoipM Event ANR With BTS3900, BTS3900
ANR
ode VoIP Mode LTE
 UtranEventAnrCgiTi UTRAN Event ANR BTS3900, BTS3900
ANR
mer CGI Timer LTE

GeranEventAnrCgi GERAN Event ANR BTS3900, BTS3900

ANR
Timer CGI Timer LTE
 BTS3900, BTS3900
ANR NrtDelMode NRT Delete Mode
LTE

Optimization Mode BTS3900, BTS3900

ANR OptModeStrategy
Strategy LTE
 Utran Handover
UtranNcellHoForNR BTS3900, BTS3900
ANR Threshold for
TDelThd LTE
Delete NRT

Geran Handover
GeranNcellHoForN BTS3900, BTS3900
ANR Threshold for
RTDelThd LTE
Delete NRT

Neighbor Cell
NcellDelPunishPeri BTS3900, BTS3900
ANR Deletion Punish
od LTE
Period

EUTRAN Neighbor
EutranNcellDelPun BTS3900, BTS3900
ANR Cell Deletion
Num LTE
Punish Number
 UTRAN Neighbor
UtranNcellDelPunN BTS3900, BTS3900
ANR Cell Deletion
um LTE
Punish Number

Period for
PeriodForNCellRan BTS3900, BTS3900
ANR Neighboring Cell
king LTE
Ranking

Statistic Period For

StatPeriodForNcell BTS3900, BTS3900
NCellClassMgt Neighbor Cell
Class LTE
Classification
 Handover Attempt BTS3900, BTS3900
NCellClassMgt HoAttemptThd
Threshold LTE

BTS3900, BTS3900
BfAnt DEVICENO Device No.
LTE
 BTS3900, BTS3900
BfAnt Manufactory Manufactory
LTE

Connect RRU BTS3900, BTS3900

BfAnt CONNCN
cabinet No. LTE

Connect RRU BTS3900, BTS3900

BfAnt CONNSRN
subrack No. LTE
 Connect RRU slot BTS3900, BTS3900
BfAnt CONNSN
No. LTE

Antenna model BTS3900, BTS3900

BfAnt MODELNO
number LTE

BTS3900, BTS3900
BfAnt TILT Tilt
LTE

BTS3900, BTS3900
BfAnt BEAMWIDTH Beamwidth
LTE

BTS3900, BTS3900
BfAnt Band Band
LTE

BTS3900, BTS3900
BfAnt TYPE Antenna Type
LTE

BTS3900, BTS3900
BfAnt BFANTBEARING BFANTBEARING
LTE

BTS3900, BTS3900
BfAnt POLARMODE Polar Mode
LTE

Element Beamform BTS3900, BTS3900

BfAnt ELMTBMWTH
Width LTE
 BTS3900, BTS3900
BfAnt AntPortNum Number of Port
LTE

Amplitude Offset of
Crs2PortPhyPort1A BTS3900, BTS3900
BfAnt Physical Port 1 for
mp LTE
CRS2

Crs2PortPhyPort1P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 1 for CRS2 LTE

Amplitude Offset of
Crs2PortPhyPort2A BTS3900, BTS3900
BfAnt Physical Port 2 for
mp LTE
CRS2

Crs2PortPhyPort2P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 2 for CRS2 LTE

Amplitude Offset of
Crs2PortPhyPort3A BTS3900, BTS3900
BfAnt Physical Port 3 for
mp LTE
CRS2

Crs2PortPhyPort3P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 3 for CRS2 LTE

Amplitude Offset of
Crs2PortPhyPort4A BTS3900, BTS3900
BfAnt Physical Port 4 for
mp LTE
CRS2

Crs2PortPhyPort4P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 4 for CRS2 LTE

Amplitude Offset of
Crs4PortPhyPort1A BTS3900, BTS3900
BfAnt Physical Port 1 for
mp LTE
CRS4

Crs4PortPhyPort1P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 1 for CRS4 LTE

Amplitude Offset of
Crs4PortPhyPort2A BTS3900, BTS3900
BfAnt Physical Port 2 for
mp LTE
CRS4

Crs4PortPhyPort2P Phase of Physical BTS3900, BTS3900

BfAnt
ha Port 2 for CRS4 LTE
 BTS3900, BTS3900
BfAnt SE Session ID
LTE

BTS3900, BTS3900
BlindNcellOpt StatisticPeriod Statistic Period
LTE

Sample Number BTS3900, BTS3900

BlindNcellOpt SampleNumThd
Threshold LTE

Handover Success BTS3900, BTS3900

BlindNcellOpt HoSuccRateThd
Ratio Threshold LTE

CSFB Handover
CsfbHoAttempRatio BTS3900, BTS3900
BlindNcellOpt Attemption Ratio
Thd LTE
Threshold

Blind Handover
BlindHoSuccRateT BTS3900, BTS3900
BlindNcellOpt Success Ratio
hd LTE
Threshold

BTS3900, BTS3900
BlindNcellOpt OptMode Optimization Mode
LTE
 Differentiated
BTS3900, BTS3900
IpServiceQos Dscp Services Code
LTE
Point

BTS3900, BTS3900
IpServiceQos Description Traffic Description
LTE

QosPolicyTimeSwit QoS Policy Time BTS3900, BTS3900

IpServiceQos
ch Switch LTE

First QoS Policy BTS3900, BTS3900

IpServiceQos FirQosPolicyId
Identity LTE

FirQosPolicyTimeLe First QoS Policy BTS3900, BTS3900

IpServiceQos
ngth Time Length LTE

Second QoS Policy BTS3900, BTS3900

IpServiceQos SecQosPolicyId
Identity LTE

QoEBasedHandove QoE-Based BTS3900, BTS3900

QoEHoCommonCfg
rStat Handover Stat LTE
 QoEBasedHandove QoE-Based BTS3900, BTS3900
QoEHoCommonCfg
rLast Handover Last LTE

BTS3900, BTS3900
QosPolicy QosPolicyId QoS Policy Identity
LTE

BTS3900, BTS3900
QosPolicy TrafficType Traffic Type
LTE
 Priority Queue BTS3900, BTS3900
QosPolicy PriQueueId
Identity LTE

Downlink Service BTS3900, BTS3900

QosPolicy DlSgbr
Grant Bit Rate LTE

Downlink Service BTS3900, BTS3900

QosPolicy DlSmbr
Maximum Bit Rate LTE
 BTS3900, BTS3900
CaGroup CaGroupId CA Group Identity
LTE

BTS3900, BTS3900
CaGroup CaGroupType CA Group Type
LTE
 CA Group Type BTS3900, BTS3900
CaGroup CaGroupTypeInd
Indication LTE

BTS3900, BTS3900
CaGroupCell CaGroupId CA Group Identity
LTE

BTS3900, BTS3900
CaGroupCell LocalCellId Local Cell ID
LTE
 BTS3900, BTS3900
CaGroupCell eNodeBId eNodeB ID
LTE

PreferredPCellPriori Preferred PCell BTS3900, BTS3900

CaGroupCell
ty Priority LTE
 PCell A4 RSRP BTS3900, BTS3900
CaGroupCell PCellA4RsrpThd
Threshold LTE

PCell A4 RSRQ BTS3900, BTS3900

CaGroupCell PCellA4RsrqThd
Threshold LTE

Carrier Aggregation
BTS3900, BTS3900
CaGroupCell TDDDl3ccCaLic for Downlink
LTE
3CC(TDD)

Flexible CA from
TDDFlexCafrmMulti BTS3900, BTS3900
CaGroupCell Multiple
Carr LTE
Carriers(TDD)
 Carrier Aggregation
BTS3900, BTS3900
CaGroupCell TDDDl4CcCaLic for Downlink
LTE
4CC(TDD)

Carrier Aggregation
BTS3900, BTS3900
CaGroupCell TDDUlCaLic for Uplink
LTE
2CC(TDD)

Downlink Carrier BTS3900, BTS3900

CaGroupCell DlCaForCmccTdd
Aggregation(TDD) LTE

Period update BTS3900, BTS3900

CellIdPrdUpt PrdUptSwitch
switch LTE

BTS3900, BTS3900
CellIdPrdUpt ActionTime Action time
LTE

BTS3900, BTS3900
CellIdPrdUpt Period Period
LTE

CSPC Algorithm BTS3900, BTS3900

CspcAlgoPara CspcAlgoSwitch
Switch LTE

CspcRsrpMeasMod CSPC RSRP BTS3900, BTS3900

CspcAlgoPara
e Measurement Mode LTE

CSPC Cluster BTS3900, BTS3900

CspcAlgoPara CspcClusterMode
Mode LTE
 CspcClusterPartPer CSPC Cluster BTS3900, BTS3900
CspcAlgoPara
iod Partition Period LTE

CspcComputeSwitc CSPC Compute BTS3900, BTS3900

CspcAlgoPara
h Switch LTE

CspcFullPowerSubf CSPC Full Power BTS3900, BTS3900

CspcAlgoPara
rameRatio Subframe Ratio LTE
 CspcPowerConfigD CSPC Power BTS3900, BTS3900
CspcAlgoPara
elay Config Delay LTE

CspcScheduleUeS CSPC Schedule UE BTS3900, BTS3900

CspcAlgoPara
pec Specification LTE
 CSPC Enable
CspcEnableDlPrbR BTS3900, BTS3900
CspcAlgoPara Downlink PRB
atioThd LTE
Ratio Threshold

TDD Cspc BTS3900, BTS3900

CspcAlgoPara TddCspcAlgoSwitch
Algorithm Switch LTE

eNodeBUSServerCf BTS3900, BTS3900

UsServerIndex US Server Index
g LTE

eNodeBUSServerCf BTS3900, BTS3900

UsServerIP US Server IP
g LTE

eNodeBUSServerCf BTS3900, BTS3900

UsServerPort US Server Port
g LTE

eNodeBUSServerCf BTS3900, BTS3900

UsProtocolType US Protocol Type
g LTE

BTS3900, BTS3900
EutranSpePciCell DlEarfcn Downlink EARFCN
LTE

Start Physical Cell BTS3900, BTS3900

EutranSpePciCell StaPhyCellId
ID LTE
 SpePhyCellIdRang Specified Physical BTS3900, BTS3900
EutranSpePciCell
e Cell ID Range LTE

Handover Algo BTS3900, BTS3900

ENodeBAlgoSwitch HoAlgoSwitch
switch LTE
 Handover Mode BTS3900, BTS3900
ENodeBAlgoSwitch HoModeSwitch
switch LTE
 DlIcic algorithm BTS3900, BTS3900
ENodeBAlgoSwitch DlIcicSwitch
switch LTE
 ANR algorithm BTS3900, BTS3900
ENodeBAlgoSwitch AnrSwitch
switch LTE
 BTS3900, BTS3900
ENodeBAlgoSwitch RedirectSwitch Redirection switch
LTE
 MRO algorithm BTS3900, BTS3900
ENodeBAlgoSwitch MroSwitch
switch LTE

MacAssemblyOptS MAC Assembly BTS3900, BTS3900

ENodeBAlgoSwitch
witch Optimize Switch LTE

BTS3900, BTS3900
ENodeBAlgoSwitch TpeSwitch TPE switch
LTE
 SpidSelectPlmnAlg SPID-based Select BTS3900, BTS3900
ENodeBAlgoSwitch
oSwitch PLMN Algo Switch LTE

BTS3900, BTS3900
ENodeBAlgoSwitch UlIcicFreqSwitch UlIcic freq switch
LTE
 BTS3900, BTS3900
ENodeBAlgoSwitch LcsSwitch LCS switch
LTE
 BTS3900, BTS3900
ENodeBAlgoSwitch TrmSwitch TRM switch
LTE

PciConflictAlmSwitc PCI conflict alarm BTS3900, BTS3900

ENodeBAlgoSwitch
h switch LTE

BTS3900, BTS3900
ENodeBAlgoSwitch PowerSaveSwitch Power save switch
LTE
 BTS3900, BTS3900
ENodeBAlgoSwitch RimSwitch RIM switch
LTE

ANR Under RAN

RanSharingAnrSwit BTS3900, BTS3900
ENodeBAlgoSwitch Sharing Algorithm
ch LTE
Switch
 Frequency Layer BTS3900, BTS3900
ENodeBAlgoSwitch FreqLayerSwtich
Switch LTE

BTS3900, BTS3900
ENodeBAlgoSwitch CmasSwitch Cmas Switch
LTE

Voice quality
BTS3900, BTS3900
ENodeBAlgoSwitch VQMAlgoSwitch monitoring algo
LTE
switch
 UeNumPreemptSwi UE number BTS3900, BTS3900
ENodeBAlgoSwitch
tch preemption switch LTE

Multi-Operator BTS3900, BTS3900

ENodeBAlgoSwitch MultiOpCtrlSwitch
Control Switch LTE
 BTS3900, BTS3900
ENodeBAlgoSwitch OverBBUsSwitch OverBBUsSwitch
LTE

OperatorSpecificAlg Operator Specific BTS3900, BTS3900

ENodeBAlgoSwitch
oSwitch Algorithm Switch LTE
 HoSignalingOptSwit Handover Signaling BTS3900, BTS3900
ENodeBAlgoSwitch
ch Optimized Switch LTE
 CompatibilityCtrlSwi Compatibility BTS3900, BTS3900
ENodeBAlgoSwitch
tch Control Switch LTE
 BlindNcellOptSwitc Blind Ncell BTS3900, BTS3900
ENodeBAlgoSwitch
h Optimization Switch LTE

Cluster Partition
ClusterPartitionNod BTS3900, BTS3900
ENodeBAlgoSwitch Node Deployment
eFlag LTE
Flag

Support RIM by
BTS3900, BTS3900
ENodeBAlgoSwitch RimOnEcoSwitch eCoordinator
LTE
Switch
 EutranVoipSupport Eutran Voip BTS3900, BTS3900
ENodeBAlgoSwitch
Switch Support Switch LTE

CA Algorithm BTS3900, BTS3900

ENodeBAlgoSwitch CaAlgoSwitch
Switch LTE
 MLB Algorithm BTS3900, BTS3900
ENodeBAlgoSwitch MlbAlgoSwitch
Switch LTE
 Handover Common BTS3900, BTS3900
ENodeBAlgoSwitch HoCommOptSwitch
Optimized Switch LTE
 HighLoadNetOptSw High Load Network BTS3900, BTS3900
ENodeBAlgoSwitch
itch Optimized Switch LTE
 Scheduling BTS3900, BTS3900
ENodeBAlgoSwitch SchOptSwitch
Optimization Switch LTE

PrachTimeStagSwit PRACH Time BTS3900, BTS3900

ENodeBAlgoSwitch
ch Stagger Switch LTE
 High Speed Root
HighSpeedRootSeq BTS3900, BTS3900
ENodeBAlgoSwitch Sequence Cycle
CSSwitch LTE
Shift Switch

Droped Packets BTS3900, BTS3900

ENodeBAlgoSwitch DropPktsStatSwitch
Statistics Switch LTE

NCellRankingSwitc Neighboring Cell BTS3900, BTS3900

ENodeBAlgoSwitch
h Ranking Switch LTE
 EUCompactRANSw Compact RAN BTS3900, BTS3900
ENodeBAlgoSwitch
itch Switch LTE

BbpCollaborateSwit BBP Collaboration BTS3900, BTS3900

ENodeBAlgoSwitch
ch Switch LTE

Root Sequence
RootSeqConflictDet BTS3900, BTS3900
ENodeBAlgoSwitch Conflict Detect
Switch LTE
Switch
 Intelligent
BTS3900, BTS3900
ENodeBAlgoSwitch IOptAlgoSwitch Optimization
LTE
Algorithm Switch

Service HO Multiple
ServiceHoMultiTarg BTS3900, BTS3900
ENodeBAlgoSwitch Target Frequency
etFreqSw LTE
Switch

Soft Fault Self- BTS3900, BTS3900

ENodeBAlgoSwitch SFSSwitch
healing Switch LTE

PciConflictDetectS PCI Conflict Detect BTS3900, BTS3900

ENodeBAlgoSwitch
witch Switch LTE
 CA Load Balancing BTS3900, BTS3900
ENodeBAlgoSwitch CaLbAlgoSwitch
Algorithm Switch LTE

Uplink Scheduling BTS3900, BTS3900

ENodeBAlgoSwitch UlSchOptSwitch
Optimization Switch LTE

CompactRANMultiA Compact RAN BTS3900, BTS3900

ENodeBAlgoSwitch
PN Multiple APN LTE
 InterFreqIdleMlbMo Inter Frequency Idle BTS3900, BTS3900
eNodeBMlb
de MLB Mode LTE
 InterFreqIdleMlbInt Inter Frequency Idle BTS3900, BTS3900
eNodeBMlb
erval MLB Interval LTE
 Inter Frequency Idle
InterFreqIdleMlbSta BTS3900, BTS3900
eNodeBMlb MLB Statistic
Thd LTE
Threshold
 DL CA LB Max
BTS3900, BTS3900
eNodeBMlb DlCaLbMaxCCNum Component Carrier
LTE
Number

CaUeMinDataVolRa CA UE Minimum BTS3900, BTS3900

eNodeBMlb
tio Data Volume Ratio LTE

Uplink Traffic BTS3900, BTS3900

LicRatio UpLicRatio
License Ratio LTE

BTS3900, BTS3900
LicRatio TrafficSharingType Traffic Sharing Type
LTE
 BTS3900, BTS3900
LicRatioSharePolicy CnOperatorId CN Operator ID
LTE

BTS3900, BTS3900
LicRatioSharePolicy TrfRatio TrfRatio
LTE

BTS3900, BTS3900
LicRatioSharePolicy TrfSharingRatio TrfSharingRatio
LTE

MRO optimization BTS3900, BTS3900

MRO OptPeriod
period LTE

Ncell optimization BTS3900, BTS3900

MRO NcellOptThd
threshold LTE

MRO statistics BTS3900, BTS3900

MRO StatNumThd
number threshold LTE
 Pingpong handover BTS3900, BTS3900
MRO PingpongTimeThd
threshold LTE

Pingpong ratio BTS3900, BTS3900

MRO PingpongRatioThd
threshold LTE

Abnormal coverage BTS3900, BTS3900

MRO CoverAbnormalThd
threshold LTE

Serving cell RSRP BTS3900, BTS3900

MRO ServingRsrpThd
threshold LTE

Neighbour cell BTS3900, BTS3900

MRO NeighborRsrpThd
RSRP threshold LTE

UePingPongNumTh UE PingPong BTS3900, BTS3900

MRO
d Number Threshold LTE
 Inter frequency
InterFreqMeasTooL measurement too BTS3900, BTS3900
MRO
ateHoThd late handover LTE
threshold

InterFreqA2RollBac Inter frequency A2 BTS3900, BTS3900

MRO
kThd rollback threshold LTE

MRO Optimization BTS3900, BTS3900

MRO MroOptMode
Mode LTE
 Unnecessary IRAT
UnnecInterRatHoO BTS3900, BTS3900
MRO Ho Optimize
ptThd LTE
Threshold

Unnecessary
UnnecInterRatHoRs BTS3900, BTS3900
MRO InterRAT Ho RSRP
rpThd LTE
Threshold
 InterRAT A2 RSRP
InterRatA2RsrpMin BTS3900, BTS3900
MRO Adjustment Lower
Thd LTE
Limit

InterRAT MRO
InterRatStatNumTh BTS3900, BTS3900
MRO Statistics Number
d LTE
Threshold
 IntraRatTooEarlyHo IntraRat Too Early BTS3900, BTS3900
MRO
RatioThd HO Ratio Threshold LTE

IntraRatTooLateHo IntraRat Too Late BTS3900, BTS3900

MRO
RatioThd HO Ratio Threshold LTE

IntraRatAbnormalR IntraRat Abnormal BTS3900, BTS3900

MRO
atioThd HO Ratio Threshold LTE

InterFreqA2RollBac Inter Frequency A2 BTS3900, BTS3900

MRO
kPeriod Rollback Period LTE
 IntraRat HO Too
IntraRatHoTooEarly BTS3900, BTS3900
MRO Early Time
TimeThd LTE
Threshold
 InterRatAbnormalH InterRat Abnormal BTS3900, BTS3900
MRO
oRatioThd HO Ratio Threshold LTE
 InterRat
InterRatMeasTooLa Measurement Too BTS3900, BTS3900
MRO
teHoThd Late Ratio LTE
Threshold
 Unnecessary
UnnecInterRatHoR BTS3900, BTS3900
MRO InterRat HO Ratio
atioThd LTE
Threshold
 Unnecessary
UnnecInterRatHoM BTS3900, BTS3900
MRO InterRat HO
easTime LTE
Measurement Time

BTS3900, BTS3900
SimuLoad SimuLoadCfgIndex configuration index
LTE

BTS3900, BTS3900
SimuLoad SimuLoadRbThd RB usage threshold
LTE

Power usage BTS3900, BTS3900

SimuLoad SimuLoadPwrThd
threshold LTE

SimuLoadReportPe BTS3900, BTS3900

SimuLoad Report period
riod LTE

SimuLoadStatPerio BTS3900, BTS3900

SimuLoad Statistic period
d LTE
 Frequency selective BTS3900, BTS3900
SimuLoad FreqSelSwitch
switch LTE

TCP ACK Control BTS3900, BTS3900

TcpAckCtrlAlgo AckCtrlSwitch
Switch LTE

BTS3900, BTS3900
TcpAckCtrlAlgo DlMaxThroughput DL Max Throughput
LTE
 Control Timer BTS3900, BTS3900
TcpAckCtrlAlgo CtrlTimerLength
Length LTE

TCP MSS Control BTS3900, BTS3900

TcpMssCtrl TcpMssCtrlSwitch
Switch LTE

TCP MSS BTS3900, BTS3900

TcpMssCtrl TcpMssThd
Threshold LTE
 BTS3900, BTS3900
TddFrameOffset TimeOffset TDD time offset
LTE

Clock-Unavailable
ClkResExcludeSwit BTS3900, BTS3900
TddResModeSwitch Cell Activation
ch LTE
Switch
 Baseband
BbResExclusiveSwi BTS3900, BTS3900
TddResModeSwitch Equipment
tch LTE
Exclusive Switch

BTS3900, BTS3900
TpeAlgo PortListNum TCP Port Number
LTE

BTS3900, BTS3900
TpeAlgo Port1 TCP Port 1
LTE

BTS3900, BTS3900
TpeAlgo Port2 TCP Port 2
LTE

BTS3900, BTS3900
TpeAlgo Port3 TCP Port 3
LTE

BTS3900, BTS3900
TpeAlgo Port4 TCP Port 4
LTE

BTS3900, BTS3900
TpeAlgo Port5 TCP Port 5
LTE

BTS3900, BTS3900
TpeAlgo Port6 TCP Port 6
LTE
 BTS3900, BTS3900
TpeAlgo Port7 TCP Port 7
LTE

BTS3900, BTS3900
TpeAlgo Port8 TCP Port 8
LTE

BTS3900, BTS3900
TpeAlgo Port9 TCP Port 9
LTE

BTS3900, BTS3900
TpeAlgo Port10 TCP Port 10
LTE

BTS3900, BTS3900
TpeAlgo Port11 TCP Port 11
LTE

BTS3900, BTS3900
TpeAlgo Port12 TCP Port 12
LTE

BTS3900, BTS3900
TpeAlgo Port13 TCP Port 13
LTE

BTS3900, BTS3900
TpeAlgo Port14 TCP Port 14
LTE

BTS3900, BTS3900
TpeAlgo Port15 TCP Port 15
LTE

BTS3900, BTS3900
TpeAlgo Port16 TCP Port 16
LTE

BTS3900, BTS3900
TpeAlgo Port17 TCP Port 17
LTE

BTS3900, BTS3900
TpeAlgo Port18 TCP Port 18
LTE

BTS3900, BTS3900
TpeAlgo Port19 TCP Port 19
LTE
 BTS3900, BTS3900
TpeAlgo Port20 TCP Port 20
LTE

BTS3900, BTS3900
VQMAlgo ULDelayJitter UL Delay Jitter
LTE

VQI Good BTS3900, BTS3900

VQMAlgo VqiGoodThd
Threshold LTE

BTS3900, BTS3900
VQMAlgo VqiPoorThd VQI Poor Threshold
LTE

BTS3900, BTS3900
VQMAlgo VqiBadThd VQI Bad Threshold
LTE
 Release Threshold
AmrWbRadioLowQ of Radio Low BTS3900, BTS3900
VQMAlgo
ualRelThd Quality for Amr LTE
Wideband
 Release Threshold
AmrNbRadioLowQu of Radio Low BTS3900, BTS3900
VQMAlgo
alRelThd Quality for Amr LTE
Narrowband
 AmrSilentPeriodNu Period Number of BTS3900, BTS3900
VQMAlgo
m Silent for Amr LTE
 Period Number of
AmrLowQualRelPer BTS3900, BTS3900
VQMAlgo Low Quality
iodNum LTE
Release for Amr

VQI Excellent BTS3900, BTS3900

VQMAlgo VqiExcellentThd
Threshold LTE
 Threshold of Silent BTS3900, BTS3900
VQMAlgo AmrNbSilentThd
for Amr Narrowband LTE
 Release Threshold
AmrWbRcvLowQua of Receive Low BTS3900, BTS3900
VQMAlgo
lRelThd Quality for Amr LTE
Wideband
 Release Threshold
AmrNbRcvLowQual of Receive Low BTS3900, BTS3900
VQMAlgo
RelThd Quality for Amr LTE
Narrowband
 Threshold of Silent BTS3900, BTS3900
VQMAlgo AmrWbSilentThd
for Amr Wideband LTE

BTS3900, BTS3900
eNBLicenseAlmThd OPRD OPRD
LTE

BTS3900, BTS3900
eNBLicenseAlmThd OTHD OTHD
LTE

BTS3900, BTS3900
eNBLicenseAlmThd RPRD RPRD
LTE

BTS3900, BTS3900
eNBLicenseAlmThd RTHD RTHD
LTE
 Reserved Switch BTS3900, BTS3900
eNBRsvdPara RsvdSwPara0
Parameter 0 LTE
 Reserved Switch BTS3900, BTS3900
eNBRsvdPara RsvdSwPara1
Parameter 1 LTE
 Reserved Switch BTS3900, BTS3900
eNBRsvdPara RsvdSwPara2
Parameter 2 LTE
 Reserved Switch BTS3900, BTS3900
eNBRsvdPara RsvdSwPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara2
Parameter 2 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara3
Parameter 3 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara4
Parameter 4 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara5
Parameter 5 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara6
Parameter 6 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara7
Parameter 7 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara8
Parameter 8 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara9
Parameter 9 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara10
Parameter 10 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara11
Parameter 11 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara12
Parameter 12 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara13
Parameter 13 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara14
Parameter 14 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara15
Parameter 15 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara16
Parameter 16 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara17
Parameter 17 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara18
Parameter 18 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara19
Parameter 19 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara20
Parameter 20 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara21
Parameter 21 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara22
Parameter 22 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara23
Parameter 23 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara24
Parameter 24 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara25
Parameter 25 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara26
Parameter 26 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara27
Parameter 27 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara28
Parameter 28 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara29
Parameter 29 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara30
Parameter 30 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara31
Parameter 31 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara32
Parameter 32 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara33
Parameter 33 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara34
Parameter 34 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara35
Parameter 35 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara36
Parameter 36 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara37
Parameter 37 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara38
Parameter 38 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara39
Parameter 39 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara40
Parameter 40 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara41
Parameter 41 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara42
Parameter 42 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara43
Parameter 43 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara44
Parameter 44 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara45
Parameter 45 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara46
Parameter 46 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara47
Parameter 47 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara48
Parameter 48 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara49
Parameter 49 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara50
Parameter 50 LTE
 Reserved BTS3900, BTS3900
eNBRsvdPara RsvdPara51
Parameter 51 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara52
Parameter 52 LTE

Reserved BTS3900, BTS3900

eNBRsvdPara RsvdPara53
Parameter 53 LTE

eNodeBAutoPower AutoPowerOffSwitc RF module sleep BTS3900, BTS3900

Off h switch LTE

eNodeBAutoPower RF module sleep BTS3900, BTS3900

PowerOffTime
Off start time LTE
eNodeBAutoPower RF module sleep BTS3900, BTS3900
PowerOnTime
Off stop time LTE

eNodeBAutoPower RF module sleep BTS3900, BTS3900

AutoPoweroffStatus
Off status LTE
 Adaptive
eNodeBFlowCtrlPar AdaptUnsyncTimer BTS3900, BTS3900
Unsynchronized
a Len LTE
Timer Length
 Adaptive
eNodeBFlowCtrlPar AdaptUnsyncUserN Unsynchronized BTS3900, BTS3900
a umThd User Num LTE
Threshold
eNodeBFlowCtrlPar DynAcBarPolicyMo Dynamic AC BTS3900, BTS3900
a de Barring Policy Mode LTE

eNodeBFlowCtrlPar CPU Load BTS3900, BTS3900

CpuLoadThd
a Threshold LTE
 MML Command

ADD CNOPERATOREXTENDEDQCI
LST CNOPERATOREXTENDEDQCI
MOD CNOPERATOREXTENDEDQCI
RMV CNOPERATOREXTENDEDQCI
ADD CNOPERATOREXTENDEDQCI
LST CNOPERATOREXTENDEDQCI
MOD CNOPERATOREXTENDEDQCI
RMV CNOPERATOREXTENDEDQCI

ADD CNOPERATOREXTENDEDQCI
MOD CNOPERATOREXTENDEDQCI
LST CNOPERATOREXTENDEDQCI

ADD CNOPERATOREXTENDEDQCI
MOD CNOPERATOREXTENDEDQCI
LST CNOPERATOREXTENDEDQCI

LST CNOPERATORHOCFG
MOD CNOPERATORHOCFG

MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG
MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG

MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG

MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG
MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG

MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG

MOD CNOPERATORHOCFG
LST CNOPERATORHOCFG

ADD CNOPERATORSPIDCFG
LST CNOPERATORSPIDCFG
MOD CNOPERATORSPIDCFG
RMV CNOPERATORSPIDCFG
ADD CNOPERATORSPIDCFG
LST CNOPERATORSPIDCFG
MOD CNOPERATORSPIDCFG
RMV CNOPERATORSPIDCFG

ADD CNOPERATORSPIDCFG
MOD CNOPERATORSPIDCFG
LST CNOPERATORSPIDCFG

ADD CNOPERATORSPIDCFG
MOD CNOPERATORSPIDCFG
LST CNOPERATORSPIDCFG

LST CNOPERATORSTANDARDQCI
MOD CNOPERATORSTANDARDQCI

LST CNOPERATORSTANDARDQCI
MOD CNOPERATORSTANDARDQCI
MOD CNOPERATORSTANDARDQCI
LST CNOPERATORSTANDARDQCI

MOD CNOPERATORSTANDARDQCI
LST CNOPERATORSTANDARDQCI

MOD CNOPERATORSTANDARDQCI
LST CNOPERATORSTANDARDQCI

LST CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG
MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKBLINDHOCFG
LST CSFALLBACKBLINDHOCFG

MOD CSFALLBACKPOLICYCFG
LST CSFALLBACKPOLICYCFG

MOD CSFALLBACKPOLICYCFG
LST CSFALLBACKPOLICYCFG
MOD CSFALLBACKPOLICYCFG
LST CSFALLBACKPOLICYCFG

MOD CSFALLBACKPOLICYCFG
LST CSFALLBACKPOLICYCFG

ADD EUTRANVOIPHOBLKLIST
LST EUTRANVOIPHOBLKLIST
RMV EUTRANVOIPHOBLKLIST
ADD EUTRANVOIPHOBLKLIST
LST EUTRANVOIPHOBLKLIST
RMV EUTRANVOIPHOBLKLIST

ADD EUTRANVOIPHOBLKLIST
LST EUTRANVOIPHOBLKLIST
RMV EUTRANVOIPHOBLKLIST

ADD INTERPLMNHOLIST
LST INTERPLMNHOLIST
RMV INTERPLMNHOLIST

ADD INTERPLMNHOLIST
LST INTERPLMNHOLIST
RMV INTERPLMNHOLIST
ADD INTERPLMNHOLIST
LST INTERPLMNHOLIST
RMV INTERPLMNHOLIST

ADD RATFREQPRIORITYGROUP
LST RATFREQPRIORITYGROUP
MOD RATFREQPRIORITYGROUP
RMV RATFREQPRIORITYGROUP

ADD RATFREQPRIORITYGROUP
LST RATFREQPRIORITYGROUP
MOD RATFREQPRIORITYGROUP
RMV RATFREQPRIORITYGROUP

ADD RATFREQPRIORITYGROUP
LST RATFREQPRIORITYGROUP
MOD RATFREQPRIORITYGROUP
RMV RATFREQPRIORITYGROUP

ADD RATFREQPRIORITYGROUP
MOD RATFREQPRIORITYGROUP
LST RATFREQPRIORITYGROUP

ADD RATFREQPRIORITYGROUP
MOD RATFREQPRIORITYGROUP
LST RATFREQPRIORITYGROUP
ADD SERVICEIFDLEARFCNGRP
LST SERVICEIFDLEARFCNGRP
MOD SERVICEIFDLEARFCNGRP
RMV SERVICEIFDLEARFCNGRP

ADD SERVICEIFDLEARFCNGRP
LST SERVICEIFDLEARFCNGRP
MOD SERVICEIFDLEARFCNGRP
RMV SERVICEIFDLEARFCNGRP

ADD SERVICEIFDLEARFCNGRP
LST SERVICEIFDLEARFCNGRP
MOD SERVICEIFDLEARFCNGRP
RMV SERVICEIFDLEARFCNGRP

ADD SERVICEIFDLEARFCNGRP
MOD SERVICEIFDLEARFCNGRP
LST SERVICEIFDLEARFCNGRP

ADD SERVICEIFDLEARFCNGRP
MOD SERVICEIFDLEARFCNGRP
LST SERVICEIFDLEARFCNGRP

ADD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
RMV SERVICEIFHOCFGGROUP
ADD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
RMV SERVICEIFHOCFGGROUP
ADD SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP

ADD SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP

ADD SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP
ADD SERVICEIFHOCFGGROUP
MOD SERVICEIFHOCFGGROUP
LST SERVICEIFHOCFGGROUP

ADD SERVICEIRHOCFGGROUP
LST SERVICEIRHOCFGGROUP
MOD SERVICEIRHOCFGGROUP
RMV SERVICEIRHOCFGGROUP

ADD SERVICEIRHOCFGGROUP
LST SERVICEIRHOCFGGROUP
MOD SERVICEIRHOCFGGROUP
RMV SERVICEIRHOCFGGROUP

ADD SERVICEIRHOCFGGROUP
MOD SERVICEIRHOCFGGROUP
LST SERVICEIRHOCFGGROUP
ADD SERVICEIRHOCFGGROUP
MOD SERVICEIRHOCFGGROUP
LST SERVICEIRHOCFGGROUP

ADD SPIDCFG
LST SPIDCFG
MOD SPIDCFG
RMV SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG
ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDCFG
MOD SPIDCFG
LST SPIDCFG

ADD SPIDHPLMNLIST
LST SPIDHPLMNLIST
RMV SPIDHPLMNLIST

ADD SPIDHPLMNLIST
LST SPIDHPLMNLIST
RMV SPIDHPLMNLIST

ADD SPIDHPLMNLIST
LST SPIDHPLMNLIST
RMV SPIDHPLMNLIST

ADD SPIDHPLMNLIST
LST SPIDHPLMNLIST
RMV SPIDHPLMNLIST

ADD UTRANNETWORKCAPCFG
LST UTRANNETWORKCAPCFG
MOD UTRANNETWORKCAPCFG
RMV UTRANNETWORKCAPCFG

ADD UTRANNETWORKCAPCFG
LST UTRANNETWORKCAPCFG
MOD UTRANNETWORKCAPCFG
RMV UTRANNETWORKCAPCFG
ADD UTRANNETWORKCAPCFG
LST UTRANNETWORKCAPCFG
MOD UTRANNETWORKCAPCFG
RMV UTRANNETWORKCAPCFG

ADD UTRANNETWORKCAPCFG
MOD UTRANNETWORKCAPCFG
LST UTRANNETWORKCAPCFG

LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA

LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA
MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA

MOD ENBCNOPQCIRSVDPARA
LST ENBCNOPQCIRSVDPARA
ADD ENODEBFUNCTION
MOD ENODEBFUNCTION
RMV ENODEBFUNCTION
LST ENODEBFUNCTION

ADD ENODEBFUNCTION
LST ENODEBFUNCTION

ADD ENODEBFUNCTION
MOD ENODEBFUNCTION
LST ENODEBFUNCTION

ADD ENODEBFUNCTION
MOD ENODEBFUNCTION
LST ENODEBFUNCTION

LST ENODEBFUNCTION

LST ENODEBFUNCTION
ADD EUAPN
LST EUAPN
MOD EUAPN
RMV EUAPN

ADD EUAPN
MOD EUAPN
LST EUAPN

ADD EUAPN
MOD EUAPN
LST EUAPN

ADD EUAPN
MOD EUAPN
LST EUAPN

ADD EUAPNTEMPLATE
LST EUAPNTEMPLATE
MOD EUAPNTEMPLATE
RMV EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUAPNTEMPLATE
MOD EUAPNTEMPLATE
LST EUAPNTEMPLATE

ADD EUEPCINFO
LST EUEPCINFO
MOD EUEPCINFO
RMV EUEPCINFO
ADD EUEPCINFO
MOD EUEPCINFO
LST EUEPCINFO

ADD EUEPCINFO
MOD EUEPCINFO
LST EUEPCINFO

ADD EUEPCINFO
MOD EUEPCINFO
LST EUEPCINFO

ADD EUEPCINFO
MOD EUEPCINFO
LST EUEPCINFO

MOD EUEPCSEC
LST EUEPCSEC

MOD EUEPCSEC
LST EUEPCSEC

ADD EUIPADDRESSPOOL
LST EUIPADDRESSPOOL
MOD EUIPADDRESSPOOL
RMV EUIPADDRESSPOOL

ADD EUIPADDRESSPOOL
MOD EUIPADDRESSPOOL
LST EUIPADDRESSPOOL

ADD EUIPADDRESSPOOL
MOD EUIPADDRESSPOOL
LST EUIPADDRESSPOOL

ADD EUIPADDRESSPOOL
MOD EUIPADDRESSPOOL
LST EUIPADDRESSPOOL

ACT EURRNSOFTWARE
ADD EURRN
DLD EURRNSOFTWARE
DSP EURRNSOFTWARE
LST EURRN
MOD EURRN
RMV EURRN
RST EURRN
RST EURRNPWD
ULD EURRNFILE

ADD EURRN
MOD EURRN
LST EURRN
DSP EURRNSOFTWARE

ADD EURRN
MOD EURRN
LST EURRN

DLD EURRNSOFTWARE
ULD EURRNFILE

ADD EURRN
MOD EURRN
LST EURRN

DLD EURRNSOFTWARE
ULD EURRNFILE

DLD EURRNSOFTWARE
ULD EURRNFILE

DLD EURRNSOFTWARE
ULD EURRNFILE

RST EURRN

DSP EURRNSOFTWARE

DSP EURRNSOFTWARE

ACT EURRNSOFTWARE
DLD EURRNSOFTWARE
DSP EURRNSOFTWARE

DLD EURRNSOFTWARE
ULD EURRNFILE
ADD EURRN
MOD EURRN
LST EURRN

ULD EURRNFILE

ADD EURRNLANIP
LST EURRNLANIP
RMV EURRNLANIP

ADD EURRNLANIP
LST EURRNLANIP
RMV EURRNLANIP

ADD EURRNLANIP
LST EURRNLANIP

LST EURRNPORT
MOD EURRNPORT

LST EURRNPORT
MOD EURRNPORT

MOD EURRNPORT
LST EURRNPORT

ADD EURRNRT
LST EURRNRT
MOD EURRNRT
RMV EURRNRT

ADD EURRNRT
MOD EURRNRT
LST EURRNRT

ADD EURRNRT
MOD EURRNRT
LST EURRNRT
ADD EURRNRT
MOD EURRNRT
LST EURRNRT

ADD EURRNRT
MOD EURRNRT
LST EURRNRT

ADD EUSUBSCRIBER
DEA EUSUBSCRIBER
LST EUSUBSCRIBER
MOD EUSUBSCRIBER
RMV EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER
ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBER
MOD EUSUBSCRIBER
LST EUSUBSCRIBER

ADD EUSUBSCRIBERTEMPLATE
LST EUSUBSCRIBERTEMPLATE
MOD EUSUBSCRIBERTEMPLATE
RMV EUSUBSCRIBERTEMPLATE

ADD EUSUBSCRIBERTEMPLATE
MOD EUSUBSCRIBERTEMPLATE
LST EUSUBSCRIBERTEMPLATE

ADD EUSUBSCRIBERTEMPLATE
MOD EUSUBSCRIBERTEMPLATE
LST EUSUBSCRIBERTEMPLATE

ADD EUSUBSCRIBERTEMPLATE
MOD EUSUBSCRIBERTEMPLATE
LST EUSUBSCRIBERTEMPLATE

ADD EUSUBSCRIBERTEMPLATE
MOD EUSUBSCRIBERTEMPLATE
LST EUSUBSCRIBERTEMPLATE

ADD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
RMV RELAYEXTENDEDQCI

ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI

ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI
ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI
ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI

ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI
ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI

ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI

ADD RELAYEXTENDEDQCI
MOD RELAYEXTENDEDQCI
LST RELAYEXTENDEDQCI
MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM
MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM

MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM
MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM
MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM
MOD ANRMEASUREPARAM
LST ANRMEASUREPARAM

MOD COUNTERCHECKPARA
LST COUNTERCHECKPARA
MOD COUNTERCHECKPARA
LST COUNTERCHECKPARA

MOD COUNTERCHECKPARA
LST COUNTERCHECKPARA

MOD ENODEBCIPHERCAP
LST ENODEBCIPHERCAP
MOD ENODEBCIPHERCAP
LST ENODEBCIPHERCAP

MOD ENODEBCIPHERCAP
LST ENODEBCIPHERCAP

MOD ENODEBCIPHERCAP
LST ENODEBCIPHERCAP
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER
MOD ENODEBCONNSTATETIMER
LST ENODEBCONNSTATETIMER

MOD ENODEBINTEGRITYCAP
LST ENODEBINTEGRITYCAP

MOD ENODEBINTEGRITYCAP
LST ENODEBINTEGRITYCAP
MOD ENODEBINTEGRITYCAP
LST ENODEBINTEGRITYCAP

MOD ENODEBINTEGRITYCAP
LST ENODEBINTEGRITYCAP

ADD ENODEBUSIMEISVCFG
LST ENODEBUSIMEISVCFG
MOD ENODEBUSIMEISVCFG
RMV ENODEBUSIMEISVCFG
ADD ENODEBUSIMEISVCFG
LST ENODEBUSIMEISVCFG
MOD ENODEBUSIMEISVCFG
RMV ENODEBUSIMEISVCFG
ADD ENODEBUSIMEISVCFG
MOD ENODEBUSIMEISVCFG
LST ENODEBUSIMEISVCFG

MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG

MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG
MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG

MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG
MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG

MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG

MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG
MOD ENODEBUSPARACFG
LST ENODEBUSPARACFG

ADD ENODEBUSTRACEIDCFG
LST ENODEBUSTRACEIDCFG
MOD ENODEBUSTRACEIDCFG
RMV ENODEBUSTRACEIDCFG

ADD ENODEBUSTRACEIDCFG
MOD ENODEBUSTRACEIDCFG
LST ENODEBUSTRACEIDCFG

MOD PDCPROHCPARA
LST PDCPROHCPARA

MOD PDCPROHCPARA
LST PDCPROHCPARA
MOD PDCPROHCPARA
LST PDCPROHCPARA

ADD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
RMV PRIVATECABANDCOMB
ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB

ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB

ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB

ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB

ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB

ADD PRIVATECABANDCOMB
MOD PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB
LST PRIVATECABANDCOMB
DSP PRIVATECABANDCOMB

MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER

MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER

MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER

MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD RRCCONNSTATETIMER
LST RRCCONNSTATETIMER
MOD SRBCFG
LST SRBCFG

MOD SRBCFG
LST SRBCFG
MOD SRBCFG
LST SRBCFG
MOD SRBCFG
LST SRBCFG

ADD TCEIPMAPPING
LST TCEIPMAPPING
MOD TCEIPMAPPING
RMV TCEIPMAPPING

ADD TCEIPMAPPING
MOD TCEIPMAPPING
LST TCEIPMAPPING

ADD TCEIPMAPPING
MOD TCEIPMAPPING
LST TCEIPMAPPING
ADD TCEIPMAPPING
MOD TCEIPMAPPING
LST TCEIPMAPPING

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY
MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

MOD USERPRIORITY
LST USERPRIORITY

LST USERQCIPRIORITY
MOD USERQCIPRIORITY

MOD USERQCIPRIORITY
LST USERQCIPRIORITY
MOD USERQCIPRIORITY
LST USERQCIPRIORITY

MOD USERQCIPRIORITY
LST USERQCIPRIORITY

MOD USERQCIPRIORITY
LST USERQCIPRIORITY

MOD USERQCIPRIORITY
LST USERQCIPRIORITY
MOD USERQCIPRIORITY
LST USERQCIPRIORITY

ADD X2AUTOSETUPOPERATOR
RMV X2AUTOSETUPOPERATOR
LST X2AUTOSETUPOPERATOR

ADD X2AUTOSETUPOPERATOR
RMV X2AUTOSETUPOPERATOR
LST X2AUTOSETUPOPERATOR

LST CAMGTCFG
MOD CAMGTCFG

MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG

MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG

MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG

MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG

MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG
MOD CAMGTCFG
LST CAMGTCFG

LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG

MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG

MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG
MOD CELLBFMIMOPARACFG
LST CELLBFMIMOPARACFG

LST CELLCQIADAPTIVECFG
MOD CELLCQIADAPTIVECFG
MOD CELLCQIADAPTIVECFG
LST CELLCQIADAPTIVECFG

MOD CELLCQIADAPTIVECFG
LST CELLCQIADAPTIVECFG
MOD CELLCQIADAPTIVECFG
LST CELLCQIADAPTIVECFG

MOD CELLCQIADAPTIVECFG
LST CELLCQIADAPTIVECFG

LST CELLDLCOMPALGO
MOD CELLDLCOMPALGO
MOD CELLDLCOMPALGO
LST CELLDLCOMPALGO

LST CELLDLPCPDSCHPA
MOD CELLDLPCPDSCHPA

MOD CELLDLPCPDSCHPA
LST CELLDLPCPDSCHPA
MOD CELLDLPCPDSCHPA
LST CELLDLPCPDSCHPA

LST CELLDRXPARA
MOD CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA
MOD CELLDRXPARA
LST CELLDRXPARA

MOD CELLDRXPARA
LST CELLDRXPARA

LST CELLHOPARACFG
MOD CELLHOPARACFG
MOD CELLHOPARACFG
LST CELLHOPARACFG
MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG
MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG
MOD CELLHOPARACFG
LST CELLHOPARACFG

MOD CELLHOPARACFG
LST CELLHOPARACFG

LST CELLMIMOPARACFG
MOD CELLMIMOPARACFG
MOD CELLMIMOPARACFG
LST CELLMIMOPARACFG
MOD CELLMIMOPARACFG
LST CELLMIMOPARACFG
MOD CELLMIMOPARACFG
LST CELLMIMOPARACFG

LST CELLMLBHO
MOD CELLMLBHO
MOD CELLMLBHO
LST CELLMLBHO
MOD CELLMLBHO
LST CELLMLBHO
MOD CELLMLBHO
LST CELLMLBHO

MOD CELLMLBHO
LST CELLMLBHO
MOD CELLMLBHO
LST CELLMLBHO

MOD CELLMLBHO
LST CELLMLBHO
MOD CELLMLBHO
LST CELLMLBHO

MOD CELLMLBHO
LST CELLMLBHO

ADD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
RMV CELLPREALLOCGROUP
ADD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
RMV CELLPREALLOCGROUP
ADD CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP

ADD CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP

ADD CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP

ADD CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP
ADD CELLPREALLOCGROUP
MOD CELLPREALLOCGROUP
LST CELLPREALLOCGROUP

LST CELLSRSADAPTIVECFG
MOD CELLSRSADAPTIVECFG

MOD CELLSRSADAPTIVECFG
LST CELLSRSADAPTIVECFG
MOD CELLSRSADAPTIVECFG
LST CELLSRSADAPTIVECFG

LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG
MOD CELLUEMEASCONTROLCFG
LST CELLUEMEASCONTROLCFG

LST CELLULCOMPALGO
MOD CELLULCOMPALGO
MOD CELLULCOMPALGO
LST CELLULCOMPALGO

MOD CELLULCOMPALGO
LST CELLULCOMPALGO
MOD CELLULCOMPALGO
LST CELLULCOMPALGO

LST CELLULPCDEDIC
MOD CELLULPCDEDIC

MOD CELLULPCDEDIC
LST CELLULPCDEDIC
MOD CELLULPCDEDIC
LST CELLULPCDEDIC

MOD CELLULPCDEDIC
LST CELLULPCDEDIC
MOD CELLULPCDEDIC
LST CELLULPCDEDIC

LST DISTBASEDHO
MOD DISTBASEDHO

MOD DISTBASEDHO
LST DISTBASEDHO
MOD DISTBASEDHO
LST DISTBASEDHO

ADD DRXPARAGROUP
LST DRXPARAGROUP
MOD DRXPARAGROUP
RMV DRXPARAGROUP
ADD DRXPARAGROUP
LST DRXPARAGROUP
MOD DRXPARAGROUP
RMV DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP

ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP
ADD DRXPARAGROUP
MOD DRXPARAGROUP
LST DRXPARAGROUP

ADD GERANINTERFARFCN
LST GERANINTERFARFCN
MOD GERANINTERFARFCN
RMV GERANINTERFARFCN
ADD GERANINTERFARFCN
LST GERANINTERFARFCN
MOD GERANINTERFARFCN
RMV GERANINTERFARFCN

ADD GERANINTERFARFCN
MOD GERANINTERFARFCN
LST GERANINTERFARFCN

ADD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
RMV INTERRATHOCOMMGROUP
ADD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
RMV INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP

ADD INTERRATHOCOMMGROUP
MOD INTERRATHOCOMMGROUP
LST INTERRATHOCOMMGROUP
ADD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
RMV
INTERRATHOCDMA1XRTTGROUP

ADD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
RMV
INTERRATHOCDMA1XRTTGROUP

ADD
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP
ADD
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP

ADD
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP

ADD
INTERRATHOCDMA1XRTTGROUP
MOD
INTERRATHOCDMA1XRTTGROUP
LST
INTERRATHOCDMA1XRTTGROUP

ADD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
RMV RLFTIMERCONSTGROUP
ADD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
RMV RLFTIMERCONSTGROUP
ADD RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP

ADD RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP
ADD RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP

ADD RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP

ADD RLFTIMERCONSTGROUP
MOD RLFTIMERCONSTGROUP
LST RLFTIMERCONSTGROUP

ADD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
RMV CELLEXTENDEDQCI
ADD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
RMV CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI
ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI
ADD CELLEXTENDEDQCI
MOD CELLEXTENDEDQCI
LST CELLEXTENDEDQCI

LST CELLSTANDARDQCI
MOD CELLSTANDARDQCI

LST CELLSTANDARDQCI
MOD CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI
MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI
MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI
MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

MOD CELLSTANDARDQCI
LST CELLSTANDARDQCI

ADD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
RMV
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
RMV
INTERRATHOCDMAHRPDGROUP
ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP
ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP

ADD
INTERRATHOCDMAHRPDGROUP
MOD
INTERRATHOCDMAHRPDGROUP
LST
INTERRATHOCDMAHRPDGROUP
ADD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
RMV INTERRATHOGERANGROUP

ADD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
RMV INTERRATHOGERANGROUP

ADD INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP

ADD INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP
ADD INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP

ADD INTERRATHOGERANGROUP
MOD INTERRATHOGERANGROUP
LST INTERRATHOGERANGROUP

ADD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
RMV INTERRATHOUTRANGROUP
ADD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
RMV INTERRATHOUTRANGROUP

ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP
ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP

ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP

ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP
ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP

ADD INTERRATHOUTRANGROUP
MOD INTERRATHOUTRANGROUP
LST INTERRATHOUTRANGROUP
ADD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
RMV CAGROUPSCELLCFG

ADD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
RMV CAGROUPSCELLCFG
ADD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
RMV CAGROUPSCELLCFG

ADD CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG
ADD CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG

ADD CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG
ADD CAGROUPSCELLCFG
MOD CAGROUPSCELLCFG
LST CAGROUPSCELLCFG

LST CELLMCPARA
MOD CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA
MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA
MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA
MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA
MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA
MOD CELLMCPARA
LST CELLMCPARA

MOD CELLMCPARA
LST CELLMCPARA

ADD INTERFREQHOGROUP
LST INTERFREQHOGROUP
MOD INTERFREQHOGROUP
RMV INTERFREQHOGROUP
ADD INTERFREQHOGROUP
LST INTERFREQHOGROUP
MOD INTERFREQHOGROUP
RMV INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP
ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTERFREQHOGROUP
MOD INTERFREQHOGROUP
LST INTERFREQHOGROUP

ADD INTRAFREQHOGROUP
LST INTRAFREQHOGROUP
MOD INTRAFREQHOGROUP
RMV INTRAFREQHOGROUP
ADD INTRAFREQHOGROUP
LST INTRAFREQHOGROUP
MOD INTRAFREQHOGROUP
RMV INTRAFREQHOGROUP
ADD INTRAFREQHOGROUP
MOD INTRAFREQHOGROUP
LST INTRAFREQHOGROUP

ADD INTRAFREQHOGROUP
MOD INTRAFREQHOGROUP
LST INTRAFREQHOGROUP

ADD INTRAFREQHOGROUP
MOD INTRAFREQHOGROUP
LST INTRAFREQHOGROUP
LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA

LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA
MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

MOD ENBCELLQCIRSVDPARA
LST ENBCELLQCIRSVDPARA

ADD CNOPERATOR
LST CNOPERATOR
MOD CNOPERATOR
RMV CNOPERATOR
ADD CNOPERATOR
MOD CNOPERATOR
LST CNOPERATOR

ADD CNOPERATOR
MOD CNOPERATOR
LST CNOPERATOR

ADD CNOPERATOR
MOD CNOPERATOR
LST CNOPERATOR

ADD CNOPERATOR
MOD CNOPERATOR
LST CNOPERATOR

ADD CNOPERATORIPPATH
LST CNOPERATORIPPATH
MOD CNOPERATORIPPATH
RMV CNOPERATORIPPATH

ADD CNOPERATORIPPATH
MOD CNOPERATORIPPATH
LST CNOPERATORIPPATH

ADD CNOPERATORTA
LST CNOPERATORTA
MOD CNOPERATORTA
RMV CNOPERATORTA
ADD CNOPERATORTA
MOD CNOPERATORTA
LST CNOPERATORTA

ADD CNOPERATORTA
MOD CNOPERATORTA
LST CNOPERATORTA

ADD CNOPSHARINGGROUP
ADD SECONDARYOP2GROUP
LST CNOPSHARINGGROUP
LST SECONDARYOP2GROUP
MOD CNOPSHARINGGROUP
RMV CNOPSHARINGGROUP
RMV SECONDARYOP2GROUP

ADD CNOPSHARINGGROUP
MOD CNOPSHARINGGROUP
LST CNOPSHARINGGROUP

LST CNOPSHARINGGROUP
ADD SECONDARYOP2GROUP
LST SECONDARYOP2GROUP
RMV SECONDARYOP2GROUP

ADD SECONDARYOP2GROUP
RMV SECONDARYOP2GROUP
LST SECONDARYOP2GROUP
LST EMC
MOD EMC

MOD EMC
LST EMC
MOD EMC
LST EMC
MOD EMC
LST EMC
MOD EMC
LST EMC

MOD ENODEBCHROUTPUTCTRL
LST ENODEBCHROUTPUTCTRL

MOD ENODEBCHROUTPUTCTRL
LST ENODEBCHROUTPUTCTRL
MOD ENODEBCHROUTPUTCTRL
LST ENODEBCHROUTPUTCTRL

MOD ENODEBCHROUTPUTCTRL
LST ENODEBCHROUTPUTCTRL

MOD ENODEBSHARINGMODE
LST ENODEBSHARINGMODE

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH
MOD GLOBALPROCSWITCH
LST GLOBALPROCSWITCH

ADD LICENSESHARINGPOLICY
LST LICENSESHARINGPOLICY
MOD LICENSESHARINGPOLICY
RMV LICENSESHARINGPOLICY

ADD LICENSESHARINGPOLICY
MOD LICENSESHARINGPOLICY
LST LICENSESHARINGPOLICY

ADD LICENSESHARINGPOLICY
MOD LICENSESHARINGPOLICY
LST LICENSESHARINGPOLICY

DSP MBMSPARA
MOD MBMSPARA
DSP MBMSPARA
LST MBMSPARA

DSP MBMSPARA

DSP MBMSPARA

MOD MBMSPARA
LST MBMSPARA

ADD MLBQCIGROUP
LST MLBQCIGROUP
MOD MLBQCIGROUP
RMV MLBQCIGROUP

ADD MLBQCIGROUP
MOD MLBQCIGROUP
LST MLBQCIGROUP
ADD MLBQCIGROUP
MOD MLBQCIGROUP
LST MLBQCIGROUP

MOD S1REESTTIMER
LST S1REESTTIMER

MOD S1REESTTIMER
LST S1REESTTIMER

LST ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA
MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

MOD ENBCNOPRSVDPARA
LST ENBCNOPRSVDPARA

ADD CHROUTPUTMODE
LST CHROUTPUTMODE
MOD CHROUTPUTMODE
RMV CHROUTPUTMODE

ADD CHROUTPUTMODE
MOD CHROUTPUTMODE
LST CHROUTPUTMODE
ADD CHROUTPUTMODE
MOD CHROUTPUTMODE
LST CHROUTPUTMODE

ADD CHROUTPUTMODE
MOD CHROUTPUTMODE
LST CHROUTPUTMODE

ADD ECO
DSP ECO
LST ECO
MOD ECO
RMV ECO

ADD ECO
MOD ECO
LST ECO

ADD ECO
MOD ECO
LST ECO

ADD ECO
MOD ECO
LST ECO

ADD ECO
MOD ECO
LST ECO

DSP ECO

DSP ECO

ADD ENODEBPATH
LST ENODEBPATH
MOD ENODEBPATH
RMV ENODEBPATH
ADD ENODEBPATH
MOD ENODEBPATH
LST ENODEBPATH

ADD ENODEBPATH
MOD ENODEBPATH
LST ENODEBPATH

ADD ENODEBPATH
MOD ENODEBPATH
LST ENODEBPATH

ADD M1
LST M1
MOD M1
RMV M1

ADD M1
MOD M1
LST M1

ADD M1
MOD M1
LST M1

ADD M2
DSP M2
LST M2
MOD M2
RMV M2
RST M2

ADD M2
MOD M2
LST M2
ADD M2
MOD M2
LST M2

DSP M2

DSP M2

DSP M2

DSP M2

DSP M2

DSP M2

DSP M2

DSP M2

ADD S1
DSP S1
LST S1
MOD S1
RMV S1
ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1
ADD S1
MOD S1
LST S1

ADD S1
MOD S1
LST S1

DSP S1

DSP S1

DSP S1

DSP S1

DSP S1
ADD S1INTERFACE
BLK S1INTERFACE
DSP S1INTERFACE
MOD S1INTERFACE
RMV S1INTERFACE
RST S1INTERFACE
UBL S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

ADD S1INTERFACE
MOD S1INTERFACE
DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE
DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE

DSP S1INTERFACE

ADD SO
DSP SO
LST SO
MOD SO
RMV SO

ADD SO
MOD SO
LST SO
ADD SO
MOD SO
LST SO

ADD SO
MOD SO
LST SO

ADD SO
MOD SO
LST SO

DSP SO

DSP SO

ADD ABLMSG
LST ABLMSG
RMV ABLMSG

ADD ABLMSG
LST ABLMSG
RMV ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG
ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG
ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

ADD ABLMSG
LST ABLMSG

BLK ENODEBFDDBBRES
DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES
UBL ENODEBFDDBBRES

DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES

DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES

DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES
DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES

DSP ENODEBFDDBBRES
LST ENODEBFDDBBRES

DSP ENODEBFDDBBRES

BLK ENODEBTDDBBRES
DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES
UBL ENODEBTDDBBRES

DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES

DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES

DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES

DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES

DSP ENODEBTDDBBRES
LST ENODEBTDDBBRES
DSP ENODEBTDDBBRES

ADD EX2
DSP EX2
LST EX2
MOD EX2
RMV EX2

ADD EX2
MOD EX2
LST EX2

ADD EX2
MOD EX2
LST EX2

ADD EX2
MOD EX2
LST EX2

ADD EX2
MOD EX2
LST EX2

ADD EX2
MOD EX2
LST EX2

DSP EX2

DSP EX2

DSP EX2

DSP EX2

LST MMEFEATURECFG
MOD MMEFEATURECFG
MOD MMEFEATURECFG
LST MMEFEATURECFG

ADD X2
DSP X2
LST X2
MOD X2
RMV X2

ADD X2
MOD X2
LST X2

ADD X2
MOD X2
LST X2

ADD X2
MOD X2
LST X2

ADD X2
MOD X2
LST X2

ADD X2
MOD X2
LST X2
ADD X2
MOD X2
LST X2

ADD X2
MOD X2
LST X2

DSP X2

DSP X2

DSP X2

DSP X2

ADD X2BLACKWHITELIST
RMV X2BLACKWHITELIST
LST X2BLACKWHITELIST
ADD X2BLACKWHITELIST
RMV X2BLACKWHITELIST
LST X2BLACKWHITELIST

ADD X2BLACKWHITELIST
RMV X2BLACKWHITELIST
LST X2BLACKWHITELIST

ADD X2BLACKWHITELIST
LST X2BLACKWHITELIST

ADD X2INTERFACE
DSP X2INTERFACE
MOD X2INTERFACE
RMV X2INTERFACE
RST X2INTERFACE

ADD X2INTERFACE
MOD X2INTERFACE
DSP X2INTERFACE

ADD X2INTERFACE
MOD X2INTERFACE
DSP X2INTERFACE

ADD X2INTERFACE
MOD X2INTERFACE
DSP X2INTERFACE

ADD X2INTERFACE
MOD X2INTERFACE
DSP X2INTERFACE
DSP X2INTERFACE

ADD X2INTERFACE
MOD X2INTERFACE
DSP X2INTERFACE

DSP X2INTERFACE

DSP X2INTERFACE

DSP X2INTERFACE

DSP X2INTERFACE
MOD DRX
LST DRX

MOD DRX
LST DRX
MOD DRX
LST DRX
MOD DRX
LST DRX
MOD DRX
LST DRX

MOD DRX
LST DRX
MOD DRX
LST DRX
MOD DRX
LST DRX

MOD DRX
LST DRX
MOD DRX
LST DRX

MOD DRX
LST DRX
MOD DRX
LST DRX

ADD EXTENDEDQCI
LST EXTENDEDQCI
MOD EXTENDEDQCI
RMV EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI
ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI
ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI
ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI
ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI
ADD EXTENDEDQCI
MOD EXTENDEDQCI
LST EXTENDEDQCI

ADD INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
RMV
INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP
ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

ADD INTERRATPOLICYCFGGROUP
MOD
INTERRATPOLICYCFGGROUP
LST INTERRATPOLICYCFGGROUP

MOD PUSCHPARAM
LST PUSCHPARAM
MOD PUSCHPARAM
LST PUSCHPARAM

MOD PUSCHPARAM
LST PUSCHPARAM

ADD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
RMV RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP
ADD RLCPDCPPARAGROUP
MOD RLCPDCPPARAGROUP
LST RLCPDCPPARAGROUP

LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG

MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG

MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG
MOD SRBRLCPDCPCFG
LST SRBRLCPDCPCFG

LST STANDARDQCI
MOD STANDARDQCI
MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI
MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI
MOD STANDARDQCI
LST STANDARDQCI

MOD STANDARDQCI
LST STANDARDQCI
MOD STANDARDQCI
LST STANDARDQCI

LST ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA
MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA

MOD ENBQCIRSVDPARA
LST ENBQCIRSVDPARA
MOD BFMIMOADAPTIVEPARACFG
LST BFMIMOADAPTIVEPARACFG
MOD BFMIMOADAPTIVEPARACFG
LST BFMIMOADAPTIVEPARACFG
MOD CQIADAPTIVECFG
LST CQIADAPTIVECFG

MOD CQIADAPTIVECFG
LST CQIADAPTIVECFG
MOD CQIADAPTIVECFG
LST CQIADAPTIVECFG
MOD CQIADAPTIVECFG
LST CQIADAPTIVECFG

MOD CQIADAPTIVECFG
LST CQIADAPTIVECFG
MOD MIMOADAPTIVEPARACFG
LST MIMOADAPTIVEPARACFG
MOD MIMOADAPTIVEPARACFG
LST MIMOADAPTIVEPARACFG
MOD MIMOADAPTIVEPARACFG
LST MIMOADAPTIVEPARACFG

MOD SRSADAPTIVECFG
LST SRSADAPTIVECFG
MOD SRSADAPTIVECFG
LST SRSADAPTIVECFG

ADD UECOMPATOPT
LST UECOMPATOPT
MOD UECOMPATOPT
RMV UECOMPATOPT

ADD UECOMPATOPT
MOD UECOMPATOPT
LST UECOMPATOPT

ADD UECOMPATOPT
MOD UECOMPATOPT
LST UECOMPATOPT
ADD UECOMPATOPT
MOD UECOMPATOPT
LST UECOMPATOPT

ADD UECOMPATOPT
MOD UECOMPATOPT
LST UECOMPATOPT

LST TYPDRBBSR
MOD TYPDRBBSR
MOD TYPDRBBSR
LST TYPDRBBSR

MOD TYPDRBBSR
LST TYPDRBBSR
MOD HOMEASCOMM
LST HOMEASCOMM

MOD HOMEASCOMM
LST HOMEASCOMM

MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM

MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM

MOD HOMEASCOMM
LST HOMEASCOMM

MOD HOMEASCOMM
LST HOMEASCOMM
MOD HOMEASCOMM
LST HOMEASCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTERRATHOCOMM
LST INTERRATHOCOMM

MOD INTERRATHOCOMM
LST INTERRATHOCOMM
MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM
MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM
MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM
MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM
MOD INTRARATHOCOMM
LST INTRARATHOCOMM

MOD INTRARATHOCOMM
LST INTRARATHOCOMM

LST CSFALLBACKHO
MOD CSFALLBACKHO
MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO
MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO

MOD CSFALLBACKHO
LST CSFALLBACKHO
MOD CSFALLBACKHO
LST CSFALLBACKHO

LST CELLACBAR
MOD CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

MOD CELLACBAR
LST CELLACBAR
MOD CELLACBAR
LST CELLACBAR

LST CELLACCESS
MOD CELLACCESS

MOD CELLACCESS
LST CELLACCESS

MOD CELLACCESS
LST CELLACCESS

MOD CELLACCESS
LST CELLACCESS

MOD CELLACCESS
LST CELLACCESS
MOD CELLACCESS
LST CELLACCESS

MOD CELLACCESS
LST CELLACCESS

MOD CELLACCESS
LST CELLACCESS

ADD CELLOP
DSP
CELLBROADCASTCNOPERATOR
LST CELLOP
MOD CELLOP
RMV CELLOP
ADD CELLOP
LST CELLOP
MOD CELLOP
RMV CELLOP
ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP
ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP
ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

ADD CELLOP
MOD CELLOP
LST CELLOP

DSP
CELLBROADCASTCNOPERATOR

LST CELLRESEL
MOD CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL
MOD CELLRESEL
LST CELLRESEL

MOD CELLRESEL
LST CELLRESEL

ADD CELLRESELCDMA2000
LST CELLRESELCDMA2000
MOD CELLRESELCDMA2000
RMV CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000
ADD CELLRESELCDMA2000
MOD CELLRESELCDMA2000
LST CELLRESELCDMA2000

ADD CELLRESELGERAN
LST CELLRESELGERAN
MOD CELLRESELGERAN
RMV CELLRESELGERAN

ADD CELLRESELGERAN
MOD CELLRESELGERAN
LST CELLRESELGERAN

ADD CELLRESELGERAN
MOD CELLRESELGERAN
LST CELLRESELGERAN
ADD CELLRESELGERAN
MOD CELLRESELGERAN
LST CELLRESELGERAN

ADD CELLRESELGERAN
MOD CELLRESELGERAN
LST CELLRESELGERAN

ADD CELLRESELUTRAN
LST CELLRESELUTRAN
MOD CELLRESELUTRAN
RMV CELLRESELUTRAN

ADD CELLRESELUTRAN
MOD CELLRESELUTRAN
LST CELLRESELUTRAN

ADD CELLRESELUTRAN
MOD CELLRESELUTRAN
LST CELLRESELUTRAN
ADD CELLRESELUTRAN
MOD CELLRESELUTRAN
LST CELLRESELUTRAN

ADD CELLRESELUTRAN
MOD CELLRESELUTRAN
LST CELLRESELUTRAN

LST CELLSEL
MOD CELLSEL

MOD CELLSEL
LST CELLSEL
MOD CELLSEL
LST CELLSEL

MOD CELLSEL
LST CELLSEL

MOD CELLSEL
LST CELLSEL
MOD CELLSEL
LST CELLSEL

LST CELLSIMAP
MOD CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP
MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP
MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP
MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP
MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP
MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

MOD CELLSIMAP
LST CELLSIMAP

LST CELLULPCCOMM
MOD CELLULPCCOMM
MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM
MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM
MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM
MOD CELLULPCCOMM
LST CELLULPCCOMM

MOD CELLULPCCOMM
LST CELLULPCCOMM

LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA

LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA
MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

MOD ENBCELLOPRSVDPARA
LST ENBCELLOPRSVDPARA

ADD EUCELLPRIBBEQM
LST EUCELLPRIBBEQM
MOD EUCELLPRIBBEQM
RMV EUCELLPRIBBEQM

ADD EUCELLPRIBBEQM
MOD EUCELLPRIBBEQM
LST EUCELLPRIBBEQM
ADD EUCELLSECTOREQM
LST EUCELLSECTOREQM
MOD EUCELLSECTOREQM
RMV EUCELLSECTOREQM
DSP EURTWP
ADD EUCELLSECTOREQM
DSP EURTWP
LST EUCELLSECTOREQM
MOD EUCELLSECTOREQM
RMV EUCELLSECTOREQM

ADD EUCELLSECTOREQM
MOD EUCELLSECTOREQM
LST EUCELLSECTOREQM

ADD EUCELLSECTOREQM
MOD EUCELLSECTOREQM
LST EUCELLSECTOREQM

DSP EURTWP

DSP EURTWP

DSP EURTWP

DSP EURTWP

DSP EURTWP
ADD EUCELLSECTOREQM
MOD EUCELLSECTOREQM
LST EUCELLSECTOREQM

ADD EUCELLSECTOREQM
MOD EUCELLSECTOREQM
LST EUCELLSECTOREQM

DSP EURTWP

ADD EUSECTOREQMGROUP
ADD EUSECTOREQMID2GROUP
LST EUSECTOREQMGROUP
LST EUSECTOREQMID2GROUP
MOD EUSECTOREQMGROUP
RMV EUSECTOREQMGROUP
RMV EUSECTOREQMID2GROUP

ADD EUSECTOREQMGROUP
ADD EUSECTOREQMID2GROUP
LST EUSECTOREQMGROUP
LST EUSECTOREQMID2GROUP
MOD EUSECTOREQMGROUP
RMV EUSECTOREQMGROUP
RMV EUSECTOREQMID2GROUP
LST EUSECTOREQMID2GROUP

ADD EUSECTOREQMID2GROUP
RMV EUSECTOREQMID2GROUP
LST EUSECTOREQMID2GROUP

ADD EUSECTOREQMGROUP
MOD EUSECTOREQMGROUP
LST EUSECTOREQMGROUP

ADD EUSECTOREQMGROUP
MOD EUSECTOREQMGROUP
LST EUSECTOREQMGROUP
ADD EUSECTOREQMGROUP
MOD EUSECTOREQMGROUP
LST EUSECTOREQMGROUP

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO
DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO

DSP IBDLINFO
LST TATIMER
MOD TATIMER

MOD TATIMER
LST TATIMER
MOD TATIMER
LST TATIMER
MOD TATIMER
LST TATIMER
MOD TATIMER
LST TATIMER
MOD TATIMER
LST TATIMER
MOD TATIMER
LST TATIMER

LST UETIMERCONST
MOD UETIMERCONST

MOD UETIMERCONST
LST UETIMERCONST
MOD UETIMERCONST
LST UETIMERCONST

MOD UETIMERCONST
LST UETIMERCONST

MOD UETIMERCONST
LST UETIMERCONST

MOD UETIMERCONST
LST UETIMERCONST

MOD UETIMERCONST
LST UETIMERCONST
ACT CELL
ADD CELL
ADD CELLBAND
BLK CELL
DEA CELL
DSP CELL
DSP CELLPHYTOPO
DSP CELLULCOMPCLUSTER
DSP LIOPTRULE
DSP PRIBBPADJUST
LST CELL
LST CELLBAND
MOD CELL
RMV CELL
RMV CELLBAND
RMV CELLNRT
STR CELLRFLOOPBACK
STR CELLSELFTEST
STR LRTWPRTTST
STR PRIBBPADJUST
UBL CELL
DSP LRTWPRTTST
DSP PRIBBPRESINFO

ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
ADD CELLBAND
LST CELLBAND
MOD CELL
RMV CELLBAND
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
LST CELL

BLK CELL
LST CELL

BLK CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
DSP CELL

DSP CELL
STR PRIBBPADJUST

DSP CELL
DSP CELL

DSP CELL
DSP CELL
DSP CELL

DSP CELL
DSP PRIBBPADJUST
DSP CELL

STR CELLRFLOOPBACK

STR CELLRFLOOPBACK

STR CELLRFLOOPBACK

DSP CELL

DSP CELL

DSP CELL
DSP CELLPHYTOPO

DSP PRIBBPRESINFO
DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP CELL

DSP CELLULCOMPCLUSTER

ADD CELLBAND
LST CELLBAND
RMV CELLBAND
ADD CELLBAND
LST CELLBAND
RMV CELLBAND

ADD CELL
MOD CELL
LST CELL

DSP CELL
DSP CELLPHYTOPO

DSP CELL
DSP CELLPHYTOPO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO

DSP PRIBBPRESINFO
STR PRIBBPADJUST

STR PRIBBPADJUST

ADD CELL
MOD CELL
LST CELL

DSP CELLPHYTOPO

DSP CELL

DSP CELL

DSP CELLPHYTOPO
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL
ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL

ADD CELL
MOD CELL
LST CELL

DSP CELLULCOMPCLUSTER
DSP CELLULCOMPCLUSTER

DSP CELLULCOMPCLUSTER

DSP CELLULCOMPCLUSTER

ADD CELL
MOD CELL
LST CELL

DSP CELL

DSP CELLULCOMPCLUSTER

DSP CELLULCOMPCLUSTER
DSP CELLULCOMPCLUSTER

DSP CELLULCOMPCLUSTER

ADD SFNAUXRESBIND
LST SFNAUXRESBIND
MOD SFNAUXRESBIND
RMV SFNAUXRESBIND
ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
RMV SFNAUXRESBIND
LST SFNAUXRESBIND
ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
RMV SFNAUXRESBIND
LST SFNAUXRESBIND

ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
LST SFNAUXRESBIND

ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
LST SFNAUXRESBIND

ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
LST SFNAUXRESBIND
ADD SFNAUXRESBIND
MOD SFNAUXRESBIND
LST SFNAUXRESBIND

ADD SFNAUXRESGRPBIND
ADD SFNAUXSECTOREQM2GRP
LST SFNAUXRESGRPBIND
LST SFNAUXSECTOREQM2GRP
MOD SFNAUXRESGRPBIND
RMV SFNAUXRESGRPBIND
RMV SFNAUXSECTOREQM2GRP

ADD SFNAUXRESGRPBIND
ADD SFNAUXSECTOREQM2GRP
LST SFNAUXRESGRPBIND
LST SFNAUXSECTOREQM2GRP
MOD SFNAUXRESGRPBIND
RMV SFNAUXRESGRPBIND
RMV SFNAUXSECTOREQM2GRP

ADD SFNAUXRESGRPBIND
ADD SFNAUXSECTOREQM2GRP
LST SFNAUXRESGRPBIND
LST SFNAUXSECTOREQM2GRP
MOD SFNAUXRESGRPBIND
RMV SFNAUXRESGRPBIND
RMV SFNAUXSECTOREQM2GRP
ADD SFNAUXRESGRPBIND
MOD SFNAUXRESGRPBIND
LST SFNAUXRESGRPBIND

ADD SFNAUXRESGRPBIND
MOD SFNAUXRESGRPBIND
LST SFNAUXRESGRPBIND

ADD SFNAUXSECTOREQM2GRP
LST SFNAUXSECTOREQM2GRP
RMV SFNAUXSECTOREQM2GRP

ADD SFNAUXSECTOREQM2GRP
RMV SFNAUXSECTOREQM2GRP
LST SFNAUXSECTOREQM2GRP

ADD SFNAUXRESGRPBIND
MOD SFNAUXRESGRPBIND
LST SFNAUXRESGRPBIND
ADD SFNCELLBIND
LST SFNCELLBIND
RMV SFNCELLBIND

ADD SFNCELLBIND
RMV SFNCELLBIND
LST SFNCELLBIND

LST CELLBACKOFF
MOD CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF
MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF

MOD CELLBACKOFF
LST CELLBACKOFF

DSP CELLCALIBRATION
LST CELLBF
MOD CELLBF
MOD CELLBF
LST CELLBF

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION

DSP CELLCALIBRATION
DSP CELLCALIBRATION

DSP CELLCALIBRATION

MOD CELLBF
LST CELLBF

LST CELLCQIADJALGO
MOD CELLCQIADJALGO
MOD CELLCQIADJALGO
LST CELLCQIADJALGO

MOD CELLCQIADJALGO
LST CELLCQIADJALGO
MOD CELLCQIADJALGO
LST CELLCQIADJALGO

MOD CELLCQIADJALGO
LST CELLCQIADJALGO

DSP CELLCSIRSPARACFG
LST CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG

MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG

DSP CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG
MOD CELLCSIRSPARACFG
LST CELLCSIRSPARACFG

DSP CELLCSPCSTATUS
DSP CELLDLCOMPSTATUS
LST CELLCSPCPARA
MOD CELLCSPCPARA

MOD CELLCSPCPARA
LST CELLCSPCPARA

MOD CELLCSPCPARA
LST CELLCSPCPARA
MOD CELLCSPCPARA
LST CELLCSPCPARA

MOD CELLCSPCPARA
LST CELLCSPCPARA

MOD CELLCSPCPARA
LST CELLCSPCPARA
MOD CELLCSPCPARA
LST CELLCSPCPARA

MOD CELLCSPCPARA
LST CELLCSPCPARA

DSP CELLCSPCSTATUS
DSP CELLCSPCSTATUS

DSP CELLCSPCSTATUS

DSP CELLDLCOMPSTATUS
LST CELLDLICICMCPARA
MOD CELLDLICICMCPARA

MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA

MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA
MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA

MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA

MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA
MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA

MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA
MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA
MOD CELLDLICICMCPARA
LST CELLDLICICMCPARA

LST CELLDSS
MOD CELLDSS

MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS

MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS
MOD CELLDSS
LST CELLDSS

MOD CELLDSS
LST CELLDSS

LST CELLDYNACBARALGOPARA
MOD CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA
MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA
MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA
MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

MOD CELLDYNACBARALGOPARA
LST CELLDYNACBARALGOPARA

LST CELLEICIC
MOD CELLEICIC
MOD CELLEICIC
LST CELLEICIC

MOD CELLEICIC
LST CELLEICIC
MOD CELLEICIC
LST CELLEICIC

MOD CELLEICIC
LST CELLEICIC

ADD CELLFRAMEOFFSET
LST CELLFRAMEOFFSET
MOD CELLFRAMEOFFSET
RMV CELLFRAMEOFFSET
ADD CELLFRAMEOFFSET
MOD CELLFRAMEOFFSET
LST CELLFRAMEOFFSET

ADD CELLFRAMEOFFSET
MOD CELLFRAMEOFFSET
LST CELLFRAMEOFFSET

LST CELLIICSPARA
MOD CELLIICSPARA
MOD CELLIICSPARA
LST CELLIICSPARA
MOD CELLIICSPARA
LST CELLIICSPARA

LST CELLLOWPOWER
MOD CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER
MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER
MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER
MOD CELLLOWPOWER
LST CELLLOWPOWER

MOD CELLLOWPOWER
LST CELLLOWPOWER

ADD SERVICEAREAID2LIST
DSP CELLMBMSCFG
LST CELLMBMSCFG
LST SERVICEAREAID2LIST
MOD CELLMBMSCFG
RMV SERVICEAREAID2LIST

DSP CELLMBMSCFG

MOD CELLMBMSCFG
LST CELLMBMSCFG

DSP CELLMBMSCFG
MOD CELLMBMSCFG
LST CELLMBMSCFG

ADD SERVICEAREAID2LIST
LST SERVICEAREAID2LIST
RMV SERVICEAREAID2LIST

ADD SERVICEAREAID2LIST
LST SERVICEAREAID2LIST
RMV SERVICEAREAID2LIST

MOD CELLMBMSCFG
LST CELLMBMSCFG

MOD CELLMBMSCFG
LST CELLMBMSCFG

LST CELLMLBUESEL
MOD CELLMLBUESEL

MOD CELLMLBUESEL
LST CELLMLBUESEL
MOD CELLMLBUESEL
LST CELLMLBUESEL

MOD CELLMLBUESEL
LST CELLMLBUESEL

MOD CELLMLBUESEL
LST CELLMLBUESEL

MOD CELLMLBUESEL
LST CELLMLBUESEL

MOD CELLMLBUESEL
LST CELLMLBUESEL

LST CELLMRO
MOD CELLMRO
MOD CELLMRO
LST CELLMRO
MOD CELLMRO
LST CELLMRO
MOD CELLMRO
LST CELLMRO

MOD CELLMRO
LST CELLMRO

MOD CELLMRO
LST CELLMRO

MOD CELLMRO
LST CELLMRO

MOD CELLMRO
LST CELLMRO
MOD CELLMRO
LST CELLMRO

LST CELLPCALGO
MOD CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

MOD CELLPCALGO
LST CELLPCALGO
MOD CELLPCALGO
LST CELLPCALGO

LST CELLPRBVALMLB
MOD CELLPRBVALMLB

MOD CELLPRBVALMLB
LST CELLPRBVALMLB
MOD CELLPRBVALMLB
LST CELLPRBVALMLB

MOD CELLPRBVALMLB
LST CELLPRBVALMLB

MOD CELLPRBVALMLB
LST CELLPRBVALMLB

DSP ROOTSEQCONFLICT
LST CELLRACHALGO
MOD CELLRACHALGO
MOD CELLRACHALGO
LST CELLRACHALGO
MOD CELLRACHALGO
LST CELLRACHALGO

DSP ROOTSEQCONFLICT

DSP ROOTSEQCONFLICT

DSP ROOTSEQCONFLICT

DSP ROOTSEQCONFLICT
MOD CELLRACHALGO
LST CELLRACHALGO

MOD CELLRACHALGO
LST CELLRACHALGO
MOD CELLRACHALGO
LST CELLRACHALGO

LST CELLRACTHD
MOD CELLRACTHD

MOD CELLRACTHD
LST CELLRACTHD

MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD

MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD

MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD
MOD CELLRACTHD
LST CELLRACTHD

MOD CELLRACTHD
LST CELLRACTHD

DSP CELLRFSHUTDOWN
LST CELLRFSHUTDOWN
MOD CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN
MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN
MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN

MOD CELLRFSHUTDOWN
LST CELLRFSHUTDOWN
DSP CELLRFSHUTDOWN
DSP CELLRFSHUTDOWN

GET CELLRICDATA
LST CELLRICALGO
MOD CELLRICALGO
SND CELLRICPCISEQ

MOD CELLRICALGO
LST CELLRICALGO
MOD CELLRICALGO
LST CELLRICALGO

MOD CELLRICALGO
LST CELLRICALGO

LST CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG
MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

MOD CELLSERVICEDIFFCFG
LST CELLSERVICEDIFFCFG

LST CELLSHUTDOWN
MOD CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN
MOD CELLSHUTDOWN
LST CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN

MOD CELLSHUTDOWN
LST CELLSHUTDOWN

LST CELLSRLTE
MOD CELLSRLTE

MOD CELLSRLTE
LST CELLSRLTE
MOD CELLSRLTE
LST CELLSRLTE

MOD CELLSRLTE
LST CELLSRLTE
LST CELLULICICMCPARA
MOD CELLULICICMCPARA

MOD CELLULICICMCPARA
LST CELLULICICMCPARA

LST CELLULSCHALGO
MOD CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
MOD CELLULSCHALGO
LST CELLULSCHALGO

MOD CELLULSCHALGO
LST CELLULSCHALGO
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC

MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC
MOD CELLULUNIFIEDOLC
LST CELLULUNIFIEDOLC

LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA
MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

MOD ENBCELLRSVDPARA
LST ENBCELLRSVDPARA

LST INTERRATCELLSHUTDOWN
MOD INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN
MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN
MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN
MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN
MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

MOD INTERRATCELLSHUTDOWN
LST INTERRATCELLSHUTDOWN

LST RRUJOINTCALPARACFG
MOD RRUJOINTCALPARACFG
MOD RRUJOINTCALPARACFG
LST RRUJOINTCALPARACFG

MOD RRUJOINTCALPARACFG
LST RRUJOINTCALPARACFG
MOD RRUJOINTCALPARACFG
LST RRUJOINTCALPARACFG

MOD RRUJOINTCALPARACFG
LST RRUJOINTCALPARACFG
ADD SUPERCOMBCELL
LST SUPERCOMBCELL
MOD SUPERCOMBCELL
RMV SUPERCOMBCELL

ADD SUPERCOMBCELL
MOD SUPERCOMBCELL
LST SUPERCOMBCELL

LST ULZEROBUFFERZONE
MOD ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE
MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

MOD ULZEROBUFFERZONE
LST ULZEROBUFFERZONE

LST UPPTSINTERFCFG
MOD UPPTSINTERFCFG

MOD UPPTSINTERFCFG
LST UPPTSINTERFCFG

MOD UPPTSINTERFCFG
LST UPPTSINTERFCFG
MOD UPPTSINTERFCFG
LST UPPTSINTERFCFG

LST USERVPFMPARA
MOD USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA

MOD USERVPFMPARA
LST USERVPFMPARA
MOD USERVPFMPARA
LST USERVPFMPARA

DSP CELLULCAMCCLUSTER
LST CELLALGOSWITCH
MOD CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH
MOD CELLALGOSWITCH
LST CELLALGOSWITCH

MOD CELLALGOSWITCH
LST CELLALGOSWITCH

LST CELLDLICIC
MOD CELLDLICIC
MOD CELLDLICIC
LST CELLDLICIC

MOD CELLDLICIC
LST CELLDLICIC
MOD CELLDLICIC
LST CELLDLICIC

LST CELLDLPCPDCCH
MOD CELLDLPCPDCCH
MOD CELLDLPCPDCCH
LST CELLDLPCPDCCH

LST CELLDLPCPDSCH
MOD CELLDLPCPDSCH
MOD CELLDLPCPDSCH
LST CELLDLPCPDSCH
MOD CELLDLPCPDSCH
LST CELLDLPCPDSCH

LST CELLDLPCPHICH
MOD CELLDLPCPHICH
MOD CELLDLPCPHICH
LST CELLDLPCPHICH

DSP LBT
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

MOD CELLDLSCHALGO
LST CELLDLSCHALGO

DSP LBT

DSP LBT

DSP LBT
MOD CELLDLSCHALGO
LST CELLDLSCHALGO

LST CELLMLB
MOD CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

MOD CELLMLB
LST CELLMLB
MOD CELLMLB
LST CELLMLB

LST CELLUSPARACFG
MOD CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG
MOD CELLUSPARACFG
LST CELLUSPARACFG

MOD CELLUSPARACFG
LST CELLUSPARACFG
LST CELLPDCCHALGO
MOD CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

MOD CELLPDCCHALGO
LST CELLPDCCHALGO
MOD CELLPDCCHALGO
LST CELLPDCCHALGO

LST CELLPUCCHALGO
MOD CELLPUCCHALGO
MOD CELLPUCCHALGO
LST CELLPUCCHALGO
MOD CELLPUCCHALGO
LST CELLPUCCHALGO
MOD CELLPUCCHALGO
LST CELLPUCCHALGO

LST CELLCOUNTERPARAGROUP
MOD CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP
MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP
MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP
MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP
MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

MOD CELLCOUNTERPARAGROUP
LST CELLCOUNTERPARAGROUP

None
None

None

LST CELLNOACCESSALMPARA
MOD CELLNOACCESSALMPARA

MOD CELLNOACCESSALMPARA
LST CELLNOACCESSALMPARA

MOD CELLNOACCESSALMPARA
LST CELLNOACCESSALMPARA
MOD CELLNOACCESSALMPARA
LST CELLNOACCESSALMPARA

LST CELLULICIC
MOD CELLULICIC

MOD CELLULICIC
LST CELLULICIC

LST GERANINTERFCFG
MOD GERANINTERFCFG
MOD GERANINTERFCFG
LST GERANINTERFCFG

MOD GERANINTERFCFG
LST GERANINTERFCFG

ADD CELLRELAYALGOPARA
LST CELLRELAYALGOPARA
MOD CELLRELAYALGOPARA
RMV CELLRELAYALGOPARA

ADD CELLRELAYALGOPARA
MOD CELLRELAYALGOPARA
LST CELLRELAYALGOPARA
ADD CELLRELAYALGOPARA
MOD CELLRELAYALGOPARA
LST CELLRELAYALGOPARA

ADD CELLRELAYALGOPARA
MOD CELLRELAYALGOPARA
LST CELLRELAYALGOPARA

ADD CELLRELAYALGOPARA
MOD CELLRELAYALGOPARA
LST CELLRELAYALGOPARA

ADD CELLSIMULOAD
DSP CELLSIMULOAD
LST CELLSIMULOAD
MOD CELLSIMULOAD
RMV CELLSIMULOAD

ADD CELLSIMULOAD
MOD CELLSIMULOAD
LST CELLSIMULOAD
ADD CELLSIMULOAD
MOD CELLSIMULOAD
LST CELLSIMULOAD

ADD CELLSIMULOAD
MOD CELLSIMULOAD
LST CELLSIMULOAD

DSP CELLSIMULOAD

DSP CELLSIMULOAD

DSP CELLSIMULOAD

DSP CELLSIMULOAD

DSP CELLSIMULOAD

DSP CELLSIMULOAD

ADD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION
MOD SFNEDGERRURELATION
RMV SFNEDGERRURELATION
ADD SFNEDGERRURELATION
LST SFNEDGERRURELATION
MOD SFNEDGERRURELATION
RMV SFNEDGERRURELATION
DSP SFNEDGERRURELATION
ADD SFNEDGERRURELATION
MOD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION

ADD SFNEDGERRURELATION
MOD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION

ADD SFNEDGERRURELATION
MOD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION
ADD SFNEDGERRURELATION
MOD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION
ADD SFNEDGERRURELATION
MOD SFNEDGERRURELATION
DSP SFNEDGERRURELATION
LST SFNEDGERRURELATION

LST BCCHCFG
MOD BCCHCFG

MOD BCCHCFG
LST BCCHCFG

LST CELLCHPWRCFG
MOD CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG

MOD CELLCHPWRCFG
LST CELLCHPWRCFG
MOD CELLCHPWRCFG
LST CELLCHPWRCFG

LST PDSCHCFG
MOD PDSCHCFG

MOD PDSCHCFG
LST PDSCHCFG
MOD PDSCHCFG
LST PDSCHCFG

MOD PDSCHCFG
LST PDSCHCFG

DSP RACHCFG
LST RACHCFG
MOD RACHCFG

MOD RACHCFG
LST RACHCFG
MOD RACHCFG
LST RACHCFG

DSP RACHCFG

MOD RACHCFG
LST RACHCFG
MOD RACHCFG
LST RACHCFG

MOD RACHCFG
LST RACHCFG
MOD RACHCFG
LST RACHCFG

MOD RACHCFG
LST RACHCFG
MOD RACHCFG
LST RACHCFG

MOD RACHCFG
LST RACHCFG

MOD RACHCFG
LST RACHCFG
MOD RACHCFG
LST RACHCFG

DSP SRSCFG
LST SRSCFG
MOD SRSCFG

MOD SRSCFG
LST SRSCFG
MOD SRSCFG
LST SRSCFG
MOD SRSCFG
LST SRSCFG
MOD SRSCFG
LST SRSCFG
MOD SRSCFG
LST SRSCFG

DSP SRSCFG

LST PHICHCFG
MOD PHICHCFG
MOD PHICHCFG
LST PHICHCFG

MOD PHICHCFG
LST PHICHCFG

LST PCCHCFG
MOD PCCHCFG
MOD PCCHCFG
LST PCCHCFG

MOD PCCHCFG
LST PCCHCFG
MOD PCCHCFG
LST PCCHCFG
MOD PCCHCFG
LST PCCHCFG
MOD PCCHCFG
LST PCCHCFG

LST PUSCHCFG
MOD PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG

MOD PUSCHCFG
LST PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG

MOD PUSCHCFG
LST PUSCHCFG
MOD PUSCHCFG
LST PUSCHCFG

DSP PUCCHCFG
LST PUCCHCFG
MOD PUCCHCFG

MOD PUCCHCFG
LST PUCCHCFG
MOD PUCCHCFG
LST PUCCHCFG

MOD PUCCHCFG
LST PUCCHCFG
MOD PUCCHCFG
LST PUCCHCFG

DSP PUCCHCFG
MOD PUCCHCFG
LST PUCCHCFG
MOD PUCCHCFG
LST PUCCHCFG

ADD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
RMV CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
RMV CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
RMV CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG
ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA20001XRTTPREREG
MOD CDMA20001XRTTPREREG
LST CDMA20001XRTTPREREG

ADD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
RMV CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
RMV CDMA2000HRPDNCELL
ADD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
RMV CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
RMV CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
RMV CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL

LST CDMA2000HRPDNCELL
ADD CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL

ADD CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL
ADD CDMA2000HRPDNCELL
MOD CDMA2000HRPDNCELL
LST CDMA2000HRPDNCELL

ADD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
RMV CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
RMV CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
RMV CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG
ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG
ADD CDMA2000HRPDPREREG
MOD CDMA2000HRPDPREREG
LST CDMA2000HRPDPREREG

ADD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
RMV CDMA2000HRPDREFCELL

ADD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
RMV CDMA2000HRPDREFCELL

ADD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
RMV CDMA2000HRPDREFCELL
ADD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
RMV CDMA2000HRPDREFCELL

ADD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
RMV CDMA2000HRPDREFCELL
ADD CDMA2000HRPDREFCELL
MOD CDMA2000HRPDREFCELL
LST CDMA2000HRPDREFCELL

ADD CDMA2000NFREQ
LST CDMA2000NFREQ
MOD CDMA2000NFREQ
RMV CDMA2000NFREQ

ADD CDMA2000NFREQ
LST CDMA2000NFREQ
MOD CDMA2000NFREQ
RMV CDMA2000NFREQ

ADD CDMA2000NFREQ
LST CDMA2000NFREQ
MOD CDMA2000NFREQ
RMV CDMA2000NFREQ
ADD CDMA2000NFREQ
MOD CDMA2000NFREQ
LST CDMA2000NFREQ

ADD CDMA2000NFREQ
MOD CDMA2000NFREQ
LST CDMA2000NFREQ

ADD CDMA2000NFREQ
MOD CDMA2000NFREQ
LST CDMA2000NFREQ
ADD CDMA2000NFREQ
MOD CDMA2000NFREQ
LST CDMA2000NFREQ

ADD CLUSTER
LST CLUSTER
RMV CLUSTER

ADD CLUSTERCELL
DSP CLUSTERCELL
LST CLUSTERCELL
RMV CLUSTERCELL

ADD CLUSTERCELL
LST CLUSTERCELL
RMV CLUSTERCELL
DSP CLUSTERCELL

ADD CLUSTERCELL
LST CLUSTERCELL
RMV CLUSTERCELL
DSP CLUSTERCELL

ADD CLUSTERCELL
LST CLUSTERCELL
RMV CLUSTERCELL
DSP CLUSTERCELL
ADD CLUSTERCELL
LST CLUSTERCELL
RMV CLUSTERCELL
DSP CLUSTERCELL

DSP CLUSTERCELL

ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL
ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL

ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL
ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL

ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL
ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL

ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL

ADD CSPCCELLSRSMEASNCELL
LST CSPCCELLSRSMEASNCELL
RMV CSPCCELLSRSMEASNCELL
ADD CSPCCLUSTER
LST CSPCCLUSTER
RMV CSPCCLUSTER

ADD CSPCCLUSTERCELL
LST CSPCCLUSTERCELL
RMV CSPCCLUSTERCELL

ADD CSPCCLUSTERCELL
LST CSPCCLUSTERCELL
RMV CSPCCLUSTERCELL

ADD CSPCCLUSTERCELL
LST CSPCCLUSTERCELL
RMV CSPCCLUSTERCELL

ADD CSPCCLUSTERCELL
LST CSPCCLUSTERCELL
RMV CSPCCLUSTERCELL

ADD CSPCCLUSTERCELL
LST CSPCCLUSTERCELL
RMV CSPCCLUSTERCELL
ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN

ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN

ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN

ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN

ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN
ADD
EUTRANEXTERNALCELLPLMN
LST EUTRANEXTERNALCELLPLMN
RMV
EUTRANEXTERNALCELLPLMN

ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN

ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN

ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN

ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN
ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN

ADD GERANEXTERNALCELLPLMN
LST GERANEXTERNALCELLPLMN
RMV GERANEXTERNALCELLPLMN

ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN

ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN

ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN
ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN

ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN

ADD UTRANEXTERNALCELLPLMN
LST UTRANEXTERNALCELLPLMN
RMV UTRANEXTERNALCELLPLMN

ADD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
RMV CDMA2000HRPDEXTCELL
ADD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
RMV CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
RMV CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
RMV CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL
ADD CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL

ADD CDMA2000HRPDEXTCELL
MOD CDMA2000HRPDEXTCELL
LST CDMA2000HRPDEXTCELL

ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL
ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL
ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
RMV CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL
ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTEXTCELL
MOD CDMA20001XRTTEXTCELL
LST CDMA20001XRTTEXTCELL

ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL
ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL
ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL
ADD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
RMV CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL

LST CDMA20001XRTTNCELL
ADD CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL

ADD CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL
ADD CDMA20001XRTTNCELL
MOD CDMA20001XRTTNCELL
LST CDMA20001XRTTNCELL

ADD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
RMV CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
RMV CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS
ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS

ADD CDMA2000BANDCLASS
MOD CDMA2000BANDCLASS
LST CDMA2000BANDCLASS
ADD GERANEXTERNALCELL
LST GERANEXTERNALCELL
MOD GERANEXTERNALCELL
RMV GERANEXTERNALCELL

ADD GERANEXTERNALCELL
LST GERANEXTERNALCELL
MOD GERANEXTERNALCELL
RMV GERANEXTERNALCELL

ADD GERANEXTERNALCELL
LST GERANEXTERNALCELL
MOD GERANEXTERNALCELL
RMV GERANEXTERNALCELL
ADD GERANEXTERNALCELL
LST GERANEXTERNALCELL
MOD GERANEXTERNALCELL
RMV GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL
ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL
ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL

ADD GERANEXTERNALCELL
MOD GERANEXTERNALCELL
LST GERANEXTERNALCELL
ADD GERANNCELL
DSP GERANNCELL
DSP GERANRIMINFO
LST GERANNCELL
MOD GERANNCELL
RMV GERANNCELL

ADD GERANNCELL
DSP GERANNCELL
LST GERANNCELL
MOD GERANNCELL
RMV GERANNCELL
DSP GERANRIMINFO

ADD GERANNCELL
DSP GERANNCELL
LST GERANNCELL
MOD GERANNCELL
RMV GERANNCELL
DSP GERANRIMINFO

ADD GERANNCELL
DSP GERANNCELL
LST GERANNCELL
MOD GERANNCELL
RMV GERANNCELL
DSP GERANRIMINFO

ADD GERANNCELL
DSP GERANNCELL
LST GERANNCELL
MOD GERANNCELL
RMV GERANNCELL
DSP GERANRIMINFO

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL
LST GERANNCELL

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL
ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL

ADD GERANNCELL
LST GERANNCELL

ADD GERANNCELL
MOD GERANNCELL
LST GERANNCELL

DSP GERANRIMINFO

DSP GERANRIMINFO

DSP GERANRIMINFO
ADD GERANNFREQGROUP
LST GERANNFREQGROUP
MOD GERANNFREQGROUP
RMV GERANNFREQGROUP

ADD GERANNFREQGROUP
LST GERANNFREQGROUP
MOD GERANNFREQGROUP
RMV GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP
ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP
ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP
ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP
ADD GERANNFREQGROUP
MOD GERANNFREQGROUP
LST GERANNFREQGROUP

ADD GERANNFREQGROUPARFCN
LST GERANNFREQGROUPARFCN
RMV GERANNFREQGROUPARFCN

ADD GERANNFREQGROUPARFCN
LST GERANNFREQGROUPARFCN
RMV GERANNFREQGROUPARFCN

ADD GERANNFREQGROUPARFCN
LST GERANNFREQGROUPARFCN
RMV GERANNFREQGROUPARFCN

ADD INTRAFREQBLKCELL
LST INTRAFREQBLKCELL
MOD INTRAFREQBLKCELL
RMV INTRAFREQBLKCELL
ADD INTRAFREQBLKCELL
LST INTRAFREQBLKCELL
MOD INTRAFREQBLKCELL
RMV INTRAFREQBLKCELL

ADD INTRAFREQBLKCELL
MOD INTRAFREQBLKCELL
LST INTRAFREQBLKCELL

ADD INTRAFREQBLKCELL
MOD INTRAFREQBLKCELL
LST INTRAFREQBLKCELL

ADD EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
RMV EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
RMV EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
RMV EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
RMV EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
RMV EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

LST EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL
DSP EUTRANINTRAFREQNCELL

DSP EUTRANINTRAFREQNCELL
ADD EUTRANINTRAFREQNCELL
MOD EUTRANINTRAFREQNCELL
LST EUTRANINTRAFREQNCELL

ADD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
RMV EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
RMV EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ
ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD EUTRANINTERNFREQ
MOD EUTRANINTERNFREQ
LST EUTRANINTERNFREQ

ADD INTERFREQBLKCELL
LST INTERFREQBLKCELL
MOD INTERFREQBLKCELL
RMV INTERFREQBLKCELL
ADD INTERFREQBLKCELL
LST INTERFREQBLKCELL
MOD INTERFREQBLKCELL
RMV INTERFREQBLKCELL

ADD INTERFREQBLKCELL
LST INTERFREQBLKCELL
MOD INTERFREQBLKCELL
RMV INTERFREQBLKCELL

ADD INTERFREQBLKCELL
MOD INTERFREQBLKCELL
LST INTERFREQBLKCELL

ADD INTERFREQBLKCELL
MOD INTERFREQBLKCELL
LST INTERFREQBLKCELL

ADD EUTRANINTERFREQNCELL
DSP EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
RMV EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
DSP EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
RMV EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
DSP EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
RMV EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
DSP EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
RMV EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
DSP EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
RMV EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL
ADD EUTRANINTERFREQNCELL
MOD EUTRANINTERFREQNCELL
LST EUTRANINTERFREQNCELL

DSP EUTRANINTERFREQNCELL

DSP EUTRANINTERFREQNCELL
ADD EUTRANEXTERNALCELL
ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELLBAND
MOD EUTRANEXTERNALCELL
RMV EUTRANEXTERNALCELL
RMV
EUTRANEXTERNALCELLBAND

ADD EUTRANEXTERNALCELL
ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELLBAND
MOD EUTRANEXTERNALCELL
RMV EUTRANEXTERNALCELL
RMV
EUTRANEXTERNALCELLBAND

ADD EUTRANEXTERNALCELL
ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELLBAND
MOD EUTRANEXTERNALCELL
RMV EUTRANEXTERNALCELL
RMV
ADD EUTRANEXTERNALCELL
EUTRANEXTERNALCELLBAND
ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELLBAND
MOD EUTRANEXTERNALCELL
RMV EUTRANEXTERNALCELL
RMV
EUTRANEXTERNALCELLBAND
ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL
ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELLBAND
RMV
EUTRANEXTERNALCELLBAND

ADD
EUTRANEXTERNALCELLBAND
LST EUTRANEXTERNALCELLBAND
RMV
EUTRANEXTERNALCELLBAND
ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD EUTRANEXTERNALCELL
MOD EUTRANEXTERNALCELL
LST EUTRANEXTERNALCELL

ADD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
RMV CDMA2000BCSCELLOP

ADD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
RMV CDMA2000BCSCELLOP

ADD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
RMV CDMA2000BCSCELLOP
ADD CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP

ADD CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP

ADD CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP

ADD CDMA2000BCSCELLOP
MOD CDMA2000BCSCELLOP
LST CDMA2000BCSCELLOP

ADD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
RMV EUTRANNFREQRANSHARE

ADD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
RMV EUTRANNFREQRANSHARE

ADD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
RMV EUTRANNFREQRANSHARE
ADD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
RMV EUTRANNFREQRANSHARE

ADD EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE

ADD EUTRANNFREQRANSHARE
MOD EUTRANNFREQRANSHARE
LST EUTRANNFREQRANSHARE

ADD EUTRANNFREQSCELLOP
LST EUTRANNFREQSCELLOP
MOD EUTRANNFREQSCELLOP
RMV EUTRANNFREQSCELLOP
ADD EUTRANNFREQSCELLOP
LST EUTRANNFREQSCELLOP
MOD EUTRANNFREQSCELLOP
RMV EUTRANNFREQSCELLOP
ADD EUTRANNFREQSCELLOP
LST EUTRANNFREQSCELLOP
MOD EUTRANNFREQSCELLOP
RMV EUTRANNFREQSCELLOP

ADD EUTRANNFREQSCELLOP
MOD EUTRANNFREQSCELLOP
LST EUTRANNFREQSCELLOP
ADD EUTRANNFREQSCELLOP
MOD EUTRANNFREQSCELLOP
LST EUTRANNFREQSCELLOP

ADD GERANNFGROUPSCELLOP
LST GERANNFGROUPSCELLOP
MOD GERANNFGROUPSCELLOP
RMV GERANNFGROUPSCELLOP
ADD GERANNFGROUPSCELLOP
LST GERANNFGROUPSCELLOP
MOD GERANNFGROUPSCELLOP
RMV GERANNFGROUPSCELLOP
ADD GERANNFGROUPSCELLOP
LST GERANNFGROUPSCELLOP
MOD GERANNFGROUPSCELLOP
RMV GERANNFGROUPSCELLOP

ADD GERANNFGROUPSCELLOP
MOD GERANNFGROUPSCELLOP
LST GERANNFGROUPSCELLOP

ADD GERANNFGROUPSCELLOP
MOD GERANNFGROUPSCELLOP
LST GERANNFGROUPSCELLOP

ADD GERANRANSHARE
LST GERANRANSHARE
MOD GERANRANSHARE
RMV GERANRANSHARE

ADD GERANRANSHARE
LST GERANRANSHARE
MOD GERANRANSHARE
RMV GERANRANSHARE
ADD GERANRANSHARE
LST GERANRANSHARE
MOD GERANRANSHARE
RMV GERANRANSHARE

ADD GERANRANSHARE
LST GERANRANSHARE
MOD GERANRANSHARE
RMV GERANRANSHARE

ADD GERANRANSHARE
MOD GERANRANSHARE
LST GERANRANSHARE

ADD GERANRANSHARE
MOD GERANRANSHARE
LST GERANRANSHARE

ADD UTRANNCELL
DSP UTRANNCELL
DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO
LST UTRANNCELL
MOD UTRANNCELL
RMV UTRANNCELL

ADD UTRANNCELL
DSP UTRANNCELL
LST UTRANNCELL
MOD UTRANNCELL
RMV UTRANNCELL
DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO
ADD UTRANNCELL
DSP UTRANNCELL
LST UTRANNCELL
MOD UTRANNCELL
RMV UTRANNCELL
DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO

ADD UTRANNCELL
DSP UTRANNCELL
LST UTRANNCELL
MOD UTRANNCELL
RMV UTRANNCELL
DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO

ADD UTRANNCELL
DSP UTRANNCELL
LST UTRANNCELL
MOD UTRANNCELL
RMV UTRANNCELL
DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO

ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

LST UTRANNCELL
ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL
ADD UTRANNCELL
LST UTRANNCELL
ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL
ADD UTRANNCELL
MOD UTRANNCELL
LST UTRANNCELL

DSP UTRANRIMINFO
DSP UTRANRIMLOADINFO

DSP UTRANRIMINFO

DSP UTRANRIMINFO

DSP UTRANRIMLOADINFO

DSP UTRANRIMLOADINFO

DSP UTRANRIMLOADINFO

ADD UTRANNFREQSCELLOP
LST UTRANNFREQSCELLOP
MOD UTRANNFREQSCELLOP
RMV UTRANNFREQSCELLOP
ADD UTRANNFREQSCELLOP
LST UTRANNFREQSCELLOP
MOD UTRANNFREQSCELLOP
RMV UTRANNFREQSCELLOP
ADD UTRANNFREQSCELLOP
LST UTRANNFREQSCELLOP
MOD UTRANNFREQSCELLOP
RMV UTRANNFREQSCELLOP
ADD UTRANNFREQSCELLOP
MOD UTRANNFREQSCELLOP
LST UTRANNFREQSCELLOP

ADD UTRANNFREQSCELLOP
MOD UTRANNFREQSCELLOP
LST UTRANNFREQSCELLOP

ADD UTRANRANSHARE
LST UTRANRANSHARE
MOD UTRANRANSHARE
RMV UTRANRANSHARE

ADD UTRANRANSHARE
LST UTRANRANSHARE
MOD UTRANRANSHARE
RMV UTRANRANSHARE
ADD UTRANRANSHARE
LST UTRANRANSHARE
MOD UTRANRANSHARE
RMV UTRANRANSHARE

ADD UTRANRANSHARE
LST UTRANRANSHARE
MOD UTRANRANSHARE
RMV UTRANRANSHARE

ADD UTRANRANSHARE
MOD UTRANRANSHARE
LST UTRANRANSHARE

ADD UTRANRANSHARE
MOD UTRANRANSHARE
LST UTRANRANSHARE

ADD UTRANNFREQ
LST UTRANNFREQ
MOD UTRANNFREQ
RMV UTRANNFREQ
ADD UTRANNFREQ
LST UTRANNFREQ
MOD UTRANNFREQ
RMV UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ
ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANNFREQ
MOD UTRANNFREQ
LST UTRANNFREQ

ADD UTRANEXTERNALCELL
ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELL
LST UTRANEXTERNALCELLBAND
MOD UTRANEXTERNALCELL
RMV UTRANEXTERNALCELL
RMV UTRANEXTERNALCELLBAND

ADD UTRANEXTERNALCELL
ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELL
LST UTRANEXTERNALCELLBAND
MOD UTRANEXTERNALCELL
RMV UTRANEXTERNALCELL
RMV UTRANEXTERNALCELLBAND

ADD UTRANEXTERNALCELL
ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELL
LST UTRANEXTERNALCELLBAND
MOD UTRANEXTERNALCELL
RMV UTRANEXTERNALCELL
RMV UTRANEXTERNALCELLBAND
ADD UTRANEXTERNALCELL
ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELL
LST UTRANEXTERNALCELLBAND
MOD UTRANEXTERNALCELL
RMV UTRANEXTERNALCELL
RMV UTRANEXTERNALCELLBAND

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL
ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL
ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL
ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL
ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELLBAND
RMV UTRANEXTERNALCELLBAND

ADD UTRANEXTERNALCELLBAND
LST UTRANEXTERNALCELLBAND
RMV UTRANEXTERNALCELLBAND
ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD UTRANEXTERNALCELL
MOD UTRANEXTERNALCELL
LST UTRANEXTERNALCELL

ADD BBPCOLLABORATEGRP
BLK BBPCOLLABORATEGRP
DSP BBPCOLLABORATEGRP
LST BBPCOLLABORATEGRP
MOD BBPCOLLABORATEGRP
RMV BBPCOLLABORATEGRP
UBL BBPCOLLABORATEGRP

ADD BBPCOLLABORATEGRP
MOD BBPCOLLABORATEGRP
LST BBPCOLLABORATEGRP
DSP BBPCOLLABORATEGRP

DSP BBPCOLLABORATEGRP

DSP BBPCOLLABORATEGRP

DSP BBPCOLLABORATEGRP
DSP BBPCOLLABORATEGRP

DSP BBPCOLLABORATEGRP

BLK BBPCOLLABORATEGRP
ADD BBPCOLLABORATEGRP
MOD BBPCOLLABORATEGRP
LST BBPCOLLABORATEGRP
ADD BBPCOLLABORATEGRP
MOD BBPCOLLABORATEGRP
LST BBPCOLLABORATEGRP

BLK BBPCOLLABORATEGRP
MOD ENODEBALMCFG
LST ENODEBALMCFG

MOD ENODEBALMCFG
LST ENODEBALMCFG
MOD ENODEBFRAMEOFFSET
LST ENODEBFRAMEOFFSET

MOD ENODEBFRAMEOFFSET
LST ENODEBFRAMEOFFSET

MOD EUCOSCHCFG
LST EUCOSCHCFG
MOD EUCOSCHCFG
LST EUCOSCHCFG

MOD EUCOSCHDLCOMPCFG
LST EUCOSCHDLCOMPCFG

MOD EUCOSCHDLCOMPCFG
LST EUCOSCHDLCOMPCFG
MOD EUCOSCHDLCOMPCFG
LST EUCOSCHDLCOMPCFG

MOD EUCOSCHDLCOMPCFG
LST EUCOSCHDLCOMPCFG

MOD FDDRESMODE
LST FDDRESMODE
MOD FDDRESMODE
LST FDDRESMODE

MOD FDDRESMODE
LST FDDRESMODE

LST LIOPTATOMRULE
MOD LIOPTATOMRULE

LST LIOPTATOMRULE
LST LIOPTATOMRULE

MOD LIOPTATOMRULE
LST LIOPTATOMRULE

LST LIOPTATOMRULE

LST LIOPTFEATURE

LST LIOPTFEATURE
DSP LIOPTFUNCTION
LST LIOPTFUNCTION

DSP LIOPTFUNCTION
LST LIOPTFUNCTION

DSP LIOPTFUNCTION
LST LIOPTFUNCTION

LST LIOPTFUNCTION

DSP LIOPTFUNCTION

DSP LIOPTFUNCTION
ACT LIOPTRULE
DEA LIOPTRULE
DSP LIOPTRULE
LST LIOPTRULE
MOD LIOPTRULE

DSP LIOPTRULE

DSP LIOPTRULE
LST LIOPTRULE

DSP LIOPTRULE
LST LIOPTRULE

MOD LIOPTRULE
DSP LIOPTRULE
LST LIOPTRULE

DSP LIOPTRULE
LST LIOPTRULE

DSP LIOPTRULE
LST LIOPTRULE
MOD LIOPTRULE
DSP LIOPTRULE
LST LIOPTRULE

MOD LIOPTRULE
DSP LIOPTRULE
LST LIOPTRULE

DSP LIOPTRULE
LST LIOPTRULE

DSP LIOPTRULE

LST LIOPTRULEMEMBER
MOD LIOPTRULEMEMBER

LST LIOPTRULEMEMBER
MOD LIOPTRULEMEMBER

MOD LIOPTRULEMEMBER
LST LIOPTRULEMEMBER

ADD NCELLPLMNLIST
LST NCELLPLMNLIST
MOD NCELLPLMNLIST
RMV NCELLPLMNLIST
ADD NCELLPLMNLIST
LST NCELLPLMNLIST
MOD NCELLPLMNLIST
RMV NCELLPLMNLIST
ADD NCELLPLMNLIST
LST NCELLPLMNLIST
MOD NCELLPLMNLIST
RMV NCELLPLMNLIST

ADD NCELLPLMNLIST
MOD NCELLPLMNLIST
LST NCELLPLMNLIST

ADD PCCFREQCFG
DSP PCCSCELLLIST
LST PCCFREQCFG
MOD PCCFREQCFG
RMV PCCFREQCFG

ADD PCCFREQCFG
MOD PCCFREQCFG
LST PCCFREQCFG
ADD PCCFREQCFG
MOD PCCFREQCFG
LST PCCFREQCFG

ADD PCCFREQCFG
MOD PCCFREQCFG
LST PCCFREQCFG

ADD PIMCELLGROUP
DSP PIMCELLGROUP
LST PIMCELLGROUP
RMV PIMCELLGROUP

ADD PIMCELLGROUP
DSP PIMCELLGROUP
LST PIMCELLGROUP

ADD PIMCELLGROUP
DSP PIMCELLGROUP
LST PIMCELLGROUP

ADD PIMCELLGROUP
DSP PIMCELLGROUP
LST PIMCELLGROUP
ADD PIMCELLGROUP
DSP PIMCELLGROUP
LST PIMCELLGROUP

DSP PIMCELLGROUP

DSP PIMCELLGROUP

ADD SCCFREQCFG
LST SCCFREQCFG
MOD SCCFREQCFG
RMV SCCFREQCFG

ADD SCCFREQCFG
LST SCCFREQCFG
MOD SCCFREQCFG
RMV SCCFREQCFG
ADD SCCFREQCFG
MOD SCCFREQCFG
LST SCCFREQCFG

ADD SCCFREQCFG
MOD SCCFREQCFG
LST SCCFREQCFG

ADD SCCFREQCFG
MOD SCCFREQCFG
LST SCCFREQCFG
MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD SERVICEDIFFSETTING
LST SERVICEDIFFSETTING

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR

MOD ANR
LST ANR
MOD ANR
LST ANR

MOD ANR
LST ANR

MOD NCELLCLASSMGT
LST NCELLCLASSMGT
MOD NCELLCLASSMGT
LST NCELLCLASSMGT

ADD BFANT
DSP BFANT
LST BFANT
MOD BFANT
RMV BFANT
DSP BFANTDB
ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT
ADD BFANT
MOD BFANT
DSP BFANT
DSP BFANTDB
LST BFANT

ADD BFANT
MOD BFANT
LST BFANT

ADD BFANT
MOD BFANT
LST BFANT

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB
DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB

DSP BFANT
DSP BFANTDB
DSP BFANT
DSP BFANTDB

MOD BLINDNCELLOPT
LST BLINDNCELLOPT

MOD BLINDNCELLOPT
LST BLINDNCELLOPT

MOD BLINDNCELLOPT
LST BLINDNCELLOPT

MOD BLINDNCELLOPT
LST BLINDNCELLOPT

MOD BLINDNCELLOPT
LST BLINDNCELLOPT

MOD BLINDNCELLOPT
LST BLINDNCELLOPT
ADD IPSERVICEQOS
LST IPSERVICEQOS
MOD IPSERVICEQOS
RMV IPSERVICEQOS

ADD IPSERVICEQOS
MOD IPSERVICEQOS
LST IPSERVICEQOS

ADD IPSERVICEQOS
MOD IPSERVICEQOS
LST IPSERVICEQOS

ADD IPSERVICEQOS
MOD IPSERVICEQOS
LST IPSERVICEQOS

ADD IPSERVICEQOS
MOD IPSERVICEQOS
LST IPSERVICEQOS

ADD IPSERVICEQOS
MOD IPSERVICEQOS
LST IPSERVICEQOS

MOD QOEHOCOMMONCFG
LST QOEHOCOMMONCFG
MOD QOEHOCOMMONCFG
LST QOEHOCOMMONCFG

ADD QOSPOLICY
LST QOSPOLICY
MOD QOSPOLICY
RMV QOSPOLICY

ADD QOSPOLICY
MOD QOSPOLICY
LST QOSPOLICY
ADD QOSPOLICY
MOD QOSPOLICY
LST QOSPOLICY

ADD QOSPOLICY
MOD QOSPOLICY
LST QOSPOLICY

ADD QOSPOLICY
MOD QOSPOLICY
LST QOSPOLICY
ADD CAGROUP
LST CAGROUP
MOD CAGROUP
RMV CAGROUP

ADD CAGROUP
MOD CAGROUP
LST CAGROUP
ADD CAGROUP
MOD CAGROUP
LST CAGROUP

ADD CAGROUPCELL
DSP CAGROUPCELL
LST CAGROUPCELL
MOD CAGROUPCELL
RMV CAGROUPCELL

ADD CAGROUPCELL
LST CAGROUPCELL
MOD CAGROUPCELL
RMV CAGROUPCELL
DSP CAGROUPCELL
ADD CAGROUPCELL
LST CAGROUPCELL
MOD CAGROUPCELL
RMV CAGROUPCELL
DSP CAGROUPCELL

ADD CAGROUPCELL
MOD CAGROUPCELL
LST CAGROUPCELL
ADD CAGROUPCELL
MOD CAGROUPCELL
LST CAGROUPCELL

ADD CAGROUPCELL
MOD CAGROUPCELL
LST CAGROUPCELL

DSP CAGROUPCELL

DSP CAGROUPCELL
DSP CAGROUPCELL

DSP CAGROUPCELL

DSP CAGROUPCELL

MOD CELLIDPRDUPT
LST CELLIDPRDUPT

MOD CELLIDPRDUPT
LST CELLIDPRDUPT

MOD CELLIDPRDUPT
LST CELLIDPRDUPT

MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA
MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA
MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA
MOD CSPCALGOPARA
LST CSPCALGOPARA

MOD CSPCALGOPARA
LST CSPCALGOPARA

ADD ENODEBUSSERVERCFG
LST ENODEBUSSERVERCFG
MOD ENODEBUSSERVERCFG
RMV ENODEBUSSERVERCFG

ADD ENODEBUSSERVERCFG
MOD ENODEBUSSERVERCFG
LST ENODEBUSSERVERCFG

ADD ENODEBUSSERVERCFG
MOD ENODEBUSSERVERCFG
LST ENODEBUSSERVERCFG

ADD ENODEBUSSERVERCFG
MOD ENODEBUSSERVERCFG
LST ENODEBUSSERVERCFG

ADD EUTRANSPEPCICELL
LST EUTRANSPEPCICELL
MOD EUTRANSPEPCICELL
RMV EUTRANSPEPCICELL
ADD EUTRANSPEPCICELL
LST EUTRANSPEPCICELL
MOD EUTRANSPEPCICELL
RMV EUTRANSPEPCICELL
ADD EUTRANSPEPCICELL
MOD EUTRANSPEPCICELL
LST EUTRANSPEPCICELL

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH

MOD ENODEBALGOSWITCH
LST ENODEBALGOSWITCH
MOD ENODEBMLB
LST ENODEBMLB
MOD ENODEBMLB
LST ENODEBMLB
MOD ENODEBMLB
LST ENODEBMLB
MOD ENODEBMLB
LST ENODEBMLB

MOD ENODEBMLB
LST ENODEBMLB

MOD LICRATIO
LST LICRATIO

MOD LICRATIO
LST LICRATIO
ADD LICRATIOSHAREPOLICY
LST LICRATIOSHAREPOLICY
MOD LICRATIOSHAREPOLICY
RMV LICRATIOSHAREPOLICY

ADD LICRATIOSHAREPOLICY
MOD LICRATIOSHAREPOLICY
LST LICRATIOSHAREPOLICY

ADD LICRATIOSHAREPOLICY
MOD LICRATIOSHAREPOLICY
LST LICRATIOSHAREPOLICY

MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO

MOD MRO
LST MRO
MOD MRO
LST MRO
MOD MRO
LST MRO
MOD MRO
LST MRO
MOD MRO
LST MRO
MOD MRO
LST MRO

LST SIMULOAD
MOD SIMULOAD

MOD SIMULOAD
LST SIMULOAD

MOD SIMULOAD
LST SIMULOAD

MOD SIMULOAD
LST SIMULOAD

MOD SIMULOAD
LST SIMULOAD
MOD SIMULOAD
LST SIMULOAD

MOD TCPACKCTRLALGO
LST TCPACKCTRLALGO

MOD TCPACKCTRLALGO
LST TCPACKCTRLALGO
MOD TCPACKCTRLALGO
LST TCPACKCTRLALGO

MOD TCPMSSCTRL
LST TCPMSSCTRL

MOD TCPMSSCTRL
LST TCPMSSCTRL
None

MOD TDDRESMODESW
LST TDDRESMODESW
MOD TDDRESMODESW
LST TDDRESMODESW

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO
MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO

MOD TPEALGO
LST TPEALGO
MOD TPEALGO
LST TPEALGO

MOD VQMALGO
LST VQMALGO

MOD VQMALGO
LST VQMALGO

MOD VQMALGO
LST VQMALGO

MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO

MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO
MOD VQMALGO
LST VQMALGO

SET ENBLICENSEALMTHD
LST ENBLICENSEALMTHD

SET ENBLICENSEALMTHD
LST ENBLICENSEALMTHD

SET ENBLICENSEALMTHD
LST ENBLICENSEALMTHD

SET ENBLICENSEALMTHD
LST ENBLICENSEALMTHD
MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA
MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENBRSVDPARA
LST ENBRSVDPARA

MOD ENODEBAUTOPOWEROFF
LST ENODEBAUTOPOWEROFF

MOD ENODEBAUTOPOWEROFF
LST ENODEBAUTOPOWEROFF
MOD ENODEBAUTOPOWEROFF
LST ENODEBAUTOPOWEROFF

DSP ENODEBAUTOPOWEROFF
MOD ENODEBFLOWCTRLPARA
LST ENODEBFLOWCTRLPARA
MOD ENODEBFLOWCTRLPARA
LST ENODEBFLOWCTRLPARA
MOD ENODEBFLOWCTRLPARA
LST ENODEBFLOWCTRLPARA

MOD ENODEBFLOWCTRLPARA
LST ENODEBFLOWCTRLPARA
 Meaning IsKey

Indicates the index of the operator. YES

Indicates the extended QoS Class Identifier (QCI), which is required by

YES
the operator for user differentiation.

Indicates the ID of the service-based inter-RAT handover policy group. NO

Indicates the ID of the service-based inter-frequency handover policy

NO
group.

Indicates the ID of the operator. YES

Indicates the priorities of E-UTRAN TDD and E-UTRAN FDD. To

prioritize E-UTRAN TDD and E-UTRAN FDD, set this parameter to
NO
EUTRAN_TDD or EUTRAN_FDD. To treat E-UTRAN TDD and E-
UTRAN FDD equally, set this parameter to EUTRAN.
Indicates the priorities of E-UTRAN TDD and E-UTRAN FDD. To
prioritize E-UTRAN TDD or E-UTRAN FDD, set this parameter to
EUTRAN_TDD or EUTRAN_FDD. If the FirstRatPri parameter is set to NO
EUTRAN, the SecondRatPri parameter must be set to NULL, indicating
that E-UTRAN TDD and E-UTRAN FDD are not prioritized.

Indicates the offset of the RSRP threshold for LTE TDD inter-frequency
measurement event A2 relative to the RSRP threshold for inter-
frequency measurement event A2 (which is specified by
InterFreqHoA2ThdRsrp). If TddIfHoA2ThdRsrpOffset and
FddIfHoA2ThdRsrpOffset are set to the same value (excluding the value
-100), LTE TDD measurement and LTE FDD measurement are not
prioritized, and the RSRP threshold delivered by the eNodeB is the sum
of the value of TddIfHoA2ThdRsrpOffset or FddIfHoA2ThdRsrpOffset
and the RSRP threshold for inter-frequency measurement event A2. If NO
both TddIfHoA2ThdRsrpOffset and FddIfHoA2ThdRsrpOffset are set to
-100, LTE TDD measurement and LTE FDD measurement are not
prioritized, and the RSRP threshold delivered by the eNodeB is the
RSRP threshold for inter-frequency measurement event A2.
If only TddIfHoA2ThdRsrpOffset is set to -100, LTE TDD measurement is
not performed and the RSRP threshold delivered by the eNodeB is the
sum of the value of FddIfHoA2ThdRsrpOffset and the RSRP threshold
for inter-frequency measurement event A2.

Indicates the offset of the RSRP threshold for LTE FDD inter-frequency
measurement event A2 relative to the RSRP threshold for inter-
frequency measurement event A2 (which is specified by
InterFreqHoA2ThdRsrp). If TddIfHoA2ThdRsrpOffset and
FddIfHoA2ThdRsrpOffset are set to the same value (excluding the value
-100), LTE TDD measurement and LTE FDD measurement are not
prioritized, and the RSRP threshold delivered by the eNodeB is the sum
of the value of TddIfHoA2ThdRsrpOffset or FddIfHoA2ThdRsrpOffset
and the RSRP threshold for inter-frequency measurement event A2. If NO
both TddIfHoA2ThdRsrpOffset and FddIfHoA2ThdRsrpOffset are set to
-100, LTE TDD measurement and LTE FDD measurement are not
prioritized, and the RSRP threshold delivered by the eNodeB is the
RSRP threshold for inter-frequency measurement event A2.
If only FddIfHoA2ThdRsrpOffset is set to -100, LTE FDD measurement is
not performed and the RSRP threshold delivered by the eNodeB is the
sum of the value of TddIfHoA2ThdRsrpOffset and the RSRP threshold
for inter-frequency measurement event A2.
Indicates the offset of the RSRP threshold for UTRAN inter-RAT
handover event A2 relative to the RSRP threshold for inter-RAT
handover event A2 (which is specified by InterRatHoA2ThdRsrp). If the
value of UtranA2ThdRsrpOffset and that of GeranA2ThdRsrpOffset are
identical (excluding the value -100), UTRAN measurement and GERAN
measurement are not prioritized, and the RSRP threshold delivered by
the eNodeB is the sum of the value of this parameter and the RSRP
threshold for inter-RAT measurement event A2. If both
NO
UtranA2ThdRsrpOffset and GeranA2ThdRsrpOffset are set to -100,
UTRAN measurement and GERAN measurement are not prioritized, and
the RSRP threshold delivered by the eNodeB is the RSRP threshold for
inter-RAT measurement event A2. If only UtranA2ThdRsrpOffset is set to
-100, UTRAN measurement is not performed and the RSRP threshold
delivered by the eNodeB is the sum of the value of
GeranA2ThdRsrpOffset and the RSRP threshold for inter-RAT
measurement event A2.

Indicates the offset of the RSRP threshold for GERAN inter-RAT

handover event A2 relative to the RSRP threshold for inter-RAT
handover event A2 (which is specified by InterRatHoA2ThdRsrp). If the
value of UtranA2ThdRsrpOffset and that of GeranA2ThdRsrpOffset are
identical (excluding the value -100), UTRAN measurement and GERAN
measurement are not prioritized, and the RSRP threshold delivered by
the eNodeB is the sum of the value of this parameter and the RSRP
threshold for inter-RAT measurement event A2. If both
NO
UtranA2ThdRsrpOffset and GeranA2ThdRsrpOffset are set to -100,
UTRAN measurement and GERAN measurement are not prioritized, and
the RSRP threshold delivered by the eNodeB is the RSRP threshold for
inter-RAT measurement event A2. If only GeranA2ThdRsrpOffset is set
to -100, GERAN measurement is not performed and the RSRP threshold
delivered by the eNodeB is the sum of the value of
UtranA2ThdRsrpOffset and the RSRP threshold for inter-RAT
measurement event A2.

Indicates whether the eNodeB checks the CS+PS handover capability of

external UTRAN cells when initiating SRVCC for concurrent CS and PS
services. If this parameter is set to ON(On), the eNodeB does not check
NO
the capability indicated by the setting of the CsPsHOInd parameter in the
UtranExternalCell MOs. If this parameter is set to OFF(Off), the eNodeB
needs to check this capability.

This parameter indicates the ID of the operator. YES

Indicates the dedicated SPID for an operator.Operators can define the
RatFreqPriorityGroupId MO corresponding to the dedicated SPID. Each YES
operator can be configured with a maximum of 256 dedicated SPIDs.

Indicates whether to set a RAT/frequency priority. If this parameter is set

to CFG, UEs preferentially camp on the RAT or frequency. If this
NO
parameter is set to NOT_CFG, UEs do not preferentially camp on the
RAT or frequency.

Indicates the ID of a RAT/frequency priority group. NO

Indicates the index of the operator. YES

Indicates the QoS Class Identifier (QCI) of an EPS bearer. Different QCIs
represent different QoS specifications such as the packet delay budget,
YES
packet error loss rate, and resource type (whether the service is a GBR
service or not). For details, see Table 6.1.7 in 3GPP TS 23.203.
Indicates the ID of the service-based inter-RAT handover policy group. NO

Indicates the ID of the service-based inter-frequency handover policy

NO
group.

Indicates the bearer policy for service-based handovers.

If the ServiceBasedInterFreqHoSwitch, UtranServiceHoSwitch,
GeranServiceHoSwitch, CdmaHrpdServiceHoSwitch,
Cdma1xRttServiceHoSwitch, or ServiceReqInterFreqHoSwitch option is
selected, and a UE fails to be handed over to the target eNodeB, the
source eNodeB reads the ServiceHoBearerPolicy parameter value for
each QCI of bearers. If the value is
SERVICE_HO_QCI_NOT_ALLOWED(QCI Bear Not Allowed), the
eNodeB removes the bearers with the corresponding QCI. If the value is
SERVICE_HO_QCI_ALLOWED(QCI Bear Allowed), the eNodeB does
not remove the bearers with the corresponding QCI.
If the ServiceBasedInterFreqHoSwitch, UtranServiceHoSwitch, NO
GeranServiceHoSwitch, CdmaHrpdServiceHoSwitch,
Cdma1xRttServiceHoSwitch, or ServiceReqInterFreqHoSwitch option is
selected, and an incoming handover is triggered, the target eNodeB
reads the ServiceHoBearerPolicy parameter value for each QCI of
bearers. If this parameter is set to
SERVICE_HO_QCI_NOT_ALLOWED(QCI Bear Not Allowed), the target
eNodeB sends a handover preparation failure message to the source
eNodeB and rejects the handover request. If this parameter is set to
SERVICE_HO_QCI_ALLOWED(QCI Bear Allowed), the target eNodeB
does not reject the handover request.
This parameter applies only to LTE TDD.

Indicates the index of the operator. YES

Indicates the highest-priority RAT for handovers. It is UTRAN by default.
If this parameter is set to UTRAN, GERAN, or CDMA2000, the highest-
priority RAT is UTRAN, GERAN, or CDMA2000, respectively. NO
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.
Indicates the medium-priority RAT for handovers. It is GERAN by default.
If this parameter is set to UTRAN, GERAN, or CDMA2000, the medium-
priority RAT is UTRAN, GERAN, or CDMA2000, respectively. If this
parameter is set to NULL, no medium-priority RAT is specified and only NO
the highest-priority RAT can be selected for handovers.
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.
Indicates the lowest-priority RAT for handovers. It is CDMA2000 by
default. If this parameter is set to UTRAN, GERAN, or CDMA2000, the
lowest-priority RAT is UTRAN, GERAN, or CDMA2000, respectively. If
this parameter is set to NULL, no lowest-priority RAT is specified and NO
only the highest- or medium-priority RAT can be selected for handovers.
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.

Indicates the LCS capability of the UTRAN. If this parameter is set to

ON, the UTRAN supports LCS. If this parameter is set to OFF, the NO
UTRAN does not support LCS.

Indicates the LCS capability of the GERAN. If this parameter is set to

ON, the GERAN supports LCS. If this parameter is set to OFF, the NO
GERAN does not support LCS.

Indicates the LCS capability of the CDMA2000. If this parameter is set to

ON, the CDMA2000 supports LCS. If this parameter is set to OFF, the NO
CDMA2000 does not support LCS.
Indicates the highest-priority RAT for CSFB initiated by a UE in idle
mode. It is UTRAN by default. If this parameter is set to UTRAN,
GERAN, or CDMA2000, the highest-priority RAT is UTRAN, GERAN, or
NO
CDMA2000, respectively.
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.

Indicates the medium-priority RAT for CSFB initiated by a UE in idle

mode. It is GERAN by default. If this parameter is set to UTRAN,
GERAN, or CDMA2000, the medium-priority RAT is UTRAN, GERAN, or
CDMA2000, respectively. If this parameter is set to NULL, no medium-
NO
priority RAT is specified and only the highest-priority RAT can be
selected for CSFB initiated by a UE in idle mode.
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.
Indicates the lowest-priority RAT for CSFB initiated by a UE in idle mode.
It is CDMA2000 by default. If this parameter is set to UTRAN, GERAN,
or CDMA2000, the lowest-priority RAT is UTRAN, GERAN, or
CDMA2000, respectively. If this parameter is set to NULL, no lowest-
NO
priority RAT is specified and only the highest- or medium-priority RAT
can be selected for CSFB initiated by a UE in idle mode.
The value CDMA2000 is invalid in the current version. Therefore, avoid
setting this parameter to CDMA2000.

Indicates whether the eNodeB selects the target frequency in a round

robin (RR) manner from frequencies with the same priority in blind
redirections for CSFB to UTRAN. If this parameter is set to ON(On), the NO
function of target frequency selection in an RR manner is enabled. If this
parameter is set to OFF(Off), this function is disabled.

Indicates the CSFB policy for a UE in connected mode. If the CSFB

steering function is disabled, this parameter also applies to UEs in idle NO
mode. The policy can be PS handover, CCO, or redirection.

Indicates the CSFB policy for a UE in idle mode. The policy can be PS
NO
handover, CCO, or redirection.
Indicates whether allocation/retention priorities (ARPs) can be configured
for CSFB services triggered by common calls. For details about ARPs, NO
see 3GPP TS 23.401.

Indicates the allocation/retention priority (ARP) of a CSFB service

triggered by a common call. When this parameter is set to 1, the service
NO
priority is the same as that of an emergency call. For details about the
ARP, see 3GPP TS 23.401.

Indicates the mobile country code (MCC) of a target eNodeB.

A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
The MCC consists of three digits. YES
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the mobile network code (MNC) of a target eNodeB.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
The MCC consists of three digits. YES
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the tracking area code (TAC), which is used by the EPC to
determine the area within which paging messages are sent. One tracking
area is comprised of one or more cells. Two TAC values 0x0000(0) and
YES
0xFFFE(65534) are reserved according to the protocol and will not be
used in future versions. Therefore, do not use 0 or 65534 as a TAC value
in TAC planning or configuration.

Indicates the index of the operator. YES

Indicates the mobile country code of the target PLMN. YES

Indicates the mobile network code of the target PLMN. YES

Indicates the ID of the RAT/frequency priority group. YES

Indicates the Radio Access Technology (RAT). YES

Indicates the downlink frequency. In CDMA2000, this parameter

indicates the bandclass. Before configuring a priority for a frequency
YES
specified by this parameter, ensure that an external or local cell
operating on this frequency has been configured.

Indicates the priority of the intra-RAT frequency band or frequency. The

value 0 indicates the lowest priority. The value of this parameter must be
determined together with the priorities of other frequencies during the NO
network planning. Cell reselection priorities in different RATs cannot be
the same.

Indicates the GERAN frequency band. NO

Indicates the ID of the operator. YES

Indicates the ID of the service-based inter-frequency handover policy

YES
group.

Indicates the index of a DL EARFCN in a DL EARFCN group for service-

YES
based inter-frequency handover.

Indicates a DL EARFCN for service-based inter-frequency handover.

Only the value with DlEarfcnIndex 0 in the DL EARFCN group is valid for
NO
LTE FDD cells. All values of this parameter are valid and have the same
priority for LTE TDD cells.

Indicates the priority of the frequency as the target frequency for service-
based inter-frequency handovers. A larger value indicates a higher
priority. When evaluating service-based inter-frequency handovers, the
eNodeB selects the neighboring E-UTRAN frequency with the highest NO
priority for measurements. If several neighboring E-UTRAN frequencies
have the same priority, these frequencies are selected as candidate
frequencies.

Indicates the ID of the operator. YES

Indicates the ID of the service-based inter-frequency handover policy

YES
group.
Indicates whether to allow service-based inter-frequency handovers of
the policy group to a specified frequency. If this parameter is set to
NO_HO, service-based inter-frequency handovers of this policy group to NO
a specified frequency are not allowed. If this parameter is set to
PERMIT_HO, such handovers are allowed.

Indicates the frequency to which a service with a specified QCI is

preferentially handed over during a service-based inter-frequency
handover. The parameter does not take effect after the setting and this NO
parameter will be deleted in later versions. The frequency can be added
by running the ADD SERVICEIFDLEARFCNGRP command.

Indicates the service-based inter-frequency A4 measurement report

waiting timer. If the inter-frequency measurement is triggered due to
service- or service request-based inter-frequency handover, the time for
a UE performing inter-frequency measurement must be restricted. This
NO
prevents the UE from performing repeated GAP measurements when it
does not receive measurement reports in a period, ensuring that data
transmission will not be affected. This parameter is dedicated to LTE
TDD cells.
Indicates the hysteresis for service-based inter-frequency event A4.
When the UE detects that the signal quality in the serving cell and that in
at least one inter-frequency neighboring cell meet the entering condition
for a service- or service request-based handover, it does not immediately
send a measurement report to the eNodeB. Instead, the UE sends a
report only when the signal quality meets the entering condition NO
throughout the hysteresis.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers, and the number of
incorrect handovers, preventing unnecessary handovers.
This parameter is dedicated to LTE TDD cells.

Indicates the index of the operator. YES

Indicates the ID of the service-based inter-RAT handover policy group. YES

Indicates whether service-based inter-RAT handovers are forbidden,

allowed, or required for services with the QCI. If this parameter is set to
NO_HO, service-based inter-RAT handovers of this policy group are
NO
forbidden. If this parameter is set to PERMIT_HO, such handovers are
allowed but not proactively initiated. If this parameter is set to
MUST_HO, such handovers must be initiated.
Indicates the mode of a service-based inter-RAT handover
measurement. When conditions for delivering both the service-based
inter-frequency handover and service-based inter-RAT handover
measurements are met, the eNodeB delivers the configuration for
service-based inter-frequency handover measurement if the following
requirements are met: InterRatHoState of at least one bearer of the UE
is set to MUST_HO. ServiceIrMeasMode is set to SERVIC_IR_MEAS_ NO
ORDER. After the service-based inter-frequency handover measurement
times out, the eNodeB delivers the configuration for service-based inter-
RAT handover measurement. If any of the preceding requirements are
not met, the eNodeB delivers the configuration for service-based inter-
RAT handover measurement. This parameter is dedicated to LTE TDD
cells.

Indicates the subscriber profile ID (SPID). YES

Indicates whether to use normal or special DRX. If this parameter is set

to TRUE, ordinary DRX parameters are applied to UEs with the SPID. If
NO
this parameter is set to FALSE, special DRX parameters are applied to
UEs with the SPID.
Indicates whether to set the priority for the intra-RAT frequency group. If
this parameter is set to CFG(CFG), UEs select the target frequency
based on the priority setting. If this parameter is set to NO
NOT_CFG(NOT_CFG), UEs do not select the target frequency based on
the priority setting.

Indicates the ID of the intra-RAT frequency priority group. NO

Indicates whether to support preallocation. If this parameter is set to

TRUE and PreAllocationSwitch under the UlSchSwitch parameter in the
NO
CellAlgoSwitch MO is set to On, resources can be preallocated to UEs.
Otherwise, resources are not preallocated to UEs.

Indicates whether to enable or disable inter-frequency load balancing for

the SPID. The values TRUE or FALSE indicate that inter-frequency load NO
balancing is allowed or prohibited for UEs with the SPID, respectively.
Indicates whether to enable or disable inter-RAT load sharing for the
SPID. The values TRUE or FALSE indicate that inter-RAT load sharing is NO
allowed or prohibited for UEs with the SPID, respectively.

Indicates whether to allow SPID-based handovers back to the home

public land mobile network (HPLMN). If this parameter is set to
TRUE(TRUE), a roaming UE can be handed over to the HPLMN network
NO
when it moves back to the coverage of the HPLMN network based on
the SPID. If this parameter is set to FALSE(FALSE), this UE cannot be
handed over to the HPLMN network based on the SPID.

Indicates the start value of the SPID segment. YES

Indicates the end value of the SPID segment. YES

Indicates the mobile country code (MCC) of the HPLMN to which SPID-
specific UEs are allowed to be handed over. A public land mobile
network (PLMN) ID is comprised of an MCC and a mobile network code
(MNC).
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the HPLMN to which SPID-
specific UEs are allowed to be handed over.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile country code (MCC) of a target radio network

controller (RNC).
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of a target radio network

controller (RNC).
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the RNC ID of the UTRAN cell. The 28-bit UTRAN cell ID is
comprised of the RNC cell ID and the RNC ID that are represented by
the least significant 16 bits and the most significant 12 bits, respectively.
The formula for calculating the UTRAN cell ID is as follows: UTRAN cell
YES
ID = RNC ID x 65536 + RNC cell ID. The value range of RNC ID is
(0~4095, 4294967295). 0~4095 indicates the actual RNC ID on the
network. 4294967295 indicates the special ID of all RNCs under the
same PLMN.

Indicates the UTRAN capabilities for an operator including PS handover

capability, capability of obtaining system information (SI) of the UTRAN
through RAN Information Management (RIM) procedures, VoIP
capability, and ultra-flash CSFB capability. If the MME, SGSN, or RNC of
the operator does not support PS handovers, RIM procedures, VoIP, or
ultra-flash CSFB, set this parameter to indicate the incapabilities. If this
parameter is not set, UTRAN capabilities are supported by default.
PsHoCapCfg: This option indicates whether PS handovers are
supported. If this option is selected, the UTRAN supports PS handovers.
If this option is deselected, the UTRAN does not support PS handovers.
SiByRimCapCfg: This option indicates whether the capability of obtaining
SI of the UTRAN through RIM procedures is supported. If the option is
selected, obtaining SI of the UTRAN through RIM procedures is
NO
supported. If the option is deselected, obtaining SI of the UTRAN
through RIM procedures is not supported.
VoipCapCfg: This option indicates the VoIP capability of the UTRAN. If
this option is selected, the VoIP is supported. VoIP services established
in the LTE network can be transferred to the UTRAN using PS
handovers so that UEs can perform voice services in the UTRAN. If this
option is deselected, the UTRAN does not support VoIP. Voice services
established in the LTE network cannot be transferred to the UTRAN
using PS handovers.
UltraFlashCsfbCapCfg: This option indicates the SRVCC capability. If
this option is selected, SRVCC is supported and voice services can
continue in the UTRAN by SRVCC. If this option is deselected, SRVCC
is not supported.

Indicates the ID of the operator. YES

Indicates the QoS class identifier (QCI) of an evolved packet system

(EPS) bearer. Different QCIs indicate different QoS requirements, such
YES
as the packet delay budget, packet error loss rate, and resource type.
For details, see Table 6.1.7 in 3GPP TS 23.203.
Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates the name of an eNodeB function, which uniquely identifies the
YES
eNodeB function.

Indicates the ID of the application referenced by an eNodeB function.

The application provides an operating environment for the eNodeB NO
function.

Indicates the eNodeB ID defined in the service protocol interface, which

uniquely identifies an eNodeB within a PLMN. For details, see 3GPP TS NO
36.300.

Indicates user-defined remarks. NO

Indicates model definition version of eNodeB resources, including the

management object (MO) definition, attribute definition, and configuration NO
rules.

Indicates the version of the product. This parameter is valid for version
NO
query.
Indicates the network identification code. The value of this parameter
can contain a maximum of seven dots (.).Modification to this parameter YES
takes effect at the next network access of a UE.

This parameter specifies the IP address of the primary DNS. NO

This parameter specifies the IP address of the secondary DNS. NO

Indicates the ID of the IP address pool corresponding to the APN. NO

Indicates the ID of an APN template. YES

Indicates the APN bound to the subscriber template. The value of this
parameter can contain a maximum of seven dots (.).Modification to this NO
parameter takes effect at the next network access of a UE.

Indicates an EPC-inside QoS attribute that is provided for a service data

flow (SDF) as a reference to a specific packet forwarding behavior (such
as packet loss rate and packet delay budget). The packet forwarding is NO
performed based on the QCI-related parameters that are pre-configured
on the access network node (such as the eNodeB).

Indicates the downlink aggregate maximum bit rate (AMBR) of the APN. NO

Indicates the uplink aggregate maximum bit rate (AMBR) of the APN. NO

Indicates a QoS attribute that specifies the relative importance compared

to other bearers for allocation and retention of the bearer. Modification to NO
this parameter takes effect at the next network access of a UE.

Indicates a QoS attribute that specifies whether bearers can occupy

resources for low-priority service data flows. Modification to this NO
parameter takes effect at the next network access of a UE.

Indicates a QoS attribute that controls whether resources for service

data flows can be occupied by high-priority service data flows.
NO
Modification to this parameter takes effect at the next network access of
a UE.

Indicates the local ID of the EPC-inside. YES

Indicates the ID of the MME group in the EPC-inside. NO

Indicates the code of the MME in the EPC-inside. NO

This parameter specifies the full name of a network service provider. NO

This parameter specifies the abbreviation for the name of a network

NO
service provider.

Indicates the algorithm that the EPC-inside preferentially selects to

encrypt NAS messages. For example, if this parameter is set to EEA2, NO
the EEA2 algorithm is preferentially selected to encrypt NAS messages.

Indicates the algorithm that the EPC-inside preferentially

selects to ensure NAS message integrity. If this parameter is set
NO
to EIA2, the EIA2 algorithm is preferentially selected to ensure NAS
message integrity.

This parameter specifies the ID of an IP address pool. YES

Indicates the start IP address. Modification to this parameter takes effect

NO
at the next network access of a UE.

Indicates the end IP address. Modification to this parameter takes effect

NO
at the next network access of a UE.

Indicates the mask of an address pool. Modification to this parameter

NO
takes effect at the next network access of a UE.

This parameter specifies the local ID of a subscriber. It uniquely identifies

YES
a subscriber within an eNodeB.

This parameter specifies the O&M IP address of an RRN. Modification to

NO
this parameter leads to network exit and reaccess of the RRN.
This parameter specifies the time when the software is activated. NO

This parameter specifies the destination IP address of the DHCP server.

The DHCP packets sent from the downstream base station to an RRN NO
are relayed to this destination IP address.

This parameter specifies the path where a file is saved on the FTP
server. If this parameter is not set, the default path configured for the
FTP server is used. The FTP server and the operating system on which
NO
the FTP server software runs determine whether an absolution or relative
path is supported and supported path formats. For details, see
"Example."

Indicates the destination IP address of the extended DHCP server. The

DHCP packets sent from the downstream eNodeB to an RRN are NO
relayed to this destination IP address.

This parameter specifies whether the RRN reports the download

NO
progress.

This parameter specifies the IP address of the FTP server. NO

This parameter specifies the password for logging in to the FTP server. NO

This parameter specifies the RRN reset mode. NO

This parameter specifies the software status:available or unavailable. NO

This parameter specifies the area where the software is stored. NO

This parameter specifies the RRN software version. NO

This parameter specifies the user name for logging in to the FTP server. NO
Indicates whether the RRN performs synchronous Ethernet clock
NO
broadcast.

Indicates the type of files stored in an RRN. NO

Indicates the local ID of a subscriber. It uniquely identifies a subscriber

YES
within an eNodeB.

Indicates the IP address of the LAN port on an RRN. YES

Indicates the subnet mask of the IP address of the LAN port on an RRN. NO

This parameter specifies the local ID of a subscriber. It uniquely identifies

YES
a subscriber within an eNodeB.

Indicates the transmission port number on the RRN. YES

Indicates the switch controlling the transmission port on the RRN. NO

This parameter specifies the ID of an IP route on an RRN. YES

This parameter specifies the local ID of a subscriber. It uniquely identifies

NO
a subscriber within an eNodeB.

This parameter specifies the destination IP address of the route from an

NO
RRN to the downstream base station.
This parameter specifies the subnet mask of the destination IP address
NO
of the route from an RRN to the downstream base station.

This parameter specifies the next-hop IP address of the route from an

NO
RRN to the downstream base station.

This parameter specifies the local ID of a subscriber. It uniquely identifies

YES
a subscriber within an eNodeB.

This parameter specifies the type of a subscriber. The value UE indicates

a subscriber using a UE. The value RRN indicates a subscriber using an
NO
RRN. Modification to this parameter takes effect at the next network
access of a UE.

Indicates the number that uniquely identifies a UE. It is stored on the SIM
card of the UE and sent to the eNodeB during network access.
NO
Modification to this parameter takes effect at the next network access of
a UE.

Indicates the ID that uniquely identifies an RRN. It is equivalent to the

IMSI. This ID is stored on the RRN, and sent to the eNodeB when the
NO
RRN accesses the network. Modification to this parameter takes effect at
the next network access of a UE.

This parameter specifies the ID of the cell serving an RRN. The

combination of this parameter and the eNodeB ID forms the E-UTRAN
cell identifier. The combination of the E-UTRAN cell identifier and the
NO
PLMN ID forms the E-UTRAN cell global identifier (ECGI). For details,
see 3GPP TS 36.413. Modification to this parameter takes effect at the
next network access of a UE.

This parameter specifies a key for subscriber authentication during

network access. Modification to this parameter takes effect at the next NO
network access of the subscriber.

This parameter is an input parameter involved in calculation for

subscriber authentication. Modification to this parameter takes effect at NO
the next network access of the subscriber.

This parameter specifies the uplink AMBR available for all the non-GBR
NO
bearers of a subscriber.
This parameter specifies the downlink AMBR available for all the non-
NO
GBR bearers of a subscriber.

Indicates the ID of the subscriber template bound to a subscriber.

Modification to this parameter takes effect at the next network access of NO
a UE.

This parameter provides the description about a subscriber, including the

functions and location.This parameter should be displayed and NO
configured only if the parameter SubscriberType is configured as RRN.

This parameter specifies the ID of a subscriber template. YES

Indicates the ID of an APN template. Modification to this parameter takes

NO
effect at the next network access of a UE.

This parameter specifies the name of a subscriber template. NO

Indicates whether the second PDN connection configured in the user

NO
template takes effect. This parameter applies only to LTE TDD cells.

Indicates the ID of the secondary APN template for second PDN

NO
connection configuration.

This parameter specifies the extended QCI of an E-UTRAN radio access

bearer (E-RAB) on an RRN. After the RRN successfully accesses the
network, a maximum of four extended QCIs, each of which corresponds YES
to an E-RAB, can be configured for the RRN based on the value of this
parameter.

This parameter specifies whether a bearer on an RRN is a default

NO
bearer. A maximum of one default bearer can be configured for an RRN.

This parameter specifies the ID of an RLC/PDCP parameter group. NO

This parameter specifies the scheduling type of an E-RAB on an RRN.
The value PQ indicates that the scheduling for a bearer is based on the
absolute priority. This scheduling type can be configured for a maximum
of one bearer. The value WFQ indicates that the fair scheduling for a
NO
bearer is based on the value of UlSchWeight or DlSchWeight. This
scheduling type can be configured for a maximum of three bearers. The
priority of a priority queuing (PQ) bearer is always higher than that of a
WFQ bearer.
This parameter indicates the uplink resource allocation weighting factor
for a weighted fair queuing (WFQ) bearer. This parameter is valid only NO
when the SchedulingType parameter is set to WFQ.

This parameter indicates the downlink resource allocation weighting

factor for a WFQ bearer. This parameter is valid only when the NO
SchedulingType parameter is set to WFQ.
This parameter specifies the lower limit of the DSCP value contained in
NO
the IP packets mapped to a bearer on an RRN.

This parameter specifies the upper limit of the DSCP value contained in
NO
the IP packets mapped to a bearer on an RRN.

Indicates the service preallocation weight of the RRN. If priority queuing

(PQ) is configured, the preallocation weight of services corresponding to
the PQ is used. Otherwise, the preallocation weight of services
corresponding to the largest weighted fair queuing (WFQ) is used. NO
Preallocation possibilities are proportional to preallocation weights.
When resources are limited, the preallocation weight affects the
preallocation possibilities for an RRN.
Indicates the hysteresis for the ANR-based intra-frequency measurement
event A3.
When the UE detects that the signal quality in the serving cell and that in
at least one intra-frequency neighboring cell meet the entering condition,
it does not immediately send an ANR-based measurement report to the
eNodeB. Instead, the UE sends a report only when the signal quality
NO
meets the entering condition throughout the hysteresis.
This parameter helps decrease the number of occasionally triggered
event reports and invalid decisions on triggering intra-frequency ANR.
This parameter must be set to a value smaller than or equal to that of the
IntraFreqHoA3TimeToTrig parameter.
In the current version, this parameter is dedicated to LTE TDD cells.
Indicates the hysteresis for the ANR-based intra-frequency measurement
event. This parameter is used to decrease the number of invalid
decisions on triggering intra-frequency ANR due to radio signal
NO
fluctuations. This parameter must be set to a value smaller than or equal
to that of the IntraFreqHoA3Hyst parameter.
In the current version, this parameter is dedicated to LTE TDD cells.

Indicates the offset for the signal quality in an neighboring cell against
that in the serving cell in the ANR-based intra-frequency measurement. A
large value indicates that a neighboring cell must have a better quality
than the serving cell for reporting the ANR measurement report. This NO
parameter must be set to a value smaller than or equal to that of the
IntraFreqHoA3Offset parameter.
In the current version, this parameter is dedicated to LTE TDD cells.
Indicates the hysteresis for the ANR-based inter-frequency measurement
event.
When the UE detects that the signal quality in the serving cell and that in
at least one inter-frequency neighboring cell meet the entering condition,
it does not immediately send an ANR-based measurement report to the
eNodeB. Instead, the UE sends a report only when the signal quality
NO
meets the entering condition throughout the hysteresis.
This parameter helps decrease the number of occasionally triggered
event reports and invalid decisions on triggering inter-frequency ANR.
This parameter must be set to a value smaller than or equal to the
InterFreqHoA4TimeToTrig parameter.
In the current version, this parameter is dedicated to LTE TDD cells.
Indicates the hysteresis for the ANR-based inter-frequency measurement
event. This parameter is used to decrease the number of invalid
decisions on triggering inter-frequency ANR due to radio signal
NO
fluctuations. This parameter must be set to a value smaller than or equal
to the InterFreqHoA4Hyst parameter.
In the current version, this parameter is dedicated to LTE TDD cells.
Indicates the RSRP threshold for triggering the ANR-based inter-
frequency measurement event. When the measured RSRP value
exceeds the threshold, an ANR-based inter-frequency measurement
NO
report is sent. This parameter must be set to a value smaller than or
equal to that of the InterFreqHoA4ThdRsrp parameter.
In the current version, this parameter is dedicated to LTE TDD cells.

Indicates the length of the counter check timer. When the timer expires,
a counter check procedure is initiated. After the procedure is complete,
NO
the timer is restarted. A length of 0 indicates that the timer is invalid. In
this case, the eNodeB cannot initiate periodic counter check procedures.
Indicates the COUNT value for initiating counter check procedures.
When the COUNT value (used at the PDCP layer) of any DRB for a UE
is a multiple of the value of this parameter, the eNodeB initiates a NO
counter check procedure. The value 0 indicates that the eNodeB does
not initiate a counter check procedure based on the COUNT value.

Indicates whether to release a DRB when the counter check detects an

NO
unexpected result in the DRB.

Indicates the highest-priority ciphering algorithm supported by the

NO
eNodeB. The value NULL indicates that ciphering is not applied.
Indicates the second-priority ciphering algorithm supported by the
NO
eNodeB. The value NULL indicates that ciphering is not applied.

Indicates the third-priority ciphering algorithm supported by the eNodeB.

NO
The value NULL indicates that ciphering is not applied.

Indicates the fourth-priority ciphering algorithm supported by the

NO
eNodeB. The value NULL indicates that ciphering is not applied.
Indicates the timer governing the period that the eNodeB waits for a
response message from the MME when the eNodeB does not perform
an S1-based handover for a UE running non-QCI1 services. If the timer
expires, the eNodeB initiates a UE context release over the S1 interface. NO
If the eNodeB performs an S1-based handover for a UE running services
with a QCI of 1, the S1MessageWaitingTimer parameter controls the
period that the eNodeB waits for a response message from the MME.
Indicates the timer governing the period the local eNodeB waits for a
response message from the peer eNodeB when the UE is running non-
QCI1 services. If the eNodeB performs an X2-based handover for a UE
NO
running services with the QCI of 1, the X2MessageWaitingTimerQci1
parameter controls the period that the eNodeB waits for a response
message from the peer eNodeB.
Indicates the timer governing the period the eNodeB waits for a
response message from a UE when the UE is running non-QCI1
NO
services. If the timer expires, the eNodeB initiates a UE context release
over the S1 interface.

Indicates the timer for the eNodeB to wait for a handover preparation
completion message when a UE is handed over to a CDMA2000 1xRTT
cell. The eNodeB starts the timer after sending a Handover From EUTRA NO
Preparation Request message to the UE and stops the timer after
receiving a UL Handover Preparation Transfer message from the UE.
Indicates the timer for the eNodeB to wait for a Downlink S1 CDMA2000
Tunneling message when a UE is handed over to a CDMA2000 1xRTT
cell. The eNodeB starts the timer after sending an UPLINK S1
NO
CDMA2000 TUNNELING message to the MME and stops the timer after
receiving a Downlink S1 CDMA2000 Tunneling message containing
CDMA2000 HO Status.

Indicates the timer for the eNodeB to release resources for a UE after
the UE is handed over to a CDMA2000 1xRTT cell. The eNodeB starts NO
the timer after sending a MobilityFromEUTRACommand message.

Indicates the timer for the eNodeB to release resources for a UE after
the UE is handed over to a CDMA2000 HRPD cell. The eNodeB starts NO
the timer after sending a MobilityFromEUTRACommand message.

Indicates the timer for the eNodeB to wait for a Downlink S1 CDMA2000
Tunneling message when a UE is handed over to a CDMA2000 HRPD
cell. The eNodeB starts the timer after sending an UPLINK S1
NO
CDMA2000 TUNNELING message to the MME and stops the timer after
receiving a Downlink S1 CDMA2000 Tunneling message containing
CDMA2000 HO Status.
Indicates the timer for the eNodeB to wait for a handover preparation
completion message when a UE is handed over to a CDMA2000 HRPD
cell. The eNodeB starts the timer after sending a Handover From EUTRA NO
Preparation Request message to the UE and stops the timer after
receiving a UL Handover Preparation Transfer message from the UE.

Indicates the timer for the eNodeB to wait for a RRC Connection Setup
NO
Complete.

Indicates the timer for the eNodeB to wait for a Security Mode Complete
message.If the UuMsgSimulSendSwitch parameter is set to ON, this
parameter does not take effect and the timer for the eNodeB to wait for a NO
Security Mode Complete message is specified by the
UuMessageWaitingTimer parameter.
Indicates the timer for the eNodeB to wait for an unprotected UE
NO
Capability Information message.

Indicates the timer for the eNodeB to wait for the first forwarded packet. NO
Indicates the timer for the eNodeB to wait for the endmarker packet. NO

Indicates the timer governing the period that the eNodeB waits for a
response message from the MME when the UE are running services
NO
with the QCI of 1. If the timer expires, the eNodeB initiates a UE context
release over the S1 interface.
Indicates the timer governing the period the local eNodeB waits for a
response message from the peer eNodeB when the UE is running
services with the QCI of 1. If the timer expires, the eNodeB processes NO
the same as the timer specified by the X2MessageWaitingTimer
parameter expires.

Indicates the timer governing the period the eNodeB waits for a
response message from a UE when the UE is running services with the
NO
QCI of 1. If the timer expires, the eNodeB initiates a UE context release
over the S1 interface.
Indicates the threshold that an eNodeB uses to identify whether a bearer
is activated. The eNodeB consistently monitors the consecutive time in
NO
which a bear has no data transmission. If the time is less than or equal to
the threshold, the eNodeB determines that the bearer is activated.

Indicates the highest-priority integrity protection algorithm supported by

NO
the eNodeB.

Indicates the second-priority integrity protection algorithm supported by

NO
the eNodeB.
Indicates the third-priority integrity protection algorithm supported by the
NO
eNodeB.

Indicates whether the eNodeB can use the null algorithm for integrity
protection. If this switch is turned off, the null algorithm cannot be used
for integrity protection. When this switch is turned off, the eNodeB
NO
selects an integrity protection algorithm based on the algorithm priorities
specified by PrimaryIntegrityAlgo, SecondIntegrityAlgo, and
ThirdIntegrityAlgo, but skips the null algorithm.

Indicates the type allocation code (TAC) in the IMEISV of UEs. The TAC
identifies the UE model. For details about the definition of IMEISV, see YES
section 6.2.2 in 3GPP TS 23.003.

Indicates the software version number (SVN) which is an element of the

international mobile station equipment identity and software version
YES
(IMEISV) and specifies the software version of UEs. For details about
the definition of IMEISV, see section 6.2.2 in 3GPP TS 23.003.
Indicates the description of the model of UE. NO

Indicates the policy that the eNodeB identifies UEs running unlimited
services.If the UsBasedSpecificSPID(UsBasedSpecificSPID) option is
selected, whether a UE is a UE running unlimited services is determined
based on the SPIDs defined by the operator. Operators need to specify
the SPID for the service policy applied to UEs running unlimited services.
SPID 256 is used by default.
If the UsBasedSpecificIPAdd(UsBasedSpecificIPAdd) option is selected,
whether a UE is a UE running unlimited services is determined based on
IP address of the server dedicated to UEs running unlimited services.
NO
Operators need to configure the parameters related to the server
dedicated to UEs running unlimited services.
If the UsBasedSpecificTraceID(UsBasedSpecificTraceID) option is
selected, the eNodeB identifies a UE as a UE running unlimited services
if an end-to-end tracing task with a dedicated trace ID starts for the UE.
If the UsBasedIMEISV(UsBasedIMEISV) option is selected, the eNodeB
identifies UEs running unlimited services based on the IMEISVs.
Operators need to configure parameters related to the IMEISV
information.

Indicates the SPID for UEs running unlimited services. NO

Indicates the length of the UE inactivity timer for UEs. If the eNodeB
detects that such a UE has neither received nor sent data for a duration
exceeding the value of this parameter, the eNodeB releases the RRC
NO
connection for the UE. If this parameter is set to 0, the UE inactivity timer
is not used. If the parameter setting is changed, the change applies to
UEs that newly access the network.

Indicates the packet interval at which the eNodeB parses the IP headers
NO
of the downlink packets for UEs running unlimited services.
Indicates the weight factor used to calculate DL scheduling priorities for
UEs running unlimited services. This parameter is used to preferentially NO
ensure services for such UEs.

Indicates the weight factor used to calculate the connection priorities

during UL scheduling for large-packet services of UEs running unlimited NO
services.

Indicates the weight factor used to calculate the connection priorities

during UL scheduling for small-packet services of UEs running unlimited NO
services.
Indicates whether to use the identification policy to identify services with
large packets. If the buffered data volume to be transmitted for a UE
exceeds a certain threshold, the UE is identified as a UE running large-
packet services, which is also regarded as a UE running unlimited
services. If this parameter is set to ON, a UE is identified as a UE NO
running unlimited services when its buffered data volume and the
number of scheduling times reach certain thresholds. If this parameter is
set to OFF, UEs running unlimited services are not identified based on
the identification policy.

Indicates the index of the trace ID for UEs running unlimited services. YES

Indicates the trace ID for UEs running unlimited services. This parameter
is valid only if the UsStrategy parameter is set to
UsBasedSpecificTraceID. If the UsTraceID parameter is set to NO
4294967295, the eNodeB determines that UEs with any trace ID are
UEs running unlimited services.

Indicates whether to enable ROHC.

Set this parameter to ON if the eNodeB is expected to support VoIP or NO
video services.

Indicates the operating mode of ROHC. In Unidirectional Mode (U-

Mode), packets are sent only from the compressor to the decompressor,
and a feedback channel is not mandatory. Therefore, U-Mode is less
reliable than Bidirectional Optimistic Mode (O-Mode) and Bidirectional
Reliable Mode (R-Mode), but its feedback-induced overhead is minimum
compared with the overhead in O-Mode and R-Mode. In O-Mode, the
decompressor can send feedback messages to the compressor to NO
indicate decompression failures or successful context updates. O-Mode
is more reliable than U-Mode and requires a smaller amount of feedback
than R-Mode. In R-Mode, the reliability of context synchronization
between the compressor and the decompressor is higher than that in
any other mode. However, because of frequent feedback, R-Mode
causes the largest amount of link overhead.
Indicates the compression profile supported by the eNodeB.
Under the ROHC framework, header compression algorithms vary with
protocols. Profiles define the header compression protocols (such as
RTP/UDP/IP or TCP/IP), which are under the same ROHC framework,
for specific types of packet streams. Each profile has a unique identifier.
As defined by LTE specifications, the eNodeB supports the following NO
profiles: profile 0x0001 (usage: RTP/UDP/IP; reference: RFC 3095 and
RFC 4815), profile 0x0002 (usage: UDP/IP; reference: RFC 3095 and
RFC 4815), profile 0x0003 (usage: ESP/IP; reference: RFC 3095 and
RFC 4815), and profile 0x0004 (usage: IP; reference: RFC 3843 and
RFC 4815).

Indicates the ID of the private CA band combination. It uniquely identifies

YES
a private CA band combination in an eNodeB.
Indicates the maximum aggregated bandwidth supported by the CA band
NO
combination.

Indicates the protocol-defined ID of a CA bandwidth combination set. As

defined in 3GPP TS 36.101, an operating frequency band supports
NO
different bandwidth combinations, which are identified by using different
set IDs. For details, see section 5.6A.1 in 3GPP TS 36.301.
Indicates combination band 1. For details, see 3GPP TS 36.101. NO

Indicates combination band 2. For details, see 3GPP TS 36.101. NO

Indicates combination band 3. For details, see 3GPP TS 36.101. If the
NO
value is 0, combination band 3 is invalid.

Indicates combination band 4. For details, see 3GPP TS 36.101. If the

NO
value is 0, combination band 4 is invalid.
Indicates the bandwidth combination of combination band 1. If a
bandwidth is selected, the carrier with the corresponding bandwidth in
combination band 1 is supported in the private CA combination band.
The selected bandwidths must be consistent with the actual bandwidth NO
configurations. Otherwise, the bandwidths that a UE does not support
are determined as supported by the eNodeB, causing CA configuration
failures in the eNodeB.

Indicates the bandwidth combination of combination band 2. If a

bandwidth is selected, the carrier with the corresponding bandwidth in
combination band 2 is supported in the private CA combination band.
The selected bandwidths must be consistent with the actual bandwidth NO
configurations. Otherwise, the bandwidths that a UE does not support
are determined as supported by the eNodeB, causing CA configuration
failures in the eNodeB.
Indicates the bandwidth combination of combination band 3. If a
bandwidth is selected, the carrier with the corresponding bandwidth in
combination band 3 is supported in the private CA combination band.
The selected bandwidths must be consistent with the actual bandwidth NO
configurations. Otherwise, the bandwidths that a UE does not support
are determined as supported by the eNodeB, causing CA configuration
failures in the eNodeB.

Indicates the bandwidth combination of combination band 4. If a

bandwidth is selected, the carrier with the corresponding bandwidth in
combination band 4 is supported in the private CA combination band.
The selected bandwidths must be consistent with the actual bandwidth NO
configurations. Otherwise, the bandwidths that a UE does not support
are determined as supported by the eNodeB, causing CA configuration
failures in the eNodeB.
Indicates whether the private CA band combination conflicts with
solidified CA band combinations supported by an eNodeB. The solidified
CA band combinations supported by the eNodeB include the solidified
private CA band combinations and 3GPP-defined CA band combinations
of the related protocol version that the eNodeB complies with. If a conflict
NO
occurs, the eNodeB preferentially uses the private CA band combination
configured in the PrivateCaBandComb MO to match with the CA
capabilities of UEs. For details about the solidified CA band
combinations supported by the eNodeB, see carrier aggregation feature
parameter description.

Indicates the length of timer T302.

T302 specifies the time during which a UE whose RRC connection
request is rejected has to wait before the UE can initiate a request again.
NO
This timer is started when the UE receives an RRCConnectionReject
message and stopped when the UE enters the RRC_CONNECTED
mode or performs cell reselection.
Indicates the length of timer T320 for load balancing. T320 specifies the
time period during which the dedicated priorities (used for cell
reselection) retain valid. The time period is contained in the
RRCConnectionRelease message that is received by the UE. After T320
NO
expires, the dedicated priorities become invalid.
This timer is started when the UE receives an RRCConnectionRelease
message containing the t320 IE.
This timer is stopped when the UE enters the RRC_CONNECTED mode.

Indicates the length of timer T304 for intra-RAT handover. If the UE does
not complete the handover before this timer expires, the UE reverts back
NO
to the associated configuration and initiates an RRC connection
reestablishment procedure.
Indicates the length of timer T304 for inter-RAT handover to GERAN. If
the UE does not complete the handover before this timer expires, the UE
NO
reverts back to the associated configuration and initiates an RRC
connection re-establishment procedure.

Indicates the length of timer T320 to be contained in

RRCConnectionRelease messages sent for reasons other than load
balancing. T320 specifies the time period during which the dedicated
priorities (used for cell reselection) are valid. After T320 expires, the
dedicated priorities become invalid. This parameter is invalid for UEs to NO
be redirected based on the subscriber profile ID (SPID).
This timer is started when the UE receives an RRCConnectionRelease
message containing the t320 IE. It is stopped when the UE enters the
RRC_CONNECTED mode.
Indicates the length of the UE inactivity timer for UEs that are running
non-QCI1 services. If the eNodeB detects that a UE has neither received
nor sent data for a duration exceeding the value of this parameter, the
NO
eNodeB releases the RRC connection for the UE. If this parameter is set
to 0, the UE inactivity timer is not used. If the parameter setting is
changed, the change applies to UEs that newly access the network.
Indicates the timer used to govern the period in which the eNodeB
maintains uplink synchronization for a UE. After this timer expires, the
eNodeB does not send Timing Advance Command to the UE. This
NO
parameter does not take effect if it is set to 0. That is, the eNodeB will
constantly send Timing Advance Command to the UE to maintain uplink
synchronization for the UE.

Indicates the length of the timer for the eNodeB to filter repeated RRC
Connection Request messages. The actually used timer length is the NO
sum of T300 length and the value of this parameter.
Indicates the length of the UE inactivity timer for DRX UEs when
dynamic DRX is enabled. If the eNodeB detects that a UE has neither
received nor sent data for a duration exceeding the value of this
parameter, the eNodeB releases the RRC connection for the UE. A large
value of this parameter reduces the amount of signaling but increase UE
NO
power consumption.You are advised to set this parameter to a value
greater than the value of UlSynTimerDynDrx.In power saving mode, you
are advised to set this parameter significantly different to the value of the
UlSynTimerDynDrx parameter, for example a gap of 10 seconds, to
avoid power consumption increase due to the increase of signaling.
Indicates the timer used to govern the period in which the eNodeB
maintains uplink synchronization for a DRX UE when dynamic DRX is
enabled. After this timer expires, the eNodeB does not send Timing
Advance Command to the UE. You are advised to set this parameter to a
value smaller than the value of UeInactivityTimerDynDrx.In power saving NO
mode, you are advised to set this parameter significantly different to the
value of the UeInactivityTimerDynDrx parameter, for example a gap of 10
seconds, to avoid power consumption increase due to the increase of
signaling.
Indicates the length of the UE inactivity timer for UEs that are running
services of QCI 1. If the eNodeB detects that a UE has neither received
nor sent data for a duration exceeding the value of this parameter, the
eNodeB releases the RRC connection for the UE. If this parameter is set
to 0, the UE inactivity timer is not used. This timer takes effect during the NO
setup of bearers with a QCI of 1. During a handover or RRC connection
reestablishment to a new cell, the eNodeB determines whether the timer
takes effect based on whether the UE is running services with a QCI of
1. If yes, the timer takes effect; otherwise, the timer does not take effect.
Indicates whether to enable adaptive configuration of parameters related
to Radio Link Control (RLC) on SRBs. If this parameter is set to ON(On),
the eNodeB adaptively adjusts the SRB polling PDU retransmission
timer for the eNodeB based on the timer expiration information and the NO
number of scheduled UEs in the uplink. This aims to match the timer
length and the interval at which UEs sends the status report and reduces
the number of invalid retransmissions due to the timer expiration.

Indicates the adjustment step of the SRB polling PDU retransmission

timer for the eNodeB. This parameter takes effect when the NO
SrbRlcParaAdaptSwitch parameter is set to ON(On).
Indicates the maximum adjustment step of the SRB polling PDU
retransmission timer for the eNodeB. This parameter takes effect when NO
the SrbRlcParaAdaptSwitch parameter is set to ON(On).
Indicates the UE number threshold for triggering the SRB RLC
parameter adaptation. If the SrbRlcParaAdaptSwitch parameter is set to
ON(On) and the number of UEs in a cell is greater than the NO
SrbPollTimerAdjUserNumThd parameter value, the adaptive adjustment
of the SRB polling PDU retransmission timer for the eNodeB is triggered.

Indicates the ID of the TCE for MDT. YES

Indicates the IP address version. IPv4~0 indicates that the IP version is

NO
IPv4. IPv6~1 indicates that the IP version is IPv6.

Indicates the IPv4 address of the TCE. NO

Indicates the IPv6 address of the TCE. NO

Indicates whether to enable ARP- and QCI-based user-differentiated

scheduling.
If ArpPrioritySchSwitch is set to 1, ARP- and QCI-based user-
differentiated scheduling is enabled and the UlschPriorityFactor and
NO
DlschPriorityFactor parameters for standardized QCIs do not take effect.
If ArpPrioritySchSwitch is set to 0, ARP- and QCI-based user-
differentiated scheduling is disabled and the UlschPriorityFactor and
DlschPriorityFactor parameters for standardized QCIs take effect.

Indicates the user priority for ARP 1. NO

Indicates the user priority for ARP 2. NO

Indicates the user priority for ARP 3. NO

Indicates the user priority for ARP 4. NO

Indicates the user priority for ARP 5. NO

Indicates the user priority for ARP 6. NO

Indicates the user priority for ARP 7. NO

Indicates the user priority for ARP 8. NO

Indicates the user priority for ARP 9. NO

Indicates the user priority for ARP 10. NO

Indicates the user priority for ARP 11. NO

Indicates the user priority for ARP 12. NO

Indicates the user priority for ARP 13. NO

Indicates the user priority for ARP 14. NO

Indicates the user priority for ARP 15. NO

Indicates the QCI of an EPS bearer. Different QCIs represent different

QoS specifications such as the packet delay budget, packet error loss
YES
rate, and resource type (whether the service is a GBR service or not).
For details, see Table 6.1.7 in 3GPP TS 23.203.

Indicates the weight factor used to calculate the connection priorities

NO
during uplink scheduling for gold users.
Indicates the weight factor used to calculate the connection priorities
NO
during downlink scheduling for gold users.

Indicates the weight factor used to calculate the connection priorities

NO
during uplink scheduling for silver users.

Indicates the weight factor used to calculate the connection priorities

NO
during downlink scheduling for silver users.

Indicates the weight factor used to calculate the connection priorities

NO
during uplink scheduling for bronze users.
Indicates the weight factor used to calculate the connection priorities
NO
during downlink scheduling for bronze users.

Indicates the mobile country code (MCC) of an operator that the target
YES
eNodeB supporting X2 self-setup belongs to.

Indicates the mobile network code (MNC) of an operator that the target
eNodeB supporting X2 self-setup belongs to. The value of this parameter
YES
is a string of two or three characters, each of which must be a digit in the
range of 0 to 9.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the Reference Signal Received Power (RSRP) threshold for

reporting event A2 in a secondary cell. When the RSRP of a UE is lower NO
than this threshold, event A2 is reported.
Indicates the Reference Signal Received Power (RSRP) threshold for a
UE to report event A4 of a secondary cell. When the RSRP of the UE is NO
greater than the threshold, event A4 is reported.

Indicates whether to enable carrier management. If this parameter is set

to ON(On), the eNodeB deactivates the secondary serving cell (SCell)
for a CA UE when the traffic volume of the CA UE is small or the channel
NO
quality of the SCell is poor. If this parameter is set to OFF(Off), the SCell
is always active after being activated, unless a radio link failure (RLF) is
detected on the SCell.
Indicates the threshold for a CA UE to activate an SCell. A CA UE can
active an SCell only when its buffered data on the eNodeB exceeds this NO
threshold.

Indicates the threshold for a CA UE to deactivate an SCell. A CA UE can

deactivate an SCell only when its buffered data on the eNodeB is smaller NO
than this threshold.
Indicates the threshold for a CA UE to activate an SCell. A CA UE can
activate an SCell only when its buffer delay on the eNodeB exceeds this NO
threshold.

Indicates the threshold for a CA UE to deactivate an SCell. A CA UE can

deactivate an SCell only when its throughput is smaller than the value of NO
this parameter.
Indicates the offset for secondary cell event A6. This offset is the
difference between the quality of a neighboring cell and that of the
NO
serving cell. A large value indicates that a neighboring cell must have a
better quality than the serving cell for reporting the event A6.
Indicates the length of aging time of the SCells that are dynamically
configured for CA UEs in a cell in frequency-based CA configuration
scenarios. If no CA UE is performing carrier aggregation between an NO
SCell and the PCell within the aging time, the eNodeB cancels the
association between the SCell and the PCell.
Indicates the number of periodic measurement reports sent after CA
NO
event A6 is triggered. For details, see 3GPP TS 36.331.
Indicates the interval between periodic measurement reports that are
NO
sent after CA event A6 is triggered. For details, see 3GPP TS 36.331.
Indicates the CQI threshold for deactivating an SCell or stopping
scheduling CA UEs in the SCell based on the channel quality.
If the CaSccSuspendSwitch option of the SCell is deselected and the
channel quality for the CA UEs is worse than that indicated by the
SccDeactCqiThd parameter value in single-codeword transmission, the
eNodeB deactivates the SCell. If the SccDeactCqiThd parameter is set
to 0, the eNodeB does not deactivate the SCell for a CA UE based on
channel quality of the SCell.
If the CaSccSuspendSwitch option of the SCell is selected, the eNodeB NO
stops scheduling CA UEs when the channel quality for the CA UEs is
worse than that indicated by the SccDeactCqiThd parameter value in
single-codeword transmission. The eNodeB resumes scheduling CA UEs
in their SCells when the channel quality for the CA UEs is better than
that indicated by the SccDeactCqiThd parameter value plus 2 in single-
codeword transmission. If the SccDeactCqiThd parameter is set to 0, the
eNodeB does not stop scheduling CA UEs in their SCells due to poor
channel quality.
Indicates the minimum interval at which the eNodeB attempts to
configure a secondary serving cell (SCell) again for a CA UE whose
SCell failed to be configured. The actual interval at which the eNodeB
attempts to configure a secondary serving cell (SCell) again for a CA UE NO
must be larger than this value. The eNodeB makes the attempt only if
the traffic volume of the UE always meets the SCell activation condition
throughout a certain time.
CaDl3CCSwitch(CaDl3CCSwitch): Indicates whether to enable
aggregation of three component carriers in the downlink. This type of
aggregation works if this option is selected and at least two SccFreqCfg
MOs or three CaGroupCell MOs are configured.
CaUl2CCSwitch(CaUl2CCSwitch): Indicates whether to enable
aggregation of two component carriers in the uplink.This type of
aggregation works if this option is selected and at least one SccFreqCfg
MO or two CaGroupCell MOs are configured.
CaDl4CCSwitch(CaDl4CCSwitch): Indicates whether to enable
aggregation of four component carriers in the downlink.This type of
aggregation works if this option is selected and at least three NO
SccFreqCfg MOs or four CaGroupCell MOs are configured.
InterFddTddCaSwitch(InterFddTddCaSwitch): Indicates whether to
enable aggregation of TDD and FDD component carriers.This type of
aggregation works if this option is selected. In a combination of FDD and
TDD cells for CA, either an FDD cell or a TDD cell can act as the PCell.
Tdd2CCDlCaEnhanceSwitch(Tdd2CCDlCaEnhanceSwitch): Indicates
whether to enable enhanced DL ACK demodulation when two TDD
component carriers are aggregated. This option does not apply to LTE
FDD. If this option is selected, PUCCH format 3 is used.If this option is
deselected, PUCCH format 1b with channel selection is used.

Indicates the time-to-trigger for activating an SCell for a UE in the uplink.

If the uplink traffic volume of a CA UE is greater than the
ActiveBufferLenThd parameter value throughout the period specified by NO
the UlCaActiveTimeToTrigger parameter, the eNodeB initiates the SCell
activation procedure.
Indicates the aggregate maximum bit rate (AMBR) threshold for
aggregating carriers for UEs. Carriers can only be aggregated for UEs
NO
whose AMBR values are greater than the threshold. A larger value of this
parameter leads to fewer UEs for whom the carriers can be aggregated.
This reserved parameter specifies the sampling period of the radio
resource measurement on the SCell by the CA UE when the SCell is
deactivated. If the sampling period is not configured, the measurement NO
configuration message that the eNodeB sends to the CA UE does not
contain the IE measCycleSCell.
Indicates the maximum number of CA UEs that are allowed to use the
cell's carrier as the PCC. If the number of CA UEs using the cell's carrier
as the PCC has reached the parameter value, no more CA UEs can use
the carrier as the PCC. A smaller parameter value leads to fewer CA UEs
that are allowed to use the cell's carrier as the PCC. If this parameter is NO
set to 0, no CA UE is allowed to use the cell's carrier as the PCC but CA
UEs can use the carrier as the SCC. If the total value of this parameter
for all cells on a baseband processing unit exceeds the upper limit of
such UEs served by the unit, the limit takes effect.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES
Indicates the type of adaptive selection between beamforming
and MIMO for a multi-antenna eNodeB. The values are described as
follows:
NO_ADAPTIVE: A fixed beamforming or MIMO transmission mode is
used. That is, transition between the beamforming and MIMO
transmission
mode is not supported.
TxD_BF_ADAPTIVE: The transmission mode
changes adaptively between TM2 and TM7 or between TM2 and TM8,
NO
depending
on the protocol release with which UEs comply.
MIMO_BF_ADAPTIVE:
The transmission mode changes adaptively between TM2, TM3, and
TM7,
between TM2, TM3, and TM8, or between TM2, TM3, TM8, and TM9,
depending
on the protocol release with which UEs comply. The TM9Switch check
box must be selected if the TM9 mode is required.
Indicates the fixed beamforming or MIMO transmission mode configured
for a multi-antenna eNodeB. This parameter is valid only when
BfMimoAdaptiveSwitch is set to NO_ADAPTIVE. The values are
described as follows:
TM2: Transmission mode 2 is always used for UEs.
TM3: Transmission mode 3 is always used for UEs.
TM7: Transmission mode 7 is always used for UEs. NO
TM8: Transmission mode 8 is always used for UEs.
TM4: Transmission mode 4 is always used for UEs.
TM9 w/o PMI: Transmission mode 9 without PMI reporting is always
used for UEs.
TM9 w PMI: Transmission mode 9 with PMI reporting is always used for
UEs.
Indicates whether TM2 transmission mode is adaptively selected
between beamforming and MIMO when the BfMIMO adaptive switch
parameter is set to MIMO_BF_ADAPTIVE. If this parameter is set to ON
and the BfMIMO adaptive switch parameter is set to
MIMO_BF_ADAPTIVE, TM3 is initially used for handovers, and then
handover modes are adaptively selected between TM3 and TM7, TM3
and TM8, or TM3, TM8, and TM9 based on the protocols that UEs
comply with. If TM9 needs to be adaptively selected, the TM9Switch NO
option must be selected. If this parameter is set to OFF and the BfMIMO
adaptive switch parameter is set to MIMO_BF_ADAPTIVE, TM2 is
initially used for handovers, and then handover modes are adaptively
selected between TM2, TM3, and TM7, TM2, TM3, and TM8, or TM2,
TM3, TM8, and TM9 based on the protocols that UEs comply with. If
TM9 needs to be adaptively selected, the TM9Switch check box must be
selected.
Indicates the offset of the threshold that triggers the
transmission mode switching from single-stream beamforming mode to
dual-stream beamforming mode. This parameter applies only to LTE NO
TDD
cells.
Indicates the offset of the threshold that triggers the
transmission mode switching from TM3 dual-stream mode to dual-stream NO
beamforming mode. This parameter applies only to LTE TDD networks.
Indicates the offset of the threshold against which the
transmission mode of an antenna selection-enabled UE switches from
dual-stream beamforming mode to TM3 dual-stream mode. This NO
parameter
applies only to LTE TDD cells.
Indicates the offset of the threshold against which the
transmission mode of an antenna selection-enabled UE switches from
TM3 dual-stream mode to dual-stream beamforming mode. This NO
parameter
applies only to LTE TDD cells.
Indicates the offset of the threshold against which the
transmission mode of an antenna selection-enabled UE switches from
single-stream beamforming mode to dual-stream beamforming mode. NO
This
parameter applies only to LTE TDD cells.
Indicates the offset of the threshold that triggers the
transmission mode switching from dual-stream beamforming mode to
NO
TM3
dual-stream mode. This parameter applies only to LTE TDD cells.
Indicates whether the measured weight has a gain. When the
difference between the measured weight and the instantaneous weight
is greater than the offset, the measured weight is used as the NO
beamforming
weight.
Indicates whether the instantaneous weight has a gain. When
the difference between the instantaneous weight and the measured
weight NO
is smaller than the offset, the instantaneous weight is used for
beamforming.

Indicates the antenna type used for adaptive selection of transmission

modes between beamforming and MIMO. This parameter applies only to
LTE TDD cells.
If this parameter is set to 0, 8T8R crossed-polarized antennas are used. NO
If this parameter is set to 1, 8T8R circular array antennas are used.
If this parameter is set to 2, other types of antennas are used.
Set this parameter based on the type of antenna in use.
Indicates whether to enable adaptive transmission mode switching
between MIMO and beamforming. If this switch is turned on, the
transmission mode changes from TM3 dual-stream mode to dual-stream
beamforming mode. If this switch is turned off, the TM3 dual-stream NO
mode must be changed to single-stream beamforming mode and then to
dual-stream beamforming mode when the dual-stream beamforming
mode is required.

Indicates whether to enable adaptive selection of the transmission mode

of an SCC for CA UEs.
If this parameter is set to ON, the transmission mode is selected based
on the beamforming and MIMO configurations.
If this parameter is set to OFF, the transmission mode is fixed to TM3 (in
NO
non-multi-RRU cell scenarios) or TM1 (in single-antenna scenarios).
In multi-RRU cell scenarios where all RRUs of the SCC work in 1T1R
mode, the transmission mode can be TM1 or TM2 based on the number
of CRS ports of the cell. In other multi-RRU cell scenarios, the
transmission mode is configured to TM3.
Indicates the offset between the threshold for triggering low-speed UE
switching between beamforming mode and MIMO mode and that for
triggering high-speed UE switching between beamforming mode and
MIMO mode. This parameter takes effect only when adaptation between
beamforming and MIMO is enabled. This parameter can be used for
NO
optimization if low-speed UEs cannot select an optimal transmission
mode by using the adaptive selection function. If this parameter is set to
0, the same threshold for switching between beamforming and MIMO
modes is adopted for low-speed and high-speed UEs. This parameter
applies only to LTE TDD cells using 8T cross polarization antennas.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates whether to enable CQI reporting period adaptation. If this
parameter is set to ON(On), the CQI reporting period adaptively changes
based on the air interface load of the cell. If this parameter is set to NO
OFF(Off), the CQI reporting period is specified by the UserCqiPeriod
parameter.

Indicates the fixed CQI reporting period. This parameter takes effect only
if the CqiPeriodAdaptive parameter is set to OFF(Off). If the
NO
UserCqiPeriod parameter is set to ms2(2ms), the period is automatically
changed to 5ms for the TDD cell.
Indicates whether CQI and ACK/NACK can be simultaneously sent on
the PUCCH. For details, see the contents related to PUCCH formats in
3GPP TS 36.213. If this parameter is set to OFF, the value of
simultaneousAckNackAndCQI becomes False, that is, CQI and
NO
ACK/NACK cannot be simultaneously sent on the PUCCH. When this
parameter is set to ON, the value of simultaneousAckNackAndCQI
becomes True, that is, CQI and ACK/NACK can be simultaneously sent
on the PUCCH.

Indicates the aperiodic CQI resource configurations and the triggering

condition of aperiodic CQI reporting during handovers. If this parameter
is set to ON(On), aperiodic CQI resource configurations are included in
handover commands. When no periodic CQI resources are configured
NO
for a UE, an aperiodic CQI reporting is triggered when the handed-over
UE receives data. If this parameter is set to OFF(Off), aperiodic CQI
resource configurations are not included in handover commands. The
aperiodic CQI resource is configured after the UE is handed over.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the offset for reporting the DL CoMP measurement event. This
offset is the difference between the signal quality of a neighboring cell
and that of the serving cell. A larger value indicates that a neighboring NO
cell must have better quality for reporting the event. For details, see
3GPP TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the switch for adjusting the PA through power control on the
PDSCH. If this parameter is set to ON, the PA is adjusted dynamically NO
when the channel quality is extremely good or bad.
Indicates the PA to be used when PA adjustment for PDSCH power
control is disabled, DL ICIC is disabled, and the even power distribution NO
is used for the PDSCH.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the threshold for UEs to enter the discontinuous reception

(DRX) mode in a cell that operates in FDD mode. This threshold is used
in the DRX algorithm. It is expressed as a proportion of the transmission
time intervals (TTIs) with data transmission to the total TTIs. If the
measurement result of UE traffic is equal to or lower than this threshold,
the eNodeB determines that the UE should remain in DRX mode or the
UE should be triggered to enter DRX mode. If both the values of the NO
FddExitDrxThd and FddEnterDrxThd parameters are small and close to
each other, the UE frequently enters and exits the DRX mode. When
both the FddEnterDrxThd parameter and the FddExitDrxThd parameter
are set to 1000 and DRX is enabled, the eNodeB directly determines that
the UE should enter or exit the DRX mode, but not according to the
measurement result of UE traffic.
Indicates the threshold for UEs to exit the discontinuous reception (DRX)
mode in a cell that operates in FDD mode. This threshold is used in the
DRX algorithm. It is expressed as a proportion of the transmission time
intervals (TTIs) with data transmission to the total TTIs. If the
measurement result of UE traffic is higher than this threshold, the
eNodeB determines that the UE should remain in the non-DRX mode or
the UE should be triggered to exit the DRX mode. If the value of the
FddExitDrxThd parameter is set to 1000 and the value of the
NO
FddEnterDrxThd parameter is set to a value smaller than 1000, the UE
will not exit the DRX mode once entering the DRX mode. If both the
values of the FddExitDrxThd and FddEnterDrxThd parameters are small
and close to each other, the UE frequently enters and exits the DRX
mode. When both the FddEnterDrxThd parameter and the
FddExitDrxThd parameter are set to 1000 and DRX is enabled, the
eNodeB directly determines that the UE should enter or exit the DRX
mode, but not according to the measurement result of UE traffic.

Indicates the uplink traffic volume threshold for UEs to enter DRX in the
cell that operates in TDD mode. This threshold is used in the DRX
algorithm. It is expressed as a proportion of the transmission time
intervals (TTIs) with uplink data transmission to the total TTIs. If the NO
traffic volume at a UE is equal to or lower than this threshold, the
eNodeB decides that the UE should retain its DRX state or enter DRX.
This parameter is valid only for LTE TDD cells.

Indicates the uplink traffic volume threshold for UEs to exit DRX in the
cell that operates in TDD mode. This threshold is used in the DRX
algorithm. It is expressed as a proportion of the transmission time
intervals (TTIs) with uplink data transmission to the total TTIs. If the NO
traffic volume at a UE is equal to or higher than this threshold, the
eNodeB decides that the UE should retain its non-DRX state or exit
DRX. This parameter is valid only for LTE TDD cells.

Indicates the downlink traffic volume threshold for UEs to enter DRX in
the cell that operates in TDD mode. This threshold is used in the DRX
algorithm. It is expressed as a proportion of the transmission time
intervals (TTIs) with downlink data transmission to the total TTIs. If the NO
traffic volume at a UE is equal to or lower than this threshold, the
eNodeB decides that the UE should retain its DRX state or enter DRX.
This parameter is valid only for LTE TDD cells.

Indicates the downlink traffic volume threshold for UEs to exit DRX in the
cell that operates in TDD mode. This threshold is used in the DRX
algorithm. It is expressed as a proportion of the transmission time
intervals (TTIs) with downlink data transmission to the total TTIs. If the NO
traffic volume at a UE is equal to or higher than this threshold, the
eNodeB decides that the UE should retain its non-DRX state or exit
DRX. This parameter is valid only for LTE TDD cells.
Indicates the length of the UE traffic measurement period. The traffic
volume of a UE during this period is measured. Based on the
NO
measurement result, the DRX algorithm decides whether the UE should
enter or exit DRX.
Indicates whether DRX active-time measurement is supported in the cell
that operates in TDD mode. If this parameter is set to ON, DRX active-
time measurement is supported in the cell that operates in TDD mode. If
NO
this parameter is set to OFF, DRX active-time measurement is not
supported in the cell that operates in TDD mode. This parameter is valid
only for LTE TDD cells.
Indicates the length of the UE DRX power saving measurement period
for cells that operate in TDD mode. The power saving volume of a UE
during this period is measured. Based on the measurement result, the NO
DRX algorithm decides whether the UE should enter or exit DRX. This
parameter is valid only for LTE TDD cells.

Indicates the active-time measurement threshold for UEs to enter DRX in

the cell that operates in TDD mode. This threshold is used in the DRX
algorithm. If the measurement result of a UE is lower than this threshold, NO
the eNodeB decides that the UE should retain its DRX state or enter
DRX. This parameter is valid only for LTE TDD cells.

Indicates the active-time measurement threshold for UEs to exit DRX in

the cell that operates in TDD mode. This threshold is used in the DRX
algorithm. If the measurement result of a UE is higher than this NO
threshold, the eNodeB decides that the UE should retain its non-DRX
state or exit DRX. This parameter is valid only for LTE TDD cells.

Indicates the length of the long DRX cycle for a UE in the uplink out-of-
synchronization state. Set this parameter to a value greater than the
NO
value of LongDrxCycle; otherwise, the power saving gain of the DRX for
UEs in the uplink out-of-synchronization state decreases.
Indicates whether the cqi-Mask IE can be set. The cqi-Mask IE is an
optional IE introduced in 3GPP Release 9. If the cqi-Mask IE is set to
Setup, the UE can send CQI/PMI/RI/PTI reports on PUCCH only in the
NO
onDuration period of discontinuous reception (DRX). If the cqi-Mask IE is
not set, the UE can send CQI/PMI/RI/PTI reports on PUCCH in the
active period of DRX.
Indicates the DRX onduration timer for UEs when the eNodeB does not
NO
maintain synchronization for UEs.
Indicates the DRX inactivity timer for UEs when the eNodeB does not
NO
maintain synchronization for UEs.

Indicates the policy for selecting a DRX parameter group for a UE for
which the bearers have multiple QCIs. If this parameter is set to
DEFAULT(Default), the DRX parameter group with the shortest long
DRX cycle is preferentially selected for the UE. If the lengths of long
DRX cycle for multiple QCIs are the same, the DRX parameter group
with the highest-priority QCI is selected for the UE. The QCI priorities are NO
defined in 3GPP specifications. If this parameter is set to
QCIPRIORITY(QCI priority), the DRX parameter group with the highest-
priority QCI is selected for the UE. If no DRX parameter group is
configured for the highest-priority QCI, the eNodeB does not configure
the DRX parameter group for the UE.
Indicates whether to enable optimized random distribution of
DrxStartOffset values for UEs that are configured with only sounding
reference signal (SRS) resources, or periodic channel quality indicator
(CQI), or neither. If this parameter is set to OFF, then DrxStartOffset
takes the value of SrsOffset, CqiOffset, or 0 when a UE is configured
with only SRS resources, or periodic CQI, or neither, respectively. This
prevents DrxStartOffset values from being randomly distributed within
NO
the range of 0 to (LongDrxCycle - 1). If this parameter is set to ON,
DrxStartOffset values can be randomly distributed within the range of 0
to (LongDrxCycle - 1) for UEs that are configured with only SRS
resources, or periodic CQI, or neither. This parameter applies only to
LTE FDD eNodeBs and is recommended to be set to ON when SRS
resources are not allocated for UEs or there is a large number of UEs in
the cell.

Indicates whether to enable UEs with discontinuous reception (DRX)

enabled to enter the DRX sleep time after two consecutive discontinuous
transmissions (DTXs) are detected. Consider that this parameter is set to
ON and DRX is enabled for a UE in common scenarios. After detecting
two consecutive DTXs, the eNodeB determines whether to enable the
UE to enter the DRX sleep time based on the stop time of the
DRXInactivityTimer timer instead of promptly enabling the UE to enter
the DRX sleep time. If the eNodeB detects the two consecutive DTXs
after the DRXInactivityTimer timer stops, the UE enters the DRX sleep
time. If the eNodeB detects the two consecutive DTXs before the
NO
DRXInactivityTimer timer stops, the UE does not enter the DRX sleep
time.
If this parameter is set to ON and DRX is enabled for a UE in carrier
aggregation (CA) scenarios, the eNodeB determines whether two
consecutive DTXs occur based on hybrid automatic repeat request
(HARQ) feedbacks on both the primary component carrier (PCC) and the
secondary component carrier (SCC). If two consecutive DTXs occur, the
eNodeB determines whether the UE enters the DRX sleep time based
on conditions in common scenarios. In CA scenarios, the setting of this
parameter in the PCell and the SCell must be the same.
Indicates whether to deliver DRX parameters dedicated for
measurement to UEs performing CSFB-triggered GSM measurement. If
this parameter is set to OFF, the eNodeB configures only a
measurement gap for UEs to perform CSFB-triggered GSM NO
measurement. If this parameter is set to ON, the eNodeB configures
both DRX parameters and measurement gaps for UEs to perform CSFB-
triggered GSM measurement.
Indicates the length of the long DRX cycle dedicated to GERAN
NO
measurement.
Indicates the length of the On Duration Timer dedicated to GERAN
NO
measurement.
Indicates the length of the DRX Inactivity Timer dedicated to GERAN
NO
measurement.
Indicates the length of the DRX Retransmission Timer dedicated to
NO
GERAN measurement.

Indicates whether to enable the short DRX cycle dedicated to GERAN

NO
measurement.
Indicates the length of the short DRX cycle dedicated to GERAN
NO
measurement.
Indicates the length of the DRX Short Cycle Timer dedicated to GERAN
NO
measurement.
Indicates whether to increase the probability of falsely detected SRs
when UEs are in the DRX state. If this switch is turned off, there is a high
probability of falsely detected SRs when UEs are in the DRX state. If this
switch is turned on, there is a low probability of falsely detected SRs in
the DRX state, and UEs enter active state only after falsely detected SRs NO
are confirmed, which reduces the impact of falsely detected SRs. It is
recommended that the PuschDtxSwitch check box under the
UlSchSwitch parameter is selected when this switch is turned on. This
parameter applies only to LTE TDD networks.

Indicates whether to adjust the DrxStartOffset value. This parameter

applies only to LTE TDD networks. If this switch is turned on,
DrxStartOffset is not configured on the special subframe to avoid the
following compatibility issue: If the DrxStartOffset is configured on the NO
special subframe for certain UEs and downlink scheduling is performed
on the subframe, these UEs cannot receive information indicating
downlink scheduling.
Indicates whether to enable special scheduling after the eNodeB delivers
DRX parameters dedicated for measurement to the UE. If this parameter
is set to ON, special scheduling is enabled. The UEs running services
have a long sleep period for GSM measurement, which reduces the
NO
measurement reporting delay. If this parameter is set to OFF, special
scheduling is disabled. The UEs running services have a short sleep
period for GSM measurement, which increases the measurement
reporting delay.

Indicates whether to deliver DRX parameters dedicated for

measurement to UEs performing coverage-based GSM measurement. If
this parameter is set to OFF, the eNodeB configures only a
measurement gap for UEs to perform coverage-based GSM NO
measurement. If this parameter is set to ON, the eNodeB configures
both DRX parameters and measurement gaps for UEs to perform
coverage-based GSM measurement.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the RSRP threshold for event A1/A2 related to coverage-based
inter-frequency and inter-RAT blind handovers. If the RSRP
measurement result of the serving cell is higher than the sum of this
threshold and the hysteresis throughout the time-to-trigger, event A1 is NO
reported. If the RSRP measurement result of the serving cell is lower
than this threshold minus the hysteresis throughout the time-to-trigger,
event A2 is reported.
Indicates the RSRQ threshold for event A1/A2 related to coverage-based
inter-frequency and inter-RAT blind handovers. If the RSRQ
measurement result of the serving cell is higher than the sum of this
threshold and the hysteresis throughout the time-to-trigger, event A1 is NO
reported. If the RSRQ measurement result of the serving cell is lower
than this threshold minus the hysteresis throughput the time-to-trigger,
event A2 is reported.

Indicates the threshold that determines whether a UE moves at a high or

low speed. If the UE moves at a speed lower than this threshold, the UE NO
is a low-speed UE. Otherwise, it is a high-speed UE.

Indicates the handover method switches based on which the eNodeB

determines handover policies.
BlindHoSwitch: This option controls whether to enable blind handovers
NO
for CSFB. If both this option and the BlindHoSwitch option of the
Handover Mode switch parameter of the ENodeBAlgoSwitch MO are
selected, blind handovers for CSFB are enabled.

Indicates the switches used to control whether to enable optimization

algorithms for SRVCC-based handovers.
SRVCCWITHPSCSRETRYSWITCH(SrvccWithPsCsRetrySwitch):
Assume that a PS+CS handover preparation for SRVCC fails. If this
NO
option is selected, the eNodeB reinitiates a CS handover preparation
attempt in the original target cell. If this option is deselected, the eNodeB
does not reinitiate a CS handover preparation attempt in the original
target cell.
Indicates the MCS index threshold for triggering uplink-quality-based
handovers. If the uplink MCS index selected for a UE is less than the
UlBadQualHoMcsThd parameter value, the eNodeB measures the uplink
IBLER of the UE. The eNodeB determines whether to trigger an uplink-
NO
quality-based handover for a UE based on the measurement result. If the
selected uplink MCS index is greater than the UlBadQualHoMcsThd
parameter value, the uplink-quality-based handover is terminated for the
UE.

Indicates the IBLER threshold for triggering uplink-quality-based

handovers. If the uplink IBLER of a UE minus the target IBLER is greater
than the UlBadQualHoIblerThd parameter value, an uplink-quality-based
handover is triggered for the UE. If the uplink IBLER of a UE minus the
target IBLER and 10% is greater than the UlBadQualHoIblerThd NO
parameter value, an uplink-quality-based blind handover is triggered for
the UE. If the uplink IBLER of a UE minus the target IBLER is less than
the UlBadQualHoIblerThd parameter value, the uplink-quality-based
handover is terminated for the UE.

Indicates the period during which the number of handovers is used to

determine whether a UE in RRC-CONNECTED mode moves at a high
speed. This parameter is one of the key parameters used for redirection
NO
of high-speed UEs, which are determined based on the number of
handovers in a specified period. This parameter applies only to LTE TDD
cells.

Indicates the number of handovers used to determine whether a UE in

RRC-CONNECTED mode moves at a high speed during a specified
period. This parameter is one of the key parameters used for redirection
of high-speed UEs, which are determined based on the number of
handovers in a specified period. If the number of handovers of a UE is NO
greater than the value of this parameter during the period specified by
the SpeedEvaluatedPeriod parameter, the UE is identified as a high-
speed UE and triggers a redirection to a high-speed frequency. This
parameter applies only to LTE TDD cells.
Indicates how measurement reports are handled in measurement-based
CSFB to UTRAN. If this parameter is set to
HANDOVER_IMMEDIATELY(Handover Immediately), an eNodeB
immediately performs handover decision after receiving a measurement
report for CSFB to UTRAN. If this parameter is set to
NO
BASED_ON_SIGNAL_STRENGTH(Based On Signal Strength), the
eNodeB hands over the UE to the strongest neighboring cell. If this
parameter is set to BASED_ON_FREQ_PRIORITY(Based On Freq
Priority), the eNodeB hands over the UE to a cell on a frequency with a
priority as high as possible.

Indicates the length of the timer that the eNodeB waits for the next
measurement report after receiving the first measurement report for NO
measurement-based CSFB to UTRAN.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES
Indicates the type of adaptive MIMO for a multi-antenna eNodeB. The
values are described as follows:
NO_ADAPTIVE: A fixed MIMO transmission mode is used. That is,
transition between MIMO transmission modes is not supported.
OL_ADAPTIVE: The open-loop adaptive MIMO transmission mode is
used. In this mode, UEs report RANK and CQI values but do not report
NO
PMI values to the eNodeB.
CL_ADAPTIVE: The closed-loop adaptive MIMO transmission mode is
used. In this mode, UEs report RANK, CQI, and PMI values to the
eNodeB.
OC_ADAPTIVE: UEs switch between the open-loop and closed-loop
adaptive MIMO transmission modes automatically.
Indicates the fixed MIMO transmission mode configured by a multi-
antenna eNodeB for UEs. This parameter is valid only when
MimoAdaptiveSwitch is set to NO_ADAPTIVE. There are four values.
TM2: Transmission mode 2 is permanently applied to UEs. NO
TM3: Transmission mode 3 is permanently applied to UEs.
TM4: Transmission mode 4 is permanently applied to UEs.
TM6: Transmission mode 6 is permanently applied to UEs.
Indicates the MIMO transmission mode used during initial network
access.
If this parameter is set to TM2(TM2), the MIMO transmission mode used
during initial network access is TM2.
If this parameter is set to ADAPTIVE(ADAPTIVE), the MIMO
transmission mode used during initial network access is determined by
the settings of the MimoAdaptiveSwitch and FixedMimoMode NO
parameters. If the MimoAdaptiveSwitch parameter is set to
NO_ADAPTIVE, the initial MIMO transmission mode is determined by
the setting of the FixedMimoMode parameter. If the MimoAdaptiveSwitch
parameter is set to OL_ADAPTIVE or OC_ADAPTIVE, the initial MIMO
transmission mode is TM3. If the MimoAdaptiveSwitch parameter is set
to CL_ADAPTIVE, the initial MIMO transmission mode is TM4.

Indicates the local ID of the cell, which uniquely identifies a cell within an
YES
eNodeB.
Indicates the frequency selection strategy of MLB for UEs in idle mode.
The value RESELPRIOBASED indicates that the target frequency for
MLB is selected for UEs in idle mode based on cell reselection priorities
NO
of frequencies. The value MLBPRIOBASED indicates that the target
frequency for MLB is selected for UEs in idle mode based on MLB
priorities of frequencies.This switch applies only to LTE TDD cells.
Indicates the protection mode for UEs that are transferred to a cell for
NO
MLB.
Indicates the length of duration in which UEs that are transferred to a cell
for MLB are not allowed to be transferred for MLB again. If this
parameter is set to 0, this protection timer is not used. This parameter NO
takes effect only for UEs that will be transferred to this cell for MLB after
the parameter is set.

Indicates the RSRP threshold for inter-frequency MLB-based hand-in

UEs to perform measurement event A1. This parameter is dedicated to NO
LTE TDD cells.
Indicates the RSRQ threshold for inter-frequency MLB-based hand-in
UEs to perform measurement event A1. This parameter is dedicated to NO
LTE TDD cells.

Indicates the RSRP threshold for inter-frequency MLB-based hand-in

UEs to perform measurement event A1. This parameter is dedicated to NO
LTE TDD cells.
Indicates the RSRQ threshold for inter-frequency MLB-based hand-in
UEs to perform measurement event A1. This parameter is dedicated to NO
LTE TDD cells.

Indicates the policies used in inter-RAT MLB.

If the UtranRedirectIMMCI option is selected, the eNodeB delivers
dedicated cell-reselection priorities of frequencies for "MLB to UTRAN by NO
transferring RRC_REL UEs" when redirections for MLB to UTRAN are
triggered.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the ID of the parameter group related to preallocations. YES

Indicates whether to enable or disable preallocation for a bearer with a
specified preallocation parameter group ID. If this parameter is set to
ON(On), preallocation is enabled for this bearer. If this parameter is set
NO
to OFF(Off), preallocation is disabled for this bearer. This switch is a
bearer-level switch and takes effect when the cell-level switch
PreAllocationSwitch in the CellAlgoSwitch MO is turned on.

Indicates whether smart preallocation is enabled or disabled for a bearer

with a specified preallocation parameter group ID when
PreAllocationSwitch is turned on. If both PreAllocationSwitch and
SmartPreAllocationSwitch are turned on, and
SmartPreAllocationDuration is set to a value greater than 0, uplink smart NO
preallocation is enabled; otherwise, uplink smart preallocation is
disabled. This switch is a bearer-level switch and takes effect when the
cell-level switch PreAllocationSwitch in the CellAlgoSwitch MO is turned
on.

Indicates the minimum interval between two preallocations, that is, the
interval between two times that a UE is preallocated must be larger than
this parameter value. When the DRX algorithm switch is on and the UE NO
is in DRX mode, the actual value of this parameter cannot be greater
than the DrxInactivityTimer parameter value.

Indicates the data amount preallocated to each UE. NO

Indicates the duration of each smart preallocation. NO

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates whether to enable SRS reporting period adaptation. If this

parameter is set to ON(On), the SRS reporting period adaptively
changes based on the SRS algorithm. If this parameter is set to NO
OFF(Off), the SRS reporting period is specified by the UserSrsPeriod
parameter.
Indicates the fixed SRS reporting period. This parameter takes effect
NO
only when the SrsPeriodAdaptive parameter is set to OFF(Off).

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates the maximum number of total inter-frequency and inter-RAT
measurement objects that can be contained in the measurement control NO
messages delivered for UEs in RRC_CONNECTED state.
Indicates the maximum number of E-UTRAN FDD frequencies
(excluding the frequency on which the serving cell works) that can be
NO
contained in the measurement control messages delivered to UEs in
RRC_CONNECTED state.
Indicates the maximum number of E-UTRAN TDD frequencies
(excluding the frequency on which the serving cell works) that can be
NO
contained in the measurement control messages delivered to UEs in
RRC_CONNECTED state.
Indicates the maximum number of UTRAN FDD frequencies that can be
contained in the measurement control messages delivered for UEs in NO
RRC_CONNECTED state.
Indicates the maximum number of UTRAN TDD frequencies that can be
contained in the measurement control messages delivered for UEs in NO
RRC_CONNECTED state.
Indicates the maximum number of GERAN frequencies that can be
contained in the measurement control messages delivered for UEs in NO
RRC_CONNECTED state.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the offset for UL CoMP event A3. A larger value indicates that a
neighboring cell must have better quality for the reporting of the event. NO
For details, see 3GPP TS 36.331.

Indicates the admission threshold for UL CoMP UEs in an SFN cell. NO

Indicates the offset for reporting the UL CoMP event. This offset is the
difference between the signal quality of a neighboring cell and that of the
serving cell. A larger value indicates that a neighboring cell must have NO
better quality for the reporting of the event. For details, see 3GPP TS
36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates whether a UE needs to adjust the transmit power based on the

MCS. The indication is sent to the UE through an RRC message. The
indication is denoted by a bit. Bit 0 indicates that both Ks and ΔTF are NO
equal to 0. Bit 1 indicates that Ks is equal to 1.25 and ΔTF is calculated.
For details, see 3GPP TS 36.213.
Indicates the power offset of the sounding reference signal to the
NO
PUSCH when DeltaMcsEnabled is set to UU_DISABLE.

Indicates the power offset of the sounding reference signal to the

NO
PUSCH when DeltaMcsEnabled is set to UU_ENABLE.
Indicates the alpha filtering coefficient used by the UE during RSRP
NO
measurement for path loss estimation.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the measurement object type for distance-based handovers.

NO
The measurement object type can be E-UTRAN, UTRAN, or GERAN.
Indicates the threshold for distance-based handovers. If the distance
between a UE and the cell center is greater than this threshold, a NO
distance-based handover is triggered for this UE.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the DRX parameter group. YES

Indicates whether bearers to which the parameter group applies support
DRX. The value ON indicates that the bearers support DRX. The value NO
OFF indicates that the bearers do not support DRX.
Indicates the length of the On Duration Timer. Because of the impact of
CQI reporting intervals and SRS transmission intervals, the actual value
NO
of this parameter assigned to a UE may be greater than the configured
value.
Indicates the length of the DRX inactivity timer. NO
Indicates the length of the DRX Retransmission Timer. NO
Indicates the length of the long DRX cycle. Because of the impact of the
SRS bandwidth and TA period specified by the TimeAlignmentTimer
parameter, the actual value of this parameter assigned to a UE may be
less than the configured value. In addition, the configured value will be
rounded down to an integral multiple of 10. Therefore, you are advised to
configure this parameter to a value that is an integral multiple of 10. If
users hope that the value actually assigned to a UE is equal to or greater
than 80 ms, set the TimeAlignmentTimer parameter to a value equal to
or greater than 10240 ms. If the TimingAdvCmdOptSwitch parameter is
set to ON, it is recommended that the LongDrxCycle parameter be set to NO
a value smaller than or equal to 320 ms. Otherwise, the uplink time
alignment performance of UEs is affected. If the
TimingAdvCmdOptSwitch parameter is set to ON, it is recommended
that the TimeAlignmentTimer parameter be set to sf10240. A smaller
value of the TimeAlignmentTimer parameter, such as sf5120, increases
the probability that UEs in DRX mode become uplink asynchronized. The
length of the long DRX cycle must be smaller than the length of the
PDCP packet discarding timer for the corresponding QCI. Otherwise,
packet loss occurs during a ping operation or low-traffic service.

Indicates whether short DRX cycles are enabled. NO

Indicates the length of the short DRX cycle. According to 3GPP
specifications, the length of a long DRX cycle must be an integer multiple
of that of a short DRX cycle. In addition, the actual value of
LongDrxCycle assigned to a UE may be less than the configured value NO
because of the impact of the SRS bandwidth and TA period specified by
the TimeAlignmentTimer parameter. Therefore, the actual value of
ShortDrxCycle assigned to a UE may be less than the configured value.
Indicates the length of the DRX Short Cycle Timer. If this parameter is
set to 1, the length of this timer is one short DRX cycle. If this parameter
is set to 2, the length of this timer is two short DRX cycles. If this
NO
parameter is set to a large value, a UE for which short DRX cycles are
enabled stays in short-cycle DRX for a long time. For details, see 3GPP
TS 36.321 5.7.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the received signal strength indicator (RSSI) of the GERAN

BCCH ARFCN that a UE needs to measure to determine whether it is YES
tolerant of the interference from the cells working on this frequency.

Indicates the GERAN band to which the absolute radio frequency

channel number (ARFCN) that the UE needs to measure belongs. If the
GERAN ARFCN is in the range of 512 to 810, the value of this parameter
is used to indicate whether the GERAN ARFCN is in the DCS 1800 MHz NO
band or the PCS 1900 MHz band. If the GERAN ARFCN is in neither
band, this parameter does not take effect and can be set to either value.
For details, see 3GPP TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the ID of the common parameter group related to inter-RAT
YES
handover.

Indicates the hysteresis of event A1/A2 for triggering inter-RAT

measurement. This parameter is used to prevent frequent triggering of
event evaluation caused by radio signal fluctuation. In this way, the NO
probability of ping-pong handovers or handover decision errors is
reduced. A larger value of this parameter results in a lower probability.
Indicates the time-to-trigger of event A1/A2 for triggering inter-RAT
measurement.
When detecting that the signal quality in the serving cell meets the
entering condition, the UE does not send a measurement report to the
eNodeB immediately. Instead, the UE sends a report only when the
NO
signal quality continuously meets the entering condition during the time-
to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers, and the number of
wrong handovers. In summary, it helps prevent unnecessary handovers.

Indicates the RSRP threshold for inter-RAT measurement event A1.

When the measured RSRP value of the serving cell exceeds this NO
threshold, an event A1 report will be sent.

Indicates the RSRQ threshold for inter-RAT measurement event A1.

When the measured RSRQ value of the serving cell exceeds this NO
threshold, an event A1 report will be sent.
Indicates the RSRP threshold for inter-RAT measurement event A2.
When the measured RSRP value of the serving cell is below this
threshold, an event A2 report will be sent. If you need to change the
NO
parameter value, you are advised to set this parameter to a value greater
than the value of the BlindHoA1A2ThdRsrp parameter in the
CellHoParaCfg MO.

Indicates the RSRQ threshold for inter-RAT measurement event A2.

When the measured RSRQ value of the serving cell is below this
threshold, an event A2 report will be sent. If you need to change the
NO
parameter value, you are advised to set this parameter to a value greater
than the value of the BlindHoA1A2ThdRsrq parameter in the
CellHoParaCfg MO.
Indicates the RSRP threshold 1 in the serving cell of event B2 for
triggering E-UTRAN-to-GERAN handovers.
When the measured RSRP in the serving cell is smaller than the value of NO
this parameter and the RSSI in the neighboring cell is larger than the
value of InterRatHoGeranB1Thd, the UE reports the event B2.

Indicates the RSRQ threshold 1 in the serving cell of event B2 for

triggering E-UTRAN-to-GERAN handovers.
When the measured RSRQ in the serving cell is smaller than the value NO
of this parameter and the RSSI in the neighboring cell is larger than the
value of InterRatHoGeranB1Thd, the UE reports the event B2.
Indicates the RSRP threshold 1 in the serving cell of event B2 for
triggering E-UTRAN-to-UTRAN handovers.
When the measured RSRP in the serving cell is smaller than the value of
NO
this parameter and the RSCP or Ec/N0 threshold in the neighboring cell
is larger than the value of InterRatHoUtranB1ThdRscp or
InterRatHoUtranB1ThdEcn0, the UE reports the event B2.

Indicates the RSRQ threshold 1 in the serving cell of event B2 for

triggering E-UTRAN-to-UTRAN handovers.
When the measured RSRQ in the serving cell is smaller than the value
NO
of this parameter and the RSCP or Ec/N0 threshold in the neighboring
cell is larger than the value of InterRatHoUtranB1ThdRscp or
InterRatHoUtranB1ThdEcn0, the UE reports the event B2.
Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to inter-RAT handover to

YES
CDMA2000 1xRTT.

Indicates the hysteresis for event B1 for inter-RAT handover to

CDMA2000 1xRTT. This parameter is used to prevent frequent triggering
of event evaluation caused by radio signal fluctuation. In this way, the
NO
probability of ping-pong handovers or handover decision errors is
reduced. A larger value of this parameter results in a lower probability of
ping-pong handovers or handover decision errors.
Indicates the pilot strength threshold for event B1 related to coverage-
based inter-RAT handover to CDMA2000 1xRTT. When the
NO
measurement value exceeds this threshold, a measurement report will
be sent.

Indicates the time-to-trigger for event B1 related to inter-RAT handover to

CDMA2000 1xRTT.
When detecting that the signal quality in at least one neighboring cell
meets the entering condition, the UE does not send a measurement
report to the eNodeB immediately. Instead, the UE sends a report only
NO
when the signal quality continuously meets the entering condition during
the time-to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers and the number of
wrong handovers, preventing unnecessary handovers.

Indicates the pilot strength threshold for event B1 related to load- or

service-based inter-RAT handover to CDMA2000 1xRTT.
NO
When the measurement value exceeds this threshold, a measurement
report will be sent.

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the RLF timer and constants group ID. YES

Indicates the length of the timer T301. For details, see 3GPP TS 36.331. NO

Indicates the length of the timer T310. For details, see 3GPP TS 36.331. NO
Indicates the length of the timer T311. For details, see 3GPP TS 36.331. NO

Indicates the maximum number of successive "out of sync" indications

NO
received from L1. For details, see 3GPP TS 36.331.

Indicates the maximum number of successive "in sync" indications

NO
received from L1. For details, see 3GPP TS 36.331.

Indicates the extended QoS Class Identifier (QCI), which is required by

YES
the operator for service differentiation.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of a parameter group related to inter-frequency

NO
handover.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
CDMA2000 1xRTT.
Indicates the ID of a parameter group related to inter-RAT handover to
NO
CDMA2000 HRPD.

Indicates the ID of a group of common parameters related to inter-RAT

NO
handover.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
GERAN.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
UTRAN.

Indicates the ID of a parameter group related to intra-frequency

NO
handover.

Indicates the ID of a DRX parameter group. NO

Indicates the RLF timer and constants indication. NO

Indicates the RLF timer and constants group ID. NO

Indicates the waiting duration for the eNodeB to release services with a
specific QCI after the eNodeB detects that the radio link is abnormal.
When the eNodeB detects that the radio link is abnormal, the eNodeB
NO
waits for the UE to initiate an RRC connection reestablishment
procedure to restore services. If the waiting duration times out, the
eNodeB releases the services.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the QoS class identifier (QCI) of an evolved packet system

(EPS) bearer. Different QCIs indicate different QoS requirements, such
YES
as the packet delay budget, packet error loss rate, and resource type.
For details, see Table 6.1.7 in 3GPP TS 23.203.

Indicates the ID of a parameter group related to inter-frequency

NO
handovers.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
CDMA2000 1xRTT.
Indicates the ID of a parameter group related to inter-RAT handover to
NO
CDMA2000 HRPD.

Indicates the ID of a common parameter group related to inter-RAT

NO
handover.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
GERAN.

Indicates the ID of a parameter group related to inter-RAT handover to

NO
UTRAN.

Indicates the ID of a parameter group related to intra-frequency

NO
handover.

Indicates the ID of a DRX parameter group. NO

Indicates the interval at which scheduling request indicators are sent. NO

Indicates the RLF timer and constants indication. NO

Indicates the RLF timer and constants group ID. NO

Indicates the waiting duration for the eNodeB to release services with a
specific QCI after the eNodeB detects that the radio link is abnormal.
When the eNodeB detects that the radio link is abnormal, the eNodeB
NO
waits for the UE to initiate an RRC connection reestablishment
procedure to restore services. If the waiting duration times out, the
eNodeB releases the services.

Indicates the QCI priority used by each QCI-based handover algorithm. A

larger value of this parameter indicates a lower priority. This parameter
applies to handover parameter selection based on QCI priorities, target
frequency selection in service-based inter-frequency handovers, and
NO
inter-RAT handover policy selection. For a service that involves all the
preceding selection, the setting of this parameter determines the
handover parameter, target frequency, and handover policy
corresponding to a QCI.

Indicates the ID of a mobility load balancing (MLB) parameter group for a

QCI. The value 255 is invalid. If this parameter is set to a value ranging
from 0 to 9, the ID must be set in the associated MlbQciGroup MO. This NO
parameter is valid only when the Qci parameter in the CellStandardQci
MO is set to 6, 7, 8, or 9. This parameter is valid only for LTE TDD cells.
Indicates the ID of the parameter group related to preallocations. The
NO
value 255 indicates an invalid preallocation parameter group.

Indicates the QCI-specific priority for selecting a DRX parameter group.A

larger value of this parameter indicates a lower priority. If the bearers for
a UE have multiple QCIs and the DrxPolicyMode parameter is set to NO
QCIPRIORITY(QCI priority), the eNodeB selects the DRX parameter
group for the UE based on the QCI-specific priorities.

Indicates QCI-specific algorithm switches. This parameter applies only to

LTE TDD cells.
INTER_FREQ_MLB_ALLOWED(INTER_FREQ_MLB_ALLOWED): If NO
this option is selected, inter-frequency mobility load balancing is allowed
for the QCI.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to inter-RAT handover to

YES
CDMA2000 HRPD.
Indicates the hysteresis for event B1 related to inter-RAT handover to
CDMA2000 HRPD. This parameter is used to prevent frequent triggering
of event evaluation caused by radio signal fluctuation. In this way, the
NO
probability of ping-pong handovers or handover decision errors is
reduced. A larger value of this parameter results in a lower probability of
ping-pong handovers or handover decision errors.

Indicates the pilot strength threshold for event B1 related to load- or

service-based inter-RAT handover to CDMA2000 HRPD.
NO
When the measurement value exceeds this threshold, a measurement
report will be sent.

Indicates the time-to-trigger for event B1 related to inter-RAT handover to

CDMA2000 HRPD.
When detecting that the signal quality in at least one neighboring cell
meets the entering condition, the UE does not send a measurement
report to the eNodeB immediately. Instead, the UE sends a report only
NO
when the signal quality continuously meets the entering condition during
the time-to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers and the number of
wrong handovers, preventing unnecessary handovers.
Indicates the pilot strength threshold for event B1 related to load- or
service-based inter-RAT handover to CDMA2000 HRPD.
NO
When the measurement value exceeds this threshold, a measurement
report will be sent.

Indicates the B2 RSRP threshold 1 used during optimized handovers

NO
from E-UTRAN to CDMA2000 eHRPD.

Indicates the B2 RSRQ threshold 1 used during optimized handovers

NO
from E-UTRAN to CDMA2000 eHRPD.

Indicates the RSRP threshold for event B2 related to measurement-

NO
based non-optimized handovers from E-UTRAN to CDMA2000 eHRPD.

Indicates the RSRQ threshold for event B2 related to measurement-

NO
based non-optimized handovers from E-UTRAN to CDMA2000 eHRPD.
Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to inter-RAT handover to

YES
GERAN.

Indicates the hysteresis for event B1 related to inter-RAT handover to

GERAN. This parameter is used to prevent frequent triggering of event
evaluation caused by radio signal fluctuation. In this way, the probability
NO
of ping-pong handovers or handover decision errors is reduced. A larger
value of this parameter results in a lower probability of ping-pong
handovers or handover decision errors.

Indicates the RSSI threshold for event B1 related to coverage-based

inter-RAT handover to GERAN.
A UE sends a measurement report related to event B1 to the eNodeB NO
when the RSSI in at least one GERAN cell exceeds this threshold and
other triggering conditions are met. For details, see 3GPP TS 36.331.
Indicates the time-to-trigger for event B1 related to inter-RAT handover to
GERAN. When detecting that the signal quality in at least one
neighboring cell meets the entering condition, the UE does not send a
measurement report to the eNodeB immediately. Instead, the UE sends
a report only when the signal quality continuously meets the entering NO
condition during the time-to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers and the number of
wrong handovers, preventing unnecessary handovers.

Indicates the RSSI threshold for event B1 related to load- or service-

based inter-RAT handover to GERAN.
NO
When the measured RSSI value exceeds this threshold, a measurement
report will be sent.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to inter-RAT handover to

YES
UTRAN.

Indicates the Ec/N0 threshold for event B1 related to coverage-based

inter-RAT handover to UTRAN. This parameter specifies the requirement
for Ec/N0 of the target UTRAN cell. For a cell with large signal fading
variance, set this parameter to a large value to prevent unnecessary
handovers. For a cell with small signal fading variance, set this NO
parameter to a small value to ensure timely handovers. A large value of
this parameter results in a low probability of handover to the UTRAN cell,
and a small value leads to a high probability. When the measurement
value exceeds this threshold, a measurement report will be sent.
Indicates the RSCP threshold for event B1 related to coverage-based
inter-RAT handover to UTRAN.
This parameter specifies the requirement for RSCP of the target UTRAN
NO
cell.
When the measurement value exceeds this threshold, a measurement
report will be sent.

Indicates the hysteresis for event B1 related to inter-RAT handover to

UTRAN. This parameter is used to prevent frequent triggering of event
evaluation caused by radio signal fluctuation. In this way, the probability
NO
of ping-pong handovers or handover decision errors is reduced. A larger
value of this parameter results in a lower probability of ping-pong
handovers or handover decision errors.

Indicates the time-to-trigger for event B1 related to inter-RAT handover to

UTRAN. When detecting that the signal quality in at least one
neighboring cell meets the entering condition, the UE does not send a
measurement report to the eNodeB immediately. Instead, the UE sends
a report only when the signal quality continuously meets the entering NO
condition during the time-to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers and the number of
wrong handovers, preventing unnecessary handovers.
Indicates the Ec/N0 threshold for event B1 related to load- or service-
based inter-RAT handover to UTRAN.
This parameter specifies the requirement for Ec/N0 of the target UTRAN
cell. When the measurement value exceeds this threshold, a
NO
measurement report may be sent. For a cell with large signal fading
variance, set this parameter to a large value to prevent unnecessary
handovers. For a cell with small signal fading variance, set this
parameter to a small value to ensure timely handovers.

Indicates the RSCP threshold for event B1 related to load- or service-

based inter-RAT handover to UTRAN.
This parameter specifies the requirement for RSCP of the target UTRAN
NO
cell.
When the measurement value exceeds this threshold, a measurement
report will be sent.
Indicates the local ID of the cell, which uniquely identifies a cell within an
YES
eNodeB.

Indicates the ID of the eNodeB to which the candidate secondary serving

YES
cell (SCell) belongs.
Indicates the local cell ID of the candidate secondary serving cell (SCell). YES

Indicates whether this candidate secondary serving cell (SCell) can be

configured as an SCell for carrier aggregation (CA) UEs in a blind
manner.
This parameter is controlled by the SccBlindCfgSwitch option of the
CaAlgoSwitch parameter if the FreqCfgSwitch of the same parameter is
deselected, and this parameter is valid only if the SccBlindCfgSwitch
option is selected.This parameter is not controlled by the
SccBlindCfgSwitch option of the CaAlgoSwitch parameter if the
AdpCaSwitch option of the same parameter is selected. NO
If this parameter is set to TRUE(TRUE), the eNodeB can configure this
candidate SCell as an SCell for CA UEs in a blind manner, without
delivering A4-related measurement configurations to CA UEs. If this
parameter is set to FALSE(FALSE), the eNodeB cannot configure this
candidate SCell as an SCell for CA UEs. When the eNodeB configures
an SCell for CA UEs, the eNodeB need to deliver A4-related
measurement configurations on the frequency on which the SCell
operates.
Indicates the priority of the candidate secondary serving cell (SCell). A
larger value of this parameter indicates a higher priority and results in a
higher probability of being configured as an SCell for carrier aggregation NO
(CA) UEs.The value 0 indicates that this cell cannot be configured as an
SCell for CA UEs.

This parameter specifies the offset to CarrAggrA4ThdRsrp. When a CA

UE treats the cell specified by the LocalCellId parameter in the local
eNodeB as its PCell, the UE reports event A4 pertaining to the candidate
SCell specified by the SCelleNodeBId and SCellLocalCellId parameters
NO
to the eNodeB if the RSRP for the candidate SCell exceeds the sum of
the CarrAggrA4ThdRsrp and SCellA4Offset parameter values. If the sum
is greater than –43 dBm or less than –140 dBm, the threshold for event
A4 takes the value –43 dBm or –140 dBm, respectively.
Indicates the offset to CarrAggrA2ThdRsrp. When a CA UE treats the
cell specified by the LocalCellId parameter in the local eNodeB as its
PCell, the UE reports event A2 pertaining to the candidate SCell
specified by the SCelleNodeBId and SCellLocalCellId parameters to the
NO
eNodeB if the RSRP for the candidate SCell exceeds the sum of the
CarrAggrA2ThdRsrp and SCellA2Offset parameter values. If the sum is
greater than –43 dBm or less than –140 dBm, the threshold for event A2
takes the value –43 dBm or –140 dBm, respectively.

Indicates the local ID of the cell, which uniquely identifies a cell within an
YES
eNodeB.

Indicates the offset for event A3. This offset is the difference between the
signal quality of a neighboring cell and that of the serving cell. A larger
NO
value indicates a higher requirement on neighboring cell quality for
reporting event A3.

Indicates the hysteresis for reporting event A3 or A6. This parameter is

used to prevent frequent entering or leaving of event A3 or A6 and
NO
decision errors due to radio signal fluctuation. For details, see 3GPP TS
36.331.
Indicates the time-to-trigger for reporting event A3 or A6. When detecting
that the signal quality in the serving cell and that in at least one
neighboring cell meet the entering condition, the UE does not report the
NO
event to the eNodeB immediately. Instead, the UE reports the event only
when the signal quality continuously meets the entering condition during
the time-to-trigger.

Indicates the maximum number of cells to be included in each

measurement report after event A3 or A6 is triggered. For details, see NO
3GPP TS 36.331.

Indicates the number of periodic measurement reports that are sent after
NO
event A3 or A6 is triggered. For details, see 3GPP TS 36.331.
Indicates the interval between periodic measurement reports that are
NO
sent after event A3 or A6 is triggered. For details, see 3GPP TS 36.331.

Indicates the type of the value to be included in the measurement report

after event A3 or A6 is triggered, which can be set to
SAME_AS_TRIG_QUAN(Same as Trig Quan) or BOTH(Both). The value
SAME_AS_TRIG_QUAN(Same as Trig Quan) indicates that the type of
the value to be included in the measurement report is the same as that
specified by the TriggerQuantity parameter. The value BOTH(Both) NO
indicates that both RSRP and RSRQ values are included in the
measurement report. The measured RSRP values are stable, slightly
varying with the load, and therefore there is little signal fluctuation. The
measured RSRQ values vary with the load and are likely to reflect the
signal quality of the cell in real time. For details, see 3GPP TS 36.331.

Indicates whether event A3 or A6 is triggered based on RSRP or RSRQ

values. The measured RSRP values are stable, slightly varying with the
load, and therefore there is little signal fluctuation. The measured RSRQ NO
values vary with the load and are likely to reflect the signal quality of the
cell in real time.
Indicates the offset for event A6. This offset is the difference between the
signal quality of a neighboring cell and that of the serving cell. A larger
NO
value indicates a higher requirement on neighboring cell quality for
reporting event A6.

Indicates the maximum number of intra-frequency cells to be included in

each intra-frequency periodic measurement report. For details, see NO
3GPP TS 36.331.

Indicates the quantity used to evaluate the triggering condition for the
intra-frequency periodic measurement. The quantity can be RSRP or
RSRQ. The measured RSRP values are stable, slightly varying with the
NO
load, and therefore there is little signal fluctuation. The measured RSRQ
values vary with the load and are likely to reflect the signal quality of the
cell in real time. For details, see 3GPP TS 36.331.
Indicates the reporting quantity to be included in the intra-frequency
periodic measurement report. It can be either the same as the triggering
quantity for intra-frequency periodic measurement reports or both RSRP
and RSRQ. The value SAME_AS_TRIG_QUAN(Same as Trig Quan)
indicates that the quantity to be included in the measurement report is
the same as that specified by the IntraFreqTriggerQuantity parameter.
NO
The value BOTH(Both) indicates that both RSRP and RSRQ values are
included in the measurement report. The measured RSRP values are
stable, slightly varying with the load, and therefore there is little signal
fluctuation. The measured RSRQ values vary with the load and are likely
to reflect the signal quality of the cell in real time. For details, see 3GPP
TS 36.331.

Indicates the maximum number of inter-frequency cells to be included in

each inter-frequency periodic measurement report. For details, see NO
3GPP TS 36.331.
Indicates the quantity used to evaluate the triggering condition for the
inter-frequency periodic measurement. The quantity can be RSRP or
RSRQ. The measured RSRP values are stable, slightly varying with the
NO
load, and therefore there is little signal fluctuation. The measured RSRQ
values vary with the load and are likely to reflect the signal quality of the
cell in real time. For details, see 3GPP TS 36.331.

Indicates the reporting quantity to be included in the inter-frequency

periodic measurement report. It can be either the same as the triggering
quantity for inter-frequency periodic measurement reports or both RSRP
and RSRQ. The value SAME_AS_TRIG_QUAN(Same as Trig Quan)
indicates that the quantity to be included in the measurement report is
the same as that specified by the InterFreqTriggerQuantity parameter.
NO
The value BOTH(Both) indicates that both RSRP and RSRQ values are
included in the measurement report. The measured RSRP values are
stable, slightly varying with the load, and therefore there is little signal
fluctuation. The measured RSRQ values vary with the load and are likely
to reflect the signal quality of the cell in real time. For details, see 3GPP
TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to inter-frequency

YES
handover.
Indicates the hysteresis of event A1/A2 for triggering inter-frequency
measurement. This parameter is used to prevent frequent triggering of
event evaluation caused by radio signal fluctuation. In this way, the NO
probability of ping-pong handovers or handover decision errors is
reduced. A larger value of this parameter results in a lower probability.

Indicates the time-to-trigger of event A1/A2 for triggering inter-frequency

measurement.
When detecting that the signal quality in the serving cell meets the
entering condition, the UE does not send a measurement report to the
eNodeB immediately. Instead, the UE sends a report only when the
NO
signal quality continuously meets the entering condition during the time-
to-trigger. This parameter helps decrease the number of occasionally
triggered event reports, the average number of handovers, and the
number of wrong handovers. In summary, it helps prevent unnecessary
handovers.
Indicates the RSRP threshold for event A1 related to event-A4/A5-
triggered inter-frequency handover.
NO
When the measured RSRP value exceeds this threshold, a
measurement report will be sent.

Indicates the RSRQ threshold for event A1 related to event-A4/A5-

triggered inter-frequency handover.
NO
When the measured RSRQ value exceeds this threshold, a
measurement report will be sent.
Indicates the RSRP threshold for event A2 related to event-A4/A5-
triggered inter-frequency handover.
NO
When the measured RSRP value is lower than this threshold, a
measurement report will be sent.

Indicates the RSRQ threshold for event A2 related to event-A4/A5-

triggered inter-frequency handover.
NO
When the measured RSRQ value is lower than this threshold, a
measurement report will be sent.
Indicates the hysteresis for event A4. This parameter is used to prevent
frequent triggering of event evaluation caused by radio signal fluctuation.
In this way, the probability of ping-pong handovers or handover decision NO
errors is reduced. A larger value of this parameter results in a lower
probability.

Indicates the RSRP threshold for event A4 related to coverage-based

inter-frequency handover. When the measured RSRP value exceeds this
threshold, event A4 is reported. The value of this parameter is also used
NO
as the RSRP threshold for event A4 related to distance-based, UL-
power-based, or SPID-based inter-frequency handover back to the
HPLMN.
Indicates the RSRQ threshold for event A4 related to coverage-based
inter-frequency handover. When the measured RSRQ value exceeds this
threshold, event A4 is reported. The value of this parameter is also used
NO
as the RSRQ threshold for event A4 related to distance-based, UL-
power-based, or SPID-based inter-frequency handover back to the
HPLMN.

Indicates the time-to-trigger for event A4 for the inter-frequency

handover. When detecting that the signal quality in at least one
neighboring cell meets the entering condition, the UE does not send a
measurement report to the eNodeB immediately. Instead, the UE sends
a report only when the signal quality continuously meets the entering NO
condition during the time-to-trigger.
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers, and the number of
wrong handovers. In summary, it helps prevent unnecessary handovers.

Indicates the RSRP threshold for event A4 related to load-based inter-

frequency handover. When the measured RSRP value exceeds this
threshold, event A4 is reported. The value of this parameter is also used
NO
as the RSRP threshold for event A4 related to frequency-priority-based
handover, service-based inter-frequency handover, inter-frequency
handover of low-speed UEs, or redirection of high-speed UEs.
Indicates the RSRQ threshold for event A4 related to load-based inter-
frequency handover. When the measured RSRQ value exceeds this
threshold, event A4 is reported. The value of this parameter is also used
NO
as the RSRQ threshold for event A4 related to frequency-priority-based,
service-based inter-frequency handover, inter-frequency handover of
low-speed UEs, or redirection of high-speed UEs.

Indicates the RSRP threshold for frequency-priority-based inter-

frequency measurement event A1. When the measured RSRP value NO
exceeds this threshold, an event A1 report will be sent.

Indicates the RSRQ threshold for frequency-priority-based inter-

frequency measurement event A1.
NO
When the measured RSRQ value exceeds this threshold, an event A1
report will be sent.

Indicates the offset for event A3 associated with inter-frequency

handover. This parameter determines the border between the serving
cell and the neighboring cell. If the parameter is set to a large value, an
NO
inter-frequency handover is performed only when the signal quality of the
neighboring cell is significantly better than that of the serving cell and
other triggering conditions are met. For details, see 3GPP TS 36.331.
Indicates the RSRP threshold for event A1 related to event-A3-triggered
inter-frequency handover. When the measured RSRP value exceeds this NO
threshold, a measurement report will be sent.

Indicates the RSRP threshold for event A2 related to event-A3-triggerd

inter-frequency handover. When the measured RSRP value is lower than NO
this threshold, a measurement report will be sent.

Indicates the RSRP threshold for frequency-priority-based inter-

frequency measurement event A2.
NO
If the measured RSRP value is less than this threshold, an event A2
report will be sent.
Indicates the RSRQ threshold for inter-frequency measurement event
A2.
NO
When the measured RSRQ value is below this threshold, a
measurement report will be sent.
Indicates the RSRP threshold for the A1/A2 event that is used for
location-based UE priority selection during MLB that is based on the
number of UEs performing downlink data transmission. If cell center
users are preferably selected, the UEs whose RSRP values are higher
NO
than this threshold and reports A1 events are selected to perform MLB. If
cell edge users are preferably selected, the UEs whose RSRP values
are lower than this threshold and reports A2 events are selected to
perform MLB. This parameter is set only for TDD cells.

Indicates the RSRP threshold 1 in the serving cell of event A5 for

triggering inter-frequency handovers.
When the measured RSRP in the serving cell is smaller than the value of
NO
this parameter and the RSRP or RSRQ in the neighboring cell is higher
than the value of InterFreqHoA4ThdRsrp or InterFreqHoA4ThdRsrq, the
UE reports event A5.
Indicates the RSRQ threshold 1 in the serving cell of event A5 for
triggering inter-frequency handovers.
When the measured RSRQ in the serving cell is smaller than the value
NO
of this parameter and the RSRP or RSRQ in the neighboring cell is
higher than the value of InterFreqHoA4ThdRsrp or
InterFreqHoA4ThdRsrq, the UE reports event A5.

Indicates the threshold of event A4 for triggering service-request-based

inter-frequency handovers.
If the RSRP in the neighboring cell is greater than this parameter value,
the UE reports event A4. NO
A small value of this parameter increases the possibility of triggering a
handover while a large value of this parameters reduces the possibility of
triggering a handover. This parameter is valid only for LTE TDD cells.
Indicates the threshold of event A4 for triggering service-request-based
inter-frequency handovers.
If the RSRQ in the neighboring cell is greater than this parameter value,
the UE reports event A4. NO
A small value of this parameter increases the possibility of triggering a
handover while a large value of this parameters reduces the possibility of
triggering a handover. This parameter is valid only for LTE TDD cells.
Indicates the RSRP threshold 1 of the serving cell for event A5 related to
inter-frequency measurements for MLB. If the measured RSRP of the
serving cell is lower than the MlbInterFreqHoA5Thd1Rsr parameter value
NO
and the measured RSRP of a neighboring cell is higher than the
InterFreqLoadBasedHoA4ThdRsrp parameter value, the UE reports
event A5.
Indicates the RSRQ threshold 1 of the serving cell for event A5 related to
inter-frequency measurements for MLB. If the measured RSRQ of the
serving cell is lower than the MlbInterFreqHoA5Thd1Rsr parameter value
NO
and the measured RSRQ of a neighboring cell is higher than the
InterFreqLoadBasedHoA4ThdRsrq parameter value, the UE reports
event A5.
Indicates the offset of the A4 threshold of the target cell related to UL-
quality-based inter-frequency handovers to the A4 threshold related to
coverage-based inter-frequency handovers. This offset applies to RSRP-
and RSRQ-based A4 thresholds. The actual threshold for event A4 is
equal to the sum of the threshold for event A4 related to coverage-based NO
inter-frequency handovers and the UlBadQualHoA4Offset parameter
value. If the sum is less than the 3GPP-defined minimum value or
greater than the 3GPP-defined maximum value, the 3PGG-defined
minimum or maximum value is delivered, respectively.

Indicates the RSRQ threshold for event A1 related to event-A3-triggered

NO
inter-frequency handover.

Indicates the RSRQ threshold for event A2 related to event-A3-triggered

NO
inter-frequency handover.
Indicates the RSRP threshold for triggering inter-frequency measurement
event A4 during handovers for uplink heavy traffic-based MLB. When the
measured RSRP exceeds the threshold specified by this parameter, NO
inter-frequency measurement event A4 is reported. This parameter
applies only to LTE TDD networks.

Indicates the RSRQ threshold for triggering inter-frequency

measurement event A4 during MLB-oriented handovers in uplink heavy-
traffic scenarios. When the measured RSRQ exceeds the threshold NO
specified by this parameter, inter-frequency measurement event A4 is
reported. This parameter applies only to LTE TDD networks.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ID of the parameter group related to intra-frequency

YES
handover.
Indicates the hysteresis for intra-frequency handover event A3. This
parameter decreases frequent event triggering due to radio signal
fluctuations and reduces the probability of handover decision errors and
ping-pong handovers. A larger value of this parameter results in a lower NO
probability. The hysteresis for event inter-frequency handover event A3 is
the same as the value of this parameter. For details, see 3GPP TS
36.331.

Indicates the offset for event A3. If the parameter is set to a large value,
an intra-frequency handover is performed only when the signal quality of
NO
the neighboring cell is significantly better than that of the serving cell and
other triggering conditions are met. For details, see 3GPP TS 36.331.

Indicates the time-to-trigger for intra-frequency handover event A3.

When the UE detects that the signal quality in the serving cell and that in
at least one neighboring cell meet the entering condition, it does not
immediately send a measurement report to the eNodeB. Instead, the UE
sends a report only when the signal quality meets the entering condition
throughout the time-to-trigger. NO
This parameter helps decrease the number of occasionally triggered
event reports, the average number of handovers, and the number of
incorrect handovers, preventing unnecessary handovers. The time-to-
trigger for inter-frequency handover event A3 is the same as the value of
this parameter.
Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the QoS class identifier (QCI) of an evolved packet system

(EPS) bearer. Different QCIs indicate different QoS requirements, such
YES
as the packet delay budget, packet error loss rate, and resource type.
For details, see Table 6.1.7 in 3GPP TS 23.203.

Indicates reserved 32-bit switch parameter 0 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates the index of the operator. YES

Indicates the name of the operator. NO

Indicates the type of the operator. The operator can be the primary
operator or a secondary operator. For each eNodeB, only one primary NO
operator but more than one secondary operator can be configured.

Indicates the mobile country code (MCC) of the operator. NO

Indicates the mobile network code (MNC) of the operator. The value of
this parameter is a string of two or three characters, each of which must NO
be a digit in the range from 0 to 9.

Indicates the ID of the IP path. YES

Indicates the ID of the operator. NO

Indicates the tracking area ID, which uniquely identifies an entry of

tracking area information. This parameter is used only within the eNodeB
YES
and is not used during the information exchange with the EPC. This is
different from the TAI configured in the EPC TAL.
Indicates the index of the operator. NO

Indicates the tracking area code (TAC), which is used by the EPC to
determine the area within which paging messages are sent. One tracking
area is comprised of one or more cells. Two TAC values 0x0000(0) and
NO
0xFFFE(65534) are reserved according to the protocol and will not be
used in future versions. Therefore, do not use 0 or 65534 as a TAC value
in TAC planning or configuration.

Indicates the ID of a carrier-sharing operator group. This parameter

YES
uniquely specifies a carrier-sharing operator group.

Indicates the ID of the primary operator in a carrier-sharing operator

NO
group.

Indicates the list of secondary operators in a carrier-sharing operator

NO
group.

Indicates the ID of a secondary operator in a carrier-sharing operator

YES
group.
Indicates the id of the operator. YES

Indicates whether to enable or disable emergency calls. It is

recommended that this parameter be set to a value in accordance with NO
the actual emergency call capability of the operator.
Indicates whether the operator supports emergency calls initiated by
NO
UEs in the limited service state.
Indicates the Allocation and Retention Priority (ARP) value of the
NO
dedicated emergency call bearer.
Indicates the Allocation and Retention Priority (ARP) value of the default
NO
emergency call bearer.

Indicates the mode of outputting call history records

(CHRs).ALL_OUTPUT means both normal and abnormal calls are
output. When there is no storage space for new CHRs, a new record will
cover the beginning one.ABNORMAL_NORMAL_SAMPLE means calls
are output based on the storage space and the proportion of normalcalls NO
to abnormal calls. Ensure that CHR recording time meets the
requirement.ABNORMAL_ALL_NORMAL_SAMPLE means all abnormal
calls are output and the normal calls are output based on the proportion
of normal calls to abnormal calls.

Indicates the percentage of CHRs for abnormal calls in the CHR output.
For example, if this parameter is set to 90, the percentage of CHRs for
abnormal calls in the CHR output is 90%, and that of CHRs for normal
calls is 10%. This parameter is invalid when the OutPutMode parameter NO
is set to ALL_OUTPUT(All Output). This parameter takes effect
immediately after being set or modified, and the CHR output will be
refreshed.
Indicates the maximum number of call history records (CHRs) that can
be stored. For example, if this parameter is set to 4000, 4000 CHRs can
be stored. (The size of a CHR for one call is about 6 KB, and the storage
space is 24 MB.) This parameter is invalid if the OutPutMode parameter
is set to ALL_OUTPUT or ABNORMAL_ALL_NORMAL_SAMPLE. If the NO
OutPutMode parameter is set to ABNORMAL_NORMAL_SAMPLE, the
value of this parameter indicates the expected number of CHRs that can
be stored, which should be set based on the actual storage space and
the size of a CHR.

Indicates the time when CHRs are uploaded. If this parameter is set to
FIXED_TIME, CHRs are uploaded at a fixed time based on the standard
NO
time. If this parameter is set to NON_FIXED_TIME, CHRs are uploaded
at a specific interval since system startup.

Indicates the eNodeB sharing mode, which can be independent mode,

RAN sharing with common carriers, RAN sharing with dedicated carriers, NO
or hybrid RAN sharing.

Indicates whether to enable or disable X2 setup by SON. NO

Indicates the method of X2 setup by SON, that is, the method of

automatically setting up X2 interfaces. The value X2_OVER_OSS can
NO
be set only for Huawei eNodeBs, and the value X2_OVER_S1 can be
set for eNodeBs of any vendor.

Indicates whether to enable scheduling request indication (SRI)

adaptation. If this switch is turned on, the SRI period adaptively changes
NO
based on the SRI algorithm. If this switch is turned off, the SRI period is
the value of the SriPeriod parameter in the CellStandardQci MO.
Indicates the logical channel group configuration.
Currently, three logical channel group profiles are available. If this
parameter is set to LCG_PROFILE_0, the control-plane services (SRB1,
SRB2, and bearers with a QCI of 5), VoIP services (bearers with a QCI
of 1), GBR services, and non-GBR services are assigned logical channel
groups 0, 1, 2, and 3, respectively.
If this parameter is set to LCG_PROFILE_1, the control-plane services,
VoIP services, GBR services, high-priority non-GBR services, and low-
priority non-GBR services are assigned logical channel groups 0, 1, 2,
NO
and 3, respectively.
If this parameter is set to LCG_PROFILE_2, the control-plane services,
VoIP services, high-priority non-GBR services, and low-priority non-GBR
services are assigned logical channel groups 0, 1, 2, 3, respectively. In
addition, services with a QCI of 2 to 4 are also assigned logical channel
group 1. If this parameter is set to LCG_PROFILE_2, VoIP services must
be carried by bearers with a QCI of 1 and bearers with a QCI of 2 to 4
are not used. The parameter value LCG_PROFILE_2 does not apply to
LTE TDD.

Indicates whether to enable or disable RAN information management

(RIM) for handovers within an RNC pool. An RNC pool can be used for
NO
load balancing between RNCs. An RNC can take over a cell that was
controlled by another RNC in the pool.
Indicates whether the eNodeB simultaneously sends Uu messages
during security mode activation and reconfiguration. If this switch is
NO
turned on, the eNodeB simultaneously sends Uu messages. If this switch
is turned off, the eNodeB sends Uu messages one by one.
Indicates whether the eNodeB automatically updates the configuration of
neighboring cells based on the messages received over the X2 interface.
The messages include X2 SETUP REQUEST, X2 SETUP RESPONSE,
and ENB CONFIGURATION UPDATE.
Turn off the switch if the eNodeB configuration data on a network is to be
modified by using the interlocking modification function on the CME and
modifications to the parameters of a neighboring eNodeB will be updated
on the local eNodeB through messages over the X2 interface. These
NO
parameters include eNodeBId, CellId, LocalCellId, CnOperator,
CnOperatorTa, CellOp, PhyCellId, and DlEarfcn. This prevents the
configuration data from being lost or abnormal during the automatic
update.
This switch must be turned on if the interlocking modification function on
the CME is not used and the eNodeB configuration data on a network is
to be modified by using the automatic eNodeB configuration update over
the X2 interface.

Indicates whether to enable the X2 interface self-setup function for the

NO
target operator.

Indicates whether to select transport network layer (TNL) parameters

based on the primary PLMN ID or selected PLMN ID that contained in
the SON configuration message. This parameter is used for X2 self-
setup in RAN sharing scenarios. Selecting TNL parameters based on the
NO
primary PLMN ID applies to X2 self-setup between eNodeBs provided by
different suppliers. For X2 self-setup between Huawei eNodeBs,
selecting TNL parameters based on the selected PLMN ID is used in
preference.

Indicates the UMTS load transmission channel. The eNodeB sends

RAN-INFORMATION-REQUEST PDUs to UTRAN cells to request
multiple reports on the load status of UTRAN cells only when the NO
parameter is set to BASED_ON_RIM.The function specified by the
parameter value BASED_ON_ECO is temporarily unavailable.
Indicates the switch used to control the data forwarding mechanism in
S1-based incoming handovers.
If the switch is turned off, uplink data forwarding and downlink data
forwarding are separately determined. The target eNodeB can choose to
send both the uplink and downlink destination addresses, not send the
uplink and downlink destination addresses, or send only the uplink or
downlink destination address to the source eNodeB. NO
If the switch is turned on, uplink data forwarding and downlink data
forwarding are determined together. The target eNodeB can choose to
send both the uplink and downlink destination addresses, not send the
uplink and downlink destination addresses, or send only the downlink
destination address to the source eNodeB. The target eNodeB cannot
send only the uplink destination address to the source eNodeB.

Indicates the RRC connection reestablishment protection threshold. UE

manufacturers may have different understanding of protocols, and
therefore UE compliance with protocols varies and may be different from
eNodeB compliance with the same protocols. After a UE initiates an
RRC connection reestablishment procedure due to
reconfigurationFailure and the reestablishment is complete, the
subsequent RRC connection reconfiguration may fail again. As a result,
the UE initiates an RRC connection reestablishment procedure again. If
NO
this repeatedly happens, the UE repeatedly initiates RRC connection
reestablishment. If this parameter is set to 0, the function of RRC
connection reestablishment protection is not used. If this parameter is
set to a value other than 0, the eNodeB rejects the RRC connection
reestablishment request due to reconfigurationFailure from a UE when
the number of RRC connection reestablishment requests initiated by the
UE served by the eNodeB due to reconfigurationFailure has exceeded
the parameter value within 1 minute.
Indicates the time for which the X2 interface configuration is retained on
the local and peer eNodeBs when the two eNodeBs do not have a
neighbor relationship with each other. If the local eNodeB determines
that no neighbor relationship is configured between the local and peer NO
eNodeBs, the local eNodeB starts the timer and removes the X2
interface configuration after the timer expires. If this parameter is set to
0, the neighbor relationship-based X2 self-removal function is disabled.

Indicates the eNodeB coding scheme for Global eNodeB ID IE and

Reporting Cell ID IE in the RIM message. If the EPC devices that
exchange RIM messages with eNodeBs are provided by Huawei and the NO
peer devices adopt the private coding scheme, set this parameter to
Private Coding. In other cases, set this parameter to Standard Coding.
Indicates whether the handover request message for a handover from E-
UTRAN to UTRAN or GERAN contains the UE-EUTRA-Capability NO
information element (IE).
Indicates whether MMEs of operators that share the eNodeB can be
configured with the same mobility management entity code (MMEC). If
this parameter is set to OFF(Off), MMEs of operators that share the
NO
eNodeB cannot be configured with the same MMEC. If this parameter is
set to ON(On), MMEs of operators that share the eNodeB can be
configured with the same MMEC.

Indicates whether to enable the X2 automatic removal based on a

request from the peer eNodeB. If this parameter is set to ON(On), this
function is enabled. If this parameter is set to OFF(Off), this function is
disabled. When the parameter is set to ON(On), the local eNodeB NO
removes the X2 interface configuration if the local eNodeB receives a
RESET REQUEST message from the peer eNodeB and determines that
the X2 interface is unavailable.

Indicates whether the SN STATUS TRANSFER message contains the IE

Receive Status Of UL PDCP SDUs during an S1- or X2-based outgoing
handover.
When this parameter is set to OFF(Off), the SN STATUS TRANSFER
message contains the IE Receive Status Of UL PDCP SDUs if the
eNodeB receives out-of-order uplink PDCP packets for bearers in
NO
acknowledge mode.
When this parameter is set to ON(On), the SN STATUS TRANSFER
message contains the IE Receive Status Of UL PDCP SDUs if the
following conditions are met: (1) The source eNodeB receives out-of-
order uplink PDCP packets for bearers in acknowledge mode. (2) The
target eNodeB returns the uplink data forwarding address.
protocol-defined default values are no longer included in the
RRCConnectionSetup message. For details about the protocol-defined
default settings, see 3GPP TS 36.331.
IucsRrcRecfgMcCombSwitch: If this option is selected, the eNodeB
includes the radio resource configuration and measurement
configuration for a UE in one RRCConnectionReconfiguration message
during initial access.
RcrpRrcRecfgMcCombSwitch: If this option is selected, the eNodeB
includes the radio resource configuration and measurement
configuration for a UE in one RRCConnectionReconfiguration message
during RRC connection reestablishment. The option will not take effect
on the interaction of RRC connection reestablishment and other
signaling procedures.
RrcRecfgMcOptSwitch: If this option is selected, the cell measurement
configurations with the CIO of 0 (indicated by cellIndividualOffset) are no
longer included in the measurement configurations delivered to UEs.
IdleCsfbRedirectOptSwitch: If this option is selected and the preferred
CSFB policy for UEs in idle mode is redirection, the eNodeB no longer
activates security mode or performs RRC connection reconfiguration, but NO
sends a redirection message.
UlNasBufferSwitch: If this option is selected, the eNodeB buffers uplink
NAS messages sent by the UE before the UE-associated logical S1
connection is available and sends these messages after the UE-
associated logical S1 connection is available. If this option is deselected,
the eNodeB releases this UE after the procedures finish.
IratMeasCfgTransSwitch: If this option is selected, the Handover
Required message that the eNodeB sends to a BSC contains the IE
IRAT Measurement Configuration.
GeranAnrMcOptSwitch: This option controls whether measurement
configuration optimization takes effect when ANR with GERAN is
enabled. If this option is deselected, the optimization does not take
effect. That is, when an eNodeB delivers measurement configuration to
UEs to perform CGI reading for ANR with GERAN, the carrierFreqs IE
can contain multiple GERAN frequencies. If this option is selected, the
optimization takes effect, and the carrierFreqs IE contains only one
GERAN frequency.
InactDiscardSwitch: This option controls whether to terminate the
Indicates whether to enable the eNodeB to remove external cell and
neighboring cell configurations from neighboring cell lists (NCLs) and
neighboring relation tables (NRTs) based on the ENB CONFIGURATION
UPDATE message. If this parameter is set to ON, this function is
enabled. If this parameter is set to OFF, this function is disabled. If both
the X2BasedUptENodeBCfgSwitch parameter and this parameter are set
NO
to ON, the eNodeB removes external cell and neighboring cell
configurations from NCLs and NRTs if the following conditions are met:
(1) The ENB CONFIGURATION UPDATE message received over the X2
interface contains the IE "Served Cells To Delete" (identified by the IE ID
27); (2) The No Remove attribute for the neighbor relationship is set to
permit removals.

Indicates the type of served cells, which is contained in protocol-defined

messages exchanged in X2 Setup and eNB Configuration Update
procedures. If this parameter is set to ACTIVE_CELL(Active Cell), the
NO
serving cells include all the activated cells. If this parameter is set to
CONFIGURED_CELL(Configured Cell), the serving cells include all the
configured cells.
Indicates whether to enable eNodeB-triggered MME load rebalancing.
When this parameter is set to ON(On), the eNodeB releases the RRC
connection for a UE with the cause value "loadBalancingTAUrequired" if
the UE accesses the cell using an S-TMSI that is associated with an
overloaded MME. This ensures that the UE can be routed to a lightly NO
loaded MME if it initiates another access request. When this parameter
is set to OFF(Off), the eNodeB sends an RRCConnectionRelease
message with the cause value "other" to the UE to release its RRC
connection.

Indicates after which times of resynchronization failures the UE release

timer is started in scenarios where the RRC connection is released for a NO
UE caused by resynchronization failure.
Indicates whether to perform the radio link failure (RLF) detection for a
UE when the RRC connection for the UE is released because of UE NO
inactivity.

Indicates the UE link fault detection switch. If this switch is turned on, link
fault detection is enabled for synchronized UEs. If this switch is turned NO
off, link fault detection is not enabled for synchronized UEs.
Indicates the value of the IE Default paging DRX contained in the S1
SETUP REQUEST and ENB CONFIGURATION UPDATE messages that
NO
the eNodeB sends over the S1 interface. For details, see 3GPP TS
36.413.

Indicates whether the RRCConnectionReconfiguration message sent

from the source eNodeB to a UE contains the power headroom
configuration during a handover where the eNodeB works as the target
eNodeB. If this parameter is set to ON(On), the
NO
RRCConnectionReconfiguration message must contain the power
headroom configuration. If this parameter is set to OFF(Off), the power
headroom configuration is optional in the
RRCConnectionReconfiguration message.
Indicates whether to send E-UTRAN cell load information.
RimUtranSwitch(RimUtranSwitch): This option controls whether to send
E-UTRAN cell load information through RAN information management
(RIM) procedures to the UTRAN. This option applies only to LTE FDD. If
the RimUtranSwitch(RimUtranSwitch) option is selected, the eNodeB
sends cell load information through RIM procedures to the UTRAN and
NO
notifies the UTRAN of cell load changes through RIM procedures.
EcoSwitch(EcoSwitch): This option controls whether to send cell load
information to the eCoordinator. This option applies to both LTE FDD and
LTE TDD. If the EcoSwitch(EcoSwitch) option is selected, the eNodeB
sends load information to the eCoordinator and notifies the eCoordinator
of cell load changes through RIM procedures.

Indicates whether the eNodeB supports some protocol-defined

procedures. SupportS1UeCapMatchMsg(SupportS1UeCapMatchMsg): If
this option is selected, the eNodeB can process and respond to the UE
RADIO CAPABILITY MATCH REQUEST message over the S1 interface.
NO
For details about the message, see 3GPP TS 36.413. If the option is
deselected, the eNodeB cannot process the UE RADIO CAPABILITY
MATCH REQUEST message and responds with an error indication
message.
Indicates whether the eNodeB is allowed to send a CellTrafficTrace
message to the MME over the S1 interface after a cell tracing task is
started. If this parameter is set to ON, the eNodeB can send the
CellTrafficTrace message to the MME after the cell tracing task is NO
started. If this parameter is set to OFF, the eNodeB does not send the
message in this scenario. For details about the mechanism for sending
the CellTrafficTrace message, see 3GPP TS 32.422.

This switch is only valid when a UMPT and an LMPT are in one BBU,
with the UMPT as the main control board and the LMPT as the extended
board.The LMPT can be configured with a maximum of 18 cells. This NO
switch should be off if the eNodeB needs to be configured more than 18
cells.

Indicates the policy based on which the eNodeB selects an MME for a
UE in cell reselection from a GERAN or UTRAN cell to an E-UTRAN cell.
If the MMESELECTALGOSWITCHFORGUUE option is deselected, the
eNodeB preferentially selects the MME having the UE's contexts.
If the MMESELECTALGOSWITCHFORGUUE option is selected, the NO
eNodeB preferentially selects an MME with a light load for the UE. The
setting of this option only takes effect on UEs that report the globally
unique MME identifier (GUMMEI) information within which the highest bit
of the MME group identifier (MMEGI) is 0.

This parameter Indicates whether to enable software commissioning

over the S1 interface. If all S1 links are unavailable in the initial
engineering stage, this parameter enables cells to be activated for cell NO
signal coverage tests. It is recommended that this parameter be used
only in the engineering commissioning stage.
CaGapMeasPriOffSwitch: This option specifies whether the eNodeB
preferentially deletes the inter-frequency measurement configuration
after a UE reports event A4 for configuring an SCell. If this option is
selected, the eNodeB preferentially sends an A4-related measurement
configuration deletion message. If this option is deselected, the eNodeB
sends the SCell configuration message to the UE before sending an A4-
related measurement configuration deletion message to the UE.
CaHoReqWithR9ConfigSwitch: This option specifies whether the
handover request message sent from the source eNodeB during a
handover for a CA UE carries the IEs sourceOtherConfig-r9 and ue-
ConfigRelease-r9.
NasSecProcSwitch: This option controls how the eNodeB fills the IE NAS
Security Parameters to E-UTRAN. If this option is selected, the eNodeB
fills the IE from octet 1. If this option is deselected, the eNodeB fills the
IE from octet 2.
AntennaFullConfigSwitch: This option controls whether the full
configuration function takes effect. When a 3GPP Release 10 UE is
handed over from a third-party eNodeB to a Huawei eNodeB and the
handover request message contains the IE antennaInfo-r10, the setting NO
of this option affects the IEs contained in the handover command
message. If this option is selected, the handover command message
contains IEs antennaInfo-r8 and fullconfig-r9. If this option is deselected,
the handover command message contains the IE antennaInfo-r10.
DrxConfigMsgSwitch: This option controls whether the eNodeB includes
the DRX-Config IE in the RRC Connection Setup message. The
messages contain this IE only if this option is selected.
HARQ-Multiplexing-Table: This option specifies the type of the HARQ
multiplexing table used by a UE. If this option is selected, the UE sends
HARQ feedback in multiplexing mode according to HARQ-ACK
Multiplexing Tables 10.1.3-2, 10.1.3-3, and 10.1.3-4 in 3GPP TS 36.213.
This option applies only to LTE TDD.
SCellModCaMeasRmvSwitch: This option controls whether to delete the
A2 and A6 measurement configuration for SCC of the UE before
changing the SCell of the UE. If this option is selected, upon receiving an
A6 measurement report from a UE, the eNodeB sends an A2- and A6-
related measurement configuration deletion message to the UE before
changing the SCell of the UE. If this option is deselected, upon receiving
Indicates the triggering type for establishing an SCTP link for an X2
interface. If this parameter is set to BASED_TNL, the establishment can
be triggered based on transport resources. When the CP bearer is
subscribed, the eNodeB initiates the establishment of an SCTP link with
NO
the peer eNodeB. If this parameter is set to BASED_X2INTERFACE, the
SCTP establishment can be triggered based on the X2 interface. When
the conditions for setting up an X2 interface are met, the eNodeB
initiates the establishment of an SCTP link with the peer eNodeB.
Indicates whether to enable X2 automatic removal based on X2 fault and
X2 usage. This parameter includes the following options:
BASED_ON_X2FAULT(Based on X2 Fault): If this option is selected, X2
automatic removal based on X2 fault is enabled.
BASED_ON_X2USAGE_WITH_NEGO(Based on X2 Usage with
Negotiation): If this option is selected, X2 automatic removal based on
X2 usage is enabled and the removal requires the negotiation between
the local and peer eNodeBs. This option applies to scenarios where the NO
X2 interface is normal and the peer eNodeB is a Huawei eNodeB.
BASED_ON_X2USAGE_WITHOUT_NEGO(Based on X2 Usage Without
Negotiation): If this option is selected, X2 automatic removal based on
X2 usage is enabled and the removal does not require the negotiation
between the local and peer eNodeBs. This option applies to scenarios
where the X2 interface is normal and the peer eNodeB is not a Huawei
eNodeB.
Indicates the length of the timer for automatically removing X2 interfaces
based on X2 fault. If an X2 interface is faulty throughout the time
NO
specified by this timer, the eNodeB automatically removes the X2
interface.
Indicates the length of the timer for automatically removing X2 interfaces
based on X2 usage. If the number of handovers from a peer eNodeB to
a local eNodeB within the time specified by this timer is less than or
equal to the X2SonDeleteHoInNumThd parameter value and the number
NO
of handovers from the local eNodeB to the peer eNodeB within the time
specified by this timer is also less than or equal to the
X2SonDeleteHoOutNumThd parameter value, the local eNodeB
automatically removes the X2 interface between the eNodeBs.
Indicates the threshold of the number of incoming handovers for
automatically removing X2 interfaces based on X2 usage. If the number
of handovers from a peer eNodeB to a local eNodeB within the time
specified by the X2SonDeleteTimerforX2Usage parameter is less than
this parameter value and the number of handovers from the local NO
eNodeB to the peer eNodeB within the time specified by the
X2SonDeleteTimerforX2Usage parameter is also less than the
X2SonDeleteHoOutNumThd parameter value, the local eNodeB
automatically removes the X2 interface between the eNodeBs.
Indicates the threshold of the number of outgoing handovers for
automatically removing X2 interfaces based on X2 usage. If the number
of handovers from a local eNodeB to a peer eNodeB within the time
specified by the X2SonDeleteTimerforX2Usage parameter is less than
this parameter value and the number of handovers from the peer NO
eNodeB to the local eNodeB within the time specified by the
X2SonDeleteTimerforX2Usage parameter is also less than the
X2SonDeleteHoInNumThd parameter value, the local eNodeB
automatically removes the X2 interface between the eNodeBs.
Indicates whether VoIP UEs are allowed to enter the periodical
measurement gap and whether they can exit the gap if VoIP services are
initiated during the gap. A VoIP UE can enter the periodical
measurement gap during GSM and LTE buffer zone optimization or
periodic inter-frequency/RAT measurements in cell tracing. If a UE enters
the measurement gap and then VoIP services are initiated for this UE,
fast ANR, active PCI conflict detection, GSM and LTE buffer zone
optimization, or periodic inter-frequency/RAT measurements in cell
tracing can trigger the UE's exiting from the gap. NO
If this parameter is set to ENBALE, VoIP UEs are allowed to enter the
periodic measurement gap during GSM and LTE buffer zone optimization
and periodic inter-frequency/RAT measurement in cell tracing. The
parameter setting does not affect the entering of the gap during fast ANR
and active PCI conflict detection for VoIP UEs.
If this parameter is set to DISABLE, VoIP UEs are prohibited to enter the
periodic measurement gap and the UEs entering the gap and initiating
VoIP services cannot exit the gap.

Indicates whether to optimized the statistics method of counters related

to the number of active UEs in intra-eNodeB handover scenarios. If this
switch is on, the number of active UEs in the source cell are not counted
NO
after the handover data transfer completes. If this switch is off, the
eNodeB measures the number of active UEs after the handover data
transfer completes.
Indicates the maximum number of synchronized UEs supported by a
baseband processing unit (BBP). This parameter currently applies only
to LBBPd boards in LTE FDD macro eNodeBs. If the
PucchPeriodicCqiOptSwitch parameter is set to OFF or at least one cell NO
established in the LBBPd is configured with extended cyclic prefix (CP),
the parameter value MAX_SYNC_USER_1200 takes effect irrespective
of the actual parameter setting.

Indicates the time to wait for sending an X2 setup request again when an
X2 setup fails. When an X2 setup procedure fails, the eNodeB that
accepted the X2 setup request sends an X2 Setup Failure message to
the peer eNodeB. This message contains the TimetoWait IE to inform the
peer eNodeB the time to wait for sending an X2 setup request again. As
defined in 3GPP TS 36.423, the peer eNodeB shall wait at least for the
time indicated by the TimetoWait IE before reinitiating the X2 Setup
procedure towards the same eNodeB.
If this parameter is set to TIMETOWAIT_NOTCARRY, the X2 Setup
NO
Failure message does not contain the TimetoWait IE. The values
TIMETOWAIT_1s, TIMETOWAIT_2s, TIMETOWAIT_5s,
TIMETOWAIT_10s, TIMETOWAIT_20s, and TIMETOWAIT_60s indicate
that the waiting time are 1s, 2s, 5s, 10s, 20s, and 60s, respectively.
Assume that the number of X2 setup failures is N. If this parameter is set
to TIMETOWAIT_Default, the TimetoWait IE takes effect as follows: 1. If
N < 10, the waiting time is 5s. 2. If 10 ≤ N < 20, the waiting time is 10s.
3. If 20 ≤ N < 60, the waiting time is 20s. 4. If N ≥ 60, the waiting time
is 60s.
Indicates the threshold of the number of X2 setup failures. If the number
of X2 setup failures reaches this threshold within a period specified by
the X2SetupFailureNumTimer, the eNodeB that initiates the X2 setup no
NO
longer sends any X2 setup request within the period. If this parameter is
set to 0, the number of X2 setup failures is not measured and the X2
setup request is not prohibited.
Indicates the length of a period for measuring the number of X2 setup
failures. If the number of X2 setup failures reaches the value of the
X2SetupFailureNumThd parameter within a measurement period, the NO
eNodeB that initiates the X2 setup no longer sends any X2 setup request
within the period.
Indicates whether to enable eX2 automatic removal.
If the BASED_ON_EX2FAULT(Based on EX2 Fault) option is selected,
NO
eX2 automatic removal based on eX2 fault is enabled. If the option is
deselected, the function is disabled.
Indicates the length of the timer for automatically removing eX2
interfaces based on eX2 fault. If an eX2 interface is faulty throughout the
NO
time specified by this timer, the eNodeB automatically removes the eX2
interface.

Indicates the X2 automatic removal mode. If this parameter is set to

ALL_FREE_MODE(All free mode), all enabled X2 automatic removal
functions work in free mode. In this mode, the eNodeB directly removes
the X2 interfaces that are determined to be removed. If this parameter is
set to HUAWEI_FREE_OTHER_CONTROLLED(HW free other
controlled), some functions work in controlled mode. These functions
NO
refer to those controlled by the PeerReqBasedX2DelSwitch parameter,
and BASED_ON_X2FAULT(Based on X2 Fault) and
BASED_ON_X2USAGE_WITHOUT_NEGO(Based on X2 Usage Without
Negotiation) of the X2SonDeleteSwitch parameter. In this mode, the X2
interfaces that need to be removed are reported to the U2000, and then
the operators determine whether to remove the X2 interfaces.
Indicates the threshold for triggering X2 self-setup. If the number of times
an X2 interface needs to be set up between the local eNodeB and a peer
eNodeB is greater than or equal to this threshold within the period NO
specified by the X2SonSetupTimer parameter, the X2 interface self-setup
is triggered on the local eNodeB.
Indicates the length of the timer for the local eNodeB measuring the
number of times an X2 interface needs to be automatically set up. If the
number of times an X2 interface needs to be set up between the local
eNodeB and a peer eNodeB is greater than or equal to the threshold NO
specified by the X2SonSetupNumThd parameter within a period
specified by the X2SonSetupTimer parameter, the X2 interface self-setup
is triggered on the local eNodeB.

Indicates whether an eNodeB proactively reconfigures the access

stratum (AS) security key after an X2-based handover. If this parameter
is set to OFF(Off), the target eNodeB uses the AS security key received
from the source eNodeB after the X2-based handover. If this parameter
NO
is set to ON(On), the target eNodeB calculates an AS security key based
on the key received from the MME after the X2-based handover and
delivers the RRCConnectionReconfiguration message to the UE to
reconfigure the AS security key.
Indicates whether the eNodeB automatically updates the neighboring cell
configuration data based on the messages received over the X2
interface. The messages include X2 SETUP REQUEST, X2 SETUP
RESPONSE, and ENB CONFIGURATION UPDATE. The related switch
is described as follows:
Update eNB Configuration Via X2 Policy: Indicates whether the eNodeB NO
adds neighboring E-UTRAN frequencies based on messages received
over the X2 interface. If this switch is on, the eNodeB directly adds
frequencies. If this switch is off, the eNodeB does not add any
frequencies if the PLMN in the telecom operator information and the
PLMN of the serving cell do not match.

Indicates the threshold for an RRC connection penalty. Certain UEs may
repeatedly fail to access networks because of compatibility issues. If the
number of RRC connection setup requests that the eNodeB receives
from a UE within the time specified by
NO
T300+FilterReptRrcConnReqTimer exceeds the threshold (a non-zero
value), the eNodeB imposes a penalty on the UE, rejecting RRC
connection setup requests from the UE. If this parameter is set to 0, the
penalty does not take effect.
Indicates whether to perform parameter check when the QCI value is
updated. If this parameter is set to ON, the eNodeB does support the
function of checking RLC or PDCP parameters before and after the
dynamic update of the QCI value. This may cause a decrease in the E-
RAB modification success rate, but prevents packet size from being NO
changed because of parameter setting changes. If this parameter is set
to OFF, the E-RAB modification success rate does not decrease.
However, there is a possibility of packet size change because the
settings of RLC and PDCP parameters are changed.
Indicates whether to enable compatibility optimization functions for UEs
to control the differentiated handling of abnormal UEs.
AbnormalUeHandleSwitch: This option is used to control whether to
enable handling of abnormal UEs.This function is enabled only if this
option is selected.
UltraFlashCsfbComOptSw: This option is used to control whether to NO
enable the optimization of UE incompatibility risks in ultra-flash CSFB. If
this option is selected, an eNodeB triggers an ultra-flash CSFB based on
the private IE SRVCC based eCSFB operation possible that the MME
sends to the eNodeB. If this option is not selected, the eNodeB does not
trigger an ultra-flash CSFB procedure based on this IE.

Indicates the switch to control the Huawei-proprietary functions related to

the S1 interface.UeTypeRecogSwitch: This option controls whether to
allow the eNodeB to obtain the IMEISV information of UEs from the
MME. For details of the definition of IMEISV, see section 6.2.2 in 3GPP NO
TS 23.003 V12.3.0. As defined in section 9.2.3.38 in 3GPP TS 36.413
V12.2.0, the last 4 digits of the SNR in the IMEISV are masked by setting
the corresponding bits to F.
Indicates whether to enable SCTP link abortion smooth. This parameter
includes the following options:
HUAWEI_S1_SCTP_ABORT_SMOOTH_SW: For an S1 interface that
connects an eNodeB and a Huawei MME, if this option is selected, the
eNodeB starts a smooth timer when the eNodeB receives an ABORT
message from the MME. Before the timer expires, the S1 interface status
does not change. After the timer expires, the S1 interface status does
not change if the SCTP link is normal and changes to faulty if the SCTP
link is faulty. In the preceding scenario, if this option is deselected, the
S1 interface status immediately changes after the eNodeB receives an
NO
ABORT message from the MME.
OTHER_S1_SCTP_ABORT_SMOOTH_SW: For an S1 interface that
connects an eNodeB and a non-Huawei MME, if this option is selected,
the eNodeB starts a smooth timer when the eNodeB receives an ABORT
message from the MME. Before the timer expires, the S1 interface status
does not change. After the timer expires, the S1 interface status does
not change if the SCTP link is normal and changes to faulty if the SCTP
link is faulty. In the preceding scenario, if this option is deselected, the
S1 interface status immediately changes after the eNodeB receives an
ABORT message from the MME.

Indicates the index of the operator. YES

Indicates the proportion of the number of UEs in RRC_CONNECTED

mode of the operator when the eNodeB is shared among operators. This NO
parameter must be set based on the contract signed with operators.

Indicates the proportion of users that the operator can share with other
operators when the eNodeB is shared among operators. This parameter
NO
must be set based on the contract signed with operators. This parameter
applies only to LTE FDD.

Indicates the ID of a Multimedia Broadcast Single Frequency Network

NO
(MBSFN) area to which a cell belongs.
Indicates the synchronization period of the SYNC protocol. NO

Indicates whether the cell is a reserved cell for Multimedia Broadcast

NO
Multicast Service (MBMS) services.

This parameter indicates the local ID of the cell. It uniquely identifies a

NO
cell within an eNodeB.

Indicates the switches to control eNodeB-level MBMS services. This

parameter includes the following option:
NO
SessionForMultiMASwitch: A single MBMS session can be broadcasted
in multiple MBSFN areas in an eNodeB only if this option is selected.

Indicates the ID of a mobility load balancing (MLB) parameter group for a

YES
QCI. This parameter is valid only for LTE TDD cells.

Indicates the uplink minimum guaranteed bit rate. This parameter is valid
NO
only for LTE TDD cells.
Indicates the downlink minimum guaranteed bit rate. This parameter is
NO
valid only for LTE TDD cells.

Indicates the minimum length of the S1 re-establishment timer. NO

Indicates the maximum length of the S1 re-establishment timer. NO

Indicates the ID of the operator. YES

Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates the number of a specific call history record (CHR) hierarchical

YES
classification output mode.

Indicates the call history record (CHR) generating cause value

NO
corresponding to a specific CHR hierarchical classification mode.
Indicates the call history record (CHR) hierarchical output mode. If the
parameter is set to Level_1_Output, level-1 CHRs, that is, only typical
records, are outputted. If the parameter is set to Level_2_Output, level-2
NO
CHRs, that is, all records, are outputted. If level-2 CHRs are started to
be outputted, the number of outputted records increases, thereby
decreasing the duration that the local logs can be recorded.

Indicates whether CHRs are outputted after being sampled. If this

parameter is set to SamplingEnable, specific CHRs are outputted after
being sampled. If this parameter is set to SamplingUnable, the specific
CHRs are all outputted without being sampled. If the value of this NO
parameter is changed from SamplingEnable to SamplingUnable, the
amount of records increases, thereby decreasing the duration that the
local logs can be recorded.

Indicates the ID of the ECO MO. YES

Indicates whether to configure the control-plane end point group, user-

NO
plane end point group, or both end point groups for the ECO MO.

Indicates the ID of the control-plane end point group used by the ECO
NO
MO.

Indicates the ID of the user-plane end point group used by the ECO MO. NO

Indicates the descriptions of the ECO MO. NO

Indicates the ID of the control port (CP) bearer for the ECO interface. NO

Indicates the status of the control port (CP) bearer for the ECO interface. NO

Indicates the ID of the IP path. YES

Indicates the application type of the IP path. NO

Indicates the S1 interface ID of the IP path. This parameter is unavilable

NO
in this version, it is recommended to be set as 0.

Indicates the X2 interface ID of the IP path. NO

Indicates the M1 object ID. YES

Indicates the ID of the end point group used by the M1 MO. NO

Indicates the user-defined information. NO

Indicates the M2 object ID. YES

Indicates the ID of the end point group used by the M2 MO. NO

Indicates the user-defined information. NO

Indicates the control port (CP) bearer ID of the M2 interface. NO

Indicates the control port bearer status of the M2 interface. NO

Indicates the M2 interface status. NO

Indicates the number of sessions on the M2 interface. NO

Indicates the name of the Multi-cell/multicast Coordination Entity (MCE)

NO
to which the eNodeB is connected over the M2 interface.

Indicates the global unique ID of the Multi-cell/multicast Coordination

Entity (MCE) connected to the eNodeB through the M2 interface. The
global unique ID of the MCE is represented as "MCC-MNC-MCE ID". NO
MCC is short for mobile country code and MNC is short for mobile
network code.

Indicates the fault reason of the M2 link. NO

Indicates the temporary mobile group identities (TMGIs) of all incoming

NO
sessions over the M2 interface.

Indicates the S1 object ID. YES

Indicates the ID of the operator that owns the S1 object. NO

Indicates the ID of the control-plane end point group used by the S1

NO
object.

Indicates the ID of the user-plane end point group used by the S1 object. NO

Indicates the compliance protocol release of the MMEs to which the

NO
eNodeB is connected through the S1 interfaces under this S1 object.

Indicates the description of the S1 object. NO

Indicates whether to configure the control-plane or user-plane end point

NO
group.
Indicates the priority of an MME to which the eNodeB is connected
through the S1 interface. A large parameter value indicates a high
NO
priority. After this parameter is set for MMEs, the eNodeB can select a
high-priority MME for UEs attempting to access the network.

Indicates the ID of a carrier-sharing operator group that shares the S1

MO. If the eNodeB works in hybrid RAN sharing mode, set this
parameter to a value within the range from 0 to 5. If the eNodeB works in
NO
independent mode, RAN sharing with common carriers mode, or RAN
sharing with dedicated carriers mode, retain the default value 255, which
is an invalid value.

Indicates the S1 interface ID. NO

Indicates the status of the S1 interface. NO

Indicates whether the S1 interface is blocked. An S1 interface is blocked

after the execution of BLK S1INTERFACE and is unblocked after the NO
execution of UBL S1INTERFACE.

Indicates the ID of the control port bearer for the S1 interface. NO

Indicates the status of the control port (CP) bearer for the S1 interface. NO
Indicates the ID of the S1 interface. YES

Indicates the ID of the control port bearer for the S1 interface. NO

Indicates the ID of the operator that owns the S1 interface. NO

Indicates the compliance protocol release of the MME to which the

eNodeB is connected through the S1 interface. The eNodeB sends S1
messages complying with the protocol release specified by this
parameter. The value of this parameter must be the same as the MME- NO
complied protocol release. If the parameter value is different from the
MME-complied protocol release, the way in which the MME handles
these message is subject to the MME implementation.

Indicates whether the S1 interface is blocked. An S1 interface is blocked

after the execution of BLK S1INTERFACE and is unblocked after the NO
execution of UBL S1INTERFACE.

Indicates the control mode of the S1 interface, which determines the

control policies of users and the SON function on the S1 interface. When
it is set to MANUAL_MODE, only users can control the S1 interface.
When it is set to AUTO_MODE, both users and the SON function can
control the S1 interface. The control policies set in this parameter also NO
apply to the MmeFeatureCfg MO. When the SON function automatically
sets up an S1 interface, this parameter is set to AUTO_MODE by
default. When users add or modify an S1 interface, users can set this
parameter to AUTO_MODE or MANUAL_MODE.
Indicates whether the S1 interface is created automatically or manually.
This parameter is set by the system. Users cannot modify the parameter
setting. The system sets this parameter to AUTO_CREATE when the S1
NO
interface is created automatically using the SON function and to
MANUAL_CREATE when the S1 interface is created manually by using
the CME or running an MML command.

Indicates the priority of an MME to which the eNodeB is connected

through the S1 interface. A large parameter value indicates a high
NO
priority. After this parameter is set for MMEs, the eNodeB can select a
high-priority MME for UEs attempting to access the network.

Indicates the ID of a carrier-sharing operator group that shares the

S1Interface MO. If the eNodeB works in hybrid RAN sharing mode, set
this parameter to a value within the range from 0 to 5. If the eNodeB
NO
works in independent mode, RAN sharing with common carriers mode,
or RAN sharing with dedicated carriers mode, retain the default value
255, which is an invalid value.

Indicates the status of the S1 interface. NO

Indicates the status of the control port bearer for the S1 interface. NO

Indicates whether the MME connected to the eNodeB over the S1

interface is overloaded. This parameter is valid after the S1 interface is
established. Before the S1 interface is established, the MME load status NO
is NULL. For details about the MME load status after the S1 interface is
established, see 3GPP TS 36.413.

Indicates the number of users that have accessed the S1 interface. NO

Indicates the name of the MME to which the eNodeB is connected
through the S1 interface. This parameter is valid after the S1 interface is
established and the MME name is contained in the S1 interface
NO
establishing response message or the MME configuration update
message. In other conditions, the parameter value is NULL. For details,
see 3GPP TS 36.413.

Indicates the IDs of all served PLMNs of the MME to which the eNodeB
is connected. The ID of a served PLMN consists of the MCC and MNC. NO
PLMN IDs are separated by commas (,).

Indicates the Global Unique MME Identifiers (GUMMEIs) of all MME to

which the eNodeB is connected. A GUMMEI of a serving MME consists
NO
of the MCC, MNC, MME group ID, and MME code. GUMMEIs are
separated by commas (,).

Indicates the capacity of the connected MME relative to that of other

MMEs. A larger value of this parameter indicates a larger capacity NO
allowing UE access.

Indicates the reason of the fault on the S1 link. NO

Indicates the ID of the SO MO. YES

Indicates whether to configure the control-plane end point group, user-

NO
plane end point group, or both end point groups for the SO MO.
Indicates the ID of the control-plane end point group used by the SO
NO
MO.

Indicates the ID of the user-plane end point group used by the SO MO. NO

Indicates the description of the SO MO. NO

Indicates the ID of the control port (CP) bearer for the SO interface. NO

Indicates the status of the CP bearer for the SO interface. NO

Indicates the interface protocol type of the debugging message. Do not

change the setting of this parameter without the guidance from Huawei YES
Customer Service Center.

Indicates the number of the message transmitted over 3GPP-specific

interfaces. Do not change the setting of this parameter without the YES
guidance from Huawei Customer Service Center.

Indicates the operation performed by the eNodeB on a matched

message. Do not change the setting of this parameter without the NO
guidance from Huawei Customer Service Center.

Indicates the number of matching items for a debugging message. Each

matching item contains the matching offset, matching length, and
matching content. The value ZERO indicates that the eNodeB discards
or modifies the messages with a specific ID. The value ONE indicates
that the eNodeB discards or modifies the messages with the matching
result of one matching item to be positive. The value TWO indicates that NO
the eNodeB discards or modifies the messages with the matching result
of two matching items to be positive. The value THREE indicates that the
eNodeB discards or modifies the messages with the result of three
matching items to be positive. Do not change the setting of this
parameter without the guidance from Huawei Customer Service Center.

Indicates the matching offset used when the eNodeB compares a

debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching length used when the eNodeB compares a
debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching content used when the eNodeB compares a
debugging message with a message received or to be sent by the
eNodeB. The matching content consists of 0 to 100 hexadecimal digits. NO
Do not change the setting of this parameter without the guidance from
Huawei Customer Service Center.
Indicates the matching offset used when the eNodeB compares a
debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching length used when the eNodeB compares a
debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching content used when the eNodeB compares a
debugging message with a message received or to be sent by the
eNodeB. The matching content consists of 0 to 100 hexadecimal digits. NO
Do not change the setting of this parameter without the guidance from
Huawei Customer Service Center.
Indicates the matching offset used when the eNodeB compares a
debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching length used when the eNodeB compares a
debugging message with a message received or to be sent by the
NO
eNodeB. Do not change the setting of this parameter without the
guidance from Huawei Customer Service Center.
Indicates the matching content used when the eNodeB compares a
debugging message with a message received or to be sent by the
eNodeB. The matching content consists of 0 to 100 hexadecimal digits. NO
Do not change the setting of this parameter without the guidance from
Huawei Customer Service Center.

Indicates the number of modification items for a debugging message.

Each modification item contains the modification offset, modification
length, and modification content. The value ZERO indicates that the
eNodeB does not modify the messages with positive matching result.
The value ONE indicates that the eNodeB makes one modification to the
messages with positive matching result. The value TWO indicates that NO
the eNodeB makes two modifications to the messages with positive
matching result. The value THREE indicates that the eNodeB makes
three modifications to the messages with positive matching result. Do not
change the setting of this parameter without the guidance from Huawei
Customer Service Center.

Indicates the modification offset used when the eNodeB modifies a

message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.
Indicates the modification length used when the eNodeB modifies a
message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.
Indicates the modification content used when the eNodeB modifies a
message received or to be sent by the eNodeB. The modification content
NO
consists of 0 to 100 hexadecimal digits. Do not change the setting of this
parameter without the guidance from Huawei Customer Service Center.

Indicates the modification offset used when the eNodeB modifies a

message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.
Indicates the modification length used when the eNodeB modifies a
message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.

Indicates the modification content used when the eNodeB modifies a

message received or to be sent by the eNodeB. The modification content
NO
consists of 0 to 100 hexadecimal digits. Do not change the setting of this
parameter without the guidance from Huawei Customer Service Center.

Indicates the modification offset used when the eNodeB modifies a

message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.
Indicates the modification length used when the eNodeB modifies a
message received or to be sent by the eNodeB. Do not change the
NO
setting of this parameter without the guidance from Huawei Customer
Service Center.

Indicates the modification content used when the eNodeB modifies a

message received or to be sent by the eNodeB. The modification content
NO
consists of 0 to 100 hexadecimal digits. Do not change the setting of this
parameter without the guidance from Huawei Customer Service Center.

Indicates the ID of an eNodeB FDD baseband resource. The ID uniquely

identifies an eNodeB FDD baseband resource within an eNodeB. If the
LTE_FDD(LTE FDD) option of the Base Band Work Standard parameter
YES
in a BBP MO is selected, the eNodeB automatically adds an
eNodeBFddBbRes MO for this baseband processing unit (BBP) and
allocates a unique eNodeB FDD baseband resource ID for the BBP MO.
Indicates the number of the cabinet housing the baseband processing
unit that provides the baseband resource.When the eNodeBFddBbRes
MO is automatically added, the eNodeB automatically assigns a value to NO
this parameter based on the setting of the Cabinet No. parameter in the
BBP MO.
Indicates the number of the subrack housing the baseband processing
unit that provides the baseband resource.When the eNodeBFddBbRes
MO is automatically added, the eNodeB automatically assigns a value to NO
this parameter based on the setting of the Subrack No. parameter in the
BBP MO.
Indicates the number of the slot housing the baseband processing unit
that provides the baseband resource. When the eNodeBFddBbRes MO
is automatically added, the eNodeB automatically assigns a value to this NO
parameter based on the setting of the Slot No. parameter in the BBP
MO.
Indicates the capacity of the baseband resource used for LTE FDD
services. When the eNodeBFddBbRes MO is automatically added, the
NO
eNodeB automatically assigns a value to this parameter based on the
setting of the Base Band Work Standard parameter in the BBP MO.

Indicates the administrative state of the baseband resource. BLOCKED

means that the baseband resource cannot be used to provide LTE FDD
NO
services. UNBLOCKED means that the baseband resource can be used
to provide LTE FDD services.
Indicates the operational state of the baseband resource. ENABLED
means that the baseband resource is available. DISABLED means that
the baseband resource is unavailable. If the setting of the Base Band
NO
Work Standard parameter for the corresponding baseband processing
unit (BBP) and the BBP capability are mismatched, the setting of this
parameter does not take effect.

Indicates the ID of an eNodeB TDD baseband resource. The ID uniquely

identifies an eNodeB TDD baseband resource within an eNodeB. If the
LTE_TDD(LTE TDD) option of the Base Band Work Standard parameter
YES
in a BBP MO is selected, the eNodeB automatically adds an
eNodeBTddBbRes MO for this baseband processing unit (BBP) and
allocates a unique eNodeB TDD baseband resource ID for the BBP MO.
Indicates the number of the cabinet housing the baseband processing
unit that provides the baseband resource. When the eNodeBTddBbRes
MO is automatically added, the eNodeB automatically assigns a value to NO
this parameter based on the setting of the Cabinet No. parameter in the
BBP MO.
Indicates the number of the subrack housing the baseband processing
unit that provides the baseband resource. When the eNodeBTddBbRes
MO is automatically added, the eNodeB automatically assigns a value to NO
this parameter based on the setting of the Subrack No. parameter in the
BBP MO.
Indicates the number of the slot housing the baseband processing unit
that provides the baseband resource. When the eNodeBTddBbRes MO
is automatically added, the eNodeB automatically assigns a value to this NO
parameter based on the setting of the Slot No. parameter in the BBP
MO.

Indicates the capacity of the baseband resource used for LTE TDD
services. When the eNodeBTddBbRes MO is automatically added, the
NO
eNodeB automatically assigns a value to this parameter based on the
setting of the Base Band Work Standard parameter in the BBP MO.

Indicates the administrative state of the baseband resource object.

BLOCKED means that the baseband resource cannot be used to
NO
provide LTE TDD services. UNBLOCKED means that the baseband
resource can be used to provide LTE TDD services.
Indicates the operational state of the baseband resource. ENABLED
means that the baseband resource is available. DISABLED means that
the baseband resource is unavailable. If the setting of the Base Band
NO
Work Standard parameter for the corresponding baseband processing
unit (BBP) and the BBP capability are mismatched, the setting of this
parameter does not take effect.

Indicates the eX2 object ID. YES

Indicates whether to configure the control-plane or user-plane end point

NO
group for the eX2 object.

Indicates the ID of the control-plane end point group used by the eX2
NO
object.

Indicates the ID of the user-plane end point group used by the eX2
NO
object.

Indicates the transport type of the eX2 interface. SRIO- or 10-GE-based

transport system connecting through the USU is called ideal backhaul.
NO
IPRAN- or PTN-based transport system shared with the S1 or X2
interface is called non-ideal backhaul.

Indicates the description of the eX2 object. NO

Indicates the eX2 interface ID. NO

Indicates the status of the eX2 interface. NO

Indicates the control port (CP) bearer ID of the eX2 interface. NO

Indicates the status of the CP bearer for the eX2 interface. NO

Indicates the ID of an S1 interface. YES

Indicates whether the MME at the other end of the S1 interface supports
Huawei-proprietary positioning procedures, which are included in
minimization of drive tests (MDT). The value DISABLE(disable) indicates
NO
that the MME does not support the procedures and therefore the
eNodeB cannot obtain UE location information from the MME through
the procedures. The value ENABLE(enable) indicates the opposite.

Indicates the X2 object ID. YES

Indicates the ID of the operator to which the X2 MO belongs. NO

Indicates the ID of the control-plane end point group used by the X2

NO
object.

Indicates the ID of the user-plane end point group used by the X2 object. NO

Indicates the compliance protocol release of the neighboring eNodeBs to

which the local eNodeB are connected through the X2 interfaces NO
managed by the X2 MO.

Indicates the description of the X2 object. NO

Indicates whether to configure the control-plane or user-plane end point
NO
group.

Indicates the ID of a carrier-sharing operator group that shares the X2

MO. If the eNodeB works in hybrid RAN sharing mode, set this
parameter to a value within the range from 0 to 5. If the eNodeB works in
NO
independent mode, RAN sharing with common carriers mode, or RAN
sharing with dedicated carriers mode, retain the default value 255, which
is an invalid value.

Indicates the status of the CP bearer for the X2 interface. NO

Indicates the X2 interface ID. NO

Indicates the status of the X2 interface. NO

Indicates the ID of the CP bearer for the X2 interface. NO

Indicates the mobile country code of the neighboring eNodeB to be

added to the list. The value of this parameter is a string of three YES
characters, each of which must be a digit in the range of 0 to 9.
Indicates the mobile network code of the neighboring eNodeB to be
added to the list. The value of this parameter is a string of two or three YES
characters, each of which must be a digit in the range of 0 to 9.

Indicates the ID of the neighboring eNodeB to be added to the list. YES

Indicates whether the X2 list is a blacklist or whitelist. If a neighboring

eNodeB is added to the X2 blacklist, an X2 interface between the local
eNodeB and this neighboring eNodeB cannot be automatically set up or
the X2 interface set up between the local eNodeB and this neighboring NO
eNodeB is abnormal. If a neighboring eNodeB is added to the X2
whitelist or blacklist, the X2 interface between the local eNodeB and this
neighboring eNodeB cannot be automatically removed.

Indicates the X2 interface ID. YES

Indicates the ID of the control port bearer for the X2 interface. NO

Indicates the ID of the operator that owns the X2 interface. NO

Indicates the protocol release with which the peer eNodeB complies. NO

Indicates the control mode of the X2 interface, which determines the

control policies of users and the SON function on the X2 interface. When
it is set to MANUAL_MODE, only users can control the X2 interface.
When it is set to AUTO_MODE, both users and the SON function can
NO
control the X2 interface. When the SON function automatically sets up
an X2 interface, this parameter is set to AUTO_MODE by default. When
users add or modify an X2 interface, users can set this parameter to
AUTO_MODE or MANUAL_MODE.
Indicates whether the X2 interface is created automatically or manually.
This parameter is set by the system. Users cannot modify the parameter
setting. The system sets this parameter to AUTO_CREATE when the X2
NO
interface is created automatically using the SON function and to
MANUAL_CREATE when the X2 interface is created manually by using
the CME or running an MML command.

Indicates the ID of a carrier-sharing operator group that shares the X2

Interface MO. If the eNodeB works in hybrid RAN sharing mode, set this
parameter to a value within the range from 0 to 5. If the eNodeB works in
NO
independent mode, RAN sharing with common carriers mode, or RAN
sharing with dedicated carriers mode, retain the default value 255, which
is an invalid value.

Indicates the ID of the neighboring eNodeB to which the local eNodeB is

connected through the X2 interface. The combination of this parameter
NO
and NbrEnbPlmnId uniquely identifies the neighboring eNodeB around
the globe.

Indicates the PLMN ID of the neighboring eNodeB to which the local

NO
eNodeB is connected through the X2 interface.

Indicates the status of the X2 interface. If the status is normal, the X2

interface has been successfully established. If the status is abnormal, NO
the X2 interface establishment fails.

Indicates the reason why the X2 interface is abnormal. NO

Indicates the DRX switch. The setting of this parameter has no effect on
dynamic DRX. DRX applies to a CA UE only when this parameter is set
NO
to ON(On) on both eNodeBs to which the PCell and SCell of the CA UE
belong.

Indicates whether to enable or disable short DRX cycles. Short DRX

NO
cycles reduce the traffic delay.
Indicates the length of a long DRX cycle that is applied only to non-
power-saving UEs whose subscriber profile ID for RAT/frequency priority
(RFSP) indexes are contained in the RFSP index set or to UEs whose
capability information indicates that they do not support power saving.
Because of the impact of the SRS bandwidth and TA period specified by
the TimeAlignmentTimer parameter, the actual value of this parameter
assigned to a UE may be less than the configured value. In addition, the
configured value will be rounded down to an integral multiple of 10.
Therefore, you are advised to configure this parameter to a value that is
an integral multiple of 10. If users hope that the value actually assigned
NO
to a UE is equal to or greater than 80 ms, set the TimeAlignmentTimer
parameter to a value equal to or greater than 10240 ms. If the
TimingAdvCmdOptSwitch parameter is set to ON, it is recommended
that the LongDrxCycleSpecial parameter be set to a value smaller than
or equal to 320 ms. Otherwise, the uplink time alignment performance of
UEs is affected. If the TimingAdvCmdOptSwitch parameter is set to ON,
it is recommended that the TimeAlignmentTimer parameter be set to
sf10240. A smaller value of the TimeAlignmentTimer parameter, such as
sf5120, increases the probability that UEs in DRX mode become uplink
asynchronized.
Indicates the length of the On Duration Timer that applies only to non-
power-saving UEs whose RFSP indexes are contained in the RFSP
index set or to UEs whose capability information indicates that they do
not support power saving. For details about this timer, see 3GPP TS NO
36.321. Because of the impact of CQI reporting intervals and SRS
transmission intervals, the actual value of this parameter assigned to a
UE may be greater than the configured value.
Indicates the length of the DRX Inactivity Timer that applies only to non-
power-saving UEs whose RFSP indexes are contained in the RFSP
index set or to UEs whose capability information indicates that they do NO
not support power saving. For details about this timer, see 3GPP TS
36.321.

Indicates whether to enable or disable short DRX cycles for non-power-

saving UEs whose RFSP indexes are contained in the RFSP index set or
NO
to UEs whose capability information indicates that they do not support
power saving.
Indicates the length of a short DRX cycle that is applied only to non-
power-saving UEs whose subscriber profile ID for RAT/frequency priority
(RFSP) indexes are contained in the RFSP index set or to UEs whose
capability information indicates that they do not support power saving.
According to 3GPP specifications, the length of a long DRX cycle must
be an integer multiple of that of a short DRX cycle. In addition, the actual NO
value of LongDrxCycleSpecial assigned to a UE may be less than the
configured value because of the impact of the SRS bandwidth and TA
period specified by the TimeAlignmentTimer parameter. Therefore, the
actual value of ShortDrxCycleSpecial assigned to a UE may be less than
the configured value.
Indicates the length of the DRX Short Cycle Timer that applies only to
non-power-saving UEs whose RFSP indexes are contained in the RFSP
index set or to UEs whose capability information indicates that they do
not support power saving. The length of this timer is expressed in the
NO
number of short DRX cycles. If this parameter is set to 1, the length of
this timer is one short DRX cycle. If this parameter is set to 2, the length
of this timer is two short DRX cycles. For details, see 3GPP TS 36.321
5.7.

Indicates the long DRX cycle for intra-RAT ANR. If intra-RAT ANR is
enabled, this parameter is valid regardless of whether DRX is enabled. If
a long DRX cycle is configured for ANR measurement, it is
recommended that this parameter be set to a value equal to or greater NO
than 256 ms to ensure that the UE can successfully obtain the CGI of a
cell. However, if this parameter is set to a large value, the delay of
obtaining the CGI is large, and therefore the system delay increases.
Indicates the long DRX cycle for inter-RAT ANR. If inter-RAT ANR is
enabled, this parameter is valid regardless of whether DRX is enabled. If
there are multiple inter-RAT systems, and all of them require inter-RAT
ANR measurements, it is recommended that this parameter be set to the NO
maximum value of the long DRX cycle configured for inter-RAT ANR
measurements. Otherwise, the success rate for inter-RAT ANR
measurements may be affected.

Indicates the length of the discontinuous reception (DRX) inactivity timer

for automatic neighbor relation (ANR). If ANR is enabled, this parameter
NO
takes effect regardless whether the DRX feature is enabled. This
parameter applies only to the LTE FDD system.
Indicates the length of the DRX inactivity timer for automatic neighbor
relation (ANR). If ANR is enabled, this parameter takes effect regardless
NO
whether the DRX feature is enabled. This parameter applies only to LTE
TDD.

Indicates the extended QoS Class Identifier (QCI), which is required by

YES
the operator for user differentiation.

Indicates the service type corresponding to the extended QCI. NO

Indicates the weight factor used in the calculation of connection priorities
NO
during uplink scheduling.

Indicates the weight factor used in the calculation of connection priorities

NO
during downlink scheduling.

Indicates the uplink minimum guaranteed bit rate of the non-GBR

NO
service.
Indicates the downlink minimum guaranteed bit rate of the non-GBR
NO
service.

Indicates the pre-allocation weight. The pre-allocation weight of a UE is

the pre-allocation weight of services carried by the highest-priority logical
channel. If services carried by highest-priority logical channels have
different pre-allocation weights, the UE takes the highest pre-allocation
NO
weight. When resources are insufficient, pre-allocation weights affect the
pre-allocation probabilities of users. The pre-allocation probability has a
positive correlation with the pre-allocation weight. This parameter is QCI-
specific.

Indicates the group ID of the parameters related to the inter-RAT

NO
handover with the extended QCI.
Indicates the prioritized bit rate of the logical channel. The UE scheduler
guarantees prioritized bit rates of logical channels in descending order of NO
logical channel priority. For details, see 3GPP TS 36.321.

Indicates the priority of the logical channel. The UE scheduler

guarantees prioritized bit rates of logical channels in descending order of
logical channel priority. Resources are allocated in descending order of NO
logical channel priority after the prioritized bit rates of all services are
guaranteed. For details, see 3GPP TS 36.321.

Indicates the ID of an RLC/PDCP parameter group. NO

Indicates whether the extended QCI is specific to free users or paid
NO
users.

Indicates whether to enable flow control for the QCI. NO

Indicates whether this extended QCI is used as the dedicated QCI for
PTT services. If this parameter is set to YES(Yes), the eNodeB ensures
the service quality for services with this extended QCI the same as PTT
NO
services. If this parameter is set to NO(No), the eNodeB processes the
data of services with this extended QCI the same as common services
with an extended QCI.

Indicates the downlink scheduling priority of dedicated bearers for PTT

services. If the parameter is set to EQUAL_PRI_TO_QCI1(Priority same
as QCI1), the downlink scheduling priority of PTT services is the same
as VoIP services (with a QCI of 1). If this parameter is set to
HIGHER_PRI_THAN_QCI1(Priority Higher than QCI1), the downlink NO
scheduling priority of PTT services is higher than that of VoIP services
(with a QCI of 1). This parameter is valid only if the LtePttQoSSwitch
parameter is set to ON(On) and the LtePttDedicatedExtendedQci
parameter is set to YES(Yes).
Indicates the uplink scheduling priority of dedicated bearers for PTT
services. If the parameter is set to EQUAL_PRI_TO_QCI1(Priority same
as QCI1), the uplink scheduling priority of PTT services is the same as
VoIP services (with a QCI of 1). If this parameter is set to
HIGHER_PRI_THAN_QCI1(Priority Higher than QCI1), the uplink NO
scheduling priority of PTT services is higher than that of VoIP services
(with a QCI of 1). This parameter is valid only if the LtePttQoSSwitch
parameter is set to ON(On) and the LtePttDedicatedExtendedQci
parameter is set to YES(Yes).

Indicates the group ID of the parameters related to the inter-RAT

YES
handover with a specific QCI.

Indicates the policy of handovers to UTRAN.

PS_HO: indicates whether to allow PS handovers to UTRAN.
NO
SRVCC: indicates whether to allow transfers to UTRAN in SRVCC mode.
REDIRECTION: indicates whether to allow redirection to UTRAN.

Indicates the switch used to enable or disable the single radio voice call
continuity (SRVCC) handover to GERAN GSM.
If this switch is set to on, the UE can perform the SRVCC handover to
NO
the GERAN GSM cell.
If this switch is set to off, the UE cannot perform the SRVCC handover to
the GERAN GSM cell.

Indicates the policy of handovers to GPRS/EDGE. PS_HO: Indicates

whether PS handovers to neighboring GPRS/EDGE cells are allowed.
NACC_HO: Indicates whether NACC handovers to neighboring
GPRS/EDGE cells are allowed. CCO_HO: Indicates whether CCO
NO
handovers to neighboring GPRS/EDGE cells are allowed. SRVCC:
Indicates whether SRVCC handovers to neighboring GPRS/EDGE cells
are allowed. REDIRECTION: Indicates whether redirections to
neighboring GPRS/EDGE cells are allowed.

Indicates the switch used to enable or disable QCI-specific SRVCC to

CDMA2000 1xRTT.
If this switch is on, UEs can perform SRVCC to CDMA2000 1xRTT cells. NO
If this switch is off, UEs cannot perform SRVCC to CDMA2000 1xRTT
cells.
Indicates the policy of handovers to CDMA2000 HRPD networks.
NON_OPT_HO:
Indicates whether to allow non-optimized handovers to neighboring
CDMA2000 HRPD cells. NO
OPT_HO:
Indicates whether to allow optimized handovers to neighboring
CDMA2000 HRPD cells.

Indicates whether to permit or forbid the inter-RAT handover under the

NO
QCI.

Indicates whether to allow the fast ANR under the QCI. The function
specified by this parameter is an extended function and is reserved. The NO
current version does not support this function.

Indicates the index mapped to the MCS offset for channel quality
indicators (CQIs) transmitted with data on PUSCH. For details, see
3GPP TS 36.213. Some values are reserved, for example, values 0 and
NO
1 are reserved in 3GPP TS 36.213 Release 9. When this parameter is
set to a reserved value, a UE initiates an RRC connection
reestablishment or fails to access the network.
Indicates the index mapped to the MCS offset for rank indications (RIs)
transmitted with data on PUSCH. For details, see 3GPP TS 36.213.
Some values are reserved, for example, values 13, 14, and 15 are
NO
reserved in 3GPP TS 36.213 Release 9. When this parameter is set to a
reserved value, a UE initiates an RRC connection reestablishment or
fails to access the network.

Indicates the index mapped to the MCS offset for acknowledgments

(ACKs) transmitted with data on PUSCH. For details, see 3GPP TS
36.213. Some values are reserved, for example, value 15 is reserved in
NO
3GPP TS 36.213 Release 9. When this parameter is set to a reserved
value, a UE initiates an RRC connection reestablishment or fails to
access the network.

Indicates the ID of the RLC/PDCP parameter group. YES

Indicates the length of the PDCP discard timer. NO

Indicates the RLC transmission mode. Only the AM and UM modes are
NO
available.
Indicates the UE-specific maximum number of RLC ARQ
retransmissions, namely the maximum number of AM PDU
NO
retransmissions. When the number of retransmissions reaches the value
of this parameter, RRC connection re-establishment is initiated.
Indicates the eNodeB-specific maximum number of RLC ARQ
retransmissions, which limits the maximum number of acknowledged
mode (AM) PDU retransmissions. When the number of RLC ARQ NO
retransmissions reaches the value of this parameter, eNodeB releases
the UE.
Indicates the UE-specific data volume threshold of PDUs to trigger
polling. When the transmitted data volume reaches the value of this NO
parameter, the Poll flag is set in the PDU header.
Indicates the eNodeB-specific data volume threshold of PDUs to trigger
polling. When the transmitted data volume reaches the value of this NO
parameter, the Poll flag is set in the PDU header.
Indicates the UE-specific number of PDUs to trigger polling. When the
transmitted number of PDUs reaches the value of this parameter, the NO
Poll flag is set in the PDU header.
Indicates the eNodeB-specific number of PDUs to trigger polling. When
the transmitted number of PDUs reaches the value of this parameter, the NO
Poll flag is set in the PDU header.
Indicates the length of the Polling PDU retransmission timer for the UE. NO
Indicates the length of the Polling PDU retransmission timer for the
NO
eNodeB.
Indicates the length of the UE-specific timer for prohibiting status
NO
reporting from the receiver in AM.
Indicates the length of the eNodeB-specific timer for prohibiting status
NO
reporting from the receiver in AM.
Indicates the length of the UE-specific timer for reordering at the receiver
NO
in AM.
Indicates the length of the eNodeB-specific timer for reordering at the
NO
receiver in AM.

Indicates the length of a PDCP sequence number of a UL DRB in RLC

NO
UM.
Indicates the length of a UL RLC sequence number in UM. The length is
NO
permanently 10 bits in AM.

Indicates the length of a DL RLC sequence number in UM. The length is

NO
permanently 10 bits in AM.
Indicates the length of the UE-specific timer for reordering at the receiver
NO
in UM.
Indicates the length of the eNodeB-specific timer for reordering at the
NO
receiver in UM.

Indicates whether a PDCP status report is required upon handover in

NO
AM.
Indicates whether to enable the adaptive configuration of parameters
related to Radio Link Control (RLC). If this parameter is set to ON(On),
the eNodeB adaptively configures the lengths of the following timers
according to the number of UEs in the cell when new UEs access the
cell:
NO
(1) The polling PDU retransmission timer for the UE
(2) The polling PDU retransmission timer for the eNodeB
(3) The UE-specific timer for prohibiting status reporting from the receiver
(4) The eNodeB-specific timer for prohibiting status reporting from the
receiver
Indicates the length of the polling PDU retransmission timer for the
eNodeB, which is used when the RlcParaAdaptSwitch parameter is set NO
to ON(On) and the number of UEs in the cell is large.
Indicates the length of the eNodeB-specific timer for prohibiting status
reporting from the receiver, which is used when the RlcParaAdaptSwitch NO
parameter is set to ON(On) and the number of UEs in the cell is large.
Indicates the length of the polling PDU retransmission timer for the UE,
which is used when the RlcParaAdaptSwitch parameter is set to ON(On) NO
and the number of UEs in the cell is large.
Indicates the length of the UE-specific timer for prohibiting status
reporting from the receiver, which is used when the RlcParaAdaptSwitch NO
parameter is set to ON(On) and the number of UEs in the cell is large.

Indicates whether the eNodeB is compatible with the UE that does not
support the RLC transmission in unacknowledged mode (UM) mode. An
eNodeB configures the RLC transmission mode to UM mode of QCI 4, 6,
7, 8, or 9, and a UE that does not support the RLC transmission in UM
NO
mode attempts to set up bearers of QCI 4, 6, 7, 8, or 9. If this switch is
turned on, the eNodeB finds the QCI with the RLC transmission mode
set to acknowledged mode (AM) in the sequence of QCIs 9, 8, 6, and 4
and sets up the bearers in the AM mode of the queried QCI.
Indicates whether to enable separate configuration of the PDCP discard
NO
timer for the uplink and downlink.
Indicates the value of the downlink PDCP discard timer configured for
the eNodeB. If the duration of packets buffered in a PDCP entity
NO
exceeds the configured value, the eNodeB discards the packets. This
timer applies only to DRB data.

Indicates the SRB ID of the SRB RLC/PDCP parameter group. The SRB
YES
ID can be SRB1 or SRB2.

Indicates the UE-specific maximum number of RLC ARQ

retransmissions, namely the maximum number of AM PDU
retransmissions. When the number of retransmissions reaches the value
NO
of this parameter, RRC connection re-establishment is initiated. If you
need to change the value of this parameter, ask for assistance from
Huawei technical support personnel.
Indicates the eNodeB-specific maximum number of RLC ARQ
retransmissions, which limits the maximum number of acknowledged
mode (AM) PDU retransmissions. When the number of RLC ARQ
NO
retransmissions reaches the value of this parameter, eNodeB releases
the UE. If you need to change the value of this parameter, ask for
assistance from Huawei technical support personnel.

Indicates the UE-specific data volume threshold of PDUs to trigger

polling. When the transmitted data volume reaches the value of this
parameter, the Poll flag is set in the PDU header. If you need to change NO
the value of this parameter, ask for assistance from Huawei technical
support personnel.
Indicates the eNodeB-specific data volume threshold of PDUs to trigger
polling. When the transmitted data volume reaches the value of this
parameter, the Poll flag is set in the PDU header. If you need to change NO
the value of this parameter, ask for assistance from Huawei technical
support personnel.
Indicates the UE-specific number of PDUs to trigger polling. When the
transmitted number of PDUs reaches the value of this parameter, the
NO
Poll flag is set in the PDU header. If you need to change the value of this
parameter, ask for assistance from Huawei technical support personnel.
Indicates the eNodeB-specific number of PDUs to trigger polling. When
the transmitted number of PDUs reaches the value of this parameter, the
NO
Poll flag is set in the PDU header. If you need to change the value of this
parameter, ask for assistance from Huawei technical support personnel.
Indicates the length of the Polling PDU retransmission timer for the UE. If
you need to change the value of this parameter, ask for assistance from NO
Huawei technical support personnel.
Indicates the length of the Polling PDU retransmission timer for the
eNodeB. If you need to change the value of this parameter, ask for NO
assistance from Huawei technical support personnel.
Indicates the length of the UE-specific timer for prohibiting status
reporting from the receiver in AM. If you need to change the value of this NO
parameter, ask for assistance from Huawei technical support personnel.
Indicates the length of the eNodeB-specific timer for prohibiting status
reporting from the receiver in AM. If you need to change the value of this NO
parameter, ask for assistance from Huawei technical support personnel.
Indicates the length of the UE-specific timer for reordering at the receiver
in AM. If you need to change the value of this parameter, ask for NO
assistance from Huawei technical support personnel.
Indicates the length of the eNodeB-specific timer for reordering at the
receiver in AM. If you need to change the value of this parameter, ask for NO
assistance from Huawei technical support personnel.

Indicates the QoS Class Identifier (QCI) of an EPS bearer. Different QCIs
represent different QoS specifications such as the packet delay budget,
YES
packet error loss rate, and resource type (whether the service is a GBR
service or not). For details, see Table 6.1.7 in 3GPP TS 23.203.
Indicates the weight factor used in the calculation of connection priorities
NO
during uplink scheduling.

Indicates the weight factor used in the calculation of connection priorities

NO
during downlink scheduling.

Indicates the uplink minimum guaranteed bit rate of the non-GBR

NO
service.
Indicates the downlink minimum guaranteed bit rate of the non-GBR
NO
service.

Indicates the pre-allocation weight. The pre-allocation weight of a UE is

the pre-allocation weight of services carried by the highest-priority logical
channel. If services carried by highest-priority logical channels have
different pre-allocation weights, the UE takes the highest pre-allocation
NO
weight. When resources are insufficient, pre-allocation weights affect the
pre-allocation probabilities of users. The pre-allocation probability has a
positive correlation with the pre-allocation weight. This parameter is QCI-
specific.

Indicates the ID of a parameter group related to inter-RAT handover. NO

Indicates the ID of an RLC/PDCP parameter group. NO

Indicates the prioritized bit rate of the logical channel. The UE scheduler
guarantees prioritized bit rates of logical channels in descending order of NO
logical channel priority. For details, see 3GPP TS 36.321.

Indicates the priority of the logical channel. The UE scheduler

guarantees prioritized bit rates of logical channels in descending order of
logical channel priority. Resources are allocated in descending order of NO
logical channel priority after the prioritized bit rates of all services are
guaranteed. For details, see 3GPP TS 36.321.
Indicates whether to enable flow control for the QCI. NO

Indicates the QoS class identifier (QCI) of an evolved packet system

(EPS) bearer. Different QCIs indicate different QoS requirements, such
YES
as the packet delay budget, packet error loss rate, and resource type.
For details, see Table 6.1.7 in 3GPP TS 23.203.
Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates the type of adaptive selection between beamforming and
MIMO for a multi-antenna eNodeB. The values are described as follows:
NO_ADAPTIVE: A fixed beamforming or MIMO transmission mode is
used. That is, transition between the beamforming and MIMO
transmission modes is not supported.
TxD_BF_ADAPTIVE: The transmission mode changes adaptively NO
between TM2 and TM7 or between TM2 and TM8, depending on the
protocol release with which UEs comply.
MIMO_BF_ADAPTIVE(MIMO_BF_ADAPTIVE): The transmission mode
changes adaptively between TM2, TM3, and TM7 or between TM2, TM3,
and TM8, depending on the protocol release with which UEs comply.
Indicates the fixed beamforming or MIMO transmission mode configured
for a multi-antenna eNodeB. This parameter is valid only when
BfMimoAdaptiveSwitch is set to NO_ADAPTIVE. The values are
described as follows:
TM2: Transmission mode 2 is always used for UEs.
TM3: Transmission mode 3 is always used for UEs. NO
TM7: Transmission mode 7 is always used for UEs.
TM8: Transmission mode 8 is always used for UEs.
TM4: Transmission mode 4 is always used for UEs.
TM9 w/o PMI: Open-loop transmission mode 9 is always used for UEs.
TM9 w PMI: Close-loop transmission mode 9 is always used for UEs.
Indicates whether to enable or disable adaptive CQI reporting. If this
parameter is set to ON, the CQI period adaptively changes based on the
NO
air interface load of the cell. If this parameter is set to OFF, the CQI
period is the specified by the UserCqiPeriodCfg parameter.

Indicates the fixed CQI period. A fixed CQI period is used when CQI
period adaptation is disabled. If the UserCqiPeriodCfg parameter is set
NO
to 2 ms for TDD cells, the eNodeB automatically changes the value to 5
ms.
Indicates whether CQI and Ack or Nack can be concurrently sent over
the PUCCH. For details, see the contents related to PUCCH format in
3GPP TS36.213. When this parameter is set to OFF, the value of
simultaneousAckNackAndCQI becomes False, that is, CQI and Ack or
NO
Nack cannot be sent simultaneously over the PUCCH. When this
parameter is set to ON, the value of simultaneousAckNackAndCQI
becomes True, that is, CQI and Ack or Nack can be sent simultaneously
over the PUCCH.
Indicates whether to enable the optimization on CQI reporting periods
and PUCCH resources for CQI reporting. If this switch is turned on, the
eNodeB configures less UEs with a short CQI reporting period,
decreasing PUCCH resources to be used and increasing available
NO
PUSCH resources. If this switch is turned off, the eNodeB configures
more UEs with a short CQI reporting period, increasing PUCCH
resources to be used and decreasing available PUSCH resources.This
parameter applies only to LTE FDD cells.

Indicates the aperiodic CQI reporting configurations and the trigger

condition of aperiodic CQI reporting during handovers. When this switch
is turned on, the aperiodic CQI reporting configurations are included in
handover commands. If no periodic CQI reporting configurations is
NO
configured for a UE, an aperiodic CQI reporting is triggered after the UE
is handed over and then has data to transmit. When this switch is turned
off, the aperiodic CQI reporting configurations are not included in
handover commands but are configured after the UE is handed over.
Indicates the type of adaptive MIMO for a multi-antenna eNodeB. The
values are described as follows:
NO_ADAPTIVE: A fixed MIMO transmission mode is used. That is,
transition between MIMO transmission modes is not supported.
OL_ADAPTIVE: The open-loop adaptive MIMO transmission mode is
used. In this mode, UEs report RI and CQI values but do not report PMI NO
values to the eNodeB.
CL_ADAPTIVE: The closed-loop adaptive MIMO transmission mode is
used. In this mode, UEs report RI, CQI, and PMI values to the eNodeB.
OC_ADAPTIVE: UEs switch between the open-loop and closed-loop
adaptive MIMO transmission modes automatically.
Indicates the fixed MIMO transmission mode configured by a multi-
antenna eNodeB for UEs. This parameter is valid only when
MimoAdaptiveSwitch is set to NO_ADAPTIVE. There are four values.
TM2: Transmission mode 2 is permanently applied to UEs. NO
TM3: Transmission mode 3 is permanently applied to UEs.
TM4: Transmission mode 4 is permanently applied to UEs.
TM6: Transmission mode 6 is permanently applied to UEs.
Indicates the MIMO transmission mode used during initial network
access.
If this parameter is set to TM2(TM2), the MIMO transmission mode used
during initial network access is TM2.
If this parameter is set to ADAPTIVE(ADAPTIVE), the MIMO
transmission mode used during initial network access is determined by
the ADAPTIVE_MIMO_TYPE and FIXED_MIMO_TYPE settings. If the NO
MimoAdaptiveSwitch parameter is set to NO_ADAPTIVE, the initial
MIMO transmission mode is determined by the setting of the
FixedMimoMode parameter. If the MimoAdaptiveSwitch parameter is set
to OL_ADAPTIVE or OC_ADAPTIVE, the initial MIMO transmission
mode is TM3. If the MimoAdaptiveSwitch parameter is set to
CL_ADAPTIVE, the initial MIMO transmission mode is TM4.

Indicates whether to enable or disable SRS period adaptation. If this

parameter is set to ON, the SRS period adaptively changes based on the
NO
SRS algorithm. If this parameter is set to OFF, the SRS period is the
specified by the UserSrsPeriodCfg parameter.
Indicates the fixed SRS period. A fixed SRS period is used when SRS
NO
period adaptation is disabled.

Indicates the type allocation code (TAC) in the IMEISV of abnormal UEs.
The TAC identifies the UE model.For details about the definition of YES
IMEISV, see section 6.2.2 in 3GPP TS 23.003.

Indicates whether the SVN is required to be specified in the IMEISV of

NO
abnormal UEs.

Indicates the software version number (SVN) which is an element of the

international mobile station equipment identity and software version
(IMEISV) and specifies the software version of UEs. For details about
NO
the definition of IMEISV, see section 6.2.2 in 3GPP TS 23.003. If the
ImeisvSvnCfgInd parameter is set to NOT_CFG(NOT_CFG), the GUI
value of the ImeisvSvn parameter is NULL.
Indicates whether to blacklist some features. LteAnrSwitchOff: This
option is used to control whether disable intra-RAT ANR for abnormal
UEs. If this option is selected, the following functions are disabled for
abnormal UEs: intra-RAT event-triggered ANR, intra-RAT fast ANR,
active PCI conflict detection, ANR management based on the specified
PCI group, and E-UTRAN measurements related to event-triggered ANR
triggered by MLB measurements controlled by
MlbBasedEventAnrSwitch. UtranAnrSwitchOff: This option is used to
control whether to disable ANR with UTRAN for abnormal UEs. If this
option is selected, the following functions are disabled for abnormal UEs:
event-triggered ANR with UTRAN, fast ANR with UTRAN, and UTRAN
measurements related to event-triggered ANR triggered by MLB
measurements controlled by MlbBasedEventAnrSwitch.
GeranAnrSwitchOff: This option is used to control whether to disable
ANR with GERAN for abnormal UEs. If this option is selected, the
following functions are disabled for abnormal UEs: event-triggered ANR
with GERAN, fast ANR with GERAN, and GERAN measurements related
to event-triggered ANR triggered by MLB measurements controlled by
NO
MlbBasedEventAnrSwitch. CdmaAnrSwitchOff: This option is used to
control whether to disable ANR with CDMA2000. If this option is
selected, the following functions are disabled for abnormal UEs: fast
ANR with CDMA2000 and event-triggered ANR with CDMA2000.
DynamicDrxSwitchOff: If this option is selected, dynamic DRX is disabled
for abnormal UEs. CaSwitchOff: If this option is selected, SCCs are not
configured for abnormal UEs and PCC anchoring is disabled for
abnormal UEs. TtiBundlingSwitchOff: If this option is selected, TTI
bundling is disabled for abnormal UEs. MimoTmMode: If this option is
selected, the MimoAdaptiveSwitch and InitialMimoType parameters are
set to OL_ADAPTIVE and ADAPTIVE, respectively, for abnormal UEs.
AperiodicCqiRptSwitchOff: If this option is selected, enhanced aperiodic
CQI reporting is disabled for abnormal UEs. RohcSwitchOff: If this option
is selected, ROHC is disabled for abnormal UEs.
Tdd2CCDlCaEnhanceSwitchOff: If this option is selected, the function of
enhanced DL ACK demodulation with two TDD component carriers
aggregated is disabled for abnormal UEs. This option applies only to LTE
TDD.

Indicates the description of the model of abnormal UE. NO

Indicates the QoS class identifier (QCI).

QCI 1 indicates voice services.
QCI 2 indicates video (live streaming) services.
QCI 3 indicates real-time gaming services.
YES
QCI 4 indicates video (buffered streaming) services.
QCI 5 indicates IMS signaling.
QCI 7 indicates voice, video, and interactive gaming services.
QCIs 6, 8, and 9 indicate video services and TCP-based services.
Indicates the length of the timer for periodic transmission of buffer status
reports (BSRs).
BSRs are sent periodically or as triggered by events.
Periodic transmission of BSRs uses the timer specified by this NO
parameter.
When the timer expires, a BSR is sent.
After the BSR is sent, the timer is restarted.

Indicates the length of the BSR (Buffer Status Report) retransmission

NO
timer. This timer is started after a BSR is sent.
Indicates the measurement gap pattern.
The eNodeB defines measurement gaps for UEs in connected mode.
During the measurement gaps, a UE measures the signal quality of the
cells on a specific frequency.
There are two gap patterns: pattern 1 and pattern 2. In pattern 1, the gap NO
width is 6 ms and the repetition period is 40 ms. In pattern 2, the gap
width is 6 ms and the repetition period is 80 ms. For details, see 3GPP
TS 36.331. Pattern 1 and pattern 2 correspond to Gap Pattern Id 0 and
Gap Pattern Id 1 in 3GPP TS 36.331, respectively.

Indicates the upper-layer filtering coefficient for RSRP measurements on

E-UTRAN.
A larger value of this parameter indicates a stronger smoothing effect NO
and higher resistance to fast fading, but it may weaken the tracing
capability towards varying signals. For details, see 3GPP TS 36.331.

Indicates the upper-layer filtering coefficient for RSRQ measurements on

E-UTRAN.
A larger value of this parameter indicates a stronger smoothing effect NO
and higher resistance to fast fading, but it may weaken the tracing
capability towards varying signals. For details, see 3GPP TS 36.331.
Indicates the L3 filtering coefficient used for the measurement quantity in
inter-RAT measurements of GERAN.
A great value of this parameter indicates a strong smoothing effect and a NO
high anti-fast-fading capability, but a low signal change tracing capability.
For details, see 3GPP TS 36.331.

Indicates whether the measurement threshold needs to be set. NO

Indicates the threshold below which measurements on neighboring cells
are started. If the signal quality of the serving cell exceeds this threshold,
NO
the UE is not required to perform intra-frequency, inter-frequency, or
inter-RAT measurements, leading to reduced power consumption.
Indicates whether mobility-based cell handover measurement
NO
parameters need to be set.
Indicates the cycle during which evaluations of the UE medium and high
mobility states in RRC_CONNECTED mode are performed. It is one of
the key parameters in deciding on a UE's mobility state. If this parameter
is set to a small value, switchings among mobility states may be frequent NO
and the decision precision may be relatively low. If this parameter is set
to a large value, switchings among mobility states are less frequent and
the decision precision is relatively high.
Indicates the cycle during which evaluations of the UE normal mobility
state in RRC_CONNECTED mode are performed. It is one of the key
parameters in deciding on a UE's mobility state. If this parameter is set to
a small value, switchings among mobility states may be frequent and the NO
decision precision may be relatively low. If this parameter is set to a large
value, switchings among mobility states are less frequent and the
decision precision is relatively high.
Indicates the handover number threshold used in the UE medium
mobility state evaluation. If the number of handovers performed during a
period of time specified by the TcrMaxConnMode parameter exceeds the NO
value of this parameter, the UE is considered to be in medium mobility
state and its handover-related parameters are adjusted.
Indicates the handover number threshold used in the UE high mobility
state evaluation. If the number of handovers performed during a period
of time specified by the TcrMaxConnMode parameter exceeds the value NO
of this parameter, the UE is considered to be in high mobility state and its
handover-related parameters are adjusted.
Indicates the scaling factor for the time-to-trigger defined for medium-
mobility UEs. For a UE in medium mobility, the time-to-trigger used in
NO
event evaluation is multiplied by this scaling factor, to facilitate triggering
of the handover.
Indicates the scaling factor for the time-to-trigger defined for high-
mobility UEs. For a UE in high mobility, the time-to-trigger used in event
NO
evaluation is multiplied by this scaling factor, to facilitate triggering of the
handover.

Indicates the filtering coefficient for RSCP measurements on UTRAN.

A larger value of this parameter indicates a stronger smoothing effect
NO
and higher resistance to fast fading, but it may weaken the tracing
capability towards varying signals. For details, see 3GPP TS 36.331.

Indicates the upper-layer filtering coefficient for Ec/No measurements on

UTRAN.
A larger value of this parameter indicates a stronger smoothing effect NO
and higher resistance to fast fading, but it may weaken the tracing
capability towards varying signals. For details, see 3GPP TS 36.331.
Indicates the punishment time for handover preparation failures in
optimized handovers, including frequency-priority-based handovers,
NO
service-based handovers, SPID-based handovers back to the HPLMN,
and QoE-based handovers.

Indicates the maximum number of cells to be included in the

measurement report after an inter-RAT handover event or a periodic
NO
inter-RAT measurement for ANR purposes is triggered. For details, see
3GPP TS 36.331.
Indicates the number of periodical measurement reports to be sent after
an inter-RAT handover event is triggered. It is used to prevent the impact
NO
of measurement report loss and internal processing failure on the
handover. For details, see 3GPP TS 36.331.

Indicates the interval at which periodic measurement reports are sent to

the eNodeB after the event for inter-RAT handover to GERAN is
NO
triggered.
For details, see 3GPP TS 36.331.
Indicates the quantity to be measured for handovers to UTRAN. For
details, see 3GPP TS 36.331. This parameter is dedicated to UTRAN
FDD. The RSCP values are relatively stable, while the ECN0 values may
vary with the network load. The value BOTH applies only to UEs
complying with 3GPP Release 10. For UEs complying with 3GPP
Release 8 or 9, the value BOTH takes the same effect as the value
RSCP. In QoE-based handovers, this parameter does not apply to UEs
complying with 3GPP Release 8 or 9 and the measurement quantity is NO
fixed to ECN0 for such UEs.
If this parameter is set to RSCP, the eNodeB delivers RSCP-based
UTRAN measurement configurations to UEs. If this parameter is set to
ECN0, the eNodeB delivers ECN0-based UTRAN measurement
configurations to UEs. If this parameter is set to BOTH, the eNodeB
delivers both RSCP- and ECN0-based UTRAN measurement
configurations to UEs complying with 3GPP Release 10.

Indicates the interval at which periodical measurement reports are sent

after the event for the handover to UTRAN is triggered. NO
For details, see 3GPP TS 36.331.

Indicates the measurement quantity required for the inter-RAT handover

NO
to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.
Indicates the interval at which periodic measurement reports are sent to
the eNodeB after the event for inter-RAT handover to CDMA2000 1xRTT
NO
is triggered.
For details, see 3GPP TS 36.331.

Indicates the measurement quantity required for the inter-RAT handover

NO
to CDMA2000 HRPD. For details, see 3GPP TS 36.331.

Indicates the interval at which periodic measurement reports are sent to

the eNodeB after the event for inter-RAT handover to CDMA2000 HRPD
NO
is triggered.
For details, see 3GPP TS 36.331.
Indicates the trigger quantity for inter-RAT measurement event A1/A2.
The quantity can be RSRP, RSRQ, or both. The measured RSRP values
are stable, varying little with the load, and therefore there is little signal
NO
fluctuation. The measured RSRQ values vary with the load and are likely
to reflect the signal quality of the cell in real time. For details, see 3GPP
TS 36.331.

Indicates the type of the inter-RAT handover event. The event type can
be B1 or B2. This parameter applies only to coverage-based handovers. NO
For details, see 3GPP TS 36.331.

Indicates the timer for measurements on CDMA2000 1xRTT cells. NO

Indicates the number of CDMA2000 1xRTT cells whose reference signal

NO
strength is used to calculate the target reference signal strength.

Indicates the mode of selecting a CDMA2000 HRPD frequency. NO

Indicates the mode of selecting a CDMA2000 1xRTT frequency. NO

Indicates whether eCSFB is based on redirection. NO

Indicates the measurement mode for eCSFB. NO

Indicates the mode of selecting a sector ID during eCSFB. NO

Indicates the maximum number of UTRAN cell system information

NO
messages that can be transmitted during a flash redirection procedure.

Indicates the maximum number of GERAN cell system information

NO
messages that can be transmitted during a flash redirection procedure.

Indicates the maximum number of GERAN cell system information

messages that can be transmitted during a CSFB emergency redirection NO
procedure.

Indicates the maximum number of UTRAN cell system information

messages that can be transmitted during a CSFB emergency redirection NO
procedure.
Indicates the method of selecting reference cells during an optimized
handover from the E-UTRAN to the CDMA2000 eHRPD network. One
method is selecting reference cells configured on the eNodeB. The other NO
method is selecting CDMA2000 eHRPD neighboring cells with the best
signal quality. The signal quality is included in the measurement report.

Indicates the PLMN determination mechanism used in blind redirections

from E-UTRAN to UTRAN/GERAN when the PLMN for the neighboring
frequency (or frequency group) is not configured. If this parameter is set
NO
to ON(On), the PLMN for the neighboring frequency (or frequency group)
is the serving PLMN of the UE. If this parameter is set to OFF(Off), the
frequency (or frequency group) does not belong to any PLMNs.
Indicates the maximum number of cells to be included in the
measurement report after an intra-RAT inter-frequency or intra-RAT intra-
frequency measurement event for handover purposes or a periodic intra- NO
RAT measurement for ANR purposes is triggered. For details, see 3GPP
TS 36.331.

Indicates the number of periodical measurement reports to be sent after

an event for the intra- or inter-frequency handover within the E-UTRAN is
triggered. NO
It is used to prevent the impact of measurement report loss and internal
processing failure on the handover. For details, see 3GPP TS 36.331.
Indicates the quantity used to evaluate the triggering condition for the
intra-frequency handover event. The quantity can be RSRP or RSRQ.
The measured RSRP values are stable, varying little with the load, and
therefore there is little signal fluctuation. The measured RSRQ values NO
vary with the load and are likely to reflect the signal quality of the cell in
real time.
For details, see 3GPP TS 36.331.

Indicates the quantity to be included in the measurement report for the

intra-frequency handover event. The quantity can be RSRP, RSRQ, or
both.
The measured RSRP values are stable, varying little with the load, and
therefore there is little signal fluctuation. The measured RSRQ values
vary with the load and are likely to reflect the signal quality of the cell in
NO
real time. Even when this parameter is set to BOTH, the eNodeB triggers
a handover based on the setting of the IntraFreqHoA3TrigQuan
parameter.The value of this parameter is also used as the quantity to be
included in the measurement report between A3-related inter-frequency
measurement reports.
For details, see 3GPP TS 36.331.

Indicates the interval between periodic measurement reports that are

sent after an intra-frequency handover is triggered. The value of this
parameter is also used as the interval between A3-related inter- NO
frequency measurement reports.
For details, see 3GPP TS 36.331.
Indicates the quantity to be included in the measurement report for inter-
frequency handover events. The quantity can be RSRP, RSRQ, or both.
The measured RSRP values are stable, slightly varying with the load,
and therefore there is little signal fluctuation. The measured RSRQ NO
values vary with the load and are likely to reflect the signal quality of the
cell in real time. This parameter applies to measurements for event
A4/A5. For details, see 3GPP TS 36.331.

Indicates the interval at which periodical measurement reports are sent

after an inter-frequency handover event is triggered. NO
For details, see 3GPP TS 36.331.
Indicates the trigger quantity for event A1/A2 related to event-A4/A5-
triggered inter-frequency handover. The quantity can be RSRP, RSRQ,
or both. The measured RSRP values are stable, varying little with the
NO
load, and therefore there is little signal fluctuation. The measured RSRQ
values vary with the load and are likely to reflect the signal quality of the
cell in real time. For details, see 3GPP TS 36.331.

Indicates the trigger quantity for event A1/A2 related to frequency-

priority-based inter-frequency handover. The quantity can be RSRP,
RSRQ, or both. The measured RSRP values are stable, varying little with
NO
the load, and therefore there is little signal fluctuation. The measured
RSRQ values vary with the load and are likely to reflect the signal quality
of the cell in real time. For details, see 3GPP TS 36.331.

Indicates the trigger quantity for event A3/A4/A5 measurement reports of

all inter-frequency handovers except coverage-based inter-frequency NO
handover.
Indicates the timer for the eNodeB to wait for more measurement reports
to determine whether to perform a coverage-based inter-frequency NO
handover after the eNodeB receives a measurement report.

Indicates the trigger quantity for event A1/A2 related to event-A3-

triggered inter-frequency handover. The quantity can be RSRP, RSRQ,
or both. The measured RSRP values are stable, varying little with the
NO
load, and therefore there is little signal fluctuation. The measured RSRQ
values fluctuate greatly with the load and therefore reflect the signal
quality of the cell in real time. For details, see 3GPP TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the time-to-trigger for event B1 that is used in CS fallback to
UTRAN. When CS fallback to UTRAN is applicable, this parameter is set
for UEs and used in the evaluation of whether to trigger event B1. When
detecting that the signal quality in at least one UTRAN cell meets the
entering condition, the UE does not send a measurement report to the
eNodeB immediately. Instead, the UE sends a report only when the NO
signal quality continuously meets the entering condition during the time-
to-trigger. This parameter helps decrease the number of occasionally
triggered event reports, the average number of handovers, and the
number of wrong handovers, and thus helps to prevent unnecessary
handovers. For details, see 3GPP TS 36.331.

Indicates the time-to-trigger for event B1 that is used in CS fallback to

GERAN. When CS fallback to GERAN is applicable, this parameter is set
for UEs and used in the evaluation of whether to trigger event B1. When
detecting that the signal quality in at least one GERAN cell meets the
entering condition, the UE does not send a measurement report to the
eNodeB immediately. Instead, the UE sends a report only when the NO
signal quality continuously meets the entering condition during the time-
to-trigger. This parameter helps decrease the number of occasionally
triggered event reports, the average number of handovers, and the
number of wrong handovers, and thus helps to prevent unnecessary
handovers. For details, see 3GPP TS 36.331.

Indicates the time-to-trigger for event B1, which is used in CS fallback to

CDMA2000. When CS fallback to CDMA2000 is applicable, this
parameter is set for UEs and used in the evaluation of whether to trigger
event B1. When detecting that the signal quality in at least one
CDMA2000 cell meets the entering condition, the UE does not send a
measurement report to the eNodeB immediately. Instead, the UE sends NO
a report only when the signal quality continuously meets the entering
condition during the time-to-trigger. This parameter helps reduce the
number of occasionally triggered event reports, the average number of
handovers, and the number of wrong handovers, and hence helps to
prevent unnecessary handovers. For details, see 3GPP TS 36.331.

Indicates the RSCP threshold for event B1, which is used in CS fallback
to UTRAN. When CS fallback to UTRAN is applicable, this parameter is
set for UEs and used in the evaluation about whether to trigger event B1.
This parameter indicates the RSCP requirement for the UTRAN cells to
NO
be included in the measurement report. A UE sends a measurement
report related to event B1 to the eNodeB when the RSCP in at least one
UTRAN cell exceeds this threshold and other triggering conditions are
met. For details, see 3GPP TS 36.331.
Indicates the Ec/N0 threshold for event B1, which is used in CS fallback
to UTRAN. When CS fallback to UTRAN is required, this parameter is
set for UEs and used in the evaluation about whether to trigger event B1.
This parameter indicates the Ec/N0 requirement for the UTRAN cells to
be included in the measurement report. A UE sends a measurement
report related to event B1 to the eNodeB when the Ec/N0 in at least one NO
UTRAN cell exceeds this threshold and other triggering conditions are
met. For a cell with large signal fading variance, set this parameter to a
large value to prevent unnecessary handovers. For a cell with small
signal fading variance, set this parameter to a small value to ensure
timely handovers. For details, see 3GPP TS 36.331.

Indicates the RSSI threshold for event B1 that is used in CS fallback to

GERAN. A UE sends a measurement report related to event B1 to the
eNodeB when the RSSI in at least one GERAN cell exceeds this NO
threshold and other triggering conditions are met. For details, see 3GPP
TS 36.331.

Indicates the pilot strength threshold related to event B1, which is used
in CS fallback to CDMA2000. A UE sends a measurement report related
to event B1 to the eNodeB when the pilot strength in at least one NO
CDMA2000 cell exceeds this threshold and other triggering conditions
are met. For details, see 3GPP TS 36.331.

Indicates the reference signal received power (RSRP) threshold for

event A1 associated with CSFB-triggered adaptive blind handovers. This
parameter is set for a UE as a triggering condition of event A1
measurement related to a CSFB-triggered adaptive blind handover. This
NO
parameter specifies the RSRP threshold of the serving cell above which
a CSFB-triggered adaptive blind handover is triggered. If the RSRP
value measured by a UE exceeds this threshold, the UE submits a
measurement report related to event A1.
Indicates the timer governing the period in which only CSFB can be
performed . After the timer expires, the eNodeB performs a blind NO
redirection for the UE.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates whether to configure the access barring information. NO

Indicates the emergency call barring status of access class 10, indicating
whether UEs of access class 10 can initiate emergency calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access classes 0 to
9 or those without IMSIs cannot initiate emergency calls. If this
parameter is set to BOOLEAN_FALSE, UEs of access classes 0 to 9
NO
and those without IMSIs can initiate emergency calls.
A UE in access classes 11 to 15 cannot initiate emergency calls only
when its access class and access class 10 are both barred. If its access
class or access class 10 is not barred, emergency calls initiated by the
UE are granted access.

Indicates whether to configure the access barring information for mobile-

NO
originated calls.
Indicates the access probability factor for mobile-originated calls. A
mobile-originated call is granted access if the random number generated
by the UE is less than this access probability factor; otherwise, the
access request is rejected. According to 3GPP TS 36.331, if any of the
parameters AC11BarforCall, AC12BarforCall, AC13BarforCall, NO
AC14BarforCall, and AC15BarforCall is set to BOOLEAN_TRUE, the
eNodeB sends UEs P00 as the access probability factor for mobile-
originated calls in the system information block type 2 (SIB2), regardless
of the actual setting of the AcBarringFactorForCall parameter.

Indicates the average access barring duration for mobile-originated calls. NO

Indicates the mobile-originated call barring status of access class 11,
indicating whether UEs of access class 11 can initiate mobile-originated
calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 11 NO
cannot initiate mobile-originated calls. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 11 can initiate mobile-originated
calls.

Indicates the mobile-originated call barring status of access class 12,

indicating whether UEs of access class 12 can initiate mobile-originated
calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 12 NO
cannot initiate mobile-originated calls. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 12 can initiate mobile-
originated calls.

Indicates the mobile-originated call barring status of access class 13,

indicating whether UEs of access class 13 can initiate mobile-originated
calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 13 NO
cannot initiate mobile-originated calls. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 13 can initiate mobile-
originated calls.

Indicates the mobile-originated call barring status of access class 14,

indicating whether UEs of access class 14 can initiate mobile-originated
calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 14 NO
cannot initiate mobile-originated calls. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 14 can initiate mobile-
originated calls.

Indicates the mobile-originated call barring status of access class 15,

indicating whether UEs of access class 15 can initiate mobile-originated
calls.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 15 NO
cannot initiate mobile-originated calls. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 15 can initiate mobile-
originated calls.
Indicates whether to configure the access barring information for
NO
signaling.

Indicates the access probability factor for signaling. Signaling from a UE

is granted access if the random number generated by the UE is less than
this access probability factor; otherwise, the access request is rejected.
According to 3GPP TS 36.331, if any of the parameters AC11BarForSig,
AC12BarForSig, AC13BarForSig, AC14BarForSig, and AC15BarForSig NO
is set to BOOLEAN_TRUE, the eNodeB sends UEs P00 as the access
probability factor for signaling in the system information block type 2
(SIB2), regardless of the actual setting of the AcBarringFactorForSig
parameter.
Indicates the average access barring duration for signaling. NO

Indicates the signaling barring status of access class 11, indicating

whether UEs of access class 11 can initiate signaling access.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 11 NO
cannot initiate signaling access. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 11 can initiate signaling access.

Indicates the signaling barring status of access class 12, indicating

whether UEs of access class 12 can initiate signaling access.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 12
NO
cannot initiate signaling access. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 12 can initiate signaling
access.

Indicates the signaling barring status of access class 13, indicating

whether UEs of access class 13 can initiate signaling access.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 13
NO
cannot initiate signaling access. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 13 can initiate signaling
access.
Indicates the signaling barring status of access class 14, indicating
whether UEs of access class 14 can initiate signaling access.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 14
NO
cannot initiate signaling access. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 14 can initiate signaling
access.

Indicates the signaling barring status of access class 15, indicating

whether UEs of access class 15 can initiate signaling access.
If this parameter is set to BOOLEAN_TRUE, UEs of access class 15
NO
cannot initiate signaling access. If this parameter is set to
BOOLEAN_FALSE, UEs of access class 15 can initiate signaling
access.

Indicates whether to configure the access barring information for

NO
multimedia telephony (MMTEL) voice services.
Indicates the access probability factor for multimedia telephony (MMTEL)
voice services. An MMTEL voice service is granted access if the random
NO
number generated by the UE is less than this access probability factor;
otherwise, the access request is barred.

Indicates the average access barring time of multimedia telephony

NO
(MMTEL) voice services.
Indicates whether multimedia telephony (MMTEL) voice services initiated
by UEs of AC 11 to AC 15 are granted access.
AC11BARSTATE: If this option is selected, the MMTEL voice services
initiated by UEs of AC 11 in idle mode are barred.
AC12BARSTATE: If this option is selected, the MMTEL voice services
initiated by UEs of AC 12 in idle mode are barred.
NO
AC13BARSTATE: If this option is selected, the MMTEL voice services
initiated by UEs of AC 13 in idle mode are barred.
AC14BARSTATE: If this option is selected, the MMTEL voice services
initiated by UEs of AC 14 in idle mode are barred.
AC15BARSTATE: If this option is selected, the MMTEL voice services
initiated by UEs of AC 15 in idle mode are barred.

Indicates whether to configure the access barring information for

NO
multimedia telephony (MMTEL) video services.
Indicates the access probability factor for multimedia telephony (MMTEL)
video services. An MMTEL video service is granted access if the random
NO
number generated by the UE is less than this access probability factor;
otherwise, the access request is barred.

Indicates the average access barring time of multimedia telephony

NO
(MMTEL) video services.
Indicates whether multimedia telephony (MMTEL) video services initiated
by UEs of AC 11 to AC 15 are granted access.
AC11BARSTATE: If this option is selected, the MMTEL video services
initiated by UEs of AC 11 in idle mode are barred.
AC12BARSTATE: If this option is selected, the MMTEL video services
initiated by UEs of AC 12 in idle mode are barred.
NO
AC13BARSTATE: If this option is selected, the MMTEL video services
initiated by UEs of AC 13 in idle mode are barred.
AC14BARSTATE: If this option is selected, the MMTEL video services
initiated by UEs of AC 14 in idle mode are barred.
AC15BARSTATE: If this option is selected, the MMTEL video services
initiated by UEs of AC 15 in idle mode are barred.

Indicates whether to configure the access barring information for CS

NO
fallback (CSFB) services.
Indicates the access probability factor for CS fallback (CSFB) services. If
the random number generated by a UE is less than the parameter value,
NO
the eNodeB accepts the CSFB service access request; otherwise, the
eNodeB rejects the access request.

Indicates the average access barring time of CS fallback (CSFB)

NO
services.
Indicates whether CS fallback (CSFB) services initiated by UEs of AC 11
to AC 15 are granted access.
AC11BARSTATE: If this option is selected, the CSFB services initiated
by UEs of AC 11 in idle mode are barred.
AC12BARSTATE: If this option is selected, the CSFB services initiated
by UEs of AC 12 in idle mode are barred.
NO
AC13BARSTATE: If this option is selected, the CSFB services initiated
by UEs of AC 13 in idle mode are barred.
AC14BARSTATE: If this option is selected, the CSFB services initiated
by UEs of AC 14 in idle mode are barred.
AC15BARSTATE: If this option is selected, the CSFB services initiated
by UEs of AC 15 in idle mode are barred.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates whether the cell is barred. If the cell is barred, the UE cannot
camp on the serving cell. During cell reselection, the serving cell is not NO
selected as a candidate cell.

Indicates whether the cell can initiate the intra-frequency cell reselection
when the cell is barred.
NOT_ALLOWED means that the UE cannot initiate the intra-frequency NO
cell reselection, and ALLOWED means that the UE can initiate the intra-
frequency cell reselection.

Indicates the public land mobile network (PLMN) broadcast mode of the
cell. If certain cells on the live network are in RAN sharing with common
carriers mode or in hybrid RAN sharing mode and at least one of these
cells uses the round robin mode, NBSLTEPLMNRoundSwitch under the
RanSharingAnrSwitch parameter must be selected for eNodeBs whose
cells are configured as neighboring cells for the local cell. Otherwise, the
NO
local eNodeB may experience failures in handing over UEs from the
local cell to an ANR-established neighboring cell that is in round robin
mode. If this parameter is set to NORMAL_MODE, the cell does not
broadcast PLMN-specific information in round robin mode. If this
parameter is set to RR_MODE, the cell broadcasts PLMN-specific
information in round robin mode.

Indicates the changing period of cell PLMN. NO

Indicates the start time for broadcasting PLMN-specific information in
NO
round robin mode.

Indicates whether all synchronization procedures repeatedly initiated by

a UE having compatibility problems can trigger the RRC connection
reconfiguration procedure. If this parameter is set to CFG, all
synchronization procedures repeatedly initiated by a UE having
NO
compatibility problems do not trigger the RRC connection reconfiguration
procedure. If this parameter is set to NOT_CFG, all synchronization
procedures repeatedly initiated by a UE having compatibility problems
trigger the RRC connection reconfiguration procedure.

Indicates the period during which synchronization procedures repeatedly

initiated by a UE having compatibility problems do not trigger the RRC
connection reconfiguration procedure. Multiple synchronization
NO
procedures initiated by a UE having compatibility problems within the
period specified by this parameter trigger only one RRC connection
reconfiguration procedure.

Indicates the local ID of the cell. It uniquely identifies a cell within a base
YES
station.

Indicates the local tracking area identity of the cell, which uniquely
identifies an operator's record of tracking area information within a cell.
YES
This parameter is used only in the eNodeB and is different from the
tracking area identity configured in the tracking area list on the MME.
Indicates whether the cell is reserved for operator use.
If this parameter is set to CELL_RESERVED_FOR_OP, the cell is
reserved for operator use. UEs of AC11 or AC15 in their HPLMN or
EHPLMN can consider this cell as a candidate cell for cell selection or
reselection. UEs of AC11 or AC15 outside their HPLMN/EHPLMN and
NO
UEs of AC0-9/AC12-14 consider this cell as a barred cell during cell
selection or reselection.
If this parameter is set to CELL_NOT_RESERVED_FOR_OP, the cell is
not reserved for operator use. All UEs can consider this cell as a
candidate cell for cell selection or reselection.

Indicates the percentage of resource blocks (RBs) occupied by the

operator on the physical uplink shared channel (PUSCH) when radio
access network (RAN) sharing is enabled on the eNodeB and the cell-
level RAN sharing switch is turned on. If the data volume is sufficient, the
percentage of RBs occupied by each operator will reach the preset NO
value. Modifications on this parameter affect the percentage of RBs
occupied by operators on the PUSCH. This parameter takes effect only
in RAN sharing with common carriers mode or in hybrid RAN sharing
mode with more than one CellOp MO being configured.

Indicates the percentage of resource blocks (RBs) occupied by the

operator on the physical downlink shared channel (PDSCH) when RAN
sharing is enabled on the eNodeB and the cell-level RAN sharing switch
is turned on. If the data volume is sufficient, the percentage of RBs
occupied by each operator will reach the preset value. Modifications on NO
this parameter affect the percentage of RBs occupied by operators on
the PDSCH. This parameter takes effect only in RAN sharing with
common carriers mode or in hybrid RAN sharing mode with more than
one CellOp MO being configured.

Indicates the number of MMEs configured for a cell. This parameter

specifies whether to support the TDD/FDD cell configured with dedicated
MME scenario.
When this parameter is set to 0, the TDD/FDD cell configured with
dedicated MME scenario is not supported, and no MME can be
configured for a cell. NO
When this parameter is set to a value between 1 and 4, the TDD/FDD
cell configured with dedicated MME scenario is supported, and the
number of MMEs for a cell can be configured according to the parameter
value. An MME is uniquely specified by the MME group identifier
(MMEGI) and MME code (MMEC).

Indicates the MMEGI of the first MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 1.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.
Indicates the MMEC of the first MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 1.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the MMEGI of the second MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 2.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the MMEC of the second MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 2.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the MMEGI of the third MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 3.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.
Indicates the MMEC of the third MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
greater than or equal to 3.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the MMEGI of the fourth MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
equal to 4.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the MMEC of the fourth MME configured for a cell. This
parameter can be configured only when the MMECfgNum parameter is
equal to 4.
When setting this parameter, ensure that the globally unique MME
identifier (GUMMEI), consisting of the PLMN, MMEGI, and MMEC, must
be unique.
NO
The S1 link between an MME configured for a cell and the eNodeB
supporting the cell must be available, and the GUMMEI of the MME must
be specified in the ServedGummeis parameter of the S1Interface MO.
Otherwise, the cell cannot broadcast the PLMN in system information.
If all MMEs configured for a cell cannot establish S1 links to the eNodeB
supporting the cell, the cell cannot be established.

Indicates the percentage of activated UEs served by the operator in a

cell when inter-frequency load balancing and RAN sharing are enabled.
NO
Modifications on this parameter affect the percentage of activated UEs
served by operators.

Indicates the operator index that is broadcast in the cell system

NO
information.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the hysteresis for cell reselection when RSRP values are used
in the evaluation. This parameter must be set based on the slow fading
characteristic of the area covered by the cell. The greater the slow fading
NO
variance is, the larger the value of this parameter must be set to. A larger
value of the hysteresis results in a larger boundary of the serving cell
and a higher probability of cell reselection to neighboring cells.

Indicates whether to set the parameters related to speed-dependent cell

NO
reselection.

Indicates the duration in which the mobility status of the UE is evaluated.

This parameter is one of the key parameters in deciding on the UE
mobility. A smaller value of this parameter may lead to more frequent NO
switching among mobility status and lower decision accuracy. A larger
value of this parameter leads to the opposite effect.
Indicates the extra duration required in the evaluation before the UE can
enter the normal-mobility state. This parameter can prevent UEs from
frequently switching from the high- or medium-mobility state to the
normal-mobility state, and is one of the key parameters in deciding on
NO
the UE mobility. A larger value of this parameter leads to a lower
probability of transition from the high- or medium-mobility state to the
normal-mobility state but higher decision accuracy. A smaller value of this
parameter leads to the opposite effect.

Indicates the threshold of the number of cell reselections, which is used

for a UE to enter the medium mobility state. This parameter is one of the
key parameters in determining the mobility state of the UE. During the
NO
UE mobility evaluation, if the number of cell reselections is greater than
this parameter value and is less than or equal to the NCellChangeHigh
parameter value, the UE enters the medium mobility state.
Indicates the threshold of the number of cell reselections, which is used
for a UE to enter the high mobility state. This parameter is one of the key
parameters in determining the mobility state of the UE. During the UE NO
mobility evaluation, if the number of cell reselections is greater than this
parameter value, the UE enters the high mobility state.

Indicates the scaling factor (or known as additional hysteresis) applied to

Qhyst for medium-mobility UEs. For details, see 3GPP TS 36.304 and NO
3GPP TS 36.331.

Indicates the scaling factor (or known as additional hysteresis) applied to

Qhyst for high-mobility UEs. For details, see 3GPP TS 36.304 and 3GPP NO
TS 36.331.
Indicates whether to set the measurement triggering threshold for
reselection to inter-frequency or inter-RAT cells. If this parameter is set to
NO
NOT_CFG, the UE continuously measures intra-frequency or inter-RAT
cells, irrespective of the signal quality of the serving cell.

Indicates the measurement triggering threshold for reselection to inter-

frequency or inter-RAT cells. If the cell reselection priority of a frequency
or RAT is higher than that of the serving frequency, the UEs always start
inter-frequency or inter-RAT measurements. If the cell reselection priority
of a frequency is lower than or equal to that of the serving frequency or if NO
the cell reselection priority of an RAT is lower than that of the serving
frequency, the UEs start inter-frequency or inter-RAT measurements only
when the value of Cell selection RX level value (dB) is lower than or
equal to the value of this parameter.

Indicates the threshold used in the evaluation of reselection to a cell on a

lower priority E-UTRAN frequency or on an inter-RAT frequency. Cell
reselection to a cell on a lower priority E-UTRAN frequency or on an
NO
inter-RAT frequency is performed if no cell on the serving frequency or
on a higher priority E-UTRAN frequency fulfills criteria 1 for inter-
frequency and inter-RAT reselections. For details, see 3GPP TS 36.304.

Indicates the cell reselection priority of the serving frequency. 0 indicates

the lowest priority. The value of this parameter must be determined
together with the priorities of other frequencies during the network NO
planning. Frequencies used for different RATs must be assigned different
cell reselection priorities.
Indicates the minimum required RX level used in intra-frequency E-
UTRAN cell reselection, which corresponds to the IE q-RxLevMin in
NO
SIB3. This value is included in the cell reselection criteria and used in the
evaluation of cell reselection. For details, see 3GPP TS 36.304.

Indicates whether to configure the maximum TX power of the UE in the

intra-frequency neighboring cell. If the value of this parameter is not NO
specified, the maximum power is subject to the UE capability.

Indicates the maximum power that the UE can apply to transmission in

the intra-frequency neighboring cell. It is used in cell reselection criteria
to calculate the compensated power. If the value of this parameter is not NO
specified, the maximum power is subject to the UE capability. For details,
see 3GPP TS 36.304.

Indicates whether to set the measurement triggering threshold for

NO
reselection to intra-frequency cells.
Indicates the measurement triggering threshold for reselection to intra-
frequency cells.
The UEs start intra-frequency measurements only if the value of Cell NO
selection RX level value (dB) is lower than or equal to the value of this
parameter.

Indicates whether to set the measurement bandwidth. NO

Indicates the measurement bandwidth on the serving frequency on

which the UE camps. It is used in intra-frequency measurements for cell
reselection and those by UEs in RRC_CONNECTED mode. This NO
parameter is optional; if it is not set, the downlink bandwidth of the
serving cell is used by default.

Indicates the evaluation period for a UE to determine whether to perform

cell reselections to a new E-UTRAN cell. If the signal quality of a new E-
UTRAN cell is better than that of the serving cell within the period NO
specified by this parameter and a UE camps on the serving cell for more
than 1s, the UE initiates cell reselections to the new E-UTRAN cell.

Indicates whether to set the scaling parameters for speed-dependent cell

NO
reselection within E-UTRAN.
Indicates the scaling factor applied to TReselEutra for medium-mobility
UEs. The actual duration of cell reselection for medium-mobility UEs to
NO
E-UTRAN is equal to the product of TReselEutra and
TReselEutranSfMedium.

Indicates the scaling factor applied to TReselEutran for high-mobility

UEs. The actual duration of cell reselection of high-mobility UEs to E- NO
UTRAN is equal to TReselEutran multiplied by TReselEutranSfHigh.

Indicates the information related to MBSFN and TDD UL/DL

configurations of intra-frequency neighboring cells of the serving cell.
The value 00 indicates that some neighboring cells have the same
MBSFN subframe configuration as the serving cell.
The value 01 indicates that none of the neighboring cells is configured
with MBSFN subframes. NO
The value 10 indicates that the MBSFN subframe configurations of all
neighboring cells are the same as or subsets of that of the serving cell.
The value 11 indicates that some neighboring cells have different UL-DL
configurations from the serving TDD cell.
For details, see 3GPP TS 36.331.

Indicates whether all the intra-frequency neighboring cells are configured

with at least two antenna ports.
Set this parameter to BOOLEAN_TRUE when all the intra-frequency
NO
neighboring cells are configured with at least two antenna ports.
Set this parameter to BOOLEAN_FALSE when one of the intra-
frequency neighboring cells is configured with only one antenna port.
Indicates the RSRQ threshold for starting intra-frequency
measurements. It determines the probability of triggering cell reselection NO
to an intra-frequency neighboring cell. For details, see 3GPP TS 36.304.

Indicates the RSRQ threshold for starting inter-frequency or inter-RAT

measurements. It determines the probability of triggering cell reselection
NO
to an inter-frequency or inter-RAT neighboring cell. For details, see
3GPP TS 36.304.

Indicates whether to set the RSRQ threshold for reselection to cells on

NO
the serving frequency.

Indicates the RSRQ threshold for cell reselection to cells on lower-priority

frequencies. It determines the probability of triggering cell reselection to
NO
inter-frequency or inter-RAT neighboring cells on lower-priority
frequencies. For details, see 3GPP TS 36.304.
Indicates whether to set cell reselection parameters in compliance with
NO
3GPP Release 9 in SIB3.

Indicates the minimum required RX signal quality used in intra-frequency

E-UTRAN cell reselection, which corresponds to the IE q-QualMin in
NO
SIB3. This value is included in criteria R and used in the evaluation of
cell reselection. For details, see 3GPP TS 36.304.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates whether to configure the CDMA2000 system time information.
NO
For details, see 3GPP TS 36.331.

Indicates the network synchronization status. If this parameter is set to

BOOLEAN_TRUE, the E-UTRAN and the CDMA2000 RAN are
synchronized without drifts. If this parameter is set to NO
BOOLEAN_FALSE, the E-UTRAN and the CDMA2000 RAN are not
synchronized. For details, see 3GPP TS 36.331.

Indicates whether to set the search window size. For details, see 3GPP
NO
TS 36.331.

Indicates the size of the CDMA2000 search window, and can be used to
assist in searching for the neighboring pilots. For details, see 3GPP TS NO
36.331.
Indicates whether the eNodeB contains the information about
CDMA2000 HRPD in SIB8. If this parameter is set to CFG, the eNodeB
contains the parametersHRPD field in SIB8. If this parameter is set to NO
NOT_CFG, the eNodeB does not contain the parametersHRPD field in
SIB8. For details, see 3GPP TS 36.331.

Indicates whether to set the parameters related to cell reselection to

NO
CDMA2000 HRPD.

Indicates the evaluation period for a UE to determine whether to reselect

a neighboring CDMA2000 HRPD cell to camp on. During the evaluation
period, if the signal quality in a neighboring CDMA2000 HRPD cell is
better than that in the serving cell and a UE camps on the serving cell for NO
more than 1s, the UE attempts to reselect the neighboring CDMA2000
HRPD cell to camp on. For details about this parameter, see 3GPP TS
36.331.
Indicates whether to set the speed-dependent scaling parameters
related to cell reselection to CDMA2000 HRPD. For details, see 3GPP NO
TS 36.331.

Indicates the scaling factor applied to TReselCdmaHrpd for high-mobility

UEs. The actual duration of cell reselection of high-mobility UEs to
NO
CDMA2000 HRPD is equal to TReselCdmaHrpd multiplied by
TReselCdmaHrpdSfHigh. For details, see 3GPP TS 36.331.
Indicates the scaling factor applied to TReselCdmaHrpd for medium-
mobility UEs. The actual duration of cell reselection of medium-mobility
NO
UEs to CDMA2000 HRPD is equal to TReselCdmaHrpd multiplied by
TReselCdmaHrpdSfMedium. For details, see 3GPP TS 36.331.

Indicates whether the eNodeB contains the information about

CDMA2000 1xRTT in SIB8. If this parameter is set to CFG, the eNodeB
contains the parameters1xRTT field in SIB8. If this parameter is set to NO
NOT_CFG, the eNodeB does not contain the parameters1xRTT field in
SIB8. For details, see 3GPP TS 36.331.

Indicates whether the information element (IE) longCodeState1XRTT is

contained in system information message 8 (SIB8). When this parameter
is set to CFG(Configure), the IE longCodeState1XRTT is contained in
SIB 8. When this parameter is set to NOT_CFG(Not configure), the IE NO
longCodeState1XRTT is not contained in SIB 8. The CDMA2000 1xRTT-
specific long code state is automatically generated based on system
time. For details, see 3GPP TS 36.331.
Indicates whether the parameters applicable only for cell reselection to
NO
CDMA2000 1xRTT need to be set.

Indicates the evaluation period for a UE to determine whether to reselect

a neighboring CDMA2000 1xRTT cell to camp on. During the evaluation
period, if the signal quality in a neighboring CDMA2000 1xRTT cell is
better than that in the serving cell and a UE camps on the serving cell for NO
more than 1s, the UE attempts to reselect the neighboring CDMA2000
1xRTT cell to camp on. For details about this parameter, see 3GPP TS
36.331.

Indicates whether speed-dependent scaling parameters need to be set

NO
for cell reselection to CDMA2000 1xRTT.
Indicates the scaling factor applicable to cell reselection of medium-
NO
mobility UEs to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.

Indicates the scaling factor applicable to cell reselection of high-mobility

NO
UEs to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.

Indicates whether to configure the network capability of dual-receiver

enhanced circuit switched fallback (CSFB). For details, see 3GPP TS NO
36.331.
Indicates whether the network supports dual-receiver enhanced circuit
switched fallback (CSFB) to CDMA2000 1xRTT. If this parameter is set
NO
to BOOLEAN_TRUE, the network supports dual-receiver enhanced
CSFB to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the evaluation period for a UE to determine whether to reselect

a neighboring GERAN cell to camp on. During the evaluation period, if
the signal quality in a neighboring GERAN cell is better than that in the NO
serving cell and a UE camps on the serving cell for more than 1s, the UE
attempts to reselect the neighboring GERAN cell to camp on.

Indicates whether to set the speed-dependent scaling parameters

NO
related to cell reselection to GERAN.
Indicates the scaling factor applied to TReselGeran for medium-mobility
UEs. The actual duration of cell reselection of medium-mobility UEs to NO
GERAN is equal to TReselGeran multiplied by TReselGeranSfMedium.

Indicates the scaling factor applied to TReselGeran for high-mobility

UEs. The actual duration of cell reselection of high-mobility UEs to NO
GERAN is equal to TReselGeran multiplied by TReselGeranSfHigh.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the evaluation period for a UE to determine whether to reselect

a neighboring UTRAN cell to camp on. During the evaluation period, if
the signal quality in a neighboring UTRAN cell is better than that in the NO
serving cell and a UE camps on the serving cell for more than 1s, the UE
attempts to reselect the neighboring UTRAN cell to camp on.

Indicates whether to set the speed-dependent scaling parameters

NO
related to cell reselection to UTRAN.
Indicates the scaling factor applied to TReselUtran for medium-mobility
UEs. The actual duration of cell reselection of medium-mobility UEs to
UTRAN is equal to TReselUtran multiplied by TReselUtranSfMedium. NO
The value T_RESEL_SF_0DOT25 means a scaling factor of 0.25,
T_RESEL_SF_0DOT5 means 0.5, and so on.

Indicates the scaling factor applied to TReselUtran for high-mobility UEs.

The actual duration of cell reselection of high-mobility UEs to UTRAN is
equal to TReselUtran multiplied by TReselUtranSfHigh. NO
The value T_RESEL_SF_0DOT25 means a scaling factor of 0.25,
T_RESEL_SF_0DOT5 means 0.5, and so on.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the minimum required RX level for the cell to become a

candidate for cell selection. This value is included in criteria S and used NO
in the evaluation of cell selection. For details, see 3GPP TS 36.304.
Indicates the offset to the minimum required RX level. This value is
included in criteria S and used in the evaluation of cell selection. This
parameter is valid only when the cell selection is triggered by periodic NO
searches for higher-priority PLMNs and the UE is served by a Visited
Public Land Mobile Network (VPLMN). For details, see 3GPP TS 36.304.

Indicates the minimum required RX signal quality for the cell to become
a candidate for cell selection, which corresponds to the IE q-QualMin in
NO
SIB1. This value is included in criteria S and used in the evaluation of
cell selection. For details, see 3GPP TS 36.304.

Indicates whether to set the offset to the minimum required RX level for
NO
the cell.
Indicates the offset to the minimum required RX level for the cell. It is
included in criteria S and used in the evaluation of cell selection. This
parameter is required only when the cell selection is triggered by periodic NO
searches for higher-priority PLMNs and the UE is served by a Visited
Public Land Mobile Network (VPLMN). For details, see 3GPP TS 36.304.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates whether the mapping from SIBs to SI messages is enabled. If it

is disabled, a fixed configuration is used for the mapping from SIBs to SI
messages and the SI window size. If it is enabled, the mapping from NO
SIBs to SI messages and the SI window size are determined based on
the transmission period, quantity, and data traffic of SIBs.

Indicates the transmission period for system information block type 2

NO
(SIB2). For details, see 3GPP TS 36.331.
Indicates the transmission period for system information block type 3
NO
(SIB3). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 4

NO
(SIB4). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 5

NO
(SIB5). For details, see 3GPP TS 36.331.
Indicates the transmission period for system information block type 6
NO
(SIB6). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 7

NO
(SIB7). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 8

NO
(SIB8). For details, see 3GPP TS 36.331.
Indicates the transmission period for system information block type 10
NO
(SIB10). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 11

NO
(SIB11). For details, see 3GPP TS 36.331.

Indicates the duration of the primary notification (PN) broadcast for the
NO
Earthquake and Tsunami Warning System (ETWS).

Indicates the policy of processing repeated secondary notification (SN)

broadcast for the Earthquake and Tsunami Warning System (ETWS). A
repeated SN is a second SN that has the same IEs Message Identifier
and Serial Number as those in the first SN. The value MERGE indicates NO
that the cell stops broadcasting the first SN and then broadcasts the
second SN. The value DISCARD indicates that the cell ignores the
second SN and continues broadcasting the first SN.

Indicates the policy of processing repeated primary notification (PN)

broadcast for the Earthquake and Tsunami Warning System (ETWS). A
repeated PN is a second PN that has the same Message Identifier and
Serial Number IEs as those in the first PN. If this parameter is set to
NO
MERGE, the eNodeB stops broadcasting the first PN and starts
broadcasting the second PN. If this parameter is set to DISCARD, the
eNodeB discards the second PN and continues broadcasting the first
PN.
Indicates the transmission period for system information block type 12
NO
(SIB12). For details, see 3GPP TS 36.331.

Indicates the code rate of system information transmission. For details

NO
about this parameter, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 13

NO
(SIB13). For details, see 3GPP TS 36.331.
Indicates the transmission period for system information block type 15
NO
(SIB15). For details, see 3GPP TS 36.331.

Indicates the transmission period for system information block type 16

NO
(SIB16). For details, see 3GPP TS 36.331.

Indicates whether the eNodeB uses a new mechanism to send system

information block (SIB) messages. The eNodeB uses the new
mechanism to send SIB messages only when this parameter is set to NO
ON. In this case, the probability of SIB retransmissions decreases and
therefore fewer PDCCH resources are consumed.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the compensation factor for path loss. It is used in UL power
NO
control. For details, see 3GPP TS 36.213.

Indicates the target UE transmit power for the PUCCH expected by the
eNodeB on condition that normal demodulation can be performed. For NO
details, see 3GPP TS 36.213.
Indicates the nominal P0 value of the PUSCH. It is used in UL power
NO
control. For details, see 3GPP TS 36.213.

Indicates the Delta value corresponding to PUCCH format 1. For details,

NO
see 3GPP TS 36.213.

Indicates the Delta value corresponding to PUCCH format 1b. For

NO
details, see 3GPP TS 36.213.
Indicates the Delta value corresponding to PUCCH format 2. For details,
NO
see 3GPP TS 36.213.

Indicates the Delta value corresponding to PUCCH format 2a. For

NO
details, see 3GPP TS 36.213.

Indicates the Delta value corresponding to PUCCH format 2b. For

NO
details, see 3GPP TS 36.213.
Indicates the power offset (delta value) of message 3 relative to the
preamble. This power offset has a step size of 2. For details, see 3GPP NO
TS 36.213.

Indicates the power offset of Msg3 transmitted during uplink random

access. This parameter is also used to set the initial power of the
NO
PUSCH or PUCCH for closed-loop power control. This parameter is
dedicated to LTE TDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the local tracking area identity of the cell, which uniquely
identifies an operator's record of tracking area information within a cell.
YES
This parameter is used only in the eNodeB and is different from the TAI
configured in the TAL on the MME.
Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the ID of the primary baseband equipment that serves a cell.

If the primary baseband equipment is not configured for a cell, the
eNodeB selects baseband processing units for the cell among all
baseband processing units that have not been bound to cells. NO
If this parameter is normally configured, the cell uses specified primary
baseband equipment. In this case, the cell can use only the baseband
processing units included in the primary baseband equipment.
Indicates the local cell identity. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the ID of the sector device that serves the cell,it uniquely
YES
identifies a sector device within an eNodeB.

Indicates the reference signal power of the cell sector device. The value
32767 indicates that this reference signal power parameter is invalid. In
this case, the reference signal power of the cell equals the value of the
NO
PDSCHCFG parameter. For details, see 3GPP TS 36.213.This
parameter is valid only when a multi-RRU cell works in
SFN,MPRU_AGGREGATION or cell combination mode.

Indicates the ID of the baseband equipment serving a cell.

When this parameter is set to 255, the baseband equipment serving a
cell is not specified. In this scenario, the LTE baseband processing units
(LBBPs) serving a cell are selected among all LBBPs in the eNodeB,
and the LBBPs to which the cell's serving RRU is connected are NO
preferentially selected.
When this parameter is set to a value other than 255, the cell is served
by LBBPs in the specified baseband equipment, and the LBBPs to which
the cell's serving RRU is connected are preferentially selected.

Indicates the cabinet number of the RRU. NO

Indicates the subrack number of the RRU. NO

Indicates the slot number of the RRU. NO

Indicates the received total wideband power (RTWP) for the carrier. The
normal value range is from -110 dBm to -40 dBm. The RRU cannot work NO
properly if the value is out of range.

Indicates the RX channel number of the RRU. An RRU is configured with

NO
multiple RX channels.
Indicates the reference signal power headroom for the sector device
serving the cell. This parameter takes effect only when the
MultiRruCellFlag parameter is set to BOOLEAN_TRUE and the
MultiRruCellMode parameter is set to SFN or CELL_COMBINATION.
If this parameter is set to 0, the reference signal power headroom for the
sector device serving the cell is subject to the power headroom NO
configured in the PDSCHCFG MO rather than the parameter setting. If
this parameter is set to a non-zero value, the reference signal power
headroom for the sector device serving the cell is subject to the
parameter setting rather than the power headroom configured in the
PDSCHCFG MO. This parameter applies only to LTE TDD cells.

Indicates the common public radio interface (CPRI) compression type for
the sector equipment. CPRI compression is used in RRU cascading
scenarios to enable more RRUs to be cascaded without changing the
CPRI data rate. The parameter value NO_COMPRESSION indicates
that CPRI compression is not used. The parameter value
NORMAL_COMPRESSION indicates that CPRI compression is used.
The parameter value ENHANCED_COMPRESSION indicates that
enhanced CPRI compression is used. The parameter value NULL
indicates that this parameter is invalid. The performance of enhanced
CPRI compression is better than the performance of normal CPRI
compression. If the eNodeB is equipped with LBBPd boards and the
CPRI data rate is 9.8 Gbit/s for LTE FDD cells or the CPRI data rate is
greater than 4.9 Gbit/s for LTE TDD cells, the CPRI compression type of NO
cells served by RRUs in the same RRU chain or ring must be the same.
Before changing the value of this parameter for a cell served RRUs in
the same RRU chain or ring, ensure that all cells served by the RRU
chain or ring are deactivated. Activate the cells after you change the
parameter value.
This parameter is used only when MultiRruCellMode is set to SFN or
CELL_COMBINATION. This parameter can be set based on the sector
equipment. When this parameter is set to NULL, the CPRI compression
type of carriers depends on the value of the CPRICompression
parameter in the Cell MO. When this parameter is set to any other value,
the sector CPRI compression type of carriers depends on the value of
the SectorCpriCompression parameter in the eUCellSectorEqm MO.

Indicates the ID of the eNodeB. NO

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the group ID of the sector devices that serve the cell,it uniquely
YES
identifies a group of sector devices within a cell.
Indicates the list of the sector devices that serve the cell. NO

Indicates the ID of the sector device that serves the cell. YES

Indicates the ID of the baseband equipment serving a cell.

When this parameter is set to 255, the baseband equipment serving a
cell is not specified. In this scenario, the LTE baseband processing units
(LBBPs) serving a cell are selected among all LBBPs in the eNodeB,
and the LBBPs to which the cell's serving RRU is connected are NO
preferentially selected.
When this parameter is set to a value other than 255, the cell is served
by LBBPs in the specified baseband equipment, and the LBBPs to which
the cell's serving RRU is connected are preferentially selected.

Indicates the reference signal power of a sector equipment group for a

cell (all sets of sector equipment in the sector equipment group have the
same reference signal power). If this parameter is set to 32767, the
parameter value is invalid, and the cell uses the reference signal power
specified by the ReferenceSignalPwr parameter in the PDSCHCFG MO. NO
For details, see 3GPP TS 36.213. This parameter takes effect only when
parameter MultiRruCellFlag is set to BOOLEAN_TRUE and
MultiRruCellMode is set to MPRU_AGGREGATION or FDD SFN,
respectively.
Indicates the common public radio interface (CPRI) compression type for
the sector equipment group. CPRI compression is used in RRU
cascading scenarios to enable more RRUs to be cascaded without
changing the CPRI data rate. The parameter value NO_COMPRESSION
indicates that CPRI compression is not used. The parameter value
NORMAL_COMPRESSION indicates that CPRI compression is used.
The parameter value ENHANCED_COMPRESSION indicates that
enhanced CPRI compression is used. The parameter value NULL
indicates that this parameter is invalid. The performance of enhanced
CPRI compression is better than the performance of normal CPRI
compression. If the eNodeB is equipped with LBBPd boards and the
CPRI data rate is 9.8 Gbit/s for LTE FDD cells or the CPRI data rate is
greater than 4.9 Gbit/s for LTE TDD cells, the CPRI compression type of
cells served by RRUs in the same RRU chain or ring must be the same. NO
If this parameter value is changed, the cell served by the sector
equipment group automatically resets.
This parameter is used only when MultiRruCellMode is set to SFN or
CELL_COMBINATION. This parameter can be set based on the sector
equipment group. When this parameter is set to NULL, the CPRI
compression type of carriers depends on the value of the
CPRICompression parameter in the Cell MO. When this parameter is set
to any other value, the sector equipment group CPRI compression type
of carriers depends on the value of the SectorCpriCompression
parameter in the eUCellSectorEqm MO. Before changing the value of
this parameter for a cell served RRUs in the same RRU chain or ring,
ensure that all cells served by the RRU chain or ring are deactivated.
Activate the cells after you change the parameter value.

Indicates the local cell identity of the cell. It uniquely identifies a cell
YES
within an eNodeB.

Indicates the ID of the eNodeB to which the RRU/RFU connected. NO

Indicates the cabinet number of the RRU/RFU. NO

Indicates the subrack number of the RRU/RFU. NO

Indicates the slot number of the RRU/RFU. NO

Indicates the number of BBP data links. NO

Indicates the BBP data link ID. NO

Indicates the status of the BBP data link. NO

Indicates the open DU interface (ODI) ID. NO

Indicates the input port number of the BBP data link. NO

Indicates the output port number of the BBP data link. NO

Indicates the loopback delay on the BBP data link. NO

Indicates the number of loopback timeouts on the BBP data link. NO

Indicates the cabinet number of the board involved in data link

NO
transmission.

Indicates the subrack number of the board involved in data link

NO
transmission.

Indicates the slot number of the board involved in data link transmission. NO

Indicates the type of the BBP data link. The parameter value
BIDIRECTIONAL indicates that a data link is bidirectional, that is, the
BBP data can be transmitted between the input port of the BBP data link
(source port) and the output port of the BBP data link (target port). The
parameter value FORWARD_DIRECTION indicates that the BBP data
NO
can be transmitted only from the input port of the BBP data link (source
port) to the output port of the BBP data link (target port). The parameter
value BACKWARD_DIRECTION indicates that the BBP data can be
transmitted only from the input port of the BBP data link (target port) to
the output port of the BBP data link (source port).
Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the length of the uplink time alignment timer for UEs in the cell.
NO
A UE is considered not time-aligned in the uplink if the timer expires.
Indicates whether optimization of the mechanism for delivering the uplink
time alignment command takes effect. If the optimization takes effect, the
number of unnecessary uplink time alignment commands delivered to
motionless or low-mobility UEs can be reduced to save air interface
resources and reduce power consumption of UEs in DRX mode. This
ensures the uplink time alignment performance if the length of the uplink
time alignment timer is set to a large value.
If this parameter is set to ON, it is recommended that the NO
TimeAlignmentTimer parameter be set to SF10240. A smaller value of
the TimeAlignmentTimer parameter, such as SF5120, leads to a higher
probability of becoming out-of-synchronization in the uplink for UEs in
DRX mode.
If this parameter is set to ON, it is recommended that the LongDrxCycle
parameter be smaller than or equal to SF320. Otherwise, the uplink time
alignment performance of UEs in DRX mode is affected.
Indicates the method of measuring uplink timing offsets. If this parameter
is set to INVALID, uplink timing offsets are measured based on the
demodulation reference signal (DMRS) for PUSCH or sounding
reference signal (SRS). If this parameter is set to ALLMEASMODE,
uplink timing offsets are measured based on the DMRS for PUSCH and
SRS or based on the DMRS for PUSCH and channel quality indicator
(CQI) in PUCCH. In addition, the value ON of the
TimingAdvCmdOptSwitch parameter takes effect regardless of the actual
parameter setting. That is, the eNodeB always sends the Timing
NO
Advance Command to UEs. In this case, it is recommended that the
TimeAlignmentTimer parameter be set to SF10240. The value
ALLMEASMODE applies only to LTE FDD cells. The parameter value
INVALID takes effect in a cell regardless of the actual parameter setting
in any of the following scenarios: (1) The cell is established on an
LBBPc. (2) The UlCyclicPrefix parameter is set to EXTENDED_CP. (3)
The HighSpeedFlag parameter is set to HIGH_SPEED,
ULTRA_HIGH_SPEED, or EXTRA_HIGH_SPEED. (4) The TX/RX mode
of the cell is 2T8R.
Indicates the interval for sending the Timing Advance Command to UEs.
This parameter needs to be set only when the TimingAdvCmdOptSwitch
NO
parameter is set to ON. If this parameter is set to Invalid, none of
parameter settings in the MML Command window takes effect.
Indicates whether to enable the mechanism of optimized resource
scheduling for uplink timing.If this parameter is set to OFF, the eNodeB
adopts the existing resource scheduling policy for uplink timing, which
consumes a large amount of resources used for delivering Timing
Advance Commands in large traffic scenarios.If this parameter is set to
ON, the eNodeB adopts the mechanism of optimized resource NO
scheduling for uplink timing, which reduces the number of unnecessary
Timing Advance Commands to be delivered and reduces resources
allocated for uplink timing in large traffic scenarios.This parameter
applies only to LTE FDD cells. The parameter value ON is recommended
in heavily loaded cells where there is a large number of UEs.
Indicates the offset compensation of the timing advance on the
PUCCH.Time Offset compensation on the PUCCH is not enabled for NO
cells established on an LBBPc.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the timer value of Timer 300. For details, see 3GPP TS 36.331.
This timer is started when the UE sends RRCConnectionRequest.
Before the timer expires, it is stopped if the UE receives NO
RRCConnectionSetup or RRCConnectionReject.
After the timer expires, the UE enters the RRC_IDLE state.
Indicates the length of timer 301. For details, see 3GPP TS 36.331.
This timer is started when the UE sends an RRC Connection
Reestablishment Request message.
The timer is stopped if, before it expires, the UE receives an RRC
Connection Reestablishment or RRC Connection Reestablishment NO
Reject message. The timer is also stopped if the selected cell becomes
an unsuitable cell. For the definition of a suitable cell, see 3GPP TS
36.331.
After the timer expires, the UE enters the RRC_IDLE mode.

Indicates the length of timer 310. For details, see 3GPP TS 36.331.
This timer is started when the UE detects any fault at the physical layer.
The timer is stopped if the UE detects one of the following before the
timer expires: (1) The physical-layer fault is rectified; (2) A handover is
triggered; (3) The UE initiates an RRC connection reestablishment NO
procedure.
After the timer expires, the UE enters the RRC_IDLE mode if the security
mode is not activated. If the security mode is activated, the UE initiates
an RRC connection reestablishment procedure.

Indicates the length of timer 311. For details, see 3GPP TS 36.331.
This timer is started when the UE starts the RRC connection
reestablishment procedure.
NO
The timer is stopped if, before the timer expires, the UE selects an E-
UTRAN or inter-RAT cell to camp on.
After the timer expires, the UE enters the RRC_IDLE mode.

Indicates the maximum number of successive "in sync" indications

NO
received from L1. For details, see 3GPP TS 36.331.

Indicates the maximum number of successive "out of sync" indications

NO
received from L1. For details, see 3GPP TS 36.331.
Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the name of the cell. NO

Indicates whether the cell is a closed subscriber group (CSG) cell. A

CSG cell has restrictions on UE access. It broadcasts a specific CSG ID
in the SIB and only those UEs of the group can access the CSG cell.
NO
BOOLEAN_FALSE indicates that the cell is not a CSG cell, and
BOOLEAN_TRUE indicates that the cell is a CSG cell. Currently, Huawei
eNodeBs do not support CSG cells.
Indicates the UL cyclic prefix length of a cell. A cyclic prefix can be a
common or extended cyclic prefix. An extended cyclic prefix is generally
used in a complex environment with a strong multi-path effect and long
delay. In a cell, the UL cyclic prefix length can be different from the DL NO
one. In addition, the UL or DL cyclic prefix length of a cell must be the
same as that of the cell using the same BBP. For details, see 3GPP TS
36.211.
Indicates the length of the DL cyclic prefix of a cell. A DL cyclic prefix can
be a common or extended cyclic prefix. An extended cyclic prefix is
generally used in a complex environment with a strong multi-path effect
and long delay. In a cell, the UL cyclic prefix length can be different from NO
the DL one. In addition, the UL or DL cyclic prefix length of a cell must be
the same as that of the cell using the same BBP. For details, see 3GPP
TS 36.211.
Indicates the frequency band in which the cell operates. For details
NO
about this parameter, see 3GPP TS 36.104.

Indicates whether to configure the uplink EARFCN of the cell. NO

Indicates the UL EARFCN of the cell. It is optional, depending on the
setting of the UL EARFCN configuration indicator (UlEarfcnCfgInd). If the
value of this parameter is not specified, the default UL EARFCN is used, NO
which is calculated based on the DL EARFCN. For details, see 3GPP TS
36.104.

Indicates the DL EARFCN of the cell. For details, see the 3GPP TS
NO
36.104.
Indicates the UL bandwidth of the cell, which is based on the number of
resource blocks (RBs). The value CELL_BW_N25 indicates a cell
bandwidth of 25 RBs. The value CELL_BW_N50 indicates a cell
NO
bandwidth of 50 RBs. The mapping between the parameter value and
the actual cell bandwidth (that is, the number of RBs) can be deduced
similarly. For details, see 3GPP TS 36.104.
Indicates the DL bandwidth of the cell, which is based on the number of
resource blocks (RBs). The value CELL_BW_N25 indicates a cell
bandwidth of 25 RBs. The value CELL_BW_N50 indicates a cell
NO
bandwidth of 50 RBs. The mapping between the parameter value and
the actual cell bandwidth (that is, the number of RBs) can be deduced
similarly. For details, see 3GPP TS 36.104.

Indicates the ID of the E-UTRAN cell. The combination of this parameter

and the eNodeB ID forms the E-UTRAN cell identity. The combination of
NO
the E-UTRAN cell identity and the PLMN identity forms the ECGI. For
details, see 3GPP TS 36.413.
Indicates the physical cell ID. For details, see 3GPP TS 36.331. NO

Indicates the additional spectrum emission, which restricts the emission

NO
power of the UEs in the cell. For details, see the 3GPP TS 36.101.
Indicates the active state of the cell. It consists of the activated and
NO
deactivated states.

Indicates the administrative state of the cell. If this parameter is set to

CELL_HIGH_BLOCK, the cell is deactivated immediately. If this
parameter is set to CELL_MIDDLE_BLOCK, new users are not allowed
to access the cell and the cell is deactivated when it has no user to serve
during the period specified by the CellMidBlkTimer parameter, or is NO
deactivated when the timer expires irrespective of whether it has users to
serve. If this parameter is set to CELL_LOW_BLOCK, new users are not
allowed to access the cell and the cell is deactivated only when the cell
has no user to serve.

Indicates the length of the timer used to determine whether to block a

middle-blocking-priority cell. If CellAdminState is set to
CELL_MIDDLE_BLOCK, new users are not allowed to access the cell
NO
and the cell is deactivated when no user accesses the cell during the
period of time specified by this parameter. The cell is also deactivated if
the timer expires.
Indicates the duplex mode of the cell. CELL_FDD indicates the FDD
NO
mode, and CELL_TDD indicates the TDD mode.
Indicates the ratio of UL subframes to DL subframes in a TDD cell. For
NO
details, see 3GPP TS 36.211.
Indicates the ratio of special UL subframes to special DL subframes in a
NO
TDD cell. For details, see 3GPP TS 36.211.
Indicates the cell specific offset for the serving cell. It affects the
probability of triggering handovers from the serving cell to its neighboring
NO
cells. A smaller value of this parameter leads to a higher probability. For
details, see 3GPP TS 36.331.
Indicates the specific frequency offset of the serving cell. This parameter
is contained in the measurement control information and is related to the
NO
handover difficulty between the serving cell and the neighboring cell. For
details, see 3GPP TS 36.331.
Indicates the first logical root sequence, which is used to generate the
preamble sequence. Each logical root sequence corresponds to a
NO
physical root sequence. For the mapping between logical root
sequences and physical root sequences, see 3GPP TS 36.211.
Indicates the speed flag of the cell. Set this parameter to HIGH_SPEED
if the cell is used to provide coverage for an ultra-high-speed railway. Set
this parameter to LOW_SPEED in other scenarios. TDD cells with a NO
bandwidth of 5 MHz or in 8T8R mode can only be configured as low
speed cells. TDD cells don't support ULTRA_HIGH_SPEED mode.
Indicates the preamble format used in the cell. For details, see 3GPP TS
NO
36.211.
Indicates the radius of the cell, that is, the farthest distance that a cell
can cover under the condition of keeping certain network performance. If
this parameter is set to a value greater than 100 km, the Extended Cell NO
Access Radius Beyond 100km feature takes effect. Only FDD cells can
be configured with a radius more than 100 km.
Indicates whether to configure a customized bandwidth for a cell. A
customized bandwidth can be configured only when a standard
NO
bandwidth 1.4 MHz, 5 MHz, 10 MHz, 15 MHz, or 20 MHz has been
configured.
Indicates a customized uplink bandwidth configured for a cell. A
customized bandwidth can be configured only when a standard
NO
bandwidth 1.4 MHz, 5 MHz, 10 MHz, 15 MHz, or 20 MHz has been
configured.
Indicates a customized downlink bandwidth configured for a cell. A
customized bandwidth can be configured only when a standard
NO
bandwidth 1.4 MHz, 5 MHz, 10 MHz, 15 MHz, or 20 MHz has been
configured.

Indicates whether to set an emergency area ID. NO

Indicates the ID of the notification area within which a warning
notification is broadcast. The area consists of one or more cells and can
NO
be customized by operators. For details about this parameter, see 3GPP
TS 36.413.

Indicates whether to configure the maximum TX power of the UE in the

cell. If the value of this parameter is not specified, the maximum power is NO
subject to the UE capability.

Indicates the maximum transmit power that a UE can apply to uplink

transmission in the cell. It is used in cell selection criterion S to calculate
the compensated power. If the value of this parameter is not specified, NO
the maximum power is subject to the UE capability. For details, see
3GPP TS 36.304.
Indicates whether to enable or disable the multi-RRU cell feature. NO
Indicates the type of the multi-RRU cell. NO
Indicates the common public radio interface (CPRI) compression type.
CPRI compression is used in RRU cascading scenarios to enable more
RRUs to be cascaded without changing the CPRI data rate. The
parameter value NO_COMPRESSION indicates that CPRI compression
is not used. The parameter value NORMAL_COMPRESSION indicates
that CPRI compression is used. The parameter value
ENHANCED_COMPRESSION indicates that enhanced CPRI
compression is used. If the eNodeB is equipped with LBBPd boards and
NO
the CPRI data rate is 9.8 Gbit/s for LTE FDD cells or the CPRI data rate
is greater than 4.9 Gbit/s for LTE TDD cells, the CPRI compression type
of cells served by RRUs in the same RRU chain or ring must be the
same. The LBBPc does not support CPRI compression, all LBBP boards
do not support enhanced CPRI compression. Before changing the value
of this parameter for a cell served RRUs in the same RRU chain or ring,
ensure that all cells served by the RRU chain or ring are deactivated.
Activate the cells after you change the parameter value.

Indicates the number of physical cells consisting an SFN cell. In macro

eNodeBs, this parameter value equals the number of sector equipment
sets serving an SFN cell. In LampSite eNodeB, this parameter value
equals the number of sector equipment groups serving an SFN cell. In NO
macro and LampSite eNodeBs, the parameter value equals the sum of
the sector equipment sets and sector equipment groups serving an SFN
cell.
Indicates whether the cell is an air cell. NO
Indicates the number of ports for transmitting cell-specific reference
signal (CRS). As defined in 3GPP specifications, this parameter can be
set to CRS_PORT_1, CRS_PORT_2, or CRS_PORT_4. The value
CRS_PORT_1 indicates that one CRS port (port 0) is configured. The NO
value CRS_PORT_2 indicates that two CRS ports (ports 0 and 1) are
configured. The value CRS_PORT_4 indicates that four CRS ports (ports
0, 1, 2, and 3) are configured.
Indicates the transmission and reception mode of the cell. NO

Indicates the user label of the cell. NO

Indicates the work mode of the cell. The DL_ONLY mode applies only to
NO
the carrier aggregation scenario.

Indicates the active or standby mode of the cell. A cell is in active mode
by default. If this parameter is set to STANDBY, an inter-BBU SFN
auxiliary cell can roll back to the standby mode to provide services if NO
inter-BBU faults occur. Only common cells, SFN cells or
MPRU_AGGREGATION cells support the standby mode.
Indicates the mapping between a cell-specific reference signal (CRS)
port and a transmit (TX) channel in an RRU. In cells with one or two TX
channels, this parameter cannot be set. In cells with four or eight TX
channels, this parameter can be set. As defined in 3GPP specifications,
the CrsPortNum parameter can be set to CRS_PORT_1, CRS_PORT_2,
or CRS_PORT_4. The value CRS_PORT_1 indicates that one CRS port
(port 0) is configured. The value CRS_PORT_2 indicates that two CRS
ports (ports 0 and 1) are configured. The value CRS_PORT_4 indicates
that four CRS ports (ports 0, 1, 2 and 3). In values of this parameter,
mTnP indicates that the number of TX channels configured for a cell is
"m" and the number of CRS ports is "n". The parameter value
4TnP_abcd indicates that reference signals transmitted over CRS ports
a, b, c, and d are mapped to TX channels 1, 2, 3, and 4 in an RRU,
respectively (The TX channel number here is for reference only, and is
determined based on the R0A to R0D, or others). The parameter value
NO
8TnP_abcdefgh indicates that reference signals transmitted over CRS
ports a to h are mapped to TX channels 1 to 8 in an RRU, respectively.
Duplicate numbers of abcd or abcdefgh indicates that virtual antenna
mapping (VAM) is applied, that is, the reference signals transmitted over
the CRS port are mapped to corresponding TX channels. For example,
the parameter value 4T2P_0101 indicates reference signals transmitted
over CRS port 0 are mapped to TX channels 1 and 3 in an RRU, and
reference signals transmitted over CRS port 1 are mapped to TX
channels 2 and 4 in an RRU. The parameter value NOT_CFG indicates
that the mapping between a CRS port and a TX channel in an RRU is
not configured, and CRS ports are mapped to TX channels in an RRU in
a default manner. In TDD cells, "n" in mTnP must be equal to the
CrsPortNum parameter value. For cells established on LBBPc boards,
the parameter value NOT_CFG takes effect regardless of the actual
parameter setting.

Indicates the compression ratio of data transmitted on the CPRI port

over Ethernet for an MPRU aggregation cell. Data compression on the
CPRI port over Ethernet reduces the bandwidth of LTE data on the
Ethernet cable between the RHUB and MPRUs, and therefore the NO
Ethernet cable supports more carriers of different RATs. The parameter
values 2_TO_1,3_TO_1 and 4_TO_1 indicate ratios of 2:1,3:1 and 4:1,
respectively.
Indicates the state of the cell instance. NO

Indicates the reason that causes the latest state change of the cell,
NO
which can be a cell activation success or a cell setup failure.

Indicates the latest setup time of the cell. NO

Indicates the latest setup type of the cell. NO

Indicates the latest remove time of the cell. NO

Indicates the latest remove type of the cell. NO
Indicates the energy conservation and emission reduction mode of the
cell. The energy conservation and emission reduction mode of the cell
can be set to RF intelligent shutdown mode, intelligent power-off of
NO
carriers mode, low power consumption mode, RF module regular time
sleep mode, inter-RAT cell shutdown mode, or dynamic adjust voltage
mode.

Indicates the cabinet number, subrack number and slot number of the
NO
primary BBP that serves the cell.
Indicates the topology of the cell. NO

Indicates the cabinet number of the RF module that serves the cell. NO

Indicates the subrack number of the RF module that serves the cell. NO

Indicates the slot number of the RF module that serves the cell. NO

Indicates whether the cell is in the symbol power saving state. NO

Indicates the maximum transmit power of the cell in theory. The value
65535 indicates that this parameter is invalid, which can be changed by
NO
modifying the physical downlink shared channel (PDSCH) configuration
or the PA parameter related to power control for the PDSCH.

Indicates the ID of the eNodeB. NO

Indicates the cabinet number of the BBP that serves the cell. NO
Indicates the subrack number of the BBP that serves the cell. NO

Indicates the slot number of the BBP that serves the cell. NO

Indicates the work status of the RF module and BBP that serves the cell. NO

Indicates the local cell identity of the uplink coordinating cell. NO

Indicates slave frequency bands of a cell. If the operating frequency of a

cell belongs to multiple frequency bands, the frequency band with the
highest priority is configured by the FreqBand parameter, and frequency
bands with other priorities are configured by the CellSlaveBand
parameter and added in descending order based on frequency band
NO
priorities. The frequency band priorities of a cell are determined in
network planning. It is recommended that the frequency bands
supporting UEs that comply with 3GPP TS 36.331 V8.16.0, 3GPP TS
36.331 V9.1.0, 3GPP TS 36.331 V10.5.0, or a later vision be configured
as slave frequency bands.
Indicates the frequency band in which the cell operates. For details
YES
about this parameter, see 3GPP TS 36.104.

Indicates the ID of the eNodeB operator group that shares the cell. This
parameter must be set to a value within the range of 0 and 5 if the
eNodeB works in hybrid RAN sharing mode. This parameter must be set
NO
to 255 (indicating an invalid value) in independent RAN sharing mode,
RAN sharing with dedicated carriers, or RAN sharing with common
carriers.

Indicates the cabinet, subrack, and slot where the RF module serves the
NO
cell is located.

Indicates the cabinet, subrack, and slot of the baseband processing unit
NO
on which the cell is set up is located.

Indicates the number of cells (each cell is served by one RRU)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by two RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by three RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by four RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by five RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by six RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the number of cells (each cell is served by seven RRUs)

supported by the remaining resources on the primary baseband NO
processing board.

Indicates the quantity of resources occupied by the cell on the primary

baseband processing board. The resource quantity is indicated by the NO
number of RRUs.
Indicates the number of cells for which the adjustment fails in the one-
NO
click manner.

Indicates the number of cells for which the adjustment is successful in

NO
the one-click manner.

Indicates the channel state information (CSI) reference signal

measurement period. This parameter is valid only for LTE TDD cells.
Disuse statement: This parameter will be replaced with the CsiRsPeriod
parameter in the CellCsiRsParaCfg MO in V100R010C00. In this
NO
version, the setting of this parameter is still synchronized between the
U2000 and the eNodeB and can be delivered to the eNodeB, but it is no
longer used internally. Therefore, avoid using this parameter in
interfaces.

Indicates the information about the CPRI port on the baseband

processing board that is directly connected to the RF unit serving a cell.
NO
The information includes the cabinet, subrack, slot, and CPRI port
numbers.

Indicates the TX channel information about the RF unit that serves a cell. NO

Indicates the RX channel information about the RF unit that serves a

NO
cell.

Indicates the IDs of the primary and secondary baseband processing

NO
boards that serve a cell.
Indicates whether an intra-frequency neighboring cell is a shared
neighboring cell. If this parameter is set to BOOLEAN_TRUE, the
serving frequency is a shared frequency, and the shared operator
information must be checked on the OSS before all intra-frequency
NO
neighboring cells are added. If this parameter is set to
BOOLEAN_FALSE, the serving frequency is not a shared frequency, and
the shared operator information does not need to be checked on the
OSS before all intra-frequency neighboring cells are added.

Indicates whether to enable ANR on intra-frequency neighboring cells

and external cells. The value ALLOWED indicates that this type of ANR
NO
is allowed. The value NOT_ALLOWED indicates that this type of ANR is
not allowed.
Indicates whether the DwPTS is truncated for transmission in TDD mode
when SSP6 is used. This parameter applies only to scenarios where a NO
Band39 TDD cell is configured with SA2+SSP6.

Indicates whether a cell is a macro or micro cell. It is recommended that

a cell be configured as a macro cell if its actual maximum transmit power
is greater than or equal to a threshold (for example 10 W) and configured NO
as a micro cell in other cases. The classification standard can be
adjusted in practice.

Indicates a frequency priority for removing a neighbor relationship from

an NRT. When the NRT reaches its capacity, the neighbor relationship
with a cell working on the lowest priority frequency is preferentially
removed. A smaller parameter value indicates a lower priority.
If all intra-RAT frequencies are assigned the same priority 0, neighbor
relationships are removed from the NRT not based on the priority but
based on the number of handovers. If the number of handovers to a cell
is the smallest, the neighbor relationship with this cell is preferentially
removed.
If all intra-RAT frequencies are assigned the same non-zero priority, NO
neighbor relationships are removed also based on the number of
handovers. If there are removable neighboring cells working on the same
frequency as the new neighboring cell to be added, the neighbor
relationship with a cell that has the smallest number of handovers is
preferentially removed; otherwise, the frequency on which the new
neighboring cell works is not considered during the removal.
If all intra-RAT frequencies are not assigned the same priority, neighbor
relationships are removed from the NRT in ascending order of the priority
and then the number of handovers.

Indicates the type of the route between the serving cell and the
NO
coordinating cell.
Indicates the ID of the eNodeB serving the coordinating cell. NO

Indicates the ID of the coordinating sector equipment(group). NO

Indicates the ID of the eNodeB equipped with the coordinating sector

NO
equipment(group).

Indicates the start location of the cell coverage. This parameter is used
as calculate the hysteresis in uplink timing when the Extended Cell NO
Access Radius Beyond 100km feature takes effect.

Indicates the status of interference coordination in high-speed railway

scenarios. The value of this parameter can be
InterfHighSpeedStatus_NO_OP~0(Disable),
InterfHighSpeedStatus_ACT~1(Run), or
InterfHighSpeedStatus_RENEW~2(Restore).
When interference coordination in high-speed railway scenarios is
NO
disabled for a cell, the value of this parameter is
InterfHighSpeedStatus_NO_OP~0(Disable) in the command output.
When this function is being performed in the cell, the value of this
parameter is InterfHighSpeedStatus_ACT~1(Run). When resources are
restored to normal status, the value of this parameter is
InterfHighSpeedStatus_RENEW~2(Restore).

Indicates the ID of the serving sector equipment(group). NO

Indicates the ID of the eNodeB equipped with the serving sector

NO
equipment(group).
Indicates the type of sector Equipment in the coordinating cell. NO

Indicates the type of sector Equipment in the serving cell. NO

Indicates the ID of the sector device. It uniquely identifies a piece of

YES
sector equipment within an eNodeB.

Indicates the ID of the main eNodeB. YES

Indicates the local cell ID of a cell of the primary eNodeB. It uniquely

YES
identifies a cell within the primary eNodeB.

Indicates the ID of the baseband equipment serving a cell.

When this parameter is set to 255, the baseband equipment serving a
cell is not specified. In this scenario, the LTE baseband processing units
(LBBPs) serving a cell are selected among all LBBPs in the eNodeB,
and the LBBPs to which the cell's serving RRU is connected are NO
preferentially selected.
When this parameter is set to a value other than 255, the cell is served
by LBBPs in the specified baseband equipment, and the LBBPs to which
the cell's serving RRU is connected are preferentially selected.

Indicates the reference signal power of the single frequency network

(SFN) auxiliary eNodeB resource. The value 32767 indicates that this
reference signal power parameter is invalid. In this case, the reference NO
signal power of the cell refers to the value of the PDSCHCFG parameter.
For details, see 3GPP TS 36.213.
Indicates the reference signal power headroom of each physical
antenna. If this parameter is set to 0, the parameter does not take effect.
That is, the reference signal power headroom of the cell equals the value
of Reference Signal Power Margin in the PDSCHCFG MO. If this NO
parameter is set to a non-zero value, the reference signal power
headroom of the cell equals this value. This parameter applies only to
LTE TDD cells.
Indicates the common public radio interface (CPRI) compression type for
the sector equipment. CPRI compression is used in RRU cascading
scenarios to enable more RRUs to be cascaded without changing the
CPRI data rate. The parameter value NO_COMPRESSION indicates
that CPRI compression is not used. The parameter value
NORMAL_COMPRESSION indicates that CPRI compression is used.
The parameter value ENHANCED_COMPRESSION indicates that
enhanced CPRI compression is used. The parameter value NULL
indicates that this parameter is invalid. The performance of enhanced
CPRI compression is better than the performance of normal CPRI
compression. If the eNodeB is equipped with LBBPd boards and the
CPRI data rate is 9.8 Gbit/s for LTE FDD cells or the CPRI data rate is
greater than 4.9 Gbit/s for LTE TDD cells, the CPRI compression type of
NO
cells served by RRUs in the same RRU chain or ring must be the same.
If this parameter value is changed, the cell served by the sector
equipment group automatically resets. This parameter is used only when
MultiRruCellMode is set to SFN or CELL_COMBINATION. This
parameter can be set based on the sector equipment group. When this
parameter is set to NULL, the CPRI compression type of carriers
depends on the value of the CPRICompression parameter in the Cell
MO. When this parameter is set to any other value, the sector equipment
group CPRI compression type of carriers depends on the value of the
SectorCpriCompression parameter in the eUCellSectorEqm MO. Before
changing the value of this parameter for a cell served RRUs in the same
RRU chain or ring, ensure that all cells served by the RRU chain or ring
are deactivated. Activate the cells after you change the parameter value.

Indicates the ID of the sector equipment group that serves the cell. It
YES
uniquely identifies a sector equipment group within a cell.

Indicates the ID of the main eNodeB. YES

Indicates the local cell ID of a cell of the primary eNodeB. It uniquely

YES
identifies a cell within the primary eNodeB.
Indicates the ID of the baseband equipment serving a cell.
When this parameter is set to 255, the baseband equipment serving a
cell is not specified. In this scenario, the LTE baseband processing units
(LBBPs) serving a cell are selected among all LBBPs in the eNodeB,
and the LBBPs to which the cell's serving RRU is connected are NO
preferentially selected.
When this parameter is set to a value other than 255, the cell is served
by LBBPs in the specified baseband equipment, and the LBBPs to which
the cell's serving RRU is connected are preferentially selected.

Indicates the reference signal power of the single frequency network

(SFN) auxiliary eNodeB resource. The value 32767 indicates that this
reference signal power parameter is invalid. In this case, the reference NO
signal power of the cell refers to the value of the PDSCHCfg parameter.
For details, see 3GPP TS 36.213.

Indicates the sector equipment in the sector equipment group of an

NO
auxiliary eNodeB supporting inter-BBU SFN cells.

Indicates the ID of the sector equipment that serves the cell. YES

Indicates the common public radio interface (CPRI) compression type for
the sector equipment group. CPRI compression is used in RRU
cascading scenarios to enable more RRUs to be cascaded without
changing the CPRI data rate. The parameter value NO_COMPRESSION
indicates that CPRI compression is not used. The parameter value
NORMAL_COMPRESSION indicates that CPRI compression is used.
The parameter value ENHANCED_COMPRESSION indicates that
enhanced CPRI compression is used. The parameter value NULL
indicates that this parameter is invalid. The performance of enhanced
CPRI compression is better than the performance of normal CPRI
compression. If the eNodeB is equipped with LBBPd boards and the
CPRI data rate is 9.8 Gbit/s for LTE FDD cells or the CPRI data rate is
greater than 4.9 Gbit/s for LTE TDD cells, the CPRI compression type of
cells served by RRUs in the same RRU chain or ring must be the same. NO
If this parameter value is changed, the cell served by the sector
equipment group automatically resets.
This parameter is used only when MultiRruCellMode is set to SFN or
CELL_COMBINATION. This parameter can be set based on the sector
equipment group. When this parameter is set to NULL, the CPRI
compression type of carriers depends on the value of the
CPRICompression parameter in the Cell MO. When this parameter is set
to any other value, the sector equipment group CPRI compression type
of carriers depends on the value of the SectorCpriCompression
parameter in the eUCellSectorEqm MO. Before changing the value of
this parameter for a cell served RRUs in the same RRU chain or ring,
ensure that all cells served by the RRU chain or ring are deactivated.
Activate the cells after you change the parameter value.
Indicates the local ID of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the ID of the auxiliary eNodeB. YES

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the PRB usage threshold for triggering inter-frequency MLB for
low-efficiency UEs. When the UE quantity-related trigger conditions are
met and the cell load is greater than or equal to the value of this
parameter plus the load offset, inter-frequency MLB for low-efficiency
NO
UEs is triggered. When the UE quantity-related exit conditions are met or
the cell load is lower than the value of this parameter, inter-frequency
MLB for low-efficiency UEs stops. This parameter applies only to LTE
TDD cells.
Indicates the threshold of the number of synchronized UEs for triggering
inter-frequency MLB for low-efficiency UEs. When the PRB usage-
related trigger conditions are met and the number of synchronized UEs
in the local cell is greater than or equal to the value of this parameter
plus the offset of the minimum number of UEs for MLB, inter-frequency NO
MLB for low-efficiency UEs is triggered. When the PRB usage-related
exit conditions are met or the number of synchronized UEs in the local
cell is less than the value of this parameter, inter-frequency MLB for low-
efficiency UEs stops. This parameter applies only to LTE TDD cells.
Indicates the PRB usage threshold for triggering RB priority-based MCS
index selection. When inter-frequency MLB for low-efficiency UEs is
enabled and the PRB usage of the cell is less than the value of this NO
parameter, RB priority-based MCS index selection is performed. This
parameter applies only to LTE TDD cells.
Indicates the PRB usage threshold for stopping RB priority-based MCS
index selection. When inter-frequency MLB for low-efficiency UEs is
enabled and the PRB usage of the cell is greater than or equal to the NO
value of this parameter, RB priority-based MCS index selection is not
performed. This parameter applies only to LTE TDD cells.
Indicates the lowest-efficiency downlink MCS index threshold for
selecting low-efficiency UEs for MLB. The eNodeB considers a UE as a
low-efficiency UE when either of the following conditions are met:
The downlink MCS index of the UE is less than the value of this
parameter. NO
The downlink MCS index of the UE is greater than or equal to the value
of this parameter and is less than the the value of the LowEffDlMcsThd
parameter, and the PRB usage-related conditions are met.
This parameter applies only to LTE TDD cells.

Indicates the downlink MCS index threshold for selecting low-efficiency

UEs for MLB. The eNodeB considers a UE as a low-efficiency UE when
the PRB usage-related conditions are met and the downlink MCS index
NO
of the UE is greater than or equal to the value of the LowestEffDlMcsThd
parameter and is less than the value of this parameter. This parameter
applies only to LTE TDD cells.
Indicates downlink factor A for selecting low-efficiency UEs for MLB. The
eNodeB considers a UE as a low-efficiency UE when the downlink MCS
index is less than the value of the LowEffDlFactorK parameter plus the NO
product of the UE's PRB usage and the value of this parameter. This
parameter applies only to LTE TDD cells.

Indicates downlink factor K for selecting low-efficiency UEs for MLB. The
eNodeB considers a UE as a low-efficiency UE when the downlink MCS
index is less than the value of this parameter plus the product of the NO
UE's PRB usage and the value of the LowEffDlFactorA parameter. This
parameter applies only to LTE TDD cells.
Indicates the lowest-efficiency uplink MCS index threshold for selecting
low-efficiency UEs for MLB. The eNodeB considers a UE as a low-
efficiency UE when either of the following conditions are met:
The uplink MCS index of the UE is less than the value of this parameter.
NO
The uplink MCS index of the UE is greater than or equal to the value of
this parameter and is less than the uplink MCS index threshold for low-
efficiency UEs, and the PRB usage-related conditions are met.
This parameter applies only to LTE TDD cells.

Indicates the uplink MCS index threshold for selecting low-efficiency UEs
for MLB. The eNodeB considers a UE as a low-efficiency UE when the
PRB usage-related conditions are met and the uplink MCS index of the
NO
UE is greater than or equal to the value of the LowestEffUlMcsThd
parameter and is less than the value of this parameter. This parameter
applies only to LTE TDD cells.
Indicates uplink factor A for selecting low-efficiency UEs for MLB. The
eNodeB considers a UE as a low-efficiency UE when the downlink MCS
index is lower than the value of the LowEffUlFactorK parameter plus the NO
product of the UE's PRB usage and the value of this parameter. This
parameter applies only to LTE TDD cells.

Indicates uplink factor K for selecting low-efficiency UEs for MLB. The
eNodeB considers a UE as a low-efficiency UE when the uplink MCS
index is less than the value of this parameter plus the product of the NO
UE's PRB usage and the value of the LowEffUlFactorA parameter. This
parameter applies only to LTE TDD cells.
Indicates the proportion of TTIs with heavy traffic within a measurement
period. This parameter is used to identify UEs with heavy uplink traffic. If
the number of RBs required by a UE to transmit its uplink data exceeds
the maximum number of RBs that can be allocated to the UE in a TTI,
the TTI is regarded as a heavy-traffic TTI. If the proportion of heavy- NO
traffic TTIs in the total number of TTIs scheduled for the UE exceeds the
threshold specified by this parameter within a measurement threshold,
the UE is identified as a UE with heavy uplink traffic. This parameter
applies only to LTE TDD networks.

Indicates the threshold of the number of synchronized UEs in the uplink

for triggering uplink heavy traffic-based MLB. This parameter applies
only to LTE TDD networks.
If the number of synchronized UEs in the uplink is greater than or equal
NO
to the threshold specified by this parameter plus a certain offset, uplink
heavy traffic-based MLB is triggered. If the number of synchronized UEs
in the uplink is less than this threshold, uplink heavy traffic-based MLB is
stopped.

Indicates the determination period for identifying a UE with heavy traffic

NO
in the uplink. This parameter applies only to LTE TDD networks.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the maximum number of beamforming layers, that is, the rank
of beamforming. The value SINGLE_LAYER_BF indicates single-stream
beamforming (that is, beamforming with the rank of 1), and the value NO
DUAL_LAYER_BF indicates dual-stream beamforming (that is,
beamforming with the rank of 2).

Indicates the index of the times for cell channel calibration. NO

Indicates the type of cell channel calibration. NO

Indicates the result of cell channel calibration. NO

Indicates the time for starting cell channel calibration. NO

Indicates the eNodeB ID. This parameter applies only to TDD. NO

Indicates the cabinet, subrack, and slot numbers of an RF module that

NO
serves a cell. This parameter applies only to TDD.

Indicates an RX channel number of an RF module that serves a cell.

NO
This parameter applies only to TDD.

Indicates a TX channel number of an RF module that serves a cell. This

NO
parameter applies only to TDD.
Indicates the CINR of an RX channel. This parameter applies only to
NO
TDD.

Indicates the CINR of a TX channel. This parameter applies only to TDD. NO

Indicates the weight type used for dual-stream beamforming based on

the type of 8T8R antennas. This parameter applies only to LTE TDD NO
cells in which 8T8R physical antennas are used.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates the initial value of the target IBLER except that when the
downlink target IBLER adaption and enhanced downlink target IBLER
NO
adaption are enabled. If this parameter is set to 100, the CQI adjustment
amount is not updated.

Indicates the initial value of the CQI adjustment. NO

Indicates the adjustment efficiency of the baseline step in the CQI
NO
adjustment algorithm.

Indicates the CQI filtering coefficient in the CQI adjustment algorithm. NO

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates whether to configure the CSI-RS. If this parameter is set to
NOT_CFG, UEs are not configured with CSI-RSs. If this parameter is set
to FIXD_CFG, UEs supporting CSI-RSs are configured with a fixed CSI-
RS. If this parameter is set to ADAPTIVE_CFG, UEs supporting CSI-RSs
are adaptively configured or not configured with the CSI-RS based on NO
the proportion of TM9-capable UEs. If the SfnLoadBasedAdptSwitch
parameter is set to OFF(Off) for an ASFN cell on an LTE TDD network,
this parameter is invalid when it is set to FIXED_CFG(Fixed configure) or
ADAPTIVE_CFG(ADAPTIVE_CFG).

Indicates the channel state information (CSI) reference signal (RS)

NO
measurement period.

Indicates whether a CSI-RS is configured. NO

Indicates the threshold for the number of RRC_CONNECTED UEs
supporting CSI_RS that is used to evaluate a change from the CSI-RS
NO
unconfigured state to the CSI-RS configured state when adaptive CSI-
RS configuration is adopted.
Indicates the threshold for the number of RRC_CONNECTED UEs
supporting CSI_RS that is used to evaluate a change from the CSI-RS
NO
configured state to the CSI-RS unconfigured state when adaptive CSI-
RS configuration is adopted.
Indicates the threshold for the ratio of RRC_CONNECTED UEs
supporting CSI_RS that is used to evaluate a change from the CSI-RS
NO
unconfigured state to the CSI-RS configured state when adaptive CSI-
RS configuration is adopted.
Indicates the threshold for the ratio of RRC_CONNECTED UEs
supporting CSI_RS that is used to evaluate a change from the CSI-RS
NO
configured state to the CSI-RS unconfigured state when adaptive CSI-
RS configuration is adopted.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates whether to enable CSPC in the cell. NO

Indicates whether to report the changed sounding reference signal

(SRS) configurations of UEs with CSPC applied in the serving cell to the
NO
centralized control node immediately after the configurations are
changed. This parameter applies only to LTE FDD cells.
Indicates the interval at which the local cell reports its UE-specific SRS
configurations to the centralized control node. This parameter applies NO
only to LTE FDD cells.

Indicates the interval at which neighboring cells report their uplink

reference signal received power (RSRP) measurement results to the NO
local cell. This parameter applies only to LTE FDD cells.

Indicates the filtering coefficient for channel quality indicators (CQIs) in

CSPC-based power optimization. This filtering makes the reported CQIs NO
more stable.
Indicates the physical layer filtering coefficient for uplink reference signal
received power (RSRP) measurements. This filtering coefficient is used
NO
to report stable RSRPs after filtering. This parameter applies only to LTE
FDD cells.

Indicates the RRM filtering coefficient for uplink reference signal received
power (RSRP) measurements. This filtering coefficient is used to report
NO
stable RSRPs after filtering. This parameter applies only to LTE FDD
cells.

Indicates whether CSPC has been enabled in the cell. NO

Indicates the reason why CSPC is disabled in a cell. NO

Indicates the Cell type is Marco Cell or Micro Cell in CSPC. NO

Indicates inter-site DL CoMP status.This parameter applies only to LTE

NO
TDD cells.
Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the interval between periodic measurement reports that are

sent after a DL ICIC measurement event is triggered. For details, see NO
3GPP TS 36.331.

Indicates the maximum number of cells to be included in each

measurement report after a DL ICIC measurement event is triggered. For NO
details, see 3GPP TS 36.331.
Indicates the number of periodic measurement reports after a DL ICIC
NO
measurement event is triggered. For details, see 3GPP TS 36.331.

Indicates the quantity to be included in the measurement report after a

DL ICIC measurement event is triggered, which can be set to
SAME_AS_TRIG_QUAN or BOTH.
The value SAME_AS_TRIG_QUAN indicates that the quantity to be
included is the same as that specified by the TriggerQuantity parameter.
The value BOTH indicates that both RSRP and RSRQ values are NO
included.
The measured RSRP values are stable, varying little with the load, and
therefore there is little signal fluctuation. The measured RSRQ values
vary with the load and are likely to reflect the signal quality of the cell in
real time. For details, see 3GPP TS 36.331.

Indicates the quantity used in the evaluation of a DL ICIC measurement

event. The quantity can be RSRP or RSRQ. The measured RSRP values
are stable, varying little with the load, and therefore there is little signal NO
fluctuation. The measured RSRQ values vary with the load but are likely
to reflect the signal quality of the cell in real time.
Indicates the hysteresis for the DL ICIC measurement event. This
parameter is used to decrease frequent triggering of event evaluations NO
due to radio signal fluctuations. For details, see 3GPP TS 36.331.

Indicates the time-to-trigger for the DL ICIC measurement event. When

detecting that the signal quality in the serving cell and that in at least one
neighboring cell meet the entering condition, the UE does not send a
NO
measurement report to the eNodeB immediately. Instead, the UE sends
a report only when the signal quality continuously meets the entering
condition during the time-to-trigger.
Indicates the offset for DL ICIC event A3. This offset is the difference
between the quality of a neighboring cell and that of the serving cell. A
NO
larger value indicates that a neighboring cell must have better quality for
the reporting of the event.
Indicates the offset for DL ICIC event A6. This offset is the difference
between the quality of a neighboring cell and that of the serving cell. A
NO
larger value indicates that a neighboring cell must have better quality for
the reporting of the event.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the number of high-band resource blocks (RBs) that the E-

UTRAN cell can share with GERAN cells in GSM and LTE dynamic
spectrum sharing. The gains that an E-UTRAN cell can obtain have a
positive correlation with the number of RBs that the E-UTRAN cell
shares with GERAN cells. Currently, GSM and LTE dynamic spectrum NO
sharing supports one third of the E-UTRAN cell bandwidth to be shared
with GERAN cells. However, to mitigate the interference from GERAN
cells, it is recommended that the shared bandwidth should not exceed
one fifth of the E-UTRAN cell bandwidth.
Indicates the number of low-band resource blocks (RBs) that the E-
UTRAN cell can share with GERAN cells in GSM and LTE dynamic
spectrum sharing. The gains that an E-UTRAN cell can obtain have a
positive correlation with the number of RBs that the E-UTRAN cell
shares with GERAN cells. Currently, GSM and LTE dynamic spectrum NO
sharing supports one third of the E-UTRAN cell bandwidth to be shared
with GERAN cells. However, to mitigate the interference from GERAN
cells, it is recommended that the shared bandwidth should not exceed
one fifth of the E-UTRAN cell bandwidth.

Indicates whether PDCCH resource elements (REs) are transmitted in

the shared spectrum when the spectrum is being occupied by the
GERAN cell in GSM and LTE dynamic spectrum sharing. If this
parameter is set to ON, PDCCH REs are not transmitted in the shared
NO
spectrum when the spectrum is being occupied by the GERAN cell. If
this parameter is set to OFF, PDCCH REs are always transmitted in the
shared spectrum regardless of whether the shared spectrum is being
occupied by the GERAN cell.
Indicates the UL narrowband interference restriction mode used in the
GSM and LTE FDD Dynamic Spectrum Sharing(LTE FDD) feature.
The value NONE indicates that UL narrowband interference is not
restricted.
The value BASEBANDPROCESS indicates that UL narrowband
interference is restricted through baseband processing. The interference
NO
scope of GSM is compressed and only RBs close to the GSM spectrum
are affected. As a result, RBs far away from the GSM spectrum and the
LTE spectrum can work properly and LTE performance improves.
The value ADAPTIVEPROCESS indicates UL narrowband interference is
restricted through adaptive processing. This algorithm further enhances
the interference restriction capability and improves LTE performance.
Indicates the offset of a neighboring cell's signal level that triggers event
A3 used in GSM and LTE dynamic spectrum sharing. Measurement
reports for this event A3 are reported only if the signal level of at least
NO
one neighboring cell is better than that of the local cell by this offset. If
this parameter is set to a larger value, the probability of UEs reporting
this event A3 is lower.
Indicates the offset of a neighboring cell's signal level that triggers event
A6 used in GSM and LTE dynamic spectrum sharing. Measurement
reports for this event A6 are reported only if the signal quality of at least
one neighboring cell is better than that of the secondary serving cell NO
(SCell) in carrier aggregation (CA) by a quantity of this offset. If this
parameter is set to a larger value, the probability of UEs reporting this
event A6 is lower.
Indicates the signal to interference plus noise ratio (SINR) threshold
used to determine whether UEs located at short distances away from the
center of the E-UTRAN cell can use resource blocks (RBs) in the shared
spectrum when GSM and LTE dynamic spectrum sharing is enabled. If NO
the SINR of RBs in the shared spectrum is greater than or equal to the
NearAreaSinrThd parameter value, the RBs can be used by UEs located
at short distances away from the center of the E-UTRAN cell.
Indicates the signal to interference plus noise ratio (SINR) threshold
used to determine whether UEs located at medium distances away from
the center of the E-UTRAN cell can use resource blocks (RBs) in the
shared spectrum when GSM and LTE dynamic spectrum sharing is
NO
enabled. If the SINR of RBs in the shared spectrum is greater than or
equal to the MiddleAreaSinrThd parameter value, the RBs can be used
by UEs located at medium distances away from the center of the E-
UTRAN cell.
Indicates the signal to interference plus noise ratio (SINR) threshold
used to determine whether UEs located at far distances away from the
center of the E-UTRAN cell can use resource blocks (RBs) in the shared
spectrum when GSM and LTE dynamic spectrum sharing is enabled. If NO
the SINR of RBs in the shared spectrum is greater than or equal to the
FarAreaSinrThd parameter value, the RBs can be used by UEs located
at far distances away from the center of the E-UTRAN cell.

Indicates the mode of configuring interfering neighboring cells that work

on the same frequency as the local cell. The value ECOCONFIG
indicates that interfering neighboring cells are configured by the
NO
eCoordinator. The value ENODEBAIDCONFIG indicates that the
eNodeB takes part in the configuration; under this setting, intra-site intra-
frequency cells must be bound to the same baseband processing unit.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES

Indicates the statistic period of dynamic access class (AC) barring in a

cell, during which the proportion of time that the cell is in the congestion NO
state is exported.
Indicates the threshold for triggering dynamic access class (AC) barring
in the cell. This threshold specifies the proportion of time that the cell is
in the congestion state. If the proportion of time that the cell is in the
NO
congestion state is greater than or equal to this parameter value within a
statistic period (specified by the DynAcBarStatPeriod parameter), the
conditions for triggering dynamic AC barring are met.

Indicates the threshold for canceling dynamic access class (AC) barring
in the cell. This threshold specifies the proportion of time that the cell is
in the congestion state. If the proportion of time that the cell is in the
NO
congestion state is less than or equal to this parameter value within a
statistic period (specified by the DynAcBarStatPeriod parameter), the
conditions for canceling dynamic AC barring are met.

Indicates the number of periods for triggering intelligent access barring

on specific services. If related triggering conditions are met in
NO
consecutive periods specified by this parameter, intelligent access
barring on specific services is triggered.
Indicates the number of periods for canceling intelligent access barring
on specific services. If related cancellation conditions are met in
NO
consecutive periods specified by this parameter, intelligent access
barring on specific services is canceled.

Indicates the disaster reference indications used for determining whether

a cell is in the disaster state. If all switches included in this parameter are
off, the disaster state of the cell does not need to be determined.
ETWS_PN: Indicates whether Primary notifications (PNs) in the
earthquake and tsunami warning system (ETWS) is used in the disaster
state determination. The PNs for ETWS do not include PNs used for
ETWS tests.
If this switch is on, PNs in ETWS are used in the disaster state
determination.
If this switch is off, PNs in ETWS are not used in the disaster state
determination.
ETWS_PN_TEST: Indicates whether PNs for ETWS tests are used in the NO
disaster state determination.
If this switch is on, PNs in ETWS tests are used in the disaster state
determination.
If this switch is off, PNs in ETWS tests are not used in the disaster state
determination.
CMAS: Indicates whether commercial mobile alert system (CMAS)
warning notifications are used in the disaster state determination.
If this switch is on, CMAS warning notifications are used in the disaster
state determination.
If this switch is off, CMAS warning notifications are not used in the
disaster state determination.

Indicates the duration that the cell is in the disaster state. The cell is out
NO
of the disaster state after the duration specified by this parameter ends.
Indicates the number of consecutive periods for triggering intelligent
access class control on mobile-originated (MO) calls or signaling if NO
related triggering conditions are met.

Indicates the number of consecutive periods for canceling intelligent

access class control on mobile-originated (MO) calls or signaling if NO
related cancellation conditions are met.

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.
Indicates the ABS pattern after static TDM eICIC is enabled. This
parameter is valid only when static TDM eICIC is enabled. Different ABS
pattern settings indicate different ABS quantities and ABS sequence
numbers in the same period. For example, the value
NO
SUBFRAME_ONE_PER_FIVE for FDD indicates one ABS per 5 ms. The
ABS pattern is a bitmap with 40 bits. For details, see the definition of
ABS Pattern Info in 3GPP TS 36.423. All cells in the entire network need
to be configured with the same ABS pattern.

Indicates whether UEs are allowed to send measurement reports for

event A3 during enhanced inter-cell interference coordination (eICIC).
The parameter value ENABLE indicates that UEs are allowed to send
measurement reports for event A3 during eICIC. The parameter value NO
DISABLE indicates that UEs are not allowed to send measurement
reports for event A3 during eICIC, and in this case the eNodeB cannot
determine whether to enable eICIC in different scenarios.
Indicates the offset for event A3 during enhanced inter-cell interference
coordination (eICIC). This offset is the difference between the signal
quality of a neighboring cell and that of the serving cell. A larger value
indicates that a neighboring cell must have better signal quality for the NO
reporting of event A3. A smaller value indicates that the requirement on
the neighboring cell signal quality for reporting event A3 can be met
easier. For details, see 3GPP TS 36.331.

Indicates the period of adjusting the ABS pattern of a macro cell in

dynamic eICIC. This parameter must be configured based on the
number of cells and the load of X2 interfaces. It is recommended that the
NO
ABS adjustment period (unit: s) be equal to the number of macro cells of
the local eNodeB multiplied by the number of micro cells in the local
macro cell. This parameter is valid only for FDD, not for TDD.

Indicates the local ID of a cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates a cell frame offset mode.
CustomFrameOffset(Cell Frame Offset): Indicates that the cell frame
offset is user defined. An FDD cell can use only this mode.
TL_FrameOffset(T-L Dual Mode frame offset): Indicates that the cell
frame offset is automatically configured based on the subframe
NO
configuration type in a TD-SCDMA_TD-LTE network.
TL_FrameOffset_SA2_SSP5(T-L Dual Mode SA2+SSP5 frame offset):
Indicates that the cell frame offset is automatically configured based on
subframe configuration type 2 and special subframe configuration type 5
in a TD-SCDMA_TD-LTE network.

Indicates the offset of the start time of a cell frame against a reference
NO
clock source.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES
Indicates the offset for reporting the measurement event for IICS UE
attribute calculation. This offset is the difference between the signal
quality of a neighboring cell and that of the serving cell. A larger value NO
indicates that a neighboring cell must have better quality for the reporting
of the event.
Indicates the threshold of user attribute determination in the UL IICS
algorithm. If a UE-reported value is greater than or equal to this
parameter value, the UE has strong interference to neighboring cells. If a NO
UE-reported value is less than this parameter value, the UE has weak
interference to neighboring cells.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the switch for the functionality of the low power consumption
mode. The cell can enter the low power consumption mode only when NO
this parameter is set to ON and specific conditions are met.

Indicates the switch for forcibly entering the low power consumption
mode. When both this switch and the functionality switch are set to ON,
the cell enters the low power consumption mode as soon as the wait
time for entering the mode elapses, regardless of whether it is within the
low power consumption period. When the functionality switch is set to NO
ON but this switch is set to OFF, the cell enters the low power
consumption mode as soon as the wait time for entering the mode
elapses, if a mains input out of range(Specific Problem: AC Failure)
alarm is reported within the low power consumption period.
Indicates the start time of the low power consumption mode. NO

Indicates the stop time of the low power consumption mode. If the stop
time is earlier than or the same as the start time, the stop time is NO
assumed to be a time of the next day.

Indicates the duration in which the transmit power for services is reduced
NO
in the cell in low power consumption mode.

Indicates the duration in which the reference signal transmit power is

NO
reduced in the cell in low power consumption mode.
Indicates the duration in which RF channels are shut down in the cell in
NO
low power consumption mode.

Indicates the percentage of the transmit power for services to the total
transmit power for services when the low power consumption mode is NO
implemented by means of reducing the transmit power for services.

Indicates the amount by which the reference signal transmit power is

NO
reduced in the cell in low power consumption mode.
Indicates the duration when the cell stays in normal mode before
entering the low power consumption mode. In low power consumption
mode, a cell automatically takes the following actions in sequence: 1.
lowers the transmit power for services; 2. lowers the transmit power for
reference signals; 3. shuts down some RF channels in the cell; 4. shuts
down the cell. This duration smooths the transition from the normal mode NO
to the low power consumption mode for the cell. If the conditions for the
cell to enter the low power consumption mode are no longer met during
this period of time, the cell will not enter the low power consumption
mode; otherwise, it enters the low power consumption mode and takes
the preceding actions in sequence.

Indicates the backup power saving policy of the eNodeB when the mains
supply is cut off and the eNodeB is powered by storage batteries. The
degradation duration in each policy is automatically configured as
follows: If this parameter is set to POLICY3, the duration of service
power degradation and that of reference signal power degradation are
both 120 minutes, and the maximum duration of RF channel intelligent
shutdown is 1440 minutes. If this parameter is set to POLICY2, the
duration of service power degradation, reference signal power
degradation, and RF channel intelligent shutdown is all 120 minutes. If
this parameter is set to POLICY1, the duration of service power
NO
degradation, that of reference signal power degradation, and that of RF
channel intelligent shutdown are all 0 minutes. If this parameter is set to
POLICY1, POLICY2 or POLICY3, the ratio of available service power to
total service power is 50%, the adjustment offset for reference signal
power is -1 dB, and the wait time for entering the low power consumption
mode is 5 minutes. If this parameter is set to CUSTOMIZED, you can
customize the duration of power degradation, the ratio of available
service power to total service power, the adjustment offset for reference
signal power, and the wait time for entering the low power consumption
mode.

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the ID of an MBSFN area to which a cell belongs. NO

Indicates the ID of an MBSFN synchronization area to which a cell

NO
belongs.

Indicates the TMGI of an MBMS session. The TMGI consists of the

MCC, MNC, and ServiceID with each two parts connected by a hyphen NO
(-). TMGIs are separated by comma (,).
Indicates the switch that is used to enable and disable the MBMS
function.
If this switch is set to ON, the MBMS function is enabled, and the cell NO
supports the MBMS service. If this switch is set to OFF, the MBMS
function is disabled.

Indicates the list of MBMS service areas to which cells belong. NO

Indicates the ID of MBMS service area to which a cell belongs. YES

SERVICECONTINUITYSWITCH: Indicates whether MBMS service

continuity can be maintained. MBMS service continuity can be
maintained in inter-frequency networking by turning on this switch.
If this switch is on, MBMS service continuity can be maintained. The
eNodeB broadcasts SIB15 and determines whether to perform inter-
frequency handovers for MBMS service continuity on an
NO
RRC_CONNECTED UE based on the MBMS Interest Indication
message sent by the UE. In addition, the eNodeB sends the service area
ID (SAI) of the serving cell to neighboring cells over the X2 interface.
If this switch is off, MBMS service continuity is disabled, the eNodeB
does not broadcast SIB15, perform inter-frequency handovers for MBMS
service continuity, or send the SAI of the serving cell.

NEIGHCELLCONFIGADAPTIVESWITCH: Indicates whether the

neighboring cell configurations take effect adaptively. In the eMBMS
feature, the MBSFN subframe configuration for a cell dynamically
changes based on the MBMS session setups. Neighboring cell
configurations can be dynamically updated based on the changes of
MBSFN subframe configurations of neighboring cells. NO
If this switch is on, neighboring cell configurations in the local cell are
updated and broadcast according to the MBSFN subframe
configurations of the neighboring cells transmitted over X2 interfaces.
If this switch is off, neighboring cell configurations use static parameter
settings.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the priority of the UEs' PRB load used as a criterion for MLB-
oriented UE selection. The parameter value 0 indicates that the PRB
load is not regarded as a criterion for MLB-oriented UE selection, the
parameter value 255 indicates that the PRB load is regarded as a
mandatory criterion for MLB-oriented UE selection, and the parameter
NO
value ranging from 1 to 254 indicates that the PRB load is regarded as a
preferential criterion for MLB-oriented UE selection. A larger value
indicates a higher priority, and UEs meeting the criterion have a higher
priority to be selected for MLB . This parameter applies only to LTE TDD
cells.
Indicates the priority of the UEs' QCI as a criterion for MLB-oriented UE
selection. The parameter value 0 indicates that the QCI is not regarded
as a criterion for MLB-oriented UE selection, the parameter value 255
indicates that the QCI is regarded as a mandatory criterion for MLB-
oriented UE selection, and the parameter value ranging from 1 to 254 NO
indicates that the QCI is regarded as a preferential criterion for MLB-
oriented UE selection. A larger value indicates a higher priority, and UEs
meeting the criterion have a higher priority to be selected for MLB. This
parameter applies only to LTE TDD cells.

Indicates the priority of the UEs' ARP as a criterion for MLB-oriented UE

selection. The parameter value 0 indicates that the ARP is not regarded
as a criterion for MLB-oriented UE selection, the parameter value 255
indicates that the ARP is regarded as a mandatory criterion for MLB-
oriented UE selection, and the parameter value ranging from 1 to 254 NO
indicates that the ARP is regarded as a preferential criterion for MLB-
oriented UE selection. A larger value indicates a higher priority, and UEs
meeting the criterion have a higher priority to be selected for MLB. This
parameter applies only to LTE TDD cells.

Indicates the priority of the UEs' downlink MCS as a criterion for MLB-
oriented UE selection. The parameter value 0 indicates that the downlink
MCS is not regarded as a criterion for MLB-oriented UE selection, the
parameter value 255 indicates that the downlink MCS is regarded as a
mandatory criterion for MLB-oriented UE selection, and the parameter
NO
value ranging from 1 to 254 indicates that the downlink MCS is regarded
as a preferential criterion for MLB-oriented UE selection. A larger value
indicates a higher priority, and UEs meeting the criterion have a higher
priority to be selected for MLB. This parameter applies only to LTE TDD
cells.

Indicates the ARP threshold for selecting UEs to be transferred for MLB.
A UE is selected only if the ARPs of all the UE's services is higher than
or equal to this threshold. The parameter value 1 indicates the highest
NO
priority and the parameter value 15 indicates the lowest priority. If this
parameter is set to a large value, UEs with low service priorities are
selected to perform MLB. This parameter applies only to LTE TDD cells.
Indicates the downlink MCS threshold for selecting UEs to be transferred
for MLB. A UE is selected only if the downlink MCS index of the UE is
greater than or equal to this threshold. If this parameter is set to a large NO
value, UEs with better downlink channel quality are selected to perform
MLB. This parameter applies only to LTE TDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates whether to set the upper and lower limits of the CIO adjustment
range for the cell.
If this parameter is set to CFG(Configure), the CIO for the cell can be
changed by an amount within the range specified by the upper and lower
limits.
If this parameter is set to NOT_CFG(Not configure), the upper and lower
limits of the CIO adjustment range for the cell in intra-frequency MRO
are calculated by using the following formulas: Lower limit = Off + Ofs +
Ocs - Ofn + Hys - 5, Upper limit = Off + Ofs + Ocs - Ofn + Hys - 2, where
Off is the offset for intra-frequency handover, Ofs and Ofn are the
frequency-specific offsets for the serving frequency and neighboring
frequency respectively, Ocs is the cell-specific offset for the serving cell,
and Hys is the hysteresis for intra-frequency handover.
If this parameter is set to NOT_CFG(Not configure) and the Inter-Freq NO
HO trigger Event Type parameter is set to EventA4(EventA4), the upper
and lower limits of the CIO adjustment range for the cell in inter-
frequency MRO are calculated by using the following formulas: Lower
limit = -24, Upper limit < thresh + 110 - Ofn + Hys, where thresh is the
RSRP threshold for triggering a coverage-based inter-frequency
handover and Hys is the hysteresis for inter-frequency handover.
If this parameter is set to NOT_CFG(Not configure) and the Inter-Freq
HO trigger Event Type parameter is set to EventA3(EventA3), the upper
and lower limits of the CIO adjustment range for the cell in inter-
frequency MRO are calculated by using the following formulas: Lower
limit = Off + Ofs + Ocs - Ofn + Hys - 5, Upper limit = Off + Ofs + Ocs -
Ofn + Hys - 2, where Off is the inter-frequency A3 offset, and Hys is the
hysteresis for intra-frequency handover.
Indicates the upper limit of cell individual offset (CIO) adjustment range
for the cell in mobility robustness optimization (MRO). This parameter
NO
needs to be set only when the CioAdjLimitCfgInd parameter is set to
CFG.
Indicates the lower limit of cell individual offset (CIO) adjustment range
for the cell in mobility robustness optimization (MRO). This parameter
NO
needs to be set only when the CioAdjLimitCfgInd parameter is set to
CFG.

Indicates the upper limit used to adjust the reference signal received
NO
power (RSRP) threshold for triggering inter-frequency event A2.

Indicates the lower limit used to adjust the reference signal received
NO
power (RSRP) threshold for triggering inter-frequency event A2.

Indicates the upper limit used to adjust the reference signal received
power (RSRP) threshold for triggering A3-oriented inter-frequency event NO
A2.

Indicates the lower limit used to adjust the reference signal received
power (RSRP) threshold for triggering A3-oriented inter-frequency event NO
A2.
Indicates the selection of inter-frequency adjustable parameters in inter-
frequency MRO. InterfreqA1RsrpSwitch: Indicates whether the RSRP
threshold for triggering inter-frequency event A1 in the inter-frequency
handover parameter group can be adjusted. The RSRP threshold can be
adjusted only when this switch is on. InterfreqA2RsrpSwitch: Indicates
whether the RSRP threshold for triggering inter-frequency event A2 in
the inter-frequency handover parameter group can be adjusted. The
RSRP threshold can be adjusted only when this switch is on.
A3InterfreqA1RsrpSwitch: Indicates whether the RSRP threshold for
triggering A3-oriented inter-frequency event A1 in the inter-frequency
handover parameter group can be adjusted. The RSRP threshold can be
adjusted only when this switch is on. A3InterfreqA2RsrpSwitch: Indicates
whether the RSRP threshold for triggering A3-oriented inter-frequency NO
event A2 in the inter-frequency handover parameter group can be
adjusted. The RSRP threshold can be adjusted only when this switch is
on. InterfreqA3CioSwitch: Indicates whether the cell individual offset
(CIO) of the inter-frequency neighboring cell for inter-frequency event A3
can be adjusted. The CIO can be adjusted only when this switch is on.
InterfreqA4CioSwitch: Indicates whether the CIO of the inter-frequency
neighboring cell for inter-frequency event A4 can be adjusted. The CIO
can be adjusted only when this switch is on. InterfreqA5Switch: Indicates
whether the CIO of the inter-frequency neighboring cell for inter-
frequency event A5 and related threshold 1 for triggering inter-frequency
event A5 can be adjusted. The CIO and related threshold 1 can be
adjusted only when this switch is on.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES
Indicates the SRS power control algorithm, which can be SINR-based
SRS power control algorithm or the SRS power control algorithm based
NO
on the converged SINR and RSRP. This parameter is dedicated to LTE
TDD cells.
Indicates whether the P0NominalPUCCH parameter affects closed-loop
power control (CL PC) for the PUCCH. If this parameter is set to
NOT_USE_P0NOMINALPUCCH, the P0NominalPUCCH parameter
does not affect CL PC for the PUCCH. If this parameter is set to NO
USE_P0NOMINALPUCCH, the reference signal received power (RSRP)
cannot exceed the P0NominalPUCCH parameter value in CL PC for the
PUCCH.

Indicates the period of power control for the PUCCH. NO

Indicates the offset to the target signal to interference plus noise ratio
NO
(SINR) in power control for the PUCCH.

Indicates the upper limit of RSRP in closed-loop power control for the
PUSCH. This parameter takes effect only when
NO
PuschRsrpHighThdSwitch of the UlPcAlgoSwitch parameter in the
CellAlgoSwitch MO is on. This switch applies only to LTE FDD cells.
Indicates the offset for reporting the uplink PUSCH IoT-based power
control measurement event. This offset is the difference between the
signal quality of a neighboring cell and that of the serving cell. A larger
value indicates that a neighboring cell must have better quality for NO
reporting the event. A smaller value indicates that the event can be
reported when a neighboring cell has worse quality. For details, see
3GPP TS 36.331. This parameter is dedicated to LTE TDD cells.
Indicates whether to enable IoT near point optimization.
If this parameter is set to OFF, the eNodeB does not deliver A3
measurements to optimize the uplink throughput of UEs near the cell
center in scenarios with strong interference (the IoT value is greater than
7 dB). NO
If this parameter is set to ON, the eNodeB delivers A3 measurements to
optimize the uplink throughput of UEs near the cell center in scenarios
with strong interference (the IoT value is greater than 7 dB).
This parameter applies only to TDD cells.
Indicates the path loss threshold of UEs to which the event A3
measurement configuration is sent in IoT power control-related CCU
uplink throughput optimization when the IoT is greater than 7 dB.
If the path loss of a UE is lower than this threshold, the eNodeB sends NO
the event A3 measurement configuration to this UE.
If the path loss of a UE is higher than this threshold, the eNodeB does
not send the event A3 measurement configuration to this UE.

Indicates the target SINR value for SRS power control. A large target
SINR value increases the transmit power of UEs, which causes
interference on neighboring cells. A small target SINR value decreases
the transmit power of UEs, which leads to poor uplink SRS receive
NO
performance of the local cell. If the inter-cell interference is strong, set
this parameter to a small value. If the SRS receive performance of the
local cell is poor, set this parameter to a large value. This parameter
applies only to LTE TDD cells.
Indicates the target RSRP value for SRS power control. A large target
RSRP value increases the transmit power of UEs, which causes
interference on neighboring cells. A small target RSRP value decreases
the transmit power of UEs, which leads to poor uplink SRS receive
NO
performance of the local cell. If the inter-cell interference is strong, set
this parameter to a small value. If the SRS receive performance of the
local cell is poor, set this parameter to a large value. This parameter
applies only to LTE TDD cells.

Indicates the transmit power spectral density for the PUSCH of normal
UEs when the SchedulerCtrlPowerSwitch(SchedulerCtrlPowerSwitch)
check box under the UlSchSwitch parameter is selected.
The larger the value of this parameter, the higher the transmit power
NO
spectral density for the PUSCH of normal UEs. If this parameter is set to
ADAPTIVE, the eNodeB automatically adjusts the transmit power
spectral density of these UEs based on the network load.This parameter
applies only to LTE TDD cells.
Indicates the scope of UEs near the cell center for which optimized
closed-loop power control for the PUSCH is enabled.
If this parameter is set to Normal, optimized closed-loop power control is
enabled for all UEs near the cell center.
If this parameter is set to Us, optimized closed-loop power control is
enabled only for UEs near the cell center running unlimited services.
If this parameter is set to ULBigPkt, optimized closed-loop power control NO
is enabled only for UEs near the cell center running services with large
packets in the uplink.
If this parameter is set to UsOrUlBigPkt, optimized closed-loop power
control is enabled for UEs near the cell center running unlimited services
and those running services with large packets in the uplink.
This parameter applies only to LTE TDD cells.
Indicates the target BLER to be approached after optimized closed-loop
power control is enabled for UEs near the cell center. This parameter NO
applies only to LTE TDD cells.
Indicates the transmit power spectral density for the PUSCH of UEs
running unlimited services when the
SchedulerCtrlPowerSwitch(SchedulerCtrlPowerSwitch) check box under
the UlSchSwitch parameter is selected.
The larger the value of this parameter, the higher the transmit power NO
spectral density for the PUSCH of UEs running unlimited services. If this
parameter is set to SAME AS NS, the transmit power spectral density of
these UEs is the same as that of Normal UEs. This parameter applies
only to LTE TDD cells.
Indicates whether to enable noise and interference correction for
interference-based uplink power control. This parameter applies only to NO
LTE TDD cells.

Indicates the path loss threshold for identifying CEUs used for
interference coordination in the interference-based uplink power control NO
function. This parameter applies only to LTE TDD cells.
Indicates the interference threshold for triggering interference-based
NO
uplink power control. This parameter applies only to LTE TDD cells.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES

Indicates the threshold for triggering MLB based on the PRB evaluation
value. This parameter takes effect only when Mobility Load Balancing
Trigger Mode is set to PRB_ONLY(PrbMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode) and Prb Load Calculation
Method is set to PRB_VALUATION_WITH_CTRL or
PRB_VALUATION_NO_CTRL. If the number of uplink synchronized UEs
NO
in a cell is greater than or equal to the sum of the MlbMinUeNumThd
parameter value and the MlbMinUeNumOffset parameter value, and the
cell load is higher than the threshold, MLB is triggered. If the number of
uplink synchronized UEs in a cell is smaller than the MlbMinUeNumThd
parameter value and the cell load is lower than the threshold, MLB is
stopped. This parameter applies only to LTE TDD cells.
Indicates the threshold for allowing inter-frequency MLB based on the
PRB evaluation value in the target cell. This parameter takes effect only
when Mobility Load Balancing Trigger Mode is set to
PRB_ONLY(PrbMode) or PRB_OR_UE_NUMBER(PrbOrUeNumMode)
and Prb Load Calculation Method is set to
PRB_VALUATION_WITH_CTRL or PRB_VALUATION_NO_CTRL. If the NO
PRB evaluation value of a neighboring cell is smaller than this threshold,
the load from the cell can be transferred to the neighboring cell. If the
PRB evaluation value of a neighboring cell is greater than or equal to this
threshold, the load from the cell cannot be transferred to the neighboring
cell. This parameter applies only to LTE TDD cells.

Indicates the threshold of UE-specific PRB evaluation for selecting UEs

for MLB. A UE is transferred for MLB based on PRB evaluation only
NO
when the downlink or uplink PRB evaluation of the UE is higher than the
value of this parameter. This parameter is dedicated to LTE TDD cells.

Indicates the filtering coefficient used to calculate the PRB evaluation

value. The filtering value is calculated by weighting the measured PRB
evaluation value and history filtering value based on the filtering
coefficient. If this parameter is set to a small value, the filtering value is NO
close to the history filtering value. If this parameter is set to a large value,
the filtering value is close to the measured value. This parameter applies
only to LTE TDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates the threshold of the distance between a UE and the eNodeB
for determining whether a contention-based preamble sent by the UE is
a PRACH false alarm. If this parameter is set to 0, the eNodeB does not
consider a preamble as a false alarm based on the distance. If this
parameter is set to a non-zero value and the eNodeB detects that the NO
distance is longer than this parameter value, the preamble is considered
as a false alarm. The distance is calculated based on the timing advance
(TA) of the contention-based preamble that the eNodeB received for the
first time from a UE.
Indicates the percentage by which the physical random access channel
(PRACH) false alarm detection threshold increases. For example, the
value x indicates that the system-defined PRACH false alarm detection NO
threshold increases by x%, and the value -x indicates that the system-
defined PRACH false alarm detection threshold decreases by x%.

Indicates the MNC of a conflict cell. A PLMN ID is composed of an MCC

and an MNC. The MCC consists of three digits. The MNC consists of two
NO
to three digits. For example, if the MCC is 123 and the MNC is 45, the
PLMN ID is 12345.
Indicates the eNodeB ID of a conflict cell located in the same PLMN as
the local cell. A local cell ID and an eNodeB ID compose a 28-bit E-
UTRAN cell ID, where the eNodeB ID is represented by the 20 most
NO
significant bits. An E-UTRAN cell ID and a PLMN ID compose an E-
UTRAN CGI (ECGI). For details about this parameter, see 3GPP TS
36.413.

Indicates the ID of the cell that conflicts with the local cell. It uniquely
identifies a cell within an eNodeB. The 28-bit E-UTRAN cell identity is
comprised of the cell ID in the most significant eight bits and the eNodeB
NO
ID. The E-UTRAN cell identity and the PLMN ID forms the E-UTRAN cell
global identifier (ECGI). For details about this parameter, see 3GPP TS
36.413.
Indicates the MCC of a conflict cell. A PLMN ID is composed of an MCC
and an MNC. The MCC consists of three digits. The MNC consists of two
NO
to three digits. For example, if the MCC is 123 and the MNC is 45, the
PLMN ID is 12345.
Indicates the period for an eNodeB to avoid PRACH interference. This
parameter is used to control the speed of PRACH frequency domain
position adjustment to prevent ping-pong adjustments due to NO
interference fluctuation. This parameter applies only to the TDLOFD-
081217 Interference Detection and Restraining Enhancement feature.

Indicates the threshold for an eNodeB to determine whether PRACH

interference is severe. When the value of PRACH interference (per PRB)
is greater than or equal to the value of this parameter, an eNodeB
NO
determines that PRACH interference is severe. This parameter applies
only to the TDLOFD-081217 Interference Detection and Restraining
Enhancement feature.
Indicates the hysteresis for an eNodeB to determine PRACH
interference. This parameter is used to reduce the number of ping-pong
adjustments due to interference fluctuation. This parameter is used with
the Prach Interference Threshold parameter to determine weak PRACH
interference and moderate PRACH interference. When the value of
PRACH interference is less than the value of Prach Interference
Threshold minus the value of Prach Interference Hysteresis, the eNodeB
NO
determines that PRACH interference is weak. When the value of PRACH
interference is greater than or equal to the value of Prach Interference
Threshold minus the value of Prach Interference Hysteresis and less
than the value of Prach Interference Threshold, the eNodeB determines
that PRACH interference is moderate. This parameter applies only to the
TDLOFD-081217 Interference Detection and Restraining Enhancement
feature.

Indicates the local cell ID. It uniquely identifies a cell within a BS. YES

Indicates the Allocation and Retention Priority (ARP) threshold for the
Golden-level services. A service is defined as a Golden-level service if its
NO
ARP value is smaller than or equal to this threshold. The service priority
has a negative correlation with the ARP value.

Indicates the Allocation and Retention Priority (ARP) threshold for the
Silver-level services. A service is defined as a Silver-level service if its
ARP value is smaller than or equal to the value of this parameter and is
larger than the value of GoldServiceArpThd. A service is defined as a NO
Bronze-level service if its ARP value is larger than the value of this
parameter. The service priority has a negative correlation with the ARP
value.
Indicates the admission threshold for the handed-over service with QCI
of 1. This threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 1 is above or equal to this
NO
threshold, the handed-over service with QCI of 1 can be admitted.
If the satisfaction rate of services with QCI of 1 is below this threshold,
the handed-over service with QCI of 1 cannot be admitted.

Indicates the admission threshold for the handed-over service with QCI
of 2. This threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 2 is above or equal to this
NO
threshold, the handed-over service with QCI of 2 can be admitted.
If the satisfaction rate of services with QCI of 2 is below this threshold,
the handed-over service with QCI of 2 cannot be admitted.
Indicates the admission threshold for the handed-over service with QCI
of 3. This threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 3 is above or equal to this
NO
threshold, the handed-over service with QCI of 3 can be admitted.
If the satisfaction rate of services with QCI of 3 is below this threshold,
the handed-over service with QCI of 3 cannot be admitted.

Indicates the admission threshold for the handed-over service with QCI
of 4. This threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 4 is above or equal to this
NO
threshold, the handed-over service with QCI of 4 can be admitted.
If the satisfaction rate of services with QCI of 4 is below this threshold,
the handed-over service with QCI of 4 cannot be admitted.
Indicates the offset for admission of new gold-level services. This
parameter applies to both downlink and uplink. New gold-level services
and handed-over services with QCI N are admitted if both the following
conditions are met: (1) The satisfaction rate of services with QCI N is
NO
higher than or equal to the sum of this offset and the admission threshold
for the handed-over services with QCI N. (2) The satisfaction rate of
services with any other QCI is higher than or equal to the corresponding
admission threshold for the handed-over services with that QCI.
Indicates the offset for admission of new silver-level services. This
parameter applies to both downlink and uplink. New silver-level services
and handed-over services with QCI N are admitted if both the following
conditions are met: (1) The satisfaction rate of services with QCI N is
NO
higher than or equal to the sum of this offset and the admission threshold
for the handed-over services with QCI N. (2) The satisfaction rate of
services with any other QCI is higher than or equal to the corresponding
admission threshold for the handed-over services with that QCI.
Indicates the offset for admission of new bronze-level services. This
parameter applies to both downlink and uplink. New bronze-level
services and handed-over services with QCI N are admitted if both the
following conditions are met: (1) The satisfaction rate of services with
QCI N is higher than or equal to the sum of this offset and the admission NO
threshold for the handed-over services with QCI N. (2) The satisfaction
rate of services with any other QCI is higher than or equal to the
corresponding admission threshold for the handed-over services with
that QCI.
Indicates the congestion threshold for services with QCI of 1. This
threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 1 in the cell becomes lower
than this threshold, the services with QCI of 1 enter the congested state. NO
If the satisfaction rate of services with QCI of 1 in the cell becomes
higher than the sum of this threshold and the congestion relief offset, the
services with QCI of 1 leave the congested state.
Indicates the congestion threshold for services with QCI of 2. This
threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 2 in the cell becomes lower
than this threshold, the services with QCI of 2 enter the congested state. NO
If the satisfaction rate of services with QCI of 2 in the cell becomes
higher than the sum of this threshold and the congestion relief offset, the
services with QCI of 2 leave the congested state.
Indicates the congestion threshold for services with QCI of 3. This
threshold applies to both UL and DL.
If the satisfaction rate of the services with QCI of 3 in the cell becomes
lower than this threshold, the services with QCI of 3 enter the congested
NO
state.
If the satisfaction rate of services with QCI of 3 in the cell becomes
higher than the sum of this threshold and the congestion relief offset, the
services with QCI of 3 leave the congested state.
Indicates the congestion threshold for services with QCI of 4. This
threshold applies to both UL and DL.
If the satisfaction rate of services with QCI of 4 in the cell becomes lower
than this threshold, the services with QCI of 4 enter the congested state. NO
If the satisfaction rate of services with QCI of 4 in the cell becomes
higher than the sum of this threshold and the congestion relief offset, the
services with QCI of 4 leave the congested state.
Indicates the congestion release offset. The service of a specific QCI
exits the congestion state if the satisfaction rate of the service exceeds
the sum of this congestion release offset and the congestion threshold
NO
for the QCI. The service retains the congestion state if the satisfaction
rate is below or equal to the sum of this congestion release offset and
the congestion threshold for the QCI.
Indicates the threshold for deciding on whether the UL RB usage is high.
This threshold applies to UL admission decision. If the UL RB usage
NO
reported by the MAC layer is above this threshold, the UL RB usage is
assumed to be high.
Indicates the threshold for deciding on whether the UL RB usage is low.
It applies to UL admission decision. If the UL RB usage reported by the
NO
MAC layer is below this threshold, the UL RB usage is assumed to be
low.

Indicates the UE numbers reserved for UEs initiating emergency calls

and high-priority UEs. If this parameter is set to 0, no UE number is
reserved for UEs initiating emergency calls and high-priority UEs. A non- NO
zero value of this parameter represents the maximum UE number
reserved for UEs initiating emergency calls and high-priority UEs.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates whether to enable or disable RF channel intelligent shutdown

for the cell. RF channel intelligent shutdown can be performed in the cell NO
only when this parameter is set to ON and certain conditions are met.
Indicates the start time of the cell RF channel intelligent shutdown. NO

Indicates the stop time of RF channel intelligent shutdown for the cell. If
the stop time is earlier than or the same as the start time, the stop time is NO
assumed to be a time of the next day.

Indicates the value by which the reference signal power is increased

during the RF channel intelligent shutdown period. The reference signal
power increases by the value specified by this parameter to ensure
NO
coverage of the cell. If this parameter is set to a value greater than 3, the
value 3 applies in effect. Otherwise,the configuration value applies in
effect.

Indicates the downlink physical resource block (PRB) usage threshold

for RF channel intelligent shutdown. If the current cell load is less than or
equal to both the uplink PRB usage threshold and downlink PRB usage
threshold, the cell enters the RF channel intelligent shutdown mode. The
cell exits the RF channel intelligent shutdown mode when the cell load
reaches 100% or when either of the following conditions are met: (1) The
current cell load is greater than the sum of the uplink PRB threshold and
NO
uplink PRB offset; (2) The sum of the downlink PRB threshold and
downlink PRB offset.
A smaller value of this parameter results in more difficulty for the cell to
enter the RF channel intelligent shutdown mode, which does not
facilitate eNodeB power saving. A larger value of this parameter results
in less difficulty for the cell to enter the RF channel intelligent shutdown
mode, which affects services.

Indicates the uplink physical resource block (PRB) usage threshold for
RF channel intelligent shutdown. If the current cell load is less than or
equal to both the uplink PRB usage threshold and downlink PRB usage
threshold, the cell enters the RF channel intelligent shutdown mode. The
cell exits the RF channel intelligent shutdown mode when the cell load
reaches 100% or when either of the following conditions are met: (1) The
current cell load is greater than the sum of the uplink PRB threshold and
NO
uplink PRB offset; (2) The sum of the downlink PRB threshold and
downlink PRB offset.
A smaller value of this parameter results in more difficulty for the cell to
enter the RF channel intelligent shutdown mode, which does not
facilitate eNodeB power saving. A larger value of this parameter results
in less difficulty for the cell to enter the RF channel intelligent shutdown
mode, which affects services.

Indicates the downlink physical resource block (PRB) offset for RF

channel intelligent shutdown.
The cell exits the RF channel intelligent shutdown mode when the cell
load reaches 100% or when either of the following conditions are met:
(1) The current cell load is greater than the sum of the uplink PRB
threshold and uplink PRB offset; (2) The sum of the downlink PRB
NO
threshold and downlink PRB offset.
A smaller value of this parameter leads to less difficulty for the cell in
exiting the RF channel intelligent shutdown mode and a higher
probability of ping-pong RF channel shutdown. A larger value of this
parameter leads to more difficulty for the cell in exiting the RF channel
intelligent shutdown mode, which affects services.
Indicates the uplink physical resource block (PRB) offset for RF channel
intelligent shutdown.
The cell exits the RF channel intelligent shutdown mode when the cell
load reaches 100% or when either of the following conditions are met:
(1) The current cell load is greater than the sum of the uplink PRB
threshold and uplink PRB offset; (2) The sum of the downlink PRB
NO
threshold and downlink PRB offset.
A smaller value of this parameter leads to less difficulty for the cell in
exiting the RF channel intelligent shutdown mode and a higher
probability of ping-pong RF channel shutdown. A larger value of this
parameter leads to more difficulty for the cell in exiting the RF channel
intelligent shutdown mode, which affects services.

Indicates the UE number threshold for RF channel intelligent shutdown.

RF channel intelligent shutdown is enabled in the cell if all of the
following conditions are met: (1) the number of UEs in
RRC_CONNECTED mode is less than or equal to this parameter value;
(2) the uplink cell load is less than or equal to the uplink physical
resource block (PRB) usage; (3) the downlink cell load is less than or
equal to the downlink PRB usage. RF channel intelligent shutdown is
disabled in the cell if one of the following conditions is met: (1) the
number of UEs in RRC_CONNECTED mode is greater than this NO
parameter value; (2) the uplink cell load is greater than the sum of uplink
PRB usage and uplink PRB offset; (3) the downlink cell load is greater
than the sum of downlink PRB usage and downlink PRB offset.
If this parameter is set to a smaller value, the cell is harder to enter the
RF channel intelligent shutdown mode, which does not facilitate eNodeB
power saving. If this parameter is set to a larger value, the cell is easier
to enter the RF channel intelligent shutdown mode, which affects user
services. This parameter applies only to FDD cells.
Indicates the current status about RF channel intelligent shutdown for a
NO
cell.
Indicates the latest exiting cause about RF channel intelligent shutdown
NO
for a cell.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the switch for the remote interference cancellation algorithm. If

this switch is turned on, the eNodeB performs remote interference
detection and records in call history record (CHR) logs if any interference NO
is detected. If this switch is turned off, the eNodeB does not perform
remote interference detection.
Indicates the number of empty symbols in an uplink pilot timeslot
(UpPTS). If this parameter is set to a non-zero value N, then no data is
transmitted within the N symbols starting from the first symbol in the
NO
UpPTS. Note that, for any given special subframe configuration, the
value of this parameter cannot be greater than the total number of
symbols contained in the UpPTS.

Indicates whether to empty the last symbol in each uplink subframe.If

this parameter is set to ON(On), the last symbol in each uplink subframe
NO
is emptied. If this parameter is set to OFF(Off), the last symbol in each
uplink subframe is not emptied.

Indicates the local cell identity. It uniquely identifies a cell within an

YES
eNodeB.
Indicates the switches related to service differentiation in a cell.
CellConStaReportSwitch: Indicates the switch used to control whether
the cell congestion information is reported using the extended GTP-U
headers to the EPC. The guideline can be found in documents related to
the EPC feature, which is Wireless Optimization Based on Flow Priority.
FPIGTPUSwitch: Indicates whether to enable the service differentiation
feature using the extended GTP-U header containing the FPI value. The
guideline can be found in documents related to the EPC feature, which is NO
Wireless Optimization Based on Flow Priority.
DSCPRemarkSwitch: Indicates whether to enable the DSCP Remark-
based service differentiation feature. If DSCPRemarkSwitch is set to On,
the eNodeB guarantees differentiated quality of service (QoS) based on
the service type specified by the DSCP field in the IP packet sent by the
PDN gateway to the eNodeB. This parameter is dedicated to LTE FDD
cells.

Indicates the threshold for determining the cell congestion status based
on the physical resource block (PRB) usage. The eNodeB generates a
cell congestion indicator based on this parameter and the NO
CellConStateUeNumThd parameter and then sends the indicator to the
EPC.
Indicates the threshold for determining the cell overload status based on
the physical resource block (PRB) usage. The eNodeB generates a cell
overload indicator based on this parameter and the NO
CellConStateUeNumThd parameter and then sends the indicator to the
EPC.
Indicates the threshold for determining the cell congestion status based
on the uplink-synchronized UE number. The eNodeB generates a cell
NO
congestion indicator based on this parameter and the
CellConStatePrbThd parameter and then sends the indicator to the EPC.
Indicates the threshold for determining the cell overload status based on
the uplink-synchronized UE number. The eNodeB generates a cell
NO
overload indicator based on this parameter and the CellConStatePrbThd
parameter and then sends the indicator to the EPC.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services
in a queue has a positive correlation with the value of this parameter. NO
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) or
DSCPRemarkSwitch(DSCPRemarkSwitch) is turned on. When
DSCPRemarkSwitch is turned on, this parameter indicates the weight of
nonP2P service queue.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services
in a queue has a positive correlation with the value of this parameter. NO
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) or
DSCPRemarkSwitch(DSCPRemarkSwitch) is turned on. When
DSCPRemarkSwitch is turned on, this parameter indicates the weight of
P2P service queue.
Indicates the weight of the queue, which is used in service differentiation
scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services NO
in a queue has a positive correlation with the value of this parameter.
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) is
turned on.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services NO
in a queue has a positive correlation with the value of this parameter.
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) is
turned on.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services NO
in a queue has a positive correlation with the value of this parameter.
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) is
turned on.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services NO
in a queue has a positive correlation with the value of this parameter.
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) is
turned on.

Indicates the weight of the queue, which is used in service differentiation

scheduling. The value of this parameter is used in calculating the priority
of a UE during scheduling and therefore determines the scheduling
probability of this UE. The scheduling probability and priority of services NO
in a queue has a positive correlation with the value of this parameter.
This parameter is valid only if FPIGTPUSwitch(FPIGTPUSwitch) is
turned on.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates whether to enable or disable intelligent power-off of carriers in

the same coverage. Intelligent power-off of carriers in the same
coverage can be performed only when this parameter is set to ON and
NO
specific conditions are met. For intelligent power-off of carriers in the
same coverage, each basic cell must have its intelligent power-off of
carriers switch enabled and the UL or DL PRB usage threshold set to 0.

Indicates the start time of intelligent power-off of carriers in the same

NO
coverage.

Indicates the stop time of intelligent power-off of carriers in the same

coverage. If the stop time is earlier than or the same as the start time, NO
the stop time is assumed to be a time of the next day.
Indicates the downlink PRB threshold for starting intelligent power-off of
NO
carriers in the same coverage for the cell.

Indicates the downlink PRB offset for stopping intelligent power-off of

carriers in the same coverage for the cell. The downlink PRB threshold
for stopping intelligent power-off of carriers in the same coverage for the
NO
cell is equal to the sum of the downlink PRB threshold for starting
intelligent power-off of carriers in the same coverage and the value of
this parameter.

Indicates the uplink PRB threshold for starting intelligent power-off of

NO
carriers in the same coverage for the cell.

Indicates the uplink PRB offset for stopping intelligent power-off of

carriers in the same coverage for the cell. The uplink PRB threshold for
stopping intelligent power-off of carriers in the same coverage for the cell
NO
is equal to the sum of the uplink PRB threshold for starting intelligent
power-off of carriers in the same coverage and the value of this
parameter.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates whether to enable scheduling optimization on single radio LTE-

capable UEs. A single radio LTE-capable UE periodically leaves the LTE
system and listens to the paging channel of another RAT during camping
or activation, and then returned to the LTE system after listening. If the
eNodeB schedules the single radio LTE-capable UE when the UE is
absent from the LTE system and listens to the paging channel of another
RAT, RB resources are wasted. Based on scheduling optimization on
single radio LTE-capable UEs, the eNodeB uses DTX detection to
NO
distinguish single radio LTE-capable UEs that leaves the LTE system
and listens to the paging channel of another RAT, and then stops
scheduling these UEs.
If this parameter is set to ON, scheduling optimization on single radio
LTE-capable UEs is enabled.
If this parameter is set to OFF, scheduling optimization on single radio
LTE-capable UEs is disabled.
This parameter applies only to LTE FDD cells.
Indicates the threshold for the number of consecutive times that a single
radio LTE-capable UE experiences discontinuous transmission (DTX),
including DTX times on the PUSCH and PDSCH.
If the number of consecutive times that a single radio LTE-capable UE
experiences DTX reaches this threshold, the eNodeB determines that NO
the UE is absent from the LTE mode and listens to the paging channel of
another RAT, and therefore the eNodeB stops scheduling the UE for a
period of time specified by the SrlteSuspendTime parameter. This
parameter takes effect only when the SrlteSwitch parameter is set to ON.

Indicates the period of time during which the eNodeB does not schedule
a single radio LTE-capable UE because the UE is absent from the LTE
NO
mode. This parameter takes effect only when the SrlteSwitch parameter
is set to ON.
Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the offset for the UL ICIC measurement event. If this parameter
is set to a large value, the signal quality of the neighboring cell must be
NO
significantly better than that of the serving cell before a UL ICIC
measurement event is triggered. For details, see 3GPP TS 36.331.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the UL scheduling policy, which determines the scheduling
priority order in which UEs are arranged in UL. There are four UL
scheduling strategies: MAX C/I, proportional fair (PF), round Robin (RR),
and enhanced proportional fair (EPF). The MAX C/I policy schedules
UEs in descending order of average signal to interference plus noise
ratio (SINR). The PF policy schedules UEs in ascending order of ratio of
the data rate to the SINR. The RR policy schedules each UE in
sequence, and therefore each UE has an equal opportunity to be NO
scheduled. The EPF policy schedules UEs in ascending order of priority.
In EPF, the priority of an UE is calculated based on the following factors:
the data rate, average SINR, QoS-satisfying data rate for each service,
and service differentiation requirements of the UE. The MAX C/I, PF, and
RR policies are basic UL scheduling policies and supported by the
eNodeB by default, whereas the EPF policy is intended for commercial
use.
Indicates the switch that is used to control whether to enable or disable
UL adaptive HARQ. If this switch is set to ADAPTIVE_HARQ_SW_OFF,
UL data is retransmitted by non-adaptive synchronous HARQ. If this
switch is set to ADAPTIVE_HARQ_SW_ON, UL data is retransmitted by
adaptive synchronous HARQ. If this switch is set to
ADAPTIVE_HARQ_SW_SEMION, adaptive HARQ is triggered when a
UL grant is delivered to an HARQ process that is previously suspended NO
due to reasons such as resource collision, activation of a measurement
gap, and PDCCH congestion. Setting this parameter to
ADAPTIVE_HARQ_SW_ON helps reduce resource consumption due to
retransmission, increase the cell throughput, and prevent retransmission
conflicts. This, on the other hand, will increase signaling overhead and
therefore consume more PDCCH resources.
Indicates the target IBLER of the SINR adjustment algorithm. A greater
parameter value indicates a greater SINR adjustment value, and thus a NO
higher-level MCS is used.

Indicates the ratio of the maximum bandwidth resources that the uplink
scheduler can allocate to preallocation UEs to the total system NO
bandwidth.
Indicates the minimum interval between two pre-allocations. That is, the
actual interval between two pre-allocations of one UE must be longer NO
than or equal to the value of this parameter.

Indicates the data amount pre-allocated to each user. NO

Indicates whether frequency hopping (FH) is enabled or disabled and

which FH type is used.
Hopping_OFF: indicates that FH is disabled.
Hopping_Type1: indicates that adaptive FH is enabled and FH type 1 is
used. In this scenario, UEs in the cell can determine whether to use FH
based on the actual situation. NO
Hopping_Type2: indicates that adaptive FH is enabled and FH type 2 is
used. In this scenario, UEs in the cell can determine whether to use FH
based on the actual situation.
Hopping_Type2_RANDOM: indicates that random FH is enabled and FH
type 2 is used. In this scenario, all UEs in the cell use FH.

Indicates the percentage of free shared RBs on the PUSCH in

scheduling based on free users and subscribers. The other RBs on the
PUSCH are allocated to subscribers. When sufficient capacity is
available, the percentage of RBs occupied by free users and that
NO
occupied by subscribers will reach the preset values. Changes in this
parameter affect the percentage of RBs for free users and that for
subscribers. The value of this parameter cannot be changed when the
cell is active.This parameter applies only to LTE TDD cells.
Indicates the data length that the UL scheduler assigns to UEs that have
sent scheduling requests. Within the data length, the UEs reports their NO
buffer status and transmit certain data.

Indicates the threshold for the number of consecutive zero-payload

packets received by the eNodeB. After receiving consecutive zero-
NO
payload packets of a number that is equal to the value of this parameter,
the eNodeB performs implicit release of semi-persistent resources.
Indicates the duration of uplink smart preallocation triggered by downlink
scheduling. If SmartPreAllocationSwitch is set to On and this parameter
NO
is set to 0, neither smart preallocation nor preallocation takes effect. If
SmartPreAllocationSwitch is set to Off, this parameter is invalid.

Indicates the capacity factor for uplink enhanced proportional fair (EPF)
scheduling. When the eNodeB schedules UEs with unsatisfied GBR, this
factor affects the scheduling priorities of UEs running services with the
QCI of 1, 2, 3, or 4. When the eNodeB schedules UEs running Non-GBR NO
services, this factor affects the scheduling priorities of UEs running
services with the QCI of 6, 7, 8, or 9. In this way, this factor can be used
to adjust the cell capacity and fairness among UEs.
Indicates the strategy for allocating resource blocks (RBs) in the uplink of
the cell. If this parameter is set to FS_NONFS_ADAPTIVE, this strategy
adaptively switches between frequency selective scheduling and non-
frequency selective scheduling. If this parameter is set to NO
FS_INRANDOM_ADAPTIVE, this strategy adaptively switches between
frequency selective scheduling and interference-randomization-based
scheduling.

Indicates the Doppler measurement level, which is used for selecting a

Doppler measurement policy. If this parameter is set to CLASS_0, the
demodulation reference signal (DMRS) whose signal to interference plus
noise ratio (SINR) is greater than or equal to 5 dB is used in Doppler NO
measurement. If this parameter is set to CLASS_1, the DMRS whose
SINR is greater than or equal to –5 dB is used in Doppler measurement.
This parameter does not take effect on cells established on an LBBPc.
Indicates the maximum transmission times of hybrid automatic repeat
requests (HARQs) in the uplink, excluding the HARQ transmission based
on TTI bundling. For details, see 3GPP TS 36.331. When a UE runs
services with a QCI of 1, the smaller value between the parameter value
and 5 is used as the maximum number of uplink HARQ transmissions.
When the UE does not run services with a QCI of 1, the parameter value
is used as the maximum number of uplink HARQ transmissions. This
parameter has coupling relationships with the
NO
ENodeBAmReorderingTimer or the ENodeBUmReorderingTimer
parameter. When the UlHarqMaxTxNum parameter is set to 7, it is
recommended that the ENodeBAmReorderingTimer or
ENodeBAUmReorderingTimer parameter be set to a value greater than
or equal to 50 ms. When the UlHarqMaxTxNum parameter is set to 8, it
is recommended that the ENodeBAmReorderingTimer or
ENodeBAUmReorderingTimer parameter be set to a value greater than
or equal to 60 ms.

Indicates the smart preallocation duration for sparse packets. The larger
value between this parameter and the SmartPreAllocationDuration
NO
parameter is selected as the actual smart preallocation duration for
sparse packets.
Indicates the semi-persistent scheduling period in the uplink. This
parameter applies only to LTE TDD cells. In FDD mode, the uplink semi-
persistent scheduling period is 20 ms and cannot be configured. If this
parameter is set to ADAPTIVE, the system adaptively selects an uplink NO
semi-persistent scheduling period of 20 ms or 40 ms. If this parameter is
set to ms20 or ms40, the downlink semi-persistent scheduling period is
20 ms or 40 ms, respectively.
Indicates whether to increase the scheduling request indicator (SRI)
false detection threshold for UEs in the discontinuous reception (DRX)
state. If this parameter is set to ON, the threshold increases and the SRI NO
false detection probability decreases. If this parameter is set to OFF,
both the threshold and the probability remain unchanged.

Indicates the number of consecutive transmission time intervals (TTIs)

within which the eNodeB does not perform uplink scheduling after a NO
measurement gap. This parameter applies only to LTE FDD networks.
Indicates whether to enable delay-based dynamic scheduling
prioritization for VoIP services. If this parameter is set to
NO_DELAYSCH, delay-based dynamic scheduling prioritization for VoIP
services is disabled. If this parameter is set to VOIP_DELAYSCH, delay-
based dynamic scheduling prioritization for VoIP services is enabled. NO
Scheduling priorities are dynamically adjusted based on VoIP packet
delays during uplink dynamic scheduling, thereby increasing the mean
opinion score (MOS) and system capacity for VoIP services when the
cell is heavily loaded with VoIP services.

Indicates the threshold of consecutive cyclic redundancy check (CRC)

errors in the uplink above which the eNodeB stops scheduling the NO
abnormal UE. The parameter value range is from 6 to 120.
Indicates the size threshold for determining whether a packet is a special
packet. This parameter can be set based on the size of special small
packets, such as heartbeat packets. This parameter is used to reduce
the impact of services with small packets on the calculation of
performance counters related to uplink throughput. Changing this NO
parameter value affects values of counters
L.Thrp.Time.UE.UL.RmvSpecificTTI and L.Thrp.bits.UE.UL.SpecificTTI.
For details about the impact, see the "Measurement Point" of the
counters in eNodeB Performance Counter Reference.

Indicates whether to enable scheduling request (SR) masking in logical

channels for UEs complying with 3GPP Release 9 or later when the
SpsSchSwitch option under the UlSchSwitch parameter is selected. If
NO
this parameter is set to ON(On), SR masking in logical channels is
enabled. If this parameter is set to OFF(Off), SR masking in logical
channels is disabled.

Indicates the scheduling policy for the initial PUSCH transmission that is
detected as discontinuous transmission (DTX) when PuschDtxSwitch of
the UlSchSwitch parameter is on. If the PuschDtxSchStrategy parameter
is set to NEW_TX, initial transmission instead of retransmission is
performed when the initial PUSCH transmission is detected as DTX. If NO
the PuschDtxSchStrategy parameter is set to ADAPTIVE_RETX,
adaptive retransmission is performed when the initial PUSCH
transmission is detected as DTX. This parameter does not apply to LTE
TDD.
Indicates whether to apply upper limit control on service data unit (SDU)
segmentation at the radio link control (RLC) layer in the uplink for VoIP
services scheduled in non-TTI bundling mode and the maximum SDU
segments at the RLC layer.
If this parameter is set to 0, the upper limit control on SDU segmentation
at the RLC layer is disabled in the uplink for VoIP services scheduled in NO
non-TTI bundling mode.
If this parameter is set to a non-zero value X, upper limit control on SDU
segmentation at the RLC layer is enabled and a maximum of X SDU
segments that can be divided for VoIP services in uplink dynamic
scheduling in non-TTI bundling mode.
UlVoipPreAllocationSwtich(Bit0), UlVoipDelaySchSwitch(Bit1),
UlVoIPLoadBasedSchSwitch(Bit2), UlVoipSchOptSwitch(Bit3), and
UlVoLTEDataSizeEstSwitch(Bit4).
UlVoipPreAllocationSwtich: This switch controls whether to schedule
VoIP UEs during talk spurts when the number of online UEs exceeds 50
in a cell. If this switch is off, voice preallocation is not performed. If this
switch is on, voice preallocation is performed. This switch applies only to
LTE FDD networks.
UlVoipDelaySchSwitch: This switch controls whether to schedule VoIP
UEs based on delays when there are a large number of VoIP UEs and
these UEs are evenly distributed. If this switch is turned off, delay-based
scheduling is not performed. If this switch is turned on, the scheduling
priorities are calculated based on delays. This switch applies only to LTE
TDD networks.
UlVoIPLoadBasedSchSwitch: Indicates whether to enable adaptive
selection of VoIP scheduling mode based on the cell load. There are two
scheduling modes: dynamic scheduling and semi-persistent scheduling.
If this switch is off, adaptive selection of dynamic and semi-persistent
scheduling cannot be performed for UEs running voice services based NO
on the cell load. If this switch is off, dynamic and semi-persistent
scheduling can be adaptively selected for UEs running voice services
based on the cell load. This switch applies only to LTE TDD cells.
UlVoipSchOptSwitch: Indicates whether to enable scheduling
optimization for VoIP services in the uplink. If this option is deselected,
this function is disabled. If this option is selected, an uplink dynamic
scheduling is triggered for VoIP UEs adopting uplink dynamic scheduling
when the scheduling interval is greater than the uplink scheduling
interval threshold for VoIP UEs. This ensures timely uplink scheduling on
voice services even when SR missing detection occurs, thereby avoiding
packet loss caused by the expiration of the PDCP packet discarding
timer.
UlVoLTEDataSizeEstSwitch: Indicates whether to enable the estimation
of traffic volume dynamically scheduled for VoLTE services in the
uplink.If this option is deselected, this function is disabled. If this option is
selected, the eNodeB estimates the uplink traffic volume that is
dynamically scheduled for VoLTE services, which shortens the VoLTE
packet delay, reduces the packet loss rate, improves the voice service
Indicates the signal to interference plus noise ratio (SINR) threshold
under which interference-based frequency selective resource allocation
is enabled in the uplink. This parameter takes effect only when NO
UlInterfFssSwitch of the UlSchSwitch parameter is on. This parameter
applies only to LTE FDD networks.

Indicates the threshold of downlink reference signal received power

(RSRP) difference used to maintain the interference measurement sets
of UEs in intra-eNodeB Coordinated Uplink AMC. If UL CoMP is
disabled, the CAMC maintains the interference measurement sets of
UEs based on this parameter value and event A3 measurement reports.
The eNodeB selects the neighboring cell with the largest downlink RSRP
difference (calculated by the RSRP of the neighboring cell minus the
NO
RSRP of the serving cell) from the CoMP set. If this largest downlink
RSRP difference is greater than the UlCamcDlRsrpOffset parameter
value, the neighboring cell is added to the interference measurement set.
If UL CoMP is enabled, this parameter setting does not take effect and
the eNodeB selects a neighboring cell that has the strongest RSRP and
belongs to the CAMC coordinating cell set from the candidate CoMP set
and adds the neighboring cell to the interference measurement set.
Indicates the threshold of channel quality statistic times during which the
channel quality of a UE consistently meets conditions for entering
transmission time interval (TTI) bundling. Before a UE enters TTI
bundling, the eNodeB performs statistic on the channel quality of the UE
at the interval of 20 ms or longer. If the number of statistic times during
which the channel quality of the UE consistently meets conditions for NO
entering TTI bundling is greater than this parameter value, the UE enters
TTI bundling. This parameter helps delay the time for entering TTI
bundling and decrease the probability of unnecessary TTI bundling
entering caused by wireless signal fluctuation. This parameter applies
only to LTE FDD networks.
Indicates the threshold of channel quality statistic times during which the
channel quality of a UE consistently meets conditions for exiting from
transmission time interval (TTI) bundling. Before a UE exits from TTI
bundling, the eNodeB performs statistic on the channel quality of the UE
at the interval of 20 ms or longer. If the number of statistic times during
which the channel quality of the UE consistently meets conditions for NO
exiting from TTI bundling is greater than this parameter value, the UE
exits TTI bundling. This parameter helps delay the time for UEs to exit
from TTI bundling and decrease the probability of unnecessary exit from
TTI bundling caused by wireless signal fluctuation. This parameter
applies only to LTE FDD networks.
Indicates the hysteresis of the signal to interference plus noise ratio
(SINR) threshold for exiting from transmission time interval (TTI)
bundling against the SINR threshold for entering TTI bundling. The
NO
hysteresis decreases the probability of unnecessary exit from TTI
bundling caused by wireless signal fluctuation. This parameter applies
only to LTE FDD networks.
Indicates whether to apply upper limit control on service data unit (SDU)
segmentation at the radio link control (RLC) layer in the uplink for
services scheduled in transmission time interval (TTI) bundling mode and
the maximum SDU segments at the RLC layer. If this parameter is set to
0, the upper limit control on SDU segmentation at the RLC layer is
NO
disabled in the uplink for services scheduled in TTI bundling mode. If this
parameter is set to a non-zero value X, upper limit control on SDU
segmentation at the RLC layer is enabled and a maximum of X SDU
segments that can be divided for services in uplink dynamic scheduling
in TTI bundling mode. This parameter applies only to LTE FDD networks.

Indicates the maximum transmission times of hybrid automatic repeat

requests (HARQs) based on transmission time interval (TTI) in the NO
uplink. For details, see 3GPP TS 36.331.
Indicates the policy of triggering transmission time interval (TTI) bundling
when TtiBundlingSwitch of the UlSchSwitch parameter is on.
If this parameter is set to SERVICE_VOIP, the eNodeB triggers TTI
bundling for UEs running only VoIP services in the uplink.
NO
If this parameter is set to SERVICE_MULTIAPP, the eNodeB triggers TTI
bundling for all UEs running VoIP services, including UEs running only
VoIP services and UEs running both VoIP services and data services in
the uplink.

FastReportDopSwitch: Indicates whether to shorten the period that the

baseband processing unit reports Doppler measurements to the MAC
layer. If this switch is on, the Doppler measurement reporting period is
NO
shortened with the predefined reporting conditions. If this switch is off,
the Doppler measurements are reported at the predefined periods and
with the predefined conditions.
Indicates whether to enable enhanced VMIMO. Enhanced VMIMO
applies to heavy-loaded scenarios with a large number of UEs and
heavy traffic. Enhanced VMIMO optimized the principle and procedure
for pairing UEs to increase the transmission rate of paired UEs. This
parameter applies only to LTE TDD cells.
Enhanced VMIMO relies on the existing VMIMO. Enhanced VMIMO can
be enabled only when the UlVmimoSwitch check box in the Uplink
schedule switch parameter is selected. The detailed rules are as follows:
NO
When the UlVmimoSwitch check box is selected and this parameter is
set to ON, enhanced VMIMO is enabled.
When the UlVmimoSwitch check box is selected and this parameter is
set to OFF, VMIMO is enabled.
When the UlVmimoSwitch check box is deselected and this parameter is
set to ON, VMIMO and enhanced VMIMO are both disabled.
When the UlVmimoSwitch check box is deselected and this parameter is
set to OFF, VMIMO and enhanced VMIMO are both disabled.

Indicates the threshold for the number of synchronized UEs in a cell

above which the PDCCH and PUSCH resource allocation optimization
mechanism is activated in large traffic volume scenarios. If this
parameter is set to a value ranging from 0 to 10000 (indicating a NO
threshold from 0 UE to 10,000 UEs), the mechanism is activated when
the number of synchronized UEs in the cell is greater than or equal to
this parameter value. This parameter applies only to LTE FDD networks.
Indicates the traffic volume threshold of a UE above which the UE is
determined as a UE with large packets in the PDCCH and PUSCH
resource allocation optimization mechanism when traffic is heavy. If this
parameter is set to 0, none of the UEs is determined as a UE with large
packets. If this parameter is set to a value ranging from 1 to 1000000 NO
(indicating a threshold from 1 bit to 1,000,000 bits), a UE whose traffic to
be scheduled is greater than or equal to this parameter value is
determined as a UE with large packets. This parameter applies only to
LTE FDD networks.
Indicates the head overhead of data in uplink scheduling. This
parameter applies only to LTE FDD networks. This parameter value 0bit
indicates that the data does not have head overhead. The parameter
value 32bit indicates that the head overhead is 32 bits. This parameter
can be set to 32bit in scenarios where RLC initial transmission is
performed on a single service and the MAC layer does not send control
units. The parameter value 48bit indicates that the head overhead is 48
bits. This parameter can be set to 48bit in scenarios where RLC initial
transmission is performed on a single service and the MAC layer sends
buffer status reports (BSRs) or power headroom reports (PHRs). The
parameter value 64bit indicates that the head overhead is 64 bits. This
parameter can be set to 64bit in scenarios where RLC initial
NO
transmission is performed on a single service and the MAC layer sends
BSRs and PHRs. The parameter value 80bit indicates that the head
overhead is 80 bits. This parameter can be set to 80bit in scenarios
where RLC retransmission is performed on a single service and the MAC
layer sends BSRs and PHRs. The parameter value 96bit indicates that
the head overhead is 96 bits. This parameter can be set to 96bit in
scenarios where RLC initial transmission is performed on multiple
services and the MAC layer sends BSRs and PHRs. The parameter
value 128bit indicates that the head overhead is 128 bits. This parameter
can be set to 128bit in scenarios where RLC initial transmission is
performed on multiple services and the MAC layer sends BSRs and
PHRs.

Indicates the minimum interval between two preallocations for a UE with

sparse packets. This is, the interval between two times that a UE with NO
sparse packets is preallocated cannot be less than this parameter value.
Indicates the data amount preallocated to each UE with sparse packets. NO

Indicates the uplink interference randomization mode. The parameter

value TWO_MODE_BASED_ON_PCI indicates that resources are
allocated from high frequency bands to low frequency bands in cells with
even PCI numbers and resources are allocated from low frequency
bands to high frequency bands in cells with odd PCI numbers. The
parameter value THREE_MODE_BASED_ON_PCI indicates that the
following three interference randomization modes are supported when
the uplink RB usage is less than or equal to 60%: (1). Resources are
allocated from high frequency bands to low frequency bands in cells with
the value 0 after the PCI-modulo-3 operation; (2). Resources are NO
allocated from low frequency bands to high frequency bands in cells with
the value 1 after the PCI-modulo-3 operation; (3). Resources are
allocated from the central frequency bands to high frequency bands in
cells with the value 2 after the PCI-modulo-3 operation. If the uplink RB
usage is more than 60%, only interference randomization modes
specified by the parameter value TWO_MODE_BASED_ON_PCI are
supported. If the UlRbAllocationStrategy parameter is set to
FS_INRANDOM_ADAPTIVE, the UlInterfRandomMode parameter
setting takes effect. This parameter applies only to LTE FDD networks.
Indicates the target IBLER in the SINR calibration algorithm used for
dynamic scheduling of voice users in non-TTI-bundling mode. A larger
NO
value of this parameter results in a larger SINR adjustment and a higher
MCS to be selected.

Indicates the period during which the uplink load of an SFN cell is
measured. The isolation threshold is adjusted based on the cell load in a
measurement period. High load leads to low isolation threshold, and UEs
are likely to enter independent scheduling mode. Low load leads to high
NO
isolation threshold, and UEs are likely to enter joint scheduling mode.
This parameter is valid only when the SfnUlSchSwitch parameter in the
CellAlgoSwitch MO is set to ADAPTIVE(Adaptive scheduling). This
parameter applies only to LTE TDD cells.
Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the threshold of the resource-insufficiency-induced RRC

connection rejection rate, which is used to determine whether to start
UMTS and LTE unified overload control. UMTS and LTE unified overload
control starts when both of the following conditions are met: (1) The
resource-insufficiency-induced RRC connection rejection rate is greater
NO
than the RrcRejectRateHighThd parameter value; (2) The number of
RRC connection setup requests is greater than the RrcReqNumHighThd
parameter value. The actual threshold equals the percentage value of
this parameter divided by 10. For example, the GUI value 10 indicates
that the actual value is 1% (= 10 x 1%/10).
Indicates the threshold of the resource-insufficiency-induced RRC
connection rejection rate, which is used to determine whether to stop
UMTS and LTE unified overload control. UMTS and LTE unified overload
control stops if all of the following conditions are met: (1) The number of
RRC_CONNECTED UEs is less than the UeNumLowThd parameter
value; (2) The resource-insufficiency-induced RRC connection rejection NO
rate is less than the RrcRejectRateLowThd parameter value; (3) The
number of RRC connection setup requests is less than the
RrcReqNumLowThd parameter value. The actual threshold equals the
percentage value of this parameter divided by 10. For example, the GUI
value 10 indicates that the actual value is 1% (= 10 x 1%/10).
Indicates the threshold of the number of RRC connection setup requests,
which is used to determine whether to start UMTS and LTE unified
overload control. UMTS and LTE unified overload control starts when
both of the following conditions are met: (1) The number of RRC
NO
connection setup requests is greater than the RrcReqNumHighThd
parameter value; (2)The resource-insufficiency-induced RRC connection
rejection rate is greater than the RrcRejectRateHighThd parameter
value.
Indicates the threshold of the RRC connection setup request number,
which is used to determine whether to stop UMTS and LTE unified
overload control. UMTS and LTE unified overload control stops if all of
the following conditions are met: (1) The number of RRC_CONNECTED
UEs is less than the UeNumLowThd parameter value; (2) The resource- NO
insufficiency-induced RRC connection rejection rate is less than the
RrcRejectRateLowThd parameter value; (3) The number of RRC
connection setup requests is less than the RrcReqNumLowThd
parameter value.
Indicates the RRC_CONNECTED UE number threshold used to
determine whether to start UMTS and LTE unified overload control.
NO
UMTS and LTE unified overload control starts when the number of
RRC_CONNECTED UEs is greater than this parameter value.
Indicates the threshold of the RRC_CONNECTED UE number, which is
used to determine whether to stop UMTS and LTE unified overload
control. UMTS and LTE unified overload control stops if all of the
following conditions are met: (1) The number of RRC_CONNECTED
UEs is less than the UeNumLowThd parameter value; (2) The resource- NO
insufficiency-induced RRC connection rejection rate is less than the
RrcRejectRateLowThd parameter value; (3) The number of RRC
connection setup requests is less than the RrcReqNumLowThd
parameter value.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 3 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 22 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 23 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 24 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 25 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 26 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 27 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 28 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 29 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 30 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 31 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 32 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 33 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 34 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 35 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 36 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 37 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 38 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 39 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 40 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 41 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 42 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 43 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 44 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 45 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 46 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 47 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 48 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 49 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 50 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 51 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 52 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 53 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 54 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 55 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 56 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 57 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 58 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 59 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 60 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 61 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 62 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 63 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 64 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 65 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 66 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 67 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 68 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 69 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved U32 parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 2 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved U32 parameter 3 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 4 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 5 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 6 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 7 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U32 parameter 8 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 1 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 2 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 3 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved U16 parameter 4 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 5 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 6 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 7 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 8 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 9 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 10 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 11 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 12 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved U16 parameter 13 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 14 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 15 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved U16 parameter 16 that is reserved for future

requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved U8 parameter 1 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 2 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 3 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 4 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 5 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 6 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 7 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 8 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 9 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 10 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 11 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 12 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 13 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 14 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 15 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 16 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 17 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 18 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 19 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 20 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 21 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 22 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 23 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 24 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 25 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 26 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 27 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 28 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 29 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 30 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 31 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.
Indicates reserved U8 parameter 32 that is reserved for future
requirements. Note on parameter replacement: Reserved parameters
are temporarily used in patch versions and will be replaced with new NO
parameters. For example, the ID of a new parameter can signify the
parameter function. Therefore, avoid using this parameter.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the switch used to enable or disable inter-RAT joint shutdown.

NO
This parameter applies only to LTE FDD.

Indicates the start time of inter-RAT cell shutdown. If the switch for inter-
RAT cell shutdown is turned on, inter-RAT cell shutdown can be
NO
performed during the period specified by the start time and stop time of
inter-RAT cell shutdown.
Indicates the stop time of inter-RAT cell shutdown. If the stop time is
earlier than or the same as the start time, the stop time is assumed to be
the time of the next day. If the switch for inter-RAT cell shutdown is NO
turned on, inter-RAT cell shutdown can be performed during the period
specified by the start time and stop time of inter-RAT cell shutdown.

Indicates the UE number threshold for the E-UTRAN cell to enter the
inter-RAT co-coverage cell shutdown. In inter-RAT cell shutdown, the
eNodeB automatically hands over or redirects the UEs in the E-UTRAN
cell to a co-coverage neighboring UTRAN cell when related conditions
are met: (1) The inter-RAT cell shutdown switch is enabled, the
ShutDownType parameter is set to BY_UTRAN_WITHOUT_LOAD, the
shutdown conditions including the specified inter-RAT cell shutdown
duration and uplink and downlink resource block (RB) usages in the E-
UTRAN cell are met, and the number of UEs served by the E-UTRAN
cell is less than or equal to this parameter value. (2) The inter-RAT cell
NO
shutdown switch is enabled, the ShutDownType parameter is set to
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD,
the shutdown conditions including the specified inter-RAT cell shutdown
duration, uplink and downlink RB usages in the E-UTRAN cell,
allocation/retention priorities (ARPs) of services in the E-UTRAN cell,
and load status of the neighboring UTRAN cell are met, and the number
of UEs served by the E-UTRAN cell is less than or equal to this
parameter value. After all UEs in the E-UTRAN cell are transferred to the
neighboring UTRAN cell, the eNodeB shuts down the carrier of the E-
UTRAN cell. This parameter applies only to LTE FDD.

In inter-RAT cell shutdown, the eNodeB automatically hands over or

redirects the UEs in the E-UTRAN cell to a co-coverage neighboring
UTRAN cell when related conditions are met: (1) The inter-RAT cell
shutdown switch is enabled, the ShutDownType parameter is set to
BY_UTRAN_WITHOUT_LOAD, the shutdown conditions including the
specified inter-RAT cell shutdown duration and the number of UEs
served by the E-UTRAN cell are met, and uplink and downlink resource
block (RB) usages in the E-UTRAN cell are less than or equal to the
UlPrbThd and DlPrbThd parameter values, respectively. (2) The inter-
RAT cell shutdown switch is enabled, the ShutDownType parameter is
NO
set to BY_UTRAN_WITH_LOAD or
BY_UTRAN_AND_GERAN_WITH_LOAD, the shutdown conditions
including the specified inter-RAT cell shutdown duration, the number of
UEs served by the E-UTRAN cell, allocation/retention priorities (ARPs) of
services in the E-UTRAN cell, and load status of the neighboring UTRAN
cell are met, and uplink and downlink resource block (RB) usages in the
E-UTRAN cell are less than or equal to the UlPrbThd and DlPrbThd
parameter values, respectively. After all UEs in the E-UTRAN cell are
transferred to the neighboring UTRAN cell, the eNodeB shuts down the
carrier of the E-UTRAN cell. This parameter applies only to LTE FDD.
Indicates the uplink resource block (RB) usage threshold for the E-
UTRAN cell to enter inter-RAT co-coverage cell shutdown mode. In inter-
RAT cell shutdown, the eNodeB automatically hands over or redirects
the UEs in the E-UTRAN cell to a co-coverage neighboring UTRAN cell
when related conditions are met: (1) The inter-RAT cell shutdown switch
is enabled, the ShutDownType parameter is set to
BY_UTRAN_WITHOUT_LOAD, the shutdown conditions including the
specified inter-RAT cell shutdown duration and the number of UEs
served by the E-UTRAN cell are met, and uplink and downlink resource
block (RB) usages in the E-UTRAN cell are less than or equal to the
UlPrbThd and DlPrbThd parameter values, respectively. (2) The inter-
NO
RAT cell shutdown switch is enabled, the ShutDownType parameter is
set to BY_UTRAN_WITH_LOAD or
BY_UTRAN_AND_GERAN_WITH_LOAD, the shutdown conditions
including the specified inter-RAT cell shutdown duration, the number of
UEs served by the E-UTRAN cell, allocation/retention priorities (ARPs) of
services in the E-UTRAN cell, and load status of the neighboring UTRAN
cell are met, and uplink and downlink resource block (RB) usages in the
E-UTRAN cell are less than or equal to the UlPrbThd and DlPrbThd
parameter values, respectively. After all UEs in the E-UTRAN cell are
transferred to the neighboring UTRAN cell, the eNodeB shuts down the
carrier of the E-UTRAN cell. This parameter applies only to LTE FDD.

Indicates the type of the inter-RAT co-coverage cell shutdown. If this

parameter is set to BY_UTRAN_WITHOUT_LOAD, the eNodeB does
not obtain the load status of the co-coverage neighboring UTRAN cell,
and shuts down the carrier of the E-UTRAN cell based on only the load
status of the E-UTRAN cell. If this parameter is set to
BY_UTRAN_WITH_LOAD, the eNodeB obtains the load status of the co-
coverage neighboring UTRAN cell, and shuts down the carrier of the E-
UTRAN cell based on the load status of both the E-UTRAN cell and the
neighboring UTRAN cell. If this parameter is set to
NO
BY_GERAN_WITH_LOAD, the eNodeB obtains the load status of the
co-coverage neighboring GERAN cell, and shuts down the carrier of the
E-UTRAN cell based on the load status of both the E-UTRAN cell and
the neighboring GERAN cell. If this parameter is set to
BY_UTRAN_AND_GERAN_WITH_LOAD, the eNodeB obtains the load
status of co-coverage neighboring UTRAN and GERAN cells, and shuts
down the carrier of the E-UTRAN cell based on the load status of the E-
UTRAN cell, neighboring UTRAN cell, and neighboring GERAN cell. This
parameter applies only to LTE FDD.

Indicates the allocation/retention priority (ARP) threshold for high-priority

services. If the ShutDownType parameter is set to
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD,
NO
the eNodeB does not shut down the carrier of the E-UTRAN cell when
the cell has a service whose ARP is lower than or equal to this parameter
value. This parameter applies only to LTE FDD.
Indicates the downlink load threshold of a co-coverage neighboring
UTRAN cell for the E-UTRAN cell to enter inter-RAT co-coverage cell
shutdown mode. In inter-RAT cell shutdown, the eNodeB hands over or
redirects UEs in the E-UTRAN cell to a co-coverage neighboring UTRAN
cell when related conditions are met: The inter-RAT cell shutdown switch
is enabled, the ShutDownType parameter is set to
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD,
the shutdown conditions including the specified inter-RAT cell shutdown
NO
duration, the number of UEs served by the E-UTRAN cell, uplink and
downlink RB usages in the E-UTRAN cell, allocation/retention priorities
(ARPs) of services in the E-UTRAN cell are met, and uplink and
downlink load of the neighboring UTRAN cell are less than values of
UtranCellUlLoadThd and UtranCellDlLoadThd, respectively. After all UEs
in the E-UTRAN cell are transferred to the neighboring UTRAN cell, the
eNodeB shuts down the carrier of the E-UTRAN cell. This parameter
applies only to LTE FDD.

Indicates the downlink load offset of a co-coverage neighboring UTRAN

cell for enabling the carrier of the E-UTRAN cell that has been shut
down. A shutdown E-UTRAN cell is enabled when the following
conditions are met: (1) The ShutDownType parameter is set to
NO
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD.
(2) The load of a co-coverage neighboring UTRAN cell is larger than or
equal to the sum of this parameter value and the UtranCellDlLoadThd
parameter value. This parameter applies only to LTE FDD.

Indicates the uplink load threshold of a co-coverage neighboring UTRAN

cell for the E-UTRAN cell to enter inter-RAT co-coverage cell shutdown
mode. In inter-RAT cell shutdown, the eNodeB hands over or redirects
UEs in the E-UTRAN cell to a co-coverage neighboring UTRAN cell
when related conditions are met: The inter-RAT cell shutdown switch is
enabled, the ShutDownType parameter is set to
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD,
the shutdown conditions including the specified inter-RAT cell shutdown
NO
duration, the number of UEs served by the E-UTRAN cell, uplink and
downlink RB usages in the E-UTRAN cell, allocation/retention priorities
(ARPs) of services in the E-UTRAN cell are met, and uplink and
downlink load of the neighboring UTRAN cell are less than values of
UtranCellUlLoadThd and UtranCellDlLoadThd, respectively. After all UEs
in the E-UTRAN cell are transferred to the neighboring UTRAN cell, the
eNodeB shuts down the carrier of the E-UTRAN cell. This parameter
applies only to LTE FDD.

Indicates the uplink load offset of a co-coverage neighboring UTRAN cell

for enabling the carrier of the E-UTRAN cell that has been shut down. A
shutdown E-UTRAN cell is enabled when the following conditions are
met: (1) The ShutDownType parameter is set to
NO
BY_UTRAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD.
(2) The load of a co-coverage neighboring UTRAN cell is larger than or
equal to the sum of this parameter value and the UtranCellUlLoadThd
parameter value. This parameter applies only to LTE FDD.
Indicates the load threshold of a co-coverage neighboring GERAN cell
for the E-UTRAN cell to enter inter-RAT co-coverage cell shutdown
mode. In inter-RAT cell shutdown, the eNodeB shuts down the carrier of
the E-UTRAN cell when related conditions are met: The inter-RAT cell
shutdown switch is enabled, the ShutDownType parameter is set to
NO
BY_GERAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD,
the shutdown conditions including the specified inter-RAT cell shutdown
duration and no UE served by the E-UTRAN cell are met, and the load of
a co-coverage neighboring GERAN cell is less than this parameter
value. This parameter applies only to LTE FDD.

Indicates the load offset of a co-coverage neighboring GERAN cell for

enabling the carrier of the E-UTRAN cell that has been shut down. A
shutdown E-UTRAN cell is enabled when the following conditions are
met: (1) The ShutDownType parameter is set to
NO
BY_GERAN_WITH_LOAD or BY_UTRAN_AND_GERAN_WITH_LOAD.
(2) The load of a co-coverage neighboring GERAN cell is larger than or
equal to the sum of this parameter value and the GeranCellLoadThd
parameter value. This parameter applies only to LTE FDD.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.
Indicates whether TX channel calibration is enabled in a cell with
NO
combined RRUs and four TX antennas.

Indicates the local time to perform periodic TX channel calibration in a

cell with combined RRUs and four TX antennas. This parameter works
together with the TxChnCalPeriod parameter to determine the time to NO
perform periodic TX channel calibration. For details, see descriptions of
the TxChnCalPeriod parameter.
Indicates the interval at which periodic TX channel calibration is
performed in a cell with combined RRUs and four TX antennas. This
parameter works together with the TxChnCalTime parameter to
determine the time to perform periodic TX channel calibration. The
following examples clarify the criteria:
(1) If the TxChnCalTime parameter is set to 03:00:00 and the
TxChnCalPeriod parameter is set to 48 (indicating that the TX channel
calibration period is 24 hours), periodic TX channel calibration is
performed at 03:00:00 every day. NO
(2) If the TxChnCalTime parameter is set to 03:00:00 and the
TxChnCalPeriod parameter is set to 24 (indicating that the TX channel
calibration period is 12 hours), periodic TX channel calibration is
performed at 03:00:00 and 15:00:00 every day.
(3) If the TxChnCalTime parameter is set to 03:00:00 and the
TxChnCalPeriod parameter is set to 96 (indicating that the TX channel
calibration period is 48 hours), periodic TX channel calibration is
performed at 03:00:00 every other day.

Indicates the horizontal distance between two combined physical

antennas. The horizontal distance is used for TX channel calibration in a NO
cell with combined RRUs.
Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB. This parameter applies only to FDD cells.

Indicates the SFN cell ID in a super combined cell. This parameter value
must be set based on global network planning. This parameter applies NO
only to FDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the start location of resource blocks (RBs) in UL Refarming

NO
Zero Bufferzone.This parameter applies only to LTE FDD cells.

Indicates the end location of resource blocks (RBs) in UL Refarming

NO
Zero Bufferzone.This parameter applies only to LTE FDD cells.

Indicates the uplink physical resource block (PRB) threshold in UL

Refarming Zero Bufferzone.This parameter applies only to LTE FDD NO
cells.

Indicates the uplink physical resource block (PRB) offset in UL

Refarming Zero Bufferzone.This parameter applies only to LTE FDD NO
cells.

Indicates the reference signal received power (RSRP) threshold used for
UE location determination in UL Refarming Zero Bufferzone.This NO
parameter applies only to LTE FDD cells.

Indicates the reference signal received power (RSRP) offset used for UE
location determination in UL Refarming Zero Bufferzone.This parameter NO
applies only to LTE FDD cells.
Indicates the threshold for stopping inter-RAT event B1 measurements in
UL Refarming Zero Bufferzone.This parameter applies only to LTE FDD NO
cells.

Indicates the received signal code power (RSCP) reporting threshold in

UL Refarming Zero Bufferzone.This parameter applies only to LTE FDD NO
cells.

Indicates the period of inter-RAT event B1 measurements in UL

Refarming Zero Bufferzone.This parameter applies only to LTE FDD NO
cells.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the interval that an eNodeB adjusts Sounding resources, this

NO
parameter applies only to LTE TDD cells.

Indicates the threshold for the eNodeB to determine whether the UpPTS
interference is severe. If the UpPTS interference is greater than or equal
to the value of this parameter, the eNodeB determines the interference is
severe. Low interference and medium interference can be determined
based on the values of this parameter and the Test Hysteresis
parameter. If the UpPTS interference is smaller than the difference
NO
between the value of Test Threshold and Test Hysteresis, the eNodeB
determines the interference is low. If the UpPTS interference is greater
than or equal to the difference between the value of Test Threshold and
Test Hysteresis and smaller than the value of Test Threshold, the
eNodeB determines the interference is medium, this parameter applies
only to LTE TDD cells.
Indicates the hysteresis for an eNodeB to determine the UpPTS
interference. This parameter can be used to reduce the ping-pong effect
due to interference fluctuation. Low interference and medium
interference can be determined based on the values of this parameter
and the Test Threshold parameter. If the UpPTS interference is smaller
than the difference between the value of Test Threshold and Test NO
Hysteresis, the eNodeB determines the interference is low. If the UpPTS
interference is greater than or equal to the difference between the value
of Test Threshold and Test Hysteresis and smaller than the value of Test
Threshold, the eNodeB determines the interference is medium, this
parameter applies only to LTE TDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the downlink user throughput threshold 0. If the downlink user

throughput falls into the interval [0, Downlink User Throughput Threshold NO
0), the data rate is considered in the interval of Index0.

Indicates the downlink user throughput threshold 1. If the downlink user

throughput falls into the interval [Downlink User Throughput Threshold 0,
NO
Downlink User Throughput Threshold 1), the data rate is considered in
the interval of Index1.
Indicates the downlink user throughput threshold 2. If the downlink user
throughput falls into the interval [Downlink User Throughput Threshold 1,
NO
Downlink User Throughput Threshold 2), the data rate is considered in
the interval of Index2.
Indicates the downlink user throughput threshold 3. If the downlink user
throughput falls into the interval [Downlink User Throughput Threshold 2,
NO
Downlink User Throughput Threshold 3), the data rate is considered in
the interval of Index3.
Indicates the downlink user throughput threshold 4. If the downlink user
throughput falls into the interval [Downlink User Throughput Threshold 3,
NO
Downlink User Throughput Threshold 4), the data rate is considered in
the interval of Index4.

Indicates the access delay threshold of uplink services initiated by UEs

in idle mode, which is used to determine whether the access delay is NO
good.

Indicates the access delay threshold of uplink services initiated by UEs

in idle mode, which is used to determine whether the access delay is NO
poor.

Indicates the access delay threshold of downlink services initiated by

UEs in idle mode, which is used to determine whether the access delay NO
is good.
Indicates the access delay threshold of downlink services initiated by
UEs in idle mode, which is used to determine whether the access delay NO
is poor.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

If the switch is off, the eNodeB instructs UEs to use the contention-based
random access mode upon downlink data arrivals in the case of out-of-
synchronization.
MaksIdxSwitch: Indicates the switch used to control reuse of dedicated
preambles between UEs. If the switch is on, the eNodeB enables reuse
of dedicated preambles among UEs based on the MaskIndex parameter.
If the switch is off, the eNodeB allocates a dedicated preamble to only
one UE at a time.
BackOffSwitch: Indicates whether to enable backoff control. If the switch
is on, backoff control is enabled. If the switch is off, backoff control is
disabled.
UeRaInforInqSwitch: Indicates whether the query of UE random access
information is enabled. If this switch is on, the query of UE random
access information is enabled, and the eNodeB sends the
UEInformationRequest message to the UE complying with 3GPP
Release 9 and later and requires the UE reporting random access
information. The eNodeB uses the reported random access information
for RACH resource adjustment. If this switch is off, the query of UE
random access information is disabled. The eNodeB uses the self- NO
collected random access information for RACH resource adjustment.
PRACHFalseAlarmDetSwitch: Indicates whether to enable PRACH false
alarm detection. If this switch is on and the PrachFalseAlarmDetRadThd
or RachThdBoostRatio parameter is not set to off, PRACH false alarm
detection is enabled. If the eNodeB considers the initial contention-
based preamble sent by a UE as a PRACH false alarm, the eNodeB
does not send the UE a Random Access Response message, nor
records the preamble on the performance counter L.RA.GrpA.Att or
L.RA.GrpB.Att if the preamble belongs to group A or B, respectively. If
this switch is on and the PrachFalseAlarmDetRadThd and
RachThdBoostRatio parameters are set to off, PRACH false alarm
detection is disabled. If this switch is off, PRACH false alarm detection is
disabled.
RachPwrAdjSwitch: Indicates whether to enable power adjustment for
the RACH. If both this switch and UeRaInforInqSwitch are on, the
eNodeB dynamically adjusts the parameters related to power control for
the RACH based on the number of random access preambles,
probability of successful random accesses, and target probability of
Indicates the switch used to enable or disable change in the cell-specific
SRS subframe configuration (that is, the adjustment on the setting of the
SrsSubframeCfg parameter).
If the switch is on, the algorithm dynamically adjusts the SRS subframe NO
configuration based on the usage of cell resources.
If the switch is off, the algorithm uses the initial configuration and does
not perform dynamic switching.
PucchSwitch: Indicates whether to enable the PUCCH resource
adjustment algorithm.
If this option is selected, PUCCH resource adjustment is initiated when
the PUCCH resources are insufficient or excessive.
If this option is not selected, PUCCH resource adjustment is disabled.
PucchFlexCfgSwitch: Indicates whether to enable PUCCH flexible
configuration. This function does not take effect if an LBBPc is used or
the cell bandwidth is 1.4 or 3 MHz. When PUCCH flexible configuration NO
is enabled, frequency-domain uplink ICIC and uplink frequency hopping
scheduling cannot be used. If this option is selected, an equal number of
RBs (specified by the PucchExtendedRBNum parameter) are separately
added to both ends of the uplink band allocated for the PUCCH. The
total number of extension PUCCH RBs equals to the
PucchExtendedRBNum parameter value multiplied by two. This
parameter applies only to LTE FDD cells.

Indicates the switch that is used to enable and disable the Active Queue
Management (AQM) algorithm. If this switch is set to ON, the AQM
function is enabled to prevent or control congestion. The length of the
NO
PDCP packet queue is maintained at a relatively small value to help
achieve an appropriate trade-off between throughput and time latency. If
this switch is set to OFF, the AQM function is disabled.
of DlEnVarIblerTargetSwitch.
TddBundlingCqiAdjOptSwitch: Indicates whether to use optimized CQI
adjustment algorithm in ACK bundling mode.
If this switch is On, the optimized CQI adjustment algorithm is used.
If this switch is off, the optimized CQI adjustment algorithm cannot be
used.
TddMultiplexingCqiAdjOptSwitch: Indicates whether to use the optimized
CQI adjustment algorithm in ACK multiplexing mode.
If this switch is On, the optimized CQI adjustment algorithm is used.
If this switch is off, the optimized CQI adjustment algorithm cannot be
used.
AdaptiveStepVarySwitch: Indicates whether to enable adaptive step
change in CQI adjustment.
If this switch is On, significant changes in the signal quality can be
detected, and the CQI adjustment is performed at a large step,
accelerating the IBLER convergence.
If this switch is off, the CQI adjustment is performed at a fixed step.
DlCqiAdjDeltaOptSwitch: Indicates whether to enable optimization on
downlink CQI adjustment. If this switch is off, the CQI adjustment is NO
calculated based on the following formula: CQI adjustment = (Number of
ACKs for initial transmissions x CQI adjustment per ACK + Number of
NACKs for initial transmissions x CQI adjustment per NACK)/(Number of
NACKs for initial transmissions + Number of ACKs for initial
transmissions). If this switch is On, the CQI adjustment is calculated
based on the following formula: CQI adjustment = Number of ACKs for
initial transmissions x CQI adjustment per ACK + Number of NACKs for
initial transmissions x CQI adjustment per NACK).
DlEnVarIblerTargetSwitch: Indicates whether to enable enhanced
downlink target IBLER adaption. If this switch is On, the downlink target
IBLER is adaptively adjusted based on CQI fluctuation and TB size. If
this switch is off, the downlink target IBLER policy is controlled by
DlVarIBLERtargetSwitch. This switch applies only to FDD cells.
DlRetxTbsIndexAdjOptSwitch: Indicates whether to enable transport
block size (TBS) index adjustment optimization in retransmissions.
If this switch is On, TBS index adjustment optimization in retransmissions
is enabled. The TBS index is lowered for the scheduling of the last two
retransmissions, and the TBS index is determined based on the CQI
Indicates the switch used to enable or disable dynamic power
adjustment. If this switch is on, the power amplifier (PA) working voltage
is adjusted based on the load of the eNodeB, which reduces power
NO
consumption of the PA and improves energy efficiency of the eNodeB.
Dynamic power adjustment applies only to FDD cells with a bandwidth
no less than 5 MHz.
calculation of the QoS satisfaction rate of services with different QCIs,
the satisfaction estimation method used dedicated for VoIP services is
implemented on services with the QCI of 1. If a service with the QCI of 1
is not a VoIP service, the satisfaction rate calculated using this method is
lower than the actual value, which affects the admission of GBR
services. Therefore, if not all the services with the QCI of 1 are VoIP
services, it is recommended that this switch be off.
DlPredictSwitch: Indicates whether to enable the algorithm of downlink
admission control based on prediction. If this switch is on, the algorithm
is enabled. If this switch is off, the algorithm is disabled.
UlPredictSwitch: Indicates whether to enable the algorithm of uplink
admission control based on prediction. If this switch is on, the algorithm
is enabled. If this switch is off, the algorithm is disabled.
GbrUsageSwitch: Indicates whether to enable the check on the number
of PRBs used by GBR services. If this switch is on, the number of PRBs
used by existing GBR services is checked before a new GBR service
can be admitted. If this switch is off, the number of PRBs used by
existing GBR services is not checked during admission evaluation of
new GBR services NO
DlLdcSwitch: Indicates whether to implement load control in the downlink
of a cell. If this switch is on, the system checks for congestion in the
downlink of the cell. If the downlink is congested, load control is
performed. If this switch is off, the system does not check for congestion
in the downlink of the cell and the congestion cannot be relieved. During
the calculation of the QoS satisfaction rate of services with different
QCIs, the satisfaction estimation method used dedicated for VoIP
services is implemented on services with the QCI of 1. If a service with
the QCI of 1 is not a VoIP service, the satisfaction rate calculated using
this method is lower than the actual value, which affects the cell load
control. Therefore, if not all the services with the QCI of 1 are VoIP
services, it is recommended that this switch be off.
UlLdcSwitch: Indicates whether to implement load control in the uplink of
a cell. If this switch is on, the system checks for congestion in the uplink
of the cell. If the uplink is congested, load control is performed. If this
switch is off, the system does not check for congestion in the uplink of
the cell and the congestion cannot be relieved. During the calculation of
the QoS satisfaction rate of services with different QCIs, the satisfaction
MLB to GERAN, MLB to CDMA2000, MLB based on PRB evaluation,
and MLB based on neighboring cell load status. If one switch is on, the
corresponding algorithm is enabled to balance the loads between the
serving cell and neighboring cells of the specified category.
IntraFreqMlbSwitch: Indicates whether to enable intra-frequency load
balancing. If this switch is on, intra-frequency load balancing is enabled
and IntraFreqIdleMlbSwitch takes effect. If this switch is off, intra-
frequency load balancing is disabled and IntraFreqIdleMlbSwitch does
not take effect.
InterFreqMlbSwitch: Indicates whether to enable inter-frequency load
balancing.
UtranMlbSwitch: Indicates whether to enable load sharing with UTRAN
cells.
GeranMlbSwitch: Indicates whether to enable load sharing with GERAN
cells.
CdmaMlbSwitch: Indicates whether to enable load sharing with
CDMA2000 cells.
IntraFreqIdleMlbSwitch: If both IntraFreqIdleMlbSwitch and
IntraFreqMlbSwitch are on, intra-frequency load balancing for UEs in idle
NO
mode is enabled. Otherwise, intra-frequency load balancing for UEs in
idle mode is disabled.
UtranIdleMlbSwitch: Indicates whether to enable load sharing with
UTRAN for UEs in idle mode.
MlbLoadInfoSwitch: Indicates whether load of an inter-RAT cell is
considered when the load sharing between the E-UTRAN cell and the
inter-RAT cell is performed. This inter-RAT cell must be a UTRAN cell in
this version. If both MlbLoadInfoSwitch and UtranMlbSwitch are on, the
UTRAN cell whose load status is obtained and is normal or medium can
be selected as the candidate cell for load sharing with UTRAN. If both
MlbLoadInfoSwitch and UtranIdleMlbSwitch are on, the UTRAN cell
whose load status is obtained and is normal can be selected as the
candidate cell for load sharing with UTRAN.
InterFreqBlindMlbSwitch: Indicates whether to enable the inter-frequency
blind load balancing.
PrbValMlbSwitch: Indicates whether to enable PRB-evaluation-based
load balancing among devices of different vendors. PRB-evaluation-
based load balancing among devices of different vendors is enabled only
when this switch is on. This parameter is valid only for LTE TDD cells.
Indicates the switches used to enable or disable power control for
PDSCH, PDCCH, and PHICH.
PdschSpsPcSwitch: Indicates the switch for power control during semi-
persistent scheduling on the PDSCH. If the switch is off, power is
allocated evenly during semi-persistent scheduling on the PDSCH. If the
switch is on, power control is applied during semi-persistent scheduling
on the PDSCH, ensuring communication quality (indicated by IBLER) of
VoIP services in the QPSK modulation scheme.
PhichInnerLoopPcSwitch: Indicates the switch for PHICH inner-loop
power control. If the switch is off, only the initial transmit power for the
PHICH is set. If the switch is on, the eNodeB controls the physical
channel transmit power to enable the receive SINR to converge to the
target SINR.
PdcchPcSwitch: Indicates the switch for PDCCH power control. If the
switch is off, power is allocated evenly to PDCCH. If the switch is on,
power allocated to PDCCH is adjusted dynamically.
EDlMaxTXPwrSwitch: Indicates the switch for enhanced maximum TX
NO
power of the cell. If this switch is off, the maximum TX power of the cell is
determined by the reference signal (RS) power and the scaling factor
indexes Pa and Pb. If this switch is on, the maximum TX power of the
cell can be increased to improve the RB usage in the cell. This switch
has no impact on the TDD 20M, TDD 15HMz and 10M cell.
BFModeUserPwrSwitch: Specifies whether to turn on the UE power
optimization switch in BF mode. If the BFModeUserPwrSwitch check box
is cleared, BF UEs adopt the existing power allocation principle. If the
BFModeUserPwrSwitch check box is selected, the eNodeB increases
the BF UE power based on the configured power headroom. This switch
applies only to LTE TDD networks.
SigPowerIncreaseSwitch: Indicates the switch controlling signaling
power improvement. If this switch is off, the signaling is transmitted using
the original power during network entry. If this switch is on, the PDSCH
transmit power increases when scheduling is performed for downlink
retransmission of signaling during network entry. This switch applies only
to LTE TDD networks.
power control for the PUSCH in dynamic scheduling mode is enabled
only when this switch is on. PhSinrTarUpdateSwitch: None.
InnerLoopPucchSwitch: Indicates whether to enable inner-loop power
control for the PUCCH. Inner-loop power control for the PUCCH is
enabled only when this switch is on. OiSinrTarUpdateSwitch: None.
PowerSavingSwitch: None. CloseLoopOptPUSCHSwitch: Indicates
whether to enable the optimization on closed-loop power control for the
PUSCH in dynamic scheduling mode. This parameter applies only to
LTE TDD cells. PucchPcDtxSinrSwitch: Indicates whether the eNodeB
processes the measured uplink SINR in the DTX state when the PUCCH
DTX is detected. If this switch is off, the eNodeB does not process the
measured uplink SINR in the DTX state when the PUCCH DTX is
detected. If this switch is on, the eNodeB processes the measured uplink
SINR even when PUCCH DTX is detected, generates power control
commands based on the SINR, and delivers the power control
commands to UEs. PuschIoTCtrlSwitch: Indicates whether to enable
interference control in closed-loop power control for the PUSCH in
dynamic scheduling mode. Interference control in closed-loop power
control for the PUSCH in dynamic scheduling mode is enabled only NO
when this switch is on. SrsPcSwitch: Indicates whether to enable SRS
power control adjustment. SRS power control adjustment is enabled only
when this switch is on. This switch applies only to LTE TDD.
NearPointUeOptPUSCHSwitch: Indicates whether to apply optimized
closed-loop power control for the PUSCH to UEs near the cell center.
The optimization helps UEs near the cell center to avoid unnecessary
power lowering due to inter-RAT or abrupt interference. If this switch is
on, optimized closed-loop power control for the PUSCH is applied to UEs
near the cell center. If this switch is off, optimized closed-loop power
control for the PUSCH is not applied to UEs near the cell center. This
switch applies only to LTE FDD cells. PuschRsrpHighThdSwitch:
Indicates whether closed-loop power control for the PUSCH limits the
maximum value of RSRP. If this switch is off, closed-loop power control
for the PUSCH does not limit the maximum value of RSRP. If this switch
is on, the maximum value of RSRP cannot exceed the RSRP value
specified by the PuschRsrpHighThd parameter in the CellAlgoSwitch in
this version. This switch applies only to LTE FDD cells.
OuterLoopPucchSwitch: Indicates whether to enable outer-loop PUCCH
Indicates the switch that is used to enable or disable the beamforming
algorithm. If the switch is on, UEs in the cell can be served by the
beamforming algorithm. If the switch is off, UEs in the cell cannot be NO
served by the beamforming algorithm. The beamforming algorithm is
disabled by default. It must be enabled manually if required.
scheduling on GBR bearers based on the MBR and GBR. If this switch is
off, the eNodeB performs downlink scheduling on GBR bearers based on
the GBR only.
MbrDlSchSwitch: Indicates whether the eNodeB performs downlink
scheduling based on MBR. If this switch is on, the eNodeB determines
priorities of UEs based on the MBR in downlink scheduling. This
parameter applies only to LTE TDD cells.
UeAmbrDlSchSwitch: Indicates whether the eNodeB performs downlink
scheduling based on the aggregate maximum bit rate (AMBR) of UEs. If
this switch is on, the eNodeB determines priorities of UEs based on the
AMBR of UEs in downlink scheduling. This parameter applies only to
LTE TDD cells.
EpfEnhancedSwitch: Indicates whether to enable enhanced proportional
fair (EPF) for downlink scheduling. EPF for downlink scheduling is
enabled only when this switch is on.
AperiodicCqiTrigOptSwitch: Indicates whether to trigger aperiodic CQI
optimization. If this switch is on, a UE performing initial access triggers
aperiodic CQI reporting based on related triggering conditions after the
DLMAC instance has been established for 200 ms and the eNodeB NO
receives MSG5. Consider that aperiodic CQI reporting is triggered by
invalid CQI reports in eight consecutive CQI reporting periods. If cyclic
redundancy check (CRC) on aperiodic CQI reports fails, aperiodic CQI
reporting is not repeatedly triggered when DRX is enabled; or aperiodic
CQI reporting is triggered after eight TTIs when DRX is disabled. If this
switch is off, a UE performing initial access triggers aperiodic CQI
reporting based on related triggering conditions after the DLMAC
instance has been established for 200 ms. Consider that aperiodic CQI
reporting is triggered by invalid CQI reports in eight consecutive CQI
reporting periods. If CRC on aperiodic CQI reports fails, aperiodic CQI
reporting is triggered after eight TTIs regardless of the DRX status.
VoipTbsBasedMcsSelSwitch: Indicates whether the modulation and
coding scheme (MCS) index is selected based on the transport block
size (TBS) in downlink scheduling for VoIP services. If this switch is on,
the MCS index is selected based on the TBS in downlink scheduling for
VoIP services. If this switch is off, the MCS index is not selected based
on the TBS in downlink scheduling for VoIP services.
UeSigMcsEnhanceSwitch: Indicates whether to enable or disable the
UlEnhancedFssSwitch: Indicates whether to enable uplink load-based
enhanced frequency selection. This switch applies only to FDD cells.
UlIicsAlgoSwitch: Indicates whether to enable the UL IICS algorithm. If
this switch is on, interference can be reduced based on accurate
detection of user attributes and resource scheduling coordination,
thereby increasing the cell edge throughput. This switch applies only to
LTE TDD networks.
UlEnhancedSrSchSwitch: Indicates whether uplink re-scheduling is
performed only when the On Duration timer for the DRX long cycle
starts. Uplink re-scheduling is required if the number of HARQ
retransmissions for a scheduling request (SR) reaches the maximum
value but the scheduling still fails. If this switch is on, uplink re-
scheduling is performed only when the On Duration timer for the DRX
long cycle starts. If this switch is off, uplink re-scheduling is performed
immediately when the number of HARQ retransmissions for SR reaches
the maximum value but the scheduling still fails. It is recommended that
the switch be turned on in live networks.
SchedulerCtrlPowerSwitch: Indicates whether the uplink scheduler
performs scheduling without considering power control restrictions. If this
NO
switch is on, the uplink scheduler performs scheduling without
considering power control restrictions, which ensures full utilization of the
transmit power for all UEs. If this switch is off, the uplink scheduler
considers power control restrictions while performing scheduling, which
prevents full utilization of the transmit power for UEs at far or medium
distances from the cell center.
UlMinGbrSwitch: Indicates whether to enable uplink minimum
guaranteed bit rate (GBR). If this switch is on, the minimum GBR of non-
GBR services is ensured by increasing the scheduling priority of UEs
whose non-GBR service rates are lower than the minimum GBR of GBR
services.
UlMbrCtrlSwitch: Indicates whether to enable uplink scheduling based on
the maximum bit rate (MBR) and guaranteed bit rate (GBR) on the GBR
bearer. If this switch is on, the eNodeB performs uplink scheduling on
GBR bearers based on the MBR and GBR. If this switch is off, the
eNodeB performs uplink scheduling on GBR bearers based only on the
GBR.
MbrUlSchSwitch: Indicates whether the eNodeB performs uplink
scheduling based on MBR. If this switch is on, the eNodeB prioritizes

Indicates whether to enable or disable RAN sharing for admission and

scheduling. If this switch is turned on, operators share data channel NO
resources according to the specified percentages.
Indicates whether to enable frequency-priority-based inter-frequency
handover algorithms. This parameter includes the following options:
FreqPriorIFHOSwitch: Frequency-priority-based inter-frequency
handover is applicable when the two E-UTRAN frequencies provide the
same coverage and one frequency is preferred for carrying services. If
this option is on, the frequency-priority-based inter-frequency handover
will be triggered even when the serving cell provides a good signal
quality. If this option is off, the frequency-priority-based inter-frequency
handover is disabled. The inter-frequency handover can be triggered
only when other conditions are met.
FreqPriorIFBlindHOSwitch: If this option is on, frequency-priority-based
inter-frequency handovers are performed in a blind manner. If this option
is off, frequency-priority-based inter-frequency handovers are performed
based on measurements. This option takes effect only when the
FreqPriorIFHOSwitch option is on.
MlbBasedFreqPriHoSwitch: Indicates whether to enable frequency-
NO
priority-based inter-frequency handovers when load balancing is
triggered. If this option is on, the eNodeB stops performing frequency-
priority-based inter-frequency handovers on UEs that newly access the
cell with load balancing enabled. If this option is off, the eNodeB
continues to perform frequency-priority-based inter-frequency handovers
on UEs that newly access the cell with load balancing enabled. This
option takes effect only when the FreqPriorIFHOSwitch option is on.
A2BasedFreqPriHoSwitch: Indicates whether measurements for
frequency-priority-based handovers are triggered based on event A2. If
this option is on, new UEs (including UEs newly access the cell, UEs
handed over to the cell, and UEs reestablish RRC connections in the
cell) that meet conditions of triggering event A2 perform measurements
on high-priority frequencies. If this option is off, new UEs that meet
conditions of triggering event A1 perform measurements on high-priority
frequencies or perform blind handovers.This option takes effect only
when the FreqPriorIFHOSwitch option is on.
Indicates whether to enable or disable the MUBF algorithm. This
parameter is valid only if the BfSwitch check box is selected under the
BfAlgoSwitch parameter. This parameter applies only to LTE TDD
networks.
MuBfSwitch: If this check box is selected, multi-user pairing in the
downlink is enabled for a cell. If this check box is deselected, multi-user
pairing is disabled.
TM9MuBfSwitch: If this check box, the MuBfSwitch(MuBfSwitch) check
box, and the TM9Switch(TM9Switch) check box under the NO
EnhMIMOSwitch parameter are selected, TM9 multi-user pairing in the
downlink is enabled for a cell. If this check box is deselected, TM9 multi-
user pairing is disabled.
EnhMubfSwitch: If this check box and the MuBfSwitch(MuBfSwitch)
check box are selected, enhanced multi-user pairing in the downlink is
enabled for a cell. If this check box is selected but the
MuBfSwitch(MuBfSwitch) check box is deselected, or if this check box is
deselected, enhanced multi-user pairing is disabled.

Indicates the switch used to enable or disable distance-based

handovers. If this switch is turned on, distance-based handovers are
NO
allowed. If this switch is turned off, distance-based handovers are
prohibited.
Indicates the switch for the access barring algorithm. If this parameter is
set to ACBAR_SWITCH_DYNAMIC, intelligent access barring is
enabled. In this situation, the access probability factors for mobile-
originated data and mobile-originated signaling are dynamically adjusted
based on the cell load. If this parameter is set to
NO
ACBAR_SWITCH_STATIC, static access barring is enabled. In this
situation, the access probability factors and average access barring
durations are configured in the access barring information. If this
parameter is set to ACBAR_SWITCH_DISABLE, access barring is
disabled.

Indicates whether to apply MRC/IRC adaptation to the PUSCH. NO

Indicates the SFN uplink scheduling mode. The uplink scheduling modes
include the joint scheduling mode, and the auto-selection mode between NO
joint scheduling and independent scheduling.

Indicates the SFN downlink scheduling mode. The downlink scheduling

modes include the joint scheduling mode, and the auto-selection mode NO
between joint scheduling and independent scheduling.
Indicates whether to apply MRC/IRC adaptation to the PUCCH/PRACH.
PucchIrcSwitch: If this switch is on, MRC/IRC adaptation applies to the
PUCCH. If this switch is off, MRC applies to the PUCCH. Note that
LBBPc boards do not support MRC/IRC adaptation on the PUCCH.
PrachIrcSwitch:
When the eNodeB is equipped with LBBPc boards and uses one or two
RX antennas, PrachIrcSwitch of the IrcSwitch parameter and the
PrachIntrfRejSwitch parameter together control the interference rejection
technique applied to the PRACH. If the PrachIntrfRejSwitch parameter is
set to off, interference rejection is not applied to the PRACH. When the
NO
PrachIntrfRejSwitch parameter is set to on, PrachIrcSwitch of the
IrcSwitch parameter takes effect: (1) If PrachIrcSwitch is off, MRC is
applied to the PRACH. (2) If PrachIrcSwitch is on, MRC/IRC adaptation
is applied to the PRACH.
If the eNodeB is equipped with LBBPc boards and uses more than two
RX antennas, interference rejection is not supported.
If the eNodeB is equipped with LBBPd or UBBPd boards, the
PrachIntrfRejSwitch parameter setting does not take effect. (1) If
PrachIrcSwitch is off, MRC is applied to the PRACH. (2) If
PrachIrcSwitch is on, MRC/IRC adaptation is applied to the PRACH.

Indicates whether to enable dynamic discontinuous reception (DRX) or

smart DRX. Unlink dynamic DRX and smart DRX apply only to LTE TDD
cells and requires the mobility speed of UEs to be reported.
DynDrxSwitch: If this switch is on, dynamic DRX applies to newly
admitted UEs to reduce signaling overheads or decrease UE power
consumption. If this switch is off, dynamic DRX does not apply to newly
admitted UEs. Dynamic DRX applies to carrier aggregation (CA) UEs
only when this switch is on in both the primary serving cell (PCell) and
NO
secondary serving cell (SCell). SmartDrxSwitch: If this switch is on,
smart DRX applies to newly admitted UEs that support mobility speed
reporting. The eNodeB dynamically sets DRX-related parameters based
on UE mobility speeds. If this switch is off, smart DRX does not apply to
newly admitted UEs. Smart DRX applies to CA UEs only when this
switch is on in both the PCell and SCell. If DynDrxSwitch is on, setting
the DrxAlgSwitch parameter to ON cannot ensure that DRX is enabled
on synchronized UEs.

Indicates whether to enable the high-mobility-triggered-idle switch. When

this parameter is set to ENABLE, UEs in high mobility are released and
enter the idle mode, and therefore the signaling impact on the network NO
caused by frequent handovers are reduced. When this parameter is set
to DISABLED, UEs in high mobility are not released.
Indicates whether to enable the function of avoiding interference from
adjacent GERAN cells. If the AvoidGeranInterfSwitch option is selected,
GL bufferzone optimization is enabled.
Before selecting the switch, pay attention to the following:
1. The cell bandwidth must be changed to its next higher standard
bandwidth level. For example, the bandwidth of a 15 MHz cell must be
changed to 20 MHz.
2. It is recommended that this option be not selected if the bandwidth of
a cell is 1.4, 3, 5, or 10 MHz.
3. To avoid interference from adjacent GERAN cells to the PUCCH, the
PUCCH flexible configuration (specified by the PucchFlexCfgSwitch
option of the PucchAlgoSwitch parameter must be enabled.
NO
When the TddAvoidUpPTSInterfSwitch check box under this parameter
is selected, the UpPTS interference detection and avoidance function is
enabled for LTE TDD cells.
When the AvoidPrachInterfSwitch check box under this parameter is
selected, the PRACH interference avoidance function is enabled for LTE
TDD cells.
When the IntraBandInterfMonitorSwitch:on check box under this
parameter is selected, the in-band interference monitoring function is
enabled for a cell. When the IntraBandInterfMonitorSwitch:off check box
is selected, the in-band interference monitoring function is disabled for a
cell. This parameter is invalid for cells established on LBBPc boards.
This parameter applies only to LTE TDD cells.

Indicates the switch used to enable or disable the GL dynamic power

sharing algorithm. This algorithm can be used when the GSM and LTE
carriers share the same power amplifier. This improves power usage and
service quality of LTE UEs adopting quadrature phase shift keying
NO
(QPSK) as their modulation scheme in case that the GSM and LTE busy
hours appear at different time points or that the traffic is unbalanced.
This parameter indicates the switch for the GL dynamic power sharing
feature at the LTE side.
Indicates whether to enable the TDM-based eICIC algorithm. The TDM-
based eICIC algorithm can be disabled, statically enabled or dynamically
enabled. In a heterogeneous network (HetNet), this parameter is used
together with the range expansion function of the micro base station to NO
expand the coverage of micro cells, and increase the number of users
absorbed by the micro cells. To support TDM-based eICIC, settings of
this parameter in macro and micro cells must be the same.

Indicates the switch used to control whether PUCCH resources are

allocated based on the UL peak rate. If this switch is turned on,
resources are flexibly allocated to PUCCH. When there is only a few NO
UEs, the PUCCH is allocated with less RBs. This maximizes the number
of PUSCH RBs available to each UE.
Indicates the switch used to enable or disable the DL CoMP algorithm. NO

Indicates the switch used to enable or disable the parallel soft

interference cancellation (PSIC) algorithm in a cell.This parameter NO
applies only to LTE FDD cells.
Indicates whether to enable or disable handovers triggered by mobility
load balancing (MLB), based on which the eNodeB determines handover
policies.
If the InterFreqMlbBlindHo check box under this parameter is selected,
the eNodeB performs a blind handover to an intra-RAT inter-frequency
neighboring cell for load balancing. Otherwise, the eNodeB does not
perform the blind handover. If the InterFreqMlbRedirect check box under
this parameter is selected, the eNodeB performs a load-based
redirection to an intra-RAT inter-frequency neighboring cell. Otherwise, NO
the eNodeB does not perform the redirection.
If the InterRatMlbRedirect check box under this parameter is selected,
the eNodeB performs a redirection from an E-UTRAN cell to a UTRAN or
GERAN cell. Otherwise, the eNodeB does not perform the redirection.
If the InterRatMlbBlindHo check box under this parameter is selected,
the eNodeB performs a blind handover from an E-UTRAN cell to a
UTRAN or GERAN cell for load balancing. Otherwise, the eNodeB does
not perform the blind handover.
UlJointReception3CellSwitch is off, and UlHetnetJointReceptionSwitch is
off, intra-BBU intra-site and inter-site UL CoMP is enabled in cloud BB
scenarios, and each UE supports UL CoMP in at most two cells.
If UlJointReceptionSwitch is on, UlJointReceptionPhaseIISwitch is on,
UlJointReception3CellSwitch is on, and UlHetnetJointReceptionSwitch is
off, intra-BBU intra-site and inter-site UL CoMP is enabled in cloud BB
scenarios, and each UE supports UL CoMP in at most three cells.
If UlJointReceptionSwitch is on, UlJointReceptionPhaseIISwitch is on,
UlJointReception3CellSwitch is off, and UlHetnetJointReceptionSwitch is
on, UL CoMP is enabled in HetNet networking, intra-BBU intra-site and
inter-site UL CoMP is enabled in cloud BB scenarios, and each UE
supports UL CoMP in at most two cells.
If UlJointReceptionSwitch is on, UlJointReceptionPhaseIISwitch is on,
UlJointReception3CellSwitch is on, and UlHetnetJointReceptionSwitch is
on, UL CoMP is enabled in HetNet networking, intra-BBU intra-site and
inter-site UL CoMP is enabled in cloud BB scenarios, and each UE
supports UL CoMP in at most three cells.
UlCompRollbackSwitch controls whether a CoMP UE is not selected any
more in UL CoMP and becomes a non-CoMP UE. If this switch is on, the
NO
eNodeB detects signal qualities and interference changes of the serving
and coordinating cells of a CoMP UE in real time. If the eNodeB detects
that the interference from signals of UEs in the coordinating cell cannot
be mitigated using UL CoMP, the eNodeB no longer selects the CoMP
UE in UL CoMP, and the UE becomes a non-CoMP UE. If this switch is
off, the eNodeB always selects the CoMP UE in UL CoMP, and the UE
will never become a non-CoMP UE. This parameter applies only to cells
established on LBBPc boards.
UlJointReception3CellSwitch controls whether three-cell UL CoMP is
enabled in the serving cell. The coordinating cell cannot know whether
itself is involved in three-cell UL CoMP. Assume
UlJointReception3CellSwitch is on for cell A and UlJointReceptionSwitch
is on for cell B. Then, three-cell UL CoMP is enabled in cell A that acts as
the serving cell while three-cell UL CoMP does not need to be enabled in
cell B that acts as a coordinating cell. This switch applies only to FDD
cells.
UlHetnetCompManualNcellCfgSw: If this option is deselected, the
measurement neighboring cell set of this macro cell or the macro cell to
which this micro cell belongs is dynamically obtained. If this option is

Indicates the switch used to enable or disable the antenna calibration

algorithm. This parameter applies only to TDD cells. If this switch is on,
the virtual antenna mapping (VAM) performance of two groups of 4T
NO
cross-polarized antennas is improved. If this switch is off, the antenna
calibration algorithm is disabled. It is recommended that this switch be
on for two groups of 4T cross-polarized antennas.

Indicates whether to enable dynamic spectrum sharing in the E-UTRAN

cell. If the GLDynSpectrumShareSwitch option is on, GSM and LTE
dynamic spectrum sharing is enabled. Parameters
HighFreqShareRbNum and LowFreqShareRbNum must be set before
NO
GSM and LTE dynamic spectrum sharing is enabled. In GSM and LTE
dynamic spectrum sharing, the idle GERAN spectrum can be used by
the E-UTRAN cell, thereby increasing the bandwidth and throughput of
the E-UTRAN cell.
Indicates whether to enable load-based adaptive adjustment in the
adaptive SFN/SDMA feature. If this switch is turned on, load-based
adaptive adjustment is enabled, which increases the proportion of joint-
scheduling UEs and improves user experience when the network load is
light, and increases the proportion of independent-scheduling UEs and NO
ensures the spectral efficiency when the network load is heavy. If this
switch is turned off, load-based adaptive adjustment in the adaptive
SFN/SDMA feature cannot be enabled. This switch applies only to LTE
TDD cells.
Indicates the interference rejection combining (IRC) algorithm applied to
the PUSCH. This parameter includes the following switches:
MrcIrcAdptSwitch: Indicates whether to apply MRC/IRC adaptation on
the PUSCH.
SmartIrcSwitch: Indicates whether to apply enhanced 8R IRC algorithm
to the PUSCH. This switch applies only to 8R and 4R CoMP scenarios in
TDD macro eNodeBs.
MrcIrcAdaptivefor2R: Indicates whether to apply MRC/IRC adaptation on
the PUSCH in 2R scenarios. This switch takes effect only when
MrcIrcAdptSwitch is on. If MrcIrcAdaptivefor2R is on, IRC is applied to
the PUSCH in 2R scenarios. If MrcIrcAdaptivefor2R is off, MRC/IRC
adaptation is applied to the PUSCH in 2R scenarios.
In 2R cells established on LBBPc boards: If MrcIrcAdptSwitch is on, IRC
applies to the PUSCH. If MrcIrcAdptSwitch is off, MRC applies to the NO
PUSCH.
In 2R cells established on LBBPd boards: The setting of
MrcIrcAdaptivefor2R takes effect only when MrcIrcAdptSwitch is on. If
MrcIrcAdptSwitch and MrcIrcAdaptivefor2R are on, MRC/IRC adaptation
applies to the PUSCH. If MrcIrcAdptSwitch is on and
MrcIrcAdaptivefor2R is off, IRC applies to the PUSCH. If
MrcIrcAdptSwitch is off, MRC applies to the PUSCH.
In 2R cells established on the UBBP boards: If MrcIrcAdptSwitch is on,
MRC/IRC adaptation applies to the PUSCH. If MrcIrcAdptSwitch is off,
MRC applies to the PUSCH.
In 4R cells established on the LBBPc, LBBPd, or UBBP boards: If
MrcIrcAdptSwitch is on, MRC/IRC adaptation applies to the PUSCH. If
MrcIrcAdptSwitch is off, MRC applies to the PUSCH.

Indicates whether to enable or disable adaptive dedicated cell

reselection priority. If this parameter is set to 1, the eNodeB delivers the
dedicated cell reselection priority to a UE when the following conditions
are met: (1) The UE requests to set up an RRC connection with the
cause value being mo-Signalling. (2) The MME instructs the eNodeB to NO
release the S1 bearer. (3) The eNodeB fails to obtain the UE capability. If
this switch is turned off, the eNodeB does not deliver dedicated cell
reselection priority to a UE even if the eNodeB fails to obtain the UE
capability information.
If this switch is selected, one of the working RF modules of a UE is
selected to receive L2 data of this UE.
If this switch is deselected, the target RF module of a UE is selected to
receive L2 data of this UE.
SfnPdcchSdmaSwitch: Indicates whether to enable SDMA-based
transmission of PDCCH data in an SFN cell. This parameter applies only
to LTE TDD cells.
If this switch is selected, SDMA-based transmission of PDCCH data is
enabled when the adaptive SFN/SDMA feature is enabled.
If this switch is deselected, joint transmission or selective transmission of
PDCCH data is enabled when the adaptive SFN/SDMA feature is
enabled.
SfnPucchAckSdmaSwitch: Indicates whether to enable SDMA-based
transmission and reception of dynamic ACK on the PUCCH in an SFN
cell. This parameter applies only to LTE TDD cells.
If this switch is selected, SDMA-based transmission and reception of
dynamic ACK on the PUCCH is enabled when the adaptive SFN/SDMA
feature is enabled.
If this switch is deselected, SDMA-based transmission and reception of
NO
dynamic ACK on the PUCCH is disabled when the adaptive SFN/SDMA
feature is enabled.
SuperCombCellSwitch: Indicates whether to enable the super
combination cell feature.
If this switch is selected, the super combination cell feature is enabled.
If this switch is deselected, the super combination cell feature is
disabled.
SfnDl2LoadLevelAdptSwitch: Indicates whether to enable downlink
adaptive adjustment based on two load levels in an SFN cell. This
parameter applies only to LTE TDD cells.
If this switch is selected, downlink adaptive adjustment in adaptive
SFN/SDMA scenarios is performed based on two load levels.
If this switch is deselected, downlink load-based adaptive adjustment in
adaptive SFN/SDMA scenarios does not differentiate high and low loads.
SfnDlSchAttriAdjsSwitch: Indicates whether to enable downlink
scheduling attribute adjustment in an SFN cell.
If this switch is selected, scheduling attribute adjustment is enabled
during downlink scheduling in adaptive SFN/SDMA scenarios.
If this switch is deselected, scheduling attribute adjustment is disabled
Indicates whether to suppress interference on the PRACH. This
parameter takes effect only on the eNodeB uses the LBBPc and one or
two RX antennas. If this parameter is set to OFF, the interference on the
PRACH is not suppressed. If this parameter is set to ON, the
PrachIrcSwitch option of the IrcSwitch parameter takes effect. If the
NO
PrachIrcSwitch option of the IrcSwitch parameter is cleared, interference
on the PRACH is suppressed based on the maximum ratio combining
(MRC). If the PrachIrcSwitch option of the IrcSwitch parameter is
selected, interference on the PRACH is suppressed based on the
interference rejection combining (IRC).

Indicates whether to enable enhanced MIMO. This parameter now

includes one switch. TM9Switch: Indicates whether accessing UEs are
allowed to enter TM9 mode. Accessing UEs are allowed to enter the TM9 NO
mode only when this switch is on. This parameter does not apply to cells
established on the LBBPc.
Indicates the interference randomization algorithm applied to TDD and
FDD eNodeBs.
If this parameter is set to OFF, the interference randomization algorithm
is disabled.
If this parameter is set to ECO_BASED, the eCoordinator-based
NO
interference randomization algorithm is enabled, which applies only to
TDD eNodeBs.
If this parameter is set to ENB_BASED, the eNodeB-based interference
randomization algorithm is enabled, which applies to both TDD and FDD
eNodeBs.

Indicates the type of reference signal (RS) power to be delivered in

system information block type 2 (SIB2). If the AntRsPwrSwitch is
selected, the RS power calculated based on the AntOutputPwr
NO
parameter value is delivered in SIB2. If the AntRsPwrSwitch is not
selected, the RS power specified by the ReferenceSignalPwr parameter
is delivered in SIB2.This parameter applies only to LTE FDD cells.
Indicates whether to prioritize frequencies in a multi-frequency network.
FixedMeasObjIDSwitch: Indicates whether the eNodeB maps each
neighboring frequency to a MeasObjectID based on the frequency
measurement priorities. If this switch is on, the eNodeB maps each
neighboring frequency to a corresponding MeasObjectID based on the
frequency measurement priorities. A higher-priority frequency is mapped
to a smaller MeasObjectID. If this switch is off, the eNodeB does not
map neighboring frequencies to MeasObjectIDs based on the frequency
measurement priorities. VoipMeasFreqPriSwitch: Indicates whether the
NO
frequency priority specified by the VoipPriority parameter takes effect
during coverage-based handovers for VoIP UEs. If this switch is on, the
eNodeB only delivers the highest-priority intra-RAT frequencies different
from the serving frequency based on the settings of the VoipPriority
parameter when the eNodeB delivers the measurement configurations to
VoIP UEs for coverage-based inter-frequency handovers. If this switch is
off, the eNodeB does not consider the settings of the VoipPriority
parameter when delivering the measurement configurations to VoIP UEs
for coverage-based inter-frequency handovers.
Indicates whether to enable or disable HARQ-related algorithms. If the
TddAckFbModeCfgOptSwitch is on, the HARQ-ACK feedback mode is
reconfigured based on UE services. If the TddAckFbModeCfgOptSwitch NO
is off, the HARQ-ACK feedback mode is not reconfigured based on UE
services.
Indicates the coverage-based inter-frequency handover mode. If this
parameter is set to HANDOVERIMMEDIATELY(Handover Immediately),
the eNodeB immediately determines whether to perform a coverage-
based inter-frequency handover when receiving a measurement report. If
this parameter is set to BASEDONSIGNALSTRENGTH(Based on Signal
Strength), the eNodeB waits a moment and then determines whether to
NO
perform a coverage-based inter-frequency handover to the strongest
neighboring cell indicated by the received measurement reports. If this
parameter is set to BASEDONFREQPRIORITY(Based on Frequency
Priority), the eNodeB waits a moment and then determines whether to
perform a coverage-based inter-frequency handover to a cell whose
frequency has a relatively low priority.

Indicates whether the eNodeB broadcasts the coordinated universal time

(UTC) in the LTE system over the air interface. If this parameter is set to
on, the eNodeB broadcasts the UTC in the LTE system using system NO
information block type 16 (SIB16). If this parameter is set to off, the
eNodeB does not broadcast the UTC in the LTE system.
Indicates whether to enable a specific scheduling policy in the uplink and
downlink.
AbnUeSchSwitch: Indicates whether to disable scheduling of abnormal NO
UEs. If this switch is on, abnormal UEs are not scheduled. If this switch
is off, abnormal UEs are scheduled.

Indicates whether to enable the Soft Split Resource Duplex (SSRD)

algorithm.
SsrdDl8TAlgoSwitch: If this switch is on, the soft split multi-user pairing
NO
algorithm is enabled in the downlink.
If this switch is off, the soft split multi-user pairing algorithm is disabled in
the downlink.
Indicates whether to enable UL CoMP in an SFN cell.
IntraBaseBandSwitch:off and InterBaseBandSwitch:off: UL CoMP is
disabled in an SFN cell.
IntraBaseBandSwitch:on and InterBaseBandSwitch:off: Intra-BBP UL
CoMP is enabled in an SFN cell.
IntraBaseBandSwitch:on and InterBaseBandSwitch:on: Both intra-BBP
UL CoMP and inter-BBP UL CoMP are enabled in an SFN cell.
IntraBaseBandSwitch:off and InterBaseBandSwitch:on: This setting is
invalid.
ComCoverUlCompSwitch:on: UL CoMP is supported when multiple RF
NO
modules provide the same coverage in an SFN cell.
ComCoverUlCompSwitch:off: UL CoMP is not supported when multiple
RF modules provide the same coverage in an SFN cell.
ComCoverUlCompSwitch applies only to TDD, not FDD.
SfnUplinkComp3CellSwitch: This switch takes effect when
IntraBaseBandSwitch or InterBaseBandSwitch is on.
SfnUplinkComp3CellSwitch:on: UL CoMP is supported in three physical
cells of an SFN cell. SfnUplinkComp3CellSwitch:off: UL CoMP is
supported in two physical cells of an SFN cell.
SfnUplinkComp3CellSwitch applies only to FDD, not TDD.

Indicates whether to enable the inter-frequency directional handover

algorithm for low-speed UEs. If this switch is turned on, the eNodeB
instructs low-speed UEs in RRC_CONNECTED mode in networks NO
dedicated to high-speed railways to measure low-speed inter-frequency
cells to hand over the UEs to low-speed inter-frequency cells.
Indicates whether to enable or disable the relay-related functions. This
parameter is dedicated to LTE TDD cells.
OutOfBandRelaySwitch: Indicates whether to enable or disable the out- NO
of-band relay feature. If this switch is on, the out-of-band relay feature is
enabled. If this switch is off, the out-of-band Relay function is disabled.

Indicates whether to enable the inter-frequency directional handover

algorithm. If this switch is turned on, the eNodeB instructs UEs in
RRC_CONNECTED mode in networks dedicated to high-speed railways NO
to measure inter-frequency cells to hand over the UEs to high-speed
inter-frequency cells.
Indicates whether to apply the power decrease mechanism on reference
signal (RS) power and physical synchronization channel (PSCH) power.
If this parameter is set OFF, the physical downlink shared channel
NO
(PDSCH) transmit power is lowered, the RS power and PSCH power are
not lowered. If this parameter is set to ON, all of the PDSCH power, RS
power, and PSCH power are lowered.

Indicates whether channel quality indicator (CQI) detection errors can be

identified in the presence of interference. If this switch is on, CQI
detection errors can be identified, and a historical CQI is used in the NO
eNodeB. If this switch is off, CQI detection errors cannot be identified in
the presence of interference.
Indicates whether the eNodeB determines interference strength. The
eNodeB determines interference strength only when this switch is on,
which ensures accurate adaptive switchover between maximum ratio
combining (MRC) and interference rejection combining (IRC). This
parameter takes effect only when PucchIrcSwitch of the IrcSwitch
parameter is on.
When PucchIrcSwitch is off, setting the PucchIRCEnhance parameter to
NO
ON and turning on PucchIrcSwitch improves the PUCCH detection
performance, compared with the scenarios where PucchIrcSwitch is off
and the PucchIRCEnhance parameter is set to off.
In scenarios with PucchIrcSwitch turned on, setting the
PucchIRCEnhance parameter to ON decreases the number of false
PUCCH detections and also slightly decreases PUCCH detection
performance compared with the PucchIRCEnhance parameter set to off.
Indicates whether to enable intelligent access barring algorithms. This
parameter controls whether to enable intelligent access barring on
mobile-originated (MO) signaling, MO data, service specific access
control (SSAC) for multimedia telephony (MMTEL) voice services, or
SSAC for MMTEL video services. This parameter takes effect only when
the AcBarAlgoSwitch parameter in the CellAlgoSwitch MO is set to
ACBAR_SWITCH_DYNAMIC.
DYNAMIC_FOR_MO: Indicates whether to enable intelligent access
barring on UEs running MO signaling or MO data.
If this switch is on, intelligent access barring applies to UEs running MO
NO
signaling or MO data.
If this switch is off, intelligent access barring does not apply to UEs
running MO signaling or MO data.
DYNAMIC_FOR_SSAC: Indicates whether to enable intelligent access
barring on UEs running MMTEL voices services or MMTEL video
services.
If this switch is on, intelligent access barring applies to UEs running
MMTEL voices services or MMTEL video services.
If this switch is off, intelligent access barring does not apply to UEs
running MMTEL voices services or MMTEL video services.
Indicates whether the CellRangeExpansion parameter takes effect in a
HetNet.
If this parameter is set to OFF and static or dynamic eICIC is enabled,
the CellRangeExpansion parameter takes effect.
If this parameter is set to ON and dynamic eICIC is enabled, the
CellRangeExpansion parameter takes effect according to the dynamic
NO
eICIC algorithm; If this switch is turned on in other cases (that is,
dynamic eICIC is disabled, static eICIC is enabled, or static eICIC is
disabled), the CellRangeExpansion parameter takes effect for all UEs
(including R8 and R9 UEs) in the cell.
For macro and micro cells in a HetNet, it is recommended that this
parameter be set to the same value.

Indicates whether MLB for low-efficiency UEs is enabled. The

InterFreqBackoffSwitch check box under this parameter indicates
whether inter-frequency MLB for low-efficiency UEs is enabled.
When this check box is selected, inter-frequency MLB for low-efficiency NO
UEs is enabled. When this check box is deselected, inter-frequency MLB
for low-efficiency UEs is disabled.
This parameter applies only to LTE TDD cells.
Indicates whether to enable eNodeB-level handovers to be activated in
the cell when related eNodeB-level handover switches are on.
SrvBasedInterFreqHoSw: Indicates whether to enable service-based
NO
inter-frequency handover to be activated in the cell. Service-based inter-
frequency handover is allowed to be activated in the cell only when this
switch is on.
Indicates neighboring cell classification management. This parameter
consists of the following switches:
INTRA_RAT_NCELL_CLASS_SW: If this switch is on,
IntraRatEventAnrSwitch is on, and the ANR indicator is set to ALLOWED
for this frequency, the neighboring cell classification label is automatically
marked for a neighboring cell based on the handover times within a
specified period of time.
NCELL_CLASS_HO_POLICY_SW: If this switch is on, NO
IntraRatEventAnrSwitch is on, the ANR indicator is set to ALLOWED for
this frequency, and the NCellClassLabel parameter value is EXTENDED,
target cells for handovers must be determined based on E-UTRAN cell
global identifier (ECGI) reading.
NCELL_CLASS_PCI_CONFLICT_SW: If this switch is on, PCI conflict
detection and reporting are not performed on the neighboring cells
whose NCellClassLabel parameter value is EXTENDED.
Indicates whether to enable PCI-based algorithms. This parameter
includes the following switches:
IntraAnrPolicySwitch: Indicates whether to enable PCI-based intra-RAT
ANR. If this option is selected and IntraRatEventAnrSwitch or
IntraRatFastAnrSwitch is selected, PCI-based intra-RAT ANR is enabled
to construct and optimize neighboring relationships between common
cells and cells with special PCIs.
PciConflictDetectPolicySwitch: Indicates whether to enable PCI-based
PCI conflict detection. If this option is selected and
CONFUSION_DETECT_SWITCH of the PciConflictDetectSwitch NO
parameter is selected, PCI-based PCI conflict detection is enabled. If the
eNodeB attempts to configure a cell with a special PCI that operates on
the same frequency and has the same PCI with any configured
neighboring cell of a common cell as another neighboring cell of the
common cell, PCI confusion detection is not performed on the cell with a
special PCI.
If the PCI of a cell is within the value range specified by parameters in
EutranSpePciCell MOs, this cell is a cell with special PCI; otherwise, this
cell is a common cell.

Indicates whether to enable passive intermodulation (PIM) interference

mitigation in the cell. PIM interference mitigation is performed on cells
generating intermodulation interference on each other if the following
conditions are met: (1) This parameter is set to on; (2) The eNodeB is
NO
equipped with an LPMP; (3) Cells are added to a PIM interference
mitigation cell set. If this parameter is set to off, PIM interference
mitigation is not performed on cells. This parameter applies only to FDD
macro eNodeBs.
Indicates whether to enable joint reception on the PRACH in 16T16R
LTE TDD networks. If the PrachJointReceptionSwitch parameter is set to
ON, joint reception on the PRACH is enabled. If the
NO
PrachJointReceptionSwitch parameter is set to OFF, joint reception on
the PRACH is disabled. This parameter applies only to 16T16R LTE TDD
networks.

Indicates whether to enable the FeICIC algorithm. The FeICIC algorithm

can be disabled and enabled.In a heterogeneous network (HetNet). If
this algorithm is used together with the appropriate range expansion
function of the micro base station and Dynamic TDM eICIC
NO
algorithm,the coverage of micro cells can be expanded and the number
of users absorbed by the micro cells incresed. To support FeICIC
algorithm , settings of the EicicSwitch in macro cells must be the
DYNAMIC. This parameter applies only to LTE FDD cells.
Indicates whether to enable coordinated AMC in the cell. This parameter
NO
applies only to LTE FDD.

Indicates whether to enable MPMU-level UE identification in LampSite

eNodeBs. If this parameter is set to ON(On), the eNodeB generates the
NO
mapping between UEs and MPMUs for MPMU-level maintenance and
commissioning based on CHRs and counters.
Indicates whether scheduling optimization for high-speed or high-speed
railway scenarios is enabled.
InterfHighSpeedSW: This check box specifies whether interference
coordination for high-speed railway scenarios is enabled. When this
check box is selected, interference coordination for high-speed railway
scenarios is enabled and the eNodeB works with the eCoordinator to
perform coordinated scheduling between public and dedicated networks.
When this check box is deselected, interference coordination for high-
speed railway scenarios is disabled. This check box applies only to LTE NO
TDD cells.
HighSpeedUserRedirectSwitch: This check box specifies whether high-
speed UEs can be redirected to high-speed frequencies. When this
check box is selected in a common cell near the high-speed railway, the
eNodeB redirects the UEs that are handed over frequently to a high-
speed railway dedicated network. In other scenarios, it is recommended
that this check box be deselected. This check box applies only to LTE
TDD cells.
Indicates whether to enable the functions related to service
differentiation.
VideoRateAdaptSwitch: If this option is deselected, adaptive data rate
adjustment for video services is disabled. If this option is selected,
NO
adaptive data rate adjustment for video services is enabled.
DownLoadRateLimitSwitch: If this option is deselected, download data
rate control during busy hours is disabled. If this option is selected,
download data rate control during busy hours is enabled.

Indicates whether to enable GBR assurance for extended-QCI-based

PTT services. If this parameter is set to ON(On), the cell ensures the NO
GBR for PTT services.
Indicates whether to enable allocation enhancement for SRS and
PUCCH resources. When this parameter is set to ON, allocation
enhancement for SRS and PUCCH resources is enabled and inaccurate
resource allocation caused by the delay of cell load update no longer NO
occurs. When this parameter is set to OFF, the general resource
allocation procedure is used and inaccurate resource allocation caused
by the delay of cell load update occurs.
Indicates whether the UeInactiveTimerQci1 parameter takes effect. If the
UEInactiveTimerQCI1Switch parameter is set to ON(On), the
UeInactiveTimerQci1 parameter takes effect. If the NO
UEInactiveTimerQCI1Switch parameter is set to OFF(Off), the
UeInactiveTimer parameter takes effect.
Indicates whether to enable UL CoMP among cells each with the specific
number of RX antennas.
Ul1R1RJRSwitch: Indicates whether to enable UL CoMP among cells
each with one RX antenna. If this option is selected, UL CoMP is
enabled among such cells. You are advised to select this option when
the serving cell and coordinating cells are not connected based on
relaxed backhaul. If this option is deselected, UL CoMP among such
cells is disabled. This option applies only to LTE FDD.
Ul1R2RJRSwitch: Indicates whether to enable UL CoMP among cells
each with one RX antenna and cells each with two RX antennas. If this
option is selected, UL CoMP among such cells is enabled. You are
advised to select this option when the serving cell and coordinating cells
are not connected based on relaxed backhaul. If this option is
deselected, UL CoMP among such cells is disabled. This option applies
only to LTE FDD.
Ul2R8RJRSwitch: Indicates whether to enable UL CoMP among cells
each with two RX antennas and cells each with eight RX antennas. If this NO
option is selected, UL CoMP among such cells is enabled. If this option
is deselected, UL CoMP among such cells is disabled. This option
applies only to LTE TDD cells in cell combination scenarios.
Ul4R8RJRSwitch: Indicates whether to enable UL CoMP among cells
each with four RX antennas and cells each with eight RX antennas. If
this option is selected, UL CoMP among such cells is enabled. If this
option is deselected, UL CoMP among such cells is disabled. This option
applies only to LTE TDD.
Ul8R8RJRSwitch: Indicates whether to enable UL CoMP among cells
each with eight RX antennas. If this option is selected, UL CoMP among
such cells is enabled. If this option is deselected, UL CoMP among such
cells is disabled. This option applies only to LTE TDD.
UL CoMP among cells each with two RX antennas or cells each with four
RX antennas is enabled by default in the scenarios indicated by specific
options under the UplinkCompSwitch or SfnUplinkCompSwitch
parameter when the options are selected.

Indicates whether to enable the phase shift algorithm for virtual antenna
mapping in four-antenna scenarios with two CRS ports. This parameter NO
applies only to LTE TDD cells.
Indicates whether traffic-based MLB algorithms are enabled.
UlHeavyTrafficMlbSwitch: Indicates whether to enable uplink heavy
traffic-based MLB. If this option is selected, uplink heavy traffic-based
MLB is enabled, and UEs with heavy traffic in the uplink are handed over NO
to the target neighboring cell during MLB. If this option is deselected,
uplink heavy traffic-based MLB is disabled. This option applies only to
LTE TDD networks.

Indicates whether measurement-related optimization algorithms are

enabled.
GSM_MEAS_DEL_INTERFREQ_SW: Indicates whether to release inter-
frequency measurements after a GSM measurement is triggered when
the UE is performing VoIP services. If the UE is performing VoIP services
NO
and this option is selected, the eNodeB releases all inter-frequency
measurements when a GSM measurement is triggered. This reduces the
GSM measurement reporting delay. If the UE is performing VoIP services
and this option is deselected, the eNodeB does not release inter-
frequency measurements when the GSM measurement is triggered.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the band division scheme used in downlink ICIC. The band
division in the cell is adjusted according to the setting of this parameter
so that the edge bands for neighboring cells do not overlap. If this NO
parameter is set to INVALID, the cell does not distinguish center and
edge bands.

Indicates the G factor threshold for user attribute determination in

downlink adaptive Inter-Cell Interference Coordination (ICIC). If downlink
adaptive ICIC is enabled, the eNodeB selects cell edge users (CEUs)
from the users whose G factors are less than this threshold. Determine
the parameter value based on the distribution of UEs' modulation and
coding scheme (MCS) indexes within an area so that about one third
users are determined to be CEUs. For example, if an area is covered by
NO
155 cells and the percentages of users whose MCS indexes are less
than 6 and 7 are about 30% and 40%, respectively, you can set this
parameter to 1. (The G factors corresponding to MCS indexes 6 and 7
are 0.5 dB and 1.45 dB, respectively.) The G factors corresponding to
MCS indexes 0 to 28 are –5.65, –4.5, –3.55, –2.35, –1.5, –0.5, 0.5, 1.45,
2.45, 3.4, 3.7, 4.4, 5.4, 6.3, 7.25, 8.3, 8.95, 9.6, 10.15, 11.15, 12.1,
13.15, 14.05, 15.1, 16, 17, 18.1, 19, and 20.1, respectively.
Indicates the reference signal received power (RSRP) threshold for
determining noise-afflicted UEs (that is, UEs that are mainly affected by
noise) within a network. If all RSRP values of neighboring cells included
in A3 reports sent by a UE are less than this threshold, the event A3 is
NO
not considered in interference calculation. In general scenarios, the
recommended value of this parameter is -102. In tests for small-scale
networks, this parameter can set to other values. (ActualBound = -140 +
Bound)

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the offset of the DCI power relative to the reference signal
NO
power when the PDCCH channel carries dedicated control information.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the PA value of cell center UEs when DL ICIC is enabled. NO
Indicates the PA value of cell edge UEs when DL ICIC is enabled. NO

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the power offset between the PHICH transmit(TX) power and
the reference signal(RS) power. This offset is used when PHICH power NO
control is disabled.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the switch of the DL scheduling policy. According to the Max C/I
scheduling policy, the UE with good-quality channels are scheduled and
hence the spectral efficiency is very high. The QoS and fairness among
users, however, cannot be ensured. The Max C/I scheduling policy can
be used to verify the maximum capacity of the system. The RR
scheduling policy is the fairest scheduling policy. When RR is adopted,
the system capacity is the smallest. Therefore, RR is used only to verify
the upper bound of the scheduling fairness in the system. In terms of the NO
scheduling effect, the PF scheduling policy is between the previous two
policies. Therefore, PF can be used to verify the capacity, coverage, and
fairness of the system. The EPF scheduling policy supports the features
such as user QoS, system capacity, and channel frequency selection.
The basic scheduling policy is mainly used for the performance test
purpose. During common operation, the EPF scheduling policy is
recommended.

Indicates the percentage of free shared RBs on the PDSCH in

scheduling based on pay-free users and pay users. The other RBs on
the PDSCH are allocated to pay users. When sufficient capacity is
available, the percentage of RBs occupied by pay-free users and that
occupied by pay users will reach the preset values. Changes in this NO
parameter affect the percentage of RBs for pay-free users and that for
pay users. Modifying the value of this parameter for an active cell will
lead to the re-setup of the cell.This parameter applies only to LTE TDD
cells.
Indicates the maximum number of layers (the rank) in the
implementation of multiple-input multiple-output (MIMO) in DL NO
scheduling.

Indicates the downlink scheduling policy used when CA is applied, which

can be basic scheduling or differentiated scheduling. (If CA is applied in
the uplink, this parameter also indicates the uplink scheduling polity.) If
the CA basic scheduling policy is adopted, the eNodeB calculates the
proportional fair (PF) scheduling priority of each component carrier (CC)
for a CA UE using the total data rates on both CCs of this CA UE. In this
NO
way, CA UEs and non-CA UEs can be allocated similar number of RBs. If
the CA differentiated scheduling policy is adopted, the eNodeB
calculates the PF scheduling priority of each CC for a CA UE using the
data rate only on the primary component carrier (PCC) or secondary
component carrier (SCC) of this CA UE. In this way, CA UEs can achieve
better performance than non-CA UEs.
Indicates the proportion of resources reserved for non-GBR services. A
proportion of resources is reserved periodically to prevent non-GBR
services from failing to be allocated resources. During the periods when
NO
resources are reserved, resources are scheduled preferentially for non-
GBR services. If this parameter is set to 0, resources are not reserved
for non-GBR services.

Indicates the capacity factor for downlink enhanced proportional fair

(EPF) scheduling. This factor affects the scheduling priorities of UEs
NO
running services with the QCI of 6, 7, 8, or 9, and accordingly can be
used to adjust the cell capacity and fairness among users.
Indicates the selection ratio threshold for the function of lowering the
modulation and coding scheme (MCS) index to increase the number of
resource blocks (RBs) with priority for UEs running services with small
packets. If the threshold of TTIs within which downlink scheduling is NO
performed and RBs are surplus is less than this parameter value, the
function is enabled.The value 0 indicates that the function is disabled.
The value 100 indicates that the function is always enabled.

Indicates the resource block (RB) allocation mode for cell edge users
(CEUs) when downlink ICIC is enabled. If this parameter is set to
ALL_EDGE_USER, RBs in the current transmission time interval (TTI)
are firstly allocated to cell center users (CCUs) and then allocated to all NO
CEUs. If this parameter is set to PART_EDGE_USER, RBs in the current
TTI are firstly allocated to CCUs and then allocated to the CEUs to which
RBs have not been allocated within this TTI.

Indicates the scheduling policy used when downlink ICIC is enabled. If

this parameter is set to EDGE_USER_NO_PRIO, both cell center users
(CCUs) and cell edge users (CEUs) can preempt edge bands, thereby
improving CCUs' performance. If this parameter is set to NO
EDGE_USER_PRIO, CCUs are scheduled at both the center band and
the edge band only after CEUs have been scheduled at the edge band,
and therefore CEUs' performance improves.
For services whose QoS class identifier (QCI) is not 1: When this
parameter is set to ROUND_DOWN: (1) If the number of required
resource block groups (RBGs) is less than 1, the actual number of RBs
are allocated to UEs at the current transmission time interval (TTI); (2) If
the number of required RBGs is greater than N but less than N+1 (N is
greater than or equal to 1), RBs of N RBGs are allocated to UEs in the
current TTI and the other required RBs are allocated to UEs in the next
TTI. Setting this parameter to ROUND_DOWN ensures full utilization of
RBs, but increases scheduling times and decreases downlink data rate.
If this parameter is set to ROUND_UP and the number of required RBGs
is greater than N but less than N+1 (N is greater than or equal to 0), RBs
of N+1 RBGs are allocated to UEs in the current TTI. Setting this
parameter to ROUND_UP wastes a few RBs, but decreases scheduling
times and increases downlink data rate. When this parameter is set to
ADAPTIVE: (1) If the number of required RBGs is less than 1, the actual
number of RBs are allocated to UEs at the current TTI; (2) If the number
NO
of required RBGs is greater than N but less than N+1 (N is greater than
or equal to 1), RBs of N+1 RBGs are allocated to UEs in the current TTI.
Compared with setting this parameter to ROUND_UP, setting this
parameter to ADAPTIVE does not waste RBs when the number of
required RBGs is less than 1. For services whose QCI is 1 (such as VoIP
services): When this parameter is set to ROUND_DOWN: (1) If the
number of required RBGs is less than 1, the actual number of RBs are
allocated to UEs at the current TTI; (2) If the number of required RBGs is
greater than N but less than N+1 (N is greater than or equal to 1), RBs of
N+1 RBGs are allocated to UEs in the current TTI. If this parameter is
set to ROUND_UP or ADAPTIVE, RBs are allocated to UEs in the same
way that they are allocated when this parameter is set to ROUND_UP or
ADAPTIVE for services whose QCI is not 1, respectively. For ping
services: If the number of required RBGs is greater than N but less than
N+1 (N is greater than or equal to 0), RBs of N+1 RBGs are allocated to
UEs in the current TTI regardless of the actual parameter setting.

Indicates the maximum number of downlink hybrid automatic repeat

NO
request (HARQ) transmissions. For details, see 3GPP TS 36.331.

Indicates the weight for scheduling non-GBR services with long

NO
scheduling delay.
Indicates the duration within which the eNodeB performs downlink
scheduling based on a low modulation and coding scheme (MCS) order
in handovers. The eNodeB starts this timer after determining a UE has
entered the handover area or has been handed over to the target cell.
NO
The eNodeB performs downlink scheduling based on a low MCS order
during the running of this timer. After the timer expires, the eNodeB
performs downlink scheduling based on a new MCS order after CQI
adjustment.

Indicates whether to perform downlink rank optimization. If this

parameter is set to OFF, the eNodeB uses the rank received from a UE
to schedule the UE. If the baseband processing unit determines that the
received rank is unsuitable for UE scheduling, the eNodeB schedules the
UE based on rank 1. If this parameter is set to ON, the eNodeB
NO
optimizes the received rank and schedules the UE based on the
optimized rank. If the baseband processing unit determines that the
received rank is unsuitable for UE scheduling, the eNodeB does not
optimize the received rank and schedules the UE based on the rank
used last time.

Indicates the method for measuring the Doppler frequency offset that is
applied to frequency selective scheduling on the secondary component
carrier (SCC) in carrier aggregation (CA). If this parameter is set to
FROMSCC, the Doppler frequency offset on the SCC is measured. If this
parameter is set to FROMPCC, the Doppler frequency offset on the NO
primary component carrier (PCC) is measured no matter whether the
SCC is configured with an uplink carrier, and then the Doppler frequency
offset is applied to frequency selective scheduling on the SCC after
converting downlink frequencies of the PCC and SCC.
Indicates the semi-persistent scheduling period in the downlink. This
parameter applies only to LTE TDD cells. In FDD mode, the downlink
semi-persistent scheduling period is 20 ms and cannot be changed. If
this parameter is set to ADAPTIVE, the system adaptively selects an NO
uplink semi-persistent scheduling period of 20 ms or 40 ms. If this
parameter is set to ms20 or ms40, the downlink semi-persistent
scheduling period is 20 ms or 40 ms, respectively.
Indicates how to apply the policy of increasing the number of resource
blocks (RBs) to lower the modulation and coding scheme (MCS) index. If
this parameter is set to SINGLEUSER_STRATEGY, the policy is applied
to a single RRC_CONNECTED UE whose capability is limited (Maximum
number of DL-SCH transport block bits received within a TTI of the UE is
less than the maximum TBS with the total number of PRBs). The policy
is applied to a single service when the following conditions are met within
a measurement period: (1) this parameter is set to
SINGLEUSER_STRATEGY; (2) the service is the only service to be
scheduled in the cell; (3) the proportion of the transmission time intervals
(TTIs) in which RBs are expected to be surplus is less than a specified
threshold. If this parameter is set to MULTIUSER_STRATEGY, the policy
NO
is applied to the last capability-limited UE to be scheduled. If this
parameter is set to MULTIUSER_STRATEGY and the proportion of TTIs
in which RBs are expected to be surplus is less than a specified
threshold within a measurement period, this strategy is applied to the last
UE to be scheduled. If this parameter is set to
MULTIUSR_LOWMCSLIMIT_STRATEGY, the policy is applied to the last
capability-limited UE to be scheduled. If this parameter is set to
MULTIUSR_LOWMCSLIMIT_STRATEGY and the proportion of TTIs in
which RBs are expected to be surplus is less than a specified threshold
within a measurement period, this strategy is applied to the last UE to be
scheduled, and the MCS index decreases by a maximum of 3. This
parameter applies only to LTE FDD networks.
Indicates whether to perform rank detection. If the
DetectRank2AdjSwitch option is deselected, UEs do not perform rank 2
detection when reporting rank 1. In this case, UEs perform single-
codeword scheduling. If the DetectRank2AdjSwitch option is selected:
(1) All UEs perform rank 2 detection when reporting rank 1 if whitelisted
UEs have not been configured. (2) Only whitelisted UEs perform rank 2
detection when reporting rank 1 if whitelisted UEs have been
NO
configured.If the DetectRank1AdjSwitch check box is cleared, the UE
does not perform rank 1 detection when reporting rank 2. In this case,
the UE performs dual-codeword scheduling. If the
DetectRank1AdjSwitch check box is selected, the UE performs rank 1
detection when reporting rank 2.This version does not support the
function controlled by the DetectRank1AdjSwitch option, and the option
setting does not take effect.

Indicates whether to configure Multimedia Broadcast multicast service

Single Frequency Network (MBSFN) subframes. The ten options of this
parameter map to the ten MBSFN subframes. If an option is selected,
the corresponding subframe is configured. If an option is not selected, NO
the corresponding subframe is not configured. PDSCH services with
enhanced MIMO applied can be scheduled on configured MBSFN
subframes.
Indicates whether the TDD special subframes are used for downlink
scheduling.
If the parameter is set to SCH, TDD special subframes are used for
NO
downlink scheduling.
If the parameter is set to NSCH, TDD special subframes are not used for
downlink scheduling.

Indicates the traffic volume threshold of a bearer above which the bearer
is determined as a bearer with large packets in the PDCCH and PDSCH
resource allocation optimization mechanism when traffic is heavy. If this
parameter is set to 0, none of the bearers is determined as a bearer with
NO
large packets. If this parameter is set to a value ranging from 1 to
1000000 (indicating a threshold from 1 bit to 1,000,000 bits), a bearer
whose traffic to be scheduled is greater than or equal to this parameter
value is determined as a bearer with large packets.
Indicates the threshold for the number of synchronized UEs in a cell
above which the PDCCH and PDSCH resource allocation optimization
mechanism is activated in large traffic volume scenarios. If this
parameter is set to a value ranging from 0 to 10000 (indicating a NO
threshold from 0 UE to 10,000 UEs), the mechanism is activated when
the number of synchronized UEs in the cell is greater than or equal to
this parameter value.

Indicates the modular for calculating the first resource block (RB) to be
NO
scheduled based on interference randomization.
Indicates whether DCI1A downlink grant scheduling is used for UEs in
transmit diversity mode. This parameter applies only to LTE TDD cells. If
this parameter is set to ON and the UE in transmit diversity mode
requires single-codeword scheduling, the DCI1A format can be used for NO
downlink grant scheduling, which increases the DCI1A coverage area. If
this parameter is set to OFF, the downlink grant scheduling is performed
in default mode.

Indicates the threshold of consecutive discontinuous transmissions

(DTXs) in the downlink above which the eNodeB stops scheduling the NO
abnormal UE. The parameter value range is from 6 to 120.
Indicates the code rate for Random Access Response messages and
NO
paging messages.

Indicates the initial step in which channel quality indicators (CQIs) are
adjusted for UEs that initially access or are handed over to the network.
If the periodically measured initial block error rate (IBLER) exceeds the NO
fixed IBLER threshold, the CQI adjustment step is changed to its fixed
default value 0.1.
Indicates the scheduling policy of subframes transmitting CSI-RSs. This
parameter now includes one switch. UnCfgCsiRsUESchSwitch: Indicates
whether UEs that do not support CSI-RSs can be scheduled in
subframes transmitting CSI-RSs. These UEs can be scheduled in these NO
subframes only when this switch is on. UEs that do not support CSI-RSs
refer to the CSI-RSs that cannot identify the subframes transmitting CSI-
RSs. This switch applies only to LTE TDD cells.

Indicates the period for measuring downlink load of a single frequency

network (SFN) cell. The eNodeB determines the threshold for isolating
UEs scheduled in independent scheduling mode from UEs scheduled in
joint scheduling mode based on the downlink cell load measured within
each period. A heavier cell load results in a lower threshold and a higher
NO
probability that UEs enter independent scheduling mode. A lighter cell
load results in a higher threshold and a higher probability that UEs enter
joint scheduling mode.
This parameter takes effect only when the SfnDlSchSwitch parameter is
set to ADAPTIVE(Adaptive scheduling).
Indicates the determination period for frequency selective scheduling. If
FreqSelSwitch of the DlSchSwitch parameter is off, the
FreqSelJudgePeriod parameter setting does not take effect. If
FreqSelSwitch of the DlSchSwitch parameter is on, a smaller value of
the FreqSelJudgePeriod parameter results that UEs meeting frequency
selective scheduling conditions more easily enter the frequency selective NO
scheduling mode and a higher probability that the UEs repeatedly enter
and exit frequency selective scheduling mode. A larger value of the
FreqSelJudgePeriod parameter results in the opposite effects when
FreqSelSwitch of the DlSchSwitch parameter is on. This parameter
applies only to LTE FDD networks.

Indicates the switch that controls enhanced VoIP-dedicated downlink

scheduling. DlEnhancedVoipSchSw: Indicates the switch that controls
the cell load-based VoIP scheduling mode. There are two scheduling
modes: dynamic scheduling and semi-persistent scheduling. If this
switch is off, load-based adaptive selection of dynamic and semi- NO
persistent scheduling cannot be performed for UEs running voice
services. If this switch is on, dynamic and semi-persistent scheduling can
be adaptively selected for UEs running voice services based on the cell
load. This switch applies only to LTE TDD cells.
Indicates the aperiodic channel quality indicator (CQI) reporting period of
a UE adopting frequency diversity (FD) scheduling. This parameter can
be set to 5ms, 10ms, 20ms, 40ms, 80ms, 160ms, and inf. The parameter NO
value inf indicates that the aperiodic CQI reporting is not triggered. This
parameter applies only to LTE FDD.

Indicates the PRB usage threshold against which the downlink load level
is changed from low load to high load. This parameter applies only to NO
LTE TDD cells.

Indicates the PRB usage threshold against which the downlink load level
NO
is changed from high load to low load.
Indicates the offset to the high load threshold in the downlink of an
NO
adaptive SFN cell.

Indicates whether to enable the LBT function. This parameter applies

NO
only to LTE TDD cells.

Indicates the noise interference threshold for disabling downlink

transmission. If the noise interference received by the transmitter is
NO
greater than this threshold, downlink transmission is disabled. This
parameter applies only to LTE TDD cells.
Indicates the noise interference threshold for enabling downlink
transmission. If the noise interference received by the transmitter is less
NO
than this threshold, downlink transmission is enabled. This parameter
applies only to LTE TDD cells.

Indicates the duration of LBT for detecting noise interference. NO

Indicates whether downlink transmission is enabled. This parameter

NO
applies only to LTE TDD cells.

Indicates the noise interference power detected by LBT. This parameter

NO
applies only to LTE TDD cells.
Indicates the policy for triggering enhanced aperiodic CQI reporting. This
parameter takes effect only if the EnAperiodicCqiRptSwitch option of the
DlSchSwitch parameter is selected. If the EnAperiodicCqiTrigStrategy
parameter is set to CQI_PERIOD_BASED(CQI_PERIOD_BASED),
aperiodic CQI reporting is triggered only if the periodic CQI reporting
period is greater than the FDUEEnhAperCQITrigPeriod parameter value.
NO
If the EnAperiodicCqiTrigStrategy parameter is set to
CQI_REPORTINTERVAL_BASED(CQI_REPORTINTERVAL_BASED),
aperiodic CQI reporting is triggered only if the interval from the latest CQI
reporting (either periodic or aperiodic CQI reporting) is greater than the
FDUEEnhAperCQITrigPeriod parameter value. This parameter applies
only to LTE FDD.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the threshold of the PRB usage for triggering inter-frequency
load balancing. If the MlbTriggerMode parameter is set to
PRB_ONLY(PrbMode) or PRB_OR_UE_NUMBER(PrbOrUeNumMode),
inter-frequency load balancing is triggered when the number of
synchronized UEs in the cell is greater than or equal to the sum of the
MlbMinUeNumThd and MlbMinUeNumOffset parameter values and the NO
PRB usage of the cell is greater than or equal to the sum of the
InterFreqMlbThd and LoadOffset parameter values. Load balancing
stops when the PRB usage of the cell or the number of synchronized
UEs falls below the value of the InterFreqMlbThd parameter or the value
of the MlbMinUeNumThd parameter, respectively.
Indicates the threshold of the PRB usage for triggering inter-RAT load
sharing. Inter-RAT load sharing is triggered if the number of
synchronized UEs in the cell is greater than or equal to the sum of the
InterRatMlbUeNumThd and InterRatMlbUeNumOffset parameter values
and the PRB usage of the cell is greater than or equal to the NO
InterRatMlbThd and LoadOffset parameter values. Inter-RAT load
sharing stops if the number of synchronized UEs in the cell is less than
the InterRatMlbUeNumThd parameter value or the PRB usage of the cell
is less than the InterRatMlbThd parameter value.

Indicates the offset of the PRB usage for triggering inter-frequency load
balancing. Inter-frequency load balancing is triggered if the number of
synchronized UEs in the cell is greater than or equal to the sum of the
MlbMinUeNumThd and MlbMinUeNumOffset parameter values and the
PRB usage of the cell is greater than or equal to the sum the
InterFreqMlbThd and LoadOffset parameter values. Inter-frequency load
balancing is triggered if the number of synchronized UEs in the cell is
greater than or equal to the sum of the MlbMinUeNumThd and
MlbMinUeNumOffset parameter values and the PRB valuation in the cell
is greater than or equal to the sum of the PrbValMlbTrigThd and
NO
LoadOffset parameter values. Inter-RAT load sharing is triggered if the
number of synchronized UEs in the cell is greater than or equal to the
sum of the InterRatMlbUeNumThd and InterRatMlbUeNumOffset
parameter values and the PRB usage of the cell is greater than or equal
to the InterRatMlbThd and LoadOffset parameter values. Inter-RAT load
sharing to transfer to-be-released UEs is triggered if the number of
synchronized UEs is greater than or equal to the sum of the
InterRATIdleMlbUeNumThd and InterRatMlbUeNumOffset parameter
values and the PRB usage of the cell is greater than or equal to the sum
of the InterRatMlbThd and LoadOffset parameter values.
Indicates the threshold of PRB usage difference between the serving cell
and a neighboring cell. When the result of the PRB usage of the serving
cell minus that of a neighboring cell is greater than the parameter value, NO
this neighboring cell can be a target cell for mobility load balancing
(MLB).

Indicates the threshold for the number of uplink synchronized UEs in the
cell used to trigger PRB-usage-based inter-RAT load sharing. PRB-
usage-based inter-RAT load sharing is triggered when the PRB usage of
the cell is greater than or equal to the sum of the InterRatMlbThd and
LoadOffset parameter values and the number of uplink synchronized
UEs in the cell is greater than or equal to the sum of the
InterRatMlbUeNumThd and InterRatMlbUeNumOffset parameter values.
PRB-usage-based inter-RAT load sharing stops if the number of uplink
synchronized UEs in the cell is less than the InterRatMlbUeNumThd
NO
parameter value or the PRB usage of the cell is less than the
InterRatMlbThd parameter value. The actual threshold for the number of
uplink synchronized UEs equals the percentage value of this parameter
multiplied by 1000. For example, the GUI value of 1 indicates that the
threshold for the number of uplink synchronized UEs is 10 (1000 x 1%),
the GUI value of 2 indicates a threshold of 20, and the GUI value of 10
indicates a threshold of 100. An exception is that if the parameter value
is 100 or 99, the threshold for the number of uplink synchronized UEs is
1 or 2, respectively.
Indicates the standard valid duration for load sharing with universal
terrestrial radio access network (UTRAN) for UEs in idle mode. The
NO
actual duration increases on the basis of a standard valid duration with
the increase of the number of uplink-synchronized UEs.

Indicates the control factor for the amount of a single load transfer. The
value of this parameter has an impact on the efficiency of MLB algorithm NO
and the algorithm to prevent ping-pong load transfer.
Indicates the variable that triggers a mobility load balancing (MLB)
procedure.
In MLB with load information exchange, If this parameter is set to
PRB_ONLY(PrbMode), PRB usage is used as a triggering variable and
the number of UEs is used as a supplementary triggering variable; PRB
usage difference between cells is used as a UE transfer condition; the
aim of MLB is to achieve the same number of remaining PRBs between
cells. If this parameter is set to UE_NUMBER_ONLY(UeNumMode), the
number of UEs is used as a triggering variable; the difference of the
number of UEs per unit of bandwidth between cells is used as a UE
transfer condition; the aim of MLB is to achieve the same number of UEs
per unit of bandwidth between cells. If this parameter is set to
PRB_OR_UE_NUMBER(PrbOrUeNumMode), the combination of the
triggering variables, UE transfer conditions, and MLB aims for the values
UE_NUMBER_ONLY(UeNumMode) and PRB_ONLY(PrbMode) are
NO
used.
In MLB without load information exchange, If this parameter is set to
PRB_ONLY(PrbMode), PRB usage is used as a triggering variable and a
UE transfer condition and the number of UEs is used as a
supplementary triggering variable and a supplementary UE transfer
condition; the aim of MLB is to achieve that the PRB usage is less than
the InterFreqMlbThd parameter value. If this parameter is set to
UE_NUMBER_ONLY(UeNumMode), the number of UEs is used as a
triggering variable and a UE transfer condition; the aim of MLB is to
achieve that the number of UEs is less than the InterFreqMlbUeNumThd
parameter value. If this parameter is set to
PRB_OR_UE_NUMBER(PrbOrUeNumMode), the combination of the
triggering variables, UE transfer conditions, and MLB aims for the values
UE_NUMBER_ONLY(UeNumMode) and PRB_ONLY(PrbMode) are
used.

Indicates the threshold of the number of synchronized UEs for triggering

inter-frequency load balancing. When the MlbTriggerMode parameter is
set to UE_NUMBER_ONLY(UeNumMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode), inter-frequency load
balancing is triggered if the number of synchronized UEs in the cell is NO
greater than or equal to the sum of the InterFreqMlbUeNumThd and
MlbUeNumOffset parameter values. Inter-frequency load balancing stops
if the number of synchronized UEs in the cell is less than the
InterFreqMlbUeNumThd parameter value.
Indicates the offset of the number of synchronized UEs for triggering
inter-frequency load balancing. User-number-based inter-frequency load
balancing is triggered if the number of synchronized UEs in the cell is
greater than or equal to the sum of the InterFreqMlbUeNumThd and
NO
MlbUeNumOffset parameter values. User-number-based inter-frequency
load balancing to transfer to-be-released UEs is triggered if the number
of synchronized UEs in the cell is greater than or equal to the sum of the
InterFreqIdleMlbUeNumThd and MlbUeNumOffset parameter values.

Indicates the maximum number of UEs that can be transferred to inter-

frequency neighboring cells within a load balancing period triggered by
different factors. This parameter is used to prevent too many UEs from
NO
being transferred to inter-frequency neighboring cells within a load
balancing procedure and the load in inter-frequency neighboring cells
from increasing significantly.
Indicates the UE PRB usage threshold for UE selection in mobility load
balancing (MLB). (1) If the MlbTriggerMode parameter is set to
PRB_ONLY(PrbMode) and the value of this parameter is set to 100, no
NEs are selected. If the value of this parameter is not set to 100, the
eNodeB selects UEs whose PRB usage in the transmission direction
(that triggers MLB) is greater than this parameter value but the PRB
usage in the opposite direction that triggers MLB is less than this
parameter value. (2) If the MlbTriggerMode parameter is set to
UE_NUMBER_ONLY(UeNumMode) and the value of this parameter is
set to 100, the eNodeB selects UEs without considering the UE PRB
usage. If the value of this parameter is not set to 100, the eNodeB NO
selects UEs whose PRB usage is less than or equal to this parameter
value. (3) If the MlbTriggerMode parameter is set to
PRB_OR_UE_NUMBER(PrbOrUeNumMode) and the MLB procedure is
triggered by the PRB usage, the eNodeB selects UEs for MLB in the
same way as that when the MlbTriggerMode parameter is set to
PRB_ONLY(PrbMode). If the MlbTriggerMode parameter is set to
PRB_OR_UE_NUMBER(PrbOrUeNumMode) and MLB is triggered by
the number of activated UEs in the serving cell, the eNodeB selects UEs
for MLB in the same way as that when the MlbTriggerMode parameter is
set to UE_NUMBER_ONLY(UeNumMode).

Indicates the MLB mode for downlink data transfer. If this parameter is
set to UeNumBased, the downlink data transfer MLB algorithm is
enabled. If this parameter is set to NON_TRIGGERED, the downlink NO
data transfer MLB algorithm is disabled.
This parameter is dedicated to LTE TDD cells.
Indicates whether to enable operator-level inter-frequency load
balancing. If this parameter is set to SHARING, operator-level inter-
frequency load balancing is enabled and inter-frequency load balancing
is performed based on the reserved resources of each operator. If this NO
parameter is set to NON_SHARING, the eNodeB performs load
balancing without distinguishing operators and performs cell-level inter-
frequency load balancing.This parameter is dedicated to LTE FDD cells.

Indicates the proportion threshold for determining whether a neighboring

cell can be a target cell in load balancing. Providing that the number of
synchronized UEs in the serving cell is value "A" and that in a
neighboring cell is value "B", the proportion threshold is calculated by "A" NO
dividing the value of "A" minus "B". If a calculated proportion is greater
than this parameter value, the neighboring cell involved in the calculation
can be a target cell in load balancing.
Indicates whether the inter-RAT load balancing to UTRAN is performed
NO
only on UEs in hotspots.

Indicates the inter-frequency load balancing mode for UEs in idle mode.
If the Proportion check box under this parameter is selected, the eNodeB
transfers normally released UEs to frequencies based on the preset
NO
proportions for neighboring frequencies of the serving frequency so that
load balancing for UEs in idle mode is achieved. This parameter is valid
only when the Proportion check box is selected.
Indicates the threshold of the minimum number of synchronized UEs for
triggering inter-frequency load balancing. When the MlbTriggerMode
parameter is set to PRB_ONLY(PrbMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode), load balancing is
triggered if the PRB usage of the cell is greater than or equal to the sum
of InterFreqMlbThd and LoadOffset parameter values and the number of NO
synchronized UEs in the cell is greater than or equal to the sum of the
MlbMinUeNumThd and MlbMinUeNumOffset parameter values. Load
balancing stops when the PRB usage of the cell or the number of
synchronized UEs falls below the value of the InterFreqMlbThd
parameter or the value of the MlbMinUeNumThd parameter, respectively.
Indicates the offset of the minimum number of synchronized UEs for
triggering inter-frequency load balancing. If the MlbTriggerMode
parameter is set to PRB_ONLY(PrbMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode), inter-frequency load
balancing is triggered when the number of synchronized UEs in the cell NO
is greater than or equal to the sum of the MlbMinUeNumThd and
MlbMinUeNumOffset parameter values and the PRB usage of the cell is
greater than or equal to the sum the InterFreqMlbThd and LoadOffset
parameter values.
Indicates the type of UEs that are transferred for inter-frequency load
balancing (excluding blind load balancing).If the SynchronizedUE check
box is selected,synchronized UEs are transferred for inter-frequency
user-number-based load balancing.If the IdleUE check box is selected,
UEs in idle mode are transferred for inter-frequency user-number-based
load balancing.If the PrbMlbSynchronizedUE check box is selected,
synchronized UEs are transferred for inter-frequency PRB-based load
NO
balancing.This parameter is dedicated to LTE TDD cells.If the
PrbMlbIdleUE check box is selected, UEs in idle mode are transferred
for inter-frequency PRB-based load balancing.This parameter is
dedicated to LTE TDD cells.If multiple check boxes are selected, multiple
uplink synchronized UEs and UEs in idle mode are transferred for load
balancing.If no check box is selected, no UE is transferred for load
balancing.

Indicates the threshold of the number of synchronized UEs for triggering

inter-frequency load balancing to transfer to-be-released UEs. When the
MlbTriggerMode parameter is set to UE_NUMBER_ONLY(UeNumMode)
or PRB_OR_UE_NUMBER(PrbOrUeNumMode), inter-frequency load
balancing to transfer to-be-released UEs is triggered if the number of
NO
synchronized UEs in the cell is greater than or equal to the sum of the
InterFreqIdleMlbUeNumThd and MlbUeNumOffset parameter values.
Inter-frequency load balancing to transfer to-be-released UEs stops if the
number of synchronized UEs in the cell is less than the
InterFreqIdleMlbUeNumThd parameter value.
Indicates the threshold of the number of synchronized UEs for triggering
inter-RAT load sharing to transfer to-be-released UEs. Inter-RAT load
sharing to transfer to-be-released UEs is triggered if the number of
synchronized UEs is greater than or equal to the sum of the
InterRATIdleMlbUeNumThd and InterRatMlbUeNumOffset parameter
values and the PRB usage of the cell is greater than or equal to the sum NO
of the InterRatMlbThd and LoadOffset parameter values. Inter-RAT load
sharing to transfer to-be-released UEs stops if the number of
synchronized UEs is less than the InterRATIdleMlbUeNumThd
parameter value or the PRB usage of the cell is less than of the
InterRatMlbThd parameter value.

Indicates the evaluation period for determining whether to trigger inter-

frequency load balancing. If the serving cell remains in the heavy load
state within an evaluation period, inter-frequency load balancing is
triggered and certain UEs are transferred for load balancing. If the
UtranMlbSwitch or GeranMlbSwitch option of the MlbAlgoSwitch
parameter is selected, the InterFreqMlbSwitch or
InterFreqBlindMlbSwitch option of the MlbAlgoSwitch parameter is
NO
selected, and the FreqSelectStrategy parameter is set to
PRIORITYBASED(PriorityBased), the values of the InterRatLoadEvalPrd
and InterFreqLoadEvalPrd parameters must be the same. If the two
parameters are set to different values, the evaluation period specified by
the InterRatLoadEvalPrd parameter is adapted when both cell-level inter-
frequency load balancing and inter-RAT load sharing are triggered at the
same time.
Indicates the evaluation period for determining whether to trigger inter-
RAT load sharing. If the serving cell remains in the heavy load state
within an evaluation period, inter-RAT load sharing is triggered and
certain UEs are transferred to an inter-RAT neighboring cell. If the
UtranMlbSwitch or GeranMlbSwitch option of the MlbAlgoSwitch
parameter is selected, the InterFreqMlbSwitch or
InterFreqBlindMlbSwitch option of the MlbAlgoSwitch parameter is
NO
selected, and the FreqSelectStrategy parameter is set to
PRIORITYBASED(PriorityBased), the values of the InterRatLoadEvalPrd
and InterFreqLoadEvalPrd parameters must be the same. If the two
parameters are set to different values, the evaluation period specified by
the InterRatLoadEvalPrd parameter is adapted when both cell-level inter-
frequency load balancing and inter-RAT load sharing are triggered at the
same time.
Indicates the target frequency selection policy applied for inter-frequency
load balancing and inter-RAT load sharing when candidate cells work at
different frequencies. If this parameter is set to
FAIRSTRATEGY(FairStrategy), a frequency among all neighboring
frequencies of candidate cells is randomly selected as the target
frequency in inter-frequency load balancing, all inter-RAT neighboring
frequencies of candidate cells are selected as the target frequencies in
inter-RAT load sharing, and a maximum of three frequencies among all
neighboring frequencies of candidate cells are randomly selected as the
target frequencies in inter-frequency load balancing by transferring UEs
with low spectral efficiency.
If this parameter is set to PRIORITYBASED(PriorityBased), the
NO
frequency with the highest priority among all intra-RAT neighboring
frequencies and the frequency with the highest priority among all inter-
RAT frequencies are selected as target frequencies separately when
inter-frequency load balancing and inter-RAT load sharing are triggered
separately or both operator-level inter-frequency load balancing and
inter-RAT load sharing are triggered together; the frequency with the
highest priority among all neighboring frequencies when both cell-level
inter-frequency load balancing and inter-RAT load sharing are triggered
together; a maximum of three frequencies with the highest priorities
among all different frequencies are selected as target frequencies when
inter-frequency load balancing by transferring UEs with low spectral
efficiency is triggered.
Indicates the policy based on which the serving cell selects certain
neighboring cells as candidate cells for inter-frequency load balancing if
no neighboring cells are manually configured as overlapping neighboring
cells. If this parameter is set to ADAPTIVE(Adaptive), the
InterFreqMlbSwitch option of the MlbAlgoSwitch parameter is selected,
and the InterFreqBlindMlbSwitch option of the MlbAlgoSwitch parameter
is not selected, the serving cell selects certain intra-eNodeB inter-
frequency neighboring cells as candidate cells for load balancing when
the serving cell has at least one intra-eNodeB inter-frequency
neighboring cell or the serving cell selects certain inter-eNodeB inter-
frequency neighboring cells configured with X2 interfaces as candidate
cells for load balancing when the serving cell has no intra-eNodeB inter-
frequency neighboring cell. If this parameter is set to
ADAPTIVE(Adaptive), the InterFreqMlbSwitch option of the
MlbAlgoSwitch parameter is not selected, and the
InterFreqBlindMlbSwitch option of the MlbAlgoSwitch parameter is
selected, the serving cell selects certain inter-eNodeB inter-frequency
neighboring cells as candidate cells for inter-frequency load balancing. If
this parameter is set to ADAPTIVE(Adaptive), the InterFreqMlbSwitch
NO
option of the MlbAlgoSwitch parameter is selected, and the
InterFreqBlindMlbSwitch option of the MlbAlgoSwitch parameter is
selected, the serving cell selects certain intra-eNodeB inter-frequency
neighboring cells as candidate cells for inter-frequency load balancing
when the serving cell has at least one intra-eNodeB inter-frequency
neighboring cell or the serving cell selects certain inter-eNodeB inter-
frequency neighboring cells as candidate cells for load balancing when
the serving cell has no intra-eNodeB inter-frequency neighboring cell. If
this parameter is set to ALL(All), the InterFreqMlbSwitch option of the
MlbAlgoSwitch parameter is selected, and the InterFreqBlindMlbSwitch
option of the MlbAlgoSwitch parameter is not selected, the serving cell
selects all intra-eNodeB inter-frequency neighboring cells and inter-
eNodeB inter-frequency neighboring cells configured with X2 interfaces
as candidate cells for inter-frequency load balancing. If this parameter is
set to ALL(All) and the InterFreqBlindMlbSwitch option of the
MlbAlgoSwitch parameter is selected regardless the setting of the
InterFreqMlbSwitch option of the MlbAlgoSwitch parameter, the serving
cell selects all inter-frequency neighboring cells as candidate cells for
inter-frequency load balancing.
Indicates the offset to the number of uplink synchronized UEs in the cell
for triggering inter-RAT load sharing. When the PRB usage of the cell is
greater than or equal to the sum of the InterRatMlbThd and LoadOffset
parameter values and the number of uplink synchronized UEs in the cell
is greater than or equal to the sum of the InterRatMlbUeNumThd and
InterRatMlbUeNumOffset parameter values, PRB-usage-based inter-
NO
RAT load sharing is triggered if the InterRatMlbTriggerMode parameter is
set to IRAT_PRB_ONLY. When the number of uplink synchronized UEs
in the cell is greater than or equal to the sum of the
InterRatMlbUeNumModeThd and InterRatMlbUeNumOffset parameter
values, UE-number-based inter-RAT load sharing is triggered if the
InterRatMlbTriggerMode parameter is set to IRAT_UE_NUMBER_ONLY.

Indicates the frequency selection policy for inter-frequency idle MLB. If

this parameter is set to LOADINFOFREQ, frequencies capable of
obtaining load information can be used as the target frequencies for
inter-frequency MLB in idle mode. If this parameter is set to ALLFREQ, NO
all frequencies can be used as the target frequencies for inter-frequency
MLB in idle mode, including inter-frequency EARFCNs carrying or not
carrying information.This switch applies only to LTE TDD cells.
Indicates the strategy for selecting UEs in inter-RAT MLB triggered by
the PRB usage. If this parameter is set to
PRBRATIOHIGHMODE(PRBRATIOHIGHMODE), the eNodeB transfers
UEs whose PRB usage is greater than 2% but less than half of the
NO
LoadDiffThd parameter value. If this parameter is set to
PRBRATIOLOWMODE(PRBRATIOLOWMODE), the eNodeB transfers
UEs whose PRB usage is less than or equal to the
InterRatMlbUeSelPrbThd parameter value.

Indicates the PRB usage threshold for selecting UEs in inter-RAT load
sharing. If the InterRatMlbTriggerMode parameter is set to
IRAT_PRB_ONLY and the InterRatMlbUeSelStrategy parameter is set to
PRBRATIOLOWMODE, UEs whose PRB usage is less than or equal to
the InterRatMlbUeSelPrbThd parameter value are selected for PRB- NO
usage-based inter-RAT load sharing. If the InterRatMlbTriggerMode
parameter is set to IRAT_UE_NUMBER_ONLY, UEs whose PRB usage
is less than or equal to the InterRatMlbUeSelPrbThd parameter value
are selected for UE-number-based inter-RAT load sharing.

Indicates the PRB load calculation method when the Mobility Load
Balancing Trigger Mode parameter is set to PRB_ONLY or
PRB_OR_UE_NUMBER. The parameter value PRB_USAGE indicates
that the PRB load is calculated based on the PRB usage. The parameter
value PRB_VALUATION_WITH_CTRL indicates that the PRB load is
calculated based on the PRB evaluation for traffic channels and control
channels. The parameter value PRB_VALUATION_NO_CTRL indicates
NO
that the PRB load is calculated based on the PRB evaluation only for
traffic channels. If this parameter is set to PRB_USAGE, the PRB usage
of multiple cells is more likely to reach the maximum. If this parameter is
set to PRB_VALUATION_WITH_CTRL or PRB_VALUATION_NO_CTRL,
the transmission rate of each service is more likely to reach the
minimum. Set this parameter based on requirements. This parameter
applies only to LTE TDD cells.
Indicates the length of the timer for punishing UEs that are selected for
MLB but fail to be transferred to target cells. Before the timer expires, the NO
UEs cannot be transferred for MLB.
Indicates whether the eNodeB is allowed to initiate a handover to one of
the secondary strongest neighboring cells when the eNodeB cannot
initiate a handover to the strongest neighboring cell triggered by load-
information-exchange-based inter-frequency load balancing.
If this parameter is set to PERMIT_NON_STRONGEST_CELL(Permit
NO
Trying Non-Strongest Cell), the eNodeB is allowed to initiate a handover
to one of the secondary strongest neighboring cells in the preceding
scenario. If this parameter is set to ONLY_STRONGEST_CELL(Only Try
Strongest Cell), the eNodeB can only initiate a handover to the strongest
neighboring cell in the preceding scenario.

Indicates the triggering mode for inter-RAT load sharing by transferring

RRC_CONNECTED UEs. If this parameter is set to IRAT_PRB_ONLY,
inter-RAT load sharing is triggered based on the physical resource block
(PRB) usage and the number of UEs. If the PRB usage of the cell is
greater than or equal to the sum of the InterRatMlbThd and LoadOffset
parameter values and the number of uplink synchronized UEs in the cell
is greater than or equal to the sum of the InterRatMlbUeNumThd and
InterRatMlbUeNumOffset parameter values, PRB-usage-based inter-
RAT load sharing is triggered. If this parameter is set to NO
IRAT_UE_NUMBER_ONLY, inter-RAT load sharing is triggered only
based on the number of UEs. If the number of uplink synchronized UEs
in the cell is greater than or equal to the sum of the
InterRatMlbUeNumModeThd and InterRatMlbUeNumOffset parameter
values, UE-number-based inter-RAT load sharing is triggered. If this
parameter is set to IRAT_PRB_OR_UE_NUMBER, inter-RAT load
sharing can be triggered based on either PRB usage or the number of
UEs when the related triggering conditions are met.
Indicates the threshold for the number of uplink synchronized UEs in the
cell used to trigger UE-number-based inter-RAT load sharing. If the
number of uplink synchronized UEs in the cell is greater than or equal to
the sum of the InterRatMlbUeNumModeThd and
InterRatMlbUeNumOffset parameter values, UE-number-based inter-
RAT load sharing is triggered. If the number of uplink synchronized UEs
NO
in the cell is less than the InterRatMlbUeNumModeThd parameter value,
UE-number-based inter-RAT load sharing stops. If the
InterRatMlbTriggerMode parameter is set to
IRAT_PRB_OR_UE_NUMBER, it is recommended that the
InterRatMlbUeNumModeThd parameter be set to a value equal to or
greater than the InterRatMlbUeNumThd parameter value.

Indicates the number of load balancing periods used to determine

NO
whether to punish a frequency during load balancing.

Indicates the number of MLB punishment periods for a frequency during

which cells operating on this frequency cannot be selected as target cells NO
in load balancing.
Indicates the number of MLB punishment periods for a cell during which
NO
the cell cannot be selected as the target cell in load balancing.

Indicates the RRU-specific load calculation mode for load balancing in a

multi-RRU cell. This parameter applies only to LTE TDD cells.
When the PrbUsage check box is selected, RRU-specific load
NO
calculation mode for load balancing in a multi-RRU cell is used.
When the PrbUsage check box is deselected, RRU-specific load
calculation mode for load balancing in a multi-RRU cell is not used.
Indicates the PRB usage threshold used for transferring loads to
neighboring cells with which the source cell does not exchange load
information during inter-frequency load balancing. Consider that the
MlbTriggerMode parameter is set to PRB_ONLY(PrbMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode). If the PRB usage in the
source cell is greater than or equal to the sum of the InterFreqMlbThd
parameter value and the InterFreqOffloadOffset parameter value,
NO
neighboring cells with which the source cell does not exchange load
information can be selected as the target cells for load balancing, and
the source cell cannot be selected as a target cell for load balancing. If
the PRB usage in the source cell is less than the value calculated by the
InterFreqMlbThd parameter value plus the InterFreqOffloadOffset
parameter value and then minus the LoadOffset parameter value, the
source cell can be selected as a target cell for load balancing.
Indicates the UL-synchronized UE number threshold used for
transferring loads to neighboring cells with which the source cell does
not exchange load information during inter-frequency load balancing.
Consider that the MlbTriggerMode parameter is set to
UE_NUMBER_ONLY(UeNumMode) or
PRB_OR_UE_NUMBER(PrbOrUeNumMode). If the number of UL-
synchronized UEs in the source cell is greater than or equal to the sum
of the InterFreqMlbUeNumThd parameter value and the
InterFrqUeNumOffloadOffset parameter value, neighboring cells with NO
which the source cell does not exchange load information can be
selected as the target cells for load balancing, and the source cell cannot
be selected as a target cell for load balancing. If the number of UL-
synchronized UEs in the source cell is less than the value calculated by
the InterFreqMlbUeNumThd parameter value plus the
InterFrqUeNumOffloadOffset parameter value and then minus the
LoadOffset parameter value, the source cell can be selected as a target
cell for load balancing.

Indicates the scale factor used to determine the load balancing capability
of a cell. This factor helps adjust the load balancing target in UE-number-
based load balancing. The load balancing capability of a cell equals the
value calculated by the cell bandwidth (number of RBs) multiplied by the NO
CellCapacityScaleFactor parameter value. Load balancing with this
parameter taken effect aims to achieve even loads in each cell with the
same bandwidth.
Indicates the determination period used for triggering or stopping MLB. If
the cell load is greater than or equal to the MLB triggering threshold for a
consecutive period specified by this parameter, MLB is triggered.
NO
If the cell load is less than the MLB stopping threshold for a consecutive
period specified by this parameter, MLB is stopped. This parameter
applies only to LTE TDD cells.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates whether to ensure services for UEs running unlimited services
in the cell. This parameter includes the following switches:
UsUeGuaranteeSwitch: Indicates whether all parameters related to
service assurance for UEs running unlimited services take effect. Service
assurance for UEs running unlimited services work only when this switch
is on. UsHoSwitch: Indicates whether to enable unlimited-service-
supported-UE-based handovers. This type of handovers is enabled only
when this switch is on. UsCellReselSwitch: Indicates whether to enable
unlimited-service-supported-UE-based cell reselections. eNodeB
performs cell reselection for UEs running unlimited services to the
frequencies in the configured target frequency group only when this
switch is on. UsUePuschPcPrioritySwitch: Indicates whether to enable
optimization of closed-loop PUSCH power control for UEs running
unlimited services near the cell center. When this switch is on, the
optimization is enabled, preventing UEs running unlimited services near
the cell center from unnecessarily lowering PUSCH transmit power due
to inter-RAT or abrupt interference. Optimization on closed-loop PUSCH
power control for UEs running unlimited services near the cell center is
NO
enabled only when this switch is on. DlUsVoIPCqiAdjOptSwitch:
Indicates whether to enable optimization on downlink channel quality
indicator (CQI) adjustment for UEs running unlimited voice services.
When this switch is on, the optimization is on, accelerating the
convergence pace of initial block error rate (IBLER) of voice packets.
Optimization on downlink CQI adjustment is enabled for UEs running
unlimited voice services is enabled only when this switch is on.
UsCellNotDriveNsSwitch: Indicates whether to enable frequency steering
for UEs running normal services in a cell that serves UEs running
unlimited services. The eNodeB performs frequency steering for UEs
running normal services in a cell that serves UEs running unlimited
services only when this switch is on.
NsRbRestrictSwitch: Indicates whether to restrict RBs used for data
transmission of UEs running normal services. The RBs used for data
transmission of UEs running normal services are restricted only when
this switch is on. UsCtrlDRXSwitch: If this option is deselected, the DRX
functions for UE running unlimited services are not specially handled. If
this option is selected, the DRX functions for such UEs are disabled.

Indicates the minimum interval between two preallocations for UEs

running unlimited voice services. When the discontinuous reception
(DRX) algorithm switch is on and the UE is in the DRX state, the actual NO
value of this parameter does not exceed the DrxInactivityTimer
parameter value.

Indicates the minimum interval between two preallocations for UEs

running unlimited data services. When the discontinuous reception
(DRX) algorithm switch is on and the UE is in the DRX state, the actual NO
value of this parameter does not exceed the DrxInactivityTimer
parameter value.
Indicates the amount of data preallocated to a UE running unlimited
NO
voice services.

Indicates the amount of data preallocated to a UE running unlimited data

NO
services.

Indicates the duration of each smart preallocation for a UE running

NO
unlimited voice services.
Indicates the duration of each smart preallocation for a UE running
NO
unlimited data services.

Indicates the uplink target initial block error rate (IBLER) of UEs running
NO
unlimited voice services.

Indicates the minimum number of UEs running normal services that is

used in steering mobility management for such UEs when steering NO
mobility management for UEs running unlimited services is enabled.
Indicates the offset of the target signal to interference plus noise ratio
(SINR) on the PUCCH for UEs running unlimited services relative to the NO
target SINR on the PUCCH for UEs running normal services.

Indicates the offset of the reference signal received power (RSRP) upper
limit on the PUCCH for UEs running unlimited services to the RSRP NO
upper limit on the PUCCH for UEs running normal services.

Indicates the ID of the intra-RAT frequency priority group for UEs running
NO
unlimited data services.

Indicates the duration of service guarantee for UEs running unlimited

services during UE steering when steering mobility management for UEs NO
running unlimited services is enabled.
Indicates the interval at which the eNodeB triggers the A4-related
measurement for a UE running unlimited services during inter-frequency NO
handovers.

Indicates the reference signal received power (RSRP) threshold for

event A2 that triggers coverage-based inter-frequency handovers for
UEs running unlimited services. If the measured RSRP value is less than NO
this parameter value, such a UE sends a measurement report.This
parameter applies only to LTE FDD cells.
Indicates the reference signal received quality (RSRQ) threshold for
event A2 that triggers coverage-based inter-frequency handovers for
UEs running unlimited services. If the measured RSRQ value is less NO
than this parameter value, such a UE sends a measurement report.This
parameter applies only to LTE FDD cells.

Indicates the ID of the intra-RAT frequency priority group for UEs running
NO
unlimited voice services.

Indicates the ID of an intra-RAT frequency priority group for UEs running

NO
normal services.

Indicates the PA value allocated to UEs running unlimited services when

the PDSCH power assignment is even. If this parameter is set to a value
NO
less than the PA value that is allocated to UEs when the PDSCH power
assignment is even, this parameter does not take effect.
Indicates the offset of the signal to interference plus noise ratio (SINR)
upper limit on the PUSCH for UEs running unlimited services to the SINR NO
upper limit on the PUSCH for UEs running normal services.

Indicates the proportion of resource blocks (RBs) that UEs running

NO
normal services can use in a cell.

Indicates the length of timer for detecting UEs running unlimited

NO
services.
Indicates the downlink minimum guaranteed bit rate of the non-GBR
service for VIP users. A large value of this parameter increases the
downlink service scheduling priority for VIP users and the service rate is
more likely to be guaranteed. A small value of this parameter decreases NO
the downlink service scheduling priority for VIP users and the service
rate is less likely to be guaranteed. This parameter does not take effect if
it is set to 0. This parameter applies only to LTE TDD cells.
Indicates the uplink minimum guaranteed bit rate of the non-GBR service
for VIP users. A large value of this parameter increases the uplink
service scheduling priority for VIP users and the service rate is more
likely to be guaranteed. A small value of this parameter decreases the NO
uplink service scheduling priority for VIP users and the service rate is
less likely to be guaranteed. This parameter does not take effect if it is
set to 0. This parameter applies only to LTE TDD cells.

Indicates the interference rejection threshold in an intra-frequency

NO
neighboring cell of the local cell serving UEs running unlimited services.
Indicates the Local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the CCE aggregation level for common signaling. NO

Indicates the CCE ratio adjustment switch for the PDCCH. If this switch
is turned on, the resource allocation algorithm of the PDCCH
dynamically adjusts the UL and DL CCE ratios within each transmission NO
time interval (TTI) based on CCE usages in UL and DL. If this switch is
turned off, the UL and DL CCE ratios are not dynamically adjusted.
Indicates the threshold of isolation for determining whether to enable
PDCCH selective transmission in adaptive SFN/SDMA scenarios. For a
UE, if the ratio between the RSRP of strong signals and that of weak
NO
signals from multiple RRUs in an SFN cell is greater than or equal to the
value of this parameter, the power of weak signals is not transmitted.
This parameter applies only to LTE TDD cells.
Indicates the number of OFDM symbols initially occupied by the PDCCH.
If the switch for dynamic adjustment of the number of OFDM symbols
occupied by the PDCCH is turned off, this parameter indicates the
number of OFDM symbols that are always occupied by the PDCCH. For
LTE TDD cells, this parameter indicates the number of OFDM symbols
initially occupied by PDCCH where only the downlink scheduling and
controlling information is transmitted in downlink subframes. If the switch
for dynamic adjustment of the number of OFDM symbols occupied by
the PDCCH is turned on and the bandwidth is 1.4 MHz or 3 MHz, the NO
PDCCH occupies 4 or 3 OFDM symbols, respectively, and this
parameter is invalid. If the switch is turned on and the bandwidth is 5
MHz, 10 MHz, 15 MHz, or 20 MHz, the eNodeB adjusts the number of
OFDM symbols in the range of 1, 2, and 3 when this parameter is set to
the default value 1, or in the range of 2 and 3 when this parameter is set
to 2 or 3. For LTE TDD cells, if the switch is turned on and the bandwidth
is 5 MHz, the eNodeB adjusts the number of OFDM symbols in the
range of 2 and 3 by default, and this parameter is invalid.

Indicates the percentage of the number of virtually loaded PDCCH CCEs

when the PDCCH power control switch is turned off, or indicates the
percentage of the power of virtually loaded PDCCH CCEs when the
NO
PDCCH power control switch is turned on. This parameter is used to
analyze the impact of the parameter values on PDCCH demodulation
performance and provide reference to intra-frequency networking in LTE.
Indicates the switch used to enable or disable dynamic adjustment on
the number of orthogonal frequency division multiplexing (OFDM)
symbols occupied by the physical downlink control channel (PDCCH). If
this parameter is set to OFF, the number of OFDM symbols occupied by
the PDCCH is fixed and cannot be dynamically adjusted. If this
parameter is set to ON, the number of OFDM symbols occupied by the NO
PDCCH is dynamically adjusted based on the required number of
PDCCH control channel elements (CCEs). If this parameter is set to
ECFIADAPTIONON, the number of OFDM symbols occupied by the
PDCCH is dynamically adjusted based on the cell downlink throughput,
and the adjustment performance is the best among the three methods.
Indicates the upper limit for the CCE usage within each transmission
time interval (TTI). When the switch for dynamically adjusting the number
of OFDM symbols on the PDCCH is turned on, the parameter setting is NO
invalid, that is, the CCE usage within each TTI cannot be limited. This
parameter is valid only in TDD mode.

Indicates the switch used to enable or disable closed-loop adjustment to

the PDCCH aggregation level. If this switch is turned on, PDCCH
aggregation level is adjusted based on the block error rate (BLER) of the NO
PDCCH. If this switch is turned off, PDCCH aggregation level is not
adjusted based on the BLER of the PDCCH.
Indicates whether to enable virtual loading for Digital PreDistortion
NO
(DPD).This parameter is valid only for LTE TDD cells.

Indicates the virtual load type for Digital PreDistortion (DPD).This

NO
parameter is valid only for LTE TDD cells.
Indicates the policy for control channel element (CCE) aggregation level
selection of the physical downlink control channel (PDCCH) in dual-
codeword scenarios. In capacity-based CCE aggregation level selection
of the PDCCH, set this parameter to STRATEGYBASEDONCAPACITY.
In this situation, the average CCE aggregation level of the PDCCH in
dual-codeword scenarios decreases, and more UEs can be supported NO
on the PDCCH. In coverage-based CCE aggregation level selection of
the PDCCH, set this parameter to STRATEGYBASEDONCOVERAGE.
In this situation, both the average CCE aggregation level of the PDCCH
in dual-codeword scenarios and cell coverage performance increase.
This parameter is set to STRATEGYBASEDONCAPACITY by default.
Indicates whether to optimize PDCCH capacity expansion.
For LTE FDD networks, if this parameter is set to ON(On), (1) the initial
value for closed-loop adjustment on PDCCH aggregation level applies
only to SRBs; (2) if a UE fails to be allocated with CCEs, the eNodeB
reallocates CCEs to the UE by increasing the PDCCH power and
decreasing the PDCCH aggregation level for the UE. If this parameter is
set to OFF(Off), (1) the initial value for closed-loop adjustment on
PDCCH aggregation level applies to both SRBs and DRBs; (2) if a UE
fails to be allocated with CCEs, the eNodeB does not reallocate CCEs to
NO
the UE by increasing the PDCCH power and decreasing the PDCCH
aggregation level for the UE.
For LTE TDD networks, if this parameter is set to ON(On), the eNodeB
reallocates CCEs to a UE, if the UE fails to be allocated with CCEs, by
increasing the PDCCH transmit power and decreasing the PDCCH
aggregation level for the UE. If this parameter is set to OFF(Off), the
eNodeB does not reallocate CCEs to a UE, if the UE fails to be allocated
with CCEs, by increasing the PDCCH power and decreasing the PDCCH
aggregation level for the UE.

Indicates the maximum coding rate on the PDCCH. The coding rate on
the PDCCH cannot exceed this parameter value. Otherwise the PDCCH NO
aggregation level must be increase.
Indicates the number of OFDM symbols initially occupied by the PDCCH
where the downlink subframe indicating the uplink and downlink
scheduling and controlling information is transmitted. If the PDCCH
Symbol Number Adjust Switch parameter is set to OFF, this parameter
indicates the number of OFDM symbols occupied by the PDCCH where
the downlink subframe indicating the uplink and downlink scheduling and
controlling information is transmitted. For downlink subframes indicating
both uplink and downlink scheduling and controlling information, if the
NO
PDCCH Symbol Number Adjust Switch parameter is set to ON, the
number of OFDM symbols occupied by the PDCCH is as follows: On the
bandwidth of 5 MHz, the PDCCH occupies 2 or 3 OFDM symbols. (In
this case, the configuration of this parameter is invalid.) On the
bandwidth of 10 MHz, 15 MHz, or 20 MHz, the PDCCH occupies 1, 2, or
3 OFDM symbols when this parameter is set to 1, and the PDCCH
occupies 2 or 3 OFDM symbols when this parameter is set to 2 or 3. This
parameter is dedicated to LTE TDD cells.
Indicates the adaptive strategy of the PDCCH aggregation level. The
STRATEGYBASEDONCOVERAGE check box is selected for this
parameter by default. In this case, a higher aggregation level is applied,
and therefore the cell that the control channel serves has better
coverage. However, the number of scheduling UEs carried by the control NO
channel decreases. If the STRATEGYBASEDONCAPACITY check box is
selected, a lower aggregation level is applied, and the control channel
carries more scheduling UEs. This parameter is dedicated to LTE TDD
cells.
Indicates the hysteresis of control format indicator (CFI) number increase
caused by uplink preallocation failures when the PdcchSymNumSwitch
parameter is set to ECFIADAPTIONON. If the HysForCfiBasedPreSch NO
parameter is set to 0, preallocation failures do not trigger CFI number
increase.
Indicates the threshold of isolation for determining whether to enable
PDCCH SDMA in adaptive SFN/SDMA scenarios. For a UE, if the ratio
between the RSRP of RRUs with strong signals and that of RRUs with
NO
weak signals in an SFN cell is equal to or greater than the value of this
parameter, the UE only use resources of RRUs with strong signals while
RRUs with weak signals can be reused by other UEs.
Indicates whether to enable the mechanism of increasing the control
channel element (CCE) resource allocation success rate in the uplink.
ReserveCommonCCESwitch: Indicates whether to reserve CCE
NO
resources in the common search space for the uplink. CCE resources in
the common search space are reserved for the uplink only when this
switch is on.

Indicates the maximum ratio of the uplink and downlink initial CCEs on
the PDCCH. If this parameter is set to 1_2, the maximum uplink-downlink
initial CCE ratio is 1:2. If this parameter is set to a value greater than
1_2, the maximum uplink-downlink initial CCE ratio can be dynamically
changed to any value ranging from 1_2 to the configured value based on NO
the load in the uplink and downlink. If subframe configuration 2 is
adopted for a TDD cell, it is recommended that the
SubframeSchDiffSwitch check box be selected to ensure the PRB usage
on subframes 3 and 8.
Indicates whether to enable enhanced PDCCH power control. If this
switch is turned on, the eNodeB selects appropriate PDCCH transmit
NO
power based on channel quality to increase PDCCH capacity. This
parameter is valid only for FDD, not for TDD.

Indicates the target BLER in PDCCH link adaptation. The PDCCH BLER
NO
must converge on this target BLER.
Indicates whether to enable enhanced aggregation level selection of
access signaling on high load networks. If this parameter is set to
ON(On), the eNodeB accurately estimates the channel conditions when
a UE accesses a high load network where PDCCH resources are
insufficient, and selects a PDCCH aggregation level for the UE that
better matches the UE's actual signal quality. It is recommended that this NO
parameter be set to ON(On) and the
PuschDtxSchOptSwitch(PuschDtxSchOptSwitch) check box be selected
under the UlSchSwitch parameter in the CellAlgoSwitch MO. If this
parameter is set to OFF(Off), the eNodeB selects a high aggregation
level for all access signaling to ensure the PDCCH reliability.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the threshold for the low load state of the SRI resources. The
SRI resources enter the low load state if the PUCCH resource allocation
NO
algorithm detects that the number of admitted UEs is smaller than the
value of this parameter.
Indicates whether the cell supports scheduling request indicator (SRI)
reconfiguration. This parameter setting takes effect only when
PucchSwitch of the PucchAlgoSwitch parameter is on and the
SriAdaptiveSwitch parameter is set to ON. If the SriReCfgInd parameter
is set to TRUE, the cell supports SRI reconfiguration. In large traffic
scenarios, SRI reconfiguration can be performed on UEs with short SRI NO
periods to decrease the probability that the maximum SRI period (80 ms)
is configured. In this way, user experience in the cell improves. If the
SriReCfgInd parameter is set to FALSE, the cell does not support SRI
reconfiguration. This parameter applies only to cells served by LTE FDD
macro eNodeBs equipped with LBBPd or UBBPd.
Indicates the working mode of the SRI period adaptation.
SriAdaptiveHoldForVoIPSW: Indicates whether to enable SRI period
configuration adaptation for VoLTE UEs during SRI resource
adjustments. If this option is selected, during SRI resource adjustments,
the eNodeB adaptively configures the SRI period based on the load for
VoLTE UEs that newly access the local cell, are handed over to the local
cell, and have RRC connections reestablished to the local cell. If the
number of UEs is small, the SRI period configured based on the load is
shorter than the fixedly configured long SRI period, thereby increasing
the MOS of VoLTE UEs during SRI resource adjustments. If this option is
deselected, during SRI resource adjustments, the eNodeB fixedly
configures a long SRI period for such UEs. This option takes effect only
when the PucchSwitch option of the PucchAlgoSwitch parameter is
NO
selected and the SriPeriodAdaptive parameter is set to ON(On).
SriPeriodCfgOptSW: Indicates whether to enable SRI period
configuration optimization. If this option is selected, the eNodeB
configures the SRI period for UEs only based on the SRI resource usage
in the cell, and configures a short SRI period for a large number of UEs
when the cell serves CA UEs or VoLTE UEs, thereby increasing available
PUCCH resources and decreasing available PUSCH resources. If this
option is deselected, the eNodeB configures SRI periods for UEs based
on the SRI resources usage, semi-persistent ACK resource usage, and
dynamic ACK resource usage in the cell. The eNodeB configures a short
SRI period for a small number of UEs when the cell serves CA UEs or
VoLTE UEs, thereby decreasing available PUCCH resources and
increasing PUSCH resources.

Indicates the local ID of the cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the interval in which falls the number of UEs in

RRC_CONNECTED mode. Eleven intervals are divided based on this
parameter value (referred as "N"): [0, N/10), [N/10, 2N/10), [2N/10,
3N/10), [3N/10, 4N/10), [4N/10, 5N/10), [5N/10, 6N/10), [6N/10, 7N/10),
[7N/10, 8N/10), [8N/10, 9N/10), [9N/10, N), and [N, infinity). Each interval
corresponds to a set of performance counters. The number of UEs in
RRC_CONNECTED mode is periodically sampled, and the interval in
which falls the number of UEs in RRC_CONNECTED mode can be
determined. All performance counters corresponding to the interval NO
increase by one if related conditions are met. For detailed descriptions
about the performance counters controlled by this parameter, see
"Description" of the L.Traffic.User function subset in eNodeB
Performance Counter Reference. To ensure that all sampled numbers of
UEs in RRC_CONNECTED mode fall in proper intervals, set this
parameter based on the number of UEs in the cell. For example, if the
average number of UEs in the cell is large, set this parameter to a larger
value; otherwise, set this parameter to a smaller value.
Indicates whether to enable uplink IBLER optimization. If this switch is
turned on, the TBs in the DTX state are not taken into account for the
IBLER based on the PUSCH DTX detection result. This switch takes
effect only when subframe configuration 2 or 5 is used. If a TDD cell is
NO
established on an LBBPc, PUSCH DTX detection is not supported. If this
switch is turned on when PuschDtxSchOptSwitch check boxes are
cleared, this switch does not take effect. The uplink IBLER is not
affected. This switch applies only to LTE TDD networks.

Indicates whether to enable cell-level algorithms related to performance

counters. This parameter includes the following options:
BasedA3EdgeUserSwitch: Indicates whether to enable A3-based cell
NO
edge user (CEU) identification. If this option is selected, the eNodeB
starts to identify CEUs based on A3-related measurement reports and
collects related performance counters based on the identified CEUs.
Indicates the offset for cell edge user (CEU) identification event A3. This
offset is the difference between the signal quality of a neighboring cell
and that of the serving cell. A larger value of this parameter results that
better signal quality of the neighboring cell is required for the reporting of NO
CEU identification event A3 and the eNodeB has a lower probability of
identifying a UE as a CEU. A smaller value of this parameter results in a
higher probability that a UE is identified as a CEU.

Indicates the upper bound of range 0 (which also serves as the lower
bound of range 1) of the downlink throughput distribution measured by
performance counters. The range 0 is (0, DlThrpPdfThd0), and the range
1 is [DlThrpPdfThd0, DlThrpPdfThd1). For details about the performance NO
counters associated with this parameter, see "Description" of the
performance counters measuring the downlink throughput distribution in
Performance Counter Reference.

Indicates the upper bound of range 1 (which also serves as the lower
bound of range 2) of the downlink throughput distribution measured by
performance counters. The range 1 is [DlThrpPdfThd0, DlThrpPdfThd1),
and the range 2 is [DlThrpPdfThd1, DlThrpPdfThd2). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 2 (which also serves as the lower
bound of range 3) of the downlink throughput distribution measured by
performance counters. The range 2 is [DlThrpPdfThd1, DlThrpPdfThd2),
and the range 3 is [DlThrpPdfThd2, DlThrpPdfThd3). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 3 (which also serves as the lower
bound of range 4) of the downlink throughput distribution measured by
performance counters. The range 3 is [DlThrpPdfThd2, DlThrpPdfThd3),
and the range 4 is [DlThrpPdfThd3, DlThrpPdfThd4). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.
Indicates the upper bound of range 4 (which also serves as the lower
bound of range 5) of the downlink throughput distribution measured by
performance counters. The range 4 is [DlThrpPdfThd3, DlThrpPdfThd4),
and the range 5 is [DlThrpPdfThd4, DlThrpPdfThd5). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 5 (which also serves as the lower
bound of range 6) of the downlink throughput distribution measured by
performance counters. The range 5 is [DlThrpPdfThd4, DlThrpPdfThd5),
and the range 6 is [DlThrpPdfThd5, DlThrpPdfThd6). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 6 (which also serves as the lower
bound of range 7) of the downlink throughput distribution measured by
performance counters. The range 6 is [DlThrpPdfThd5, DlThrpPdfThd6),
and the range 7 is [DlThrpPdfThd6, DlThrpPdfThd7). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 7 (which also serves as the lower
bound of range 8) of the downlink throughput distribution measured by
performance counters. The range 7 is [DlThrpPdfThd6, DlThrpPdfThd7),
and the range 8 is [DlThrpPdfThd7, DlThrpPdfThd8). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the downlink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 8 (which also serves as the lower
bound of range 9) of the downlink throughput distribution measured by
performance counters. The range 8 is [DlThrpPdfThd7, DlThrpPdfThd8),
and the range 9 is [DlThrpPdfThd8, Infinity). For details about the NO
performance counters associated with this parameter, see "Description"
of the performance counters measuring the downlink throughput
distribution in Performance Counter Reference.

Indicates the upper bound of range 0 (which also serves as the lower
bound of range 1) of the uplink throughput distribution measured by
performance counters. The range 0 is (0, UlThrpPdfThd0), and the range
1 is [UlThrpPdfThd0, UlThrpPdfThd1). For details about the performance NO
counter associated with this parameter, see "Description" of the
performance counters measuring the uplink throughput distribution in
Performance Counter Reference.

Indicates the upper bound of range 1 (which also serves as the lower
bound of range 2) of the uplink throughput distribution measured by
performance counters. The range 1 is [UlThrpPdfThd0, UlThrpPdfThd1),
and the range 2 is [UlThrpPdfThd1, UlThrpPdfThd2). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.
Indicates the upper bound of range 2 (which also serves as the lower
bound of range 3) of the uplink throughput distribution measured by
performance counters. The range 2 is [UlThrpPdfThd1, UlThrpPdfThd2),
and the range 3 is [UlThrpPdfThd2, UlThrpPdfThd3). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 3 (which also serves as the lower
bound of range 4) of the uplink throughput distribution measured by
performance counters. The range 3 is [UlThrpPdfThd2, UlThrpPdfThd3),
and the range 4 is [UlThrpPdfThd3, UlThrpPdfThd4). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 4 (which also serves as the lower
bound of range 5) of the uplink throughput distribution measured by
performance counters. The range 4 is [UlThrpPdfThd3, UlThrpPdfThd4),
and the range 5 is [UlThrpPdfThd4, UlThrpPdfThd5). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 5 (which also serves as the lower
bound of range 6) of the uplink throughput distribution measured by
performance counters. The range 5 is [UlThrpPdfThd4, UlThrpPdfThd5),
and the range 6 is [UlThrpPdfThd5, UlThrpPdfThd6). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 6 (which also serves as the lower
bound of range 7) of the uplink throughput distribution measured by
performance counters. The range 6 is [UlThrpPdfThd5, UlThrpPdfThd6),
and the range 7 is [UlThrpPdfThd6, UlThrpPdfThd7). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 7 (which also serves as the lower
bound of range 8) of the uplink throughput distribution measured by
performance counters. The range 7 is [UlThrpPdfThd6, UlThrpPdfThd7),
and the range 8 is [UlThrpPdfThd7, UlThrpPdfThd8). For details about NO
the performance counters associated with this parameter, see
"Description" of the performance counters measuring the uplink
throughput distribution in Performance Counter Reference.

Indicates the upper bound of range 8 (which also serves as the lower
bound of range 9) of the uplink throughput distribution measured by
performance counters. The range 8 is [UlThrpPdfThd7, UlThrpPdfThd8),
and the range 9 is [UlThrpPdfThd8, Infinity). For details about the
NO
performance counters associated with this parameter, see "Description"
of the performance counters measuring the uplink throughput distribution
in
Performance Counter Reference.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the type of the cell frame offset.
CustomFrameOffset: indicates a user-defined frame offset.
TL_FrameOffst: indicates the frame offset automatically set based on the
subframe configuration in a TD-SCDMA+LTE TDD dual-mode network. NO
TL_FrameOffset_SA2_SSP5: indicates the frame offset automatically set
based on the subframe configuration 2 and special subframe
configuration 5 in a TD-SCDMA+LTE TDD dual-mode network.

Indicates the time delay of the frame start time for all TDD E-UTRAN
NO
cells to the time of the reference clock.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the time when the cell no-traffic detection starts. If the stop time
is earlier than or the same as the start time, the end time is assumed to
be a time of the next day. If the timer for reporting the no-traffic alarm is NO
not set to 0, the eNodeB performs the cell no-traffic detection from the
start time to the stop time.

Indicates the time when the cell no-traffic detection stops. If the stop time
is earlier than or the same as the start time, the stop time is assumed to
be a time of the next day. If the timer for reporting the no-traffic alarm is NO
not set to 0, the eNodeB performs the cell no-traffic detection from the
start time to the stop time.
Indicates the length of the timer for the cell no-traffic detection. If there is
no traffic in the cell within the duration specified by this parameter, the
eNodeB reports the no-access alarm and resets the cell. If this
parameter is set to 0, the cell no-traffic detection is not performed. If the NO
timer for reporting the no-traffic alarm is set to a non-zero value, the
eNodeB performs the cell no-traffic detection from the start time to the
stop time.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the band division scheme used in uplink ICIC. The band
division in the cell is changed according to the setting of this parameter
so that the edge bands do not overlap between neighboring cells. If this NO
parameter is set to INVALID, the cell does not distinguish center and
edge bands.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the number of RBs that are interfered by GERAN at each end
of the LTE DL frequency band. If the numbers of such RBs are different
at both ends, the larger number is used as the value of this parameter. NO
If this parameter is set to 3, three RBs are interfered by GERAN at each
end of the LTE DL frequency band and altogether six RBs are interfered.

Indicates the SINR threshold for determining whether DL RB resources

of an E-UTRAN cell using the LTE frequency spectrum that overlaps the
GSM frequency spectrum are available. If the result of the local cell
RSRP plus 11.2 and minus the RSSI of the GERAN cell that brings the
severest interference is greater than the value of this parameter, UEs NO
can use these RB resources. Otherwise, UEs cannot use these RB
resources. UEs measure the local cell RSRP and the RSSI of the
GERAN cell that brings the severest interference and report the
measurement results to the eNodeB.

Indicates the Local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the ratio of uplink subframes used as relay subframes. The

total number of subframes in each radio frame is 10. For example, the
value 2/10 indicates that two uplink subframes in each radio frame are
used as relay subframes. In the LTE TDD system, the number of uplink
subframes used for common UEs is calculated by subtracting the
number of uplink subframes used as relay subframes from the number of
NO
uplink subframes specified by the subframe configuration. Relay
subframes are preferentially scheduled for relay remote nodes (RRN)s
while common subframes are preferentially scheduled for common UEs.
If the relay subframes are not used up, they can be used for scheduling
for common UEs and if the common subframes are not used up, they
can be used for scheduling for RRNs.
Indicates the ratio of downlink subframes used as relay subframes. The
total number of subframes in each radio frame is 10. For example, the
value 2/10 indicates that two downlink subframes in each radio frame are
used as relay subframes. In the LTE TDD system, the number of
downlink subframes used for common UEs is calculated by subtracting
the number of downlink subframes used as relay subframes from the
NO
number of downlink subframes specified by the subframe configuration.
Relay subframes are preferentially scheduled for relay remote nodes
(RRNs) while common subframes are preferentially scheduled for
common UEs. If the relay subframes are not used up, they can be used
for scheduling for common UEs and if the common subframes are not
used up, they can be used for scheduling for RRNs.

Indicates the minimum interval between uplink preallocations for a relay

remote node (RRN). The interval between two preallocations for the NO
same RRN cannot be smaller than the value of this parameter.

Indicates the uplink preallocation data volume of a relay remote node

(RRN), that is, the data volume that can be transmitted during an RRN NO
preallocation.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the index of a simulated load configuration. One eNodeB can

store a maximum of 10 simulated load configurations. They are identified
by indexes ranging from 0 to 9 and correspond to RB usage thresholds
(specified by the SimuLoadRbThd parameter) 10% to 100% at a step of
NO
10%. For example, the RB usage thresholds for simulated load
configurations 1 and 4 are 20% and 50%, respectively. Alternatively, you
can also manually specify the RB usage threshold for a simulated load
configuration by setting the SimuLoadRbThd parameter.
Indicates the transmission mode adopted by the simulated load
configuration, including:
TM1: indicates transmission mode 1 for the simulated load configuration.
TM2: indicates transmission mode 2 for the simulated load configuration.
TM4: indicates transmission mode 4 for the simulated load configuration.
NO
TM7: indicates transmission mode 7 for the simulated load configuration.
TM8: indicates transmission mode 8 for the simulated load configuration.
TM9: indicates transmission mode 9 for the simulated load configuration.
The values TM4 and TM9 apply to cells where 4T/8T MIMO is enabled
and are used to simulate 4T/8T scrambling.

Indicates the PMI in scenarios of simulated load configuration with

NO
transmission mode 4 or 9.

Indicates the number of RBs allocated to a simulated load configuration

NO
in downlink scheduling.

Indicates the number of RBs allocated for commercial services in

NO
downlink scheduling.

Indicates the power allocated to a simulated load configuration in

NO
downlink scheduling.

Indicates the power allocated for commercial services in downlink

NO
scheduling.

Indicates the number of UEs allocated by a simulated load configuration

NO
in downlink scheduling.

Indicates the number of users to be scheduled in each transmission time

NO
interval (TTI) in downlink scheduling.

Indicates the local identity of the cell. It uniquely identifies a cell within an
YES
eNodeB. This parameter applies only to FDD cells.

Indicates the ID of an edge physical cell's sector equipment used by an

SFN cell. It uniquely identifies a set of sector equipment within an YES
eNodeB. This parameter applies only to FDD cells.
Indicates the MCC of a neighboring SFN cell.
A PLMN ID is composed of an MCC and an MNC.
The MCC consists of three digits.
NO
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345. This parameter applies only to FDD cells.

Indicates the MNC of a neighboring SFN cell.

A PLMN ID is composed of an MCC and an MNC.
The MCC consists of three digits.
NO
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345. This parameter applies only to FDD cells.

Indicates the eNodeB ID of a neighboring SFN cell. This parameter

NO
applies only to FDD cells.

Indicates the ID of a neighboring SFN cell. This parameter applies only

NO
to FDD cells.

Indicates the ID of an edge physical cell's sector equipment of a

NO
neighboring SFN cell. This parameter applies only to FDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the modification period coefficient for the BCCH. BCCH

modification period is equal to Modification period coefficient multiplies
Default paging cycle, where the BCCH modification period and default NO
paging cycle are measured in unit of radio frames, and the modification
period coefficient is specified by this parameter.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the offset of the PCFICH transmit power relative to the
NO
reference signal power.
Indicates the offset of the PBCH transmit power relative to the reference
NO
signal power.
Indicates the offset of the transmit power for the cell synchronization
NO
signals relative to the reference signal power.
Indicates the offset of the transmit power for broadcast information on
NO
the PDSCH channel relative to the reference signal power.
Indicates the offset of the transmit power for the paging information on
NO
the PDSCH channel relative to the reference signal power.
Indicates the offset of the transmit power for the random access
NO
responses on the PDSCH channel relative to the reference signal power.
Indicates the offset of the pilot power relative to the reference signal
NO
power.

Indicates the transmit power for the entire channel bandwidth at each
antenna connector. If the AntRsPwrSwitch option of the RepeaterSwitch
parameter is selected, this parameter value is used to calculate the NO
reference signal (RS) power to be delivered in system information block
type 2 (SIB2).
Indicates the offset of PMCH power to the maximum PDSCH power. The
maximum PDSCH power is calculated by using the formula:
Max(P_PDSCH_A, P_PDSCH_B). For details about formulas to NO
calculate PDSCH_A and PDSCH_B, see section "Basics of PDSCH
Power Calculation" in Power Control Feature Parameter Description.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the cell reference signal power of each physical antenna.

However, the cell reference signal power delivered in SIB2 is that of NO
each logical antenna.
Indicates the scaling factor index of the Energy Per Resource Element
(EPRE) on the PDSCH. This scaling factor is determined by the value of NO
this parameter and the antenna port. For details, see 3GPP TS 36.213.

Indicates the cell reference signal power headroom of each physical

NO
antenna. This parameter applies only to LTE TDD cells.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the step by which the TX power for random access preambles
is increased each time after a RACH access failure. If multiple attempts
to access the PRACH fail, the UE increases the TX power for random
NO
access preambles by a step specified by this parameter each time after
an access failure to ensure successful access.
For details, see 3GPP TS 36.321.
Indicates the target UE transmit power for the PRACH expected by the
eNodeB when PRACH preamble format 0 is applied on condition that
NO
requirements for preamble detection performance are met.
For details, see 3GPP TS 36.321.

Indicates the length index for the Zadoff-Chu sequence that generates
the random access preamble.For details about this parameter,see 3GPP NO
TS 36.211.

Indicates the threshold for determining the size of Msg3 when a UE

selects a preamble from random access preamble group A during a
NO
random access procedure.
For details, see 3GPP TS 36.321.
Indicates the offset to the starting position of each PRACH in the
NO
frequency domain of the FDD cell.

Indicates whether to configure the PRACH configuration index of the

cell.If an LTE TDD cell is established on an LBBPc, the PRACH
NO
configuration index of the cell does not take effect even if this parameter
is set to CFG(Configure).
Indicates the PRACH configuration index of the cell. If cells are
established on an LBBPc in a 4T4R scenario, the PRACH configuration NO
indexes of different cells must be separated in the time domain.

Indicates the maximum number of preamble transmission times. For

NO
details about this parameter, see 3GPP TS 36.321.
Indicates the period that a UE waits for message 4 (Msg4) during a
random access (RA) procedure. This timer starts when a UE initially
sends or resends message 3 (Msg3). If the UE receives Msg4 or the
NACK to Msg3 before the timer expires, the timer stops. If the UE does NO
not receive either message until the timer expires, the RA fails, and the
UE must reinitiate an RA procedure. For details about this parameter,
see 3GPP TS 36.321.

Indicates the maximum number of HARQ retransmissions of the

NO
message 3. For details about this parameter, see 3GPP TS 36.321.

Indicates the proportion of the number of random preambles in a cell to

the number of preambles in the cell. The number of random preambles
in a cell is calculated by this parameter value multiplied by the number of
preambles in the cell. Preambles in a cell can be classified as random NO
preambles and dedicated preambles, which are used for contention-
based random access and non-contention-based random access,
respectively. For details, see section 5.1.1 in 3GPP TS 36.321.
Indicates the proportion of the number of group A random preambles in a
cell to the number of random preambles in the cell. The number of group
A random preambles in a cell is calculated by this parameter value
multiplied by the number of random preambles in the cell. Preambles in
NO
a cell can be classified as random preambles and dedicated preambles,
and random preambles are classified into group A random preambles
and group B random preambles. For details, see section 5.1.1 in 3GPP
TS 36.321.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the index of the SRS subframe configuration for the cell. The
value SCn, where n is variable, represents configuration n. For example,
the value SC0 indicates subframe configuration 0, and the value SC1
indicates subframe configuration 1. If the cell operates in FDD mode, the
value SC15 is reserved. If the cell operates in TDD mode, the values
NO
SC14 and SC15 are reserved. The reserved values cannot be used. For
the relationship between the subframe configuration index and the cell-
specific subframe cycle/offset, see 3GPP TS 36.211. In FDD mode, this
parameter is permanently valid. In TDD mode, this parameter is valid
only if TddSrsCfgMode is set to EXPERIENCE_FIRST.
Indicates whether the sounding reference signal (SRS) of a UE and the
ACK/NACK or scheduling request (SR) on the PUCCH are allowed to
use the same time resources for simultaneous transmission.
If this parameter is set to BOOLEAN_FALSE, simultaneous transmission
is not allowed. In this situation, the UE discards the SRS and only NO
transmits the ACK/NACK or SR on the PUCCH.
If this parameter is set to BOOLEAN_TRUE, simultaneous transmission
is allowed. In this situation, the UE transmits truncated ACK/NACK or
SR. For details, see 3GPP TS 36.211.
Indicates whether to configure sounding reference signal (SRS)
resources for UEs in a cell. The value BOOLEAN_TRUE indicates that
SRS resources are available in the cell and can be configured for UEs in
the cell. The value BOOLEAN_FALSE indicates that no SRS resource is
available in the cell, and therefore no UE in the cell is configured with
SRS resources. This parameter does not take effect on: (1) FDD cell that NO
is established on an LBBPc and uses four or more RX antennas. (2)
FDD cell that is established on an LBBPc and uses extended cyclic
prefix (CP) in the uplink. (3) TDD cell established on an LBBPc. If this
parameter does not take effect on a cell but SRS resources are available
in the cell, SRS resources can be configured for UEs in the cell.
Indicates the TDD SRS configuration to be used. If this parameter is set
to ACCESS_FIRST, the TDD SRS configuration that is designed to
preferentially guarantee the specifications (for example, accessed UEs
and CAPS) is used. If this parameter is set to EXPERIENCE_FIRST, the
TDD SRS configuration that is designed to preferentially guarantee user
experience (for example, beamforming performance) is used. CAPS is
short for call attempt per second. If this parameter is set to
EXPERIENCE_ENHANCED, users can experience better downlink
services than ACCESS_FIRST mode. If this parameter is set to NO
ACCESS_ENHANCED, more UEs can access the network than
EXPERIENCE_ENHANCED mode.The parameter value
EXPERIENCE_ENHANCED and ACCESS_ENHANCED are not
supported by the LBBPc. If a cell is established on an LBBPc but this
parameter is set to EXPERIENCE_ENHANCED or
ACCESS_ENHANCED, the value of this parameter is automatically
changed to ACCESS_FIRST when this parameter takes effect.This
parameter is valid only in TDD mode.
Indicates the allocation mode of sounding reference signal (SRS)
resources in LTE FDD. This parameter must be set when the SrsCfgInd
parameter is set to BOOLEAN_TRUE(True). If the FddSrsCfgMode
parameter is set to DEFAULTMODE(Default Mode), SRS resource
allocation is activated by default after a cell is established, and SRS
resources are allocated to UEs that access the cell. If this parameter is
set to ADAPTIVEMODE(Adaptive Mode), SRS resource allocation can
NO
be adaptively activated or deactivated based on the cell load. After this
parameter is set to ADAPTIVEMODE(Adaptive Mode), settings of
parameters SrsAlgoSwitch, SrsSubframeCfg, and UserSrsPeriod do not
take effect. The parameter value ADAPTIVEMODE(Adaptive Mode) is
recommended in heavy-traffic scenarios where there is a large number
of UEs in the cell. The parameter value ADAPTIVEMODE(Adaptive
Mode) does not apply to cells established on an LBBPc.

Indicates the cell-specific SRS bandwidth. It corresponds to the srs-

BandwidthConfig parameter in the protocol. For details, see 3GPP TS NO
36.211.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the PHICH duration type. If this parameter is set to NORMAL,
the number of OFDM symbols occupied by the PDCCH is automatically
adjusted. If this parameter is set to EXTENDED, the number of OFDM
NO
symbols occupied by the PDCCH is fixed. Specifically, this number is
fixed to 3 or 4 for 1.4 MHz cells and 3 for cells with other bandwidths. For
the mapping between the type and the duration, see 3GPP TS 36.211.

Indicates a coefficient that is used to calculate the resources used by the

PHICH for the cell. It corresponds to the Ng parameter in the protocol. NO
For details on the usage of the Ng parameter, see 3GPP TS 36.211.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the default paging period for the cell. It is also called the
discontinuous reception (DRX) period. If the EPC specifies a DRX period
for a UE, the UE compares this period with the value of this parameter
and uses the smaller one as its DRX period. If the EPC does not specify NO
a DRX period, the UE uses the value of this parameter, which is
delivered in the system information, as its DRX period. For details, see
3GPP TS 36.304.

Indicates the number of paging occasions (a type of subframe) within a

paging period. This parameter value also indicates the number of paging NO
groups within a paging period. For details, see 3GPP TS 36.304.
Indicates the number of paging messages transmitted to UEs over the
NO
air interface.
Indicates the maximum number of UEs that can be included in a paging
NO
message on each paging occasion.
Indicates a paging message sending policy. There are two policies: first
in first out (FIFO) and priority differentiation. FIFO means that paging
messages that arrive earlier are preferentially sent in a paging occasion. NO
Priority differentiation means higher-priority paging messages are
preferentially sent in a paging occasion.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES
Indicates the number of PUSCH sub-bands.
NO
For details, see 3GPP TS 36.211.

Indicates the hopping mode of the PUSCH.

NO
For details, see 3GPP TS 36.211.
Indicates the hopping offset of the PUSCH.
NO
For details, see 3GPP TS 36.211.
Indicates whether group hopping of the PUSCH is enabled.
NO
For details, see 3GPP TS 36.211.
Indicates the group assignment of the PUSCH.
NO
For details, see 3GPP TS 36.211.
Indicates whether sequence hopping of the PUSCH is enabled.
NO
For details, see 3GPP TS 36.211.

Indicates the cyclic shift of the PUSCH.

NO
For details, see 3GPP TS 36.211.
Indicates whether 64QAM of the PUSCH is enabled.
NO
For details, see 3GPP TS 36.211.

Indicates the local ID of the cell. It uniquely identifies a cell within a BS. YES

Indicates the interval between cyclic shifts used for the PUCCH. The
interval between cyclic shifts used for the PUCCH can be acquired
based on the average delay spread in the cell, where the average delay
spread is acquired based on the networking environment. The parameter
value DS1_DELTA_SHIFT is not supported by the LBBPc. If a cell is NO
established on an LBBPc but this parameter is set to
DS1_DELTA_SHIFT, the value of this parameter is automatically
changed to DS2_DELTA_SHIFT when this parameter takes effect. For
details, see 3GPP TS 36.211.
Indicates the number of resource indexes allocated to SRI and semi-
persistent ACK at the RRC layer for the cell. If this parameter is set to 0, NO
UEs may fail to access the cell.

Indicates the number of RBs allocated to the CQI at the RRC layer of
NO
cell.
Indicates the total number of RBs at the two ends of the system band
that are reserved for the PUSCH. This parameter is valid only when the
PUCCH flexible configuration switch (PucchFlexCfgSwitch) is turned on.
The parameter setting must consider the number of RBs used by the
NO
PRACH, SRS, and PUCCH as well as the number of RBs compressed. If
the parameter setting exceeds the system bandwidth capability and
accordingly affects the preceding RB resource allocation, the cell cannot
be established successfully.

Indicates the number of code channels that reserved for the cell semi-
NO
persistent ACKs and SRIs.
Indicates the mode for allocating PUCCH format 1/1a/1b code channel
resources. The setting of this parameter takes effect only when the
DeltaShift parameter is set to DS1_DELTA_SHIFT. If the
Format1ChAllocMode parameter is set to FIXEDMODE, consecutive NO
PUCCH format 1/1a/1b code channel resources are always allocated. If
the Format1ChAllocMode parameter is set to RANDOMMODE, PUCCH
format 1/1a/1b code channel resources are randomly allocated.
Indicates whether to enable scheduling request indicator (SRI) period
adaptation. If this parameter is set to QCIADAPTIVE(QCIADAPTIVE),
the SRI period adaptively changes based on the cell load and bearers
with different QCIs. If this parameter is set to
NO
NOQCIADAPTIVE(NOQCIADAPTIVE), the SRI period adaptively
changes based on only the cell load. If the parameter is set to
OFF(OFF), the SRI period is set to the value of the SriPeriod parameter
in the CellStandardQci MO.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the mobile country code (MCC) of the CDMA2000 1xRTT cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
The MCC consists of three digits. YES
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the CDMA2000 1xRTT cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
The MCC consists of three digits. YES
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the cell ID of the reference CDMA2000 1xRTT cell. The cell ID
and sector ID together uniquely identify a CDMA2000 cell in the mobile
switching center (MSC). In the CDMA2000 1xRTT network, a cell ID NO
uniquely identifies a cell within the mobile switching center (MSC). A cell
ID consists of 12 bits.

Indicates the sector ID of the reference CDMA2000 1xRTT cell. The cell
ID and sector ID together uniquely identify a CDMA2000 cell in the
NO
mobile switching center (MSC). A sector ID is unique in a CDMA2000 cell
and consists of four bits.

Indicates the system ID of the reference CDMA2000 1xRTT cell. A

system ID is allocated to each local CDMA mobile network and is used to
NO
determine whether a UE is in the roaming state. For details about this
parameter, see 3GPP2 C.S0005.

Indicates the network ID of the reference CDMA2000 1xRTT cell. A base

station is a cellular system and a member of the network. A network is a
subset of a system that is identified by a system ID. A network in a
system is identified by a network ID. A system ID and a network ID
together uniquely identify a network. System ID 0 and network ID 0
NO
indicate all base stations outside a specified network and are reserved
values. Network ID 65535 is also reserved; this ID indicates that the
roaming status of UEs is non-roaming in the whole system no matter
what the network ID is. For details, see the description of NID in 3GPP2
C.S0005.

Indicates the ID of the MSC to which the reference CDMA2000 1xRTT

cell belongs. The value begins with 0x followed by a maximum of 6
hexadecimal characters (0 to 9, and A to F), for example, 0x123A. The
hexadecimal character string cannot begin with 0, for example, the value
cannot be 0x0123A. An MSC ID uniquely identifies an MSC and is
determined by the operator. NO
MSCID is defined in TIA/EIA-41.5-D and consists of MarketID (2 bytes)
and SwitchNo (1 byte). MarketID is described in TIA/EIA TSB29 and can
be defined by the operator. It can be the SID or another ID that can
differentiate operators. SwitchNo consists of a group of cell addresses
and circuit resource IDs under MarketID.

Indicates whether to configure a band class for a UE. If this parameter is

set to CFG, the UE sends a location update request to the CDMA2000
1xRTT system when the UE finds that the current band class is different NO
from the band class pre-registered the last time. For details, see the
description of BAND_CLASSIncluded in 3GPP2 C.S0097.
Indicates the band class that a UE can pre-register at. If this parameter
is set to CFG, the UE sends a location update request to the CDMA2000
1xRTT system when the UE finds that the current band class is different NO
from the band class pre-registered the last time. For details, see the
description of BAND_CLASS in 3GPP2 C.S0097.

Indicates whether the CDMA2000 1xRTT CSFB registration parameters

need to be set. If this parameter is set to CFG, the CDMA2000 1xRTT
circuit-switched fallback (CSFB) registration parameters need to be set.
NO
If this parameter is set to NOT_CFG, the CDMA2000 1xRTT CSFB
registration parameters do not need to be set and the parameters are
not broadcast in SIB8.

Indicates whether multiple system IDs (SIDs) can be stored. That is,
whether UEs are allowed to store SID_NID_LIST that contains different NO
SIDs. For details about this parameter, see 3GPP TS 36.331.

Indicates whether multiple network IDs (NIDs) can be stored. That is,
whether UEs are allowed to store SID_NID_LIST that contains the same
NO
SID but different NIDs. For details about this parameter, see 3GPP TS
36.331.

Indicates whether a non-roaming UE is allowed to register at the current

system. If this parameter is set to BOOLEAN_TRUE and
MOB_TERM_HOME in the UE is set to BOOLEAN_TRUE, the UE can
automatically register at the current system. MOB_TERM_HOME
NO
indicates whether a UE can be called in the home PLMN. Automatic
registration can be power-on registration, power-off registration, periodic
registration, zone-based registration, or distance-based registration. For
details, see the description of homeReg in 3GPP TS 36.331.

Indicates whether a UE roaming from another system is allowed to

register at the current system. If this parameter is set to
BOOLEAN_TRUE and MOB_TERM_FOR_SID in the UE is set to 1, the NO
UE can automatically register at the current system. For details, see the
description of foreignSIDReg in 3GPP TS 36.331.
Indicates whether a UE roaming from another network is allowed to
register at the current network. If this parameter is set to
BOOLEAN_TRUE, the UE can automatically register at the current NO
network. For details, see the description of foreignNIDReg in 3GPP TS
36.331.

Indicates whether a UE can initiate automatic registration when some of

its parameters are changed or when it enters a new system. If this
parameter is set to BOOLEAN_TRUE, automatic registration is allowed.
NO
If this parameter is set to BOOLEAN_FALSE, automatic registration is
not allowed. For details, see the description of parameterReg in 3GPP
TS 36.331.

Indicates whether power-on registration is allowed, that is, whether a UE

can initiate automatic registration immediately after being powered on
and receiving a system message. If this parameter is set to
BOOLEAN_TRUE, the UE can initiate automatic registration. If this
parameter is set to BOOLEAN_FALSE, the UEs cannot initiate automatic NO
registration. To prevent frequent registration due to immediate power-off
after power-on, the UE can initiate registration 20 seconds after it enters
the idle mode. For details, see the description of powerUpReg in 3GPP
TS 36.331.

Indicates the CDMA2000 1xRTT registration period. If this parameter is

set to 0, the UE does not perform time-based registration. If this
parameter is set to a value in the range from 29 to 85, the period can be
NO
calculated using the following formula: [2^(Registration period/4)] ×
0.08s. For details, see the description of registrationPeriod in 3GPP TS
36.331.

Indicates the CDMA2000 1xRTT registration zone. This parameter, the

system ID, and the network ID together uniquely identify a CDMA2000
registration zone. This parameter is used for registration-zone-based
NO
registration. Registration zones are planned based on actual network
conditions. For details, see the description of registrationZone in 3GPP
TS 36.331.

Indicates the total number of CDMA2000 1xRTT registration zones to be

retained. If this parameter is set to 0, registration-zone-based registration
is disabled. If this parameter is set to a value greater than 1, UEs do not
NO
frequently switch between registration zones. However, this results in
delayed location updates. For details, see the description of totalZone in
3GPP TS 36.331.
Indicates the length of the CDMA 1xRTT registration zone timer. The UE
saves the registration zone code contained in an SPM message to a
registration zone list. If the UE does not receive any message from a
registration zone within the timer length, the UE deletes this registration
zone code. This timer takes effect only if the number of retained
registration zones is not 0. This parameter is used for registration-zone-
NO
based registration. The parameter values 0 to 7 indicate 1, 2, 5, 10, 20,
30, 45, and 60 minutes, respectively. To reduce the impact on paging
when the number of retained registration zones is greater than 1, you are
advised to set this timer to a small value, for example, 1. If the number of
retained registration zones is 1, this timer does not take much effect. For
details, see the description of zoneTimer in 3GPP TS 36.331.

Indicates whether a CDMA2000 1xRTT UE needs to initiate registration

during power-off. For details, see the description of powerDownReg-r9 in NO
3GPP TS 36.331.

Indicates whether access class barring for CDMA2000 1xRTT is

NO
configured.

Indicates the persistence value for common call access overload classes
0 to 9 and determines the threshold P for performing continuity checks
by UEs. A UE must pass the continuity check to access the network. For
details, see IS95A-C6. In each timeslot after the RS, the UE performs a
pseudorandom continuity check based on parameter P. During each
NO
timeslot, a random value RP ranging from 0 to 1 is generated. If RP is
less than P, the UE passes the check. Then, the UE sends the first probe
of the access sequence in the timeslot. If the check fails, the UE needs
to perform the check in the next timeslot. For details, see the description
of ac-Barring0to9-r9 in 3GPP TS 36.331.

Indicates the persistence value for access overload class 10. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring10-r9 in 3GPP TS 36.331.
Indicates the persistence value for access overload class 11. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring11-r9 in 3GPP TS 36.331.

Indicates the persistence value for access overload class 12. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring12-r9 in 3GPP TS 36.331.

Indicates the persistence value for access overload class 13. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring13-r9 in 3GPP TS 36.331.

Indicates the persistence value for access overload class 14. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring14-r9 in 3GPP TS 36.331.

Indicates the persistence value for access overload class 15. The
persistence values for emergency call access overload classes 10 to 15
NO
determine the threshold P for performing continuity checks by UEs. For
details, see the description of ac-Barring15-r9 in 3GPP TS 36.331.

Indicates the persistence amendment value sent in access attempt

messages. In the access attempt indicated by the message, the value of
NO
(P x 2 - MSG_PSIST) and RP will be compared. For details, see ac-
BarringMsg-r9 in 3GPP TS 36.331.
Indicates the autonomously registered persistence amendment value for
the access barring factor. For details, see ac-BarringReg-r9 in 3GPP TS NO
36.331.

Indicates the persistence value for emergency calls by UEs belonging to

access overload classes 0 to 9. If PSISTEMGINCL is set to 0, AcBarEmg
is invalid. If PSISTEMGINCL is set to 1, set AcBarEmg based on whether
UEs belonging to access overload classes 0 to 9 are allowed to send NO
emergency call requests on the access channel. If allowed, set
AcBarEmg to 0. If not allowed, set AcBarEmg to 7. For details, see ac-
BarringEmg-r9 in 3GPP TS 36.331.

Indicates whether to configure the latest CDMA2000 1xRTT protocol

revision supported by the eNodeB. For details about this parameter, see NO
3GPP2 C.S0097.

Indicates the latest CDMA2000 1xRTT protocol revision supported by the

eNodeB. If the latest protocol revision is required by some features,
NO
change the protocol revision as required. For details about this
parameter, see 3GPP2 C.S0097.

Indicates whether to configure the CDMA2000 1xRTT minimum protocol

NO
revision level. For details about this parameter, see 3GPP2 C.S0097.

Indicates the minimum protocol revision that UEs need to support to

access the system. For details about this parameter, see 3GPP2 NO
C.S0097.

Indicates whether to include authentication. For details about this

NO
parameter, see 3GPP2 C.S0097.
Indicates whether to perform authentication. For details about this
NO
parameter, see 3GPP2 C.S0097.

Indicates whether to configure the maximum number of alternative

NO
service options. For details about this parameter, see 3GPP2 C.S0097.

Indicates the maximum number of alternative service options that can be

included in the Origination Message (ORM) and Page Response
Message (PRM). This parameter is valid for UEs with MOB_P_REV NO
greater than or equal to 6. For details about this parameter, see 3GPP2
C.S0097.

Indicates whether to configure the preferred access channel MS ID type.

NO
For details about this parameter, see 3GPP2 C.S0097.

Indicates the preferred access channel MS ID type. For details about this
NO
parameter, see 3GPP2 C.S0097.

Indicates whether the mobile country code (MCC) is delivered. If this

parameter is set to CFG, the MCC is delivered at CDMA2000 1xRTT
NO
parameter registration. For details about this parameter, see 3GPP2
C.S0097.

Indicates whether the mobile network code (MNC) is delivered. If this

parameter is set to CFG, the MNC is delivered at CDMA2000 1xRTT
NO
parameter registration. For details about this parameter, see 3GPP2
C.S0097.

Indicates whether IMSI_Ts are supported. For details about this

NO
parameter, see 3GPP2 C.S0097.
Indicates whether 15-digit IMSI_T are supported. If
IMSI_T_SUPPORTED in ESPM is set to 1 and the IMSI_T is correctly
set in the UE, the UE reports IMSI_T. If IMSI_T_SUPPORTED is set to 1
NO
but the IMSI_T is not set in the UE, the UE may report an incorrect IMSI.
When you modify this parameter, ensure that the true IMSI is correctly
set for the UE. For details about this parameter, see 3GPP2 C.S0097.

Indicates whether power control parameters are carried by UEs from the
LTE network to the CDMA2000 1xRTT network. For details about this NO
parameter, see 3GPP2 C.S0097.

Indicates the initial setpoint for RC3 used for UE-performed forward FCH
outer-loop power control. For details about this parameter, see 3GPP2 NO
C.S0097.

Indicates the initial setpoint for RC4 used for UE-performed forward FCH
outer-loop power control. For details about this parameter, see 3GPP2 NO
C.S0097.

Indicates the initial setpoint for RC5 used for UE-performed forward FCH
outer-loop power control. For details about this parameter, see 3GPP2 NO
C.S0097.

Indicates the initial setpoint for RC11 used for UE-performed forward
channel outer-loop power control. For details about this parameter, see NO
3GPP2 C.S0097.
Indicates the initial setpoint for RC12 used for UE-performed forward
FCH outer-loop power control. For details about this parameter, see NO
3GPP2 C.S0097.

Indicates whether to configure the pilot PN sequence offset index

NO
increment. For details about this parameter, see 3GPP2 C.S0097.

Indicates the pilot pseudo noise (PN) sequence offset index increment.
The value of this parameter is a greatest common divisor for pilot PN
sequence offsets of all adjacent base stations. For a given pilot PN
NO
sequence offset index increment, the number of PNs available in the
system is 512 divided by the value of this parameter. For details about
this parameter, see 3GPP2 C.S0097.

Indicates whether the leap second is included in a pre-registration

message. When this parameter is set to CFG, the eNodeB automatically NO
calculates the leap second value based on the system time.

Indicates whether to configure the time zone. If this parameter is set to

CFG, the eNodeB uses the DST information configured by running the
NO
SET TZ command. For details, see the description of
LTM_OFF_Included in 3GPP2 C.S0097.

Indicates whether to configure the daylight saving time (DST)

information. If this parameter is set to CFG, the eNodeB uses the DST
NO
information configured by running the SET TZ command. For details, see
the description of DAYLT_Included in 3GPP2 C.S0097.

Indicates whether to configure the GCSNA L2 acknowledge timer. If a

timer length needs to be specified, set this parameter to CFG. For details NO
about this parameter, see 3GPP2 C.S0097.

Indicates the length of the GCSNA L2 timer for responding to the

GCSNA1xCircuitService message. It is recommended that this
parameter be set to a value less than or equal to the
NO
GcsnaSeqContextTimer parameter value. Otherwise, the UE does not
resend the GCSNA1xCircuitService message. For details, see the
description of GCSNAL2AckTimer in 3GPP2 C.S0097.
Indicates whether to configure the GCSNA sequence context timer. If a
timer length needs to be specified, set this parameter to CFG. For details NO
about this parameter, see 3GPP2 C.S0097.

Indicates the length of the timer for retransmitting the

GCSNA1xCircuitService message. After the timer expires, the message
will not be retransmitted. It is recommended that this parameter be set to
a value greater than the GcsnaL2AckTimer parameter value. Otherwise, NO
the UE does not resend the GCSNA1xCircuitService message. For
details, see the description of GCSNASequenceContextTimer in 3GPP2
C.S0097.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the value for SectorID104 of the neighboring CDMA2000 high

rate packet data (HRPD) cell. The value begins with 0x followed by a
maximum of 26 hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork.
Indicates the value for SectorID24 of the neighboring CDMA2000 high
rate packet data (HRPD) cell. The value begins with 0x followed by a
maximum of six hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork.

Indicates the band class on which the neighboring CDMA2000 high rate
packet data (HRPD) cell operates. For details about this parameter, see YES
3GPP TS 36.331.

Indicates the frequency on which the neighboring CDMA2000 high rate

packet data (HRPD) cell operates. For details about this parameter, see YES
3GPP TS 36.331.

Indicates whether to permit or prohibit handovers from the local cell to

NO
the neighboring cell.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.

Indicates whether ANR with neighboring CDMA2000 high rate packet

NO
data (HRPD) cells is enabled.
Indicates the name of the local cell. NO

Indicates the name of the neighboring CDMA2000 HRPD cell. NO

Indicates the control policy on ANR-related MOs, which can be defined
by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the mobile country code (MCC) of the CDMA2000 high rate
packet data (HRPD) pre-registration parameter.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the CDMA2000 high rate
packet data (HRPD) pre-registration parameter.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates whether a UE without valid pre-registration is allowed to initiate

high rate packet data (HRPD) pre-registration. If this parameter is set to
BOOLEAN_TRUE, the UE is allowed to initiate the pre-registration. If this
NO
parameter is set to BOOLEAN_FALSE, the UE is not allowed to initiate
the pre-registration. For details about this parameter, see 3GPP TS
36.331.

Indicates whether the measurement configuration pre-registration

NO
parameter is configured.
Indicates whether measurement configuration pre-registration is allowed. NO

Indicates the ID of the pre-registration CDMA2000 HRPD zone. This

parameter is used to control the re-registration of the UE and is valid
NO
only when pre-registration is allowed. For details about this parameter,
see 3GPP TS 36.331.

Indicates whether the secondary pre-registration zone ID 0 is configured.

If this parameter is set to CFG, the secondary pre-registration zone ID 0
exists. If this parameter is set to NOT_CFG, the secondary pre- NO
registration zone ID 0 does not exist. For details about this parameter,
see 3GPP TS 36.331.

Indicates the secondary pre-registration zone ID 0. This parameter is

used to control the re-registration of the UE. For details about this NO
parameter, see 3GPP TS 36.331.

Indicates whether the secondary pre-registration zone ID 1 is configured.

If this parameter is set to CFG, the secondary pre-registration zone ID 1
exists. If this parameter is set to NOT_CFG, the secondary pre- NO
registration zone ID 1 does not exist. For details about this parameter,
see 3GPP TS 36.331.
Indicates the secondary pre-registration zone ID 1. This parameter is
used to control the re-registration of the UE. For details about this NO
parameter, see 3GPP TS 36.331.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the mobile country code (MCC) of the reference CDMA2000

high rate packet data (HRPD) cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the reference CDMA2000

high rate packet data (HRPD) cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the value for SectorID104 of the reference CDMA2000 high
rate packet data (HRPD) cell. The value begins with 0x followed by a
maximum of 26 hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork. For details, see C.S0024.

Indicates the value for SectorID24 of the reference CDMA2000 high rate
packet data (HRPD) cell. The value begins with 0x followed by a
maximum of six hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork. For details, see C.S0024.
Indicates the selection ratio of the reference CDMA2000 high rate packet
data (HRPD) cell that a UE in the E-UTRAN cell can pre-register at. An
E-UTRAN cell may overlap multiple CDMA2000 HRPD cells, for
example, when three E-UTRAN sectors and six CDMA2000 HRPD
sectors cover the same area. Therefore, multiple CDMA2000 HRPD
sector IDs can be specified for an E-UTRAN cell, with each CDMA2000 NO
HRPD sector ID configured with a selection ratio. During UE pre-
registration, CDMA2000 HRPD sector IDs are selected based on
historical selection ratios. Considering the cellular network structure, a
maximum of six CDMA2000 HRPD sector IDs can be configured for a
UE in the E-UTRAN cell.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the neighboring CDMA2000 band class. Signals on a

frequency within the band class can be obtained by UEs. For details, see YES
the BandclassCDMA2000 IE defined in 3GPP 36.331 6.3.4.

Indicates the neighboring CDMA2000 frequency of the serving cell. For

details, see the IE CDMA2000-CarrierInfo in the 3GPP 36.331 6.3.4 YES
protocol.
Indicates the frequency-specific offset of the local cell to the neighboring
CDMA2000 cell on the frequency. A larger value of this parameter leads
to a higher probability of triggering measurement reports. For details, see NO
the Q-OffsetRangeInterRAT IE defined in section 6.3.4 in 3GPP TS
36.331.

Indicates whether to set the size of the CDMA2000 search window. If this
NO
parameter is set to NOT_CFG, the default size (8) is used.

Indicates the search window size to be used by the UE for searching for
the pilots of the neighboring CDMA2000 cells. For details, see the NO
MeasObjectCDMA2000 IE defined in 3GPP TS 36.331.
Indicates the priority or scaling factor of the CDMA2000 frequency.? If
the eNodeB selects target frequencies based on frequency priorities in
handovers to CDMA2000, this parameter indicates the priority of the
CDMA2000 frequency, whose value has a positive correlation with the
probability of the neighboring CDMA2000 frequency being selected as
NO
the target frequency. If the eNodeB selects target frequencies based on
scaling factors in handovers to CDMA2000, this parameter indicates the
scaling factor of the CDMA2000 frequency, whose value has a positive
correlation with the probability of the neighboring CDMA2000 frequency
being selected as the target frequency.

Indicates the ID of the static cluster in a Cloud BB scenario. YES

Indicates the ID of the static cluster in Cloud BB scenarios. YES

Indicates the mobile country code (MCC) of the cluster cell. A public land
mobile network (PLMN) ID is comprised of an MCC and a mobile
network code (MNC). The MCC consists of three digits. The MNC YES
consists of two to three digits. For example, if the MCC is 123 and the
MNC is 45, the PLMN ID is 12345.

Indicates the mobile network code (MNC) of the cluster cell. A public land
mobile network (PLMN) ID is comprised of a mobile country code (MCC)
and an MNC. The MCC consists of three digits. The MNC consists of two YES
to three digits. For example, if the MCC is 123 and the MNC is 45, the
PLMN ID is 12345.

Indicates the eNodeB identity of the cluster cell. It uniquely identifies an

eNodeB within a PLMN. The 28-bit E-UTRAN cell identity is comprised of
the cell identity and the eNodeB identity (represented by the most
YES
significant 20 bits). The cell global identity (CGI) of an E-UTRAN cell is
comprised of the E-UTRAN cell identity and the PLMN ID. For details
about this parameter, see 3GPP TS 36.413.
Indicates the identity of the local cell. It uniquely identifies a cell within an
eNodeB. The 28-bit E-UTRAN cell identity is comprised of the cell
identity (represented by the least significant eight bits) and the eNodeB
YES
identity. The cell global identity (CGI) of an E-UTRAN cell is comprised of
the E-UTRAN cell identity and the PLMN ID. For details about this
parameter, see 3GPP TS 36.413.

Indicates information about a cell in a cluster. NO

Indicates the mobile country code (MCC) of the local CSPC cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.This parameter applies only to LTE FDD cells.
Indicates the mobile network code (MNC) of the local CSPC cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.This parameter applies only to LTE FDD cells.

Indicates the eNodeB identity of the local CSPC cell. It uniquely identifies
an eNodeB within a PLMN. The 28-bit E-UTRAN cell identity is
comprised of the cell identity and the eNodeB identity (represented by
the most significant 20 bits). The cell global identity (CGI) of an E- YES
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details about this parameter, see 3GPP TS 36.413.This parameter
applies only to LTE FDD cells.
Indicates the cell identity of the local CSPC cell. It uniquely identifies a
cell within an eNodeB. The 28-bit E-UTRAN cell identity is comprised of
the cell identity (represented by the least significant eight bits) and the
eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is YES
comprised of the E-UTRAN cell identity and the PLMN ID. For details
about this parameter, see 3GPP TS 36.413.This parameter applies only
to LTE FDD cells.

Indicates the mobile country code (MCC) of the neighboring cell

performing sounding reference signal (SRS) measurements on UEs in
the local CSPC cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC). YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.This parameter applies only to LTE FDD cells.
Indicates the mobile network code (MNC) of the neighboring cell
performing sounding reference signal (SRS) measurements on UEs in
the local CSPC cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC. YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.This parameter applies only to LTE FDD cells.

Indicates the eNodeB identity of the neighboring cell performing

sounding reference signal (SRS) measurements on UEs in the local
CSPC cell. It uniquely identifies an eNodeB within a PLMN. The 28-bit E-
UTRAN cell identity is comprised of the cell identity and the eNodeB
YES
identity (represented by the most significant 20 bits). The cell global
identity (CGI) of an E-UTRAN cell is comprised of the E-UTRAN cell
identity and the PLMN ID. For details about this parameter, see 3GPP
TS 36.413.This parameter applies only to LTE FDD cells.

Indicates the identity of the neighboring cell performing sounding

reference signal (SRS) measurements on UEs in the local CSPC cell
under the same eNodeB. It uniquely identifies a cell within an eNodeB.
The 28-bit E-UTRAN cell identity is comprised of the cell identity
YES
(represented by the least significant eight bits) and the eNodeB identity.
The cell global identity (CGI) of an E-UTRAN cell is comprised of the E-
UTRAN cell identity and the PLMN ID. For details about this parameter,
see 3GPP TS 36.413.This parameter applies only to LTE FDD cells.
Indicates the ID of the static CSPC cluster in a Cloud BB scenario. YES

Indicates the ID of the static CSPC cluster in Cloud BB scenarios. YES

Indicates the mobile country code (MCC) of the CSPC cluster cell. A
public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC). The MCC consists of three digits. The MNC YES
consists of two to three digits. For example, if the MCC is 123 and the
MNC is 45, the PLMN ID is 12345.

Indicates the mobile network code (MNC) of the CSPC cluster cell. A
public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC. The MCC consists of three digits. The MNC YES
consists of two to three digits. For example, if the MCC is 123 and the
MNC is 45, the PLMN ID is 12345.

Indicates the eNodeB identity of the CSPC cluster cell. It uniquely

identifies an eNodeB within a PLMN. The 28-bit E-UTRAN cell identity is
comprised of the cell identity and the eNodeB identity (represented by
YES
the most significant 20 bits). The cell global identity (CGI) of an E-
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details about this parameter, see 3GPP TS 36.413.

Indicates the identity of the local CSPC cell. It uniquely identifies a cell
within an eNodeB. The 28-bit E-UTRAN cell identity is comprised of the
cell identity (represented by the least significant eight bits) and the
YES
eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is
comprised of the E-UTRAN cell identity and the PLMN ID. For details
about this parameter, see 3GPP TS 36.413.
Indicates the mobile country code of the external cell.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code of the external cell.

A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the eNodeB identity of the external E-UTRAN cell. It uniquely

identifies an eNodeB within a PLMN. The 28-bit E-UTRAN cell identity is
comprised of the cell identity and the eNodeB identity (represented by
YES
the most significant 20 bits). The cell global identity (CGI) of an E-
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details, see 3GPP TS 36.413.

Indicates the cell identity of the external E-UTRAN cell. It uniquely

identifies a cell within an eNodeB. The 28-bit E-UTRAN cell identity is
comprised of the cell identity (represented by the least significant eight
YES
bits) and the eNodeB identity. The cell global identity (CGI) of an E-
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details, see 3GPP TS 36.413.

Indicates the mobile country code of the external E-UTRAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.
Indicates the mobile network code of the external E-UTRAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the identity of the external GERAN cell. It uniquely identifies a

YES
GERAN cell within a PLMN.

Indicates the LAC of the external GERAN cell. YES

Indicates the mobile country code of the external cell.

A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code of the external cell.

A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.
Indicates the mobile country code of the external GERAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code of the external GERAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile country code of the external UTRAN cell.

A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code of the external UTRAN cell.

A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits.
YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the RNC ID of the external UTRAN cell. The 28-bit UTRAN cell
ID comprises the RNC cell ID and the RNC ID that are represented by
the least significant 16 bits and the most significant 12 bits, respectively. YES
The formula for calculating the UTRAN cell ID is as follows: UTRAN cell
ID = RNC ID x 65536 + RNC cell ID. For details, see 3GPP TS 25.401.
Indicates the RNC cell ID of an external UTRAN cell. It uniquely
identifies a cell within an RNC. The 28-bit UTRAN cell ID is comprised of
the RNC cell ID and the RNC ID that are represented by the least
YES
significant 16 bits and the most significant 12 bits, respectively. The
formula for calculating the UTRAN cell ID is as follows: UTRAN cell ID =
RNC ID x 65536 + RNC cell ID. For details, see 3GPP TS 25.401.

Indicates the mobile country code of the external UTRAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code of the external UTRAN cell that is
shared among multiple operators.
A PLMN ID is comprised of an MCC and an MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the value for SectorID104 of the external CDMA2000 high rate
packet data (HRPD) cell. The value begins with 0x followed by a
maximum of 26 hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork.
Indicates the value for SectorID24 of the external CDMA2000 high rate
packet data (HRPD) cell. The value begins with 0x followed by a
maximum of six hexadecimal characters (0 to 9, and A to F), for example,
0x123A. The hexadecimal character string cannot begin with 0, for
example, the value cannot be 0x0123A. SECTORID128 uniquely YES
identifies an EV-DO sector in the global scope and is comprised of
SECTORID104 and SECTORID24. SECTORID104 uniquely identifies a
subnetwork in the global scope and SECTORID24 uniquely identifies an
EV-DO sector in the subnetwork.

Indicates the band class on which the external CDMA2000 high rate
packet data (HRPD) cell operates. For details about this parameter, see YES
3GPP TS 36.331.

Indicates the frequency on which the external CDMA2000 high rate

packet data (HRPD) cell operates. For details about this parameter, see YES
3GPP TS 36.331.

Indicates the mobile country code (MCC) of the external CDMA2000

high rate packet data (HRPD) cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
NO
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the external CDMA2000

high rate packet data (HRPD) cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
NO
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the pseudo noise (PN) sequence number of the external
CDMA2000 high rate packet data (HRPD) cell. This number is used as NO
the physical cell ID of the cell. For details, see C.S0005 PILOT_PN.

Indicates the name of the external CDMA2000 HRPD cell. NO

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the cell ID of the external CDMA2000 1xRTT cell. The cell ID
and sector ID together uniquely identify a CDMA2000 cell in the mobile
switching center (MSC). In the CDMA2000 1xRTT network, a cell ID YES
uniquely identifies a cell within the mobile switching center (MSC). A cell
ID consists of 12 bits.
Indicates the sector ID of the external CDMA2000 1xRTT cell. The cell
ID and sector ID together uniquely identify a CDMA2000 cell in the
YES
mobile switching center (MSC). A sector ID is unique in a CDMA2000
cell and consists of four bits.
Indicates the band class on which the external CDMA2000 1x radio
transmission technology (1xRTT) cell operates. For details about this YES
parameter, see 3GPP TS 36.331.

Indicates the frequency on which the external CDMA2000 1xRTT cell

YES
operates. For details about this parameter, see 3GPP TS 36.331.

Indicates the system ID of the external CDMA2000 1xRTT cell. A system

ID is assigned to each local mobile network and is used to determine
YES
whether a UE is in the roaming state. For details about this parameter,
see 3GPP TS 36.331.

Indicates the ID of the network to which the external CDMA2000 1xRTT

cell belongs. A base station is a cellular system and a member of the
network. A network is a subset of a system that is identified by a system
ID. A network in a system is identified by a network ID. A system ID and a
network ID together uniquely identify a network. System ID 0 and
YES
network ID 0 indicate all base stations outside a specified network and
are reserved values. Network ID 65535 is also reserved; this ID indicates
that the roaming status of UEs is non-roaming in the whole system no
matter what the network ID is. For details, see the description of NID in
3GPP2 C.S0005.

Indicates the mobile country code (MCC) of the external CDMA2000

1xRTT cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
NO
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the external CDMA2000

1xRTT cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
NO
The MCC consists of three digits.
The MNC consists of two or three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the ID of the MSC to which the reference CDMA2000 1xRTT
cell belongs. The value begins with 0x followed by a maximum of 6
hexadecimal characters (0 to 9, and A to F), for example, 0x123A. The
hexadecimal character string cannot begin with 0, for example, the value
cannot be 0x0123A. An MSC ID uniquely identifies an MSC and is
determined by the operator. NO
MSCID is defined in TIA/EIA-41.5-D and consists of MarketID (2 bytes)
and SwitchNo (1 byte). MarketID is described in TIA/EIA TSB29 and can
be defined by the operator. It can be the SID or another ID that can
differentiate operators. SwitchNo consists of a group of cell addresses
and circuit resource IDs under MarketID.

Indicates the pseudo noise (PN) sequence number of the external

CDMA2000 1xRTT cell. This number is used as the physical cell ID of
NO
the cell. For details, see the description of PILOT_PN in 3GPP2
C.S0005.

Indicates the name of the external CDMA2000 1xRTT cell. NO

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the ID of the Local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the cell ID of the neighboring CDMA2000 1xRTT cell. The cell
ID and sector ID together uniquely identify a CDMA2000 cell in the entire
network. In the CDMA2000 1xRTT network, a cell ID uniquely identifies a YES
cell within the mobile switching center (MSC). A cell ID consists of 12
bits.
Indicates the sector ID of the neighboring CDMA2000 1xRTT cell. The
cell ID and sector ID together uniquely identify a CDMA2000 cell within
YES
the MSC. A sector ID is unique in a CDMA2000 cell and consists of 4
bits.

Indicates the band class on which the neighboring CDMA2000 1xRTT

YES
cell operates. For details about this parameter, see 3GPP TS 36.331.

Indicates the frequency on which the neighboring CDMA2000 1xRTT cell

YES
operates. For details about this parameter, see 3GPP TS 36.331.

Indicates the system ID of the neighboring CDMA2000 1xRTT cell. A

system ID is assigned to each local mobile network and is used to
YES
determine whether a UE is in the roaming state. For details about this
parameter, see 3GPP TS 36.331.

Indicates the network ID of the neighboring CDMA2000 1xRTT cell. For

YES
details about this parameter, see 3GPP TS 36.331.

Indicates whether to permit or prohibit handovers from the local cell to

NO
the neighboring cell.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.

Indicates whether ANR with CDMA2000 1xRTT cells is enabled. NO

Indicates the name of the local cell. NO

Indicates the name of the neighboring CDMA2000 1xRTT cell. NO

Indicates the control policy on ANR-related MOs, which can be defined
by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the neighboring CDMA2000 band class. Signals on a

frequency within the band class can be obtained by UEs. For details, see YES
the BandclassCDMA2000 IE defined in 3GPP 36.331.

Indicates whether to configure cell reselection priorities for CDMA2000

1xRTT band class. If this parameter is set to NOT_CFG, the cell NO
reselection priorities are not delivered in the system information.

Indicates the absolute priority of the CDMA2000 1xRTT band class to be

used during cell reselection. The value 0 indicates the lowest priority.
Frequencies used for different RATs must be assigned different cell NO
reselection priorities. The information is contained in SIB8. For details,
see 3GPP TS 36.331.
Indicates the RX signal level required for a cell on a frequency in the
higher-priority CDMA2000 1xRTT band class to become a candidate for
cell reselection. After measurements are started for cells on a frequency
in the band class, a cell on the frequency can become a candidate for NO
reselection only if the RX signal level of the cell is higher than the value
specified by this parameter for a time-to-trigger. For details, see 3GPP
TS 36.304 5.2.4.5.

Indicates the RX signal level required for a cell on a frequency in the

lower-priority CDMA2000 1xRTT band class to become a candidate for
cell reselection.
After measurements are started for cells on a frequency in the band
NO
class, a cell on the frequency can become a candidate for reselection
only if the RX signal level of the cell is better than the value specified by
this parameter for a time-to-trigger. For details, see 3GPP TS 36.304
5.2.4.5.

Indicates whether to configure cell reselection priorities for CDMA2000

HRPD band class. If this parameter is set to NOT_CFG, the cell NO
reselection priorities are not delivered in the system information.

Indicates the absolute priority of the CDMA2000 HRPD band class to be

used during cell reselection. The value 0 indicates the lowest priority.
Frequencies used for different RATs must be assigned different cell NO
reselection priorities. The information is contained in SIB8. For details,
see 3GPP TS 36.331.

Indicates the RX signal level required for a cell on a frequency in the

higher-priority CDMA2000 HRPD band class to become a candidate for
cell reselection. After measurements are started for cells on a frequency
in the band class, a cell on the frequency can become a candidate for NO
reselection only if the RX signal level of the cell is higher than the value
specified by this parameter for a time-to-trigger. For details, see 3GPP
TS 36.304 5.2.4.5.

Indicates the RX signal level required for a cell on a frequency in the

lower-priority CDMA2000 HRPD band class to become a candidate for
cell reselection.
After measurements are started for cells on a frequency in the band
NO
class, a cell on the frequency can become a candidate for reselection
only if the RX signal level of the cell is lower than the value specified by
this parameter for a time-to-trigger. For details, see 3GPP TS 36.304
5.2.4.5.
Indicates the mobile country code of the external cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the mobile network code of the external cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the cell ID of the external GERAN cell. It uniquely identifies a

GERAN cell within the area specified by the location area identity (LAI). YES
An LAI consists of the MCC, MNC, and LAC.

Indicates the LAC of the external GERAN cell. It uniquely identifies a

YES
location within a PLMN.

Indicates whether to set the routing area code (RAC) of the external
GERAN cell. This parameter is required if the external GERAN cell NO
supports packet switched (PS) services.

Indicates the routing area code. NO

Indicates the GERAN band indicator. If the GERAN ARFCN is a value in

the range of 512 to 810, the value of this parameter is used to indicate
whether the GERAN ARFCN is in the 1800 MHz band or the 1900 MHz
NO
band. If the GERAN ARFCN is not in either band, this parameter does
not take effect and can be set to either value. For details, see 3GPP TS
36.331.

Indicates the GERAN BCCH ARFCN. For details, see 3GPP TS 45.005. NO

Indicates the network color code (NCC) of GERAN. It is operator-specific

and identifies a network within the whole country.The base transceiver
NO
station identity code (BSIC) consists of the NCC and the base station
color code (BCC). For details, see 3GPP TS 23.003.
Indicates the base station color code (BCC) of an external GERAN cell.
This parameter is used to discriminate external GERAN cells working at
the same frequency.The base transceiver station identity code (BSIC) NO
consists of the BCC and the network color code (NCC). For details, see
3GPP TS 23.003.

Indicates whether the cell supports the dual transmission mode. If the
cell supports the dual transmission mode, both CS and PS services can
NO
be handed over to the cell at the same time. Otherwise, only the CS
service or the PS service can be handed over to the cell.

Indicates the name of the external GERAN cell. NO

Indicates whether the external GERAN cell supports single radio voice
call continuity (SRVCC) for concurrent CS and PS services. If this
NO
parameter is set to BOOLEAN_FALSE, the external GERAN cell does
not support SRVCC for concurrent CS and PS services.
Indicates whether an external GERAN cell supports ultra-flash CSFB to
GERAN. If this parameter is set to BOOLEAN_TRUE, the external
GERAN cell supports ultra-flash CSFB to GERAN. If this parameter is NO
set to BOOLEAN_FALSE, the external GERAN cell does not support
ultra-flash CSFB to GERAN.

Indicates whether the neighbor cell can be selected for handovers during
roaming. This parameter is set to NO(No) by default.
If this parameter is set to YES(Yes), this neighboring cell can be selected
for handovers during roaming. If this parameter is set to NO(No), this
neighboring cell cannot be selected for handovers during roaming.
If the PLMN of the neighboring cell is included in the SPID-based NO
handover-allowable HPLMN list or this parameter is set to YES(Yes), this
neighboring cell can be selected for handovers.
In the boundaries of roaming areas and non-roaming areas, you are
advised to set this parameter to YES(Yes) to ensure that neighboring
cells in roaming areas can be selected for handovers.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.
Indicates the cell ID of the Local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the mobile country code of the neighboring GERAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the mobile network code of the neighboring GERAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the LAC of the GERAN neighboring cell. It uniquely identifies a

YES
location within a PLMN.

Indicates the cell ID of the GERAN neighboring cell. It uniquely identifies

a GERAN cell within the area specified by the location area identity YES
(LAI). An LAI consists of the MCC, MNC, and LAC.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.

Indicates whether handovers of UEs to the neighboring cell are

NO
prohibited.

Indicates the priority of the neighboring cell during blind handovers. Blind
handover is a process in which the eNodeB instructs a UE to hand over
to a specified neighboring cell. There are 32 priorities altogether. The
NO
priority has a positive correlation with the value of this parameter. Note
that the value 0 indicates that blind handovers to the neighboring cell are
not allowed.
Indicates whether this neighboring cell is automatically discovered by the
NO
ANR algorithm.

Indicates the name of the local cell. NO

Indicates the name of the GERAN neighboring cell. NO

Indicates whether the neighboring GERAN cell overlaps the E-UTRAN
cell. The default value is NO.
The parameter value YES indicates that the neighboring GERAN cell NO
overlaps the E-UTRAN cell. The parameter value NO indicates that the
neighboring GERAN cell does not overlap the E-UTRAN cell.

Indicates the measurement priority of the neighboring GERAN cell. A

larger value indicates a higher priority. The measurement priorities can
be periodically and automatically arranged based on the number of times
that each neighboring GERAN cell is measured. The neighboring NO
GERAN cells for GERAN flash blind redirections or GERAN flash-CSFB-
based redirections can be selected based on the measurement priorities
of neighboring GERAN cells.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the eNodeB ID defined in the service protocol interface, which

uniquely identifies an eNodeB within a PLMN. For details, see 3GPP TS NO
36.300.

Indicates the start time of the latest RIM procedure towards the
NO
neighboring GERAN cell.

Indicates the time of the latest RIM request received by the neighboring
NO
GERAN cell.
Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates a GERAN carrier frequency group. In the cell reselection

procedure, the GERAN carrier frequencies are organized in groups and
YES
the cell reselection parameters are provided per group of GERAN carrier
frequencies.

Indicates the standard that is supported by the current carrier frequency

NO
group.

Indicates the first ARFCN in the GERAN carrier frequency group. If the
GERAN ARFCN is not between 512 and 810, one ARFCN can only in NO
one frequency band. For details, see 3GPP TS 45.005.

Indicates the GERAN band indicator. If the GERAN ARFCN is between

512 and 810, this parameter indicates whether the GERAN ARFCN is in
the 1800 MHz band or the 1900 MHz band. If the GERAN ARFCN is not
NO
in either band, this parameter does not take effect and can be set to
either value and one ARFCN can only in one frequency band. For
details, see 3GPP TS 45.005.
Indicates whether to set the reselection priority of the frequencies in the
GERAN carrier frequency group. For details about how UEs process
NO
frequency priorities during cell reselection, see section 5.2.4.1 of 3GPP
TS 36.304 (V12.4.0).

Indicates the cell reselection priority of the GERAN carrier frequency

group. The value 0 indicates the lowest priority. It is contained in system
information block type 7 (SIB7). The UE decides whether to reselect a
neighboring cell on a frequency in the GERAN carrier frequency group
based on the value of this parameter and the absolute priority of the
serving cell. If the value of this parameter is larger than the absolute
priority of the serving cell, the UE starts measurements on neighboring
cells on the frequencies in the GERAN carrier frequency group; then if
NO
the signal quality of some neighboring cells meets the related conditions,
the UE starts cell reselection. If the value of this parameter is smaller
than the absolute priority of the serving cell, the UE starts the
measurements only when the signal quality of the serving cell is poor;
then if the signal quality of some neighboring cells meets the related
conditions, the UE starts cell reselection. Frequencies used for different
RATs must be assigned different cell reselection priorities. For details,
see 3GPP TS 36.331.

Indicates whether to set the maximum power that the UE can apply to
transmission on a frequency in the GERAN carrier frequency group. If
NO
the value of this parameter is not specified, the maximum power is
subject to the UE capability.
Indicates the maximum power that the UE can apply to transmission on
a frequency in the GERAN carrier frequency group. It is used in cell
reselection criteria to calculate the compensated power. If the value of NO
this parameter is not specified, the maximum power is subject to the UE
capability. For details, see 3GPP TS 36.304.

Indicates the minimum RX level required for a neighboring cell on a

frequency in the GERAN carrier frequency group to become a candidate
for selection. It is included in criteria S and used in the evaluation for cell
selection. During the evaluation for cell reselection, the UE performs the
following calculation: Srxlev = Measured RSSI value of a neighboring cell NO
on a frequency in the GERAN carrier frequency group - Value of this
parameter - Compensated power. If Srxlev for a neighboring cell is better
than a threshold for a time-to-trigger, reselection to the cell is started. For
details, see 3GPP TS 36.104. (ActualBound = -115 + (2 * Bound))

Indicates the RX level required for a neighboring cell on a frequency in

the GERAN carrier frequency group to become a candidate for
reselection if the priority of the frequency is higher than that of the
serving frequency.
NO
After measurements are started for neighboring cells on a frequency in
the GERAN carrier frequency group, the UE reselects to a cell on the
frequency only if the RX level of the cell is better than the value specified
by this parameter for a time-to-trigger. For details, see 3GPP TS 36.104.

Indicates the RX level required for a neighboring cell on a frequency in

the GERAN carrier frequency group to become a candidate for
reselection if the priority of the frequency is lower than that of the serving
frequency.
After measurements are started for neighboring cells on a frequency in NO
the GERAN carrier frequency group, the UE reselects to a cell on the
frequency only if the RX level of the serving cell is lower than a specified
threshold and that of the cell is better than the value specified by this
parameter for a time-to-trigger. For details, see 3GPP TS 36.104.
Indicates the frequency offset of the group of neighboring GERAN carrier
frequencies. This parameter is used in the decision of the UE to send
NO
measurement reports for inter-RAT handovers. For details, see 3GPP TS
36.331.

Indicates whether a BCCH carrier with the specific NCC is permitted for
NO
monitoring. For details, see 3GPP TS 36.331.

Indicates the frequency group priority based on which the eNodeB

selects a target frequency group for blind redirection or delivers a
frequency group in measurement configuration messages. If a blind
redirection is triggered and the target neighboring cell is not specified,
the eNodeB selects a target frequency group based on the setting of this
NO
parameter. If a measurement configuration is to be delivered, the
eNodeB preferentially delivers the frequency group with the highest
priority. If this parameter is set to 0 for a frequency group, this frequency
group is not selected as the target frequency group for a blind
redirection. A larger value indicates a higher priority.

Indicates whether the coverage area of a GERAN frequency group is

continuous. The parameter value CONTINUOUS indicates that the
coverage area is continuous. The parameter value NON_CONTINUOUS
indicates that the coverage area is non-continuous. Only neighboring NO
GERAN cells working at the GERAN frequency group that has
continuous coverage are considered in the determination of candidate
cells for blind CSFB to GERAN.
Indicates whether a neighboring GERAN cell on the GERAN frequency
is a shared neighboring GERAN cell. If this parameter is set to
BOOLEAN_TRUE, the GERAN frequency is a shared frequency, and the
shared operator information must be checked on the OSS before all
NO
neighboring GERAN cells are added. If this parameter is set to
BOOLEAN_FALSE, the GERAN frequency is not a shared frequency,
and the shared operator information does not need to be checked on the
OSS before all neighboring GERAN cells are added.

Indicates whether information about external cells and neighbor

relationships with these cells on frequencies in the neighboring GERAN
frequency group can be maintained by ANR. If this parameter is set to NO
ALLOWED, the information can be maintained by ANR. If this parameter
is set to NOT_ALLOWED, the information cannot be maintained by ANR.
Indicates the priority of a GERAN frequency for neighbor relationship
removal when the number of inter-RAT neighbor relationships with
GERAN reaches its maximum and the neighobr relationships with some
GERAN cells on several frequencies can be removed. A smaller
parameter value indicates a lower frequency priority and a higher
probability of neighbor relationships with neighboring GERAN cells
operating on the frequency being removed.
If all values of this parameter for all GERAN frequencies are 0, the
eNodeB does not remove neighboring relationships based on GERAN
frequency priorities and removes the candidate neighbor relationship
with the cell to which the number of UEs handed over from the local cell
is the smallest.
Consider that all values of this parameter for all GERAN frequencies are
the same non-zero value. If the frequency serving the cell whose
NO
neighbor relationship is to be added has neighboring cells whose
neighbor relationships can be removed, the eNodeB removes the
neighbor relationship with the cell that operates on this frequency and to
which the number of UEs handed over from the local cell is the smallest.
If the frequency does not have neighboring cells whose neighbor
relationships can be removed, the eNodeB does not remove neighboring
relationships based on GERAN frequency priorities and removes the
candidate neighbor relationship with the cell to which the number of UEs
handed over from the local cell is the smallest.
If not all values of this parameter for all GERAN frequencies are the
same, the eNodeB removes the candidate GERAN neighbor relationship
with the cell that operates on a frequency and to which the number of
UEs handed over from the local cell is the smallest based on frequency
priories in ascending order.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the index of the BCCH carrier frequency group. It identifies a

YES
BCCH carrier frequency group.

Specifies the ARFCN of the GERAN BCCH. If the GERAN ARFCN value
is not between 512 and 810, one ARFCN can only in one frequency YES
band. For details about this parameter, see 3GPP TS 45.005.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the starting physical cell ID of the intra-frequency blacklisted
YES
cell. For details, see 3GPP TS 36.331.

Indicates the name of the intra-frequency blacklisted cell. NO

Indicates the physical cell ID range of the intra-frequency blacklisted cell.

NO
For details, see 3GPP TS 36.331.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the mobile country code of the E-UTRAN neighboring cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the mobile network code of the E-UTRAN neighboring cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the eNodeB identity of the intra-frequency neighboring cell. It
uniquely identifies an eNodeB within a PLMN. The 28-bit E-UTRAN cell
identity is comprised of the cell identity and the eNodeB identity
YES
(represented by the most significant 20 bits). The cell global identity
(CGI) of an E-UTRAN cell is comprised of the E-UTRAN cell identity and
the PLMN ID. For details, see 3GPP TS 36.413.

Indicates the local identity of the intra-frequency neighboring cell. It

uniquely identifies a cell within an eNodeB. The 28-bit E-UTRAN cell
identity is comprised of the cell identity (represented by the least
YES
significant eight bits) and the eNodeB identity. The cell global identity
(CGI) of an E-UTRAN cell is comprised of the E-UTRAN cell identity and
the PLMN ID. For details, see 3GPP TS 36.413.
Indicates the cell individual offset for the intra-frequency neighboring cell,
which is used in evaluation for handovers. It affects the probability of
triggering intra-frequency measurement reports. A larger value of this NO
parameter indicates a higher probability. For details, see 3GPP TS
36.331.
Indicates the offset for the intra-frequency neighboring cell, which is used
in evaluation for cell reselections. A larger value of this parameter results
in a lower probability of cell reselections. If this parameter is not set to
dB0, it is delivered in SIB4. For details, see 3GPP TS 36.331. If this NO
parameter is set to dB0, it is not delivered in SIB4. In this situation, UEs
use 0 dB as the offset for cell reselections. For details, see 3GPP TS
36.304.

Indicates whether handovers of UEs to the neighboring cell are

NO
prohibited.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.

Indicates whether this neighboring cell is automatically discovered by the

NO
ANR algorithm.
Indicates the name of the local cell. NO

Indicates the name of the intra-frequency neighboring E-UTRAN cell. NO

Indicates the priority of measurement on the intra-frequency neighboring
cell. The eNodeB preferentially contains the information about a
NO
neighboring cell with this priority set to HIGH_PRIORITY while delivering
a measurement configuration.
Indicates the maximum cell coverage offset. This parameter is specified
to achieve coverage expansion of micro base stations. The offset that
actually takes effect depends on UE capabilities.The parameter value is
added to or subtracted from the handover parameter cell individual offset
(CIO) to obtain a new CIO, which must meet protocol-defined
NO
constraints. The updated CIO is delivered to UEs so that handovers from
an eNodeB to a micro base station can be triggered more easily or
handovers from a micro base station to an eNodeB can be triggered less
easily. In this manner, the cell coverage of a micro base station is
expanded.

Indicates the neighboring cell classification label. The parameter values

FORMAL and EXTENDED represent different neighboring cell
management policies. If the number of handovers to a neighboring cell
NO
reaches a predefined threshold, the parameter is set to FORMAL for this
neighboring cell; otherwise, the parameter is set to EXTENDED for this
neighboring cell.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.
Indicates the physical ID of the neighboring E-UTRAN cell. For details
NO
about this parameter, see 3GPP TS 36.331.

Indicates the downlink (DL) E-UTRA absolute radio frequency channel

number (EARFCN) of the neighboring E-UTRAN cell. For details about NO
this parameter, see 3GPP TS 36.104.
Indicates whether to enable homing relationships between macro cells
and micro cells. In HetNet networking, the macro cell and micro cell that
greatly interfere each other are added to one cluster, and homing
relationships are configured between the macro cell and micro cells in
each cluster. A cluster consists of one macro cell and a maximum of
eight homing micro cells.
NO
If this parameter is set to ON(On), a neighboring cell is a homing cell of
the local cell.
If this parameter is set to OFF(Off), the neighboring cell is not a homing
cell of the local cell.
The homing relationship between a macro cell and a micro cell takes
effect only when the parameter settings are the same in the two cells.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the DL EARFCN of the neighboring cell on the neighboring E-

YES
UTRAN frequency. For details, see the 3GPP TS 36.104.
Indicates whether to configure the uplink E-UTRA absolute radio
frequency channel number (EARFCN) for the inter-frequency NO
neighboring cell.

Indicates the uplink E-UTRA absolute radio frequency channel number

(EARFCN) of the inter-frequency neighboring cell. If the value of this
parameter is not specified, the default uplink EARFCN is used, which is NO
calculated based on the downlink EARFCN. For details about this
parameter, see 3GPP TS 36.104.

Indicates whether to set the reselection priority of the neighboring E-

UTRAN frequency. For details about how UEs process frequency
NO
priorities during cell reselection, see section 5.2.4.1 of 3GPP TS 36.304
(V12.4.0).

Indicates the cell reselection priority of the neighboring E-UTRAN

frequency. The value 0 indicates the lowest priority. It is contained in
system information block type 5 (SIB5). The UE decides whether to
reselect a neighboring cell on the frequency based on the value of this
parameter and the absolute priority of the serving cell. If the value of this
parameter is larger than the absolute priority of the serving cell, the UE
starts measurements on neighboring cells on the frequency; then if the
signal quality of some neighboring cells meets the related conditions, the NO
UE starts cell reselection. If the value of this parameter is less than or
equal to the absolute priority of the serving cell, the UE starts the
measurements only when the signal quality of the serving cell is poor;
then if the signal quality of some neighboring cells meets the related
conditions, the UE starts cell reselection. Frequencies used for different
RATs must be assigned different cell reselection priorities. For details,
see 3GPP TS 36.331.
Indicates the evaluation duration for a UE to determine whether to
reselect the inter-frequency neighboring cell to camp on. If the signal
quality in an inter-frequency neighboring cell is better than that in the
serving cell for the period specified by this parameter and a UE camps NO
on the serving cell for more than 1s, the UE attempts to reselect the
inter-frequency neighboring cell to camp on. This parameter is contained
in SIB5. For details, see 3GPP TS 36.331.

Indicates whether to set the speed-dependent scaling parameters

related to cell reselection.
NO
If this parameter is set to NOT_CFG, speed-dependent cell reselections
are not supported by default.

Indicates the scaling factor applied to the cell reselection duration for
medium-mobility UEs. This parameter is delivered in SIB5. For details, NO
see 3GPP TS 36.331.
Indicates the scaling factor applied to the cell reselection duration for
high-mobility UEs. This parameter is delivered in SIB5. For details, see NO
3GPP TS 36.331.

Indicates the measurement bandwidth of the inter-frequency neighboring

cell on the frequency. The setting of this parameter depends on the
bandwidth configuration of the cell. In E-UTRAN, a cell bandwidth is also
NO
expressed in units of resource blocks (RBs). Cell bandwidths 1.4 MHz, 3
MHz, 5 MHz, 10 MHz, 15 MHz, and 20 MHz correspond to 6 RBs, 15
RBs, 25 RBs, 50 RBs, 75 RBs, and 100 RBs, respectively.
Indicates the frequency-specific offset for the neighboring E-UTRAN
frequency that applies to UEs in idle mode. It is contained in system
NO
information block type 5 (SIB5) and delivered to UEs in idle mode for cell
reselection. For details, see 3GPP TS 36.331.

Indicates the RX level required for a neighboring cell on the frequency to

become a candidate for reselection if the priority of the frequency is
higher than that of the serving frequency. After measurements are
started for neighboring cells on the frequency, the UE reselects to a NO
neighboring cell on the frequency only if the RX level of the cell is better
than the value specified by this parameter for a time-to-trigger. For
details, see 3GPP TS 36.331.
Indicates the minimum RX level required for a neighboring cell on the
frequency to become a candidate for reselection if the priority of the
frequency is lower than that of the serving frequency. After
measurements are started for neighboring cells on the frequency, the UE
NO
reselects to a neighboring cell on the frequency only if the RX level of the
serving cell is lower than a specified threshold and that of the cell is
higher than the value specified by this parameter for a time-to-trigger.
For details, see 3GPP TS 36.331.

Indicates the RX level required for a neighboring cell on the frequency to

become a suitable cell for selection. It is included in criteria S and used
in the evaluation for cell selection. During the evaluation for cell
reselection, the UE performs the following calculation: Srxlev =
NO
Measured RSRP value of a neighboring cell on the frequency - Value of
this parameter - Compensated power. If Srxlev for a cell is better than a
threshold for a time-to-trigger, reselection to the cell is started. For
details, see 3GPP TS 36.304.

Indicates whether to set the maximum power that the UE can apply to
transmission on the neighboring E-UTRAN frequency. If the value of this
NO
parameter is not specified, the maximum power is subject to the UE
capability.

Indicates the maximum power that the UE can apply to transmission on

the neighboring E-UTRAN frequency. It is used in cell reselection criteria
to calculate the compensated power. If the value of this parameter is not NO
specified, the maximum power is subject to the UE capability. For details,
see 3GPP TS 36.304.
Indicates the inter-frequency neighboring cell configuration of the local
cell.
The value BitString00 indicates that some inter-frequency neighboring
cells have the same MBSFN subframe configuration as the local cell.
The value BitString01 indicates that none of the inter-frequency
neighboring cells is configured with MBSFN subframes.
The value BitString10 indicates that the MBSFN subframe configurations NO
of all neighboring cells are the same as or subsets of that of the local
cell.
The value BitString11 indicates that some inter-frequency neighboring
cells have different UL-DL subframe configurations from the local TDD
cell.
For details, see 3GPP TS 36.331.

Indicates whether all inter-frequency neighboring cells on this frequency

are configured with at least two antenna ports.
Set this parameter to BOOLEAN_TRUE if all inter-frequency neighboring
cells on this frequency are configured with at least two antenna ports. NO
Set this parameter to BOOLEAN_FALSE if one inter-frequency
neighboring cell on this frequency is configured with only one antenna
port.

Indicates the event to trigger coverage-based inter-frequency handovers.

This parameter can be set to EventA3, EventA4, or EventA5. If the
neighboring E-UTRAN frequency and the serving frequency are in the
same frequency band, event A3 is recommended as it provides better NO
handover performance in this situation. If the neighboring E-UTRAN
frequency and the serving frequency are in different frequency bands,
event A4 or A5 is used.

Indicates the RSRQ-based minimum RX level required for a neighboring

cell on the frequency to become a candidate for reselection if the RSRQ-
based priority of the frequency is higher than that of the serving
frequency.
After measurements are started for neighboring cells on the neighboring NO
E-UTRAN frequency, the UE reselects to a neighboring cell on the
frequency only if the RSRQ-based RX level of the cell is higher than the
value specified by this parameter for a time-to-trigger. For details, see
3GPP TS 36.331.
Indicates the RSRQ-based minimum RX level required for a neighboring
cell on the frequency to become a candidate for reselection if the RSRQ-
based priority of the frequency is lower than that of the serving
frequency.
After measurements are started for neighboring cells on a frequency in
NO
the GERAN carrier frequency group, the UE reselects to a neighboring
cell on the frequency only if the RSRQ-based RX level of the serving cell
is lower than a specified threshold and that of the cell is higher than the
value specified by this parameter for a time-to-trigger. For details, see
3GPP TS 36.331.

Indicates whether to set the minimum required RX level. NO

Indicates the minimum RX level of an inter-frequency neighboring cell,

which is required for it to become a candidate for cell reselection. It
determines the probability of triggering cell reselection to inter-frequency NO
neighboring cells on the frequency. The value of this parameter is
contained in SIB5. For details, see 3GPP TS 36.331.

Indicates the frequency priority based on which the eNodeB selects a

target frequency for blind redirection or contains a frequency in a
measurement configuration. If a blind redirection is triggered and the
target neighboring cell is not specified, the eNodeB selects a target
frequency based on this priority. If a measurement configuration is to be NO
delivered, the eNodeB preferentially delivers a frequency with the
highest priority. If this priority is set to 0 for a frequency, this frequency is
not selected as the target frequency for a blind redirection. A larger value
indicates a higher priority.
Indicates whether the neighboring frequency of the serving frequency
can be a target frequency in load balancing. If this parameter is set to
ALLOWED, the neighboring frequency of the serving frequency can be
NO
selected as a target frequency in load balancing. If this parameter is set
to NOT_ALLOWED, the neighboring frequency of the serving frequency
cannot be selected as a target frequency in load balancing.

Indicates whether to enable or disable measurement for frequency-

priority-based inter-frequency handovers to neighboring frequencies. In
frequency-priority-based handovers, if the eNodeB delivers frequencies
to be measured based on frequency configuration, the frequencies with NO
the FreqPriBasedHoMeasFlag parameter set to ENABLE can be
measured, and the frequencies with the FreqPriBasedHoMeasFlag
parameter set to DISABLE cannot be measured.
Indicates the preset proportion of UEs in idle mode in a frequency. This
parameter takes effect when the InterFreqIdleMlbSwitch option of the
MlbAlgoSwitch parameter in the CellAlgoSwitch MO and the Proportion
option of the InterFreqIdleMlbMode parameter in the CellMlb MO are
selected. The eNodeB transfers normally released UEs to frequencies
based on the preset proportions among frequencies, so that load
balancing for UEs in idle mode is achieved. The sum of proportions for
load balancing among all frequencies cannot exceed 100%. Proportion
for load balancing at the serving frequency = 100% – (proportion at
NO
frequency 1 + proportion at frequency 2 + … + proportion at frequency
n).
If the INTER_FREQ_IDLE_MLB_SWITCH option of the MlbAlgoSwitch
parameter in the ENodeBAlgoSwitch MO and the
ADAPTIVE_PROPORTION option of the InterFreqIdleMlbMode
parameter in the eNodeBMlb MO are selected, the eNodeB adaptively
adjusts the proportions of UEs in idle mode among frequencies based on
UE distribution in the network, ensuring that the proportions of UEs in
idle mode among frequencies approach to the preset proportions.

Indicates the priority of the neighboring E-UTRAN frequency for load

balancing. The value 0 indicates the lowest priority. The neighboring E-
NO
UTRAN frequency with the highest priority is selected as the target
frequency for inter-frequency load balancing.
Indicates the frequency-specific offset for the neighboring E-UTRAN
frequency that applies to UEs in connected mode. It is contained in the
event A3/A4/A5 measurement configuration and delivered to UEs in NO
connected mode. The offset affects the probability of reporting events
A3, A4, and A5. For details, see 3GPP TS 36.331.

Indicates the frequency measurement priority. A larger value indicates a

NO
higher priority.

Indicates the offset to the RSRP threshold for events A4 and A5 that
trigger coverage-based inter-frequency handovers. In coverage-based
handovers, the eNodeB delivers the RSRP threshold for event A4 or A5
to UEs, which is equal to the sum of the InterFreqHoA4ThdRsrp and
NO
IfHoThdRsrpOffset parameter values. If the RSRP threshold for event A4
or A5 is less than the minimum RSRP value, the minimum value is
delivered instead. If the RSRP threshold for event A4 or A5 is greater
than the maximum RSRP value, the maximum value is delivered instead.
Indicates the offset to the RSRP threshold for events A4 and A5 that
trigger load-based inter-frequency handovers. In load-based inter-
frequency handovers, the eNodeB delivers the RSRP threshold for event
A4 or A5 to UEs, which is equal to the sum of the
InterFreqLoadBasedHoA4ThdRsrp and IfMlbThdRsrpOffset parameter NO
values. If the RSRP threshold for event A4 or A5 is less than the
minimum RSRP value, the minimum value is delivered instead. If the
RSRP threshold for event A4 or A5 is greater than the maximum RSRP
value, the maximum value is delivered instead.

Indicates whether the EARFCN is specific to the primary frequency

band. Among the EARFCNs of the same frequency, if the
MasterBandFlag parameter is set to TRUE for one EARFCN and FALSE
for other EARFCNs, the former EARFCN is specific to the primary
frequency band while the latter EARFCNs are specific to secondary NO
frequency bands. In this case, only the EARFCN specific to the primary
frequency band is broadcast in system information block type 5 (SIB5). If
the MasterBandFlag parameter is set to FALSE for all EARFCNs of the
same frequency, only the smallest EARFCN is broadcast in SIB5.

Indicates whether an intra-RAT inter-frequency neighboring cell is a

shared neighboring cell. If this parameter is set to BOOLEAN_TRUE, the
neighboring E-UTRAN frequency is a shared frequency, and the shared
operator information must be checked on the OSS before all inter-
frequency neighboring cells are added. If this parameter is set to NO
BOOLEAN_FALSE, the neighboring E-UTRAN frequency is not a shared
frequency, and the shared operator information does not need to be
checked on the OSS before all inter-frequency neighboring cells are
added.
Indicates whether an inter-frequency cell is set to LOW_SPEED,
HIGH_SPEED, ULTRA_HIGH_SPEED, or EXTRA_HIGH_SPEED. This
NO
parameter indicates the handover direction when high- or low-speed
handover algorithm is enabled for high-speed railway UEs.

Indicates whether information about inter-frequency neighboring cells

and external cells configured on the frequency associated with the
serving cell can be maintained by ANR. If this parameter is set to NO
ALLOWED, the information can be maintained by ANR. If this parameter
is set to NOT_ALLOWED, the information cannot be maintained by ANR.
Indicates the frequency priority of providing VoIP services on the intra-
RAT neighboring frequency. A larger value of this parameter indicates a
higher priority. During coverage-based inter-frequency handovers with
VoipMeasFreqPriSwitch being on, the eNodeB selects and delivers the
NO
neighboring frequencies based on the frequency priorities when starting
measurements. The eNodeB preferentially delivers the frequency with
the highest priorities to VoIP UEs. If this parameter is set to 0, this
neighboring frequency is not prioritized.

Indicates the priority of an E-UTRAN frequency for neighbor relationship

removal when the number of intra-RAT neighbor relationships reaches its
maximum and the neighbor relationships with some E-UTRAN cells on
several frequencies can be removed. A smaller parameter value
indicates a lower frequency priority.
If all values of this parameter for all E-UTRAN frequencies are 0, the
eNodeB does not remove neighboring relationships based on E-UTRAN
frequency priorities and removes the candidate neighbor relationship
with the cell to which the number of UEs handed over from the local cell
is the smallest.
Consider that all values of this parameter for all E-UTRAN frequencies
are the same non-zero value. If the frequency serving the cell whose
neighbor relationship is to be added has neighboring cells whose
NO
neighbor relationships can be removed, the eNodeB removes the
neighbor relationship with the cell that operates on this frequency and to
which the number of UEs handed over from the local cell is the smallest.
If the frequency does not have neighboring cells whose neighbor
relationships can be removed, the eNodeB does not remove neighboring
relationships based on E-UTRAN frequency priorities and removes the
candidate neighbor relationship with the cell to which the number of UEs
handed over from the local cell is the smallest.
If not all values of this parameter for all E-UTRAN frequencies are the
same, the eNodeB removes the candidate neighbor relationship with the
cell that operates on a frequency and to which the number of UEs
handed over from the local cell is the smallest based on frequency
priories in ascending order.
Indicates whether a frequency can be selected as the target frequency
for inter-frequency MLB for low-efficiency UEs. When this parameter is
set to ALLOWED, this frequency can be selected as the target
NO
frequency. If this parameter is set to NOT_ALLOWED, this frequency
cannot be selected as the target frequency. This parameter applies only
to LTE TDD cells.

Indicates the event type used to trigger MLB-based inter-frequency

handovers. MLB-based inter-frequency handovers can be triggered
based on event A4 or event A5. If an inter-frequency neighboring cell
NO
and the serving cell are served by the same eNodeB, you are advised to
set this parameter to EventA4(EventA4); otherwise, you are advised to
set this parameter to EventA5(EventA5).
Indicates whether the neighboring E-UTRAN frequency can be used as a
target frequency for uplink traffic-based MLB. If this parameter is set to
ALLOWED, this frequency can be selected as the target frequency. If
NO
this parameter is set to NOT_ALLOWED, this frequency cannot be
selected as the target frequency. This parameter applies only to LTE
TDD networks.

Indicates the priority of the neighboring E-UTRAN frequency to be

selected as a target frequency for uplink traffic-based MLB. The value 0
indicates the lowest priority. The eNodeB selects a high-priority NO
frequency as the target frequency for uplink traffic-based MLB. This
parameter applies only to LTE TDD networks.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.
Indicates the DL EARFCN of the inter-frequency blacklisted cell. For
YES
details, see 3GPP TS 36.104.

Indicates the starting physical cell ID of the inter-frequency blacklisted

YES
cell. For details, see 3GPP TS 36.331.

Indicates the name of the inter-frequency blacklisted cell. NO

Indicates the physical cell ID range of the inter-frequency blacklisted cell.

NO
For details, see 3GPP TS 36.331.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the mobile country code of the E-UTRAN neighboring cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the mobile network code of the E-UTRAN neighboring cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the eNodeB identity of the inter-frequency neighboring cell. It
uniquely identifies an eNodeB within a PLMN. The 28-bit E-UTRAN cell
identity is comprised of the cell identity and the eNodeB identity
YES
(represented by the most significant 20 bits). The cell global identity
(CGI) of an E-UTRAN cell is comprised of the E-UTRAN cell identity and
the PLMN ID. For details, see 3GPP TS 36.413.
Indicates the local identity of the inter-frequency neighboring cell. It
uniquely identifies a cell within an eNodeB. The 28-bit E-UTRAN cell
identity is comprised of the cell identity (represented by the least
YES
significant eight bits) and the eNodeB identity. The cell global identity
(CGI) of an E-UTRAN cell is comprised of the E-UTRAN cell identity and
the PLMN ID. For details, see 3GPP TS 36.413.

Indicates the cell individual offset for the inter-frequency neighboring cell,
which is used in evaluation for handovers. It affects the probability of
triggering inter-frequency measurement reports. A larger value of this NO
parameter indicates a higher probability. For details, see 3GPP TS
36.331.
Indicates the offset for the inter-frequency neighboring cell, which is used
in evaluation for cell reselections. A larger value of this parameter results
in a lower probability of cell reselections. If this parameter is not set to
dB0, it is delivered in SIB5. For details, see 3GPP TS 36.331. If this NO
parameter is set to dB0, it is not delivered in SIB5. In this situation, UEs
use 0 dB as the offset for cell reselections. For details, see 3GPP TS
36.304.

Indicates whether handovers of UEs to the neighboring cell are

NO
prohibited.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.
Indicates the priority of the neighboring cell during handovers. The
parameter values are divided into three segments, indicating the blind-
handover priority, frequency-based-handover priority, and 0. Within the
same segment, a larger parameter value indicates a higher priority. Blind
handover is a process in which the eNodeB instructs a UE to hand over
to a specified neighboring cell without measurements. If this parameter NO
value is set to 0, blind handovers and frequency-based handovers
cannot be performed. The parameter values 1 to 16 indicate the blind-
handover priorities. The parameter values 17 to 32 indicate the
frequency-based-handover priorities for frequency-based blind
handovers and measurement-based handovers.

Indicates whether this neighboring cell is automatically discovered by the

NO
ANR algorithm.

Indicates the name of the local cell. NO

Indicates the name of the inter-frequency neighboring cell. NO
Indicates the priority of measurement on the inter-frequency neighboring
cell. The eNodeB preferentially contains the information about a
NO
neighboring cell with this priority set to HIGH_PRIORITY while delivering
a measurement configuration.

Indicates whether the inter-frequency neighboring cell is manually

identified as a neighboring cell overlapping the local E-UTRAN cell. The
default value is NO. The parameter value YES indicates that the inter-
frequency neighboring cell is manually identified as a neighboring cell NO
overlapping the local E-UTRAN cell. The parameter value NO indicates
that the inter-frequency neighboring cell is not manually identified as a
neighboring cell overlapping the local E-UTRAN cell.
Indicates the overlapping coverage area of a target neighboring cell that
is configured for the inter-frequency load balancing algorithm, which is
NO
used to decide location-based priority user policies. This parameter is set
only for TDD cells.
Indicates the neighboring cell classification label. The parameter values
FORMAL and EXTENDED represent different neighboring cell
management policies. If the number of handovers to a neighboring cell
NO
reaches a predefined threshold, the parameter is set to FORMAL for this
neighboring cell; otherwise, the parameter is set to EXTENDED for this
neighboring cell.
Indicates the control policy on ANR-related MOs, which can be defined
by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the physical ID of the neighboring E-UTRAN cell. For details

NO
about this parameter, see 3GPP TS 36.331.

Indicates the downlink (DL) E-UTRA absolute radio frequency channel

number (EARFCN) of the neighboring E-UTRAN cell. For details about NO
this parameter, see 3GPP TS 36.104.
Indicates the mobile country code of the external E-UTRAN cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the mobile network code of the external E-UTRAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the eNodeB identity of the external E-UTRAN cell. It uniquely

identifies an eNodeB within a PLMN. The 28-bit E-UTRAN cell identity is
comprised of the cell identity and the eNodeB identity (represented by
YES
the most significant 20 bits). The cell global identity (CGI) of an E-
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details, see 3GPP TS 36.413.

Indicates the cell identity of the external E-UTRAN cell. It uniquely

identifies a cell within an eNodeB. The 28-bit E-UTRAN cell identity is
comprised of the cell identity (represented by the least significant eight
YES
bits) and the eNodeB identity. The cell global identity (CGI) of an E-
UTRAN cell is comprised of the E-UTRAN cell identity and the PLMN ID.
For details, see 3GPP TS 36.413.
Indicates the DL EARFCN of the external E-UTRAN cell. For details, see
NO
3GPP TS 36.104.

Indicates whether to configure the uplink E-UTRA absolute radio

NO
frequency channel number (EARFCN) for the external E-UTRAN cell.

Indicates the uplink E-UTRA absolute radio frequency channel number

(EARFCN) of the external E-UTRAN cell. If the value of this parameter is
not specified, the default uplink EARFCN is used, which is calculated NO
based on the downlink EARFCN. For details about this parameter, see
3GPP TS 36.104.

Indicates the physical cell ID of the external E-UTRAN cell. For details,
NO
see 3GPP TS 36.331.
Indicates the tracking area code (TAC) of the external E-UTRAN cell.
Two TAC values 0x0000(0) and 0xFFFE(65534) are reserved according
NO
to the protocol and will not be used in future versions. Therefore, do not
use 0 or 65534 as a TAC value in TAC planning or configuration.

Indicates the name of the external E-UTRAN cell. NO

Indicates slave frequency bands of an external E-UTRAN cell. If the

operating frequency of an external E-UTRAN cell belongs to multiple
frequency bands, the downlink frequency of the frequency band with the
highest priority is configured by the DlEarfcn parameter, and frequency
bands with other priorities are configured by the
EutranExternalCellSlaveBand parameter and added in descending order NO
based on frequency band priorities. The frequency band priorities of an
external E-UTRAN cell are determined in network planning. It is
recommended that the frequency bands supporting UEs that comply with
3GPP TS 36.331 V8.16.0, 3GPP TS 36.331 V9.1.0, 3GPP TS 36.331
V10.5.0, or a later vision be configured as slave frequency bands.

Indicates the frequency band in which the cell operates. For details
YES
about this parameter, see 3GPP TS 36.104.
Indicates whether the neighbor cell can be selected for handovers during
roaming. This parameter is set to NO(No) by default.
If this parameter is set to YES(Yes), this neighboring cell can be selected
for handovers during roaming. If this parameter is set to NO(No), this
neighboring cell cannot be selected for handovers during roaming.
If the PLMN of the neighboring cell is included in the SPID-based NO
handover-allowable HPLMN list or this parameter is set to YES(Yes), this
neighboring cell can be selected for handovers.
In the boundaries of roaming areas and non-roaming areas, you are
advised to set this parameter to YES(Yes) to ensure that neighboring
cells in roaming areas can be selected for handovers.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the neighboring CDMA2000 band class. For details, see the
YES
BandclassCDMA2000 IE defined in 3GPP 36.331.

Indicates the ID of the operator. YES

Indicates whether to configure a dedicated cell-reselection priority based
NO
on the PLMN ID of the local cell for the CDMA2000 1xRTT band class.

Indicates the dedicated cell reselection priority for a CDMA2000 1xRTT

band class based on the PLMN ID of the local cell. The value 0 indicates
the lowest priority. If the related SPID configuration is specified, set this
priority to the one specified in the SPID configuration. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
NO
the cell reselection priorities of all PLMNs supported by a UE by using
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
CDMA2000 band class, which is broadcast in the system information.

Indicates whether to configure dedicated a cell-reselection priority based

NO
on the PLMN ID of the local cell for the CDMA2000 HRPD band class.

Indicates the dedicated cell reselection priority for a CDMA2000 HRPD

band class based on the PLMN ID of the local cell. The value 0 indicates
the lowest priority. If the related SPID configuration is specified, set this
priority to the one specified in the SPID configuration. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
NO
the cell reselection priorities of all PLMNs supported by a UE by using
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
CDMA2000 band class, which is broadcast in the system information.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the DL EARFCN of the operator that shares the neighboring E-

YES
UTRAN frequency. For details, see the 3GPP TS 36.104.

Indicates the mobile country code (MCC) of the operator that shares the
neighboring E-UTRAN frequency.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.
Indicates the mobile network code (MNC) of the operator that shares the
neighboring E-UTRAN frequency.
A public land mobile network (PLMN) ID is comprised of a mobile
network code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, the PLMN ID is
12345.

Indicates whether to configure the cell reselection priority. NO

Indicates the cell reselection priority of the operator that shares the
neighboring E-UTRAN frequency. The value 0 indicates the lowest
priority. If the related SPID configuration is specified, the cell reselection
priority specified in the SPID configuration is used. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
the cell reselection priorities of all PLMNs supported by a UE by using NO
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
neighboring E-UTRAN frequency, which is broadcast in the system
information.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the DL EARFCN of the Operator Configuration for Serving Cell

YES
in EUTRAN Frequency. For details, see the 3GPP TS 36.104.

Indicates the ID of the operator. YES

Indicates whether to configure a dedicated cell-reselection priority based

NO
on the PLMN ID of the local cell for the neighboring E-UTRAN frequency.
Indicates the cell reselection dedicated priority for an E-UTRAN
frequency based on the PLMN ID of the local cell. The value 0 indicates
the lowest priority. If the related SPID configuration is specified, the cell
reselection priority specified in the SPID configuration is used. If no
related SPID configuration is specified but this parameter is set, the
eNodeB delivers the cell reselection priorities of all PLMNs supported by NO
a UE by using the IE idleModeMobilityControlInfo in an RRC Connection
Release message to the UE. If no related SPID configuration is specified
and this parameter is not set, a UE uses the cell reselection priority of
the neighboring E-UTRAN frequency, which is broadcast in the system
information.

Indicates the ID of the local cell. It uniquely identifies a cell within an

YES
eNodeB.

Indicates the index of the GERAN carrier frequency group. It uniquely

YES
identifies a GERAN carrier frequency group.

Indicates the ID of the operator. YES

Indicates whether to configure a dedicated cell-reselection priority based

NO
on the PLMN ID of the local cell for the GERAN carrier frequency group.

Indicates the cell reselection dedicated priority for a GERAN frequency

based on the PLMN ID of the local cell. The value 0 indicates the lowest
priority. If the related SPID configuration is specified, set this priority to
the one specified in the SPID configuration. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
the cell reselection priorities of all PLMNs supported by a UE by using NO
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
neighboring GERAN carrier frequency group, which is broadcast in the
system information.

Indicates the cell identity of the local cell. It uniquely identifies a cell
YES
within an eNodeB.

Indicates the index of the GERAN carrier frequency group. It uniquely

YES
identifies a GERAN carrier frequency group.
Indicates the mobile country code (MCC) of the operator that shares the
neighboring GERAN carrier frequency group.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the operator that shares the
neighboring GERAN carrier frequency group.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates whether to configure the cell reselection priority of the operator

NO
that shares the neighboring GERAN carrier frequency group.

Indicates the cell reselection priority of the operator that shares the
neighboring GERAN carrier frequency group. The value 0 indicates the
lowest priority. If the related SPID configuration is specified, set this
priority to the one specified in the SPID configuration. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
the cell reselection priorities of all PLMNs supported by a UE by using NO
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
neighboring GERAN carrier frequency group, which is broadcast in the
system information.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the mobile country code of the neighboring UTRAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.
Indicates the mobile network code of the neighboring UTRAN cell.
The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the RNC ID of the neighboring UTRAN cell. The 28-bit UTRAN
cell ID is comprised of the RNC cell ID and the RNC ID that are
represented by the least significant 16 bits and the most significant 12
YES
bits, respectively. The formula for calculating the UTRAN cell ID is as
follows: UTRAN cell ID = RNC ID x 65536 + RNC cell ID. For details, see
3GPP TS 25.401.

Indicates the RNC cell ID of an external UTRAN cell. It uniquely

identifies a cell within an RNC. The 28-bit UTRAN cell ID is comprised of
the RNC cell ID and the RNC ID that are represented by the least
YES
significant 16 bits and the most significant 12 bits, respectively. The
formula for calculating the UTRAN cell ID is as follows: UTRAN cell ID =
RNC ID x 65536 + RNC cell ID. For details, see 3GPP TS 25.401.

Indicates whether to allow handover of UEs to the neighboring cell that is

NO
determined by the neighboring relation.

Indicates whether to permit or prohibit removal of the neighboring

NO
relationship by ANR.

Indicates whether this neighboring cell is automatically discovered by the

NO
ANR algorithm.
Indicates the priority of the neighboring cell during blind handovers. Blind
handover is a process in which the eNodeB instructs a UE to hand over
to a specified neighboring cell. There are 32 priorities altogether. The
NO
priority has a positive correlation with the value of this parameter. Note
that the value 0 indicates that blind handovers to the neighboring cell are
not allowed.

Indicates the priority of measurement on the neighboring UTRAN cell.

The eNodeB preferentially contains the information about a neighboring
NO
cell with this priority set to HIGH_PRIORITY while delivering a
measurement configuration.

Indicates whether the neighboring UTRAN cell is manually identified as a

neighboring cell overlapping the E-UTRAN cell. The default value is NO.
The parameter value YES indicates that the neighboring UTRAN cell is
manually identified as a neighboring cell overlapping the E-UTRAN cell. NO
The parameter value NO indicates that the neighboring UTRAN cell is
not manually identified as a neighboring cell overlapping the E-UTRAN
cell.
Indicates the measurement priority of the neighboring UTRAN cell. A
larger value indicates a higher priority. The measurement priorities can
be periodically and automatically arranged based on the number of times
that each neighboring UTRAN cell is measured. The neighboring UTRAN NO
cells for UTRAN measurement control, UTRAN flash blind redirections,
and UTRAN flash-CSFB-based redirections can be selected based on
the measurement priorities of neighboring UTRAN cells.
Indicates the name of the local cell. NO

Indicates the name of the UTRAN neighboring cell. NO

Indicates the control policy on ANR-related MOs, which can be defined
by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the ID of the eNodeB, which uniquely identifies an eNodeB

NO
within a PLMN.

Indicates the time of the latest RIM request received by the neighboring
NO
UTRAN cell.

Indicates the latest updated time of the system information that the
eNodeB receives from the neighboring UTRAN cell through the RIM NO
procedure.

Indicates the latest time that the eNodeB obtains the load information
NO
about the neighboring UTRAN cell through an RIM procedure.

Indicates the latest time that the eNodeB initiates an RIM procedure to
NO
obtain the load information about the neighboring UTRAN cell.

Indicates the load status of the neighboring UTRAN cell, which is

NO
obtained by the eNodeB through the latest RIM procedure.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.

Indicates the downlink UARFCN of the neighboring UTRAN frequency. YES

Indicates the ID of the operator. YES

Indicates whether to configure a dedicated cell-reselection priority based
NO
on the PLMN ID of the local cell for the UTRAN frequency.

Indicates the dedicated cell reselection priority for a UTRAN frequency

based on the PLMN ID of the local cell. The value 0 indicates the lowest
priority. If the related SPID configuration is specified, set this priority to
the one specified in the SPID configuration. If no related SPID
configuration is specified but this parameter is set, the eNodeB delivers
the cell reselection priorities of all PLMNs supported by a UE by using NO
the IE idleModeMobilityControlInfo in an RRC Connection Release
message to the UE. If no related SPID configuration is specified and this
parameter is not set, a UE uses the cell reselection priority of the
neighboring UTRAN frequency, which is broadcast in the system
information.

Indicates the cell identity of the local cell. It uniquely identifies a cell
YES
within an eNodeB.
Special UARFCNs: (412, 437, 462, 487, 512, 537, 562, 587, 612, 637,
662, 687)
Band 3:
Normal UARFCNs: [1162-1513]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [1537-1738]
Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
2087)
Band 5:
Normal UARFCNs: [4357-4458]
Special UARFCNs: (1007, 1012, 1032, 1037, 1062, 1087)
Band 6:
Normal UARFCNs: [4387-4413]
Special UARFCNs: (1037, 1062)
Band 7:
Normal UARFCNs: [2237-2563]
Special UARFCNs: (2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762,
2787, 2812, 2837, 2862, 2887, 2912)
YES
Band 8:
Normal UARFCNs: [2937-3088]
Special UARFCNs: none
Band 9:
Normal UARFCNs: [9237-9387]
Special UARFCNs: none
The UARFCN range in each TDD frequency band is shown as follows:
Band 1:
Normal UARFCNs: [9500-9600] and [10050-10125]
Special UARFCNs: none
Band 2:
Normal UARFCNs: [9250-9550] and [9650-9950]
Special UARFCNs: none
Band 3:
Normal UARFCNs: [9550-9650]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [12850-13100]
Special UARFCNs: (2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287,
Indicates the mobile country code (MCC) of the neighboring UTRAN cell.
A public land mobile network (PLMN) ID is comprised of an MCC and a
mobile network code (MNC).
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates the mobile network code (MNC) of the neighboring UTRAN

cell.
A public land mobile network (PLMN) ID is comprised of a mobile country
code (MCC) and an MNC.
YES
The MCC consists of three digits.
The MNC consists of two to three digits.
For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is
12345.

Indicates whether to configure the cell reselection priority of the operator

NO
that shares the neighboring UTRAN frequency.

Indicates the cell reselection priority of the operator that shares the
neighboring UTRAN frequency. The value 0 indicates the lowest priority.
If the related SPID configuration is specified, set this priority to the one
specified in the SPID configuration. If no related SPID configuration is
specified but this parameter is set, the eNodeB delivers the cell
NO
reselection priorities of all PLMNs supported by a UE by using the IE
idleModeMobilityControlInfo in an RRC Connection Release message to
the UE. If no related SPID configuration is specified and this parameter
is not set, a UE uses the cell reselection priority of the neighboring
UTRAN frequency, which is broadcast in the system information.

Indicates the cell ID of the local cell. It uniquely identifies a cell within an
YES
eNodeB.
Special UARFCNs:
(412,437,462,487,512,537,562,587,612,637,662,687)
Band 3:
Normal UARFCNs: [1162-1513]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [1537-1738]
Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
2087)
Band 5:
Normal UARFCNs: [4357-4458]
Special UARFCNs: (1007, 1012, 1032, 1037, 1062, 1087)
Band 6:
Normal UARFCNs: [4387-4413]
Special UARFCNs: (1037, 1062)
Band 7:
Normal UARFCNs: [2237-2563]
Special UARFCNs: (2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762,
2787, 2812, 2837, 2862, 2887, 2912)
YES
Band 8:
Normal UARFCNs: [2937-3088]
Special UARFCNs: none
Band 9:
Normal UARFCNs: [9237-9387]
Special UARFCNs: none
The UARFCN range in each TDD frequency band is shown as follows:
Band 1:
Normal UARFCNs: [9500-9600] and [10050-10125]
Special UARFCNs: none
Band 2:
Normal UARFCNs: [9250-9550] and [9650-9950]
Special UARFCNs: none
Band 3:
Normal UARFCNs: [9550-9650]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [12850-13100]
Special UARFCNs: (2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287,

Indicates the working mode supported by the UTRAN in the current

NO
UARFCN.

Indicates the TDD/FDD mode of the inter-RAT UTRAN. NO

Indicates whether to set the UL UARFCN of the cell on the UTRAN
frequency. If the value of this parameter is not specified, the default UL
UARFCN is used. For an UTRAN FDD cell, the way to calculate the
default UL UARFCN varies depending on whether the DL frequency is a
normal or special one.
The default UL UARFCN is calculated as follows if the DL frequency is a
normal one:
Band 1: UL UARFCN = DL UARFCN - 950;
Band 2: UL UARFCN = DL UARFCN - 400;
Band 3: UL UARFCN = DL UARFCN - 475;
Band 4: UL UARFCN = DL UARFCN - 2000;
Band 5: UL UARFCN = DL UARFCN - 225;
Band 6: UL UARFCN = DL UARFCN - 225; NO
Band 7: UL UARFCN = DL UARFCN - 600;
Band 8: UL UARFCN = DL UARFCN - 225;
Band 9: UL UARFCN = DL UARFCN - 475;
The default UL UARFCN is calculated as follows if the DL frequency is a
special one:
Band 2: UL UARFCN = DL UARFCN - 400;
Band 4: UL UARFCN = DL UARFCN - 300;
Band 5: UL UARFCN = DL UARFCN - 225;
Band 6: UL UARFCN = DL UARFCN - 225;
Band 7: UL UARFCN = DL UARFCN - 225;
For a TDD UTRAN cell, the UL UARFCN is the same as the DL
UARFCN. For details, see 3GPP TS 25.104 and 25.105.
Special UARFCNs: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262,
287)
Band 3:
Normal UARFCNs: [937-1288]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [1312-1513]
Special UARFCNs: (1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837,
1862)
Band 5:
Normal UARFCNs: [4132-4233]
Special UARFCNs: (782, 787, 807, 812, 837, 862)
Band 6:
Normal UARFCNs: [4162-4188]
Special UARFCNs: (812, 837)
Band 7:
Normal UARFCNs: [2012-2338]
Special UARFCNs: (2362, 2387, 2412, 2437, 2462, 2487, 2512, 2537,
2562, 2587, 2612, 2637, 2662, 2687)
NO
Band 8:
Normal UARFCNs: [2712-2863]
Special UARFCNs: none
Band 9:
Normal UARFCNs: [8762-8912]
Special UARFCNs: none
The UARFCN range in each TDD frequency band is shown as follows:
Band 1:
Normal UARFCNs: [9500-9600] and [10050-10125]
Special UARFCNs: none
Band 2:
Normal UARFCNs: [9250-9550] and [9650-9950]
Special UARFCNs: none
Band 3:
Normal UARFCNs: [9550-9650]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [12850-13100]
Special UARFCNs: (2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287,
Indicates whether to set the priority of a cell assigned with the UARFCN
used in cell reselection to UTRAN. For details about how UEs process
NO
frequency priorities during cell reselection, see section 5.2.4.1 of 3GPP
TS 36.304 (V12.4.0).
Indicates the cell reselection priority of the neighboring UTRAN
frequency. The value 0 indicates the lowest priority. The UE decides
whether to reselect a neighboring cell on the UTRAN frequency based
on the value of this parameter and the absolute priority of the serving
cell.
If the value of this parameter is larger than the absolute priority of the
serving cell, the UE starts measurements on neighboring cells on the
UTRAN frequency; then if the signal quality of some neighboring cells NO
meets the related conditions, the UE starts cell reselection.
If the value of this parameter is smaller than the absolute priority of the
serving cell, the UE starts the measurements only when the signal
quality of the serving cell is poor; then if the signal quality of some
neighboring cells meets the related conditions, the UE starts cell
reselection. Frequencies used for different RATs must be assigned
different cell reselection priorities. For details, see 3GPP TS 36.331.

Indicates the maximum power that the UE can apply to transmission on

the UTRAN frequency. It is used in criteria S to calculate the NO
compensated power. For details, see 3GPP TS 25.104.
Indicates the frequency offset of the cell on the UTRAN frequency. It
determines the probability of triggering measurement reports for events NO
B1 and B2. For details, see 3GPP TS 36.331.

Indicates the minimum quality level required for a cell on the UTRAN
frequency to become a candidate for reselection. This parameter is
applied only to reselection to UTRAN FDD cells. A neighboring cell on NO
the UTRAN frequency can become a candidate for reselection only when
the signal quality of the cell is better than the value of this parameter.
Indicates the RX level required for a neighboring cell on the UTRAN
frequency to become a candidate for selection. It is included in criteria S
and used in the evaluation for cell selection. During the evaluation for
cell reselection, the UE performs the following calculation: Srxlev =
NO
Measured RSRP value of a neighboring cell on the frequency - Value of
this parameter - Compensated power. If Srxlev for a neighboring cell is
better than a threshold for a time-to-trigger, reselection to the cell is
started. For details, see 3GPP TS 25.304.

Indicates the minimum RX level required for a neighboring cell on the

UTRAN frequency to become a candidate for reselection if the priority of
the frequency is higher than that of the serving frequency. After
measurements are started for neighboring cells on the UTRAN NO
frequency, the UE reselects to a neighboring cell on the frequency only if
the RX level of the cell is higher than the value specified by this
parameter for a time-to-trigger. For details, see 3GPP TS 36.331.

Indicates the minimum RX level required for a neighboring cell on the

UTRAN frequency to become a candidate for reselection if the priority of
the frequency is lower than that of the serving frequency. After
measurements are started for neighboring cells on the UTRAN
NO
frequency, the UE reselects to a neighboring cell on the frequency only if
the RX level of the serving cell is lower than a specified threshold and
that of the cell is higher than the value specified by this parameter for a
time-to-trigger. For details, see 3GPP TS 36.331.

Indicates the RSRQ-based minimum RX level required for a neighboring

cell on the frequency to become a candidate for reselection if the RSRQ-
based priority of the frequency is higher than that of the serving
frequency.
NO
After measurements are started for neighboring cells on the UTRAN
frequency, the UE reselects to a neighboring cell on the frequency only if
the RSRQ-based RX level of the cell is higher than the value specified
by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
Indicates the RSRQ-based minimum RX level required for a neighboring
cell on the frequency to become a candidate for reselection if the RSRQ-
based priority of the frequency is lower than that of the serving
frequency.
After measurements are started for neighboring cells on the frequency, NO
the UE reselects to a cell on the frequency only if the RSRQ-based RX
level of the serving cell is lower than a specified threshold and that of the
cell is higher than the value specified by this parameter for a time-to-
trigger. For details, see 3GPP TS 36.331.

Indicates the priority for the neighboring UTRAN frequency to carry PS

services. In coverage-based inter-RAT PS handovers, if
UtranFreqLayerMeasSwitch is turned on, the eNodeB determines the
UTRAN frequency to be delivered to a UE based on PS service
priorities. The eNodeB delivers the UTRAN frequency with the highest
NO
PS priority to the UE by default.In blind handovers to UTRAN, the target
cell for a blind handover is selected based on PS service priorities. The
cell on the UTRAN frequency with the highest PS priority is selected by
default.When this parameter is set to Priority_0 for a UTRAN frequency,
the UTRAN frequency is not included in PS service priority arrangement.
Indicates the circuit switched (CS) priority of the neighboring UTRAN
frequency, that is, the priority for the neighboring UTRAN frequency to
carry CS services. During CSFB-based CS service handovers with
UtranFreqLayerMeasSwitch being on, the eNodeB selects and delivers
the neighboring UTRAN frequencies based on the CS priorities when
starting measurements. The eNodeB preferentially delivers the UTRAN
frequency with the highest CS priority to measure. During CSFB-based NO
CS service handovers with UtranFreqLayerBlindSwitch being on, the
eNodeB selects the target cells for blind handovers on neighboring
UTRAN frequencies based on the CS priorities and preferentially selects
the target cell for blind handovers on the neighboring UTRAN frequency
with the highest CS priorities. If this parameter is set to Priority_0, this
neighboring UTRAN frequency is not prioritized.

Indicates the frequency priority based on which the eNodeB selects a

target frequency for blind redirection or contains a frequency in a
measurement configuration. If a blind redirection is triggered and the
target neighboring cell is not specified, the eNodeB selects a target
frequency based on this priority. If a measurement configuration is to be NO
delivered, the eNodeB preferentially delivers a frequency with the
highest priority. If this priority is set to 0 for a frequency, this frequency is
not selected as the target frequency for a blind redirection. A larger value
indicates a higher priority.
Indicates the priority for the neighboring UTRAN frequency to carry
CS+PS combined services. In measurement-based CSFB to UTRAN, if
UtranCsfbSteeringSwitch and UtranFreqLayerMeasSwitch are turned on,
the eNodeB determines the UTRAN frequency to be delivered to a UE in
RRC_CONNECTED mode based on the priority specified by this
parameter. The eNodeB preferentially delivers the UTRAN frequency
with the highest CS+PS combined service priority to the UE. In blind
NO
CSFB to UTRAN, if UtranCsfbSteeringSwitch and
UtranFreqLayerBlindSwitch are turned on, the target cell is selected
based on the priority specified by this parameter. The cell on the UTRAN
frequency with the highest priority is preferentially selected. If this
parameter is set to Priority_0, the UTRAN frequency is not included in
priority arrangement for neighboring UTRAN frequencies to carry CS+PS
combined services.

Indicates whether the coverage area of a UTRAN frequency is

continuous. The parameter value CONTINUOUS indicates that the
coverage area is continuous. The parameter value NON_CONTINUOUS
indicates that the coverage area is non-continuous. Only neighboring NO
UTRAN cells working at the UTRAN frequency that has continuous
coverage are considered in the determination of candidate cells for blind
CSFB to UTRAN.

Indicates the priority of the neighboring UTRAN frequency for load

sharing with UTRAN. The value 0 indicates the lowest priority. The
NO
neighboring UTRAN frequency with the highest priority is selected as the
target frequency for inter-RAT load sharing.
Indicates whether the UARFCN is specific to the primary frequency
band. Among the UARFCNs of the same frequency, if the
MasterBandFlag parameter is set to TRUE for one UARFCN and FALSE
for other UARFCNs, the former UARFCN is specific to the primary
frequency band while the latter UARFCNs are specific to secondary NO
frequency bands. In this case, only the UARFCN specific to the primary
frequency band is broadcast in system information block type 6 (SIB6). If
the MasterBandFlag parameter is set to FALSE for all UARFCNs of the
same frequency, only the smallest UARFCN is broadcast in SIB6.

Indicates whether a neighboring UTRAN cell on the UTRAN frequency is

a shared neighboring UTRAN cell. If this parameter is set to
BOOLEAN_TRUE, the UTRAN frequency is a shared frequency, and the
shared operator information must be checked on the OSS before all
NO
neighboring UTRAN cells are added. If this parameter is set to
BOOLEAN_FALSE, the UTRAN frequency is not a shared frequency,
and the shared operator information does not need to be checked on the
OSS before all neighboring UTRAN cells are added.
Indicates whether information about neighboring UTRAN cells and
external UTRAN cells configured on the frequency associated with the
serving cell can be maintained by ANR. If this parameter is set to NO
ALLOWED, the information can be maintained by ANR. If this parameter
is set to NOT_ALLOWED, the information cannot be maintained by ANR.

Indicates the single radio voice call continuity (SRVCC) priority of the
neighboring UTRAN frequency, this is, the priority for the neighboring
UTRAN frequency to carry SRVCC services. During coverage-based
inter-RAT SRVCC-based CS service handovers with
UtranFreqLayerMeasSwitch being on, the eNodeB selects and delivers
the neighboring UTRAN frequencies based on the SRVCC priorities NO
when starting measurements. The eNodeB preferentially delivers the
UTRAN frequency with the highest SRVCC priority to measure. If this
parameter is set to Priority_0, this neighboring UTRAN frequency is not
prioritized. A larger number in the parameter value indicates that the
neighboring UTRAN frequency has a higher SRVCC priority.
Indicates whether a UTRAN frequency is a frequency that can be shared
by the UMTS and LTE. If this parameter value is BOOLEAN_TRUE, the
UTRAN frequency is a frequency that can be shared by the UMTS and NO
LTE. If this parameter is set to BOOLEAN_FALSE, the UTRAN
frequency is dedicated to the UMTS.

Indicates whether to prioritize frequencies if neighboring UTRAN cells

whose neighbor relationships can be removed operate on different
UTRAN frequencies when ANR removes UTRAN neighbor relationships
from the NRT in which the number of neighbor relationships reaches the
maximum. A smaller parameter value indicates a lower frequency priority
and a higher probability of neighbor relationships with neighboring
UTRAN cells operating on the frequency being removed.
If all values of this parameter for all UTRAN frequencies are 0, the
eNodeB does not remove neighboring relationships based on UTRAN
frequency priorities and removes the candidate neighbor relationship
with the cell to which the number of UEs handed over from the local cell
is the smallest.
Consider that all values of this parameter for all UTRAN frequencies are
the same non-zero value. If the frequency serving the cell whose
NO
neighbor relationship is to be added has neighboring cells whose
neighbor relationships can be removed, the eNodeB removes the
neighbor relationship with the cell that operates on this frequency and to
which the number of UEs handed over from the local cell is the smallest.
If the frequency does not have neighboring cells whose neighbor
relationships can be removed, the eNodeB does not remove neighboring
relationships based on UTRAN frequency priorities and removes the
candidate neighbor relationship with the cell to which the number of UEs
handed over from the local cell is the smallest.
If not all values of this parameter for all UTRAN frequencies are the
same, the eNodeB removes the candidate UTRAN neighbor relationship
with the cell that operates on a frequency and to which the number of
UEs handed over from the local cell is the smallest based on frequency
priories in ascending order.

Indicates the mobile country code of the external UTRAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the mobile network code of the external UTRAN cell.

The PLMN consists of the MCC and the MNC.
The MCC consists of three digits. YES
The MNC consists of two to three digits.
For example, MCC = 123, MNC = 45, PLMN = 12345.

Indicates the RNC ID of the external UTRAN cell. The 28-bit UTRAN cell
ID is comprised of the RNC cell ID and the RNC ID that are represented
by the least significant 16 bits and the most significant 12 bits,
YES
respectively. The formula for calculating the UTRAN cell ID is as follows:
UTRAN cell ID = RNC ID x 65536 + RNC cell ID. For details, see 3GPP
TS 25.401.
Indicates the RNC cell ID of an external UTRAN cell. It uniquely
identifies a cell within an RNC. The 28-bit UTRAN cell ID is comprised of
the RNC cell ID and the RNC ID that are represented by the least
YES
significant 16 bits and the most significant 12 bits, respectively. The
formula for calculating the UTRAN cell ID is as follows: UTRAN cell ID =
RNC ID x 65536 + RNC cell ID. For details, see 3GPP TS 25.401.
(412,437,462,487,512,537,562,587,612,637,662,687)
Band 3:
Normal UARFCNs: [1162-1513]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [1537-1738]
Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062,
2087)
Band 5:
Normal UARFCNs: [4357-4458]
Special UARFCNs: (1007, 1012, 1032, 1037, 1062, 1087)
Band 6:
Normal UARFCNs: [4387-4413]
Special UARFCNs: (1037, 1062)
Band 7:
Normal UARFCNs: [2237-2563]
Special UARFCNs: (2587, 2612, 2637, 2662, 2687, 2712, 2737, 2762,
2787, 2812, 2837, 2862, 2887, 2912)
Band 8: NO
Normal UARFCNs: [2937-3088]
Special UARFCNs: none
Band 9:
Normal UARFCNs: [9237-9387]
Special UARFCNs: none
The UARFCN range in each TDD frequency band is shown as follows:
Band 1:
Normal UARFCNs: [9500-9600] and [10050-10125]
Special UARFCNs: none
Band 2:
Normal UARFCNs: [9250-9550] and [9650-9950]
Special UARFCNs: none
Band 3:
Normal UARFCNs: [9550-9650]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [12850-13100]
Special UARFCNs: (2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287,
Indicates whether to set the UL UARFCN for the external UTRAN cell. If
the value of this parameter is not specified, the default DL UARFCN is
used. For an UTRAN FDD cell, the way to calculate the default UL
UARFCN varies depending on whether the DL frequency is a normal or
special one.
The default UL UARFCN is calculated as follows if the DL frequency is a
normal one:
Band 1: UL UARFCN = DL UARFCN - 950;
Band 2: UL UARFCN = DL UARFCN - 400;
Band 3: UL UARFCN = DL UARFCN - 475;
Band 4: UL UARFCN = DL UARFCN - 2000;
Band 5: UL UARFCN = DL UARFCN - 225;
Band 6: UL UARFCN = DL UARFCN - 225; NO
Band 7: UL UARFCN = DL UARFCN - 600;
Band 8: UL UARFCN = DL UARFCN - 225;
Band 9: UL UARFCN = DL UARFCN - 475;
The default UL UARFCN is calculated as follows if the DL frequency is a
special one:
Band 2: UL UARFCN = DL UARFCN - 400;
Band 4: UL UARFCN = DL UARFCN - 300;
Band 5: UL UARFCN = DL UARFCN - 225;
Band 6: UL UARFCN = DL UARFCN - 225;
Band 7: UL UARFCN = DL UARFCN - 225;
For a TDD UTRAN cell, the UL UARFCN is the same as the DL
UARFCN. For details, see 3GPP TS 25.104 and 3GPP TS 25.105.
287)
Band 3:
Normal UARFCNs: [937-1288]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [1312-1513]
Special UARFCNs: (1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837,
1862)
Band 5:
Normal UARFCNs: [4132-4233]
Special UARFCNs: (782, 787, 807, 812, 837, 862)
Band 6:
Normal UARFCNs: [4162-4188]
Special UARFCNs: (812, 837)
Band 7:
Normal UARFCNs: [2012-2338]
Special UARFCNs: (2362, 2387, 2412, 2437, 2462, 2487, 2512, 2537,
2562, 2587, 2612, 2637, 2662, 2687)
Band 8: NO
Normal UARFCNs: [2712-2863]
Special UARFCNs: none
Band 9:
Normal UARFCNs: [8762-8912]
Special UARFCNs: none
The UARFCN range in each TDD frequency band is shown as follows:
Band 1:
Normal UARFCNs: [9500-9600] and [10050-10125]
Special UARFCNs: none
Band 2:
Normal UARFCNs: [9250-9550] and [9650-9950]
Special UARFCNs: none
Band 3:
Normal UARFCNs: [9550-9650]
Special UARFCNs: none
Band 4:
Normal UARFCNs: [12850-13100]
Special UARFCNs: (2112, 2137, 2162, 2187, 2212, 2237, 2262, 2287,

Indicates the duplex mode of the UTRAN cell. NO

Indicates whether to set the routing area code (RAC) of the external
UTRAN cell. This parameter must be set to CFG(Configure) if the NO
external UTRAN cell supports packet switched (PS) services.
Indicates the routing area code. NO

Indicates the primary DL scrambles of the external UTRAN cell. For

NO
details, see 3GPP TS 25.331.

Indicates the LAC of the external UTRAN cell. NO

Indicates the name of the external UTRAN cell. NO

Indicates whether the external UTRAN cell supports single radio voice
call continuity (SRVCC) for concurrent CS and PS services. If this
NO
parameter is set to BOOLEAN_FALSE, the external UTRAN cell does
not support SRVCC for concurrent CS and PS services.

Indicates slave frequency bands of an external UTRAN cell. If the

operating frequency of an external UTRAN cell belongs to multiple
frequency bands, the downlink frequency of the frequency band with the
highest priority is configured by the UtranDlArfcn parameter, and
frequency bands with other priorities are configured by the
UtranExternalCellSlaveBand parameter and added in descending order NO
based on frequency band priorities. The frequency band priorities of an
external UTRAN cell are determined in network planning. It is
recommended that the frequency bands supporting UEs that comply with
3GPP TS 36.331 V8.16.0, 3GPP TS 36.331 V9.1.0, 3GPP TS 36.331
V10.5.0, or a later vision be configured as slave frequency bands.

Indicates the frequency band in which the cell operates. For details
YES
about this parameter, see 3GPP TS 36.104.
Indicates whether the neighbor cell can be selected for handovers during
roaming. This parameter is set to NO(No) by default.
If this parameter is set to YES(Yes), this neighboring cell can be selected
for handovers during roaming. If this parameter is set to NO(No), this
neighboring cell cannot be selected for handovers during roaming.
If the PLMN of the neighboring cell is included in the SPID-based NO
handover-allowable HPLMN list or this parameter is set to YES(Yes), this
neighboring cell can be selected for handovers.
In the boundaries of roaming areas and non-roaming areas, you are
advised to set this parameter to YES(Yes) to ensure that neighboring
cells in roaming areas can be selected for handovers.

Indicates the control policy on ANR-related MOs, which can be defined

by the user or be based on the automatic neighbor relation (ANR)
algorithm. When this parameter is set to MANUAL_MODE, the ANR-
related MOs can be modified or removed by only the user. A failure
message is displayed when the user adds an existing MO. When this
parameter is set to AUTO_MODE, the ANR-related MOs can be modified
or removed by the user or based on the ANR algorithm. The MO removal
is successful even if the MO does not exist. An MO can be added both NO
by the user and based on the ANR algorithm. If an existing MO is to be
added, the MO is modified when the user performs the addition, but it
cannot be added based on the ANR algorithm. When the ANR-related
MOs are automatically added based on the ANR algorithm, this
parameter is set to AUTO_MODE by default. When the ANR-related
MOs are added by the user, this parameter can be set to AUTO_MODE
or MANUAL_MODE.

Indicates the ID of the baseband collaboration group. It uniquely

YES
identifies a baseband collaboration group in an eNodeB.

Indicates the ID of the baseband equipment that is associated with the

LTE baseband collaboration group. During the establishment of the LTE
baseband collaboration group, baseband processing units (BBPs) in a
BBU are added to a set of baseband equipment, and the ID of the NO
baseband equipment is associated with the LTE baseband collaboration
group ID. In this way, the BBPs are added to the LTE baseband
collaboration group.
Indicates the status of load balancing between baseband processing
units in an LTE baseband collaboration group.
The value LOAD_BALANCE_MODE_OPEN(Load Balancing Mode
Enabled) indicates that the BBP is involved in load balancing. If this BBP
is a primary BBP, UEs on this BBP can be transferred to the secondary
BBP. If this BBP is the secondary BBP, this BBP can accept UEs
transferred from primary BBPs.
The value LOAD_BALANCE_MODE_CLOSED(Load Balancing Mode NO
Disabled) indicates that this BBP is not allowed to transfer loads to
another BBP or accept loads transferred from other BBPs.
The value LOAD_BALANCE_MODE_UNAVAILABLE(Load Balancing
Mode Unavailable) indicates that load balancing is unavailable for the
BBP.
The value LOAD_BALANCE_MODE_BLOCKED(Load Balancing Mode
Blocked) indicates that load balancing is blocked for this BBP.

Indicates the reason why load balancing between baseband processing

units in an LTE baseband collaboration group is unavailable.
The value SWITCH_OFF(Switch Off) indicates that
L2LoadBalanceSwitch of the BbpCollaborateSwitch parameter is
deselected.
The value UNKNOWN(Unknown Reasons) indicates that the reason is
currently unknown.
The value BBP_CATEGORY_NOT_SUPPORTED(BBP Category Not
Supported) indicates that the BBP does not support baseband
collaboration.
The value BBP_STATUS_ABNORMAL(BBP Status Abnormal) indicates
that the BBP is abnormal and cannot be selected for baseband
NO
collaboration.
The value WORK_MODE_NOT_SUPPORTED(Work Mode Not
Supported) indicates that the BBP is a multi-mode BBP and does not
support baseband collaboration.
The value NULL is displayed when the BbpLoadBalanceStatus
parameter value is not LOAD_BALANCE_MODE_UNAVAILABLE(Load
Balancing Mode Unavailable).
The value BBP_STATUS_BLOCKED indicates that the BBP is blocked
and cannot transfer loads to or share loads from other BBPs.
The value INTER_BOARD_DATA_LINK_EXCEPTION(Inter-Board Data
Link Exception) indicates that the links between primary and secondary
BBPs are faulty and load balancing does not work.

Indicates the role of a BBP in an LTE baseband collaboration group.

If the parameter value is Primary BBP, the BBP is a primary BBP. The
primary BBP transfers certain UEs to the secondary BBP.
NO
If the parameter value is Secondary BBP, the BBP is a secondary BBP
and takes over partial load of primary BBPs.
If the parameter value is NULL, the BBP is not in the load sharing state.

Indicates the number of the cabinet where a BBP in the LTE baseband
NO
collaboration group is installed.
Indicates the number of the subrack where a BBP in the LTE baseband
NO
collaboration group is installed.

Indicates the number of the slot where a BBP in the LTE baseband
NO
collaboration group is installed.

Indicates the waiting time for blocking an LTE baseband collaboration

group when the BlockPriority parameter is set to
MIDDLE_PRIORITY_BLOCK(Middle Priority Block). The LTE baseband
collaboration group is blocked immediately once there is no UE
NO
transferred from LBBPc boards to the UBBPd within the timer length. If
there are such UEs within the timer length, the UEs are released after
the timer expires, and then the LTE baseband collaboration group is
blocked.
Indicates the load threshold of a BBP, LTE baseband collaboration on a
NO
BBP is enabled when the load of the BBP is greater than this threshold.
Indicates the load threshold of a BBP, LTE baseband collaboration on a
NO
BBP is disabled when the load of the BBP is lower than this threshold.

Indicates the priority of blocking an LTE baseband collaboration group. If

this parameter is set to HIGH_PRIORITY_BLOCK(High Priority Block),
the LTE baseband collaboration group is blocked immediately and the
UEs transferred from LBBPc boards to the UBBPd are released
immediately. If this parameter is set to
MIDDLE_PRIORITY_BLOCK(Middle Priority Block), the
BbpCollaborateBlockTimer parameter needs to be set. The LTE
baseband collaboration group is blocked immediately once there is no
NO
UE transferred from LBBPc boards to the UBBPd within the timer length.
If there are such UEs within the timer length, the UEs are released after
the timer expires, and then the LTE baseband collaboration group is
blocked. If this parameter is set to LOW_PRIORITY_BLOCK(Low Priority
Block), the LTE baseband collaboration group is blocked until there is no
UE transferred from LBBPc boards to the UBBPd. If this parameter is set
to UNBLOCK(Unblock), the LTE baseband collaboration group cannot
be blocked.
Indicates the length for detecting service abnormality when the devices
are suspected to experience soft failures. If service abnormality persists
within the period of time specified by this parameter while the devices NO
are suspected to experience soft failures, the devices are considered to
experience soft failures.

Indicates whether to mask ALM-25888 SCTP Link Fault.

S1(S1): When ALM-29201 S1 Interface Fault and ALM-25888 SCTP Link
Fault about an S1 interface are generated at the same time:
- If this option is selected, ALM-29201 S1 Interface Fault is reported and
ALM-25888 SCTP Link Fault is masked.
- If this option is deselected, ALM-25888 SCTP Link Fault is also
reported. NO
X2(X2): When ALM-29204 X2 Interface Fault and ALM-25888 SCTP Link
Fault about an X2 interface are generated at the same time:
- If this option is selected, ALM-29204 X2 Interface Fault is reported and
ALM-25888 SCTP Link Fault is masked.
- If this option is deselected, ALM-25888 SCTP Link Fault is also
reported.
Indicates the offset of the start time of a cell frame against a reference
clock source. This offset applies to all LTE TDD cells served by an NO
eNodeB.

Indicates the offset of the start time of a cell frame against a reference
clock source. This offset applies to all LTE FDD cells served by an NO
eNodeB.

Indicates the ID of the baseband equipment used by the centralized

clustering node. If this parameter is set to 255, the baseband equipment NO
used by the centralized clustering node is not specified.
Indicates the coordinated scheduling mode of the baseband equipment.
If this parameter is set to COORDINATED_SCHEDULING_ONLY, the
baseband equipment supports only coordinated scheduling. If this
parameter is set to COORDINATED_SCHEDULING_MIXING, the NO
baseband equipment supports both universal baseband processing and
coordinated scheduling, and this workmode applies only to LTE TDD
mode.

Indicates the interval between the time that the eNodeB reports
measurement information and the time that the coordinated information NO
delivered to the eNodeB takes effect.

Indicates whether to enable inter-eNodeB DL CoMP in cells under the

NO
centralized control node in Cloud BB scenarios.
Indicates the number of UEs scheduled by the centralized control node. NO

Indicates whether the interval between the time that the eNodeB reports
measurement information and the time that the coordinated information
NO
delivered to the eNodeB takes effect is fixedly configured or periodically
measured.

Indicates the operating mode of baseband processing units for LTE FDD
in the eNodeB.
If this parameter is set to NORMAL, cell capacities, the number of cells,
and supported features in the cells established on baseband processing
units remain unchanged.
The parameter value LBBP_LARGE_CAPACITY applies only to LBBPd3
boards. Compared with the parameter value NORMAL, the parameter
value LBBP_LARGE_CAPACITY enables an LBBPd3 to support more
2T4R cells with a bandwidth of 20 MHz per cell but fewer features for
the cells. Before setting this parameter to LBBP_LARGE_CAPACITY, NO
disable the following features: ultra high speed mobility, extended CP,
intra-subframe frequency hopping, and PUCCH-based uplink timing. All
cells established on the LBBPd3 are reactivated after this parameter is
set to LBBP_LARGE_CAPACITY. If PUCCH-based uplink timing is
enabled and then this parameter is set to LBBP_LARGE_CAPACITY, the
feature does not take effect after the cells are reactivated. If ultra high
speed mobility, extended CP, and intra-subframe frequency hopping are
enabled and then this parameter is set to LBBP_LARGE_CAPACITY, the
cells cannot be reactivated.
Indicates the operating mode of single frequency network (SFN) cells.
This eNodeB-level parameter applies to LTE FDD eNodeBs equipped
with LBBPd or UBBPd boards.
If this parameter is set to NORMAL, an SFN cell with a bandwidth of 10
MHz supports a maximum of 400 UEs, and an SFN cell with a bandwidth NO
of 5 MHz supports a maximum of 200 UEs.
If this parameter is set to LARGECAPABILITY, an SFN cell with a
bandwidth of 10 MHz supports a maximum of 1200 UEs, and an SFN
cell with a bandwidth of 5 MHz supports a maximum of 600 UEs.

Indicates whether to prohibit the eNodeB from setting up the cell sector
equipment or sector equipment group (that is not bound to a piece of
baseband equipment) on the baseband equipment that has been bound
to other cell sector equipment or sector equipment group. If this
NO
parameter is set to ON(On), the sector equipment or sector equipment
group that is not bound to the baseband equipment cannot be set up on
this baseband equipment if other sector equipment or sector equipment
group has been bound to the baseband equipment.

Indicates the ID of an intelligent optimization atom rule. YES

Indicates the measurement object type in intelligent optimization atom

rules. If this parameter is set to Cell, the measurement objects are cell-
NO
level atom rules. If this parameter is set to eNodeB, the measurement
objects are eNodeB-level atom rules.
Indicates the relationship between measurement objects and thresholds
in intelligent optimization atom rules. The parameter values
BIGGERTHAN, EQUALTO, SMALLERTHAN,
SMALLERTHANOREQUALTO, BIGGERTHANOREQUALTO, and NO
NOTEQUALTO indicate the conditions of greater than, equal to, smaller
than, smaller than and equal to, greater than and equal to, and not equal
to, respectively.

Indicates the threshold for selecting measurement objects with numerical

NO
values in intelligent optimization atom rules.

Indicates the measurement object in intelligent optimization atom rules. If

this parameter is set to USER_SPEC_OCCUPY_RATE, the
measurement object is the ratio of uplink synchronized UEs to the total
UEs. If this parameter is set to UL_PRB_UTILIZATION_RATE, the
measurement object is uplink physical resource block (PRB) usage. If NO
this parameter is set to DL_PRB_UTILIZATION_RATE, the
measurement object is the downlink PRB usage. If this parameter is set
to PDCCH_CCE_UTILIZATION_RATE, the measurement object is the
control channel element (CCE) usage on the PDCCH.

Indicates the ID of the intelligent optimization feature. YES

Indicates the name of the intelligent optimization feature. NO

Indicates the ID of the intelligent optimization function. YES

Indicates the name of the intelligent optimization function. NO

Indicates the ID of the intelligent optimization feature. NO

Indicates the measurement object type in intelligent optimization atom

rules. If this parameter is set to Cell, the measurement objects are cell-
NO
level atom rules. If this parameter is set to eNodeB, the measurement
objects are eNodeB-level atom rules.

Indicates the ID of the cell with which intelligent optimization atom rules
are applied. This parameter can only be queried by running the DSP
LIOPTFUNCTION command. Information displayed in the DSP
NO
LIOPTFUNCTION command output is specific to the cell. This parameter
setting does not take effect when the MeasureObjType parameter is set
to eNodeB.

Indicates the status of intelligent optimization atom rules. This parameter

can only be queried by running the DSP LIOPTFUNCTION command. If
this parameter value is NORMAL, the intelligent optimization is in the
NO
normal state. If this parameter value is PENALTY, the intelligent
optimization is under penalty, and all related intelligent optimization
measures cannot be taken.
Indicates the ID of an intelligent optimization rule. YES

Indicates the ID of the cell to which intelligent optimization atom rules are
applied. This parameter can only be queried by running the DSP
LIOPTRULE command. Information displayed in the DSP LIOPTRULE NO
command output is specific to the cell. This parameter setting does not
take effect when the MeasureObjType parameter is set to eNodeB.

Indicates the type of relationships between atom rules under an

intelligent optimization rule. If this parameter is set to AND, optimization
actions corresponding to the intelligent optimization rule are triggered
only when all atom rules under this intelligent optimization rule meet
NO
related requirements. If this parameter is set to OR, optimization actions
corresponding to the intelligent optimization rule are triggered when any
atom rule under this intelligent optimization rule meets related
requirements.

Indicates the type of relationships between atom rules under an

intelligent optimization rule. If this parameter is set to AND, optimization
actions corresponding to the intelligent optimization rule are triggered
only when all atom rules under this intelligent optimization rule meet
NO
related requirements. If this parameter is set to OR, optimization actions
corresponding to the intelligent optimization rule are triggered when any
atom rule under this intelligent optimization rule meets related
requirements.

Indicates the evaluation period of an intelligent optimization rule. NO

Indicates the action that must be taken according to an intelligent

optimization rule.
Note: When the network exits the heavy load status, the value of this
parameter does not need to be specified and the actual value restores to NO
the value configured before optimization. In this case, the value of the
ActionType parameter in the LIOptRule MO is RESUME(RESUME) and
the value of the Action parameter is NULL(empty string).

Indicates the ID of the intelligent optimization function. NO

Indicates the penalty duration of intelligent optimization rules under an
intelligent optimization function. If related conditions for an intelligent
optimization rule under an intelligent optimization function are met and
related adjustment measures are taken, the penalty duration starts.
During the penalty duration, parameter adjustment cannot be triggered NO
even if conditions for an intelligent optimization rule under this intelligent
optimization function are met. If this parameter is set to 0, no penalty is
imposed on intelligent optimization rules under an intelligent optimization
function.

Indicates the duplex mode to which an intelligent optimization rule

applies. If this parameter is set to FDD, the intelligent optimization rule
applies to FDD. If this parameter is set to TDD, the intelligent NO
optimization rule applies to TDD. If this parameter is set to BOTH, the
intelligent optimization rule applies to both FDD and TDD.

Indicates whether an intelligent optimization rule is activated. If the

parameter value is set to ACTIVATED, the intelligent optimization rule is
NO
activated. If the parameter value is set to DEACTIVATED, the intelligent
optimization rule is deactivated and does not take effect.

Indicates the state of parameter adjustment corresponding to an

intelligent optimization rule. This parameter can only be queried by
running the DSP LIOPTRULE command. If this parameter value is UN-
NO
EXECUTED, parameter adjustment is not performed. If this parameter
value is EXECUTING, parameter adjustment is being performed. If this
parameter is EXECUTED, parameter adjustment has been performed.

Indicates the ID of the intelligent optimization rule to which the intelligent

YES
optimization rule members associated.

Indicates the ID of the intelligent optimization atom rule to which the

YES
intelligent optimization rule members associated.

Indicates whether an intelligent optimization rule member is activated. If

this parameter is set to ACTIVATED, the intelligent optimization atom
rules apply to the evaluation of the associated intelligent optimization
NO
rule. If this parameter is set to DEACTIVATED, the intelligent
optimization atom rules do not apply to the evaluation of the associated
intelligent optimization rule.

Indicates the listed mobile country code (MCC) of a neighboring cell. An

MCC is a string of three decimal digits, each of which must be a digit YES
ranging from 0 to 9.

Indicates the listed mobile network code (MNC) of the listed PLMN of a
neighboring cell. An MNC is a string of two or three decimal digits, each YES
of which must be a digit ranging from 0 to 9.
Indicates the RAT of the neighboring cell corresponding to the PLMN. YES

Indicates the type of a PLMN list. If this parameter is set to

BLACK_LIST(BLACK_LIST), the cell corresponding to a black-listed
PLMN cannot be configured as a neighboring cell or an external cell by
ANR. If this parameter is set to GREY_LIST(GREY_LIST), the cell
corresponding to a gray-listed PLMN can be added as a neighboring cell
and an external cell by ANR, and the ANR marks a PLMN gray list label
on the neighboring cell. If this parameter is set to
NO
WHITE_LIST(WHITE_LIST), the cell corresponding to a white-listed
PLMN can be added as a neighboring cell and an external cell by ANR,
and the ANR marks a PLMN white list label on the neighboring cell. This
parameter is allowed to be set to only two values for all E-UTRAN,
UTRAN, or GERAN cells whose PLMNs are in the PLMN list. The other
parameter value is set for the E-UTRAN, UTRAN, or GERAN cells
whose PLMNs are not in the PLMN list by default.

Indicates the downlink E-UTRA absolute radio frequency channel

YES
number (EARFCN) of the candidate PCC.

Indicates the priority with which the candidate PCC is selected as the
PCC. The priority level has a positive correlation with the parameter
NO
value. This parameter is valid only if IdleModePccAnchorSwitch or
PccAnchorSwitch of the CaAlgoSwitch parameter is set to 1.
Indicates the reference signal received power (RSRP) threshold for
triggering event A4 during higher-priority carrier evaluation for PCC NO
selection.

Indicates the reference signal received quality (RSRQ) threshold for

triggering event A4 during higher-priority carrier evaluation for PCC
selection in scenarios where CA is configured based on frequencies. If NO
the measured RSRQ of an inter-frequency neighboring cell in the CA
group is greater than this parameter value, the CA UE reports event A4.

Indicates the identity of a passive intermodulation (PIM) cell group. It

uniquely identifies a PIM cell group within an eNodeB. A PIM cell group
consists of two cells sharing an antenna system. If the LPMP is used to
YES
perform PIM interference rejection, two cells sharing an antenna system
must be added to a PIM cell group.
This parameter applies only to FDD macro eNodeBs.

Indicates the local identity of cell 1 in the passive intermodulation (PIM)

NO
cell group.

Indicates the local identity of cell 2 in the passive intermodulation (PIM)

NO
cell group.

Indicates the sector equipment identity of cell 1 in the passive

NO
intermodulation (PIM) cell group.
Indicates the sector equipment identity of cell 2 in the passive
NO
intermodulation (PIM) cell group.

Indicates the PIM state of cell 1 in the passive intermodulation (PIM) cell
NO
group.

Indicates the PIM state of cell 2 in the passive intermodulation (PIM) cell
NO
group.

Indicates the downlink E-UTRA absolute radio frequency channel

YES
number (EARFCN) of the PCC.

Indicates the downlink EARFCN of the candidate SCC. YES

Indicates the priority with which the candidate SCC works as an SCC for
that PCC. A smaller value of this parameter indicates a lower priority, and NO
a larger value indicates a higher priority.

Indicates the offset of the actual threshold for CA event A2relative to the
value of the CarrAggrA2ThdRsrp parameter in the CaMgtCfg MO. If the
actual threshold is greater than -43 dBm, the value of -43 dBm takes NO
effect. If the actual threshold is less than -140 dBm, the value of -140
dBm takes effect.

Indicates the offset of the actual threshold for CA event A4 relative to the
value of the CarrAggrA4ThdRsrp parameter in the CaMgtCfg MO. If the
actual threshold is greater than -43 dBm, the value of -43 dBm takes NO
effect. If the actual threshold is less than -140 dBm, the value of -140
dBm takes effect.
Indicates queue scheduling weight 0. A larger parameter value indicates
NO
a higher priority.

Indicates queue scheduling weight 1. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 2. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 3. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 4. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 5. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 6. A larger parameter value indicates

NO
a higher priority.

Indicates queue scheduling weight 7. A larger parameter value indicates

NO
a higher priority.

Indicates the threshold for removing a neighbor relationship with a cell by

ANR based on the handover success rate. The threshold is the
percentage of the number of successful handovers to the total number of
handovers from the local cell to the neighboring cell. For example, an
external cell is configured as a neighboring cell for all cells under an
eNodeB, this neighboring cell permits automatic removal of the NO
neighboring relationship by ANR and the ctrlmode is Auto_Mode. If the
success rate of handovers from each cell under the eNodeB to this
neighboring cell is lower than or equal to this threshold after a
measurement period, the corresponding external cell and the neighbor
relationship with this cell are automatically removed.
Indicates the total number of handovers to a neighboring cell above
which ANR determines whether to remove the neighbor relationship with
this cell from the NRT or set the NoHoFlag parameter for this cell to NO
FORBID_HO_ENUM(Forbid Ho) on the basis of the handover success
rate.
Indicates the length of a measurement period. Based on the handover
success rate collected within a measurement period, ANR determines
whether to remove a neighbor relationship with a neighboring cell from NO
the NRT or set the NoHoFlag parameter for the neighboring cell to
FORBID_HO_ENUM(Forbid Ho).

Indicates the number of periodic measurement reports sent for fast ANR. NO

Indicates the interval at which periodic measurement reports are sent for
NO
fast ANR.
Indicates the fast ANR checking timer. When the timer is expired, the
NO
eNodeB automatically checks whether to disable fast ANR.

Indicates the reference signal received power (RSRP) threshold for intra-
RAT fast ANR. If the signal quality in a neighboring E-UTRAN cell
NO
reported by the UE is lower than the threshold, the cell is not
automatically added as an external cell of the eNodeB.

Indicates the maximum allowed number of UEs that perform intra-RAT

measurements for fast ANR. After the number of UEs performing intra-
NO
RAT measurements for fast ANR reaches the maximum number, intra-
RAT measurements for fast ANR will not be performed on other UEs.
Indicates the maximum allowed number of UEs that perform inter-RAT
measurements for fast ANR. After the number of UEs performing inter-
NO
RAT measurements for fast ANR reaches the maximum number, inter-
RAT measurements for fast ANR will not be performed on other UEs.

Indicates the threshold above which the eNodeB enters the monitoring
state for intra-RAT fast ANR. The threshold is expressed as the number NO
of UEs that have performed measurements for intra-RAT fast ANR.

Indicates the threshold above which the eNodeB enters the monitoring
state for inter-RAT fast ANR. The threshold is expressed as the number NO
of UEs that have performed measurements for inter-RAT fast ANR.
Indicates the mode for optimizing neighbor relationships. If this
parameter is set to FREE(FREE), the eNodeB automatically optimizes
neighbor relationships using ANR. If this parameter is set to
CONTROLLED(CONTROLLED), the eNodeB reports the neighbor
relationships to be optimized to the U2000 and the optimization is
subject to manual confirmation. Options EutranCtrlOptMode, NO
UtranCtrlOptMode, and GeranCtrlOptMode of the OptModeStrategy
parameter control whether to report neighbor relationships with E-
UTRAN cells, UTRAN cells, and GERAN cells, respectively. No options
are designed to control whether to report neighbor relationships with
CDMA2000 cells.

Indicates the length of a measurement period within which the eNodeB

determines whether to remove the neighbor relationship with a
neighboring cell based on the number of handovers from the local cell to
the neighboring cell and the number of measurement reports that include
the neighboring cell when the number of neighbor relationships in the
NRT has reached the maximum and a new neighbor relationship needs
to be added to the NRT by ANR.
This parameter is also used for the determination of external cell removal
from a neighboring cell list (NCL). Within four consecutive measurement
NO
periods, if the neighbor relationship corresponding to an external cell is
not added to the NRT, and the local eNodeB is not configured with an X2
interface with the peer eNodeB that serves this external cell, this external
cell is removed from the NCL.
This parameter is also used for the determination of removing redundant
neighbor relationships from the NRT. If no UEs are handed over to a
neighboring cell from the local cell within four consecutive measurement
periods, the neighbor relationship with this neighboring cell is removed
from the NRT.

Indicates the threshold of the total number of handovers from the local
cell to all neighboring cells, above which the eNodeB determines
whether to remove neighbor relationships from an NRT when the number
of neighbor relationships has reached the maximum or whether to
periodically remove redundant neighbor relationships from the NRT.
Consider that the number of neighbor relationships in the NRT has
reached its maximum, and a new neighbor relationship needs to be
added by ANR. If the total number of handovers (of all types) from the
local cell to all neighboring cells in the last measurement period specified NO
by the StatisticPeriodForNRTDel parameter reaches this parameter
value, the eNodeB removes a neighbor relationship from the NRT.
In periodic redundant neighbor relationship removal, the eNodeB
removes redundant neighbor relationships if the total number of
handovers (of all types) from the local cell to all neighboring cells
reaches this parameter value within four consecutive measurement
periods. The measurement period is specified by the
StatisticPeriodForNRTDel parameter.
Indicates the switch used to enable or disable proactive PCI conflict
detection. Within a specified duration after this switch is turned on, the
eNodeB delivers measurement configurations for proactive PCI conflict NO
detection to UEs that meet specific requirements. Then, the eNodeB
starts the detection based on the measurement reports from the UEs.

Indicates the start time of the active PCI conflict detection. If the stop
time is earlier than or the same as the start time, the stop time is NO
assumed to be the time of the next day.
Indicates the stop time of the active PCI conflict detection. If the stop
time is earlier than or the same as the start time, the stop time is NO
assumed to be the time of the next day.

Indicates the received signal code power (RSCP) threshold for fast ANR
with UTRAN. If the signal quality in a neighboring UTRAN cell reported
NO
by the UE is lower than the threshold, the cell is not automatically added
as an external cell of the eNodeB.
Indicates the received signal strength indicator (RSSI) threshold for fast
ANR with GERAN. If the signal quality in a neighboring GERAN cell
NO
reported by the UE is lower than the threshold, the cell is not
automatically added as an external cell of the eNodeB.
Indicates the pilot strength threshold for fast ANR with CDMA2000
1xRTT. If the signal quality in a neighboring CDMA2000 1xRTT cell
NO
reported by the UE is lower than the threshold, the cell is not
automatically added as an external cell of the eNodeB.
Indicates the pilot strength threshold for fast ANR with CDMA2000
HRPD. If the signal quality in a neighboring CDMA2000 HRPD cell
NO
reported by the UE is lower than the threshold, the cell is not
automatically added as an external cell of the eNodeB.

Indicates the threshold based on which intra-RAT ANR automatically sets

the NoHoFlag of a neighboring cell to FORBID_HO_ENUM(Forbid Ho)
when the handover success rate is equal to or less than the
NoHoSetThd parameter value. The threshold is the percentage of the
number of successful handovers to the total number of handovers from
NO
the local cell to the neighboring cell. If the handover success rate is
equal to or less than the threshold within a measurement period
specified by the StatisticPeriod parameter, intra-RAT ANR automatically
sets the NoHoFlag of the neighboring cell to FORBID_HO_ENUM(Forbid
Ho).
Indicates a threshold for removing a neighbor relationship from an E-
UTRAN NRT. When the NRT reaches its capacity and ANR needs to add
a new neighbor relationship to the NRT, ANR removes an old neighbor
relationship with a cell from the NRT if the number of handovers to this
cell is less than the threshold.
If this parameter is set to 0, ANR removes the neighbor relationship with NO
a cell from an NRT not based on the number of handovers to this cell but
based on the number of measurement reports on this cell.
If this parameter is set to another value, ANR can remove the neighbor
relationship with a cell from an NRT if the number of handovers to this
cell is less than the threshold.

Indicates the policy based on which fast ANR adds a detected cell to an
NCL and adds the neighbor relationship with the detected cell to an NRT
of the source cell.
If this parameter is set to NCL_MODE(NCL Mode), fast ANR only adds a
detected cell that meets certain conditions to an NCL.
If this parameter is set to NCL_NRT_MODE(NCL and NRT Mode), fast
ANR adds a detected cell that meets certain conditions to an NCL and
then adds the neighboring relationship with the detected cell that is in the
NO
NCL to the NRT of the source cell.
If this parameter is set to NRT_MODE(NRT_MODE), fast ANR adds a
detected cell that meets certain conditions and with which the neighbor
relationship is not in an NRT of the source cell to an NCL and adds the
neighbor relationship with the detected cell to an NRT of the source cell
based on CGI reading. Neighboring relationships with cells that meet
certain conditions and are in an NCL cannot be directly added to the
NRT.
Indicates the policy based on which intra-RAT event-triggered ANR adds
a neighbor relationship to an NRT.
If this parameter is set to BASED_NCL, intra-RAT event-triggered ANR
can add a neighbor relationship to an NRT based on the NCL. NO
If this parameter is set to NOT_BASED_NCL, intra-RAT event-triggered
ANR adds a neighbor relationship to an NRT based on the CGI reported
from the UE but not based on the NCL.
Indicates the policy based on which the eNodeB selects UEs to perform
cell global identification (CGI) reading for ANR.
If this parameter is set to CA_UE_CAP(CA UE Capability), the eNodeB
does not select the CA UEs that support the CA bands in the CA band
combinations supported by the eNodeB.
If this parameter is set to CA_UE_CARRIER_NUM(CA UE Carrier NO
Number), the eNodeB does not select the CA UEs that are each served
by more than one carrier.
If this parameter is set to ANR_UE_CAP(ANR UE Capability), the
eNodeB does not select the UEs that do not support ANR, that is, the
eNodeB does not select the UEs that do not support CGI reading.
Indicates whether the eNodeB can initiate handovers to a newly
detected neighboring cell, with which the neighbor relationship is to be
processed by the OSS. When the OptMode parameter in the ANR MO is
set to CONTROLLED, the eNodeB reports the newly detected
neighboring cell to the OSS for manual process. If this parameter is set
NO
to PERMIT_HO, the eNodeB can initiate handovers to the newly
detected neighboring cell before the corresponding neighbor relationship
is manually processed. If this parameter is set to FORBID_HO, the
eNodeB cannot initiate handovers to the newly detected neighboring cell
before the corresponding neighbor relationship is manually processed.
Indicates whether smart preallocation takes effect during ANR-triggered
cell global identification (CGI) reading. Consider that
SmartPreAllocationSwitch of the UlSchSwitch parameter is on. Setting
NO
this parameter to DISABLE indicates that smart preallocation does not
take effect. Setting this parameter to ENABLE indicates that smart
preallocation takes effect.

Indicates whether the eNodeB directly sets the No handover indicator

parameter to FORBID_HO_ENUM for an intra-RAT neighboring cell if the
neighboring cell meets the requirements on the number of handover
attempts from the local cell to the neighboring cell and the handover
success rate within a specified measurement period. When this
parameter is set to NO_CHECK, the eNodeB directly sets the No
NO
handover indicator parameter to FORBID_HO_ENUM for this
neighboring cell. When this parameter is set to PCI_CHECK, the
eNodeB first instructs the UE to read the CGI of the neighboring cell with
the aim to detect unknown neighboring cells with the same PCI and then
determines whether to set the No handover indicator parameter to
FORBID_HO_ENUM for this neighboring cell.
Indicates the policy based on which inter-RAT event-triggered ANR with
UTRAN adds a neighbor relationship to an NRT.
If this parameter is set to BASED_NCL(BASED_NCL), this type of ANR
adds neighbor relationships to NRTs based on NCLs. NO
If this parameter is set to NOT_BASED_NCL(NOT_BASED_NCL), this
type of ANR adds neighbor relationships to NRTs based on CGIs
reported by UEs.
Indicates the policy based on which inter-RAT event-triggered ANR with
GERAN adds a neighbor relationship to an NRT.
If this parameter is set to BASED_NCL(BASED_NCL), this type of ANR
adds neighbor relationships to NRTs based on NCLs. NO
If this parameter is set to NOT_BASED_NCL(NOT_BASED_NCL), this
type of ANR adds neighbor relationships to NRTs based on CGIs
reported by UEs.
Indicates whether the eNodeB selects UEs that are performing VoLTE
services to perform ANR-related measurements. This parameter includes
the following options:
UTRAN_EVENT_ANR_WITH_VOIP_MODE: An eNodeB can select UEs
with bearers with a QCI of 1 to perform measurements for event-
triggered ANR with UTRAN only if this option is selected.
NO
GERAN_EVENT_ANR_WITH_VOIP_MODE: An eNodeB can select UEs
with bearers with a QCI of 1 to perform measurements for event-
triggered ANR with GERAN only if this option is selected.
CDMA_EVENT_ANR_WITH_VOIP_MODE: An eNodeB can select UEs
with bearers with a QCI of 1 to perform measurements for event-
triggered ANR with CDMA2000 only if this option is selected.
Indicates the length of the timer of CGI reading for event-triggered ANR
NO
with UTRAN.

Indicates the length of the timer of CGI reading for event-triggered ANR
NO
with GERAN.
EUTRAN_DELREDUNDANCENCELL: If this check box is selected, the
eNodeB periodically detects for neighboring E-UTRAN cells to which no
UEs are handed over from the local cell and removes the neighbor
relationships with the cells from NRTs.
UTRAN_DELREDUNDANCENCELL: If this check box is selected, the
eNodeB periodically detects for neighboring UTRAN cells to which no
UEs are handed over from the local cell and removes the neighbor
relationships with the cells from the NRT.
GERAN_DELREDUNDANCENCELL: If this check box is selected, the
eNodeB periodically detects for neighboring GERAN cells to which no
UEs are handed over from the local cell and removes the neighbor
relationships with the cells from the NRT.
UTRAN_DELERRORNCELL: If this check box is selected, the eNodeB
periodically detects for inappropriate neighboring UTRAN cells for which
the incoming handover success rate is lower than the specified threshold
and removes the external cell entries of the cells and neighbor
relationships with the cells from the NCL and NRT, respectively.
GERAN_DELERRORNCELL: If this check box is selected, the eNodeB
periodically detects for inappropriate neighboring GERAN cells for which
NO
the incoming handover success rate is lower than the specified threshold
and removes the external cell entries and neighbor relationships with the
cells from the NCL and NRT, respectively.
EUTRAN_DELCELLERRORNCELL: If this check box is selected, the
eNodeB periodically detects for inappropriate neighboring E-UERAN
cells for which the cell-specific incoming handover success rate is lower
than the specified threshold and then removes the corresponding
external cell entries and neighbor relationships with the cells from the
NRT.
If event-triggered ANR and automatic neighbor relationship removal for
an RAT are enabled, the mechanism of inappropriate neighboring E-
UERAN cell configuration removal automatically takes effect. With this
mechanism, the eNodeB periodically detects for inappropriate
neighboring E-UERAN cells of which the cell-specific incoming handover
success rate is lower than the specified threshold and then removes the
corresponding external cell entries and neighbor relationships with the
cells from the NCL and NRT, respectively.
If event-triggered ANR and automatic neighbor relationship removal for
an RAT are enabled, the mechanism of inappropriate neighboring cell

Indicates whether to report neighbor relationships with cells in different

RATs when the OptMode parameter in the ANR MO is set to
CONTROLLED(CONTROLLED). This parameter includes the following
options:
EutranCtrlOptMode: Indicates whether to report neighbor relationships
with E-UTRAN cells. If this option is selected, the eNodeB reports
neighbor relationships with E-UTRAN cells to the U2000, and the
neighbor relationship optimization is subject to manual confirmation on
the U2000. If this option is deselected, the eNodeB automatically
processes the neighbor relationships with E-UTRAN cells.
UtranCtrlOptMode: Indicates whether to report neighbor relationships
NO
with UTRAN cells. If this option is selected, the eNodeB reports neighbor
relationships with UTRAN cells to the U2000, and the neighbor
relationship optimization is subject to manual confirmation on the U2000.
If this option is deselected, the eNodeB automatically processes the
neighbor relationships with UTRAN cells.
GeranCtrlOptMode: Indicates whether to report neighbor relationships
with GERAN cells. If this option is selected, the eNodeB reports neighbor
relationships with GERAN cells to the U2000, and the neighbor
relationship optimization is subject to manual confirmation on the U2000.
If this option is deselected, the eNodeB automatically processes the
neighbor relationships with GERAN cells.
Indicates a threshold for removing a neighbor relationship from a UTRAN
NRT. When the NRT reaches its capacity and ANR needs to add a new
neighbor relationship to the NRT, ANR removes an old neighbor
relationship with a cell from the NRT if the number of handovers to this
cell is less than the threshold.
If this parameter is set to 0, ANR removes the neighbor relationship with NO
a cell from an NRT not based on the number of handovers to this cell but
based on the number of measurement reports on this cell.
If this parameter is set to another value, ANR can remove the neighbor
relationship with a cell from an NRT if the number of handovers to this
cell is less than the threshold.

Indicates a threshold for removing a neighbor relationship from a

GERAN NRT. When the NRT reaches its capacity and ANR needs to add
a new neighbor relationship to the NRT, ANR removes an old neighbor
relationship with a cell from the NRT if the number of handovers to this
cell is less than the threshold.
If this parameter is set to 0, ANR removes the neighbor relationship with NO
a cell from an NRT not based on the number of handovers to this cell but
based on the number of measurement reports on this cell.
If this parameter is set to another value, ANR can remove the neighbor
relationship with a cell from an NRT if the number of handovers to this
cell is less than the threshold.

Indicates the penalty statistics period during which a deleted neighbor

relationship with an E-UTRAN or UTRAN cell can be added to the
neighboring relation table (NRT) again if the number of times
NO
neighboring E-UTRAN or UTRAN cell addition is triggered is greater than
or equal to the value of the EutranNcellDelPunNum or
UtranNcellDelPunNum parameter.
Indicates the number of times penalty statistics about neighboring E-
UTRAN cell deletion are collected. When a neighbor relationship with an
E-UTRAN cell is deleted, it can be added to the NRT again if the number NO
of times neighboring E-UTRAN cell addition is triggered is greater than
or equal to the value of this parameter.
Indicates the number of times penalty statistics about neighboring
UTRAN cell deletion are collected. When a neighbor relationship with a
UTRAN cell is deleted, it can be added to the NRT again if the number of NO
times neighboring UTRAN cell addition is triggered is greater than the
value of this parameter.

Indicates the period for automatic optimization on neighboring

measurement priorities. The neighboring measurement priorities are
arranged based on the number of times that each neighboring cell is
measured within the optimization period. Suggestions on neighboring
cell measurement priority arrangement are exported after the
NO
optimization period. The period is one week by default. Neighboring cell
selection in handovers cannot be performed based on the arranged
neighboring cell measurement priorities within the time after the
optimization period ends but before the arranged neighboring cell
measurement priorities are obtained.

Indicates the length of the measurement period for neighboring cell

classification management. Within a specified measurement period, if
the number of handovers from the source cell to a neighboring cell
reaches the HoAttemptThd, the neighboring cell is labeled as FORMAL. NO
Within four consecutive specified measurement periods, if the number
cannot reach the HoAttemptThd, the neighboring cell is labeled as
EXTENDED.
Indicates the handover number threshold for neighboring cell
classification management. Within a specified measurement period, if
the number of handovers from the source cell to a neighboring cell
reaches this threshold, the neighboring cell is labeled as FORMAL. NO
Within four consecutive specified measurement periods, if the number
cannot reach this threshold, the neighboring cell is labeled as
EXTENDED.

Indicates the device number of the BF antenna, it uniquely identifies a

YES
RET within an eNodeB.
Indicates the manufacturer of the BF antenna. NO

Indicates the cabinet number of the RRU connecting to the BF antenna. NO

Indicates the subrack number of the RRU connecting to the BF antenna. NO

Indicates the slot number of the RRU connecting to the BF antenna. NO

Indicates the model of the BF antenna. Set this parameter to RAE if the
antenna weight must be queried based on the RAE. RAE is case- NO
insensitive.

Indicates the configured tilt of the BF antenna. NO

Indicates the beamwidth formed after beamforming. NO

Indicates the frequency band in which the BF antenna operates. NO

Indicates the type of the BF antenna. NO

Indicates the degrees that an intelligent antenna deflects the beam in the
horizontal azimuth from the mechanical azimuth based on the weight.
(The mechanical azimuth of the antenna is used as a normal, clockwise NO
deflection is a positive number, and counterclockwise deflection is a
negative number.)

Indicates the polarization mode of the BF antenna. NO

Indicates the beamwidth of the antenna element. NO

Indicates the number of physical antenna ports to which the BF antenna
NO
is connected.

Indicates the amplitude offset at physical antenna port 1 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 1 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the amplitude offset at physical antenna port 2 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 2 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the amplitude offset at physical antenna port 3 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 3 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the amplitude offset at physical antenna port 4 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 4 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
two ports. Each port may consist of multiple physical antenna ports.

Indicates the amplitude offset at physical antenna port 1 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
four ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 1 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
four ports. Each port may consist of multiple physical antenna ports.

Indicates the amplitude offset at physical antenna port 2 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
four ports. Each port may consist of multiple physical antenna ports.

Indicates the phase offset at physical antenna port 2 when the BF

antenna is used and cell-specific reference signals are transmitted from NO
four ports. Each port may consist of multiple physical antenna ports.
Indicates the ID of the file transfer session. NO

Indicates the statistic period for blind neighboring cell optimization.

Information about CSFB-triggered measurement-based handovers or
CSFB-triggered blind handovers is collected within the statistic period, NO
and suggestions on blind neighboring cell optimization are exported after
the statistic period. The statistic period is seven days by default.
Indicates the sampling number threshold of handovers from the E-
UTRAN cell to neighboring cells. During the planning of neighboring cells
for blind handovers, if the number of CSFB-triggered measurement-
based handover attempts from the E-UTRAN cell to neighboring cells
working at a frequency (or frequency group) within a measurement
period is greater than this parameter value, neighboring cells working at
the frequency (or frequency group) can be selected as candidate cells in NO
blind handovers. In blind neighboring cell optimization, if the number of
CSFB-triggered blind handover attempts from the E-UTRAN cell to a
neighboring cell that has been selected as a candidate cell in blind
handovers within a measurement period is greater than this parameter
value, this neighboring cell can remain as a candidate cell in blind
handovers.
Indicates the handover success rate threshold for determining whether a
neighboring cell can be selected as a candidate cell in blind handovers.
If the success rate of measurement-based handovers for a UE from the
NO
E-UTRAN cell to a neighboring cell is greater than or equal to this
parameter value within a measurement period, the neighboring cell can
be selected as a candidate cell in blind handovers.

Indicates the CSFB-triggered measurement-based handover attempt

threshold for determining whether a neighboring cell can be selected as
a candidate cell in blind handovers. In a measurement period, the ratio of
the CSFB-triggered measurement-based handover attempts from the E-
UTRAN cell to a neighboring cell to all CSFB-triggered measurement- NO
based handover attempts from the E-UTRAN cell to all neighboring cells
working on the corresponding frequency (or frequency group) is
measured. If the ratio is greater than or equal to this threshold, the
neighboring cell can be selected as a candidate cell in blind handovers.

Indicates the blind handover success rate threshold for determining

whether a neighboring cell selected as a candidate cell in blind
handovers can remain as a candidate cell in blind handovers. If the blind
handover success rate of handing over a UE from the E-UTRAN cell to
NO
the neighboring cell that has been selected as a candidate cell in blind
handovers is less than or equal to this parameter value within a
measurement period, the neighboring cell cannot remain as a candidate
cell in blind handovers.

Indicates the mode for optimizing neighboring cells for blind handovers.
If this parameter is set to FREE, the eNodeB automatically changes the
priorities of neighboring cells in blind handovers. If this parameter is set
to CONTROLLED, the eNodeB only reports the configuration of and NO
optimization on neighboring cells for blind handovers to the U2000, and
the U2000 delivers the configuration of and optimization on the
neighboring cell after users confirm the configuration and optimization.
Indicates a differentiated services code point (DSCP) for IP packets.
Different types of traffic can be assigned different DSCPs within the YES
range of 1 to 63.

Indicates a service description. NO

Indicates whether to provide rates in two phases for QoS purposes. This
switch is required only for video, not for other services. If this switch is
turned on for video, the eNodeB provides an initial acceleration in the
NO
first phase and a normal rate guarantee in the second phase. If this
switch is turned off, the eNodeB provides a normal rate guarantee from
the start.

Indicates the QoS in the first phase if the QoS Policy Time Switch is
turned on for video, or the QoS across the entire process if this switch is NO
turned off.

Indicates the time length of the first phase in which the eNodeB provides
NO
an initial acceleration for video.

Indicates the QoS in the second phase after the initial acceleration for
video. When QosPolicyTimeSwitch is ON and QosPolicyId is set,
SecQosPolicy shall be set within the range of 0~127. When NO
QosPolicyTimeSwitch is OFF, SecQosPolicyId is set to be 255 by
default.

Indicates the value N in the P/N rule for QoE-based handover decision. If
the throughput is unsatisfactory for P consecutive times during the NO
measurement period N, QoE-based handover is triggered.
Indicates the value P in the P/N rule for QoE-based handover decision. If
the throughput is unsatisfactory for P consecutive times during the NO
measurement period N, QoE-based handover is triggered.

Indicates the ID of a user-defined QoS policy. YES

Indicates a traffic type for service differentiation. Currently, there are

NO
three types of traffic: VIDEO, DOWNLOAD, and OTHER.
Indicates the ID of a prioritized queue. The eNodeB can provide
differentiated services for a maximum of eight prioritized queues. Multiple
NO
DSCPs can be mapped to one queue, but one DSCP cannot be mapped
to multiple queues.

Indicates a guaranteed bit rate for downlink services. The value 0

NO
indicates an invalid rate.

Indicates the maximum bit rate of downlink services. This parameter

must be set to a value greater than 0 if the TrafficType parameter value
is DOWNLOAD. This parameter does not need to be set and the default NO
value 0 takes effect if the TrafficType parameter value is VIDEO or
OTHER.
Indicates the identity of the CA group. It uniquely identifies a CA group
YES
within an eNodeB.

Indicates the type of the carrier aggregation (CA) group. This parameter
will be removed in later versions. In this version, the setting of this
parameter is still synchronized between the U2000 and the eNodeB and NO
can be delivered to the eNodeB, but it is no longer used internally.
Therefore, you are advised to avoid using this parameter.
Indicates the type of the CA group. NO

Indicates the identity of the CA group. It uniquely identifies a CA group

YES
within an eNodeB.

Indicates the local cell ID. It uniquely identifies a cell within an eNodeB. YES
Indicates the ID of the eNodeB serving the cell. YES

Indicates the priority of the cell being treated as a primary serving cell
(PCell). A larger parameter value represents a higher priority level. This
NO
parameter takes effect only when PccAnchorSwitch of the CaAlgoSwitch
parameter is on.
Indicates the reference signal received power (RSRP) threshold for
triggering event A4 during higher-priority cell evaluation for PCell NO
selection in scenarios where CA is configured based on CA groups.

Indicates the reference signal received quality (RSRQ) threshold for

triggering event A4 during higher-priority cell evaluation for PCell
selection in scenarios where CA is configured based on CA groups. If the NO
measured RSRQ of an inter-frequency neighboring cell in the CA group
is greater than this parameter value, the CA UE reports event A4.

Indicates whether the license "Carrier Aggregation for Downlink

3CC(TDD)" is used by the cell specified by the eNodeB ID and Local Cell NO
ID parameters.

Indicates whether the license "Flexible CA from Multiple Carriers(TDD)"

is used by the cell specified by the eNodeB ID and Local Cell ID NO
parameters.
Indicates whether the license "Carrier Aggregation for Downlink
4CC(TDD)" is used by the cell specified by the eNodeB ID and Local Cell NO
ID parameters.

Indicates whether the license "Carrier Aggregation for Uplink 2CC(TDD)"

is used by the cell specified by the eNodeB ID and Local Cell ID NO
parameters.

Indicates whether the license "Downlink Carrier Aggregation(TDD)" is

used by the cell specified by the eNodeB ID and Local Cell ID NO
parameters. This parameter applies only to LTE TDD cells.

Indicates the switch for the algorithm for periodically updating cell IDs. If
this parameter is set to BOOLEAN_TRUE, cell IDs are periodically
updated, inserted into the system information, and broadcast to the NO
associated UEs once the time at which the algorithm begins to take
effect is reached.
Indicates the time at which the algorithm for periodically updating cell IDs
begins to take effect. If the switch for the algorithm is turned on, cell IDs
are periodically updated, inserted into the system information, and NO
broadcast to the associated UEs once the time specified by this
parameter is reached.

Indicates the period of updating cell IDs. NO

Indicates whether to enable CSPC in cells under the centralized control

NO
node in Cloud BB scenarios. This parameter applies only to LTE FDD.

Indicates the reference signal received power (RSRP) used in CSPC,

which can be uplink RSRP or downlink RSRP. The uplink RSRP is
measured based on the uplink sounding reference signal (SRS) NO
measurement, and the downlink RSRP is reported by UEs in event A3 or
A6.This parameter applies only to LTE FDD cells.

Indicates the mode of grouping cells into clusters for CSPC. If this
parameter is set to STATIC_CONFIG, cells must be manually grouped
into clusters for CSPC based on site scenarios. If this parameter is set to
DYNAMIC_PARTITION_CONFIG, the centralized control node NO
periodically groups cells into clusters for CSPC based on site scenarios.
The DYNAMIC_PARTITION_CONFIG value does not take effect
currently.
Indicates the interval at which cells are grouped into clusters for CSPC.
The interval can be configured based on site scenarios. This parameter
NO
currently does not take effect because dynamic clustering is not
supported. This parameter applies only to LTE FDD cells.

Indicates whether the centralized control node performs power

calculation for power optimization. If this parameter is set to ON, the
centralized control node performs power calculation based on
NO
measurement information received from eNodeBs. If this parameter is
set to OFF, the centralized control node does not perform power
calculation after receiving measurement information from eNodeBs.

Indicates the percentage of full-power subframes within one second. NO

Indicates the interval between the time that an eNodeB reports
measurement information to the centralized control node and the time
NO
that the power configuration delivered by the centralized control node
takes effect on the eNodeB.

Indicates the maximum number of UEs that can be selected for CSPC. NO
Indicates the physical resource block (PRB) usage threshold for enabling
coordinated scheduling-based power control (CSPC). CSPC is enabled
when the highest PRB usage among all cells in a CSPC cluster is
greater than this parameter value. To prevent CSPC from being enabled NO
and disabled frequently in the cluster, the PRB usage threshold for
disabling CSPC is lower than this parameter value. This parameter
applies only to LTE FDD.

Indicates whether to enable CSPC in cells under the centralized control

node in Cloud BB scenarios.This parameter applies only to LTE TDD NO
cells.

Indicates the index of the server which allows UEs who gain access to
YES
then be determined as UEs running unlimited services.

Indicates the IP address of the server which allows UEs who gain access
to then be determined as UEs running unlimited services. Server-IP-
address-based unlimited-service-supported UE identification can be
NO
performed based on any of the following method: (1) Server IP address;
(2) Server IP address + server protocol type; (3) Server IP address +
server protocol type + server port number.
Indicates whether to check the port number of the server which allows
UEs who gain access to then be determined as UEs running unlimited
NO
services. The value 0 indicates that the port number of the server that a
UE running unlimited services accesses does not need to be checked.
Indicates whether to check the protocol type of the server which allows
UEs who gain access to then be determined as UEs running unlimited
services. If this parameter is set to None, the eNodeB does not check
the protocol type of downlink packets. If this parameter is set to UDP, the NO
eNodeB checks whether the protocol type of downlink packets is UDP. If
this parameter is set to TCP, the eNodeB checks whether the protocol
type of downlink packets is TCP.

Indicates the downlink (DL) E-UTRA absolute radio frequency channel

number (EARFCN) of the E-UTRAN cell with a specific physical cell YES
identifiers (PCIs).

Indicates the start physical cell identifier (PCI) of E-UTRAN cells with
YES
specific PCIs.
Indicates the number of specific physical cell identifiers (PCIs) of E-
NO
UTRAN cells.

cells to ensure service continuity when the UL signal quality is poor. If

this switch is off, UL-quality-based inter-RAT handovers are disabled.
InterPlmnHoSwitch: If this switch is on, inter-PLMN handovers are
enabled and UEs can be handed over to cells in other PLMNs. If this
switch is off, inter-PLMN handovers are disabled. UtranFlashCsfbSwitch:
This switch takes effect only when UtranCsfbSwitch is on. If
UtranFlashCsfbSwitch is on, flash CSFB to UTRAN is enabled and the
eNodeB sends system information of candidate target UTRAN cells to
UEs during redirections. If UtranFlashCsfbSwitch is off, flash CSFB to
UTRAN is disabled. GeranFlashCsfbSwitch: This switch takes effect only
when GeranCsfbSwitch is on. If GeranFlashCsfbSwitch is on, flash
CSFB to GERAN is enabled and the eNodeB sends system information
of candidate target GERAN cells to UEs during redirections. If
GeranFlashCsfbSwitch is off, flash CSFB to GERAN is disabled.
ServiceBasedInterFreqHoSwitch: If this switch is on, service-based inter-
frequency handovers are enabled and UEs running a specific type of
services can be handed over to inter-frequency cells. If this switch is off,
service-based inter-frequency handovers are disabled.
UlQualityInterFreqHoSwitch: If this switch is on, UL-quality-based inter- NO
frequency handovers are enabled and UEs can be handed over to inter-
frequency cells to ensure service continuity when the UL signal quality is
poor. If this switch is off, UL-quality-based inter-frequency handovers are
disabled. CsfbAdaptiveBlindHoSwitch: This switch takes effect only when
BlindHoSwitch is on. If CsfbAdaptiveBlindHoSwitch is on, adaptive blind
handovers for CSFB are enabled and appropriate handover mechanisms
are selected for UEs based on their locations. If
CsfbAdaptiveBlindHoSwitch is off, adaptive blind handovers for CSFB
are disabled. UtranCsfbSteeringSwitch: If this switch is on, CSFB
steering to UTRAN is enabled and CSFB policies for UEs in idle mode
can be configured. If this switch is off, CSFB steering to UTRAN is
disabled. GeranCsfbSteeringSwitch: If this switch is on, CSFB steering
to GERAN is enabled and CSFB policies for UEs in idle mode can be
configured. If this switch is off, CSFB steering to GERAN is disabled.
CSFBLoadInfoSwitch: If this switch is on, load-based CSFB is enabled
and a target cell for CSFB is selected based on loads of candidate target
cells. If this switch is off, load-based CSFB is disabled.
Cdma1XrttEcsfbSwitch: If this switch is on, eCSFB to CDMA2000 1xRTT
optimized handovers to CDMA2000 HRPD are disabled.
GeranNaccSwitch: This switch does not take effect if GeranCcoSwitch is
off. If this switch is on, the GERAN supports network assisted cell
change (NACC). If this switch is off, the GERAN does not support NACC.
GeranCcoSwitch: If this switch is on, the GERAN supports cell change
order (CCO). If this switch is off, the GERAN does not support CCO.
UtranSrvccSwitch: If this switch is on, the UTRAN supports SRVCC. If
this switch is off, the UTRAN does not support SRVCC.
GeranSrvccSwitch: If this switch is on, the GERAN supports SRVCC. If
this switch is off, the GERAN does not support SRVCC.
Cdma1xRttSrvccSwitch: If this switch is on, the CDMA2000 1xRTT
supports SRVCC. If this switch is off, the CDMA2000 1xRTT does not
support SRVCC.
UtranRedirectSwitch: If this switch is on, redirection to UTRAN is
enabled. If this switch is turned off, redirection to UTRAN is disabled.
GeranRedirectSwitch: If this switch is on, redirection to GERAN is
enabled. If this switch is off, redirection to GERAN is disabled.
CdmaHrpdRedirectSwitch: If this switch is on, redirection to CDMA2000
HRPD is enabled. If this switch is off, redirection to CDMA2000 HRPD is NO
disabled.
Cdma1xRttRedirectSwitch: If this switch is on, redirection to CDMA2000
1xRTT is enabled. If this switch is off, redirection to CDMA2000 1xRTT is
disabled.
BlindHoSwitch: If this switch is on, blind handovers for CSFB are
enabled. If this switch is off, blind handovers for CSFB are disabled. If
both this option and the BlindHoSwitch option of the Handover Mode
switch parameter of the CellHoParaCfg MO are selected, blind CSFB
handovers for CSFB are enabled.
LcsSrvccSwitch: If this switch is on, an SRVCC procedure is triggered
when a UE receives a CSFB instruction during a VoIP service. If this
switch is off, an SRVCC procedure is not triggered when a UE receives a
CSFB instruction during a VoIP service.
AutoGapSwitch: If this switch is on and UEs support automatic
measurement gap configurations on the target frequency, the eNodeB
does not deliver gap configurations to UEs. If this switch is off, the
eNodeB delivers gap configurations to UEs during all inter-frequency and
inter-RAT measurements.
Indicates whether to enable downlink (DL) inter-cell interference
coordination (ICIC) algorithms. This parameter includes the following
switches:
DlIcicSwitch_OFF_ENUM: Indicates that DL ICIC is disabled. NO
DlIcicDynamicSwitch_ON_ENUM: Indicates that dynamic DL ICIC is
enabled.
DlIcicStaticSwitch_ON_ENUM: Indicates that static DL ICIC is enabled.
allowed. If UtranAutonrtDeleteSwitch is off, automatic removal of the
inter-RAT neighbor relationship with UTRAN cells is not allowed.
GeranAutonrtDeleteSwitch: If this switch is on, GeranEventAnrSwitch is
on, and NoRmvFlag of a neighboring GERAN cell is set to
PERMIT_RMV_ENUM, automatic removal of the inter-RAT neighbor
relationship with GERAN cells is allowed. If GeranAutonrtDeleteSwitch is
off, automatic removal of the inter-RAT neighbor relationship with
GERAN cells is not allowed. CdmaAutonrtDeleteSwitch: If this switch is
on, CdmaEventAnrSwitch is on, and NoRmvFlag of a neighboring
CDMA2000 cell is set to PERMIT_RMV_ENUM, automatic removal of
the inter-RAT neighbor relationship with CDMA2000 cells is allowed. If
CdmaAutonrtDeleteSwitch is off, automatic removal of the inter-RAT
neighbor relationship with CDMA2000 cells is not allowed.
ExtendIntraRatAnrSwitch: Indicates whether cells with unknown physical
cell identifiers (PCIs) can be configured as external cells of the eNodeB
by using the eCoordinator. If this switch is on, cells with unknown PCIs
can be configured as external cells of the eNodeB by using the
eCoordinator in any of the following scenarios: (1) When unknown PCIs
are detected by triggering handover events, IntraRatEventAnrSwitch is
NO
off or the UE is incapable of reporting cell global identifications (CGIs).
(2) When unknown PCIs are detected by performing periodic intra-RAT
measurements based on fast ANR, the UE is incapable of reporting
CGIs. If this switch is off, cells with unknown PCIs cannot be configured
as external cells of the eNodeB by using the eCoordinator.
CdmaEventAnrSwitch: If this switch is on, event-triggered ANR with
CDMA2000 is enabled to construct and optimize inter-RAT neighbor
relationships with CDMA2000 cells by triggering events for inter-RAT
handovers to CDMA2000. MlbBasedEventAnrSwitch: Indicates whether
to enable the MLB-based event-triggered ANR. When this switch is on
and IntraRatEventAnrSwitch is on, inter-frequency MLB can be triggered
to construct and optimize inter-frequency neighbor relationships with
intra-RAT cells. When this switch is on and UtranEventAnrSwitch is on,
MLB to UTRAN can be triggered to construct and optimize inter-RAT
neighbor relationships with UTRAN cells. When this switch is on and
GeranEventAnrSwitch is on, MLB to GERAN can be triggered to
construct and optimize inter-RAT neighbor relationships with GERAN
cells. When this switch is off, the neighbor relationship construction and
optimization based on MLB is disabled. IntraRatNoHoSetAnrSwitch:
Indicates the switch used to enable or disable the redirection algorithm.
This switch does not control redirection or fast redirection for CSFB.
GeranFlashRedirectSwitch: If this switch and GeranRedirectSwitch are
on, fast redirection to GERAN can be performed.
NO
UtranFlashRedirectSwitch: If this switch and UtranRedirectSwitch are on,
fast redirection to UTRAN can be performed.
LoadBasedSwitch: If this switch is on, load based redirection can be
performed.
UtranMroSwitch: If this option is selected, the eNodeB can dynamically
adjust the parameters related to inter-RAT handovers to UTRAN to
decrease the number of abnormal handovers from E-UTRAN to UTRAN.
If this option is deselected, the adjustment is not performed.
GeranMroSwitch: If this option is selected, the eNodeB can dynamically
adjust the parameters related to inter-RAT handovers to GERAN to
decrease the number of abnormal handovers from E-UTRAN to GERAN.
If this option is deselected, the adjustment is not performed.
UEMroSwitch: If this option is selected, the eNodeB can dynamically
adjust the UE-level handover parameters to decrease the number of
ping-pong handovers. If this option is deselected, the adjustment is not
performed. In this version, the function of UE-level MRO against ping-
pong handovers takes effect only in intra-frequency handover scenarios.
IntraFreqReselOptSwitch: If this option is selected, the eNodeB
dynamically adjusts intra-frequency cell reselection parameters, which
reduces the number of unnecessary handovers and ensures steady
handover success rate. If this option is deselected, the eNodeB does not
adjust intra-frequency cell reselection parameters.
UtranUnnecHoOptSwitch: If this option is selected, the eNodeB
NO
dynamically adjusts parameters related to inter-RAT handovers to
UTRAN. This adjustment reduces the number of unnecessary handovers
from E-UTRAN to UTRAN, increases the probability that UEs camp in
LTE networks, and improves user experience. If this option is
deselected, the eNodeB does not perform the adjustment. For FDD LTE
cells, the switch of UnnecHoOptWithoutRIM must be off, otherwise, the
adjustment is not performed.
GeranUnnecHoOptSwitch: If this switch is on, the eNodeB dynamically
adjusts parameters about handovers from E-UTRAN to GERAN. This
adjustment reduces unnecessary handovers from E-UTRAN to GERAN,
increases the probability that UEs camp in LTE networks, and improves
user experience. If this switch is off, the eNodeB does not perform the
adjustment. In the current version, this switch applies only to LTE TDD
cells.
IntraRatCallbackSwtich: If this switch is on, after handover parameters
are optimized in intra- or inter-frequency neighboring cells, the eNodeB
monitors the ratio of abnormal handovers within an MRO period for the
neighboring cells. If the ratio increases, the eNodeB rolls back the
parameter settings. If this switch is off, the eNodeB does not perform the

Indicates whether to enable optimization on downlink packet assembly at

the MAC layer when cell loads are unbalanced in heavy traffic scenarios.
NO
The optimization is enabled only when this switch is on. This parameter
applies only to LTE FDD.

Indicates the switch for the TCP Proxy Enhancer (TPE) algorithm. The
TPE algorithm uses ACK splitting to increase the data rate of TCP
services at the initial stage. If this switch is on, the TPE algorithm is NO
enabled and applies only to UEs that newly access or reaccess the
network. If this switch is off, the TPE algorithm is disabled.
Indicates whether to support SPID-based mobility management in
connected mode. If this parameter is set to ON(On), SPID-based mobility
management in connected mode is supported. If this parameter is set to NO
OFF(Off), SPID-based mobility management in connected mode is not
supported.

Indicates the switch used to enable or disable UL ICIC in the frequency

domain. If this switch is set to OFF, UL ICIC in the frequency domain is
disabled in the eNodeB cells. If this switch is set to STATIC, static UL
ICIC in the frequency domain is enabled in the eNodeB cells. If this NO
switch is set to DYNAMIC, dynamic UL ICIC in the frequency domain is
enabled in the eNodeB cells,Dynamic ICIC and static ICIC will not take
effect when the UL adaptive ICIC switch of the cell is turned on.
Indicates the location services (LCS) switch. OtdoaSwitch: If the switch
is on, observed time difference of arrival-based (OTDOA-based)
positioning is enabled. If the switch is off, OTDOA-based positioning is
disabled.EcidInterFreqMeasSwitch: If this option is selected, the function NO
of RSRP and RSRQ measurements of inter-frequency neighboring cells
for E-CID-based positioning is enabled. If this option is deselected, this
function is disabled.
Indicates the switch for uplink flow control over the air interface. If this
switch is on, the scheduling algorithm is notified to limit the uplink data
rate of UEs in the case of uplink congestion. This method prevents uplink
congestion in the eNodeB, but may affect fairness and differentiation for
combined services. If this switch is off, the scheduling algorithm is not
notified and therefore no rate restriction is applied to uplink data from
UEs in the case of uplink congestion. In this case, uplink congestion may
occur in the eNodeB, but fairness and differentiation for combined
services are ensured.
A UE is considered to have combined services if the UE has two or more
flow-controllable non-GBR bearers. Fairness and differentiation for
combined services of a UE are ensured if the uplink scheduling algorithm NO
allocates bandwidths to these flow-controllable non-GBR bearers based
on weighting factors for uplink scheduling priorities (UlschPriorityFactor).
If this switch is on, the scheduling algorithm is notified to limit the number
of resource blocks (RBs) allocated to the UE in the case of uplink
congestion. According to the related specifications, however, the
scheduling algorithm cannot decide how many RBs to be allocated to
each bearer. The number of RBs that each non-GBR bearer can use is
determined based on the prioritized bit rates (PBRs) and priorities of the
associated logical channels rather than based on UlschPriorityFactor. As
a result, if this switch is on, fairness and differentiation for combined
services of a UE may be affected.

Indicates whether to display PCI conflict alarms in the alarm console.

Consider that this parameter is set to on. If
COLLISION_DETECT_SWITCH of the PciConflictDetectSwitch
parameter in the ENodeBAlgoSwitch MO is on and PCI collision occurs,
PCI collision alarms are displayed in the alarm console. If
NO
CONFUSION_DETECT_SWITCH of the PciConflictDetectSwitch
parameter in the ENodeBAlgoSwitch MO is on and PCI confusion
occurs, PCI confusion alarms are displayed in the alarm console. If the
PciConflictAlmSwitch parameter is set to off, PCI conflict alarms are not
displayed in the alarm console.

Indicates the switch used to enable or disable the eNodeB-level energy

conservation function. eNodeB-level energy conservation can be
implemented based on symbol power saving. symbol power saving
applies to LTE-only and LTE Multi-mode base stations. If this function is
enabled, the eNodeB shuts down PAs on the corresponding RF unit
when it detects that OFDM symbols within the subframes do not contain NO
any downlink data to transmit. This reduces static power consumption
and hence conserves energy for the eNodeB. If the symbol saving
applies to LTE Multi-Mode stations, it should cooperate with the energy
saving features of other RAT which share the same resource with LTE to
reduce the ernergy consumption for the Multi-Mode eNodeB.
Indicates the collective switch for the RAN information management
(RIM) function. UTRAN_RIM_SWITCH: Indicates the switch used to
enable or disable the RIM procedure that requests event-driven multiple
reports from UTRAN cells. If this switch is on, the eNodeB can send
RAN-INFORMATION-REQUEST protocol data units (PDUs) to UTRAN
cells to request multiple event-driven reports. If this switch is off, the
eNodeB cannot send RAN-INFORMATION-REQUEST PDUs to UTRAN
NO
cells to request multiple event-driven reports. GERAN_RIM_SWITCH:
Indicates the switch used to enable or disable the RIM procedure that
requests event-driven multiple reports from GERAN cells. If this switch is
on, the eNodeB can send RAN-INFORMATION-REQUEST PDUs to
CERAN cells to request multiple event-driven reports. If this switch is off,
the eNodeB cannot send RAN-INFORMATION-REQUEST PDUs to
GERAN cells to request multiple event-driven reports.

Indicates the ANR algorithm switch in RAN sharing mode. Related

switches are described as follows:
NBSLTEPLMNRoundSwitch: If this switch is on, some neighboring
eNodeBs provide cells that work in RAN sharing mode and broadcast
their PLMN lists in a round robin (RR) manner. In this situation, if
IntraRatEventAnrSwitch or IntraRatFastAnrSwitch is on for the local
eNodeB, the local eNodeB will ask the U2000 for the actual cell global
identifier (CGI) and PLMN list for a cell broadcasting PLMNs in an RR
manner after the UE reports the CGI of the cell during ANR
measurements. If both NBSLTEPLMNRoundSwitch and
NBSLTERANSharingSwitch are on, NBSLTEPLMNRoundSwitch
overrides NBSLTERANSharingSwitch.
NBSLTERANSharingSwitch: If this switch is on, some neighboring
eNodeBs provide cells that work in RAN sharing mode. In this situation,
if IntraRatEventAnrSwitch or IntraRatFastAnrSwitch is on for the local
eNodeB, the local eNodeB will ask the U2000 for the PLMN list for a cell NO
after the UE reports the CGI of the cell during ANR measurements. If the
UE has reported the PLMNlist, the local eNodeB will not ask the U2000
for the PLMN list.
NBSUTRANRANSharingSwitch: If this switch is on, some neighboring
NodeBs provide cells that work in UTRAN sharing mode. In this
situation, if UtranEventAnrSwitch or UtranFastAnrSwitch is on for the
local eNodeB, the local eNodeB will ask the U2000 for the PLMN list for
a cell after the UE reports the CGI of the cell during ANR measurements.
If the UE has reported the PLMNlist, the local eNodeB will not ask the
U2000 for the PLMN list.
NBSGERANRANSharingSwitch: If this switch is on, some neighboring
BTSs provide cells that work in GERAN sharing mode. In this situation, if
GeranEventAnrSwitch or GeranFastAnrSwitch is on for the local
eNodeB, the local eNodeB will ask the U2000 for the PLMN list for a cell
after the UE reports the CGI of the cell during ANR measurements.
This parameter includes the following three switches:
UtranFreqLayerMeasSwitch, UtranFreqLayerBlindSwitch, and
UtranSrvccSwitch. The setting of UtranSrvccSwitch takes effect only
when UtranFreqLayerMeasSwitch is on. If UtranFreqLayerMeasSwitch is
on, the UTRAN hierarchy-based measurement algorithm takes effect for
measurements related to coverage-based and CSFB-triggered
NO
handovers from E-UTRAN to UTRAN. If UtranFreqLayerBlindSwitch is
on, the UTRAN hierarchy-based blind-handover algorithm takes effect for
coverage-based and CSFB-triggered blind handovers from E-UTRAN to
UTRAN. If UtranSrvccSwitch is on, the UTRAN SRVCC hierarchy-based
measurement algorithm takes effect for coverage-based SRVCC-
triggered handovers from E-UTRAN to UTRAN.

Indicates the switch used to enable or disable the eNodeB-level

NO
commercial mobile alert system (CMAS).

Indicates the switch used to enable or disable the voice quality

NO
monitoring algorithm.
Indicates the switch used to enable or disable the preemption based on
the number of users. IntraOpUeNumPreemptSwitch: This parameter
indicates the switch used to enable or disable the intra-operator
preemption based on the number of users. If this switch is on, when a
user cannot access the network because of the user number restriction,
the user can preempt resources of other lower-priority users served by
NO
the same operator. If this switch is off, preemption is not allowed.
InterOpUeNumPreemptSwitch: This parameter indicates the switch used
to enable or disable the inter-operator preemption based on the number
of users. If this switch is on, the inter-operator preemption based on the
number of users is allowed. If this switch is off, the inter-operator
preemption based on the number of users is not allowed.

Indicates the switch used to control whether operators can adopt

different policies. This parameter is a bit-filed-type parameter. By
specifying the bit fields under this parameter, operators can adopt
different policies on the corresponding RAT. UtranSepOpMobilitySwitch
is a switch used to control whether operators can adopt different mobility NO
policies on their UTRANs. If this switch is on, operators can adopt
different policies (for example, PS handover capability and RIM-based
system information reading capability) on their UTRANs. If this switch is
off, operators cannot adopt different policies on their UTRANs.
Indicates whether to enable inter-BBU coordinating algorithms. This
parameter consists of the following switches:
UlJointReceptionOverBBUsSwitch:
Indicates whether to enable uplink coordinated multi-point (UL CoMP)
between cells established on BBPs in different BBUs. This function is
enabled only when this switch is on.
FreqCfgCaOverBBUsSwitch:
Indicates whether to enable inter-BBU carrier aggregation (CA) in
scenarios where CA is configured based on frequencies. Inter-BBU CA is
enabled in the preceding scenarios only when this switch is on. This
switch takes effect only when FreqCfgSwitch of the CaAlgoSwitch
parameter in the ENodeBAlgoSwitch MO is on. Inter-BBU CA is enabled
NO
only when this switch is on.
UlJROverRelaxedBHSw: Indicates whether to enable the relaxed-
backhaul-based inter-BBU coordinating algorithm.
UlJROverRelaxedBHSw:
Indicates whether to enable uplink coordinated multi-point (UL CoMP)
between cells established on BBPs in different BBUs. This function is
enabled only when this switch is on.
UlSfnJROverBBUsSwitch: Indicates whether to enable UL CoMP in inter-
BBU SFN cells.
UlSfnJROverBBUsSwitch:
UL CoMP is enabled in inter-BBU SFN cells only when this switch is on.
This switch applies to LTE TDD only.

Indicates whether to enable operator-customized algorithms.

LcsInterRatMeasSwitch: Indicates the switch used to enable or disable
the eNodeB to respond to the inter-RAT measurement request sent from
the evolved serving mobile location center (E-SMLC). If this switch is on, NO
the eNodeB is allowed to respond to an inter-RAT measurement request
sent from the E-SMLC. If this switch is off, the eNodeB is not allowed to
respond to an inter-RAT measurement request sent from the E-SMLC.
based handovers, the eNodeB delivers A1 measurement configurations
to UEs first, and then delivers A2 measurement configurations to UEs
after receiving event A1 report, reducing signaling overheads in reporting
unnecessary event A2. MultiQciHoExecOptSwitch: Indicates whether
the handover decision is triggered based on the admission result of all
QCIs in SPID-based handovers to HPLMN and frequency-priority-based
handovers. If this switch is on, the handover decision is triggered only
when all QCIs are successfully admitted. If this switch is off, the
handover decision is triggered when any of the QCIs is successfully
admitted. ReduceInvalidFreqPriHoSwitch: Indicates whether to avoid
repeated switches between the frequency-priority-based intra-eNodeB
handover algorithm and the load-based intra-eNodeB handover
algorithm. If this switch is on, the eNodeB evaluates whether to perform
a frequency-priority-based intra-eNodeB handover based on the settings
of InterFreqMlbSwitch of the MlbAlgoSwitch parameter and the load
status on the target cell. If the target cell is heavily loaded, the eNodeB
does not trigger the handover. If this switch is off, the eNodeB evaluates
whether to perform a frequency-priority-based intra-eNodeB handover
without checking the settings of InterFreqMlbSwitch of the
NO
MlbAlgoSwitch parameter on the target cell. AddA2MeasIfQciAdjSwitch:
Indicates whether an eNodeB delivers inter-frequency or inter-RAT A2-
related measurement configuration to the UE when the QCI of services
running on the UE changes in a coverage-based handover. If this switch
is on, the eNodeB performs the following each time the QCI is changed:
(1) Updates the delivered handover-related parameters; (2) Determines
whether inter-frequency or inter-RAT measurement configurations need
to be delivered; (3) Delivers the configurations if they are required and
have not been delivered before, or updates the configurations if they
have been delivered and the current event A2 thresholds for inter-
frequency or inter-RAT measurements are less than or equal to the event
A2 threshold for blind handling. If this switch is off, the eNodeB only
determines whether delivered handover-related parameters need to be
updated each time the QCI is changed. InterFreqHoA2OptSwitch:
Indicates whether to deliver A2-related measurement configurations to
UEs that do not support inter-frequency measurements. A2-related
measurement configurations are not delivered to such UEs when this
switch is on. This switch is off by default. McUtranNcellNumOptSwtich:
Indicates the maximum number of neighboring cells contained in the
capability information.
ApCqiRptAbnormalCtrlSwitch: Indicates whether to apply a compatibility
solution to abnormal aperiodic CQI reporting. If this option is selected,
the compatibility solution takes effect. The configuration IEs related to
aperiodic CQI reporting are always included in RRC Connection
Reconfiguration messages used to reconfigure CQIs regardless of
whether the IEs changed or not. If this option is deselected, the
compatibility solution does not take effect. The configuration IEs related
to aperiodic CQI reporting are not included in RRC Connection
Reconfiguration messages used to reconfigure CQIs if the IEs remain
unchanged.
UeInterRatMeasCtrlSwitch: Indicates whether an eNodeB checks the
QCI-specific inter-RAT handover policies when evaluating an inter-RAT
handover. This function does not allow the eNodeB to deliver inter-RAT
measurement configurations to some special UEs anymore and applies
to the following types of inter-RAT handovers: coverage-based handover,
distance-based handover, uplink-quality-based handover, service-based
handover, and SPID-specific handover back to the HPLMN. If this option
is selected, the eNodeB determines whether to deliver A1/A2, B1, or B2
NO
measurement configurations to the UE for a measurement-based or
blind inter-RAT handover based on the setting of the values of the No
handover flag parameters in the InterRatPolicyCfgGroup MO for QCIs of
services running on the UE. If this option is deselected, the eNodeB
does not perform the determination based on the No handover flag
parameter values.
VoipExProtSwitch: Indicates whether to enable service request-based
inter-frequency handover protection when a VoLTE exception occurs. If
this option is selected and the eNodeB does not support VoLTE, the
eNodeB can set up bearers for QCI-1 services and other services when
both of the following conditions are met: (1) The EPC delivers
information about bearers with QCI 1 and other QCIs. (2) The UE exits
the idle state. After the QCI-1 service bearers are set up, the UE is
handed over to an inter-frequency network. This option is dedicated to
LTE TDD networks.
UeSRSAntSelectCtrlSwitch: Indicates whether to disable antenna
selection during SRS transmission. If this option is selected, antenna
selection is disabled. This option is dedicated to LTE TDD networks.
CaCqiAndAckAbnCtrlSwitch: Indicates whether to enable a workaround
Indicates the switch used to enable or disable neighboring GERAN or
NO
UTRAN cell optimization for blind handovers.

Indicates whether the eNodeB acting as the cluster partition node groups
NO
cells into clusters for CSPC in Cloud BB scenarios.

Indicates whether the RAN information management (RIM) procedure is

initiated by the eCoordinator. If this parameter is set to ON, the RIM
NO
procedure is initiated by the eCoordinator. If this parameter is set to OFF,
the RIM procedure is initiated by the core network.
Indicates whether the VoIP services are enabled in the E-UTRAN cell.
This parameter is used for determining whether the establishment, NO
handover in, admission, and reestablishment of VoIP services is allowed.
when SccA2RmvSwitch is On.
CaTrafficTriggerSwitch: Indicates whether to add and remove an SCC
based on the traffic volume of a CA UE after the UE accesses the
network. This switch is not subject to the settings of FreqCfgSwitch. If
the CarrierMgtSwitch parameter is set to Off and CaTrafficTriggerSwitch
is On, an added SCC cannot be removed based on the traffic volume of
a CA UE.
HoWithSccCfgSwitch: Indicates whether an SCC can be configured for a
CA UE during a handover. It is recommended that the SccA2RmvSwitch
option of the CaAlgoSwitch parameter be selected when the
HoWithSccCfgSwitch option of the same parameter is selected. If the
SccA2RmvSwitch option is deselected, UEs cannot report the signals of
neighboring cells that operate on the frequencies of their SCell, affecting
SCell configuration in handovers. This switch is not subject to the setting
of FreqCfgSwitch of the CaAlgoSwitch parameter. If this switch is On, the
source cell sends SCC information to the target cell during the handover
and the SCC is configured for the CA UE. If this switch is Off, the source
cell does not send SCC information to the target cell during the
handover.
NO
SccModA6Switch: Indicates whether the eNodeB delivers event A6
measurement configurations to a CA UE after configuring an SCC for the
UE. The eNodeB delivers event A6 measurement configurations to a CA
UE after configuring an SCC for the UE only when the switch is On.
GbrAmbrJudgeSwitch: Indicates whether to check the GBR or AMBR
when an SCell is to be activated for downlink CA. If this switch is On, the
bit rate of the bearer or aggregate bit rate of the CA UE is checked when
an SCell is to be activated. An SCell can be activated if the bit rate has
not reached the GBR or the aggregate bit rate of the UE has not reached
the AMBR. If this switch is Off, neither the bit rate of the bearer nor the
aggregate bit rate of the CA UE is checked when an SCell is to be
activated.
MtaAlgSwitch: Indicates whether multiple timing advances (MTAs) are
supported in uplink CA scenarios. This parameter applies only to LTE
FDD. If this switch is On, MTAs are supported. If the reported UE
capabilities indicate that the UE supports MTAs in the uplink, uplink
timing is performed on the UE based on multiple timing advance groups
(TAGs) in uplink CA scenarios. If the UE does not support MTAs in the
uplink, uplink timing is performed on the UE based on a single TAG in
Indicates whether to enable eNodeB-level mobility load balancing.
INTER_FREQ_IDLE_MLB_SWITCH: Indicates whether to enable
eNodeB-level inter-frequency load balancing for UEs in idle mode. If the
INTER_FREQ_IDLE_MLB_SWITCH option of this parameter and the
ADAPTIVE_PROPORTION option of the InterFreqIdleMlbMode
parameter are selected, the eNodeB timely adjusts the proportions of NO
UEs to be released among frequencies based on the current proportions
of UEs in connected mode among frequencies and the preset
proportions of UEs in idle mode among frequencies, ensuring that the
actual proportions of UEs in idle mode among frequencies approach to
the preset proportions.
Indicates whether to enable optimization on handover-related common
configurations and algorithms. This parameter includes the following
switches:
BasedSriGapOptSwitch: Indicates whether to consider transmission of
scheduling request indicators (SRIs) when configuring measurement
gaps for a UE that is not in the discontinuous reception (DRX) state. The
transmission of SRIs is considered in the preceding scenario only when
this switch is on.
L2UBasedHoPolicyPenaltySwitch: Indicates whether the eNodeB
distinguishes PS HO from single radio voice call continuity (SRVCC)
when imposing penalties on UEs after the UEs fail the non-resource-
based admission control in PS HO or SRVCC during inter-operations NO
between the LTE and UMTS. If this switch is on, the eNodeB
distinguishes PS HO from SRVCC when imposing penalties on UEs in
the preceding scenario, and the PS-HO-induced penalty (or SRVCC-
induced penalty) does not affect the initiation of SRVCC (or PS HO)
during the penalty period. If this switch is off, the eNodeB does not
distinguish PS HO from SRVCC when imposing penalties on UEs.
DrxBasedSriGapOptSwitch: Indicates whether to consider transmission
of scheduling request indicators (SRIs) when configuring measurement
gaps for a UE in the discontinuous reception (DRX) state. The
transmission of SRIs is considered in the preceding scenario only when
this switch is on.
Indicates whether to enable network performance optimization when the
network is heavily loaded. This parameter includes the following switch:
SPECSIGRETRANSOPTSWITCH: Indicates whether to optimize special
signaling retransmission. If this switch is ON, the eNodeB adaptively
configures the maximum number of special signaling retransmissions
that can be initiated by the RLC layer based on the number of UEs in the
cell. If this switch is OFF, the eNodeB does not adaptively configure the
maximum number of special signaling retransmissions based on the
number of UEs in the cell.
FlowCtrlTriBackoffSwitch: Indicates whether to enable flow-control-
NO
triggered backoff. Consider that the network is heavily loaded and Msg3
flow control starts. If this option is ON, flow-control-triggered backoff is
enabled, and UEs that fail random accesses are postponed to reinitiate
random access requests, thereby relieving RACH congestion. If this
option is OFF, flow-control-triggered backoff is disabled. During random
access procedures, if flow-control-triggered backoff is required and the
lengths of timers T300 and T301 are too short, the number of initiated
access requests decreases and the access success rate decreases.
Therefore, if this option is on, 2000 ms is recommended for the timers
T300 and T301.
LOADNOTBALANCESCHSWITCH: Indicates whether to enable MAC
scheduling optimization for cells with unbalanced inter-cell or intra-cell
NO
(uplink and downlink) loads in heavy traffic scenarios. The optimization is
enabled only when this switch is on.

Indicates whether PRACH subframes of different cells under an eNodeB

are separated in the time domain. The PRACH subframes of different
cells under an eNodeB are separated in the time domain only when this
parameter is set to ON. This parameter does not apply to the eNodeB
equipped with LBBPc boards nor LTE TDD.
Note that the PRACH subframe configuration is determined based on
both the default PRACH subframe configuration and the
PrachConfigIndexCfgInd parameter. If the PrachConfigIndexCfgInd NO
parameter is set to CFG, the actual PRACH subframe configuration is
specified by the PrachConfigIndex parameter. If the
PrachConfigIndexCfgInd parameter is set to NOT_CFG, the default
PRACH subframe configuration functions as the actual PRACH
subframe configuration. In summary, the PrachTimeStagSwitch
parameter setting has no impact on network performance when the
PrachConfigIndexCfgInd parameter is set to CFG.
Indicates whether cyclic shift (CS) is used in preamble generation in
high-speed mobility scenarios. If this parameter is set to on, CS is used
in preamble generation in high-speed mobility scenarios, and the number
of root sequences required in the cell is relatively small. If this parameter NO
is set to off, CS is not used in preamble generation in high-speed
mobility scenarios, and the number of root sequences required in the cell
is relatively large.

TransDropPktsStatSwitch: Indicates whether to enable collection on

packets dropped during transmission. Collection on packets dropped
during transmission is enabled only when TransDropPktsStatSwitch is
on. If the status of TransDropPktsStatSwitch is changed from off to on, NO
the change applies only to newly accessed UEs. Collection on packets
dropped during transmission is disabled when TransDropPktsStatSwitch
is off.

Indicates whether to enable neighboring cell ranking. This parameter

consists of the following switches: GERAN_SWITCH: Indicates whether
the eNodeB prioritizes measurement priorities of neighboring GERAN
cells based on the number of each neighboring GERAN cell is measured
within a period of time. The eNodeB prioritizes measurement priorities
only when this switch is on. UTRAN_SWITCH: Indicates whether the
NO
eNodeB prioritizes measurement priorities of neighboring UTRAN cells
based on the number of each neighboring UTRAN cell is measured
within a period of time. The eNodeB prioritizes measurement priorities of
neighboring UTRAN cells based on the number of each neighboring
UTRAN cell is measured within a period of time only when this switch is
on.
This parameter is unavailable in this version. NO

Indicates whether to enable load balancing between baseband

processing units (BBPs) in a baseband collaboration group.
L2LoadBalanceSwitch: If this switch is on, lightly-loaded BBPs can share
loads in heavily-loaded BBPs to decrease the CPU usage in the heavily NO
loaded BBPs, thereby avoiding BBP overload. If this switch is off, load
balancing between BBPs is disabled. At present, only the UBBPd can
share loads on the LBBPc.

Indicates whether to enable root sequence conflict detection. If this

parameter is set to ON, the eNodeB checks whether the PRACH root
sequence of the local cell conflict with that of its intra-frequency
neighboring cell. If such a conflict occurs, the alarm about the conflict is
NO
displayed in the alarm console. If this parameter is set to OFF, the
eNodeB does not check whether such a conflict exists, and the alarm
about such conflicts is not displayed in the alarm console even if such a
conflict occurs.
Indicates whether to enable intelligent optimization algorithms. This
parameter includes the following switches: ACHSwitch: If this switch is
on, the eNodeB periodically determines whether to adjust parameters
based on the predefined adaptive parameter adjustment rules and NO
adjusts parameters if the predefined adaptive parameter adjustment
rules are met. Therefore, network performance reaches the optimum in
congestion scenarios.

Indicates whether services in a service group can be transferred to

different E-UTRAN frequencies by service-based handovers. This
parameter applies only to LTE FDD. If this parameter is set to ON,
services in a service group can be transferred to different E-UTRAN NO
frequencies specified in the ServiceIfDlEarfcnGrp MO. If this parameter
is set to OFF, services in a service group can be transferred only to the
frequency with an index of 0.

Indicates whether to enable soft fault self-healing.

BaseBandResetSwitch/RFResetSwitch: If
BaseBandResetSwitch/RFResetSwitch is on, the eNodeB determines
whether a soft failure occurs based on the board self-check result on the
LBBPc/RRU, number of random access messages, and uplink and
downlink throughput. If the fault affects services, the LBBPc/RRU is reset
to recover services. BBPResetDelaySwitch/RFResetDelaySwitch: If NO
BBPResetDelaySwitch/RFResetDelaySwitch is on, the LBBPc/RRU is
reset at 02:00 in the morning to recover services after soft faults are
detected and service exceptions occur. If
BBPResetDelaySwitch/RFResetDelaySwitch is off, the LBBPc/RRU is
reset immediately after soft faults are detected and service exceptions
occur.

Indicates whether the eNodeB performs physical cell identifier (PCI)

conflict checks. COLLISION_DETECT_SWITCH: Indicates whether the
eNodeB check whether PCI collision occurs among cells serving by an
eNodeB or among cells and their external cells. The eNodeB performs
the check only when this switch is on. For details about PCI collision, see
3GPP TR 36.902. CONFUSION_DETECT_SWITCH: Indicates whether NO
the eNodeB check whether PCI confusion occurs among candidate
target cells whose neighbor relationships with the local cell are recorded
in the neighboring relation table (NRT). The eNodeB performs the check
only when this switch is on. For details about PCI confusion, see 3GPP
TR 36.902.
Indicates whether to enable or disable load balancing algorithms in CA
scenarios, The DlCaLbAlgoSwitch check box under this parameter
controls load adjustment among different carriers after the load
balancing algorithm is enabled in downlink CA scenarios. This parameter
NO
applies only to LTE TDD cells.
If the DlCaLbAlgoSwitch check box is on, the load balancing algorithm is
enabled in downlink CA scenarios. If the DlCaLbAlgoSwitch check box is
off, the load balancing algorithm is disabled in downlink CA scenarios.

Indicates whether to advance uplink scheduling. The parameter value

ON(On) is recommended to advance uplink scheduling when the
network is heavily loaded. The parameter value OFF(Off) is NO
recommended not to advance uplink scheduling when the network is
lightly loaded. This parameter applies only to LTE FDD.

This parameter is unavailable in this version. NO

Indicates the mode for eNodeB-level inter-frequency load balancing for
UEs in idle mode.ADAPTIVE_PROPORTION: Indicates whether the
eNodeB adjusts the proportions of UEs in idle mode among frequencies
during eNodeB-level inter-frequency load balancing for UEs in idle
mode.If the ADAPTIVE_PROPORTION option of this parameter and the
INTER_FREQ_IDLE_MLB_SWITCH option of the MlbAlgoSwitch NO
parameter are selected, the eNodeB timely adjusts the proportions of
UEs to be released among frequencies based on the current proportions
of UEs among frequencies and the preset proportions of UEs among
frequencies, ensuring that the proportions of UEs in idle mode among
frequencies approaches to the preset proportions.
Indicates the statistic period within which the eNodeB periodically
collects the average number of uplink synchronized UEs in a cell during
eNodeB-level inter-frequency load pre-balancing. If both
INTER_FREQ_IDLE_MLB_SWITCH of the MlbAlgoSwitch parameter in
the ENodeBAlgoSwitch MO and ADAPTIVE_PROPORTION of the
InterFreqIdleMlbMode parameter in the eNodeBMlb MO are on, the
eNodeB collects the number of uplink synchronized UEs at an interval NO
specified by the InterFreqIdleMlbInterval parameter. At the end of a
measurement period, the eNodeB adaptively adjusts the proportions in
which to-be-released UEs camp on cells operating at different
frequencies. If the InterFreqIdleMlbInterval parameter is set to off, the
eNodeB does not adjust the proportions in which to-be-released UEs
camp on cells operating at different frequencies.
Indicates the threshold for the average number of uplink synchronized
UEs above which the eNodeB adjusts the proportions in which to-be-
released UEs camp on cells operating in different frequencies based on
the actual statistic results during eNodeB-level inter-frequency load pre-
balancing. If both INTER_FREQ_IDLE_MLB_SWITCH of the
MlbAlgoSwitch parameter in the ENodeBAlgoSwitch MO and
ADAPTIVE_PROPORTION of the InterFreqIdleMlbMode parameter in
NO
the eNodeBMlb MO are on, the eNodeB performs periodic statistics on
the average number of uplink synchronized UEs in a cell. If the sum of
the average number of uplink synchronized UEs in all cells is greater
than or equal to this parameter value, the eNodeB updates the
proportion in which to-be-released UEs camp on cells operating in
different frequencies during eNodeB-level inter-frequency load pre-
balancing based on the actual statistic results within the statistic period.
Indicates the maximum number of carriers aggregated for a CA UE
whose load is to be transferred for load balancing. If this parameter is set
to 2CC, load of CA UEs using two component carriers (CCs) can be
NO
transferred for load balancing. If this parameter is set to 3CC, load of CA
UEs using two CCs and three CCs can be transferred for load balancing.
This parameter applies only to LTE TDD cells.

Indicates the minimum data volume ratio between two CCs of a CA UE

whose load is to be transferred. For example, if this parameter is set to
20, the minimum ratio of the data volume on a heavily loaded CC to that
on a lightly loaded CC is 1/5. If this parameter is set to 0, the minimum
NO
ratio of the data volume on a heavily loaded CC to that on a lightly
loaded CC is 0/1, that is, all data on the heavily loaded CC can be
transferred to the lightly loaded CC. This parameter applies only to LTE
TDD cells.

Indicates the proportion of the UL licensed traffic to the total licensed

traffic of the eNodeB. The total licensed traffic is the sum of UL and DL
NO
licensed traffic. If this parameter is set to 100%, there is no DL licensed
traffic, affecting service admission.

Indicates the mode of traffic sharing between the operators in RAN

sharing scenarios. If this parameter is set to SHARING, all the operators
share the total traffic of the eNodeB without proportional limits. If this
parameter is set to DEDICATE and the ENodeBSharingMode parameter NO
is not set to INDEPENDENT, all the operators share the total traffic of the
eNodeB based on specific proportions. However, the vacant traffic of an
operator can be used by other operators.
Indicates the ID of the operator. YES

Indicates the proportion of traffic used by the operator when the eNodeB
is shared among operators. This parameter must be set based on the
NO
contract signed by operators. If this parameter is set to 0, services
except emergency calls of this operator are not admitted.

Indicates the proportion of traffic that the operator can share with other
NO
operators when the eNodeB is shared among operators.

Indicates the period of measurement for MRO. During the period, the
number of handovers is measured and abnormal scenarios (including
premature handover, delayed handover, and ping-pong handover) are NO
identified. After the period elapses, the eNodeB makes a decision on
parameter adjustment.
Indicates the handover success rate threshold for enabling mobility-
related parameter optimization. If the handover success rate is greater
NO
than this parameter value, mobility-related parameters are optimized to
reduce the number of ping-pong handovers.
Indicates the threshold of the number of handovers (including outgoing
handover attempts and delayed handovers) required for enabling
optimization of intra-RAT mobility-related parameters. Optimization of
NO
intra-RAT mobility-related parameters is started when the number of
handovers from the local cell to an intra-RAT neighboring cell reaches
this threshold.
Indicates the time threshold for ping-pong handover. If a UE is handed
over back to the source cell after staying in the target cell for a period
NO
shorter than this threshold, the eNodeB decides that a ping-pong
handover occurs based on the history information about this UE.

Indicates the threshold for the percentage of intra-RAT ping-pong

handovers. If the percentage of intra-RAT ping-pong handovers is
greater than this parameter value, parameters are adjusted to reduce the NO
number of ping-pong handovers. If the percentage is less than or equal
to this parameter value, parameters are not adjusted.
Indicates the threshold for the percentage of coverage-induced abnormal
handovers to all abnormal handovers from the serving cell to a
neighboring cell. If the percentage is greater than or equal to this
NO
threshold when a mobility robustness optimization (MRO) period
approaches its end, the eNodeB does not adjust MRO-related
parameters of the neighboring cell within this period.

Indicates the reference signal received power (RSRP) threshold for the
serving cell. The threshold is used to identify abnormal coverage in a
serving cell. If a UE successfully reestablishes an RRC connection or
reaccess the serving cell after a radio link failure (RLF) or a handover
failure, the UE sends the eNodeB an RLF report, which includes the
NO
RSRP values of the serving cell and neighboring cell. If the RSRP value
of the serving cell is less than this parameter value and the RSRP value
of the neighboring cell is less than the NeighborRsrpThd parameter
value, this RLF or handover failure is induced by abnormal coverage
rather than inappropriate MRO configurations.

Indicates the reference signal received power (RSRP) threshold for

neighboring cells. The threshold is used to identify coverage-induced
abnormal handovers from the serving cell to the neighboring cell. If a UE
successfully reestablishes an RRC connection or reaccess the serving
cell after a radio link failure (RLF) or a handover failure, the UE sends
the eNodeB an RLF report, which includes the RSRP values of the NO
serving cell and neighboring cell. If the RSRP value of the serving cell is
less than the ServingRsrpThd parameter value and the RSRP value of
the neighboring cell is less than this parameter value, this RLF is
induced by abnormal coverage rather than inappropriate MRO
configurations.

Indicates the threshold for the number of pingpong handovers. If the

number of consecutive ping-pong handovers reaches the threshold, the NO
UE is a ping-pong UE.
Indicates the percentage threshold of delayed handovers caused by low
threshold of the event A2 and delayed inter-frequency measurements to
the sum of premature handovers and delayed handovers. If the actual
NO
percentage is greater than this parameter value, the threshold for
triggering inter-frequency event A2 is adjusted by the inter-frequency
MRO.

Indicates the threshold of event A2 rollback triggered by inter-frequency

MRO. If the percentage of too late handovers caused by late inter-
NO
frequency measurement to the sum of too early handovers and too late
handovers is less than the threshold, the event A2 rollback is triggered.

Indicates the mode in which MRO takes effect. If this parameter is set to
FREE, the eNodeB automatically optimizes handover and reselection
parameters. If this parameter is set to CONTROLLED, the eNodeB only
NO
reports the handover or reselection parameters to be optimized to the
U2000, and the U2000 delivers the optimization on handover or cell
reselection parameters after users confirm the optimization.
Indicates the threshold for the inter-RAT handover success rate used to
evaluate MRO against unnecessary inter-RAT handovers. If the inter-
NO
RAT handover success rate is greater than or equal to this parameter
value, this type of MRO is triggered.

Indicates the reference signal received power (RSRP) threshold used to

determine whether an inter-RAT handover is an unnecessary handover.
After an inter-RAT handover, if the RSRP value of the source E-UTRAN
cell measured by the UE in the target cell is consecutively greater than NO
or equal to this parameter value within the specified period of time, the
eNodeB considers that the inter-RAT handover is an unnecessary
handover.
Indicates the minimum value within the range for inter-RAT A2 event
threshold adjustment. In the current version, this parameter applies only NO
to LTE TDD cells.

Indicates the threshold of the number of handovers (including outgoing

handover attempts and delayed handovers) required for enabling
optimization of inter-RAT mobility-related parameters. Optimization of
NO
inter-RAT mobility-related parameters is started when the number of
handovers from the local cell to inter-RAT neighboring cells reaches this
threshold.
Indicates the threshold of the proportion of premature intra-RAT
handovers. If the proportion of the premature intra-RAT handovers is
higher than this threshold and the current cell individual offset (CIO) is
greater than the CIO adjustment threshold, mobility parameters need to
be adjusted. If the proportion of the premature intra-RAT handovers is
less than or equal to this parameter value, mobility parameters do not
NO
need to be adjusted. If both this parameter and the
IntraRatTooLateHoRatioThd parameter are set to 50% or smaller values,
the conditions for optimizing both premature and delayed intra-RAT
handovers may be met. In this case, delayed intra-RAT handovers,
which increase the service drop rate at a higher probability than
premature intra-RAT handovers, are optimized by preference.

Indicates the threshold of the proportion of delayed intra-RAT handovers.

If the proportion of the delayed intra-RAT handovers is higher than this
threshold and the current cell individual offset (CIO) is less than the CIO
adjustment threshold, mobility parameters need to be adjusted. If the
proportion of delayed intra-RAT handovers is less than or equal to this
parameter value, mobility parameters do not need to be adjusted. If both
NO
this parameter and the IntraRatTooEarlyHoRatioThd parameter are set
to 50% or smaller values, the conditions for optimizing both premature
and delayed intra-RAT handovers may be met. In this case, delayed
intra-RAT handovers, which increase the service drop rate at a higher
probability than premature intra-RAT handovers, are optimized by
preference.

Indicates the threshold of the proportion of abnormal intra-RAT

handovers. If the proportion of abnormal handovers is higher than the
threshold, MRO against abnormal intra-RAT handovers is enabled. If the
NO
proportion of the abnormal handovers is lower than or equal to the
threshold, MRO against abnormal intra-RAT handovers is not enabled.
Abnormal handovers include both premature and delayed handovers.

Indicates the number of MRO periods for lowering the reference signal
received power (RSRP) threshold. If the conditions for lowering the
RSRP threshold in inter-frequency A2-related delayed handovers are
NO
met for the consecutive number of MRO periods specified by this
parameter, the RSRP threshold for triggering inter-frequency event A2 is
lowered.
If the time during which a UE camps on a cell after an intra-RAT
handover is less than or equal to this parameter value, the eNodeB
considers that the cell is unstable.
A larger value of parameter results in a higher probability that intra-RAT
MRO determines intra-RAT handovers as premature handovers and
adjusts parameters to reduce the number of premature handovers. This
decreases the number of handovers and the probability of delayed
NO
handovers.
A smaller value of this parameter results in a higher probability that intra-
RAT MRO determines intra-RAT handovers as delayed handovers and
adjusts parameters to reduce the number of delayed handovers. This
increases the number of handovers.
For details, see descriptions of "short time" in "Intra-RAT MRO use case"
in 3GPP TS 36.300.
Indicates the threshold for triggering optimization against abnormal inter-
RAT handovers. If the ratio of abnormal inter-RAT handovers is greater
than or equal to this threshold, the eNodeB determines whether to adjust
mobility parameters. If the ratio of abnormal inter-RAT handovers is less NO
than this threshold, the eNodeB does not determine whether to adjust
mobility parameters. Abnormal handovers include delayed handovers
and premature handovers.
Indicates the percentage threshold of delayed inter-RAT handovers
caused by delayed inter-RAT measurements to the sum of abnormal
inter-RAT handovers (including premature handovers and delayed
NO
handovers). If the actual percentage of delayed A2-related inter-RAT
handovers is greater than this parameter value, optimization on the
threshold for inter-RAT event A2 is triggered.
Indicates the threshold for the percentage of unnecessary inter-RAT
handovers used to evaluate inter-RAT MRO against unnecessary
NO
handovers. If the percentage of unnecessary inter-RAT handovers is
greater than this parameter value, this type of MRO is triggered.
Indicates the measurement time used to determine whether an inter-RAT
handover is an unnecessary handover. After an inter-RAT handover, if
the reference signal received power (RSRP) value of the source E-
UTRAN cell measured by the UE in the target cell is consecutively NO
greater than a preset threshold within the period of time specified by this
parameter, the eNodeB considers that the inter-RAT handover is an
unnecessary handover.

Indicates the index of a simulated load configuration. One BS can store

YES
10 simulated load configurations, which are identified by the indexes.

Indicates the RB usage threshold of a simulated load configuration. If the

RB usage of a cell is below this threshold, the simulated load scheduling NO
is performed.

Indicates the power usage threshold of a simulated load configuration. If

the power usage of a cell is below this threshold, the simulated load NO
scheduling is performed.

Indicates the reporting period for simulated load. The value 0 indicates
NO
that simulated load is not reported.

Indicates the measurement period for simulated load. The value 0

NO
indicates that simulated load is not measured.
Indicates the switch that is used to control whether to enable and disable
the frequency-selective scheduling in simulated load configuration. If the
NO
switch is set to ON, the frequency-selective scheduling is enabled. If the
switch is set to OFF, the frequency-diversity scheduling is used.

Indicates whether to enable or disable the TCP ACK control algorithm. NO

Indicates the maximum downlink throughput in the TCP ACK control

algorithm. If this parameter is set to 0, the downlink throughput in the NO
TCP ACK control algorithm is not under control.
Indicates the timer length for the TCP ACK control algorithm. This timer
can be used to control traffic of the ACKs to uplink TCP packets, NO
therefore preventing traffic bursts in the downlink.

Indicates the switch used to enable or disable the TCP MSS function. If
this switch is turned off, TCP packets are transparently transmitted
NO
without being processed. If this switch is turned on, the value of the MSS
field in each packet for TCP link setups can be modified.

Indicates the threshold for the value of the MSS field in packets for TCP
link setups. If the TCP MSS function is enabled, the eNodeB first checks
the MSS field in each packet for TCP link setups. If the value of the MSS
field is greater than the predefined threshold, the eNodeB changes the NO
value of the MSS field to the predefined threshold. Then, the eNodeB
recalculates the TCP checksum and retransmits the packet with modified
fields. For other packets, the eNodeB transparently transmits them.
Indicates the time delay of the frame start time for all TDD E-UTRAN
NO
cells under the eNodeB to the time of the reference clock.

Indicates the switch for forcibly activating a TDD cell. If this parameter is
set to ON, a TDD cell can be activated when no clock resource is
available. If this parameter is set to OFF, a TDD cell cannot be activated NO
when no clock resource is available. This parameter cannot be set to ON
when there are inter-BBU services because the services will be affected.
Indicates whether to prohibit the eNodeB from setting up a cell or sector
(that is not bound to baseband equipment) on the baseband equipment
that has been bound to another cell or sector. If this parameter is set to
NO
ON and the baseband equipment is bound to a cell or sector, a cell or
sector that is not bound to the baseband equipment cannot be set up on
it.

Indicates the number of ports that enable TCP acceleration. NO

Indicates port 1 to which TPE is to be applied. NO

Indicates port 2 to which TPE is to be applied. NO

Indicates port 3 to which TPE is to be applied. NO

Indicates port 4 to which TPE is to be applied. NO

Indicates port 5 to which TPE is to be applied. NO

Indicates port 6 to which TPE is to be applied. NO

Indicates port 7 to which TPE is to be applied. NO

Indicates port 8 to which TPE is to be applied. NO

Indicates port 9 to which TPE is to be applied. NO

Indicates port 10 to which TPE is to be applied. NO

Indicates port 11 to which TPE is to be applied. NO

Indicates port 12 to which TPE is to be applied. NO

Indicates port 13 to which TPE is to be applied. NO

Indicates port 14 to which TPE is to be applied. NO

Indicates port 15 to which TPE is to be applied. NO

Indicates port 16 to which TPE is to be applied. NO

Indicates port 17 to which TPE is to be applied. NO

Indicates port 18 to which TPE is to be applied. NO

Indicates port 19 to which TPE is to be applied. NO

Indicates port 20 to which TPE is to be applied. NO

Indicates the maximum UL voice packet delay variation allowed on the

Uu interface. If the actual delay variation of a UL voice packet exceeds
this limit, this packet is regarded as lost during the evaluation of voice NO
quality indicator (VQI). The delay variation is measured at the eNodeB
PDCP layer.

Indicates the voice quality indicator (VQI) threshold for determining the
voice quality is good. If the VQI evaluation value is greater than the
VqiGoodThd parameter value and less than or equal to the
VqiExcellentThd parameter value, the voice quality is considered as NO
good. If the VQI evaluation value is less than or equal to the
VqiGoodThd parameter value and greater than the VqiPoorThd
parameter value, the voice quality is considered as accepted.

Indicates the voice quality indicator (VQI) threshold for determining the
voice quality is poor. If the VQI evaluation value is greater than the
VqiBadThd parameter value and less than or equal to the VqiPoorThd
parameter value, the voice quality is considered as poor. If the VQI NO
evaluation value is less than or equal to the VqiGoodThd parameter
value and greater than the VqiPoorThd parameter value, the voice
quality is considered as accepted.

Indicates the voice quality indicator (VQI) threshold equal to or below

NO
which the voice quality is considered as bad.
Indicates the threshold of adaptive multirate wideband (AMR-WB) voice
services that are normally released due to packet loss over the air
interface. Consider that the VQMAlgoSwitch parameter in the
ENodeBAlgoSwitch MO is set to VQM_ALGO_SWITCH_ON. If the NO
packet loss rate in the uplink or downlink over the air interface of the UE
performing an AMR-WB voice service exceeds this threshold, the UE is
regarded to initially hang up the voice service due to poor voice quality.
Indicates the threshold of adaptive multirate narrowband (AMR-NB)
voice services that are normally released due to packet loss over the air
interface. Consider that the VQMAlgoSwitch parameter in the
ENodeBAlgoSwitch MO is set to VQM_ALGO_SWITCH_ON. If the NO
packet loss rate in the uplink or downlink over the air interface of the UE
performing an AMR-NB voice service exceeds this threshold, the UE is
regarded to initially hang up the voice service due to poor voice quality.
Indicates the number of periods that is used to evaluate whether a voice
service is muted due to poor voice quality. If an AMR wideband (AMR-
WB) or AMR narrowband (AMR-NB) voice service performed by a UE is NO
muted in consecutive periods specified by this parameter, the UE is
regarded to normally hang up the voice service.
Indicates the number of periods that is used to evaluate whether a voice
service is released due to poor voice quality. If the voice quality of an
AMR wideband (AMR-WB) or AMR narrowband (AMR-NB) voice service NO
is poor in consecutive periods specified by this parameter, the UE is
regarded to normally hang up the voice service due to poor voice quality.

Indicates the voice quality indicator (VQI) threshold above which the
NO
voice quality is considered as excellent.
Indicates the threshold of adaptive multirate narrowband (AMR-NB)
voice services are muted due to packet loss. Consider that the
VQMAlgoSwitch parameter in the ENodeBAlgoSwitch MO is set to
NO
VQM_ALGO_SWITCH_ON. If the packet loss rate in the uplink or
downlink of the UE performing an AMR-NB voice service exceeds this
threshold, voice mute is regarded to occur during communication.
Indicates the threshold of adaptive multirate wideband (AMR-WB) voice
services that are normally released due to poor voice quality caused by
receive packet loss. Consider that the VQMAlgoSwitch parameter in the
ENodeBAlgoSwitch MO is set to VQM_ALGO_SWITCH_ON. If the NO
packet loss rate in the uplink or downlink of the UE performing an AMR-
WB voice service exceeds this threshold, the UE is regarded to initially
hang up the voice service due to poor voice quality.
Indicates the threshold of adaptive multirate narrowband (AMR-NB)
voice services that are normally released due to poor voice quality
caused by receive packet loss. Consider that the VQMAlgoSwitch
parameter in the ENodeBAlgoSwitch MO is set to
NO
VQM_ALGO_SWITCH_ON. If the packet loss rate in the uplink or
downlink of the UE performing an AMR-NB voice service exceeds this
threshold, the UE is regarded to initially hang up the voice service due to
poor voice quality.
Indicates the threshold of adaptive multirate wideband (AMR-WB) voice
services that are muted due to packet loss. Consider that the
VQMAlgoSwitch parameter in the ENodeBAlgoSwitch MO is set to
NO
VQM_ALGO_SWITCH_ON. If the packet loss rate in the uplink or
downlink of the UE performing an AMR-WB voice service exceeds this
threshold, voice mute is regarded to occur during communication.

Indicates the License Alarm Detect Period. The eNodeB detects license
control items every other interval and reports a license-related alarm if NO
the corresponding reporting condition is met.

Indicates the License Alarm Occur Threshold. A license alarm is

generated if the proportion of the actually used value to the allocated NO
value of the license control item exceeds this threshold.

Indicates the License Alarm Recover Period. During this interval, the
eNodeB detects license control items and clears license alarms if the NO
condition for clearing license alarms is met.

Indicates the License Alarm Recover Threshold. A license alarm is

cleared if the proportion of the actually used value to the allocated value NO
of the license control item is below this threshold.
Indicates reserved 32-bit switch parameter 0 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 1 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 2 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved 32-bit switch parameter 3 that is reserved for future
requirements.
Note on parameter replacement: Reserved parameters are temporarily
NO
used in patch versions and will be replaced with new parameters. For
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 2 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 3 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 4 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 5 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 6 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 7 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 8 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 9 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 10 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 11 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 12 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 13 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 14 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 15 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 16 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 17 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 18 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 19 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 20 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 21 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 22 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 23 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 24 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 25 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 26 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 27 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 28 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 29 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 30 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 31 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 32 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 33 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 34 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 35 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 36 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 37 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 38 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 39 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 40 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 41 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 42 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 43 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 44 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 45 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 46 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 47 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 48 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 49 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 50 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.
Indicates reserved parameter 51 that is reserved for future requirements.
Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 52 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates reserved parameter 53 that is reserved for future requirements.

Note on parameter replacement: Reserved parameters are temporarily
used in patch versions and will be replaced with new parameters. For NO
example, the ID of a new parameter can signify the parameter function.
Therefore, avoid using this parameter.

Indicates the switch for RF module regular time sleep. Cells are
unavailable after the eNodeB enters RF module regular time sleep. After NO
the eNodeB exit RF module regular time sleep, it is in the normal state.

Indicates the time for enter RF module regular time sleep. NO

Indicates the time for exit RF module regular time sleep. NO

Indicates whether the eNodeB is RF module regular time sleep. If this

parameter is RF module regular time sleep mode, all cells are NO
unavailable. If this parameter is normal, the eNodeB runs normally.
Indicates whether an adaptive asynchronization UE is selected when the
adaptive asynchronization function is enabled. If a UE does not transmit
or receive data for a period of time that is longer than the
AdaptUnsyncTimerLen parameter value, the UE is a candidate adaptive NO
asynchronization UE. When this parameter value is larger than or equal
to the UeInactiveTimer parameter value, the adaptive asynchronization
function does not take effect.
Indicates the threshold of the ratio of uplink-synchronized UEs in a cell or
a baseband processing unit. If the ratio of uplink-synchronized UEs in a
cell or a baseband processing unit exceeds this threshold, the eNodeB
adaptively enables some UEs that do not transmit or receive data for a NO
period of time greater than the AdaptUnsyncTimerLen parameter value
to enter the asynchronization state. As a result, PUCCH resources can
be released and used by other UEs.
Indicates the policy for determining whether cells are congested in
intelligent access control or service-based dynamic access control.
If this parameter is set to FLOWCONTROL(FLOWCONTROL), cell
congestion is determined based on the flow control state.
If this parameter is set to CPULOAD(CPULOAD), cell congestion is
NO
determined based on the configured CPU load threshold. If the CPU load
of a main control board or baseband processing unit serving the cells is
greater than or equal to the configured CPU load threshold, the cells are
congested. The CPU load threshold is specified by the CpuLoadThd
parameter.

Indicates the CPU load threshold of a board. If the CPU load of a main
control board or baseband processing unit serving the cells is greater
than or equal to this parameter value, the cells are congested. If the CPU
NO
load is less than this parameter value, the cells are not congested. This
parameter takes effect only when the DynAcBarPolicyMode parameter is
set to CPULOAD(CPULOAD).
 Mandatory Dynamic Attribute Feature ID Feature Name Value Type

YES NO LBFD-002032 Extended-QCI Interval Type

YES NO LBFD-002032 Extended-QCI Interval Type

Service based inter-

LOFD-001043 / RAT handover to
TDLOFD-001043 UTRAN
NO NO Interval Type
LOFD-001046 / Service based inter-
TDLOFD-001046 RAT handover to
GERAN

Service Based
NO NO LBFD-00201805 Inter-frequency Interval Type
Handover

YES NO None None Interval Type

LBFD-00201802 / Coverage Based

NO NO Enumeration Type
TDLBFD-00201802 Inter-frequency
 LBFD-00201802 / Coverage Based
NO NO Enumeration Type
TDLBFD-00201802 Inter-frequency

LBFD-00201802 / Coverage Based

NO NO Interval Type
TDLBFD-00201802 Inter-frequency

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
GERAN

LOFD-001022 / SRVCC to UTRAN /

NO NO Enumeration Type
TDLOFD-001022 SRVCC to UTRAN

LOFD-070210 / Multi Operators

YES NO Interval Type
TDLOFD-001133 SPID Policy
 LOFD-001032 / Intra-LTE Load
TDLOFD-001032 Balancing
LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
LOFD-001054 / Flexible User
YES NO Interval Type
TDLOFD-001054 Steering
LOFD-00105401 / Camp & Handover
TDLOFD-00105401 Based on SPID
LOFD-001059 / UL Pre-allocation
TDLOFD-001059 Based on SPID
LOFD-070210 / Multi Operators
TDLOFD-001133 SPID Policy

LOFD-001032 / Intra-LTE Load

TDLOFD-001032 Balancing
LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Enumeration Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
LOFD-070210 / Multi Operators
TDLOFD-001133 SPID Policy

LOFD-001032 / Intra-LTE Load

TDLOFD-001032 Balancing
LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
LOFD-001054 / Flexible User
NO NO Interval Type
TDLOFD-001054 Steering
LOFD-00105401 / Camp & Handover
TDLOFD-00105401 Based on SPID
LOFD-001059 / UL Pre-allocation
TDLOFD-001059 Based on SPID
LOFD-070210 / Multi Operators
TDLOFD-001133 SPID Policy

YES NO None None Interval Type

YES NO None None Enumeration Type

 Service based inter-
LOFD-001043 / RAT handover to
TDLOFD-001043 UTRAN
NO NO Interval Type
LOFD-001046 / Service based inter-
TDLOFD-001046 RAT handover to
GERAN

Service Based
NO NO LBFD-00201805 Inter-frequency Interval Type
Handover

Service Based
Inter-frequency
Handover
Service based inter-
RAT handover to
TDLBFD-00201805
UTRAN
TDLOFD-001043
NO NO Service based inter- Enumeration Type
TDLOFD-001046
RAT handover to
TDLOFD-070228
GERAN
Service-Request
Based Inter-
frequency
Handover

CS Fallback to
UTRAN
CS Fallback to
LOFD-001033 /
GERAN
TDLOFD-001033
Flash CS Fallback
LOFD-001034 /
to UTRAN
TDLOFD-001034
YES NO Flash CS Fallback Interval Type
TDLOFD-001052
to GERAN
TDLOFD-001053
CS Fallback to
TDLOFD-001035
CDMA2000 1xRTT
TDLOFD-001090
Enhanced CS
Fallback to
CDMA2000 1xRTT
 CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LOFD-001033 /
PS Inter-RAT
TDLOFD-001033
Mobility between E-
LOFD-001034 /
UTRAN and
TDLOFD-001034
GERAN
LOFD-001035 /
PS Inter-RAT
TDLOFD-001035
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
CDMA2000
LOFD-001020 /
NO NO Flash CS Fallback Enumeration Type
TDLOFD-001020
to UTRAN
LOFD-001021
Flash CS Fallback
TDLOFD-001052
to GERAN
TDLOFD-001053
Enhanced CS
TDLOFD-001090
Fallback to
TDLOFD-001043
CDMA2000 1xRTT
TDLOFD-001072
Service based
TDLOFD-001046
Inter-RAT handover
TDLOFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LOFD-001033 /
PS Inter-RAT
TDLOFD-001033
Mobility between E-
LOFD-001034 /
UTRAN and
TDLOFD-001034
GERAN
LOFD-001035 /
PS Inter-RAT
TDLOFD-001035
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
CDMA2000
LOFD-001020 /
NO NO Flash CS Fallback Enumeration Type
TDLOFD-001020
to UTRAN
LOFD-001021
Flash CS Fallback
TDLOFD-001052
to GERAN
TDLOFD-001053
Enhanced CS
TDLOFD-001090
Fallback to
TDLOFD-001043
CDMA2000 1xRTT
TDLOFD-001072
Service based
TDLOFD-001046
Inter-RAT handover
TDLOFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 CS Fallback to
UTRAN
CS Fallback to
GERAN
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LOFD-001033 /
PS Inter-RAT
TDLOFD-001033
Mobility between E-
LOFD-001034 /
UTRAN and
TDLOFD-001034
GERAN
LOFD-001035 /
PS Inter-RAT
TDLOFD-001035
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
CDMA2000
LOFD-001020 /
NO NO Flash CS Fallback Enumeration Type
TDLOFD-001020
to UTRAN
LOFD-001021
Flash CS Fallback
TDLOFD-001052
to GERAN
TDLOFD-001053
Enhanced CS
TDLOFD-001090
Fallback to
TDLOFD-001043
CDMA2000 1xRTT
TDLOFD-001072
Service based
TDLOFD-001046
Inter-RAT handover
TDLOFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

LOFD-001033 / CS Fallback to
NO NO Enumeration Type
TDLOFD-001033 UTRAN

LOFD-001034 / CS Fallback to
NO NO Enumeration Type
TDLOFD-001034 GERAN

LOFD-001035 / CS Fallback to
NO NO Enumeration Type
TDLOFD-001035 CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 CS Fallback
LOFD-001088 / Steering to UTRAN
NO NO TDLOFD-001088 CS Fallback Enumeration Type
LOFD-001089 / Steering to GERAN
TDLOFD-001089 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 CS Fallback
LOFD-001088 / Steering to UTRAN
NO NO TDLOFD-001088 CS Fallback Enumeration Type
LOFD-001089 / Steering to GERAN
TDLOFD-001089 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 CS Fallback
LOFD-001088 / Steering to UTRAN
NO NO TDLOFD-001088 CS Fallback Enumeration Type
LOFD-001089 / Steering to GERAN
TDLOFD-001089 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

LOFD-
001033/TDLOFD- CS Fallback to
001033 UTRAN
NO NO Enumeration Type
LOFD- Flash CS Fallback
001052/TDLOFD- to UTRAN
001052

LOFD-001033 / CS Fallback to
TDLOFD-001033 UTRAN
LOFD-001034 / CS Fallback to
TDLOFD-001034 GERAN
NO NO Bit Field Type
LOFD-001088 / CS Fallback
TDLOFD-001088 Steering to UTRAN
LOFD-001089 / CS Fallback
TDLOFD-001089 Steering to GERAN

LOFD-001088 / CS Fallback
TDLOFD-001088 Steering to UTRAN
NO NO Bit Field Type
LOFD-001089 / CS Fallback
TDLOFD-001089 Steering to GERAN
 LBFD-002023
NO NO Admission Control Enumeration Type
/TDLBFD-002023

LBFD-002023
NO NO Admission Control Interval Type
/TDLBFD-002023

LBFD-002018 / Mobility
YES NO String Type
TDLBFD-002018 Management
 LBFD-002018 / Mobility
YES NO String Type
TDLBFD-002018 Management

LBFD-002018 / Mobility
YES NO Interval Type
TDLBFD-002018 Management

YES NO None None Interval Type

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
LBFD-00201801 /
Handover
TDLBFD-00201801
Distance Based
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
Handover
LBFD-00201804 /
Service Based
TDLBFD-00201804
Inter-frequency
YES NO LBFD-00201805 / String Type
Handover
TDLBFD-00201805
PS Inter-RAT
LOFD-001019 /
Mobility between E-
TDLOFD-001019
UTRAN and
LOFD-001020 /
UTRAN
TDLOFD-001020
PS Inter-RAT
TDLOFD-001033
Mobility between E-
UTRAN and
GERAN
CS Fallback to
UTRAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
LBFD-00201801 /
Handover
TDLBFD-00201801
Distance Based
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
Handover
LBFD-00201804 /
Service Based
TDLBFD-00201804
Inter-frequency
YES NO LBFD-00201805 / String Type
Handover
TDLBFD-00201805
PS Inter-RAT
LOFD-001019 /
Mobility between E-
TDLOFD-001019
UTRAN and
LOFD-001020 /
UTRAN
TDLOFD-001020
PS Inter-RAT
TDLOFD-001033
Mobility between E-
UTRAN and
GERAN
CS Fallback to
UTRAN

LOFD-00105401 / Camp & Handover

YES NO Interval Type
TDLOFD-00105401 Based on SPID

Camp & Handover

Based on SPID
LOFD-00105401 / Enhanced CS
TDLOFD-00105401 Fallback to
YES NO TDLOFD-001090 CDMA2000 1xRTT Enumeration Type
LOFD-001021 / PS Inter-RAT
TDLOFD-001021 Mobility between E-
UTRAN and
CDMA2000

LOFD-00105401 / Camp & Handover

YES NO Interval Type
TDLOFD-00105401 Based on SPID

LOFD-00105401 / Camp & Handover

NO NO Interval Type
TDLOFD-00105401 Based on SPID

LOFD-00105401 / Camp & Handover

NO NO Enumeration Type
TDLOFD-00105401 Based on SPID
 Service Based
Inter-frequency
LBFD-
Handover
00201805/TDLBFD
YES NO Service-Request Interval Type
-00201805
Based Inter-
TDLOFD-070228
frequency
Service
Handover Based
Inter-frequency
LBFD-
Handover
00201805/TDLBFD
YES NO Service-Request Interval Type
-00201805
Based Inter-
TDLOFD-070228
frequency
Service
Handover Based
Inter-frequency
LBFD-
Handover
00201805/TDLBFD
YES NO Service-Request Interval Type
-00201805
Based Inter-
TDLOFD-070228
frequency
Handover

Service Based
Inter-frequency
LBFD-
Handover
00201805/TDLBFD
NO NO Service-Request Interval Type
-00201805
Based Inter-
TDLOFD-070228
frequency
Handover

LBFD- Service Based

NO NO 00201805/TDLBFD Inter-frequency Interval Type
-00201805 Handover

Service Based
YES NO LBFD-00201805 Inter-frequency Interval Type
Handover

Service Based
LBFD-00201805 /
YES NO Inter-frequency Interval Type
TDLBFD-00201805
Handover
 Service Based
LBFD-00201805 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201805
Handover

Service Based
LBFD-00201805 /
NO NO Inter-frequency Interval Type
TDLBFD-00201805
Handover

Service Based
Inter-frequency
Handover
TDLBFD-00201805
NO NO Service-Request Interval Type
TDLOFD-070228
Based Inter-
frequency
Handover
 Service Based
Inter-frequency
Handover
TDLBFD-00201805
NO NO Service-Request Enumeration Type
TDLOFD-070228
Based Inter-
frequency
Handover

Service based inter-

LOFD-001043 / RAT handover to
TDLOFD-001043 UTRAN
YES NO Interval Type
LOFD-001046 / Service based inter-
TDLOFD-001046 RAT handover to
GERAN

Service based inter-

LOFD-001043 / RAT handover to
TDLOFD-001043 UTRAN
YES NO Interval Type
LOFD-001046 / Service based inter-
TDLOFD-001046 RAT handover to
GERAN

Service based inter-

LOFD-001043 / RAT handover to
TDLOFD-001043 UTRAN
NO NO Enumeration Type
LOFD-001046 / Service based inter-
TDLOFD-001046 RAT handover to
GERAN
 Service based inter-
RAT handover to
TDLOFD-001043 UTRAN
NO NO Enumeration Type
TDLOFD-001046 Service based inter-
RAT handover to
GERAN

LOFD-00105401 / Camp & Handover

TDLOFD-00105401 Based on SPID
YES NO Interval Type
LOFD-001059 / UL Pre-allocation
TDLOFD-001059 Based on SPID

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017

LOFD-00105401 / Camp & Handover

NO NO Enumeration Type
TDLOFD-00105401 Based on SPID

LOFD-00105401 / Camp & Handover

NO NO Interval Type
TDLOFD-00105401 Based on SPID

LOFD-001059 / UL Pre-allocation
NO NO Enumeration Type
TDLOFD-001059 Based on SPID

LOFD-00105401 / Camp & Handover

TDLOFD-00105401 Based on SPID
NO NO Enumeration Type
LOFD-001032 / Intra-LTE Load
TDLOFD-001032 Balancing
 LOFD-00105401 / Camp & Handover
TDLOFD-00105401 Based on SPID
LOFD-001044 / Inter-RAT Load
NO NO Enumeration Type
TDLOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

LOFD-00105401 / Camp & Handover

NO NO Enumeration Type
TDLOFD-00105401 Based on SPID

LOFD-00105401 /
YES NO Camp Interval Type
TDLOFD-00105401

LOFD-00105401 /
YES NO Camp Interval Type
TDLOFD-00105401

LOFD-00105401 /
YES NO Camp String Type
TDLOFD-00105401

LOFD-00105401 /
YES NO Camp String Type
TDLOFD-00105401

YES NO None None String Type

YES NO None None String Type

YES NO None None Interval Type

SRVCC to UTRAN
CS Fallback to
LOFD-001022 /
UTRAN
TDLOFD-001022
Flash CS Fallback
LOFD-001033 /
to UTRAN
TDLOFD-001033
CS Fallback with
LOFD-001052 /
LAI to UTRAN
TDLOFD-001052
CS Fallback
LOFD-001068 /
Steering to UTRAN
TDLOFD-001068
PS Inter-RAT
LOFD-001088 /
Mobility between E-
TDLOFD-001088
NO NO UTRAN and Bit Field Type
LOFD-001019 /
UTRAN
TDLOFD-001019
Service based inter-
LOFD-001043 /
RAT handover to
TDLOFD-001043
UTRAN
LOFD-001072 /
Distance based
TDLOFD-001072
Inter-RAT handover
LOFD-081283 /
to UTRAN
TDLOFD-081203
Ultra-Flash CSFB to
LOFD-070202 /
GERAN
TDLOFD-081223
Ultra-Flash CSFB to
UTRAN

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None String Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None String Type

NO NO None None String Type

YES NO None None String Type

YES NO None None IP Address Type

NO NO None None IP Address Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None String Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Enumeration Type

YES NO None None Enumeration Type

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction
 Out of Band Relay
YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

NO NO None None String Type

NO NO None None String Type

Out of Band Relay

NO NO TDLAOFD-080405 Bit Field Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Bit Field Type
introduction

YES NO None None Interval Type

YES NO None None IP Address Type

YES NO None None IP Address Type

YES NO None None Subnet Mask Type

LAOFD-
Out of Band Relay
YES NO 080206/TDLAOFD- Interval Type
introduction
080405

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction
NO YES None None Compound Type

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction

NO YES None None String Type

LAOFD-
Out of Band Relay
NO NO 080206/TDLAOFD- IP Address Type
introduction
080405

NO YES None None Enumeration Type

NO YES None None IP Address Type

NO YES None None Password Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None String Type

NO YES None None String Type

 Out of Band Relay
NO NO TDLAOFD-080405 Enumeration Type
introduction

Out of Band Relay

NO YES TDLAOFD-080405 Enumeration Type
introduction

LAOFD-
Out of Band Relay
YES NO 080206/TDLAOFD- Interval Type
introduction
080405

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Enumeration Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction
 Out of Band Relay
YES NO TDLAOFD-080405 IP Address Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 IP Address Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Enumeration Type
introduction

YES NO None None Password Type

Out of Band Relay

YES NO TDLAOFD-080405 String Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Password Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 String Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction
 Out of Band Relay
NO NO TDLAOFD-080405 Interval Type
introduction

YES NO None None Interval Type

Out of Band Relay

NO NO TDLAOFD-080405 String Type
introduction

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None String Type

NO NO None None Enumeration Type

NO NO None None Interval Type

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Enumeration Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction
 Out of Band Relay
NO NO TDLAOFD-080405 Enumeration Type
introduction
 Out of Band Relay
NO NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction
 Out of Band Relay
NO NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction
 Automatic
NO NO TDLOFD-002001 Neighbour Relation Enumeration Type
(ANR)
 Automatic
NO NO TDLOFD-002001 Neighbour Relation Interval Type
(ANR)

Automatic
NO NO TDLOFD-002001 Neighbour Relation Interval Type
(ANR)
 Automatic
NO NO TDLOFD-002001 Neighbour Relation Enumeration Type
(ANR)
 Automatic
NO NO TDLOFD-002001 Neighbour Relation Interval Type
(ANR)
 Automatic
NO NO TDLOFD-002001 Neighbour Relation Interval Type
(ANR)

LBFD-002004 /
NO NO Integrity Protection Interval Type
TDLBFD-002004
 LBFD-002004 /
NO NO Integrity Protection Interval Type
TDLBFD-002004

LBFD-002004 /
NO NO Integrity Protection Enumeration Type
TDLBFD-002004

LOFD-00101001 /
TDLOFD-00101001 Encryption: AES
LOFD-00101002 / Encryption: SNOW
NO NO Enumeration Type
TDLOFD-00101002 3G
LOFD-00101003 / Encryption: ZUC
TDLOFD-00101003
 LOFD-00101001 /
TDLOFD-00101001 Encryption: AES
LOFD-00101002 / Encryption: SNOW
NO NO Enumeration Type
TDLOFD-00101002 3G
LOFD-00101003 / Encryption: ZUC
TDLOFD-00101003

LOFD-00101001 /
TDLOFD-00101001 Encryption: AES
LOFD-00101002 / Encryption: SNOW
NO NO Enumeration Type
TDLOFD-00101002 3G
LOFD-00101003 / Encryption: ZUC
TDLOFD-00101003

LOFD-00101001 /
TDLOFD-00101001 Encryption: AES
LOFD-00101002 / Encryption: SNOW
NO NO Enumeration Type
TDLOFD-00101002 3G
LOFD-00101003 / Encryption: ZUC
TDLOFD-00101003
NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
 LOFD-002007 / RRC Connection
NO NO Interval Type
TDLOFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
NO NO None None Interval Type

LBFD-002004 /
NO NO Integrity Protection Enumeration Type
TDLBFD-002004

LBFD-002004 /
NO NO Integrity Protection Enumeration Type
TDLBFD-002004
 LBFD-002004 /
NO NO Integrity Protection Enumeration Type
TDLBFD-002004

LBFD-002004 /
NO NO Integrity Protection Enumeration Type
TDLBFD-002004

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None String Type

NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Interval Type

RObust Header
LOFD-001017 /
NO NO Compression Enumeration Type
TDLOFD-001017
(ROHC)

RObust Header
LOFD-001017 /
NO NO Compression Enumeration Type
TDLOFD-001017
(ROHC)
 RObust Header
LOFD-001017 /
NO NO Compression Bit Field Type
TDLOFD-001017
(ROHC)

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Bit Field Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Bit Field Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Bit Field Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Bit Field Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO YES Enumeration Type
00100202 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

 LBFD-002007 / RRC Connection
NO NO Interval Type
TDLBFD-002007 Management
 LBFD-002007 / RRC Connection
NO NO Interval Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
 LOFD-00110501 /
Dynamic DRX
TDLOFD-00110501
NO NO High-Mobility- Interval Type
LOFD-00110502 /
Triggered Idle Mode
TDLOFD-00110502
 LOFD-00110501 /
Dynamic DRX
TDLOFD-00110501
NO NO High-Mobility- Interval Type
LOFD-00110502 /
Triggered Idle Mode
TDLOFD-00110502
 LBFD-002007 / RRC Connection
NO NO Interval Type
TDLBFD-002007 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Interval Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Interval Type
TDLBFD-002008 Management

YES NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None IP Address Type

NO NO None None IP Address Type

NO NO None None Bit Field Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

YES NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LOFD-
YES NO 002004/TDLOFD- Self-configuration String Type
002004

LOFD-
YES NO 002004/TDLOFD- Self-configuration String Type
002004

YES NO None None Interval Type

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Enumeration Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
TDLAOFD-
Flexible CA from
00100111
Multiple Carriers
TDLAOFD-001002
Intra-Band Carrier
TDLAOFD-
Aggregation for
00100102
Downlink 2CC in
TDLAOFD-070201
NO NO 20MHz Interval Type
LAOFD-00100101
Inter-Band Carrier
LAOFD-00100102
Aggregation for
LAOFD-00100201
Downlink 2CC in
LAOFD-00100202
20MHz
LAOFD-070201
Carrier Aggregation
LAOFD-070202
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
TDLAOFD-
Flexible CA from
00100111
Multiple Carriers
TDLAOFD-001002
Intra-Band Carrier
TDLAOFD-
Aggregation for
00100102
Downlink 2CC in
TDLAOFD-070201
NO NO 20MHz Interval Type
LAOFD-00100101
Inter-Band Carrier
LAOFD-00100102
Aggregation for
LAOFD-00100201
Downlink 2CC in
LAOFD-00100202
20MHz
LAOFD-070201
Carrier Aggregation
LAOFD-070202
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
TDLAOFD-
Flexible CA from
00100111
Multiple Carriers
TDLAOFD-001002
Intra-Band Carrier
TDLAOFD-
Aggregation for
00100102
Downlink 2CC in
TDLAOFD-070201
NO NO 20MHz Enumeration Type
LAOFD-00100101
Inter-Band Carrier
LAOFD-00100102
Aggregation for
LAOFD-00100201
Downlink 2CC in
LAOFD-00100202
20MHz
LAOFD-070201
Carrier Aggregation
LAOFD-070202
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
TDLAOFD-
Flexible CA from
00100111
Multiple Carriers
TDLAOFD-001002
Intra-Band Carrier
TDLAOFD-
Aggregation for
00100102
Downlink 2CC in
TDLAOFD-070201
NO NO 20MHz Enumeration Type
LAOFD-00100101
Inter-Band Carrier
LAOFD-00100102
Aggregation for
LAOFD-00100201
Downlink 2CC in
LAOFD-00100202
20MHz
LAOFD-070201
Carrier Aggregation
LAOFD-070202
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
LAOFD-00100101
for Downlink 2CC in
LAOFD-00100102
40MHz
LAOFD-00100201
Support of UE
LAOFD-00100202
Category 6
LAOFD-070201
Flexible CA from
LAOFD-070202
NO NO Multiple Carriers Interval Type
TDLAOFD-
Inter-eNodeB CA
00100111
based on
TDLAOFD-001002
Coordinated BBU
TDLAOFD-
Intra-band Carrier
00100102
Aggregation for
TDLAOFD-070201
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
LAOFD-00100101
for Downlink 2CC in
LAOFD-00100102
40MHz
LAOFD-00100201
Support of UE
LAOFD-00100102
Category 6
LAOFD-070201
Flexible CA from
LAOFD-070202
NO NO Multiple Carriers Interval Type
TDLAOFD-
Inter-eNodeB CA
00100111
based on
TDLAOFD-001002
Coordinated BBU
TDLAOFD-
Intra-band Carrier
00100102
Aggregation for
TDLAOFD-070201
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
Flexible CA from
Multiple Carriers
 FDD+TDD Carrier
Aggregation(LTE
MRFD-101231 TDD)
NO NO Bit Field Type
MRFD-101222 FDD+TDD Carrier
Aggregation(LTE
FDD)

Carrier Aggregation
NO NO LAOFD-080202 Interval Type
for Uplink 2CC
 Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
LAOFD-00100101 Flexible CA from
LAOFD-00100102 Multiple Carriers
LAOFD-00100201 Inter-eNodeB CA
LAOFD-00100102 based on
LAOFD-070201 Coordinated BBU
LAOFD-070202 IP RAN based Inter
LAOFD-080201 Site CA (Carrier
NO NO Interval Type
LAOFD-080202 Aggregation for
LAOFD-080207 2CC based on inter
LAOFD-080208 site)
TDLAOFD- Carrier Aggregation
00100111 for Uplink 2CC
TDLAOFD-001002 Carrier Aggregation
TDLAOFD-070201 for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Flexible CA from
 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support for UE
Category 6
TDLAOFD-
Flexible CA from
00100111
Multiple Carriers
TDLAOFD-001002
Intra-Band Carrier
TDLAOFD-
Aggregation for
00100102
Downlink 2CC in
TDLAOFD-070201
NO NO 20MHz Enumeration Type
LAOFD-00100101
Inter-Band Carrier
LAOFD-00100102
Aggregation for
LAOFD-00100201
Downlink 2CC in
LAOFD-00100202
20MHz
LAOFD-070201
Carrier Aggregation
LAOFD-070202
for Downlink 2CC in
40MHz
Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Support of UE
Category 6
LAOFD-00100101 Flexible CA from
LAOFD-00100102 Multiple Carriers
LAOFD-00100201 Inter-eNodeB CA
LAOFD-00100202 based on
LAOFD-070201 Coordinated BBU
LAOFD-070202 IP RAN based Inter
LAOFD-080201 Site CA (Carrier
NO NO Interval Type
LAOFD-080202 Aggregation for
LAOFD-080207 2CC based on inter
LAOFD-080208 site)
TDLAOFD- Carrier Aggregation
00100111 for Uplink 2CC
TDLAOFD-001002 Carrier Aggregation
TDLAOFD-070201 for Downlink 3CC in
40MHz
Carrier Aggregation
for Downlink 3CC in
60MHz
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Flexible CA from

YES NO None None Interval Type

 DL 2x2 MIMO
TDLOFD-001001 DL 4x2 MIMO
TDLOFD-001003 DL 4x4 MIMO
TDLOFD-001060 Single
TDLOFD-001049 Streaming
TDLOFD-001061 Beamforming
NO NO TDLAOFD- Dual Streaming Enumeration Type
08140114 Beamforming
TDLAOFD- DL 4x2
00100115 MIMO based on
TDLAOFD-081409 TM9
TDLAOFD-081410 DL 8x2 MIMO
based on TM9
 DL 2x2 MIMO
DL 4x2 MIMO
TDLOFD-001001 DL 4x4 MIMO
TDLOFD-001003 Single Streaming
TDLOFD-001060 Beamforming
TDLOFD-001049 Dual Streaming
TDLOFD-001061 Beamforming
NO NO TDLAOFD- DL 4x2 MIMO Enumeration Type
08140114 based on TM9
TDLAOFD- DL 8x2 MIMO
00100115 based on TM9
TDLAOFD-081409 DL 4x4 MIMO
TDLAOFD-081410 based on TM9
DL 8x4 MIMO
based on TM9
 DL 2x2 MIMO
TDLOFD-001001 DL 4x4 MIMO
TDLOFD-001060 Single Streaming
NO NO Enumeration Type
TDLOFD-001049 Beamforming
TDLOFD-001061 Dual Streaming
Beamforming
 Single Streaming
TDLOFD-
Beamforming/Dual
NO NO 001049/TDLOFD- Interval Type
Streaming
001061
Beamforming
 DL 2x2 MIMO
TDLOFD-001001
DL 4x4 MIMO
NO NO TDLOFD-001060 Interval Type
Dual streaming
TDLOFD-001061
Beamforming
NO NO None None Interval Type
 DL 2x2 MIMO
TDLOFD-001001
DL 4x4 MIMO
NO NO TDLOFD-001060 Interval Type
Dual streaming
TDLOFD-001061
Beamforming
 DL 2x2 MIMO
TDLOFD-001001
DL 4x4 MIMO
NO NO TDLOFD-001060 Interval Type
Dual streaming
TDLOFD-001061
Beamforming
NO NO None None Interval Type
 Single Streaming
TDLOFD-001049 Beamforming
NO NO Interval Type
TDLOFD-001061 Dual Streaming
Beamforming
 Single Streaming
TDLOFD-001049 Beamforming
NO NO Interval Type
TDLOFD-001061 Dual Streaming
Beamforming

DL 2x2 MIMO
TDLOFD-001001
DL 4x4 MIMO
NO NO TDLOFD-001060 Enumeration Type
Dual streaming
TDLOFD-001061
Beamforming
 DL 2x2 MIMO
TDLOFD-001001
DL 4x4 MIMO
NO NO TDLOFD-001060 Enumeration Type
Dual streaming
TDLOFD-001061
Beamforming

Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
TDLAOFD- for Downlink 2CC in
00100111 40MHz
TDLAOFD-001002 Support for UE
TDLAOFD- Category 6
NO NO 00100202 Flexible CA from Enumeration Type
TDLAOFD-070201 Multiple Carriers
TDLAOFD-081405 Carrier Aggregation
TDLAOFD-081406 for Downlink 3CC
TDLAOFD-081407 TDLAOFD-081406
CA for Downlink
3CC from Multiple
Carriers
Carrier Aggregation
for Uplink 2CC
 DL 2x2 MIMO
TDLOFD-001001 DL 4x4 MIMO
TDLOFD-001060 Single Streaming
NO NO Interval Type
TDLOFD-001049 Beamforming
TDLOFD-001061 Dual streaming
Beamforming

YES NO None None Interval Type

 Basic Scheduling
Dynamic
LBFD-002025
Scheduling
LOFD-00101502
NO NO Single Streaming Enumeration Type
TDLOFD-001049
Beamforming
TDLOFD-001061
Dual Streaming
Beamforming

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502
 LBFD-001006 /
AMC
TDLBFD-001006
CQI Adjustment
LOFD-00101501 /
Enhanced
NO NO TDLOFD-00101501 Enumeration Type
Scheduling
TDLOFD-001015
Physical Channel
LBFD-002003 /
Management
TDLBFD-002003

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502

YES NO None None Interval Type

 DL CoMP
Introduction
Package
TDLOFD-001136
Intra-eNodeB DL
TDLAOFD-
NO NO CoMP in DCS Interval Type
00100103
Mode
TDLAOFD-003002
Intra-eNodeB DL
CoMP in Adaptive
Mode

YES NO None None Interval Type

LBFD-002016 / Dynamic Downlink

NO NO Enumeration Type
TDLBFD-002016 Power Allocation
 LBFD-002016 / Dynamic Downlink
NO NO Enumeration Type
TDLBFD-002016 Power Allocation

YES NO None None Interval Type

LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

NO NO TDLBFD-002017 DRX Interval Type

NO NO TDLBFD-002017 DRX Interval Type

NO NO TDLBFD-002017 DRX Interval Type

NO NO TDLBFD-002017 DRX Interval Type

LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LOFD-001105 Dynamic DRX

NO NO Enumeration Type
TDLBFD-002017 DRX
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LOFD-00110501 /
Dynamic DRX
TDLOFD-00110501
NO NO High-Mobility- Enumeration Type
LOFD-00110502 /
Triggered Idle Mode
TDLOFD-00110502
 LOFD-001105 /
NO NO Dynamic DRX Enumeration Type
TDLOFD-001105

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
NO NO LBFD-002017 DRX Enumeration Type

NO NO LBFD-002017 DRX Enumeration Type

 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN

LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Enumeration Type
TDLOFD-081203 Fallback to GERAN
 LOFD-081283 / Ultra-Flash CS
NO NO Interval Type
TDLOFD-081203 Fallback to GERAN
 TDLBFD-002017 DRX
NO NO TDLOFD-00110501 Dynamic DRX Enumeration Type
TDLBFD-070112 Smart DRX

TDLBFD-002017 DRX
NO NO TDLOFD-00110501 Dynamic DRX Enumeration Type
TDLBFD-070112 Smart DRX
 SRVCC to GERAN
LOFD-001023 /
CS Fallback to
TDLOFD-001023
GERAN
LOFD-001034 /
Flash CS Fallback
TDLOFD-001034
to GERAN
LOFD-001053 /
Flash CS Fallback
TDLOFD-001053
NO NO to GERAN Enumeration Type
LOFD-081283 /
Ultra-Flash CS
TDLOFD-081203
Fallback to GERAN
LOFD-001020 /
PS Inter-RAT
TDLOFD-001020
Mobility between E-
LOFD-001046 /
UTRAN and
TDLOFD-001046
GERAN

SRVCC to GERAN
TDLOFD-001023 /
PS Inter-RAT
LOFD-001023
NO NO Mobility between E- Enumeration Type
TDLOFD-001020 /
UTRAN and
LOFD-001020
GERAN

YES NO None None Interval Type

 Coverage Based
Inter-frequency
Handover
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
UTRAN
TDLOFD-001019
NO NO PS Inter-RAT Interval Type
LOFD-001020 /
Mobility between E-
TDLOFD-001020
UTRAN and
LOFD-001021 /
GERAN
TDLOFD-001021
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
 Coverage Based
Inter-frequency
Handover
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
UTRAN
TDLOFD-001019
NO NO PS Inter-RAT Interval Type
LOFD-001020 /
Mobility between E-
TDLOFD-001020
UTRAN and
LOFD-001021 /
GERAN
TDLOFD-001021
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000

Handover
Enhancement at
LOFD-081228
Speed Mobility
NO NO LBFD-080205 / Interval Type
Handover
TDLOFD-080205
Enhancement at
Speed Mobility
CS Fallback to
UTRAN / CS
LOFD-001033 /
Fallback to
LOFD-001034 /
NO NO GERAN / CS Bit Field Type
TDLOFD-001033 /
Fallback to
TDLOFD-001034
UTRAN / CS
Fallback to GERAN

LOFD-001022 / SRVCC to UTRAN /

NO NO Bit Field Type
TDLOFD-001022 SRVCC to UTRAN
NO NO None None Interval Type

NO NO None None Interval Type

Handover
NO NO TDLOFD-080205 Enhancement at Enumeration Type
Speed Mobility

Handover
NO NO TDLOFD-080205 Enhancement at Interval Type
Speed Mobility
 LOFD-001033 / CS Fallback to
NO NO Enumeration Type
TDLOFD-001033 UTRAN

LOFD-001033 / CS Fallback to
NO NO Interval Type
TDLOFD-001033 UTRAN

YES NO None None Interval Type

 LOFD-001001
DL 2x2 MIMO
LOFD-001003
DL 4x2 MIMO
NO NO LOFD-001060 / Enumeration Type
DL 4X4 MIMO
TDLOFD-001060
DL 2x2 MIMO
TDLOFD-001001
 LOFD-001001
DL 2x2 MIMO
LOFD-001003
DL 4x2 MIMO
NO NO LOFD-001060 / Enumeration Type
DL 4X4 MIMO
TDLOFD-001060
DL 2x2 MIMO
TDLOFD-001001
 LOFD-001001 /
TDLOFD-001001 DL 2x2 MIMO
NO NO LOFD-001003 DL 4x2 MIMO Enumeration Type
LOFD-001060 / DL 4X4 MIMO
TDLOFD-001060

YES NO None None Interval Type

 Intra-LTE User
NO NO TDLOFD-070215 Number Load Enumeration Type
Balancing
 Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Bit Field Type
TDLOFD-070215
Number Load
Balancing
 Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Interval Type
TDLOFD-070215
Number Load
Balancing

Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Interval Type
TDLOFD-070215
Number Load
Balancing
 Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Interval Type
TDLOFD-070215
Number Load
Balancing

Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Interval Type
TDLOFD-070215
Number Load
Balancing
 Intra-LTE Load
Balancing
TDLOFD-001032
NO NO Intra-LTE User Interval Type
TDLOFD-070215
Number Load
Balancing

LOFD-
Inter-RAT Load
NO NO 001044/TDLOFD- Bit Field Type
Sharing to UTRAN
001044

YES NO None None Interval Type

YES NO None None Interval Type

 LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

YES NO None None Interval Type

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management

YES NO None None Interval Type

 Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
LBFD-00201802 /
Service Based
TDLBFD-00201802
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Mobility between
LBFD-00201805 /
LTE TDD and LTE
TDLBFD-00201805
FDD
TDLOFD-001050
PS Inter-RAT
LOFD-001019 /
Mobility between E-
TDLOFD-001019
UTRAN and
LOFD-001022 /
UTRAN
TDLOFD-001022
SRVCC to UTRAN
LOFD-001043 /
Service based
TDLOFD-001043
Inter-RAT handover
NO NO LOFD-001072 / Interval Type
to UTRAN
TDLOFD-001072
Distance based
LOFD-001033 /
Inter-RAT handover
TDLOFD-001033
to UTRAN
LOFD-001020 /
CS Fallback to
TDLOFD-001020
UTRAN
LOFD-001023 /
PS Inter-RAT
TDLOFD-001023
Mobility between E-
LOFD-001046 /
UTRAN and
TDLOFD-001046
GERAN
LOFD-001073 /
SRVCC to GERAN
TDLOFD-001073
Service based inter-
LOFD-001034 /
RAT handover to
TDLOFD-001034
GERAN
Distance based
inter-RAT handover
to GERAN
CS Fallback to
GERAN
 Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Distance Based
TDLBFD-00201802
Inter-frequency
LBFD-00201804 /
Handover
NO NO TDLBFD-00201804 Interval Type
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD
 Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Distance Based
TDLBFD-00201802
Inter-frequency
LBFD-00201804 /
Handover
NO NO TDLBFD-00201804 Interval Type
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD
 PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
UTRAN
LOFD-001022 /
SRVCC to UTRAN
TDLOFD-001022
Service based
LOFD-001043 /
NO NO Inter-RAT handover Interval Type
TDLOFD-001043
to UTRAN
LOFD-001072 /
Distance based
TDLOFD-001072
Inter-RAT handover
LOFD-001033 /
to UTRAN
TDLOFD-001033
CS Fallback to
UTRAN
 PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
UTRAN
LOFD-001022 /
SRVCC to UTRAN
TDLOFD-001022
Service based
LOFD-001043 /
NO NO Inter-RAT handover Interval Type
TDLOFD-001043
to UTRAN
LOFD-001072 /
Distance based
TDLOFD-001072
Inter-RAT handover
LOFD-001033 /
to UTRAN
TDLOFD-001033
CS Fallback to
UTRAN
 PS Inter-RAT
Mobility between E-
LOFD-001020 /
UTRAN and
TDLOFD-001020
GERAN
LOFD-001023 /
SRVCC to GERAN
TDLOFD-001023
Service based inter-
LOFD-001046 /
NO NO RAT handover to Interval Type
TDLOFD-001046
GERAN
LOFD-001073 /
Distance based
TDLOFD-001073
inter-RAT handover
LOFD-001034 /
to GERAN
TDLOFD-001034
CS Fallback to
GERAN

YES NO None None Interval Type

 LOFD-001066 / Intra-eNodeB UL
NO NO Interval Type
TDLOFD-001066 CoMP

LOFD-003029 /
SFN
TDLOFD-001075
NO NO Adaptive Interval Type
LOFD-070205 /
SFN/SDMA
TDLOFD-002008
 UL CoMP based on
NO NO LOFD-081219 Interval Type
relaxed backhaul

YES NO None None Interval Type

LBFD-002026 / Uplink Power

NO NO Enumeration Type
TDLBFD-002026 Control
 LBFD-002026 / Uplink Power
NO NO Interval Type
TDLBFD-002026 Control

LBFD-002026 / Uplink Power

NO NO Interval Type
TDLBFD-002026 Control
 LBFD-002026 / Uplink Power
NO NO Enumeration Type
TDLBFD-002026 Control

YES NO None None Interval Type

Distance based
Inter-RAT handover
LOFD-001072 /
to UTRAN
TDLOFD-001072
Distance based
LOFD-001073 /
NO NO Inter-RAT handover Bit Field Type
TDLOFD-001073
to GERAN
LBFD-00201804 /
Distance Based
TDLBFD-00201804
Inter-frequency
Handover
 Distance Based
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Distance based
LOFD-001072 /
NO NO Inter-RAT handover Interval Type
TDLOFD-001072
to UTRAN
LOFD-001073 /
Distance based
TDLOFD-001073
Inter-RAT handover
to GERAN

YES NO None None Interval Type

LBFD-002017 /
YES NO DRX Interval Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

YES NO None None Interval Type

GSM and LTE

YES NO MRFD-231808 Bufferzone Interval Type
Optimization

GSM and LTE

NO NO MRFD-231808 Bufferzone Enumeration Type
Optimization

YES NO None None Interval Type

 PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
YES NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
 PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Enumeration Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
 PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
 PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
GERAN
 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN
YES NO None None Interval Type

YES NO None None Interval Type

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT
NO NO None None Interval Type

Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

YES NO None None Interval Type

LBFD-002007 / RRC Connection

YES NO Interval Type
TDLBFD-002007 Management
 LBFD-002007 / RRC Connection
NO NO Enumeration Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management
 LBFD-002007 / RRC Connection
NO NO Enumeration Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management

YES NO LBFD-002032 Extended-QCI Interval Type

YES NO None None Interval Type

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Interval Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
CS Fallback to
CDMA2000 1xRTT
LOFD-001035 PS Inter-RAT
NO NO Interval Type
LOFD-001021 Mobility between E-
UTRAN and
CDMA2000
 PS Inter-RAT
Mobility between E-
NO NO LOFD-001021 Interval Type
UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
GERAN
PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN

Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Interval Type
TDLBFD-00201801
Handover

LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
 LBFD-002008 / Radio Bearer
NO NO Interval Type
TDLBFD-002008 Management

YES NO None None Interval Type

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
YES NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Interval Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 PS Inter-RAT
NO NO Interval Type
LOFD-001021 / Mobility between E-
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000
PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO TDLOFD-001020 UTRAN and Interval Type
TDLOFD-001023 GERAN
SRVCC to GERAN
PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN
Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Interval Type
TDLBFD-00201801
Handover

LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management
 LBFD-002007 / RRC Connection
NO NO Interval Type
TDLBFD-002007 Management

LBFD-002008 / Radio Bearer

NO NO Interval Type
TDLBFD-002008 Management

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
LBFD-00201801 Distance Based
LBFD-00201802 Inter-frequency
LBFD-00201804 Handover
NO NO Interval Type
LBFD-00201805 Service Based
LOFD-001072 Inter-frequency
LOFD-001073 Handover
Distance based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to GERAN

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

Intra-LTE Load
NO NO TDLOFD-001032 Bit Field Type
Balancing

YES NO None None Interval Type

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000
 LOFD-001035 / CS Fallback to
NO NO Interval Type
TDLOFD-001035 CDMA2000 1xRTT

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000
YES NO None None Interval Type

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO TDLOFD-001020 UTRAN and Interval Type
TDLOFD-001023 GERAN
SRVCC to GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO TDLOFD-001020 UTRAN and Interval Type
TDLOFD-001023 GERAN
SRVCC to GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Interval Type
TDLOFD-001020 UTRAN and
GERAN
 PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO TDLOFD-001020 UTRAN and Enumeration Type
TDLOFD-001023 GERAN
SRVCC to GERAN

Service based inter-

LOFD-001046 /
NO NO RAT handover to Interval Type
TDLOFD-001046
GERAN

YES NO None None Interval Type

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO TDLOFD-001019 UTRAN and Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN
 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Enumeration Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN
 Service based inter-
LOFD-001043 RAT handover to
NO NO Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN

Service based inter-

LOFD-001043 RAT handover to
NO NO Interval Type
TDLOFD-001022 UTRAN
SRVCC to UTRAN
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Enumeration Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Interval Type

 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201802
Handover
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Interval Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO Interval Type
LBFD-00201804 / Distance Based
TDLBFD-00201804 Inter-frequency
Handover
 Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO Interval Type
LBFD-00201804 / Distance Based
TDLBFD-00201804 Inter-frequency
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Service Based
LBFD-00201805 /
NO NO Inter-frequency Interval Type
TDLBFD-00201805
Handover
 Service Based
LBFD-00201805 /
NO NO Inter-frequency Interval Type
TDLBFD-00201805
Handover

NO NO None None Interval Type

NO NO None None Interval Type

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

NO NO None None Interval Type

NO NO None None Interval Type

 Enhanced Intra-LTE
NO NO TDLOFD-001033 Interval Type
Load Balancing

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Service-Request
Based Inter-
NO NO TDLOFD-070228 Interval Type
frequency
Handover
 Service-Request
Based Inter-
NO NO TDLOFD-070228 Interval Type
frequency
Handover
 Intra-LTE Load
Balancing
LOFD-001032 /
Intra-LTE User
TDLOFD-001032
Number Load
NO NO LOFD-070215 / Interval Type
Balancing
TDLOFD-070215
Operator Load
LOFD-070204
Based Intra-LTE
MLB
 Intra-LTE Load
Balancing
LOFD-001032 /
Intra-LTE User
TDLOFD-001032
Number Load
NO NO LOFD-070215 / Interval Type
Balancing
TDLOFD-070215
Operator Load
LOFD-070204
Based Intra-LTE
MLB
NO NO None None Interval Type

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 Uplink heavy traffic-
NO NO TDLOFD-081236 Interval Type
based MLB

Uplink heavy traffic-

NO NO TDLOFD-081236 Interval Type
based MLB

YES NO None None Interval Type

YES NO None None Interval Type

 Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Interval Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Interval Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Enumeration Type
TDLBFD-00201801
Handover
YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None Bit Field Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

RAN Sharing with

Common Carrier
RAN Sharing with
LOFD-001036 Dedicated Carrier
LOFD-001037 RAN Sharing by
YES NO LOFD-001086 More Operators Interval Type
TDLOFD-001112 MOCN Flexible
LOFD-070206 Priority Based
Camping
Hybrid RAN
Sharing
 RAN Sharing with
Common Carrier
LOFD-001036 /
RAN Sharing with
TDLOFD-001036
Dedicated Carrier
LOFD-001037 /
RAN Sharing by
TDLOFD-001037
YES NO More Operators String Type
LOFD-001086 /
MOCN Flexible
TDLOFD-001086
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
LOFD-001036 /
RAN Sharing with
TDLOFD-001036
Dedicated Carrier
LOFD-001037 /
RAN Sharing by
TDLOFD-001037
YES NO More Operators Enumeration Type
LOFD-001086 /
MOCN Flexible
TDLOFD-001086
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
LOFD-001036 /
RAN Sharing with
TDLOFD-001036
Dedicated Carrier
LOFD-001037 /
RAN Sharing by
TDLOFD-001037
YES NO More Operators String Type
LOFD-001086 /
MOCN Flexible
TDLOFD-001086
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
LOFD-001036 /
RAN Sharing with
TDLOFD-001036
Dedicated Carrier
LOFD-001037 /
RAN Sharing by
TDLOFD-001037
YES NO More Operators String Type
LOFD-001086 /
MOCN Flexible
TDLOFD-001086
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

YES NO None None Interval Type

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing
 RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing
RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

Hybrid RAN
YES NO LOFD-070206 Interval Type
Sharing

Hybrid RAN
YES NO LOFD-070206 Interval Type
Sharing

Hybrid RAN SecondaryOpIdTyp

YES NO LOFD-070206
Sharing e[]

Hybrid RAN
YES NO LOFD-070206 Interval Type
Sharing
 LOFD-001036 / RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LBFD-002028 /
NO NO Emergency Call Enumeration Type
TDLBFD-002028
 LBFD-002028 /
NO NO Emergency Call Enumeration Type
TDLBFD-002028
 LBFD-002028 /
NO NO Emergency Call Interval Type
TDLBFD-002028
 LBFD-002028 /
NO NO Emergency Call Interval Type
TDLBFD-002028

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
NO NO LOFD-001037 / Enumeration Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

NO NO None None Enumeration Type

NO NO None None Enumeration Type

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502

NO NO None None Enumeration Type

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Interval Type

 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLBFD-002001
(ANR)

NO NO None None Enumeration Type

 PS Inter-RAT
Mobility between E-
NO NO LOFD-001019 Enumeration Type
UTRAN and
UTRAN
 LOFD-001018 /
NO NO S1-Flex Enumeration Type
TDLOFD-001018

NO NO None None Enumeration Type

LBFD-002018 / Mobility
NO NO Enumeration Type
TDLBFD-002018 Management
 SRVCC Handover
LOFD-001023 to GERAN
NO NO Bit Field Type
TDLOFD-001023 SRVCC Handover
to GERAN
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)

NO NO None None Enumeration Type

NO NO None None Enumeration Type

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management
 LBFD-002007 / RRC Connection
NO NO Enumeration Type
TDLBFD-002007 Management

LBFD-002007 / RRC Connection

NO NO Enumeration Type
TDLBFD-002007 Management
 LBFD-002011 /
NO NO Paging Enumeration Type
TDLBFD-002011

LBFD-002026 Uplink Power

NO NO Enumeration Type
/TDLBFD-002026 Control
 RIM Based LTE
Target Cell
Selection
LOFD-070203 Intelligent WiFi
NO NO SEFD-090205 Detection and Bit Field Type
SEFD-090206 Selection-LTE FDD
Intelligent WiFi
Detection and
Selection-LTE TDD

NO NO None None Bit Field Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

LOFD-001018 /
NO NO S1-Flex Bit Field Type
TLOFD-001018

NO NO None None Enumeration Type

 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101
Downlink 2CC in
LAOFD-00100102
20MHz
LAOFD-00100201 /
Carrier Aggregation
TDLAOFD-001002
for Downlink 2CC in
LAOFD-00100202 /
40MHz
TDLAOFD-
Support of UE
NO NO 00100202 Bit Field Type
Category 6
LAOFD-070201 /
Flexible CA from
TDLAOFD-070201
Multiple Carriers
LAOFD-070202
Inter-eNodeB CA
TDLAOFD-
based on
00100111
Coordinated BBU
TDLBFD-002003
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
(Physical Channel
Management)

NO NO None None Enumeration Type

 Automatic
LOFD-002001 /
NO NO Neighbour Relation Bit Field Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
Neighbour Relation
LOFD-002001 /
(ANR)
TDLOFD-002001
Inter-RAT ANR
LOFD-002002 /
PCI Collision
NO NO TDLOFD-002002 Enumeration Type
Detection & Self-
LOFD-002007 /
Optimization
TDLOFD-002007
GSM and LTE
MRFD-231808
Buffer Zone
Optimization(LTE)

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Bit Field Type
NO NO None None Interval Type

LOFD-002004 /
NO NO Self-configuration Enumeration Type
TDLOFD-002004
 LOFD-002004 /
NO NO Self-configuration Interval Type
TDLOFD-002004
 LOFD-002004 /
NO NO Self-configuration Interval Type
TDLOFD-002004

LOFD-001010 / Security
NO NO Enumeration Type
TDLOFD-001010 Mechanism
NO NO None None Bit Field Type

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
 Radio Bearer
TDLBFD-002008 Management
NO NO Enumeration Type
LBFD-002008 Radio Bearer
Management
NO NO None None Bit Field Type

Terminal Awareness
NO NO LBFD-081103 Bit Field Type
Differentiation
 LOFD-001018 /
NO NO S1-flex Bit Field Type
TDLOFD-001018

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

Fair User Sharing

LOFD-001113 License
TDLBFD-004014 Management
LOFD-001036 / RAN Sharing with
NO NO TDLOFD-001036 Common Carrier Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
LOFD-070206 Hybrid RAN
Sharing

NO YES None None Interval Type

 eMBMS Phase 1
based on
NO NO LOFD-070220 Interval Type
Centralized MCE
Architecture

NO YES None None Enumeration Type

NO YES None None Interval Type

eMBMS Phase 1
LOFD-070220 / based on
NO NO Bit Field Type
TDLOFD-070220 Centralized MCE
Architecture

Intra-LTE Load
YES NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing
 Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Enumeration Type

YES NO None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None String Type

NO YES None None Interval Type

NO YES None None Enumeration Type

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018
 LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Enumeration Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

eMBMS Phase 1
based on
YES NO LOFD-070220 Interval Type
Centralized MCE
Architecture
eMBMS Phase 1
based on
YES NO LOFD-070220 Interval Type
Centralized MCE
Architecture

NO NO None None String Type

eMBMS Phase 1
based on
YES NO LOFD-070220 Interval Type
Centralized MCE
Architecture

eMBMS Phase 1
based on
YES NO LOFD-070220 Interval Type
Centralized MCE
Architecture
NO NO None None String Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None String Type

NO YES None None String Type

NO YES None None Enumeration Type

NO YES None None String Type

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018
 LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
Chain Topology
TDLBFD-00300102
NO NO Tree Topology Enumeration Type
LBFD-00300103 /
3GPP R11
TDLBFD-00300103
Specifications
LBFD-001008 /
TDLBFD-070111

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology String Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
NO NO Enumeration Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018
 LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
NO NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

Hybrid RAN
NO NO LOFD-070206 Interval Type
Sharing

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Enumeration Type

 LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
YES NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
Chain Topology
TDLBFD-00300102
Tree Topology
YES NO LBFD-00300103 / Interval Type
S1-flex
TDLBFD-00300103
Hybrid RAN
LOFD-001018 /
Sharing
TDLOFD-001018
LOFD-070206

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
Chain Topology
TDLBFD-00300102
NO NO Tree Topology Enumeration Type
LBFD-00300103 /
3GPP R11
TDLBFD-00300103
Specifications
LBFD-001008 /
TDLBFD-070111

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
NO NO Enumeration Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology Enumeration Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103
 LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology Enumeration Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
LBFD-00300102 / Star Topology
TDLBFD-00300102 Chain Topology
NO NO Interval Type
LBFD-00300103 / Tree Topology
TDLBFD-00300103 S1-flex
LOFD-001018 /
TDLOFD-001018

Hybrid RAN
NO NO LOFD-070206 Interval Type
Sharing

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None String Type

NO YES None None String Type

NO NO None None String Type

NO YES None None Interval Type

NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None String Type

NO YES None None Interval Type

NO YES None None Enumeration Type

YES NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Enumeration Type

YES NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None String Type

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Enumeration Type

NO NO None None String Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
Chain Topology
TDLBFD-00300102
NO NO Tree Topology Enumeration Type
LBFD-00300103 /
3GPP R11
TDLBFD-00300103
Specifications
LBFD-001008 /
TDLBFD-070111

NO NO None None String Type

 LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology Enumeration Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

Hybrid RAN
NO NO LOFD-070206 Interval Type
Sharing

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

YES NO None None String Type

YES NO None None String Type

YES NO None None Interval Type

NO NO None None Enumeration Type

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
YES NO Chain Topology Interval Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

LBFD-00300101 /
TDLBFD-00300101 Star Topology
LBFD-00300102 / Chain Topology
YES NO TDLBFD-00300102 Tree Topology Interval Type
LBFD-00300103 / Hybrid RAN
TDLBFD-00300103 Sharing
LOFD-070206

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
Chain Topology
TDLBFD-00300102
NO NO Tree Topology Enumeration Type
LBFD-00300103 /
3GPP R11
TDLBFD-00300103
Specifications
LBFD-001008 /
TDLBFD-070111

LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology Enumeration Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103
 LBFD-00300101 /
TDLBFD-00300101
Star Topology
LBFD-00300102 /
NO NO Chain Topology Enumeration Type
TDLBFD-00300102
Tree Topology
LBFD-00300103 /
TDLBFD-00300103

Hybrid RAN
NO NO LOFD-070206 Interval Type
Sharing

NO YES None None String Type

NO YES None None String Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Interval Type
TDLBFD-002017

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
 LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017

LBFD-002017 /
NO NO DRX Enumeration Type
TDLBFD-002017
NO NO TDLBFD-002017 DRX Enumeration Type

LBFD-002032 Extended-QCI
YES NO LOFD-00101502 / Dynamic Interval Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
NO NO Transport Interval Type
LOFD-00301102 /
Differentiated Flow
TDLOFD-00301102
Control

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

Dynamic
Scheduling
LOFD-00101502 /
Transport
TDLOFD-00101502
Overbooking
LOFD-00301101
NO NO Transport Enumeration Type
LOFD-00301102 /
Differentiated Flow
TDLOFD-00301102
Control
LOFD-00301103
Transport Resource
Overload Control
 Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
Transport
LOFD-00301101 /
Overbooking
TDLOFD-00301101
NO NO Transport Resource Enumeration Type
LOFD-00301103 /
Overload Control
TDLOFD-00301103
Different Transport
LOFD-003016 /
Paths based on
TDLOFD-003016
QoS Grade

Enhanced
TDLOFD-001015
Scheduling
NO NO LOFD-00101502 / Interval Type
Dynamic
TDLOFD-00101502
Scheduling

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LOFD-001019 /
PS Inter-RAT
TDLOFD-001019
Mobility between E-
LOFD-001020 /
UTRAN and
TDLOFD-001020
GERAN
NO NO LOFD-001021 / Interval Type
PS Inter-RAT
TDLOFD-001021
Mobility between E-
TDLOFD-001022
UTRAN and
TDLOFD-001023
CDMA2000
TDLOFD-001035
SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
CDMA2000 1xRTT
 Dynamic
LOFD-00101502 /
Scheduling
NO NO TDLOFD-00101502 Enumeration Type
Enhanced
TDLOFD-001015
Scheduling

Dynamic
LOFD-00101502 /
Scheduling
NO NO TDLOFD-00101502 Interval Type
Enhanced
TDLOFD-001015
Scheduling

LBFD-002008 / Radio Bearer

NO NO Interval Type
TDLBFD-002008 Management
 Enhanced
TDLOFD-001015 Scheduling
NO NO Enumeration Type
TDLOFD-00101502 Dynamic
Scheduling

Transport
LOFD-00301101 / Overbooking
TDLOFD-00301101 Transport
LOFD-00301102 / Differentiated Flow
TDLOFD-00301102 Control
NO NO Enumeration Type
LOFD-00301103 / Transport Resource
TDLOFD-00301103 Overload Control
LOFD-003016 / Different Transport
TDLOFD-003016 Paths based on
QoS Grade

LOFD-081218 / Enhanced extended

NO NO Enumeration Type
TDLOFD-081215 QCI

LOFD-081218 / Enhanced extended

NO NO Enumeration Type
TDLOFD-081215 QCI
 LOFD-081218 / Enhanced extended
NO NO Enumeration Type
TDLOFD-081215 QCI

SRVCC to UTRAN
SRVCC to GERAN
LOFD-001022 / PS Inter-RAT
TDLOFD-001022 Mobility between E-
LOFD-001023 / UTRAN and
TDLOFD-001023 UTRAN
LOFD-001019 / PS Inter-RAT
YES NO Interval Type
TDLOFD-001019 Mobility between E-
LOFD-001020 / UTRAN and
TDLOFD-001020 GERAN
LOFD-001021 / PS Inter-RAT
TDLOFD-001021 Mobility between E-
UTRAN and
CDMA2000

SRVCC to UTRAN
LOFD-001022 /
PS Inter-RAT
TDLOFD-001022
NO NO Mobility between E- Bit Field Type
LOFD-001019 /
UTRAN and
TDLOFD-001019
UTRAN

SRVCC to GERAN
LOFD-001023 /
PS Inter-RAT
TDLOFD-001023
NO NO Mobility between E- Bit Field Type
LOFD-001020 /
UTRAN and
TDLOFD-001020
GERAN

SRVCC to GERAN
TDLOFD-001023 PS Inter-RAT
NO NO LOFD-001020 / Mobility between E- Bit Field Type
TDLOFD-001020 UTRAN and
GERAN

NO NO None None Bit Field Type

 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Bit Field Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
LOFD-001020 / GERAN
TDLOFD-001020 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO TDLOFD-001021 UTRAN and Enumeration Type
TDLBFD-00201801 CDMA2000
TDLOFD-001022 Coverage Based
TDLOFD-001023 Intra-frequency
TDLOFD-001033 Handover
TDLOFD-001034 SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LBFD-002008 / Radio Bearer

YES NO Interval Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

YES NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management
 LBFD-002008 / Radio Bearer
NO NO Enumeration Type
TDLBFD-002008 Management

Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
YES NO Basic Scheduling Enumeration Type
TDLBFD-002025
Enhanced
TDLOFD-001015
Scheduling
 Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
NO NO Transport Interval Type
LOFD-00301102 /
Differentiated Flow
TDLOFD-00301102
Control

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

Dynamic
Scheduling
Transport
LOFD-00101502 /
Overbooking
TDLOFD-00101502
Transport
LOFD-00301101
Differentiated Flow
NO NO LOFD-00301102 Enumeration Type
Control
LOFD-00301103
Transport Resource
TDLBFD-002025
Overload Control
TDLOFD-001015
Basic Scheduling
Enhanced
Scheduling
 Dynamic
Scheduling
LOFD-00101502 /
Transport
TDLOFD-00101502
Overbooking
LOFD-00301101
NO NO Transport Resource Enumeration Type
LOFD-00301103
Overload Control
LOFD-003016 /
Different Transport
TDLOFD-003016
Paths based on
QoS Grade

Dynamic
LOFD-00101502 /
Scheduling
NO NO TDLOFD-00101502 Interval Type
Enhanced
TDLOFD-001015
Scheduling

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Interval Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN
Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
NO NO Basic Scheduling Interval Type
TDLBFD-002025
Enhanced
TDLOFD-001015
Scheduling
 Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
NO NO Basic Scheduling Enumeration Type
TDLBFD-002025
Enhanced
TDLOFD-001015
Scheduling

Dynamic
LOFD-00101502 /
Scheduling
TDLOFD-00101502
NO NO Basic Scheduling Interval Type
TDLBFD-002025
Enhanced
TDLOFD-001015
Scheduling
 Transport
LOFD-00301101 / Overbooking
TDLOFD-00301101 Transport
LOFD-00301102 / Differentiated Flow
TDLOFD-00301102 Control
NO NO Enumeration Type
LOFD-00301103 / Transport Resource
TDLOFD-00301103 Overload Control
LOFD-003016 / Different Transport
TDLOFD-003016 Paths based on
QoS Grade

YES NO None None Interval Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

 DL 2x2 MIMO
TDLOFD-001001 DL 4x2 MIMO
TDLOFD-001003 DL 4x4 MIMO
NO NO TDLOFD-001060 Single Streaming Enumeration Type
TDLOFD-001049 Beamforming
TDLOFD-001061 Dual Streaming
Beamforming
 DL 2x2 MIMO
TDLOFD-001001 DL 4x2 MIMO
TDLOFD-001003 DL 4x4 MIMO
NO NO TDLOFD-001060 Single Streaming Enumeration Type
TDLOFD-001049 Beamforming
TDLOFD-001061 Dual Streaming
Beamforming
 Basic Scheduling
Dynamic
LBFD-002025
Scheduling
LOFD-00101502
NO NO Single Streaming Enumeration Type
TDLOFD-001049
Beamforming
TDLOFD-001061
Dual Streaming
Beamforming

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502
 LBFD-001006 /
AMC
TDLBFD-001006
CQI Adjustment
NO NO LOFD-00101501 / Enumeration Type
Enhanced
TDLOFD-00101501
Scheduling
TDLOFD-001015
 Physical Channel
NO NO LBFD-002003 Enumeration Type
Management

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Enumeration Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502
 LOFD-001001
DL 2x2 MIMO
LOFD-001003
DL 4x2 MIMO
NO NO LOFD-001060 / Enumeration Type
DL 4X4 MIMO
TDLOFD-001060
DL 2x2 MIMO
TDLOFD-001001
 LOFD-001001
DL 2x2 MIMO
LOFD-001003
DL 4x2 MIMO
NO NO LOFD-001060 / Enumeration Type
DL 4X4 MIMO
TDLOFD-001060
DL 2x2 MIMO
TDLOFD-001001
 LOFD-001001 /
TDLOFD-001001 DL 2x2 MIMO
NO NO LOFD-001003 DL 4x2 MIMO Enumeration Type
LOFD-001060 / DL 4X4 MIMO
TDLOFD-001060

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management

Terminal Awareness
YES NO LBFD-081103 Interval Type
Differentiation

Terminal Awareness
NO NO LBFD-081103 Enumeration Type
Differentiation

Terminal Awareness
NO NO LBFD-081103 Interval Type
Differentiation
 Carrier Aggregation
for Downlink 2CC in
20MHz
Carrier Aggregation
for Downlink 2CC in
40MHz
Flexible CA from
Multiple Carriers
LOFD-002001
Carrier Aggregation
LOFD-002002
for 2CC based on
LOFD-001105
Coordinated BBU
LAOFD-001001
Carrier Aggregation
LAOFD-001002
for Downlink 3CC in
LAOFD-070201
40MHz
LAOFD-001003
Carrier Aggregation
LAOFD-080207
for Downlink 3CC in
LAOFD-080208
60MHz
LAOFD-080202
Carrier Aggregation
LOFD-001048
for Uplink 2CC
NO NO LOFD-001001 Bit Field Type
[Trial]
LOFD-001003
TTI Bundling
LOFD-001060
DL 2x2 MIMO
LBFD-002031
DL 4x2 MIMO
LOFD-001017
DL 4x4 MIMO
TDLOFD-002001
Support of
TDLOFD-002002
aperiodic CQI
TDLOFD-00110501
reports
TDLAOFD-001002
RObust Header
TDLAOFD-070201
Compression
TDLOFD-001048
(ROHC)
LBFD-081103
Automatic
Neighbour Relation
(ANR)
Inter-RAT ANR
Dynamic DRX
Carrier Aggregation
for Downlink 2CC in
40MHz
Terminal Awareness
NO NO LBFD-081103 String Type
Differentiation

YES NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

 PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
CDMA2000
TDLOFD-001019
Mobility
LOFD-001020 /
Management
TDLOFD-001020
Distance Based
LOFD-001021 /
Inter-frequency
TDLOFD-001021
Handover
TDLBFD-002018
Service Based
TDLBFD-00201804
NO NO Inter-frequency Enumeration Type
TDLBFD-00201805
Handover
TDLOFD-001022
SRVCC to UTRAN
TDLOFD-001023
SRVCC to GERAN
TDLOFD-001033
CS Fallback to
TDLOFD-001034
UTRAN
TDLOFD-001035
CS Fallback to
TDLOFD-001043
GERAN
TDLOFD-001072
CS Fallback to
TDLOFD-001046
CDMA2000 1xRTT
TDLOFD-001073
Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Coverage Based
Intra-frequency
LBFD-00201801 / Handover
TDLBFD-00201801 Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO Enumeration Type
LBFD-00201804 / Distance Based
TDLBFD-00201804 Inter-frequency
LBFD-00201805 / Handover
TDLBFD-00201805 Service Based
Inter-frequency
Handover

Coverage Based
Intra-frequency
LBFD-00201801 /
Handover
TDLBFD-00201801
Coverage Based
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
NO NO Handover Enumeration Type
LBFD-00201804 /
Distance Based
TDLBFD-00201804
Inter-frequency
LBFD-00201805 /
Handover
TDLBFD-00201805
Service Based
Inter-frequency
 PS Inter-RAT
Mobility between E-
LOFD-001020 / UTRAN and
TDLOFD-001020 GERAN
NO NO TDLOFD-001023 SRVCC to GERAN Enumeration Type
TDLOFD-001034 CS Fallback to
TDLOFD-001053 GERAN
Flash CS Fallback
to GERAN
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
LBFD-00201801 / Mobility between E-
TDLBFD-00201801 UTRAN and
LBFD-00201802 / GERAN
TDLBFD-00201802 PS Inter-RAT
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
LOFD-001020 / CDMA2000
TDLOFD-001020 Mobility
LOFD-001021 Management
NO NO Enumeration Type
TDLBFD-002018 Distance Based
TDLBFD-00201804 Inter-frequency
TDLBFD-00201805 Handover
TDLOFD-001022 Service Based
TDLOFD-001023 Inter-frequency
TDLOFD-001043 Handover
TDLOFD-001072 SRVCC to UTRAN
TDLOFD-001046 SRVCC to GERAN
TDLOFD-001073 Service based
Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
 Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
Service Based
LBFD-00201801 / Inter-frequency
TDLBFD-00201801 Handover
LBFD-00201802 / PS Inter-RAT
TDLBFD-00201802 Mobility between E-
LBFD-00201804 / UTRAN and
TDLBFD-00201804 UTRAN
LBFD-00201805 / PS Inter-RAT
TDLBFD-00201805 Mobility between E-
LOFD-001019 / UTRAN and
TDLOFD-001019 GERAN
NO NO Interval Type
LOFD-001020 / PS Inter-RAT
TDLOFD-001020 Mobility between E-
LOFD-001021 UTRAN and
TDLBFD-002018 CDMA2000
TDLBFD-001022 Mobility
TDLBFD-001023 Management
TDLBFD-001043 SRVCC to UTRAN
TDLBFD-001072 SRVCC to GERAN
TDLBFD-001046 Service based
TDLBFD-001073 Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LBFD-00201801 /
PS Inter-RAT
TDLBFD-00201801
Mobility between E-
LBFD-00201802 /
UTRAN and
TDLBFD-00201802
GERAN
LOFD-001019 /
Mobility
TDLOFD-001019
Management
LOFD-001020 /
Distance Based
NO NO TDLOFD-001020 Enumeration Type
Inter-frequency
TDLBFD-002018
Handover
TDLBFD-00201804
Service Based
TDLBFD-00201805
Inter-frequency
TDLBFD-001043
Handover
TDLBFD-001072
Service based
TDLBFD-001046
Inter-RAT handover
TDLBFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
LBFD-00201801 /
UTRAN
TDLBFD-00201801
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
GERAN
TDLOFD-001019
Mobility
LOFD-001020 /
Management
TDLOFD-001020
Distance Based
NO NO TDLBFD-002018 Enumeration Type
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001043
Service based
TDLOFD-001072
Inter-RAT handover
TDLOFD-001046
to UTRAN
TDLOFD-001073
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
LBFD-00201801 /
UTRAN
TDLBFD-00201801
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
GERAN
TDLOFD-001019
Mobility
LOFD-001020 /
Management
TDLOFD-001020
Distance Based
NO NO TDLBFD-002018 Enumeration Type
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLBFD-001043
Service based
TDLBFD-001072
Inter-RAT handover
TDLBFD-001046
to UTRAN
TDLBFD-001073
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LBFD-00201801 /
PS Inter-RAT
TDLBFD-00201801
Mobility between E-
LBFD-00201802 /
UTRAN and
TDLBFD-00201802
GERAN
LOFD-001019 /
Mobility
TDLOFD-001019
Management
LOFD-001020 /
Distance Based
NO NO TDLOFD-001020 Interval Type
Inter-frequency
TDLBFD-002018
Handover
TDLBFD-00201804
Service Based
TDLBFD-00201805
Inter-frequency
TDLBFD-001043
Handover
TDLBFD-001072
Service based
TDLBFD-001046
Inter-RAT handover
TDLBFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
LBFD-00201801 /
UTRAN
TDLBFD-00201801
PS Inter-RAT
LBFD-00201802 /
Mobility between E-
TDLBFD-00201802
UTRAN and
LOFD-001019 /
GERAN
TDLOFD-001019
Mobility
LOFD-001020 /
Management
TDLOFD-001020
Distance Based
NO NO TDLBFD-002018 Interval Type
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001043
Service based
TDLOFD-001072
Inter-RAT handover
TDLOFD-001046
to UTRAN
TDLOFD-001073
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LBFD-00201801 /
PS Inter-RAT
TDLBFD-00201801
Mobility between E-
LBFD-00201802 /
UTRAN and
TDLBFD-00201802
GERAN
LOFD-001019 /
Mobility
TDLOFD-001019
Management
LOFD-001020 /
Distance Based
NO NO TDLOFD-001020 Enumeration Type
Inter-frequency
TDLBFD-002018
Handover
TDLBFD-00201804
Service Based
TDLBFD-00201805
Inter-frequency
TDLBFD-001043
Handover
TDLBFD-001072
Service based
TDLBFD-001046
Inter-RAT handover
TDLBFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
LBFD-00201801 /
PS Inter-RAT
TDLBFD-00201801
Mobility between E-
LBFD-00201802 /
UTRAN and
TDLBFD-00201802
GERAN
LOFD-001019 /
Mobility
TDLOFD-001019
Management
LOFD-001020 /
Distance Based
NO NO TDLOFD-001020 Enumeration Type
Inter-frequency
TDLBFD-002018
Handover
TDLBFD-00201804
Service Based
TDLBFD-00201805
Inter-frequency
TDLBFD-001043
Handover
TDLBFD-001072
Service based
TDLBFD-001046
Inter-RAT handover
TDLBFD-001073
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
NO NO UTRAN Enumeration Type
TDLOFD-001022
SRVCC to UTRAN
TDLOFD-001033
CS Fallback to
UTRAN

PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
NO NO UTRAN Enumeration Type
TDLOFD-001022
SRVCC to UTRAN
TDLOFD-001033
CS Fallback to
UTRAN
 Service Based
Inter-frequency
LBFD-00201805 /
Handover
TDLBFD-00201805
Service based inter-
LOFD-001043 /
RAT handover to
TDLOFD-001043
NO NO UTRAN Interval Type
LOFD-001046 /
Service based inter-
TDLOFD-001046
RAT handover to
LOFD-00105401 /
GERAN
TDLOFD-00105401
Camp & Handover
Based on SPID

Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
LOFD-001090 /
Mobility between E-
TDLOFD-001090
UTRAN and
LOFD-001019 /
GERAN
TDLOFD-001019
PS Inter-RAT
LOFD-001020 /
Mobility between E-
TDLOFD-001020
UTRAN and
LOFD-001021 /
NO NO CDMA2000 Interval Type
TDLOFD-001021
SRVCC to UTRAN
TDLBFD-001022
SRVCC to GERAN
TDLBFD-001023
Service based
TDLBFD-001043
Inter-RAT handover
TDLBFD-001072
to UTRAN
TDLBFD-001046
Distance based
TDLBFD-001073
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Enhanced CS
Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
LOFD-001090 /
Mobility between E-
TDLOFD-001090
UTRAN and
LOFD-001019 /
GERAN
TDLOFD-001019
PS Inter-RAT
LOFD-001020 /
Mobility between E-
TDLOFD-001020
UTRAN and
LOFD-001021 /
NO NO CDMA2000 Enumeration Type
TDLOFD-001021
SRVCC to UTRAN
TDLBFD-001022
SRVCC to GERAN
TDLBFD-001023
Service based
TDLBFD-001043
Inter-RAT handover
TDLBFD-001072
to UTRAN
TDLBFD-001046
Distance based
TDLBFD-001073
Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
LOFD-001020 /
SRVCC to GERAN
TDLOFD-001020
CS Fallback to
LOFD-001021
UTRAN
TDLOFD-001023
CS Fallback to
TDLOFD-001033
NO NO GERAN Enumeration Type
TDLOFD-001034
CS Fallback to
TDLOFD-001035
CDMA2000 1xRTT
TDLOFD-001019
PS Inter-RAT
TDLOFD-001046
Mobility between E-
TDLOFD-001073
UTRAN and
UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 PS Inter-RAT
LOFD-001019 /
Mobility between E-
TDLOFD-001019
UTRAN and
LOFD-001022 /
NO NO UTRAN Enumeration Type
TDLOFD-001022
SRVCC to UTRAN
LOFD-001033 /
CS Fallback to
TDLOFD-001033
UTRAN

PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
TDLOFD-001019
NO NO UTRAN Enumeration Type
TDLOFD-001022
SRVCC to UTRAN
TDLOFD-001033
CS Fallback to
UTRAN

Enhanced CS
Fallback to
LOFD-001090 /
CDMA2000 1xRTT
TDLOFD-001090
NO NO PS Inter-RAT Enumeration Type
LOFD-001021 /
Mobility between E-
TDLOFD-001021
UTRAN and
CDMA2000
 Enhanced CS
Fallback to
LOFD-001090 /
CDMA2000 1xRTT
TDLOFD-001090
NO NO PS Inter-RAT Enumeration Type
LOFD-001021 /
Mobility between E-
TDLOFD-001021
UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Enumeration Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

PS Inter-RAT
Mobility between E-
UTRAN and
LOFD-001019 / UTRAN
TDLOFD-001019 PS Inter-RAT
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
NO NO Enumeration Type
LOFD-001021 / GERAN
TDLOFD-001021 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
CDMA2000
SRVCC to UTRAN
SRVCC to GERAN

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

PS Mobility from E-
UTRAN to
CDMA2000 HRPD
Based on
Frequency-specific
LOFD-001111 Factors
NO NO TDLOFD-001090 Enhanced CS Enumeration Type
TDLOFD-001021 Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
CDMA2000
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Based on Enumeration Type
LOFD-001091 Frequency-specific
Factors

Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
LOFD-001019 /
UTRAN and
NO NO TDLOFD-001019 Interval Type
UTRAN
TDLOFD-001052
Flash CS Fallback
to UTRAN
PS Inter-RAT
Mobility between E-
LOFD-001020 /
UTRAN and
NO NO TDLOFD-001020 Interval Type
GERAN
TDLOFD-001053
Flash CS Fallback
to GERAN

LOFD-001034 / CS Fallback to
NO NO Interval Type
TDLOFD-001034 GERAN

CS Fallback to
LOFD-001033 /
UTRAN
NO NO TDLOFD-001033 Interval Type
Flash CS Fallback
TDLOFD-001052
to UTRAN
 LBFD-002018 / Mobility
NO NO Enumeration Type
TDLBFD-002018 Management

LOFD- CS Fallback to
001033/TDLOFD- UTRAN
001033 CS Fallback to
LOFD- GERAN
001034/TDLOFD- PS Inter-RAT
001034 Mobility between E-
NO NO Enumeration Type
LOFD- UTRAN and
001019/TDLOFD- UTRAN
001019 PS Inter-RAT
LOFD- Mobility between E-
001020/TDLOFD- UTRAN and
001020 GERAN
 Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
LBFD-00201801 /
Distance Based
TDLBFD-00201801
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Service Based
LBFD-00201804 /
Inter-frequency
TDLBFD-00201804
Handover
LBFD-00201805 /
Mobility
NO NO TDLBFD-00201805 Interval Type
Management
TDLBFD-002018
SRVCC to UTRAN
TDLBFD-001022
SRVCC to GERAN
TDLBFD-001023
CS Fallback to
TDLBFD-001033
UTRAN
TDLBFD-001034
CS Fallback to
TDLBFD-001035
GERAN
TDLBFD-001019
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN

Coverage Based
Intra-frequency
Handover
Coverage Based
Inter-frequency
Handover
LBFD-00201801 /
Distance Based
TDLBFD-00201801
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201801
Service Based
LBFD-00201804 /
Inter-frequency
TDLBFD-00201801
Handover
LBFD-00201804 /
Mobility
NO NO TDLBFD-00201801 Enumeration Type
Management
TDLBFD-002018
SRVCC to UTRAN
TDLBFD-001022
SRVCC to GERAN
TDLBFD-001023
CS Fallback to
TDLBFD-001033
UTRAN
TDLBFD-001034
CS Fallback to
TDLBFD-001035
GERAN
TDLBFD-001019
CS Fallback to
CDMA2000 1xRTT
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
 Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Enumeration Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Enumeration Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
Intra-frequency
TDLBFD-00201801
NO NO Handover Enumeration Type
LOFD-001032 /
Intra-LTE Load
TDLOFD-001032
Balancing
 Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201802
Handover

NO NO None None Enumeration Type

LBFD-00201802 / Coverage Based

TDLBFD-00201802 Inter-frequency
NO NO LOFD-00109804 / Handover Enumeration Type
TDLAOFD- Carrier
00100306 Management
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201802
Handover

YES NO None None Interval Type

 LOFD-001033 / CS Fallback to
NO NO Enumeration Type
TDLOFD-001033 UTRAN

LOFD-001034 / CS Fall Back to

NO NO Enumeration Type
TDLOFD-001034 GERAN

Enhanced CS
LOFD-001090 / Fallback to
NO NO TDLOFD-001090 CDMA2000 1xRTT Enumeration Type
TDLOFD-001088 CS Fallback
Steering to UTRAN

LOFD-001033 / CS Fallback to
NO NO Interval Type
TDLOFD-001033 UTRAN
 LOFD-001033 / CS Fallback to
NO NO Interval Type
TDLOFD-001033 UTRAN

LOFD-001034 / CS Fall Back to

NO NO Interval Type
TDLOFD-001034 GERAN

Enhanced CS
LOFD-001090 / Fallback to
NO NO TDLOFD-001090 CDMA2000 1xRTT Interval Type
TDLOFD-001088 CS Fallback
Steering to UTRAN

LOFD-001052 / Flash CS Fallback

TDLOFD-001052 to UTRAN
NO NO Interval Type
LOFD-001053 / Flash CS Fallback
TDLOFD-001053 to GERAN
 CS Fallback to
LOFD-001033 /
UTRAN
TDLOFD-001033
CS Fallback to
LOFD-001033 /
NO NO GERAN Interval Type
TDLOFD-001034
Enhanced CS
LOFD-001033 /
Fallback to
TDLOFD-001090
CDMA2000 1xRTT

YES NO None None Interval Type

 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002028 /
NO NO Emergency Call Enumeration Type
TDLBFD-002028

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Bit Field Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Bit Field Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Bit Field Type
TDLBFD-002009 system information

YES NO None None Interval Type

Cell Outage
LOFD-002012 /
Detection and
TDLOFD-002012
NO NO Compensation Enumeration Type
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information
NO NO LBFD- Enumeration Type
Cell Selection and
00201803/TDLBFD
Re-selection
-00201803

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
Broadcast of
NO NO LBFD-002009 / Enumeration Type
system information
TDLBFD-002009
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
Broadcast of
NO NO LBFD-002009 / Interval Type
system information
TDLBFD-002009
Hybrid RAN
LOFD-070206
Sharing
 RAN Sharing with
LOFD-001036 /
Common Carrier
NO NO TDLOFD-001036 Compound Type
Hybrid RAN
LOFD-070206
Sharing

LOFD-001105 /
NO NO Dynamic DRX Enumeration Type
TDLOFD-001105

LOFD-001105 /
NO NO Dynamic DRX Interval Type
TDLOFD-001105

YES NO None None Interval Type

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
YES NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
Broadcast of
NO NO LBFD-002009 / Interval Type
system information
TDLBFD-002009
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
Broadcast of
NO NO LBFD-002009 / Interval Type
system information
TDLBFD-002009
Hybrid RAN
LOFD-070206
Sharing

LOFD-001018 /
NO NO S1-flex Enumeration Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018
 LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018
 LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001018 /
NO NO S1-flex Interval Type
TDLOFD-001018

LOFD-001032 / Intra-LTE Load

NO NO Interval Type
TDLOFD-001032 Balancing

NO YES None None Interval Type

YES NO None None Interval Type

 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

YES NO None None Interval Type

 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 /
Re-selection
TDLBFD-00201803
Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

Cell Selection and

Re-selection
LBFD-00201803 / CS Fallback to
TDLBFD-00201803 CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Enumeration Type
TDLOFD-001021 CDMA2000
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT

Cell Selection and

Re-selection
LBFD-00201803 / CS Fallback to
TDLBFD-00201803 CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Interval Type
TDLOFD-001021 CDMA2000
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
LBFD-002009 / CDMA2000
TDLBFD-002009 Broadcast of
system information

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO LOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 /
Re-selection
TDLBFD-00201803
Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Interval Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Broadcast of Enumeration Type
LBFD-002009 / system information
TDLBFD-002009 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

LOFD-
CS Fallback to
NO NO 001035/TDLOFD- Enumeration Type
CDMA2000 1xRTT
001035
 LOFD-
CS Fallback to
NO NO 001035/TDLOFD- Enumeration Type
CDMA2000 1xRTT
001035

YES NO None None Interval Type

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

YES NO None None Interval Type

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

YES NO None None Interval Type

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection

YES NO None None Interval Type

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 Earthquake and
LBFD-002029 /
Tsunami Warning
TDLBFD-002029
NO NO System (ETWS) Enumeration Type
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

Earthquake and
LBFD-002029 /
Tsunami Warning
TDLBFD-002029
NO NO System (ETWS) Enumeration Type
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

Earthquake and
LBFD-002029 /
NO NO Tsunami Warning Interval Type
TDLBFD-002029
System (ETWS)

Earthquake and
LBFD-002029 /
NO NO Tsunami Warning Enumeration Type
TDLBFD-002029
System (ETWS)

Earthquake and
LBFD-002029 /
NO NO Tsunami Warning Enumeration Type
TDLBFD-002029
System (ETWS)
 LOFD-001092 /
CMAS Support
TDLOFD-001092
NO NO Broadcast of Enumeration Type
LBFD-002009 /
system information
TDLBFD-002009

LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information

LBFD-001001 / 3GPP R8
TDLBFD-001001 Specifications
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 eMBMS Service
Continuity
LOFD-080215
Broadcast of
LBFD-002009 /
system information
NO NO TDLBFD-002009 Enumeration Type
eMBMS Phase 1
LOFD-070220 /
based on
TDLOFD-070220
Centralized MCE
Architecture

eMBMS Service
Continuity
LOFD-080215
Broadcast of
LBFD-002009 /
system information
NO NO TDLBFD-002009 Enumeration Type
eMBMS Phase 1
LOFD-070220 /
based on
TDLOFD-070220
Centralized MCE
Architecture

LBFD-002029 / Broadcast of
NO NO Enumeration Type
TDLBFD-002029 system information

YES NO None None Interval Type

 LBFD-002026 / Uplink Power
TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002026 / Uplink Power
TDLBFD-002026 Control
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002026 / Uplink Power
TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002026 / Uplink Power
TDLBFD-002026 Control
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-
Uplink Power
NO NO 002026/TDLBFD- Enumeration Type
Control
002026

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO NO None None Interval Type

CPRI
LOFD-001076 /
Compression /
NO NO TDLOFD-001076 / Enumeration Type
Enhanced CPRI
TDLOFD-081214
Compression

NO YES None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

 SectorEqmRefType[
YES NO None None
]

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

 CPRI
LOFD-001076 /
Compression /
NO NO TDLOFD-001076 / Enumeration Type
Enhanced CPRI
TDLOFD-081214
Compression

YES NO None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type
 Uplink Timing
NO NO LBFD-070101 Enumeration Type
Based on PUCCH
NO NO None None Enumeration Type
NO NO None None Enumeration Type
NO NO None None Interval Type

YES NO None None Interval Type

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
YES NO None None Interval Type

YES NO None None String Type

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Re-selection
 LBFD-00100401 /
TDLBFD-00100401 Normal CP
LOFD-001031 / Extended CP
NO NO Enumeration Type
TDLOFD-001031 Broadcast of
LBFD-002009 / system information
TDLBFD-002009
 LBFD-00100401 /
TDLBFD-00100401 Normal CP
NO NO Enumeration Type
LOFD-001031 / Extended CP
TDLOFD-001031
 Cell Selection and
LBFD-00201803 /
Re-selection
TDLBFD-00201803
Broadcast of
LBFD-002009 /
YES NO system information Interval Type
TDLBFD-002009
Multi-Band
LBFD-070103 /
Compatibility
TDLBFD-00201806
Enhancement

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 Coverage Based
LBFD-00201801 /
Intra-frequency
TDLBFD-00201801
Handover
LBFD-00201803 /
NO NO Cell Selection and Interval Type
TDLBFD-00201803
Re-selection
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

Broadcast of
LBFD-002009 /
system information
TDLBFD-002009
Coverage Based
LBFD-00201801 /
YES NO Intra-frequency Interval Type
TDLBFD-00201801
Handover
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection
 Compact
LOFD-001051
Bandwidth
LBFD-002009 /
YES NO Broadcast of Enumeration Type
TDLBFD-002009
system information
TDLBFD-001003
Scalable Bandwidth
 Compact
LOFD-001051
Bandwidth
LBFD-002009 /
YES NO Broadcast of Enumeration Type
TDLBFD-002009
system information
TDLBFD-001003
Scalable Bandwidth

LBFD-002009 / Broadcast of
YES NO Interval Type
TDLBFD-002009 system information
 Compact
LOFD-001051
Bandwidth
YES NO LBFD-002009 / Interval Type
Broadcast of
TDLBFD-002009
system information

LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information
NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Interval Type

 Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
LBFD-002009 type1&2
TDLBFD-001007 uplink-downlink
TDLBFD-00100701 special subframe
TDLBFD-00100702 configuration type 7
YES NO Enumeration Type
TDLOFD-001026 Optional uplink-
TDLOFD-00102601 downlink subframe
TDLOFD-00102602 configuration
TDLOFD-00102603 uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
 Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
LBFD-002009 type1&2
TDLBFD-001007 uplink-downlink
TDLBFD-00100701 special subframe
TDLBFD-00100702 configuration type 7
NO NO Enumeration Type
TDLOFD-001026 Optional uplink-
TDLOFD-00102601 downlink subframe
TDLOFD-00102602 configuration
TDLOFD-00102603 uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
 Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
LBFD-002009 type1&2
TDLBFD-001007 uplink-downlink
TDLBFD-00100701 special subframe
TDLBFD-00100702 configuration type 7
NO NO Enumeration Type
TDLOFD-001026 Optional uplink-
TDLOFD-00102601 downlink subframe
TDLOFD-00102602 configuration
TDLOFD-00102603 uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5
 Coverage Based
Intra-frequency
Handover
Mobility
Management
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
Handover
LBFD-00201801 / Service Based
TDLBFD-00201801 Inter-frequency
TDLBFD-002018 Handover
TDLBFD-00201802 PS Inter-RAT
TDLBFD-00201804 Mobility between E-
TDLBFD-00201805 UTRAN and
NO NO Enumeration Type
TDLOFD-001019 UTRAN
TDLOFD-001043 Service based
TDLOFD-001072 Inter-RAT handover
TDLOFD-001020 to UTRAN
TDLOFD-001046 Distance based
TDLOFD-001073 Inter-RAT handover
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Coverage Based
Intra-frequency
Handover
Cell Selection and
Re-selection
Mobility
Management
Coverage Based
Inter-frequency
Handover
Distance Based
Inter-frequency
LBFD-00201801 Handover
LBFD-00201803 Service Based
TDLBFD-002018 Inter-frequency
TDLBFD-00201802 Handover
TDLBFD-00201804 PS Inter-RAT
TDLBFD-00201805 Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
TDLOFD-001043 UTRAN
TDLOFD-001072 Service based
TDLOFD-001020 Inter-RAT handover
TDLOFD-001046 to UTRAN
TDLOFD-001073 Distance based
Inter-RAT handover
to UTRAN
PS Inter-RAT
Mobility between E-
UTRAN and
GERAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 LBFD-002010 / Random Access
YES NO Interval Type
TDLBFD-002010 Procedure
 LOFD-001007 / High Speed Mobility
NO NO TDLOFD-001007 Ultra High Speed Enumeration Type
LOFD-001008 Mobility
 LBFD-002010 / Random Access
NO NO Interval Type
TDLBFD-002010 Procedure
 Random Access
LBFD-002010 / Procedure
TDLBFD-002010 Random Access
NO NO LBFD-002010 / Procedure / Interval Type
TDLBFD-002010 / Extended Cell
LOFD-081223 Access Radius
beyond 100km
 Compact
NO NO LOFD-001051 Enumeration Type
Bandwidth
 Compact
NO NO LOFD-001051 Interval Type
Bandwidth
 Compact
NO NO LOFD-001051 Interval Type
Bandwidth

LBFD-002029 / Earthquake and

TDLBFD-002029 Tsunami Warning
LOFD-001092 / System (ETWS)
NO NO Enumeration Type
TDLOFD-001092 CMAS Support
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002029 / Earthquake and
TDLBFD-002029 Tsunami Warning
LOFD-001092 / System (ETWS)
NO NO Interval Type
TDLOFD-001092 CMAS Support
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Enumeration Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

LBFD-002026 / Uplink Power

TDLBFD-002026 Control
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 SFN
LOFD-003029 / Adaptive
TDLOFD-001075 SFN/SDMA
TDLOFD-002008 Inter-BBP SFN
NO NO TDLOFD-001098 Inter-BBU SFN Enumeration Type
TDLOFD-001080 Inter-BBP Adaptive
TDLOFD-001081 SFN/SDMA
TDLOFD-001082 Inter-BBU Adaptive
SFN/SDMA
 SFN
LOFD-003029 /
Adaptive
TDLOFD-001075
SFN/SDMA
LOFD-070205 /
Inter-BBP SFN
TDLOFD-002008
NO NO Inter-BBU SFN Enumeration Type
TDLOFD-001098
Inter-BBP Adaptive
TDLOFD-001080
SFN/SDMA
TDLOFD-001081
Inter-BBU Adaptive
TDLOFD-001082
SFN/SDMA
 CPRI
LOFD-001076 /
Compression /
NO NO TDLOFD-001076 / Enumeration Type
Enhanced CPRI
TDLOFD-081214
Compression

NO NO None None Interval Type

NO NO None None Enumeration Type
 LOFD-001001 /
TDLOFD-001001
DL 2x2 MIMO
LOFD-001003 /
NO NO DL 4x2 MIMO Enumeration Type
TDLOFD-001003
DL 4x4 MIMO
LOFD-001060 /
TDLOFD-001060
YES NO None None Enumeration Type

NO NO None None String Type

 Intra-Band Carrier
Aggregation for
Downlink 2CC
Inter-Band Carrier
Aggregation for
Downlink 2CC
LAOFD-00100101
Carrier Aggregation
LAOFD-00100102
for Downlink 2CC in
LAOFD-00100201
NO NO 40MHz Enumeration Type
LAOFD-00100202
Support of UE
TDLAOFD-001003
Category 6
TDLAOFD-001002
Aggregation for
Downlink 2CC in
30MHz
Carrier Aggregation
for Downlink 2CC in
40MHz

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LOFD-001001 /
TDLOFD-001001
DL 2x2 MIMO
LOFD-001003 /
NO NO DL 4x2 MIMO Enumeration Type
TDLOFD-001003
DL 4x4 MIMO
LOFD-001060 /
TDLOFD-001060

NO NO None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None String Type

NO YES None None Enumeration Type

NO YES None None String Type

NO YES None None Enumeration Type
NO YES None None Enumeration Type

NO YES None None String Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

Multi-Band
LBFD-070103 /
YES NO Compatibility MultiBand[]
TDLBFD-00201806
Enhancement
YES NO None None Interval Type

Hybrid RAN
NO NO LOFD-070206 Interval Type
Sharing

NO YES None None String Type

NO YES None None String Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO NO None None Enumeration Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

NO YES None None Enumeration Type

 LOFD- Automatic
NO NO 002001/TDLOFD- Neighbour Relation Enumeration Type
002001 (ANR)

Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)
 Broadcast of
system information
Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
LBFD-002009 type1&2
TDLBFD-001007 uplink-downlink
TDLBFD-00100701 special subframe
TDLBFD-00100702 configuration type 7
NO NO Enumeration Type
TDLOFD-001026 Optional uplink-
TDLOFD-00102601 downlink subframe
TDLOFD-00102602 configuration
TDLOFD-00102603 uplink-downlink
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

Static TDM
TDLAOFD-002001 /
eICIC/Static TDM
NO NO LOFD-001099 / Enumeration Type
eICIC/Dynamic
LAOFD-081233
TDM eICIC

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

Extended Cell
NO NO LOFD-081223 Access Radius Interval Type
beyond 100km

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

Inter-BBU SFN
TDLOFD-001080
YES NO Inter-BBU Adaptive Interval Type
TDLOFD-001082
SFN/SDMA

YES NO None None Interval Type

YES NO None None Interval Type

Inter-BBU SFN
TDLOFD-001080
NO NO Inter-BBU Adaptive Interval Type
TDLOFD-001082
SFN/SDMA

Inter-BBU SFN
TDLOFD-001080
NO NO Inter-BBU Adaptive Interval Type
TDLOFD-001082
SFN/SDMA

NO NO None None Interval Type

 CPRI
TDLOFD-001076 / Compression /
NO NO Enumeration Type
TDLOFD-081214 Enhanced CPRI
Compression

Inter-eNodeB SFN
based on
coordinated BBU
LOFD-081208 Inter-eNodeB
YES NO Interval Type
LOFD-081209 adaptive
SFN/SDMA based
on coordinated
BBU

YES NO None None Interval Type

YES NO None None Interval Type

 Inter-eNodeB SFN
based on
coordinated BBU
LOFD-081208 Inter-eNodeB
NO NO Interval Type
LOFD-081209 adaptive
SFN/SDMA based
on coordinated
BBU

Inter-eNodeB SFN
based on
coordinated BBU
LOFD-081208 Inter-eNodeB
NO NO Interval Type
LOFD-081209 adaptive
SFN/SDMA based
on coordinated
BBU

SfnSectorEqmRefT
YES NO None None
ype[]

YES NO None None Interval Type

Inter-eNodeB SFN
based on
coordinated BBU
LOFD-081208 Inter-eNodeB
NO NO Enumeration Type
LOFD-081209 adaptive
SFN/SDMA based
on coordinated
BBU
YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing

Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing

Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing

Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing

Intra-LTE Backoff
NO NO TDLOFD-081212 Interval Type
Load Balancing
 Uplink Traffic-based
NO NO TDLOFD-081236 Interval Type
MLB to LTE FDD

Uplink Traffic-based
NO NO TDLOFD-081236 Interval Type
MLB to LTE FDD

Uplink Traffic-based
NO NO TDLOFD-081236 Interval Type
MLB to LTE FDD

YES NO None None Interval Type

 Single Streaming
TDLOFD-001049 Beamforming
NO NO Enumeration Type
TDLOFD-001061 Dual Streaming
Beamforming

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None String Type

NO YES None None Interval Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

Single Streaming
TDLOFD-001049 Beamforming
NO NO Enumeration Type
TDLOFD-001061 Dual Streaming
Beamforming

YES NO None None Interval Type

 TDLOFD-
NO NO 00101501/LOFD- CQI Adjustment Interval Type
00101501

TDLOFD-
NO NO 00101501/LOFD- CQI Adjustment Interval Type
00101501
 TDLOFD-
NO NO 00101501/LOFD- CQI Adjustment Interval Type
00101501

TDLOFD-
NO NO 00101501/LOFD- CQI Adjustment Interval Type
00101501

YES NO None None Interval Type

 DL 2*2 MIMO
DL 4*2 MIMO
LOFD-001001
DL 4x4 MIMO
LOFD-001003
DL 2-Layer MIMO
LOFD-001060
Based on TM9
TDLAOFD-
NO NO DL 4-Layer MIMO Enumeration Type
00100114
Based on TM9
TDLAOFD-081409
DL 2*2 MIMO
LAOFD-080210
based on TM9
LAOFD-080205
DL 4*2 MIMO
based on TM9

DL 2*2 MIMO
LAOFD-080210 based on TM9
LAOFD-080205 / DL 4*2 MIMO
TDLAOFD- based on TM9
00100113 DL 8x2 MIMO
NO NO Enumeration Type
TDLAOFD- based on TM9
00100114 DL 4x4 MIMO
TDLAOFD-080406 based on TM9
TDLAOFD-080407 DL 8x4 MIMO
based on TM9

NO YES None None Enumeration Type

 DL 2*2 MIMO
LOFD-001001
DL 4*2 MIMO
LOFD-001003
DL 4x4 MIMO
LOFD-001060
NO NO DL 2-Layer MIMO Interval Type
TDLAOFD-
Based on TM9
00100114
DL 4-Layer MIMO
TDLAOFD-081409
Based on TM9
 DL 2*2 MIMO
LOFD-001001
DL 4*2 MIMO
LOFD-001003
DL 4x4 MIMO
LOFD-001060
NO NO DL 2-Layer MIMO Interval Type
TDLAOFD-
Based on TM9
00100114
DL 4-Layer MIMO
TDLAOFD-081409
Based on TM9
 DL 2*2 MIMO
LOFD-001001
DL 4*2 MIMO
LOFD-001003
DL 4x4 MIMO
LOFD-001060
NO NO DL 2-Layer MIMO Interval Type
TDLAOFD-
Based on TM9
00100114
DL 4-Layer MIMO
TDLAOFD-081409
Based on TM9
 DL 2*2 MIMO
LOFD-001001
DL 4*2 MIMO
LOFD-001003
DL 4x4 MIMO
LOFD-001060
NO NO DL 2-Layer MIMO Interval Type
TDLAOFD-
Based on TM9
00100114
DL 4-Layer MIMO
TDLAOFD-081409
Based on TM9

YES NO None None Interval Type

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
NO NO Enumeration Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
NO NO LOFD-070208 Enumeration Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
NO NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)
 Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

YES NO None None Interval Type

Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Interval Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Interval Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Interval Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Interval Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

YES NO None None Interval Type

GSM and LTE FDD

NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)

GSM and LTE FDD

NO NO MRFD-090202 Dynamic Spectrum Enumeration Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Enumeration Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)
 GSM and LTE FDD
NO NO MRFD-090202 Dynamic Spectrum Interval Type
Sharing(LTE FDD)

GSM and LTE FDD

NO NO MRFD-090202 Dynamic Spectrum Enumeration Type
Sharing(LTE FDD)

YES NO None None Interval Type

LOFD-070207 / Intelligent Access

NO NO Interval Type
TDLOFD-070207 Class Control
 LOFD-070207 / Intelligent Access
NO NO Interval Type
TDLOFD-070207 Class Control

LOFD-070207 / Intelligent Access

NO NO Interval Type
TDLOFD-070207 Class Control

Dynamic Service
LOFD-008002 /
NO NO Specific Access Interval Type
TDLOFD-008002
Control
 Dynamic Service
LOFD-008002 /
NO NO Specific Access Interval Type
TDLOFD-008002
Control

Dynamic Service
LOFD-008002 /
NO NO Specific Access Bit Field Type
TDLOFD-008002
Control

Dynamic Service
LOFD-008002 /
NO NO Specific Access Interval Type
TDLOFD-008002
Control
 LOFD-070207 / Intelligent Access
NO NO Interval Type
TDLOFD-070207 Class Control

LOFD-070207 / Intelligent Access

NO NO Interval Type
TDLOFD-070207 Class Control

YES NO None None Interval Type

NO NO LAOFD-002001 Static TDM eICIC Enumeration Type

NO NO LAOFD-002001 Static TDM eICIC Enumeration Type

 LAOFD- Static TDM
NO NO 002001/LAOFD- eICIC/Dynamic Interval Type
081233 TDM eICIC

Dynamic TDM
NO NO LAOFD-081233 Interval Type
eICIC

YES NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Interval Type

YES NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type

YES NO None None Interval Type

LOFD-001040 / Low Power

NO NO Enumeration Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Enumeration Type
TDLOFD-001040 Consumption Mode
 LOFD-001040 / Low Power
NO NO Compound Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Compound Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Interval Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Interval Type
TDLOFD-001040 Consumption Mode
 LOFD-001040 / Low Power
NO NO Interval Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Interval Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Interval Type
TDLOFD-001040 Consumption Mode
 LOFD-001040 / Low Power
NO NO Interval Type
TDLOFD-001040 Consumption Mode

LOFD-001040 / Low Power

NO NO Enumeration Type
TDLOFD-001040 Consumption Mode

YES NO None None Interval Type

eMBMS Phase 1
LOFD-070220 / based on
NO YES Interval Type
TLOFD-070220 Centralized MCE
Architecture
eMBMS Phase 1
LOFD-070220 / based on
NO NO Interval Type
TDLOFD-070220 Centralized MCE
Architecture
eMBMS Phase 1
LOFD-070220 / based on
NO YES String Type
TLOFD-070220 Centralized MCE
Architecture
 eMBMS Phase 1
LOFD-070220 / based on
NO NO Bit Field Type
TDLOFD-070220 Centralized MCE
Architecture

eMBMS Phase 1
LOFD-070220 / based on
YES NO ServiceAreaIdRef[]
TLOFD-070220 Centralized MCE
Architecture

YES NO None None Interval Type

eMBMS Service
NO NO LOFD-080215 Bit Field Type
Continuity

eMBMS Phase 1
LOFD-070220 / based on
NO NO Bit Field Type
TLOFD-070220 Centralized MCE
Architecture

YES NO None None Interval Type

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing
 Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

YES NO None None Interval Type

 LOFD-002005 / Mobility Robust
NO NO Enumeration Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Enumeration Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Enumeration Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Bit Field Type
TDLOFD-002005 Optimization(MRO)

YES NO None None Interval Type

 Uplink Power
NO NO TDLBFD-002026 Enumeration Type
Control
 Uplink Power
NO NO LBFD-002026 Enumeration Type
Control

Uplink Power
NO NO LBFD-002026 Interval Type
Control
 Uplink Power
NO NO LBFD-002026 Interval Type
Control

Uplink Power
NO NO LBFD-002026 Interval Type
Control
NO NO None None Interval Type
 NI based Power
NO NO TDLOFD-081219 Enumeration Type
Control
 NI based Power
NO NO TDLOFD-081219 Enumeration Type
Control

Uplink Power
NO NO TDLBFD-002026 Interval Type
Control
 Uplink Power
NO NO TDLBFD-002026 Interval Type
Control

Dynamic
TDLOFD-00101502 Scheduling
NO NO Enumeration Type
TDLBFD-002026 Uplink Power
Control
 Uplink Power
NO NO TDLDBF-002026 Enumeration Type
Control
 Uplink Power
NO NO TDLDBF-002026 Interval Type
Control
 Uplink Power
NO NO TDLDBF-002026 Enumeration Type
Control
 Interference Based
NO NO TDLOFD-081219 Uplink Power Enumeration Type
Control

Interference Based
NO NO TDLOFD-081219 Uplink Power Interval Type
Control
 Interference Based
NO NO TDLOFD-081219 Uplink Power Interval Type
Control

YES NO None None Interval Type

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing
 Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

YES NO None None Interval Type

 LBFD-002010 / Random Access
NO NO Interval Type
TDLBFD-002010 Procedure
 LBFD-002010 / Random Access
NO NO Interval Type
TDLBFD-002010 Procedure

LOFD-002015 /
NO YES RACH Optimization String Type
TDLOFD-002015

LOFD-002015 /
NO YES RACH Optimization Interval Type
TDLOFD-002015

LOFD-002015 /
NO YES RACH Optimization Interval Type
TDLOFD-002015

LOFD-002015 /
NO YES RACH Optimization String Type
TDLOFD-002015
NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023

LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023

LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023

LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023
 LBFD-002024 /
NO NO Congestion Control Interval Type
TDLBFD-002024
 LBFD-002024 /
NO NO Congestion Control Interval Type
TDLBFD-002024
 LBFD-002024 /
NO NO Congestion Control Interval Type
TDLBFD-002024
 LBFD-002024 /
NO NO Congestion Control Interval Type
TDLBFD-002024
 LBFD-002024 /
NO NO Congestion Control Interval Type
TDLBFD-002024
 LBFD-002023 /
TDLBFD-002023 Admission Control
NO NO Interval Type
LBFD-002024 / Congestion Control
TDLBFD-002024
 LBFD-002023 /
TDLBFD-002023 Admission Control
NO NO Interval Type
LBFD-002024 / Congestion Control
TDLBFD-002024

LBFD-002023 /
NO NO Admission Control Interval Type
TDLBFD-002023

YES NO None None Interval Type

RF Channel
LOFD-001039 /
NO NO Intelligent Enumeration Type
TDLOFD-001039
Shutdown
 RF Channel
LOFD-001039 /
NO NO Intelligent Compound Type
TDLOFD-001039
Shutdown

RF Channel
LOFD-001039 /
NO NO Intelligent Compound Type
TDLOFD-001039
Shutdown

RF Channel
LOFD-001039 /
NO NO Intelligent Interval Type
TDLOFD-001039
Shutdown

RF Channel
NO NO TDLOFD-001039 Intelligent Interval Type
Shutdown

RF Channel
NO NO TDLOFD-001039 Intelligent Interval Type
Shutdown

RF Channel
NO NO TDLOFD-001039 Intelligent Interval Type
Shutdown
 RF Channel
NO NO TDLOFD-001039 Intelligent Interval Type
Shutdown

RF Channel
NO NO LOFD-001039 Intelligent Interval Type
Shutdown
NO YES None None Enumeration Type
NO YES None None Enumeration Type

YES NO None None Interval Type

NO NO None None Enumeration Type

 Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
TDLBFD-001007
special subframe
TDLBFD-00100701
configuration type 7
TDLBFD-00100702
Optional uplink-
NO NO TDLOFD-001026 Interval Type
downlink subframe
TDLOFD-00102601
configuration
TDLOFD-00102602
uplink-downlink
TDLOFD-00102603
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
TDLBFD-001007
special subframe
TDLBFD-00100701
configuration type 7
TDLBFD-00100702
Optional uplink-
NO NO TDLOFD-001026 Enumeration Type
downlink subframe
TDLOFD-00102601
configuration
TDLOFD-00102602
uplink-downlink
TDLOFD-00102603
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

YES NO None None Interval Type

NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Enumeration Type
TDLOFD-001042
the Same Coverage

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Compound Type
TDLOFD-001042
the Same Coverage

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Compound Type
TDLOFD-001042
the Same Coverage
 Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Interval Type
TDLOFD-001042
the Same Coverage

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Interval Type
TDLOFD-001042
the Same Coverage

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Interval Type
TDLOFD-001042
the Same Coverage

Intelligent Power-
LOFD-001042 /
NO NO Off of Carriers in Interval Type
TDLOFD-001042
the Same Coverage

YES NO None None Interval Type

SRLTE
NO NO LOFD-080212 Enumeration Type
Optimization
 SRLTE
NO NO LOFD-080212 Interval Type
Optimization

SRLTE
NO NO LOFD-080212 Interval Type
Optimization
YES NO None None Interval Type

Uplink Static Inter-

Cell Interference
LBFD-00202202 / Coordination
NO NO TDLBFD-00202202 Uplink Dynamic Interval Type
LOFD-00101402 Inter-Cell
Interference
Coordination

YES NO None None Interval Type

 Basic Scheduling
LBFD-002025 /
Dynamic
TDLBFD-002025
NO NO Scheduling Enumeration Type
TDLOFD-001015
Enhanced
TDLOFD-00101502
Scheduling
 UL Synchronous
LBFD-002006 / HARQ
TDLBFD-002006 Basic Scheduling
NO NO TDLBFD-002025 Enhanced Enumeration Type
TDLOFD-001015 Scheduling
TDLOFD-00101502 Dynamic
Scheduling
 LBFD-001006 /
AMC
NO NO TDLBFD-001006 Interval Type
UL 64QAM
TDLOFD-001006

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Enhanced Enumeration Type
LOFD-001015 /
Scheduling
TDLOFD-001015

TDLBFD-002023 Admission Control

NO NO Interval Type
TDLBFD-002024 Congestion Control
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 Dynamic
LOFD-00101502 /
Scheduling
NO NO TDLOFD-00101502 Interval Type
Enhanced
TDLOFD-001015
Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 LBFD-
NO NO 002025/TDLBFD- Basic Scheduling Interval Type
002025

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 VoIP Semi-
NO NO TDLOFD-001016 persistent Enumeration Type
Scheduling
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management

Dynamic
NO NO LOFD-00101502 Interval Type
Scheduling
 LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling

LOFD-00101502 /
Enhanced
TDLOFD-00101502
NO NO Scheduling Interval Type
LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO None None Interval Type

VoIP Semi-
LOFD-001016 /
NO NO persistent Enumeration Type
TDLOFD-001016
Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 Voice Characteristic
NO NO LOFD-081229 Awareness Bit Field Type
Scheduling
 Dynamic
NO NO LOFD-00101502 Interval Type
Scheduling

Intra-eNodeB
NO NO LOFD-081206 Coordinated Uplink Interval Type
AMC
NO NO LOFD-001048 TTI Bundling Enumeration Type
NO NO LOFD-001048 TTI Bundling Enumeration Type
NO NO LOFD-001048 TTI Bundling Interval Type
NO NO LOFD-001048 TTI Bundling Interval Type

LOFD-001048 /
NO NO TTI Bundling Enumeration Type
TDLOFD-001048
NO NO LOFD-001048 TTI Bundling Enumeration Type

NO NO None None Bit Field Type

 UL 2x4 MU-MIMO /
TDLOFD-001058 / UL 2x8 MU-MIMO /
NO NO TDLOFD-081205 / UL 2x8 MU- Enumeration Type
TDSLBFD-0307 MIMO(per Cell)
(TDD)

Dynamic
NO NO LOFD-00101502 Interval Type
Scheduling
 Dynamic
NO NO LOFD-00101502 Interval Type
Scheduling
 Dynamic
NO NO LOFD-00101502 Enumeration Type
Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling

Dynamic
NO NO LOFD-00101502 Enumeration Type
Scheduling
NO NO LBFD-081105 Voice-Specific AMC Interval Type

Adaptive
NO NO TDLOFD-002008 Interval Type
SFN/SDMA
 UL Unifed Overload
YES NO MRFD-101402 Interval Type
Control

UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control
 UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control
 UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control
 UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control
 UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control
 UL Unifed Overload
NO NO MRFD-101402 Interval Type
Control

YES NO None None Interval Type

NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

Intelligent Power-
Off of Carriers in
the Same Coverage
LOFD-001074
NO NO of UMTS Network Enumeration Type
MRFD-231901
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)

Intelligent Power-
Off of Carriers in
the Same Coverage
LOFD-001074
NO NO of UMTS Network Compound Type
MRFD-231901
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)
 Intelligent Power-
Off of Carriers in
the Same Coverage
LOFD-001074
NO NO of UMTS Network Compound Type
MRFD-231901
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)

Intelligent Power-
Off of Carriers in
NO NO LOFD-001074 Interval Type
the Same Coverage
of UMTS Network

Intelligent Power-
Off of Carriers in
NO NO LOFD-001074 Interval Type
the Same Coverage
of UMTS Network
 Intelligent Power-
Off of Carriers in
NO NO LOFD-001074 Interval Type
the Same Coverage
of UMTS Network

Intelligent Power-
Off of Carriers in
the Same Coverage
LOFD-001074
NO NO of UMTS Network Enumeration Type
MRFD-231901
Multi-RAT Carrier
Joint Intelligent
Shutdown(eNodeB)

Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)
 Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)

Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)

Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)

Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)
 Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)

Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Interval Type
Shutdown(eNodeB)

YES NO None None Interval Type

 LOFD-001003 DL 4x2 MIMO
NO NO Enumeration Type
LOFD-001060 DL 4x4 MIMO

LOFD-001003 DL 4x2 MIMO

NO NO Compound Type
LOFD-001060 DL 4x4 MIMO
 LOFD-001003 DL 4x2 MIMO
NO NO Interval Type
LOFD-001060 DL 4x4 MIMO

LOFD-001003 DL 4x2 MIMO

NO NO Interval Type
LOFD-001060 DL 4x4 MIMO
 Super Combined
YES NO LOFD-081221 Interval Type
Cell

Super Combined
YES NO LOFD-081221 Interval Type
Cell

YES NO None None Interval Type

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone
 UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

UL Refarming Zero
NO NO MRFD-101221 Interval Type
Bufferzone

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

LOFD-002015 /
NO NO RACH Optimization Bit Field Type
TDLOFD-002015
 LBFD-002003 / Physical Channel
NO NO Bit Field Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Bit Field Type
TDLBFD-002003 Management

Active Queue
LOFD-001027 /
NO NO Management Bit Field Type
TDLOFD-001027
(AQM)
 LOFD-00101501 /
CQI Adjustment
TDLOFD-00101501
NO NO Dynamic Bit Field Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502

Adaptive Power
NO NO LOFD-001025 Bit Field Type
Consumption
 LBFD-002023 / Admission Control
TDLBFD-002023 Congestion Control
NO NO LBFD-002024 / Radio/transport Bit Field Type
TDLBFD-002024 resource pre-
LOFD-00102901 emption
 LOFD-001032 /
Intra-LTE
TDLOFD-001032
Load Balancing
LOFD-001044 /
Inter-RAT Load
NO NO TDLOFD-001044 Bit Field Type
Sharing to UTRAN
LOFD-001045 /
Inter-RAT Load
TDLOFD-001045
Sharing to GERAN
LOFD-001057
 LBFD-002003 / Physical Channel
TDLBFD-002003 Management
LBFD-002009 / Broadcast of
NO NO Bit Field Type
TDLBFD-002009 system information
LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
LBFD-002026 / Uplink Power
NO NO Bit Field Type
TDLBFD-002026 Control
LBFD-081101 / PUCCH Outer Loop
TDLBFD-081104 Power Control

Single Streaming
TDLOFD-001049 Beamforming
NO NO Bit Field Type
TDLOFD-001061 Dual Streaming
Beamforming
 VoIP Semi-
persistent
LOFD-001016 / Scheduling
TDLOFD-001016 Dynamic
LOFD-00101502 / Scheduling
TDLOFD-00101502 DL Non-GBR
LOFD-001109 / Packet Bundling
TDLOFD-001109 Symbol Power
LOFD-001070 / Saving
TDLOFD-001070 Scheduling Based
NO NO Bit Field Type
TDLOFD-070224 on Max Bit Rate
LBFD-002025 / Basic Scheduling
TDLBFD-002025 Support of
LBFD-002031 / aperiodic CQI
TDLBFD-002031 reports
LBFD-070102 / MBR>GBR
TDLBFD-070102 Configuration
LBFD-060202 Enhanced DL
Frequency
Selective
 VoIP Semi-
persistent
LOFD-001016 / Scheduling
TDLOFD-001016 TTI Bundling
LOFD-001048 / Dynamic
TDLOFD-001048 Scheduling
LOFD-00101502 / Basic
TDLOFD-00101502 SchedulingTDLOFD
NO NO Bit Field Type
TDLBFD-002025 -070224:Scheduling
LBFD-070102 / Based on Max Bit
TDLBFD-070102 Rate
LOFD-001002 MBR>GBR
LOFD-001058 Configuration
LBFD-001006 UL 2x2 MU-MIMO
UL 2x4 MU-MIMO
AMC

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
NO NO Priority Based Enumeration Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
NO NO None None Bit Field Type
 MU-Beamforming
TDLOFD-001077 3GPP R8
TDLBFD-001001 Specifications
NO NO TDLAOFD- DL 2-Layer MIMO Bit Field Type
00100114 Based on TM9
TDLAOFD-081409 DL 4-Layer MIMO
Based on TM9

Distance Based
Inter-frequency
LBFD-00201804 /
Handover
TDLBFD-00201804
Distance based
LOFD-001072 /
NO NO Inter-RAT handover Enumeration Type
TDLOFD-001072
to UTRAN
LOFD-001073 /
Distance based
TDLOFD-001073
Inter-RAT handover
to GERAN
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LOFD-0700206 / Dynamic AC
TLOFD-0700206 Barring

UL Interference
LOFD-001012 /
NO NO Rejection Enumeration Type
TDLOFD-001012
Combining

NO NO None None Enumeration Type

NO NO None None Enumeration Type

 LOFD-001094 / Control Channel
NO NO Bit Field Type
TDLOFD-001094 IRC

DRX, LOFD-
LBFD- 00110501/TDLOFD
NO NO 002017/TDLBFD- -00110501:Dynamic Bit Field Type
002017 DRX, TDLBFD-
070112:Smart DRX

High-Mobility-
LOFD-001106 Triggered Idle Mode
NO NO Enumeration Type
TDLOFD-00110502 High-Mobility-
Triggered Idle Mode
 GSM and LTE
Buffer Zone
MRFD-231808
NO NO Optimization(LTE) Bit Field Type
MRFD-101221
UL Refarming Zero
Bufferzone

GSM and LTE

NO NO MRFD-231806 Dynamic Power Enumeration Type
Sharing(LTE)
 LAOFD- Static TDM
NO NO 002001/LAOFD- eICIC/Dynamic Enumeration Type
081233 TDM eICIC

NO NO None None Enumeration Type

 Inter-eNodeB DL
NO NO TDLAOFD-081411 CoMP based on Bit Field Type
Relaxed backhaul

NO NO LOFD-001096 Advanced Receiver Bit Field Type

 LOFD-001032 / Intra-LTE Load
TDLOFD-001032 Balancing
LOFD-001044 / TD Inter-RAT Load
NO NO Bit Field Type
LOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
 Intra-eNodeB UL
CoMP
Intra-eNodeB UL
LOFD-001066 /
CoMP Phase II
TDLOFD-001066
UL CoMP based on
LOFD-070222
Coordinated BBU
LOFD-070223
NO NO Hetnet UL CoMP Bit Field Type
LAOFD-080203
UL CoMP based on
LOFD-081219
relaxed backhaul
LAOFD-070213
Intra-eNodeB UL
LAOFD-070214
CoMP Phase II
UL CoMP based on
Coordinated BBU

Single Streaming
Beamforming
TDLOFD-
001061:Dual
NO NO TDLOFD-001049 Streaming Bit Field Type
Beamforming
TDLOFD-
001060:DL 4x4
MIMO

GSM and LTE FDD

NO NO MRFD-090202 Dynamic Spectrum Bit Field Type
Sharing(LTE FDD)
 Adaptive
NO NO TDLOFD-002008 Enumeration Type
SFN/SDMA
 UL Interference
LOFD-001012 /
NO NO Rejection Bit Field Type
TDLOFD-001012
Combining

LBFD-00201803 / Cell Selection and

NO NO Enumeration Type
TDLBFD-00201803 Re-selection
 SFN
TDLOFD-001075 Adaptive
TDLOFD- SFN/SDMA
002008/LOFD- PDCCH DCS in
NO NO 070205 SFN Bit Field Type
TDLOFD-070227 PDCCH SDMA in
TDLOFD-081221 SFN
LOFD-081221 Super Combined
Cell
 LOFD- Control Channel
NO NO 001094/TDLOFD- IRC/Control Enumeration Type
001094 Channel IRC

DL 2*2 MIMO
LAOFD-080210 based on TM9
LAOFD-080205 / DL 4*2 MIMO
TDLAOFD- based on TM9
00100113 DL 8x2 MIMO
NO NO Bit Field Type
TDLAOFD- based on TM9
00100114 DL 4x4 MIMO
TDLAOFD-080406 based on TM9
TDLAOFD-080407 DL 8x4 MIMO
based on TM9
 Multi-Cell
Interference
Randomizing
TDLBFD-070111 Multi-Cell
NO NO TDLOFD-070223 Interference Enumeration Type
LOFD-00101502 Randomizing and
Coordination
Dynamic
Scheduling

Dynamic Downlink
NO NO LBFD-002016 Bit Field Type
Power Allocation
 Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Bit Field Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
 DL Asynchronous
NO NO TDLBFD-002005 Bit Field Type
HARQ
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201802
Handover

eMBMS Service
Continuity
LOFD-080215
Broadcast of
LBFD-002009 /
system information
NO NO TDLBFD-002009 Enumeration Type
eMBMS Phase 1
LOFD-070220 /
based on
TDLOFD-070220
Centralized MCE
Architecture
 LOFD-00101502 /
Enhanced
TDLOFD-00101502
NO NO Scheduling Bit Field Type
LBFD-002025 /
Basic Scheduling
TDLBFD-002025

NO NO None None Bit Field Type

 TDLOFD-
003029/LOFD-
SFN
003029
NO NO Adaptive Bit Field Type
TDLOFD-
SFN/SDMA
070205/LOFD-
070205

Handover
Enhancement at
Speed Mobility
LOFD-081228
NO NO Handover Enumeration Type
TDLOFD-080205
Enhancement at
Ultra High Speed
Mobility
 Out of Band Relay
NO NO TDLAOFD-080405 Bit Field Type
introduction

Handover
Enhancement at
Speed Mobility
LOFD-081228
NO NO Handover Enumeration Type
TDLOFD-080205
Enhancement at
Ultra High Speed
Mobility
NO NO None None Enumeration Type

NO NO None None Bit Field Type

 LOFD-
Control Channel
NO NO 001094/TDLOFD- Enumeration Type
IRC
001094
 Dynamic Service
LOFD-008002 /
Specific Access
TDLOFD-080202
NO NO Control Bit Field Type
LOFD-070207 /
Intelligent Access
TDLOFD-081222
Class Control
 Static TDM
LOFD-001099 /
NO NO eICIC/Dynamic Enumeration Type
LAOFD-081233
TDM eICIC

Intra-LTE Backoff
NO NO TDLOFD-081212 Bit Field Type
Load Balancing
 Service Based
LBFD-00201805 /
NO NO Inter-frequency Bit Field Type
TDLBFD-00201805
Handover
 LOFD- Neighbor cell
NO NO 081225/TDLOFD- Classification Bit Field Type
081225 Management
 Specified PCI
LOFD-081207 / Group Based
NO NO Bit Field Type
TDLOFD-081207 Neighboring Cell
Management

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO LAOFD-081234 FeICIC Enumeration Type

 Intra-eNodeB
NO NO LOFD-081206 Coordinated Uplink Bit Field Type
AMC

NO NO None None Enumeration Type

 Coordinated
Scheduling and
Interference
NO NO TDLOFD-081218 Bit Field Type
Resistance in High-
Speed Railway
Scenarios
 Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Bit Field Type
081203 Service Rate
Adaption

Enhanced extended
LOFD-081218 QCI
NO NO Enumeration Type
TDLOFD-081215 Enhanced extended
QCInt
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 Voice Characteristic
LOFD-081229 /
NO NO Awareness Enumeration Type
TDLOFD-081229
Scheduling
 Intra-eNodeB UL
LOFD-001066 /
CoMP
TDLOFD-001066
Intra-eNodeB UL
LOFD-070222 /
CoMP Phase II
TDLOFD-081208
NO NO UL CoMP based on Bit Field Type
LOFD-070223 /
Coordinated BBU
TDLOFD-081207
SFN
LOFD-003029
Adaptive
LOFD-070205
SFN/SDMA

NO NO TDLOFD-001001 DL 2X2MIMO Bit Field Type

 Uplink Traffic-based
NO NO TDLOFD-081236 Bit Field Type
MLB to LTE FDD

LOFD-001023 /
NO NO SRVCC to GERAN Bit Field Type
TDLOFD-001023

YES NO None None Interval Type

 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

Adaptive Inter-Cell
NO NO LOFD-060201 Interference Interval Type
Coordination
 Adaptive Inter-Cell
NO NO LOFD-060201 Interference Interval Type
Coordination

YES NO None None Interval Type

 LBFD-002003 / Physical Channel
TDLBFD-002003 Management
NO NO Interval Type
LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation

YES NO None None Interval Type

 Dynamic Downlink
Power Allocation
Downlink Static
LBFD-002016 /
Inter-Cell
TDLBFD-002016
Interference
NO NO LBFD-00202201 / Enumeration Type
Coordination
TDLBFD-00202201
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 Dynamic Downlink
Power Allocation
Downlink Static
LBFD-002016 /
Inter-Cell
TDLBFD-002016
Interference
NO NO LBFD-00202201 / Enumeration Type
Coordination
TDLBFD-00202201
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination

YES NO None None Interval Type

 LBFD-002016 / Dynamic Downlink
NO NO Interval Type
TDLBFD-002016 Power Allocation

YES NO None None Interval Type

 Basic Scheduling
LBFD-002025 /
Enhanced
TDLBFD-002025
NO NO Scheduling Enumeration Type
TDLOFD-001015
Dynamic
TDLOFD-00101502
Scheduling

NO NO None None Interval Type

 LOFD-001001 /
TDLOFD-001001
DL 2x2 MIMO
LOFD-001003 /
NO NO DL 4x2 MIMO Enumeration Type
TDLOFD-001003
DL 4X4 MIMO
LOFD-001060 /
TDLOFD-001060

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101
Aggregation for
LAOFD-00100102
Downlink 2CC in
LAOFD-00100201 /
20MHz
TDLAOFD-001002
Carrier Aggregation
LAOFD-00100202 /
for Downlink 2CC in
TDLAOFD-
40MHz
00100102
Support of UE
LAOFD-070201 /
Category 6
TDLAOFD-070201
NO NO Flexible CA from Enumeration Type
LAOFD-070202
Multiple Carriers
TDLAOFD-
Inter-eNodeB CA
00100111
based on
LOFD-001015 /
Coordinated BBU
TDLOFD-001015
Intra-band Carrier
LOFD-00101501 /
Aggregation for
TDLOFD-00101501
Downlink 2CC in
LOFD-00101502 /
30MHz
TDLOFD-00101502
Enhanced
Scheduling
CQI Adjustment
Dynamic
Scheduling
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LOFD-00101502 / Dynamic
NO NO Enumeration Type
TDLOFD-00101502 Scheduling
 LOFD-00101502/ Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

LBFD-
002025/TDLBFD-
Basic Scheduling
002025
NO NO Dynamic Enumeration Type
LOFD-
Scheduling
00101502/TDLOFD
-00101502

LBFD-
002025/TDLBFD-
Basic Scheduling
002025
NO NO Dynamic Enumeration Type
LOFD-
Scheduling
00101502/TDLOFD
-00101502
 LBFD-
002025/TDLBFD-
Basic Scheduling
002025
NO NO Dynamic Enumeration Type
LOFD-
Scheduling
00101502/TDLOFD
-00101502

LBFD-
NO NO 002025/TDLBFD- Basic Scheduling Interval Type
002025

Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)
 LBFD-002025 /
Basic Scheduling
TDLBFD-002025
NO NO Dynamic Interval Type
LOFD-00101502 /
Scheduling
TDLOFD-00101502

LBFD-002025 /
TDLBFD-002025
Basic Scheduling
LOFD-00101502 /
Dynamic
TDLOFD-00101502
NO NO Scheduling Enumeration Type
LOFD-001060 /
DL 4X4 MIMO
TDLOFD-001060
DL 2X2 MIMO
LOFD-001001 /
TDLOFD-001001

Intra-Band Carrier
Aggregation for
Downlink 2CC in
LAOFD-00100101 / 20MHz
TDLAOFD- Inter-Band Carrier
00100101 Aggregation for
LAOFD-00100102 / Downlink 2CC in
TDLAOFD- 20MHz
00100102 Carrier Aggregation
LAOFD-00100201 / for Downlink 2CC in
TDLAOFD-001002 40MHz
NO NO Enumeration Type
LAOFD-00100202 / Support of UE
TDLAOFD- Category 6
00100102 Flexible CA from
LAOFD-070201 / Multiple Carriers
TDLAOFD-070201 Inter-eNodeB CA
LAOFD-070202 based on
TDLAOFD- Coordinated BBU
00100111 Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 VoIP Semi-
NO NO TDLOFD-001016 persistent Enumeration Type
Scheduling
 CQI Adjustment
LOFD-00101501
NO NO Dynamic Enumeration Type
LOFD-00101502
Scheduling
NO NO TDLOFD-001001 DL 2X2 MIMO Bit Field Type

DL 2*2 MIMO
LAOFD-080210 based on TM9
NO NO Bit Field Type
LAOFD-080205 DL 4*2 MIMO
based on TM9
 LBFD-
002025/TDLBFD-
Basic Scheduling
002025
NO NO Dynamic Enumeration Type
LOFD-
Scheduling
00101502/TDLOFD
-00101502

LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling
 LOFD-00101502 / Dynamic
NO NO Interval Type
TDLOFD-00101502 Scheduling

Multi-Cell
Interference
Randomizing
TDLBFD-070111 Multi-Cell
NO NO TDLOFD-070223 Interference Enumeration Type
LOFD-00101502 Randomizing and
Coordination
Dynamic
Scheduling
 TDLBFD- Basic
NO NO 002025/TDLOFD- Scheduling/Dynami Enumeration Type
001015 c Scheduling

LOFD-00101502 /
Enhanced
TDLOFD-00101502
NO NO Scheduling Interval Type
LBFD-002025 /
Basic Scheduling
TDLBFD-002025
 LBFD-
002011/TDLBFD-
Paging Random
NO NO 002011 LBFD- Interval Type
Access Procedure
002010/TDLBFD-
002010

NO NO LOFD-00101501 CQI Adjustment Interval Type

 DL 2-Layer MIMO
TDLAOFD-
Based on TM9
NO NO 00100114 Bit Field Type
DL 4-Layer MIMO
TDLAOFD-081409
Based on TM9

Adaptive
LOFD-070205 SFN/SDMA
NO NO Interval Type
TDLOFD-002008 Adaptive
SFN/SDMA
 Enhanced DL
LBFD-060202, Frequency
NO NO Interval Type
LOFD-00101502 Selective, Dynamic
Scheduling

Dynamic
NO NO TDLOFD-00101502 Bit Field Type
Scheduling
 Enhanced DL
Frequency
LBFD-060202 Selective
NO NO TDLOFD-00101502 Dynamic Enumeration Type
LOFD-00101502 Scheduling
Dynamic
Scheduling

Adaptive
TDLOFD-002008 SFN/SDMA
NO NO Interval Type
LOFD-070205 Adaptive
SFN/SDMA

Adaptive
TDLOFD-002008 SFN/SDMA
NO NO Interval Type
LOFD-070205 Adaptive
SFN/SDMA
 TDLOFD-002008 / Adaptive
NO NO Interval Type
LOFD-070205 SFN/SDMA

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO YES None None String Type

NO YES None None Enumeration Type

NO YES None None Interval Type

 Dynamic
Scheduling
LOFD-00101502
NO NO Support of Enumeration Type
LBFD-002031
aperiodic CQI
reports

YES NO None None Interval Type

 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing
 LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

LOFD-001032 / Intra-LTE Load

TDLOFD-001032 Balancing
LOFD-001044 / Inter-RAT Load
NO NO Interval Type
TDLOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
 LOFD-001032 / Intra-LTE Load
TDLOFD-001032 Balancing
LOFD-001044 / Inter-RAT Load
NO NO Interval Type
TDLOFD-001044 Sharing to UTRAN
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

LOFD-001044 / Inter-RAT Load

TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
 LOFD-001044 / Inter-RAT Load
NO NO Interval Type
TDLOFD-001044 Sharing to UTRAN

LOFD-001032 / Intra-LTE Load

NO NO Interval Type
TDLOFD-001032 Balancing
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Enumeration Type
TDLOFD-070215
Balancing

Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing

Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing

LOFD-001032 /
NO NO Intra-LTE Enumeration Type
TDLOFD-001032
 Operator Load
LOFD-070204 /
NO NO Based Intra-LTE Enumeration Type
TDLOFD-070204
MLB

Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
 LOFD-001044 / Inter-RAT Load
NO NO Enumeration Type
TDLOFD-001044 Sharing to UTRAN

LOFD-
Intra-LTE Load
NO NO 001032/TDLOFD- Bit Field Type
Balancing
001032
 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing
 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Bit Field Type
TDLOFD-070215
Balancing

Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
 LOFD-
001044/TDLOFD- Inter-RAT Load
001044 Sharing to UTRAN
NO NO Interval Type
LOFD- Inter-RAT Load
001045/TDLOFD- Sharing to GERAN
001045

Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
 LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Enumeration Type
TDLOFD-070215
Balancing
 Intra-LTE User
LOFD-070215 /
NO NO Number Load Enumeration Type
TDLOFD-070215
Balancing
 LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

Intra-LTE User
NO NO TDLOFD-070215 Number Load Enumeration Type
Balancing
 LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Enumeration Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

LOFD-001044 / Inter-RAT Load

TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

Intra-LTE Load
NO NO TDLOFD-001032 Enumeration Type
Balancing
 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing
 Intra-LTE Load
LOFD-001032 /
Balancing
TDLOFD-001032
NO NO Intra-LTE User Enumeration Type
LOFD-070215 /
Number Load
TDLOFD-070215
Balancing

LOFD-001044 / Inter-RAT Load

TDLOFD-001044 Sharing to UTRAN
NO NO Enumeration Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN
 LOFD-001044 / Inter-RAT Load
TDLOFD-001044 Sharing to UTRAN
NO NO Interval Type
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to GERAN

Intra-LTE Load
LOFD-001032 /
Balancing
TDLOFD-001032
Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
LOFD-001044 /
Inter-RAT Load
TDLOFD-001044
Sharing to UTRAN

Intra-LTE Load
LOFD-001032 /
Balancing
TDLOFD-001032
Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
LOFD-001044 /
Inter-RAT Load
TDLOFD-001044
Sharing to UTRAN
 Intra-LTE Load
LOFD-001032 /
Balancing
TDLOFD-001032
Intra-LTE User
LOFD-070215 /
NO NO Number Load Interval Type
TDLOFD-070215
Balancing
LOFD-001044 /
Inter-RAT Load
TDLOFD-001044
Sharing to UTRAN

Multi-RRU Cell
NO NO TDLOFD-081210 Bit Field Type
Load Balancing
 Intra-LTE Load
LOFD-001032 / Balancing
NO NO TDLOFD-001032 Operator Load Interval Type
LOFD-070204 Based Intra-LTE
MLB
 Intra-LTE User
Number Load
LOFD-070215 /
Balancing
NO NO TDLOFD-070215 Interval Type
Operator Load
LOFD-070204
Based Intra-LTE
MLB

Intra-LTE User
Number Load
LOFD-070215 /
Balancing
NO NO TDLOFD-070215 Interval Type
Operator Load
LOFD-070204
Based Intra-LTE
MLB
 Intra-LTE Load
NO NO TDLOFD-001032 Interval Type
Balancing

YES NO None None Interval Type

NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type

NO NO None None Interval Type

YES NO None None Interval Type

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 Adaptive
NO NO TDLOFD-002008 Interval Type
SFN/SDMA
 LBFD-002003 / Physical Channel
NO NO Interval Type
TDLBFD-002003 Management

LBFD-002003 / Physical Channel

NO NO Interval Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Interval Type
TDLBFD-002003 Management

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type
 Physical Channel
NO NO LBFD-002003 Enumeration Type
Management

LBFD-002003 / Physical Channel

NO NO Interval Type
TDLBFD-002003 Management
 Physical Channel
NO NO TDLBFD-002003 Enumeration Type
Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 Physical Channel
NO NO LBFD-002003 Interval Type
Management
 PDCCH SDMA in
NO NO TDLOFD-081221 Interval Type
SFN
 LBFD-002003 / Physical Channel
NO NO Bit Field Type
TDLBFD-002003 Management

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 Physical Channel
NO NO LBFD-002003 Enumeration Type
Management

PDCCH Utilization
LBFD-
Improvement;Physi
NO NO 070107;TDLBFD- Interval Type
cal Channel
002003
Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management

YES NO None None Interval Type

 LBFD-002003 / Physical Channel
NO NO Interval Type
TDLBFD-002003 Management
 Physical Channel
NO NO LBFD-002003 Enumeration Type
Management
 LBFD-002003 / Physical Channel
NO NO Bit Field Type
TDLBFD-002003 Management

LBFD-001001 / 3GPP R8
YES NO Interval Type
TDLBFD-001001 Specifications

LBFD-002007 / RRC Connection

NO NO Interval Type
TDLBFD-002007 Management
 Dynamic
NO NO TDLOFD-00101502 Enumeration Type
Scheduling

NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LBFD-001001 / 3GPP R8
YES NO Interval Type
TDLBFD-001001 Specifications
NO NO None None Enumeration Type

NO NO None None Interval Type

YES NO None None Interval Type

Sleeping Cell
NO NO LOFD-002010 Compound Type
Detection

Sleeping Cell
NO NO LOFD-002010 Compound Type
Detection
 Sleeping Cell
NO NO LOFD-002010 Interval Type
Detection

YES NO None None Interval Type

Uplink Static Inter-

Cell Interference
LBFD-00202202 / Coordination
NO NO TDLBFD-00202202 Uplink Dynamic Enumeration Type
LOFD-00101402 Inter-Cell
Interference
Coordination

YES NO None None Interval Type

 GSM and LTE
NO NO MRFD-231808 Buffer Zone Interval Type
Optimization(LTE)

NO NO None None Interval Type

Out of Band Relay

YES NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

YES NO TDLAOFD-080405 Enumeration Type
introduction
 Out of Band Relay
YES NO TDLAOFD-080405 Enumeration Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction

Out of Band Relay

NO NO TDLAOFD-080405 Interval Type
introduction

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

YES NO None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

Super Combined
YES NO LOFD-081221 Interval Type
Cell

Super Combined
YES NO LOFD-081221 Interval Type
Cell
 Super Combined
YES NO LOFD-081221 String Type
Cell

Super Combined
YES NO LOFD-081221 String Type
Cell

Super Combined
YES NO LOFD-081221 Interval Type
Cell

Super Combined
YES NO LOFD-081221 Interval Type
Cell

Super Combined
YES NO LOFD-081221 Interval Type
Cell

YES NO None None Interval Type

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

YES NO None None Interval Type

 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002011 Paging
LBFD-002016 / Dynamic Downlink
NO NO TDLBFD-002016 Power Allocation Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LOFD-001047 / LoCation Services
TDLOFD-001047 (LCS)

Dynamic Downlink
NO NO LBFD-002016 Interval Type
Power Allocation
 eMBMS Phase 1
LOFD-
based on
NO NO 070220/TDLOFD- Interval Type
Centralized MCE
070220
Architecture.

YES NO None None Interval Type

LBFD-002016 / Dynamic Downlink

TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
 LBFD-002016 / Dynamic Downlink
TDLBFD-002016 Power Allocation
NO NO Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information

NO NO None None Interval Type

YES NO None None Interval Type

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
LBFD-002010 / Random Access
NO NO Enumeration Type
TDLBFD-002010 Procedure
LBFD-002026 / Uplink Power
TDLBFD-002026 Control
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
LBFD-002010 / Random Access
NO NO Enumeration Type
TDLBFD-002010 Procedure
LBFD-002026 / Uplink Power
TDLBFD-002026 Control

NO YES None None Interval Type

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-002010 / Random Access
TDLBFD-002010 Procedure
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-002010 / Random Access
TDLBFD-002010 Procedure

LBFD-002009 /
Broadcast of
TDLBFD-002009
NO NO system information Enumeration Type
LOFD-002015 /
RACH Optimization
TDLOFD-002015
 LBFD-002009 /
Broadcast of
TDLBFD-002009
system information
LBFD-002010 /
NO NO Random Access Interval Type
TDLBFD-002010
Procedure
LOFD-002015 /
RACH Optimization
TDLOFD-002015

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-002010 / Random Access
TDLBFD-002010 Procedure
 LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Enumeration Type
LBFD-002010 / Random Access
TDLBFD-002010 Procedure

LBFD-002009 / Broadcast of
TDLBFD-002009 system information
NO NO Interval Type
LBFD-002010 / Random Access
TDLBFD-002010 Procedure

LBFD-002010 / Random Access

NO NO Enumeration Type
TDLBFD-002010 Procedure
 LBFD-002010 / Random Access
NO NO Interval Type
TDLBFD-002010 Procedure

YES NO None None Interval Type

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 Physical Channel
NO NO TDLBFD-002003 Enumeration Type
Management
NO NO None None Enumeration Type

NO YES None None Enumeration Type

YES NO None None Interval Type

 Physical Channel
LBFD-002003 /
Management
TDLBFD-002003
Compact
NO NO LOFD-001051 Enumeration Type
Bandwidth
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

Physical Channel
LBFD-002003 /
Management
TDLBFD-002003
Compact
NO NO LOFD-001051 Enumeration Type
Bandwidth
LBFD-002009 /
Broadcast of
TDLBFD-002009
system information

YES NO None None Interval Type

 LBFD-002009 /
Broadcast of
TDLBFD-002009
NO NO system information Enumeration Type
LBFD-002011 /
Paging
TDLBFD-002011

LBFD-002009 /
Broadcast of
TDLBFD-002009
NO NO system information Enumeration Type
LBFD-002011 /
Paging
TDLBFD-002011
 LBFD-002011 /
NO NO Paging Interval Type
TDLBFD-002011
 LBFD-002011 /
NO NO Paging Interval Type
TDLBFD-002011
 TDLBFD-
NO NO 002011/LBFD- Paging Enumeration Type
002011

YES NO None None Interval Type

 LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information
 LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information
 LOFD-001006 /
NO NO UL 64QAM Enumeration Type
TDLOFD-001006

YES NO None None Interval Type

LBFD-002003 / Physical Channel

NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Interval Type
TDLBFD-002003 Management

LBFD-002003 / Physical Channel

NO NO Interval Type
TDLBFD-002003 Management
 Physical Channel
LBFD-002003 /
Management
NO NO TDLBFD-002003 Interval Type
PUCCH Flexible
LOFD-001093
Configuration

LBFD-001001 / 3GPP R8
TDLBFD-001001 Specifications
NO YES Interval Type
LBFD-002003 / Physical Channel
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management
 LBFD-002003 / Physical Channel
NO NO Enumeration Type
TDLBFD-002003 Management

YES NO None None Interval Type

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS String Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS String Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
YES NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS String Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Enumeration Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
NO NO TDLOFD-001035 Enhanced CS Interval Type
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

YES NO None None Interval Type

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000
PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO TDLOFD-001021 UTRAN and Enumeration Type
LOFD-002002 CDMA2000
Inter-RAT ANR

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO TDLOFD-001021 UTRAN and Enumeration Type
LOFD-002002 CDMA2000
Inter-RAT ANR
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO TDLOFD-001021 UTRAN and Enumeration Type
LOFD-002002 CDMA2000
Inter-RAT ANR

YES NO None None Interval Type

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

YES NO None None Interval Type

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-
Mobility between E-
YES NO 001021/TDLOFD- Interval Type
UTRAN and
001021
CDMA2000

YES NO None None Interval Type

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
YES NO LOFD-001021 / UTRAN and Enumeration Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
YES NO LOFD-001021 / UTRAN and Interval Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT
 CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Interval Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Enumeration Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Interval Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT
 CS Fallback to
CDMA2000 1xRTT
LOFD-001035 / PS Inter-RAT
TDLOFD-001035 Mobility between E-
NO NO LOFD-001021 / UTRAN and Interval Type
TDLOFD-001021 CDMA2000
TDLOFD-001090 Enhanced CS
Fallback to
CDMA2000 1xRTT

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
YES NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
YES NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
YES NO String Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
YES NO String Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
YES NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)
 Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB)
YES NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

NO YES None None Enumeration Type

Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 String Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
YES NO LOFD-070208 Interval Type
Power
Control(Cloud BB)
 RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / String Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / String Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

YES NO None None Interval Type

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / String Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing
 RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / String Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
LOFD-001036 / RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
 LOFD-001036 / RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier
 LOFD-001036 / RAN Sharing with
TDLOFD-001036 Common Carrier
YES NO Interval Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

LOFD-001036 / RAN Sharing with

TDLOFD-001036 Common Carrier
YES NO String Type
LOFD-001037 / RAN Sharing with
TDLOFD-001037 Dedicated Carrier

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Enumeration Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO String Type
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001021 / Mobility between E-
YES NO Interval Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO String Type
TDLOFD-001021 UTRAN and
CDMA2000

PS Inter-RAT
LOFD-001021 / Mobility between E-
NO NO TDLOFD-001021 UTRAN and Enumeration Type
LOFD-002002 CDMA2000
Inter-RAT ANR

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT
 Enhanced CS
LOFD-001090 /
YES NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT
 Enhanced CS
LOFD-001090 /
NO NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT

LOFD-001090 / Enhanced CS
TDLOFD-001090 Fallback to
NO NO Enumeration Type
LOFD-002002 / CDMA2000 1xRTT
TDLOFD-002002 Inter-RAT ANR

YES NO None None Interval Type

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT
 Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
YES NO Fallback to Interval Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to Enumeration Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
Fallback to
NO NO TDLOFD-001090 Enumeration Type
CDMA2000 1xRTT
LOFD-002002
Inter-RAT ANR

Enhanced CS
LOFD-001090 /
Fallback to
NO NO TDLOFD-001090 Enumeration Type
CDMA2000 1xRTT
LOFD-002002
Inter-RAT ANR
 Enhanced CS
LOFD-001090 /
NO NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT

Enhanced CS
LOFD-001090 /
NO NO Fallback to String Type
TDLOFD-001090
CDMA2000 1xRTT
 LOFD-001090 / Enhanced CS
TDLOFD-001090 Fallback to
NO NO Enumeration Type
LOFD-002002 / CDMA2000 1xRTT
TDLOFD-002002 Inter-RAT ANR

YES NO None None Interval Type

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
YES NO LOFD-001035 / CDMA2000 1xRTT Enumeration Type
TDLOFD-001035 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
NO NO LOFD-001035 / CDMA2000 1xRTT Enumeration Type
TDLOFD-001035 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
NO NO LOFD-001035 / CDMA2000 1xRTT Interval Type
TDLOFD-001035 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
NO NO LOFD-001035 / CDMA2000 1xRTT Interval Type
TDLOFD-001035 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 CS Fallback to
NO NO LOFD-001035 / CDMA2000 1xRTT Interval Type
TDLOFD-001035 Enhanced CS
TDLOFD-001090 Fallback to
CDMA2000 1xRTT

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
NO NO Enumeration Type
LOFD-001021 / Mobility between E-
TDLOFD-001021 UTRAN and
CDMA2000

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
NO NO Interval Type
LOFD-001021 / Mobility between E-
TDLOFD-001021 UTRAN and
CDMA2000

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
NO NO Interval Type
LOFD-001021 / Mobility between E-
TDLOFD-001021 UTRAN and
CDMA2000

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
NO NO Interval Type
LOFD-001021 / Mobility between E-
TDLOFD-001021 UTRAN and
CDMA2000
 PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO String Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO String Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
GERAN

LOFD-001023 / SRVCC to GERAN

YES NO TDLOFD-001023 CS Fallback with Interval Type
LOFD-001069 LAI to GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001020 UTRAN and
GERAN

CS Fallback to
GERAN
LOFD-001034 /
Flash CS Fallback
LOFD-001034
to GERAN
NO NO LOFD-001053 Interval Type
PS Inter-RAT
LOFD-001020 /
Mobility between E-
TDLOFD-001020
UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
LOFD-001020 /
UTRAN and
TDLOFD-001020
GERAN
LOFD-001023 /
SRVCC to GERAN
TDLOFD-001023
CS Fallback to
LOFD-001034 /
YES NO GERAN Enumeration Type
TDLOFD-001034
Service based inter-
LOFD-001046 /
RAT handover to
TDLOFD-001046
GERAN
LOFD-001073 /
Distance based
TDLOFD-001073
inter-RAT handover
to GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
GERAN
PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
GERAN
 PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
LOFD-001020 /
UTRAN and
TDLOFD-001020
NO NO GERAN Enumeration Type
LOFD-001046 /
Service based inter-
TDLOFD-001046
RAT handover to
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO String Type
TDLOFD-001020 UTRAN and
GERAN

LOFD-001023 /
NO NO SRVCC to GERAN Enumeration Type
TDLOFD-001023
 LOFD-081283 / Ultra-Flash CSFB to
NO NO Enumeration Type
TDLOFD-081203 GERAN

LOFD-00105401 /
NO NO Camp Enumeration Type
TDLOFD-00105401

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
YES NO None None Interval Type

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO String Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO String Type
TDLOFD-001020 UTRAN and
GERAN

SRVCC to GERAN
LOFD-001023 / Flash CS Fallback
TDLOFD-001023 to GERAN
LOFD-001053 CS Fallback with
YES NO LOFD-001069 LAI to GERAN Interval Type
LOFD- PS Inter-RAT
001020/TDLOFD- Mobility between E-
001020 UTRAN and
GERAN

PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
GERAN

NO NO LOFD-002002 Inter-RAT ANR Enumeration Type

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001020 UTRAN and
GERAN

PS Inter-RAT
Mobility between E-
LOFD-001020 / UTRAN and
TDLOFD-001020 GERAN
NO NO TDLOFD-001023 SRVCC to GERAN Interval Type
TDLOFD-001034 CS Fallback to
TDLOFD-001053 GERAN
Flash CS Fallback
to GERAN
 LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002

LOFD-002001 /
Automatic Neighbor
TDLOFD-002001
NO NO Relation (ANR) String Type
LOFD-002002 /
Inter-RAT ANR
TDLOFD-002002

Automatic
LOFD-002001 /
Neighbour Relation
NO NO TDLOFD-002001 String Type
(ANR)
LOFD-002002
Inter-RAT ANR
 Multi-RAT Carrier
NO NO MRFD-231901 Joint Intelligent Enumeration Type
Shutdown(eNodeB)

LOFD-
002002/TDLOFD-
Inter-RAT ANR
002002
NO NO Flash CS Fallback Interval Type
LOFD-
to GERAN;
001053/TDLOFD-
001053

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002

NO YES None None Interval Type

NO YES None None String Type

NO YES None None String Type

YES NO None None Interval Type

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
YES NO Interval Type
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
GERAN
PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Enumeration Type
TDLOFD-001020 UTRAN and
GERAN
Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
YES NO Interval Type
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
GERAN

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
YES NO Enumeration Type
LOFD-001020 / Mobility between E-
TDLOFD-001020 UTRAN and
GERAN
Cell Selection and
LBFD-00201803 / Reselection / Cell
NO NO Enumeration Type
TDLBFD-00201803 Selection and Re-
selection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

PS Inter-RAT
LOFD-001020 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001020 UTRAN and
GERAN
 LBFD-00201803 / Cell Selection and
NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection
 PS Inter-RAT
Mobility between E-
LOFD-001020 / UTRAN and
TDLOFD-001020 GERAN
NO NO TDLOFD-001023 SRVCC to GERAN Interval Type
TDLOFD-001034 CS Fallback to
TDLOFD-001053 GERAN
Flash CS Fallback
to GERAN

Cell Selection and

Re-selection
PS Inter-RAT
LBFD-00201803 / Mobility between E-
TDLBFD-00201803 UTRAN and
LOFD-001020 / GERAN
NO NO Interval Type
TDLOFD-001020 Service based
TDLOFD-001046 Inter-RAT handover
TDLOFD-001073 to GERAN
Distance based
Inter-RAT handover
to GERAN

PS Inter-RAT
Mobility between E-
LOFD-001020 / UTRAN and
TDLOFD-001020 GERAN
NO NO TDLOFD-001023 SRVCC to GERAN Interval Type
TDLOFD-001034 CS Fallback to
TDLOFD-001053 GERAN
Flash CS Fallback
to GERAN

NO NO None None Enumeration Type

 LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Enumeration Type
002002

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
 LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

YES NO None None Interval Type

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
LBFD-002009 / GERAN
TDLBFD-002009 Broadcast of
system information

Cell Selection and

LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
LOFD-001020 / Mobility between E-
YES NO Interval Type
TDLOFD-001020 UTRAN and
LBFD-002009 / GERAN
TDLBFD-002009 Broadcast of
system information

YES NO None None Interval Type

 Broadcast of
LBFD-002009 /
system information
TDLBFD-002009
YES NO Coverage Based Interval Type
LBFD-00201801 /
Intra-frequency
TDLBFD-00201801
Handover

Cell Selection and

LBFD-00201803 /
Re-selection
TDLBFD-00201803
NO NO Coverage Based String Type
LBFD-00201801 /
Intra-frequency
TDLBFD-00201801
Handover

Broadcast of
LBFD-002009 /
system information
TDLBFD-002009
NO NO Coverage Based Enumeration Type
LBFD-00201801 /
Intra-frequency
TDLBFD-00201801
Handover

YES NO None None Interval Type

Coverage Based
LBFD-00201801 /
YES NO Intra-frequency String Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
YES NO Intra-frequency String Type
TDLBFD-00201801
Handover

YES NO None None Interval Type

Coverage Based
LBFD-00201801 /
YES NO Intra-frequency Interval Type
TDLBFD-00201801
Handover
 Coverage Based
LBFD-00201801 / Intra-frequency
NO NO TDLBFD-00201801 Handover Enumeration Type
TDLBFD-002018 Mobility
Management
 Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Enumeration Type
TDLBFD-00201801
Handover

Coverage Based
LBFD-00201801 /
NO NO Intra-frequency Enumeration Type
TDLBFD-00201801
Handover

Automatic
NO NO LOFD-002001 Neighbour Relation Enumeration Type
(ANR)

Automatic
NO NO LOFD-002001 Neighbour Relation Enumeration Type
(ANR)
 Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
NO NO String Type
LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
(ANR)

Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
NO NO String Type
LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
(ANR)
 Coverage Based
Intra-frequency
LBFD-00201801 /
Handover
TDLBFD-00201801
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
 Static TDM
LOFD-001099 /
NO NO eICIC/Dynamic Interval Type
LAOFD-081233
TDM eICIC

LOFD- Neighbor cell

NO NO 081225/TDLOFD- Classification Enumeration Type
081225 Management

Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
 Coverage Based
Intra-frequency
LBFD-00201801 / Handover
TDLBFD-00201801 Coverage Based
LBFD-00201802 / Inter-frequency
NO YES Interval Type
TDLBFD-00201802 Handover
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Reselection / Cell
Selection and Re-
selection

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
LOFD-001036 / Intra-frequency
TDLOFD-001036 Handover
LOFD-001037 / Coverage Based
TDLOFD-001037 Inter-frequency
NO YES TDLBFD-00201801 Handover Interval Type
TDLBFD-00201802 Distance Based
TDLBFD-00201804 Inter-frequency
TDLBFD-00201805 Handover
TDLOFD-001050 Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
 Dynamic TDM
NO NO LAOFD-081233 Enumeration Type
eICIC

YES NO None None Interval Type

Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Cell Selection and
TDLBFD-00201802
Re-selection
LBFD-00201803 /
Distance Based
TDLBFD-00201803
Inter-frequency
YES NO LBFD-00201804 / Interval Type
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD
 Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Cell Selection and
TDLBFD-00201802
Re-selection
LBFD-00201803 /
Distance Based
TDLBFD-00201803
Inter-frequency
NO NO LBFD-00201804 / Enumeration Type
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD

Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Cell Selection and
TDLBFD-00201802
Re-selection
LBFD-00201803 /
Distance Based
TDLBFD-00201803
Inter-frequency
NO NO LBFD-00201804 / Interval Type
Handover
TDLBFD-00201804
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD

LBFD-00201803 / Cell Selection and

NO NO Enumeration Type
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection
 LBFD-00201803 / Cell Selection and
NO NO Interval Type
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

NO NO Enumeration Type
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

NO NO Enumeration Type
TDLBFD-00201803 Re-selection
 LBFD-00201803 / Cell Selection and
NO NO Enumeration Type
TDLBFD-00201803 Re-selection

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
YES NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover
 LBFD-00201803 / Cell Selection and
NO NO Enumeration Type
TDLBFD-00201803 Re-selection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection
 LBFD-00201803 / Cell Selection and
NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Enumeration Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection
 Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Cell Selection and
LBFD-00201803 /
Re-selection
TDLBFD-00201803
NO NO Distance Based Enumeration Type
LBFD-00201804 /
Inter-frequency
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Cell Selection and
LBFD-00201803 /
Re-selection
TDLBFD-00201803
NO NO Distance Based Enumeration Type
LBFD-00201804 /
Inter-frequency
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201802
Handover

Cell Selection and

LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection
 Cell Selection and
LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection

Cell Selection and

LBFD-00201803 / Reselection / Cell
NO NO Enumeration Type
TDLBFD-00201803 Selection and Re-
selection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Re-selection

Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO Interval Type
LBFD-00201804 / Distance Based
TDLBFD-00201804 Inter-frequency
Handover
 LOFD-001032 / Intra-LTE Load
NO NO Enumeration Type
TDLOFD-001032 Balancing

NO NO None None Enumeration Type

 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing

LOFD-
Intra-LTE Load
NO NO 001032/TDLOFD- Interval Type
Balancing
001032
 Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Interval Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover
 LOFD-001032 / Intra-LTE Load
NO NO Interval Type
TDLOFD-001032 Balancing

Multi-Band
LBFD-070103 /
NO NO Compatibility Enumeration Type
TDLBFD-00201806
Enhancement

LOFD- Automatic
NO NO 002001/TDLOFD- Neighbour Relation Enumeration Type
002001 (ANR)
 Handover
Enhancement at
Speed Mobility
LOFD-081228
NO NO Handover Enumeration Type
TDLOFD-080205
Enhancement at
Ultra High Speed
Mobility

Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)
 Coverage Based
LBFD-00201802 /
NO NO Inter-frequency Interval Type
TDLBFD-00201802
Handover

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Intra-LTE Backoff
NO NO TDLOFD-081212 Enumeration Type
Load Balancing

Intra-LTE Load
Balancing
LOFD-001032 /
Intra-LTE User
TDLOFD-001032
Number Load
NO NO LOFD-070215 / Enumeration Type
Balancing
TDLOFD-070215
Operator Load
LOFD-070204
Based Intra-LTE
MLB
 Uplink Traffic-based
NO NO TDLOFD-081236 Enumeration Type
MLB to LTE FDD

Uplink Traffic-based
NO NO TDLOFD-081236 Interval Type
MLB to LTE FDD

Automatic
NO NO LOFD-002001 Neighbour Relation Enumeration Type
(ANR)

YES NO None None Interval Type

 Cell Selection and
LBFD-00201803 /
Reselection
TDLBFD-00201803
YES NO Coverage Based Interval Type
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
YES NO Inter-frequency Interval Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

Cell Selection and

LBFD-00201803 /
Re-selection
TDLBFD-00201803
NO NO Coverage Based String Type
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
Handover

Coverage Based
Inter-frequency
LBFD-00201802 /
Handover
TDLBFD-00201802
Distance Based
LBFD-00201804 /
NO NO Inter-frequency Enumeration Type
TDLBFD-00201804
Handover
LBFD-00201805 /
Service Based
TDLBFD-00201805
Inter-frequency
Handover

YES NO None None Interval Type

Coverage Based
LBFD-00201802 /
YES NO Inter-frequency String Type
TDLBFD-00201802
Handover

Coverage Based
LBFD-00201802 /
YES NO Inter-frequency String Type
TDLBFD-00201802
Handover

YES NO None None Interval Type

 Coverage Based
YES NO LBFD-00201802 Inter-frequency Interval Type
Handover

Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Distance Based
LBFD-00201804 / Inter-frequency
NO NO Enumeration Type
TDLBFD-00201804 Handover
LBFD-00201805 / Service Based
TDLBFD-00201805 Inter-frequency
Handover
 LBFD-00201803 / Cell Selection and
NO NO Enumeration Type
TDLBFD-00201803 Re-selection

Coverage Based
Inter-frequency
LBFD-00201802 / Handover
TDLBFD-00201802 Distance Based
LBFD-00201804 / Inter-frequency
TDLBFD-00201804 Handover
NO NO Enumeration Type
LBFD-00201805 / Service Based
TDLBFD-00201805 Inter-frequency
LOFD-002012 / Handover
TDLOFD-002012 Cell Outage
Detection and
Compensation
Automatic
LOFD-002001 / Neighbour Relation
TDLOFD-002001 (ANR)
NO NO Enumeration Type
LOFD-002012 / Cell Outage
TDLOFD-002012 Detection and
Compensation
 Coverage Based
Inter-frequency
LBFD-00201802 / Handover
TDLBFD-00201802 Distance Based
NO NO LBFD-00201804 / Inter-frequency Interval Type
TDLBFD-00201804 Handover
TDLOFD-001050 Mobility between
LTE TDD and LTE
FDD

Automatic
NO NO LOFD-002001 Neighbour Relation Enumeration Type
(ANR)

Coverage Based
LBFD-00201802 /
Inter-frequency
TDLBFD-00201802
NO NO Handover String Type
LOFD-002001 /
Automatic Neighbor
TDLOFD-002001
Relation (ANR)
 Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO String Type
LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
(ANR)
 Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
Distance Based
TDLBFD-00201802
Inter-frequency
LBFD-00201804 /
Handover
NO NO TDLBFD-00201804 Enumeration Type
Service Based
LBFD-00201805 /
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Mobility between
LTE TDD and LTE
FDD

Coverage Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
NO NO Enumeration Type
LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
(ANR)

Coverage Based
NO NO TDLBFD-00201802 Inter-frequency Enumeration Type
Handover

LOFD- Neighbor cell

NO NO 081225/TDLOFD- Classification Enumeration Type
081225 Management
 Automatic
NO NO LOFD-002001 Neighbour Relation Enumeration Type
(ANR)

Coverage Based
Intra-frequency
LBFD-00201801 / Handover
TDLBFD-00201801 Coverage Based
LBFD-00201802 / Inter-frequency
NO YES Interval Type
TDLBFD-00201802 Handover
LBFD-00201803 / Cell Selection and
TDLBFD-00201803 Reselection / Cell
Selection and Re-
selection

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
LOFD-001036 / Intra-frequency
TDLOFD-001036 Handover
LOFD-001037 / Coverage Based
TDLOFD-001037 Inter-frequency
NO YES TDLBFD-00201801 Handover Interval Type
TDLBFD-00201802 Distance Based
TDLBFD-00201804 Inter-frequency
TDLBFD-00201805 Handover
TDLOFD-001050 Service Based
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
 RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
Handover
LOFD-001036
Coverage Based
LOFD-001037
Inter-frequency
TDLBFD-00201801
Handover
TDLBFD-00201802
YES NO Distance Based String Type
TDLBFD-00201804
Inter-frequency
TDLBFD-00201805
Handover
TDLOFD-001050
Service Based
LOFD-070206
Inter-frequency
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing
RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
LOFD-001036 /
Handover
TDLOFD-001036
Coverage Based
LOFD-001037 /
Inter-frequency
TDLOFD-001037
Handover
TDLBFD-00201801
YES NO Distance Based String Type
TDLBFD-00201802
Inter-frequency
TDLBFD-00201804
Handover
TDLBFD-00201805
Service Based
TDLOFD-001050
Inter-frequency
LOFD-070206
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

YES NO None None Interval Type

Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
YES NO Interval Type
LBFD-00201802 / Coverage Based
TDLBFD-00201802 Inter-frequency
Handover
 RAN Sharing with
Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
LOFD-001036 /
Handover
TDLOFD-001036
Coverage Based
LOFD-001037 /
Inter-frequency
TDLOFD-001037
Handover
TDLBFD-00201801
YES NO Distance Based Interval Type
TDLBFD-00201802
Inter-frequency
TDLBFD-00201804
Handover
TDLBFD-00201805
Service Based
TDLOFD-001050
Inter-frequency
LOFD-070206
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
NO NO Enumeration Type
LBFD-00201802 / Coverage Based
TDLBFD-00201802 Inter-frequency
Handover

RAN Sharing with

Common Carrier
RAN Sharing with
Dedicated Carrier
Coverage Based
Intra-frequency
LOFD-001036 /
Handover
TDLOFD-001036
Coverage Based
LOFD-001037 /
Inter-frequency
TDLOFD-001037
Handover
TDLBFD-00201801
NO NO Distance Based Interval Type
TDLBFD-00201802
Inter-frequency
TDLBFD-00201804
Handover
TDLBFD-00201805
Service Based
TDLOFD-001050
Inter-frequency
LOFD-070206
Handover
Mobility between
LTE TDD and LTE
FDD
Hybrid RAN
Sharing

Coverage Based
Intra-frequency
Handover
LBFD-00201801
Coverage Based
YES NO LBFD-00201802 Interval Type
Inter-frequency
LBFD-00201803
Handover
Cell Selection and
Reselection
 Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
YES NO Interval Type
LBFD-00201802 / Coverage Based
TDLBFD-00201802 Inter-frequency
Handover

Coverage Based
LBFD-00201801 / Intra-frequency
TDLBFD-00201801 Handover
NO NO String Type
LBFD-00201802 / Coverage Based
TDLBFD-00201802 Inter-frequency
Handover

Multi-Band
LBFD-070103 /
YES NO Compatibility MultiBand[]
TDLBFD-00201806
Enhancement

YES NO None None Interval Type

 LOFD-00105401 /
NO NO Camp Enumeration Type
TDLOFD-00105401

Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)

YES NO None None Interval Type

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 /
PS Inter-RAT
TDLOFD-001035
Mobility between E-
LOFD-001021 /
YES NO UTRAN and Enumeration Type
TDLOFD-001021
CDMA2000
LOFD-001112 /
MOCN Flexible
TDLOFD-001112
Priority Based
Camping

CS Fallback to
CDMA2000 1xRTT
LOFD-001035 /
PS Inter-RAT
TDLOFD-001035
Mobility between E-
LOFD-001021 /
YES NO UTRAN and Interval Type
TDLOFD-001021
CDMA2000
LOFD-001112 /
MOCN Flexible
TDLOFD-001112
Priority Based
Camping
 CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 S1-flex
NO NO Enumeration Type
TDLOFD-001018 MOCN Flexible
TDLOFD-001112 Priority Based
Camping

CS Fallback to
LOFD-001035 / CDMA2000 1xRTT
TDLOFD-001035 S1-flex
NO NO Interval Type
TDLOFD-001018 MOCN Flexible
TDLOFD-001112 Priority Based
Camping

PS Inter-RAT
Mobility between E-
LOFD-001021 / UTRAN and
NO NO TDLOFD-001021 CDMA2000 Enumeration Type
TDLOFD-001112 MOCN Flexible
Priority Based
Camping

PS Inter-RAT
Mobility between E-
LOFD-001021 / UTRAN and
NO NO TDLOFD-001021 CDMA2000 Interval Type
TDLOFD-001112 MOCN Flexible
Priority Based
Camping

YES NO None None Interval Type

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based Interval Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
 RAN Sharing with
Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Cell Selection and
LOFD-001036
Re-selection
TDLBFD-00201803
NO NO MOCN Flexible Enumeration Type
TDLOFD-001112
Priority Based
LOFD-070206
Camping
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
Cell Selection and
LOFD-001036
Re-selection
TDLBFD-00201803
NO NO MOCN Flexible Interval Type
TDLOFD-001112
Priority Based
LOFD-070206
Camping
Hybrid RAN
Sharing

YES NO None None Interval Type

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping

MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Enumeration Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection
 MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Interval Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection

YES NO None None Interval Type

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping

MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Enumeration Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection

MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Interval Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection

YES NO None None Interval Type

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based Interval Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
 RAN Sharing with
Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
Cell Selection and
TDLOFD-001036
Re-selection
LBFD-00201803 /
NO NO MOCN Flexible Enumeration Type
TDLBFD-00201803
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
Cell Selection and
TDLOFD-001036
Re-selection
LBFD-00201803 /
NO NO MOCN Flexible Interval Type
TDLBFD-00201803
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

YES NO None None Interval Type

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO String Type
TDLOFD-001019 UTRAN and
UTRAN
 PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO String Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
YES NO Interval Type
LOFD-001052 / UTRAN
TDLOFD-001052 Flash CS Fallback
to UTRAN

Flash CS Fallback
LOFD-001052 / to UTRAN
TDLOFD-001052 PS Inter-RAT
YES NO Interval Type
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
UTRAN

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
 PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
LOFD-001019 Flash CS Fallback
TDLOFD-001022 to UTRAN
TDLOFD-001033 PS Inter-RAT
TDLOFD-001052 Mobility between E-
NO NO Interval Type
TDLOFD-001019 UTRAN and
TDLOFD-001043 UTRAN
TDLOFD-001072 Service based
TDLOFD-001078 Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering
PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
SRVCC to UTRAN
CS Fallback to
UTRAN
LOFD-001019 Flash CS Fallback
TDLOFD-001022 to UTRAN
TDLOFD-001033 PS Inter-RAT
TDLOFD-001052 Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
TDLOFD-001043 UTRAN
TDLOFD-001072 Service based
TDLOFD-001078 Inter-RAT handover
to UTRAN
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering

Intra-LTE Load
LOFD-001032 / Balancing
TDLOFD-001032 Inter-RAT Load
NO NO LOFD-001044 / Sharing to UTRAN Enumeration Type
TDLOFD-001044 Multi-RAT Carrier
MRFD-231901 Joint Intelligent
Shutdown(eNodeB)
 LOFD-
002002/TDLOFD-
002002
Inter-RAT ANR
LOFD-
SRVCC to UTRAN
001022/TDLOFD-
CS Fallback to
001022
UTRAN
LOFD-
Flash CS Fallback
001033/TDLOFD-
to UTRAN
001033
PS Inter-RAT
LOFD-
Mobility between E-
NO NO 001052/TDLOFD- Interval Type
UTRAN and
001052
UTRAN
LOFD-
Service based inter-
001019/TDLOFD-
RAT handover to
001019
UTRAN
LOFD-
Distance based
001043/TDLOFD-
inter-RAT handover
001043
to UTRAN
LOFD-
001072/TDLOFD-
001072
 PS Inter-RAT
Mobility between E-
NO NO LOFD-001019 String Type
UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO String Type
TDLOFD-001019 UTRAN and
UTRAN
NO NO LOFD-002002 Inter-RAT ANR Enumeration Type

NO YES None None Interval Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

NO YES None None String Type

NO YES None None Enumeration Type

YES NO None None Interval Type

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping

MOCN Flexible
LOFD-001112 /
YES NO Priority Based Interval Type
TDLOFD-001112
Camping
 MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Enumeration Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection

MOCN Flexible
LOFD-001112 /
Priority Based
TDLOFD-001112
NO NO Camping Interval Type
LBFD-00201803 /
Cell Selection and
TDLBFD-00201803
Re-selection

YES NO None None Interval Type

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based Interval Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing
 RAN Sharing with
Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
MOCN Flexible
TDLOFD-001036
YES NO Priority Based String Type
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
Cell Selection and
TDLOFD-001036
Re-selection
LBFD-00201803 /
NO NO MOCN Flexible Enumeration Type
TDLBFD-00201803
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

RAN Sharing with

Common Carrier
LOFD-001036 /
Cell Selection and
TDLOFD-001036
Re-selection
LBFD-00201803 /
NO NO MOCN Flexible Interval Type
TDLBFD-00201803
Priority Based
TDLOFD-001112
Camping
LOFD-070206
Hybrid RAN
Sharing

YES NO None None Interval Type

 Cell Selection and
Re-selection
LBFD-00201803 / PS Inter-RAT
TDLBFD-00201803 Mobility between E-
LOFD-001019 / UTRAN and
YES NO TDLOFD-001019 UTRAN Interval Type
LBFD-002009 / Broadcast of
TDLBFD-002009 system information
TDLOFD-001078 E-UTRAN to
UTRAN CS/PS
steering

Cell Selection and

LBFD-00201803 / Re-selection
NO NO TDLBFD-00201803 E-UTRAN to Enumeration Type
TDLOFD-001078 UTRAN CS/PS
steering
PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO TDLOFD-001019 UTRAN and Enumeration Type
LOFD-002002 UTRAN
Inter-RAT ANR
 Cell Selection and
Re-selection
LBFD-00201803 / PS Inter-RAT
TDLBFD-00201803 Mobility between E-
NO NO LOFD-001019 / UTRAN and Enumeration Type
TDLOFD-001019 UTRAN
TDLOFD-001078 E-UTRAN to
UTRAN CS/PS
steering
 Cell Selection and
LBFD-00201803 / Re-selection
TDLBFD-00201803 PS Inter-RAT
NO NO Interval Type
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
UTRAN

Cell Selection and

LBFD-00201803 / Reselection / Cell
NO NO Enumeration Type
TDLBFD-00201803 Selection and Re-
selection

LBFD-00201803 / Cell Selection and

TDLBFD-00201803 Re-selection
NO NO LBFD-002009 / Broadcast of Interval Type
TDLBFD-002009 system information
TDLOFD-001018 S1-flex

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection
 PS Inter-RAT
Mobility between E-
LOFD-001019 / UTRAN and
TDLOFD-001019 UTRAN
NO NO TDLOFD-001022 SRVCC to UTRAN Interval Type
TDLOFD-001033 CS Fallback to
TDLOFD-001052 UTRAN
Flash CS Fallback
to UTRAN

Cell Selection and

LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection
 Cell Selection and
LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

LBFD-00201803 / Cell Selection and

NO NO Interval Type
TDLBFD-00201803 Reselection

Cell Selection and

LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection
 Cell Selection and
LBFD-00201803 / Reselection / Cell
NO NO Interval Type
TDLBFD-00201803 Selection and Re-
selection

PS Inter-RAT
Mobility between E-
LOFD-001019 / UTRAN and
NO NO TDLOFD-001019 UTRAN Enumeration Type
TDLOFD-001078 E-UTRAN to
UTRAN CS/PS
steering
 E-UTRAN to
UTRAN CS/PS
LOFD-001078 / Steering
TDLOFD-001078 CS Fallback to
NO NO TDLOFD-001033 UTRAN Enumeration Type
TDLOFD-001052 Flash CS Fallback
TDLOFD-001088 to UTRAN
CS Fallback
Steering to UTRAN

PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
Cell Selection and
Re-selection
LOFD-001019 /
SRVCC to UTRAN
TDLOFD-001019
CS Fallback to
TDLBFD-00201803
UTRAN
TDLOFD-001022
Flash CS Fallback
NO NO TDLOFD-001033 Interval Type
to UTRAN
TDLOFD-001052
Service based
TDLOFD-001043
Inter-RAT handover
TDLOFD-001072
to UTRAN
TDLOFD-001078
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering
 CS Fallback
Steering to UTRAN
PS Inter-RAT
LOFD-001088 / Mobility between E-
TDLOFD-001088 UTRAN and
LOFD-001019 / UTRAN
NO NO TDLOFD-001019 CS Fallback to Enumeration Type
TDLOFD-001033 UTRAN
TDLOFD-001052 Flash CS Fallback
TDLOFD-001078 to UTRAN
E-UTRAN to
UTRAN CS/PS
steering

NO NO None None Enumeration Type

LOFD-
Intra-LTE Load
NO NO 001032/TDLOFD- Interval Type
Balancing
001032
 Multi-Band
LBFD-070103 /
NO NO Compatibility Enumeration Type
TDLBFD-00201806
Enhancement

LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Enumeration Type
002002
 LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002

SRVCC Flexible
NO NO LOFD-001087 Enumeration Type
Steering to UTRAN
NO NO None None Enumeration Type

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO String Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO String Type
TDLOFD-001019 UTRAN and
UTRAN

LOFD-001052 / Flash CS Fallback

YES NO Interval Type
TDLOFD-001052 to UTRAN
 PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN
 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
UTRAN
NO NO None None Interval Type

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
UTRAN

PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Enumeration Type
TDLOFD-001019 UTRAN and
UTRAN
 PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
CS Fallback to
LOFD-001019 /
GERAN
TDLOFD-001019
Flash CS Fallback
LOFD-001034 /
to UTRAN
TDLOFD-001034
CS Fallback to
LOFD-001052 /
NO NO UTRAN Interval Type
TDLOFD-001052
Service based
TDLOFD-001033
Inter-RAT handover
TDLOFD-001043
to UTRAN
TDLOFD-001072
Distance based
TDLOFD-001078
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
steering

PS Inter-RAT
LOFD-001019 / Mobility between E-
YES NO Interval Type
TDLOFD-001019 UTRAN and
UTRAN

SRVCC to UTRAN
LOFD-001022 /
CS Fallback with
TDLOFD-001022
LAI to UTRAN
YES NO LOFD-001068 / Interval Type
E-UTRAN to
TDLOFD-001068
UTRAN CS/PS
TDLOFD-001078
steering
 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO String Type
TDLOFD-001019 UTRAN and
UTRAN

SRVCC to UTRAN
PS Inter-RAT
LOFD-001022 /
Mobility between E-
TDLOFD-001022
UTRAN and
NO NO LOFD-001019 / Enumeration Type
UTRAN
TDLOFD-001019
E-UTRAN to
TDLOFD-001078
UTRAN CS/PS
steering

Multi-Band
LBFD-070103 /
YES NO Compatibility MultiBand[]
TDLBFD-00201806
Enhancement

YES NO None None Interval Type

 LOFD-00105401 /
NO NO Camp Enumeration Type
TDLOFD-00105401

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
LOFD-002002

YES NO None None Interval Type

YES NO None None Interval Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type

NO NO None None Enumeration Type

 LOFD- Cell Outage
NO NO 002012/TDLOFD- Detection and Interval Type
002012 Compensation

NO NO None None Bit Field Type

 Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
special subframe
configuration type 7
TDLBFD-001007
Optional uplink-
TDLBFD-00100701
downlink subframe
TDLBFD-00100702
configuration
TDLOFD-001026
uplink-downlink
NO NO TDLOFD-00102601 Interval Type
subframe
TDLOFD-00102602
configuration type 0
TDLOFD-00102603
uplink-downlink
MRFD-101231
special subframe
MRFD-101222
configuration type 4
uplink-downlink
special subframe
configuration type 5
FDD+TDD Carrier
Aggregation(LTE
TDD)
FDD+TDD Carrier
Aggregation(LTE
FDD)

FDD+TDD Carrier
Aggregation(LTE
MRFD-101231 TDD)
NO NO Interval Type
MRFD-101222 FDD+TDD Carrier
Aggregation(LTE
FDD)

NO NO None None Interval Type

NO NO None None Enumeration Type

Inter-eNodeB DL
NO NO TDLAOFD-081411 CoMP based on Interval Type
Relaxed backhaul

Inter-eNodeB DL
NO NO TDLAOFD-081411 CoMP based on Enumeration Type
Relaxed backhaul
 Inter-eNodeB DL
NO NO TDLAOFD-081411 CoMP based on Interval Type
Relaxed backhaul

Inter-eNodeB DL
NO NO TDLAOFD-081411 CoMP based on Enumeration Type
Relaxed backhaul

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Enumeration Type

Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)
 Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO String Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)
 Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO String Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO YES Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO YES Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)
 Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)
Automatic
Congestion Handler
LOFD-081205
NO YES Automatic Interval Type
TDLOFD-081209
Congestion
Handler(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO String Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)
 Automatic
Congestion
LOFD-081205 Handling
NO NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO YES Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
YES NO Interval Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

Automatic
Congestion
LOFD-081205 Handling
NO NO Enumeration Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

YES NO None None String Type

YES NO None None String Type

YES NO None None Enumeration Type

NO NO None None Enumeration Type

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
YES NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
NO NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
NO NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
LAOFD-00100101 Inter-Band Carrier
LAOFD-00100102 Aggregation for
LAOFD-00100201 / Downlink 2CC in
TDLAOFD-001002 20MHz
LAOFD-00100202 / Carrier Aggregation
NO NO Interval Type
TDLAOFD- for Downlink 2CC in
00100102 40MHz
LAOFD-070201 / Support of UE
TDLAOFD-070201 Category 6
LAOFD-070202 Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

YES NO None None Interval Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
YES NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
YES NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
NO NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
NO NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 Carrier Aggregation
NO NO Interval Type
LAOFD-00100202 for Downlink 2CC in
LAOFD-070201 40MHz
LAOFD-070202 Support of UE
Category 6
Flexible CA from
Multiple Carriers
Inter-eNodeB CA
based on
Coordinated BBU
 Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control and Video Interval Type
081203 Service Rate
Adaption

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Enumeration Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Enumeration Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR
 LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Interval Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002
 LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Enumeration Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Interval Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Interval Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR
 PCI Collision
LOFD-002007 /
NO NO Detection & Self- Enumeration Type
TDLOFD-002007
Optimization

PCI Collision
LOFD-002007 /
NO NO Detection & Self- Compound Type
TDLOFD-002007
Optimization
 PCI Collision
LOFD-002007 /
NO NO Detection & Self- Compound Type
TDLOFD-002007
Optimization

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)

LOFD-002001 /
Automatic
TDLOFD-002001
Neighbour Relation
NO NO LOFD- Enumeration Type
(ANR)
002002/TDLOFD-
Inter-RAT ANR
002002
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)
 SRVCC to UTRAN
SRVCC to GERAN
LOFD-001022 / CS Fallback to
TDLOFD-001022 UTRAN
LOFD-001023 / CS Fallback to
TDLOFD-001023 GERAN
LOFD-001033 / CS Fallback to
TDLOFD-001033 CDMA2000 1xRTT
LOFD-001034 / PS Inter-RAT
TDLOFD-001034 Mobility between E-
LOFD-001035 / UTRAN and
TDLOFD-001035 UTRAN
LOFD-001019 / PS Inter-RAT
TDLOFD-001019 Mobility between E-
LOFD-001020 / UTRAN and
NO NO Enumeration Type
TDLOFD-001020 GERAN
LOFD-001021 / PS Inter-RAT
TDLOFD-001021 Mobility between E-
LOFD-001032 / UTRAN and
TDLOFD-001032 CDMA2000
LOFD-001044 / Intra-LTE Load
TDLOFD-001044 Balancing
LOFD-001045 / Inter-RAT Load
TDLOFD-001045 Sharing to UTRAN
LOFD-002001 / Inter-RAT Load
TDLOFD-002001 Sharing to GERAN
LOFD-002002 / Automatic
TDLOFD-002002 Neighbour Relation
(ANR)
Inter-RAT ANR
 Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR);

Automatic
LOFD-002001 /
NO NO Neighbour Relation Enumeration Type
TDLOFD-002001
(ANR)
 LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
 LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
 LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Bit Field Type
002002
 LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Interval Type
002002

LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Interval Type
002002
 LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Bit Field Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Bit Field Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR
 LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Interval Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR

Automatic
LOFD-002001 /
NO NO Neighbour Relation Interval Type
TDLOFD-002001
(ANR)
 LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-
002002/TDLOFD-
002002
LOFD- Inter-RAT ANR;
001022/TDLOFD- SRVCC to UTRAN;
001022 CS Fallback to
LOFD- UTRAN;
001033/TDLOFD- Flash CS Fallback
001033 to UTRAN;
LOFD- Flash CS Fallback
001052/TDLOFD- to GERAN;
001052 PS Inter-RAT
NO NO Interval Type
LOFD- Mobility between E-
001053/TDLOFD- UTRAN and
001053 UTRAN;
LOFD- Service based inter-
001019/TDLOFD- RAT handover to
001019 UTRAN;
LOFD- Distance based
001043/TDLOFD- inter-RAT handover
001043 to UTRAN;
LOFD-
001072/TDLOFD-
001072

LOFD- Neighbor cell

NO NO 081225/TDLOFD- Classification Interval Type
081225 Management
 LOFD- Neighbor cell
NO NO 081225/TDLOFD- Classification Interval Type
081225 Management

YES NO None None Interval Type

NO NO None None Enumeration Type

LOFD-001024 / Remote Electrical

NO NO Interval Type
TDLOFD-001024 Tilt Control

LOFD-001024 / Remote Electrical

YES NO Interval Type
TDLOFD-001024 Tilt Control
 LOFD-001024 / Remote Electrical
NO NO Interval Type
TDLOFD-001024 Tilt Control

LOFD-001024 / Remote Electrical

NO NO String Type
TDLOFD-001024 Tilt Control

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

NO NO None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Enumeration Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

NO YES None None Interval Type

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Interval Type
TDLOFD-002002

LOFD-002002 /
NO NO Inter-RAT ANR Enumeration Type
TDLOFD-002002
 Busy-Hour
LOFD- Download Rate
YES NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video String Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Enumeration Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
YES NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption
Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption

MRFD-101401 / UL Unified Video

NO NO Interval Type
MRFD-101401 Steering
 UL Unified Video
NO NO MRFD-101401 Interval Type
Steering

Busy-Hour
LOFD- Download Rate
YES NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption

Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Enumeration Type
081203 Service Rate
Adaption
 Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Enumeration Type
081203 Service Rate
Adaption

Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption

Busy-Hour
LOFD- Download Rate
NO NO 081202/LOFD- Control/Video Interval Type
081203 Service Rate
Adaption
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Enumeration Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101
Downlink 2CC in
LAOFD-00100102
20MHz
LAOFD-00100201 /
Carrier Aggregation
TDLAOFD-001002
for Downlink 2CC in
LAOFD-00100202 /
40MHz
TDLAOFD-
Support of UE
NO NO 00100102 Enumeration Type
Category 6
LAOFD-070201 /
Flexible CA from
TDLAOFD-070201
Multiple Carriers
LAOFD-070202
Inter-eNodeB CA
TDLAOFD-
based on
00100111
Coordinated BBU
LAOFD-081236
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
FDD+TDD Carrier
Aggregation

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

YES NO None None Interval Type

 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
YES NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz
 Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LAOFD-00100101 Aggregation for
LAOFD-00100102 Downlink 2CC in
LAOFD-00100201 / 20MHz
TDLAOFD-001002 Carrier Aggregation
LAOFD-00100202 / for Downlink 2CC in
TDLAOFD- 40MHz
NO NO Interval Type
00100102 Support of UE
LAOFD-070201 / Category 6
TDLAOFD-070201 Flexible CA from
LAOFD-070202 Multiple Carriers
TDLAOFD- Inter-eNodeB CA
00100111 based on
Coordinated BBU
Intra-band Carrier
Aggregation for
Downlink 2CC in
30MHz

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

NO YES None None Enumeration Type

LBFD-002009 / Broadcast of
NO NO Enumeration Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Compound Type
TDLBFD-002009 system information

LBFD-002009 / Broadcast of
NO NO Interval Type
TDLBFD-002009 system information

Coordinated
Scheduling based
NO NO LOFD-070208 Enumeration Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Enumeration Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Enumeration Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)
 Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Enumeration Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)

Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)
 Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB))

Coordinated
Scheduling based
Power
LOFD-070208 Control(Cloud BB);
NO NO Interval Type
TDLOFD-080203 Coordinated
Scheduling based
Power Control
(Cloud BB)
 Coordinated
Scheduling based
NO NO LOFD-070208 Interval Type
Power
Control(Cloud BB)

Coordinated
Scheduling based
NO NO TDLOFD-080203 Bit Field Type
Power Control
(Cloud BB)

YES NO None None Interval Type

YES NO None None IP Address Type

NO NO None None Interval Type

NO NO None None Enumeration Type

Specified PCI
LOFD-081207 / Group Based
YES NO Interval Type
TDLOFD-081207 Neighboring Cell
Management
Specified PCI
LOFD-081207 / Group Based
YES NO Interval Type
TDLOFD-081207 Neighboring Cell
Management
 Specified PCI
LOFD-081207 / Group Based
NO NO Interval Type
TDLOFD-081207 Neighboring Cell
Management
TDLBFD-00201802 GERAN
LBFD-00201804 / CS Fallback to
TDLBFD-00201804 CDMA2000 1xRTT
LBFD-00201805 / Flash CS Fallback
TDLBFD-00201805 to UTRAN
LOFD-001033 / Flash CS Fallback
TDLOFD-001033 to GERAN
LOFD-001034 / CS Fallback
TDLOFD-001034 Steering to UTRAN
LOFD-001035 / CS Fallback
TDLOFD-001035 Steering to GERAN
LOFD-001052 / Enhanced CS
TDLOFD-001052 Fallback to
LOFD-001053 / CDMA2000 1xRTT
TDLOFD-001053 PS Inter-RAT
LOFD-001088 / Mobility between E-
TDLOFD-001088 UTRAN and
LOFD-001089 / UTRAN
TDLOFD-001089 PS Inter-RAT
NO NO Bit Field Type
LOFD-001090 / Mobility between E-
TDLOFD-001090 UTRAN and
LOFD-001019 / GERAN
TDLOFD-001019 Service based inter-
LOFD-001020 / RAT handover to
TDLOFD-001020 UTRAN
LOFD-001043 / Service based inter-
TDLOFD-001043 RAT handover to
LOFD-001046 / GERAN
TDLOFD-001046 Distance based
LOFD-001072 / inter-RAT handover
TDLOFD-001072 to UTRAN
LOFD-001073 / Distance based
TDLOFD-001073 inter-RAT handover
TDLBFD-002018 to GERAN
TDLOFD-001022 Mobility
TDLOFD-070228 Management
LOFD-081283 / Coverage Based
TDLOFD-081203 Inter-frequency
 SRVCC to UTRAN
SRVCC to GERAN
CS Fallback to
UTRAN
CS Fallback to
GERAN
PS Inter-RAT
LOFD-001022 / Mobility between E-
TDLOFD-001022 UTRAN and
LOFD-001023 / UTRAN
TDLOFD-001023 PS Inter-RAT
LOFD-001033 / Mobility between E-
TDLOFD-001033 UTRAN and
LOFD-001034 / GERAN
TDLOFD-001034 PS Inter-RAT
LOFD-001019 / Mobility between E-
TDLOFD-001019 UTRAN and
NO NO Bit Field Type
LOFD-001020 / CDMA2000
TDLOFD-001020 Flash CS Fallback
LOFD-001021 / to UTRAN
TDLOFD-001021 CS Fallback
TDLOFD-001052 Steering to UTRAN
TDLOFD-001088 Service based
TDLOFD-001043 Inter-RAT handover
TDLOFD-001072 to UTRAN
TDLOFD-001046 Distance based
TDLOFD-001073 Inter-RAT handover
to UTRAN
Service based
Inter-RAT handover
to GERAN
Distance based
Inter-RAT handover
to GERAN
 Downlink Static
Inter-Cell
Interference
LBFD-00202201 /
Coordination
NO NO TDLBFD-00202201 Enumeration Type
Downlink Dynamic
LOFD-00101401
Inter-Cell
Interference
Coordination
 LOFD-002001 / Automatic
TDLOFD-002001 Neighbour Relation
NO NO Bit Field Type
LOFD-002002 / (ANR)
TDLOFD-002002 Inter-RAT ANR
 Admission Control
Congestion Control
Radio/transport
LBFD-002023 /
resource pre-
TDLBFD-002023
emption
LBFD-002024 /
PS Inter-RAT
TDLBFD-002024
Mobility between E-
LOFD-00102901 /
UTRAN and
TDLOFD-00102901
NO NO UTRAN Bit Field Type
LOFD-001019 /
PS Inter-RAT
TDLOFD-001019
Mobility between E-
LOFD-001020 /
UTRAN and
TDLOFD-001020
GERAN
LOFD-001021 /
PS Inter-RAT
TDLOFD-001021
Mobility between E-
UTRAN and
CDMA2000
 LOFD-002005 / Mobility Robust
NO NO Bit Field Type
TDLOFD-002005 Optimization (MRO)

Dynamic
NO NO LOFD-00101502 Enumeration Type
Scheduling

TCP Proxy
LOFD-001026 Enhancer (TPE)
NO NO Bit Field Type
TDLOFD-001028 TCP Proxy
Enhancer (TPE)
 LOFD-00105401 /
NO NO Camp Enumeration Type
TDLOFD-00105401

Uplink Static Inter-

Cell Interference
LBFD-00202202 / Coordination
NO NO TDLBFD-00202202 Uplink Dynamic Enumeration Type
LOFD-00101402 Inter-Cell
Interference
Coordination
 LOFD-001047 / LoCation
NO NO Bit Field Type
TDLOFD-001047 Services(LCS)
 Transport
LOFD-00301102 /
NO NO Differentiated Flow Bit Field Type
TDLOFD-00301102
Control

PCI Collision
LOFD-002007 /
NO NO Detection & Self- Enumeration Type
TDLOFD-002007
Optimization

LOFD-001070 / Symbol Power

NO NO Bit Field Type
TDLOFD-001070 Saving
 LOFD-001034 / CS Fallback to
TDLOFD-001034 GERAN
LOFD-001052 / Flash CS Fallback
NO NO Bit Field Type
TDLOFD-001052 to UTRAN
LOFD-001053 / Flash CS Fallback
TDLOFD-001053 to GERAN

Automatic
LOFD-002001 /
Neighbour Relation
TDLOFD-002001
(ANR)
LOFD-002002 /
Inter-RAT ANR
TDLOFD-002002
RAN Sharing with
NO NO LOFD-001036 / Bit Field Type
Common Carrier
TDLOFD-001036
RAN Sharing with
LOFD-001037 /
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing
 SRVCC Flexible
Steering to UTRAN
E-UTRAN to
LOFD-001087
UTRAN CS/PS
LOFD-001078 /
Steering
TDLOFD-001078
SRVCC to UTRAN
NO NO TDLOFD-001022 Bit Field Type
CS Fallback to
TDLOFD-001033
UTRAN
TDLOFD-001052
Flash CS Fallback
TDLOFD-001088
to UTRAN
CS Fallback
Steering to UTRAN

LOFD-001092 /
NO NO CMAS Support Enumeration Type
TDLOFD-001092

NO NO None None Enumeration Type

 Radio/transport
LOFD-00102901 /
NO NO resource pre- Bit Field Type
TDLOFD-00102901
emption

SRVCC to UTRAN
SRVCC Flexible
Steering to UTRAN
CS Fallback to
UTRAN
Flash CS Fallback
to UTRAN
LOFD-001022
CS Fallback with
LOFD-001087
LAI to UTRAN
LOFD-001033
CS Fallback
LOFD-001052
Steering to UTRAN
LOFD-001068
NO NO PS Inter-RAT Bit Field Type
LOFD-001088
Mobility between E-
LOFD-001019
UTRAN and
LOFD-001043
UTRAN
LOFD-001072
Service based inter-
LOFD-001078
RAT
Distance based
Inter-RAT handover
to UTRAN
E-UTRAN to
UTRAN CS/PS
Steering
 UL CoMP based on
Coordinated BBU
Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
LOFD-070223
Aggregation for
LAOFD-00100101
Downlink 2CC in
LAOFD-00100102
20MHz
LAOFD-001002 /
Carrier Aggregation
TDLAOFD-001002
for Downlink 2CC in
LAOFD-00100202 /
40MHz
TDLAOFD-
Support of UE
NO NO 00100202 Bit Field Type
Category 6
LAOFD-070201 /
Flexible CA from
TDLAOFD-070201
Multiple Carriers
LAOFD-070202
Inter-eNodeB CA
TDLAOFD-
based on
00100111
Coordinated BBU
LOFD-081219
Intra-band Carrier
TDLOFD-081207
Aggregation for
Downlink 2CC in
30MHz
UL CoMP based on
relaxed backhaul
UL CoMP based on
Coordinated BBU

LOFD-001047 / LoCation
NO NO Bit Field Type
TDLOFD-001047 Services(LCS)
 Coverage Based
Inter-frequency
Handover
LBFD-00201802 /
PS Inter-RAT
TDLBFD-00201802
Mobility between E-
LOFD-001019 /
NO NO UTRAN and Bit Field Type
TDLOFD-001019
UTRAN
LOFD-001020 /
PS Inter-RAT
TDLOFD-001020
Mobility between E-
UTRAN and
GERAN
 Coverage Based
Inter-frequency
Handover
Service Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
LBFD-00201805 / Support of
TDLBFD-00201805 aperiodic CQI
LBFD-002031 / reports
TDLBFD-002031 PS Inter-RAT
LOFD-001019 / Mobility between E-
NO NO Bit Field Type
TDLOFD-001019 UTRAN and
LOFD-001020 / UTRAN
TDLOFD-001020 PS Inter-RAT
TDLOFD-001022 Mobility between E-
TDLOFD-001023 UTRAN and
LAOFD-00100201 / GERAN
TDLAOFD-001002 SRVCC to UTRAN
SRVCC to GERAN
Carrier Aggregation
for Downlink 2CC in
40MHz
 LOFD-
NO NO 002002/TDLOFD- Inter-RAT ANR Bit Field Type
002002

Coordinated
Scheduling based
NO NO LOFD-070208 Enumeration Type
Power
Control(Cloud BB)

eCoordinator based
RIM process
optimization
MRFD-090211
Flash CS Fallback
LOFD-
to UTRAN
001052/TDLOFD-
PS Inter-RAT
001052
Mobility between E-
LOFD-
UTRAN and
001019/TDLOFD-
UTRAN
NO NO 001019 Enumeration Type
Inter-RAT Load
LOFD-
Sharing to
001044/TDLOFD-
UTRAN(based on
001044
UMTS cell load
LOFD-
information)
001033/TDLOFD-
CS Fallback to
001033
UTRAN (based on
UMTS cell load
information)
NO NO None None Enumeration Type

Intra-Band Carrier
Aggregation for
Downlink 2CC in
20MHz
Inter-Band Carrier
Aggregation for
LAOFD-00100101 Downlink 2CC in
LAOFD-00100102 20MHz
LAOFD-00100201 / Carrier Aggregation
TDLAOFD-001002 for Downlink 2CC in
LAOFD-00100202 / 40MHz
TDLAOFD- Support of UE
00100102 Category 6
LAOFD-070201 / Flexible CA from
TDLAOFD-070201 Multiple Carriers
LAOFD-070202 Inter-eNodeB CA
NO NO Bit Field Type
TDLAOFD- based on
00100111 Coordinated BBU
LAOFD-080202 Intra-band Carrier
LAOFD-080201 Aggregation for
LBFD- Downlink 2CC in
00201805/TDLBFD 30MHz
-00201805 Carrier Aggregation
LOFD- for Uplink 2CC
00105401/TDLOFD Inter-eNodeB CA
-00105401 based on relaxed
backhaul
Service Based
Inter-frequency
Handover
Camp & Handover
Based on SPID
 LOFD-001032 / Intra-LTE Load
NO NO Bit Field Type
TDLOFD-001032 Balancing
 Distance Based
Inter-frequency
Handover
Service Based
LBFD-00201802 / Inter-frequency
TDLBFD-00201802 Handover
LBFD-00201804 / CS Fallback to
TDLBFD-00201804 UTRAN
LBFD-00201805 / PS Inter-RAT
TDLBFD-00201805 Mobility between E-
LOFD-001019 / UTRAN and
TDLOFD-001019 GERAN
LOFD-001020 / Service based inter-
NO NO Bit Field Type
TDLOFD-001020 RAT handover to
LOFD-001043 / UTRAN
TDLOFD-001043 Service based inter-
LOFD-001046 / RAT handover to
TDLOFD-001046 GERAN
LOFD-001072 / Distance based
TDLOFD-001072 inter-RAT handover
LOFD-001073 / to UTRAN
TDLOFD-001073 Distance based
inter-RAT handover
to GERAN
Mobility
Management
 PS Inter-RAT
Mobility between E-
UTRAN and
UTRAN
PS Inter-RAT
LOFD-001019 /
Mobility between E-
TDLOFD-001019
UTRAN and
LOFD-001020 /
GERAN
TDLOFD-001020
Service based
LOFD-001043 /
Inter-RAT handover
TDLOFD-001043
to UTRAN
LOFD-001046 /
Service based
NO NO TDLOFD-001046 Bit Field Type
Inter-RAT handover
LOFD-001072 /
to GERAN
TDLOFD-001072
Distance based
LOFD-001073 /
Inter-RAT handover
TDLOFD-001073
to UTRAN
LOFD-001078
Distance based
LOFD-002015 /
Inter-RAT handover
TDLOFD-002015
to GERAN
E-UTRAN to
UTRAN CS/PS
Steering
RACH Optimization
 LOFD-00101502 / Dynamic
NO NO Bit Field Type
TDLOFD-00101502 Scheduling

Random Access
NO NO LBFD-002010 Enumeration Type
Procedure
 LOFD-001007 /
NO NO High Speed Mobility Enumeration Type
TDLOFD-001007

NO NO None None Bit Field Type

LOFD-
002002/TDLOFD-
002002
LOFD- Inter-RAT ANR
001022/TDLOFD- SRVCC to UTRAN
001022 CS Fallback to
LOFD- UTRAN
001033/TDLOFD- Flash CS Fallback
001033 to UTRAN
LOFD- Flash CS Fallback
001052/TDLOFD- to GERAN
001052 PS Inter-RAT
NO NO Bit Field Type
LOFD- Mobility between E-
001053/TDLOFD- UTRAN and
001053 UTRAN
LOFD- Service based inter-
001019/TDLOFD- RAT handover to
001019 UTRAN
LOFD- Distance based
001043/TDLOFD- inter-RAT handover
001043 to UTRAN
LOFD-
001072/TDLOFD-
001072
NO NO None None Enumeration Type

NO NO None None Bit Field Type

LOFD-002015 /
NO NO RACH Optimization Enumeration Type
TDLOFD-002015
 Automatic
Congestion
LOFD-081205 Handling
NO NO Bit Field Type
TDLOFD-081209 Automatic
Congestion
Handling(TDD)

NO NO None None Enumeration Type

Cell Outage
LOFD-002012 /
NO NO Detection and Bit Field Type
TDLOFD-002012
Compensation

PCI Collision
LOFD-002007 /
NO NO Detection & Self- Bit Field Type
TDLOFD-002007
Optimization
 CA UE Load
NO NO TDLOFD-081219 Bit Field Type
Balancing

NO NO None None Enumeration Type

NO NO None None Enumeration Type

NO NO None None Bit Field Type
NO NO None None Interval Type
NO NO None None Interval Type
 CA UE Load
NO NO TDLOFD-081219 Enumeration Type
Balancing

CA UE Load
NO NO TDLOFD-081219 Interval Type
Balancing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
NO NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
NO NO LOFD-001037 / Enumeration Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing
 RAN Sharing with
LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
YES NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
TDLOFD-001036
RAN Sharing with
NO NO LOFD-001037 / Interval Type
Dedicated Carrier
TDLOFD-001037
Hybrid RAN
LOFD-070206
Sharing

RAN Sharing with

LOFD-001036 /
Common Carrier
NO NO TDLOFD-001036 Interval Type
Hybrid RAN
LOFD-070206
Sharing

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Enumeration Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

LOFD-002005 / Mobility Robust

NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)
 LOFD-002005 / Mobility Robust
NO NO Interval Type
TDLOFD-002005 Optimization(MRO)

YES NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Enumeration Type

LOFD-001026 / TCP Proxy

NO NO Enumeration Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)
 LOFD-001026 / TCP Proxy
NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Enumeration Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)
 Basic uplink-
downlink subframe
configuration
uplink-downlink
subframe
configuration
type1&2
uplink-downlink
TDLBFD-001007
special subframe
TDLBFD-00100701
configuration type 7
TDLBFD-00100702
Optional uplink-
NO NO TDLOFD-001026 Interval Type
downlink subframe
TDLOFD-00102601
configuration
TDLOFD-00102602
uplink-downlink
TDLOFD-00102603
subframe
configuration type 0
uplink-downlink
special subframe
configuration type 4
uplink-downlink
special subframe
configuration type 5

LBFD-002008 / Radio Bearer

NO NO Enumeration Type
TDLBFD-002008 Management
NO NO None None Enumeration Type

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)
 LOFD-001026 / TCP Proxy
NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

LOFD-001026 / TCP Proxy

NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)
 LOFD-001026 / TCP Proxy
NO NO Interval Type
TDLOFD-001028 Enhancer(TPE)

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type
NO NO None None Interval Type

LBFD-004014 / License
NO NO Interval Type
TDLBFD-004014 Management

LBFD-004014 / License
NO NO Interval Type
TDLBFD-004014 Management

LBFD-004014 / License
NO NO Interval Type
TDLBFD-004014 Management

LBFD-004014 / License
NO NO Interval Type
TDLBFD-004014 Management
NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type
NO NO None None Bit Field Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

NO NO None None Interval Type

LOFD-001025 / Adaptive Power

NO NO Enumeration Type
TDLOFD-001025 Consumption

LOFD-001025 / Adaptive Power

NO NO Compound Type
TDLOFD-001025 Consumption
 LOFD-001025 / Adaptive Power
NO NO Compound Type
TDLOFD-001025 Consumption

NO YES None None Enumeration Type

NO NO None None Interval Type
NO NO None None Interval Type
 Intelligent Access
LOFD-070207 /
Class Control
TDLOFD-070207
NO NO Dynamic Service Enumeration Type
LOFD-008002 /
Specific Access
TDLOFD-008002
Control(SSAC)

Intelligent Access
LOFD-070207 /
Class Control
TDLOFD-070207
NO NO Dynamic Service Interval Type
LOFD-008002 /
Specific Access
TDLOFD-008002
Control(SSAC)
 Enumeration Actual Value
GUI Value Range Unit Default Value
Number/Bit Range

0~5 N/A None 0~5 None

10~254 N/A None 10~254 None

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~5 N/A None 0~5 None

EUTRAN_TDD, EUTRAN_TDD~1, EUTRAN_TDD,

EUTRAN_FDD, EUTRAN_FDD~2, None EUTRAN_FDD, EUTRAN
EUTRAN EUTRAN~3 EUTRAN
EUTRAN_TDD, EUTRAN_TDD~1, EUTRAN_TDD,
EUTRAN_FDD, EUTRAN_FDD~2, None EUTRAN_FDD, NULL
NULL NULL~4 NULL

-100,-20~20 N/A dBm -100,-20~20 0

-100,-20~20 N/A dBm -100,-20~20 0

-100,-20~20 N/A dBm -100,-20~20 0

-100,-20~20 N/A dBm -100,-20~20 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~5 N/A None 0~5 None

1~256 N/A None 1~256 None

NOT_CFG(NOT_C NOT_CFG~0, NOT_CFG(NOT_C

None NOT_CFG, CFG
FG), CFG(CFG) CFG~1 FG)

0~255 N/A None 0~255 0

0~5 N/A None 0~5 None

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4, QCI1, QCI2, QCI3,
QCI5(QCI 5), QCI5~5, QCI6~6, None QCI4, QCI5, QCI6, None
QCI6(QCI 6), QCI7~7, QCI8~8, QCI7, QCI8, QCI9
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)
0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

SERVICE_HO_QCI
_ALLOWED(QCI SERVICE_HO_QCI
SERVICE_HO_QCI
Bear Allowed), _ALLOWED~0, SERVICE_HO_QCI
_ALLOWED,
SERVICE_HO_QCI SERVICE_HO_QCI None _ALLOWED(QCI
SERVICE_HO_QCI
_NOT_ALLOWED( _NOT_ALLOWED~ Bear Allowed)
_NOT_ALLOWED
QCI Bear Not 1
Allowed)

0~5 N/A None 0~5 None

 UTRAN~0,
UTRAN, GERAN, UTRAN, GERAN,
GERAN~1, None UTRAN
CDMA2000 CDMA2000
CDMA2000~2
 UTRAN~0,
UTRAN, GERAN, GERAN~1, UTRAN, GERAN,
None GERAN
CDMA2000, NULL CDMA2000~2, CDMA2000, NULL
NULL~3
 UTRAN~0,
UTRAN, GERAN, GERAN~1, UTRAN, GERAN,
None CDMA2000
CDMA2000, NULL CDMA2000~2, CDMA2000, NULL
NULL~3

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

 UTRAN~0,
UTRAN, GERAN, UTRAN, GERAN,
GERAN~1, None UTRAN
CDMA2000 CDMA2000
CDMA2000~2

UTRAN~0,
UTRAN, GERAN, GERAN~1, UTRAN, GERAN,
None GERAN
CDMA2000, NULL CDMA2000~2, CDMA2000, NULL
NULL~3
 UTRAN~0,
UTRAN, GERAN, GERAN~1, UTRAN, GERAN,
None CDMA2000
CDMA2000, NULL CDMA2000~2, CDMA2000, NULL
NULL~3

OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

REDIRECTION~0, REDIRECTION:On,
REDIRECTION, REDIRECTION,
CCO_HO~1, None CCO_HO:On,
CCO_HO, PS_HO CCO_HO, PS_HO
PS_HO~2 PS_HO:On

REDIRECTION~0, REDIRECTION:On,
REDIRECTION, REDIRECTION,
CCO_HO~1, None CCO_HO:On,
CCO_HO, PS_HO CCO_HO, PS_HO
PS_HO~2 PS_HO:On
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~15 N/A None 1~15 2

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~255 N/A None 0~255 None

EUTRAN~0,
UTRAN~1,
EUTRAN, UTRAN, EUTRAN, UTRAN,
GERAN~2,
GERAN, GERAN,
CDMA20001XRTT~ None None
CDMA20001XRTT, CDMA20001XRTT,
3,
CDMA2000HRPD CDMA2000HRPD
CDMA2000HRPD~
4

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~7 N/A None 0~7 0

GSM_dcs1800, GSM_dcs1800~0, GSM_dcs1800,

None GSM_dcs1800
GSM_pcs1900 GSM_pcs1900~1 GSM_pcs1900
0~5 N/A None 0~5 None

0~9 N/A None 0~9 None

0~7 N/A None 0~7 None

0~46589,54436~65 0~46589,54436~65
N/A None 0
535 535

0~7 N/A None 0~7 3

0~5 N/A None 0~5 None

0~9 N/A None 0~9 None

NO_HO, NO_HO~0, NO_HO,
None NO_HO
PERMIT_HO PERMIT_HO~1 PERMIT_HO

0~46589,54436~65 0~46589,54436~65
N/A None 0
535 535

10~20000 N/A ms 10~20000 3000

0ms(0ms),
40ms(40ms), 0ms~0, 40ms~1,
64ms(64ms), 64ms~2, 80ms~3,
80ms(80ms), 100ms~4,
100ms(100ms), 128ms~5, 0ms, 40ms, 64ms,
128ms(128ms), 160ms~6, 80ms, 100ms,
160ms(160ms), 256ms~7, 128ms, 160ms,
256ms(256ms), 320ms~8, 256ms, 320ms,
ms 640ms(640ms)
320ms(320ms), 480ms~9, 480ms, 512ms,
480ms(480ms), 512ms~10, 640ms, 1024ms,
512ms(512ms), 640ms~11, 1280ms, 2560ms,
640ms(640ms), 1024ms~12, 5120ms
1024ms(1024ms), 1280ms~13,
1280ms(1280ms), 2560ms~14,
2560ms(2560ms), 5120ms~15
5120ms(5120ms)

0~5 N/A None 0~5 None

0~9 N/A None 0~9 None

NO_HO, NO_HO~0, NO_HO,

PERMIT_HO, PERMIT_HO~1, None PERMIT_HO, NO_HO
MUST_HO MUST_HO~2 MUST_HO
SERVIC_IR_MEAS SERVIC_IR_MEAS SERVIC_IR_MEAS
_NO_ORDER, _NO_ORDER~0, _NO_ORDER, SERVIC_IR_MEAS
None
SERVICE_IR_MEA SERVICE_IR_MEA SERVICE_IR_MEA _NO_ORDER
S_ORDER S_ORDER~1 S_ORDER

1~256 N/A None 1~256 None

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(FALSE)
TRUE(TRUE)

NOT_CFG(NOT_C NOT_CFG~0, NOT_CFG(NOT_C

None NOT_CFG, CFG
FG), CFG(CFG) CFG~1 FG)

0~255 N/A None 0~255 0

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE TRUE(TRUE)
TRUE(TRUE)

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE TRUE(TRUE)
TRUE(TRUE)
FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE TRUE(TRUE)
TRUE(TRUE)

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(FALSE)
TRUE(TRUE)

1~256 N/A None 1~256 None

1~256 N/A None 1~256 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~4095,429496729 0~4095,429496729
N/A None None
5 5

PsHoCapCfg(PsHo
CapCfg),
SiByRimCapCfg(Si PsHoCapCfg~0, PsHoCapCfg, PsHoCapCfg:Off,
ByRimCapCfg), SiByRimCapCfg~1, SiByRimCapCfg, SiByRimCapCfg:Off
VoipCapCfg(VoipCa VoipCapCfg~2, None VoipCapCfg, , VoipCapCfg:On,
pCfg), UltraFlashCsfbCap UltraFlashCsfbCap UltraFlashCsfbCap
UltraFlashCsfbCap Cfg~3 Cfg Cfg:Off
Cfg(UltraFlashCsfb
CapCfg)

0~5 N/A None 0~5 None

1~9 N/A None 1~9 None

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

1~64 characters N/A None 1~64 characters None

1~255 N/A None 1~255 1

0~1048575 N/A None 0~1048575 0

0~256 characters N/A None 0~256 characters NULL(empty string)

0~64 characters N/A None 0~64 characters NULL(empty string)

0~128 characters N/A None 0~128 characters NULL(empty string)

1~100 characters N/A None 1~100 None

Valid IP address N/A None Valid IP address None

Valid IP address N/A None Valid IP address 0.0.0.0

1~15 N/A None 1~15 None

0~65535 N/A None 0~65535 None

1~100 characters N/A None 1~100 None

5~254 N/A None 5~254 None

1~4294967295 N/A bit/s 1~4294967295 None

1~4294967295 N/A bit/s 1~4294967295 None

1~15 N/A None 1~15 None

DISABLED(DISABL
ED), DISABLED~0, DISABLED,
None None
ENABLED(ENABLE ENABLED~1 ENABLED
D)
DISABLED(DISABL
ED), DISABLED~0, DISABLED,
None None
ENABLED(ENABLE ENABLED~1 ENABLED
D)

0~255 N/A None 0~255 None

32768~65535 N/A None 32768~65535 None

0~255 N/A None 0~255 None

0~64 characters N/A None 0~64 None

0~64 characters N/A None 0~64 None

EEA0(NULL),
EEA0~0, EEA1~1, EEA0:Off,
EEA1(SNOW 3G), None EEA0, EEA1, EEA2
EEA2~2 EEA1:Off, EEA2:On
EEA2(AES)

EIA1(SNOW 3G),
EIA1~0, EIA2~1 None EIA1, EIA2 EIA1:Off, EIA2:On
EIA2(AES)

1~15 N/A None 1~15 None

Valid IP address N/A None Valid IP address None

Valid IP address N/A None Valid IP address None

Valid Mask address N/A None Valid Mask address None

0~65535 N/A None 0~65535 None

Valid IP address N/A None Valid IP address None

None N/A None None None

Valid IP address N/A None Valid IP address None

0~127 characters N/A None 0~127 None

Valid IP address N/A None Valid IP address 0.0.0.0

Y(Y), N(N) Y~0, N~1 None Y, N None

Valid IP address N/A None Valid IP address None

1~31 characters N/A None 1~31 None

NormalReset(Norm
alReset), NormalReset~0, NormalReset,
None None
PoweroffReset(Pow PoweroffReset~1 PoweroffReset
eroffReset)
Available(Available)
, Available~0, Available,
None None
Unavilable(Unavilab Unavilable~1 Unavilable
le)
MainArea(Main
Area),
MainArea~0, MainArea,
StandbyArea(Stand
StandbyArea~1, None StandbyArea, None
by Area),
DownloadArea~2 DownloadArea
DownloadArea(Dow
nload Area)

0~63 characters N/A None 0~63 None

1~31 characters N/A None 1~31 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

INVENTORY(INVE
INVENTORY~0 None INVENTORY None
NTORY)

0~65535 N/A None 0~65535 None

Valid IP address N/A None Valid IP address None

Valid IP address N/A None Valid IP address None

0~65535 N/A None 0~65535 None

0~1 N/A None 0~1 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON None

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

Valid IP address N/A None Valid IP address None

Valid IP address N/A None Valid IP address None

Valid IP address N/A None Valid IP address None

0~65535 N/A None 0~65535 None

UE(UE),
UE~0, RRN~1 None UE, RRN None
RRN(RRN)

000000000000000
15 characters N/A None ~99999999999999 None
9

000000000000000
15 characters N/A None ~99999999999999 None
9

0~255 N/A None 0~255 None

0000000000000000
32 characters N/A None 0000000000000000 None
~ffffffffffffffffffffffffffffffff

0000000000000000
32 characters N/A None 0000000000000000 None
~ffffffffffffffffffffffffffffffff

1~4294967295 N/A bit/s 1~4294967295 75000000

1~4294967295 N/A bit/s 1~4294967295 150000000

0~65535 N/A None 0~65535 None

0~79 characters N/A None 0~79 NULL(empty string)

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

0~16 characters N/A None 0~16 characters NULL(empty string)

DISABLED(DISABL
ED), DISABLED~0, DISABLED, DISABLED(DISABL
None
ENABLED(ENABLE ENABLED~1 ENABLED ED)
D)

0~65535 N/A None 0~65535 0

10~254 N/A None 10~254 None

NO(NO), YES(YES) NO~0, YES~1 None NO, YES NO(NO)

0~39 N/A None 0~39 5

PQ(PQ),
PQ~0, WFQ~1 None PQ, WFQ PQ(PQ)
WFQ(WFQ)
1~100 N/A None 1~100 30

1~100 N/A None 1~100 30

0~63 N/A None 0~63 0

0~63 N/A None 0~63 63

0~10 N/A None 0~1, step:0.1 10

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 256ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
0~30 N/A 0.5dB 0~15 2

-30~30 N/A 0.5dB -15~15 0

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 512ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
0~30 N/A 0.5dB 0~15 2
-141~-43 N/A dBm -141~-43 -106

0,10~600 N/A s 0,10~600 0

0,128~4294967295 N/A None 0,128~4294967295 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, AES(AES
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, Snow3G(SNOW 3G
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, ZUC(ZUC
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, NULL(NULL
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)
1~200 N/A s 1~200 20
1~200 N/A s 1~200 20
1~200 N/A s 1~200 35

1~65535 N/A ms 1~65535 5000

1~65535 N/A ms 1~65535 5000

1~65535 N/A ms 1~65535 10000

1~65535 N/A ms 1~65535 8000

1~65535 N/A ms 1~65535 5000

1~65535 N/A ms 1~65535 5000

3~15 N/A s 3~15 15

1~200 N/A s 1~200 35

1~200 N/A s 1~200 35

0~1000 N/A ms 0~1000 50

0~1000 N/A ms 0~1000 35

1~200 N/A s 1~200 20

1~200 N/A s 1~200 20

1~200 N/A s 1~200 35

0~80 N/A 50ms 0~4000 80

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, AES(AES
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, Snow3G(SNOW 3G
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)
NULL(NULL
Algorithm),
Snow3G(SNOW 3G
NULL~0,
Algorithm), NULL, Snow3G, ZUC(ZUC
Snow3G~1, AES~2, None
AES(AES AES, ZUC Algorithm)
ZUC~3
Algorithm),
ZUC(ZUC
Algorithm)

Disable(Disable
NULL Algorithm), Disable~0, Enable(Enable
None Disable, Enable
Enable(Enable Enable~1 NULL Algorithm)
NULL Algorithm)

0~99999999 N/A None 0~99999999 None

0~99,255 N/A None 0~99,255 None

0~80 characters N/A None 0~80 None

UsBasedSpecificSP
ID(UsBasedSpecific
UsBasedSpecificSP
SPID), UsBasedSpecificSP UsBasedSpecificSP
ID:Off,
UsBasedSpecificIP ID~0, ID,
UsBasedSpecificIP
Add(UsBasedSpeci UsBasedSpecificIP UsBasedSpecificIP
Add:Off,
ficIPAdd), Add~1, None Add,
UsBasedSpecificTr
UsBasedSpecificTr UsBasedSpecificTr UsBasedSpecificTr
aceID:Off,
aceID(UsBasedSpe aceID~2, aceID,
UsBasedIMEISV:Of
cificTraceID), UsBasedIMEISV~3 UsBasedIMEISV
f
UsBasedIMEISV(U
sBasedIMEISV)

1~256 N/A None 1~256 256

0~3600 N/A None 0~3600 30

0~3600 N/A None 0~3600 70

1~1000 N/A None 0.001~1, step:0.001 20

1~1000 N/A None 1~1000 20

1~1000 N/A None 1~1000 20

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~23 N/A None 0~23 None

0~4294967295 N/A None 0~4294967295 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

U_MODE(Unidirecti
onal Mode),
O_MODE(Bi-
U_MODE~1, U_MODE, O_MODE(Bi-
directional
O_MODE~2, None O_MODE, directional
Optimistic Mode),
R_MODE~3 R_MODE Optimistic Mode)
R_MODE(Bi-
Directional Reliable
Mode)
Profile0x0001(Profil
e0x0001),
Profile0x0002(Profil Profile0x0001~0, Profile0x0001, Profile0x0001:On,
e0x0002), Profile0x0002~1, Profile0x0002, Profile0x0002:On,
None
Profile0x0003(Profil Profile0x0003~2, Profile0x0003, Profile0x0003:On,
e0x0003), Profile0x0004~3 Profile0x0004 Profile0x0004:On
Profile0x0004(Profil
e0x0004)

0~31 N/A None 0~31 None

20~300 N/A MHz 20~300 None

0~31 N/A None 0~31 None

1~256 N/A None 1~256 1

1~256 N/A None 1~256 1

0~256 N/A None 0~256 0

0~256 N/A None 0~256 0

Bandwidth_1_4M(1.
Bandwidth_1_4M:O
4M),
n,
Bandwidth_3M(3M), Bandwidth_1_4M~0 Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_5M(5M), , Bandwidth_3M~1, Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_10M(10 Bandwidth_5M~2, Bandwidth_5M,
None Bandwidth_10M:Off
M), Bandwidth_10M~3, Bandwidth_10M,
,
Bandwidth_15M(15 Bandwidth_15M~4, Bandwidth_15M,
Bandwidth_15M:Off
M), Bandwidth_20M~5 Bandwidth_20M
,
Bandwidth_20M(20
Bandwidth_20M:Off
M)

Bandwidth_1_4M(1.
Bandwidth_1_4M:O
4M),
n,
Bandwidth_3M(3M), Bandwidth_1_4M~0 Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_5M(5M), , Bandwidth_3M~1, Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_10M(10 Bandwidth_5M~2, Bandwidth_5M,
None Bandwidth_10M:Off
M), Bandwidth_10M~3, Bandwidth_10M,
,
Bandwidth_15M(15 Bandwidth_15M~4, Bandwidth_15M,
Bandwidth_15M:Off
M), Bandwidth_20M~5 Bandwidth_20M
,
Bandwidth_20M(20
Bandwidth_20M:Off
M)
Bandwidth_1_4M(1.
Bandwidth_1_4M:O
4M),
ff,
Bandwidth_3M(3M), Bandwidth_1_4M~0 Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_5M(5M), , Bandwidth_3M~1, Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_10M(10 Bandwidth_5M~2, Bandwidth_5M,
None Bandwidth_10M:Off
M), Bandwidth_10M~3, Bandwidth_10M,
,
Bandwidth_15M(15 Bandwidth_15M~4, Bandwidth_15M,
Bandwidth_15M:Off
M), Bandwidth_20M~5 Bandwidth_20M
,
Bandwidth_20M(20
Bandwidth_20M:Off
M)

Bandwidth_1_4M(1.
Bandwidth_1_4M:O
4M),
ff,
Bandwidth_3M(3M), Bandwidth_1_4M~0 Bandwidth_1_4M,
Bandwidth_3M:Off,
Bandwidth_5M(5M), , Bandwidth_3M~1, Bandwidth_3M,
Bandwidth_5M:Off,
Bandwidth_10M(10 Bandwidth_5M~2, Bandwidth_5M,
None Bandwidth_10M:Off
M), Bandwidth_10M~3, Bandwidth_10M,
,
Bandwidth_15M(15 Bandwidth_15M~4, Bandwidth_15M,
Bandwidth_15M:Off
M), Bandwidth_20M~5 Bandwidth_20M
,
Bandwidth_20M(20
Bandwidth_20M:Off
M)
NOT_CONFILCT(N
ot conflict), NOT_CONFILCT~0
NOT_CONFILCT,
CONFILCT_WITH_ ,
CONFILCT_WITH_
PRIVATE(Conflict CONFILCT_WITH_
None PRIVATE, None
with Private), PRIVATE~1,
CONFILCT_WITH_
CONFILCT_WITH_ CONFILCT_WITH_
3GPP
3GPP(Conflict with 3GPP~2
3GPP)

1~16 N/A s 1~16 4

min5(5), min10(10),
min5~0, min10~1,
min20(20), min5, min10,
min20~2, min30~3,
min30(30), min20, min30,
min60~4, min min10(10)
min60(60), min60, min120,
min120~5,
min120(120), min180
min180~6
min180(180)

ms50(50),
ms50~0, ms100~1,
ms100(100),
ms150~2, ms50, ms100,
ms150(150),
ms200~3, ms150, ms200,
ms200(200), ms ms500(500)
ms500~4, ms500, ms1000,
ms500(500),
ms1000~5, ms2000
ms1000(1000),
ms2000~6
ms2000(2000)
ms100(100), ms100~0,
ms200(200), ms200~1,
ms100, ms200,
ms500(500), ms500~2,
ms500, ms1000,
ms1000(1000), ms1000~3, ms ms8000(8000)
ms2000, ms4000,
ms2000(2000), ms2000~4,
ms8000
ms4000(4000), ms4000~5,
ms8000(8000) ms8000~6

min5(5), min10(10),
min5~0, min10~1,
min20(20), min5, min10,
min20~2, min30~3,
min30(30), min20, min30,
min60~4, min min120(120)
min60(60), min60, min120,
min120~5,
min120(120), min180
min180~6
min180(180)
0~3600 N/A s 0~3600 20
0~3600 N/A s 0~3600 180

0~15 N/A s 0~15 2

10~3600 N/A s 10~3600 200
5~3600 N/A s 5~3600 20
0~3600 N/A s 0~3600 20
OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

1~49 N/A None 1~49 20

m50(50ms), m45~8, m50~9,
m55(55ms), m55~10, m60~11,
m60(60ms), m65~12, m70~13,
m65(65ms), m75~14, m80~15,
m70(70ms), m85~16, m90~17,
m75(75ms), m95~18, m100~19,
m80(80ms), m105~20,
m85(85ms), m110~21,
m90(90ms), m115~22,
m95(95ms), m120~23, m5, m10, m15,
m100(100ms), m125~24, m20, m25, m30,
m105(105ms), m130~25, m35, m40, m45,
m110(110ms), m135~26, m50, m55, m60,
m115(115ms), m140~27, m65, m70, m75,
m120(120ms), m145~28, m80, m85, m90,
m125(125ms), m150~29, m95, m100, m105,
m130(130ms), m155~30, m110, m115, m120,
m135(135ms), m160~31, m125, m130, m135,
m140(140ms), m165~32, None m140, m145, m150, m200(200ms)
m145(145ms), m170~33, m155, m160, m165,
m150(150ms), m175~34, m170, m175, m180,
m155(155ms), m180~35, m185, m190, m195,
m160(160ms), m185~36, m200, m205, m210,
m165(165ms), m190~37, m215, m220, m225,
m170(170ms), m195~38, m230, m235, m240,
m175(175ms), m200~39, m245, m250, m300,
m180(180ms), m205~40, m350, m400, m450,
m185(185ms), m210~41, m500
m190(190ms), m215~42,
m195(195ms), m220~43,
m200(200ms), m225~44,
m205(205ms), m230~45,
m210(210ms), m235~46,
m215(215ms), m240~47,
m220(220ms), m245~48,
m225(225ms), m250~49,
m230(230ms), m300~50,
0~5000 N/A None 0~5000 150

0~255 N/A None 0~255 None

IPv4(IPv4 Address),
IPv4~0, IPv6~1 None IPv4, IPv6 IPv4(IPv4 Address)
IPv6(IPv6 Address)

Valid IP address N/A None Valid IP address 0.0.0.0

Valid IP address N/A None Valid IP address 0:0:0:0:0:0:0:0

ArpPrioritySchSwitc
ArpPrioritySchSwitc ArpPrioritySchSwitc ArpPrioritySchSwitc
h(ArpPrioritySchSwi None
h~0 h h:0
tch)

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None GOLD(Gold)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None GOLD(Gold)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None GOLD(Gold)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None GOLD(Gold)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None GOLD(Gold)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None SILVER(Silver)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None SILVER(Silver)
BRONZE
BRONZE(Bronze) BRONZE~3
GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None SILVER(Silver)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None SILVER(Silver)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None SILVER(Silver)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None BRONZE(Bronze)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None BRONZE(Bronze)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None BRONZE(Bronze)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None BRONZE(Bronze)
BRONZE
BRONZE(Bronze) BRONZE~3

GOLD(Gold), GOLD~1,
GOLD, SILVER,
SILVER(Silver), SILVER~2, None BRONZE(Bronze)
BRONZE
BRONZE(Bronze) BRONZE~3

QCI6(QCI6),
QCI7(QCI7), QCI6~6, QCI7~7, QCI6, QCI7, QCI8,
None None
QCI8(QCI8), QCI8~8, QCI9~9 QCI9
QCI9(QCI9)

1~1000 N/A None 0.001~1, step:0.001 850

1~1000 N/A None 0.001~1, step:0.001 850

1~1000 N/A None 0.001~1, step:0.001 650

1~1000 N/A None 0.001~1, step:0.001 650

1~1000 N/A None 0.001~1, step:0.001 450

1~1000 N/A None 0.001~1, step:0.001 450

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~255 N/A None 0~255 None

-140~-43 N/A dBm -140~-43 -109

-140~-43 N/A dBm -140~-43 -105

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~30 N/A kB 0~30 9

1~10 N/A kB 1~10 3

0~300 N/A ms 0~300 50

10~1000 N/A kbit/s 10~1000 100

-30~30 N/A 0.5dB -15~15 2
1~65535 N/A min 1~65535 15
r1(1), r2(2), r4(4),
r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None r8(8)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)
 120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 10240ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
0~15 N/A None 0~15 0
5~60 N/A s 5~60 60
CaDl3CCSwitch(Ca
Dl3CCSwitch), CaDl3CCSwitch:Off
CaUl2CCSwitch(Ca ,
CaDl3CCSwitch~0, CaDl3CCSwitch,
Ul2CCSwitch), CaUl2CCSwitch:Off
CaUl2CCSwitch~1, CaUl2CCSwitch,
CaDl4CCSwitch(Ca ,
CaDl4CCSwitch~2, CaDl4CCSwitch,
Dl4CCSwitch), CaDl4CCSwitch:Off
InterFddTddCaSwit None InterFddTddCaSwit
InterFddTddCaSwit ,
ch~3, ch,
ch(InterFddTddCaS InterFddTddCaSwit
Tdd2CCDlCaEnhan Tdd2CCDlCaEnhan
witch), ch:Off,
ceSwitch~4 ceSwitch
Tdd2CCDlCaEnhan Tdd2CCDlCaEnhan
ceSwitch(Tdd2CCD ceSwitch:Off
lCaEnhanceSwitch)

0~2000 N/A ms 0~2000 20

0~65535 N/A Mbps 0~65535 0
 NOT_CFG~0,
160ms~1,
NOT_CFG, 160ms, 256ms~2, NOT_CFG, 160ms,
256ms, 320ms, 320ms~3, 256ms, 320ms,
None NOT_CFG
512ms, 640ms, 512ms~4, 512ms, 640ms,
1024ms, 1280ms 640ms~5, 1024ms, 1280ms
1024ms~6,
1280ms~7
0~65535 N/A None 0~65535 65535

0~255 N/A None 0~255 None

NO_ADAPTIVE(NO
_ADAPTIVE),
NO_ADAPTIVE~0, NO_ADAPTIVE,
TxD_BF_ADAPTIV
TxD_BF_ADAPTIV TxD_BF_ADAPTIV MIMO_BF_ADAPTI
E(TxD_BF_ADAPTI
E~1, None E, VE(MIMO_BF_ADA
VE),
MIMO_BF_ADAPTI MIMO_BF_ADAPTI PTIVE)
MIMO_BF_ADAPTI
VE~2 VE
VE(MIMO_BF_ADA
PTIVE)
TM2(TM2),
TM3(TM3),
TM7(TM7), TM2~0, TM3~1,
TM2, TM3, TM7,
TM8(TM8), TM7~2, TM8~3,
TM8, TM4,
TM4(TM4), TM4~4, None TM3(TM3)
TM9w/oPMI,
TM9w/oPMI(TM9w/ TM9w/oPMI~5,
TM9wPMI
oPMI), TM9wPMI~6
TM9wPMI(TM9wP
MI)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
-337~345 N/A 0.01bit/RE -3.37~3.45 0
-70~50 N/A 0.1bit/RE -7.0~5.0 0
-70~50 N/A 0.1bit/RE -7.0~5.0 0
-70~50 N/A 0.1bit/RE -7.0~5.0 0
-70~50 N/A 0.1bit/RE -7.0~5.0 0
-70~50 N/A 0.1bit/RE -7.0~5.0 0
-128~128 N/A 0.1dB -12.8~12.8 127
-128~128 N/A 0.1dB -12.8~12.8 128

0(0), 1(1), 2(2) 0~0, 1~1, 2~2 None 0, 1, 2 0(0)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~70 N/A 0.1bit/RE 0~70 0

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

ms2(2ms),
ms2~2, ms5~5,
ms5(5ms),
ms10~10,
ms10(10ms), ms2, ms5, ms10,
ms20~20,
ms20(20ms), ms ms20, ms40, ms80, ms40(40ms)
ms40~40,
ms40(40ms), ms160
ms80~80,
ms80(80ms),
ms160~160
ms160(160ms)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

-30~30 N/A 0.5dB -15~15 -12

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

DB_6_P_A(-6 dB),
DB_4DOT77_P_A(- DB_6_P_A~0, DB_6_P_A,
4.77 dB), DB_4DOT77_P_A~ DB_4DOT77_P_A,
DB_3_P_A(-3 dB), 1, DB_3_P_A~2, DB_3_P_A,
DB_1DOT77_P_A(- DB_1DOT77_P_A~ DB_1DOT77_P_A,
dB DB_3_P_A(-3 dB)
1.77 dB), 3, DB0_P_A~4, DB0_P_A,
DB0_P_A(0 dB), DB1_P_A~5, DB1_P_A,
DB1_P_A(1 dB), DB2_P_A~6, DB2_P_A,
DB2_P_A(2 dB), DB3_P_A~7 DB3_P_A
DB3_P_A(3 dB)

0~255 N/A None 0~255 None

0~1000 N/A per mill 0~1000 1000

1~1000 N/A per mill 1~1000 1000

0~1999 N/A per mill 0~1999 300

1~2000 N/A per mill 1~2000 800

0~1999 N/A per mill 0~1999 300

1~2000 N/A per mill 1~2000 800

2~300 N/A 20ms 40~6000 30

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

2~300 N/A 20ms 40~6000 50

0~1999 N/A per mill 0~1999 800

0~1999 N/A per mill 0~1999 900

SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6, SF10, SF20, SF32,
subframes),
SF160~7, SF40, SF64, SF80,
SF160(160
SF256~8, SF128, SF160,
subframes), SF1280(1280
SF320~9, subframe SF256, SF320,
SF256(256 subframes)
SF512~10, SF512, SF640,
subframes),
SF640~11, SF1024, SF1280,
SF320(320
SF1024~12, SF2048, SF2560
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes), PSF1, PSF2, PSF3,
PSF8~6, PSF10~7,
PSF10(10 PDCCH PSF4, PSF5, PSF6,
PSF20~8,
subframes), PSF8, PSF10,
PSF30~9, PSF5(5 PDCCH
PSF20(20 PDCCH subframe PSF20, PSF30,
PSF40~10, subframes)
subframes), PSF40, PSF50,
PSF50~11,
PSF30(30 PDCCH PSF60, PSF80,
PSF60~12,
subframes), PSF100, PSF200
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
PSF200(200
PDCCH
subframes),
PSF300(300
PDCCH
subframes),
PSF500(500
PSF200~0,
PDCCH
PSF300~1,
subframes), PSF200, PSF300,
PSF500~2,
PSF750(750 PSF500, PSF750, PSF200(200
PSF750~3, subframe
PDCCH PSF1280, PDCCH subframes)
PSF1280~4,
subframes), PSF1920, PSF2560
PSF1920~5,
PSF1280(1280
PSF2560~6
PDCCH
subframes),
PSF1920(1920
PDCCH
subframes),
PSF2560(2560
PDCCH subframes)

DEFAULT(Default),
DEFAULT~0, DEFAULT,
QCIPRIORITY(QCI None DEFAULT(Default)
QCIPRIORITY~1 QCIPRIORITY
priority)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF128, SF160,
SF512(512 SF320~9,
SF256, SF320,
subframes), SF512~10, SF160(160
subframe SF512, SF640,
SF640(640 SF640~11, subframes)
SF1024, SF1280,
subframes), SF1024~12,
SF2048, SF2560
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes), PSF1, PSF2, PSF3,
PSF8~6, PSF10~7,
PSF10(10 PDCCH PSF4, PSF5, PSF6,
PSF20~8,
subframes), PSF8, PSF10,
PSF30~9, PSF2(2 PDCCH
PSF20(20 PDCCH subframe PSF20, PSF30,
PSF40~10, subframes)
subframes), PSF40, PSF50,
PSF50~11,
PSF30(30 PDCCH PSF60, PSF80,
PSF60~12,
subframes), PSF100, PSF200
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8, PSF1, PSF2, PSF3,
subframes),
PSF30~9, PSF4, PSF5, PSF6,
PSF50(50 PDCCH
PSF40~10, PSF8, PSF10,
subframes),
PSF50~11, PSF20, PSF30,
PSF60(60 PDCCH
PSF60~12, PSF40, PSF50, PSF2(2 PDCCH
subframes), subframe
PSF80~13, PSF60, PSF80, subframes)
PSF80(80 PDCCH
PSF100~14, PSF100, PSF200,
subframes),
PSF200~15, PSF300, PSF500,
PSF100(100
PSF300~16, PSF750, PSF1280,
PDCCH
PSF500~17, PSF1920, PSF2560
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
PSF1(1 PDCCH
subframes), PSF2(2
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF6(6
PSF1~0, PSF2~1,
PDCCH PSF1, PSF2, PSF4,
PSF4~2, PSF6~3,
subframes), PSF8(8 PSF6, PSF8, PSF4(4 PDCCH
PSF8~4, PSF16~5, subframe
PDCCH PSF16, PSF24, subframes)
PSF24~6,
subframes), PSF33
PSF33~7
PSF16(16 PDCCH
subframes),
PSF24(24 PDCCH
subframes),
PSF33(33 PDCCH
subframes)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5, SF2, SF5, SF8,
subframes), SF32~6, SF40~7, SF10, SF16, SF20,
SF64(64 SF64~8, SF80~9, SF32, SF40, SF64,
SF20(20
subframes), SF128~10, subframe SF80, SF128,
subframes)
SF80(80 SF160~11, SF160, SF256,
subframes), SF256~12, SF320, SF512,
SF128(128 SF320~13, SF640
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
1~16 N/A None 1~16 1
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

-140~-43 N/A dBm -140~-43 -121
-40~-6 N/A 0.5dB -20~-3 -28

30~350 N/A km/h 30~350 60

BlindHoSwitch(Blin
BlindHoSwitch~0 None BlindHoSwitch BlindHoSwitch:Off
dHoSwitch)

SRVCCWITHPSCS
RETRYSWITCH(Sr SRVCCWITHPSCS SRVCCWITHPSCS SRVCCWITHPSCS
None
vccWithPsCsRetryS RETRYSWITCH~0 RETRYSWITCH RETRYSWITCH:Off
witch)
0~28 N/A None 0~28 5

0~100 N/A % 0~100 20

HS_30S(30s), HS_30S~0,
HS_30S, HS_60S,
HS_60S(60s), HS_60S~1,
HS_120S,
HS_120S(120s), HS_120S~2, None HS_30S(30s)
HS_180S,
HS_180S(180s), HS_180S~3,
HS_240S
HS_240S(240s) HS_240S~4

1~16 N/A None 1~16 3

HANDOVER_IMME
DIATELY(HANDOV
ER_IMMEDIATELY)
, HANDOVER_IMME HANDOVER_IMME
BASED_ON_SIGN DIATELY~0, DIATELY,
HANDOVER_IMME
AL_STRENGTH(BA BASED_ON_SIGN BASED_ON_SIGN
None DIATELY(HANDOV
SED_ON_SIGNAL_ AL_STRENGTH~1, AL_STRENGTH,
ER_IMMEDIATELY)
STRENGTH), BASED_ON_FREQ BASED_ON_FREQ
BASED_ON_FREQ _PRIORITY~2 _PRIORITY
_PRIORITY(BASE
D_ON_FREQ_PRI
ORITY)

60~1000 N/A ms 60~1000 100

0~255 N/A None 0~255 None

NO_ADAPTIVE(NO
_ADAPTIVE),
OL_ADAPTIVE(OL NO_ADAPTIVE~0, NO_ADAPTIVE,
_ADAPTIVE), OL_ADAPTIVE~1, OL_ADAPTIVE, OL_ADAPTIVE(OL
None
CL_ADAPTIVE(CL_ CL_ADAPTIVE~2, CL_ADAPTIVE, _ADAPTIVE)
ADAPTIVE), OC_ADAPTIVE~3 OC_ADAPTIVE
OC_ADAPTIVE(OC
_ADAPTIVE)
TM2(TM2),
TM3(TM3), TM2~0, TM3~1, TM2, TM3, TM4,
None TM3(TM3)
TM4(TM4), TM4~2, TM6~3 TM6
TM6(TM6)
TM2(TM2),
TM2~0, ADAPTIVE(ADAPTI
ADAPTIVE(ADAPTI None TM2, ADAPTIVE
ADAPTIVE~1 VE)
VE)

0~255 N/A None 0~255 None

RESELBASED(RE
RESELBASED~0,
SELPRIOBASED), RESELBASED, RESELBASED(RE
MLBPRIOBASED~ None
MLBPRIOBASED( MLBPRIOBASED SELPRIOBASED)
1
MLBPRIOBASED)
PROTECTTIMERM
ODE(PROTECTTI PROTECTTIMERM PROTECTTIMERM PROTECTTIMERM
MER MODE), ODE~0, ODE, ODE:Off,
None
SPECEVENTA1A2 SPECEVENTA1A2 SPECEVENTA1A2 SPECEVENTA1A2
MODE(SPECEVEN MODE~1 MODE MODE:Off
TA1A2 MODE)
0~3600 N/A s 0~3600 0

-140~-43 N/A dBm -140~-43 -105

-40~-6 N/A 0.5dB -20~-3 -20

-140~-43 N/A dBm -140~-43 -109

-40~-6 N/A 0.5dB -20~-3 -24

UtranRedirectIMMC
UtranRedirectIMMC UtranRedirectIMMC UtranRedirectIMMC
I(UtranRedirectIMM None
I~0 I I:Off
CI)

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~40 N/A ms 1~40 5

45~1500 N/A byte 45~1500 80

0~2000 N/A ms 0~2000 0

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

ms5(5ms),
ms10(10ms),
ms5~1, ms10~2,
ms20(20ms), ms5, ms10, ms20,
ms20~3, ms40~4,
ms40(40ms), ms ms40, ms80, ms40(40ms)
ms80~5, ms160~6,
ms80(80ms), ms160, ms320
ms320~7
ms160(160ms),
ms320(320ms)

0~255 N/A None 0~255 None

1~32 N/A None 1~32 7
1~8 N/A None 1~8 3
1~8 N/A None 1~8 3
1~16 N/A None 1~16 3
1~16 N/A None 1~16 3
1~64 N/A None 1~64 32

0~255 N/A None 0~255 None

-30~30 N/A 0.5dB -15~15 -20

-15~15 N/A dB -15~15 -8

-30~30 N/A 0.5dB -15~15 -6

0~255 N/A None 0~255 None

UU_DISABLE(Disa
ble), UU_DISABLE~0, UU_DISABLE, UU_DISABLE(Disa
None
UU_ENABLE(Enabl UU_ENABLE~1 UU_ENABLE ble)
e)
-105,-90,-75,-60,- -10.5,-9,-7.5,-6,-
45,-30,- 4.5,-3,-
N/A 0.1dB -30
15,0,15,30,45,60,75 1.5,0,1.5,3,4.5,6,7.5
,90,105,120 ,9,10.5,12

-30,-20,-
-3,-2,-
10,0,10,20,30,40,50
N/A 0.1dB 1,0,1,2,3,4,5,6,7,8,9 -30
,60,70,80,90,100,11
,10,11,12
0,120
COEFF(UU_FC1_F
ILTER_COEFF),
UU_FC2_FILTER_
COEFF(UU_FC2_F
UU_FC0_FILTER_ UU_FC0_FILTER_
ILTER_COEFF),
COEFF~0, COEFF,
UU_FC3_FILTER_
UU_FC1_FILTER_ UU_FC1_FILTER_
COEFF(UU_FC3_F
COEFF~1, COEFF,
ILTER_COEFF),
UU_FC2_FILTER_ UU_FC2_FILTER_
UU_FC4_FILTER_
COEFF~2, COEFF,
COEFF(UU_FC4_F
UU_FC3_FILTER_ UU_FC3_FILTER_
ILTER_COEFF),
COEFF~3, COEFF,
UU_FC5_FILTER_
UU_FC4_FILTER_ UU_FC4_FILTER_
COEFF(UU_FC5_F
COEFF~4, COEFF,
ILTER_COEFF),
UU_FC5_FILTER_ UU_FC5_FILTER_
UU_FC6_FILTER_
COEFF~5, COEFF,
COEFF(UU_FC6_F
UU_FC6_FILTER_ UU_FC6_FILTER_
ILTER_COEFF),
COEFF~6, COEFF,
UU_FC7_FILTER_ UU_FC6_FILTER_
UU_FC7_FILTER_ UU_FC7_FILTER_
COEFF(UU_FC7_F None COEFF(UU_FC6_F
COEFF~7, COEFF,
ILTER_COEFF), ILTER_COEFF)
UU_FC8_FILTER_ UU_FC8_FILTER_
UU_FC8_FILTER_
COEFF~8, COEFF,
COEFF(UU_FC8_F
UU_FC9_FILTER_ UU_FC9_FILTER_
ILTER_COEFF),
COEFF~9, COEFF,
UU_FC9_FILTER_
UU_FC11_FILTER_ UU_FC11_FILTER_
COEFF(UU_FC9_F
COEFF~10, COEFF,
ILTER_COEFF),
UU_FC13_FILTER_ UU_FC13_FILTER_
UU_FC11_FILTER_
COEFF~11, COEFF,
COEFF(UU_FC11_
UU_FC15_FILTER_ UU_FC15_FILTER_
FILTER_COEFF),
COEFF~12, COEFF,
UU_FC13_FILTER_
UU_FC17_FILTER_ UU_FC17_FILTER_
COEFF(UU_FC13_
COEFF~13, COEFF,
FILTER_COEFF),
UU_FC19_FILTER_ UU_FC19_FILTER_
UU_FC15_FILTER_
COEFF~14 COEFF
COEFF(UU_FC15_
FILTER_COEFF),
UU_FC17_FILTER_
COEFF(UU_FC17_

0~255 N/A None 0~255 None

EUTRAN~0, EUTRAN:Off,
EUTRAN, GERAN, EUTRAN, GERAN,
GERAN~1, None GERAN:Off,
UTRAN UTRAN
UTRAN~2 UTRAN:Off
1~1000 N/A 100m 100~100000 10

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes), PSF1, PSF2, PSF3,
PSF8~6, PSF10~7,
PSF10(10 PDCCH PSF4, PSF5, PSF6,
PSF20~8,
subframes), PSF8, PSF10,
PSF30~9, PSF2(2 PDCCH
PSF20(20 PDCCH subframe PSF20, PSF30,
PSF40~10, subframes)
subframes), PSF40, PSF50,
PSF50~11,
PSF30(30 PDCCH PSF60, PSF80,
PSF60~12,
subframes), PSF100, PSF200
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8, PSF1, PSF2, PSF3,
subframes),
PSF30~9, PSF4, PSF5, PSF6,
PSF50(50 PDCCH
PSF40~10, PSF8, PSF10,
subframes),
PSF50~11, PSF20, PSF30,
PSF60(60 PDCCH
PSF60~12, PSF40, PSF50, PSF80(80 PDCCH
subframes), subframe
PSF80~13, PSF60, PSF80, subframes)
PSF80(80 PDCCH
PSF100~14, PSF100, PSF200,
subframes),
PSF200~15, PSF300, PSF500,
PSF100(100
PSF300~16, PSF750, PSF1280,
PDCCH
PSF500~17, PSF1920, PSF2560
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
PSF1(1 PDCCH
subframes), PSF2(2
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF6(6
PSF1~0, PSF2~1,
PDCCH PSF1, PSF2, PSF4,
PSF4~2, PSF6~3,
subframes), PSF8(8 PSF6, PSF8, PSF8(8 PDCCH
PSF8~4, PSF16~5, subframe
PDCCH PSF16, PSF24, subframes)
PSF24~6,
subframes), PSF33
PSF33~7
PSF16(16 PDCCH
subframes),
PSF24(24 PDCCH
subframes),
PSF33(33 PDCCH
subframes)
SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6, SF10, SF20, SF32,
subframes),
SF160~7, SF40, SF64, SF80,
SF160(160
SF256~8, SF128, SF160,
subframes), SF40(40
SF320~9, subframe SF256, SF320,
SF256(256 subframes)
SF512~10, SF512, SF640,
subframes),
SF640~11, SF1024, SF1280,
SF320(320
SF1024~12, SF2048, SF2560
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)

UU_DISABLE(Disa
ble), UU_DISABLE~0, UU_DISABLE, UU_ENABLE(Enabl
None
UU_ENABLE(Enabl UU_ENABLE~1 UU_ENABLE e)
e)
SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5, SF2, SF5, SF8,
subframes), SF32~6, SF40~7, SF10, SF16, SF20,
SF64(64 SF64~8, SF80~9, SF32, SF40, SF64,
SF20(20
subframes), SF128~10, subframe SF80, SF128,
subframes)
SF80(80 SF160~11, SF160, SF256,
subframes), SF256~12, SF320, SF512,
SF128(128 SF320~13, SF640
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
1~16 N/A None 1~16 1

0~255 N/A None 0~255 None

0~1023 N/A None 0~1023 None

GSM_dcs1800, GSM_dcs1800~0, GSM_dcs1800,

None GSM_dcs1800
GSM_pcs1900 GSM_pcs1900~1 GSM_pcs1900

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

-140~-43 N/A dBm -140~-43 -111

-40~-6 N/A 0.5dB -20~-3 -20

-140~-43 N/A dBm -140~-43 -115

-40~-6 N/A 0.5dB -20~-3 -24

-140~-43 N/A dBm -140~-43 -115

-40~-6 N/A 0.5dB -20~-3 -24

-140~-43 N/A dBm -140~-43 -115

-40~-6 N/A 0.5dB -20~-3 -24

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

-63~0 N/A 0.5dB -31.5~0 -28

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
None 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

-63~0 N/A 0.5dB -31.5~0 -24

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m MS100_T301~0, MS100_T301,
s), MS200_T301~1, MS200_T301,
MS400_T301(400m MS300_T301~2, MS300_T301,
s), MS400_T301~3, MS400_T301, MS200_T301(200m
ms
MS600_T301(600m MS600_T301~4, MS600_T301, s)
s), MS1000_T301~5, MS1000_T301,
MS1000_T301(100 MS1500_T301~6, MS1500_T301,
0ms), MS2000_T301~7 MS2000_T301
MS1500_T301(150
0ms),
MS2000_T301(200
0ms)

MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
MS0_T310~0, MS0_T310,
s),
MS50_T310~1, MS50_T310,
MS200_T310(200m
MS100_T310~2, MS100_T310,
s), MS1000_T310(100
MS200_T310~3, ms MS200_T310,
MS500_T310(500m 0ms)
MS500_T310~4, MS500_T310,
s),
MS1000_T310~5, MS1000_T310,
MS1000_T310(100
MS2000_T310~6 MS2000_T310
0ms),
MS2000_T310(200
0ms)
MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS1000_T311~0, MS1000_T311,
MS5000_T311(500
MS3000_T311~1, MS3000_T311,
0ms),
MS5000_T311~2, MS5000_T311,
MS10000_T311(10 MS10000_T311(10
MS10000_T311~3, ms MS10000_T311,
000ms), 000ms)
MS15000_T311~4, MS15000_T311,
MS15000_T311(15
MS20000_T311~5, MS20000_T311,
000ms),
MS30000_T311~6 MS30000_T311
MS20000_T311(20
000ms),
MS30000_T311(30
000ms)

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

n1, n2, n3, n4, n6,
n4(4), n6(6), n8(8), n4~3, n6~4, n8~5, None n10(10)
n8, n10, n20
n10(10), n20(20) n10~6, n20~7

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

n1, n2, n3, n4, n5,
n4(4), n5(5), n6(6), n4~3, n5~4, n6~5, None n1(1)
n6, n8, n10
n8(8), n10(10) n8~6, n10~7

10~254 N/A None 10~254 None

0~255 N/A None 0~255 None

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

NOT_CFG(NOT_C NOT_CFG~0, NOT_CFG(NOT_C

None NOT_CFG, CFG
FG), CFG(CFG) CFG~1 FG)

0~9 N/A None 0~9 0

0~65000 N/A ms 0~65000 30000

0~255 N/A None 0~255 None

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4, QCI1, QCI2, QCI3,
QCI5(QCI 5), QCI5~5, QCI6~6, None QCI4, QCI5, QCI6, None
QCI6(QCI 6), QCI7~7, QCI8~8, QCI7, QCI8, QCI9
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

0~9 N/A None 0~9 0

ms5(SRI 5ms),
ms10(SRI 10ms), ms5~0, ms10~1,
ms5, ms10, ms20,
ms20(SRI 20ms), ms20~2, ms40~3, None ms10(SRI 10ms)
ms40, ms80
ms40(SRI 40ms), ms80~4
ms80(SRI 80ms)

NOT_CFG(NOT_C NOT_CFG~0, NOT_CFG(NOT_C

None NOT_CFG, CFG
FG), CFG(CFG) CFG~1 FG)
0~9 N/A None 0~9 0

0~65000 N/A ms 0~65000 30000

1~9 N/A None 1~9 9

0~9,255 N/A None 0~9,255 255

0~9,255 N/A None 0~9,255 255

1~9 N/A None 1~9 9

INTER_FREQ_MLB
_ALLOWED(INTER INTER_FREQ_MLB INTER_FREQ_MLB INTER_FREQ_MLB
None
_FREQ_MLB_ALL _ALLOWED~0 _ALLOWED _ALLOWED:On
OWED)

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

-63~0 N/A 0.5dB -31.5~0 -14

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
-63~0 N/A 0.5dB -31.5~0 -10

-140~-43 N/A dBm -140~-43 -113

-40~-6 N/A 0.5dB -20~-3 -14

-140~-43 N/A dBm -140~-43 -120

-40~-6 N/A 0.5dB -20~-3 -14

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

-110~-48 N/A dBm -110~-48 -100

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

-110~-48 N/A dBm -110~-48 -98

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

-48~0 N/A 0.5dB -24~0 -24

-120~-25 N/A dBm -120~-25 -103

0~30 N/A 0.5dB 0~15 0

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 320ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
-48~0 N/A 0.5dB -24~0 -18

-120~-25 N/A dBm -120~-25 -101

0~255 N/A None 0~255 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(FALSE)
TRUE(TRUE)
0~7 N/A None 0~7 1

-35~62 N/A dBm -35~62 0

-31~66 N/A dBm -31~66 0

0~255 N/A None 0~255 None

-30~30 N/A 0.5dB -15~15 -13

0~30 N/A 0.5dB 0~15 4

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

1~8 N/A None 1~8 8

r1(1), r2(2), r4(4),

r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None Infinity(Infinity)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)
 120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 5120ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12

SAME_AS_TRIG_
SAME_AS_TRIG_ SAME_AS_TRIG_
QUAN(Same as None BOTH
QUAN~0, BOTH~1 QUAN, BOTH
Trig Quan), BOTH

RSRP, RSRQ RSRP~0, RSRQ~1 None RSRP, RSRQ RSRP

-30~30 N/A 0.5dB -15~15 -13

1~8 N/A None 1~8 6

RSRP(RSRP),
RSRP~0, RSRQ~1 None RSRP, RSRQ RSRP(RSRP)
RSRQ(RSRQ)
SAME_AS_TRIG_
QUAN(Same as SAME_AS_TRIG_ SAME_AS_TRIG_
None BOTH(Both)
Trig Quan), QUAN~0, BOTH~1 QUAN, BOTH
BOTH(Both)

1~8 N/A None 1~8 3

RSRP(RSRP),
RSRP~0, RSRQ~1 None RSRP, RSRQ RSRP(RSRP)
RSRQ(RSRQ)

SAME_AS_TRIG_
QUAN(Same as SAME_AS_TRIG_ SAME_AS_TRIG_
None BOTH(Both)
Trig Quan), QUAN~0, BOTH~1 QUAN, BOTH
BOTH(Both)

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
-140~-43 N/A dBm -140~-43 -105

-40~-6 N/A 0.5dB -20~-3 -20

-140~-43 N/A dBm -140~-43 -109

-40~-6 N/A 0.5dB -20~-3 -24

0~30 N/A 0.5dB 0~15 2

-140~-43 N/A dBm -140~-43 -105

-40~-6 N/A 0.5dB -20~-3 -20

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

-140~-43 N/A dBm -140~-43 -103

-40~-6 N/A 0.5dB -20~-3 -18

-140~-43 N/A dBm -140~-43 -85

-40~-6 N/A 0.5dB -20~-3 -16

-30~30 N/A 0.5dB -15~15 2

-140~-43 N/A dBm -140~-43 -95

-140~-43 N/A dBm -140~-43 -99

-140~-43 N/A dBm -140~-43 -87

-40~-6 N/A 0.5dB -20~-3 -20

-141~-43 N/A dBm -141~-43 -90

-140~-43 N/A dBm -140~-43 -109

-40~-6 N/A 0.5dB -20~-3 -24

-140~-43 N/A dBm -140~-43 -130

-40~-6 N/A 0.5dB -20~-3 -36
-140~-43 N/A dBm -140~-43 -43
-40~-6 N/A 0.5dB -20~-3 -24
-20~20 N/A None -20~20 0

-40~-6 N/A 0.5dB -20~-3 -20

-40~-6 N/A 0.5dB -20~-3 -24

-140~-43 N/A dBm -140~-43 -103

-40~-6 N/A 0.5dB -20~-3 -18

0~255 N/A None 0~255 None

0~9 N/A None 0~9 None

0~30 N/A 0.5dB 0~15 2

-30~30 N/A 0.5dB -15~15 2

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 320ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
0~255 N/A None 0~255 None

1~9 N/A None 1~9 None

arameter0_bit10), ~6, Off,

RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~5 N/A None 0~5 None

1~32 characters N/A None 1~32 characters None

CNOPERATOR_PR
IMARY(Primary CNOPERATOR_PR CNOPERATOR_PR
Operator), IMARY~0, IMARY,
None None
CNOPERATOR_SE CNOPERATOR_SE CNOPERATOR_SE
CONDARY(Second CONDARY~1 CONDARY
ary Operator)

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

0~5 N/A None 0~5 None

0~5 N/A None 0~5 None

0~5 N/A None 0~5 None

0~5 N/A None 0~5 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
1~15 N/A None 1~15 1
1~15 N/A None 1~15 1

ALL_OUTPUT(All
Output),
ABNORMAL_NOR ALL_OUTPUT~0,
ALL_OUTPUT,
MAL_SAMPLE(Abn ABNORMAL_NOR ABNORMAL_ALL_
ABNORMAL_NOR
ormal Normal MAL_SAMPLE~1, NORMAL_SAMPLE
None MAL_SAMPLE,
Sample), ABNORMAL_ALL_ (Abnormal All
ABNORMAL_ALL_
ABNORMAL_ALL_ NORMAL_SAMPLE Normal Sample)
NORMAL_SAMPLE
NORMAL_SAMPLE ~2
(Abnormal All
Normal Sample)

0~100 N/A % 0~100 90

0~65535 N/A None 0~65535 4000

FIXED_TIME(Fixed
FIXED_TIME~0,
Time), FIXED_TIME, FIXED_TIME(Fixed
NON_FIXED_TIME None
NON_FIXED_TIME NON_FIXED_TIME Time)
~1
(Non-Fixed Time)

INDEPENDENT(Ind
ependent Operator
Mode),
SHARED_FREQ(S
INDEPENDENT~0,
hared Frequency INDEPENDENT,
SHARED_FREQ~1,
Sharing Mode), SHARED_FREQ, INDEPENDENT(Ind
SEPARATED_FRE
SEPARATED_FRE None SEPARATED_FRE ependent Operator
Q~2,
Q(Separate Q, Mode)
HYBRID_SHARED
Frequency Sharing HYBRID_SHARED
~3
Mode),
HYBRID_SHARED(
Hybrid RAN
Sharing)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

X2_OVER_OSS(X2
SonLink is set up
X2_OVER_OSS(X2
over OSS), X2_OVER_OSS~0, X2_OVER_OSS,
None SonLink is set up
X2_OVER_S1(X2S X2_OVER_S1~1 X2_OVER_S1
over OSS)
onLink is set up
over S1)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

 LCG_PROFILE_0~
0,
LCG_PROFILE_0, LCG_PROFILE_0,
LCG_PROFILE_1~
LCG_PROFILE_1, None LCG_PROFILE_1, LCG_PROFILE_0
1,
LCG_PROFILE_2 LCG_PROFILE_2
LCG_PROFILE_2~
2

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

SELECTED_PLMNI
SELECTED_PLMNI SELECTED_PLMNI
D~1, SELECTED_PLMNI
D, None D,
PRIMARY_PLMNID D
PRIMARY_PLMNID PRIMARY_PLMNID
~2

NULL~0,
NULL, BASED_ON_RIM~ NULL,
BASED_ON_RIM, 1, None BASED_ON_RIM, NULL
BASED_ON_ECO BASED_ON_ECO~ BASED_ON_ECO
2
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~6000 N/A None 0~6000 0

0~50400 N/A min 0~50400 0

PrivateCoding, PrivateCoding~0, PrivateCoding,

None PrivateCoding
StandardCoding StandardCoding~1 StandardCoding
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

 RrcSetupOptSwitch RrcSetupOptSwitch
RrcSetupOptSwitch ~0, RrcSetupOptSwitch :Off,
, IucsRrcRecfgMcCo , IucsRrcRecfgMcCo
IucsRrcRecfgMcCo mbSwitch~1, IucsRrcRecfgMcCo mbSwitch:Off,
mbSwitch, RcrpRrcRecfgMcCo mbSwitch, RcrpRrcRecfgMcCo
RcrpRrcRecfgMcCo mbSwitch~2, RcrpRrcRecfgMcCo mbSwitch:Off,
mbSwitch, RrcRecfgMcOptSwi mbSwitch, RrcRecfgMcOptSwi
RrcRecfgMcOptSwi tch~3, RrcRecfgMcOptSwi tch:Off,
tch, IdleCsfbRedirectOp tch, IdleCsfbRedirectOp
None
IdleCsfbRedirectOp tSwitch~4, IdleCsfbRedirectOp tSwitch:Off,
tSwitch, UlNasBufferSwitch~ tSwitch, UlNasBufferSwitch:
UlNasBufferSwitch, 5, UlNasBufferSwitch, Off,
IratMeasCfgTransS IratMeasCfgTransS IratMeasCfgTransS IratMeasCfgTransS
witch, witch~6, witch, witch:Off,
GeranAnrMcOptSwi GeranAnrMcOptSwi GeranAnrMcOptSwi GeranAnrMcOptSwi
tch, tch~7, tch, tch:Off,
InactDiscardSwitch InactDiscardSwitch InactDiscardSwitch InactDiscardSwitch:
~8 Off
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

ACTIVE_CELL(Acti
ACTIVE_CELL~0, ACTIVE_CELL,
ve Cell), ACTIVE_CELL(Acti
CONFIGURED_CE None CONFIGURED_CE
CONFIGURED_CE ve Cell)
LL~1 LL
LL(Configured Cell)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

r1(1), r2(2), r3(3), r1~0, r2~1, r3~2,

r1, r2, r3, r4, r5,
r4(4), r5(5), r4~3, r5~4, None Infinity(Infinity)
Infinity
Infinity(Infinity) Infinity~5
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

v32(v32), v64(v64),
v32~0, v64~1, v32, v64, v128,
v128(v128), None v32(v32)
v128~2, v256~3 v256
v256(v256)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

RimUtranSwitch(Ri
mUtranSwitch), RimUtranSwitch~0, RimUtranSwitch, RimUtranSwitch:Off
None
EcoSwitch(EcoSwit EcoSwitch~1 EcoSwitch , EcoSwitch:Off
ch)

SupportS1UeCapM
SupportS1UeCapM SupportS1UeCapM SupportS1UeCapM
atchMsg(SupportS1 None
atchMsg~0 atchMsg atchMsg:Off
UeCapMatchMsg)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

MMESELECTALGO
SWITCHFORGUUE MMESELECTALGO MMESELECTALGO
MMESELECTALGO
(MMESELECTALG SWITCHFORGUUE None SWITCHFORGUUE
SWITCHFORGUUE
OSWITCHFORGU ~0 :Off
UE)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

 CaGapMeasPriOffS CaGapMeasPriOffS
CaGapMeasPriOffS CaGapMeasPriOffS
witch~0, witch:Off,
witch, witch,
CaHoReqWithR9Co CaHoReqWithR9Co
CaHoReqWithR9Co CaHoReqWithR9Co
nfigSwitch~1, nfigSwitch:Off,
nfigSwitch, nfigSwitch,
NasSecProcSwitch NasSecProcSwitch:
NasSecProcSwitch, NasSecProcSwitch,
~2, Off,
AntennaFullConfigS AntennaFullConfigS
AntennaFullConfigS AntennaFullConfigS
witch, None witch,
witch~3, witch:Off,
DrxConfigMsgSwitc DrxConfigMsgSwitc
DrxConfigMsgSwitc DrxConfigMsgSwitc
h, h,
h~4, h:Off,
MultiplexingTabSel MultiplexingTabSel
MultiplexingTabSel MultiplexingTabSel
Switch, Switch,
Switch~5, Switch:Off,
SCellModCaMeasR SCellModCaMeasR
SCellModCaMeasR SCellModCaMeasR
mvSwitch mvSwitch
mvSwitch~6 mvSwitch:Off

BASED_TNL(Base
d on TNL), BASED_TNL~0, BASED_TNL,
BASED_TNL(Base
BASED_X2INTERF BASED_X2INTERF None BASED_X2INTERF
d on TNL)
ACE(Based on X2 ACE~1 ACE
Interface)
BASED_ON_X2FA
ULT(Based on X2
Fault),
BASED_ON_X2FA BASED_ON_X2FA BASED_ON_X2FA
BASED_ON_X2US
ULT~0, ULT, ULT:Off,
AGE_WITH_NEGO
BASED_ON_X2US BASED_ON_X2US BASED_ON_X2US
(Based on X2
AGE_WITH_NEGO AGE_WITH_NEGO AGE_WITH_NEGO
Usage with None
~1, , :Off,
Negotiation),
BASED_ON_X2US BASED_ON_X2US BASED_ON_X2US
BASED_ON_X2US
AGE_WITHOUT_N AGE_WITHOUT_N AGE_WITHOUT_N
AGE_WITHOUT_N
EGO~2 EGO EGO:Off
EGO(Based on X2
Usage Without
Negotiation)
1~50400 N/A min 1~50400 10080
1~50400 N/A min 1~50400 10080
0~10000 N/A None 0~10000 0
0~10000 N/A None 0~10000 0
DISABLE(disable), DISABLE~0,
None DISABLE, ENABLE ENABLE(enable)
ENABLE(enable) ENABLE~1

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

MAX_SYNC_USER
_1200(MAX_SYNC
_USER_1200),
MAX_SYNC_USER MAX_SYNC_USER
MAX_SYNC_USER
_1200~0, _1200,
_1800(MAX_SYNC
MAX_SYNC_USER MAX_SYNC_USER
_USER_1800),
_1800~1, _1800,
MAX_SYNC_USER MAX_SYNC_USER
MAX_SYNC_USER MAX_SYNC_USER
_2400(MAX_SYNC None _1200(MAX_SYNC
_2400~2, _2400,
_USER_2400), _USER_1200)
MAX_SYNC_USER MAX_SYNC_USER
MAX_SYNC_USER
_3000~3, _3000,
_3000(MAX_SYNC
MAX_SYNC_USER MAX_SYNC_USER
_USER_3000),
_3600~4 _3600
MAX_SYNC_USER
_3600(MAX_SYNC
_USER_3600)

TIMETOWAIT_NOT
CARRY(TIMETOW
AIT_NOTCARRY),
TIMETOWAIT_NOT
TIMETOWAIT_1s(T
CARRY~0,
IMETOWAIT_1s),
TIMETOWAIT_1s~
TIMETOWAIT_2s(T
1, TIMETOWAIT_NOT
IMETOWAIT_2s),
TIMETOWAIT_2s~ CARRY,
TIMETOWAIT_5s(T
2, TIMETOWAIT_1s,
IMETOWAIT_5s),
TIMETOWAIT_5s~ TIMETOWAIT_2s,
TIMETOWAIT_10s( TIMETOWAIT_DEF
3, TIMETOWAIT_5s,
TIMETOWAIT_10s) None AULT(TIMETOWAI
TIMETOWAIT_10s TIMETOWAIT_10s,
, T_DEFAULT)
~4, TIMETOWAIT_20s,
TIMETOWAIT_20s(
TIMETOWAIT_20s TIMETOWAIT_60s,
TIMETOWAIT_20s)
~5, TIMETOWAIT_DEF
,
TIMETOWAIT_60s AULT
TIMETOWAIT_60s(
~6,
TIMETOWAIT_60s)
TIMETOWAIT_DEF
,
AULT~7
TIMETOWAIT_DEF
AULT(TIMETOWAI
T_DEFAULT)
0~2000 N/A None 0~2000 0
5~50400 N/A min 5~50400 30
BASED_ON_EX2F
BASED_ON_EX2F BASED_ON_EX2F BASED_ON_EX2F
AULT(Based on None
AULT~0 AULT AULT:On
EX2 Fault)
60~50400 N/A min 60~50400 10080

ALL_FREE_MODE(
ALL_FREE_MODE
All free mode), ALL_FREE_MODE,
~0,
HUAWEI_FREE_O HUAWEI_FREE_O ALL_FREE_MODE(
HUAWEI_FREE_O None
THER_CONTROLL THER_CONTROLL All free mode)
THER_CONTROLL
ED(HW free other ED
ED~1
controlled)
1~10000 N/A None 1~10000 1
1~50400 N/A min 1~50400 10080

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

FreqAddCtrl(FreqA
FreqAddCtrl~0 None FreqAddCtrl FreqAddCtrl:On
ddCtrl)

0~100 N/A None 0~100 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
AbnormalUeHandle
Switch(AbnormalUe AbnormalUeHandle AbnormalUeHandle AbnormalUeHandle
HandleSwitch), Switch~0, Switch, Switch:Off,
None
UltraFlashCsfbCom UltraFlashCsfbCom UltraFlashCsfbCom UltraFlashCsfbCom
OptSw(UltraFlashC OptSw~1 OptSw OptSw:Off
sfbComOptSw)

UeTypeRecogSwitc
UeTypeRecogSwitc UeTypeRecogSwitc UeTypeRecogSwitc
h(UeTypeRecogSwi None
h~0 h h:Off
tch)
HUAWEI_S1_SCT
P_ABORT_SMOOT
H_SW(Huawei S1 HUAWEI_S1_SCT HUAWEI_S1_SCT HUAWEI_S1_SCT
SCTP Abort P_ABORT_SMOOT P_ABORT_SMOOT P_ABORT_SMOOT
Smooth Sw), H_SW~0, H_SW, H_SW:Off,
None
OTHER_S1_SCTP OTHER_S1_SCTP OTHER_S1_SCTP OTHER_S1_SCTP
_ABORT_SMOOTH _ABORT_SMOOTH _ABORT_SMOOTH _ABORT_SMOOTH
_SW(Other S1 _SW~1 _SW _SW:Off
SCTP Abort
Smooth Sw)

0~5 N/A None 0~5 None

1~100 N/A % 1~100 None

0~100 N/A % 0~100 0

0~255 N/A None 0~255 None

1~58 N/A 10240ms 10240~593920 58

MBMS_RSVD_CEL
MBMS_RSVD_CEL MBMS_RSVD_CEL
L(ReservedCell),
L~0, L,
MBMS_NON_RSV None None
MBMS_NON_RSV MBMS_NON_RSV
D_CELL(NoneRese
D_CELL~1 D_CELL
rvedCell)

0~255 N/A None 0~255 None

SessionForMultiMA
SessionForMultiMA SessionForMultiMA SessionForMultiMA
Switch(Session For None
Switch~0 Switch Switch:Off
Multi MA Switch)

0~9 N/A None 0~9 None

0~50000 N/A kbit/s 0~50000 0

0~50000 N/A kbit/s 0~50000 0

1~300 N/A s 1~300 1

1~300 N/A s 1~300 300

0~5 N/A None 0~5 None

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~19 N/A None 0~19 None

0~4294967295 N/A None 0~4294967295 None

Level_1_Output(Le
vel_1_Ouput), Level_1_Output~0, Level_1_Output,
None None
Level_2_Output(Le Level_2_Output~1 Level_2_Output
vel_2_Ouput)

SamplingEnable(Sa
mplingEnable), SamplingEnable~0, SamplingEnable,
None None
SamplingUnable(Sa SamplingUnable~1 SamplingUnable
mplingUnable)

0 N/A None 0 None

CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP CP_CFG, UP_CFG, CP_UP_CFG(CPU
UP_CFG~1, None
Config), CP_UP_CFG P Config)
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

0~256 characters N/A None 0~256 characters NULL(empty string)

0~65535 N/A None 0~65535 None

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

0~65535 N/A None 0~65535 None

S1(S1), X2(X2) S1~0, X2~1 None S1, X2 None

0~31 N/A None 0~31 None

0~65535 N/A None 0~65535 None

0 N/A None 0 None

0~65535 N/A None 0~65535 None

0~256 characters N/A None 0~256 NULL(empty string)

0 N/A None 0 None

0~65535 N/A None 0~65535 None

0~256 characters N/A None 0~256 characters NULL(empty string)

0~65535 N/A None 0~65535 None

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

0~65535 N/A None 0~65535 None

0~150 characters N/A None 0~150 None

0~20 characters N/A None 0~20 None

Null(NULL),
LowerLinkFault(Low
er Layer Link Fault),
SetupFail(Setup Null~0,
Null,
Failure), LowerLinkFault~1,
LowerLinkFault,
CfgErr(Configuratio SetupFail~2,
SetupFail, CfgErr,
n Error), CfgErr~3, None None
CellNotAvailable,
CellNotAvailable(e CellNotAvailable~4,
NoLicense,
MBMS Cell Not NoLicense~5,
Undefine
Available), Undefine~255
NoLicense(License
Restriction),
Undefine(Undefine)

0~560 characters N/A None 0~560 characters None

0~31 N/A None 0~31 None

0~5 N/A None 0~5 None

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

Release_R8(Releas
e 8),
Release_R9(Releas Release_R8~0, Release_R8,
e 9), Release_R9~1, Release_R9, Release_R8(Releas
None
Release_R10(Rele Release_R10~2, Release_R10, e 8)
ase 10), Release_R11~3 Release_R11
Release_R11(Relea
se 11)

0~256 characters N/A None 0~256 characters NULL(empty string)

CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP CP_CFG, UP_CFG, CP_UP_CFG(CPU
UP_CFG~1, None
Config), CP_UP_CFG P Config)
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)
0~255 N/A None 0~255 255

0~5,255 N/A None 0~5,255 255

0~31 N/A None 0~31 None

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE None
TRUE(TRUE)

0~65535 N/A None 0~65535 None

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2
0~31 N/A None 0~31 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

Release_R8(Releas
e 8),
Release_R9(Releas Release_R8~0, Release_R8,
e 9), Release_R9~1, Release_R9, Release_R8(Releas
None
Release_R10(Rele Release_R10~2, Release_R10, e 8)
ase 10), Release_R11~3 Release_R11
Release_R11(Relea
se 11)

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(FALSE)
TRUE(TRUE)

MANUAL_MODE, MANUAL_MODE~0 MANUAL_MODE,

None MANUAL_MODE
AUTO_MODE , AUTO_MODE~1 AUTO_MODE
MANUAL_CREATE
MANUAL_CREATE
(Manual Created), MANUAL_CREATE MANUAL_CREATE
~0, None
AUTO_CREATE(Au , AUTO_CREATE (Manual Created)
AUTO_CREATE~1
to Created)

0~255 N/A None 0~255 255

0~5,255 N/A None 0~5,255 255

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

FALSE(FALSE),
FALSE~0, TRUE~1, FALSE, TRUE,
TRUE(TRUE), None None
NULL~2 NULL
NULL(NULL)

0~3600 N/A None 0~3600 None

0~150 characters N/A None 0~150 characters None

0~224 characters N/A None 0~224 characters None

0~300 characters N/A None 0~300 characters NULL(empty string)

0~255 N/A None 0~255 None

NULL(NULL),
LowerLinkFault(Low
er Layer Link Fault),
MmecImpact(Mmec
Impact),
SetupFail(Setup
Failure),
CfgErr(Configuratio NULL~0,
NULL,
n Error), LowerLinkFault~1,
LowerLinkFault,
LicRestrict(License MmecImpact~2,
MmecImpact,
Restriction), SetupFail~3,
SetupFail, CfgErr,
PlmnDiff(The PLMN CfgErr~4, None None
LicRestrict,
of the operator LicRestrict~5,
PlmnDiff,
owning the S1 PlmnDiff~6,
TacNotCfg,
interface is not TacNotCfg~7,
Undefine
supported by the Undefine~255
MME),
TacNotCfg(The TAC
for the operator
owning the S1
interface is not
configured),
Undefine(Undefine)

0 N/A None 0 None

CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP CP_CFG, UP_CFG, CP_UP_CFG(CPU
UP_CFG~1, None
Config), CP_UP_CFG P Config)
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)
0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

0~256 characters N/A None 0~256 characters NULL(empty string)

0~65535 N/A None 0~65535 None

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

S1AP(S1AP),
S1AP~0, X2AP~1,
X2AP(X2AP), None S1AP, X2AP, RRC None
RRC~2
RRC(RRC)

0~65535 N/A None 0~65535 None

DISCARD~0,
DISCARD, MODIFY None DISCARD, MODIFY None
MODIFY~1

ZERO, ONE, TWO, ZERO~0, ONE~1, ZERO, ONE, TWO,

None None
THREE TWO~2, THREE~3 THREE

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

ZERO, ONE, TWO, ZERO~0, ONE~1, ZERO, ONE, TWO,

None ZERO
THREE TWO~2, THREE~3 THREE

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

0~268435455 N/A None 0~268435455 0

1~800 N/A None 1~800 1

0~100 characters N/A None 0~100 characters 0

0~4294967295 N/A None 0~4294967295 None

0~7 N/A None 0~7 0

0~1 N/A None 0~1 0

0~6 N/A None 0~6 None

LTE_FDD_ONLY(L
TE FDD Only), LTE_FDD_ONLY~0
LTE_FDD_ONLY,
TWOMODE_NORM ,
TWOMODE_NORM
AL(Two mode TWOMODE_NORM LTE_FDD_ONLY(L
None AL,
Normal), AL~1, TE FDD Only)
THREEMODE_NO
THREEMODE_NO THREEMODE_NO
RMAL
RMAL(Three mode RMAL~2
Normal)

BLOCKED(Blocked
), BLOCKED~0, BLOCKED, UNBLOCKED(Unbl
None
UNBLOCKED(Unbl UNBLOCKED~1 UNBLOCKED ocked)
ocked)

ENABLED(Enabled
), ENABLED~0, ENABLED,
None None
DISABLED(Disable DISABLED~1 DISABLED
d)

0~4294967295 N/A None 0~4294967295 None

0~7 N/A None 0~7 0

0~1 N/A None 0~1 0

0~6 N/A None 0~6 None

LTE_TDD_ONLY(L
TE TDD Only), LTE_TDD_ONLY~0
LTE_TDD_ONLY,
TWOMODE_NORM ,
TWOMODE_NORM
AL(Two mode TWOMODE_NORM LTE_TDD_ONLY(L
None AL,
Normal), AL~1, TE TDD Only)
THREEMODE_NO
THREEMODE_NO THREEMODE_NO
RMAL
RMAL(Three mode RMAL~2
Normal)

BLOCKED(Blocked
), BLOCKED~0, BLOCKED, UNBLOCKED(Unbl
None
UNBLOCKED(Unbl UNBLOCKED~1 UNBLOCKED ocked)
ocked)
ENABLED(Enabled
), ENABLED~0, ENABLED,
None None
DISABLED(Disable DISABLED~1 DISABLED
d)

0~3 N/A None 0~3 None

CP_UP_CFG(CPU CP_UP_CFG(CPU
CP_UP_CFG~2 None CP_UP_CFG
P Config) P Config)

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

IDEAL(Ideal
Backhaul), IDEAL~0, IDEAL,
None None
NON_IDEAL(Non- NON_IDEAL~1 NON_IDEAL
Ideal Backhaul)

0~256 characters N/A None 0~256 characters None

0~95 N/A None 0~95 None

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

0~65535 N/A None 0~65535 None

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

0~31 N/A None 0~31 None

DISABLE(disable), DISABLE~0,
None DISABLE, ENABLE DISABLE(disable)
ENABLE(enable) ENABLE~1

0~11 N/A None 0~11 None

0~5 N/A None 0~5 None

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

Release_R8(Releas
e 8),
Release_R9(Releas Release_R8~0, Release_R8,
e 9), Release_R9~1, Release_R9, Release_R10(Rele
None
Release_R10(Rele Release_R10~2, Release_R10, ase 10)
ase 10), Release_R11~3 Release_R11
Release_R11(Relea
se 11)

0~256 characters N/A None 0~256 characters NULL(empty string)

CP_CFG(CP
Config),
CP_CFG~0,
UP_CFG(UP CP_CFG, UP_CFG, CP_UP_CFG(CPU
UP_CFG~1, None
Config), CP_UP_CFG P Config)
CP_UP_CFG~2
CP_UP_CFG(CPU
P Config)

0~5,255 N/A None 0~5,255 255

Normal(Normal), Normal~0,
Normal, Abnormal,
Abnormal(Abnormal Abnormal~1, None None
Blocked
), Blocked(Blocked) Blocked~2

0~65535 N/A None 0~65535 None

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

0~65535 N/A None 0~65535 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

X2_BLACK_LIST_T
YPE(X2 Black List X2_BLACK_LIST_T X2_BLACK_LIST_T
X2_BLACK_LIST_T
Type), YPE~0, YPE,
None YPE(X2 Black List
X2_WHITE_LIST_T X2_WHITE_LIST_T X2_WHITE_LIST_T
Type)
YPE(X2 White List YPE~1 YPE
Type)

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

0~5 N/A None 0~5 None

Release_R8(Releas
e 8),
Release_R9(Releas Release_R8~0, Release_R8,
e 9), Release_R9~1, Release_R9, Release_R10(Rele
None
Release_R10(Rele Release_R10~2, Release_R10, ase 10)
ase 10), Release_R11~3 Release_R11
Release_R11(Relea
se 11)

MANUAL_MODE, MANUAL_MODE~0 MANUAL_MODE,

None MANUAL_MODE
AUTO_MODE , AUTO_MODE~1 AUTO_MODE
MANUAL_CREATE
MANUAL_CREATE
(Manual Created), MANUAL_CREATE MANUAL_CREATE
~0, None
AUTO_CREATE(Au , AUTO_CREATE (Manual Created)
AUTO_CREATE~1
to Created)

0~5,255 N/A None 0~5,255 255

0~50 characters N/A None 0~50 characters None

0~50 characters N/A None 0~50 characters None

Normal(Normal),
Normal~0,
Abnormal(Abnormal None Normal, Abnormal None
Abnormal~1
)

SCTP_LINK_FAUL
T(SCTP Link
Failure),
SETUP_FAILURE_ SCTP_LINK_FAUL
OCCUR(Setup T~0, SCTP_LINK_FAULT
Failure), SETUP_FAILURE_ ,
PEERIN_BLACK_L OCCUR~1, SETUP_FAILURE_
IST(Peer eNodeB PEERIN_BLACK_L OCCUR,
Blacklisted), IST~2, None PEERIN_BLACK_L None
STATE_NORMAL(N STATE_NORMAL~ IST,
ULL), 3, STATE_NORMAL,
SETUP_ONLY_ON SETUP_ONLY_ON SETUP_ONLY_ON
E_LINK_ALLOWED E_LINK_ALLOWED E_LINK_ALLOWED
(Only one interface ~4
allowed to be setup
between two logical
eNodeBs)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

SF10(10
subframes),
SF20(20
subframes),
SF32(32
subframes),
SF40(40
subframes),
SF64(64
subframes),
SF10~0, SF20~1,
SF80(80
SF32~2, SF40~3,
subframes),
SF64~4, SF80~5,
SF128(128
SF128~6, SF10, SF20, SF32,
subframes),
SF160~7, SF40, SF64, SF80,
SF160(160
SF256~8, SF128, SF160,
subframes), SF10(10
SF320~9, subframe SF256, SF320,
SF256(256 subframes)
SF512~10, SF512, SF640,
subframes),
SF640~11, SF1024, SF1280,
SF320(320
SF1024~12, SF2048, SF2560
subframes),
SF1280~13,
SF512(512
SF2048~14,
subframes),
SF2560~15
SF640(640
subframes),
SF1024(1024
subframes),
SF1280(1280
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
PSF1(1 PDCCH
subframe), PSF2(2
PDCCH
subframes), PSF3(3
PDCCH
subframes), PSF4(4
PDCCH
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
PSF1~0, PSF2~1,
subframes), PSF8(8
PSF3~2, PSF4~3,
PDCCH
PSF5~4, PSF6~5,
subframes), PSF1, PSF2, PSF3,
PSF8~6, PSF10~7,
PSF10(10 PDCCH PSF4, PSF5, PSF6,
PSF20~8,
subframes), PSF8, PSF10,
PSF30~9, PSF5(5 PDCCH
PSF20(20 PDCCH subframe PSF20, PSF30,
PSF40~10, subframes)
subframes), PSF40, PSF50,
PSF50~11,
PSF30(30 PDCCH PSF60, PSF80,
PSF60~12,
subframes), PSF100, PSF200
PSF80~13,
PSF40(40 PDCCH
PSF100~14,
subframes),
PSF200~15
PSF50(50 PDCCH
subframes),
PSF60(60 PDCCH
subframes),
PSF80(80 PDCCH
subframes),
PSF100(100
PDCCH
subframes),
PSF200(200
PDCCH subframes)
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8, PSF1, PSF2, PSF3,
subframes),
PSF30~9, PSF4, PSF5, PSF6,
PSF50(50 PDCCH
PSF40~10, PSF8, PSF10,
subframes),
PSF50~11, PSF20, PSF30,
PSF60(60 PDCCH
PSF60~12, PSF40, PSF50, PSF10(10 PDCCH
subframes), subframe
PSF80~13, PSF60, PSF80, subframes)
PSF80(80 PDCCH
PSF100~14, PSF100, PSF200,
subframes),
PSF200~15, PSF300, PSF500,
PSF100(100
PSF300~16, PSF750, PSF1280,
PDCCH
PSF500~17, PSF1920, PSF2560
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280

UU_DISABLE(Disa
ble), UU_DISABLE~0, UU_DISABLE, UU_DISABLE(Disa
None
UU_ENABLE(Enabl UU_ENABLE~1 UU_ENABLE ble)
e)
SF2(2 subframes),
SF5(5 subframes),
SF8(8 subframes),
SF10(10
subframes),
SF16(16
subframes),
SF20(20
subframes),
SF32(32 SF2~0, SF5~1,
subframes), SF8~2, SF10~3,
SF40(40 SF16~4, SF20~5, SF2, SF5, SF8,
subframes), SF32~6, SF40~7, SF10, SF16, SF20,
SF64(64 SF64~8, SF80~9, SF32, SF40, SF64,
SF10(10
subframes), SF128~10, subframe SF80, SF128,
subframes)
SF80(80 SF160~11, SF160, SF256,
subframes), SF256~12, SF320, SF512,
SF128(128 SF320~13, SF640
subframes), SF512~14,
SF160(160 SF640~15
subframes),
SF256(256
subframes),
SF320(320
subframes),
SF512(512
subframes),
SF640(640
subframes)
1~16 N/A None 1~16 1

SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF128, SF160,
SF512(512 SF320~9,
SF256, SF320,
subframes), SF512~10, SF320(320
subframe SF512, SF640,
SF640(640 SF640~11, subframes)
SF1024, SF1280,
subframes), SF1024~12,
SF2048, SF2560
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)
SF128(128
subframes),
SF160(160
subframes),
SF256(256
subframes), SF128~6,
SF320(320 SF160~7,
subframes), SF256~8,
SF128, SF160,
SF512(512 SF320~9,
SF256, SF320,
subframes), SF512~10, SF1280(1280
subframe SF512, SF640,
SF640(640 SF640~11, subframes)
SF1024, SF1280,
subframes), SF1024~12,
SF2048, SF2560
SF1024(1024 SF1280~13,
subframes), SF2048~14,
SF1280(1280 SF2560~15
subframes),
SF2048(2048
subframes),
SF2560(2560
subframes)

subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8, PSF1, PSF2, PSF3,
subframes),
PSF30~9, PSF4, PSF5, PSF6,
PSF50(50 PDCCH
PSF40~10, PSF8, PSF10,
subframes),
PSF50~11, PSF20, PSF30,
PSF60(60 PDCCH
PSF60~12, PSF40, PSF50, PSF200(200
subframes), subframe
PSF80~13, PSF60, PSF80, PDCCH subframes)
PSF80(80 PDCCH
PSF100~14, PSF100, PSF200,
subframes),
PSF200~15, PSF300, PSF500,
PSF100(100
PSF300~16, PSF750, PSF1280,
PDCCH
PSF500~17, PSF1920, PSF2560
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280
subframes), PSF5(5
PDCCH
subframes), PSF6(6
PDCCH
subframes), PSF8(8
PDCCH
subframes),
PSF10(10 PDCCH
subframes),
PSF20(20 PDCCH
PSF1~0, PSF2~1,
subframes),
PSF3~2, PSF4~3,
PSF30(30 PDCCH
PSF5~4, PSF6~5,
subframes),
PSF8~6, PSF10~7,
PSF40(40 PDCCH
PSF20~8, PSF1, PSF2, PSF3,
subframes),
PSF30~9, PSF4, PSF5, PSF6,
PSF50(50 PDCCH
PSF40~10, PSF8, PSF10,
subframes),
PSF50~11, PSF20, PSF30,
PSF60(60 PDCCH
PSF60~12, PSF40, PSF50, PSF100(100
subframes), subframe
PSF80~13, PSF60, PSF80, PDCCH subframes)
PSF80(80 PDCCH
PSF100~14, PSF100, PSF200,
subframes),
PSF200~15, PSF300, PSF500,
PSF100(100
PSF300~16, PSF750, PSF1280,
PDCCH
PSF500~17, PSF1920, PSF2560
subframes),
PSF750~18,
PSF200(200
PSF1280~19,
PDCCH
PSF1920~20,
subframes),
PSF2560~21
PSF300(300
PDCCH
subframes),
PSF500(500
PDCCH
subframes),
PSF750(750
PDCCH
subframes),
PSF1280(1280

10~254 N/A None 10~254 None

IMSSignalling(IMS
Signalling),
IMSSignalling~5, IMSSignalling,
LowDelay(Low TCPorBuffStreamin
LowDelay~7, LowDelay,
Delay), None g(TCP Based or
TCPorBuffStreamin TCPorBuffStreamin
TCPorBuffStreamin Buffered Streaming)
g~9 g
g(TCP Based or
Buffered Streaming)
1~1000 N/A None 0.001~1, step:0.001 700

1~1000 N/A None 0.001~1, step:0.001 700

MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
MinGbrRate_0_KB,
1kB/s), ~8000,
MinGbrRate_1_KB,
MinGbrRate_2_KB( MinGbrRate_2_KB
MinGbrRate_2_KB,
2kB/s), ~16000,
MinGbrRate_4_KB,
MinGbrRate_4_KB( MinGbrRate_4_KB
MinGbrRate_8_KB,
4kB/s), ~32000,
MinGbrRate_16_K
MinGbrRate_8_KB( MinGbrRate_8_KB
B,
8kB/s), ~64000,
MinGbrRate_32_K
MinGbrRate_16_K MinGbrRate_16_K MinGbrRate_1_KB(
kB/s B,
B(16kB/s), B~128000, 1kB/s)
MinGbrRate_64_K
MinGbrRate_32_K MinGbrRate_32_K
B,
B(32kB/s), B~256000,
MinGbrRate_128_K
MinGbrRate_64_K MinGbrRate_64_K
B,
B(64kB/s), B~512000,
MinGbrRate_256_K
MinGbrRate_128_K MinGbrRate_128_K
B,
B(128kB/s), B~1024000,
MinGbrRate_512_K
MinGbrRate_256_K MinGbrRate_256_K
B
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000
MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
MinGbrRate_0_KB,
1kB/s), ~8000,
MinGbrRate_1_KB,
MinGbrRate_2_KB( MinGbrRate_2_KB
MinGbrRate_2_KB,
2kB/s), ~16000,
MinGbrRate_4_KB,
MinGbrRate_4_KB( MinGbrRate_4_KB
MinGbrRate_8_KB,
4kB/s), ~32000,
MinGbrRate_16_K
MinGbrRate_8_KB( MinGbrRate_8_KB
B,
8kB/s), ~64000,
MinGbrRate_32_K
MinGbrRate_16_K MinGbrRate_16_K MinGbrRate_1_KB(
kB/s B,
B(16kB/s), B~128000, 1kB/s)
MinGbrRate_64_K
MinGbrRate_32_K MinGbrRate_32_K
B,
B(32kB/s), B~256000,
MinGbrRate_128_K
MinGbrRate_64_K MinGbrRate_64_K
B,
B(64kB/s), B~512000,
MinGbrRate_256_K
MinGbrRate_128_K MinGbrRate_128_K
B,
B(128kB/s), B~1024000,
MinGbrRate_512_K
MinGbrRate_256_K MinGbrRate_256_K
B
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000

0~10 N/A None 0~1, step:0.1 10

0~39 N/A None 0~39 0

PBR_0_KBps(0kB/
s),
PBR_8_KBps(8kB/
s),
PBR_16_KBps(16k PBR_0_KBps~0, PBR_0_KBps,
B/s), PBR_8_KBps~1, PBR_8_KBps,
PBR_32_KBps(32k PBR_16_KBps~2, PBR_16_KBps,
B/s), PBR_32_KBps~3, PBR_32_KBps, PBR_8_KBps(8kB/
kB/s
PBR_64_KBps(64k PBR_64_KBps~4, PBR_64_KBps, s)
B/s), PBR_128_KBps~5, PBR_128_KBps,
PBR_128_KBps(12 PBR_256_KBps~6, PBR_256_KBps,
8kB/s), PBR_INFINITY~7 PBR_INFINITY
PBR_256_KBps(25
6kB/s),
PBR_INFINITY(Infi
nity)

9~16 N/A None 9~16 11

0~39 N/A None 0~39 5

PAID_USER(Paid
User), PAID_USER~0, PAID_USER, PAID_USER(Paid
None
FREE_USER(Free FREE_USER~1 FREE_USER User)
User)

FLOW_CTRL(Flow
FLOW_CTRL~0,
Control), FLOW_CTRL, FLOW_CTRL(Flow
NON_FLOW_CTRL None
NON_FLOW_CTRL NON_FLOW_CTRL Control)
~1
(Non Flow Control)

NO, YES NO~0, YES~1 None NO, YES NO

EQUAL_PRI_TO_Q
CI1(Priority same EQUAL_PRI_TO_Q EQUAL_PRI_TO_Q
EQUAL_PRI_TO_Q
as QCI1), CI1~0, CI1,
None CI1(Priority same
HIGHER_PRI_THA HIGHER_PRI_THA HIGHER_PRI_THA
as QCI1)
N_QCI1(Priority N_QCI1~1 N_QCI1
Higher than QCI1)
EQUAL_PRI_TO_Q
CI1(Priority same EQUAL_PRI_TO_Q EQUAL_PRI_TO_Q
EQUAL_PRI_TO_Q
as QCI1), CI1~0, CI1,
None CI1(Priority same
HIGHER_PRI_THA HIGHER_PRI_THA HIGHER_PRI_THA
as QCI1)
N_QCI1(Priority N_QCI1~1 N_QCI1
Higher than QCI1)

0~39 N/A None 0~39 None

PS_HO~0, PS_HO:On,
PS_HO, SRVCC, PS_HO, SRVCC,
SRVCC~1, None SRVCC:Off,
REDIRECTION REDIRECTION
REDIRECTION~2 REDIRECTION:Off

SRVCC SRVCC~0 None SRVCC SRVCC:On

PS_HO~0, PS_HO:On,
PS_HO, PS_HO,
NACC_HO~1, NACC_HO:Off,
NACC_HO, NACC_HO,
CCO_HO~2, None CCO_HO:Off,
CCO_HO, SRVCC, CCO_HO, SRVCC,
SRVCC~3, SRVCC:Off,
REDIRECTION REDIRECTION
REDIRECTION~4 REDIRECTION:Off

SRVCC(CDMA1XR
SRVCC~0 None SRVCC SRVCC:On
TTHoSwitch)
OPT_HO, OPT_HO~0, OPT_HO, OPT_HO:On,
None
NON_OPT_HO NON_OPT_HO~1 NON_OPT_HO NON_OPT_HO:On

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M

PERMIT_FAST_AN
PERMIT_FAST_AN PERMIT_FAST_AN
R_MEAS_ENUM~0
R_MEAS_ENUM, R_MEAS_ENUM, PERMIT_FAST_AN
, None
FORBID_FAST_AN FORBID_FAST_AN R_MEAS_ENUM
FORBID_FAST_AN
R_MEAS_ENUM R_MEAS_ENUM
R_MEAS_ENUM~1

0~15 N/A None 0~15 12

0~15 N/A None 0~15 5

0~15 N/A None 0~15 9

0~39 N/A None 0~39 None

DiscardTimer_50(5 DiscardTimer_50~0
0), ,
DiscardTimer_100( DiscardTimer_100~
100), 1, DiscardTimer_50,
DiscardTimer_150( DiscardTimer_150~ DiscardTimer_100,
150), 2, DiscardTimer_150,
DiscardTimer_300( DiscardTimer_300~ DiscardTimer_300,
300), 3, DiscardTimer_500, DiscardTimer_Infinit
ms
DiscardTimer_500( DiscardTimer_500~ DiscardTimer_750, y(infinity)
500), 4, DiscardTimer_1500
DiscardTimer_750( DiscardTimer_750~ ,
750), 5, DiscardTimer_Infinit
DiscardTimer_1500 DiscardTimer_1500 y
(1500), ~6,
DiscardTimer_Infinit DiscardTimer_Infinit
y(infinity) y~7

RlcMode_AM(Ackn
owledge Mode),
RlcMode_AM~1, RlcMode_AM, RlcMode_AM(Ackn
RlcMode_UM(Un- None
RlcMode_UM~2 RlcMode_UM owledge Mode)
acknowledge
Mode)
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0, _t1,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1, _t2,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2, _t3,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t4(4), _t4~3, _t4, Maxretx_Threshold
None
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold _t32(32)
_t6(6), _t6~4, _t6,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5, _t8,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6, _t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7 _t32
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0, _t1,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1, _t2,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2, _t3,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t4(4), _t4~3, _t4, Maxretx_Threshold
None
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold _t32(32)
_t6(6), _t6~4, _t6,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5, _t8,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6, _t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7 _t32
PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2, PollByte_kb25,
PollByte_kb125(12
PollByte_kb100~3, PollByte_kb50,
5 kBytes),
PollByte_kb125~4, PollByte_kb75,
PollByte_kb250(25
PollByte_kb250~5, PollByte_kb100,
0 kBytes),
PollByte_kb375~6, PollByte_kb125,
PollByte_kb375(37
PollByte_kb500~7, PollByte_kb250,
5 kBytes),
PollByte_kb750~8, PollByte_kb375,
PollByte_kb500(50 PollByte_kb25(25
PollByte_kb1000~9, byte PollByte_kb500,
0 kBytes), kBytes)
PollByte_kb1250~1 PollByte_kb750,
PollByte_kb750(75
0, PollByte_kb1000,
0 kBytes),
PollByte_kb1500~1 PollByte_kb1250,
PollByte_kb1000(1
1, PollByte_kb1500,
000 kBytes),
PollByte_kb2000~1 PollByte_kb2000,
PollByte_kb1250(1
2, PollByte_kb3000,
250 kBytes),
PollByte_kb3000~1 PollByte_infinity
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2, PollByte_kb25,
PollByte_kb125(12
PollByte_kb100~3, PollByte_kb50,
5 kBytes),
PollByte_kb125~4, PollByte_kb75,
PollByte_kb250(25
PollByte_kb250~5, PollByte_kb100,
0 kBytes),
PollByte_kb375~6, PollByte_kb125,
PollByte_kb375(37
PollByte_kb500~7, PollByte_kb250,
5 kBytes),
PollByte_kb750~8, PollByte_kb375,
PollByte_kb500(50 PollByte_kb25(25
PollByte_kb1000~9, byte PollByte_kb500,
0 kBytes), kBytes)
PollByte_kb1250~1 PollByte_kb750,
PollByte_kb750(75
0, PollByte_kb1000,
0 kBytes),
PollByte_kb1500~1 PollByte_kb1250,
PollByte_kb1000(1
1, PollByte_kb1500,
000 kBytes),
PollByte_kb2000~1 PollByte_kb2000,
PollByte_kb1250(1
2, PollByte_kb3000,
250 kBytes),
PollByte_kb3000~1 PollByte_infinity
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0, PollPdu_p4,
PDUs), PollPdu_p8~1, PollPdu_p8,
PollPdu_p32(32 PollPdu_p16~2, PollPdu_p16,
PDUs), PollPdu_p32~3, PollPdu_p32, PollPdu_p32(32
None
PollPdu_p64(64 PollPdu_p64~4, PollPdu_p64, PDUs)
PDUs), PollPdu_p128~5, PollPdu_p128,
PollPdu_p128(128 PollPdu_p256~6, PollPdu_p256,
PDUs), PollPdu_Infinity~7 PollPdu_Infinity
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0, PollPdu_p4,
PDUs), PollPdu_p8~1, PollPdu_p8,
PollPdu_p32(32 PollPdu_p16~2, PollPdu_p16,
PDUs), PollPdu_p32~3, PollPdu_p32, PollPdu_p32(32
None
PollPdu_p64(64 PollPdu_p64~4, PollPdu_p64, PDUs)
PDUs), PollPdu_p128~5, PollPdu_p128,
PollPdu_p128(128 PollPdu_p256~6, PollPdu_p256,
PDUs), PollPdu_Infinity~7 PollPdu_Infinity
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
5), 8, Tpollretrans_m50,
Tpollretrans_m100( Tpollretrans_m100~ Tpollretrans_m55,
100), 19, Tpollretrans_m60,
Tpollretrans_m105( Tpollretrans_m105~ Tpollretrans_m65,
105), 20, Tpollretrans_m70,
Tpollretrans_m110( Tpollretrans_m110~ Tpollretrans_m75,
110), 21, Tpollretrans_m80,
Tpollretrans_m115( Tpollretrans_m115~ Tpollretrans_m85,
115), 22, Tpollretrans_m90,
Tpollretrans_m120( Tpollretrans_m120~ Tpollretrans_m95,
120), 23, Tpollretrans_m100,
Tpollretrans_m125( Tpollretrans_m125~ Tpollretrans_m105,
125), 24, Tpollretrans_m110,
Tpollretrans_m130( Tpollretrans_m130~ Tpollretrans_m115,
130), 25, Tpollretrans_m120,
Tpollretrans_m135( Tpollretrans_m135~ Tpollretrans_m125,
135), 26, Tpollretrans_m130,
Tpollretrans_m140( Tpollretrans_m140~ Tpollretrans_m135,
Tpollretrans_m40(4
140), 27, ms Tpollretrans_m140,
0)
Tpollretrans_m145( Tpollretrans_m145~ Tpollretrans_m145,
145), 28, Tpollretrans_m150,
Tpollretrans_m150( Tpollretrans_m150~ Tpollretrans_m155,
150), 29, Tpollretrans_m160,
Tpollretrans_m155( Tpollretrans_m155~ Tpollretrans_m165,
155), 30, Tpollretrans_m170,
Tpollretrans_m160( Tpollretrans_m160~ Tpollretrans_m175,
160), 31, Tpollretrans_m180,
Tpollretrans_m165( Tpollretrans_m165~ Tpollretrans_m185,
165), 32, Tpollretrans_m190,
Tpollretrans_m170( Tpollretrans_m170~ Tpollretrans_m195,
170), 33, Tpollretrans_m200,
Tpollretrans_m175( Tpollretrans_m175~ Tpollretrans_m205,
175), 34, Tpollretrans_m210,
Tpollretrans_m180( Tpollretrans_m180~ Tpollretrans_m215,
180), 35, Tpollretrans_m220,
Tpollretrans_m185( Tpollretrans_m185~ Tpollretrans_m225,
185), 36, Tpollretrans_m230,
5), 8, Tpollretrans_m50,
Tpollretrans_m100( Tpollretrans_m100~ Tpollretrans_m55,
100), 19, Tpollretrans_m60,
Tpollretrans_m105( Tpollretrans_m105~ Tpollretrans_m65,
105), 20, Tpollretrans_m70,
Tpollretrans_m110( Tpollretrans_m110~ Tpollretrans_m75,
110), 21, Tpollretrans_m80,
Tpollretrans_m115( Tpollretrans_m115~ Tpollretrans_m85,
115), 22, Tpollretrans_m90,
Tpollretrans_m120( Tpollretrans_m120~ Tpollretrans_m95,
120), 23, Tpollretrans_m100,
Tpollretrans_m125( Tpollretrans_m125~ Tpollretrans_m105,
125), 24, Tpollretrans_m110,
Tpollretrans_m130( Tpollretrans_m130~ Tpollretrans_m115,
130), 25, Tpollretrans_m120,
Tpollretrans_m135( Tpollretrans_m135~ Tpollretrans_m125,
135), 26, Tpollretrans_m130,
Tpollretrans_m140( Tpollretrans_m140~ Tpollretrans_m135,
Tpollretrans_m50(5
140), 27, ms Tpollretrans_m140,
0)
Tpollretrans_m145( Tpollretrans_m145~ Tpollretrans_m145,
145), 28, Tpollretrans_m150,
Tpollretrans_m150( Tpollretrans_m150~ Tpollretrans_m155,
150), 29, Tpollretrans_m160,
Tpollretrans_m155( Tpollretrans_m155~ Tpollretrans_m165,
155), 30, Tpollretrans_m170,
Tpollretrans_m160( Tpollretrans_m160~ Tpollretrans_m175,
160), 31, Tpollretrans_m180,
Tpollretrans_m165( Tpollretrans_m165~ Tpollretrans_m185,
165), 32, Tpollretrans_m190,
Tpollretrans_m170( Tpollretrans_m170~ Tpollretrans_m195,
170), 33, Tpollretrans_m200,
Tpollretrans_m175( Tpollretrans_m175~ Tpollretrans_m205,
175), 34, Tpollretrans_m210,
Tpollretrans_m180( Tpollretrans_m180~ Tpollretrans_m215,
180), 35, Tpollretrans_m220,
Tpollretrans_m185( Tpollretrans_m185~ Tpollretrans_m225,
185), 36, Tpollretrans_m230,
Tstatprohibit_m95(9 Tstatprohibit_m95~ Tstatprohibit_m45,
5), 19, Tstatprohibit_m50,
Tstatprohibit_m100( Tstatprohibit_m100 Tstatprohibit_m55,
100), ~20, Tstatprohibit_m60,
Tstatprohibit_m105( Tstatprohibit_m105 Tstatprohibit_m65,
105), ~21, Tstatprohibit_m70,
Tstatprohibit_m110( Tstatprohibit_m110~ Tstatprohibit_m75,
110), 22, Tstatprohibit_m80,
Tstatprohibit_m115( Tstatprohibit_m115~ Tstatprohibit_m85,
115), 23, Tstatprohibit_m90,
Tstatprohibit_m120( Tstatprohibit_m120 Tstatprohibit_m95,
120), ~24, Tstatprohibit_m100,
Tstatprohibit_m125( Tstatprohibit_m125 Tstatprohibit_m105,
125), ~25, Tstatprohibit_m110,
Tstatprohibit_m130( Tstatprohibit_m130 Tstatprohibit_m115,
130), ~26, Tstatprohibit_m120,
Tstatprohibit_m135( Tstatprohibit_m135 Tstatprohibit_m125,
135), ~27, Tstatprohibit_m130,
Tstatprohibit_m140( Tstatprohibit_m140 Tstatprohibit_m135, Tstatprohibit_m50(5
ms
140), ~28, Tstatprohibit_m140, 0)
Tstatprohibit_m145( Tstatprohibit_m145 Tstatprohibit_m145,
145), ~29, Tstatprohibit_m150,
Tstatprohibit_m150( Tstatprohibit_m150 Tstatprohibit_m155,
150), ~30, Tstatprohibit_m160,
Tstatprohibit_m155( Tstatprohibit_m155 Tstatprohibit_m165,
155), ~31, Tstatprohibit_m170,
Tstatprohibit_m160( Tstatprohibit_m160 Tstatprohibit_m175,
160), ~32, Tstatprohibit_m180,
Tstatprohibit_m165( Tstatprohibit_m165 Tstatprohibit_m185,
165), ~33, Tstatprohibit_m190,
Tstatprohibit_m170( Tstatprohibit_m170 Tstatprohibit_m195,
170), ~34, Tstatprohibit_m200,
Tstatprohibit_m175( Tstatprohibit_m175 Tstatprohibit_m205,
175), ~35, Tstatprohibit_m210,
Tstatprohibit_m180( Tstatprohibit_m180 Tstatprohibit_m215,
180), ~36, Tstatprohibit_m220,
Tstatprohibit_m185( Tstatprohibit_m185 Tstatprohibit_m225,
185), ~37, Tstatprohibit_m230,
Tstatprohibit_m95(9 Tstatprohibit_m95~ Tstatprohibit_m45,
5), 19, Tstatprohibit_m50,
Tstatprohibit_m100( Tstatprohibit_m100 Tstatprohibit_m55,
100), ~20, Tstatprohibit_m60,
Tstatprohibit_m105( Tstatprohibit_m105 Tstatprohibit_m65,
105), ~21, Tstatprohibit_m70,
Tstatprohibit_m110( Tstatprohibit_m110~ Tstatprohibit_m75,
110), 22, Tstatprohibit_m80,
Tstatprohibit_m115( Tstatprohibit_m115~ Tstatprohibit_m85,
115), 23, Tstatprohibit_m90,
Tstatprohibit_m120( Tstatprohibit_m120 Tstatprohibit_m95,
120), ~24, Tstatprohibit_m100,
Tstatprohibit_m125( Tstatprohibit_m125 Tstatprohibit_m105,
125), ~25, Tstatprohibit_m110,
Tstatprohibit_m130( Tstatprohibit_m130 Tstatprohibit_m115,
130), ~26, Tstatprohibit_m120,
Tstatprohibit_m135( Tstatprohibit_m135 Tstatprohibit_m125,
135), ~27, Tstatprohibit_m130,
Tstatprohibit_m140( Tstatprohibit_m140 Tstatprohibit_m135, Tstatprohibit_m40(4
ms
140), ~28, Tstatprohibit_m140, 0)
Tstatprohibit_m145( Tstatprohibit_m145 Tstatprohibit_m145,
145), ~29, Tstatprohibit_m150,
Tstatprohibit_m150( Tstatprohibit_m150 Tstatprohibit_m155,
150), ~30, Tstatprohibit_m160,
Tstatprohibit_m155( Tstatprohibit_m155 Tstatprohibit_m165,
155), ~31, Tstatprohibit_m170,
Tstatprohibit_m160( Tstatprohibit_m160 Tstatprohibit_m175,
160), ~32, Tstatprohibit_m180,
Tstatprohibit_m165( Tstatprohibit_m165 Tstatprohibit_m185,
165), ~33, Tstatprohibit_m190,
Tstatprohibit_m170( Tstatprohibit_m170 Tstatprohibit_m195,
170), ~34, Tstatprohibit_m200,
Tstatprohibit_m175( Tstatprohibit_m175 Tstatprohibit_m205,
175), ~35, Tstatprohibit_m210,
Tstatprohibit_m180( Tstatprohibit_m180 Tstatprohibit_m215,
180), ~36, Tstatprohibit_m220,
Tstatprohibit_m185( Tstatprohibit_m185 Tstatprohibit_m225,
185), ~37, Tstatprohibit_m230,
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m50(5
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 0)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m40(4
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 0)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~

PdcpSnsize_7bits(7 PdcpSnsize_7bits~
), 0, PdcpSnsize_7bits, PdcpSnsize_12bits(
bit
PdcpSnsize_12bits( PdcpSnsize_12bits PdcpSnsize_12bits 12)
12) ~1
RlcSnSize_size5(5)
RlcSnSize_size5~0,
, RlcSnSize_size5, RlcSnSize_size10(1
RlcSnSize_size10~ bit
RlcSnSize_size10(1 RlcSnSize_size10 0)
1
0)

RlcSnSize_size5(5)
RlcSnSize_size5~0,
, RlcSnSize_size5, RlcSnSize_size10(1
RlcSnSize_size10~ bit
RlcSnSize_size10(1 RlcSnSize_size10 0)
1
0)
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m50(5
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 0)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m40(4
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 0)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~

FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE TRUE(TRUE)
TRUE(TRUE)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
 m45~8, m50~9,
m55~10, m60~11,
m65~12, m70~13,
m75~14, m80~15,
m85~16, m90~17,
m5(), m10(), m15(), m95~18, m100~19,
m20(), m25(), m105~20,
m30(), m35(), m110~21,
m40(), m45(), m115~22,
m50(), m55(), m120~23, m5, m10, m15,
m60(), m65(), m125~24, m20, m25, m30,
m70(), m75(), m130~25, m35, m40, m45,
m80(), m85(), m135~26, m50, m55, m60,
m90(), m95(), m140~27, m65, m70, m75,
m100(), m105(), m145~28, m80, m85, m90,
m110(), m115(), m150~29, m95, m100, m105,
m120(), m125(), m155~30, m110, m115, m120,
m130(), m135(), m160~31, m125, m130, m135,
m140(), m145(), m165~32, ms m140, m145, m150, m200
m150(), m155(), m170~33, m155, m160, m165,
m160(), m165(), m175~34, m170, m175, m180,
m170(), m175(), m180~35, m185, m190, m195,
m180(), m185(), m185~36, m200, m205, m210,
m190(), m195(), m190~37, m215, m220, m225,
m200(), m205(), m195~38, m230, m235, m240,
m210(), m215(), m200~39, m245, m250, m300,
m220(), m225(), m205~40, m350, m400, m450,
m230(), m235(), m210~41, m500
m240(), m245(), m215~42,
m250(), m300(), m220~43,
m350(), m400(), m225~44,
m450(), m500() m230~45,
m235~46,
m240~47,
m245~48,
m250~49,
m300~50,
 m40~8, m45~9,
m50~10, m55~11,
m60~12, m65~13,
m70~14, m75~15,
m80~16, m85~17,
m90~18, m95~19,
m100~20,
m105~21,
m110~22,
m115~23,
m0, m5, m10, m15, m0, m5, m10, m15,
m120~24,
m20, m25, m30, m20, m25, m30,
m125~25,
m35, m40, m45, m35, m40, m45,
m130~26,
m50, m55, m60, m50, m55, m60,
m135~27,
m65, m70, m75, m65, m70, m75,
m140~28,
m80, m85, m90, m80, m85, m90,
m145~29,
m95, m100, m105, m95, m100, m105,
m150~30,
m110, m115, m120, m110, m115, m120,
m155~31,
m125, m130, m135, m125, m130, m135,
m160~32,
m140, m145, m150, ms m140, m145, m150, m200
m165~33,
m155, m160, m165, m155, m160, m165,
m170~34,
m170, m175, m180, m170, m175, m180,
m175~35,
m185, m190, m195, m185, m190, m195,
m180~36,
m200, m205, m210, m200, m205, m210,
m185~37,
m215, m220, m225, m215, m220, m225,
m190~38,
m230, m235, m240, m230, m235, m240,
m195~39,
m245, m250, m300, m245, m250, m300,
m200~40,
m350, m400, m450, m350, m400, m450,
m205~41,
m500 m500
m210~42,
m215~43,
m220~44,
m225~45,
m230~46,
m235~47,
m240~48,
m245~49,
m250~50,
m300~51,
 m45~8, m50~9,
m55~10, m60~11,
m65~12, m70~13,
m75~14, m80~15,
m85~16, m90~17,
m5(), m10(), m15(), m95~18, m100~19,
m20(), m25(), m105~20,
m30(), m35(), m110~21,
m40(), m45(), m115~22,
m50(), m55(), m120~23, m5, m10, m15,
m60(), m65(), m125~24, m20, m25, m30,
m70(), m75(), m130~25, m35, m40, m45,
m80(), m85(), m135~26, m50, m55, m60,
m90(), m95(), m140~27, m65, m70, m75,
m100(), m105(), m145~28, m80, m85, m90,
m110(), m115(), m150~29, m95, m100, m105,
m120(), m125(), m155~30, m110, m115, m120,
m130(), m135(), m160~31, m125, m130, m135,
m140(), m145(), m165~32, ms m140, m145, m150, m200
m150(), m155(), m170~33, m155, m160, m165,
m160(), m165(), m175~34, m170, m175, m180,
m170(), m175(), m180~35, m185, m190, m195,
m180(), m185(), m185~36, m200, m205, m210,
m190(), m195(), m190~37, m215, m220, m225,
m200(), m205(), m195~38, m230, m235, m240,
m210(), m215(), m200~39, m245, m250, m300,
m220(), m225(), m205~40, m350, m400, m450,
m230(), m235(), m210~41, m500
m240(), m245(), m215~42,
m250(), m300(), m220~43,
m350(), m400(), m225~44,
m450(), m500() m230~45,
m235~46,
m240~47,
m245~48,
m250~49,
m300~50,
 m40~8, m45~9,
m50~10, m55~11,
m60~12, m65~13,
m70~14, m75~15,
m80~16, m85~17,
m90~18, m95~19,
m100~20,
m105~21,
m110~22,
m115~23,
m0, m5, m10, m15, m0, m5, m10, m15,
m120~24,
m20, m25, m30, m20, m25, m30,
m125~25,
m35, m40, m45, m35, m40, m45,
m130~26,
m50, m55, m60, m50, m55, m60,
m135~27,
m65, m70, m75, m65, m70, m75,
m140~28,
m80, m85, m90, m80, m85, m90,
m145~29,
m95, m100, m105, m95, m100, m105,
m150~30,
m110, m115, m120, m110, m115, m120,
m155~31,
m125, m130, m135, m125, m130, m135,
m160~32,
m140, m145, m150, ms m140, m145, m150, m200
m165~33,
m155, m160, m165, m155, m160, m165,
m170~34,
m170, m175, m180, m170, m175, m180,
m175~35,
m185, m190, m195, m185, m190, m195,
m180~36,
m200, m205, m210, m200, m205, m210,
m185~37,
m215, m220, m225, m215, m220, m225,
m190~38,
m230, m235, m240, m230, m235, m240,
m195~39,
m245, m250, m300, m245, m250, m300,
m200~40,
m350, m400, m450, m350, m400, m450,
m205~41,
m500 m500
m210~42,
m215~43,
m220~44,
m225~45,
m230~46,
m235~47,
m240~48,
m245~49,
m250~50,
m300~51,

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
DiscardTimer_50(5 DiscardTimer_50~0
0), ,
DiscardTimer_100( DiscardTimer_100~
100), 1, DiscardTimer_50,
DiscardTimer_150( DiscardTimer_150~ DiscardTimer_100,
150), 2, DiscardTimer_150,
DiscardTimer_300( DiscardTimer_300~ DiscardTimer_300,
300), 3, DiscardTimer_500, DiscardTimer_Infinit
ms
DiscardTimer_500( DiscardTimer_500~ DiscardTimer_750, y(infinity)
500), 4, DiscardTimer_1500
DiscardTimer_750( DiscardTimer_750~ ,
750), 5, DiscardTimer_Infinit
DiscardTimer_1500 DiscardTimer_1500 y
(1500), ~6,
DiscardTimer_Infinit DiscardTimer_Infinit
y(infinity) y~7

SRB1(SRB1),
SRB1~1, SRB2~2 None SRB1, SRB2 None
SRB2(SRB2)

Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold

_t1(1), _t1~0, _t1,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1, _t2,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2, _t3,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t4(4), _t4~3, _t4, Maxretx_Threshold
None
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold _t32(32)
_t6(6), _t6~4, _t6,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5, _t8,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6, _t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7 _t32
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t1(1), _t1~0, _t1,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t2(2), _t2~1, _t2,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t3(3), _t3~2, _t3,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t4(4), _t4~3, _t4, Maxretx_Threshold
None
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold _t32(32)
_t6(6), _t6~4, _t6,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t8(8), _t8~5, _t8,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t16(16), _t16~6, _t16,
Maxretx_Threshold Maxretx_Threshold Maxretx_Threshold
_t32(32) _t32~7 _t32

PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2, PollByte_kb25,
PollByte_kb125(12
PollByte_kb100~3, PollByte_kb50,
5 kBytes),
PollByte_kb125~4, PollByte_kb75,
PollByte_kb250(25
PollByte_kb250~5, PollByte_kb100,
0 kBytes),
PollByte_kb375~6, PollByte_kb125,
PollByte_kb375(37
PollByte_kb500~7, PollByte_kb250,
5 kBytes),
PollByte_kb750~8, PollByte_kb375,
PollByte_kb500(50 PollByte_infinity(infi
PollByte_kb1000~9, byte PollByte_kb500,
0 kBytes), nite kBytes)
PollByte_kb1250~1 PollByte_kb750,
PollByte_kb750(75
0, PollByte_kb1000,
0 kBytes),
PollByte_kb1500~1 PollByte_kb1250,
PollByte_kb1000(1
1, PollByte_kb1500,
000 kBytes),
PollByte_kb2000~1 PollByte_kb2000,
PollByte_kb1250(1
2, PollByte_kb3000,
250 kBytes),
PollByte_kb3000~1 PollByte_infinity
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
PollByte_kb25(25
kBytes),
PollByte_kb50(50
kBytes),
PollByte_kb75(75
kBytes),
PollByte_kb25~0,
PollByte_kb100(10
PollByte_kb50~1,
0 kBytes),
PollByte_kb75~2, PollByte_kb25,
PollByte_kb125(12
PollByte_kb100~3, PollByte_kb50,
5 kBytes),
PollByte_kb125~4, PollByte_kb75,
PollByte_kb250(25
PollByte_kb250~5, PollByte_kb100,
0 kBytes),
PollByte_kb375~6, PollByte_kb125,
PollByte_kb375(37
PollByte_kb500~7, PollByte_kb250,
5 kBytes),
PollByte_kb750~8, PollByte_kb375,
PollByte_kb500(50 PollByte_infinity(infi
PollByte_kb1000~9, byte PollByte_kb500,
0 kBytes), nite kBytes)
PollByte_kb1250~1 PollByte_kb750,
PollByte_kb750(75
0, PollByte_kb1000,
0 kBytes),
PollByte_kb1500~1 PollByte_kb1250,
PollByte_kb1000(1
1, PollByte_kb1500,
000 kBytes),
PollByte_kb2000~1 PollByte_kb2000,
PollByte_kb1250(1
2, PollByte_kb3000,
250 kBytes),
PollByte_kb3000~1 PollByte_infinity
PollByte_kb1500(1
3,
500 kBytes),
PollByte_infinity~14
PollByte_kb2000(2
000 kBytes),
PollByte_kb3000(3
000 kBytes),
PollByte_infinity(infi
nite kBytes)
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0, PollPdu_p4,
PDUs), PollPdu_p8~1, PollPdu_p8,
PollPdu_p32(32 PollPdu_p16~2, PollPdu_p16,
PDUs), PollPdu_p32~3, PollPdu_p32, PollPdu_Infinity(infi
None
PollPdu_p64(64 PollPdu_p64~4, PollPdu_p64, nite PDUs)
PDUs), PollPdu_p128~5, PollPdu_p128,
PollPdu_p128(128 PollPdu_p256~6, PollPdu_p256,
PDUs), PollPdu_Infinity~7 PollPdu_Infinity
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
PollPdu_p4(4
PDUs),
PollPdu_p8(8
PDUs),
PollPdu_p16(16 PollPdu_p4~0, PollPdu_p4,
PDUs), PollPdu_p8~1, PollPdu_p8,
PollPdu_p32(32 PollPdu_p16~2, PollPdu_p16,
PDUs), PollPdu_p32~3, PollPdu_p32, PollPdu_Infinity(infi
None
PollPdu_p64(64 PollPdu_p64~4, PollPdu_p64, nite PDUs)
PDUs), PollPdu_p128~5, PollPdu_p128,
PollPdu_p128(128 PollPdu_p256~6, PollPdu_p256,
PDUs), PollPdu_Infinity~7 PollPdu_Infinity
PollPdu_p256(256
PDUs),
PollPdu_Infinity(infi
nite PDUs)
5), 8, Tpollretrans_m50,
Tpollretrans_m100( Tpollretrans_m100~ Tpollretrans_m55,
100), 19, Tpollretrans_m60,
Tpollretrans_m105( Tpollretrans_m105~ Tpollretrans_m65,
105), 20, Tpollretrans_m70,
Tpollretrans_m110( Tpollretrans_m110~ Tpollretrans_m75,
110), 21, Tpollretrans_m80,
Tpollretrans_m115( Tpollretrans_m115~ Tpollretrans_m85,
115), 22, Tpollretrans_m90,
Tpollretrans_m120( Tpollretrans_m120~ Tpollretrans_m95,
120), 23, Tpollretrans_m100,
Tpollretrans_m125( Tpollretrans_m125~ Tpollretrans_m105,
125), 24, Tpollretrans_m110,
Tpollretrans_m130( Tpollretrans_m130~ Tpollretrans_m115,
130), 25, Tpollretrans_m120,
Tpollretrans_m135( Tpollretrans_m135~ Tpollretrans_m125,
135), 26, Tpollretrans_m130,
Tpollretrans_m140( Tpollretrans_m140~ Tpollretrans_m135,
Tpollretrans_m45(4
140), 27, ms Tpollretrans_m140,
5)
Tpollretrans_m145( Tpollretrans_m145~ Tpollretrans_m145,
145), 28, Tpollretrans_m150,
Tpollretrans_m150( Tpollretrans_m150~ Tpollretrans_m155,
150), 29, Tpollretrans_m160,
Tpollretrans_m155( Tpollretrans_m155~ Tpollretrans_m165,
155), 30, Tpollretrans_m170,
Tpollretrans_m160( Tpollretrans_m160~ Tpollretrans_m175,
160), 31, Tpollretrans_m180,
Tpollretrans_m165( Tpollretrans_m165~ Tpollretrans_m185,
165), 32, Tpollretrans_m190,
Tpollretrans_m170( Tpollretrans_m170~ Tpollretrans_m195,
170), 33, Tpollretrans_m200,
Tpollretrans_m175( Tpollretrans_m175~ Tpollretrans_m205,
175), 34, Tpollretrans_m210,
Tpollretrans_m180( Tpollretrans_m180~ Tpollretrans_m215,
180), 35, Tpollretrans_m220,
Tpollretrans_m185( Tpollretrans_m185~ Tpollretrans_m225,
185), 36, Tpollretrans_m230,
5), 8, Tpollretrans_m50,
Tpollretrans_m100( Tpollretrans_m100~ Tpollretrans_m55,
100), 19, Tpollretrans_m60,
Tpollretrans_m105( Tpollretrans_m105~ Tpollretrans_m65,
105), 20, Tpollretrans_m70,
Tpollretrans_m110( Tpollretrans_m110~ Tpollretrans_m75,
110), 21, Tpollretrans_m80,
Tpollretrans_m115( Tpollretrans_m115~ Tpollretrans_m85,
115), 22, Tpollretrans_m90,
Tpollretrans_m120( Tpollretrans_m120~ Tpollretrans_m95,
120), 23, Tpollretrans_m100,
Tpollretrans_m125( Tpollretrans_m125~ Tpollretrans_m105,
125), 24, Tpollretrans_m110,
Tpollretrans_m130( Tpollretrans_m130~ Tpollretrans_m115,
130), 25, Tpollretrans_m120,
Tpollretrans_m135( Tpollretrans_m135~ Tpollretrans_m125,
135), 26, Tpollretrans_m130,
Tpollretrans_m140( Tpollretrans_m140~ Tpollretrans_m135,
Tpollretrans_m45(4
140), 27, ms Tpollretrans_m140,
5)
Tpollretrans_m145( Tpollretrans_m145~ Tpollretrans_m145,
145), 28, Tpollretrans_m150,
Tpollretrans_m150( Tpollretrans_m150~ Tpollretrans_m155,
150), 29, Tpollretrans_m160,
Tpollretrans_m155( Tpollretrans_m155~ Tpollretrans_m165,
155), 30, Tpollretrans_m170,
Tpollretrans_m160( Tpollretrans_m160~ Tpollretrans_m175,
160), 31, Tpollretrans_m180,
Tpollretrans_m165( Tpollretrans_m165~ Tpollretrans_m185,
165), 32, Tpollretrans_m190,
Tpollretrans_m170( Tpollretrans_m170~ Tpollretrans_m195,
170), 33, Tpollretrans_m200,
Tpollretrans_m175( Tpollretrans_m175~ Tpollretrans_m205,
175), 34, Tpollretrans_m210,
Tpollretrans_m180( Tpollretrans_m180~ Tpollretrans_m215,
180), 35, Tpollretrans_m220,
Tpollretrans_m185( Tpollretrans_m185~ Tpollretrans_m225,
185), 36, Tpollretrans_m230,
Tstatprohibit_m95(9 Tstatprohibit_m95~ Tstatprohibit_m45,
5), 19, Tstatprohibit_m50,
Tstatprohibit_m100( Tstatprohibit_m100 Tstatprohibit_m55,
100), ~20, Tstatprohibit_m60,
Tstatprohibit_m105( Tstatprohibit_m105 Tstatprohibit_m65,
105), ~21, Tstatprohibit_m70,
Tstatprohibit_m110( Tstatprohibit_m110~ Tstatprohibit_m75,
110), 22, Tstatprohibit_m80,
Tstatprohibit_m115( Tstatprohibit_m115~ Tstatprohibit_m85,
115), 23, Tstatprohibit_m90,
Tstatprohibit_m120( Tstatprohibit_m120 Tstatprohibit_m95,
120), ~24, Tstatprohibit_m100,
Tstatprohibit_m125( Tstatprohibit_m125 Tstatprohibit_m105,
125), ~25, Tstatprohibit_m110,
Tstatprohibit_m130( Tstatprohibit_m130 Tstatprohibit_m115,
130), ~26, Tstatprohibit_m120,
Tstatprohibit_m135( Tstatprohibit_m135 Tstatprohibit_m125,
135), ~27, Tstatprohibit_m130,
Tstatprohibit_m140( Tstatprohibit_m140 Tstatprohibit_m135,
ms Tstatprohibit_m0(0)
140), ~28, Tstatprohibit_m140,
Tstatprohibit_m145( Tstatprohibit_m145 Tstatprohibit_m145,
145), ~29, Tstatprohibit_m150,
Tstatprohibit_m150( Tstatprohibit_m150 Tstatprohibit_m155,
150), ~30, Tstatprohibit_m160,
Tstatprohibit_m155( Tstatprohibit_m155 Tstatprohibit_m165,
155), ~31, Tstatprohibit_m170,
Tstatprohibit_m160( Tstatprohibit_m160 Tstatprohibit_m175,
160), ~32, Tstatprohibit_m180,
Tstatprohibit_m165( Tstatprohibit_m165 Tstatprohibit_m185,
165), ~33, Tstatprohibit_m190,
Tstatprohibit_m170( Tstatprohibit_m170 Tstatprohibit_m195,
170), ~34, Tstatprohibit_m200,
Tstatprohibit_m175( Tstatprohibit_m175 Tstatprohibit_m205,
175), ~35, Tstatprohibit_m210,
Tstatprohibit_m180( Tstatprohibit_m180 Tstatprohibit_m215,
180), ~36, Tstatprohibit_m220,
Tstatprohibit_m185( Tstatprohibit_m185 Tstatprohibit_m225,
185), ~37, Tstatprohibit_m230,
Tstatprohibit_m95(9 Tstatprohibit_m95~ Tstatprohibit_m45,
5), 19, Tstatprohibit_m50,
Tstatprohibit_m100( Tstatprohibit_m100 Tstatprohibit_m55,
100), ~20, Tstatprohibit_m60,
Tstatprohibit_m105( Tstatprohibit_m105 Tstatprohibit_m65,
105), ~21, Tstatprohibit_m70,
Tstatprohibit_m110( Tstatprohibit_m110~ Tstatprohibit_m75,
110), 22, Tstatprohibit_m80,
Tstatprohibit_m115( Tstatprohibit_m115~ Tstatprohibit_m85,
115), 23, Tstatprohibit_m90,
Tstatprohibit_m120( Tstatprohibit_m120 Tstatprohibit_m95,
120), ~24, Tstatprohibit_m100,
Tstatprohibit_m125( Tstatprohibit_m125 Tstatprohibit_m105,
125), ~25, Tstatprohibit_m110,
Tstatprohibit_m130( Tstatprohibit_m130 Tstatprohibit_m115,
130), ~26, Tstatprohibit_m120,
Tstatprohibit_m135( Tstatprohibit_m135 Tstatprohibit_m125,
135), ~27, Tstatprohibit_m130,
Tstatprohibit_m140( Tstatprohibit_m140 Tstatprohibit_m135,
ms Tstatprohibit_m0(0)
140), ~28, Tstatprohibit_m140,
Tstatprohibit_m145( Tstatprohibit_m145 Tstatprohibit_m145,
145), ~29, Tstatprohibit_m150,
Tstatprohibit_m150( Tstatprohibit_m150 Tstatprohibit_m155,
150), ~30, Tstatprohibit_m160,
Tstatprohibit_m155( Tstatprohibit_m155 Tstatprohibit_m165,
155), ~31, Tstatprohibit_m170,
Tstatprohibit_m160( Tstatprohibit_m160 Tstatprohibit_m175,
160), ~32, Tstatprohibit_m180,
Tstatprohibit_m165( Tstatprohibit_m165 Tstatprohibit_m185,
165), ~33, Tstatprohibit_m190,
Tstatprohibit_m170( Tstatprohibit_m170 Tstatprohibit_m195,
170), ~34, Tstatprohibit_m200,
Tstatprohibit_m175( Tstatprohibit_m175 Tstatprohibit_m205,
175), ~35, Tstatprohibit_m210,
Tstatprohibit_m180( Tstatprohibit_m180 Tstatprohibit_m215,
180), ~36, Tstatprohibit_m220,
Tstatprohibit_m185( Tstatprohibit_m185 Tstatprohibit_m225,
185), ~37, Tstatprohibit_m230,
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m35(3
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 5)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
0), ,
Treordering_m35(3 Treordering_m35~7
5), ,
Treordering_m40(4 Treordering_m40~8
Treordering_m0,
0), ,
Treordering_m5,
Treordering_m45(4 Treordering_m45~9
Treordering_m10,
5), ,
Treordering_m15,
Treordering_m50(5 Treordering_m50~1
Treordering_m20,
0), 0,
Treordering_m25,
Treordering_m55(5 Treordering_m55~1
Treordering_m30,
5), 1,
Treordering_m35,
Treordering_m60(6 Treordering_m60~1
Treordering_m40,
0), 2,
Treordering_m45,
Treordering_m65(6 Treordering_m65~1
Treordering_m50,
5), 3,
Treordering_m55,
Treordering_m70(7 Treordering_m70~1
Treordering_m60,
0), 4,
Treordering_m65,
Treordering_m75(7 Treordering_m75~1
Treordering_m70,
5), 5, Treordering_m35(3
ms Treordering_m75,
Treordering_m80(8 Treordering_m80~1 5)
Treordering_m80,
0), 6,
Treordering_m85,
Treordering_m85(8 Treordering_m85~1
Treordering_m90,
5), 7,
Treordering_m95,
Treordering_m90(9 Treordering_m90~1
Treordering_m100,
0), 8,
Treordering_m110,
Treordering_m95(9 Treordering_m95~1
Treordering_m120,
5), 9,
Treordering_m130,
Treordering_m100( Treordering_m100~
Treordering_m140,
100), 20,
Treordering_m150,
Treordering_m110(1 Treordering_m110~
Treordering_m160,
10), 21,
Treordering_m170,
Treordering_m120( Treordering_m120~
Treordering_m180,
120), 22,
Treordering_m190,
Treordering_m130( Treordering_m130~
Treordering_m200
130), 23,
Treordering_m140( Treordering_m140~
140), 24,
Treordering_m150( Treordering_m150~
QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4, QCI1, QCI2, QCI3,
QCI5(QCI 5), QCI5~5, QCI6~6, None QCI4, QCI5, QCI6, None
QCI6(QCI 6), QCI7~7, QCI8~8, QCI7, QCI8, QCI9
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)
1~1000 N/A None 0.001~1, step:0.001 700

1~1000 N/A None 0.001~1, step:0.001 700

MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
MinGbrRate_0_KB,
1kB/s), ~8000,
MinGbrRate_1_KB,
MinGbrRate_2_KB( MinGbrRate_2_KB
MinGbrRate_2_KB,
2kB/s), ~16000,
MinGbrRate_4_KB,
MinGbrRate_4_KB( MinGbrRate_4_KB
MinGbrRate_8_KB,
4kB/s), ~32000,
MinGbrRate_16_K
MinGbrRate_8_KB( MinGbrRate_8_KB
B,
8kB/s), ~64000,
MinGbrRate_32_K
MinGbrRate_16_K MinGbrRate_16_K MinGbrRate_1_KB(
kB/s B,
B(16kB/s), B~128000, 1kB/s)
MinGbrRate_64_K
MinGbrRate_32_K MinGbrRate_32_K
B,
B(32kB/s), B~256000,
MinGbrRate_128_K
MinGbrRate_64_K MinGbrRate_64_K
B,
B(64kB/s), B~512000,
MinGbrRate_256_K
MinGbrRate_128_K MinGbrRate_128_K
B,
B(128kB/s), B~1024000,
MinGbrRate_512_K
MinGbrRate_256_K MinGbrRate_256_K
B
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000
MinGbrRate_0_KB( MinGbrRate_0_KB
0kB/s), ~0,
MinGbrRate_1_KB( MinGbrRate_1_KB
MinGbrRate_0_KB,
1kB/s), ~8000,
MinGbrRate_1_KB,
MinGbrRate_2_KB( MinGbrRate_2_KB
MinGbrRate_2_KB,
2kB/s), ~16000,
MinGbrRate_4_KB,
MinGbrRate_4_KB( MinGbrRate_4_KB
MinGbrRate_8_KB,
4kB/s), ~32000,
MinGbrRate_16_K
MinGbrRate_8_KB( MinGbrRate_8_KB
B,
8kB/s), ~64000,
MinGbrRate_32_K
MinGbrRate_16_K MinGbrRate_16_K MinGbrRate_1_KB(
kB/s B,
B(16kB/s), B~128000, 1kB/s)
MinGbrRate_64_K
MinGbrRate_32_K MinGbrRate_32_K
B,
B(32kB/s), B~256000,
MinGbrRate_128_K
MinGbrRate_64_K MinGbrRate_64_K
B,
B(64kB/s), B~512000,
MinGbrRate_256_K
MinGbrRate_128_K MinGbrRate_128_K
B,
B(128kB/s), B~1024000,
MinGbrRate_512_K
MinGbrRate_256_K MinGbrRate_256_K
B
B(256kB/s), B~2048000,
MinGbrRate_512_K MinGbrRate_512_K
B(512kB/s) B~4096000

0~10 N/A None 0~1, step:0.1 10

0~39 N/A None 0~39 0

0~39 N/A None 0~39 0

PBR_0_KBps(0kB/
s),
PBR_8_KBps(8kB/
s),
PBR_16_KBps(16k PBR_0_KBps~0, PBR_0_KBps,
B/s), PBR_8_KBps~1, PBR_8_KBps,
PBR_32_KBps(32k PBR_16_KBps~2, PBR_16_KBps,
B/s), PBR_32_KBps~3, PBR_32_KBps, PBR_8_KBps(8kB/
kB/s
PBR_64_KBps(64k PBR_64_KBps~4, PBR_64_KBps, s)
B/s), PBR_128_KBps~5, PBR_128_KBps,
PBR_128_KBps(12 PBR_256_KBps~6, PBR_256_KBps,
8kB/s), PBR_INFINITY~7 PBR_INFINITY
PBR_256_KBps(25
6kB/s),
PBR_INFINITY(Infi
nity)

4~16 N/A None 4~16 11

FLOW_CTRL(Flow
FLOW_CTRL~0,
Control), FLOW_CTRL, FLOW_CTRL(Flow
NON_FLOW_CTRL None
NON_FLOW_CTRL NON_FLOW_CTRL Control)
~1
(Non Flow Control)

1~9 N/A None 1~9 None

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

NO_ADAPTIVE(NO
_ADAPTIVE),
NO_ADAPTIVE~0, NO_ADAPTIVE,
TxD_BF_ADAPTIV
TxD_BF_ADAPTIV TxD_BF_ADAPTIV MIMO_BF_ADAPTI
E(TxD_BF_ADAPTI
E~1, None E, VE(MIMO_BF_ADA
VE),
MIMO_BF_ADAPTI MIMO_BF_ADAPTI PTIVE)
MIMO_BF_ADAPTI
VE~2 VE
VE(MIMO_BF_ADA
PTIVE)
TM2(TM2),
TM3(TM3),
TM7(TM7), TM2~0, TM3~1,
TM2, TM3, TM7,
TM8(TM8), TM7~2, TM8~3,
TM8, TM4,
TM4(TM4), TM4~4, None TM3(TM3)
TM9w/oPMI,
TM9w/oPMI(TM9w/ TM9w/oPMI~5,
TM9wPMI
oPMI), TM9wPMI~6
TM9wPMI(TM9wP
MI)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

ms2(2ms),
ms2~2, ms5~5,
ms5(5ms),
ms10~10,
ms10(10ms), ms2, ms5, ms10,
ms20~20,
ms20(20ms), ms ms20, ms40, ms80, ms40(40ms)
ms40~40,
ms40(40ms), ms160
ms80~80,
ms80(80ms),
ms160~160
ms160(160ms)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

NO_ADAPTIVE(NO
_ADAPTIVE),
OL_ADAPTIVE(OL NO_ADAPTIVE~0, NO_ADAPTIVE,
_ADAPTIVE), OL_ADAPTIVE~1, OL_ADAPTIVE, OL_ADAPTIVE(OL
None
CL_ADAPTIVE(CL_ CL_ADAPTIVE~2, CL_ADAPTIVE, _ADAPTIVE)
ADAPTIVE), OC_ADAPTIVE~3 OC_ADAPTIVE
OC_ADAPTIVE(OC
_ADAPTIVE)
TM2(TM2),
TM3(TM3), TM2~0, TM3~1, TM2, TM3, TM4,
None TM3(TM3)
TM4(TM4), TM4~2, TM6~3 TM6
TM6(TM6)
TM2(TM2),
TM2~0, ADAPTIVE(ADAPTI
ADAPTIVE(ADAPTI None TM2, ADAPTIVE
ADAPTIVE~1 VE)
VE)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

ms5(5ms),
ms10(10ms),
ms5~1, ms10~2,
ms20(20ms), ms5, ms10, ms20,
ms20~3, ms40~4,
ms40(40ms), ms ms40, ms80, ms40(40ms)
ms80~5, ms160~6,
ms80(80ms), ms160, ms320
ms320~7
ms160(160ms),
ms320(320ms)

0~99999999 N/A None 0~99999999 None

NOT_CFG(NOT_C NOT_CFG~0, NOT_CFG(NOT_C

None NOT_CFG, CFG
FG), CFG(CFG) CFG~1 FG)

0~99 N/A None 0~99 99

LteAnrSwitchOff(Lte
AnrSwitchOff),
UtranAnrSwitchOff(
UtranAnrSwitchOff),
GeranAnrSwitchOff(
LteAnrSwitchOff:Off
GeranAnrSwitchOff) LteAnrSwitchOff~0,
,
, UtranAnrSwitchOff~
UtranAnrSwitchOff:
CdmaAnrSwitchOff( 1,
LteAnrSwitchOff, Off,
CdmaAnrSwitchOff) GeranAnrSwitchOff
UtranAnrSwitchOff, GeranAnrSwitchOff:
, ~2,
GeranAnrSwitchOff, Off,
DynamicDrxSwitch CdmaAnrSwitchOff
CdmaAnrSwitchOff, CdmaAnrSwitchOff:
Off(DynamicDrxSwi ~3,
DynamicDrxSwitch Off,
tchOff), DynamicDrxSwitch
Off, CaSwitchOff, DynamicDrxSwitch
CaSwitchOff(CaSwi Off~4,
TtiBundlingSwitchO Off:Off,
tchOff), CaSwitchOff~5, None
ff, CaSwitchOff:Off,
TtiBundlingSwitchO TtiBundlingSwitchO
MimoTmModeSet, TtiBundlingSwitchO
ff(TtiBundlingSwitch ff~6,
AperiodicCqiRptSwi ff:Off,
Off), MimoTmModeSet~
tchOff, MimoTmModeSet:O
MimoTmModeSet( 7,
RohcSwitchOff, ff,
MimoTmModeSet), AperiodicCqiRptSwi
Tdd2CCDlCaEnhan AperiodicCqiRptSwi
AperiodicCqiRptSwi tchOff~8,
ceSwitchOff tchOff:Off,
tchOff(AperiodicCqi RohcSwitchOff~9,
RohcSwitchOff:Off,
RptSwitchOff), Tdd2CCDlCaEnhan
Tdd2CCDlCaEnhan
RohcSwitchOff(Roh ceSwitchOff~10
ceSwitchOff:Off
cSwitchOff),
Tdd2CCDlCaEnhan
ceSwitchOff(Tdd2C
CDlCaEnhanceSwit
chOff)

0~80 characters N/A None 0~80 None

QCI1(QCI 1),
QCI2(QCI 2),
QCI3(QCI 3), QCI1~1, QCI2~2,
QCI4(QCI 4), QCI3~3, QCI4~4, QCI1, QCI2, QCI3,
QCI5(QCI 5), QCI5~5, QCI6~6, None QCI4, QCI5, QCI6, None
QCI6(QCI 6), QCI7~7, QCI8~8, QCI7, QCI8, QCI9
QCI7(QCI 7), QCI9~9
QCI8(QCI 8),
QCI9(QCI 9)
TPeriodBSRTimer_
sf5(5 subframes),
TPeriodBSRTimer_
sf10(10 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf5~0, sf5,
sf16(16 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf10~1, sf10,
sf20(20 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf16~2, sf16,
sf32(32 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf20~3, sf20,
sf40(40 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf32~4, sf32,
sf64(64 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf40~5, sf40,
sf80(80 subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf64~6, sf64,
sf128(128
TPeriodBSRTimer_ TPeriodBSRTimer_ TPeriodBSRTimer_
subframes), subframe
sf80~7, sf80, sf10(10 subframes)
TPeriodBSRTimer_
TPeriodBSRTimer_ TPeriodBSRTimer_
sf160(160
sf128~8, sf128,
subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf160~9, sf160,
sf320(320
TPeriodBSRTimer_ TPeriodBSRTimer_
subframes),
sf320~10, sf320,
TPeriodBSRTimer_
TPeriodBSRTimer_ TPeriodBSRTimer_
sf640(640
sf640~11, sf640,
subframes),
TPeriodBSRTimer_ TPeriodBSRTimer_
TPeriodBSRTimer_
sf1280~12, sf1280,
sf1280(1280
TPeriodBSRTimer_ TPeriodBSRTimer_
subframes),
sf2560~13, sf2560,
TPeriodBSRTimer_
TPeriodBSRTimer_i TPeriodBSRTimer_i
sf2560(2560
nfinity~14 nfinity
subframes),
TPeriodBSRTimer_i
nfinity(infinity
subframes)
sf320(sf320),
sf320~0, sf640~1,
sf640(sf640),
sf1280~2, sf320, sf640,
sf1280(sf1280),
sf2560~3, subframe sf1280, sf2560, sf320(sf320)
sf2560(sf2560),
sf5120~4, sf5120, sf10240
sf5120(sf5120),
sf10240~5
sf10240(sf10240)
GAP_PATTERN_T GAP_PATTERN_T GAP_PATTERN_T
YPE_1, YPE_1~1, YPE_1, GAP_PATTERN_T
None
GAP_PATTERN_T GAP_PATTERN_T GAP_PATTERN_T YPE_1
YPE_2 YPE_2~2 YPE_2

FC0~0, FC1~1,
FC2~2, FC3~3,
FC0, FC1, FC2, FC4~4, FC5~5, FC0, FC1, FC2,
FC3, FC4, FC5, FC6~6, FC7~7, FC3, FC4, FC5,
FC6, FC7, FC8, FC8~8, FC9~9, None FC6, FC7, FC8, FC6
FC9, FC11, FC13, FC11~10, FC9, FC11, FC13,
FC15, FC17, FC19 FC13~11, FC15, FC17, FC19
FC15~12,
FC17~13, FC19~14

FC0~0, FC1~1,
FC2~2, FC3~3,
FC0, FC1, FC2, FC4~4, FC5~5, FC0, FC1, FC2,
FC3, FC4, FC5, FC6~6, FC7~7, FC3, FC4, FC5,
FC6, FC7, FC8, FC8~8, FC9~9, None FC6, FC7, FC8, FC6
FC9, FC11, FC13, FC11~10, FC9, FC11, FC13,
FC15, FC17, FC19 FC13~11, FC15, FC17, FC19
FC15~12,
FC17~13, FC19~14
 FC0~0, FC1~1,
FC2~2, FC3~3,
FC0, FC1, FC2, FC4~4, FC5~5, FC0, FC1, FC2,
FC3, FC4, FC5, FC6~6, FC7~7, FC3, FC4, FC5,
FC6, FC7, FC8, FC8~8, FC9~9, None FC6, FC7, FC8, FC6
FC9, FC11, FC13, FC11~10, FC9, FC11, FC13,
FC15, FC17, FC19 FC13~11, FC15, FC17, FC19
FC15~12,
FC17~13, FC19~14

NOT_CFG~0,
NOT_CFG, CFG None NOT_CFG, CFG NOT_CFG
CFG~1
-140~-43 N/A dBm -140~-43 -44
 NOT_CFG~0,
NOT_CFG, CFG None NOT_CFG, CFG NOT_CFG
CFG~1
T_CRMAX_30S(30
s),
T_CRMAX_30S~0,
T_CRMAX_60S(60
T_CRMAX_60S~1, T_CRMAX_30S,
s),
T_CRMAX_120S~2 T_CRMAX_60S,
T_CRMAX_120S(1 T_CRMAX_60S(60
, s T_CRMAX_120S,
20s), s)
T_CRMAX_180S~3 T_CRMAX_180S,
T_CRMAX_180S(1
, T_CRMAX_240S
80s),
T_CRMAX_240S~4
T_CRMAX_240S(2
40s)
T_CRMAXHYST_3 T_CRMAXHYST_3 T_CRMAXHYST_3
0S(30s), 0S~0, 0S,
T_CRMAXHYST_6 T_CRMAXHYST_6 T_CRMAXHYST_6
0S(60s), 0S~1, 0S,
T_CRMAXHYST_1 T_CRMAXHYST_1 T_CRMAXHYST_1 T_CRMAXHYST_6
s
20S(120s), 20S~2, 20S, 0S(60s)
T_CRMAXHYST_1 T_CRMAXHYST_1 T_CRMAXHYST_1
80S(180s), 80S~3, 80S,
T_CRMAXHYST_2 T_CRMAXHYST_2 T_CRMAXHYST_2
40S(240s) 40S~4 40S
1~16 N/A None 1~16 4
1~16 N/A None 1~16 8
TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
0DOT25(0.25), 0DOT25~0, 0DOT25,
TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
0DOT50(0.5), 0DOT50~1, 0DOT50, TTT_SF_MEDIUM_
None
TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ LDOT0(1)
0DOT75(0.75), 0DOT75~2, 0DOT75,
TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ TTT_SF_MEDIUM_
LDOT0(1) LDOT0~3 LDOT0
TTT_SF_HIGH_0D TTT_SF_HIGH_0D TTT_SF_HIGH_0D
OT25(0.25), OT25~0, OT25,
TTT_SF_HIGH_0D TTT_SF_HIGH_0D TTT_SF_HIGH_0D
OT50(0.5), OT50~1, OT50, TTT_SF_HIGH_0D
None
TTT_SF_HIGH_0D TTT_SF_HIGH_0D TTT_SF_HIGH_0D OT75(0.75)
OT75(0.75), OT75~2, OT75,
TTT_SF_HIGH_LD TTT_SF_HIGH_LD TTT_SF_HIGH_LD
OT0(1) OT0~3 OT0

FC0~0, FC1~1,
FC2~2, FC3~3,
FC0, FC1, FC2, FC4~4, FC5~5, FC0, FC1, FC2,
FC3, FC4, FC5, FC6~6, FC7~7, FC3, FC4, FC5,
FC6, FC7, FC8, FC8~8, FC9~9, None FC6, FC7, FC8, FC6
FC9, FC11, FC13, FC11~10, FC9, FC11, FC13,
FC15, FC17, FC19 FC13~11, FC15, FC17, FC19
FC15~12,
FC17~13, FC19~14

FC0~0, FC1~1,
FC2~2, FC3~3,
FC0, FC1, FC2, FC4~4, FC5~5, FC0, FC1, FC2,
FC3, FC4, FC5, FC6~6, FC7~7, FC3, FC4, FC5,
FC6, FC7, FC8, FC8~8, FC9~9, None FC6, FC7, FC8, FC6
FC9, FC11, FC13, FC11~10, FC9, FC11, FC13,
FC15, FC17, FC19 FC13~11, FC15, FC17, FC19
FC15~12,
FC17~13, FC19~14
0~20 N/A 30s 0~600 0

1~8 N/A None 1~8 4

r1(1), r2(2), r4(4),
r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None Infinity(Infinity)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 480ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
RSCP, ECN0, RSCP~0, ECN0~1, RSCP, ECN0,
None ECN0
BOTH BOTH~2 BOTH

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 480ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12

PILOT_STRENGTH
PILOT_STRENGTH PILOT_STRENGTH
~0,
, ,
PILOT_PN_PHASE None PILOT_STRENGTH
PILOT_PN_PHASE PILOT_PN_PHASE
_AND_STRENGTH
_AND_STRENGTH _AND_STRENGTH
~1
 120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 480ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12

PILOT_STRENGTH
PILOT_STRENGTH None PILOT_STRENGTH PILOT_STRENGTH
~0

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 480ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
RSRP, RSRQ, RSRP~0, RSRQ~1, RSRP, RSRQ,
None RSRP
BOTH BOTH~2 BOTH

EventB1(EventB1), EventB1~0,
None EventB1, EventB2 EventB1(EventB1)
EventB2(EventB2) EventB2~1

1~65535 N/A ms 1~65535 1000

1~6 N/A None 1~6 1

BY_PRIORITY, BY_PRIORITY~0, BY_PRIORITY,

BY_SELECT_RATI BY_SELECT_RATI None BY_SELECT_RATI BY_PRIORITY
O O~1 O
BY_PRIORITY, BY_PRIORITY~0, BY_PRIORITY,
BY_SELECT_RATI BY_SELECT_RATI None BY_SELECT_RATI BY_PRIORITY
O O~1 O

NONE, NONE~0, NONE,

None NONE
REDIRECTION REDIRECTION~1 REDIRECTION

PERIOD~0,
PERIOD, EVENT None PERIOD, EVENT EVENT
EVENT~1

FIXED, FIXED~0, FIXED,

BY_MEAS_RESUL BY_MEAS_RESUL None BY_MEAS_RESUL FIXED
T T~1 T

1~16 N/A None 1~16 8

1~32 N/A None 1~32 8

0~32 N/A None 0~32 0

0~16 N/A None 0~16 0

BY_RATIO(BY_RA
TIO), BY_RATIO~0, BY_RATIO, BY_MEAS_RESUL
BY_MEAS_RESUL BY_MEAS_RESUL None BY_MEAS_RESUL T(BY_MEAS_RES
T(BY_MEAS_RES T~1 T ULT)
ULT)

OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

1~8 N/A None 1~8 4

r1(1), r2(2), r4(4),

r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None Infinity(Infinity)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)
RSRP, RSRQ RSRP~0, RSRQ~1 None RSRP, RSRQ RSRP

SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ SAME_AS_TRIG_
QUAN(Same as None QUAN(Same as
QUAN~0, BOTH~1 QUAN, BOTH
Trig Quan), BOTH Trig Quan)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 240ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ SAME_AS_TRIG_
QUAN(Same as None QUAN(Same as
QUAN~0, BOTH~1 QUAN, BOTH
Trig Quan), BOTH Trig Quan)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 240ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
RSRP, RSRQ, RSRP~0, RSRQ~1, RSRP, RSRQ,
None RSRP
BOTH BOTH~2 BOTH

RSRP, RSRQ, RSRP~0, RSRQ~1, RSRP, RSRQ,

None RSRP
BOTH BOTH~2 BOTH

RSRP, RSRQ, RSRP~0, RSRQ~1, RSRP, RSRQ,

None RSRP
BOTH BOTH~2 BOTH
0~5000 N/A ms 0~5000 40

RSRP, RSRQ, RSRP~0, RSRQ~1, RSRP, RSRQ,

None RSRP
BOTH BOTH~2 BOTH

0~255 N/A None 0~255 None

 0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 40ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 40ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
ms 40ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15

-120~-25 N/A dBm -120~-25 -106

-48~0 N/A 0.5dB -24~0 -24

-110~-48 N/A dBm -110~-48 -103

-63~0 N/A 0.5dB -31.5~0 -34

-140~-43 N/A dBm -140~-43 -80

1~10 N/A s 1~10 4

0~255 N/A None 0~255 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%), P00, P05, P10,
P20~4, P25~5,
P40(40%), P15, P20, P25,
P30~6, P40~7,
P50(50%), % P30, P40, P50, P95(95%)
P50~8, P60~9,
P60(60%), P60, P70, P75,
P70~10, P75~11,
P70(70%), P80, P85, P90, P95
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0, G_TIME_S4,
G_TIME_S8(8s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1, G_TIME_S8,
G_TIME_S16(16s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2, G_TIME_S16,
G_TIME_S32(32s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S32~3, G_TIME_S32, ACCESS_BARRIN
G_TIME_S64(64s), s
ACCESS_BARRIN ACCESS_BARRIN G_TIME_S4(4s)
ACCESS_BARRIN
G_TIME_S64~4, G_TIME_S64,
G_TIME_S128(128
ACCESS_BARRIN ACCESS_BARRIN
s),
G_TIME_S128~5, G_TIME_S128,
ACCESS_BARRIN
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6, G_TIME_S256,
s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7 G_TIME_S512
G_TIME_S512(512
s)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%), P00, P05, P10,
P20~4, P25~5,
P40(40%), P15, P20, P25,
P30~6, P40~7,
P50(50%), % P30, P40, P50, P95(95%)
P50~8, P60~9,
P60(60%), P60, P70, P75,
P70~10, P75~11,
P70(70%), P80, P85, P90, P95
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)
ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0, G_TIME_S4,
G_TIME_S8(8s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1, G_TIME_S8,
G_TIME_S16(16s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2, G_TIME_S16,
G_TIME_S32(32s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S32~3, G_TIME_S32, ACCESS_BARRIN
G_TIME_S64(64s), s
ACCESS_BARRIN ACCESS_BARRIN G_TIME_S4(4s)
ACCESS_BARRIN
G_TIME_S64~4, G_TIME_S64,
G_TIME_S128(128
ACCESS_BARRIN ACCESS_BARRIN
s),
G_TIME_S128~5, G_TIME_S128,
ACCESS_BARRIN
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6, G_TIME_S256,
s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7 G_TIME_S512
G_TIME_S512(512
s)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%), P00, P05, P10,
P20~4, P25~5,
P40(40%), P15, P20, P25,
P30~6, P40~7,
P50(50%), % P30, P40, P50, P95(95%)
P50~8, P60~9,
P60(60%), P60, P70, P75,
P70~10, P75~11,
P70(70%), P80, P85, P90, P95
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0, G_TIME_S4,
G_TIME_S8(8s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1, G_TIME_S8,
G_TIME_S16(16s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2, G_TIME_S16,
G_TIME_S32(32s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S32~3, G_TIME_S32, ACCESS_BARRIN
G_TIME_S64(64s), s
ACCESS_BARRIN ACCESS_BARRIN G_TIME_S4(4s)
ACCESS_BARRIN
G_TIME_S64~4, G_TIME_S64,
G_TIME_S128(128
ACCESS_BARRIN ACCESS_BARRIN
s),
G_TIME_S128~5, G_TIME_S128,
ACCESS_BARRIN
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6, G_TIME_S256,
s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7 G_TIME_S512
G_TIME_S512(512
s)
AC11BARSTATE(A AC11BARSTATE:P
AC11BARSTATE~0
C11BARSTATE), ermit,
,
AC12BARSTATE(A AC12BARSTATE:P
AC12BARSTATE~1 AC11BARSTATE,
C12BARSTATE), ermit,
, AC12BARSTATE,
AC13BARSTATE(A AC13BARSTATE:P
AC13BARSTATE~2 None AC13BARSTATE,
C13BARSTATE), ermit,
, AC14BARSTATE,
AC14BARSTATE(A AC14BARSTATE:P
AC14BARSTATE~3 AC15BARSTATE
C14BARSTATE), ermit,
,
AC15BARSTATE(A AC15BARSTATE:P
AC15BARSTATE~4
C15BARSTATE) ermit

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%), P00, P05, P10,
P20~4, P25~5,
P40(40%), P15, P20, P25,
P30~6, P40~7,
P50(50%), % P30, P40, P50, P95(95%)
P50~8, P60~9,
P60(60%), P60, P70, P75,
P70~10, P75~11,
P70(70%), P80, P85, P90, P95
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0, G_TIME_S4,
G_TIME_S8(8s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1, G_TIME_S8,
G_TIME_S16(16s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2, G_TIME_S16,
G_TIME_S32(32s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S32~3, G_TIME_S32, ACCESS_BARRIN
G_TIME_S64(64s), s
ACCESS_BARRIN ACCESS_BARRIN G_TIME_S4(4s)
ACCESS_BARRIN
G_TIME_S64~4, G_TIME_S64,
G_TIME_S128(128
ACCESS_BARRIN ACCESS_BARRIN
s),
G_TIME_S128~5, G_TIME_S128,
ACCESS_BARRIN
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6, G_TIME_S256,
s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7 G_TIME_S512
G_TIME_S512(512
s)
AC11BARSTATE(A AC11BARSTATE:P
AC11BARSTATE~0
C11BARSTATE), ermit,
,
AC12BARSTATE(A AC12BARSTATE:P
AC12BARSTATE~1 AC11BARSTATE,
C12BARSTATE), ermit,
, AC12BARSTATE,
AC13BARSTATE(A AC13BARSTATE:P
AC13BARSTATE~2 None AC13BARSTATE,
C13BARSTATE), ermit,
, AC14BARSTATE,
AC14BARSTATE(A AC14BARSTATE:P
AC14BARSTATE~3 AC15BARSTATE
C14BARSTATE), ermit,
,
AC15BARSTATE(A AC15BARSTATE:P
AC15BARSTATE~4
C15BARSTATE) ermit

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
P00(0%), P05(5%),
P10(10%),
P15(15%),
P20(20%),
P00~0, P05~1,
P25(25%),
P10~2, P15~3,
P30(30%), P00, P05, P10,
P20~4, P25~5,
P40(40%), P15, P20, P25,
P30~6, P40~7,
P50(50%), % P30, P40, P50, P95(95%)
P50~8, P60~9,
P60(60%), P60, P70, P75,
P70~10, P75~11,
P70(70%), P80, P85, P90, P95
P80~12, P85~13,
P75(75%),
P90~14, P95~15
P80(80%),
P85(85%),
P90(90%),
P95(95%)

ACCESS_BARRIN
G_TIME_S4(4s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S4~0, G_TIME_S4,
G_TIME_S8(8s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S8~1, G_TIME_S8,
G_TIME_S16(16s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S16~2, G_TIME_S16,
G_TIME_S32(32s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S32~3, G_TIME_S32, ACCESS_BARRIN
G_TIME_S64(64s), s
ACCESS_BARRIN ACCESS_BARRIN G_TIME_S4(4s)
ACCESS_BARRIN
G_TIME_S64~4, G_TIME_S64,
G_TIME_S128(128
ACCESS_BARRIN ACCESS_BARRIN
s),
G_TIME_S128~5, G_TIME_S128,
ACCESS_BARRIN
ACCESS_BARRIN ACCESS_BARRIN
G_TIME_S256(256
G_TIME_S256~6, G_TIME_S256,
s),
ACCESS_BARRIN ACCESS_BARRIN
ACCESS_BARRIN
G_TIME_S512~7 G_TIME_S512
G_TIME_S512(512
s)
AC11BARSTATE(A AC11BARSTATE:P
AC11BARSTATE~0
C11BARSTATE), ermit,
,
AC12BARSTATE(A AC12BARSTATE:P
AC12BARSTATE~1 AC11BARSTATE,
C12BARSTATE), ermit,
, AC12BARSTATE,
AC13BARSTATE(A AC13BARSTATE:P
AC13BARSTATE~2 None AC13BARSTATE,
C13BARSTATE), ermit,
, AC14BARSTATE,
AC14BARSTATE(A AC14BARSTATE:P
AC14BARSTATE~3 AC15BARSTATE
C14BARSTATE), ermit,
,
AC15BARSTATE(A AC15BARSTATE:P
AC15BARSTATE~4
C15BARSTATE) ermit

0~255 N/A None 0~255 None

CELL_BARRED(Ba
CELL_BARRED~0, CELL_BARRED,
rred), CELL_NOT_BARR
CELL_NOT_BARR None CELL_NOT_BARR
CELL_NOT_BARR ED(Not Barred)
ED~1 ED
ED(Not Barred)

ALLOWED, ALLOWED~0, ALLOWED,

None ALLOWED
NOT_ALLOWED NOT_ALLOWED~1 NOT_ALLOWED

NORMAL_MODE(N
ormal mode), NORMAL_MODE~ NORMAL_MODE, NORMAL_MODE(N
None
RR_MODE(Round 0, RR_MODE~1 RR_MODE ormal mode)
Robin Mode)

1~720 N/A h 1~720 1

2000-01- 2000-01-
01T00:00:00+00:00 01T00:00:00+00:00 2000-01-
N/A None
~2099-12- ~2099-12- 01T00:00:00+00:00
31T23:59:59+00:00 31T23:59:59+00:00

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

1~1000 N/A ms 1~1000 100

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

CELL_RESERVED
_FOR_OP(Reserve CELL_RESERVED CELL_RESERVED
CELL_NOT_RESE
d), _FOR_OP~0, _FOR_OP,
None RVED_FOR_OP(N
CELL_NOT_RESE CELL_NOT_RESE CELL_NOT_RESE
ot Reserved)
RVED_FOR_OP(N RVED_FOR_OP~1 RVED_FOR_OP
ot Reserved)

1~100 N/A % 1~100 16

1~100 N/A % 1~100 16

CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_

NUM_0(0), NUM_0~0, NUM_0,
CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_
NUM_1(1), NUM_1~1, NUM_1,
CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_
None
NUM_2(2), NUM_2~2, NUM_2, NUM_0(0)
CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_
NUM_3(3), NUM_3~3, NUM_3,
CELL_MME_CFG_ CELL_MME_CFG_ CELL_MME_CFG_
NUM_4(4) NUM_4~4 NUM_4

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

1~100 N/A % 1~100 16

0~5 N/A None 0~5 None

0~255 N/A None 0~255 None

DB0_Q_HYST(0dB)
,
DB1_Q_HYST(1dB)
,
DB2_Q_HYST(2dB)
,
DB0_Q_HYST~0,
DB3_Q_HYST(3dB)
DB1_Q_HYST~1,
,
DB2_Q_HYST~2,
DB4_Q_HYST(4dB) DB0_Q_HYST,
DB3_Q_HYST~3,
, DB1_Q_HYST,
DB4_Q_HYST~4,
DB5_Q_HYST(5dB) DB2_Q_HYST,
DB5_Q_HYST~5,
, DB3_Q_HYST,
DB6_Q_HYST~6,
DB6_Q_HYST(6dB) DB4_Q_HYST,
DB8_Q_HYST~7,
, DB5_Q_HYST,
DB10_Q_HYST~8,
DB8_Q_HYST(8dB) DB6_Q_HYST,
DB12_Q_HYST~9,
, DB8_Q_HYST,
DB14_Q_HYST~10 dB DB4_Q_HYST(4dB)
DB10_Q_HYST(10 DB10_Q_HYST,
,
dB), DB12_Q_HYST,
DB16_Q_HYST~11
DB12_Q_HYST(12 DB14_Q_HYST,
,
dB), DB16_Q_HYST,
DB18_Q_HYST~12
DB14_Q_HYST(14 DB18_Q_HYST,
,
dB), DB20_Q_HYST,
DB20_Q_HYST~13
DB16_Q_HYST(16 DB22_Q_HYST,
,
dB), DB24_Q_HYST
DB22_Q_HYST~14
DB18_Q_HYST(18
,
dB),
DB24_Q_HYST~15
DB20_Q_HYST(20
dB),
DB22_Q_HYST(22
dB),
DB24_Q_HYST(24
dB)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

S30_T_EVALULATI S30_T_EVALULATI S30_T_EVALULATI

ON(30s), ON~0, ON,
S60_T_EVALULATI S60_T_EVALULATI S60_T_EVALULATI
ON(60s), ON~1, ON,
S120_T_EVALULA S120_T_EVALULA S120_T_EVALULA S60_T_EVALULATI
s
TION(120s), TION~2, TION, ON(60s)
S180_T_EVALULA S180_T_EVALULA S180_T_EVALULA
TION(180s), TION~3, TION,
S240_T_EVALULA S240_T_EVALULA S240_T_EVALULA
TION(240s) TION~4 TION
S30_T_HYST_NOR S30_T_HYST_NOR S30_T_HYST_NOR
MAL(30s), MAL~0, MAL,
S60_T_HYST_NOR S60_T_HYST_NOR S60_T_HYST_NOR
MAL(60s), MAL~1, MAL,
S120_T_HYST_NO S120_T_HYST_NO S120_T_HYST_NO S30_T_HYST_NOR
s
RMAL(120s), RMAL~2, RMAL, MAL(30s)
S180_T_HYST_NO S180_T_HYST_NO S180_T_HYST_NO
RMAL(180s), RMAL~3, RMAL,
S240_T_HYST_NO S240_T_HYST_NO S240_T_HYST_NO
RMAL(240s) RMAL~4 RMAL

1~16 N/A None 1~16 4

1~16 N/A None 1~16 8

DB_6_Q_HYST_SF DB_6_Q_HYST_SF DB_6_Q_HYST_SF

_MEDIUM(-6dB), _MEDIUM~0, _MEDIUM,
DB_4_Q_HYST_SF DB_4_Q_HYST_SF DB_4_Q_HYST_SF
_MEDIUM(-4dB), _MEDIUM~1, _MEDIUM, DB0_Q_HYST_SF_
dB
DB_2_Q_HYST_SF DB_2_Q_HYST_SF DB_2_Q_HYST_SF MEDIUM(0dB)
_MEDIUM(-2dB), _MEDIUM~2, _MEDIUM,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
MEDIUM(0dB) MEDIUM~3 MEDIUM

DB_6_Q_HYST_SF DB_6_Q_HYST_SF DB_6_Q_HYST_SF

_HIGH(-6dB), _HIGH~0, _HIGH,
DB_4_Q_HYST_SF DB_4_Q_HYST_SF DB_4_Q_HYST_SF
_HIGH(-4dB), _HIGH~1, _HIGH, DB0_Q_HYST_SF_
dB
DB_2_Q_HYST_SF DB_2_Q_HYST_SF DB_2_Q_HYST_SF HIGH(0dB)
_HIGH(-2dB), _HIGH~2, _HIGH,
DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ DB0_Q_HYST_SF_
HIGH(0dB) HIGH~3 HIGH
NOT_CFG(Not
NOT_CFG~0,
configure), None NOT_CFG, CFG CFG(Configure)
CFG~1
CFG(Configure)

0~31 N/A 2dB 0~62 9

0~31 N/A 2dB 0~62 7

0~7 N/A None 0~7 7

-70~-22 N/A 2dBm -140~-44 -64

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

-30~33 N/A dBm -30~33 23

NOT_CFG(Not
NOT_CFG~0,
configure), None NOT_CFG, CFG CFG(Configure)
CFG~1
CFG(Configure)
0~31 N/A 2dB 0~62 29

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

MBW6(1.4M), MBW6~0,
MBW15(3M), MBW15~1,
MBW6, MBW15,
MBW25(5M), MBW25~2,
MHz MBW25, MBW50, MBW6(1.4M)
MBW50(10M), MBW50~3,
MBW75, MBW100
MBW75(15M), MBW75~4,
MBW100(20M) MBW100~5

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0,
configure), None NOT_CFG, CFG CFG(Configure)
CFG~1
CFG(Configure)
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_1DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T0(1.0)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO

T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_0DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T75(0.75)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

BitString00(00), BitString00~0, BitString00,

BitString01(01), BitString01~1, BitString01,
None BitString01(01)
BitString10(10), BitString10~2, BitString10,
BitString11(11) BitString11~3 BitString11

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~31 N/A dB 0~31 5

0~31 N/A dB 0~31 4

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~31 N/A dB 0~31 0

NOT_CFG(Not
NOT_CFG~0,
configure), None NOT_CFG, CFG CFG(Configure)
CFG~1
CFG(Configure)

-34~-3 N/A dB -34~-3 -18

0~255 N/A None 0~255 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~15 N/A None 0~15 8

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO

T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_0DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T75(0.75)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_1DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T0(1.0)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_1DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T0(1.0)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO

T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_0DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T75(0.75)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~255 N/A None 0~255 None

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_1DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T0(1.0)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO

T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_0DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T75(0.75)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

0~255 N/A None 0~255 None

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_1DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T0(1.0)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO

T25(0.25), T25~0, T25,
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO
T5(0.5), T5~1, T5, T_RESEL_SF_0DO
None
T_RESEL_SF_0DO T_RESEL_SF_0DO T_RESEL_SF_0DO T75(0.75)
T75(0.75), T75~2, T75,
T_RESEL_SF_1DO T_RESEL_SF_1DO T_RESEL_SF_1DO
T0(1.0) T0~3 T0

0~255 N/A None 0~255 None

-70~-22 N/A 2dBm -140~-44 -64

0~8 N/A 2dB 0~16 0

-34~-3 N/A dB -34~-3 -18

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
1~8 N/A dB 1~8 1

0~255 N/A None 0~255 None

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF16(16 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF16(16 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF64(64 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF64(64 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF64(64 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF16(16 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

1~300 N/A s 1~300 6

MERGE~0,
MERGE, DISCARD None MERGE, DISCARD DISCARD
DISCARD~1

MERGE~0,
MERGE, DISCARD None MERGE, DISCARD DISCARD
DISCARD~1
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

27~1000 N/A None 0.027~1, step:0.001 27

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)
RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF32(32 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

RF8(8 radio
frames), RF16(16
radio frames),
RF32(32 radio
RF8~0, RF16~1,
frames), RF64(64 RF8, RF16, RF32,
RF32~2, RF64~3, RF64(64 radio
radio frames), None RF64, RF128,
RF128~4, frames)
RF128(128 radio RF256, RF512
RF256~5, RF512~6
frames), RF256(256
radio frames),
RF512(512 radio
frames)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

AL0(0), AL04(0.4),
AL05(0.5), AL0~0, AL04~1,
AL0, AL04, AL05,
AL06(0.6), AL05~2, AL06~3,
None AL06, AL07, AL08, AL07(0.7)
AL07(0.7), AL07~4, AL08~5,
AL09, AL1
AL08(0.8), AL09~6, AL1~7
AL09(0.9), AL1(1)

-127~-96 N/A dBm -127~-96 -115

-126~24 N/A dBm -126~24 -67

DELTAF_2(-2dB), DELTAF_2~0, DELTAF_2,

DELTAF0(0dB), DELTAF0~1, dB DELTAF0, DELTAF0(0dB)
DELTAF2(2dB) DELTAF2~2 DELTAF2

DELTAF1(1dB), DELTAF1~0, DELTAF1,

DELTAF3(3dB), DELTAF3~1, dB DELTAF3, DELTAF3(3dB)
DELTAF5(5dB) DELTAF5~2 DELTAF5
DELTAF_2(-2dB), DELTAF_2~0, DELTAF_2,
DELTAF0(0dB), DELTAF0~1, DELTAF0,
dB DELTAF1(1dB)
DELTAF1(1dB), DELTAF1~2, DELTAF1,
DELTAF2(2dB) DELTAF2~3 DELTAF2

DELTAF_2(-2dB), DELTAF_2~0, DELTAF_2,

DELTAF0(0dB), DELTAF0~1, dB DELTAF0, DELTAF2(2dB)
DELTAF2(2dB) DELTAF2~2 DELTAF2

DELTAF_2(-2dB), DELTAF_2~0, DELTAF_2,

DELTAF0(0dB), DELTAF0~1, dB DELTAF0, DELTAF2(2dB)
DELTAF2(2dB) DELTAF2~2 DELTAF2
-1~6 N/A 2dB -2~12 4

DELTAMsg2_NEG6
(-6dB),
DELTAMsg2_NEG4
DELTAMsg2_NEG6
(-4dB), DELTAMsg2_NEG6
~0,
DELTAMsg2_NEG2 ,
DELTAMsg2_NEG4
(-2dB), DELTAMsg2_NEG4
~1,
DELTAMsg2_0(0dB ,
DELTAMsg2_NEG2
), DELTAMsg2_NEG2 DELTAMsg2_6(6dB
~2, dB
DELTAMsg2_2(2dB , DELTAMsg2_0, )
DELTAMsg2_0~3,
), DELTAMsg2_2,
DELTAMsg2_2~4,
DELTAMsg2_4(4dB DELTAMsg2_4,
DELTAMsg2_4~5,
), DELTAMsg2_6,
DELTAMsg2_6~6,
DELTAMsg2_6(6dB DELTAMsg2_8
DELTAMsg2_8~7
),
DELTAMsg2_8(8dB
)

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 None

0~23 N/A None 0~23 None

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

-600~500,32767 N/A 0.1dBm -60~50,3276.7 32767

0~23,255 N/A None 0~23,255 255

0~62 N/A None 0~62 None

60~254 N/A None 60~254 None

0~8 N/A None 0~8 None

0~2147483647 N/A 0.1dBm 0~214748364.7 None

0~8 N/A None 0~8 None

0~60 N/A 0.1dB 0~6 0

NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression), NO_COMPRESSIO
N~0,
NORMAL_COMPR N,
NORMAL_COMPR
ESSION(Normal NORMAL_COMPR
ESSION~1, None NULL(Invalid)
Compression), ESSION,
ENHANCED_COM
ENHANCED_COM ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc PRESSION, NULL
NULL~255
ed Compression),
NULL(Invalid)

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~35 N/A None 0~35 None

0~16 N/A None 0~16 None

0~65535 N/A None 0~65535 None

0~23,255 N/A None 0~23,255 255

-600~500,32767 N/A 0.1dBm -60~50,3276.7 32767

NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression), NO_COMPRESSIO
N~0,
NORMAL_COMPR N,
NORMAL_COMPR
ESSION(Normal NORMAL_COMPR
ESSION~1, None NULL(Invalid)
Compression), ESSION,
ENHANCED_COM
ENHANCED_COM ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc PRESSION, NULL
NULL~255
ed Compression),
NULL(Invalid)

0~255 N/A None 0~255 None

0~1048575 N/A None 0~1048575 None

0~62 N/A None 0~62 None

4~5,60~254 N/A None 4~5,60~254 None

0~8 N/A None 0~8 None

0~7 N/A None 0~7 None

0~4294967295 N/A None 0~4294967295 None

DATA_LINK_AVAIL
ABLE(Data Link DATA_LINK_AVAIL DATA_LINK_AVAIL
Available), ABLE~0, ABLE,
None None
DATA_LINK_UNAV DATA_LINK_UNAV DATA_LINK_UNAV
AILABLE(Data Link AILABLE~1 AILABLE
Unavailable)

0~254 N/A None 0~254 None

0~4294967295 N/A None 0~4294967295 None

0~4294967295 N/A None 0~4294967295 None

0~4294967295 N/A microsecond 0~4294967295 None

0~4294967295 N/A None 0~4294967295 None

0~7 N/A None 0~7 None

0~1 N/A None 0~1 None

0~7 N/A None 0~7 None

BIDIRECTIONAL(Bi
directional), BIDIRECTIONAL~0
BIDIRECTIONAL,
FORWARD_DIREC ,
FORWARD_DIREC
TION(Forward_Dire FORWARD_DIREC
None TION, None
ction), TION~1,
BACKWARD_DIRE
BACKWARD_DIRE BACKWARD_DIRE
CTION
CTION(Backward_ CTION~2
Direction)
0~255 N/A None 0~255 None

SF500(500
subframes),
SF750(750
subframes),
SF500~0,
SF1280(1280
SF750~1,
subframes),
SF1280~2, SF500, SF750,
SF1920(1920
SF1920~3, SF1280, SF1920,
subframes), None INFINITY(Infinity)
SF2560~4, SF2560, SF5120,
SF2560(2560
SF5120~5, SF10240, INFINITY
subframes),
SF10240~6,
SF5120(5120
INFINITY~7
subframes),
SF10240(10240
subframes),
INFINITY(Infinity)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)
INVALID(Invalid
Timing
Measurement INVALID(Invalid
Mode), INVALID~0, INVALID, Timing
None
ALLMEASMODE(Al ALLMEASMODE~1 ALLMEASMODE Measurement
l Timing Mode)
Measurement
Mode)
INVALID(NULL),
SF218(218
subframes),
SF343(343
INVALID~0,
subframes),
SF218~218,
SF608(608
SF343~343, INVALID, SF218,
subframes),
SF608~608, SF343, SF608, SF928(928
SF928(928 None
SF928~928, SF928, SF1248, subframes)
subframes),
SF1248~1248, SF2528, SF5088
SF1248(1248
SF2528~2528,
subframes),
SF5088~5088
SF2528(2528
subframes),
SF5088(5088
subframes)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)
0~15 N/A Ts 0~15 15

0~255 N/A None 0~255 None

MS100_T300(100m
s),
MS200_T300(200m
s),
MS300_T300(300m MS100_T300~0, MS100_T300,
s), MS200_T300~1, MS200_T300,
MS400_T300(400m MS300_T300~2, MS300_T300,
s), MS400_T300~3, MS400_T300, MS200_T300(200m
ms
MS600_T300(600m MS600_T300~4, MS600_T300, s)
s), MS1000_T300~5, MS1000_T300,
MS1000_T300(100 MS1500_T300~6, MS1500_T300,
0ms), MS2000_T300~7 MS2000_T300
MS1500_T300(150
0ms),
MS2000_T300(200
0ms)
MS100_T301(100m
s),
MS200_T301(200m
s),
MS300_T301(300m MS100_T301~0, MS100_T301,
s), MS200_T301~1, MS200_T301,
MS400_T301(400m MS300_T301~2, MS300_T301,
s), MS400_T301~3, MS400_T301, MS200_T301(200m
ms
MS600_T301(600m MS600_T301~4, MS600_T301, s)
s), MS1000_T301~5, MS1000_T301,
MS1000_T301(100 MS1500_T301~6, MS1500_T301,
0ms), MS2000_T301~7 MS2000_T301
MS1500_T301(150
0ms),
MS2000_T301(200
0ms)

MS0_T310(0ms),
MS50_T310(50ms),
MS100_T310(100m
MS0_T310~0, MS0_T310,
s),
MS50_T310~1, MS50_T310,
MS200_T310(200m
MS100_T310~2, MS100_T310,
s), MS1000_T310(100
MS200_T310~3, ms MS200_T310,
MS500_T310(500m 0ms)
MS500_T310~4, MS500_T310,
s),
MS1000_T310~5, MS1000_T310,
MS1000_T310(100
MS2000_T310~6 MS2000_T310
0ms),
MS2000_T310(200
0ms)

MS1000_T311(100
0ms),
MS3000_T311(300
0ms),
MS1000_T311~0, MS1000_T311,
MS5000_T311(500
MS3000_T311~1, MS3000_T311,
0ms),
MS5000_T311~2, MS5000_T311,
MS10000_T311(10 MS10000_T311(10
MS10000_T311~3, ms MS10000_T311,
000ms), 000ms)
MS15000_T311~4, MS15000_T311,
MS15000_T311(15
MS20000_T311~5, MS20000_T311,
000ms),
MS30000_T311~6 MS30000_T311
MS20000_T311(20
000ms),
MS30000_T311(30
000ms)

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

n1, n2, n3, n4, n5,
n4(4), n5(5), n6(6), n4~3, n5~4, n6~5, None n1(1)
n6, n8, n10
n8(8), n10(10) n8~6, n10~7

n1(1), n2(2), n3(3), n1~0, n2~1, n3~2,

n1, n2, n3, n4, n6,
n4(4), n6(6), n8(8), n4~3, n6~4, n8~5, None n10(10)
n8, n10, n20
n10(10), n20(20) n10~6, n20~7
0~255 N/A None 0~255 None

1~99 characters N/A None 1~99 characters None

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
NORMAL_CP(Nor
mal), NORMAL_CP~0, NORMAL_CP, NORMAL_CP(Nor
None
EXTENDED_CP(Ex EXTENDED_CP~1 EXTENDED_CP mal)
tended)
NORMAL_CP(Nor
mal), NORMAL_CP~0, NORMAL_CP, NORMAL_CP(Nor
None
EXTENDED_CP(Ex EXTENDED_CP~1 EXTENDED_CP mal)
tended)
1~64 N/A None 1~64 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
18000~46589,5443 18000~46589,5443
N/A None 18000
6~65535 6~65535

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535
CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
), CELL_BW_N6~0, CELL_BW_N6,
CELL_BW_N25(5M CELL_BW_N15~1, CELL_BW_N15,
), CELL_BW_N25~2, CELL_BW_N25,
None None
CELL_BW_N50(10 CELL_BW_N50~3, CELL_BW_N50,
M), CELL_BW_N75~4, CELL_BW_N75,
CELL_BW_N75(15 CELL_BW_N100~5 CELL_BW_N100
M),
CELL_BW_N100(2
0M)
CELL_BW_N6(1.4
M),
CELL_BW_N15(3M
), CELL_BW_N6~0, CELL_BW_N6,
CELL_BW_N25(5M CELL_BW_N15~1, CELL_BW_N15,
), CELL_BW_N25~2, CELL_BW_N25,
None None
CELL_BW_N50(10 CELL_BW_N50~3, CELL_BW_N50,
M), CELL_BW_N75~4, CELL_BW_N75,
CELL_BW_N75(15 CELL_BW_N100~5 CELL_BW_N100
M),
CELL_BW_N100(2
0M)

0~255 N/A None 0~255 None

0~503 N/A None 0~503 None

1~32 N/A None 1~32 1

CELL_DEACTIVE(
Deactivated), CELL_DEACTIVE~ CELL_DEACTIVE, CELL_DEACTIVE(
None
CELL_ACTIVE(Acti 0, CELL_ACTIVE~1 CELL_ACTIVE Deactivated)
ve)

CELL_UNBLOCK(U CELL_UNBLOCK~
CELL_UNBLOCK,
nblock), 0,
CELL_HIGH_BLOC
CELL_HIGH_BLOC CELL_HIGH_BLOC
K,
K(High block), K~1, CELL_UNBLOCK(U
None CELL_MIDDLE_BL
CELL_MIDDLE_BL CELL_MIDDLE_BL nblock)
OCK,
OCK(Middle block), OCK~2,
CELL_LOW_BLOC
CELL_LOW_BLOC CELL_LOW_BLOC
K
K(Low block) K~3

1~1440 N/A min 1~1440 60

CELL_FDD(FDD), CELL_FDD~0, CELL_FDD,
None None
CELL_TDD(TDD) CELL_TDD~1 CELL_TDD
SA0(SA0),
SA1(SA1),
SA0~0, SA1~1,
SA2(SA2), SA0, SA1, SA2,
SA2~2, SA3~3,
SA3(SA3), None SA3, SA4, SA5, SA0(SA0)
SA4~4, SA5~5,
SA4(SA4), SA6
SA6~6
SA5(SA5),
SA6(SA6)
SSP0(SSP0),
SSP1(SSP1),
SSP2(SSP2),
SSP0~0, SSP1~1, SSP0, SSP1,
SSP3(SSP3),
SSP2~2, SSP3~3, SSP2, SSP3,
SSP4(SSP4),
SSP4~4, SSP5~5, None SSP4, SSP5, SSP0(SSP0)
SSP5(SSP5),
SSP6~6, SSP7~7, SSP6, SSP7,
SSP6(SSP6),
SSP8~8, SSP9~9 SSP8, SSP9
SSP7(SSP7),
SSP8(SSP8),
SSP9(SSP9)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
0~837 N/A None 0~837 None
LOW_SPEED(Low
speed cell flag),
HIGH_SPEED(High LOW_SPEED~0, LOW_SPEED,
speed cell flag), HIGH_SPEED~1, HIGH_SPEED,
ULTRA_HIGH_SPE ULTRA_HIGH_SPE ULTRA_HIGH_SPE LOW_SPEED(Low
None
ED(Ultra high ED~2, ED, speed cell flag)
speed cell flag), EXTRA_HIGH_SPE EXTRA_HIGH_SPE
EXTRA_HIGH_SPE ED~3 ED
ED(Extra high
speed cell flag)
0~4 N/A None 0~4 0
1~160000 N/A m 1~160000 10000
NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
12~14,44~50,89~1 1.2~1.4,4.4~5.0,8.9
00,139~150,183~2 N/A 0.1MHz ~10.0,13.9~15.0,18 98
00 .3~20.0
12~14,44~50,89~1 1.2~1.4,4.4~5.0,8.9
00,139~150,183~2 N/A 0.1MHz ~10.0,13.9~15.0,18 98
00 .3~20.0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~16777215 N/A None 0~16777215 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

-30~36 N/A dBm -30~36 23

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
SFN(SFN),
CELL_COMBINATI
ON(Cell SFN~0, SFN,
Combination), CELL_COMBINATI CELL_COMBINATI
TWO_RRU_COMBI ON~1, ON,
NATION(TWO RRU TWO_RRU_COMBI TWO_RRU_COMBI
Combination), NATION~2, None NATION, SFN(SFN)
DIGITAL_COMBINA DIGITAL_COMBINA DIGITAL_COMBINA
TION(Cell Digital TION~3, TION,
Combination), MPRU_AGGREGA MPRU_AGGREGA
MPRU_AGGREGA TION~5 TION
TION(MPRU_AGG
REGATION)
NO_COMPRESSIO
N(No
NO_COMPRESSIO NO_COMPRESSIO
Compression),
N~0, N,
NORMAL_COMPR
NORMAL_COMPR NORMAL_COMPR NO_COMPRESSIO
ESSION(Normal None
ESSION~1, ESSION, N(No Compression)
Compression),
ENHANCED_COM ENHANCED_COM
ENHANCED_COM
PRESSION~2 PRESSION
PRESSION(Enhanc
ed Compression)

2~7 N/A None 2~7 3

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
CRS_PORT_1(1
port),
CRS_PORT_1~1, CRS_PORT_1,
CRS_PORT_2(2 CRS_PORT_2(2
CRS_PORT_2~2, None CRS_PORT_2,
ports), ports)
CRS_PORT_4~4 CRS_PORT_4
CRS_PORT_4(4
ports)
 1T1R~0, 1T2R~1,
1T1R, 1T2R, 2T2R, 1T1R, 1T2R, 2T2R,
2T2R~2, 2T4R~3,
2T4R, 4T4R, 8T8R, None 2T4R, 4T4R, 8T8R, None
4T4R~4, 8T8R~5,
2T8R, 4T8R 2T8R, 4T8R
2T8R~6, 4T8R~7

0~256 characters N/A None 0~256 None

UL_DL(Uplink and
downlink), UL_DL~0, UL_DL(Uplink and
None UL_DL, DL_ONLY
DL_ONLY(Downlink DL_ONLY~1 downlink)
only)

ACTIVE(Active),
ACTIVE~0,
STANDBY(Standby None ACTIVE, STANDBY ACTIVE(Active)
STANDBY~1
)
NOT_CFG(Not
configure),
4T4P_0213(4T4P_
0213),
4T4P_0231(4T4P_
0231), NOT_CFG~0,
4T4P_0123(4T4P_ 4T4P_0213~1,
0123), 4T4P_0231~2,
NOT_CFG,
4T4P_0132(4T4P_ 4T4P_0123~3,
4T4P_0213,
0132), 4T4P_0132~4,
4T4P_0231,
4T4P_0312(4T4P_ 4T4P_0312~5,
4T4P_0123,
0312), 4T4P_0321~6,
4T4P_0132,
4T4P_0321(4T4P_ 4T2P_0011~13,
4T4P_0312,
0321), 4T2P_0101~14,
4T4P_0321,
4T2P_0011(4T2P_0 4T2P_0110~15, NOT_CFG(Not
None 4T2P_0011,
011), 8T2P_00001111~16 configure)
4T2P_0101,
4T2P_0101(4T2P_ ,
4T2P_0110,
0101), 8T2P_00110011~1
8T2P_00001111,
4T2P_0110(4T2P_0 7,
8T2P_00110011,
110), 8T2P_01010101~1
8T2P_01010101,
8T2P_00001111(8T 8,
8T4P_00112233,
2P_00001111), 8T4P_00112233~1
8T4P_01230123
8T2P_00110011(8T 9,
2P_00110011), 8T4P_01230123~2
8T2P_01010101(8T 0
2P_01010101),
8T4P_00112233(8T
4P_00112233),
8T4P_01230123(8T
4P_01230123)

2_TO_1(2:1
Compression),
2_TO_1~0,
3_TO_1(3:1 2_TO_1, 3_TO_1, 2_TO_1(2:1
3_TO_1~1, None
Compression), 4_TO_1 Compression)
4_TO_1~2
4_TO_1(4:1
Compression)
CELL_INST_UNIN
STALL(Uninstall),
CELL_INST_UEM_
CFGING(Inner
CELL_INST_UNIN
software module CELL_INST_UNIN
STALL~0,
configuring), STALL,
CELL_INST_UEM_
CELL_INST_RRU_ CELL_INST_UEM_
CFGING~1,
CFGING(RRU CFGING,
CELL_INST_RRU_
configuring), CELL_INST_RRU_
CFGING~2,
CELL_INST_BBI_C CFGING,
CELL_INST_BBI_C
FGING(BBI CELL_INST_BBI_C
FGING~3,
configuring), FGING,
CELL_INST_RECF
CELL_INST_RECF CELL_INST_RECF
GING~4,
GING(Recfging), GING,
CELL_INST_DELE
CELL_INST_DELE CELL_INST_DELE
TING~5,
TING(Deleting), TING,
CELL_INST_NORM None None
CELL_INST_NORM CELL_INST_NORM
AL~6,
AL(Normal), AL,
CELL_INST_BARR
CELL_INST_BARR CELL_INST_BARR
ED~7,
ED(Barred), ED,
CELL_INST_ALLO
CELL_INST_ALLO CELL_INST_ALLO
CATING_RES~8,
CATING_RES(Alloc CATING_RES,
CELL_INST_CRM_
ating resource), CELL_INST_CRM_
CFGING~9,
CELL_INST_CRM_ CFGING,
CELL_INST_SFN_
CFGING(RRU CELL_INST_SFN_
RECFGING~10,
configuring), RECFGING,
CELL_INST_RRU_
CELL_INST_SFN_ CELL_INST_RRU_
DPD_TRAINING~1
RECFGING(Recfgi DPD_TRAINING
1
ng),
CELL_INST_RRU_
DPD_TRAINING(R
RU DPD Training)

0~4294967295 N/A None 0~4294967295 None

0~32 characters N/A None 0~32 characters None

(UnBlock Cell),
CELL_NO_OP~0,
CELL_SETUP_HE
CELL_SETUP_ACT
ALCHK(Cell
~1, CELL_NO_OP,
Healthy Check),
CELL_SETUP_UBL CELL_SETUP_ACT
CELL_SETUP_141
~2, ,
(141 Cell Setup),
CELL_SETUP_HE CELL_SETUP_UBL
CELL_SETUP_UL
ALCHK~3, ,
WIDESCAN(UL
CELL_SETUP_141 CELL_SETUP_HE
Wide Freq Scan
~4, ALCHK,
Cell Setup),
CELL_SETUP_UL CELL_SETUP_141,
CELL_DEL_BLK_L
WIDESCAN~5, CELL_SETUP_UL
OW(Block Cell
CELL_DEL_BLK_L WIDESCAN,
Low),
OW~26, CELL_DEL_BLK_L
CELL_DEL_BLK_M
CELL_DEL_BLK_M OW,
ID(Block Cell Mid),
ID~27, CELL_DEL_BLK_M
CELL_DEL_BLK_H
CELL_DEL_BLK_H ID,
IGH(Block Cell
IGH~28, CELL_DEL_BLK_H
High),
CELL_DEL_NOUS IGH,
CELL_DEL_NOUS None None
ER~29, CELL_DEL_NOUS
ER(Block Cell No
CELL_DEL_DEA~3 ER,
User),
0, CELL_DEL_DEA,
CELL_DEL_DEA(D
CELL_DEL_RMV~3 CELL_DEL_RMV,
ea Cell),
1, CELl_DEL_HEALC
CELL_DEL_RMV(D
CELl_DEL_HEALC HK,
elete Cell),
HK~32, CELL_DEL_UNHE
CELl_DEL_HEALC
CELL_DEL_UNHE AL,
HK(Cell Healthy
AL~33, CELL_DEL_SETUP
Chk),
CELL_DEL_SETUP _FAIL,
CELL_DEL_UNHE
_FAIL~34, CELL_DEL_141_D
AL(Cell Unhealthy),
CELL_DEL_141_D EL,
CELL_DEL_SETUP
EL~35, CELL_DEL_ULWID
_FAIL(Cell Setup
CELL_DEL_ULWID ESCAN,
Fail),
ESCAN~36, CELL_DEL_CELLN
CELL_DEL_141_D
CELL_DEL_CELLN OACCESSALM
EL(141 Cell Del),
OACCESSALM~11
CELL_DEL_ULWID
2
ESCAN(UL Wide

0~32 characters N/A None 0~32 characters None

(UnBlock Cell),
CELL_NO_OP~0,
CELL_SETUP_HE
CELL_SETUP_ACT
ALCHK(Cell
~1, CELL_NO_OP,
Healthy Check),
CELL_SETUP_UBL CELL_SETUP_ACT
CELL_SETUP_141
~2, ,
(141 Cell Setup),
CELL_SETUP_HE CELL_SETUP_UBL
CELL_SETUP_UL
ALCHK~3, ,
WIDESCAN(UL
CELL_SETUP_141 CELL_SETUP_HE
Wide Freq Scan
~4, ALCHK,
Cell Setup),
CELL_SETUP_UL CELL_SETUP_141,
CELL_DEL_BLK_L
WIDESCAN~5, CELL_SETUP_UL
OW(Block Cell
CELL_DEL_BLK_L WIDESCAN,
Low),
OW~26, CELL_DEL_BLK_L
CELL_DEL_BLK_M
CELL_DEL_BLK_M OW,
ID(Block Cell Mid),
ID~27, CELL_DEL_BLK_M
CELL_DEL_BLK_H
CELL_DEL_BLK_H ID,
IGH(Block Cell
IGH~28, CELL_DEL_BLK_H
High),
CELL_DEL_NOUS IGH,
CELL_DEL_NOUS None None
ER~29, CELL_DEL_NOUS
ER(Block Cell No
CELL_DEL_DEA~3 ER,
User),
0, CELL_DEL_DEA,
CELL_DEL_DEA(D
CELL_DEL_RMV~3 CELL_DEL_RMV,
ea Cell),
1, CELl_DEL_HEALC
CELL_DEL_RMV(D
CELl_DEL_HEALC HK,
elete Cell),
HK~32, CELL_DEL_UNHE
CELl_DEL_HEALC
CELL_DEL_UNHE AL,
HK(Cell Healthy
AL~33, CELL_DEL_SETUP
Chk),
CELL_DEL_SETUP _FAIL,
CELL_DEL_UNHE
_FAIL~34, CELL_DEL_141_D
AL(Cell Unhealthy),
CELL_DEL_141_D EL,
CELL_DEL_SETUP
EL~35, CELL_DEL_ULWID
_FAIL(Cell Setup
CELL_DEL_ULWID ESCAN,
Fail),
ESCAN~36, CELL_DEL_CELLN
CELL_DEL_141_D
CELL_DEL_CELLN OACCESSALM
EL(141 Cell Del),
OACCESSALM~11
CELL_DEL_ULWID
2
ESCAN(UL Wide
Shutdown Mode),
CELL_PWRSAVE_
CARRIERPWROFF
(Intelligent Power-
Off of Carriers
Mode),
CELL_PWRSAVE_ CELL_PWRSAVE_
CELL_PWRSAVE_
LOWPWR_CELLU UNINSTALL~0,
UNINSTALL,
SEDPWRRDU(Low CELL_PWRSAVE_
CELL_PWRSAVE_
Power RFSHD~1,
RFSHD,
Consumption CELL_PWRSAVE_
CELL_PWRSAVE_
Mode-Cell Used CARRIERPWROFF
CARRIERPWROFF
Power Reduced), ~2,
,
CELL_PWRSAVE_ CELL_PWRSAVE_
CELL_PWRSAVE_
LOWPWR_RSPWR LOWPWR_CELLU
LOWPWR_CELLU
RDU(Low Power SEDPWRRDU~3,
SEDPWRRDU,
Consumption CELL_PWRSAVE_
CELL_PWRSAVE_
Mode-Reference LOWPWR_RSPWR
LOWPWR_RSPWR
Signal Power RDU~4,
None RDU, None
Reduced), CELL_PWRSAVE_
CELL_PWRSAVE_
CELL_PWRSAVE_ LOWPWR_RFSHD
LOWPWR_RFSHD,
LOWPWR_RFSHD( ~5,
CELL_PWRSAVE_
Low Power CELL_PWRSAVE_
LOWPWR_CELLS
Consumption LOWPWR_CELLS
HD,
Mode-RF HD~6,
AUTO_PWROFF_R
Shutdown), AUTO_PWROFF_R
FSLEEP,
CELL_PWRSAVE_ FSLEEP~7,
CELL_PWRSAVE_I
LOWPWR_CELLS CELL_PWRSAVE_I
NTERRAT_CELLS
HD(Low Power NTERRAT_CELLS
HD,
Consumption HD~8,
CELL_PWRSAVE_
Mode-Cell CELL_PWRSAVE_
DYNADJVOLT
Shutdown), DYNADJVOLT~9
AUTO_PWROFF_R
FSLEEP(RF
Module Regular
Time Sleep Mode),
CELL_PWRSAVE_I
NTERRAT_CELLS

0~12 characters N/A None 0~12 characters None

BASIC_TYPE(Basic
Type),
TWO_RRU_COMBI
NATION_TYPE(TW
O RRU
BASIC_TYPE~0,
Combination Type), BASIC_TYPE,
TWO_RRU_COMBI
SFN_TYPE(SFN TWO_RRU_COMBI
NATION_TYPE~2,
Type), NATION_TYPE,
SFN_TYPE~3,
BF_TYPE(BF SFN_TYPE,
BF_TYPE~4,
Type), BF_TYPE,
CELL_COMBINATI
CELL_COMBINATI CELL_COMBINATI
ON_TYPE~14, None None
ON_TYPE(Cell ON_TYPE,
DIGITAL_COMBINA
Combination Type), DIGITAL_COMBINA
TION_TYPE~15,
DIGITAL_COMBINA TION_TYPE,
MPRU_AGGREGA
TION_TYPE(Cell MPRU_AGGREGA
TION_TYPE~16,
Digital Combination TION_TYPE,
INVALID_TYPE~25
Type), INVALID_TYPE
5
MPRU_AGGREGA
TION_TYPE(MPRU
Aggregation Type),
INVALID_TYPE(Inv
alid Type)

0~62 N/A None 0~62 None

4~254 N/A None 4~254 None

0~8 N/A None 0~8 None

UNINSTALL(Uninst
all), UNINSTALL~0, UNINSTALL,
SYMBOL_SHUTDO SYMBOL_SHUTDO None SYMBOL_SHUTDO None
WN(Symbol WN~1 WN
shutdown)

-200~65535 N/A 0.1dBm -20~6553.5 None

0~1048575 N/A None 0~1048575 None

0~7 N/A None 0~7 None

0~1 N/A None 0~1 None

0~5 N/A None 0~5 None

not usable), LINK_ABNOMAL~1 NORMAL,

BASEBANDUNIT_ , LINK_ABNOMAL,
ABNORMAL(BBP CFGPARA_INVALI CFGPARA_INVALI
fault or insufficient D~2, D,
BBP resources), RFUNIT_ABNOMA RFUNIT_ABNOMA
DATALINK_ABNOR L~3, L,
MAL(Faulty link for LICENSE_NOT_EN LICENSE_NOT_EN
data services), OUGH~4, OUGH,
RFUNIT_PROCES CLK_NOT_USABL CLK_NOT_USABL
SING(RF module E~5, E,
configuration in BASEBANDUNIT_ BASEBANDUNIT_
progress), ABNORMAL~6, ABNORMAL,
UL_DATA_SYNC_L DATALINK_ABNOR DATALINK_ABNOR
OSS(UL Data Sync MAL~7, MAL,
Abnormal), RFUNIT_PROCES RFUNIT_PROCES
UNAVAILABLE(Dis SING~8, SING,
abled), UL_DATA_SYNC_L UL_DATA_SYNC_L
ANT_FALL_BACK( OSS~9, OSS,
Antenna Fall Back), UNAVAILABLE~10, None UNAVAILABLE, None
L1_CELL_PWR_B ANT_FALL_BACK~ ANT_FALL_BACK,
EYOND(Incorrect 11, L1_CELL_PWR_B
RS power L1_CELL_PWR_B EYOND,
configuration), EYOND~12, BANDWIDTH_CON
BANDWIDTH_CON BANDWIDTH_CON FIG_ERROR,
FIG_ERROR(Incorr FIG_ERROR~13, EARFCN_CONFIG
ect bandwidth EARFCN_CONFIG _ERROR,
configuration), _ERROR~14, CPRI_CONFIG_ER
EARFCN_CONFIG CPRI_CONFIG_ER ROR,
_ERROR(Incorrect ROR~15, BOARD_TYPE_NO
EARFCN BOARD_TYPE_NO T_SUPPORT,
configuration), T_SUPPORT~16, CFG_EXCEED_RF
CPRI_CONFIG_ER CFG_EXCEED_RF _CAPACITY,
ROR(Incorrect _CAPACITY~17, NO_DUAL_MODE_
CPRI interface NO_DUAL_MODE_ LICENSE,
configuration), LICENSE~18, CYCLIC_PREFIX_L
BOARD_TYPE_NO CYCLIC_PREFIX_L ENGTH_CONFLIC
T_SUPPORT(Incorr ENGTH_CONFLIC T

0~255 N/A None 0~255 None

0~2 N/A None 0~2 None

1~64 N/A None 1~64 None

0~5,255 N/A None 0~5,255 255

0~12 characters N/A None 0~12 characters None

0~12 characters N/A None 0~12 characters None

0~12 N/A None 0~12 None

0~4 N/A None 0~4 None

0~4 N/A None 0~4 None

0~2 N/A None 0~2 None

0~2 N/A None 0~2 None

0~2 N/A None 0~2 None

0~1 N/A None 0~1 None

1~7 N/A None 1~7 None

0~35 N/A None 0~35 None

0~35 N/A None 0~35 None

ms5(ms5),
ms10(ms10), ms5~0, ms10~1,
ms5, ms10, ms20,
ms20(ms20), ms20~2, ms40~3, None ms10(ms10)
ms40, ms80
ms40(ms40), ms80~4
ms80(ms80)

0~16 characters N/A None 0~16 characters None

0~32 characters N/A None 0~32 characters None

0~32 characters N/A None 0~32 characters None

PRIMARY(PRIMAR
Y), PRIMARY~0, PRIMARY,
SECONDARY(SEC SECONDARY~1, None SECONDARY, None
ONDARY), INVALIDVALUE~2 INVALIDVALUE
INVALIDVALUE(-)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, ALLOWED(ALLOW
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED ED)
ED)
TRUNCATION(TRU
TRUNCATION~0,
NCATION), TRUNCATION, TRUNCATION(TRU
NO_TRUNCATION None
NO_TRUNCATION( NO_TRUNCATION NCATION)
~1
NO_TRUNCATION)

MACRO(MACRO), MACRO~0,
None MACRO, MICRO MACRO(MACRO)
MICRO(MICRO) MICRO~1

0~31 N/A None 0~31 0

RelaxedBH(Relaxe
dBH), RelaxedBH~0, RelaxedBH,
None None
IdealBH(IdealBH), IdealBH~1, other~2 IdealBH, other
other(other)
0~1048575 N/A None 0~1048575 None

0~65535 N/A None 0~65535 None

0~1048575 N/A None 0~1048575 None

0~60000 N/A m 0~60000 0

INTERFHIGHSPEE
INTERFHIGHSPEE
DSTATUS_NO_OP(
DSTATUS_NO_OP INTERFHIGHSPEE
Disable),
~0, DSTATUS_NO_OP,
INTERFHIGHSPEE
INTERFHIGHSPEE INTERFHIGHSPEE
DSTATUS_ACT(Ru None None
DSTATUS_ACT~1, DSTATUS_ACT,
n),
INTERFHIGHSPEE INTERFHIGHSPEE
INTERFHIGHSPEE
DSTATUS_RENEW DSTATUS_RENEW
DSTATUS_RENEW
~2
(Restore)

0~65535 N/A None 0~65535 None

0~1048575 N/A None 0~1048575 None

EUCELLSECTORE
QM(Sector EUCELLSECTORE EUCELLSECTORE
equipment), QM~0, QM,
None None
EUCELLSECTORE EUCELLSECTORE EUCELLSECTORE
QMGROUP(Sector QMGROUP~1 QMGROUP
equipment group)

EUCELLSECTORE
QM(Sector EUCELLSECTORE EUCELLSECTORE
equipment), QM~0, QM,
None None
EUCELLSECTORE EUCELLSECTORE EUCELLSECTORE
QMGROUP(Sector QMGROUP~1 QMGROUP
equipment group)

0~65535 N/A None 0~65535 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~23,255 N/A None 0~23,255 255

-600~500,32767 N/A 0.1dBm -60~50,32767 32767

0~60 N/A 0.1dB 0~6 0

NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression), NO_COMPRESSIO
N~0,
NORMAL_COMPR N,
NORMAL_COMPR
ESSION(Normal NORMAL_COMPR
ESSION~1, None NULL(Invalid)
Compression), ESSION,
ENHANCED_COM
ENHANCED_COM ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc PRESSION, NULL
NULL~255
ed Compression),
NULL(Invalid)

0~35 N/A None 0~35 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~23,255 N/A None 0~23,255 255

-600~500,32767 N/A 0.1dBm -60~50,3276.7 32767

0~16 N/A None 0~16 None

0~65535 N/A None 0~65535 None

NO_COMPRESSIO
N(No
NO_COMPRESSIO
Compression), NO_COMPRESSIO
N~0,
NORMAL_COMPR N,
NORMAL_COMPR
ESSION(Normal NORMAL_COMPR
ESSION~1, None NULL(Invalid)
Compression), ESSION,
ENHANCED_COM
ENHANCED_COM ENHANCED_COM
PRESSION~2,
PRESSION(Enhanc PRESSION, NULL
NULL~255
ed Compression),
NULL(Invalid)
0~255 N/A None 0~255 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

1~100 N/A % 1~100 50

1~10000 N/A None 1~10000 5
1~100 N/A % 1~100 10
1~100 N/A % 1~100 30
0~28 N/A None 0~28 5

0~28 N/A None 0~28 10

0~1000 N/A None 0~1, step:0.001 125

0~100 N/A None 0~100 0

0~28 N/A None 0~28 5

0~28 N/A None 0~28 10

0~1000 N/A None 0~1, step:0.001 125

0~100 N/A None 0~100 0

1~100 N/A % 1~100 100

1~10000 N/A None 1~10000 100

1~200 N/A 0.1s 0.1~20, step:0.1 50

0~255 N/A None 0~255 None

SINGLE_LAYER_B SINGLE_LAYER_B
SINGLE_LAYER_B
F(Single-Layer BF), F~0, SINGLE_LAYER_B
None F,
DUAL_LAYER_BF( DUAL_LAYER_BF~ F(Single-Layer BF)
DUAL_LAYER_BF
Dual-Layer BF) 1

Latest1st(Latest1st)
,
Latest2nd(Latest2n
d),
Latest3rd(Latest3rd
), Latest1st~0, Latest1st,
Latest4th(Latest4th) Latest2nd~1, Latest2nd,
, Latest3rd~2, Latest3rd,
Latest5th(Latest5th) Latest4th~3, Latest4th,
, Latest5th~4, Latest5th,
None Latest1st(Latest1st)
Latest6th(Latest6th) Latest6th~5, Latest6th,
, Latest7th~6, Latest7th,
Latest7th(Latest7th) Latest8th~7, Latest8th,
, Latest9th~8, Latest9th,
Latest8th(Latest8th) Latest10th~9 Latest10th
,
Latest9th(Latest9th)
,
Latest10th(Latest10
th)

INITIALIZATION(Init
ialization), INITIALIZATION~0, INITIALIZATION,
None NA(NA)
PERIOD(Period), PERIOD~1, NA~2 PERIOD, NA
NA(NA)
SUCCESS(Success
), SUCCESS~0, SUCCESS,
None NA(NA)
FAILURE(Failure), FAILURE~1, NA~2 FAILURE, NA
NA(NA)

0~32 characters N/A None 0~32 characters None

0~1048575 N/A None 0~1048575 None

0~12 characters N/A None 0~12 characters None

0~32 characters N/A None 0~32 characters None

0~32 characters N/A None 0~32 characters None

0~12 characters N/A dB 0~12 characters None

0~12 characters N/A dB 0~12 characters None

AUTO_CONFIG(AU
TO_CONFIG),
CIRCULAR_ANTE
AUTO_CONFIG~0, AUTO_CONFIG,
NNA_ARRAY_BFA
CIRCULAR_ANTE CIRCULAR_ANTE
LG(CIRCULAR_AN
NNA_ARRAY_BFA NNA_ARRAY_BFA AUTO_CONFIG(AU
TENNA_ARRAY_B None
LG~1, LG, TO_CONFIG)
FALG),
LINEAR_ANTENNA LINEAR_ANTENNA
LINEAR_ANTENNA
_ARRAY_BFALG~2 _ARRAY_BFALG
_ARRAY_BFALG(LI
NEAR_ANTENNA_
ARRAY_BFALG)

0~255 N/A None 0~255 None

0~100 N/A % 0~100 10

-10~26 N/A None -10~26 -4

0~1000 N/A None 0~10, step:0.01 10

0~1024 N/A None 0~1, step:1/1024 256

0~255 N/A None 0~255 None

NOT_CFG(Not
configure),
NOT_CFG~0, NOT_CFG,
FIXED_CFG(Fixed NOT_CFG(Not
FIXED_CFG~1, None FIXED_CFG,
configure), configure)
ADAPTIVE_CFG~2 ADAPTIVE_CFG
ADAPTIVE_CFG(A
DAPTIVE_CFG)

ms5(ms5),
ms10(ms10), ms5~0, ms10~1,
ms5, ms10, ms20,
ms20(ms20), ms20~2, ms40~3, None ms5(ms5)
ms40, ms80
ms40(ms40), ms80~4
ms80(ms80)

NotConfigCsiRs(No
tConfigCsiRs), NotConfigCsiRs~0, NotConfigCsiRs,
None None
ConfigCsiRs(Config ConfigCsiRs~1 ConfigCsiRs
CsiRs)
1~1200 N/A None 1~1200 10
1~1200 N/A None 1~1200 200
0~100 N/A % 0~100 50
0~100 N/A % 0~100 40

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~60 N/A s 1~60 30

1~50 N/A 100ms 100~5000 10

0~100 N/A None 0~1, step:0.01 0

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 20

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON None

related commands
from the centralized
control node),
ROUTE_FAILURE(
Faults occurred in
the routes between
the board
functioning as the
centralized control
node and other
boards),
CELL_INST_UNIN
SCH_FAILURE(The
STALL~0,
board used for
SWITCH_OFF~1, CELL_INST_UNIN
enhanced
NO_COMMAND~2, STALL,
scheduling is faulty
ROUTE_FAILURE~ SWITCH_OFF,
or unavailable),
3, NO_COMMAND,
HIGH_LOAD(The
SCH_FAILURE~4, ROUTE_FAILURE,
board is heavily
HIGH_LOAD~5, SCH_FAILURE,
loaded),
CLOCK_FAILURE~ None HIGH_LOAD, None
CLOCK_FAILURE(
6, CLOCK_FAILURE,
The clock accuracy
NOT_IN_CLUSTER NOT_IN_CLUSTER
does not meet the
~7, , SCTP_FAILURE,
requirement),
SCTP_FAILURE~8, GTPU_FAILURE,
NOT_IN_CLUSTER
GTPU_FAILURE~9, LOW_PAYLOAD,
(The cell is not
LOW_PAYLOAD~1 NULL, UNKNOWN
included in a CSPC
0, NULL~254,
cluster),
UNKNOWN~255
SCTP_FAILURE(Th
e SCTP link
between the
eNodeB and the
eCoordinator is
faulty),
GTPU_FAILURE(T
he GTP-U tunnel
between the
eNodeB and the
eCoordinator is
MACRO(Macro),
MACRO~0, MACRO, MICRO,
MICRO(Micro), None None
MICRO~1, NA~2 NA
NA(NA)

DLCOMP_STATUS DLCOMP_STATUS
DLCOMP_STATUS
_NORMAL(), _NORMAL~0,
_NORMAL,
CELL_STATUS_AB CELL_STATUS_AB
CELL_STATUS_AB
NORMAL(), NORMAL~1,
NORMAL,
CLOCK_ABNORM CLOCK_ABNORM
CLOCK_ABNORM
AL(), AL~2,
AL,
DLCOMP_SWITCH DLCOMP_SWITCH
DLCOMP_SWITCH
_OFF_OR_NO_LIC _OFF_OR_NO_LIC None None
_OFF_OR_NO_LIC
ENSE(), ENSE~3,
ENSE,
CLUSTER_ABNOR CLUSTER_ABNOR
CLUSTER_ABNOR
MAL(), MAL~4,
MAL,
LINK_ABNORMAL( LINK_ABNORMAL
LINK_ABNORMAL,
), ~5,
OTHER_ABNORM
OTHER_ABNORM OTHER_ABNORM
AL
AL AL~255
0~255 N/A None 0~255 None

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 5120ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12

1~8 N/A None 1~8 8

r1(1), r2(2), r4(4),
r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None Infinity(Infinity)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)

SAME_AS_TRIG_ SAME_AS_TRIG_
SAME_AS_TRIG_ SAME_AS_TRIG_
QUAN(Same as None QUAN(Same as
QUAN~0, BOTH~1 QUAN, BOTH
Trig Quan), BOTH Trig Quan)

RSRP, RSRQ RSRP~0, RSRQ~1 None RSRP, RSRQ RSRP

0~30 N/A 0.5dB 0~15 4

0ms~0, 40ms~1,
64ms~2, 80ms~3,
100ms~4,
0ms, 40ms, 64ms, 128ms~5, 0ms, 40ms, 64ms,
80ms, 100ms, 160ms~6, 80ms, 100ms,
128ms, 160ms, 256ms~7, 128ms, 160ms,
256ms, 320ms, 320ms~8, 256ms, 320ms,
None 640ms
480ms, 512ms, 480ms~9, 480ms, 512ms,
640ms, 1024ms, 512ms~10, 640ms, 1024ms,
1280ms, 2560ms, 640ms~11, 1280ms, 2560ms,
5120ms 1024ms~12, 5120ms
1280ms~13,
2560ms~14,
5120ms~15
-30~30 N/A 0.5dB -15~15 -13
-30~30 N/A 0.5dB -15~15 -13

0~255 N/A None 0~255 None

0~20 N/A None 0~20 0

0~20 N/A None 0~20 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

NONE(NONE),
BASEBANDPROC NONE~0, NONE,
ESS(BASEBANDP BASEBANDPROC BASEBANDPROC BASEBANDPROC
ROCESS), ESS~1, None ESS, ESS(BASEBANDP
ADAPTIVEPROCE ADAPTIVEPROCE ADAPTIVEPROCE ROCESS)
SS(ADAPTIVEPRO SS~2 SS
CESS)
-30~30 N/A 0.5dB -15~15 -20
-30~30 N/A 0.5dB -15~15 -20
0~15 N/A dB 0~15 0
0~15 N/A dB 0~15 0
0~15 N/A dB 0~15 2

ECOCONFIG( ECO
CONFIG), ECOCONFIG~0, ECOCONFIG, ENODEBAIDCONF
ENODEBAIDCONF ENODEBAIDCONF None ENODEBAIDCONF IG( ENODEBAIDC
IG( ENODEBAIDC IG~1 IG ONFIG)
ONFIG)

0~255 N/A None 0~255 None

10~60 N/A s 10~60 20

0~100 N/A % 0~100 100

0~100 N/A % 0~100 80

1~1000 N/A None 1~1000 2

1~1000 N/A None 1~1000 1

ETWS_PN(ETWS
PN),
ETWS_PN~0, ETWS_PN, ETWS_PN:On,
ETWS_PN_TEST(E
ETWS_PN_TEST~ None ETWS_PN_TEST, ETWS_PN_TEST:O
TWS PN FOR
1, CMAS~2 CMAS ff, CMAS:Off
TEST),
CMAS(CMAS)

1~10080 N/A min 1~10080 60

1~1000 N/A None 1~1000 2

1~1000 N/A None 1~1000 1

0~255 N/A None 0~255 None

ms), _PER_FIVE~3,
SUBFRAME_THRE
SUBFRAME_5_TW SUBFRAME_0_TW
E_PER_FIVE,
O_PER_20(Two O_PER_20~4,
SUBFRAME_FOUR
ABS with 5 per 20 SUBFRAME_3_TW
_PER_FIVE,
ms), O_PER_20~5,
SUBFRAME_0_TW
SUBFRAME_8_TW SUBFRAME_4_TW
O_PER_20,
O_PER_20(Two O_PER_20~6,
SUBFRAME_3_TW
ABS with 8 per 20 SUBFRAME_5_TW
O_PER_20,
ms), O_PER_20~7,
SUBFRAME_4_TW
SUBFRAME_9_TW SUBFRAME_8_TW
O_PER_20,
O_PER_20(Two O_PER_20~8,
SUBFRAME_5_TW
ABS with 9 per 20 SUBFRAME_9_TW
O_PER_20,
ms), O_PER_20~9,
SUBFRAME_8_TW
SUBFRAME_4_9_T SUBFRAME_4_9_T
O_PER_20,
HREE_PER_20(Thr HREE_PER_20~10
SUBFRAME_9_TW
ee ABS with 4/9 per ,
O_PER_20,
20 ms), SUBFRAME_0_5_T
SUBFRAME_4_9_T
SUBFRAME_0_5_T HREE_PER_20~11
HREE_PER_20, SUBFRAME_ONE_
HREE_PER_20(Thr ,
None SUBFRAME_0_5_T PER_FIVE(One
ee ABS with 0/5 per SUBFRAME_3_8_T
HREE_PER_20, ABS per 5 ms)
20 ms), HREE_PER_20~12
SUBFRAME_3_8_T
SUBFRAME_3_8_T ,
HREE_PER_20,
HREE_PER_20(Thr SUBFRAME_3_4_9
SUBFRAME_3_4_9
ee ABS with 3/8 per _THREE_PER_20~
_THREE_PER_20,
20 ms), 13,
SUBFRAME_0_5_F
SUBFRAME_3_4_9 SUBFRAME_0_5_F
OUR_PER_20,
_THREE_PER_20( OUR_PER_20~14,
SUBFRAME_4_9_F
Three ABS with SUBFRAME_4_9_F
OUR_PER_20,
3/4/9 per 20 ms), OUR_PER_20~15,
SUBFRAME_3_8_F
SUBFRAME_0_5_F SUBFRAME_3_8_F
OUR_PER_20,
OUR_PER_20(Four OUR_PER_20~16,
SUBFRAME_0_4_9
ABS with 0/5 per 20 SUBFRAME_0_4_9
_FIVE_PER_20,
ms), _FIVE_PER_20~17
SUBFRAME_0_5_9
SUBFRAME_4_9_F ,
_FIVE_PER_20,
OUR_PER_20(Four SUBFRAME_0_5_9
SUBFRAME_3_4_8
ABS with 4/9 per 20 _FIVE_PER_20~18
_9_FIVE_PER_20,
ms), ,
SUBFRAME_0_4_8
SUBFRAME_3_8_F SUBFRAME_3_4_8

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE DISABLE(Disable)
ENABLE(Enable) ENABLE~1
-30~30 N/A 0.5dB -15~15 -10

1~300 N/A s 1~300 10

0~255 N/A None 0~255 None

CustomFrameOffse
t(User-defined
frame offset),
CustomFrameOffse
TL_FrameOffset(T- CustomFrameOffse
t~0, CustomFrameOffse
L Dual Mode frame t, TL_FrameOffset,
TL_FrameOffset~1, None t(User-defined
offset), TL_FrameOffset_S
TL_FrameOffset_S frame offset)
TL_FrameOffset_S A2_SSP5
A2_SSP5~2
A2_SSP5(T-L Dual
Mode SA2+SSP5
frame offset)

0~261120,275943~ 0~261120,275943~
N/A Ts 0
307200 307200

0~255 N/A None 0~255 None

-30~30 N/A 0.5dB -15~15 -30
-140~-44 N/A dBm -140~-44 -112

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 00:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 06:00:00

0~1440 N/A min 0~1440 120

0~1440 N/A min 0~1440 120

0~1440 N/A min 0~1440 120

10~100 N/A % 10~100 50

-10~0 N/A dB -10~0 -1

1~1440 N/A min 1~1440 5

CUSTOMIZED(Cus
CUSTOMIZED~0, CUSTOMIZED,
tomized),
POLICY1~1, POLICY1, CUSTOMIZED(Cus
POLICY1(Policy1), None
POLICY2~2, POLICY2, tomized)
POLICY2(Policy2),
POLICY3~3 POLICY3
POLICY3(Policy3)

0~255 N/A None 0~255 None

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 0

0~2000 characters N/A None 0~2000 characters None

MBMSSwitch(MBM
MBMSSwitch~0 None MBMSSwitch MBMSSwitch:Off
SSwitch)

0~6 N/A None 0~6 None

1~65535 N/A None 1~65535 None

SERVICECONTINU SERVICECONTINU SERVICECONTINU SERVICECONTINU

None
ITYSWITCH ITYSWITCH~0 ITYSWITCH ITYSWITCH:Off

NEIGHCELLCONFI NEIGHCELLCONFI NEIGHCELLCONFI NEIGHCELLCONFI

GADAPTIVESWITC GADAPTIVESWITC None GADAPTIVESWITC GADAPTIVESWITC
H H~0 H H:Off

0~255 N/A None 0~255 None

0~255 N/A None 0~255 255

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

1~15 N/A None 1~15 1

0~28 N/A None 0~28 0

0~255 N/A None 0~255 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB24(24dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB-24(-24dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

-140~-43 N/A dBm -140~-43 -99

-140~-43 N/A dBm -140~-43 -115

-140~-43 N/A dBm -140~-43 -89

-140~-43 N/A dBm -140~-43 -115

InterfreqA1RsrpSwit
ch(InterfreqA1Rsrp
Switch),
InterfreqA2RsrpSwit InterfreqA1RsrpSwit InterfreqA1RsrpSwit
InterfreqA1RsrpSwit
ch(InterfreqA2Rsrp ch~0, ch:Off,
ch,
Switch), InterfreqA2RsrpSwit InterfreqA2RsrpSwit
InterfreqA2RsrpSwit
A3InterfreqA1Rsrp ch~1, ch:On,
ch,
Switch(A3InterfreqA A3InterfreqA1Rsrp A3InterfreqA1Rsrp
A3InterfreqA1Rsrp
1RsrpSwitch), Switch~2, Switch:Off,
Switch,
A3InterfreqA2Rsrp A3InterfreqA2Rsrp A3InterfreqA2Rsrp
None A3InterfreqA2Rsrp
Switch(A3InterfreqA Switch~3, Switch:On,
Switch,
2RsrpSwitch), InterfreqA3CioSwitc InterfreqA3CioSwitc
InterfreqA3CioSwitc
InterfreqA3CioSwitc h~4, h:On,
h,
h(InterfreqA3CioSwi InterfreqA4CioSwitc InterfreqA4CioSwitc
InterfreqA4CioSwitc
tch), h~5, h:On,
h,
InterfreqA4CioSwitc InterfreqA5Switch~ InterfreqA5Switch:
InterfreqA5Switch
h(InterfreqA4CioSwi 6 On
tch),
InterfreqA5Switch(I
nterfreqA5Switch)

0~255 N/A None 0~255 None

SRSPC_SINR_BAS
ED( SRSPC_SINR_
SRSPC_SINR_BAS SRSPC_SINR_BAS
BASED), SRSPC_SINR_BAS
ED~0, ED,
SRSPC_SINR_RS None ED( SRSPC_SINR_
SRSPC_SINR_RS SRSPC_SINR_RS
RP_BASED( SRSP BASED)
RP_BASED~1 RP_BASED
C_SINR_RSRP_BA
SED)
NOT_USE_P0NOM
INALPUCCH(Not
Use NOT_USE_P0NOM NOT_USE_P0NOM NOT_USE_P0NOM
P0NominalPUCCH) INALPUCCH~0, INALPUCCH, INALPUCCH(Not
None
, USE_P0NOMINAL USE_P0NOMINAL Use
USE_P0NOMINAL PUCCH~1 PUCCH P0NominalPUCCH)
PUCCH(Use
P0NominalPUCCH)

1~10 N/A 20ms 20~200 10

0~15 N/A dB 0~15 0

-126~24 N/A dBm -126~24 -82

-30~30 N/A 0.5dB -15~15 -10
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
 80dB~0, 85dB~1,
90dB~2, 95dB~3,
80dB, 85dB, 90dB, 100dB~4, 105dB~5, 80dB, 85dB, 90dB,
95dB, 100dB, 110dB~6, 115dB~7, 95dB, 100dB,
105dB, 110dB, 120dB~8, 125dB~9, 105dB, 110dB,
115dB, 120dB, 130dB~10, 115dB, 120dB,
None 110dB
125dB, 130dB, 135dB~11, 125dB, 130dB,
135dB, 140dB, 140dB~12, 135dB, 140dB,
145dB, 150dB, 145dB~13, 145dB, 150dB,
155dB, 160dB 150dB~14, 155dB, 160dB
155dB~15,
160dB~16

-50~50 N/A dB -50~50 1

-140~-43 N/A dBm -140~-43 -118

1~1, 2~2, 3~3, 4~4,

5~5, 6~6, 7~7, 8~8,
1, 2, 3, 4, 5, 6, 7, 8, 1, 2, 3, 4, 5, 6, 7, 8,
9~9, 10~10, 11~11,
9, 10, 11, 12, 13, 9, 10, 11, 12, 13,
12~12, 13~13, None 8
14, 15, 16, 14, 15, 16,
14~14, 15~15,
ADAPTIVE ADAPTIVE
16~16,
ADAPTIVE~17
Normal(0), Us(1), Normal~0, Us~1, Normal, Us,
ULBigPkt(2), ULBigPkt~2, None ULBigPkt, Normal(0)
UsOrUlBigPkt(3) UsOrUlBigPkt~3 UsOrUlBigPkt
0~10 N/A 0.01 0~0.1, step:0.01 2
 1~1, 2~2, 3~3, 4~4,
5~5, 6~6, 7~7, 8~8,
1, 2, 3, 4, 5, 6, 7, 8, 1, 2, 3, 4, 5, 6, 7, 8,
9~9, 10~10, 11~11,
9, 10, 11, 12, 13, 9, 10, 11, 12, 13,
12~12, 13~13, None 8
14, 15, 16, 14, 15, 16,
14~14, 15~15,
SameAsNs SameAsNs
16~16,
SameAsNs~17
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

70~140 N/A dB 70~140 125

-118~-100 N/A dBm -118~-100 -111

0~255 N/A None 0~255 None

1~100 N/A % 1~100 80

1~100 N/A % 1~100 80

0~50 N/A % 0~50 0

1~100 N/A % 1~100 10

0~255 N/A None 0~255 None

0~100000 N/A m 0~100000 0
-100~1000 N/A % -100~1000 0

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

10~600 N/A s 10~600 30

-115~-80 N/A dBm -115~-80 -108

5~35 N/A dB 5~35 5

0~255 N/A None 0~255 None

1~15 N/A None 1~15 5

1~15 N/A None 1~15 10

10~99 N/A % 10~99 90

10~99 N/A % 10~99 90

10~99 N/A % 10~99 90

10~99 N/A % 10~99 90

0~90 N/A % 0~90 5
0~90 N/A % 0~90 5
0~90 N/A % 0~90 5
0~99 N/A % 0~99 65
0~99 N/A % 0~99 65
0~99 N/A % 0~99 65
0~99 N/A % 0~99 65
0~50 N/A % 0~50 20
10~100 N/A % 10~100 95
10~100 N/A % 10~100 90

0~30 N/A None 0~30 0

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 00:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 06:00:00

0~7 N/A dB 0~7 3

0~100 N/A % 0~100 0

0~100 N/A % 0~100 0

0~100 N/A % 0~100 0

0~100 N/A % 0~100 0

0~20 N/A None 0~20 0

RF_INTELLIGENT_
SHUTDOWN(Enteri
ng the RF channel
intelligent shutdown
state),
DELAY_FOR_30MI
NUTES(Not
entering because UE_CONNECTED_
the state is delayed EXCEED~0, UE_CONNECTED_
for 30 minutes), LOAD_SIMULATIO EXCEED,
WRONG_REQ_FO N_ENABLED~1, LOAD_SIMULATIO
R_PA_CCE(Not LCS_ENABLED~2, N_ENABLED,
entering because RF_INTELLIGENT_ LCS_ENABLED,
the cell bandwidth, SHUTDOWN~3, RF_INTELLIGENT_
PA value, or CCE DELAY_FOR_30MI SHUTDOWN,
aggregation level NUTES~4, DELAY_FOR_30MI
for common WRONG_REQ_FO NUTES,
signaling does not R_PA_CCE~5, WRONG_REQ_FO
meet requirements), WRONG_ANTENN None R_PA_CCE, None
WRONG_ANTENN AS_NUM~6, WRONG_ANTENN
AS_NUM(Not POWER_INFSUFFI AS_NUM,
entering because CIENT~7, POWER_INFSUFFI
the number of SWITCH_OFF~8, CIENT,
antennas does not OTHERS~9, SWITCH_OFF,
meet requirements), MBSFN_ENABLED OTHERS,
POWER_INFSUFFI ~10, MBSFN_ENABLED
CIENT(Not entering QCI1_UE_EXIST~1 , QCI1_UE_EXIST,
because the power 1, RB_RATIO_EXCEE
is insufficient), RB_RATIO_EXCEE D
SWITCH_OFF(Not D~12
entering because
the switch is turned
off), OTHERS(Not
entering because of
other reasons),
MBSFN_ENABLED
(Not entering
SWITCH_TURN_O
FF(The switch is
turned off),
TIME_EXPIRES(Ti
me expires),
UE_CONNECTED_
EXCEED(The
number of UEs in
connected mode
SWITCH_TURN_O
exceeds threshold),
FF~0, SWITCH_TURN_O
POWER_INSUFFIC
TIME_EXPIRES~1, FF,
IENT(The power is
UE_CONNECTED_ TIME_EXPIRES,
insufficient),
EXCEED~2, UE_CONNECTED_
INITIAL_ENTERIN
POWER_INSUFFIC EXCEED,
G(None (Initial
IENT~3, POWER_INSUFFIC
entering)),
INITIAL_ENTERIN IENT,
LOAD_SIMULATIO
G~4, INITIAL_ENTERIN
N_ENABLE(Load
LOAD_SIMULATIO None G, None
simulation is
N_ENABLE~5, LOAD_SIMULATIO
enabled),
LCS_ENABLED~6, N_ENABLE,
LCS_ENABLED(LC
OTHERS~7, LCS_ENABLED,
S is enabled),
MBSFN_ENABLED OTHERS,
OTHERS(0ther
~8, MBSFN_ENABLED
reasons),
QCI1_UE_EXIST~9 , QCI1_UE_EXIST,
MBSFN_ENABLED
, RB_RATIO_EXCEE
(MBSFN shutdown
RB_RATIO_EXCEE D
switch and symbol
D~10
shutdown switch
are all enabled),
QCI1_UE_EXIST(T
he existence of
QCI=1 UEs),
RB_RATIO_EXCEE
D(The UL/DL PRB
ratio exceeds the
PRB threshold)

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~2 N/A None 0~2 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

CellConStaReportS
witch(CellConStaRe
CellConStaReportS
portSwitch), CellConStaReportS CellConStaReportS
witch:Off,
FPIGTPUSwitch(FP witch~0, witch,
FPIGTPUSwitch:Off
IGTPUSwitch), FPIGTPUSwitch~1, FPIGTPUSwitch,
,
DSCPRemarkSwitc DSCPRemarkSwitc None DSCPRemarkSwitc
DSCPRemarkSwitc
h(DSCPRemarkSwi h~2, h,
h:Off,
tch), CellUuConStaRepo CellUuConStaRepo
CellUuConStaRepo
CellUuConStaRepo rtSwitch~3 rtSwitch
rtSwitch:Off
rtSwitch(CellUuCon
StaReportSwitch)

1~100 N/A % 1~100 75

1~100 N/A % 1~100 85
1~10000 N/A None 1~10000 150
1~10000 N/A None 1~10000 200

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 1

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 10

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 00:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 06:00:00

0~100 N/A % 0~100 20

0~100 N/A % 0~100 20

0~100 N/A % 0~100 20

0~100 N/A % 0~100 20

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~15 N/A None 1~15 6

1~120 N/A ms 1~120 10

0~255 N/A None 0~255 None

-30~30 N/A 0.5dB -15~15 -10

0~255 N/A None 0~255 None

ULSCH_STRATEG
ULSCH_STRATEG ULSCH_STRATEG
Y_EPF(EPF),
Y_EPF~0, Y_EPF,
ULSCH_STRATEG
ULSCH_STRATEG ULSCH_STRATEG
Y_MAX_CI(MAX_C
Y_MAX_CI~1, Y_MAX_CI, ULSCH_STRATEG
I), None
ULSCH_STRATEG ULSCH_STRATEG Y_EPF(EPF)
ULSCH_STRATEG
Y_PF~2, Y_PF,
Y_PF(PF),
ULSCH_STRATEG ULSCH_STRATEG
ULSCH_STRATEG
Y_RR~3 Y_RR
Y_RR(RR)
ADAPTIVE_HARQ_
ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
SW_ON(On),
SW_ON~0, SW_ON,
ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
SW_OFF(Off), None SW_SEMI_ON(Se
SW_OFF~1, SW_OFF,
ADAPTIVE_HARQ_ miOn)
ADAPTIVE_HARQ_ ADAPTIVE_HARQ_
SW_SEMI_ON(Se
SW_SEMI_ON~2 SW_SEMI_ON
miOn)
 0.01~0.99,
1~99 N/A None 10
step:0.01

0~100 N/A % 0~100 25

1~40 N/A ms 1~40 5

45~1500 N/A byte 45~1500 80

HOPPING_OFF(Ho
pping off), HOPPING_OFF~0,
HOPPING_TYPE1( HOPPING_TYPE1~ HOPPING_OFF,
Hopping Type 1), 1, HOPPING_TYPE1,
HOPPING_OFF(Ho
HOPPING_TYPE2( HOPPING_TYPE2~ None HOPPING_TYPE2,
pping off)
Hopping Type 2), 2, HOPPING_TYPE2_
HOPPING_TYPE2_ HOPPING_TYPE2_ RANDOM
RANDOM(Hopping RANDOM~3
Type 2 Random)

0~100 N/A % 0~100 0

16~15000 N/A bit 16~15000 600

2~3 N/A None 2~3 2

0~2000 N/A ms 0~2000 0

EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT

OR_1(1), OR_1~0, OR_1,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT01(0.01), OR_0DOT01~1, OR_0DOT01,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT5(0.5), OR_0DOT5~2, OR_0DOT5, EPF_CAPC_FACT
None
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT OR_1(1)
OR_2(2), OR_2~3, OR_2,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_3(3), OR_3~4, OR_3,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_4(4) OR_4~5 OR_4
FS_NONFS_ADAP
TIVE(Fs nonFs
FS_NONFS_ADAP FS_NONFS_ADAP FS_INRANDOM_A
Strategy),
TIVE~0, TIVE, DAPTIVE(Fs
FS_INRANDOM_A None
FS_INRANDOM_A FS_INRANDOM_A InRandom
DAPTIVE(Fs
DAPTIVE~1 DAPTIVE Strategy)
InRandom
Strategy)

CLASS_0(CLASS_
0), CLASS_0~0, CLASS_0, CLASS_0(CLASS_
None
CLASS_1(CLASS_ CLASS_1~1 CLASS_1 0)
1)
1~8 N/A None 1~8 5

0~2000 N/A ms 0~2000 0

ms20(20ms),
ms40(40ms), ms20~0, ms40~1, ms20, ms40,
None ms20(20ms)
ADAPTIVE(ADAPTI ADAPTIVE~2 ADAPTIVE
VE)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~4 N/A None 0~4 0

NO_DELAYSCH(N
o Delay
NO_DELAYSCH~0, NO_DELAYSCH(N
Scheduling), NO_DELAYSCH,
VOIP_DELAYSCH~ None o Delay
VOIP_DELAYSCH( VOIP_DELAYSCH
1 Scheduling)
VoIP Service Delay
Scheduling)

6~120 N/A None 6~120 15

0~100000 N/A bit 0~100000 4000

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

NEW_TX(NEW_TX
NEW_TX~0,
), NEW_TX, ADAPTIVE_RETX(
ADAPTIVE_RETX~ None
ADAPTIVE_RETX( ADAPTIVE_RETX ADAPTIVE_RETX)
1
ADAPTIVE_RETX)
0~20 N/A None 0~20 0
UlVoipPreAllocation
Swtich(UlVoipPreAll
ocationSwtich),
UlVoipDelaySchSwi UlVoipPreAllocation UlVoipPreAllocation UlVoipPreAllocation
tch(UlVoipDelaySch Swtich~0, Swtich, Swtich:Off,
Switch), UlVoipDelaySchSwi UlVoipDelaySchSwi UlVoipDelaySchSwi
UlVoIPLoadBasedS tch~1, tch, tch:Off,
chSwitch(UlVoIPLo UlVoIPLoadBasedS UlVoIPLoadBasedS UlVoIPLoadBasedS
None
adBasedSchSwitch chSwitch~2, chSwitch, chSwitch:Off,
), UlVoipSchOptSwitc UlVoipSchOptSwitc UlVoipSchOptSwitc
UlVoipSchOptSwitc h~3, h, h:Off,
h(UlVoipSchOptSwi UlVoLTEDataSizeE UlVoLTEDataSizeE UlVoLTEDataSizeE
tch), stSwitch~4 stSwitch stSwitch:Off
UlVoLTEDataSizeE
stSwitch(UlVoLTED
ataSizeEstSwitch)
-500~500 N/A 0.1dB -50~50 0

-30~30 N/A 0.5dB -15~15 -20

N5_TTIB_ENTER(5 N5_TTIB_ENTER~
), 0,
N10_TTIB_ENTER( N10_TTIB_ENTER N5_TTIB_ENTER,
10), ~1, N10_TTIB_ENTER, N10_TTIB_ENTER(
None
N15_TTIB_ENTER( N15_TTIB_ENTER N15_TTIB_ENTER, 10)
15), ~2, N20_TTIB_ENTER
N20_TTIB_ENTER( N20_TTIB_ENTER
20) ~3
N10_TTIB_EXIT(10
),
N20_TTIB_EXIT(20 N10_TTIB_EXIT~0, N10_TTIB_EXIT,
), N20_TTIB_EXIT~1, N20_TTIB_EXIT, N20_TTIB_EXIT(20
None
N40_TTIB_EXIT(40 N40_TTIB_EXIT~2, N40_TTIB_EXIT, )
), N80_TTIB_EXIT~3 N80_TTIB_EXIT
N80_TTIB_EXIT(80
)
3~6 N/A None 3~6 5
0~7 N/A None 0~7 4

n4(4), n8(8),
n4~0, n8~1, n12~2,
n12(12), n16(16), n4, n8, n12, n16,
n16~3, n20~4, None n16(16)
n20(20), n24(24), n20, n24, n28
n24~5, n28~6
n28(28)
SERVICE_VOIP(S
ERVICE_VOIP), SERVICE_VOIP~0, SERVICE_VOIP,
SERVICE_VOIP(S
SERVICE_MULTIA SERVICE_MULTIA None SERVICE_MULTIA
ERVICE_VOIP)
PP(SERVICE_MUL PP~1 PP
TIAPP)

FastReportDopSwit
FastReportDopSwit FastReportDopSwit FastReportDopSwit
ch(FastReportDopS None
ch~0 ch ch:Off
witch)
OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

0~10000 N/A None 0~10000 10000

0~1000000 N/A bit 0~1000000 10000
 0bit~0, 32bit~1,
0bit, 32bit, 48bit, 0bit, 32bit, 48bit,
48bit~2, 64bit~3,
64bit, 80bit, 96bit, None 64bit, 80bit, 96bit, 0bit
80bit~4, 96bit~5,
128bit 128bit
128bit~6

SAME_AS_OTHER
_SERVICE(SAME_
SAME_AS_OTHER
AS_OTHER_SERVI SAME_AS_OTHER SAME_AS_OTHER
_SERVICE~0,
CE), 1ms(1ms), _SERVICE, 1ms, _SERVICE(SAME_
1ms~1, 2ms~2, None
2ms(2ms), 2ms, 3ms, 4ms, AS_OTHER_SERVI
3ms~3, 4ms~4,
3ms(3ms), 5ms CE)
5ms~5
4ms(4ms),
5ms(5ms)
SAME_AS_OTHER
_SERVICE(SAME_
AS_OTHER_SERVI
CE),
SAME_AS_OTHER
80BYTE(80BYTE), SAME_AS_OTHER
_SERVICE~0,
160BYTE(160BYTE _SERVICE,
80BYTE~1, SAME_AS_OTHER
), 80BYTE, 160BYTE,
160BYTE~2, _SERVICE(SAME_
320BYTE(320BYTE None 320BYTE,
320BYTE~3, AS_OTHER_SERVI
), 640BYTE,
640BYTE~4, CE)
640BYTE(640BYTE 1280BYTE,
1280BYTE~5,
), 2560BYTE
2560BYTE~6
1280BYTE(1280BY
TE),
2560BYTE(2560BY
TE)

TWO_MODE_BAS TWO_MODE_BAS TWO_MODE_BAS

ED_ON_PCI(), ED_ON_PCI~0, ED_ON_PCI, TWO_MODE_BAS
None
THREE_MODE_BA THREE_MODE_BA THREE_MODE_BA ED_ON_PCI
SED_ON_PCI() SED_ON_PCI~1 SED_ON_PCI
1~99 N/A None 0.01~0.99,0.01 10

2~1800 N/A s 2~1800 1800

0~255 N/A None 0~255 None

0~200 N/A % 0~200 50

0~200 N/A % 0~200 10
1~20000 N/A None 1~20000 2000
1~20000 N/A None 1~20000 1000
1~1200 N/A None 1~1200 400
1~1200 N/A None 1~1200 250

0~255 N/A None 0~255 None

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
arameter3_bit10), ~6, Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit8 RsvdSwPara3_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara3_bit1
arameter3_bit11), RsvdSwPara3_bit9 RsvdSwPara3_bit9:
1,
RsvdSwPara3_bit1 ~8, Off,
RsvdSwPara3_bit1
2(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
2,
arameter3_bit12), 0~9, 0:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara3_bit1
arameter3_bit13), RsvdSwPara3_bit1 RsvdSwPara3_bit1
4,
RsvdSwPara3_bit1 2~11, 2:Off,
RsvdSwPara3_bit1
4(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
5,
arameter3_bit14), 3~12, 3:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara3_bit1
arameter3_bit15), RsvdSwPara3_bit1 RsvdSwPara3_bit1
7,
RsvdSwPara3_bit1 5~14, 5:Off,
RsvdSwPara3_bit1
6(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
8,
arameter3_bit16), 6~15, 6:Off,
None RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara3_bit2
arameter3_bit17), RsvdSwPara3_bit1 RsvdSwPara3_bit1
0,
RsvdSwPara3_bit1 8~17, 8:Off,
RsvdSwPara3_bit2
8(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
1,
arameter3_bit18), 9~18, 9:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1 RsvdSwPara3_bit2 RsvdSwPara3_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara3_bit2
arameter3_bit19), RsvdSwPara3_bit2 RsvdSwPara3_bit2
3,
RsvdSwPara3_bit2 1~20, 1:Off,
RsvdSwPara3_bit2
0(ReservedSwitchP RsvdSwPara3_bit2 RsvdSwPara3_bit2
4,
arameter3_bit20), 2~21, 2:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2 RsvdSwPara3_bit2 RsvdSwPara3_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara3_bit2
arameter3_bit21), RsvdSwPara3_bit2 RsvdSwPara3_bit2
6,
RsvdSwPara3_bit2 4~23, 4:Off,
RsvdSwPara3_bit2
2(ReservedSwitchP RsvdSwPara3_bit2 RsvdSwPara3_bit2
7,
arameter3_bit22), 5~24, 5:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2 RsvdSwPara3_bit2 RsvdSwPara3_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 03:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 05:00:00

0~5000 N/A None 0~5000 20

0~100 N/A % 0~100 10

0~100 N/A % 0~100 10

BY_UTRAN_WITH
OUT_LOAD(By
UTRAN without
BY_UTRAN_WITH BY_UTRAN_WITH
load),
OUT_LOAD~0, OUT_LOAD,
BY_UTRAN_WITH
BY_UTRAN_WITH BY_UTRAN_WITH
_LOAD(By UTRAN BY_UTRAN_WITH
_LOAD~1, _LOAD,
with load), OUT_LOAD(By
BY_GERAN_WITH None BY_GERAN_WITH
BY_GERAN_WITH UTRAN without
_LOAD~2, _LOAD,
_LOAD(By GERAN load)
BY_UTRAN_AND_ BY_UTRAN_AND_
with load),
GERAN_WITH_LO GERAN_WITH_LO
BY_UTRAN_AND_
AD~3 AD
GERAN_WITH_LO
AD( By UTRAN and
GERAN with load)

1~15 N/A None 1~15 5

0~100 N/A % 0~100 30

0~100 N/A % 0~100 40

0~100 N/A % 0~100 15

0~100 N/A % 0~100 40

0~100 N/A % 0~100 25

0~100 N/A % 0~100 20

0~255 N/A None 0~255 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 03:00:00

1~1440 N/A 0.5h 0.5~720 48

0~100 N/A 0.1m 0~10 0

0~255 N/A None 0~255 None

0~99 N/A None 0~99 None

0~255 N/A None 0~255 None

0~99 N/A None 0~99 0

0~99 N/A None 0~99 5

0~100 N/A % 0~100 25

0~100 N/A % 0~100 5

-140~-43 N/A dBm -140~-43 -80

1~60 N/A dB 1~60 20

0~20 N/A dB 0~20 5

-120~-25 N/A dBm -120~-25 -103

0~600 N/A s 0~600 30

0~255 N/A None 0~255 None

50~600 N/A s 50~600 50

-115~-80 N/A dBm -115~-80 -100

5~35 N/A dB 5~35 15

0~255 N/A None 0~255 None

0~1048576 N/A kbps 0~1048576 500

0~1048576 N/A kbps 0~1048576 1024

0~1048576 N/A kbps 0~1048576 2048

0~1048576 N/A kbps 0~1048576 5120

0~1048576 N/A kbps 0~1048576 10240

0~10000 N/A ms 0~10000 150

0~10000 N/A ms 0~10000 250

0~10000 N/A ms 0~10000 150

0~10000 N/A ms 0~10000 250

0~255 N/A None 0~255 None

RachAdjSwitch(Rac
hAdjSwitch),
HoRaSwitch(HoRa
Switch),
UnsyncRaSwitch(U
nsyncRaSwitch), RachAdjSwitch:Off,
RachAdjSwitch~0,
MaksIdxSwitch(Mak RachAdjSwitch, HoRaSwitch:On,
HoRaSwitch~1,
sIdxSwitch), HoRaSwitch, UnsyncRaSwitch:O
UnsyncRaSwitch~2
BackOffSwitch(Bac UnsyncRaSwitch, n,
, MaksIdxSwitch~3,
kOffSwitch), MaksIdxSwitch, MaksIdxSwitch:Off,
BackOffSwitch~4,
UeRaInforInqSwitch BackOffSwitch, BackOffSwitch:Off,
UeRaInforInqSwitch
(UeRaInforInqSwitc UeRaInforInqSwitch UeRaInforInqSwitch
~5,
h), , :Off,
PRACHFalseAlarm None
PRACHFalseAlarm PRACHFalseAlarm PRACHFalseAlarm
DetSwitch~6,
DetSwitch(PRACHF DetSwitch, DetSwitch:Off,
RachPwrAdjSwitch
alseAlarmDetSwitch RachPwrAdjSwitch, RachPwrAdjSwitch:
~7,
), ForbidAcByRadiusS Off,
ForbidAcByRadiusS
RachPwrAdjSwitch( witch, ForbidAcByRadiusS
witch~8,
RachPwrAdjSwitch) PrachFreqAdjSwitc witch:Off,
PrachFreqAdjSwitc
, h PrachFreqAdjSwitc
h~9
ForbidAcByRadiusS h:Off
witch(ForbidAcByR
adiusSwitch),
PrachFreqAdjSwitc
h(PrachFreqAdjSwit
ch)
SrsSubframeRecfS
SrsSubframeRecfS SrsSubframeRecfS SrsSubframeRecfS
witch(SrsSubframe None
witch~0 witch witch:On
RecfSwitch)
PucchSwitch(Pucch
Switch), PucchSwitch~0, PucchSwitch, PucchSwitch:On,
PucchFlexCfgSwitc PucchFlexCfgSwitc None PucchFlexCfgSwitc PucchFlexCfgSwitc
h(PucchFlexCfgSwi h~1 h h:Off
tch)

AqmAlgoSwitch AqmAlgoSwitch~0 None AqmAlgoSwitch AqmAlgoSwitch:Off

CqiAdjAlgoSwitch(C
qiAdjAlgoSwitch),
StepVarySwitch(Ste
pVarySwitch),
DlVarIBLERtargetS
witch(DlVarIBLERta
rgetSwitch),
CqiAdjAlgoSwitch~ CqiAdjAlgoSwitch:O
TddBundlingCqiAdj CqiAdjAlgoSwitch,
0, n,
OptSwitch(TddBun StepVarySwitch,
StepVarySwitch~1, StepVarySwitch:Off,
dlingCqiAdjOptSwit DlVarIBLERtargetS
DlVarIBLERtargetS DlVarIBLERtargetS
ch), witch,
witch~2, witch:Off,
TddMultiplexingCqi TddBundlingCqiAdj
TddBundlingCqiAdj TddBundlingCqiAdj
AdjOptSwitch(TddM OptSwitch,
OptSwitch~3, OptSwitch:Off,
ultiplexingCqiAdjOp TddMultiplexingCqi
TddMultiplexingCqi TddMultiplexingCqi
tSwitch), AdjOptSwitch,
AdjOptSwitch~4, AdjOptSwitch:Off,
AdaptiveStepVaryS AdaptiveStepVaryS
AdaptiveStepVaryS AdaptiveStepVaryS
witch(AdaptiveStep witch,
witch~5, None witch:Off,
VarySwitch), DlCqiAdjDeltaOptS
DlCqiAdjDeltaOptS DlCqiAdjDeltaOptS
DlCqiAdjDeltaOptS witch,
witch~6, witch:Off,
witch(DlCqiAdjDelta DlEnVarIblerTarget
DlEnVarIblerTarget DlEnVarIblerTarget
OptSwitch), Switch,
Switch~7, Switch:Off,
DlEnVarIblerTarget DlRetxTbsIndexAdj
DlRetxTbsIndexAdj DlRetxTbsIndexAdj
Switch(DlEnVarIbler OptSwitch,
OptSwitch~8, OptSwitch:Off,
TargetSwitch), CfiConvertOptSwitc
CfiConvertOptSwitc CfiConvertOptSwitc
DlRetxTbsIndexAdj h,
h~9, h:Off,
OptSwitch(DlRetxT BundlingOptThdSwi
BundlingOptThdSwi BundlingOptThdSwi
bsIndexAdjOptSwit tch
tch~10 tch:Off
ch),
CfiConvertOptSwitc
h(CfiConvertOptSwi
tch),
BundlingOptThdSwi
tch(BundlingOptThd
Switch)

DynAdjVoltSwitch(D DynAdjVoltSwitch~ DynAdjVoltSwitch:O

None DynAdjVoltSwitch
ynAdjVoltSwitch) 0 ff
DlSwitch(dlCacSwit
ch),
UlSwitch(ulCacSwit
ch),
DlPredictSwitch(dlC
DlSwitch~0, DlSwitch:Off,
acPredictSwitch),
UlSwitch~1, DlSwitch, UlSwitch, UlSwitch:Off,
UlPredictSwitch(ulC
DlPredictSwitch~2, DlPredictSwitch, DlPredictSwitch:Off,
acPredictSwitch),
UlPredictSwitch~3, UlPredictSwitch, UlPredictSwitch:Off,
GbrUsageSwitch(G
GbrUsageSwitch~4, GbrUsageSwitch, GbrUsageSwitch:Of
brUsedPRbCheckS None
DlLdcSwitch~5, DlLdcSwitch, f, DlLdcSwitch:Off,
witch),
UlLdcSwitch~6, UlLdcSwitch, UlLdcSwitch:Off,
DlLdcSwitch(dlLdcS
RelDrbSwitch~7, RelDrbSwitch, RelDrbSwitch:Off,
witch),
PreemptionSwitch~ PreemptionSwitch PreemptionSwitch:
UlLdcSwitch(ulLdcS
8 Off
witch),
RelDrbSwitch(LdcD
rbRelSwitch),
PreemptionSwitch(
PreemptionSwitch)
IntraFreqMlbSwitch(
IntraFreqMlbSwitch)
,
InterFreqMlbSwitch(
InterFreqMlbSwitch) IntraFreqMlbSwitch:
, Off,
IntraFreqMlbSwitch
UtranMlbSwitch(Utr InterFreqMlbSwitch:
~0,
anMlbSwitch), Off,
InterFreqMlbSwitch IntraFreqMlbSwitch,
GeranMlbSwitch(G UtranMlbSwitch:Off,
~1, InterFreqMlbSwitch,
eranMlbSwitch), GeranMlbSwitch:Off
UtranMlbSwitch~2, UtranMlbSwitch,
CdmaMlbSwitch(Cd ,
GeranMlbSwitch~3, GeranMlbSwitch,
maMlbSwitch), CdmaMlbSwitch:Off
CdmaMlbSwitch~4, CdmaMlbSwitch,
IntraFreqIdleMlbSwi ,
IntraFreqIdleMlbSwi IntraFreqIdleMlbSwi
tch(IntraFreqIdleMlb IntraFreqIdleMlbSwi
tch~5, tch,
Switch), None tch:Off,
UtranIdleMlbSwitch UtranIdleMlbSwitch,
UtranIdleMlbSwitch( UtranIdleMlbSwitch:
~6, MlbLoadInfoSwitch,
UtranIdleMlbSwitch) Off,
MlbLoadInfoSwitch InterFreqBlindMlbS
, MlbLoadInfoSwitch:
~7, witch,
MlbLoadInfoSwitch( Off,
InterFreqBlindMlbS PrbValMlbSwitch,
MlbLoadInfoSwitch) InterFreqBlindMlbS
witch~8, InterFreqIdleMlbSwi
, witch:Off,
PrbValMlbSwitch~9, tch
InterFreqBlindMlbS PrbValMlbSwitch:Of
InterFreqIdleMlbSwi
witch(InterFreqBlind f,
tch~10
MlbSwitch), InterFreqIdleMlbSwi
PrbValMlbSwitch(Pr tch:Off
bValMlbSwitch),
InterFreqIdleMlbSwi
tch(InterFreqIdleMlb
Switch)
 PdschSpsPcSwitch PdschSpsPcSwitch:
PdschSpsPcSwitch, PdschSpsPcSwitch,
~0, Off,
PhichInnerLoopPcS PhichInnerLoopPcS
PhichInnerLoopPcS PhichInnerLoopPcS
witch, witch,
witch~1, witch:Off,
PdcchPcSwitch, PdcchPcSwitch,
PdcchPcSwitch~2, PdcchPcSwitch:On,
EDlMaxTXPwrSwitc EDlMaxTXPwrSwitc
EDlMaxTXPwrSwitc None EDlMaxTXPwrSwitc
h, h,
h~3, h:Off,
BFModeUserPwrS BFModeUserPwrS
BFModeUserPwrS BFModeUserPwrS
witch, witch,
witch~4, witch:Off,
SigPowerIncreaseS SigPowerIncreaseS
SigPowerIncreaseS SigPowerIncreaseS
witch witch
witch~5 witch:Off
InnerLoopPuschSwi
tch(InnerLoopPusc
hSwitch),
PhSinrTarUpdateS
witch(PhSinrTarUpd
ateSwitch), CloseLoopSpsSwitc
CloseLoopSpsSwitc CloseLoopSpsSwitc
InnerLoopPucchSwi h:Off,
h~0, h,
tch(InnerLoopPucc InnerLoopPuschSwi
InnerLoopPuschSwi InnerLoopPuschSwi
hSwitch), tch:On,
tch~1, tch,
OiSinrTarUpdateSw PhSinrTarUpdateS
PhSinrTarUpdateS PhSinrTarUpdateS
itch(OiSinrTarUpdat witch:Off,
witch~2, witch,
eSwitch), InnerLoopPucchSwi
InnerLoopPucchSwi InnerLoopPucchSwi
PowerSavingSwitch tch:On,
tch~3, tch,
(PowerSavingSwitc OiSinrTarUpdateSw
OiSinrTarUpdateSw OiSinrTarUpdateSw
h), itch:Off,
itch~4, itch,
CloseLoopOptPUS PowerSavingSwitch
PowerSavingSwitch PowerSavingSwitch
CHSwitch(CloseLoo :Off,
~5, ,
pOptPUSCHSwitch) CloseLoopOptPUS
CloseLoopOptPUS CloseLoopOptPUS
, None CHSwitch:Off,
CHSwitch~6, CHSwitch,
PucchPcDtxSinrSwi PucchPcDtxSinrSwi
PucchPcDtxSinrSwi PucchPcDtxSinrSwi
tch(PucchPcDtxSinr tch:Off,
tch~7, tch,
Switch), PuschIoTCtrlSwitch
PuschIoTCtrlSwitch PuschIoTCtrlSwitch
PuschIoTCtrlSwitch :Off,
~8, SrsPcSwitch~9, , SrsPcSwitch,
(PuschIoTCtrlSwitc SrsPcSwitch:On,
NearPointUeOptPU NearPointUeOptPU
h), NearPointUeOptPU
SCHSwitch~10, SCHSwitch,
SrsPcSwitch(SrsPc SCHSwitch:Off,
PuschRsrpHighThd PuschRsrpHighThd
Switch), PuschRsrpHighThd
Switch~11, Switch,
NearPointUeOptPU Switch:Off,
OuterLoopPucchSw OuterLoopPucchSw
SCHSwitch(NearPo OuterLoopPucchSw
itch~12, itch,
intUeOptPUSCHSw itch:Off,
GroupPCForPucch GroupPCForPucch
itch), GroupPCForPucch
Switch~13 Switch
PuschRsrpHighThd Switch:Off
Switch(PuschRsrpH
ighThdSwitch),
OuterLoopPucchSw
itch(OuterLoopPucc
hSwitch),

BfSwitch BfSwitch~0 None BfSwitch BfSwitch:Off

ownSwitch),
FreqSelSwitch:Off,
NonGbrBundlingSw
ServiceDiffSwitch:O
itch(NonGbrBundlin FreqSelSwitch~0, FreqSelSwitch,
ff,
gSwitch), ServiceDiffSwitch~1 ServiceDiffSwitch,
SpsSchSwitch:Off,
EnAperiodicCqiRpt , SpsSchSwitch~2, SpsSchSwitch,
MBSFNShutDownS
Switch(EnAperiodic MBSFNShutDownS MBSFNShutDownS
witch:Off,
CqiRptSwitch), witch~3, witch,
NonGbrBundlingSw
DlMbrCtrlSwitch(Dl NonGbrBundlingSw NonGbrBundlingSw
itch:Off,
MbrCtrlSwitch), itch~4, itch,
EnAperiodicCqiRpt
MbrDlSchSwitch(M EnAperiodicCqiRpt EnAperiodicCqiRpt
Switch:Off,
brDlSchSwitch), Switch~5, Switch,
DlMbrCtrlSwitch:Off
UeAmbrDlSchSwitc DlMbrCtrlSwitch~6, DlMbrCtrlSwitch,
,
h(UeAmbrDlSchSwi MbrDlSchSwitch~7, MbrDlSchSwitch,
MbrDlSchSwitch:Off
tch), UeAmbrDlSchSwitc UeAmbrDlSchSwitc
,
EpfEnhancedSwitc h~8, h,
UeAmbrDlSchSwitc
h(EpfEnhancedSwit EpfEnhancedSwitc EpfEnhancedSwitc
h:Off,
ch), h~9, h,
EpfEnhancedSwitc
AperiodicCqiTrigOp AperiodicCqiTrigOp AperiodicCqiTrigOp
h:Off,
tSwitch(AperiodicC tSwitch~10, None tSwitch,
AperiodicCqiTrigOp
qiTrigOptSwitch), VoipTbsBasedMcsS VoipTbsBasedMcsS
tSwitch:Off,
VoipTbsBasedMcsS elSwitch~11, elSwitch,
VoipTbsBasedMcsS
elSwitch(VoipTbsBa PagingInterfRandS PagingInterfRandS
elSwitch:Off,
sedMcsSelSwitch), witch~12, witch,
PagingInterfRandS
PagingInterfRandS DlSingleUsrMcsOpt DlSingleUsrMcsOpt
witch:Off,
witch(PagingInterfR Switch~13, Switch,
DlSingleUsrMcsOpt
andSwitch), SubframeSchDiffSw SubframeSchDiffSw
Switch:Off,
DlSingleUsrMcsOpt itch~14, itch,
SubframeSchDiffSw
Switch(DlSingleUsr TailPackagePriSch TailPackagePriSch
itch:Off,
McsOptSwitch), Switch~15, Switch,
TailPackagePriSch
SubframeSchDiffSw UeSigMcsEnhance UeSigMcsEnhance
Switch:Off,
itch(SubframeSchDi Switch~16, Switch,
UeSigMcsEnhance
ffSwitch), FreqSelJudgeIgnor FreqSelJudgeIgnor
Switch:Off,
TailPackagePriSch DopplerSwitch~17, DopplerSwitch,
FreqSelJudgeIgnor
Switch(TailPackage SIB1InterfRandSwit SIB1InterfRandSwit
DopplerSwitch:Off,
PriSchSwitch), ch~18 ch
SIB1InterfRandSwit
UeSigMcsEnhance
ch:On
Switch(UeSigMcsE
 4, ImIcSwitch~5, Off, ImIcSwitch:Off,
UlIblerAdjustSwitch( PreAllocationSwitch
SmartPreAllocation SmartPreAllocation
UlIblerAdjustSwitch) , UlVmimoSwitch,
Switch~6, Switch:Off,
, TtiBundlingSwitch,
PuschDtxSwitch~7, PuschDtxSwitch:On
UlEnhancedFssSwit ImIcSwitch,
UlIblerAdjustSwitch ,
ch(UlEnhancedFss SmartPreAllocation
~8, UlIblerAdjustSwitch:
Switch), Switch,
UlEnhancedFssSwit Off,
UlEnhancedSrSchS PuschDtxSwitch,
ch~9, UlEnhancedFssSwit
witch(UlEnhancedS UlIblerAdjustSwitch,
UlEnhancedSrSchS ch:On,
rSchSwitch), UlEnhancedFssSwit
witch~10, UlEnhancedSrSchS
SchedulerCtrlPower ch,
SchedulerCtrlPower witch:Off,
Switch(SchedulerCt UlEnhancedSrSchS
Switch~11, SchedulerCtrlPower
rlPowerSwitch), witch,
UlIicsAlgoSwitch~1 Switch:Off,
UlIicsAlgoSwitch(UlI SchedulerCtrlPower
2, UlIicsAlgoSwitch:Of
icsAlgoSwitch), Switch,
UlMinGbrSwitch~13 f,
UlMinGbrSwitch(Ul UlIicsAlgoSwitch,
, UlMinGbrSwitch:Off
MinGbrSwitch), UlMinGbrSwitch,
UlMbrCtrlSwitch~14 ,
UlMbrCtrlSwitch(Ul UlMbrCtrlSwitch,
, UlMbrCtrlSwitch:Off
MbrCtrlSwitch), MbrUlSchSwitch,
MbrUlSchSwitch~1 ,
MbrUlSchSwitch(M None UeAmbrUlSchSwitc
5, MbrUlSchSwitch:Off
brUlSchSwitch), h,
UeAmbrUlSchSwitc ,
UeAmbrUlSchSwitc UlEnhancedDopple
h~16, UeAmbrUlSchSwitc
h(UeAmbrUlSchSwi rSwitch,
UlEnhancedDopple h:Off,
tch), UlRaUserSchOptS
rSwitch~17, UlEnhancedDopple
UlEnhancedDopple w,
UlRaUserSchOptS rSwitch:Off,
rSwitch(UlEnhance UlLast2RetransSch
w~18, UlRaUserSchOptS
dDopplerSwitch), OptSwitch,
UlLast2RetransSch w:Off,
UlRaUserSchOptS UlInterfFssSwitch,
OptSwitch~19, UlLast2RetransSch
w(UlRaUserSchOpt UlSmallRBSpectral
UlInterfFssSwitch~2 OptSwitch:Off,
Sw), EffOptSw,
0, UlInterfFssSwitch:O
UlLast2RetransSch PuschUsePucchRb
UlSmallRBSpectral ff,
OptSwitch(UlLast2 Switch,
EffOptSw~21, UlSmallRBSpectral
RetransSchOptSwit PuschDtxSchOptS
PuschUsePucchRb EffOptSw:Off,
ch), witch,
Switch~22, PuschUsePucchRb
UlInterfFssSwitch(U ULFSSAlgoSwitch,
PuschDtxSchOptS Switch:Off,
lInterfFssSwitch), PrachRbReuseSwit
witch~23, PuschDtxSchOptS
UlSmallRBSpectral ch,
ULFSSAlgoSwitch~ witch:Off,
EffOptSw(UlSmallR SrSchDataAdptSw,
24, ULFSSAlgoSwitch:

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

FreqPriorIFHOSwitc
h(FreqPriorIFHOSw
itch), FreqPriorIFHOSwitc FreqPriorIFHOSwitc FreqPriorIFHOSwitc
FreqPriorIFBlindHO h~0, h, h:Off,
Switch(FreqPriorIF FreqPriorIFBlindHO FreqPriorIFBlindHO FreqPriorIFBlindHO
BlindHOSwitch), Switch~1, Switch, Switch:On,
None
MlbBasedFreqPriH MlbBasedFreqPriH MlbBasedFreqPriH MlbBasedFreqPriH
oSwitch(MlbBasedF oSwitch~2, oSwitch, oSwitch:Off,
reqPriHoSwitch), A2BasedFreqPriHo A2BasedFreqPriHo A2BasedFreqPriHo
A2BasedFreqPriHo Switch~3 Switch Switch:Off
Switch(A2BasedFre
qPriHoSwitch)
MuBfSwitch(MuBfS
witch), MuBfSwitch:Off,
MuBfSwitch~0, MuBfSwitch,
TM9MuBfSwitch(T TM9MuBfSwitch:Off
TM9MuBfSwitch~1, None TM9MuBfSwitch,
M9MuBfSwitch), ,
EnhMubfSwitch~2 EnhMubfSwitch
EnhMubfSwitch(En EnhMubfSwitch:Off
hMubfSwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

ACBAR_SWITCH_
DYNAMIC(dynamic ACBAR_SWITCH_ ACBAR_SWITCH_
configuration), DYNAMIC~0, DYNAMIC,
ACBAR_SWITCH_
ACBAR_SWITCH_ ACBAR_SWITCH_ ACBAR_SWITCH_
None STATIC(static
STATIC(static STATIC~1, STATIC,
configuration)
configuration), ACBAR_SWITCH_ ACBAR_SWITCH_
ACBAR_SWITCH_ DISABLE~2 DISABLE
DISABLE(Disable)

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE ENABLE(Enable)
ENABLE(Enable) ENABLE~1

ADAPTIVE(Adaptiv
e scheduling), ADAPTIVE~0, JOINT(Joint
None ADAPTIVE, JOINT
JOINT(Joint JOINT~1 scheduling)
scheduling)

ADAPTIVE(Adaptiv
e scheduling), ADAPTIVE~0, JOINT(Joint
None ADAPTIVE, JOINT
JOINT(Joint JOINT~1 scheduling)
scheduling)
PucchIrcSwitch, PucchIrcSwitch~0, PucchIrcSwitch, PucchIrcSwitch:Off,
None
PrachIrcSwitch PrachIrcSwitch~1 PrachIrcSwitch PrachIrcSwitch:Off

DynDrxSwitch(Dyn
DrxSwitch), DynDrxSwitch~0, DynDrxSwitch, DynDrxSwitch:Off,
None
SmartDrxSwitch(S SmartDrxSwitch~1 SmartDrxSwitch SmartDrxSwitch:Off
martDrxSwitch)

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE DISABLE(Disable)
ENABLE(Enable) ENABLE~1
AvoidGeranInterfSw
itch(AvoidGeranInte
rfSwitch),
TddAvoidUpPTSInt AvoidGeranInterfSw AvoidGeranInterfSw AvoidGeranInterfSw
erfSwitch(TddAvoid itch~0, itch, itch:Off,
UpPTSInterfSwitch) TddAvoidUpPTSInt TddAvoidUpPTSInt TddAvoidUpPTSInt
, erfSwitch~1, erfSwitch, erfSwitch:Off,
AvoidPrachInterfSw AvoidPrachInterfSw AvoidPrachInterfSw AvoidPrachInterfSw
None
itch(AvoidPrachInte itch~2, itch, itch:Off,
rfSwitch), AvoidUtranInterfSwi AvoidUtranInterfSwi AvoidUtranInterfSwi
AvoidUtranInterfSwi tch~3, tch, tch:Off,
tch(AvoidUtranInterf IntraBandInterfMoni IntraBandInterfMoni IntraBandInterfMoni
Switch), torSwitch~4 torSwitch torSwitch:Off
IntraBandInterfMoni
torSwitch(IntraBand
InterfMonitorSwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off),
STATIC(Static), OFF~0, STATIC~1, OFF, STATIC,
None OFF(Off)
DYNAMIC(Dynamic DYNAMIC~2 DYNAMIC
)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

IntraDlCompSwitch(
IntraDlCompSwitch)
IntraDlCompSwitch IntraDlCompSwitch:
, IntraDlCompSwitch,
~0, Off,
InterDlCompDcsSwi InterDlCompDcsSwi
InterDlCompDcsSwi InterDlCompDcsSwi
tch(InterDlCompDc None tch,
tch~1, tch:Off,
sSwitch), InterDlCompCbfSwi
InterDlCompCbfSwi InterDlCompCbfSwi
InterDlCompCbfSwi tch
tch~2 tch:Off
tch(InterDlCompCbf
Switch)

MumimoPuschPsic
MumimoPuschPsic MumimoPuschPsic MumimoPuschPsic
Switch(MumimoPus None
Switch~0 Switch Switch:Off
chPsicSwitch)
InterFreqMlbBlindH
o(InterFreqMlbBlind
Ho), InterFreqMlbBlindH InterFreqMlbBlindH
InterRatMlbBlindHo o~0, InterFreqMlbBlindH o:Off,
(InterRatMlbBlindH InterRatMlbBlindHo o, InterRatMlbBlindHo:
o), ~1, InterRatMlbBlindHo, Off,
None
InterFreqMlbRedire InterFreqMlbRedire InterFreqMlbRedire InterFreqMlbRedire
ct(InterFreqMlbRedi ct~2, ct, ct:Off,
rect), InterRatMlbRedirect InterRatMlbRedirect InterRatMlbRedirect
InterRatMlbRedirect ~3 :Off
(InterRatMlbRedirec
t)
UlJointReceptionSw
itch(UlJointReceptio
nSwitch),
UlJointReceptionPh
aseIISwitch(UlJoint
ReceptionPhaseIIS
UlJointReceptionSw UlJointReceptionSw UlJointReceptionSw
witch),
itch~0, itch, itch:Off,
UlCompRollbackSw
UlJointReceptionPh UlJointReceptionPh UlJointReceptionPh
itch(UlCompRollbac
aseIISwitch~1, aseIISwitch, aseIISwitch:Off,
kSwitch),
UlCompRollbackSw UlCompRollbackSw UlCompRollbackSw
UlJointReception3C
itch~2, itch, itch:On,
ellSwitch(UlJointRe
UlJointReception3C UlJointReception3C UlJointReception3C
ception3CellSwitch) None
ellSwitch~3, ellSwitch, ellSwitch:Off,
,
UlHetnetJointRecep UlHetnetJointRecep UlHetnetJointRecep
UlHetnetJointRecep
tionSwitch~4, tionSwitch, tionSwitch:Off,
tionSwitch(UlHetnet
UlHetnetCompMan UlHetnetCompMan UlHetnetCompMan
JointReceptionSwit
ualNcellCfgSw~5, ualNcellCfgSw, ualNcellCfgSw:Off,
ch),
UlHetnetCompOnUl UlHetnetCompOnUl UlHetnetCompOnUl
UlHetnetCompMan
RsrpSw~6 RsrpSw RsrpSw:Off
ualNcellCfgSw(UlH
etnetCompManualN
cellCfgSw),
UlHetnetCompOnUl
RsrpSw(UlHetnetC
ompOnUlRsrpSw)

CrossPolaCalibratio
CrossPolaCalibratio CrossPolaCalibratio CrossPolaCalibratio
nSwitch(CrossPola None
nSwitch~0 nSwitch nSwitch:Off
CalibrationSwitch)

GLDynSpectrumSh
areSwitch(GLDynS GLDynSpectrumSh GLDynSpectrumSh GLDynSpectrumSh
None
pectrumShareSwitc areSwitch~0 areSwitch areSwitch:Off
h)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
MrcIrcAdptSwitch(M
rcIrcAdptSwitch), MrcIrcAdptSwitch:O
MrcIrcAdptSwitch~0 MrcIrcAdptSwitch,
SmartIrcSwitch(Sm n,
, SmartIrcSwitch~1, SmartIrcSwitch,
artIrcSwitch), None SmartIrcSwitch:Off,
MrcIrcAdaptivefor2 MrcIrcAdaptivefor2
MrcIrcAdaptivefor2 MrcIrcAdaptivefor2
R~2 R
R(MrcIrcAdaptivefor R:Off
2R)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

SfnPdcchDcsSwitch
(SFNPDCCHDCSS
WITCH),
SfnUll2SelectiveRc
vSwitch(SfnUll2Sel
ectiveRcvSwitch), SfnPdcchDcsSwitch SfnPdcchDcsSwitch SfnPdcchDcsSwitch
SfnPdcchSdmaSwit ~0, , :Off,
ch(SFNPDCCHSD SfnUll2SelectiveRc SfnUll2SelectiveRc SfnUll2SelectiveRc
MASWITCH), vSwitch~1, vSwitch, vSwitch:Off,
SfnPucchAckSdma SfnPdcchSdmaSwit SfnPdcchSdmaSwit SfnPdcchSdmaSwit
Switch(SFNPUCCH ch~2, ch, ch:Off,
ACKSDMASWITCH SfnPucchAckSdma SfnPucchAckSdma SfnPucchAckSdma
), Switch~3, Switch, Switch:Off,
SuperCombCellSwit SuperCombCellSwit None SuperCombCellSwit SuperCombCellSwit
ch(SuperCombCell ch~4, ch, ch:Off,
Switch), SfnDl2LoadLevelAd SfnDl2LoadLevelAd SfnDl2LoadLevelAd
SfnDl2LoadLevelAd ptSwitch~5, ptSwitch, ptSwitch:Off,
ptSwitch(SfnDl2Loa SfnDlSchAttriAdjsS SfnDlSchAttriAdjsS SfnDlSchAttriAdjsS
dLevelAdptSwitch), witch~6, witch, witch:Off,
SfnDlSchAttriAdjsS SfnCbfSwitch~7, SfnCbfSwitch, SfnCbfSwitch:Off,
witch(SfnDlSchAttri SfnVoLteDlJSchSwi SfnVoLteDlJSchSwi SfnVoLteDlJSchSwi
AdjsSwitch), tch~8 tch tch:Off
SfnCbfSwitch(SfnC
bfSwitch),
SfnVoLteDlJSchSwi
tch(SfnVoLteDlJSch
Switch)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

TM9Switch(TM9Swi
TM9Switch~0 None TM9Switch TM9Switch:Off
tch)
OFF(OFF),
ECO_BASED(ECO OFF~0,
OFF, ECO_BASED,
_BASED), ECO_BASED~1, None OFF(OFF)
ENB_BASED
ENB_BASED(ENB_ ENB_BASED~2
BASED)

AntRsPwrSwitch(An AntRsPwrSwitch:Of
AntRsPwrSwitch~0 None AntRsPwrSwitch
tRsPwrSwitch) f
FixedMeasObjIDSw
itch(FixedMeasObjI FixedMeasObjIDSw FixedMeasObjIDSw FixedMeasObjIDSw
DSwitch), itch~0, itch, itch:Off,
None
VoipMeasFreqPriS VoipMeasFreqPriS VoipMeasFreqPriS VoipMeasFreqPriS
witch(VoipMeasFre witch~1 witch witch:Off
qPriSwitch)
TddAckFbModeCfg
OptSwitch(TddAckF TddAckFbModeCfg TddAckFbModeCfg TddAckFbModeCfg
None
bModeCfgOptSwitc OptSwitch~0 OptSwitch OptSwitch:Off
h)
HANDOVERIMME
DIATELY(HANDOV
ERIMMEDIATELY), HANDOVERIMME HANDOVERIMME
BASEDONSIGNAL DIATELY~0, DIATELY,
HANDOVERIMME
STRENGTH(BASE BASEDONSIGNAL BASEDONSIGNAL
None DIATELY(HANDOV
DONSIGNALSTRE STRENGTH~1, STRENGTH,
ERIMMEDIATELY)
NGTH), BASEDONFREQP BASEDONFREQP
BASEDONFREQP RIORITY~2 RIORITY
RIORITY(BASEDO
NFREQPRIORITY)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

AbnUeSchSwitch(A AbnUeSchSwitch:O
AbnUeSchSwitch~0 None AbnUeSchSwitch
bnUeSchSwitch) ff

Ssrd8T8RAlgoSwitc
Ssrd8T8RAlgoSwitc Ssrd8T8RAlgoSwitc Ssrd8T8RAlgoSwitc
h(Ssrd8T8RAlgoSw None
h~0 h h:Off
itch)
IntraBaseBandSwit
ch(IntraBaseBandS
witch), IntraBaseBandSwit IntraBaseBandSwit IntraBaseBandSwit
InterBaseBandSwit ch~0, ch, ch:Off,
ch(InterBaseBandS InterBaseBandSwit InterBaseBandSwit InterBaseBandSwit
witch), ch~1, ch, ch:Off,
None
ComCoverUlComp ComCoverUlComp ComCoverUlComp ComCoverUlComp
Switch(ComCoverU Switch~2, Switch, Switch:Off,
lCompSwitch), SfnUplinkComp3Ce SfnUplinkComp3Ce SfnUplinkComp3Ce
SfnUplinkComp3Ce llSwitch~3 llSwitch llSwitch:Off
llSwitch(SfnUplinkC
omp3CellSwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OutOfBandRelayS
OutOfBandRelayS OutOfBandRelayS OutOfBandRelayS
witch(OutOfBandRe None
witch~0 witch witch:Off
laySwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

CqiReliableSwitch( CqiReliableSwitch~ CqiReliableSwitch:

None CqiReliableSwitch
CqiReliableSwitch) 0 Off
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
DYNAMIC_FOR_M
O(DYNAMIC_FOR_ DYNAMIC_FOR_M DYNAMIC_FOR_M DYNAMIC_FOR_M
MO), O~0, O, O:On,
None
DYNAMIC_FOR_S DYNAMIC_FOR_S DYNAMIC_FOR_S DYNAMIC_FOR_S
SAC(DYNAMIC_FO SAC~1 SAC SAC:Off
R_SSAC)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

InterFreqBackoffSw
InterFreqBackoffSw InterFreqBackoffSw InterFreqBackoffSw
itch(InterFreqBacko None
itch~0 itch itch:Off
ffSwitch)
SrvBasedInterFreq
SrvBasedInterFreq SrvBasedInterFreq SrvBasedInterFreq
HoSw(SrvBasedInt None
HoSw~0 HoSw HoSw:On
erFreqHoSw)
INTRA_RAT_NCEL
L_CLASS_SW(INT
RA_RAT_NCELL_C
INTRA_RAT_NCEL
LASS_SW), INTRA_RAT_NCEL
INTRA_RAT_NCEL L_CLASS_SW:Off,
NCELL_CLASS_H L_CLASS_SW~0,
L_CLASS_SW, NCELL_CLASS_H
O_POLICY_SW(NC NCELL_CLASS_H
NCELL_CLASS_H O_POLICY_SW:Off
ELL_CLASS_HO_P O_POLICY_SW~1, None
O_POLICY_SW, ,
OLICY_SW), NCELL_CLASS_P
NCELL_CLASS_P NCELL_CLASS_P
NCELL_CLASS_P CI_CONFLICT_SW
CI_CONFLICT_SW CI_CONFLICT_SW
CI_CONFLICT_SW ~2
:Off
(NCELL_CLASS_P
CI_CONFLICT_SW
)
IntraAnrPolicySwitc
h(INTRA_ANR_PO
IntraAnrPolicySwitc IntraAnrPolicySwitc IntraAnrPolicySwitc
LICY_SWITCH),
h~0, h, h:Off,
PciConflictDetectPo None
PciConflictDetectPo PciConflictDetectPo PciConflictDetectPo
licySwitch(PCI_CO
licySwitch~1 licySwitch licySwitch:Off
NFLICT_DETECT_
POLICY_SWITCH)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off),
OFF~0, ABS~1 None OFF, ABS OFF(Off)
ABS(ABS)
UlCamcSw(UlCamc
UlCamcSw~0 None UlCamcSw UlCamcSw:Off
Sw)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

InterfHighSpeedSW
(InterfHighSpeedS
InterfHighSpeedSW InterfHighSpeedSW InterfHighSpeedSW
W),
~0, , :Off,
HighSpeedUserRed None
HighSpeedUserRed HighSpeedUserRed HighSpeedUserRed
irectSwitch(HighSp
irectSwitch~1 irectSwitch irectSwitch:Off
eedUserRedirectSw
itch)
VideoRateAdaptSwi
tch(VideoRateAdapt VideoRateAdaptSwi VideoRateAdaptSwi VideoRateAdaptSwi
Switch), tch~0, tch, tch:Off,
None
DownLoadRateLimi DownLoadRateLimi DownLoadRateLimi DownLoadRateLimi
tSwitch(DownLoad tSwitch~1 tSwitch tSwitch:Off
RateLimitSwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)
Ul1R1RJRSwitch(Ul Ul1R1RJRSwitch:O
Ul1R1RJRSwitch~0
1R1RJRSwitch), ff,
,
Ul1R2RJRSwitch(Ul Ul1R2RJRSwitch:O
Ul1R2RJRSwitch~1 Ul1R1RJRSwitch,
1R2RJRSwitch), ff,
, Ul1R2RJRSwitch,
Ul2R8RJRSwitch(Ul Ul2R8RJRSwitch:O
Ul2R8RJRSwitch~2 None Ul2R8RJRSwitch,
2R8RJRSwitch), ff,
, Ul4R8RJRSwitch,
Ul4R8RJRSwitch(Ul Ul4R8RJRSwitch:O
Ul4R8RJRSwitch~3 Ul8R8RJRSwitch
4R8RJRSwitch), ff,
,
Ul8R8RJRSwitch(Ul Ul8R8RJRSwitch:O
Ul8R8RJRSwitch~4
8R8RJRSwitch) ff

VamPhaseShiftAlgo
VamPhaseShiftAlgo VamPhaseShiftAlgo VamPhaseShiftAlgo
Switch(VamPhaseS None
Switch~0 Switch Switch:Off
hiftAlgoSwitch)
UlHeavyTrafficMlbS
UlHeavyTrafficMlbS UlHeavyTrafficMlbS UlHeavyTrafficMlbS
witch(UlHeavyTraffi None
witch~0 witch witch:Off
cMlbSwitch)

GSM_MEAS_DEL_
GSM_MEAS_DEL_ GSM_MEAS_DEL_
INTERFREQ_SW( GSM_MEAS_DEL_
INTERFREQ_SW~ None INTERFREQ_SW:
Gsm Meas Del INTERFREQ_SW
0 Off
Interfreq Switch)

0~255 N/A None 0~255 None

MODE1(DL band
division scheme
No.1), MODE2(DL
band division
MODE1~0,
scheme No.2), INVALID(Invalid DL
MODE2~1, MODE1, MODE2,
MODE3(DL band None band division
MODE3~2, MODE3, INVALID
division scheme scheme)
INVALID~255
No.3),
INVALID(Invalid DL
band division
scheme)

-5~15 N/A dB -5~15 1

0~97 N/A None -140~-43 38

0~255 N/A None 0~255 None

-150~150 N/A 0.1dB -15~15 -30

0~255 N/A None 0~255 None

PA_NEG6(-6dB),
PA_NEG4DOT77(-
4.77dB), PA_NEG6~0, PA_NEG6,
PA_NEG3(-3dB), PA_NEG4DOT77~1 PA_NEG4DOT77,
PA_NEG1DOT77(- , PA_NEG3~2, PA_NEG3,
dB PA_NEG6(-6dB)
1.77dB), PA_NEG1DOT77~3 PA_NEG1DOT77,
PA_0(0dB), , PA_0~4, PA_1~5, PA_0, PA_1, PA_2,
PA_1(1dB), PA_2~6, PA_3~7 PA_3
PA_2(2dB),
PA_3(3dB)
PA_NEG6(-6dB),
PA_NEG4DOT77(-
4.77dB), PA_NEG6~0, PA_NEG6,
PA_NEG3(-3dB), PA_NEG4DOT77~1 PA_NEG4DOT77,
PA_NEG1DOT77(- , PA_NEG3~2, PA_NEG3, PA_NEG1DOT77(-
dB
1.77dB), PA_NEG1DOT77~3 PA_NEG1DOT77, 1.77dB)
PA_0(0dB), , PA_0~4, PA_1~5, PA_0, PA_1, PA_2,
PA_1(1dB), PA_2~6, PA_3~7 PA_3
PA_2(2dB),
PA_3(3dB)

0~255 N/A None 0~255 None

-150~150 N/A 0.1dB -15~15 0

0~255 N/A None 0~255 None

DLSCH_PRI_TYPE DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_EPF(EPF), _EPF~0, _EPF,
DLSCH_PRI_TYPE DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_PF(PF), _PF~1, _PF, DLSCH_PRI_TYPE
None
DLSCH_PRI_TYPE DLSCH_PRI_TYPE DLSCH_PRI_TYPE _EPF(EPF)
_MAX_CI(MAX C/I), _MAX_CI~2, _MAX_CI,
DLSCH_PRI_TYPE DLSCH_PRI_TYPE DLSCH_PRI_TYPE
_RR(RR) _RR~3 _RR

0~100 N/A % 0~100 0

SW_MAX_SM_RA SW_MAX_SM_RA SW_MAX_SM_RA
NK_1(Rank1), NK_1~0, NK_1,
SW_MAX_SM_RA SW_MAX_SM_RA SW_MAX_SM_RA SW_MAX_SM_RA
None
NK_2(Rank2), NK_2~1, NK_2, NK_2(Rank2)
SW_MAX_SM_RA SW_MAX_SM_RA SW_MAX_SM_RA
NK_4(Rank4) NK_4~2 NK_4

BASIC_SCHEDUL
BASIC_SCHEDUL
E(Basic Schedule), BASIC_SCHEDUL
E~0, BASIC_SCHEDUL
DIFF_SCHEDULE( None E,
DIFF_SCHEDULE~ E(Basic Schedule)
differentiation DIFF_SCHEDULE
1
schedule)
0~50 N/A % 0~50 0

EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT

OR_1(1), OR_1~0, OR_1,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT01(0.01), OR_0DOT01~1, OR_0DOT01,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_0DOT5(0.5), OR_0DOT5~2, OR_0DOT5, EPF_CAPC_FACT
None
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT OR_1(1)
OR_2(2), OR_2~3, OR_2,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_3(3), OR_3~4, OR_3,
EPF_CAPC_FACT EPF_CAPC_FACT EPF_CAPC_FACT
OR_4(4) OR_4~5 OR_4
0~100 N/A % 0~100 10

ALL_EDGE_USER( ALL_EDGE_USER
ALL_EDGE_USER,
All Edge User), ~0, ALL_EDGE_USER(
None PART_EDGE_USE
PART_EDGE_USE PART_EDGE_USE All Edge User)
R
R(Part Edge User) R~1

EDGE_USER_NO_
EDGE_USER_NO_ EDGE_USER_NO_
PRIO(Edge User EDGE_USER_NO_
PRIO~0, PRIO,
No Prio), None PRIO(Edge User
EDGE_USER_PRI EDGE_USER_PRI
EDGE_USER_PRI No Prio)
O~1 O
O(Edge User Prio)
ROUND_DOWN(R
ound Down),
ROUND_DOWN~0, ROUND_DOWN,
ROUND_UP(Round ROUND_DOWN(R
ROUND_UP~1, None ROUND_UP,
Up), ound Down)
ADAPTIVE~2 ADAPTIVE
ADAPTIVE(Adaptiv
e)

1~6 N/A None 1~6 5

0~10 N/A None 0~1, step:0.1 8

0~100 N/A ms 0~100 60

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

FROMSCC(FROM
SCC), FROMSCC~0, FROMSCC, FROMSCC(FROM
None
FROMPCC(FROM FROMPCC~1 FROMPCC SCC)
PCC)
ms20(20ms),
ms40(40ms), ms20~0, ms40~1, ms20, ms40,
None ms20(20ms)
ADAPTIVE(ADAPTI ADAPTIVE~2 ADAPTIVE
VE)
SINGLEUSER_ST
RATEGY(Single
User Strategy), SINGLEUSER_ST SINGLEUSER_ST
MULTIUSER_STRA RATEGY~0, RATEGY,
TEGY(Multiple User MULTIUSER_STRA MULTIUSER_STRA SINGLEUSER_ST
Strategy), TEGY~1, None TEGY, RATEGY(Single
MULTIUSR_LOWM MULTIUSR_LOWM MULTIUSR_LOWM User Strategy)
CSLIMIT_STRATE CSLIMIT_STRATE CSLIMIT_STRATE
GY(Multiple User GY~2 GY
Lower MCS Limited
Strategy)
DetectRank2AdjSwi
tch(DetectRank2Adj DetectRank2AdjSwi DetectRank2AdjSwi DetectRank2AdjSwi
Switch), tch~0, tch, tch:Off,
None
DetectRank1AdjSwi DetectRank1AdjSwi DetectRank1AdjSwi DetectRank1AdjSwi
tch(DetectRank1Adj tch~1 tch tch:Off
Switch)

SubFrame0(SubFra
me0),
SubFrame1(SubFra
me1),
SubFrame2(SubFra
me2), SubFrame0~0, SubFrame0, SubFrame0:Off,
SubFrame3(SubFra SubFrame1~1, SubFrame1, SubFrame1:Off,
me3), SubFrame2~2, SubFrame2, SubFrame2:Off,
SubFrame4(SubFra SubFrame3~3, SubFrame3, SubFrame3:Off,
me4), SubFrame4~4, SubFrame4, SubFrame4:Off,
None
SubFrame5(SubFra SubFrame5~5, SubFrame5, SubFrame5:Off,
me5), SubFrame6~6, SubFrame6, SubFrame6:Off,
SubFrame6(SubFra SubFrame7~7, SubFrame7, SubFrame7:Off,
me6), SubFrame8~8, SubFrame8, SubFrame8:Off,
SubFrame7(SubFra SubFrame9~9 SubFrame9 SubFrame9:Off
me7),
SubFrame8(SubFra
me8),
SubFrame9(SubFra
me9)
SCH(Schedule),
NSCH(Not SCH~0, NSCH~1 None SCH, NSCH SCH(Schedule)
Schedule)

0~1000000 N/A bit 0~1000000 0

0~10000 N/A None 0~10000 10000

MOD3(3), MOD3~0, MOD4~1, MOD3, MOD4,

None MOD6(6)
MOD4(4), MOD6(6) MOD6~2 MOD6
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

6~120 N/A None 6~120 15

 0.010~0.930,
10~930 N/A None 117
step:0.001

0~1000 N/A None 0~10, step:0.01 10

UnCfgCsiRsUESch UnCfgCsiRsUESch UnCfgCsiRsUESch UnCfgCsiRsUESch
None
Switch Switch~0 Switch Switch:Off

2~1800 N/A s 2~1800 30

1~10 N/A s 1~10 10

DlVoIPLoadBasedS
chSwitch(DlVoIPLo DlVoIPLoadBasedS DlVoIPLoadBasedS DlVoIPLoadBasedS
None
adBasedSchSwitch chSwitch~0 chSwitch chSwitch:Off
)
 5ms~0, 10ms~1,
5ms, 10ms, 20ms, 5ms, 10ms, 20ms,
20ms~2, 40ms~3,
40ms, 80ms, None 40ms, 80ms, 5ms
80ms~4, 160ms~5,
160ms, inf 160ms, inf
inf~6

0~100 N/A % 0~100 45

0~100 N/A % 0~100 30

-25~25 N/A dB -25~25 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

-1200~400 N/A 0.1dBm/MHz -1200~400 -850

-1200~400 N/A 0.1dBm/MHz -1200~400 -900

0~32 characters N/A None 0~32 None

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON None

-1200~400 N/A 0.1dBm/MHz -1200~400 None

CQI_PERIOD_BAS
ED(CQI_PERIOD_
CQI_PERIOD_BAS CQI_PERIOD_BAS
BASED), CQI_PERIOD_BAS
ED~0, ED,
CQI_REPORTINTE None ED(CQI_PERIOD_
CQI_REPORTINTE CQI_REPORTINTE
RVAL_BASED(CQI BASED)
RVAL_BASED~1 RVAL_BASED
_REPORTINTERVA
L_BASED)

0~255 N/A None 0~255 None

1~100 N/A % 1~100 60
1~100 N/A % 1~100 75

0~50 N/A % 0~50 8

1~50 N/A % 1~50 15

1~100 N/A % 1~100 15

1~30 N/A s 1~30 10

0~100 N/A % 0~100 0

PRB_ONLY(PrbMo
de), PRB_ONLY~0, PRB_ONLY,
UE_NUMBER_ONL UE_NUMBER_ONL UE_NUMBER_ONL
PRB_ONLY(PrbMo
Y(UeNumMode), Y~1, None Y,
de)
PRB_OR_UE_NUM PRB_OR_UE_NUM PRB_OR_UE_NUM
BER(PrbOrUeNum BER~2 BER
Mode)

1~10000 N/A None 1~10000 100

0~10000 N/A None 0~10000 20

1~20 N/A None 1~20 5

0~100 N/A % 0~100 2

NON_TRIGGERED
(NON_TRIGGERE NON_TRIGGERED NON_TRIGGERED
NON_TRIGGERED
D), ~0, None (NON_TRIGGERE
, UENUMBASED
UENUMBASED(UE UENUMBASED~1 D)
NUMBASED)
NON_SHARING(N
ON_SHARING), NON_SHARING~0, NON_SHARING, NON_SHARING(N
None
SHARING(SHARIN SHARING~1 SHARING ON_SHARING)
G)

0~100 N/A % 0~100 15

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

Proportion(Proporti
Proportion~0 None Proportion Proportion:Off
on)
0~10000 N/A None 0~10000 0
0~10000 N/A None 0~10000 0
SynchronizedUE(Sy
nchronizedUE),
SynchronizedUE~0, SynchronizedUE:O
IdleUE(IdleUE), SynchronizedUE,
IdleUE~1, n, IdleUE:Off,
PrbMlbSynchronize IdleUE,
PrbMlbSynchronize None PrbMlbSynchronize
dUE(PrbMlbSynchr PrbMlbSynchronize
dUE~2, dUE:On,
onizedUE), dUE, PrbMlbIdleUE
PrbMlbIdleUE~3 PrbMlbIdleUE:Off
PrbMlbIdleUE(PrbM
lbIdleUE)

1~10000 N/A None 1~10000 100

1~10000 N/A None 1~10000 150

5~30 N/A s 5~30 30

5~30 N/A s 5~30 30
FAIRSTRATEGY(F
FAIRSTRATEGY~0,
airStrategy), FAIRSTRATEGY, FAIRSTRATEGY(F
PRIORITYBASED~ None
PRIORITYBASED( PRIORITYBASED airStrategy)
1
PriorityBased)
ADAPTIVE(Adaptiv ADAPTIVE~0, ADAPTIVE(Adaptiv
None ADAPTIVE, ALL
e), ALL(All) ALL~1 e)
0~10000 N/A None 0~10000 0

LOADINFOFREQ(L
OADINFOFREQ), LOADINFOFREQ~ LOADINFOFREQ, LOADINFOFREQ(L
None
ALLFREQ(ALLFRE 0, ALLFREQ~1 ALLFREQ OADINFOFREQ)
Q)
PRBRATIOHIGHM
ODE(PRBRATIOHI PRBRATIOHIGHM PRBRATIOHIGHM
PRBRATIOHIGHM
GHMODE), ODE~0, ODE,
None ODE(PRBRATIOHI
PRBRATIOLOWMO PRBRATIOLOWMO PRBRATIOLOWMO
GHMODE)
DE(PRBRATIOLO DE~1 DE
WMODE)

0~50 N/A % 0~50 2

PRB_USAGE(PRB
_USAGE),
PRB_VALUATION_
PRB_USAGE~0, PRB_USAGE,
WITH_CTRL(PRB_
PRB_VALUATION_ PRB_VALUATION_
VALUATION_WITH PRB_USAGE(PRB
WITH_CTRL~1, None WITH_CTRL,
_CTRL), _USAGE)
PRB_VALUATION_ PRB_VALUATION_
PRB_VALUATION_
NO_CTRL~2 NO_CTRL
NO_CTRL(PRB_VA
LUATION_NO_CTR
L)
0~3600 N/A s 0~3600 120
ONLY_STRONGES
T_CELL(Only Try ONLY_STRONGES
ONLY_STRONGES PERMIT_NON_ST
Strongest Cell), T_CELL~0,
T_CELL, RONGEST_CELL(
PERMIT_NON_ST PERMIT_NON_ST None
PERMIT_NON_ST Permit Trying Non-
RONGEST_CELL( RONGEST_CELL~
RONGEST_CELL Strongest Cell)
Permit Trying Non- 1
Strongest Cell)

IRAT_PRB_ONLY(
PRB Usage),
IRAT_PRB_ONLY~
IRAT_UE_NUMBE IRAT_PRB_ONLY,
0,
R_ONLY(UE IRAT_UE_NUMBE
IRAT_UE_NUMBE IRAT_PRB_ONLY(
Number), None R_ONLY,
R_ONLY~1, PRB Usage)
IRAT_PRB_OR_UE IRAT_PRB_OR_UE
IRAT_PRB_OR_UE
_NUMBER(PRB _NUMBER
_NUMBER~2
Usage or UE
Number)
1~10000 N/A None 1~10000 150

1~127 N/A None 1~127 1

0~127 N/A None 0~127 4

0~127 N/A None 0~127 4

PrbUsage(PrbUsag
PrbUsage~0 None PrbUsage PrbUsage:Off
e)
0~100 N/A % 0~100 0
0~10000 N/A None 0~10000 0

1~100 N/A None 0.1~10, step:0.1 10

1~60 N/A s 1~60 5

0~255 N/A None 0~255 None

UsUeGuaranteeSwi
tch(UsUeGuarantee
Switch),
UsHoSwitch(UsHoS
UsUeGuaranteeSwi
witch), UsUeGuaranteeSwi
tch:Off,
UsCellReselSwitch( tch~0,
UsUeGuaranteeSwi UsHoSwitch:Off,
UsCellReselSwitch) UsHoSwitch~1,
tch, UsHoSwitch, UsCellReselSwitch:
, UsCellReselSwitch
UsCellReselSwitch, Off,
UsUePuschPcPriori ~2,
UsUePuschPcPriori UsUePuschPcPriori
tySwitch(UsUePusc UsUePuschPcPriori
tySwitch, tySwitch:Off,
hPcPrioritySwitch), tySwitch~3,
None DlUsVoIPCqiAdjOpt DlUsVoIPCqiAdjOpt
DlUsVoIPCqiAdjOpt DlUsVoIPCqiAdjOpt
Switch, Switch:Off,
Switch(DlUsVoIPCq Switch~4,
UsCellNotDriveNsS UsCellNotDriveNsS
iAdjOptSwitch), UsCellNotDriveNsS
witch, witch:Off,
UsCellNotDriveNsS witch~5,
NsRbRestrictSwitch NsRbRestrictSwitch
witch(UsCellNotDriv NsRbRestrictSwitch
, UsCtrlDRXSwitch :Off,
eNsSwitch), ~6,
UsCtrlDRXSwitch:O
NsRbRestrictSwitch UsCtrlDRXSwitch~7
ff
(NsRbRestrictSwitc
h),
UsCtrlDRXSwitch(U
sCtrlDRXSwitch)

1~40 N/A ms 1~40 5

1~40 N/A ms 1~40 1

45~1500 N/A byte 45~1500 80

45~1500 N/A byte 45~1500 80

0~60000 N/A ms 0~60000 1500

0~60000 N/A ms 0~60000 1500

0~100 N/A % 0~100 5

0~10000 N/A None 0~10000 5

0~20 N/A dB 0~20 0

0~20 N/A dBm 0~20 0

0~255 N/A None 0~255 255

1~360 N/A min 1~360 15

3~3600 N/A s 3~3600 60

-141~-43 N/A dBm -141~-43 -106

-40~-6 N/A 0.5dB -20~-3 -24

0~255 N/A None 0~255 255

0~255 N/A None 0~255 255

DB_6_P_A(-6 dB),
DB_4DOT77_P_A(- DB_6_P_A~0, DB_6_P_A,
4.77 dB), DB_4DOT77_P_A~ DB_4DOT77_P_A,
DB_3_P_A(-3 dB), 1, DB_3_P_A~2, DB_3_P_A,
DB_1DOT77_P_A(- DB_1DOT77_P_A~ DB_1DOT77_P_A,
None DB_6_P_A(-6 dB)
1.77 dB), 3, DB0_P_A~4, DB0_P_A,
DB0_P_A(0 dB), DB1_P_A~5, DB1_P_A,
DB1_P_A(1 dB), DB2_P_A~6, DB2_P_A,
DB2_P_A(2 dB), DB3_P_A~7 DB3_P_A
DB3_P_A(3 dB)
0~20 N/A dB 0~20 0

10~90 N/A % 10~90 50

1~21600 N/A s 1~21600 60

0~12500 N/A kB/s 0~12500 0
0~12500 N/A kB/s 0~12500 0

0~10 N/A 0.5dB 0~5 0

0~255 N/A None 0~255 None

CONGREG_LV4, CONGREG_LV4~2, CONGREG_LV4,

None CONGREG_LV4
CONGREG_LV8 CONGREG_LV8~3 CONGREG_LV8

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

1~100 N/A 0.5dB 1~50 40
1~4 N/A None 1~4 1

0~100 N/A % 0~100 0

OFF(Off), ON(On),
OFF~0, ON~1,
ECFIADAPTIONON OFF, ON,
ECFIADAPTIONON None ON(On)
(Enhanced CFI ECFIADAPTIONON
~2
Adaption On)
1~100 N/A % 1~100 100

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

AVERAGE(AVERA
GE),
AVERAGE~0, AVERAGE,
MINUS_3DB_FIXE
MINUS_3DB_FIXE MINUS_3DB_FIXE
D(MINUS_3DB_FIX AVERAGE(AVERA
D~1, None D,
ED), GE)
MINUS_6DB_FIXE MINUS_6DB_FIXE
MINUS_6DB_FIXE
D~2 D
D(MINUS_6DB_FIX
ED)
STRATEGYBASED
ONCAPACITY(Cap
acity-based STRATEGYBASED STRATEGYBASED STRATEGYBASED
Selection Strategy), ONCAPACITY~1, ONCAPACITY, ONCAPACITY(Cap
None
STRATEGYBASED STRATEGYBASED STRATEGYBASED acity-based
ONCOVERAGE(Co ONCOVERAGE~2 ONCOVERAGE Selection Strategy)
verage-based
Selection Strategy)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

75~120 N/A None 0.75~1.2, step:0.01 75

1(1), 2(2), 3(3) 1~1, 2~2, 3~3 None 1, 2, 3 3(3)
STRATEGYBASED
ONCOVERAGE(Co
verage-based STRATEGYBASED STRATEGYBASED STRATEGYBASED
Selection Strategy), ONCOVERAGE~1, ONCOVERAGE, ONCOVERAGE(Co
None
STRATEGYBASED STRATEGYBASED STRATEGYBASED verage-based
ONCAPACITY(Cap ONCAPACITY~2 ONCAPACITY Selection Strategy)
acity-based
Selection Strategy)
0~1 N/A None 0~1 1
0~100 N/A 0.5dB 0~50 24
ReserveCommonC
CESwitch(Reserve ReserveCommonC ReserveCommonC ReserveCommonC
None
CommonCCESwitc CESwitch~0 CESwitch CESwitch:Off
h)

1_2(1:2), 1_1(1:1), 1_2~0, 1_1~1,

2_1(2:1), 3_1(3:1), 2_1~2, 3_1~3,
1_2, 1_1, 2_1, 3_1,
4_1(4:1), 5_1(5:1), 4_1~4, 5_1~5,
None 4_1, 5_1, 6_1, 7_1, 1_2(1:2)
6_1(6:1), 7_1(7:1), 6_1~6, 7_1~7,
8_1, 9_1, 10_1
8_1(8:1), 9_1(9:1), 8_1~8, 9_1~9,
10_1(10:1) 10_1~10
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~1000 N/A None 0~1, step:0.001 15

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

0~50 N/A None 0~50 10
FALSE(FALSE),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(FALSE)
TRUE(TRUE)
SriAdaptiveHoldFor
VoIPSW(SriAdaptiv SriAdaptiveHoldFor SriAdaptiveHoldFor
SriAdaptiveHoldFor
eHoldForVoIPSW), VoIPSW~0, VoIPSW:Off,
None VoIPSW,
SriPeriodCfgOptSW SriPeriodCfgOptSW SriPeriodCfgOptSW
SriPeriodCfgOptSW
(SriPeriodCfgOptS ~1 :Off
W)

0~255 N/A None 0~255 None

0~10800 N/A None 0~10800 400

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

BasedA3EdgeUser
BasedA3EdgeUser BasedA3EdgeUser BasedA3EdgeUser
Switch(BasedA3Ed None
Switch~0 Switch Switch:Off
geUserSwitch)
-30~30 N/A 0.5dB -15~15 -13

1~1000000 N/A kbps 1~1000000 512

1~1000000 N/A kbps 1~1000000 1024

1~1000000 N/A kbps 1~1000000 2048

1~1000000 N/A kbps 1~1000000 5120

1~1000000 N/A kbps 1~1000000 10240

1~1000000 N/A kbps 1~1000000 15360

1~1000000 N/A kbps 1~1000000 20480

1~1000000 N/A kbps 1~1000000 40960

1~1000000 N/A kbps 1~1000000 81920

1~1000000 N/A kbps 1~1000000 256

1~1000000 N/A kbps 1~1000000 512

1~1000000 N/A kbps 1~1000000 1024

1~1000000 N/A kbps 1~1000000 2048

1~1000000 N/A kbps 1~1000000 5120

1~1000000 N/A kbps 1~1000000 10240

1~1000000 N/A kbps 1~1000000 15360

1~1000000 N/A kbps 1~1000000 20480

1~1000000 N/A kbps 1~1000000 40960

0~255 N/A None 0~255 None

CustomFrameOffse
t(User-defined
frame offset),
CustomFrameOffse
TL_FrameOffset(T- CustomFrameOffse
t~0, CustomFrameOffse
L Dual Mode frame t, TL_FrameOffset,
TL_FrameOffset~1, None t(User-defined
offset), TL_FrameOffset_S
TL_FrameOffset_S frame offset)
TL_FrameOffset_S A2_SSP5
A2_SSP5~2
A2_SSP5(T-L Dual
Mode SA2+SSP5
frame offset)

0~261120,275943~ 0~261120,275943~
N/A Ts 0
307200 307200

0~255 N/A None 0~255 None

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 00:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 00:00:00

0~72 N/A h 0~72 0

0~255 N/A None 0~255 None

MODE1(UL band
division scheme
No.1), MODE2(UL
band division
MODE1~1,
scheme No.2), INVALID(Invalid UL
MODE2~2, MODE1, MODE2,
MODE3(UL band None band division
MODE3~3, MODE3, INVALID
division scheme scheme)
INVALID~255
No.3),
INVALID(Invalid UL
band division
scheme)

0~255 N/A None 0~255 None

1~10 N/A 2RB 2~20 1

-6~12 N/A dB -6~12 -3

0~255 N/A None 0~255 None

1_10(1/10),
2_10(2/10),
3_10(3/10),
1_10~0, 2_10~1,
4_10(4/10), 1_10, 2_10, 3_10,
3_10~2, 4_10~3,
5_10(5/10), 4_10, 5_10, 6_10,
5_10~4, 6_10~5, None None
6_10(6/10), 7_10, 8_10, 9_10,
7_10~6, 8_10~7,
7_10(7/10), 10_10
9_10~8, 10_10~9
8_10(8/10),
9_10(9/10),
10_10(10/10)
1_10(1/10),
2_10(2/10),
3_10(3/10),
1_10~0, 2_10~1,
4_10(4/10), 1_10, 2_10, 3_10,
3_10~2, 4_10~3,
5_10(5/10), 4_10, 5_10, 6_10,
5_10~4, 6_10~5, None None
6_10(6/10), 7_10, 8_10, 9_10,
7_10~6, 8_10~7,
7_10(7/10), 10_10
9_10~8, 10_10~9
8_10(8/10),
9_10(9/10),
10_10(10/10)

1~40 N/A ms 1~40 5

45~1500 N/A byte 45~1500 80

0~255 N/A None 0~255 None

0~9 N/A None 0~9 4

TM1(TM1),
TM2(TM2),
TM1~0, TM2~1,
TM4(TM4), TM1, TM2, TM4,
TM4~3, TM7~6, None TM2(TM2)
TM7(TM7), TM7, TM8, TM9
TM8~7, TM9~8
TM8(TM8),
TM9(TM9)

0~15 N/A None 0~15 None

0~100 N/A RB 0~100 None

0~100 N/A RB 0~100 None

0~4294967295 N/A 0.01mW 0~42949672.95 None

0~4294967295 N/A 0.01mW 0~42949672.95 None

0~1200 N/A None 0~1200 None

0~1200 N/A None 0~1200 None

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

0~255 N/A None 0~255 None

MOD_PERIOD_CO MOD_PERIOD_CO MOD_PERIOD_CO

EFF_N2(2), EFF_N2~0, EFF_N2,
MOD_PERIOD_CO MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N4(4), EFF_N4~1, EFF_N4, MOD_PERIOD_CO
None
MOD_PERIOD_CO MOD_PERIOD_CO MOD_PERIOD_CO EFF_N2(2)
EFF_N8(8), EFF_N8~2, EFF_N8,
MOD_PERIOD_CO MOD_PERIOD_CO MOD_PERIOD_CO
EFF_N16(16) EFF_N16~3 EFF_N16

0~255 N/A None 0~255 None

-3175~3175 N/A 0.005dB -15.875~15.875 -600
-3175~3175 N/A 0.005dB -15.875~15.875 -600
-3175~3175 N/A 0.005dB -15.875~15.875 0
-3175~3175 N/A 0.005dB -15.875~15.875 -600
-3175~3175 N/A 0.005dB -15.875~15.875 0
-3175~3175 N/A 0.005dB -15.875~15.875 0
-3175~3175 N/A 0.005dB -15.875~15.875 0

20~40 N/A W 20~40 20

0~60,255 N/A 0.1dB 0~6,255 255

0~255 N/A None 0~255 None

-600~500 N/A 0.1dBm -60~50 182

0~3 N/A None 0~3 1

0~60 N/A 0.1dB 0~6 0

0~255 N/A None 0~255 None

DB0_PWR_RAMPI DB0_PWR_RAMPI DB0_PWR_RAMPI

NG_STEP(0dB), NG_STEP~0, NG_STEP,
DB2_PWR_RAMPI DB2_PWR_RAMPI DB2_PWR_RAMPI
NG_STEP(2dB), NG_STEP~1, NG_STEP, DB2_PWR_RAMPI
dB
DB4_PWR_RAMPI DB4_PWR_RAMPI DB4_PWR_RAMPI NG_STEP(2dB)
NG_STEP(4dB), NG_STEP~2, NG_STEP,
DB6_PWR_RAMPI DB6_PWR_RAMPI DB6_PWR_RAMPI
NG_STEP(6dB) NG_STEP~3 NG_STEP
DBM_120(-
120dBm),
DBM_118(-
118dBm),
DBM_116(-
116dBm),
DBM_120~0,
DBM_114(-
DBM_118~1, DBM_120,
114dBm),
DBM_116~2, DBM_118,
DBM_112(-
DBM_114~3, DBM_116,
112dBm),
DBM_112~4, DBM_114,
DBM_110(-
DBM_110~5, DBM_112,
110dBm),
DBM_108~6, DBM_110,
DBM_108(-
DBM_106~7, DBM_108, DBM_104(-
108dBm), dBm
DBM_104~8, DBM_106, 104dBm)
DBM_106(-
DBM_102~9, DBM_104,
106dBm),
DBM_100~10, DBM_102,
DBM_104(-
DBM_98~11, DBM_100,
104dBm),
DBM_96~12, DBM_98, DBM_96,
DBM_102(-
DBM_94~13, DBM_94, DBM_92,
102dBm),
DBM_92~14, DBM_90
DBM_100(-
DBM_90~15
100dBm),
DBM_98(-98dBm),
DBM_96(-96dBm),
DBM_94(-94dBm),
DBM_92(-92dBm),
DBM_90(-90dBm)

0~15 N/A None 0~15 None

B56_MSG_SIZE_G B56_MSG_SIZE_G B56_MSG_SIZE_G

ROUPA(56bits), ROUPA~0, ROUPA,
B144_MSG_SIZE_ B144_MSG_SIZE_ B144_MSG_SIZE_
GROUPA(144bits), GROUPA~1, GROUPA, B56_MSG_SIZE_G
bit
B208_MSG_SIZE_ B208_MSG_SIZE_ B208_MSG_SIZE_ ROUPA(56bits)
GROUPA(208bits), GROUPA~2, GROUPA,
B256_MSG_SIZE_ B256_MSG_SIZE_ B256_MSG_SIZE_
GROUPA(256bits) GROUPA~3 GROUPA
0~94 N/A None 0~94 6

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~63 N/A None 0~63 3

N3_PREMB_TRAN
S_MAX(3times), N3_PREMB_TRAN N3_PREMB_TRAN
N4_PREMB_TRAN S_MAX~0, S_MAX,
S_MAX(4times), N4_PREMB_TRAN N4_PREMB_TRAN
N5_PREMB_TRAN S_MAX~1, S_MAX,
S_MAX(5times), N5_PREMB_TRAN N5_PREMB_TRAN
N6_PREMB_TRAN S_MAX~2, S_MAX,
S_MAX(6times), N6_PREMB_TRAN N6_PREMB_TRAN
N7_PREMB_TRAN S_MAX~3, S_MAX,
S_MAX(7times), N7_PREMB_TRAN N7_PREMB_TRAN
N8_PREMB_TRAN S_MAX~4, S_MAX,
S_MAX(8times), N8_PREMB_TRAN N8_PREMB_TRAN N10_PREMB_TRA
None
N10_PREMB_TRA S_MAX~5, S_MAX, NS_MAX(10times)
NS_MAX(10times), N10_PREMB_TRA N10_PREMB_TRA
N20_PREMB_TRA NS_MAX~6, NS_MAX,
NS_MAX(20times), N20_PREMB_TRA N20_PREMB_TRA
N50_PREMB_TRA NS_MAX~7, NS_MAX,
NS_MAX(50times), N50_PREMB_TRA N50_PREMB_TRA
N100_PREMB_TR NS_MAX~8, NS_MAX,
ANS_MAX(100time N100_PREMB_TR N100_PREMB_TR
s), ANS_MAX~9, ANS_MAX,
N200_PREMB_TR N200_PREMB_TR N200_PREMB_TR
ANS_MAX(200time ANS_MAX~10 ANS_MAX
s)
SF40_MAC_RESO
LUTION_TIMER(40
), SF40_MAC_RESO SF40_MAC_RESO
SF48_MAC_RESO LUTION_TIMER~4, LUTION_TIMER,
LUTION_TIMER(48 SF48_MAC_RESO SF48_MAC_RESO
SF64_MAC_RESO
), LUTION_TIMER~5, LUTION_TIMER,
subframe LUTION_TIMER(64
SF56_MAC_RESO SF56_MAC_RESO SF56_MAC_RESO
)
LUTION_TIMER(56 LUTION_TIMER~6, LUTION_TIMER,
), SF64_MAC_RESO SF64_MAC_RESO
SF64_MAC_RESO LUTION_TIMER~7 LUTION_TIMER
LUTION_TIMER(64
)

1~8 N/A None 1~8 5

Ratio4(4/64),
Ratio4~0, Ratio8~1,
Ratio8(8/64),
Ratio12~2,
Ratio12(12/64),
Ratio16~3,
Ratio16(16/64),
Ratio20~4,
Ratio20(20/64), Ratio4, Ratio8,
Ratio24~5,
Ratio24(24/64), Ratio12, Ratio16,
Ratio28~6,
Ratio28(28/64), Ratio20, Ratio24,
Ratio32~7,
Ratio32(32/64), Ratio28, Ratio32,
Ratio36~8, None Ratio52(52/64)
Ratio36(36/64), Ratio36, Ratio40,
Ratio40~9,
Ratio40(40/64), Ratio44, Ratio48,
Ratio44~10,
Ratio44(44/64), Ratio52, Ratio56,
Ratio48~11,
Ratio48(48/64), Ratio60, Ratio64
Ratio52~12,
Ratio52(52/64),
Ratio56~13,
Ratio56(56/64),
Ratio60~14,
Ratio60(60/64),
Ratio64~15
Ratio64(64/64)
6~100 N/A % 6~100 50

0~255 N/A None 0~255 None

SC0(0), SC1(1), SC0~0, SC1~1,

SC2(2), SC3(3), SC2~2, SC3~3,
SC4(4), SC5(5), SC4~4, SC5~5,
SC0, SC1, SC2,
SC6(6), SC7(7), SC6~6, SC7~7,
SC3, SC4, SC5,
SC8(8), SC9(9), SC8~8, SC9~9,
None SC6, SC7, SC8, SC3(3)
SC10(10), SC10~10,
SC9, SC10, SC11,
SC11(11), SC11~11,
SC12, SC13, SC14
SC12(12), SC12~12,
SC13(13), SC13~13,
SC14(14) SC14~14
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1
ACCESS_FIRST(A
ccess First),
ACCESS_FIRST~0
EXPERIENCE_FIR ACCESS_FIRST,
,
ST(Experience EXPERIENCE_FIR
EXPERIENCE_FIR
First), ST, ACCESS_ENHANC
ST~1,
EXPERIENCE_EN None EXPERIENCE_EN ED(Access
EXPERIENCE_EN
HANCED(Experien HANCED, Enhanced)
HANCED~2,
ce Enhanced), ACCESS_ENHANC
ACCESS_ENHANC
ACCESS_ENHANC ED
ED~3
ED(Access
Enhanced)
DEFAULTMODE(D
DEFAULTMODE~0,
efault Mode), DEFAULTMODE, ADAPTIVEMODE(A
ADAPTIVEMODE~ None
ADAPTIVEMODE(A ADAPTIVEMODE daptive Mode)
1
daptive Mode)

BW0(BW0),
BW1(BW1),
BW2(BW2),
BW0~0, BW1~1,
BW3(BW3), BW0, BW1, BW2,
BW2~2, BW3~3,
BW4(BW4), BW3, BW4, BW5,
BW4~4, BW5~5,
BW5(BW5), None BW6, BW7, None
BW6~6, BW7~7,
BW6(BW6), INVALID_BANDWI
INVALID_BANDWI
BW7(BW7), DTH
DTH~255
INVALID_BANDWI
DTH(Invalid
bandwidth)

0~255 N/A None 0~255 None

NORMAL, NORMAL~0, NORMAL,
None NORMAL
EXTENDED EXTENDED~1 EXTENDED

ONE_SIXTH~0,
ONE_SIXTH, HALF, ONE_SIXTH, HALF,
HALF~1, ONE~2, None ONE
ONE, TWO ONE, TWO
TWO~3

0~255 N/A None 0~255 None

rf32(32 radio
frames), rf64(64
radio frames), rf32~0, rf64~1, rf32, rf64, rf128, rf128(128 radio
None
rf128(128 radio rf128~2, rf256~3 rf256 frames)
frames), rf256(256
radio frames)

FOURT~0,
FOURT, TWOT, FOURT, TWOT,
TWOT~1, ONET~2,
ONET, HALFT, ONET, HALFT,
HALFT~3,
QUARTERT, QUARTERT,
QUARTERT~4,
ONE_EIGHTT, ONE_EIGHTT,
ONE_EIGHTT~5, None ONET
ONE_SIXTEENTHT ONE_SIXTEENTHT
ONE_SIXTEENTHT
, ,
~6,
ONE_THIRTY_SEC ONE_THIRTY_SEC
ONE_THIRTY_SEC
ONDT ONDT
ONDT~7
1~3 N/A None 1~3 1
1~16 N/A None 1~16 16
PAGING_STRATE
GY_FIFO(First-in
PAGING_STRATE PAGING_STRATE
First-out Strategy), PAGING_STRATE
GY_FIFO~0, GY_FIFO,
PAGING_STRATE None GY_FIFO(First-in
PAGING_STRATE PAGING_STRATE
GY_DIFFPRI(Priorit First-out Strategy)
GY_DIFFPRI~1 GY_DIFFPRI
y Differentiation
Strategy)

0~255 N/A None 0~255 None

1~4 N/A None 1~4 4

INTER_SUB_FRA
INTER_SUB_FRA INTER_SUB_FRA
ME(Inter),
ME~0, ME, INTER_SUB_FRA
INTRA_AND_INTE None
INTRA_AND_INTE INTRA_AND_INTE ME(Inter)
R_SUB_FRAME(Int
R_SUB_FRAME~1 R_SUB_FRAME
er And Intra)
0~98 N/A RB 0~98 22
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~29 N/A None 0~29 0
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~7 N/A None 0~7 0

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

0~255 N/A None 0~255 None

DS1_DELTA_SHIF DS1_DELTA_SHIF DS1_DELTA_SHIFT

T(ds1), T~0, ,
DS2_DELTA_SHIF DS2_DELTA_SHIF DS2_DELTA_SHIFT DS1_DELTA_SHIF
None
T(ds2), T~1, , T(ds1)
DS3_DELTA_SHIF DS3_DELTA_SHIF DS3_DELTA_SHIF
T(ds3) T~2 T
0~1000 N/A None 0~1000 6

0~20 N/A None 0~20 1

1~24 N/A 2RB 2~48 1

0~2047 N/A None 0~2047 None

FIXEDMODE(Fixed
Mode), FIXEDMODE~0, FIXEDMODE, FIXEDMODE(Fixed
None
RANDOMMODE(R RANDOMMODE~1 RANDOMMODE Mode)
andom Mode)
OFF(OFF),
OFF~0,
QCIADAPTIVE(QCI OFF,
QCIADAPTIVE~1, QCIADAPTIVE(QCI
ADAPTIVE), None QCIADAPTIVE,
NOQCIADAPTIVE~ ADAPTIVE)
NOQCIADAPTIVE( NOQCIADAPTIVE
2
NOQCIADAPTIVE)

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

1~4095 N/A None 1~4095 None

0~15 N/A None 0~15 None

0~32767 N/A None 0~32767 None

0~65535 N/A None 0~65535 None

0~8 characters N/A None 0~8 characters None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
 bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, bc3
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~127 N/A None 0~127 0

0~4095 N/A None 0~4095 0

0~7 N/A None 0~7 1

0~7 N/A None 0~7 7

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~63 N/A None 0~63 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

0~7 N/A None 0~7 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A None 0~255 6

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A None 0~255 2

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
NO(NO), YES(YES) NO~0, YES~1 None NO, YES YES(YES)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

IMSIS_ESN(IMSI_S
and ESN), IMSIS_ESN~0,
IMSIS_ESN, IMSI, IMSI_ESN(IMSI
IMSI(IMSI), IMSI~2, None
IMSI_ESN and ESN)
IMSI_ESN(IMSI IMSI_ESN~3
and ESN)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
NO(NO), YES(YES) NO~0, YES~1 None NO, YES NO(NO)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A 0.125dB 0~31.875 40

0~255 N/A 0.125dB 0~31.875 48

0~255 N/A 0.125dB 0~31.875 42

0~255 N/A 0.125dB 0~31.875 40

0~255 N/A 0.125dB 0~31.875 40

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

1~15 N/A None 1~15 4

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A 80ms 0~20400 30

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A 100ms 0~25500 60

0~255 N/A None 0~255 None

3~28 characters N/A None 3~28 characters None

3~8 characters N/A None 3~8 characters None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~2047 N/A None 0~2047 None

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M
PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~255 N/A None 0~255 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A None 0~255 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~255 N/A None 0~255 0

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

3~28 characters N/A None 3~28 characters None

3~8 characters N/A None 3~8 characters None

0~50 N/A None 0~50 None

0~255 N/A None 0~255 None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~2047 N/A None 0~2047 None

-15~15 N/A dB -15~15 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~15 N/A None 0~15 8

0~32 N/A None 0~32 0

0~59 N/A None 0~59 None

0~59 N/A None 0~59 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

DLCOMP_STATUS DLCOMP_STATUS
_NORMAL(), _NORMAL~0, DLCOMP_STATUS
CELL_OUTBOUND CELL_OUTBOUND _NORMAL,
(), ~1, CELL_OUTBOUND
CELL_CONFIG_DI CELL_CONFIG_DI ,
FF(), FF~2, CELL_CONFIG_DI
None None
EX2_ABNORMAL() EX2_ABNORMAL~ FF,
, 3, EX2_ABNORMAL,
CELL_ABNORMAL CELL_ABNORMAL CELL_ABNORMAL,
(), ~4, OTHER_ABNORM
OTHER_ABNORM OTHER_ABNORM AL
AL() AL~255

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~19 N/A None 0~19 None

0~19 N/A None 0~19 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~65535 N/A None 0~65535 None

1~65533,65535 N/A None 1~65533,65535 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~4095 N/A None 0~4095 None

0~65535 N/A None 0~65535 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

3~28 characters N/A None 3~28 characters None

3~8 characters N/A None 3~8 characters None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~2047 N/A None 0~2047 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~511 N/A None 0~511 None

0~99 characters N/A None 0~99 characters NULL(empty string)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

1~4095 N/A None 1~4095 None

0~15 N/A None 0~15 None

 bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~2047 N/A None 0~2047 None

0~32767 N/A None 0~32767 None

0~65535 N/A None 0~65535 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~8 characters N/A None 0~8 characters NULL(empty string)

0~511 N/A None 0~511 None

0~99 characters N/A None 0~99 characters NULL(empty string)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~255 N/A None 0~255 None

1~4095 N/A None 1~4095 None

0~15 N/A None 0~15 None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~2047 N/A None 0~2047 None

0~32767 N/A None 0~32767 None

0~65535 N/A None 0~65535 None

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M
PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~255 N/A None 0~255 None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 2

-63~0 N/A 0.5dB -31.5~0 -34

-63~0 N/A 0.5dB -31.5~0 -34

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 2

-63~0 N/A 0.5dB -31.5~0 -26

-63~0 N/A 0.5dB -31.5~0 -26

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~65535 N/A None 0~65535 None

1~65533,65535 N/A None 1~65533,65535 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~255 N/A None 0~255 0

GSM_dcs1800, GSM_dcs1800~0, GSM_dcs1800,

None None
GSM_pcs1900 GSM_pcs1900~1 GSM_pcs1900

0~1023 N/A None 0~1023 None

0~7 N/A None 0~7 None

0~7 N/A None 0~7 None

DTM_AVAILABLE~
DTM_AVAILABLE, DTM_AVAILABLE,
0, DTM_NOT_AVAILA
DTM_NOT_AVAILA None DTM_NOT_AVAILA
DTM_NOT_AVAILA BLE
BLE BLE
BLE~1

0~99 characters N/A None 0~99 characters NULL(empty string)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

NO(No), YES(Yes) NO~0, YES~1 None NO, YES NO(No)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)
0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

1~65533,65535 N/A None 1~65533,65535 None

0~65535 N/A None 0~65535 None

PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)
PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU
M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M

0~32 N/A None 0~32 0

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)

NO(NO), YES(YES) NO~0, YES~1 None NO, YES NO(NO)

0~64 N/A None 0~64 0

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~1048575 N/A None 0~1048575 None

0~32 characters N/A None 0~32 characters None

0~32 characters N/A None 0~32 characters None

0~255 N/A None 0~255 None

0~31 N/A None 0~31 None

GSM, GPRS, GSM~0, GPRS~1, GSM, GPRS,

None None
EDGE EDGE~2 EDGE

0~1023 N/A None 0~1023 None

GSM_dcs1800, GSM_dcs1800~0, GSM_dcs1800,

None None
GSM_pcs1900 GSM_pcs1900~1 GSM_pcs1900

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~39 N/A dBm 0~39 0

0~45 N/A 2dBm -115~-25 0

0~31 N/A 2dB 0~62 7

0~31 N/A 2dB 0~62 7

-15~15 N/A dB -15~15 0

0~255 N/A None 0~255 255

0~8 N/A None 0~8 0

NON_CONTINUOU
S(NON_CONTINU NON_CONTINUOU NON_CONTINUOU
NON_CONTINUOU
OUS), S~0, None S(NON_CONTINU
S, CONTINUOUS
CONTINUOUS(CO CONTINUOUS~1 OUS)
NTINUOUS)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, ALLOWED(ALLOW
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED ED)
ED)
0~31 N/A None 0~31 0

0~255 N/A None 0~255 None

0~31 N/A None 0~31 None

0~1023 N/A None 0~1023 None

0~255 N/A None 0~255 None

0~503 N/A None 0~503 None

0~99 characters N/A None 0~99 characters NULL(empty string)

n1(n1), n4(n4),
n8(n8), n12(n12),
n1~0, n4~1, n8~2,
n16(n16), n24(n24),
n12~3, n16~4, n1, n4, n8, n12,
n32(n32), n48(n48),
n24~5, n32~6, n16, n24, n32, n48,
n64(n64), n84(n84),
n48~7, n64~8, None n64, n84, n96, n1(n1)
n96(n96),
n84~9, n96~10, n128, n168, n252,
n128(n128),
n128~11, n168~12, n504
n168(n168),
n252~13, n504~14
n252(n252),
n504(n504)

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M
PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)

LOW_PRIORITY(L
LOW_PRIORITY~0
ow Priority), LOW_PRIORITY, LOW_PRIORITY(L
, None
HIGH_PRIORITY(H HIGH_PRIORITY ow Priority)
HIGH_PRIORITY~1
igh Priority)
0~15 N/A dB 0~15 0

FORMAL(FORMAL
), FORMAL~0, FORMAL, FORMAL(FORMAL
None
EXTENDED(EXTE EXTENDED~1 EXTENDED )
NDED)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)
0~503 N/A None 0~503 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~255 N/A None 0~255 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535
NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

18000~46589,5443 18000~46589,5443
N/A None 18000
6~65535 6~65535

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 1

0~7 N/A s 0~7 1

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0DOT25_ENUM(0.
25),
0DOT25_ENUM~0, 0DOT25_ENUM,
0DOT5_ENUM(0.5)
0DOT5_ENUM~1, 0DOT5_ENUM,
, None 1DOT0_ENUM(1.0)
0DOT75_ENUM~2, 0DOT75_ENUM,
0DOT75_ENUM(0.
1DOT0_ENUM~3 1DOT0_ENUM
75),
1DOT0_ENUM(1.0)
0DOT25_ENUM(0.
25),
0DOT25_ENUM~0, 0DOT25_ENUM,
0DOT5_ENUM(0.5)
0DOT5_ENUM~1, 0DOT5_ENUM, 0DOT75_ENUM(0.
, None
0DOT75_ENUM~2, 0DOT75_ENUM, 75)
0DOT75_ENUM(0.
1DOT0_ENUM~3 1DOT0_ENUM
75),
1DOT0_ENUM(1.0)

MBW6(1.4M), MBW6~0,
MBW15(3M), MBW15~1,
MBW6, MBW15,
MBW25(5M), MBW25~2,
None MBW25, MBW50, None
MBW50(10M), MBW50~3,
MBW75, MBW100
MBW75(15M), MBW75~4,
MBW100(20M) MBW100~5
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

0~31 N/A 2dB 0~62 11

0~31 N/A 2dB 0~62 11

-70~-22 N/A 2dBm -140~-44 -64

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

-30~33 N/A dBm -30~33 23

BitString00(00), BitString00~0, BitString00,
BitString01(01), BitString01~1, BitString01,
None BitString01(01)
BitString10(10), BitString10~2, BitString10,
BitString11(11) BitString11~3 BitString11

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

EventA3(EventA3), EventA3~0,
EventA3, EventA4,
EventA4(EventA4), EventA4~1, None EventA4(EventA4)
EventA5
EventA5(EventA5) EventA5~2

0~31 N/A dB 0~31 0

0~31 N/A dB 0~31 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

-34~-3 N/A dB -34~-3 -18

0~8 N/A None 0~8 0

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, ALLOWED(ALLOW
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED ED)
ED)

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE DISABLE(Disable)
ENABLE(Enable) ENABLE~1
0~100 N/A % 0~100 0

0~7 N/A None 0~7 7

dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

0~8 N/A None 0~8 0

-20~20 N/A dBm -20~20 0

-20~20 N/A dBm -20~20 0

FALSE(False),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(False)
TRUE(True)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1
LOW_SPEED(Low
speed Inter-
frequency),
HIGH_SPEED(High
speed Inter- LOW_SPEED~0, LOW_SPEED,
frequency), HIGH_SPEED~1, HIGH_SPEED,
LOW_SPEED(Low
ULTRA_HIGH_SPE ULTRA_HIGH_SPE ULTRA_HIGH_SPE
None speed Inter-
ED(Ultra high ED~2, ED,
frequency)
speed Inter- EXTRA_HIGH_SPE EXTRA_HIGH_SPE
frequency), ED~3 ED
EXTRA_HIGH_SPE
ED(Extra high
speed Inter-
frequency)

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, ALLOWED(ALLOW
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED ED)
ED)
0~8 N/A None 0~8 1

0~31 N/A None 0~31 0

NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, NOT_ALLOWED(N
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED OT_ALLOWED)
ED)

EventA4(EventA4), EventA4~0,
None EventA4, EventA5 EventA4(EventA4)
EventA5(EventA5) EventA5~1
NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, NOT_ALLOWED(N
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED OT_ALLOWED)
ED)

0~7 N/A None 0~7 7

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~255 N/A None 0~255 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~503 N/A None 0~503 None

0~99 characters N/A None 0~99 characters NULL(empty string)

n1(n1), n4(n4),
n8(n8), n12(n12),
n1~0, n4~1, n8~2,
n16(n16), n24(n24),
n12~3, n16~4, n1, n4, n8, n12,
n32(n32), n48(n48),
n24~5, n32~6, n16, n24, n32, n48,
n64(n64), n84(n84),
n48~7, n64~8, None n64, n84, n96, n1(n1)
n96(n96),
n84~9, n96~10, n128, n168, n252,
n128(n128),
n128~11, n168~12, n504
n168(n168),
n252~13, n504~14
n252(n252),
n504(n504)

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)
dB-24(-24dB), dB-
22(-22dB), dB-20(-
20dB), dB-18(-
18dB), dB-16(-
16dB), dB-14(-
14dB), dB-12(-
12dB), dB-10(- dB-24~0, dB-22~1,
10dB), dB-8(-8dB), dB-20~2, dB-18~3,
dB-6(-6dB), dB-5(- dB-16~4, dB-14~5,
dB-24, dB-22, dB-
5dB), dB-4(-4dB), dB-12~6, dB-10~7,
20, dB-18, dB-16,
dB-3(-3dB), dB-2(- dB-8~8, dB-6~9,
dB-14, dB-12, dB-
2dB), dB-1(-1dB), dB-5~10, dB-4~11,
10, dB-8, dB-6, dB-
dB0(0dB), dB-3~12, dB-2~13,
5, dB-4, dB-3, dB-2,
dB1(1dB), dB-1~14, dB0~15,
dB dB-1, dB0, dB1, dB0(0dB)
dB2(2dB), dB1~16, dB2~17,
dB2, dB3, dB4,
dB3(3dB), dB3~18, dB4~19,
dB5, dB6, dB8,
dB4(4dB), dB5~20, dB6~21,
dB10, dB12, dB14,
dB5(5dB), dB8~22, dB10~23,
dB16, dB18, dB20,
dB6(6dB), dB12~24, dB14~25,
dB22, dB24
dB8(8dB), dB16~26, dB18~27,
dB10(10dB), dB20~28, dB22~29,
dB12(12dB), dB24~30
dB14(14dB),
dB16(16dB),
dB18(18dB),
dB20(20dB),
dB22(22dB),
dB24(24dB)

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M

PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)
0~32 N/A None 0~32 0

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)
LOW_PRIORITY(L
LOW_PRIORITY~0
ow Priority), LOW_PRIORITY, LOW_PRIORITY(L
, None
HIGH_PRIORITY(H HIGH_PRIORITY ow Priority)
HIGH_PRIORITY~1
igh Priority)

NO(NO), YES(YES) NO~0, YES~1 None NO, YES NO(NO)

NULL(NULL),
SAME(SAME), NULL~0, SAME~1, NULL, SAME, BIG,
None NULL(NULL)
BIG(BIG), BIG~2, SMALL~3 SMALL
SMALL(SMALL)

FORMAL(FORMAL
), FORMAL~0, FORMAL, FORMAL(FORMAL
None
EXTENDED(EXTE EXTENDED~1 EXTENDED )
NDED)
AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~503 N/A None 0~503 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535
3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~1048575 N/A None 0~1048575 None

0~255 N/A None 0~255 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

18000~46589,5443 18000~46589,5443
N/A None 18000
6~65535 6~65535

0~503 N/A None 0~503 None

0~65535 N/A None 0~65535 None

0~99 characters N/A None 0~99 characters NULL(empty string)

0~2 N/A None 0~2 None

1~64 N/A None 1~64 None

NO(No), YES(Yes) NO~0, YES~1 None NO, YES NO(No)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~255 N/A None 0~255 None

bc0~0, bc1~1,
bc2~2, bc3~3,
bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc0, bc1, bc2, bc3,
bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc4, bc5, bc6, bc7,
bc8, bc9, bc10, bc8~8, bc9~9, bc8, bc9, bc10,
bc11, bc12, bc13, bc10~10, bc11~11, None bc11, bc12, bc13, None
bc14, bc15, bc16, bc12~12, bc13~13, bc14, bc15, bc16,
bc17, bc18, bc19, bc14~14, bc15~15, bc17, bc18, bc19,
bc20, bc21 bc16~16, bc17~17, bc20, bc21
bc18~18, bc19~19,
bc20~20, bc21~21

0~5 N/A None 0~5 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~5 N/A None 0~5 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~31 N/A None 0~31 None

0~5 N/A None 0~5 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~31 N/A None 0~31 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~4095 N/A None 0~4095 None

0~65535 N/A None 0~65535 None

PERMIT_HO_ENU PERMIT_HO_ENU PERMIT_HO_ENU

M(Permit Ho), M~0, M, PERMIT_HO_ENU
None
FORBID_HO_ENU FORBID_HO_ENU FORBID_HO_ENU M(Permit Ho)
M(Forbid Ho) M~1 M
PERMIT_RMV_EN
UM(Permit ANR PERMIT_RMV_EN PERMIT_RMV_EN
PERMIT_RMV_EN
Remove), UM~0, UM,
None UM(Permit ANR
FORBID_RMV_EN FORBID_RMV_EN FORBID_RMV_EN
Remove)
UM(Forbid ANR UM~1 UM
Remove)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1
0~32 N/A None 0~32 0

LOW_PRIORITY(L
LOW_PRIORITY~0
ow Priority), LOW_PRIORITY, LOW_PRIORITY(L
, None
HIGH_PRIORITY(H HIGH_PRIORITY ow Priority)
HIGH_PRIORITY~1
igh Priority)

NO(NO), YES(YES) NO~0, YES~1 None NO, YES NO(NO)

0~128 N/A None 0~128 0
0~99 characters N/A None 0~99 characters NULL(empty string)

0~99 characters N/A None 0~99 characters NULL(empty string)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~1048575 N/A None 0~1048575 None

0~32 characters N/A None 0~32 characters None

0~32 characters N/A None 0~32 characters None

0~32 characters N/A None 0~32 None

0~32 characters N/A None 0~32 None

Normal~0,
Normal, Overload, Normal, Overload,
Overload~1,
Congestion, None Congestion, None
Congestion~2,
Midload Midload
Midload~3

0~255 N/A None 0~255 None

0~16383 N/A None 0~16383 None

0~5 N/A None 0~5 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~16383 N/A None 0~16383 None

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 0

0~255 N/A None 0~255 None

0~16383 N/A None 0~16383 None

R99, HSDPA, R99~0, HSDPA~1, R99, HSDPA,

None HSUPA
HSUPA, HSPA HSUPA~2, HSPA~3 HSUPA, HSPA

UTRAN_FDD, UTRAN_FDD~0, UTRAN_FDD,

None UTRAN_FDD
UTRAN_TDD UTRAN_TDD~1 UTRAN_TDD
NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~16383 N/A None 0~16383 0

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)

0~7 N/A None 0~7 1

-50~33 N/A dBm -50~33 24

-15~15 N/A dB -15~15 0

-24~0 N/A dB -24~0 -22

-60~-13 N/A 2dBm -119~-25 -58

0~31 N/A 2dB 0~62 6

0~31 N/A 2dB 0~62 6

0~31 N/A dB 0~31 0

0~31 N/A dB 0~31 0

Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0, Priority_0,
4),
Priority_1~1, Priority_1,
Priority_5(Priority
Priority_2~2, Priority_2,
5),
Priority_3~3, Priority_3,
Priority_6(Priority
Priority_4~4, Priority_4,
6),
Priority_5~5, Priority_5,
Priority_7(Priority
Priority_6~6, Priority_6,
7),
Priority_7~7, Priority_7,
Priority_8(Priority
Priority_8~8, None Priority_8, Priority_2(Priority 2)
8),
Priority_9~9, Priority_9,
Priority_9(Priority
Priority_10~10, Priority_10,
9),
Priority_11~11, Priority_11,
Priority_10(Priority
Priority_12~12, Priority_12,
10),
Priority_13~13, Priority_13,
Priority_11(Priority
Priority_14~14, Priority_14,
11),
Priority_15~15, Priority_15,
Priority_12(Priority
Priority_16~16 Priority_16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)
Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0, Priority_0,
4),
Priority_1~1, Priority_1,
Priority_5(Priority
Priority_2~2, Priority_2,
5),
Priority_3~3, Priority_3,
Priority_6(Priority
Priority_4~4, Priority_4,
6),
Priority_5~5, Priority_5,
Priority_7(Priority
Priority_6~6, Priority_6,
7),
Priority_7~7, Priority_7,
Priority_8(Priority
Priority_8~8, None Priority_8, Priority_2(Priority 2)
8),
Priority_9~9, Priority_9,
Priority_9(Priority
Priority_10~10, Priority_10,
9),
Priority_11~11, Priority_11,
Priority_10(Priority
Priority_12~12, Priority_12,
10),
Priority_13~13, Priority_13,
Priority_11(Priority
Priority_14~14, Priority_14,
11),
Priority_15~15, Priority_15,
Priority_12(Priority
Priority_16~16 Priority_16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)

0~8 N/A None 0~8 0

Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0, Priority_0,
4),
Priority_1~1, Priority_1,
Priority_5(Priority
Priority_2~2, Priority_2,
5),
Priority_3~3, Priority_3,
Priority_6(Priority
Priority_4~4, Priority_4,
6),
Priority_5~5, Priority_5,
Priority_7(Priority
Priority_6~6, Priority_6,
7),
Priority_7~7, Priority_7,
Priority_8(Priority
Priority_8~8, None Priority_8, Priority_2(Priority 2)
8),
Priority_9~9, Priority_9,
Priority_9(Priority
Priority_10~10, Priority_10,
9),
Priority_11~11, Priority_11,
Priority_10(Priority
Priority_12~12, Priority_12,
10),
Priority_13~13, Priority_13,
Priority_11(Priority
Priority_14~14, Priority_14,
11),
Priority_15~15, Priority_15,
Priority_12(Priority
Priority_16~16 Priority_16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)

NON_CONTINUOU
S(NON_CONTINU NON_CONTINUOU NON_CONTINUOU
NON_CONTINUOU
OUS), S~0, None S(NON_CONTINU
S, CONTINUOUS
CONTINUOUS(CO CONTINUOUS~1 OUS)
NTINUOUS)

0~7 N/A None 0~7 0

FALSE(False),
FALSE~0, TRUE~1 None FALSE, TRUE FALSE(False)
TRUE(True)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_TRUE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE True)
True) 1
NOT_ALLOWED(N
OT_ALLOWED), NOT_ALLOWED~0 NOT_ALLOWED, ALLOWED(ALLOW
None
ALLOWED(ALLOW , ALLOWED~1 ALLOWED ED)
ED)

Priority_0(Priority
0),
Priority_1(Priority
1),
Priority_2(Priority
2),
Priority_3(Priority
3),
Priority_4(Priority
Priority_0~0, Priority_0,
4),
Priority_1~1, Priority_1,
Priority_5(Priority
Priority_2~2, Priority_2,
5),
Priority_3~3, Priority_3,
Priority_6(Priority
Priority_4~4, Priority_4,
6),
Priority_5~5, Priority_5,
Priority_7(Priority
Priority_6~6, Priority_6,
7),
Priority_7~7, Priority_7,
Priority_8(Priority
Priority_8~8, None Priority_8, Priority_2(Priority 2)
8),
Priority_9~9, Priority_9,
Priority_9(Priority
Priority_10~10, Priority_10,
9),
Priority_11~11, Priority_11,
Priority_10(Priority
Priority_12~12, Priority_12,
10),
Priority_13~13, Priority_13,
Priority_11(Priority
Priority_14~14, Priority_14,
11),
Priority_15~15, Priority_15,
Priority_12(Priority
Priority_16~16 Priority_16
12),
Priority_13(Priority
13),
Priority_14(Priority
14),
Priority_15(Priority
15),
Priority_16(Priority
16)
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~31 N/A None 0~31 0

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

0~4095 N/A None 0~4095 None

0~65535 N/A None 0~65535 None

0~16383 N/A None 0~16383 None

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~16383 N/A None 0~16383 0

UTRAN_FDD, UTRAN_FDD~0, UTRAN_FDD,

None UTRAN_FDD
UTRAN_TDD UTRAN_TDD~1 UTRAN_TDD

NOT_CFG(Not
NOT_CFG~0, NOT_CFG(Not
configure), None NOT_CFG, CFG
CFG~1 configure)
CFG(Configure)
0~255 N/A None 0~255 0

0~511 N/A None 0~511 None

1~65533,65535 N/A None 1~65533,65535 None

0~99 characters N/A None 0~99 characters NULL(empty string)

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

0~2 N/A None 0~2 None

1~64 N/A None 1~64 None

NO(No), YES(Yes) NO~0, YES~1 None NO, YES NO(No)

AUTO_MODE(Auto
Mode), AUTO_MODE~0, AUTO_MODE, AUTO_MODE(Auto
None
MANUAL_MODE(M MANUAL_MODE~1 MANUAL_MODE Mode)
anual Mode)

0~5 N/A None 0~5 None

0~23 N/A None 0~23 None

LOAD_BALANCE_
MODE_UNAVAILA
BLE(Load
Balancing Mode LOAD_BALANCE_
Unavailable), MODE_UNAVAILA LOAD_BALANCE_
LOAD_BALANCE_ BLE~0, MODE_UNAVAILA
MODE_OPEN(Load LOAD_BALANCE_ BLE,
Balancing Mode MODE_OPEN~1, LOAD_BALANCE_
Enabled), LOAD_BALANCE_ None MODE_OPEN, None
LOAD_BALANCE_ MODE_CLOSED~2 LOAD_BALANCE_
MODE_CLOSED(L , MODE_CLOSED,
oad Balancing LOAD_BALANCE_ LOAD_BALANCE_
Mode Disabled), MODE_BLOCKED~ MODE_BLOCKED
LOAD_BALANCE_ 3
MODE_BLOCKED(
Load Balancing
Mode Blocked)

BBP_CATEGORY_
NOT_SUPPORTED
(BBP Category Not
Supported),
BBP_STATUS_AB BBP_CATEGORY_
BBP_CATEGORY_
NORMAL(BBP NOT_SUPPORTED
NOT_SUPPORTED
Status Abnormal), ~0,
,
WORK_MODE_NO BBP_STATUS_AB
BBP_STATUS_AB
T_SUPPORTED(W NORMAL~1,
NORMAL,
ork Mode Not WORK_MODE_NO
WORK_MODE_NO
Supported), T_SUPPORTED~2,
T_SUPPORTED,
SWITCH_OFF(Swit SWITCH_OFF~3, None None
SWITCH_OFF,
ch Off), INTER_BOARD_D
INTER_BOARD_D
INTER_BOARD_D ATA_LINK_EXCEP
ATA_LINK_EXCEP
ATA_LINK_EXCEP TION~4,
TION,
TION(Inter-Board BBP_STATUS_BLO
BBP_STATUS_BLO
Data Link CKED~5,
CKED, NULL,
Exception), NULL~254,
UNKNOWN
BBP_STATUS_BLO UNKNOWN~255
CKED(BBP Status
Blocked), NULL,
UNKNOWN(Unkno
wn Reasons)

NULL,
PRIMARY_BBP_W NULL~0, NULL,
ORK_TYPE(Primar PRIMARY_BBP_W PRIMARY_BBP_W
y BBP), ORK_TYPE~1, None ORK_TYPE, None
SECONDARY_BBP SECONDARY_BBP SECONDARY_BBP
_WORK_TYPE(Sec _WORK_TYPE~2 _WORK_TYPE
ondary BBP)

0~7 N/A None 0~7 None

0~1 N/A None 0~1 None

0~5 N/A None 0~5 None

1~1440 N/A min 1~1440 60

0~100 N/A % 0~100 0
0~100 N/A % 0~100 0

UNBLOCK(Unblock
),
HIGH_PRIORITY_ UNBLOCK~0, UNBLOCK,
BLOCK(High HIGH_PRIORITY_ HIGH_PRIORITY_
Priority Block), BLOCK~1, BLOCK,
UNBLOCK(Unblock
MIDDLE_PRIORIT MIDDLE_PRIORIT None MIDDLE_PRIORIT
)
Y_BLOCK(Middle Y_BLOCK~2, Y_BLOCK,
Priority Block), LOW_PRIORITY_B LOW_PRIORITY_B
LOW_PRIORITY_B LOCK~3 LOCK
LOCK(Low Priority
Block)
0~4320 N/A min 0~4320 1080

S1(S1), X2(X2) S1~0, X2~1 None S1, X2 S1:Off, X2:Off

0~261120,275943~ 0~261120,275943~
N/A Ts 0
307200 307200

0~261120,275943~ 0~261120,275943~
N/A Ts 0
307200 307200

0~23,255 N/A None 0~23,255 255

COORDINATED_S
CHEDULING_ONL
Y(COORDINATED_ COORDINATED_S COORDINATED_S
COORDINATED_S
SCHEDULING_ON CHEDULING_ONL CHEDULING_ONLY
CHEDULING_ONL
LY), Y~0, ,
None Y(COORDINATED_
COORDINATED_S COORDINATED_S COORDINATED_S
SCHEDULING_ON
CHEDULING_MIXI CHEDULING_MIXI CHEDULING_MIXI
LY)
NG(COORDINATE NG~1 NG
D_SCHEDULING_
MIXING)

3~20 N/A ms 3~20 6

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~25 N/A None 1~25 1

FIX_MODE(Fixed
Mode), FIX_MODE~0, FIX_MODE, FIX_MODE(Fixed
None
ADP_MODE(Adapt ADP_MODE~1 ADP_MODE Mode)
Mode)

NORMAL(Normal
Mode), NORMAL~0, NORMAL,
NORMAL(Normal
LBBP_LARGE_CA LBBP_LARGE_CA None LBBP_LARGE_CA
Mode)
PACITY(Large PACITY~1 PACITY
Mode)
NORMAL(NORMAL
), NORMAL~0, NORMAL,
NORMAL(NORMAL
LARGECAPABILIT LARGECAPABILIT None LARGECAPABILIT
)
Y(LARGECAPABILI Y~1 Y
TY)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~65535 N/A None 0~65535 None

Cell(Cell),
Cell~0, eNodeB~1 None Cell, eNodeB Cell(Cell)
eNodeB(eNodeB)
BIGGERTHAN(BIG
GERTHAN),
EQUALTO(EQUALT
O),
BIGGERTHAN~0, BIGGERTHAN,
SMALLERTHAN(S
EQUALTO~1, EQUALTO,
MALLERTHAN),
SMALLERTHAN~2, SMALLERTHAN,
SMALLERTHANOR
SMALLERTHANOR SMALLERTHANOR BIGGERTHAN(BIG
EQUALTO(SMALL None
EQUALTO~3, EQUALTO, GERTHAN)
ERTHANOREQUAL
BIGGERTHANORE BIGGERTHANORE
TO),
QUALTO~4, QUALTO,
BIGGERTHANORE
NOTEQUALTO~5 NOTEQUALTO
QUALTO(BIGGERT
HANOREQUALTO),
NOTEQUALTO(NO
TEQUALTO)

- -
2147483647~2147 N/A None 2147483647~2147 0
483647 483647

USER_SPEC_OCC
UPY_RATE(USER_
SPEC_OCCUPY_R
ATE),
UL_PRB_UTILIZAT USER_SPEC_OCC USER_SPEC_OCC
ION_RATE(UL_PR UPY_RATE~0, UPY_RATE,
B_UTILIZATION_R UL_PRB_UTILIZAT UL_PRB_UTILIZAT USER_SPEC_OCC
ATE), ION_RATE~1, ION_RATE, UPY_RATE(USER_
None
DL_PRB_UTILIZAT DL_PRB_UTILIZAT DL_PRB_UTILIZAT SPEC_OCCUPY_R
ION_RATE(DL_PR ION_RATE~2, ION_RATE, ATE)
B_UTILIZATION_R PDCCH_CCE_UTIL PDCCH_CCE_UTIL
ATE), IZATION_RATE~3 IZATION_RATE
PDCCH_CCE_UTIL
IZATION_RATE(PD
CCH_CCE_UTILIZ
ATION_RATE)

0~65535 N/A None 0~65535 None

0~64 characters N/A None 0~64 NULL(empty string)

0~65535 N/A None 0~65535 None

0~64 characters N/A None 0~64 NULL(empty string)

0~65535 N/A None 0~65535 1

Cell(Cell),
Cell~0, eNodeB~1 None Cell, eNodeB Cell(Cell)
eNodeB(eNodeB)

0~255 N/A None 0~255 None

NORMAL(Normal), NORMAL~0, NORMAL,

None None
PENALTY(Penalty) PENALTY~1 PENALTY
0~65535 N/A None 0~65535 None

0~255 N/A None 0~255 None

MODIFY(MODIFY),
MODIFY~0,
RESUME(RESUME None MODIFY, RESUME MODIFY(MODIFY)
RESUME~1
)

AND(AND),
AND~0, OR~1 None AND, OR AND(AND)
OR(OR)

0~65535 N/A s 0~65535 300

1~500 characters N/A None 1~500 NULL(empty string)

0~65535 N/A None 0~65535 1

0~65535 N/A s 0~65535 300

BOTH(BOTH),
BOTH~0, FDD~1,
FDD(FDD), None BOTH, FDD, TDD BOTH(BOTH)
TDD~2
TDD(TDD)

ACTIVATED(ACTIV
ATED), ACTIVATED~0, ACTIVATED, ACTIVATED(ACTIV
None
DEACTIVATED(DE DEACTIVATED~1 DEACTIVATED ATED)
ACTIVATED)

UN-
EXECUTED(UN-
EXECUTED), UN-EXECUTED~0, UN-EXECUTED,
EXECUTING(EXEC EXECUTING~1, None EXECUTING, None
UTING), EXECUTED~2 EXECUTED
EXECUTED(EXEC
UTED)

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

ACTIVATED(ACTIV
ATED), ACTIVATED~0, ACTIVATED, ACTIVATED(ACTIV
None
DEACTIVATED(DE DEACTIVATED~1 DEACTIVATED ATED)
ACTIVATED)

3 characters N/A None 000~999 None

2~3 characters N/A None 00~99,000~999 None

EUTRAN(EUTRAN) EUTRAN~0,
EUTRAN, UTRAN,
, UTRAN(UTRAN), UTRAN~1, None None
GERAN
GERAN(GERAN) GERAN~2

BLACK_LIST(BLAC
K_LIST),
BLACK_LIST~0, BLACK_LIST,
GREY_LIST(GREY BLACK_LIST(BLAC
GREY_LIST~1, None GREY_LIST,
_LIST), K_LIST)
WHITE_LIST~2 WHITE_LIST
WHITE_LIST(WHIT
E_LIST)

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~7 N/A None 0~7 0

-140~-43 N/A dBm -140~-43 -105

-40~-6 N/A 0.5dB -20~-3 -20

0~35 N/A None 0~35 None

0~255 N/A None 0~255 None

0~255 N/A None 0~255 None

0~65535 N/A None 0~65535 None

0~65535 N/A None 0~65535 None

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE None
ENABLE(Enable) ENABLE~1

DISABLE(Disable), DISABLE~0,
None DISABLE, ENABLE None
ENABLE(Enable) ENABLE~1

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535
1~7 N/A None 1~7 1

-31~66 N/A dBm -31~66 0

-35~62 N/A dBm -35~62 0

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 5

0~100 N/A None 0~1, step:0.01 5

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 10

0~100 N/A None 0~1, step:0.01 20

0~100 N/A None 0~1, step:0.01 20

0~100 N/A None 0~1, step:0.01 20

0~100 N/A % 0~100 0

1~10000 N/A None 1~10000 200

1~10080 N/A min 1~10080 1440

r1(1), r2(2), r4(4),

r1~0, r2~1, r4~2,
r8(8), r16(16), r1, r2, r4, r8, r16,
r8~3, r16~4, r32~5, None r4(4)
r32(32), r64(64), r32, r64, Infinity
r64~6, Infinity~7
Infinity(Infinity)

120ms~0,
240ms~1,
480ms~2,
120ms, 240ms, 640ms~3, 120ms, 240ms,
480ms, 640ms, 1024ms~4, 480ms, 640ms,
1024ms, 2048ms, 2048ms~5, 1024ms, 2048ms,
None 5120ms
5120ms, 10240ms, 5120ms~6, 5120ms, 10240ms,
1min, 6min, 12min, 10240ms~7, 1min, 6min, 12min,
30min, 60min 1min~8, 6min~9, 30min, 60min
12min~10,
30min~11,
60min~12
1~10080 N/A min 1~10080 60

-130~-70 N/A dBm -130~-70 -102

1~200 N/A None 1~200 5

1~200 N/A None 1~200 5

1~10000 N/A None 1~10000 20

1~10000 N/A None 1~10000 20

FREE(FREE),
FREE~0, FREE,
CONTROLLED(CO None FREE(FREE)
CONTROLLED~1 CONTROLLED
NTROLLED)

1~50400 N/A min 1~50400 10080

1~10000 N/A None 1~10000 200

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 14:00:00

00:00:00~23:59:59 N/A None 00:00:00~23:59:59 15:00:00

-120~-25 N/A dBm -120~-25 -106

-110~-48 N/A dBm -110~-48 -103

-63~0 N/A 0.5dB -31.5~0 -30

-63~0 N/A 0.5dB -31.5~0 -16

0~100 N/A % 0~100 40

0~10000 N/A None 0~10000 0

NCL_MODE(NCL
Mode),
NCL_NRT_MODE( NCL_MODE~0, NCL_MODE,
NCL_MODE(NCL
NCL and NRT NCL_NRT_MODE~ None NCL_NRT_MODE,
Mode)
Mode), 1, NRT_MODE~2 NRT_MODE
NRT_MODE(NRT_
MODE)
BASED_NCL(BASE
BASED_NCL~0,
D_NCL), BASED_NCL, BASED_NCL(BASE
NOT_BASED_NCL None
NOT_BASED_NCL( NOT_BASED_NCL D_NCL)
~1
NOT_BASED_NCL)
CA_UE_CAP(CA
UE Capability),
CA_UE_CAP~0, CA_UE_CAP,
CA_UE_CARRIER_
CA_UE_CARRIER_ CA_UE_CARRIER_ CA_UE_CAP(CA
NUM(CA UE Carrier None
NUM~1, NUM, UE Capability)
Number),
ANR_UE_CAP~2 ANR_UE_CAP
ANR_UE_CAP(AN
R UE Capability)
PERMIT_HO(PER
MIT_HO), PERMIT_HO~0, PERMIT_HO, PERMIT_HO(PER
None
FORBID_HO(FORB FORBID_HO~1 FORBID_HO MIT_HO)
ID_HO)
 DISABLE~0,
DISABLE, ENABLE None DISABLE, ENABLE ENABLE
ENABLE~1

NO_CHECK(NO_C
HECK), NO_CHECK~0, NO_CHECK, NO_CHECK(NO_C
None
PCI_CHECK(PCI_ PCI_CHECK~1 PCI_CHECK HECK)
CHECK)
BASED_NCL(BASE
BASED_NCL~0,
D_NCL), BASED_NCL, BASED_NCL(BASE
NOT_BASED_NCL None
NOT_BASED_NCL( NOT_BASED_NCL D_NCL)
~1
NOT_BASED_NCL)
BASED_NCL(BASE
BASED_NCL~0,
D_NCL), BASED_NCL, BASED_NCL(BASE
NOT_BASED_NCL None
NOT_BASED_NCL( NOT_BASED_NCL D_NCL)
~1
NOT_BASED_NCL)
UTRAN_EVENT_A UTRAN_EVENT_A UTRAN_EVENT_A UTRAN_EVENT_A
NR_WITH_VOIP_M NR_WITH_VOIP_M NR_WITH_VOIP_M NR_WITH_VOIP_M
ODE, ODE~0, ODE, ODE:On,
GERAN_EVENT_A GERAN_EVENT_A GERAN_EVENT_A GERAN_EVENT_A
NR_WITH_VOIP_M NR_WITH_VOIP_M None NR_WITH_VOIP_M NR_WITH_VOIP_M
ODE, ODE~1, ODE, ODE:On,
CDMA_EVENT_AN CDMA_EVENT_AN CDMA_EVENT_AN CDMA_EVENT_AN
R_WITH_VOIP_MO R_WITH_VOIP_MO R_WITH_VOIP_MO R_WITH_VOIP_MO
DE DE~2 DE DE:On
2~16 N/A 0.5s 1~8 4

2~16 N/A 0.5s 1~8 8

EUTRAN_DELRED
UNDANCENCELL(
EUTRAN_DELRED
UNDANCENCELL),
UTRAN_DELREDU EUTRAN_DELRED
NDANCENCELL(U UNDANCENCELL:
EUTRAN_DELRED
TRAN_DELREDUN EUTRAN_DELRED Off,
UNDANCENCELL~
DANCENCELL), UNDANCENCELL, UTRAN_DELREDU
0,
GERAN_DELREDU UTRAN_DELREDU NDANCENCELL:Of
UTRAN_DELREDU
NDANCENCELL(G NDANCENCELL, f,
NDANCENCELL~1,
ERAN_DELREDUN GERAN_DELREDU GERAN_DELREDU
GERAN_DELREDU
DANCENCELL), NDANCENCELL, NDANCENCELL:Of
NDANCENCELL~2, None
UTRAN_DELERRO UTRAN_DELERRO f,
UTRAN_DELERRO
RNCELL(UTRAN_ RNCELL, UTRAN_DELERRO
RNCELL~3,
DELERRORNCELL GERAN_DELERRO RNCELL:Off,
GERAN_DELERRO
), RNCELL, GERAN_DELERRO
RNCELL~4,
GERAN_DELERRO EUTRAN_DELCEL RNCELL:Off,
EUTRAN_DELCEL
RNCELL(GERAN_ LERRORNCELL EUTRAN_DELCEL
LERRORNCELL~5
DELERRORNCELL LERRORNCELL:Of
), f
EUTRAN_DELCEL
LERRORNCELL(E
UTRAN_DELCELL
ERRORNCELL)

EutranCtrlOptMode(
EutranCtrlOptMode EutranCtrlOptMode:
EutranCtrlOptMode)
~0, On,
, EutranCtrlOptMode,
UtranCtrlOptMode~ UtranCtrlOptMode:
UtranCtrlOptMode( None UtranCtrlOptMode,
1, On,
UtranCtrlOptMode), GeranCtrlOptMode
GeranCtrlOptMode GeranCtrlOptMode:
GeranCtrlOptMode(
~2 On
GeranCtrlOptMode)
0~10000 N/A None 0~10000 0

0~10000 N/A None 0~10000 0

1~50400 N/A min 1~50400 10080

1~10000 N/A None 1~10000 1

1~10000 N/A None 1~10000 1

10~50400 N/A min 10~50400 10080

1~50400 N/A min 1~50400 1440

0~10000 N/A None 0~10000 20

0~35 N/A None 0~35 None

Andrew(Andrew),
TongYu(TongYu),
HaiTian(HaiTian), Andrew~0,
COMBA(COMBA), TongYu~1,
TTCOM(TTCOM), HaiTian~2,
MOBI(MOBI), COMBA~3, Andrew, TongYu,
GUOXIN(GUOXIN), TTCOM~4, HaiTian, COMBA,
JIESAI(JIESAI), MOBI~5, TTCOM, MOBI,
OtherManufacturer GUOXIN~6, GUOXIN, JIESAI,
1(OtherManufactur JIESAI~7, OtherManufacturer OtherManufacturer
er1), OtherManufacturer None 1, 1(OtherManufactur
OtherManufacturer 1~8, OtherManufacturer er1)
2(OtherManufactur OtherManufacturer 2,
er2), 2~9, OtherManufacturer
OtherManufacturer OtherManufacturer 3, HuaweiAgisson,
3(OtherManufactur 3~10, ShengLu, HongXin
er3), HuaweiAgisson~11,
HuaweiAgisson(Hu ShengLu~12,
aweiAgisson), HongXin~13
ShengLu(ShengLu)
, HongXin(HongXin)

0 N/A None 0 0

60~254 N/A None 60~254 None

0 N/A None 0 0

0~128 characters N/A None 0~128 characters NULL(empty string)

0~15 N/A degree 0~15 0

30,65,90,360 N/A degree 30,65,90,360 30

33~64 N/A None 33~64 33

INTELLIGENT, INTELLIGENT~1, INTELLIGENT,

None INTELLIGENT
DISTRIBUTED DISTRIBUTED~2 DISTRIBUTED

-90~90 N/A degree -90~90 0

SINGLE~1,
SINGLE, DUAL None SINGLE, DUAL None
DUAL~2

0~360 N/A degree 0~360 None

FOURPORTS(Four
Ports), FOURPORTS~0, FOURPORTS,
None None
EIGHTPORTS(Eigh EIGHTPORTS~1 EIGHTPORTS
t Ports)

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

0~100 N/A None 0~1, step:0.01 None

-180~180 N/A degree -180~180 None

65535~429496729 65535~429496729
N/A None None
5 5

1~50400 N/A min 1~50400 10080

1~1000000 N/A None 1~1000000 200

0~100 N/A % 0~100 98

0~100 N/A % 0~100 98

0~100 N/A % 0~100 98

FREE(FREE),
FREE~0, FREE, CONTROLLED(CO
CONTROLLED(CO None
CONTROLLED~1 CONTROLLED NTROLLED)
NTROLLED)
1~63 N/A None 1~63 None

0~64 characters N/A None 0~64 None

OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

0~127 N/A None 0~127 None

0~65535 N/A s 0~65535 0

0~127,255 N/A None 0~127,255 255

0~60 N/A s 0~60 5

0~60 N/A s 0~60 3

0~127 N/A None 0~127 None

VIDEO(VIDEO),
VIDEO~0, VIDEO,
DOWNLOAD(DOW
DOWNLOAD~1, None DOWNLOAD, OTHER(OTHER)
NLOAD),
OTHER~2 OTHER
OTHER(OTHER)
QUEUE0(QUEUE0)
,
QUEUE1(QUEUE1)
,
QUEUE0~0,
QUEUE2(QUEUE2) QUEUE0,
QUEUE1~1,
, QUEUE1,
QUEUE2~2,
QUEUE3(QUEUE3) QUEUE2,
QUEUE3~3,
, None QUEUE3, QUEUE0(QUEUE0)
QUEUE4~4,
QUEUE4(QUEUE4) QUEUE4,
QUEUE5~5,
, QUEUE5,
QUEUE6~6,
QUEUE5(QUEUE5) QUEUE6, QUEUE7
QUEUE7~7
,
QUEUE6(QUEUE6)
,
QUEUE7(QUEUE7)

0~4294967295 N/A Kbit/s 0~4294967295 0

0~4294967295 N/A Kbit/s 0~4294967295 0

0~35 N/A None 0~35 None

FDD(FDD),
TDD_SAME_SA(Sa
me Subframe
FDD~0, FDD,
Assignment in
TDD_SAME_SA~1, None TDD_SAME_SA, FDD(FDD)
TDD),
TDD_DIFF_SA~2 TDD_DIFF_SA
TDD_DIFF_SA(Diff
erent Subframe
Assignment in TDD)
FDD(FDD),
FDD~0, TDD~1, FDD, TDD,
TDD(TDD), None FDD(FDD)
FDDTDD~2 FDDTDD
FDDTDD(FDDTDD)

0~35 N/A None 0~35 None

0~255 N/A None 0~255 None

0~1048575 N/A None 0~1048575 None

0~7 N/A None 0~7 0

-140~-43 N/A dBm -140~-43 -105

-40~-6 N/A 0.5dB -20~-3 -20

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE,
None None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE,
None None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE,
None None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE,
None None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE
True) 1
BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE,
None None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE
True) 1

BOOLEAN_FALSE( BOOLEAN_FALSE
False), ~0, BOOLEAN_FALSE, BOOLEAN_FALSE(
None
BOOLEAN_TRUE( BOOLEAN_TRUE~ BOOLEAN_TRUE False)
True) 1

2000-01- 2000-01-
01T00:00:00+00:00 01T00:00:00+00:00 2000-01-
N/A None
~2099-12- ~2099-12- 01T00:00:00+00:00
31T23:59:59+00:00 31T23:59:59+00:00

1~365 N/A day 1~365 1

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

RSRP_DL(Downlin
k RSRP), RSRP_DL~0, RSRP_DL, RSRP_UL(Uplink
None
RSRP_UL(Uplink RSRP_UL~1 RSRP_UL RSRP)
RSRP)

STATIC_CONFIG(S
tatic Config), STATIC_CONFIG~
STATIC_CONFIG,
DYNAMIC_PARTITI 0, STATIC_CONFIG(S
None DYNAMIC_PARTITI
ON_CONFIG(Dyna DYNAMIC_PARTITI tatic Config)
ON_CONFIG
mic Partition ON_CONFIG~1
Config)
1~20 N/A s 1~20 5

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

0~100 N/A % 0~100 5

2~10 N/A ms 2~10 7

1~25 N/A None 1~25 1

0~100 N/A % 0~100 70

TddCspcMacroMicr
TddCspcMacroMicr TddCspcMacroMicr TddCspcMacroMicr
oSwitch(TddCspcM None
oSwitch~0 oSwitch oSwitch:Off
acroMicroSwitch)

0~9 N/A None 0~9 None

Valid IP address N/A None Valid IP address None

0~65535 N/A None 0~65535 0

NONE(Not_Check),
UDP(Check_Wheth
NONE~0, UDP~1,
er_UDP), None NONE, UDP, TCP NONE(Not_Check)
TCP~2
TCP(Check_Wheth
er_TCP)

0~46589,54436~65 0~46589,54436~65
N/A None None
535 535

0~503 N/A None 0~503 None

1~504 N/A None 1~504 1

Cdma1xRttCsfbSwit Cdma1xRttCsfbSwit
Cdma1xRttService Cdma1xRttCsfbSwit
ch~4, ch,
HoSwitch(Cdma200 ch:Off,
UtranServiceHoSwit UtranServiceHoSwit
01xRttServiceHoSw UtranServiceHoSwit
ch~5, ch,
itch), ch:Off,
GeranServiceHoSw GeranServiceHoSw
UlQualityInterRATH GeranServiceHoSw
itch~6, itch,
oSwitch(UlQualityIn itch:Off,
CdmaHrpdServiceH CdmaHrpdServiceH
terRATHoSwitch), CdmaHrpdServiceH
oSwitch~7, oSwitch,
InterPlmnHoSwitch( oSwitch:Off,
Cdma1xRttService Cdma1xRttService
InterPlmnHoSwitch) Cdma1xRttService
HoSwitch~8, HoSwitch,
, HoSwitch:Off,
UlQualityInterRATH UlQualityInterRATH
UtranFlashCsfbSwit UlQualityInterRATH
oSwitch~9, oSwitch,
ch(UtranFlashCsfb oSwitch:Off,
InterPlmnHoSwitch InterPlmnHoSwitch,
Switch), InterPlmnHoSwitch:
~10, UtranFlashCsfbSwit
GeranFlashCsfbSwi Off,
UtranFlashCsfbSwit ch,
tch(GeranFlashCsfb UtranFlashCsfbSwit
ch~11, GeranFlashCsfbSwi
Switch), ch:Off,
GeranFlashCsfbSwi tch,
ServiceBasedInterF GeranFlashCsfbSwi
tch~12, ServiceBasedInterF
reqHoSwitch(Servic tch:Off,
ServiceBasedInterF reqHoSwitch,
eBasedInterFreqHo None ServiceBasedInterF
reqHoSwitch~13, UlQualityInterFreqH
Switch), reqHoSwitch:Off,
UlQualityInterFreqH oSwitch,
UlQualityInterFreqH UlQualityInterFreqH
oSwitch~14, CsfbAdaptiveBlindH
oSwitch(UlQualityIn oSwitch:Off,
CsfbAdaptiveBlindH oSwitch,
terFreqHoSwitch), CsfbAdaptiveBlindH
oSwitch~15, UtranCsfbSteeringS
CsfbAdaptiveBlindH oSwitch:Off,
UtranCsfbSteeringS witch,
oSwitch(CsfbAdapti UtranCsfbSteeringS
witch~16, GeranCsfbSteering
veBlindHoSwitch), witch:Off,
GeranCsfbSteering Switch,
UtranCsfbSteeringS GeranCsfbSteering
Switch~17, CSFBLoadInfoSwit
witch(UtranCsfbSte Switch:Off,
CSFBLoadInfoSwit ch,
eringSwitch), CSFBLoadInfoSwit
ch~18, Cdma1XrttEcsfbSwi
GeranCsfbSteering ch:Off,
Cdma1XrttEcsfbSwi tch,
Switch(GeranCsfbS Cdma1XrttEcsfbSwi
tch~19, EmcBlindHoA1Swit
teeringSwitch), tch:Off,
EmcBlindHoA1Swit ch,
CSFBLoadInfoSwit EmcBlindHoA1Swit
ch~20, EmcInterFreqBlind
ch(CSFBLoadInfoS ch:Off,
EmcInterFreqBlind HoSwitch,
witch), EmcInterFreqBlind
HoSwitch~21, EPlmnSwitch,
Cdma1XrttEcsfbSwi HoSwitch:Off,
EPlmnSwitch~22, ServiceReqInterFre
tch(Cdma1XrttEcsfb EPlmnSwitch:Off,
ServiceReqInterFre qHoSwitch,
tranPsHoSwitch), h~1, EutranVoipCapSwit h:Off,
GeranPsHoSwitch( GeranVoipCapSwitc ch, GeranVoipCapSwitc
GeranPsHoSwitch), h~2, UtranVoipCapSwitc h:Off,
CdmaHrpdNonOpti Cdma1xRttVoipCap h, Cdma1xRttVoipCap
misedHoSwitch(Cd Switch~3, GeranVoipCapSwitc Switch:Off,
maHrpdNonOptimis UtranPsHoSwitch~ h, UtranPsHoSwitch:O
edHoSwitch), 4, Cdma1xRttVoipCap ff,
CdmaHrpdOptimise GeranPsHoSwitch~ Switch, GeranPsHoSwitch:
dHoSwitch(CdmaHr 5, UtranPsHoSwitch, Off,
pdOptimisedHoSwit CdmaHrpdNonOpti GeranPsHoSwitch, CdmaHrpdNonOpti
ch), misedHoSwitch~6, CdmaHrpdNonOpti misedHoSwitch:Off,
GeranNaccSwitch( CdmaHrpdOptimise misedHoSwitch, CdmaHrpdOptimise
GeranNaccSwitch), dHoSwitch~7, CdmaHrpdOptimise dHoSwitch:Off,
GeranCcoSwitch(G GeranNaccSwitch~ dHoSwitch, GeranNaccSwitch:
eranCcoSwitch), 8, GeranNaccSwitch, Off,
UtranSrvccSwitch(U GeranCcoSwitch~9, GeranCcoSwitch, GeranCcoSwitch:Of
tranSrvccSwitch), UtranSrvccSwitch~ UtranSrvccSwitch, f,
GeranSrvccSwitch( 10, GeranSrvccSwitch, UtranSrvccSwitch:O
GeranSrvccSwitch), GeranSrvccSwitch~ None Cdma1xRttSrvccSw ff,
Cdma1xRttSrvccSw 11, itch, GeranSrvccSwitch:
itch(Cdma1xRttSrvc Cdma1xRttSrvccSw UtranRedirectSwitc Off,
cSwitch), itch~12, h, Cdma1xRttSrvccSw
UtranRedirectSwitc UtranRedirectSwitc GeranRedirectSwitc itch:Off,
h(UtranRedirectSwit h~13, h, UtranRedirectSwitc
ch), GeranRedirectSwitc CdmaHrpdRedirect h:Off,
GeranRedirectSwitc h~14, Switch, GeranRedirectSwitc
h(GeranRedirectSw CdmaHrpdRedirect Cdma1xRttRedirect h:Off,
itch), Switch~15, Switch, CdmaHrpdRedirect
CdmaHrpdRedirect Cdma1xRttRedirect BlindHoSwitch, Switch:Off,
Switch(CdmaHrpdR Switch~16, LcsSrvccSwitch, Cdma1xRttRedirect
edirectSwitch), BlindHoSwitch~17, AutoGapSwitch, Switch:Off,
Cdma1xRttRedirect LcsSrvccSwitch~18 UeVoipOnHspaCap BlindHoSwitch:Off,
Switch(Cdma1xRtt , Switch, LcsSrvccSwitch:Off,
RedirectSwitch), AutoGapSwitch~19, UtranFddB1CapSwi AutoGapSwitch:Off,
BlindHoSwitch(Blin UeVoipOnHspaCap tch, UeVoipOnHspaCap
dHoSwitch), Switch~20, CdmaHrpdNonOpt Switch:Off,
LcsSrvccSwitch(Lcs UtranFddB1CapSwi MeaHoSwitch UtranFddB1CapSwi
DlIcicSwitch_OFF_ DlIcicSwitch_OFF_ DlIcicSwitch_OFF_
ENUM, ENUM~0, ENUM,
DlIcicDynamicSwitc DlIcicDynamicSwitc DlIcicDynamicSwitc DlIcicSwitch_OFF_
None
h_ON_ENUM, h_ON_ENUM~1, h_ON_ENUM, ENUM
DlIcicStaticSwitch_ DlIcicStaticSwitch_ DlIcicStaticSwitch_
ON_ENUM ON_ENUM~2 ON_ENUM
itch), IntraRatEventAnrS IntraRatEventAnrS IntraRatEventAnrS
GeranEventAnrSwit witch~0, witch, witch:Off,
ch(GeranEventAnr IntraRatFastAnrSwit IntraRatFastAnrSwit IntraRatFastAnrSwit
Switch), ch~1, ch, ch:Off,
UtranFastAnrSwitch IntraRatAnrAutoDel IntraRatAnrAutoDel IntraRatAnrAutoDel
(UtranFastAnrSwitc Switch~2, Switch, Switch:On,
h), UtranEventAnrSwitc UtranEventAnrSwitc UtranEventAnrSwitc
GeranFastAnrSwitc h~3, h, h:Off,
h(GeranFastAnrSwi GeranEventAnrSwit GeranEventAnrSwit GeranEventAnrSwit
tch), ch~4, ch, ch:Off,
CdmaFastAnrSwitc UtranFastAnrSwitch UtranFastAnrSwitch UtranFastAnrSwitch
h(CdmaFastAnrSwit ~5, , :Off,
ch), GeranFastAnrSwitc GeranFastAnrSwitc GeranFastAnrSwitc
UtranAutoNrtDelete h~6, h, h:Off,
Switch(UtranAutoNr CdmaFastAnrSwitc CdmaFastAnrSwitc CdmaFastAnrSwitc
tDeleteSwitch), h~7, h, h:Off,
GeranAutoNrtDelet UtranAutoNrtDelete UtranAutoNrtDelete UtranAutoNrtDelete
eSwitch(GeranAuto Switch~8, Switch, Switch:On,
NrtDeleteSwitch), GeranAutoNrtDelet GeranAutoNrtDelet GeranAutoNrtDelet
None
CdmaAutoNrtDelete eSwitch~9, eSwitch, eSwitch:On,
Switch(CdmaAutoN CdmaAutoNrtDelete CdmaAutoNrtDelete CdmaAutoNrtDelete
rtDeleteSwitch), Switch~10, Switch, Switch:On,
ExtendIntraRatAnrS ExtendIntraRatAnrS ExtendIntraRatAnrS ExtendIntraRatAnrS
witch(ExtendIntraR witch~11, witch, witch:Off,
atAnrSwitch), CdmaEventAnrSwit CdmaEventAnrSwit CdmaEventAnrSwit
CdmaEventAnrSwit ch~12, ch, ch:Off,
ch(CdmaEventAnrS MlbBasedEventAnr MlbBasedEventAnr MlbBasedEventAnr
witch), Switch~13, Switch, Switch:Off,
MlbBasedEventAnr IntraRatNoHoSetAn IntraRatNoHoSetAn IntraRatNoHoSetAn
Switch(MlbBasedEv rSwitch~14, rSwitch, rSwitch:Off,
entAnrSwitch), IntraRatDoubleThd IntraRatDoubleThd IntraRatDoubleThd
IntraRatNoHoSetAn AnrSwitch~15, AnrSwitch, AnrSwitch:Off,
rSwitch(IntraRatNo ServiceBasedEvent ServiceBasedEvent ServiceBasedEvent
HoSetAnrSwitch), AnrSwitch~16, AnrSwitch, AnrSwitch:Off,
IntraRatDoubleThd ServiceReqEventA ServiceReqEventA ServiceReqEventA
AnrSwitch(IntraRat nrSwitch~17, nrSwitch, nrSwitch:Off,
DoubleThdAnrSwitc IntraRatEnhancedE IntraRatEnhancedE IntraRatEnhancedE
h), ventAnrSwitch~18 ventAnrSwitch ventAnrSwitch:Off
 LoadBasedSwitch~ LoadBasedSwitch:
LoadBasedSwitch, LoadBasedSwitch,
0, Off,
GeranFlashRedirect GeranFlashRedirect
GeranFlashRedirect GeranFlashRedirect
Switch, None Switch,
Switch~1, Switch:Off,
UtranFlashRedirect UtranFlashRedirect
UtranFlashRedirect UtranFlashRedirect
Switch Switch
Switch~2 Switch:Off
IntraFreqMroSwitch
(IntraFreqMroAlgoS
witch),
InterFreqMroSwitch
(InterFreqMroAlgoS
IntraFreqMroSwitch
witch), IntraFreqMroSwitch
IntraFreqMroSwitch :Off,
UtranMroSwitch(Utr ~0,
, InterFreqMroSwitch
anMroSwitch), InterFreqMroSwitch
InterFreqMroSwitch :Off,
GeranMroSwitch(G ~1,
, UtranMroSwitch, UtranMroSwitch:Off
eranMroSwitch), UtranMroSwitch~2,
GeranMroSwitch, ,
UEMroSwitch(UeMr GeranMroSwitch~3,
UEMroSwitch, GeranMroSwitch:Of
oAlgoSwitch), UEMroSwitch~4,
IntraFreqReselOptS f, UEMroSwitch:Off,
IntraFreqReselOptS IntraFreqReselOptS
witch, IntraFreqReselOptS
witch(IntraFreqRes witch~5, None
UtranUnnecHoOptS witch:Off,
elOptSwitch), UtranUnnecHoOptS
witch, UtranUnnecHoOptS
UtranUnnecHoOptS witch~6,
GeranUnnecHoOpt witch:Off,
witch(UtranUnnecH GeranUnnecHoOpt
Switch, GeranUnnecHoOpt
oOptSwitch), Switch~7,
IntraRatCallbackSw Switch:Off,
GeranUnnecHoOpt IntraRatCallbackSw
tich, IntraRatCallbackSw
Switch(GeranUnnec tich~8,
UnnecHoOptWithou tich:Off,
HoOptSwitch), UnnecHoOptWithou
tRIM UnnecHoOptWithou
IntraRatCallbackSw tRIM~9
tRIM:Off
tich(IntraRatCallbac
kSwtich),
UnnecHoOptWithou
tRIM(UnnecHoOpt
WithoutRIM)

OFF( Off), ON( On) OFF~0, ON~1 None OFF, ON OFF( Off)

TpeAlgoSwitch(Tpe
TpeAlgoSwitch~0 None TpeAlgoSwitch TpeAlgoSwitch:Off
AlgoSwitch)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off),
STATIC(Static), OFF~0, STATIC~1, OFF, STATIC,
None OFF(Off)
DYNAMIC(Dynamic DYNAMIC~2 DYNAMIC
)
OtdoaSwitch(OTDO
A switch), OtdoaSwitch~0, OtdoaSwitch, OtdoaSwitch:Off,
EcidInterFreqMeas EcidInterFreqMeas None EcidInterFreqMeas EcidInterFreqMeas
Switch(EcidInterFre Switch~1 Switch Switch:Off
qMeasSwitch)
UlUuFlowCtrlSwitch
UlUuFlowCtrlSwitch UlUuFlowCtrlSwitch
(UU flow control None UlUuFlowCtrlSwitch
~0 :Off
switch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

SymbolShutdownS
SymbolShutdownS SymbolShutdownS SymbolShutdownS
witch(Symbol None
witch~0 witch witch:Off
shutdown switch)
UTRAN_RIM_SWIT
CH(UTRAN RIM UTRAN_RIM_SWIT UTRAN_RIM_SWIT UTRAN_RIM_SWIT
Switch), CH~0, CH, CH:Off,
None
GERAN_RIM_SWI GERAN_RIM_SWI GERAN_RIM_SWI GERAN_RIM_SWI
TCH(GERAN RIM TCH~1 TCH TCH:Off
Switch)

NBSLTEPLMNRou
ndSwitch(NBSLTEP
LMNRoundSwitch),
NBSLTERANSharin NBSLTEPLMNRou NBSLTEPLMNRou NBSLTEPLMNRou
gSwitch(NBSLTER ndSwitch~0, ndSwitch, ndSwitch:Off,
ANSharingSwitch), NBSLTERANSharin NBSLTERANSharin NBSLTERANSharin
NBSUTRANRANSh gSwitch~1, gSwitch, gSwitch:Off,
None
aringSwitch(NBSUT NBSUTRANRANSh NBSUTRANRANSh NBSUTRANRANSh
RANRANSharingS aringSwitch~2, aringSwitch, aringSwitch:Off,
witch), NBSGERANRANSh NBSGERANRANSh NBSGERANRANSh
NBSGERANRANSh aringSwitch~3 aringSwitch aringSwitch:Off
aringSwitch(NBSG
ERANRANSharing
Switch)
UtranFreqLayerMea
sSwitch(UtranFreqL
UtranFreqLayerMea UtranFreqLayerMea UtranFreqLayerMea
ayerMeasSwitch),
sSwitch~0, sSwitch, sSwitch:Off,
UtranFreqLayerBlin
UtranFreqLayerBlin UtranFreqLayerBlin UtranFreqLayerBlin
dSwitch(UtranFreqL None
dSwitch~1, dSwitch, dSwitch:Off,
ayerBlindSwitch),
UtranSrvccSteering UtranSrvccSteering UtranSrvccSteering
UtranSrvccSteering
Switch~2 Switch Switch:Off
Switch(UtranSrvccS
teeringSwitch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

VQM_ALGO_SWIT VQM_ALGO_SWIT VQM_ALGO_SWIT

CH_OFF(Disable), CH_OFF~0, CH_OFF, VQM_ALGO_SWIT
None
VQM_ALGO_SWIT VQM_ALGO_SWIT VQM_ALGO_SWIT CH_OFF(Disable)
CH_ON(Enable) CH_ON~1 CH_ON
IntraOpUeNumPree
mptSwitch(IntraOp
UeNumPreemptSwi IntraOpUeNumPree IntraOpUeNumPree IntraOpUeNumPree
tch), mptSwitch~0, mptSwitch, mptSwitch:Off,
None
InterOpUeNumPree InterOpUeNumPree InterOpUeNumPree InterOpUeNumPree
mptSwitch(InterOp mptSwitch~1 mptSwitch mptSwitch:Off
UeNumPreemptSwi
tch)

UtranSepOpMobility
UtranSepOpMobility UtranSepOpMobility UtranSepOpMobility
Switch(UtranSepOp None
Switch~0 Switch Switch:Off
MobilitySwitch)
UlJointReceptionOv
erBBUsSwitch(UlJoi
ntReceptionOverBB
UlJointReceptionOv UlJointReceptionOv UlJointReceptionOv
UsSwitch),
erBBUsSwitch~0, erBBUsSwitch, erBBUsSwitch:Off,
FreqCfgCaOverBB
FreqCfgCaOverBB FreqCfgCaOverBB FreqCfgCaOverBB
UsSwitch(FreqCfgC
UsSwitch~1, UsSwitch, UsSwitch:Off,
aOverBBUsSwitch), None
UlJROverRelaxedB UlJROverRelaxedB UlJROverRelaxedB
UlJROverRelaxedB
HSw~2, HSw, HSw:Off,
HSw(UlJROverRela
UlSfnJROverBBUs UlSfnJROverBBUs UlSfnJROverBBUs
xedBHSw),
Switch~3 Switch Switch:Off
UlSfnJROverBBUs
Switch(UlSfnJROve
rBBUsSwitch)

LcsInterRatMeasSw
LcsInterRatMeasSw LcsInterRatMeasSw LcsInterRatMeasSw
itch(LcsInterRatMea None
itch~0 itch itch:Off
sSwitch)
ReduceInvalidA1A2
RptSigSwitch(Redu
ceInvalidA1A2RptSi
gSwitch),
MultiQciHoExecOpt ReduceInvalidA1A2 ReduceInvalidA1A2 ReduceInvalidA1A2
Switch(MultiQciHoE RptSigSwitch~0, RptSigSwitch, RptSigSwitch:Off,
xecOptSwitch), MultiQciHoExecOpt MultiQciHoExecOpt MultiQciHoExecOpt
ReduceInvalidFreq Switch~1, Switch, Switch:Off,
PriHoSwitch(Reduc ReduceInvalidFreq ReduceInvalidFreq ReduceInvalidFreq
eInvalidFreqPriHoS PriHoSwitch~2, PriHoSwitch, PriHoSwitch:Off,
None
witch), AddA2MeasIfQciAd AddA2MeasIfQciAd AddA2MeasIfQciAd
AddA2MeasIfQciAd jSwitch~3, jSwitch, jSwitch:Off,
jSwitch(AddA2Meas InterFreqHoA2OptS InterFreqHoA2OptS InterFreqHoA2OptS
IfQciAdjSwitch), witch~4, witch, witch:Off,
InterFreqHoA2OptS McUtranNcellNumO McUtranNcellNumO McUtranNcellNumO
witch(InterFreqHoA ptSwtich~5 ptSwtich ptSwtich:Off
2OptSwitch),
McUtranNcellNumO
ptSwtich(McUtranN
cellNumOptSwtich)
UECapRprtAbnorm
alCtrlSwitch(UECap
RprtAbnormalCtrlS
witch),
ApCqiRptAbnormal UECapRprtAbnorm UECapRprtAbnorm
UECapRprtAbnorm
CtrlSwitch(ApCqiRp alCtrlSwitch~0, alCtrlSwitch:Off,
alCtrlSwitch,
tAbnormalCtrlSwitc ApCqiRptAbnormal ApCqiRptAbnormal
ApCqiRptAbnormal
h), CtrlSwitch~1, CtrlSwitch:Off,
CtrlSwitch,
UeInterRatMeasCtrl UeInterRatMeasCtrl UeInterRatMeasCtrl
UeInterRatMeasCtrl
Switch(UeInterRatM Switch~2, Switch:Off,
Switch,
easCtrlSwitch), VoipExProtSwitch~ VoipExProtSwitch:O
None VoipExProtSwitch,
VoipExProtSwitch(V 3, ff,
UeSRSAntSelectCtr
oipExProtSwitch), UeSRSAntSelectCtr UeSRSAntSelectCtr
lSwitch,
UeSRSAntSelectCtr lSwitch~4, lSwitch:Off,
ApCqiAndAckAbnC
lSwitch(UeSRSAnt ApCqiAndAckAbnC ApCqiAndAckAbnC
trlSwitch,
SelectCtrlSwitch), trlSwitch~5, trlSwitch:Off,
CaCqiAndAckAbnC
ApCqiAndAckAbnC CaCqiAndAckAbnC CaCqiAndAckAbnC
trlSwitch
trlSwitch(ApCqiAnd trlSwitch~6 trlSwitch:Off
AckAbnCtrlSwitch),
CaCqiAndAckAbnC
trlSwitch(CaCqiAnd
AckAbnCtrlSwitch)
GeranBlindNcellOpt GeranBlindNcellOpt GeranBlindNcellOpt GeranBlindNcellOpt
Switch, Switch~0, Switch, Switch:Off,
None
UtranBlindNcellOpt UtranBlindNcellOpt UtranBlindNcellOpt UtranBlindNcellOpt
Switch Switch~1 Switch Switch:Off

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON ON(On)

ccAnchorSwitch),
SccBlindCfgSwitch(
PdcchOverlapSrch PdcchOverlapSrch
SccBlindCfgSwitch)
SpcSwitch~0, SpcSwitch:On,
,
CaCapbFiltSwitch~ CaCapbFiltSwitch:
FreqCfgSwitch(Freq
1, PdcchOverlapSrch Off,
CfgSwitch),
PccAnchorSwitch~2 SpcSwitch, PccAnchorSwitch:O
SccA2RmvSwitch(S
, CaCapbFiltSwitch, ff,
ccA2RmvSwitch),
SccBlindCfgSwitch PccAnchorSwitch, SccBlindCfgSwitch:
CaTrafficTriggerSwi
~3, SccBlindCfgSwitch, Off,
tch(CaTrafficTrigger
FreqCfgSwitch~4, FreqCfgSwitch, FreqCfgSwitch:Off,
Switch),
SccA2RmvSwitch~ SccA2RmvSwitch, SccA2RmvSwitch:O
HoWithSccCfgSwitc
5, CaTrafficTriggerSwi n,
h(HoWithSccCfgSw
CaTrafficTriggerSwi tch, CaTrafficTriggerSwi
itch),
tch~6, HoWithSccCfgSwitc tch:Off,
SccModA6Switch(S
HoWithSccCfgSwitc h, HoWithSccCfgSwitc
ccModA6Switch),
h~7, SccModA6Switch, h:Off,
GbrAmbrJudgeSwit
SccModA6Switch~8 GbrAmbrJudgeSwit SccModA6Switch:O
ch(GbrAmbrJudgeS
, ch, MtaAlgSwitch, ff,
witch),
GbrAmbrJudgeSwit None RelaxedBackhaulC GbrAmbrJudgeSwit
MtaAlgSwitch(MtaAl
ch~9, aSwitch, ch:On,
gSwitch),
MtaAlgSwitch~10, AdpCaSwitch, MtaAlgSwitch:Off,
RelaxedBackhaulC
RelaxedBackhaulC CaHoControlSwitch RelaxedBackhaulC
aSwitch(RelaxedBa
aSwitch~11, , aSwitch:Off,
ckhaulCaSwitch),
AdpCaSwitch~12, DistributeCloudbbC AdpCaSwitch:Off,
AdpCaSwitch(AdpC
CaHoControlSwitch aSwitch, CaHoControlSwitch
aSwitch),
~13, SccSmartCfgSwitch :Off,
CaHoControlSwitch
DistributeCloudbbC , DistributeCloudbbC
(CaHoControlSwitc
aSwitch~14, IdleModePccAncho aSwitch:Off,
h),
SccSmartCfgSwitch rSwitch, SccSmartCfgSwitch
DistributeCloudbbC
~15, FreqPriBasedHoCa :Off,
aSwitch(DistributeC
IdleModePccAncho FiltSwitch, IdleModePccAncho
loudbbCaSwitch),
rSwitch~16, CaSccSuspendSwit rSwitch:Off,
SccSmartCfgSwitch
FreqPriBasedHoCa ch FreqPriBasedHoCa
(SccSmartCfgSwitc
FiltSwitch~17, FiltSwitch:Off,
h),
CaSccSuspendSwit CaSccSuspendSwit
IdleModePccAncho
ch~18 ch:Off
rSwitch(IdleModePc
cAnchorSwitch),
INTER_FREQ_IDL
INTER_FREQ_IDL
E_MLB_SWITCH(I INTER_FREQ_IDL INTER_FREQ_IDL
None E_MLB_SWITCH:O
NTER_FREQ_IDLE E_MLB_SWITCH~0 E_MLB_SWITCH
ff
_MLB_SWITCH)
BasedSriGapOptS
witch(BasedSriGap
OptSwitch), BasedSriGapOptS BasedSriGapOptS BasedSriGapOptS
L2UBasedHoPolicy witch~0, witch, witch:On,
PenaltySwitch(L2U L2UBasedHoPolicy L2UBasedHoPolicy L2UBasedHoPolicy
None
BasedHoPolicyPen PenaltySwitch~1, PenaltySwitch, PenaltySwitch:Off,
altySwitch), DrxBasedSriGapOp DrxBasedSriGapOp DrxBasedSriGapOp
DrxBasedSriGapOp tSwitch~2 tSwitch tSwitch:On
tSwitch(DrxBasedSr
iGapOptSwitch)
SPECSIGRETRAN
SOPTSWITCH(SP
SPECSIGRETRAN SPECSIGRETRAN SPECSIGRETRAN
ECSIGRETRANSO
SOPTSWITCH~0, SOPTSWITCH, SOPTSWITCH:Off,
PTSWITCH), None
FlowCtrlTriBackoffS FlowCtrlTriBackoffS FlowCtrlTriBackoffS
FlowCtrlTriBackoffS
witch~1 witch witch:Off
witch(FlowCtrlTriBa
ckoffSwitch)
LOADNOTBALANC
ESCHSWITCH(LO LOADNOTBALANC LOADNOTBALANC LOADNOTBALANC
None
ADNOTBALANCES ESCHSWITCH~0 ESCHSWITCH ESCHSWITCH:Off
CHSWITCH)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

TransDropPktsStat
TransDropPktsStat TransDropPktsStat TransDropPktsStat
Switch(TransDropP None
Switch~0 Switch Switch:Off
ktsStatSwitch)

GERAN_SWITCH(
GREAN
Neighboring Cell GERAN_SWITCH~ GERAN_SWITCH:
Ranking Switch), 0, GERAN_SWITCH, Off,
None
UTRAN_SWITCH( UTRAN_SWITCH~ UTRAN_SWITCH UTRAN_SWITCH:
UTRAN 1 Off
Neighboring Cell
Ranking Switch)
OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

L2LoadBalanceSwit
L2LoadBalanceSwit L2LoadBalanceSwit L2LoadBalanceSwit
ch(L2 Load Balance None
ch~0 ch ch:Off
Switch)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

ACHSwitch(ACHSw
ACHSwitch~0 None ACHSwitch ACHSwitch:Off
itch)

OFF(OFF), ON(ON) OFF~0, ON~1 None OFF, ON OFF(OFF)

BaseBandResetSwi
tch(BaseBandReset
Switch), BaseBandResetSwi BaseBandResetSwi BaseBandResetSwi
RFResetSwitch(RF tch~0, tch, tch:On,
ResetSwitch), RFResetSwitch~1, RFResetSwitch, RFResetSwitch:On,
BBPResetDelaySwi BBPResetDelaySwi None BBPResetDelaySwi BBPResetDelaySwi
tch(BBPResetDelay tch~2, tch, tch:On,
Switch), RFResetDelaySwitc RFResetDelaySwitc RFResetDelaySwitc
RFResetDelaySwitc h~3 h h:On
h(RFResetDelaySw
itch)

COLLISION_DETE
CT_SWITCH(COLL
ISION_DETECT_S COLLISION_DETE COLLISION_DETE COLLISION_DETE
WITCH), CT_SWITCH~0, CT_SWITCH, CT_SWITCH:On,
None
CONFUSION_DET CONFUSION_DET CONFUSION_DET CONFUSION_DET
ECT_SWITCH(CO ECT_SWITCH~1 ECT_SWITCH ECT_SWITCH:On
NFUSION_DETEC
T_SWITCH)
DlCaLbAlgoSwitch( DlCaLbAlgoSwitch~ DlCaLbAlgoSwitch:
None DlCaLbAlgoSwitch
DlCaLbAlgoSwitch) 0 Off

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

ADAPTIVE_PROP
ADAPTIVE_PROP ADAPTIVE_PROP ADAPTIVE_PROP
ORTION(ADAPTIV None
ORTION~0 ORTION ORTION:Off
E_PROPORTION)
0~10080 N/A min 0~10080 1440
1~10000 N/A None 1~10000 3
3CC(3CC),
3CC~0, 2CC~1 None 3CC, 2CC 3CC(3CC)
2CC(2CC)

0~99 N/A None 0~99 0

1~100 N/A % 1~100 25

SHARING(Sharing),
SHARING~0, SHARING,
DEDICATE(Dedicat None SHARING(Sharing)
DEDICATE~1 DEDICATE
e)
0~5 N/A None 0~5 None

0~100 N/A % 0~100 0

0~100 N/A % 0~100 0

1~70000 N/A min 1~70000 1440

0~100 N/A % 0~100 99

0~10000 N/A None 0~10000 1000

1~60 N/A s 1~60 1

0~100 N/A % 0~100 5

0~100 N/A % 0~100 60

-140~-44 N/A dBm -140~-44 -116

-140~-44 N/A dBm -140~-44 -116

1~7 N/A None 1~7 5

0~100 N/A % 0~100 5

0~100 N/A % 0~100 2

FREE(FREE),
FREE~0, FREE,
CONTROLLED(CO None FREE(FREE)
CONTROLLED~1 CONTROLLED
NTROLLED)
0~100 N/A % 0~100 95

-140~-44 N/A dBm -140~-44 -115

-141~-43 N/A dBm -141~-43 -118

0~10000 N/A None 0~10000 1000

0~100 N/A % 0~100 70

0~100 N/A % 0~100 70

0~100 N/A % 0~100 10

1~30 N/A None 1~30 30

1~60 N/A s 1~60 3
0~100 N/A % 0~100 10
0~100 N/A % 0~100 20
0~100 N/A % 0~100 20
0~100 N/A s 0~100 2

0~9 N/A None 0~9 None

0~100 N/A % 0~100 50

0~100 N/A % 0~100 50

0~50000 N/A ms 0~50000 500

0~50000 N/A ms 0~50000 5000

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~4294967295 N/A bit/s 0~4294967295 0

1~255 N/A ms 1~255 1

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

1~1460 N/A byte 1~1460 1460

0~261120,275943~ 0~261120,275943~
N/A Ts 0
307200 307200

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

0~20 N/A None 0~20 3

0~65535 N/A None 0~65535 20

0~65535 N/A None 0~65535 80

0~65535 N/A None 0~65535 8080

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

1~255 N/A ms 1~255 100

0~500 N/A None 0~5, step:0.01 300

0~500 N/A None 0~5, step:0.01 200

0~500 N/A None 0~5, step:0.01 100

0~100 N/A % 0~100 10
0~100 N/A % 0~100 5
0~100 N/A None 0~100 2
0~100 N/A None 0~100 1

0~500 N/A None 0~5, step:0.01 400

0~100 N/A % 0~100 20
0~100 N/A % 0~100 15
0~100 N/A % 0~100 10
0~100 N/A % 0~100 30

0~65535 N/A min 0~65535 5

50~100 N/A % 50~100 100

1~65535 N/A min 1~65535 5

49~99 N/A % 49~99 90

arameter0_bit10), ~6, Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit8 RsvdSwPara0_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara0_bit1
arameter0_bit11), RsvdSwPara0_bit9 RsvdSwPara0_bit9:
1,
RsvdSwPara0_bit1 ~8, Off,
RsvdSwPara0_bit1
2(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
2,
arameter0_bit12), 0~9, 0:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara0_bit1
arameter0_bit13), RsvdSwPara0_bit1 RsvdSwPara0_bit1
4,
RsvdSwPara0_bit1 2~11, 2:Off,
RsvdSwPara0_bit1
4(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
5,
arameter0_bit14), 3~12, 3:Off,
RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara0_bit1
arameter0_bit15), RsvdSwPara0_bit1 RsvdSwPara0_bit1
7,
RsvdSwPara0_bit1 5~14, 5:Off,
RsvdSwPara0_bit1
6(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
8,
arameter0_bit16), 6~15, 6:Off,
None RsvdSwPara0_bit1
RsvdSwPara0_bit1 RsvdSwPara0_bit1 RsvdSwPara0_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara0_bit2
arameter0_bit17), RsvdSwPara0_bit1 RsvdSwPara0_bit1
0,
RsvdSwPara0_bit1 8~17, 8:Off,
RsvdSwPara0_bit2
8(ReservedSwitchP RsvdSwPara0_bit1 RsvdSwPara0_bit1
1,
arameter0_bit18), 9~18, 9:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit1 RsvdSwPara0_bit2 RsvdSwPara0_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara0_bit2
arameter0_bit19), RsvdSwPara0_bit2 RsvdSwPara0_bit2
3,
RsvdSwPara0_bit2 1~20, 1:Off,
RsvdSwPara0_bit2
0(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
4,
arameter0_bit20), 2~21, 2:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara0_bit2
arameter0_bit21), RsvdSwPara0_bit2 RsvdSwPara0_bit2
6,
RsvdSwPara0_bit2 4~23, 4:Off,
RsvdSwPara0_bit2
2(ReservedSwitchP RsvdSwPara0_bit2 RsvdSwPara0_bit2
7,
arameter0_bit22), 5~24, 5:Off,
RsvdSwPara0_bit2
RsvdSwPara0_bit2 RsvdSwPara0_bit2 RsvdSwPara0_bit2
arameter1_bit10), ~6, Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit8 RsvdSwPara1_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara1_bit1
arameter1_bit11), RsvdSwPara1_bit9 RsvdSwPara1_bit9:
1,
RsvdSwPara1_bit1 ~8, Off,
RsvdSwPara1_bit1
2(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
2,
arameter1_bit12), 0~9, 0:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara1_bit1
arameter1_bit13), RsvdSwPara1_bit1 RsvdSwPara1_bit1
4,
RsvdSwPara1_bit1 2~11, 2:Off,
RsvdSwPara1_bit1
4(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
5,
arameter1_bit14), 3~12, 3:Off,
RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara1_bit1
arameter1_bit15), RsvdSwPara1_bit1 RsvdSwPara1_bit1
7,
RsvdSwPara1_bit1 5~14, 5:Off,
RsvdSwPara1_bit1
6(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
8,
arameter1_bit16), 6~15, 6:Off,
None RsvdSwPara1_bit1
RsvdSwPara1_bit1 RsvdSwPara1_bit1 RsvdSwPara1_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara1_bit2
arameter1_bit17), RsvdSwPara1_bit1 RsvdSwPara1_bit1
0,
RsvdSwPara1_bit1 8~17, 8:Off,
RsvdSwPara1_bit2
8(ReservedSwitchP RsvdSwPara1_bit1 RsvdSwPara1_bit1
1,
arameter1_bit18), 9~18, 9:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit1 RsvdSwPara1_bit2 RsvdSwPara1_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara1_bit2
arameter1_bit19), RsvdSwPara1_bit2 RsvdSwPara1_bit2
3,
RsvdSwPara1_bit2 1~20, 1:Off,
RsvdSwPara1_bit2
0(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
4,
arameter1_bit20), 2~21, 2:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara1_bit2
arameter1_bit21), RsvdSwPara1_bit2 RsvdSwPara1_bit2
6,
RsvdSwPara1_bit2 4~23, 4:Off,
RsvdSwPara1_bit2
2(ReservedSwitchP RsvdSwPara1_bit2 RsvdSwPara1_bit2
7,
arameter1_bit22), 5~24, 5:Off,
RsvdSwPara1_bit2
RsvdSwPara1_bit2 RsvdSwPara1_bit2 RsvdSwPara1_bit2
arameter2_bit10), ~6, On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit8 RsvdSwPara2_bit8:
0,
1(ReservedSwitchP ~7, On,
RsvdSwPara2_bit1
arameter2_bit11), RsvdSwPara2_bit9 RsvdSwPara2_bit9:
1,
RsvdSwPara2_bit1 ~8, On,
RsvdSwPara2_bit1
2(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
2,
arameter2_bit12), 0~9, 0:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
3,
3(ReservedSwitchP 1~10, 1:On,
RsvdSwPara2_bit1
arameter2_bit13), RsvdSwPara2_bit1 RsvdSwPara2_bit1
4,
RsvdSwPara2_bit1 2~11, 2:On,
RsvdSwPara2_bit1
4(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
5,
arameter2_bit14), 3~12, 3:On,
RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
6,
5(ReservedSwitchP 4~13, 4:On,
RsvdSwPara2_bit1
arameter2_bit15), RsvdSwPara2_bit1 RsvdSwPara2_bit1
7,
RsvdSwPara2_bit1 5~14, 5:On,
RsvdSwPara2_bit1
6(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
8,
arameter2_bit16), 6~15, 6:On,
None RsvdSwPara2_bit1
RsvdSwPara2_bit1 RsvdSwPara2_bit1 RsvdSwPara2_bit1
9,
7(ReservedSwitchP 7~16, 7:On,
RsvdSwPara2_bit2
arameter2_bit17), RsvdSwPara2_bit1 RsvdSwPara2_bit1
0,
RsvdSwPara2_bit1 8~17, 8:On,
RsvdSwPara2_bit2
8(ReservedSwitchP RsvdSwPara2_bit1 RsvdSwPara2_bit1
1,
arameter2_bit18), 9~18, 9:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit1 RsvdSwPara2_bit2 RsvdSwPara2_bit2
2,
9(ReservedSwitchP 0~19, 0:On,
RsvdSwPara2_bit2
arameter2_bit19), RsvdSwPara2_bit2 RsvdSwPara2_bit2
3,
RsvdSwPara2_bit2 1~20, 1:On,
RsvdSwPara2_bit2
0(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
4,
arameter2_bit20), 2~21, 2:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
5,
1(ReservedSwitchP 3~22, 3:On,
RsvdSwPara2_bit2
arameter2_bit21), RsvdSwPara2_bit2 RsvdSwPara2_bit2
6,
RsvdSwPara2_bit2 4~23, 4:On,
RsvdSwPara2_bit2
2(ReservedSwitchP RsvdSwPara2_bit2 RsvdSwPara2_bit2
7,
arameter2_bit22), 5~24, 5:On,
RsvdSwPara2_bit2
RsvdSwPara2_bit2 RsvdSwPara2_bit2 RsvdSwPara2_bit2
arameter3_bit10), ~6, Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit8 RsvdSwPara3_bit8:
0,
1(ReservedSwitchP ~7, Off,
RsvdSwPara3_bit1
arameter3_bit11), RsvdSwPara3_bit9 RsvdSwPara3_bit9:
1,
RsvdSwPara3_bit1 ~8, Off,
RsvdSwPara3_bit1
2(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
2,
arameter3_bit12), 0~9, 0:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
3,
3(ReservedSwitchP 1~10, 1:Off,
RsvdSwPara3_bit1
arameter3_bit13), RsvdSwPara3_bit1 RsvdSwPara3_bit1
4,
RsvdSwPara3_bit1 2~11, 2:Off,
RsvdSwPara3_bit1
4(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
5,
arameter3_bit14), 3~12, 3:Off,
RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
6,
5(ReservedSwitchP 4~13, 4:Off,
RsvdSwPara3_bit1
arameter3_bit15), RsvdSwPara3_bit1 RsvdSwPara3_bit1
7,
RsvdSwPara3_bit1 5~14, 5:Off,
RsvdSwPara3_bit1
6(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
8,
arameter3_bit16), 6~15, 6:Off,
None RsvdSwPara3_bit1
RsvdSwPara3_bit1 RsvdSwPara3_bit1 RsvdSwPara3_bit1
9,
7(ReservedSwitchP 7~16, 7:Off,
RsvdSwPara3_bit2
arameter3_bit17), RsvdSwPara3_bit1 RsvdSwPara3_bit1
0,
RsvdSwPara3_bit1 8~17, 8:Off,
RsvdSwPara3_bit2
8(ReservedSwitchP RsvdSwPara3_bit1 RsvdSwPara3_bit1
1,
arameter3_bit18), 9~18, 9:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit1 RsvdSwPara3_bit2 RsvdSwPara3_bit2
2,
9(ReservedSwitchP 0~19, 0:Off,
RsvdSwPara3_bit2
arameter3_bit19), RsvdSwPara3_bit2 RsvdSwPara3_bit2
3,
RsvdSwPara3_bit2 1~20, 1:Off,
RsvdSwPara3_bit2
0(ReservedSwitchP RsvdSwPara3_bit2 RsvdSwPara3_bit2
4,
arameter3_bit20), 2~21, 2:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2 RsvdSwPara3_bit2 RsvdSwPara3_bit2
5,
1(ReservedSwitchP 3~22, 3:Off,
RsvdSwPara3_bit2
arameter3_bit21), RsvdSwPara3_bit2 RsvdSwPara3_bit2
6,
RsvdSwPara3_bit2 4~23, 4:Off,
RsvdSwPara3_bit2
2(ReservedSwitchP RsvdSwPara3_bit2 RsvdSwPara3_bit2
7,
arameter3_bit22), 5~24, 5:Off,
RsvdSwPara3_bit2
RsvdSwPara3_bit2 RsvdSwPara3_bit2 RsvdSwPara3_bit2

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~4294967295 N/A None 0~4294967295 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~65535 N/A None 0~65535 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

0~255 N/A None 0~255 0

OFF(Off), ON(On) OFF~0, ON~1 None OFF, ON OFF(Off)

22:00:00~05:00:00 N/A None 22:00:00~05:00:00 00:00:00

23:00:00~06:00:00 N/A None 23:00:00~06:00:00 06:00:00

NORMAL(Normal),
POWER_OFF(RF NORMAL~0, NORMAL,
None None
Module Regular POWER_OFF~1 POWER_OFF
Time Sleep Mode)
1~20 N/A s 1~20 4
50~100 N/A % 50~100 100
FLOWCONTROL(F
LOWCONTROL), FLOWCONTROL~0 FLOWCONTROL, FLOWCONTROL(F
None
CPULOAD(CPULO , CPULOAD~1 CPULOAD LOWCONTROL)
AD)

50~100 N/A % 50~100 80

 Recommended Initial Value Parameter
Impact Access
Value Setting Source Relationship

Radio Planning CnOperatorExtende

None None Read Only
(Internal planning) dQci

CnOperatorExtende
None Engineering Design None Read Only
dQci

CnOperatorExtende
None Engineering Design None Read & Write
dQci

CnOperatorExtende
None Engineering Design None Read & Write
dQci

None Engineering Design CnOperatorHoCfg None Read Only

In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
Default/Recommen must be set to
EUTRAN CnOperatorHoCfg Read & Write
ded Value EUTRAN_TDD if
FirstRatPri is set to
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if
FirstRatPri is set to
EUTRAN_TDD.
 In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
NULL if FirstRatPri
is set to EUTRAN.
In the
CnOperatorHoCfg
MO, SecondRatPri
Default/Recommen must be set to
NULL CnOperatorHoCfg Read & Write
ded Value EUTRAN_TDD if
FirstRatPri is set to
EUTRAN_FDD.
In the
CnOperatorHoCfg
MO, SecondRatPri
must be set to
EUTRAN_FDD if
FirstRatPri is set to
EUTRAN_TDD.

Default/Recommen
0 CnOperatorHoCfg None Read & Write
ded Value

Default/Recommen
0 CnOperatorHoCfg None Read & Write
ded Value
 Default/Recommen
0 CnOperatorHoCfg None Read & Write
ded Value

Default/Recommen
0 CnOperatorHoCfg None Read & Write
ded Value

Default/Recommen
ON(on) CnOperatorHoCfg None Read & Write
ded Value

CnOperatorId in an
CnOperatorSpidCfg
Radio Planning
None CnOperatorSpidCfg MO must be set in Read Only
(Internal planning)
the associated
CnOperator MO.
None Engineering Design CnOperatorSpidCfg None Read Only

Radio Planning
None CnOperatorSpidCfg None Read & Write
(Internal planning)

RatFreqPriorityGrou
pId in a
CnOperatorSpidCfg
Radio Planning
None CnOperatorSpidCfg MO must be set in Read & Write
(Internal planning)
the associated
RatFreqPriorityGrou
p MO.

Radio Planning CnOperatorStandar

None None Read Only
(Internal planning) dQci

The
ServiceHoBearerPo
licy in the
CnOperatorStandar
dQci can be set to
CnOperatorStandar SERVICE_HO_QCI
None Engineering Design Read Only
dQci _NOT_ALLOWED
only when the value
of the Qci in the
CnOperatorStandar
dQci is set to QCI1
or QCI2.
 CnOperatorStandar
None Engineering Design None Read & Write
dQci

CnOperatorStandar
None Engineering Design None Read & Write
dQci

The
ServiceHoBearerPo
licy in the
CnOperatorStandar
dQci can be set to
SERVICE_HO_QCI CnOperatorStandar SERVICE_HO_QCI
Engineering Design Read & Write
_ALLOWED dQci _NOT_ALLOWED
only when the value
of the Qci in the
CnOperatorStandar
dQci is set to QCI1
or QCI2.

CSFallBackBlindHo
None Engineering Design None Read Only
Cfg
 In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
Default/Recommen CSFallBackBlindHo InterRatLowestPri.
UTRAN Read & Write
ded Value Cfg In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatSecondPri.
 In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatSecondPri.
Default/Recommen CSFallBackBlindHo
GERAN In the Read & Write
ded Value Cfg
CSFallBackBlindHo
Cfg MO,
InterRatLowestPri
must be set to
NULL if
InterRatSecondPri
is set to NULL.
 In the
CSFallBackBlindHo
Cfg MO,
InterRatHighestPri
must be different
from
InterRatLowestPri.
In the
CSFallBackBlindHo
Cfg MO,
InterRatLowestPri
Default/Recommen CSFallBackBlindHo must be set to
CDMA2000 Read & Write
ded Value Cfg NULL if
InterRatSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
InterRatSecondPri
must be different
from
InterRatLowestPri if
InterRatSecondPri
is not set to NULL.

Default/Recommen CSFallBackBlindHo
OFF(Off) None Read & Write
ded Value Cfg

Default/Recommen CSFallBackBlindHo
OFF(Off) None Read & Write
ded Value Cfg

Default/Recommen CSFallBackBlindHo
OFF(Off) None Read & Write
ded Value Cfg
 In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
Default/Recommen CSFallBackBlindHo IdleCsfbLowestPri.
UTRAN Read & Write
ded Value Cfg In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.

In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbSecondPri.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbLowestPri
Default/Recommen CSFallBackBlindHo must be set to
GERAN Read & Write
ded Value Cfg NULL if
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.
 In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbHighestPri
must be different
from
IdleCsfbLowestPri.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbLowestPri
Default/Recommen CSFallBackBlindHo must be set to
CDMA2000 Read & Write
ded Value Cfg NULL if
IdleCsfbSecondPri
is set to NULL.
In the
CSFallBackBlindHo
Cfg MO,
IdleCsfbSecondPri
must be different
from
IdleCsfbLowestPri if
IdleCsfbSecondPri
is not set to NULL.

Default/Recommen CSFallBackBlindHo
OFF(Off) None Read & Write
ded Value Cfg

REDIRECTION:On,
Default/Recommen CSFallBackPolicyCf
CCO_HO:On,PS_H None Read & Write
ded Value g
O:On

REDIRECTION:On,
Default/Recommen CSFallBackPolicyCf
CCO_HO:On,PS_H None Read & Write
ded Value g
O:On
 CSFallBackPolicyCf
OFF Engineering Design None Read & Write
g

CSFallBackPolicyCf
2 Engineering Design None Read & Write
g

Radio Planning
EutranVoipHoBlkLis
None (Negotiation with None Read Only
t
the peer)
 Radio Planning
EutranVoipHoBlkLis
None (Negotiation with None Read Only
t
the peer)

Radio Planning
EutranVoipHoBlkLis
None (Negotiation with None Read Only
t
the peer)

Radio Planning
None InterPlmnHoList None Read Only
(Internal planning)

Radio Planning
None (Negotiation with InterPlmnHoList None Read Only
the peer)
 Radio Planning
None (Negotiation with InterPlmnHoList None Read Only
the peer)

RatFreqPriorityGrou
None Engineering Design None Read Only
p

Default/Recommen RatFreqPriorityGrou
None None Read Only
ded Value p

Radio Planning RatFreqPriorityGrou

None None Read Only
(Internal planning) p

In the same
RAT/frequency
priority group
specified by
Radio Planning RatFreqPriorityGrou RatFreqPriorityGrou
None Read & Write
(Internal planning) p pId, frequencies
used for different
RATs must be
assigned different
priorities.

RatFreqPriorityGrou
None Engineering Design None Read & Write
p
 Radio Planning ServiceIfDlEarfcnGr
None None Read Only
(Internal planning) p

ServiceIfDlEarfcnGr
None Engineering Design None Read Only
p

Radio Planning ServiceIfDlEarfcnGr

None None Read Only
(Internal planning) p

DlEarfcn in
ServiceIfDlEarfcnGr
p can not be
reduplicated for the
Default/Recommen ServiceIfDlEarfcnGr same CnOperatorId
None Read & Write
ded Value p and
ServiceIfHoCfgGrou
pId in
ServiceIfDlEarfcnGr
p

Default/Recommen ServiceIfDlEarfcnGr
None None Read & Write
ded Value p

Radio Planning ServiceIfHoCfgGrou

None None Read Only
(Internal planning) p

ServiceIfHoCfgGrou
None Engineering Design None Read Only
p
 Default/Recommen ServiceIfHoCfgGrou
NO_HO None Read & Write
ded Value p

Radio Planning ServiceIfHoCfgGrou

0 None Read & Write
(Internal planning) p

ServiceIfHoCfgGrou
3000 N/A None Read & Write
p
 ServiceIfHoCfgGrou
640ms Engineering Design None Read & Write
p

Radio Planning ServiceIrHoCfgGro

None None Read Only
(Internal planning) up

ServiceIrHoCfgGro
None Engineering Design None Read Only
up

Default/Recommen ServiceIrHoCfgGro
NO_HO None Read & Write
ded Value up
SERVIC_IR_MEAS ServiceIrHoCfgGro
Engineering Design None Read & Write
_NO_ORDER up

None Engineering Design SpidCfg None Read Only

Default/Recommen
None SpidCfg None Read & Write
ded Value

Radio Planning
None SpidCfg None Read & Write
(Internal planning)

Radio Planning
None SpidCfg None Read & Write
(Internal planning)

Default/Recommen
None SpidCfg None Read & Write
ded Value

Default/Recommen
None SpidCfg None Read & Write
ded Value
 Default/Recommen
None SpidCfg None Read & Write
ded Value

Default/Recommen
None SpidCfg None Read & Write
ded Value

Radio Planning
None (Negotiation with SpidHPlmnList None Read Only
the peer)

Radio Planning
None (Negotiation with SpidHPlmnList None Read Only
the peer)

Mcc in each
Radio Planning
SpidHPlmnList MO
None (Negotiation with SpidHPlmnList Read Only
consists of digits
the peer)
only.

Mnc in each
Radio Planning
SpidHPlmnList MO
None (Negotiation with SpidHPlmnList Read Only
consists of digits
the peer)
only.

Radio Planning
UtranNetworkCapCf
None (Negotiation with None Read Only
g
the peer)

Radio Planning
UtranNetworkCapCf
None (Negotiation with None Read Only
g
the peer)
 When more than
oneUtranNetworkC
apCfgis
Radio Planning configured,under
UtranNetworkCapCf
None (Negotiation with the same Mcc and Read Only
g
the peer) Mnc, RncId
4294967295 can
not be co-exist with
other RncId values.

PsHoCapCfg:Off,
SiByRimCapCfg:Off
Radio Planning UtranNetworkCapCf
, VoipCapCfg:On, None Read & Write
(Internal planning) g
UltraFlashCsfbCap
Cfg:Off

Radio Planning eNBCnOpQciRsvd

None None Read Only
(Internal planning) Para

Radio Planning eNBCnOpQciRsvd

None None Read Only
(Internal planning) Para
 eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para
 eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para
 eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para
 eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para
 eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para

eNBCnOpQciRsvd
None Engineering Design None Read & Write
Para
 quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three or
more consecutive
plus signs (+), two
or more
consecutive
spaces, and two or
more consecutive
percentage signs
(%).
Due to the
limitations defined
in 3GPP TS 36.413
for the S1 interface,
Radio Planning
None eNodeBFunction the value of Read & Write
(Internal planning)
eNodeBFunctionNa
me can contain only
the following
characters that
comply with
American Standard
Code for
Information
Interchange
(ASCII): upper-case
letters (A to Z),
lower-case letters
(a to z), digits (0 to
9), single blank ( ),
left brackets ((),
right brackets ()),
plus signs (+),
hyphens (-), and full

None N/A eNodeBFunction None Read Only

Radio Planning
None eNodeBFunction None Read & Write
(Internal planning)

None Engineering Design eNodeBFunction None Read & Write

None N/A eNodeBFunction None Read Only

Default/Recommen
None eNodeBFunction None Read Only
ded Value
 Radio Planning
None EUAPN None Read Only
(Internal planning)

Radio Planning
None EUAPN None Read & Write
(Internal planning)

Radio Planning
None EUAPN None Read & Write
(Internal planning)

Radio Planning
None EUAPN None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read Only
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUAPNTemplate None Read & Write
(Internal planning)

Radio Planning
None EUEPCInfo None Read Only
(Internal planning)
 Radio Planning
None EUEPCInfo None Read & Write
(Internal planning)

Radio Planning
None EUEPCInfo None Read & Write
(Internal planning)

Radio Planning
None EUEPCInfo None Read & Write
(Internal planning)

Radio Planning
None EUEPCInfo None Read & Write
(Internal planning)

EEA0:Off, Radio Planning

EUEPCSec None Read & Write
EEA1:Off, EEA2:On (Internal planning)

Radio Planning
EIA1:Off, EIA2:On EUEPCSec None Read & Write
(Internal planning)

Radio Planning
None EUIPAddressPool None Read Only
(Internal planning)

Radio Planning
None EUIPAddressPool None Read & Write
(Internal planning)

Radio Planning
None EUIPAddressPool None Read & Write
(Internal planning)

Radio Planning
None EUIPAddressPool None Read & Write
(Internal planning)

Radio Planning
None EuRrn None Read Only
(Internal planning)

Radio Planning
None EuRrn None Read & Write
(Internal planning)
None N/A EuRrn None Read Only

Radio Planning
None EuRrn None Read & Write
(Internal planning)

None N/A EuRrn None Read Only

Transport
None Planning(Negotiatio EuRrn None Read & Write
n with the peer)

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

None N/A EuRrn None Read Only

 Transport
None Planning(Negotiatio EuRrn None Read & Write
n with the peer)

Radio Planning
None EuRrn None Read Only
(Internal planning)

The number of the

EuRrnLanIp MOs
with the
Radio Planning LocalSubscriberId
None EuRrnLanIp Read Only
(Internal planning) parameters set to
the same value is
less than or equal
to 16.

Radio Planning
None EuRrnLanIp None Read Only
(Internal planning)

Radio Planning
None EuRrnLanIp None Read & Write
(Internal planning)

Transport
None Planning(Internal EuRrnPort None Read Only
planning)

Transport
None Planning(Internal EuRrnPort None Read Only
planning)

Transport
Port 0:On, Port
Planning(Internal EuRrnPort None Read & Write
1:Off
planning)

Radio Planning
None EuRrnRt None Read Only
(Internal planning)

The number of the

EuRrnRt MOs with
the
Radio Planning LocalSubscriberId
None EuRrnRt Read & Write
(Internal planning) parameters set to
the same value is
less than or equal
to 8.

Radio Planning
None EuRrnRt None Read & Write
(Internal planning)
 Radio Planning
None EuRrnRt None Read & Write
(Internal planning)

Radio Planning
None EuRrnRt None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read Only
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

The value of the

EuSubscriber::IMSI]
Radio Planning
None EuSubscriber parameter in the Read & Write
(Internal planning)
EUSubscriber MO
must be unique.

The value of the

RrnId parameter in
each EuSubscriber
MO must be
unique.
Radio Planning
None EuSubscriber The value of the Read & Write
(Internal planning)
RrnId parameter in
the EuSubscriber
MO must consist of
digits from 0 to 9
only.

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)
 Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning
None EuSubscriber None Read & Write
(Internal planning)

Radio Planning EUSubscriberTempl

None None Read Only
(Internal planning) ate

Radio Planning EUSubscriberTempl

None None Read & Write
(Internal planning) ate

Radio Planning EUSubscriberTempl

None None Read & Write
(Internal planning) ate

Radio Planning EUSubscriberTempl

None None Read & Write
(Internal planning) ate

Radio Planning EUSubscriberTempl

None None Read & Write
(Internal planning) ate

Radio Planning
None RelayExtendedQci None Read Only
(Internal planning)

One and only one

RelayExtendedQci
MO in which the
Radio Planning
None RelayExtendedQci DefaultBearerInd Read & Write
(Internal planning)
parameter is set to
YES can be
configured.

None Engineering Design RelayExtendedQci None Read & Write

 A maximum of one
RelayExtendedQci
MO in which the
SchType parameter
is set to PQ can be
Radio Planning configured.
None RelayExtendedQci Read & Write
(Internal planning) A maximum of three
RelayExtendedQci
MOs in which the
SchType parameter
is set to WFQ can
be configured.
 Radio Planning
None RelayExtendedQci None Read & Write
(Internal planning)

Radio Planning
None RelayExtendedQci None Read & Write
(Internal planning)
 Radio Planning
None RelayExtendedQci None Read & Write
(Internal planning)

Radio Planning
None RelayExtendedQci None Read & Write
(Internal planning)

10 Engineering Design RelayExtendedQci None Read & Write

 Default/Recommen
256ms(256ms) ANRMeasureParam None Read & Write
ded Value
 Default/Recommen
2 ANRMeasureParam None Read & Write
ded Value

Default/Recommen
0 ANRMeasureParam None Read & Write
ded Value
 Default/Recommen
512ms(512ms) ANRMeasureParam None Read & Write
ded Value
 Default/Recommen
2 ANRMeasureParam None Read & Write
ded Value
 Default/Recommen
-106 ANRMeasureParam None Read & Write
ded Value

Default/Recommen
0 CounterCheckPara None Read & Write
ded Value
 Default/Recommen
0 CounterCheckPara None Read & Write
ded Value

OFF(Off) Engineering Design CounterCheckPara None Read & Write

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
AES(AES SecondCipherAlgo,
Engineering Design ENodeBCipherCap Read & Write
Algorithm) ThirdCipherAlgo,an
d FourthCipherAlgo
parameters must be
set to different
values.
 In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
Snow3G(SNOW 3G SecondCipherAlgo,
Engineering Design ENodeBCipherCap Read & Write
Algorithm) ThirdCipherAlgo,an
d FourthCipherAlgo
parameters must be
set to different
values.

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
ZUC(ZUC SecondCipherAlgo,
Engineering Design ENodeBCipherCap Read & Write
Algorithm) ThirdCipherAlgo,an
d FourthCipherAlgo
parameters must be
set to different
values.

In the
ENodeBCipherCap
MO, the
PrimaryCipherAlgo,
NULL(NULL SecondCipherAlgo,
Engineering Design ENodeBCipherCap Read & Write
Algorithm) ThirdCipherAlgo,an
d FourthCipherAlgo
parameters must be
set to different
values.
 Default/Recommen ENodeBConnState
20 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
20 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
35 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
5000 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
5000 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
10000 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
8000 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
5000 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
5000 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
15 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
35 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
35 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
50 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
35 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
20 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
20 None Read & Write
ded Value Timer

Default/Recommen ENodeBConnState
35 None Read & Write
ded Value Timer
 Default/Recommen ENodeBConnState
80 None Read & Write
ded Value Timer

In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o,
AES(AES ENodeBIntegrityCa
Engineering Design SecondIntegrityAlg Read & Write
Algorithm) p
o, and
ThirdIntegrityAlgo
parameters must be
set to different
values.

In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o,
Snow3G(SNOW 3G ENodeBIntegrityCa
Engineering Design SecondIntegrityAlg Read & Write
Algorithm) p
o, and
ThirdIntegrityAlgo
parameters must be
set to different
values.
 In the
ENodeBIntegrityCa
p MO, the
PrimaryIntegrityAlg
o,
ZUC(ZUC ENodeBIntegrityCa
Engineering Design SecondIntegrityAlg Read & Write
Algorithm) p
o, and
ThirdIntegrityAlgo
parameters must be
set to different
values.

Enable(Enable ENodeBIntegrityCa
Engineering Design None Read & Write
NULL Algorithm) p

eNodeBUSImeisvCf
None Engineering Design None Read Only
g

eNodeBUSImeisvCf
255 Engineering Design None Read Only
g
 UeTypeDesc is a
string of a
maximum of 80
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
eNodeBUSImeisvCf
None Engineering Design commas (,), Read & Write
g
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more consecutive
spaces, and two or
more consecutive
percentage signs
(%)

UsBasedSpecificSP Radio Planning

eNodeBUSParaCfg None Read & Write
ID (Internal planning)

Radio Planning
none eNodeBUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
30 eNodeBUSParaCfg None Read & Write
(Internal planning)

Radio Planning
70 eNodeBUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
20 eNodeBUSParaCfg None Read & Write
(Internal planning)

Radio Planning
20 eNodeBUSParaCfg None Read & Write
(Internal planning)

Radio Planning
None eNodeBUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
OFF(Off) eNodeBUSParaCfg None Read & Write
(Internal planning)

eNodeBUsTraceIdC
None N/A None Read Only
fg

eNodeBUsTraceIdC
None N/A None Read & Write
fg

OFF(Off) Engineering Design PdcpRohcPara None Read & Write

O_MODE(Bi-
directional Engineering Design PdcpRohcPara None Read & Write
Optimistic Mode)
Profile0x0001:On,
Profile0x0002:On,
Engineering Design PdcpRohcPara None Read & Write
Profile0x0003:On,
Profile0x0004:On

PrivateCaBandCom
None N/A None Read Only
b
 PrivateCaBandCom
None N/A None Read & Write
b

PrivateCaBandCom
None N/A None Read & Write
b
 PrivateCaBandCom
None N/A None Read & Write
b

In a
PrivateCaBandCom
b MO, the value of
PrivateCaBandCom
None N/A CombBand2Id must Read & Write
b
be greater than or
equal to the value
of CombBand1Id.
 In a
PrivateCaBandCom
b MO, if the value
of CombBand3Id is
PrivateCaBandCom
None N/A not 0, the value of Read & Write
b
CombBand3Id must
be greater than or
equal to the value
of CombBand2Id.

In a
PrivateCaBandCom
b MO, if the value
of CombBand4Id is
not 0, the value of
CombBand4Id must
be greater than or
equal to the value
PrivateCaBandCom
None N/A of CombBand3Id. Read & Write
b
In a
PrivateCaBandCom
b MO, if the value
of CombBand4Id is
not 0, the value of
CombBand3Id must
be a non-zero
value.
 PrivateCaBandCom
None N/A None Read & Write
b

PrivateCaBandCom
None N/A None Read & Write
b
 PrivateCaBandCom
None N/A None Read & Write
b

PrivateCaBandCom
None N/A None Read & Write
b
 PrivateCaBandCom
None N/A None Read Only
b

Default/Recommen
4 RrcConnStateTimer None Read & Write
ded Value
 Default/Recommen
min10(10) RrcConnStateTimer None Read & Write
ded Value

Default/Recommen
ms500(500) RrcConnStateTimer None Read & Write
ded Value
 Default/Recommen
ms8000(8000) RrcConnStateTimer None Read & Write
ded Value

Default/Recommen
min120(120) RrcConnStateTimer None Read & Write
ded Value
 This parameter is
valid only when the
DynDrxSwitch
Default/Recommen option of the
20 RrcConnStateTimer Read & Write
ded Value DynDrxSwitch
parameter in the
CellAlgoSwitch MO
is cleared.
 This parameter
takes effect when
the DynDrxSwitch
option of the
Default/Recommen
180 RrcConnStateTimer DynDrxSwitch Read & Write
ded Value
parameter is
deselected or UEs
are not DRX-
capable.

Default/Recommen
2 RrcConnStateTimer None Read & Write
ded Value
 This parameter is
valid only when the
DynDrxSwitch
Default/Recommen option of the
200 RrcConnStateTimer Read & Write
ded Value DynDrxSwitch
parameter in the
CellAlgoSwitch MO
is selected.
 This parameter is
valid only when the
DynDrxSwitch
Default/Recommen option of the
20 RrcConnStateTimer Read & Write
ded Value DynDrxSwitch
parameter in the
CellAlgoSwitch MO
is selected.
 This parameter is
valid only when the
DynDrxSwitch
Default/Recommen option of the
20 RrcConnStateTimer Read & Write
ded Value DynDrxSwitch
parameter in the
CellAlgoSwitch MO
is cleared.
 Default/Recommen
OFF(OFF) SrbCfg None Read & Write
ded Value

Default/Recommen
20 SrbCfg None Read & Write
ded Value
 Default/Recommen
m200(200ms) SrbCfg None Read & Write
ded Value
 Default/Recommen
150 SrbCfg None Read & Write
ded Value

None N/A TceIpMapping None Read Only

Transport
None Planning(Negotiatio TceIpMapping None Read & Write
n with the peer)

When the IPMODE

parameter is set to
IPV4(IPv4), the
TceIpV4Addr
Transport parameter must be
None Planning(Negotiatio TceIpMapping set. When the Read & Write
n with the peer) IPMODE parameter
is set to IPV6(IPv6),
the TceIpV4Addr
parameter does not
need to be set.
 When the IPMODE
parameter is set to
IPV6(IPv6), the
TceIpV6Addr
Transport parameter must be
None Planning(Negotiatio TceIpMapping set. When the Read & Write
n with the peer) IPMODE parameter
is set to IPV4(IPv4),
the TceIpV6Addr
parameter does not
need to be set.

ArpPrioritySchSwitc Radio Planning

UserPriority None Read & Write
h:0 (Internal planning)

Radio Planning
GOLD(Gold) UserPriority None Read & Write
(Internal planning)

Radio Planning
GOLD(Gold) UserPriority None Read & Write
(Internal planning)

Radio Planning
GOLD(Gold) UserPriority None Read & Write
(Internal planning)

Radio Planning
GOLD(Gold) UserPriority None Read & Write
(Internal planning)

Radio Planning
GOLD(Gold) UserPriority None Read & Write
(Internal planning)

Radio Planning
SILVER(Silver) UserPriority None Read & Write
(Internal planning)

Radio Planning
SILVER(Silver) UserPriority None Read & Write
(Internal planning)
 Radio Planning
SILVER(Silver) UserPriority None Read & Write
(Internal planning)

Radio Planning
SILVER(Silver) UserPriority None Read & Write
(Internal planning)

Radio Planning
SILVER(Silver) UserPriority None Read & Write
(Internal planning)

Radio Planning
BRONZE(Bronze) UserPriority None Read & Write
(Internal planning)

Radio Planning
BRONZE(Bronze) UserPriority None Read & Write
(Internal planning)

Radio Planning
BRONZE(Bronze) UserPriority None Read & Write
(Internal planning)

Radio Planning
BRONZE(Bronze) UserPriority None Read & Write
(Internal planning)

Radio Planning
BRONZE(Bronze) UserPriority None Read & Write
(Internal planning)

Radio Planning
None UserQciPriority None Read Only
(Internal planning)

QCI6: 1000, QCI7:

Radio Planning
950, QCI8: 900, UserQciPriority None Read & Write
(Internal planning)
QCI9: 850
QCI6: 1000, QCI7:
Radio Planning
950, QCI8: 900, UserQciPriority None Read & Write
(Internal planning)
QCI9: 850

QCI6: 800, QCI7:

Radio Planning
750, QCI8: 700, UserQciPriority None Read & Write
(Internal planning)
QCI9: 650

QCI6: 800, QCI7:

Radio Planning
750, QCI8: 700, UserQciPriority None Read & Write
(Internal planning)
QCI9: 650

QCI6: 600, QCI7:

Radio Planning
550, QCI8: 500, UserQciPriority None Read & Write
(Internal planning)
QCI9: 450
QCI6: 600, QCI7:
Radio Planning
550, QCI8: 500, UserQciPriority None Read & Write
(Internal planning)
QCI9: 450

Mcc in each
Radio Planning X2AutoSetupOpera X2AutoSetupOpera
None Read Only
(Internal planning) tor tor MO consists of
digits only.
Mnc in each
Radio Planning X2AutoSetupOpera X2AutoSetupOpera
None Read Only
(Internal planning) tor tor MO consists of
digits only.

None Engineering Design CaMgtCfg None Read Only

In the CaMgtCfg
MO, the value of
CarrAggrA4ThdRsr
Default/Recommen
-109 CaMgtCfg p must be greater Read & Write
ded Value
than the value of
CarrAggrA2ThdRsr
p
 Default/Recommen
-105 CaMgtCfg None Read & Write
ded Value

Default/Recommen
OFF(Off) CaMgtCfg None Read & Write
ded Value
 Default/Recommen
9 CaMgtCfg None Read & Write
ded Value

Default/Recommen
3 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
50 CaMgtCfg None Read & Write
ded Value

Default/Recommen
100 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
2 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
15 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
r8(8) CaMgtCfg None Read & Write
ded Value
 Default/Recommen
10240ms(10240ms) CaMgtCfg None Read & Write
ded Value
 Default/Recommen
5 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
None CaMgtCfg None Read & Write
ded Value
 If the
CaDl3CCSwitch:Off CaDl4CCSwitch
, option of the
CaUl2CCSwitch:Off CellCaAlgoSwitch
, parameter in the
CaDl4CCSwitch:Off Default/Recommen CaMgtCfg MO is
CaMgtCfg Read & Write
, ded Value selected, the
InterFddTddCaSwit CaDl3CCSwitch
ch:Off, option of the
Tdd2CCDlCaEnhan CellCaAlgoSwitch
ceSwitch:Off parameter must be
selected.

Default/Recommen
20 CaMgtCfg None Read & Write
ded Value
 Default/Recommen
0 CaMgtCfg None Read & Write
ded Value
If this parameter is
set to NOT_CFG,
an eNodeB does
not include the
measCycleSCell IE
when filling the
measurement
configuration
message delivered
to a CA UE, and the
CA UE behavior will
be unpredictable. Default/Recommen
CaMgtCfg None Read & Write
To make a CA UE ded Value
perform radio
resource
measurements
according to
specified
parameters during
an SCell
deactivation, you
are advised to set
this parameter to
320ms.
 Default/Recommen
65535 CaMgtCfg None Read & Write
ded Value

None Engineering Design CellBfMimoParaCfg None Read Only

 This parameter is
valid only when the
BfSwitch check box
MIMO_BF_ADAPTI
is selected in the
VE(MIMO_BF_ADA Engineering Design CellBfMimoParaCfg Read & Write
BfAlgoSwitch
PTIVE)
parameter under
the CellAlgoSwitch
MO.
 determines the
transmission mode
that applies to UEs
served by a multi-
antenna eNodeB.
The transmission
modes vary with the
application
scenarios:
1. TM2 applies to
UEs with low SINR
and a high speed.
2. TM3 applies to
UEs with high SINR
and a high speed.
3. TM4 applies to
UEs with high SINR
and a low speed.
4. TM7 applies to
TM3(TM3) Engineering Design CellBfMimoParaCfg Read & Write
UEs with low SINR
and a low speed.
5. TM8 applies to
UEs with high SINR
and a low speed.
6. TM9w/oPMI
applies to UEs with
high SINR and a
low speed.
7. TM9wPMI
applies to UEs with
high SINR and a
low speed.
The throughput and
coverage achieve
the best
performance only
when the setting of
this parameter
 This parameter is
valid only when the
BfMimoAdaptiveSwi
OFF(Off) Engineering Design CellBfMimoParaCfg tch parameter is set Read & Write
to
MIMO_BF_ADAPTI
VE.
 Radio Planning
0 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)
 The value of the
DualBfToTM3Rank2
Offset parameter
under the
CELLBFMIMOPAR
ACFG MO must be
Radio Planning
less than or equal
0 (Negotiation with CellBfMimoParaCfg Read & Write
to the value of the
the peer)
TM3Rank2ToDualBf
ThdOffset
parameter under
the
CELLBFMIMOPAR
ACFG MO plus 4.
 Radio Planning
0 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)
 Radio Planning
0 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)
 Radio Planning
0 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)
 The value of the
DualBfToTM3Rank2
Offset parameter
under the
CELLBFMIMOPAR
ACFG MO must be
Radio Planning
less than or equal
0 (Negotiation with CellBfMimoParaCfg Read & Write
to the value of the
the peer)
TM3Rank2ToDualBf
ThdOffset
parameter under
the
CELLBFMIMOPAR
ACFG MO plus 4.
 Radio Planning
127 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)
 Radio Planning
128 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)

0(0) Engineering Design CellBfMimoParaCfg None Read & Write

OFF(Off) Engineering Design CellBfMimoParaCfg None Read & Write

This parameter is
valid only when the
BfSwitch check box
is selected in the
OFF(Off) Engineering Design CellBfMimoParaCfg Read & Write
BfAlgoSwitch
parameter under
the CellAlgoSwitch
MO.
 Radio Planning
0 (Negotiation with CellBfMimoParaCfg None Read & Write
the peer)

None Engineering Design CellCqiAdaptiveCfg None Read Only

ON(On) Engineering Design CellCqiAdaptiveCfg None Read & Write

This parameter is
valid only when the
ms40(40ms) Engineering Design CellCqiAdaptiveCfg CqiPeriodAdaptive Read & Write
parameter is set to
OFF(Off).
ON(On) Engineering Design CellCqiAdaptiveCfg None Read & Write

OFF(Off) Engineering Design CellCqiAdaptiveCfg None Read & Write

Radio Planning
None CellDlCompAlgo None Read Only
(Internal planning)
 This parameter is
valid only when the
DlCompSwitch
Default/Recommen parameter in the
-12 CellDlCompAlgo Read & Write
ded Value CellAlgoSwitch MO
of the
corresponding cell
is selected.

Radio Planning
None CellDlpcPdschPa None Read Only
(Internal planning)

Default/Recommen
OFF(Off) CellDlpcPdschPa None Read & Write
ded Value
 This parameter
must be set for
using a fixed
PDSCH power if
Dual-antenna or PdschSpsPcSwitch
four-antenna: under the
Default/Recommen
DB_3_P_A(-3 dB) CellDlpcPdschPa DlPcAlgoSwitch Read & Write
ded Value
Single-antenna: parameter is turned
DB0_P_A(0 dB) off and the
DlIcicSwitch
parameter is set to
DlIcicSwitch_OFF_
ENUM.

Radio Planning
None CellDrxPara None Read Only
(Internal planning)

In a CellDrxPara
MO, the value of
Default/Recommen FddEnterDrxThd
1000 CellDrxPara Read & Write
ded Value must not be greater
than the value of
FddExitDrxThd.
 In a CellDrxPara
MO, the value of
Default/Recommen FddEnterDrxThd
1000 CellDrxPara Read & Write
ded Value must not be greater
than the value of
FddExitDrxThd.

In a CellDrxPara
MO, the value of
Default/Recommen TddEnterDrxThdUl
300 CellDrxPara Read & Write
ded Value must be less than
the value of
TddExitDrxThdUl.

In a CellDrxPara
MO, the value of
Default/Recommen TddEnterDrxThdUl
800 CellDrxPara Read & Write
ded Value must be less than
the value of
TddExitDrxThdUl.

In a CellDrxPara
MO, the value of
Default/Recommen TddEnterDrxThdDl
300 CellDrxPara Read & Write
ded Value must be less than
the value of
TddExitDrxThdDl.

In a CellDrxPara
MO, the value of
Default/Recommen TddEnterDrxThdDl
800 CellDrxPara Read & Write
ded Value must be less than
the value of
TddExitDrxThdDl.

Default/Recommen
30 CellDrxPara None Read & Write
ded Value

Default/Recommen
None CellDrxPara None Read & Write
ded Value
 Default/Recommen
None CellDrxPara None Read & Write
ded Value

In a CellDrxPara
MO, the value of
TddPowerSavingEn
Default/Recommen terDrxThd must be
None CellDrxPara Read & Write
ded Value less than the value
of
TddPowerSavingEx
itDrxThd.

In a CellDrxPara
MO, the value of
TddPowerSavingEn
Default/Recommen terDrxThd must be
None CellDrxPara Read & Write
ded Value less than the value
of
TddPowerSavingEx
itDrxThd.

In a CellDrxPara
MO, the value of
OndurationTimerUn
sync must be
smaller than the
value of
LongDrxCycleUnsy
nc. For LTE TDD
cells, the unit for
the value of the
OndurationTimerUn
sync parameter is
PSF while that for
the value of the
SF1280(1280 Default/Recommen
CellDrxPara LongDrxCycleUnsy Read & Write
subframes) ded Value
nc parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
Relationship" about
OndurationTimerUn
sync.
OFF(Off) Engineering Design CellDrxPara None Read & Write
 divided by 10.
If SA0 is used, the
value of
LongDrxCycleUnsy
nc equals to x*4 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 2; y = 5,
temp = 2; y = 6,
temp = 3; y = 8,
temp = 4.
If SA1 is used, the
value of
LongDrxCycleUnsy
nc equals to x*6 +
temp(y) where: if y
= 0, temp = 0; y = 2,
PSF5(5 PDCCH
Engineering Design CellDrxPara temp = 2; y = 4, Read & Write
subframes)
temp = 2; y = 5,
temp = 3; y = 6,
temp = 4; y = 8,
temp = 5.
If SA2 is used, the
value of
LongDrxCycleUnsy
nc equals to x*8 +
temp(y) where: if y
= 0, temp = 0; y = 2,
temp = 2; y = 4,
temp = 3; y = 5,
temp = 4; y = 6,
temp = 5; y = 8,
temp = 6.
If SA3 is used, the
value of
LongDrxCycleUnsy
PSF200(200
Engineering Design CellDrxPara None Read & Write
PDCCH subframes)

Default/Recommen
DEFAULT(Default) CellDrxPara None Read & Write
ded Value
OFF(Off) Engineering Design CellDrxPara None Read & Write

OFF(Off) Engineering Design CellDrxPara None Read & Write

OFF(Off) Engineering Design CellDrxPara None Read & Write
SF160(160
Engineering Design CellDrxPara None Read & Write
subframes)
PSF2(2 PDCCH
Engineering Design CellDrxPara None Read & Write
subframes)
PSF2(2 PDCCH
Engineering Design CellDrxPara None Read & Write
subframes)
PSF4(4 PDCCH
Engineering Design CellDrxPara None Read & Write
subframes)

OFF(Off) Engineering Design CellDrxPara None Read & Write

SF20(20
Engineering Design CellDrxPara None Read & Write
subframes)
1 Engineering Design CellDrxPara None Read & Write
OFF(Off) Engineering Design CellDrxPara None Read & Write

OFF(Off) Engineering Design CellDrxPara None Read & Write

OFF(Off) Engineering Design CellDrxPara None Read & Write

OFF(Off) Engineering Design CellDrxPara None Read & Write

None Engineering Design CellHoParaCfg None Read Only

-121 Engineering Design CellHoParaCfg None Read & Write
 Default/Recommen
-28 CellHoParaCfg None Read & Write
ded Value

Default/Recommen
None CellHoParaCfg None Read & Write
ded Value

BlindHoSwitch:Off Engineering Design CellHoParaCfg None Read & Write

SrvccWithPsCsRetr Radio Planning

CellHoParaCfg None Read & Write
ySwitch:Off (Internal planning)
 Radio Planning
None (Negotiation with CellHoParaCfg None Read & Write
the peer)

Radio Planning
None (Negotiation with CellHoParaCfg None Read & Write
the peer)

HS_30S(30s) Engineering Design CellHoParaCfg None Read & Write

3 Engineering Design CellHoParaCfg None Read & Write

 If the
L2UCsfbMRProMod
e parameter is set
to the default value
HANDOVER_IMME Radio Planning HANDOVER_IMME
DIATELY(Handover (Negotiation with CellHoParaCfg DIATELY(HANDOV Read & Write
Immediately) the peer) ER_IMMEDIATELY)
, the
CsfbMRWaitingTim
er parameter does
not take effect.

Radio Planning
100 (Negotiation with CellHoParaCfg None Read & Write
the peer)

None Engineering Design CellMimoParaCfg None Read Only

 This parameter is
valid only when the
BfSwitch option of
OL_ADAPTIVE(OL
Engineering Design CellMimoParaCfg the BfAlgoSwitch Read & Write
_ADAPTIVE)
parameter in the
CellAlgoSwitch MO
is cleared.
 This parameter is
valid only when the
TM3(TM3) Engineering Design CellMimoParaCfg MimoAdaptiveSwitc Read & Write
h parameter is set
to NO_ADAPTIVE.
ADAPTIVE(ADAPTI
Engineering Design CellMimoParaCfg None Read & Write
VE)

None Engineering Design CellMlbHo None Read Only

None N/A CellMlbHo None Read & Write
None N/A CellMlbHo None Read & Write
None N/A CellMlbHo None Read & Write

None N/A CellMlbHo None Read & Write

None N/A CellMlbHo None Read & Write

The value of
InterFreqMlbHoInA
1ThdRsrp in the
CellMlbHo MO
None N/A CellMlbHo cannot be smaller Read & Write
than the value of
InterFreqMlbHoInA
2ThdRsrp in the
CellMlbHo MO.
 The value of
InterFreqMlbHoInA
1ThdRsrq in the
CellMlbHo MO
None N/A CellMlbHo cannot be smaller Read & Write
than the value of
InterFreqMlbHoInA
2ThdRsrq in the
CellMlbHo MO.

Radio Planning
UtranRedirectIMMC
(Negotiation with CellMlbHo None Read & Write
I:Off
the peer)

Radio Planning
None CellPreallocGroup None Read Only
(Internal planning)

None Engineering Design CellPreallocGroup None Read Only

ON(On) Engineering Design CellPreallocGroup None Read & Write

OFF(Off) Engineering Design CellPreallocGroup None Read & Write

5 Engineering Design CellPreallocGroup None Read & Write

80 Engineering Design CellPreallocGroup None Read & Write

0 Engineering Design CellPreallocGroup None Read & Write

None Engineering Design CellSrsAdaptiveCfg None Read Only

ON(On) Engineering Design CellSrsAdaptiveCfg None Read & Write

 This parameter is
valid only when the
ms40(40ms) Engineering Design CellSrsAdaptiveCfg SrsPeriodAdaptive Read & Write
parameter is set to
OFF(Off).

CellUeMeasControl
None Engineering Design None Read Only
Cfg
 Default/Recommen CellUeMeasControl
7 None Read & Write
ded Value Cfg
 Default/Recommen CellUeMeasControl
3 None Read & Write
ded Value Cfg
 Default/Recommen CellUeMeasControl
3 None Read & Write
ded Value Cfg
 Default/Recommen CellUeMeasControl
3 None Read & Write
ded Value Cfg
 Default/Recommen CellUeMeasControl
3 None Read & Write
ded Value Cfg
 Default/Recommen CellUeMeasControl
32 None Read & Write
ded Value Cfg

Radio Planning
None CellUlCompAlgo None Read Only
(Internal planning)
 This parameter is
valid only when the
UL CoMP function
specified by the
Default/Recommen UplinkCompSwitch
-20 CellUlCompAlgo Read & Write
ded Value parameter in the
CellAlgoSwitch MO
for the
corresponding cell
is enabled.

Radio Planning
-8 CellUlCompAlgo None Read & Write
(Internal planning)
 Due to the
restraints on
transmission
latency and
bandwidths, the
eNodeB only
selects UEs with
more potential
gains for relaxed-
backhaul-based UL
Default/Recommen CoMP. Therefore,
-6 CellUlCompAlgo Read & Write
ded Value the
UlCompA3OffsetFo
rRelaxedBH
parameter must be
set to a large value,
and it is
recommended that
it be greater than
the value of the
UlCompA3Offset
parameter.

Radio Planning
None CellUlpcDedic None Read Only
(Internal planning)

UU_DISABLE(Disa Default/Recommen
CellUlpcDedic None Read & Write
ble) ded Value
 Default/Recommen
-30 CellUlpcDedic None Read & Write
ded Value

Default/Recommen
-30 CellUlpcDedic None Read & Write
ded Value
UU_FC6_FILTER_
Default/Recommen
COEFF(UU_FC6_F CellUlpcDedic None Read & Write
ded Value
ILTER_COEFF)

None Engineering Design DistBasedHO None Read Only

EUTRAN:Off,GERA
Engineering Design DistBasedHO None Read & Write
N:Off,UTRAN:Off
 10(metric system);
10 Engineering Design DistBasedHO Read & Write
33(imperial system)

Radio Planning
None DrxParaGroup None Read Only
(Internal planning)

None Engineering Design DrxParaGroup None Read Only

QCI 1 and QCI 5:
ON(On)
QCI 2 and QCI 3:
OFF(Off)
Engineering Design DrxParaGroup None Read & Write
QCI 4 and QCI 7:
ON(On)
QCI 6, QCI 8, and
QCI 9: ON(On)
configuration 1: value of the
PSF2(2 PDCCH LongDrxCycle or
subframes) ShortDrxCycle
QCI 6, QCI 8, and parameter divided
QCI 9 for TDD in by 10.
subframe If SA0 is used, the
configuration 2: value of
PSF4(4 PDCCH LongDrxCycle or
subframes) ShortDrxCycle
QCI 6, QCI 8, and equals to x*4 +
QCI 9 for TDD in temp(y) where: if y
subframe = 0, temp = 0; y = 2,
configuration 3: temp = 2; y = 4,
PSF4(4 PDCCH temp = 2; y = 5,
subframes) temp = 2; y = 6,
QCI 6, QCI 8, and temp = 3; y = 8,
QCI 9 for TDD in temp = 4.
subframe If SA1 is used, the
configuration 4: value of
Engineering Design DrxParaGroup Read & Write
PSF4(4 PDCCH LongDrxCycle or
subframes) ShortDrxCycle
QCI 6, QCI 8, and equals to x*6 +
QCI 9 for TDD in temp(y) where: if y
subframe = 0, temp = 0; y = 2,
configuration 5: temp = 2; y = 4,
PSF4(4 PDCCH temp = 2; y = 5,
subframes) temp = 3; y = 6,
QCI 6, QCI 8, and temp = 4; y = 8,
QCI 9 for TDD in temp = 5.
subframe If SA2 is used, the
configuration 6: value of
PSF2(2 PDCCH LongDrxCycle or
subframes) ShortDrxCycle
TDD with energy equals to x*8 +
saving preferentially temp(y) where: if y
considered: = 0, temp = 0; y = 2,
QCI 1 and QCI 5 for temp = 2; y = 4,
TDD in subframe temp = 3; y = 5,
TDD in subframe
configuration 2:
PSF5(5 PDCCH
subframes)
QCI 1 and QCI 5 for
TDD in subframe
configuration 3:
PSF6(6 PDCCH
subframes)
QCI 1 and QCI 5 for
TDD in subframe
configuration 4:
PSF8(8 PDCCH
subframes)
QCI 1 and QCI 5 for
TDD in subframe
configuration 5:
PSF10(10 PDCCH This parameter is
subframes) invalid when
Engineering Design DrxParaGroup Read & Write
QCI 1 and QCI 5 for EnterDrxSwitch is
TDD in subframe set to OFF.
configuration 6:
PSF3(3 PDCCH
subframes)
QCI 4 and QCI 7 for
TDD in subframe
configuration 0 to 6:
PSF80(80 PDCCH
subframes)
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 0 to 6:
PSF80(80 PDCCH
subframes)
TDD with energy
saving preferentially
considered:
QCI 1 and QCI 5 for
FDD: PSF8(8
PDCCH subframes)
QCI 4 and QCI 7 for This parameter is
FDD: PSF8(8 invalid when
Engineering Design DrxParaGroup Read & Write
PDCCH subframes) EnterDrxSwitch is
QCI 6, QCI 8, and set to OFF.
QCI 9 for FDD:
PSF8(8 PDCCH
subframes)
FDD with energy
saving preferentially
considered:
QCI 1 and QCI 5:
This parameter is
SF20(20
invalid when
subframes)
EnterDrxSwitch is
QCI 4 and QCI 7:
set to OFF.
SF80(80
In a DrxParaGroup
subframes)
MO, the value of
QCI 6, QCI 8, and
OnDurationTimer
QCI 9: SF320(320
must not be greater
subframes)
than the value of
TDD with
LongDrxCycle. For
performance
LTE TDD cells, the
preferentially
unit for the value of
considered:
the
QCI 1 and QCI 5 for
OnDurationTimer
TDD in subframe
parameter is PSF
configuration 0 to 6:
Engineering Design DrxParaGroup while that for the Read & Write
SF20(20
value of the
subframes)
LongDrxCycle
QCI 4 and QCI 7 for
parameter is SF.
TDD in subframe
Before comparing
configuration 0 to 6:
the periods
SF40(40
specified by these
subframes)
parameters and
QCI 6, QCI 8, and
whether these
QCI 9 for TDD in
parameters are
subframe
effective, unify the
configuration 0 to 6:
value units. For
SF40(40
details, see
subframes)
"Parameter
TDD with energy
Relationship" about
saving preferentially
OnDurationTimer.
considered:
QCI 1 and QCI 5 for
TDD in subframe
configuration 0 to 6:

QCI 1 and QCI 5:

UU_DISABLE(Disa
ble)
QCI 2 and QCI 3:
UU_DISABLE(Disa
This parameter is
ble)
invalid when
QCI 4 and QCI 7: Engineering Design DrxParaGroup Read & Write
EnterDrxSwitch is
UU_ENABLE(Enabl
set to OFF.
e)
QCI 6, QCI 8, and
QCI 9:
UU_ENABLE(Enabl
e)
SF20(20 UU_ENABLE, the
subframes) value of
QCI 6, QCI 8, and LongDrxCycle must
QCI 9: SF20(20 be an integer
subframes) multiple of
FDD with energy ShortDrxCycle.
saving preferentially This parameter is
considered: invalid when
QCI 4 and QCI 7: EnterDrxSwitch is
SF20(20 set to OFF.
subframes) In a DrxParaGroup
QCI 6, QCI 8, and MO, the value of
QCI 9: SF80(80 OnDurationTimer
subframes) must not be greater
TDD with than the value of
performance ShortDrxCycle if
preferentially SupportShortDrx is
considered: set to
QCI 4 and QCI 7 for UU_ENABLE. For
Engineering Design DrxParaGroup Read & Write
TDD in subframe LTE TDD cells, the
configuration 0 to 6: unit for the value of
SF20(20 the
subframes) OnDurationTimer
QCI 6, QCI 8, and parameter is PSF
QCI 9 for TDD in while that for the
subframe value of the
configuration 0 to 6: ShortDrxCycle
SF20(20 parameter is SF.
subframes) Before comparing
TDD with energy the periods
saving preferentially specified by these
considered: parameters and
QCI 4 and QCI 7 for whether these
TDD in subframe parameters are
configuration 0 to 6: effective, unify the
SF20(20 value units. For
subframes) details, see
QCI 6, QCI 8, and "Parameter
FDD with
performance
preferentially
considered:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
QCI 9: 1
FDD with energy
saving preferentially
considered:
QCI 4 and QCI 7: 1
QCI 6, QCI 8, and
QCI 9: 1
TDD with
performance
This parameter is
preferentially
invalid when
considered:
EnterDrxSwitch is
QCI 4 and QCI 7 for
set to OFF.
TDD in subframe
Engineering Design DrxParaGroup This parameter is Read & Write
configuration 0 to 6:
invalid when
1
SupportShortDrx is
QCI 6, QCI 8, and
set to
QCI 9 for TDD in
UU_DISABLE.
subframe
configuration 0 to 6:
1
TDD with energy
saving preferentially
considered:
QCI 4 and QCI 7 for
TDD in subframe
configuration 0 to 6:
1
QCI 6, QCI 8, and
QCI 9 for TDD in
subframe
configuration 0 to 6:
1
Radio Planning
None GeranInterfArfcn None Read Only
(Internal planning)

Radio Planning
None GeranInterfArfcn None Read Only
(Internal planning)

None Engineering Design GeranInterfArfcn None Read & Write

InterRatHoCommGr
None Engineering Design None Read Only
oup
 InterRatHoCommGr
None Engineering Design None Read Only
oup

Default/Recommen InterRatHoCommGr
2 None Read & Write
ded Value oup
 Default/Recommen InterRatHoCommGr
640ms None Read & Write
ded Value oup

In an
InterRatHoCommGr
oup MO, the value
of
Default/Recommen InterRatHoCommGr InterRatHoA1ThdR
-111 Read & Write
ded Value oup srp must be greater
than or equal to the
value of
InterRatHoA2ThdR
srp.

In an
InterRatHoCommGr
oup MO, the value
of
Default/Recommen InterRatHoCommGr InterRatHoA1ThdR
-20 Read & Write
ded Value oup srq must be greater
than or equal to the
value of
InterRatHoA2ThdR
srq.
 In an
InterRatHoCommGr
oup MO, the value
of
Default/Recommen InterRatHoCommGr InterRatHoA1ThdR
-115 Read & Write
ded Value oup srp must be greater
than or equal to the
value of
InterRatHoA2ThdR
srp.

In an
InterRatHoCommGr
oup MO, the value
of
Default/Recommen InterRatHoCommGr InterRatHoA1ThdR
-24 Read & Write
ded Value oup srq must be greater
than or equal to the
value of
InterRatHoA2ThdR
srq.
 Default/Recommen InterRatHoCommGr
-115 None Read & Write
ded Value oup

Default/Recommen InterRatHoCommGr
-24 None Read & Write
ded Value oup
 Default/Recommen InterRatHoCommGr
-115 None Read & Write
ded Value oup

Default/Recommen InterRatHoCommGr
-24 None Read & Write
ded Value oup
 InterRatHoCdma1x
None Engineering Design None Read Only
RttGroup

InterRatHoCdma1x
None Engineering Design None Read Only
RttGroup

Default/Recommen InterRatHoCdma1x
2 None Read & Write
ded Value RttGroup
 Default/Recommen InterRatHoCdma1x
-28 None Read & Write
ded Value RttGroup

Default/Recommen InterRatHoCdma1x
640ms None Read & Write
ded Value RttGroup

If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
Default/Recommen InterRatHoCdma1x inter-RAT handover,
-24 Read & Write
ded Value RttGroup coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.

RlfTimerConstGrou
None Engineering Design None Read Only
p

RlfTimerConstGrou
None Engineering Design None Read Only
p
MS200_T301(200m Default/Recommen RlfTimerConstGrou
None Read & Write
s) ded Value p

QCI 1:
MS200_T310(200m
s)
QCI 2:
MS1000_T310(100
0ms)
QCI 3:
MS1000_T310(100
0ms)
QCI 4:
MS1000_T310(100
0ms)
QCI 5:
Default/Recommen RlfTimerConstGrou
MS1000_T310(100 None Read & Write
ded Value p
0ms)
QCI 6:
MS1000_T310(100
0ms)
QCI 7:
MS1000_T310(100
0ms)
QCI 8:
MS1000_T310(100
0ms)
QCI 9:
MS1000_T310(100
0ms)
MS10000_T311(10 Default/Recommen RlfTimerConstGrou
None Read & Write
000ms) ded Value p

QCI 1: n6(6)
QCI 2: n10(10)
QCI 3: n10(10)
QCI 4: n10(10)
Default/Recommen RlfTimerConstGrou
QCI 5: n10(10) None Read & Write
ded Value p
QCI 6: n10(10)
QCI 7: n10(10)
QCI 8: n10(10)
QCI 9: n10(10)

QCI 1: n5(5)
QCI 2: n1(1)
QCI 3: n1(1)
QCI 4: n1(1)
Default/Recommen RlfTimerConstGrou
QCI 5: n1(1) None Read & Write
ded Value p
QCI 6: n1(1)
QCI 7: n1(1)
QCI 8: n1(1)
QCI 9: n1(1)

None Engineering Design CellExtendedQci None Read Only

None Engineering Design CellExtendedQci None Read Only

Default/Recommen
None CellExtendedQci None Read & Write
ded Value

Default/Recommen
None CellExtendedQci None Read & Write
ded Value
 Default/Recommen
None CellExtendedQci None Read & Write
ded Value

Default/Recommen
None CellExtendedQci None Read & Write
ded Value

Default/Recommen
None CellExtendedQci None Read & Write
ded Value

Default/Recommen
None CellExtendedQci None Read & Write
ded Value

None Engineering Design CellExtendedQci None Read & Write

None Engineering Design CellExtendedQci None Read & Write

None Engineering Design CellExtendedQci None Read & Write

This parameter is
valid only when
None Engineering Design CellExtendedQci Read & Write
RlfTimerConstCfgIn
d is set to CFG.
QCI(1, 5): 10000
QCI(2, 3, 4, 6, 7, 8, Engineering Design CellExtendedQci None Read & Write
9): 30000

Radio Planning
None CellStandardQci None Read Only
(Internal planning)

None Engineering Design CellStandardQci None Read Only

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

This parameter is
valid only when the
SriPeriodAdaptive
None Engineering Design CellStandardQci Read & Write
parameter in the
PUCCHCfg MO is
set to OFF.

None Engineering Design CellStandardQci None Read & Write

 This parameter is
valid only when
None Engineering Design CellStandardQci Read & Write
RlfTimerConstCfgIn
d is set to CFG.

QCI(1, 5): 10000

QQCI(2, 3, 4, 6, 7, Engineering Design CellStandardQci None Read & Write
8, 9): 30000

None Engineering Design CellStandardQci None Read & Write

None N/A CellStandardQci None Read & Write

None Engineering Design CellStandardQci None Read & Write

QCI 1:2, QCI 2:4,

QCI 3:3, QCI 4:5,
QCI 5:1, QCI Engineering Design CellStandardQci None Read & Write
6:6,QCI 7:7, QCI
8:8, QCI 9:9

NTER_FREQ_MLB Default/Recommen
CellStandardQci None Read & Write
_ALLOWED:On ded Value

InterRatHoCdmaHr
None Engineering Design None Read Only
pdGroup

InterRatHoCdmaHr
None Engineering Design None Read Only
pdGroup
 Default/Recommen InterRatHoCdmaHr
2 None Read & Write
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-14 None Read & Write
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
640ms None Read & Write
ded Value pdGroup
 If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
Default/Recommen InterRatHoCdmaHr inter-RAT handover,
-10 Read & Write
ded Value pdGroup coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.

Default/Recommen InterRatHoCdmaHr
-113 None Read & Write
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-14 None Read & Write
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-120 None Read & Write
ded Value pdGroup

Default/Recommen InterRatHoCdmaHr
-14 None Read & Write
ded Value pdGroup
 InterRatHoGeranGr
None Engineering Design None Read Only
oup

InterRatHoGeranGr
None Engineering Design None Read Only
oup

Default/Recommen InterRatHoGeranGr
2 None Read & Write
ded Value oup

Default/Recommen InterRatHoGeranGr
-100 None Read & Write
ded Value oup
 Default/Recommen InterRatHoGeranGr
640ms(640ms) None Read & Write
ded Value oup

If the threshold
specified through
this parameter is
higher than the
associated
threshold for the
coverage-based
inter-RAT handover
and the coverage-
based handover is
Default/Recommen InterRatHoGeranGr
-98 enabled, the Read & Write
ded Value oup
coverage-based
handover takes
precedence over
both the load- and
service-based
handovers. In this
case, the load- and
service-based
handovers would
not occur.

InterRatHoUtranGro
None Engineering Design None Read Only
up

InterRatHoUtranGro
None Engineering Design None Read Only
up

Default/Recommen InterRatHoUtranGro
-24 None Read & Write
ded Value up
 Default/Recommen InterRatHoUtranGro
-103 None Read & Write
ded Value up

Default/Recommen InterRatHoUtranGro
0 None Read & Write
ded Value up

Default/Recommen InterRatHoUtranGro
320ms(320ms) None Read & Write
ded Value up
 If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
Default/Recommen InterRatHoUtranGro inter-RAT handover,
-18 Read & Write
ded Value up coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.

If coverage-based
handover is
enabled and the
threshold specified
by this parameter is
higher than the
associated
threshold for
coverage-based
Default/Recommen InterRatHoUtranGro inter-RAT handover,
-101 Read & Write
ded Value up coverage-based
handover takes
precedence over
both load- and
service-based
handovers. In this
case, load- and
service-based
handovers will not
occur.
None Engineering Design CaGroupSCellCfg None Read Only

Default/Recommen
None CaGroupSCellCfg None Read Only
ded Value
 Default/Recommen
None CaGroupSCellCfg None Read Only
ded Value

Default/Recommen
None CaGroupSCellCfg None Read & Write
ded Value
 Default/Recommen
None CaGroupSCellCfg None Read & Write
ded Value

Default/Recommen
None CaGroupSCellCfg None Read & Write
ded Value
 Default/Recommen
None CaGroupSCellCfg None Read & Write
ded Value

None Engineering Design CellMcPara None Read Only

Default/Recommen
-13 CellMcPara None Read & Write
ded Value

Default/Recommen
4 CellMcPara None Read & Write
ded Value
 Default/Recommen
640ms CellMcPara None Read & Write
ded Value

Default/Recommen
8 CellMcPara None Read & Write
ded Value

Default/Recommen
Infinity(Infinity) CellMcPara None Read & Write
ded Value
 Default/Recommen
5120ms CellMcPara None Read & Write
ded Value

Default/Recommen
BOTH CellMcPara None Read & Write
ded Value

Default/Recommen
RSRP CellMcPara None Read & Write
ded Value
 Default/Recommen
-13 CellMcPara None Read & Write
ded Value

Default/Recommen
6 CellMcPara None Read & Write
ded Value

Default/Recommen
RSRP CellMcPara None Read & Write
ded Value
 Default/Recommen
BOTH CellMcPara None Read & Write
ded Value

Default/Recommen
3 CellMcPara None Read & Write
ded Value
 Default/Recommen
RSRP CellMcPara None Read & Write
ded Value

Default/Recommen
BOTH CellMcPara None Read & Write
ded Value

None Engineering Design InterFreqHoGroup None Read Only

None Engineering Design InterFreqHoGroup None Read Only

 Default/Recommen
2 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
640ms InterFreqHoGroup None Read & Write
ded Value
 In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Default/Recommen Rsrp must be
-105 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
InterFreqHoA2Thd
Rsrp.

In an
InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Default/Recommen Rsrq must be
-20 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
InterFreqHoA2Thd
Rsrq.
 1. The value of
InterFreqHoA2Thd
Rsrp must be
smaller than that of
InterFreqHoA1Thd
Rsrp.
Default/Recommen 2. In an
-109 InterFreqHoGroup Read & Write
ded Value InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrp must be larger
than or equal to
InterFreqHoA2Thd
Rsrp.

1. The value of
InterFreqHoA2Thd
Rsrq must be
smaller than that of
InterFreqHoA1Thd
Rsrq.
Default/Recommen 2. In an
-24 InterFreqHoGroup Read & Write
ded Value InterFreqHoGroup
MO, the value of
InterFreqHoA1Thd
Rsrq must be larger
than or equal to
InterFreqHoA2Thd
Rsrq.
 Default/Recommen
2 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-105 InterFreqHoGroup None Read & Write
ded Value
 Default/Recommen
-20 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
640ms InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-103 InterFreqHoGroup None Read & Write
ded Value
 Default/Recommen
-18 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-85 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-16 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
2 InterFreqHoGroup None Read & Write
ded Value
 In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
Default/Recommen hdRsrp must be
-95 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
A3InterFreqHoA2T
hdRsrp.

In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
Default/Recommen hdRsrp must be
-99 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
A3InterFreqHoA2T
hdRsrp.

Default/Recommen
-87 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-20 InterFreqHoGroup None Read & Write
ded Value
-90 N/A InterFreqHoGroup None Read & Write

Default/Recommen
-109 InterFreqHoGroup None Read & Write
ded Value
 Default/Recommen
-24 InterFreqHoGroup None Read & Write
ded Value

Radio Planning
-130 InterFreqHoGroup None Read & Write
(Internal planning)
 Radio Planning
-36 InterFreqHoGroup None Read & Write
(Internal planning)
 Default/Recommen
None InterFreqHoGroup None Read & Write
ded Value
 Default/Recommen
None InterFreqHoGroup None Read & Write
ded Value
 Radio Planning
None (Negotiation with InterFreqHoGroup None Read & Write
the peer)

In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
Default/Recommen hdRsrq must be
-20 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
A3InterFreqHoA2T
hdRsrq.

In an
InterFreqHoGroup
MO, the value of
A3InterFreqHoA1T
Default/Recommen hdRsrq must be
-24 InterFreqHoGroup Read & Write
ded Value greater than or
equal to the value
of
A3InterFreqHoA2T
hdRsrq.
 Default/Recommen
-103 InterFreqHoGroup None Read & Write
ded Value

Default/Recommen
-18 InterFreqHoGroup None Read & Write
ded Value

None Engineering Design IntraFreqHoGroup None Read Only

None Engineering Design IntraFreqHoGroup None Read Only

 Default/Recommen
2 IntraFreqHoGroup None Read & Write
ded Value

Default/Recommen
2 IntraFreqHoGroup None Read & Write
ded Value

Default/Recommen
320ms IntraFreqHoGroup None Read & Write
ded Value
 Radio Planning eNBCellQciRsvdPa
None None Read Only
(Internal planning) ra

Radio Planning eNBCellQciRsvdPa

None None Read Only
(Internal planning) ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra
 eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra
 eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra
 eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra
 eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

eNBCellQciRsvdPa
None Engineering Design None Read & Write
ra

Radio Planning
None CnOperator None Read Only
(Internal planning)
 The value of
CnOperatorName in
None Engineering Design CnOperator each CnOperator Read & Write
MO must be
unique.

CnOperatorType
can be set to
Radio Planning
None CnOperator CNOPERATOR_PR Read & Write
(Internal planning)
IMARY in only one
CnOperator MO.

Mcc in each
CnOperator MO
consists of digits
only.
Radio Planning
None CnOperator The combination of Read & Write
(Internal planning)
Mcc and Mnc in
each CnOperator
MO must be
unique.

Mnc in each
Radio Planning CnOperator MO
None CnOperator Read & Write
(Internal planning) consists of digits
only.

Radio Planning
None CnOperatorIpPath None Read Only
(Internal planning)

Radio Planning
None CnOperatorIpPath None Read & Write
(Internal planning)

Radio Planning
None CnOperatorTa None Read Only
(Internal planning)
 The combination of
CnOperatorId and
Radio Planning
None CnOperatorTa Tac in each Read & Write
(Internal planning)
CnOperatorTa MO
must be unique.

The combination of
CnOperatorId and
Radio Planning
None CnOperatorTa Tac in each Read & Write
(Internal planning)
CnOperatorTa MO
must be unique.

Radio Planning
None CnOpSharingGroup None Read Only
(Internal planning)

PrimaryOperatorId
and
SecondaryOperator
Id referenced by
SecondaryOperator
List in the same
CnOpSharingGroup
Radio Planning
None CnOpSharingGroup MO must be set to Read & Write
(Internal planning)
different values.
The value of
PrimaryOperatorId
in each
CnOpSharingGroup
MO must be
unique.

Radio Planning
None CnOpSharingGroup None Read & Write
(Internal planning)

Radio Planning
None CnOpSharingGroup None Read Only
(Internal planning)
 Radio Planning
None Emc None Read Only
(Internal planning)

None Engineering Design Emc None Read & Write

 This parameter is
valid when
None Engineering Design Emc Read & Write
EmcEnable is set to
ON.
 This parameter is
valid when
1 Engineering Design Emc Read & Write
EmcEnable is set to
ON.
 This parameter is
valid when
1 Engineering Design Emc Read & Write
EmcEnable is set to
ON.

eNodeBChrOutput
None Engineering Design None Read & Write
Ctrl

eNodeBChrOutput
None Engineering Design None Read & Write
Ctrl
 eNodeBChrOutput
None Engineering Design None Read & Write
Ctrl

eNodeBChrOutput
0 Engineering Design None Read & Write
Ctrl

Radio Planning ENodeBSharingMo

None None Read & Write
(Internal planning) de

ON(On) Engineering Design GlobalProcSwitch None Read & Write

None Engineering Design GlobalProcSwitch None Read & Write

ON(On) Engineering Design GlobalProcSwitch None Read & Write

LCG_PROFILE_0 Engineering Design GlobalProcSwitch None Read & Write

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

ON(On) Engineering Design GlobalProcSwitch None Read & Write

The value OFF(Off)
is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the
interlocking
modification
function on the
CME.
Engineering Design GlobalProcSwitch None Read & Write
The value ON(On)
is recommended if
the eNodeB
configuration data
on a network is to
be modified by
using the automatic
eNodeB
configuration
update over the X2
interface.

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

None Engineering Design GlobalProcSwitch None Read & Write

None Engineering Design GlobalProcSwitch None Read & Write

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

If the function of
RRC connection
reestablishment
protection is used, Engineering Design GlobalProcSwitch None Read & Write
you are advised to
set this parameter
to 20.
The recommended
value is 0 if the X2
automatic removal
function is not
required.
Engineering Design GlobalProcSwitch None Read & Write
The recommended
value is 10080 if the
X2 automatic
removal function is
required.

None Engineering Design GlobalProcSwitch None Read & Write

OFF Engineering Design GlobalProcSwitch None Read & Write
None Engineering Design GlobalProcSwitch None Read & Write

None Engineering Design GlobalProcSwitch None Read & Write

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

RrcSetupOptSwitch
:On,
IucsRrcRecfgMcCo
mbSwitch:On,
RcrpRrcRecfgMcCo
mbSwitch:On,
RrcRecfgMcOptSwi
tch:On,
IdleCsfbRedirectOp
Engineering Design GlobalProcSwitch None Read & Write
tSwitch:On,
UlNasBufferSwitch:
On,
IratMeasCfgTransS
witch:On,
GeranAnrMcOptSwi
tch:On,
InactDiscardSwitch:
On
OFF(Off) Engineering Design GlobalProcSwitch none Read & Write

ACTIVE_CELL(Acti
Engineering Design GlobalProcSwitch None Read & Write
ve Cell)
OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

Default/Recommen
Infinity(Infinity) GlobalProcSwitch None Read & Write
ded Value
OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

In the scenario
where the
TimeAlignmentTime
r parameter is set to
INFINITY and the
duration of a UE
being lost must be
Default/Recommen
short, the GlobalProcSwitch None Read & Write
ded Value
parameter value
ON is
recommended. In
other scenarios, the
parameter value
OFF is
recommended.
 Radio Planning
None GlobalProcSwitch None Read & Write
(Internal planning)

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

None Engineering Design GlobalProcSwitch None Read & Write

SupportS1UeCapM
Engineering Design GlobalProcSwitch None Read & Write
atchMsg:Off
ON(On) Engineering Design GlobalProcSwitch None Read & Write

Default/Recommen
OFF GlobalProcSwitch None Read & Write
ded Value

Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value

Default/Recommen
OFF GlobalProcSwitch None Read & Write
ded Value
CaGapMeasPriOffS
witch:Off,
CaHoReqWithR9Co
nfigSwitch:Off,
NasSecProcSwitch:
Off,
AntennaFullConfigS
Engineering Design GlobalProcSwitch None Read & Write
witch:Off,
MultiplexingTabSel
Switch:Off,
DrxConfigMsgSwitc
h:Off,
SCellModCaMeasR
mvSwitch:Off

Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
DISABLE(disable) Engineering Design GlobalProcSwitch None Read & Write

Default/Recommen
OFF(Off) GlobalProcSwitch None Read & Write
ded Value
MAX_SYNC_USER
_1200(MAX_SYNC Engineering Design GlobalProcSwitch None Read & Write
_USER_1200)

Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value

Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value

OFF(Off) Engineering Design GlobalProcSwitch None Read & Write

FreqAddCtrl:ON Engineering Design GlobalProcSwitch None Read & Write

10 for networks
where repeated Radio Planning
GlobalProcSwitch None Read & Write
access failures (Internal planning)
occur
OFF(off) Engineering Design GlobalProcSwitch None Read & Write
AbnormalUeHandle
Switch:Off, Default/Recommen
GlobalProcSwitch None Read & Write
UltraFlashCsfbCom ded Value
OptSw:Off

Radio Planning
OFF(Off) (Negotiation with GlobalProcSwitch None Read & Write
the peer)
 Default/Recommen
None GlobalProcSwitch None Read & Write
ded Value

Radio Planning LicenseSharingPoli

None None Read Only
(Internal planning) cy

The sum of
MaxUserNumRate
in all
LicenseSharingPoli
cy MOs cannot
exceed 100.
LicenseSharingPoli In the
None Engineering Design Read & Write
cy LicenseSharingPoli
cy MO, the value of
UserNumSharingRa
te must be less
than or equal to that
of
MaxUserNumRate

In the
LicenseSharingPoli
cy MO, the value of
LicenseSharingPoli UserNumSharingRa
None Engineering Design Read & Write
cy te must be less
than or equal to that
of
MaxUserNumRate

None Engineering Design MBMSPara None Read Only

58 Engineering Design MBMSPara None Read & Write

None Engineering Design MBMSPara None Read Only

None Engineering Design MBMSPara None Read Only

Default/Recommen
0 MBMSPara None Read & Write
ded Value

None N/A MlbQciGroup None Read Only

None N/A MlbQciGroup None Read & Write

None N/A MlbQciGroup None Read & Write

In the
S1ReestTimer MO,
the value of
None Engineering Design S1ReestTimer S1ReestMinTimer Read & Write
must be less than
or equal to that of
S1ReestMaxTimer.

In the
S1ReestTimer MO,
the value of
None Engineering Design S1ReestTimer S1ReestMinTimer Read & Write
must be less than
or equal to that of
S1ReestMaxTimer.

Radio Planning
None eNBCnOpRsvdPara None Read Only
(Internal planning)
None Engineering Design eNBCnOpRsvdPara None Read & Write
None Engineering Design eNBCnOpRsvdPara None Read & Write
None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

None Engineering Design eNBCnOpRsvdPara None Read & Write

Radio Planning
None ChrOutputMode None Read Only
(Internal planning)

Radio Planning
None ChrOutputMode None Read & Write
(Internal planning)
 Radio Planning
None ChrOutputMode None Read & Write
(Internal planning)

Radio Planning
None ChrOutputMode None Read & Write
(Internal planning)

Radio Planning
None ECO None Read Only
(Internal planning)

Radio Planning
None ECO None Read & Write
(Internal planning)

Radio Planning
None ECO None Read & Write
(Internal planning)

Radio Planning
None ECO None Read & Write
(Internal planning)

None Engineering Design ECO None Read & Write

None N/A ECO None Read Only

None N/A ECO None Read Only

Radio Planning
None eNodeBPath None Read Only
(Internal planning)
 Radio Planning
None eNodeBPath None Read & Write
(Internal planning)

When the AppType

parameter is set to
S1(S1), the
S1InterfaceId
parameter must be
Radio Planning
None eNodeBPath set. When the Read & Write
(Internal planning)
AppType parameter
is set to X2(X2), the
S1InterfaceId
parameter does not
need to be set.

When the AppType

parameter is set to
X2(X2), the
X2InterfaceId
parameter must be
Radio Planning
None eNodeBPath set. When the Read & Write
(Internal planning)
AppType parameter
is set to S1(S1), the
X2InterfaceId
parameter does not
need to be set.

Radio Planning
None M1 None Read Only
(Internal planning)

None N/A M1 None Read & Write

Radio Planning
None M1 None Read & Write
(Internal planning)

Radio Planning
None M2 None Read Only
(Internal planning)

None N/A M2 None Read & Write

 Radio Planning
None M2 None Read & Write
(Internal planning)

Radio Planning
None M2 None Read Only
(Internal planning)

None N/A M2 None Read Only

None N/A M2 None Read Only

None N/A M2 None Read Only

None N/A M2 None Read Only

None N/A M2 None Read Only

None N/A M2 None Read Only

None N/A M2 None Read Only

Radio Planning
None S1 None Read Only
(Internal planning)
 Radio Planning
None S1 None Read & Write
(Internal planning)

The CpEpGroupId
Radio Planning value in each S1
None S1 Read & Write
(Internal planning) MO must be
unique.

Radio Planning
None S1 None Read & Write
(Internal planning)

Radio Planning
None (Negotiation with S1 None Read & Write
the peer)

None Engineering Design S1 None Read & Write

Radio Planning
None S1 None Read & Write
(Internal planning)
 Radio Planning
None S1 None Read & Write
(Internal planning)

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
value is ranging S1 None Read & Write
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

None N/A S1 None Read Only

None N/A S1 None Read Only

None N/A S1 None Read Only

None N/A S1 None Read Only

None N/A S1 None Read Only

 Radio Planning
None S1Interface None Read Only
(Internal planning)

The S1CpBearerId
Radio Planning value in each
None S1Interface Read & Write
(Internal planning) S1Interface MO
must be unique.

Radio Planning
None S1Interface None Read & Write
(Internal planning)

Radio Planning
None (Negotiation with S1Interface None Read & Write
the peer)

Radio Planning
None S1Interface None Read & Write
(Internal planning)

None Engineering Design S1Interface None Read & Write

None N/A S1Interface None Read Only

Radio Planning
None S1Interface None Read & Write
(Internal planning)

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
value is ranging S1Interface None Read & Write
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

None N/A S1Interface None Read Only

Radio Planning
None SO None Read Only
(Internal planning)

Radio Planning
None SO None Read & Write
(Internal planning)
 Radio Planning
None SO None Read & Write
(Internal planning)

Radio Planning
None SO None Read & Write
(Internal planning)

None Engineering Design SO None Read & Write

None N/A SO None Read Only

None N/A SO None Read Only

Radio Planning
None AblMsg None Read Only
(Internal planning)

Radio Planning
None AblMsg None Read Only
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)
 Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)
 Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None AblMsg None Read & Write
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)
 Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read & Write
(Internal planning)

Radio Planning
None eNodeBFddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eNodeBTddBbRes None Read & Write
(Internal planning)
 Radio Planning
None eNodeBTddBbRes None Read Only
(Internal planning)

Radio Planning
None eX2 None Read Only
(Internal planning)

Radio Planning
None eX2 None Read & Write
(Internal planning)

The CpEpGroupId
Radio Planning value in each eX2
None eX2 Read & Write
(Internal planning) MO must be
unique.
The UpEpGroupId
Radio Planning value in each eX2
None eX2 Read & Write
(Internal planning) MO must be
unique.

Radio Planning
None eX2 None Read & Write
(Internal planning)

Radio Planning
None eX2 None Read & Write
(Internal planning)

None N/A eX2 None Read Only

Radio Planning
None eX2 None Read Only
(Internal planning)

Radio Planning
None eX2 None Read Only
(Internal planning)

Radio Planning
None eX2 None Read Only
(Internal planning)

Radio Planning
None MmeFeatureCfg None Read Only
(Internal planning)
DISABLE(disable) Engineering Design MmeFeatureCfg None Read & Write

Radio Planning
None X2 None Read Only
(Internal planning)

Radio Planning
None X2 None Read & Write
(Internal planning)

The CpEpGroupId
Radio Planning value in each X2
None X2 Read & Write
(Internal planning) MO must be
unique.

Radio Planning
None X2 None Read & Write
(Internal planning)

Radio Planning
None (Negotiation with X2 None Read & Write
the peer)

Equipment
None X2 None Read & Write
Planning
 Radio Planning
None X2 None Read & Write
(Internal planning)

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
value is ranging X2 None Read & Write
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

None N/A X2 None Read Only

None N/A X2 None Read Only

None N/A X2 None Read Only

None N/A X2 None Read Only

Mcc in an
X2BlackWhiteList
None Engineering Design X2BlackWhiteList Read Only
MO consists of
digits only.
 Mnc in an
X2BlackWhiteList
None Engineering Design X2BlackWhiteList Read Only
MO consists of
digits only.

None Engineering Design X2BlackWhiteList None Read Only

Radio Planning
None X2BlackWhiteList None Read & Write
(Internal planning)

Radio Planning
None X2Interface None Read Only
(Internal planning)

The X2CpBearerId
Radio Planning value in each
None X2Interface Read & Write
(Internal planning) X2Interface MO
must be unique.

Radio Planning
None X2Interface None Read & Write
(Internal planning)

Radio Planning
None X2Interface None Read & Write
(Internal planning)

None Engineering Design X2Interface None Read & Write

None N/A X2Interface None Read Only

If the eNodeB
works in hybrid
RAN sharing mode,
the recommended
Radio Planning
value is ranging X2Interface None Read & Write
(Internal planning)
from 0 to 5;
otherwise, set this
parameter to the
invalid value 255.

None N/A X2Interface None Read Only

None N/A X2Interface None Read Only

None N/A X2Interface None Read Only

None N/A X2Interface None Read Only

OFF(Off) Engineering Design Drx None Read & Write

Default/Recommen
ON(On) Drx None Read & Write
ded Value
 In the Drx MO, the
value of
OnDurationTimerSp
ecial must not be
greater than the
value of
LongDrxCycleSpeci
al. For LTE TDD
cells, the unit for
the value of the
OnDurationTimerSp
ecial parameter is
PSF while that for
the value of the
SF10(10 Default/Recommen
Drx LongDrxCycleSpeci Read & Write
subframes) ded Value
al parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
Relationship" about
OnDurationTimerSp
ecial.
 LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al parameter
PSF5(5 PDCCH divided by 10.
subframes) for FDD If SA0 is used, the
PSF2(2 PDCCH value of
subframes) for TDD LongDrxCycleSpeci
in subframe al or
configuration 0 ShortDrxCycleSpeci
PSF2(2 PDCCH al equals to x*4 +
subframes) for TDD temp(y) where: if y
in subframe = 0, temp = 0; y = 2,
configuration 1 temp = 2; y = 4,
PSF3(3 PDCCH temp = 2; y = 5,
subframes) for TDD temp = 2; y = 6,
in subframe temp = 3; y = 8,
configuration 2 temp = 4.
PSF2(2 PDCCH Default/Recommen If SA1 is used, the
Drx Read & Write
subframes) for TDD ded Value value of
in subframe LongDrxCycleSpeci
configuration 3 al or
PSF3(3 PDCCH ShortDrxCycleSpeci
subframes) for TDD al equals to x*6 +
in subframe temp(y) where: if y
configuration 4 = 0, temp = 0; y = 2,
PSF3(3 PDCCH temp = 2; y = 4,
subframes) for TDD temp = 2; y = 5,
in subframe temp = 3; y = 6,
configuration 5 temp = 4; y = 8,
PSF2(2 PDCCH temp = 5.
subframes) for TDD If SA2 is used, the
in subframe value of
configuration 6 LongDrxCycleSpeci
al or
ShortDrxCycleSpeci
al equals to x*8 +
temp(y) where: if y
PSF10(10 PDCCH
subframes) for FDD
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 0
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 1
PSF4(4 PDCCH
subframes) for TDD
in subframe
configuration 2
PSF3(3 PDCCH Default/Recommen
Drx None Read & Write
subframes) for TDD ded Value
in subframe
configuration 3
PSF4(4 PDCCH
subframes) for TDD
in subframe
configuration 4
PSF4(4 PDCCH
subframes) for TDD
in subframe
configuration 5
PSF3(3 PDCCH
subframes) for TDD
in subframe
configuration 6

UU_DISABLE(Disa Default/Recommen
Drx None Read & Write
ble) ded Value
 UU_ENABLE, the
value of
LongDrxCycleSpeci
al must be an
integer multiple of
ShortDrxCycleSpeci
al.
In the Drx MO, the
value of
OnDurationTimerSp
ecial must not be
greater than the
value of
ShortDrxCycleSpeci
al if
SupportShortDrxSp
ecial is set to
UU_ENABLE. For
SF10(10 Default/Recommen
Drx LTE TDD cells, the Read & Write
subframes) ded Value
unit for the value of
the
OnDurationTimerSp
ecial parameter is
PSF while that for
the value of the
ShortDrxCycleSpeci
al parameter is SF.
Before comparing
the periods
specified by these
parameters and
whether these
parameters are
effective, unify the
value units. For
details, see
"Parameter
 Default/Recommen
1 Drx None Read & Write
ded Value

SF320(320 Default/Recommen
Drx None Read & Write
subframes) ded Value
LTE->UTRAN:
SF1280(1280
subframes)
LTE->GERAN:
SF2560(2560
subframes)
LTE->CDMA2000 Default/Recommen
Drx None Read & Write
1xRTT: ded Value
SF1280(1280
subframes)
LTE->CDMA2000
HRPD:
SF1280(1280
subframes)

PSF200(200 Default/Recommen
Drx None Read & Write
PDCCH subframes) ded Value
PSF80(80 PDCCH
subframes) for TDD
in subframe
configuration 0
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 1
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 2
PSF100(100
PDCCH subframes)
for TDD in Radio Planning
Drx None Read & Write
subframe (Internal planning)
configuration 3
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 4
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 5
PSF100(100
PDCCH subframes)
for TDD in
subframe
configuration 6

None Engineering Design ExtendedQci None Read Only

IMS signaling:
IMSSignalling(IMS
Signalling)
Low-delay service:
LowDelay(Low
Delay)
Engineering Design ExtendedQci None Read & Write
TCP service or non-
real-time streaming
service:
TCPorBuffStreamin
g(TCP Based or
Buffered Streaming)
IMS signaling: 1000
Low-delay services:
900
Engineering Design ExtendedQci None Read & Write
TCP-based and
buffered streaming
services: 700

IMS signaling: 1000

Low-delay services:
900
Engineering Design ExtendedQci None Read & Write
TCP-based and
buffered streaming
services: 700

MinGbrRate_1_KB(
Engineering Design ExtendedQci None Read & Write
1kB/s)
MinGbrRate_1_KB(
Engineering Design ExtendedQci None Read & Write
1kB/s)

10 Engineering Design ExtendedQci None Read & Write

None Engineering Design ExtendedQci None Read & Write

PBR_8_KBps(8kB/
Engineering Design ExtendedQci None Read & Write
s)

11 Engineering Design ExtendedQci None Read & Write

None Engineering Design ExtendedQci None Read & Write

PAID_USER(Paid
Engineering Design ExtendedQci None Read & Write
User)

None Engineering Design ExtendedQci None Read & Write

Radio Planning
NO. (Negotiation with ExtendedQci None Read & Write
the peer)

Radio Planning
EQUAL_PRI_TO_Q
(Negotiation with ExtendedQci None Read & Write
CI1
the peer)
 Radio Planning
EQUAL_PRI_TO_Q
(Negotiation with ExtendedQci None Read & Write
CI1
the peer)

InterRatPolicyCfgGr
None Engineering Design None Read Only
oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup
 Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen InterRatPolicyCfgGr
None None Read & Write
ded Value oup

Default/Recommen
None PuschParam None Read & Write
ded Value
 Default/Recommen
None PuschParam None Read & Write
ded Value

Default/Recommen
None PuschParam None Read & Write
ded Value

None Engineering Design RlcPdcpParaGroup None Read Only

QCI 1:
DiscardTimer_100(
100 ms)
QCI 2:
DiscardTimer_150(
150 ms)
QCI 3:
DiscardTimer_50(5
0 ms)
QCI 4:
DiscardTimer_300(
300 ms)
QCI 5:
Default/Recommen
DiscardTimer_150( RlcPdcpParaGroup None Read & Write
ded Value
150 ms)
QCI 6:
DiscardTimer_Infinit
y(infinity)
QCI 7:
DiscardTimer_150(
150 ms)
QCI 8:
DiscardTimer_Infinit
y(infinity)
QCI 9:
DiscardTimer_Infinit
y(infinity)

QCI 1:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 2:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 3:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 4:
RlcMode_AM(Ackn
owledge Mode)
Default/Recommen
QCI 5: RlcPdcpParaGroup None Read & Write
ded Value
RlcMode_AM(Ackn
owledge Mode)
QCI 6:
RlcMode_AM(Ackn
owledge Mode)
QCI 7:
RlcMode_UM(Un-
acknowledge
Mode)
QCI 8:
RlcMode_AM(Ackn
owledge Mode)
QCI 9:
RlcMode_AM(Ackn
owledge Mode)
 This parameter is
Maxretx_Threshold Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
_t32(32) ded Value is set to
RlcMode_AM.
 This parameter is
Maxretx_Threshold Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
_t32(32) ded Value is set to
RlcMode_AM.
QCI4:
PollByte_kb25(25
kBytes)
QCI5:
PollByte_infinity(infi
nite kBytes)
This parameter is
QCI6:
Default/Recommen valid when RlcMode
PollByte_kb25(25 RlcPdcpParaGroup Read & Write
ded Value is set to
kBytes)
RlcMode_AM.
QCI8:
PollByte_kb25(25
kBytes)
QCI9:
PollByte_kb25(25
kBytes)
QCI4:
PollByte_kb25(25
kBytes)
QCI5:
PollByte_infinity(infi
nite kBytes)
This parameter is
QCI6:
Default/Recommen valid when RlcMode
PollByte_kb25(25 RlcPdcpParaGroup Read & Write
ded Value is set to
kBytes)
RlcMode_AM.
QCI8:
PollByte_kb25(25
kBytes)
QCI9:
PollByte_kb25(25
kBytes)
QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_Infinity(infi
nite PDUs)
This parameter is
QCI 6:
Default/Recommen valid when RlcMode
PollPdu_p32(32 RlcPdcpParaGroup Read & Write
ded Value is set to
PDUs)
RlcMode_AM.
QCI 8:
PollPdu_p32(32
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_Infinity(infi
nite PDUs)
This parameter is
QCI 6:
Default/Recommen valid when RlcMode
PollPdu_p32(32 RlcPdcpParaGroup Read & Write
ded Value is set to
PDUs)
RlcMode_AM.
QCI 8:
PollPdu_p32(32
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
 This parameter is
Tpollretrans_m40(4 Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
0) ded Value is set to
RlcMode_AM.
 This parameter is
Tpollretrans_m50(5 Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
0) ded Value is set to
RlcMode_AM.
QCI 4:
Tstatprohibit_m50(5
0ms)
QCI 5:
Tstatprohibit_m0(0
ms)
This parameter is
QCI 6:
Default/Recommen valid when RlcMode
Tstatprohibit_m50(5 RlcPdcpParaGroup Read & Write
ded Value is set to
0ms)
RlcMode_AM.
QCI 8:
Tstatprohibit_m50(5
0ms)
QCI 9:
Tstatprohibit_m50(5
0ms)
QCI 4:
Tstatprohibit_m40(4
0ms)
QCI 5:
Tstatprohibit_m0(0
ms)
This parameter is
QCI 6:
Default/Recommen valid when RlcMode
Tstatprohibit_m40(4 RlcPdcpParaGroup Read & Write
ded Value is set to
0ms)
RlcMode_AM.
QCI 8:
Tstatprohibit_m40(4
0ms)
QCI 9:
Tstatprohibit_m40(4
0ms)
 This parameter is
Treordering_m50(5 Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
0) ded Value is set to
RlcMode_AM.
 This parameter is
Treordering_m40(4 Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
0) ded Value is set to
RlcMode_AM.

QCI 1:
PdcpSnsize_7bits(7
bits)
QCI 2:
PdcpSnsize_12bits( This parameter is
12 bits) Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
QCI 3: ded Value is set to
PdcpSnsize_12bits( RlcMode_UM.
12 bits)
QCI 7:
PdcpSnsize_12bits(
12 bits)
QCI 1:
RlcSnSize_size5(5b
its)
QCI 2:
RlcSnSize_size10(1 This parameter is
0bits) Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
QCI 3: ded Value is set to
RlcSnSize_size10(1 RlcMode_UM.
0bits)
QCI 7:
RlcSnSize_size10(1
0bits)

QCI 1:
RlcSnSize_size5(5b
its)
QCI 2:
RlcSnSize_size10(1 This parameter is
0bits) Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
QCI 3: ded Value is set to
RlcSnSize_size10(1 RlcMode_UM.
0bits)
QCI 7:
RlcSnSize_size10(1
0bits)
QCI 1:
Treordering_m50(5
0ms)
QCI 2:
Treordering_m50(5 This parameter is
0ms) Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
QCI 3: ded Value is set to
Treordering_m15(1 RlcMode_UM.
5ms)
QCI 7:
Treordering_m50(5
0ms)
QCI 1:
Treordering_m40(4
0ms)
QCI 2:
Treordering_m40(4 This parameter is
0ms) Default/Recommen valid when RlcMode
RlcPdcpParaGroup Read & Write
QCI 3: ded Value is set to
Treordering_m10(1 RlcMode_UM.
0ms)
QCI 7:
Treordering_m40(4
0ms)

This parameter is
Default/Recommen valid when RlcMode
TRUE(TRUE) RlcPdcpParaGroup Read & Write
ded Value is set to
RlcMode_AM.
 Default/Recommen
OFF(Off) RlcPdcpParaGroup None Read & Write
ded Value
 Default/Recommen
m200(200) RlcPdcpParaGroup None Read & Write
ded Value
 Default/Recommen
m200(200) RlcPdcpParaGroup None Read & Write
ded Value
 Default/Recommen
m200(200) RlcPdcpParaGroup None Read & Write
ded Value
 Default/Recommen
m200(200) RlcPdcpParaGroup None Read & Write
ded Value

Default/Recommen
OFF(Off) RlcPdcpParaGroup None Read & Write
ded Value
 Default/Recommen
OFF(Off) RlcPdcpParaGroup None Read & Write
ded Value
QCI 1:
DiscardTimer_100(
100 ms)
QCI 2:
DiscardTimer_150(
150 ms)
QCI 3:
DiscardTimer_50(5
0 ms)
QCI 4:
DiscardTimer_300(
300 ms)
QCI 5:
Default/Recommen
DiscardTimer_150( RlcPdcpParaGroup None Read & Write
ded Value
150 ms)
QCI 6:
DiscardTimer_Infinit
y(infinity)
QCI 7:
DiscardTimer_150(
150 ms)
QCI 8:
DiscardTimer_Infinit
y(infinity)
QCI 9:
DiscardTimer_Infinit
y(infinity)

None Engineering Design SrbRlcPdcpCfg None Read Only

Maxretx_Threshold Default/Recommen
SrbRlcPdcpCfg None Read & Write
_t32(32) ded Value
Maxretx_Threshold Default/Recommen
SrbRlcPdcpCfg None Read & Write
_t32(32) ded Value

PollByte_infinity(infi Default/Recommen
SrbRlcPdcpCfg None Read & Write
nite kBytes) ded Value
QCI4:
PollByte_kb25(25
kBytes)
QCI5:
PollByte_infinity(infi
nite kBytes)
QCI6:
Default/Recommen
PollByte_kb25(25 SrbRlcPdcpCfg None Read & Write
ded Value
kBytes)
QCI8:
PollByte_kb25(25
kBytes)
QCI9:
PollByte_kb25(25
kBytes)
PollPdu_Infinity(infi Default/Recommen
SrbRlcPdcpCfg None Read & Write
nite PDUs) ded Value
QCI 4:
PollPdu_p32(32
PDUs)
QCI 5:
PollPdu_Infinity(infi
nite PDUs)
QCI 6:
Default/Recommen
PollPdu_p32(32 SrbRlcPdcpCfg None Read & Write
ded Value
PDUs)
QCI 8:
PollPdu_p32(32
PDUs)
QCI 9:
PollPdu_p32(32
PDUs)
Tpollretrans_m45(4 Default/Recommen
SrbRlcPdcpCfg None Read & Write
5) ded Value
Tpollretrans_m45(4 Default/Recommen
SrbRlcPdcpCfg None Read & Write
5) ded Value
 Default/Recommen
Tstatprohibit_m0(0) SrbRlcPdcpCfg None Read & Write
ded Value
 Default/Recommen
Tstatprohibit_m0(0) SrbRlcPdcpCfg None Read & Write
ded Value
Treordering_m35(3 Default/Recommen
SrbRlcPdcpCfg None Read & Write
5) ded Value
Treordering_m35(3 Default/Recommen
SrbRlcPdcpCfg None Read & Write
5) ded Value

None Engineering Design StandardQci None Read Only

QCI6: 1000
This parameter is
QCI7: 900
Engineering Design StandardQci valid only for QCIs Read & Write
QCI8: 800
6 to 9.
QCI9: 700

QCI6: 1000
This parameter is
QCI7: 900
Engineering Design StandardQci valid only for QCIs Read & Write
QCI8: 800
6 to 9.
QCI9: 700

This parameter is
MinGbrRate_1_KB(
Engineering Design StandardQci valid only for QCIs Read & Write
1kB/s)
6 to 9.
 This parameter is
MinGbrRate_1_KB(
Engineering Design StandardQci valid only for QCIs Read & Write
1kB/s)
6 to 9.

10 Engineering Design StandardQci None Read & Write

None Engineering Design StandardQci None Read & Write

None Engineering Design StandardQci None Read & Write

 This parameter is
PBR_8_KBps(8kB/ valid only for QCIs
Engineering Design StandardQci Read & Write
s) 2 to 4 and QCIs 6
to 9.

QCI1: 5
QCI2: 7
QCI3: 6
QCI4: 8
QCI5: 4 Engineering Design StandardQci None Read & Write
QCI6: 9
QCI7: 10
QCI8: 11
QCI9: 12
 This parameter is
None Engineering Design StandardQci valid only for QCIs Read & Write
5 to 9.

Radio Planning
None eNBQciRsvdPara None Read Only
(Internal planning)
None Engineering Design eNBQciRsvdPara None Read & Write
None Engineering Design eNBQciRsvdPara None Read & Write
None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

None Engineering Design eNBQciRsvdPara None Read & Write

 This parameter is
valid only when
MIMO_BF_ADAPTI BfSwitch under the
BfMimoAdaptivePar
VE(MIMO_BF_ADA Engineering Design BfAlgoSwitch Read & Write
aCfg
PTIVE) parameter in the
CellAlgoSwitch MO
is selected.
 determines the
transmission mode
that applies to UEs
served by a multi-
antenna eNodeB.
The transmission
modes vary with the
application
scenarios:
1. TM2 applies to
UEs with low SINR
and a high speed.
2. TM3 applies to
UEs with high SINR
and a high speed.
3. TM4 applies to
UEs with high SINR
and a low speed.
BfMimoAdaptivePar 4. TM7 applies to
TM3(TM3) Engineering Design Read & Write
aCfg UEs with low SINR
and a low speed.
5. TM8 applies to
UEs with high SINR
and a low speed.
6. TM9w/oPMI
applies to UEs with
high SINR and a
low speed.
7. TM9wPMI
applies to UEs with
high SINR and a
low speed.
The throughput and
coverage achieve
the best
performance only
when the setting of
this parameter
ON(On) Engineering Design CqiAdaptiveCfg None Read & Write

This parameter is
valid only when the
ms40(40ms) Engineering Design CqiAdaptiveCfg CqiPeriodAdaptive Read & Write
parameter is set to
OFF(Off).
ON(On) Engineering Design CqiAdaptiveCfg None Read & Write
 Default/Recommen
ON(On) CqiAdaptiveCfg None Read & Write
ded Value

OFF Engineering Design CqiAdaptiveCfg None Read & Write

 This parameter is
valid only when the
BfSwitch option of
OL_ADAPTIVE(OL MimoAdaptivePara
Engineering Design the BfAlgoSwitch Read & Write
_ADAPTIVE) Cfg
parameter in
CellAlgoSwitch MO
is cleared.
 This parameter is
valid only when
MimoAdaptivePara
TM3(TM3) Engineering Design MimoAdaptiveSwitc Read & Write
Cfg
h is set to
NO_ADAPTIVE.
ADAPTIVE(ADAPTI MimoAdaptivePara
Engineering Design None Read & Write
VE) Cfg

ON(On) Engineering Design SrsAdaptiveCfg None Read & Write

 This parameter is
valid only when the
ms40(40ms) Engineering Design SrsAdaptiveCfg SrsPeriodAdaptive Read & Write
parameter is set to
OFF(Off).

none Engineering Design UeCompatOpt None Read Only

NOT_CFG Engineering Design UeCompatOpt None Read & Write

none Engineering Design UeCompatOpt None Read & Write

LteAnrSwitchOff:off,
UtranAnrSwitchOff:
off,
GeranAnrSwitchOff:
off,
CdmaAnrSwitchOff:
off,
DynamicDrxSwitch
Off:off,
Default/Recommen
CaSwitchOff:off, UeCompatOpt None Read & Write
ded Value
TtiBundlingSwitchO
ff:off,
MimoTmModeSet:o
ff,
AperiodicCqiRptSwi
tchOff:off,
RohcSwitchOff:off,
Tdd2CCDlCaEnhan
ceSwitchOff:off,

none Engineering Design UeCompatOpt None Read & Write

None Engineering Design TypDrbBsr None Read Only

 Default/Recommen
None TypDrbBsr None Read & Write
ded Value

Default/Recommen
None TypDrbBsr None Read & Write
ded Value
GAP_PATTERN_T Default/Recommen
HoMeasComm None Read & Write
YPE_1 ded Value

Default/Recommen
FC6 HoMeasComm None Read & Write
ded Value

Default/Recommen
FC6 HoMeasComm None Read & Write
ded Value
 Default/Recommen
FC6 HoMeasComm None Read & Write
ded Value

Default/Recommen
NOT_CFG HoMeasComm None Read & Write
ded Value
 If SMeasureInd is
set to CFG,
SMeasure must be
Default/Recommen set.
-44 HoMeasComm Read & Write
ded Value If SMeasureInd is
set to NOT_CFG,
SMeasure does not
need to be set.
 Default/Recommen
NOT_CFG HoMeasComm None Read & Write
ded Value
 If
SpeedDepParaInd
is set to CFG,
TcrMaxConnMode
must be set.
T_CRMAX_60S(60 Default/Recommen
HoMeasComm If Read & Write
s) ded Value
SpeedDepParaInd
is set to NOT_CFG,
TcrMaxConnMode
does not need to be
set.
 If
SpeedDepParaInd
is set to CFG,
TcrMaxHystConnM
ode must be set.
T_CRMAXHYST_6 Default/Recommen
HoMeasComm If Read & Write
0S(60s) ded Value
SpeedDepParaInd
is set to NOT_CFG,
TcrMaxHystConnM
ode does not need
to be set.
 In the
HoMeasComm MO,
if
SpeedDepParaInd
is set to CFG,
NcrHighConnMode
must be greater
than
NcrMediumConnMo
de.
Default/Recommen
4 HoMeasComm If Read & Write
ded Value
SpeedDepParaInd
is set to CFG,
NcrMediumConnMo
de must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrMediumConnMo
de does not need to
be set.
 In the
HoMeasComm MO,
if
SpeedDepParaInd
is set to CFG,
NcrHighConnMode
must be greater
than
NcrMediumConnMo
de.
Default/Recommen
8 HoMeasComm If Read & Write
ded Value
SpeedDepParaInd
is set to CFG,
NcrHighConnMode
must be set.
If
SpeedDepParaInd
is set to NOT_CFG,
NcrHighConnMode
does not need to be
set.
 If
SpeedDepParaInd
is set to CFG,
TttSfMedium must
TTT_SF_MEDIUM_ Default/Recommen be set.
HoMeasComm Read & Write
LDOT0(1) ded Value If
SpeedDepParaInd
is set to NOT_CFG,
TttSfMedium does
not need to be set.
 If
SpeedDepParaInd
is set to CFG,
TttSfHigh must be
TTT_SF_HIGH_0D Default/Recommen set.
HoMeasComm Read & Write
OT75(0.75) ded Value If
SpeedDepParaInd
is set to NOT_CFG,
TttSfHigh does not
need to be set.

Default/Recommen
FC6 HoMeasComm None Read & Write
ded Value

Default/Recommen
FC6 HoMeasComm None Read & Write
ded Value
 Default/Recommen
0 HoMeasComm None Read & Write
ded Value

Default/Recommen
4 InterRatHoComm None Read & Write
ded Value
 Default/Recommen
infinity(Infinity) InterRatHoComm None Read & Write
ded Value

Default/Recommen
480ms InterRatHoComm None Read & Write
ded Value
 Default/Recommen
ECN0 InterRatHoComm None Read & Write
ded Value

Default/Recommen
480ms InterRatHoComm None Read & Write
ded Value

Default/Recommen
PILOT_STRENGTH InterRatHoComm None Read & Write
ded Value
 Default/Recommen
480ms InterRatHoComm None Read & Write
ded Value

Default/Recommen
PILOT_STRENGTH InterRatHoComm None Read & Write
ded Value

480ms Engineering Design InterRatHoComm None Read & Write

 Default/Recommen
RSRP InterRatHoComm None Read & Write
ded Value

Default/Recommen
EventB1(EventB1) InterRatHoComm None Read & Write
ded Value

Default/Recommen
1000 InterRatHoComm None Read & Write
ded Value

Default/Recommen
1 InterRatHoComm None Read & Write
ded Value

Default/Recommen
BY_PRIORITY InterRatHoComm None Read & Write
ded Value
 In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to
Default/Recommen
BY_PRIORITY InterRatHoComm PERIOD, Read & Write
ded Value
Cdma20001XrttFre
qSelMode must be
set to
BY_SELECT_RATI
O.

Default/Recommen
NONE InterRatHoComm None Read & Write
ded Value

In a
InterRatHoComm
MO, if
Cdma20001XrttMe
asMode is set to
Default/Recommen
EVENT InterRatHoComm PERIOD, Read & Write
ded Value
Cdma20001XrttFre
qSelMode must be
set to
BY_SELECT_RATI
O.

Default/Recommen
FIXED InterRatHoComm None Read & Write
ded Value

Default/Recommen
8 InterRatHoComm None Read & Write
ded Value

Default/Recommen
8 InterRatHoComm None Read & Write
ded Value

Default/Recommen
0 InterRatHoComm None Read & Write
ded Value

Default/Recommen
0 InterRatHoComm None Read & Write
ded Value
BY_MEAS_RESUL Default/Recommen
InterRatHoComm None Read & Write
T ded Value

Default/Recommen
OFF(Off) InterRatHoComm None Read & Write
ded Value
 Default/Recommen
4 IntraRatHoComm None Read & Write
ded Value

Default/Recommen
infinity(Infinity) IntraRatHoComm None Read & Write
ded Value
 Default/Recommen
RSRP IntraRatHoComm None Read & Write
ded Value

SAME_AS_TRIG_
Default/Recommen
QUAN(Same as IntraRatHoComm None Read & Write
ded Value
Trig Quan)

Default/Recommen
240ms IntraRatHoComm None Read & Write
ded Value
SAME_AS_TRIG_
Default/Recommen
QUAN(Same as IntraRatHoComm None Read & Write
ded Value
Trig Quan)

Default/Recommen
240ms IntraRatHoComm None Read & Write
ded Value
 Default/Recommen
RSRP IntraRatHoComm None Read & Write
ded Value

Default/Recommen
RSRP IntraRatHoComm None Read & Write
ded Value

Default/Recommen
RSRP IntraRatHoComm None Read & Write
ded Value
 Default/Recommen
None IntraRatHoComm None Read & Write
ded Value

Default/Recommen
RSRP IntraRatHoComm None Read & Write
ded Value

Radio Planning
None CSFallBackHo None Read Only
(Internal planning)
 Radio Planning
40ms CSFallBackHo None Read & Write
(Internal planning)

Radio Planning
40ms CSFallBackHo None Read & Write
(Internal planning)

Radio Planning
40ms CSFallBackHo None Read & Write
(Internal planning)

Radio Planning
-106 CSFallBackHo None Read & Write
(Internal planning)
 Radio Planning
-24 CSFallBackHo None Read & Write
(Internal planning)

Radio Planning
-103 CSFallBackHo None Read & Write
(Internal planning)

Default/Recommen
-34 CSFallBackHo None Read & Write
ded Value

Default/Recommen
-80 CSFallBackHo None Read & Write
ded Value
 Radio Planning
4 CSFallBackHo None Read & Write
(Internal planning)

Radio Planning
None CellAcBar None Read Only
(Internal planning)
NOT_CFG(Not
Engineering Design CellAcBar None Read & Write
configure)

AcBarringForEmerg
ency is optional,
BOOLEAN_FALSE( depending on the
Engineering Design CellAcBar Read & Write
False) setting of
AcBarringInfoCfgIn
d.

AcBarringForMoDat
aCfgInd is optional,
NOT_CFG(Not depending on the
Engineering Design CellAcBar Read & Write
configure) setting of
AcBarringInfoCfgIn
d.
 AcBarringFactorFor
Call is optional,
Default/Recommen depending on the
P95(95%) CellAcBar Read & Write
ded Value setting of
AcBarringForMoDat
aCfgInd.

AcBarTimeForCall
is optional,
ACCESS_BARRIN Default/Recommen depending on the
CellAcBar Read & Write
G_TIME_S4(4s) ded Value setting of
AcBarringForMoDat
aCfgInd.
 AC11BarforCall is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoDat
aCfgInd.

AC12BarforCall is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoDat
aCfgInd.

AC13BarforCall is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoDat
aCfgInd.

AC14BarforCall is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoDat
aCfgInd.

AC15BarforCall is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoDat
aCfgInd.
 AcBarringForMoSig
CfgInd is optional,
NOT_CFG(Not depending on the
Engineering Design CellAcBar Read & Write
configure) setting of
AcBarringInfoCfgIn
d.

AcBarTimeForSig is
optional, depending
Default/Recommen
P95(95%) CellAcBar on the setting of the Read & Write
ded Value
AcBarringForMoSig
CfgInd parameter.
 AcBarTimeForSig is
optional, depending
ACCESS_BARRIN Default/Recommen
CellAcBar on the setting of Read & Write
G_TIME_S4(4s) ded Value
AcBarringForMoSig
CfgInd.

AC11BarForSig is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoSig
CfgInd.

AC12BarForSig is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoSig
CfgInd.

AC13BarForSig is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoSig
CfgInd.
 AC14BarForSig is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoSig
CfgInd.

AC15BarForSig is
optional, depending
BOOLEAN_FALSE( Default/Recommen
CellAcBar on the setting of Read & Write
False) ded Value
AcBarringForMoSig
CfgInd.

The
AcBarForMVoiceCf
gInd parameter is
NOT_CFG(Not
Engineering Design CellAcBar optional, depending Read & Write
configure)
on the
AcBarringInfoCfgIn
d parameter setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
Default/Recommen and
P95(95%) CellAcBar Read & Write
ded Value AC15BARSTATE
under
SpecialACBarForM
Voice is selected,
AcBarFactorForMV
oice must be set to
P00.

The
AcBarTimeForMVoi
ce parameter is
ACCESS_BARRIN Default/Recommen optional, depending
CellAcBar Read & Write
G_TIME_S4(4s) ded Value on the
AcBarForMVoiceCf
gInd parameter
setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE:P AC11BARSTATE,
ermit, AC12BARSTATE,
AC12BARSTATE:P AC13BARSTATE,
ermit, AC14BARSTATE,
AC13BARSTATE:P Default/Recommen and
CellAcBar Read & Write
ermit, ded Value AC15BARSTATE
AC14BARSTATE:P under
ermit, SpecialACBarForM
AC15BARSTATE:P Voice is selected,
ermit AcBarFactorForMV
oice must be set to
P00.

The
AcBarForMVideoCf
gInd parameter is
NOT_CFG(Not
Engineering Design CellAcBar optional, depending Read & Write
configure)
on the
AcBarringInfoCfgIn
d parameter setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
Default/Recommen and
P95(95%) CellAcBar Read & Write
ded Value AC15BARSTATE
under
SpecialACBarForM
Video is selected,
AcBarFactorForMVi
deo must be set to
P00.

The
AcBarTimeForMVid
eo parameter is
ACCESS_BARRIN Default/Recommen optional, depending
CellAcBar Read & Write
G_TIME_S4(4s) ded Value on the
AcBarForMVideoCf
gInd parameter
setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE:P AC11BARSTATE,
ermit, AC12BARSTATE,
AC12BARSTATE:P AC13BARSTATE,
ermit, AC14BARSTATE,
AC13BARSTATE:P Default/Recommen and
CellAcBar Read & Write
ermit, ded Value AC15BARSTATE
AC14BARSTATE:P under
ermit, SpecialACBarForM
AC15BARSTATE:P Video is selected,
ermit AcBarFactorForMVi
deo must be set to
P00.

The
AcBarForCsfbCfgIn
d parameter is
NOT_CFG(Not
Engineering Design CellAcBar optional, depending Read & Write
configure)
on the
AcBarringInfoCfgIn
d parameter setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE,
AC12BARSTATE,
AC13BARSTATE,
AC14BARSTATE,
Default/Recommen and
P95(95%) CellAcBar Read & Write
ded Value AC15BARSTATE
under
SpecialACBarForCs
fb is selected,
AcBarFactorForCsf
b must be set to
P00.

The
AcBarTimeForCsfb
parameter is
ACCESS_BARRIN Default/Recommen
CellAcBar optional, depending Read & Write
G_TIME_S4(4s) ded Value
on the
AcBarForCsfbCfgIn
d parameter setting.
 In the CellAcBar
MO, if any of
AC11BARSTATE:P AC11BARSTATE,
ermit, AC12BARSTATE,
AC12BARSTATE:P AC13BARSTATE,
ermit, AC14BARSTATE,
AC13BARSTATE:P Default/Recommen and
CellAcBar Read & Write
ermit, ded Value AC15BARSTATE
AC14BARSTATE:P under
ermit, SpecialACBarForCs
AC15BARSTATE:P fb is selected,
ermit AcBarFactorForCsf
b must be set to
P00.

Radio Planning
None CellAccess None Read Only
(Internal planning)

CELL_NOT_BARR Default/Recommen
CellAccess None Read & Write
ED(Not Barred) ded Value

Default/Recommen
ALLOWED CellAccess None Read & Write
ded Value

NORMAL_MODE(N Default/Recommen
CellAccess None Read & Write
ormal mode) ded Value

Default/Recommen
1 CellAccess None Read & Write
ded Value
 In the CellAccess
MO, the year,
month, day, and
hour in
RoundActionTime
Default/Recommen
None CellAccess can be set to non- Read & Write
ded Value
zero values, and
others (such as the
minute and second)
in this parameter
must be set to 0.

LOFD-001105 /
NOT_CFG(Not Default/Recommen TDLOFD-
CellAccess Read & Write
configure) ded Value 001105:Dynamic
DRX

Default/Recommen
100 CellAccess None Read & Write
ded Value

Radio Planning
None CellOp None Read Only
(Internal planning)

Radio Planning
None CellOp None Read Only
(Internal planning)
CELL_NOT_RESE
Default/Recommen
RVED_FOR_OP(N CellOp None Read & Write
ded Value
ot Reserved)

The sum of
OpUlRbUsedRatio
Default/Recommen
16 CellOp in all CellOp MOs of Read & Write
ded Value
the same cell
cannot exceed 100.

The sum of
OpDlRbUsedRatio
Default/Recommen
16 CellOp in all CellOp MOs of Read & Write
ded Value
the same cell
cannot exceed 100.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
 When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.
 When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

When MMECfgNum
is greater than 1,
among all MMEs
configured in a
CellOp MO, the
Radio Planning
None CellOp MME group identity Read & Write
(Internal planning)
(MMEGI) and MME
code (MMEC) of
each two MMEs
cannot be the same
simultaneously.

In the CellOp MO,

the sum of
Default/Recommen OpUeNumRatio in
16 CellOp Read & Write
ded Value the same cell must
be less than or
equal to 100.

None N/A CellOp None Read Only

Radio Planning
None CellResel None Read Only
(Internal planning)
 Default/Recommen
DB4_Q_HYST(4dB) CellResel None Read & Write
ded Value

NOT_CFG(Not
Engineering Design CellResel None Read & Write
configure)

This parameter is
optional, depending
on the setting of the
SpeedDepReselCfg
Ind parameter.
If the
SpeedDepReselCfg
Ind parameter is set
S60_T_EVALULATI Default/Recommen
CellResel to CFG, this Read & Write
ON(60s) ded Value
parameter must be
set.
If the
SpeedDepReselCfg
Ind parameter is set
to NOT_CFG, this
parameter does not
need to be set.
 This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
S30_T_HYST_NOR Default/Recommen Ind is set to CFG,
CellResel Read & Write
MAL(30s) ded Value THystNormal must
be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
THystNormal does
not need to be set.

In the CellResel
MO, if
SpeedDepReselCfg
Ind is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMediu
m.
If
Default/Recommen
4 CellResel SpeedDepReselCfg Read & Write
ded Value
Ind is set to CFG,
NCellChangeMediu
m must be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
NCellChangeMediu
m does not need to
be set.
 In the CellResel
MO, if
SpeedDepReselCfg
Ind is set to CFG,
NCellChangeHigh
must be greater
than
NCellChangeMediu
m.
If
Default/Recommen
8 CellResel SpeedDepReselCfg Read & Write
ded Value
Ind is set to CFG,
NCellChangeHigh
must be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
NCellChangeHigh
does not need to be
set.

This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
Ind is set to CFG,
DB0_Q_HYST_SF_ Default/Recommen
CellResel QHystSfMedium Read & Write
MEDIUM(0dB) ded Value
must be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
QHystSfMedium
does not need to be
set.

This parameter is
optional, depending
on the setting of
SpeedDepReselCfg
Ind.
If
SpeedDepReselCfg
DB0_Q_HYST_SF_ Default/Recommen Ind is set to CFG,
CellResel Read & Write
HIGH(0dB) ded Value QHystSfHigh must
be set.
If
SpeedDepReselCfg
Ind is set to
NOT_CFG,
QHystSfHigh does
not need to be set.
CFG(Configure) Engineering Design CellResel None Read & Write

Default/Recommen
9 CellResel
ded Value
This parameter is
optional, depending
on the setting of
SNonIntraSearchCf
gInd.
If
SNonIntraSearchCf
gInd is set to CFG,
SNonIntraSearch Read & Write
needs to be set.
If
SNonIntraSearchCf
gInd is set to
NOT_CFG,
SNonIntraSearch
does not need to be
set.

Default/Recommen
7 CellResel None Read & Write
ded Value

Default/Recommen
7 CellResel None Read & Write
ded Value
 Default/Recommen
-64 CellResel None Read & Write
ded Value

NOT_CFG(Not
Engineering Design CellResel None Read & Write
configure)

This parameter is
optional, depending
on the setting of
PMaxCfgInd.
If PMaxCfgInd is
Default/Recommen
23 CellResel set to CFG, PMax Read & Write
ded Value
must be set.
If PMaxCfgInd is
set to NOT_CFG,
PMax does not
need to be set.

CFG(Configure) Engineering Design CellResel None Read & Write

 This parameter is
optional, depending
on the setting of
SIntraSearchCfgInd
.
If
SIntraSearchCfgInd
Default/Recommen
29 CellResel is set to CFG, Read & Write
ded Value
SIntraSearch needs
to be set.
If
SIntraSearchCfgInd
is set to NOT_CFG,
SIntraSearch does
not need to be set.

NOT_CFG(Not
Engineering Design CellResel None Read & Write
configure)

This parameter is
optional, depending
on the setting of
MeasBandWidthCfg
Ind.
If
MeasBandWidthCfg
Ind is set to CFG,
Radio Planning
MBW6(1.4M) CellResel MeasBandWidth Read & Write
(Internal planning)
must be set.
If
MeasBandWidthCfg
Ind is set to
NOT_CFG,
MeasBandWidth
does not need to be
set.

Default/Recommen
1 CellResel None Read & Write
ded Value

CFG(Configure) Engineering Design CellResel None Read & Write

 This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_1DO Default/Recommen
CellResel TReselEutranSfMe Read & Write
T0(1.0) ded Value
dium must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselEutranSfMe
dium does not need
to be set.

This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_0DO Default/Recommen
CellResel TReselEutranSfHig Read & Write
T75(0.75) ded Value
h must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselEutranSfHig
h does not need to
be set.

Default/Recommen
BitString01(01) CellResel None Read & Write
ded Value

BOOLEAN_FALSE(
Engineering Design CellResel None Read & Write
False)
 Default/Recommen
5 CellResel None Read & Write
ded Value

Default/Recommen
4 CellResel None Read & Write
ded Value

NOT_CFG(Not
Engineering Design CellResel None Read & Write
configure)

Default/Recommen
0 CellResel
ded Value
This parameter is
optional, depending
on the setting of
ThrshServLowQCfg
Ind.
If
ThrshServLowQCfg
Ind is set to CFG,
Read & Write
this parameter must
be set.
If
ThrshServLowQCfg
Ind is set to
NOT_CFG, this
parameter does not
need to be set.
 If QQualMinCfgInd
is set to CFG, the
following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will be
set:SIntraSearchQ,
SNonIntraSearchQ,
SIntraSearch,SNonI
ntraSearch and
QQualMin.
CFG(Configure) Engineering Design CellResel Read & Write
If QQualMinCfgInd
is set to NOT_CFG,
the following cell
reselection
parameters in
compliance with
3GPP Release 9 in
SIB3 will not be
set:SIntraSearchQ,
SNonIntraSearchQ,
SIntraSearch,SNonI
ntraSearch and
QQualMin.

This parameter is
optional, depending
on the setting of
QQualMinCfgInd.
If QQualMinCfgInd
Default/Recommen is set to CFG, this
-18 CellResel Read & Write
ded Value parameter must be
set.
If QQualMinCfgInd
is set to NOT_CFG,
this parameter does
not need to be set.

Radio Planning CellReselCdma200

None None Read Only
(Internal planning) 0
NOT_CFG(Not CellReselCdma200
Engineering Design None Read & Write
configure) 0

This parameter is
optional, depending
on the setting of
SysTimeCfgInd.
If SysTimeCfgInd is
set to CFG,
BOOLEAN_TRUE( CellReselCdma200
Engineering Design CdmaEutraSyn Read & Write
True) 0
must be set.
If SysTimeCfgInd is
set to NOT_CFG,
CdmaEutraSyn
does not need to be
set.

NOT_CFG(Not CellReselCdma200
Engineering Design None Read & Write
configure) 0

This parameter is
optional, depending
on the setting of
SearchWndSizeCfg
Ind.
If
SearchWndSizeCfg
Ind is set to CFG,
CellReselCdma200
8 Engineering Design SearchWndSize Read & Write
0
must be set.
If
SearchWndSizeCfg
Ind is set to
NOT_CFG,
SearchWndSize
does not need to be
set.
NOT_CFG(Not CellReselCdma200
Engineering Design None Read & Write
configure) 0

This parameter is
optional, depending
on the setting of
HrpdParaCfgInd.
If HrpdParaCfgInd
is set to CFG,
NOT_CFG(Not CellReselCdma200 HrpdCellReselectP
Engineering Design Read & Write
configure) 0 aramCfgInd must
be set.
If HrpdParaCfgInd
is set to NOT_CFG,
HrpdCellReselectP
aramCfgInd does
not need to be set.

This parameter is
optional, depending
on the setting of the
HrpdCellReselectP
aramCfgInd
parameter.
If the
HrpdCellReselectP
aramCfgInd
CellReselCdma200 parameter is set to
1 Engineering Design Read & Write
0 CFG, this
parameter must be
set.
If the
HrpdCellReselectP
aramCfgInd
parameter is set to
NOT_CFG, this
parameter does not
need to be set.
 optional, depending
on the setting of
HrpdCellReselectP
aramCfgInd.
If
HrpdCellReselectP
aramCfgInd is set
to CFG,
SpeedStateSfCfgIn
d must be set.
If
HrpdCellReselectP
aramCfgInd is set
to NOT_CFG,
SpeedStateSfCfgIn
d does not need to
be set.
2 If
NOT_CFG(Not CellReselCdma200
Engineering Design SpeedStateSfCfgIn Read & Write
configure) 0
d is set to CFG, the
following
parameters must be
set:
TReselCdmaHrpdSf
Medium and
TReselCdmaHrpdSf
High.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG, the
following
parameters do not
need to be set:
TReselCdmaHrpdSf
Medium and
TReselCdmaHrpdSf
This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_0DO Default/Recommen CellReselCdma200
TReselCdmaHprdSf Read & Write
T75(0.75) ded Value 0
High must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselCdmaHprdSf
High does not need
to be set.
 This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_1DO Default/Recommen CellReselCdma200 TReselCdmaHrpdSf
Read & Write
T0(1.0) ded Value 0 Medium must be
set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselCdmaHrpdSf
Medium does not
need to be set.

NOT_CFG(Not CellReselCdma200
Engineering Design None Read & Write
configure) 0

This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI
nd is set to CFG,
NOT_CFG(Not CellReselCdma200 Cdma1XrttLongCod
Engineering Design Read & Write
configure) 0 eStateCfgInd must
be set.
If
Cdma1XrttParaCfgI
nd is set to
NOT_CFG,
Cdma1XrttLongCod
eStateCfgInd does
not need to be set.
 This parameter is
optional, depending
on the setting of
Cdma1XrttParaCfgI
nd.
If
Cdma1XrttParaCfgI
nd is set to CFG,
NOT_CFG(Not CellReselCdma200
Engineering Design Cdma1XrttCellRese Read & Write
configure) 0
lCfgInd must be set.
If
Cdma1XrttParaCfgI
nd is set to
NOT_CFG,
Cdma1XrttCellRese
lCfgInd does not
need to be set.

This parameter is
optional, depending
on the setting of the
Cdma1XrttCellRese
lCfgInd parameter.
If the
Cdma1XrttCellRese
lCfgInd parameter
CellReselCdma200
1 Engineering Design is set to CFG, this Read & Write
0
parameter must be
set.
If the
Cdma1XrttCellRese
lCfgInd parameter
is set to NOT_CFG,
this parameter does
not need to be set.

This parameter is
optional, depending
on the setting of
Cdma1XrttCellRese
lCfgInd.
If
Cdma1XrttCellRese
lCfgInd is set to
CFG,
NOT_CFG(Not CellReselCdma200
Engineering Design Cdma1XrttSpeedSt Read & Write
configure) 0
ateCfgInd must be
set.
If
Cdma1XrttCellRese
lCfgInd is set to
NOT_CFG,
Cdma1XrttSpeedSt
ateCfgInd does not
need to be set.
 This parameter is
optional, depending
on the setting of
Cdma1XrttSpeedSt
ateCfgInd.
If
Cdma1XrttSpeedSt
ateCfgInd is set to
T_RESEL_SF_1DO Default/Recommen CellReselCdma200 CFG,
Read & Write
T0(1.0) ded Value 0 Cdma1XrttSfMediu
m must be set.
If
Cdma1XrttSpeedSt
ateCfgInd is set to
NOT_CFG,
Cdma1XrttSfMediu
m does not need to
be set.

This parameter is
optional. Whether
to set this
parameter is
determined by the
parameter
Cdma1XrttSpeedSt
ateCfgInd.
When
Cdma1XrttSpeedSt
T_RESEL_SF_0DO Default/Recommen CellReselCdma200
ateCfgInd is set to Read & Write
T75(0.75) ded Value 0
CFG,
Cdma1XrttSfHigh
needs to be set.
When
Cdma1XrttSpeedSt
ateCfgInd is set to
NOT_CFG,
Cdma1XrttSfHigh
does not need to be
set.

NOT_CFG(Not Default/Recommen CellReselCdma200

None Read & Write
configure) ded Value 0
 This parameter is
optional, depending
on the setting of the
SupportDualRxCsfb
CfgInd parameter. If
the
SupportDualRxCsfb
BOOLEAN_FALSE( Default/Recommen CellReselCdma200 CfgInd parameter is
Read & Write
False) ded Value 0 set to CFG, this
parameter must be
set. If the
SupportDualRxCsfb
CfgInd parameter is
set to NOT_CFG,
this parameter does
not need to be set.

Radio Planning
None CellReselGeran None Read Only
(Internal planning)

Default/Recommen
1 CellReselGeran None Read & Write
ded Value

NOT_CFG(Not
Engineering Design CellReselGeran None Read & Write
configure)
 This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_1DO Default/Recommen
CellReselGeran TReselGeranSfMed Read & Write
T0(1.0) ded Value
ium must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselGeranSfMed
ium does not need
to be set.

This parameter is
optional, depending
on the setting of
SpeedStateSfCfgIn
d.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_0DO Default/Recommen
CellReselGeran TReselGeranSfHigh Read & Write
T75(0.75) ded Value
must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselGeranSfHigh
does not need to be
set.

Radio Planning
None CellReselUtran None Read Only
(Internal planning)

Default/Recommen
1 CellReselUtran None Read & Write
ded Value

NOT_CFG(Not
Engineering Design CellReselUtran None Read & Write
configure)
 This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_1DO Default/Recommen
CellReselUtran TReselUtranSfMedi Read & Write
T0(1.0) ded Value
um must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselUtranSfMedi
um does not need
to be set.

This parameter is
optional, depending
on the setting of the
SpeedStateSfCfgIn
d parameter.
If
SpeedStateSfCfgIn
d is set to CFG,
T_RESEL_SF_0DO Default/Recommen
CellReselUtran TReselUtranSfHigh Read & Write
T75(0.75) ded Value
must be set.
If
SpeedStateSfCfgIn
d is set to
NOT_CFG,
TReselUtranSfHigh
does not need to be
set.

Radio Planning
None CellSel None Read Only
(Internal planning)

Default/Recommen
-64 CellSel None Read & Write
ded Value
 Default/Recommen
0 CellSel None Read & Write
ded Value

Default/Recommen
-18 CellSel None Read & Write
ded Value

NOT_CFG(Not Default/Recommen
CellSel None Read & Write
configure) ded Value
 This parameter is
optional, depending
on the setting of
QQualMinOffsetCfg
Ind.
If
QQualMinOffsetCfg
Ind is set to CFG,
None Engineering Design CellSel Read & Write
this parameter must
be set.
If
QQualMinOffsetCfg
Ind is set to
NOT_CFG, this
parameter does not
need to be set.

Radio Planning
None CellSiMap None Read Only
(Internal planning)

BOOLEAN_TRUE(
Engineering Design CellSiMap None Read & Write
True)

RF16(16 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value
RF16(16 radio Default/Recommen
CellSiMap None Read & Write
frames) ded Value

RF32(32 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value

RF32(32 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value
RF64(64 radio Default/Recommen
CellSiMap None Read & Write
frames) ded Value

RF64(64 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value

RF64(64 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value
RF16(16 radio Default/Recommen
CellSiMap None Read & Write
frames) ded Value

RF32(32 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value

Default/Recommen
6 CellSiMap None Read & Write
ded Value

Default/Recommen
DISCARD CellSiMap None Read & Write
ded Value

Default/Recommen
DISCARD CellSiMap None Read & Write
ded Value
RF32(32 radio Default/Recommen
CellSiMap None Read & Write
frames) ded Value

If the bandwidth is
1.4 MHz, set this
parameter to 83.
If the bandwidth is 3
MHz, 5 MHz, 10
MHz, 15 MHz, or 20
MHz, set this
parameter to 27. Engineering Design CellSiMap None Read & Write
In peak rate tests,
when four transmit
antennas and 20
MHz bandwidth are
configured, the
recommended
value is 54.

RF32(32 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value
RF32(32 radio Default/Recommen
CellSiMap None Read & Write
frames) ded Value

RF64(64 radio Default/Recommen

CellSiMap None Read & Write
frames) ded Value

Default/Recommen
OFF(Off) CellSiMap None Read & Write
ded Value

Radio Planning
None CellUlpcComm None Read Only
(Internal planning)
 Default/Recommen
AL07(0.7) CellUlpcComm None Read & Write
ded Value

Default/Recommen
-115 CellUlpcComm None Read & Write
ded Value
 Default/Recommen
-67 CellUlpcComm None Read & Write
ded Value

Default/Recommen
DELTAF0(0dB) CellUlpcComm None Read & Write
ded Value

Default/Recommen
DELTAF3(3dB) CellUlpcComm None Read & Write
ded Value
 Default/Recommen
DELTAF1(1dB) CellUlpcComm None Read & Write
ded Value

Default/Recommen
DELTAF2(2dB) CellUlpcComm None Read & Write
ded Value

Default/Recommen
DELTAF2(2dB) CellUlpcComm None Read & Write
ded Value
 Default/Recommen
4 CellUlpcComm None Read & Write
ded Value

DELTAMsg2_6(6dB Radio Planning

CellUlpcComm None Read & Write
) (Internal planning)

Radio Planning eNBCellOpRsvdPar

None None Read Only
(Internal planning) a

Radio Planning eNBCellOpRsvdPar

None None Read Only
(Internal planning) a
 Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a
 Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a
 Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a
 Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a
 Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Default/Recommen eNBCellOpRsvdPar
None None Read & Write
ded Value a

Radio Planning
None EuCellPriBBEqm None Read Only
(Internal planning)

Radio Planning
None EuCellPriBBEqm None Read & Write
(Internal planning)
 Radio Planning
None eUCellSectorEqm None Read Only
(Internal planning)

SECTORID on
Radio Planning which SectorEqmId
None eUCellSectorEqm Read Only
(Internal planning) depends must have
been configured.

Radio Planning
None eUCellSectorEqm None Read & Write
(Internal planning)

Default/Recommen
None eUCellSectorEqm None Read & Write
ded Value

None N/A eUCellSectorEqm None Read Only

None N/A eUCellSectorEqm None Read Only

None N/A eUCellSectorEqm None Read Only

None N/A eUCellSectorEqm None Read Only

None N/A eUCellSectorEqm None Read Only

 Default/Recommen
None eUCellSectorEqm None Read & Write
ded Value

Default/Recommen
None eUCellSectorEqm None Read & Write
ded Value

None N/A eUCellSectorEqm None Read Only

Radio Planning EuSectorEqmGrou

None None Read Only
(Internal planning) p

CellId on which
Radio Planning EuSectorEqmGrou SectorEqmGroupId
None Read Only
(Internal planning) p depends must have
been configured.
 Radio Planning EuSectorEqmGrou
None None Read & Write
(Internal planning) p

Radio Planning EuSectorEqmGrou

None None Read Only
(Internal planning) p

Radio Planning EuSectorEqmGrou

None None Read & Write
(Internal planning) p

Radio Planning EuSectorEqmGrou

None None Read & Write
(Internal planning) p
 Default/Recommen EuSectorEqmGrou
None None Read & Write
ded Value p

Radio Planning
None IbdlInfo None Read Only
(Internal planning)

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

None N/A IbdlInfo None Read Only

 Radio Planning TimeAlignmentTime
None None Read Only
(Internal planning) r

set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to INFINITY.
If the
TimingAdvCmdOpt
Switch parameter is
set to OFF, the
value of the
TimeAlignmentTime
r parameter affects If
the actual value of TimingAdvCmdOpt
the LongDrxCycle Switch is set to ON,
parameter. To TACmdSendPeriod
ensure that the can be configured
value of the only when the GUI
Default/Recommen TimeAlignmentTime
LongDrxCycle value is Invalid or Read & Write
ded Value r
parameter is less than or equal
greater than or to the enumerated
equal to SF80, it is value in the
recommended that following formula:
the Floor(TimeAlignmen
TimeAlignmentTime tTimer/2-32).
r parameter be set
to INFINITY. If the
TimingAdvCmdOpt
Switch parameter is
set to ON, the value
of the
TimeAlignmentTime
r parameter does
not affect the actual
value of the
LongDrxCycle
parameter. To avoid
 If
TimingAdvCmdOpt
The parameter
Switch is set to ON,
value ON(On) is
TACmdSendPeriod
recommended for
can be configured
common cells. The
only when the GUI
parameter value Default/Recommen TimeAlignmentTime
value is Invalid or Read & Write
OFF(Off) is ded Value r
less than or equal
recommended for
to the enumerated
high-speed and
value in the
ultra-high-speed
following formula:
cells.
Floor(TimeAlignmen
tTimer/2-32).
INVALID(Invalid
Timing Default/Recommen TimeAlignmentTime
None Read & Write
Measurement ded Value r
Mode)
 If
If there are many
TimingAdvCmdOpt
UEs in high-speed
Switch is set to ON,
mobility in the cell,
TACmdSendPeriod
the parameter value
can be configured
SF218 is
only when the GUI
recommended. If Default/Recommen TimeAlignmentTime
value is Invalid or Read & Write
there are many UEs ded Value r
less than or equal
in low-speed
to the enumerated
mobility in the cell,
value in the
the parameter value
following formula:
SF928 is
Floor(TimeAlignmen
recommended.
tTimer/2-32).
The parameter
value ON(On) is
recommended for
common cells. The
parameter value Default/Recommen TimeAlignmentTime
None Read & Write
OFF(Off) is ded Value r
recommended for
high-speed and
ultra-high-speed
cells.
 TimeAlignmentTime
15 Engineering Design None Read & Write
r

Radio Planning
None UeTimerConst None Read Only
(Internal planning)

FDD:MS200_T300(
200ms) Default/Recommen
UeTimerConst None Read & Write
TDD:MS1000_T300 ded Value
(1000ms)
MS200_T301(200m Default/Recommen
UeTimerConst None Read & Write
s) ded Value

MS1000_T310(100 Default/Recommen
UeTimerConst None Read & Write
0ms) ded Value

MS10000_T311(10 Default/Recommen
UeTimerConst None Read & Write
000ms) ded Value

Default/Recommen
n1(1) UeTimerConst None Read & Write
ded Value

Default/Recommen
n10(10) UeTimerConst None Read & Write
ded Value
 Radio Planning
None Cell None Read Only
(Internal planning)

In the Cell MO, the

value of CellName
is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
Radio Planning quotation marks ("),
None Cell Read & Write
(Internal planning) commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more consecutive
spaces, and two or
more consecutive
percentage signs
(%).

CsgInd in a Cell MO
BOOLEAN_FALSE(
Engineering Design Cell must be set to Read & Write
False)
BOOLEAN_FALSE.
 SSP6, or SSP7;
(4) If UlCyclicPrefix
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
UlCyclicPrefix and
DlCyclicPrefix must
be set
NORMAL_CP(Nor Radio Planning
Cell NORMAL_CP. Read & Write
mal) (Internal planning)
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
 SSP6, or SSP7;
(4) If UlCyclicPrefix
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N25,
UlCyclicPrefix and
DlCyclicPrefix must
be set
NORMAL_CP(Nor Radio Planning
Cell NORMAL_CP. Read & Write
mal) (Internal planning)
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION,
DlCyclicPrefix and
UlCyclicPrefix in
Cell MO must be
set to
NORMAL_CP.
In a Cell MO, if
FddTddInd,
MultiRruCellFlag
 In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO, if
FreqBand is set to
29, UlEarfcnCfgInd
must be set to
NOT_CFG.
In a Cell MO, if
FreqBand is set to
29, WorkMode must
be set to DL_ONLY.
In a Cell MO,
Radio Planning
None Cell UlEarfcn must be Read & Write
(Internal planning)
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
In a Cell MO,
SubframeAssignme
nt set to SA2,
DlCyclicPrefixand
UlCyclicPrefix must
be set to
NORMAL_CP and
FreqBand set to 39
if
SpecialSubframePa
tterns is set to
SSP9.

In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
NOT_CFG(Not Default/Recommen UlEarfcn must be
Cell Read & Write
configure) ded Value set to the same
value.
In a Cell MO, if
FreqBand is set to
29, UlEarfcnCfgInd
must be set to
NOT_CFG.
 In a Cell MO, if
FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same
value.
In a Cell MO,
UlEarfcn must be
Radio Planning set based on the
None Cell Read & Write
(Internal planning) setting of
FreqBand. For
details, see 3GPP
TS 36.104.
If UlEarfcnCfgInd is
set to CFG,
UlEarfcn must be
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

In a Cell MO,
DlEarfcn must be
set based on the
setting of
FreqBand. For
details, see 3GPP
TS 36.104.
Radio Planning In a Cell MO, if
None Cell Read & Write
(Internal planning) FddTddInd is set to
CELL_TDD and
UlEarfcnCfgInd is
set to CFG,
DlEarfcn and
UlEarfcn must be
set to the same
value.
 BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION, DlBandWidth
and UlBandWidth in
Cell MO must be
set to
CELL_BW_N25,
CELL_BW_N50,
CELL_BW_N75 or
CELL_BW_N100.
When the
FddTddInd is set to
CELL_FDD and
AirCellFlag in Cell
Radio Planning MO is set to
None Cell Read & Write
(Internal planning) BOOLEAN_TRUE,
DlBandWidth and
UlBandWidth must
be set to a value in
one of the following
combinations(DlBan
dWidth/UlBandWidt
h):
CELL_BW_N15/CE
LL_BW_N15;
CELL_BW_N15/CE
LL_BW_N25;
CELL_BW_N15/CE
LL_BW_N50;
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
 CELL_FDD, the
actual value range
of
CPRICompression
varies depending
on the DlBandWidth
parameter setting. If
DlBandWidth is set
to CELL_BW_N6 or
CELL_BW_N15,
CPRICompression
must be set to
NO_COMPRESSIO
N. If DlBandWidth is
set to
CELL_BW_N25,
CPRICompression
can be set to
Radio Planning NO_COMPRESSIO
None Cell Read & Write
(Internal planning) N or
NORMAL_COMPR
ESSION. If
DlBandWidth is set
to any other value,
CPRICompression
can be set to any
value in its value
range.
If MultiRruCellFlag
in a Cell MO is set
to
BOOLEAN_TRUE
and
MultiRruCellMode
in a Cell MO is set
to
DIGITAL_COMBINA
TION, DlBandWidth
CellId must have a
Radio Planning unique value in
None Cell Read & Write
(Internal planning) each Cell MO under
the same eNodeB.
 ranges: 4 to 33, 53
to 70, 79 to 84, 102
to 108, 117 to 132,
154 to 181, 199 to
220, 229 to 230,
248 to 258, 267 to
278, 304 to 327,
345 to 370, 394 to
408, 417 to 424,
442 to 445, 454 to
473, and 492 to
503;
If
CustomizedDLBand
Width is set to a
value in the range
of 89 to 95,
PhyCellId must be
Radio Planning
None Cell set to a value in Read & Write
(Internal planning)
one of the following
ranges: 4 to 20, 36
to 38, 68 to 70, 79
to 85, 104 to 117,
132 to 134, 164 to
170, 179 to 181,
204 to 213, 229 to
230, 244 to 245,
260 to 270, 292 to
295, 304 to 309,
340 to 341, 356 to
370, 388 to 395,
404 to 405, 420,
436 to 437, 454 to
469, and 484 to
495;
If
CustomizedDLBand

Default/Recommen
1 Cell None Read & Write
ded Value
 and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
CELL_COMBINATI
ON, respectively,
TxRxMode must be
set to 1T1R, 2T2R
or 4T4R or 8T8R.
In a Cell MO, if
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
CELL_DEACTIVE( Default/Recommen BOOLEAN_TRUE,
Cell Read & Write
Deactivated) ded Value and
TWO_RRU_COMBI
NATION,
respectively,
TxRxMode must be
set to 2T2R.
In a Cell MO, if
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or

None Engineering Design Cell None Read & Write

This parameter
needs to be
Default/Recommen specified only when
60 Cell Read & Write
ded Value the middle-priority
blocking is
performed.
 BOOLEAN_TRUE
and SFN,
respectively,
DlCyclicPrefix and
UlCyclicPrefix must
be set to
NORMAL_CP.
In a Cell MO, if
FddTddInd is set to
FDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
Radio Planning
None Cell TxRxMode must be Read & Write
(Internal planning)
set to 2T2R or
1T1R.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_FDD,
4T4R, and
CRS_PORT_4,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T4P_0213,
4T4P_0231,
4T4P_0123,
4T4P_0132,
4T4P_0312, or
 PreambleFmt and
SubframeAssignme
nt:
(1) If PreambleFmt
is set to 0,
SubframeAssignme
nt can be set to
SA0, SA1, SA2,
SA3, or SA5;
(2) If PreambleFmt
is set to 1,
SubframeAssignme
nt can be set to
SA0, SA1, or SA3;
(3) If PreambleFmt
is set to 2,
SubframeAssignme
nt can be set to
Radio Planning
None Cell SA0, SA1, or SA3; Read & Write
(Internal planning)
(4) If PreambleFmt
is set to 3,
SubframeAssignme
nt can be set to
SA0 or SA3;
(5) If PreambleFmt
is set to 4,
SubframeAssignme
nt can be set to
SA0, SA1, SA2,
SA3, or SA5.
If FddTddInd is set
to CELL_TDD,
SubframeAssignme
nt must be set.
If FddTddInd is set
to CELL_FDD,
SubframeAssignme
 (2) If UlCyclicPrefix
and DlCyclicPrefix
are both set to
EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6;
(3) If UlCyclicPrefix
is set to
EXTENDED_CP
and DlCyclicPrefix
is set to
NORMAL_CP,
SpecialSubframePa
tterns can be set to
SSP4, SSP5,
SSP6, or SSP7;
Radio Planning
None Cell (4) If UlCyclicPrefix Read & Write
(Internal planning)
is set to
NORMAL_CP and
DlCyclicPrefix is set
to EXTENDED_CP,
SpecialSubframePa
tterns can be set to
SSP3, SSP4,
SSP5, or SSP6.
If FddTddInd is set
to CELL_TDD,
SpecialSubframePa
tterns must be set.
If FddTddInd is set
to CELL_FDD,
SpecialSubframePa
tterns does not
need to be set.
In a Cell MO, if
dB0(0dB) Engineering Design Cell None Read & Write
dB0(0dB) Engineering Design Cell None Read & Write
During manual RootSequenceIdx
configuration, is 42~797;
adhere to the (5) 2600m(8530ft) <
following rules: CellRadius <=
1. If two 3500m(11483ft): the
neighboring cells value range of
use the same or RootSequenceIdx
overlapping time- is 52~786;
frequency (6) 3500m(11483ft)
resources for the < CellRadius <=
physical random 4300m(14107ft):
access channel the value range of
(PRACH), they RootSequenceIdx
must have different is 64~779;
values of this (7) 4300m(14107ft)
parameter. < CellRadius <=
2. If a cell uses a 5500m(18044ft):
preamble format the value range of
Radio Planning
less than 4 and Cell RootSequenceIdx Read & Write
(Internal planning)
provides coverage is 76~765;
for a highway or an (8) 5500m(18044ft)
ultra-high-speed < CellRadius <=
railway, this 6800m(22309ft):
parameter must be the value range of
set by referring to RootSequenceIdx
constraints in the is 90~747;
parameter (9) 6800m(22309ft)
relationship. < CellRadius <=
Note: When 8600m(28215ft):
manually the value range of
configuring root ZC RootSequenceIdx
sequences, ensure is 116~731;
that both the first (10)
logical root 8600m(28215ft) <
sequence and each CellRadius <=
subsequent logical 10600m(34776ft):
root sequence are the value range of
 5500m(18044ft):
the value range of
RootSequenceIdx
is 76~765;
(8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
is 90~747;
(9) 6800m(22309ft)
< CellRadius <=
8600m(28215ft):
the value range of
RootSequenceIdx
is 116~731;
(10)
8600m(28215ft) <
LOW_SPEED(Low
Engineering Design Cell CellRadius <= Read & Write
speed cell flag)
10600m(34776ft):
the value range of
RootSequenceIdx
is 136~706;
(11)
10600m(34776ft) <
CellRadius <=
13200m(43307ft):
the value range of
RootSequenceIdx
is 168~676;
(12)
13200m(43307ft) <
CellRadius <=
17200m(56430ft):
the value range of
RootSequenceIdx
is 204~602;
 (8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
Cell radius <= 1400 is 90~747;
m: Preamble (9) 6800m(22309ft)
formats 0 to 3 are < CellRadius <=
recommended for 8600m(28215ft):
an FDD cell, the value range of
preamble formats 0 RootSequenceIdx
to 4 are is 116~731;
recommended for a (10)
TDD cell; 8600m(28215ft) <
1400 m < Cell CellRadius <=
radius <= 14,500 m: 10600m(34776ft):
Preamble formats 0 the value range of
to 3 are RootSequenceIdx
recommended; Default/Recommen is 136~706;
Cell Read & Write
14,500 m < Cell ded Value (11)
radius <= 29,500 m: 10600m(34776ft) <
Preamble formats 1 CellRadius <=
to 3 are 13200m(43307ft):
recommended; the value range of
29,500 m < Cell RootSequenceIdx
radius <= 77,300 m: is 168~676;
Preamble formats 1 (12)
and 3 are 13200m(43307ft) <
recommended; CellRadius <=
77,300 m < Cell 17200m(56430ft):
radius <= 160,000 the value range of
m: Preamble format RootSequenceIdx
3 is recommended. is 204~602;
(13)
17200m(56430ft) <
CellRadius <=
21500m(70537ft):
the value range of
 is 36~804;
(4) 2000m(6562ft) <
CellRadius <=
2600m(8530ft): the
value range of
RootSequenceIdx
is 42~797;
(5) 2600m(8530ft) <
CellRadius <=
3500m(11483ft): the
value range of
RootSequenceIdx
is 52~786;
(6) 3500m(11483ft)
< CellRadius <=
4300m(14107ft):
the value range of
RootSequenceIdx
Radio Planning is 64~779;
10000 Cell Read & Write
(Internal planning) (7) 4300m(14107ft)
< CellRadius <=
5500m(18044ft):
the value range of
RootSequenceIdx
is 76~765;
(8) 5500m(18044ft)
< CellRadius <=
6800m(22309ft):
the value range of
RootSequenceIdx
is 90~747;
(9) 6800m(22309ft)
< CellRadius <=
8600m(28215ft):
the value range of
RootSequenceIdx
is 116~731;
(10)
 to 97, 102, 110,
117, 127 to 132,
140 to 147, 156,
171 to 172, 177 to
178, 190 to 194,
202, 209, 217 to
222, 232 to 235,
240, 255, 265 to
270, 278 to 285,
294, 309 to 310,
315 to 316, 327 to
332, 340, 347, 355
to 360, 370 to 372,
377 to 378, 393,
402 to 408, 416 to
422, 432, 447, 452
to 454, 465 to 470,
478, 485, and 493
NOT_CFG(Not Radio Planning
Cell to 497. Read & Write
configure) (Internal planning)
In a Cell MO, when
CustomizedBandWi
dthCfgInd is set to
CFG:
If UlBandWidth is
set to
CELL_BW_N6,
CustomizedULBand
Width must be set
to a value in the
range of 12 to 14;
If UlBandWidth is
set to
CELL_BW_N25,
CustomizedULBand
Width must be set
to a value in the
range of 44 to 50;
 CELL_BW_N25,
CustomizedULBand
Width must be set
to a value in the
range of 44 to 50;
If UlBandWidth is
set to
CELL_BW_N50,
CustomizedULBand
Width must be set
to a value in the
range of 89 to 100;
If UlBandWidth is
set to
CELL_BW_N75,
CustomizedULBand
Width must be set
to a value in the
Radio Planning range of 139 to
98 Cell Read & Write
(Internal planning) 150;
If UlBandWidth is
set to
CELL_BW_N100,
CustomizedULBand
Width must be set
to a value in the
range of 183 to
200.
In a Cell MO, if
CustomizedBandWi
dthCfgInd is set to
CFG,
CustomizedULBand
Width and
CustomizedDLBand
Width cannot both
be set to 14, 50,
100, 150, or 200.
 503;
If
CustomizedDLBand
Width is set to a
value in the range
of 89 to 95,
PhyCellId must be
set to a value in
one of the following
ranges: 4 to 20, 36
to 38, 68 to 70, 79
to 85, 104 to 117,
132 to 134, 164 to
170, 179 to 181,
204 to 213, 229 to
230, 244 to 245,
260 to 270, 292 to
295, 304 to 309,
Radio Planning 340 to 341, 356 to
98 Cell Read & Write
(Internal planning) 370, 388 to 395,
404 to 405, 420,
436 to 437, 454 to
469, and 484 to
495;
If
CustomizedDLBand
Width is set to a
value in the range
of 44 to 47,
PhyCellId must be
set to a value in
one of the following
ranges: 2 to 10, 18,
33 to 35, 40, 52 to
56, 71, 79 to 85, 94
to 97, 102, 110,
117, 127 to 132,
140 to 147, 156,

NOT_CFG(Not Default/Recommen
Cell None Read & Write
configure) ded Value
 EmergencyAreaId
is optional,
depending on the
setting of
EmergencyAreaIdC
fgInd.
If
EmergencyAreaIdC
Radio Planning fgInd is set to CFG,
None Cell Read & Write
(Internal planning) EmergencyAreaId
must be set.
If
EmergencyAreaIdC
fgInd is set to
NOT_CFG,
EmergencyAreaId
does not need to be
set.

NOT_CFG(Not Default/Recommen
Cell None Read & Write
configure) ded Value

When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
BOOLEAN_TRUE,
Default/Recommen the range of the
23 Cell Read & Write
ded Value UePowerMax is
-30~33.
If
UePowerMaxCfgInd
is set to CFG,
UePowerMax must
be set.
If
UePowerMaxCfgInd
is set to NOT_CFG,
UePowerMax does
not need to be set.
 NATION,
respectively,
TxRxMode must be
set to 2T2R.
In a Cell MO, if
CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or
2T2R.
BOOLEAN_FALSE( Radio Planning
Cell In a Cell MO, if Read & Write
False) (Internal planning)
CellActiveState is
CELL_ACTIVE,
FddTddInd is set to
CELL_FDD, and
CPRICompression
is set to
NORMAL_COMPR
ESSION,
TxRxMode must be
set to 1T1R, 1T2R,
2T2R, 2T4R, 4T4R,
2T8R, or 4T8R.
In a Cell MO, if
FddTddInd is set to
TDD,
MultiRruCellFlag
and
MultiRruCellMode
 CellActiveState,
MultiRruCellFlag,
and
MultiRruCellMode
are set to
CELL_ACTIVE,
BOOLEAN_TRUE,
and
DIGITAL_COMBINA
TION, respectively,
TxRxMode must be
set to 1T1R or
2T2R.
In a Cell MO, if
CellActiveState is
CELL_ACTIVE,
FddTddInd is set to
CELL_FDD, and
Radio Planning CPRICompression
SFN(SFN) Cell Read & Write
(Internal planning) is set to
NORMAL_COMPR
ESSION,
TxRxMode must be
set to 1T1R, 1T2R,
2T2R, 2T4R, 4T4R,
2T8R, or 4T8R.
In a Cell MO, if
FddTddInd is set to
TDD,
MultiRruCellFlag
and
MultiRruCellMode
are set to
BOOLEAN_TRUE
and
MPRU_AGGREGA
TION, respectively,
TxRxMode must be
 must be set
NO_COMPRESSIO
N.
In the Cell MO, if
FddTddInd is
CELL_TDD and
DlBandWidth is
CELL_BW_N50,
CPRICompression
can be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION.
In a Cell MO, when
FddTddInd is set to
CELL_FDD, the
actual value range
NO_COMPRESSIO Radio Planning of
Cell Read & Write
N(No Compression) (Internal planning) CPRICompression
varies depending
on the DlBandWidth
parameter setting. If
DlBandWidth is set
to CELL_BW_N6 or
CELL_BW_N15,
CPRICompression
must be set to
NO_COMPRESSIO
N. If DlBandWidth is
set to
CELL_BW_N25,
CPRICompression
can be set to
NO_COMPRESSIO
N or
NORMAL_COMPR
ESSION. If
If the
MultiRruCellMode
parameter is set to
SFN, the
SectorEqmNum
parameter must be
Radio Planning set.
None Cell Read & Write
(Internal planning) If the
MultiRruCellMode
parameter is not set
to SFN, the
SectorEqmNum
parameter does not
need to be set.
 CELL_BW_N15/CE
LL_BW_N25;
CELL_BW_N15/CE
LL_BW_N50;
CELL_BW_N25/CE
LL_BW_N15;
CELL_BW_N25/CE
LL_BW_N25;
CELL_BW_N25/CE
LL_BW_N50;
CELL_BW_N50/CE
LL_BW_N15;
CELL_BW_N50/CE
LL_BW_N25;
CELL_BW_N50/CE
LL_BW_N50;
CELL_BW_N100/C
ELL_BW_N25;
Default/Recommen
None Cell CELL_BW_N100/C Read & Write
ded Value
ELL_BW_N50.
In a Cell MO, if
AirCellFlag is set to
BOOLEAN_TRUE,
RootSequenceIdx
must be set to a
value smaller than
or equal to 69.
When the
AirCellFlag in Cell
MO is
BOOLEAN_TRUE,
the range of the
UePowerMax is
-27~36.
When the
AirCellFlag in Cell
MO is not
 to CELL_TDD,
4T4R, and
CRS_PORT_2,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T2P_0011,
4T2P_0101, or
4T2P_0110.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
8T8R, and
CRS_PORT_2,
respectively,
Radio Planning CrsPortMap must
None Cell Read & Write
(Internal planning) be set to
NOT_CFG,
8T2P_00001111,
8T2P_00110011, or
8T2P_01010101.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
4T4R, and
CRS_PORT_4,
respectively,
CrsPortMap must
be set to
NOT_CFG,
4T4P_0213,
4T4P_0231,
4T4P_0123, or
 CrsPortMap must
be set to
NOT_CFG,
4T4P_0213,
4T4P_0231,
4T4P_0123,
4T4P_0132,
4T4P_0312, or
4T4P_0321.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_FDD,
4T4R, and
CRS_PORT_2,
respectively,
CrsPortMap must
Radio Planning
None Cell be set to Read & Write
(Internal planning)
NOT_CFG,
4T2P_0011,
4T2P_0101, or
4T2P_0110.
In a Cell MO, if
FddTddInd,
TxRxMode, and
CrsPortNum are set
to CELL_TDD,
4T4R, and
CRS_PORT_1,
respectively,
CrsPortMap must
be set to
NOT_CFG.
In a Cell MO, if
FddTddInd,
TxRxMode, and

Radio Planning
None Cell None Read & Write
(Internal planning)
 In a Cell MO, if
FddTddInd and
WorkMode are set
to CELL_FDD and
DL_ONLY,
respectively,
DlBandWidth must
be set to
CELL_BW_N25,
CELL_BW_N50,
UL_DL(Uplink and Radio Planning
Cell CELL_BW_N75, or Read & Write
downlink) (Internal planning)
CELL_BW_N100.
In a Cell MO,
WorkMode must be
set to UL_DL if
FddTddInd is set to
CELL_TDD.
In a Cell MO, if
FreqBand is set to
29, WorkMode must
be set to DL_ONLY.

In a Cell MO,
MultiRruCellFlag
set to
BOOLEAN_TRUE
and
MultiRruCellMode
set to SFN or
Radio Planning MPRU_AGGREGA
None Cell Read & Write
(Internal planning) TION, or
MultiRruCellFlag
set to
BOOLEAN_FALSE
if
EuCellStandbyMod
e is set to
STANDBY.
recommended. FddTddInd,
3. In a TDD cell with TxRxMode, and
four TX channels CrsPortNum are set
and two CRS ports to CELL_TDD,
configured, the 8T8R, and
parameter value CRS_PORT_1,
4T2P_0011 is respectively,
recommended. CrsPortMap must
4. In a TDD cell with be set to
four TX channels NOT_CFG.
and four CRS ports In a Cell MO, if
configured, the FddTddInd,
parameter value TxRxMode, and
4T4P_0213 is CrsPortNum are set
recommended. to CELL_TDD,
5. In a TDD cell in 4T4R, and
broadcast CRS_PORT_2,
beamforming and respectively,
Default/Recommen
with eight TX Cell CrsPortMap must Read & Write
ded Value
channels and two be set to
CRS ports NOT_CFG,
configured, the 4T2P_0011,
parameter value 4T2P_0101, or
8T2P_00001111 is 4T2P_0110.
recommended. In a Cell MO, if
6. In a TDD cell in FddTddInd,
phase shift diversity TxRxMode, and
and with eight TX CrsPortNum are set
channels and two to CELL_TDD,
CRS ports 8T8R, and
configured, the CRS_PORT_2,
parameter value respectively,
8T2P_00110011 is CrsPortMap must
recommended. be set to
7. In a TDD cell in NOT_CFG,
broadcast 8T2P_00001111,
beamforming and 8T2P_00110011, or

2_TO_1(2:1 Radio Planning

Cell None Read & Write
Compression) (Internal planning)
None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only
None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

Radio Planning
None Cell None Read & Write
(Internal planning)
 Radio Planning
None Cell None Read Only
(Internal planning)

If a valid operator
must be configured,
set this parameter
to a value within the
Default/Recommen
range of 0 to 5. If Cell None Read & Write
ded Value
an invalid operator
must be configured,
set this parameter
to 255.

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

Default/Recommen
ms10(ms10) Cell None Read & Write
ded Value

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

BOOLEAN_TRUE( Default/Recommen
Cell None Read & Write
True) ded Value

ALLOWED(ALLOW Radio Planning

Cell None Read & Write
ED) (Internal planning)
 Radio Planning
None Cell None Read & Write
(Internal planning)

MACRO(MACRO) Engineering Design Cell None Read & Write

Radio Planning
0 Cell None Read & Write
(Internal planning)

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

Radio Planning
None Cell None Read & Write
(Internal planning)

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

None N/A Cell None Read Only

SECTORID on
Radio Planning which SectorEqmId
None SfnAuxResBind Read Only
(Internal planning) depends must have
been configured.

Radio Planning
None SfnAuxResBind None Read Only
(Internal planning)

Radio Planning
None SfnAuxResBind None Read Only
(Internal planning)

Default/Recommen
None SfnAuxResBind None Read & Write
ded Value

Radio Planning
None SfnAuxResBind None Read & Write
(Internal planning)

Default/Recommen
None SfnAuxResBind None Read & Write
ded Value
 Default/Recommen
None SfnAuxResBind None Read & Write
ded Value

SECTORID on
Radio Planning which SectorEqmId
None SfnAuxResGrpBind Read Only
(Internal planning) depends must have
been configured.

Radio Planning
None SfnAuxResGrpBind None Read Only
(Internal planning)

Radio Planning
None SfnAuxResGrpBind None Read Only
(Internal planning)
 Default/Recommen
None SfnAuxResGrpBind None Read & Write
ded Value

Radio Planning
None SfnAuxResGrpBind None Read & Write
(Internal planning)

Radio Planning
None SfnAuxResGrpBind None Read & Write
(Internal planning)

Radio Planning
None SfnAuxResGrpBind None Read Only
(Internal planning)

Default/Recommen
None SfnAuxResGrpBind None Read & Write
ded Value
 Radio Planning
None SfnCellBind None Read Only
(Internal planning)

Radio Planning
None SfnCellBind None Read Only
(Internal planning)

Radio Planning
None CellBackOff None Read Only
(Internal planning)

In the CellBackOff
MO, the
RBPriMcsSelectSto
pPrbThd parameter
Default/Recommen
50 CellBackOff must be set to a Read & Write
ded Value
value smaller than
that of the
InterFreqBackoffPrb
Thd parameter.
 Default/Recommen
5 CellBackOff None Read & Write
ded Value
 In the CellBackOff
MO, the
RBPriMcsSelectTrig
PrbThd parameter
Default/Recommen
10 CellBackOff must be set to a Read & Write
ded Value
value smaller than
that of the
RBPriMcsSelectSto
pPrbThd parameter.
 In the CellBackOff
MO, the
RBPriMcsSelectTrig
PrbThd parameter
must be set to a
value smaller than
that of the
RBPriMcsSelectSto
Default/Recommen pPrbThd parameter.
30 CellBackOff Read & Write
ded Value In the CellBackOff
MO, the
RBPriMcsSelectSto
pPrbThd parameter
must be set to a
value smaller than
that of the
InterFreqBackoffPrb
Thd parameter.
 In the CellBackOff
MO, the
LowestEffDlMcsThd
parameter must be
Default/Recommen
5 CellBackOff set to a value Read & Write
ded Value
smaller than or
equal to that of the
LowEffDlMcsThd
parameter.

In the CellBackOff
MO, the
LowestEffDlMcsThd
parameter must be
Default/Recommen
10 CellBackOff set to a value Read & Write
ded Value
smaller than or
equal to that of the
LowEffDlMcsThd
parameter.
 Default/Recommen
125 CellBackOff None Read & Write
ded Value

Default/Recommen
0 CellBackOff None Read & Write
ded Value
 In the CellBackOff
MO, the
LowestEffUlMcsThd
parameter must be
Default/Recommen
5 CellBackOff set to a value Read & Write
ded Value
smaller than or
equal to that of the
LowEffUlMcsThd
parameter.

In the CellBackOff
MO, the
LowestEffUlMcsThd
parameter must be
Default/Recommen
10 CellBackOff set to a value Read & Write
ded Value
smaller than or
equal to that of the
LowEffUlMcsThd
parameter.
 Default/Recommen
125 CellBackOff None Read & Write
ded Value

Default/Recommen
0 CellBackOff None Read & Write
ded Value
 Radio Planning
100 CellBackOff None Read & Write
(Internal planning)

Radio Planning
100 CellBackOff None Read & Write
(Internal planning)

Radio Planning
50 CellBackOff None Read & Write
(Internal planning)

Radio Planning
None CellBf None Read Only
(Internal planning)
SINGLE_LAYER_B
Engineering Design CellBf None Read & Write
F(Single-Layer BF)

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None N/A CellBf None Read Only

None Engineering Design CellBf None Read & Write

Radio Planning
None CellCqiAdjAlgo None Read Only
(Internal planning)
 Default/Recommen
10 CellCqiAdjAlgo None Read & Write
ded Value

Default/Recommen
-4 CellCqiAdjAlgo None Read & Write
ded Value
 Default/Recommen
10 CellCqiAdjAlgo None Read & Write
ded Value

HighSpeedFlag of
cell is set to
ULTRA_HIGH_SPE
ED:32;HighSpeedFl Default/Recommen
CellCqiAdjAlgo None Read & Write
ag of cell is not set ded Value
to
ULTRA_HIGH_SPE
ED:256.

Radio Planning
None CellCsiRsParaCfg None Read Only
(Internal planning)
It is recommended
that this parameter
be set to NOT_CFG
If the CsiRsSwitch
when the
in
EnhMIMOSwitch
CellCsiRsParaCfg
parameter is set to
MO is set to
OFF.
ADAPTIVE_CFG,
It is recommended
The value of
that this parameter
Default/Recommen CsiRsConfigUserRa
be set to CellCsiRsParaCfg Read & Write
ded Value tioTh must be
FIXED_CFG for
greater than the
LTE FDD networks
value of
and to
CsiRsUnconfigUser
ADAPTIVE_CFG
RatioTh in the
for LTE TDD
CellCsiRsParaCfg
networks when the
MO.
EnhMIMOSwitch
parameter is set to
ON.

ms5(ms5) is
recommended for
LTE FDD cells. Default/Recommen
CellCsiRsParaCfg None Read & Write
ms10(ms10) is ded Value
recommended for
LTE TDD cells.

None N/A CellCsiRsParaCfg None Read Only

 Default/Recommen
10 CellCsiRsParaCfg None Read & Write
ded Value
 Default/Recommen
200 CellCsiRsParaCfg None Read & Write
ded Value
 If the CsiRsSwitch
in
30 is recommended
CellCsiRsParaCfg
for LTE FDD ASFN
MO is set to
cells.
ADAPTIVE_CFG,
30 is recommended
The value of
for LTE TDD 4T
Default/Recommen CsiRsConfigUserRa
cells. 50 is CellCsiRsParaCfg Read & Write
ded Value tioTh must be
recommended for
greater than the
LTE TDD 8T cells.
value of
60 is recommended
CsiRsUnconfigUser
for LTE TDD ASFN
RatioTh in the
cells.
CellCsiRsParaCfg
MO.
 If the CsiRsSwitch
in
20 is recommended
CellCsiRsParaCfg
for LTE FDD ASFN
MO is set to
cells.
ADAPTIVE_CFG,
20 is recommended
The value of
for LTE TDD 4T
Default/Recommen CsiRsConfigUserRa
cells. 40 is CellCsiRsParaCfg Read & Write
ded Value tioTh must be
recommended for
greater than the
LTE TDD 8T cells.
value of
50 is recommended
CsiRsUnconfigUser
for LTE TDD ASFN
RatioTh in the
cells.
CellCsiRsParaCfg
MO.

Radio Planning
None CellCspcPara None Read Only
(Internal planning)

Default/Recommen
OFF(Off) CellCspcPara None Read & Write
ded Value

Default/Recommen
OFF(Off) CellCspcPara None Read & Write
ded Value
 Default/Recommen
30 CellCspcPara None Read & Write
ded Value

Default/Recommen
10 CellCspcPara None Read & Write
ded Value

Default/Recommen
FDD: 0; TDD: 25 CellCspcPara None Read & Write
ded Value
 Default/Recommen
10 CellCspcPara None Read & Write
ded Value

Default/Recommen
20 CellCspcPara None Read & Write
ded Value

None N/A CellCspcPara None Read Only

None N/A CellCspcPara None Read Only

None N/A CellCspcPara None Read Only

None N/A CellCspcPara None Read Only

 Radio Planning
None CellDLIcicMcPara None Read Only
(Internal planning)

Default/Recommen
5120ms CellDLIcicMcPara None Read & Write
ded Value

Default/Recommen
8 CellDLIcicMcPara None Read & Write
ded Value
 Default/Recommen
Infinity(Infinity) CellDLIcicMcPara None Read & Write
ded Value

SAME_AS_TRIG_
Default/Recommen
QUAN(Same as CellDLIcicMcPara None Read & Write
ded Value
Trig Quan)

Default/Recommen
RSRP CellDLIcicMcPara None Read & Write
ded Value
 Default/Recommen
4 CellDLIcicMcPara None Read & Write
ded Value

Default/Recommen
640ms CellDLIcicMcPara None Read & Write
ded Value
 Default/Recommen
-13 CellDLIcicMcPara None Read & Write
ded Value
 Default/Recommen
-13 CellDLIcicMcPara None Read & Write
ded Value

Radio Planning
None CellDss None Read Only
(Internal planning)

None Engineering Design CellDss None Read & Write

None Engineering Design CellDss None Read & Write

None Engineering Design CellDss None Read & Write

ADAPTIVEPROCE
SS(ADAPTIVEPRO Engineering Design CellDss None Read & Write
CESS)
None Engineering Design CellDss None Read & Write
None Engineering Design CellDss None Read & Write
0 Engineering Design CellDss None Read & Write
0 Engineering Design CellDss None Read & Write
2 Engineering Design CellDss None Read & Write

ECOCONFIG( ECO
CONFIG), which
enables smooth
Engineering Design CellDss None Read & Write
upgrade and
therefore is
recommended.

Radio Planning CellDynAcBarAlgoP

None None Read Only
(Internal planning) ara

CellDynAcBarAlgoP
20 Engineering Design None Read & Write
ara
 In the
CellDynAcBarAlgoP
ara MO,
CellDynAcBarAlgoP DynAcBarTriggerTh
100 Engineering Design Read & Write
ara d must be greater
than
DynAcBarCancelTh
d.

In the
CellDynAcBarAlgoP
ara MO,
CellDynAcBarAlgoP DynAcBarTriggerTh
80 Engineering Design Read & Write
ara d must be greater
than
DynAcBarCancelTh
d.

CellDynAcBarAlgoP
2 Engineering Design None Read & Write
ara
 CellDynAcBarAlgoP
1 Engineering Design None Read & Write
ara

ETWS_PN:On,
CellDynAcBarAlgoP
ETWS_PN_TEST:O Engineering Design None Read & Write
ara
ff, CMAS:Off

CellDynAcBarAlgoP
60 Engineering Design None Read & Write
ara
 CellDynAcBarAlgoP
2 Engineering Design None Read & Write
ara

CellDynAcBarAlgoP
1 Engineering Design None Read & Write
ara

Radio Planning
None CellEicic None Read Only
(Internal planning)
SUBFRAME_ONE_
PER_FIVE(One Engineering Design CellEicic None Read & Write
ABS per 5 ms)

DISABLE(Disable) Engineering Design CellEicic None Read & Write

 Default/Recommen
-10 CellEicic None Read & Write
ded Value

10 Engineering Design CellEicic None Read & Write

Radio Planning
None CellFrameOffset None Read Only
(Internal planning)
 Default/Recommen
None CellFrameOffset None Read & Write
ded Value

None Engineering Design CellFrameOffset None Read & Write

Radio Planning
None CellIIcsPara None Read Only
(Internal planning)
 Radio Planning
-30 CellIIcsPara None Read & Write
(Internal planning)
 Radio Planning
-112 CellIIcsPara None Read & Write
(Internal planning)

Radio Planning
None CellLowPower None Read Only
(Internal planning)

OFF(Off) Engineering Design CellLowPower None Read & Write

If the
LowPwrSwitch
parameter is set to
ON, the
LowPwrOrder
parameter must be
Default/Recommen set.
OFF(Off) CellLowPower Read & Write
ded Value If the
LowPwrSwitch
parameter is set to
OFF, the
LowPwrOrder
parameter does not
need to be set.
 If the LowPwrOrder
parameter is set to
OFF, the StartTime
parameter must be
Default/Recommen set.
00:00:00 CellLowPower Read & Write
ded Value If the LowPwrOrder
parameter is set to
ON, the StartTime
parameter does not
need to be set.

If the LowPwrOrder
parameter is set to
OFF, the StopTime
parameter must be
Default/Recommen set.
06:00:00 CellLowPower Read & Write
ded Value If the LowPwrOrder
parameter is set to
ON, the StopTime
parameter does not
need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrReduc
eTimeLen
parameter must be
set.
Default/Recommen
120 CellLowPower If the Read & Write
ded Value
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the
CellUsedPwrReduc
eTimeLen
parameter does not
need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrReduceTime
Len parameter
must be set.
Default/Recommen If the
120 CellLowPower Read & Write
ded Value BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the
RsPwrReduceTime
Len parameter
does not need to be
set.
 If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RfShutDownTimeLe
n parameter must
be set.
Default/Recommen
120 CellLowPower If the Read & Write
ded Value
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the
RfShutDownTimeLe
n parameter does
not need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
CellUsedPwrRatio
parameter must be
set.
Default/Recommen
50 CellLowPower If the Read & Write
ded Value
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the
CellUsedPwrRatio
parameter does not
need to be set.

If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
RsPwrAdjOffset
parameter must be
Default/Recommen set.
-1 CellLowPower Read & Write
ded Value If the
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the RsPwrAdjOffset
parameter does not
need to be set.
 If the
BakPwrSavPolicy
parameter is set to
CUSTOMIZED, the
EnterTimeLen
parameter must be
Default/Recommen set.
5 CellLowPower Read & Write
ded Value If the
BakPwrSavPolicy
parameter is not set
to CUSTOMIZED,
the EnterTimeLen
parameter does not
need to be set.

CUSTOMIZED(Cus Default/Recommen
CellLowPower None Read & Write
tomized) ded Value

Radio Planning
None CellMBMSCfg None Read Only
(Internal planning)

Radio Planning
None CellMBMSCfg None Read Only
(Internal planning)

0 Engineering Design CellMBMSCfg None Read & Write

Radio Planning
None CellMBMSCfg None Read Only
(Internal planning)
MBMSSwitch:Off Engineering Design CellMBMSCfg None Read & Write

None Engineering Design CellMBMSCfg None Read & Write

Radio Planning
None CellMBMSCfg None Read Only
(Internal planning)

SERVICECONTINU Default/Recommen
CellMBMSCfg None Read & Write
ITYSWITCH:Off ded Value

NEIGHCELLCONFI
Default/Recommen
GADAPTIVESWITC CellMBMSCfg None Read & Write
ded Value
H:Off

Radio Planning
None CellMlbUeSel None Read Only
(Internal planning)

Radio Planning
255 CellMlbUeSel None Read & Write
(Internal planning)
 Radio Planning
0 CellMlbUeSel None Read & Write
(Internal planning)

Radio Planning
0 CellMlbUeSel None Read & Write
(Internal planning)

Radio Planning
0 CellMlbUeSel None Read & Write
(Internal planning)

Radio Planning
1 CellMlbUeSel None Read & Write
(Internal planning)

Default/Recommen
0 CellMlbUeSel None Read & Write
ded Value

Radio Planning
None CellMro None Read Only
(Internal planning)
NOT_CFG(Not
Engineering Design CellMro None Read & Write
configure)
 In the CellMro MO,
if CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
If CioAdjLimitCfgInd
dB24(24dB) Engineering Design CellMro Read & Write
is set to CFG,
CioAdjUpperLimit
must be set.
If CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjUpperLimit
does not need to be
set.
 In the CellMro MO,
if CioAdjLimitCfgInd
is set to CFG,
CioAdjLowerLimit
must be smaller
than
CioAdjUpperLimit.
If CioAdjLimitCfgInd
dB-24(-24dB) Engineering Design CellMro Read & Write
is set to CFG,
CioAdjLowerLimit
must be set.
If CioAdjLimitCfgInd
is set to NOT_CFG,
CioAdjLowerLimit
does not need to be
set.

Default/Recommen
None CellMro None Read & Write
ded Value

Default/Recommen
None CellMro None Read & Write
ded Value

Default/Recommen
None CellMro None Read & Write
ded Value

Default/Recommen
None CellMro None Read & Write
ded Value
 Default/Recommen
None CellMro None Read & Write
ded Value

None N/A CellPcAlgo None Read Only

SrsPcStrategy:SRS
PC_SINR_RSRP_B
ASED. If the
SRSPC_SINR_RS
RP_BASED(SRSP
C_SINR_RSRP_BA
SED) check box is
selected, the
number of RRC
Connection
Reconfiguration Engineering Design CellPcAlgo None Read & Write
messages is greatly
reduced. Therefore,
it is recommended
that this check box
be selected in
scenarios that are
sensitive to RRC
Connection
Reconfiguration
messages.
NOT_USE_P0NOM
INALPUCCH(Not Default/Recommen
CellPcAlgo None Read & Write
Use ded Value
P0NominalPUCCH)

Default/Recommen
10 CellPcAlgo None Read & Write
ded Value
 Default/Recommen
0 CellPcAlgo None Read & Write
ded Value

Default/Recommen
-82 CellPcAlgo None Read & Write
ded Value
-10 Engineering Design CellPcAlgo None Read & Write
ON
In scenarios where
the IoT value is
greater than 7 dB, it
is recommended
Default/Recommen
that this parameter CellPcAlgo None Read & Write
ded Value
be set to ON to
ensure the average
cell throughput after
IoT power control is
enabled.
140dB Engineering Design CellPcAlgo None Read & Write

Default/Recommen
1 CellPcAlgo None Read & Write
ded Value
 Default/Recommen
-118 CellPcAlgo None Read & Write
ded Value

Set this parameter

to 8 when the
network load is
light, which leads to
optimal uplink
throughput.
Engineering Design CellPcAlgo None Read & Write
Set this parameter
to ADAPTIVE when
the network load is
heavy, which leads
to optimal uplink
throughput.
If interference from
an external source
exists, set this
parameter to
UsOrUlBigPkt after
the
CloseLoopOptPUS
CHSwitch(CloseLoo
pOptPUSCHSwitch)
check box under Engineering Design CellPcAlgo None Read & Write
the UlPcAlgoSwitch
parameter is
selected, which
reduces the
interference on
neighboring cells
caused by
optimized closed-
loop power control.
 Radio Planning
2 CellPcAlgo None Read & Write
(Internal planning)
 Radio Planning
8 CellPcAlgo None Read & Write
(Internal planning)
ON
It is recommended
that this parameter
be set to ON when
interference-based
uplink power control
Engineering Design CellPcAlgo None Read & Write
is enabled. This
ensures
interference-based
uplink power control
to be enabled more
accurately.

125 Engineering Design CellPcAlgo None Read & Write

-111 Engineering Design CellPcAlgo None Read & Write

None N/A CellPrbValMlb None Read Only

80 N/A CellPrbValMlb None Read & Write

80 N/A CellPrbValMlb None Read & Write

0 N/A CellPrbValMlb None Read & Write

Default/Recommen
10 CellPrbValMlb None Read & Write
ded Value

Radio Planning
None CellRachAlgo None Read Only
(Internal planning)
 Radio Planning
None CellRachAlgo None Read & Write
(Internal planning)
 Radio Planning
None CellRachAlgo None Read & Write
(Internal planning)

Radio Planning
None CellRachAlgo None Read Only
(Internal planning)

Radio Planning
None CellRachAlgo None Read Only
(Internal planning)

Radio Planning
None CellRachAlgo None Read Only
(Internal planning)

Radio Planning
None CellRachAlgo None Read Only
(Internal planning)
 Default/Recommen
None CellRachAlgo None Read & Write
ded Value

Default/Recommen
None CellRachAlgo None Read & Write
ded Value
 Default/Recommen
None CellRachAlgo None Read & Write
ded Value

Radio Planning
None CellRacThd None Read Only
(Internal planning)

In the CellRacThd
MO,
GoldServiceArpThd
5 Engineering Design CellRacThd must be smaller Read & Write
than
SilverServiceArpTh
d.

In the CellRacThd
MO,
GoldServiceArpThd
10 Engineering Design CellRacThd must be smaller Read & Write
than
SilverServiceArpTh
d.
 In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci1HoThd must be
smaller than or
90 Engineering Design CellRacThd equal to 100. Read & Write
In the CellRacThd
MO, the sum of
Qci1CongThd and
CongRelOffset
must be smaller
than Qci1HoThd.

In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci2HoThd must be
smaller than or
90 Engineering Design CellRacThd equal to 100. Read & Write
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than Qci2HoThd.
 In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci3HoThd must be
smaller than or
90 Engineering Design CellRacThd equal to 100. Read & Write
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.

In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci4HoThd must be
smaller than or
90 Engineering Design CellRacThd equal to 100. Read & Write
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.
 In the CellRacThd
MO,
NewGoldServiceOff
5 Engineering Design CellRacThd set must be smaller Read & Write
than or equal to
NewSilverServiceOf
fset.
 In the CellRacThd
MO,
NewGoldServiceOff
set must be smaller
than or equal to
NewSilverServiceOf
fset.
5 Engineering Design CellRacThd Read & Write
In the CellRacThd
MO,
NewSilverServiceOf
fset must be smaller
than or equal to
NewCopperService
Offset.
 In the CellRacThd
MO,
NewSilverServiceOf
fset must be smaller
than or equal to
NewCopperService
Offset.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci1HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService
5 Engineering Design CellRacThd Offset and Read & Write
Qci2HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci3HoThd must be
smaller than or
equal to 100.
In the CellRacThd
MO, the sum of
NewCopperService
Offset and
Qci4HoThd must be
smaller than or
equal to 100.
 In the CellRacThd
MO, the sum of
Qci1CongThd and
65 Engineering Design CellRacThd Read & Write
CongRelOffset
must be smaller
than Qci1HoThd.
 In the CellRacThd
MO, the sum of
Qci2CongThd and
65 Engineering Design CellRacThd Read & Write
CongRelOffset
must be smaller
than Qci2HoThd.
 In the CellRacThd
MO, the sum of
Qci3CongThd and
65 Engineering Design CellRacThd Read & Write
CongRelOffset
must be smaller
than Qci3HoThd.
 In the CellRacThd
MO, the sum of
Qci4CongThd and
65 Engineering Design CellRacThd Read & Write
CongRelOffset
must be smaller
than Qci4HoThd.
 In the CellRacThd
MO, the sum of
Qci1CongThd and
CongRelOffset
must be smaller
than Qci1HoThd.
In the CellRacThd
MO, the sum of
Qci2CongThd and
CongRelOffset
must be smaller
than Qci2HoThd.
20 Engineering Design CellRacThd Read & Write
In the CellRacThd
MO, the sum of
Qci3CongThd and
CongRelOffset
must be smaller
than Qci3HoThd.
In the CellRacThd
MO, the sum of
Qci4CongThd and
CongRelOffset
must be smaller
than Qci4HoThd.
 In the CellRacThd
MO, UlRbHighThd
95 Engineering Design CellRacThd Read & Write
must be greater
than UlRbLowThd.
 In the CellRacThd
MO, UlRbHighThd
90 Engineering Design CellRacThd Read & Write
must be greater
than UlRbLowThd.

0 Engineering Design CellRacThd None Read & Write

Radio Planning
None CellRfShutdown None Read Only
(Internal planning)

OFF(Off) Engineering Design CellRfShutdown None Read & Write

 Default/Recommen
00:00:00 CellRfShutdown None Read & Write
ded Value

Default/Recommen
06:00:00 CellRfShutdown None Read & Write
ded Value

3 Engineering Design CellRfShutdown None Read & Write

In the
CellRfShutdown
MO, the sum of
0 Engineering Design CellRfShutdown DlPrbThd and Read & Write
DlPrbOffset must
be smaller than or
equal to 100.

In the
CellRfShutdown
MO, the sum of
0 Engineering Design CellRfShutdown UlPrbThd and Read & Write
UlPrbOffset must
be smaller than or
equal to 100.

In the
CellRfShutdown
MO, the sum of
0 Engineering Design CellRfShutdown DlPrbThd and Read & Write
DlPrbOffset must
be smaller than or
equal to 100.
 In the
CellRfShutdown
MO, the sum of
0 Engineering Design CellRfShutdown UlPrbThd and Read & Write
UlPrbOffset must
be smaller than or
equal to 100.

Default/Recommen
0 CellRfShutdown None Read & Write
ded Value
None N/A CellRfShutdown None Read Only
None N/A CellRfShutdown None Read Only

Radio Planning
None CellRicAlgo None Read Only
(Internal planning)

The value OFF is

recommended if
there is no remote
interference to the
cell.
Engineering Design CellRicAlgo None Read & Write
The value ON is
recommended if
there is remote
interference to the
cell.
The value 0 is
recommended if
there is no remote
interference to the
cell.
Engineering Design CellRicAlgo None Read & Write
The value 1 is
recommended if
there is remote
interference to the
cell.

Radio Planning
OFF(Off) CellRicAlgo None Read & Write
(Internal planning)

Radio Planning
None CellServiceDiffCfg None Read Only
(Internal planning)
 When both of
DSCPRemarkSwitc
CellConStaReportS
h(DSCPRemarkSwi
witch:Off,
tch) and
FPIGTPUSwitch:Off
FPIGTPUSwitch(FP
,
Engineering Design CellServiceDiffCfg IGTPUSwitch) are Read & Write
DSCPRemarkSwitc
turned on, only the
h:Off,
former ralated
CellUuConStaRepo
feature is enabled
rtSwitch:Off
actually, but not the
later.

In the
CellServiceDiffCfg
MO, the
CellConStatePrbTh
Default/Recommen d parameter must
75 CellServiceDiffCfg Read & Write
ded Value be set to a value
smaller than that of
the
CellOverloadStateP
rbThd parameter.
 In the
CellServiceDiffCfg
MO, the
CellConStatePrbTh
Default/Recommen d parameter must
85 CellServiceDiffCfg Read & Write
ded Value be set to a value
smaller than that of
the
CellOverloadStateP
rbThd parameter.
 In the
CellServiceDiffCfg
MO, the
CellConStateUeNu
mThd parameter
Default/Recommen
150 CellServiceDiffCfg must be set to a Read & Write
ded Value
value smaller than
that of the
CellOverloadStateU
eNumThd
parameter.
 In the
CellServiceDiffCfg
MO, the
CellConStateUeNu
mThd parameter
Default/Recommen
200 CellServiceDiffCfg must be set to a Read & Write
ded Value
value smaller than
that of the
CellOverloadStateU
eNumThd
parameter.

10 Engineering Design CellServiceDiffCfg None Read & Write

1 Engineering Design CellServiceDiffCfg None Read & Write

10 Engineering Design CellServiceDiffCfg None Read & Write

10 Engineering Design CellServiceDiffCfg None Read & Write

10 Engineering Design CellServiceDiffCfg None Read & Write

10 Engineering Design CellServiceDiffCfg None Read & Write

10 Engineering Design CellServiceDiffCfg None Read & Write

Radio Planning
None CellShutdown None Read Only
(Internal planning)

OFF(Off) Engineering Design CellShutdown None Read & Write

Default/Recommen
00:00:00 CellShutdown None Read & Write
ded Value

Default/Recommen
06:00:00 CellShutdown None Read & Write
ded Value
 In the
CellShutdown MO,
the sum of
Default/Recommen
20 CellShutdown DlPrbThd and Read & Write
ded Value
DlPrbOffset must
be smaller than or
equal to 100.
In the
CellShutdown MO,
the sum of
Default/Recommen
20 CellShutdown DlPrbThd and Read & Write
ded Value
DlPrbOffset must
be smaller than or
equal to 100.
In the
CellShutdown MO,
the sum of
Default/Recommen
20 CellShutdown UlPrbThd and Read & Write
ded Value
UlPrbOffset must
be smaller than or
equal to 100.
In the
CellShutdown MO,
the sum of
Default/Recommen
20 CellShutdown UlPrbThd and Read & Write
ded Value
UlPrbOffset must
be smaller than or
equal to 100.

Radio Planning
None CellSrlte None Read Only
(Internal planning)

Default/Recommen
OFF(Off) CellSrlte None Read & Write
ded Value
 Default/Recommen
6 CellSrlte None Read & Write
ded Value

Default/Recommen
10 CellSrlte None Read & Write
ded Value
 Radio Planning
None CellULIcicMcPara None Read Only
(Internal planning)

Default/Recommen
-10 CellULIcicMcPara None Read & Write
ded Value

Radio Planning
None CellUlschAlgo None Read Only
(Internal planning)
Scenario A: The
EPF policy is
recommended on
live networks.
Scenario B: The
MAX_CI policy is
recommended
when the operator
or Huawei desires
to verify the system
performance in
maximum
capacities.
Scenario C: The PF
policy is
recommended
when the operator Default/Recommen
CellUlschAlgo None Read & Write
or Huawei desires ded Value
to verify the system
performance in
scenarios where
the capacity,
coverage, and
fairness reach a
tradeoff.
Scenario D: The RR
policy is
recommended
when the operator
or Huawei desires
to verify that each
UE has an equal
opportunity to be
scheduled.
ADAPTIVE_HARQ_
SW_SEMI_ON(Se Engineering Design CellUlschAlgo None Read & Write
miOn)
 Default/Recommen
10 CellUlschAlgo None Read & Write
ded Value

In cells with the

bandwidth of 1.4
MHz, it is
recommended that
this parameter be
set to 50 for Default/Recommen
CellUlschAlgo None Read & Write
preallocation UEs ded Value
within each TTI. In
cells with other
bandwidths, the
recommended
value is 25.
 Default/Recommen
5 CellUlschAlgo None Read & Write
ded Value

Default/Recommen
80 CellUlschAlgo None Read & Write
ded Value

If the switch for

frequency-domain
uplink ICIC in the
frequency domain
is turned on, the
UlHoppingType
HOPPING_OFF(Ho Default/Recommen parameter in the
CellUlschAlgo Read & Write
pping off) ded Value CellUlschAlgo
MO does not take
effect. In this
situation, the
default value
HOPPING_OFF
is retained.

Default/Recommen
0 CellUlschAlgo None Read & Write
ded Value
 Default/Recommen
600 CellUlschAlgo None Read & Write
ded Value

Scenario A: The
recommended
value is 3 if the cell
serves a large
number of cell
center users Default/Recommen
CellUlschAlgo None Read & Write
(CCUs). ded Value
Scenario B: The
recommended
value is 2 in
commercial
networks.
 Default/Recommen
50 CellUlschAlgo None Read & Write
ded Value

EPF_CAPC_FACT Default/Recommen
CellUlschAlgo None Read & Write
OR_1(1) ded Value
FS_INRANDOM_A
DAPTIVE(Fs
Engineering Design CellUlschAlgo None Read & Write
InRandom
Strategy)

CLASS_0(CLASS_ Default/Recommen
CellUlschAlgo None Read & Write
0) ded Value
 Default/Recommen
5 CellUlschAlgo None Read & Write
ded Value

The parameter
value 1500 is
recommended for
ping services.
The Default/Recommen
CellUlschAlgo None Read & Write
SmartPreAllocation ded Value
Duration parameter
value is
recommended for
non-ping services.
 Default/Recommen
ms20(20ms) CellUlschAlgo None Read & Write
ded Value
 Default/Recommen
OFF(Off) CellUlschAlgo None Read & Write
ded Value

Default/Recommen
0 CellUlschAlgo None Read & Write
ded Value
NO_DELAYSCH(N
Default/Recommen
o Delay CellUlschAlgo None Read & Write
ded Value
Scheduling)

Default/Recommen
15 CellUlschAlgo None Read & Write
ded Value
 Default/Recommen
4000 CellUlschAlgo None Read & Write
ded Value

OFF(Off) is
recommended
when
SpsSchSwitch of
the UlSchSwitch
parameter is off; Default/Recommen
CellUlschAlgo None Read & Write
ON is ded Value
recommended
when
SpsSchSwitch of
the UlSchSwitch
parameter is on.

The value
ADAPTIVE_RETX
is recommended for
this parameter Default/Recommen
CellUlschAlgo None Read & Write
when ded Value
PuschDtxSwitch of
the UlSchSwitch
parameter is on.
20 is recommended
for LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
configurations:
12 for uplink-
downlink subframe
configuration 0;
8 for uplink-
downlink subframe
configuration 1;
Radio Planning
4 for uplink- CellUlschAlgo None Read & Write
(Internal planning)
downlink subframe
configuration 2;
6 for uplink-
downlink subframe
configuration 3;
4 for uplink-
downlink subframe
configuration 4;
2 for uplink-
downlink subframe
configuration 5;
10 for uplink-
downlink subframe
configuration 6;
UlVoipPreAllocation
Swtich:Off,
UlVoipDelaySchSwi
tch:Off,
UlVoIPLoadBasedS Default/Recommen
CellUlschAlgo None Read & Write
chSwitch:Off, ded Value
UlVoipSchOptSwitc
h:Off,
UlVoLTEDataSizeE
stSwitch:Off
 Default/Recommen
0 CellUlschAlgo None Read & Write
ded Value

Default/Recommen
-20 CellUlschAlgo None Read & Write
ded Value
N10_TTIB_ENTER( Default/Recommen
CellUlschAlgo None Read & Write
10) ded Value
N20_TTIB_EXIT(20 Default/Recommen
CellUlschAlgo None Read & Write
) ded Value
 Default/Recommen
5 CellUlschAlgo None Read & Write
ded Value
4 is recommended
for LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
configurations:
Default/Recommen
3 for uplink- CellUlschAlgo None Read & Write
ded Value
downlink subframe
configuration 0;
2 for uplink-
downlink subframe
configuration 1;
2 for uplink-
downlink subframe
configuration 6;

n16(16) is
recommended for
LTE FDD cells.
In LTE TDD cells,
the recommended
values vary with
uplink-downlink
subframe
configurations: Default/Recommen
CellUlschAlgo None Read & Write
n8(8) for uplink- ded Value
downlink subframe
configuration 0;
n12(12) for uplink-
downlink subframe
configuration 1;
n8(8) for uplink-
downlink subframe
configuration 6;
SERVICE_VOIP(S Default/Recommen
CellUlschAlgo None Read & Write
ERVICE_VOIP) ded Value

FastReportDopSwit Default/Recommen
CellUlschAlgo None Read & Write
ch:Off ded Value
 Default/Recommen
OFF(OFF) CellUlschAlgo None Read & Write
ded Value

Default/Recommen
10000 CellUlschAlgo None Read & Write
ded Value
 Default/Recommen
10000 CellUlschAlgo None Read & Write
ded Value
The parameter
value 48bit is
recommended in
scenarios where
RLC initial
Default/Recommen
transmission is CellUlschAlgo None Read & Write
ded Value
performed on a
single service and
the MAC layer
sends BSRs or
PHRs.

SAME_AS_OTHER
_SERVICE(SAME_ Default/Recommen
CellUlschAlgo None Read & Write
AS_OTHER_SERVI ded Value
CE)
SAME_AS_OTHER
_SERVICE(SAME_ Default/Recommen
CellUlschAlgo None Read & Write
AS_OTHER_SERVI ded Value
CE)

TWO_MODE_BAS Default/Recommen
CellUlschAlgo None Read & Write
ED_ON_PCI ded Value
 Radio Planning
10 CellUlschAlgo None Read & Write
(Internal planning)

Radio Planning
1800 (Negotiation with CellUlschAlgo None Read & Write
the peer)
None N/A CellULUnifiedOLC None Read Only

In the
CellULUnifiedOLC
MO, the value of
Default/Recommen RrcRejectRateLowT
50 CellULUnifiedOLC Read & Write
ded Value hd must be less
than the value of
RrcRejectRateHigh
Thd.
 In the
CellULUnifiedOLC
MO, the value of
Default/Recommen RrcRejectRateLowT
10 CellULUnifiedOLC Read & Write
ded Value hd must be less
than the value of
RrcRejectRateHigh
Thd.
 In the
CellULUnifiedOLC
MO, the value of
Default/Recommen RrcReqNumLowTh
2000 CellULUnifiedOLC Read & Write
ded Value d must be less than
the value of
RrcReqNumHighTh
d.
 In the
CellULUnifiedOLC
MO, the value of
Default/Recommen RrcReqNumLowTh
1000 CellULUnifiedOLC Read & Write
ded Value d must be less than
the value of
RrcReqNumHighTh
d.
 In the
CellULUnifiedOLC
MO, the value of
Default/Recommen
400 CellULUnifiedOLC UeNumLowThd Read & Write
ded Value
must be less than
the value of
UeNumHighThd.
 In the
CellULUnifiedOLC
MO, the value of
Default/Recommen
250 CellULUnifiedOLC UeNumLowThd Read & Write
ded Value
must be less than
the value of
UeNumHighThd.

Radio Planning
None eNBCellRsvdPara None Read Only
(Internal planning)
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBCellRsvdPara None Read & Write
ded Value

Radio Planning InterRatCellShutdo

None None Read Only
(Internal planning) wn

InterRatCellShutdo
OFF(Off) Engineering Design None Read & Write
wn

Default/Recommen InterRatCellShutdo
03:00:00 None Read & Write
ded Value wn
 Default/Recommen InterRatCellShutdo
05:00:00 None Read & Write
ded Value wn

Default/Recommen InterRatCellShutdo
20 None Read & Write
ded Value wn

Default/Recommen InterRatCellShutdo
10 None Read & Write
ded Value wn
 Default/Recommen InterRatCellShutdo
10 None Read & Write
ded Value wn

Default/Recommon InterRatCellShutdo
None None Read & Write
ded Value wn

Default/Recommon InterRatCellShutdo
5 5 Read & Write
ded Value wn
 In the
InterRatCellShutdo
wn MO, the sum of
values of
Default/Recommon InterRatCellShutdo UtranCellDlLoadTh
30 Read & Write
ded Value wn d and
UtranCellDlLoadOff
set must be less
than or equal to
100.

In the
InterRatCellShutdo
wn MO, the sum of
values of
Default/Recommon InterRatCellShutdo UtranCellDlLoadTh
40 Read & Write
ded Value wn d and
UtranCellDlLoadOff
set must be less
than or equal to
100.

In the
InterRatCellShutdo
wn MO, the sum of
values of
Default/Recommon InterRatCellShutdo UtranCellUlLoadTh
15 Read & Write
ded Value wn d and
UtranCellUlLoadOff
set must be less
than or equal to
100.

In the
InterRatCellShutdo
wn MO, the sum of
values of
Default/Recommon InterRatCellShutdo UtranCellUlLoadTh
40 Read & Write
ded Value wn d and
UtranCellUlLoadOff
set must be less
than or equal to
100.
 In the
InterRatCellShutdo
wn MO, the sum of
values of
Default/Recommon InterRatCellShutdo GeranCellLoadThd
25 Read & Write
ded Value wn and
GeranCellLoadOffs
et must be less
than or equal to
100.

In the
InterRatCellShutdo
wn MO, the sum of
values of
InterRatCellShutdo GeranCellLoadThd
20 N/A Read & Write
wn and
GeranCellLoadOffs
et must be less
than or equal to
100.

Radio Planning
None RruJointCalParaCfg None Read Only
(Internal planning)
ON(On) for 4T4R or Default/Recommen
RruJointCalParaCfg None Read & Write
4T8R cells ded Value

Default/Recommen
03:00:00 RruJointCalParaCfg None Read & Write
ded Value
 Default/Recommen
48 RruJointCalParaCfg None Read & Write
ded Value

Equipment
0 RruJointCalParaCfg None Read & Write
Planning
 Radio Planning
None SuperCombCell None Read Only
(Internal planning)

Radio Planning
None SuperCombCell None Read & Write
(Internal planning)

Radio Planning
None ULZeroBufferZone None Read Only
(Internal planning)

The value of
ULSharedFreqEnd
RB must be greater
than the value of
0 Engineering Design ULZeroBufferZone Read & Write
ULSharedFreqStart
RB in the
ULZeroBufferZone
MO.

The value of
ULSharedFreqEnd
RB must be greater
than the value of
5 Engineering Design ULZeroBufferZone Read & Write
ULSharedFreqStart
RB in the
ULZeroBufferZone
MO.
The value of
ULZeroBufZonePR
BThd must be
greater than the
25 Engineering Design ULZeroBufferZone value of Read & Write
ULZeroBufZonePR
BOffset in the
ULZeroBufferZone
MO.
The value of
ULZeroBufZonePR
BThd must be
greater than the
5 Engineering Design ULZeroBufferZone value of Read & Write
ULZeroBufZonePR
BOffset in the
ULZeroBufferZone
MO.

-80 Engineering Design ULZeroBufferZone None Read & Write

20 Engineering Design ULZeroBufferZone None Read & Write

5 Engineering Design ULZeroBufferZone None Read & Write

-103 Engineering Design ULZeroBufferZone None Read & Write

30 Engineering Design ULZeroBufferZone None Read & Write

Default/Recommen
None UpPTSInterfCfg None Read Only
ded Value

Default/Recommen
50 UpPTSInterfCfg None Read & Write
ded Value

Default/Recommen
-100 UpPTSInterfCfg None Read & Write
ded Value
 Default/Recommen
15 UpPTSInterfCfg None Read & Write
ded Value

Default/Recommen
None UserVpfmPara None Read Only
ded Value

Default/Recommen
500 UserVpfmPara None Read & Write
ded Value

Default/Recommen
1024 UserVpfmPara None Read & Write
ded Value

Default/Recommen
2048 UserVpfmPara None Read & Write
ded Value

Default/Recommen
5120 UserVpfmPara None Read & Write
ded Value

Default/Recommen
10240 UserVpfmPara None Read & Write
ded Value

Default/Recommen
150 UserVpfmPara None Read & Write
ded Value

Default/Recommen
250 UserVpfmPara None Read & Write
ded Value

Default/Recommen
150 UserVpfmPara None Read & Write
ded Value
 Default/Recommen
250 UserVpfmPara None Read & Write
ded Value

Radio Planning
None CellAlgoSwitch None Read Only
(Internal planning)

RachAdjSwitch:Off,
HoRaSwitch:On,
If
UnsyncRaSwitch:O
PrachConfigIndexC
n,
fgInd in the
MaksIdxSwitch:Off,
RACHCfg MO is set
BackOffSwitch:Off,
to NOT_CFG and
UeRaInforInqSwitch
RachAdjSwitch is
:Off,
Engineering Design CellAlgoSwitch on, the RACH Read & Write
PRACHFalseAlarm
resources in the cell
DetSwitch:Off,
can be adaptively
RachPwrAdjSwitch:
adjusted based on
Off,
the access type and
ForbidAcByRadiusS
the number of
witch:Off,
access attempts.
PrachFreqAdjSwitc
h:Off
 If the
SuperCombCellSwit
ch check box under
the SfnAlgoSwitch
parameter in the
CellAlgoSwitch MO
is selected, the
SrsSubframeRecfS
Engineering Design CellAlgoSwitch SrsSubframeRecfS Read & Write
witch:On
witch check box
under the
SrsAlgoSwitch
parameter in the
CellAlgoSwitch MO
must not be
selected.
PucchSwitch:
In ultra-high-speed
scenarios, the
recommended
If either
value is Off.
PucchSwitch or
In other scenarios,
PucchFlexCfgSwitc
the recommended
h of
value is On.
PucchAlgoSwitch in
PucchFlexCfgSwitc
the CellAlgoSwitch
h:
Engineering Design CellAlgoSwitch MO is selected, Read & Write
If PUCCHs
SuperCombCellSwit
experience
ch of SfnAlgoSwitch
interference, the
in the
recommended
CellAlgoSwitch MO
value is On.
must be
If PUCCHs do not
deselected.
experience
interference, the
recommended
value is Off.

AqmAlgoSwitch:Off Engineering Design CellAlgoSwitch None Read & Write

In LTE FDD:
CqiAdjAlgoSwitch:O
n,
StepVarySwitch:Off,
DlVarIBLERtargetS
witch:On,
TddBundlingCqiAdj
OptSwitch:Off,
TddMultiplexingCqi
AdjOptSwitch:Off,
AdaptiveStepVaryS
witch:Off,
DlCqiAdjDeltaOptS
witch:Off,
DlEnVarIblerTarget
Switch:Off,
DlRetxTbsIndexAdj
OptSwitch:Off
In LTE TDD:
Engineering Design CellAlgoSwitch None Read & Write
CqiAdjAlgoSwitch:O
n,
StepVarySwitch:Off,
DlVarIBLERtargetS
witch:Off,
TddBundlingCqiAdj
OptSwitch:Off,
TddMultiplexingCqi
AdjOptSwitch:Off,
AdaptiveStepVaryS
witch:Off,
DlEnVarIblerTarget
Switch:Off,
DlRetxTbsIndexAdj
OptSwitch:Off,
CfiConvertOptSwitc
h:Off,
BundlingOptThdSwi
tch:off

Dynamic Adjust
Engineering Design CellAlgoSwitch None Read & Write
Voltage Switch:Off
dlCacSwitch:Off,
ulCacSwitch:Off,
dlCacPredictSwitch:
Off,
ulCacPredictSwitch:
Off,
GbrUsedPRbCheck
Engineering Design CellAlgoSwitch None Read & Write
Switch:Off,
dlLdcSwitch:Off,
ulLdcSwitch:Off,
LdcDrbRelSwitch:O
ff,
PreemptionSwitch:
Off
load in the cell is
heavy (that is, the
average load in the
cell exceeds the
inter-frequency
MLB threshold) and
there is an
imbalance in the
load between cells
(that is, the load
difference between
cells exceeds the
related threshold).
It is recommended
that the
In a CellAlgoSwitch
UtranMlbSwitch,
MO, the
UtranIdleMlbSwitch,
InterFreqIdleMlbSwi
MlbLoadInfoSwitch,
tch and
GeranMlbSwitch,
Engineering Design CellAlgoSwitch UtranIdleMlbSwitch Read & Write
and
under the
CdmaMlbSwitch
MlbAlgoSwitch
check boxes all be
cannot be turned on
deselected when
simultaneously.
the cell load is light
in an early stage of
network
deployment (that is,
the average cell
load is lower than
70%).
It is recommended
that the
UtranMlbSwitch,
UtranIdleMlbSwitch,
MlbLoadInfoSwitch,
GeranMlbSwitch,
and
CdmaMlbSwitch
PdschSpsPcSwitch:
Off,
PhichInnerLoopPcS
witch:Off,
PdcchPcSwitch:On,

EDlMaxTXPwrSwitc
h:On for single-
mode single-carrier
RRUs, and
EDlMaxTXPwrSwitc Engineering Design CellAlgoSwitch None Read & Write
h:On for multi-mode
RRUs or multi-
carrier RRUs so
that system
performance is not
affected.
BFModeUserPwrS
witch:Off,
SigPowerIncreaseS
witch:Off
CloseLoopSpsSwitc
h:Off,
InnerLoopPuschSwi
tch:On,
PhSinrTarUpdateS
witch:Off,
InnerLoopPucchSwi
tch:On,
OiSinrTarUpdateSw In the
itch:Off, CellAlgoSwitch MO,
PowerSavingSwitch when the
:Off, PucchPcDtxSinrSwi
CloseLoopOptPUS tch in
CHSwitch:Off, Engineering Design CellAlgoSwitch UlPcAlgoSwitch is Read & Write
PucchPcDtxSinrSwi ON, the
tch:Off, InnerLoopPucchSwi
PuschIoTCtrlSwitch tch in
:Off, UlPcAlgoSwitch
SrsPcSwitch:On, must be ON.
NearPointUeOptPU
SCHSwitch:Off,
PuschRsrpHighThd
Switch:Off,
OuterLoopPucchSw
itch:Off,
GroupPCForPucch
Switch:Off

In the
CellAlgoSwitch,
SsrdAlgoSwitch is
BfSwitch:Off Engineering Design CellAlgoSwitch Read & Write
set to On only when
BfAlgoSwitch has
been set to On.
FreqSelSwitch:Off,
ServiceDiffSwitch:O
ff,
SpsSchSwitch:Off,
MBSFNShutDownS
witch:Off,
OutOfBandRelayS
NonGbrBundlingSw
witch under the
itch:Off,
RelaySwitch
EnAperiodicCqiRpt
parameter in the
Switch:Off,
CellAlgoSwitch MO
DlMbrCtrlSwitch:Off
cannot be turned on
,
when
MbrDlSchSwitch:Off
MBSFNShutDownS
,
witch under the
UeAmbrDlSchSwitc
DlSchSwitch
h:Off,
parameter is turned
EpfEnhancedSwitc
Engineering Design CellAlgoSwitch on. Read & Write
h:Off,
If
AperiodicCqiTrigOp
SuperCombCellSwit
tSwitch:Off,
ch of SfnAlgoSwitch
VoipTbsBasedMcsS
in the
elSwitch:Off,
CellAlgoSwitch MO
UeSigMcsEnhance
is set to on,
Switch:Off,
SpsSchSwitch of
DlSingleUsrMcsOpt
DlSchSwitch in the
Switch:Off,
CellAlgoSwitch MO
SubframeSchDiffSw
must be
itch:Off,
deselected.
TailPackagePriSch
Switch:Off,
FreqSelJudgeIgnor
DopplerSwitch:Off,
SIB1InterfRandSwit
ch:On
SmartPreAllocation is set to On only if
Switch:On for FDD UlVmimoSwitch
cells and Off for under UlSchSwitch
TDD cells, in a CellAlgoSwitch
PuschDtxSwitch:On MO is set to On.
, OutOfBandRelayS
UlIblerAdjustSwitch: witch under the
Off, RelaySwitch
UlEnhancedFssSwit parameter in the
ch:On, CellAlgoSwitch MO
UlEnhancedSrSchS cannot be turned on
witch:Off, when
SchedulerCtrlPower TtiBundlingSwitch
Switch:Off, under the
UlIicsAlgoSwitch:Of UlSchSwitch
f, parameter is turned
UlMinGbrSwitch:Off on.
, OutOfBandRelayS
UlMbrCtrlSwitch:Off witch under the
Engineering Design CellAlgoSwitch Read & Write
, RelaySwitch
MbrUlSchSwitch:Off parameter in the
, CellAlgoSwitch MO
UeAmbrUlSchSwitc cannot be turned on
h:Off, when
UlEnhancedDopple UlIicsAlgoSwitch
rSwitch:Off, under the
UlRaUserSchOptS UlSchSwitch
w:Off, parameter is turned
UlLast2RetransSch on.
OptSwitch:Off, If
UlInterfFssSwitch:O SuperCombCellSwit
ff, ch of SfnAlgoSwitch
PrachRbReuseSwit in the
ch:Off CellAlgoSwitch MO
UlSmallRBSpectral is set to on,
EfficiencyOptSw:Off SpsSchSwitch of
, UlSchSwitch in the
PuschUsePucchRb CellAlgoSwitch MO

Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value
FreqPriorIFHOSwitc
h:Off,
FreqPriorIFBlindHO
Switch:On, Default/Recommen
CellAlgoSwitch None Read & Write
MlbBasedFreqPriH ded Value
oSwitch:Off,
A2BasedFreqPriHo
Switch:Off
 In the
CellAlgoSwitch,
MuBfSwitch:Off,
SsrdAlgoSwitch
TM9MuBfSwitch:Off Default/Recommen
CellAlgoSwitch and Read & Write
, ded Value
MuBfAlgoSwitch
EnhMubfSwitch:Off
cannot be set to On
simultaneously.

Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value
 In the
CellAlgoSwitch MO,
if AcBarAlgoSwitch
is set to
ACBAR_SWITCH_
DYNAMIC, either
ACBAR_SWITCH_
the
STATIC(static Engineering Design CellAlgoSwitch Read & Write
DYNAMIC_FOR_M
configuration)
O or
DYNAMIC_FOR_S
SAC option of
AcBarAlgoforDynS
witch must be
selected.

ENABLE(Enable) Engineering Design CellAlgoSwitch None Read & Write

FDD: SFN:
JOINT(Joint In the
scheduling); TDD: CellAlgoSwitch MO,
Indoor SFN: if SfnUlSchSwitch is
JOINT(Joint set to ADAPTIVE or
scheduling), SfnDlSchSwitch is
Engineering Design CellAlgoSwitch Read & Write
Outdoor SFN: set to ADAPTIVE,
ADAPTIVE(Adaptiv SuperCombCellSwit
e scheduling), Cell ch of SfnAlgoSwitch
combination: must be
JOINT(Joint deselected.
scheduling).

FDD: SFN:
JOINT(Joint In the
scheduling); TDD: CellAlgoSwitch MO,
Indoor SFN: if SfnUlSchSwitch is
JOINT(Joint set to ADAPTIVE or
scheduling), SfnDlSchSwitch is
Engineering Design CellAlgoSwitch Read & Write
Outdoor SFN: set to ADAPTIVE,
ADAPTIVE(Adaptiv SuperCombCellSwit
e scheduling), Cell ch of SfnAlgoSwitch
combination: must be
JOINT(Joint deselected.
scheduling).
PucchIrcSwitch:Off,
Engineering Design CellAlgoSwitch None Read & Write
PrachIrcSwitch:Off

DynDrxSwitch:Off,
Engineering Design CellAlgoSwitch None Read & Write
SmartDrxSwitch:Off

DISABLE(Disable) Engineering Design CellAlgoSwitch None Read & Write

AvoidGeranInterfSw
itch:Off
TddAvoidUpPTSInt
erfSwitch:Off
Engineering Design CellAlgoSwitch None Read & Write
AvoidPrachInterfSw
itch:Off
AvoidUtranInterfSwi
tch:Off

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 EicicSwitch in the
CellAlgoSwitch MO
cannot be set to
STATIC or
DYNAMIC when
OFF(Off) Engineering Design CellAlgoSwitch Read & Write
OutOfBandRelayS
witch under the
RelaySwitch
parameter is turned
on.

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 If the
InterDlCompCbfSwi
tch check box
under the
DlCompSwitch
DlCompSwitch:Off Engineering Design CellAlgoSwitch Read & Write
parameter is
selected, the
InterDlCompDcsSwi
tch check box
cannot be cleared.

PsicSwitch in the
CellAlgoSwitch MO
is set to On only if
MuMimoPuschPsic
Engineering Design CellAlgoSwitch UlVmimoSwitch Read & Write
Switch:Off
under UlSchSwitch
in a CellAlgoSwitch
MO is set to On.
InterFreqMlbBlindH
o:Off,
Engineering Design CellAlgoSwitch None Read & Write
InterRatMlbBlindHo:
Off
 In the
CellAlgoSwitch MO,
if
UlJointReceptionPh
aseIISwitch under
UlJointReceptionSw UplinkCompSwitch
itch:Off, is turned on,
UlJointReceptionPh UlJointReceptionSw
aseIISwitch:Off, itch under
UlCompRollbackSw UplinkCompSwitch
itch:On, must also be turned
UlJointReception3C on.
Engineering Design CellAlgoSwitch Read & Write
ellSwitch:Off, In the
UlHetnetJointRecep CellAlgoSwitch MO,
tionSwitch:Off, if
UlHetnetCompMan UlJointReception3C
ualNcellCfgSw:Off, ellSwitch under
UlHetnetCompOnUl UplinkCompSwitch
RsrpSw:Off is turned on,
UlJointReceptionSw
itch under
UplinkCompSwitch
must also be turned
on.

It is recommended
that this switch be
on for two groups of N/A CellAlgoSwitch None Read & Write
4T cross-polarized
antennas.

None Engineering Design CellAlgoSwitch None Read & Write

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write
 In the
CellAlgoSwitch MO,
if SmartIrcSwitch
MrcIrcAdptSwitch:O under
n, PuschIrcAlgoSwitch
SmartIrcSwitch:Off, Engineering Design CellAlgoSwitch is turned on, Read & Write
MrcIrcAdaptivefor2 MrcIrcAdptSwitch
R:Off under
PuschIrcAlgoSwitch
must also be turned
on.

Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value
 ch of SfnAlgoSwitch
must be
deselected.
If either
PucchSwitch or
PucchFlexCfgSwitc
h of
PucchAlgoSwitch in
the CellAlgoSwitch
MO is selected,
SuperCombCellSwit
ch of SfnAlgoSwitch
SfnPdcchDcsSwitch in the
:Off, CellAlgoSwitch MO
SfnUll2SelectiveRc must be
vSwitch:Off,SfnPdc deselected.
chSdmaSwitch:Off, If
SfnPucchAckSdma SuperCombCellSwit
Switch:Off,SuperCo Default/Recommen ch of SfnAlgoSwitch
CellAlgoSwitch Read & Write
mbCellSwitch:Off,Sf ded Value in the
nDl2LoadLevelAdpt CellAlgoSwitch MO
Switch:Off,SfnDlSc is set to on,
hAttriAdjsSwitch:Off SpsSchSwitch of
,SfnCbfSwitch:Off, DlSchSwitch in the
SfnVoLteDlJSchSwi CellAlgoSwitch MO
tch:Off must be
deselected.
If
SuperCombCellSwit
ch of SfnAlgoSwitch
in the
CellAlgoSwitch MO
is set to on,
SpsSchSwitch of
UlSchSwitch in the
CellAlgoSwitch MO
must be
deselected.
OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

TM9Switch(TM9Swi Default/Recommen
CellAlgoSwitch None Read & Write
tch):Off ded Value
 Default/Recommen
OFF(OFF) CellAlgoSwitch None Read & Write
ded Value

AntRsPwrSwitch:Of
Engineering Design CellAlgoSwitch None Read & Write
f
 Radio Planning
None CellAlgoSwitch None Read & Write
(Internal planning)
TddAckFbModeCfg Default/Recommen
CellAlgoSwitch None Read & Write
OptSwitch:Off ded Value
 Default/Recommen
None CellAlgoSwitch None Read & Write
ded Value

Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value
AbnUeSchSwitch:O Default/Recommen
CellAlgoSwitch None Read & Write
ff ded Value

In the
CellAlgoSwitch,
SsrdAlgoSwitch
and
MuBfAlgoSwitch
cannot be set to On
Ssrd8T8RAlgoSwitc Default/Recommen
CellAlgoSwitch simultaneously. Read & Write
h:Off ded Value
In the
CellAlgoSwitch,
SsrdAlgoSwitch is
set to On only when
BfAlgoSwitch has
been set to On.
ch:Turning on this
switch is
recommended
because intra-BBP
UL CoMP can
increase the
average uplink
throughput and
improve the uplink
coverage of an SFN
cell.
InterBaseBandSwit
ch:Turning on this
switch is
recommended
because intra-BBP
UL CoMP can
increase the
average uplink Default/Recommen
CellAlgoSwitch None Read & Write
throughput and ded Value
improve the uplink
coverage of an SFN
cell.
ComCoverUlComp
Switch:Turning off
this switch is
recommended if
multiple RF
modules provide
different coverages
in an SFN cell.
SfnUplinkComp3Ce
llSwitch:Turning on
this switch is
recommended
when an SFN cell is
composed of three
or more physical

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 DYNAMIC when
OutOfBandRelayS
witch under the
RelaySwitch
parameter is turned
on.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
MBSFNShutDownS
witch under the
DlSchSwitch
parameter is turned
on.
OutOfBandRelayS Radio Planning OutOfBandRelayS
CellAlgoSwitch Read & Write
witch:Off (Internal planning) witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
TtiBundlingSwitch
under the
UlSchSwitch
parameter is turned
on.
OutOfBandRelayS
witch under the
RelaySwitch
parameter in the
CellAlgoSwitch MO
cannot be turned on
when
UlIicsAlgoSwitch

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value

CqiReliableSwitch: Default/Recommen
CellAlgoSwitch None Read & Write
Off ded Value
OFF(Off) Engineering Design CellAlgoSwitch None Read & Write
 In the
CellAlgoSwitch MO,
if AcBarAlgoSwitch
is set to
ACBAR_SWITCH_
DYNAMIC_FOR_M DYNAMIC, either
O:On, the
Engineering Design CellAlgoSwitch Read & Write
DYNAMIC_FOR_S DYNAMIC_FOR_M
SAC:Off O or
DYNAMIC_FOR_S
SAC option of
AcBarAlgoforDynS
witch must be
selected.
 Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value

InterFreqBackoffSw Default/Recommen
CellAlgoSwitch None Read & Write
itch:Off ded Value
 Radio Planning
SrvBasedInterFreq
(Negotiation with CellAlgoSwitch None Read & Write
HoSw:On
the peer)
None Engineering Design CellAlgoSwitch None Read & Write
IntraAnrPolicySwitc
h:Off,
Engineering Design CellAlgoSwitch None Read & Write
PciConflictDetectPo
licySwitch:Off

The parameter
value ON(On) is
recommended in
scenarios with the
presence of PIM Default/Recommen
CellAlgoSwitch None Read & Write
interference. ded Value
The parameter
value OFF(Off) is
recommended in
other scenarios.
OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 Default/Recommen
UlCamcSw:Off CellAlgoSwitch None Read & Write
ded Value

Default/Recommen
OFF(Off) CellAlgoSwitch None Read & Write
ded Value
It is recommended
that the
InterfHighSpeedSW
check box be
selected when the
eNodeB is
connected to the
eCoordinator and
interference
coordination for
high-speed railway
scenarios is
required. It is Radio Planning
recommended that (Negotiation with CellAlgoSwitch None Read & Write
this check box be the peer)
deselected in other
scenarios.
It is recommended
that the
HighSpeedUserRed
irectSwitch check
box be selected in
common cells near
the high-speed
railway and
deselected in other
scenarios.
VideoRateAdaptSwi
tch:Off, Radio Planning
CellAlgoSwitch None Read & Write
DownLoadRateLimi (Internal planning)
tSwitch:Off

OFF(Off) Engineering Design CellAlgoSwitch None Read & Write

 Default/Recommen
ON(On) CellAlgoSwitch None Read & Write
ded Value
OFF(Off) Engineering Design CellAlgoSwitch None Read & Write
Ul1R1RJRSwitch:O
ff,
Ul1R2RJRSwitch:O
Default/Recommen
ff,Ul2R8RJRSwitch: CellAlgoSwitch None Read & Write
ded Value
Off,Ul4R8RJRSwitc
h:Off,Ul8R8RJRSwi
tch:Off

VamPhaseShiftAlgo Default/Recommen
CellAlgoSwitch None Read & Write
Switch:Off ded Value
UlHeavyTrafficMlbS Radio Planning
CellAlgoSwitch None Read & Write
witch:Off (Internal planning)

GSM_MEAS_DEL_ Radio Planning

INTERFREQ_SW: (Negotiation with CellAlgoSwitch None Read & Write
Off the peer)

Radio Planning
None CellDlIcic None Read Only
(Internal planning)
If this parameter is
not set to
INVALID(Invalid DL
band division
scheme), it is
recommended that
this parameter be
set to a different
value from those of
neighboring cells. If
it is impossible for
neighboring cells to
Engineering Design CellDlIcic None Read & Write
use mutually
different band
modes, it is
recommended that
this parameter be
set to the same
value as that of a
neighboring cell
that has the
weakest
interference with
the current cell.

Radio Planning
1 CellDlIcic None Read & Write
(Internal planning)
 Radio Planning
38 CellDlIcic None Read & Write
(Internal planning)

Radio Planning
None CellDlpcPdcch None Read Only
(Internal planning)
setting of PaPcOff.
When PaPcOff is
set to -6, you are
advised to set
DediDciPwrOffset
to -60.
When PaPcOff is
set to -4.77, you are
advised to set
DediDciPwrOffset
to -48.
When PaPcOff is
set to -3, you are
advised to set
DediDciPwrOffset
to -30.
When PaPcOff is
set to -1.77, you are
Default/Recommen
advised to set CellDlpcPdcch None Read & Write
ded Value
DediDciPwrOffset
to -18.
When PaPcOff is
set to 0, you are
advised to set
DediDciPwrOffset
to 0.
When PaPcOff is
set to 1, you are
advised to set
DediDciPwrOffset
to 10.
When PaPcOff is
set to 2, you are
advised to set
DediDciPwrOffset
to 20.
When PaPcOff is

Radio Planning
None CellDlpcPdsch None Read Only
(Internal planning)
When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
set to -4.77, you are
advised to set
CcuPa to -6 dB.
When PaPcOff is
set to -3, you are
advised to set
CcuPa to -6 dB.
When PaPcOff is
set to -1.77, you are
advised to set
Default/Recommen
CcuPa to -4.77 dB. CellDlpcPdsch None Read & Write
ded Value
When PaPcOff is
set to 0, you are
advised to set
CcuPa to -3 dB.
When PaPcOff is
set to 1, you are
advised to set
CcuPa to -1.77 dB.
When PaPcOff is
set to 2, you are
advised to set
CcuPa to 0 dB.
When PaPcOff is
set to 3, you are not
advised to enable
the ICIC function.
When PaPcOff is
set to -6, you are
not advised to
enable the ICIC
function.
When PaPcOff is
set to -4.77, you are
advised to set
CeuPa to -3 dB.
When PaPcOff is
set to -3, you are
advised to set
CeuPa to -1.77 dB.
When PaPcOff is
set to -1.77, you are
advised to set
Default/Recommen
CeuPa to 0 dB. CellDlpcPdsch None Read & Write
ded Value
When PaPcOff is
set to 0, you are
advised to set
CeuPa to 1 dB.
When PaPcOff is
set to 1, you are
advised to set
CeuPa to 2 dB.
When PaPcOff is
set to 2, you are
advised to set
CeuPa to 3 dB.
When PaPcOff is
set to 3, you are not
advised to enable
the ICIC function.

Radio Planning
None CellDlpcPhich None Read Only
(Internal planning)
The setting of this
parameter is
recommended to be
the same as the
setting of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PwrOffset to -30.
When PaPcOff is
set to -4.77, you are
advised to set
PwrOffset to -18.
When PaPcOff is
set to -3, you are
advised to set
PwrOffset to 0.
When PaPcOff is Default/Recommen
CellDlpcPhich None Read & Write
set to -1.77, you are ded Value
advised to set
PwrOffset to 12.
When PaPcOff is
set to 0, you are
advised to set
PwrOffset to 30.
When PaPcOff is
set to 1, you are
advised to set
PwrOffset to 40.
When PaPcOff is
set to 2, you are
advised to set
PwrOffset to 50.
When PaPcOff is
set to 3, you are
advised to set
PwrOffset to 60.
Radio Planning
None CellDlschAlgo None Read Only
(Internal planning)
DLSCH_PRI_TYPE Default/Recommen
CellDlschAlgo None Read & Write
_EPF(EPF) ded Value

Default/Recommen
0 CellDlschAlgo None Read & Write
ded Value
If MIMO is not used
for a cell, the value
SW_MAX_SM_RA
NK_1 is
recommended. If
2x2 MIMO is used
for a 2T2R or 2T4R
cell or 4x2 MIMO is
used for a 4T4R
Default/Recommen
cell, the value CellDlschAlgo None Read & Write
ded Value
SW_MAX_SM_RA
NK_2 is
recommended. If
4x4 MIMO is used
for a 4T4R cell, the
value
SW_MAX_SM_RA
NK_4 is
recommended.

BASIC_SCHEDUL Default/Recommen
CellDlschAlgo None Read & Write
E(Basic Schedule) ded Value
 Default/Recommen
0 CellDlschAlgo None Read & Write
ded Value

EPF_CAPC_FACT Default/Recommen
CellDlschAlgo None Read & Write
OR_1(1) ded Value
 Default/Recommen
10 CellDlschAlgo None Read & Write
ded Value

ALL_EDGE_USER( Default/Recommen
CellDlschAlgo None Read & Write
All Edge User) ded Value

EDGE_USER_NO_
Default/Recommen
PRIO(Edge User CellDlschAlgo None Read & Write
ded Value
No Prio)
ROUND_DOWN(R Default/Recommen
CellDlschAlgo None Read & Write
ound Down) ded Value

5 N/A CellDlschAlgo None Read & Write

Default/Recommen
8 CellDlschAlgo None Read & Write
ded Value
 Default/Recommen
60 CellDlschAlgo None Read & Write
ded Value

Default/Recommen
OFF(Off) CellDlschAlgo None Read & Write
ded Value

FROMSCC(FROM Default/Recommen
CellDlschAlgo None Read & Write
SCC) ded Value
 Default/Recommen
ms20(20ms) CellDlschAlgo None Read & Write
ded Value
SINGLEUSER_ST
Default/Recommen
RATEGY(Single CellDlschAlgo None Read & Write
ded Value
User Strategy)
DETECTRANK1AD
JSWITCH;off, Default/Recommen
CellDlschAlgo None Read & Write
DETECTRANK2AD ded Value
JSWITCH:on

SubFrame0(SubFra
me0):Off,
SubFrame1(SubFra
me1):Off,
SubFrame2(SubFra
me2):Off,
SubFrame3(SubFra
me3):Off,
SubFrame4(SubFra
me4):Off,
N/A CellDlschAlgo None Read & Write
SubFrame5(SubFra
me5):Off,
SubFrame6(SubFra
me6):Off,
SubFrame7(SubFra
me7):Off,
SubFrame8(SubFra
me8):Off,
SubFrame9(SubFra
me9):Off
 Default/Recommen
SCH(Schedule) CellDlschAlgo None Read & Write
ded Value

Default/Recommen
0 CellDlschAlgo None Read & Write
ded Value
 Default/Recommen
10000 CellDlschAlgo None Read & Write
ded Value

For a network with

three sectors:
It is recommended
that this parameter
be set to MOD6
when the average
PRB usage in an
area is lower than
or equal to 30%.
It is recommended
that this parameter
be set to MOD3
when the average
PRB usage in an
area is greater than
30%. Default/Recommen
CellDlschAlgo None Read & Write
For a network with ded Value
four sectors:
It is recommended
that this parameter
be set to MOD6
when the average
PRB usage in an
area is lower than
or equal to 30%.
It is recommended
that this parameter
be set to MOD4
when the average
PRB usage in an
area is greater than
30%.
 Default/Recommen
OFF(Off) CellDlschAlgo None Read & Write
ded Value

Default/Recommen
15 CellDlschAlgo None Read & Write
ded Value
1. 400 for 1.4 MHz
cells;
2. 117 for cells in a
Radio Planning
bandwidth of 3 CellDlschAlgo None Read & Write
(Internal planning)
MHz, 5 MHz, 10
MHz, 15 MHz, or 20
MHz.

Default/Recommen
10 CellDlschAlgo None Read & Write
ded Value
UnCfgCsiRsUESch
Engineering Design CellDlschAlgo None Read & Write
Switch:On

Radio Planning
30 CellDlschAlgo None Read & Write
(Internal planning)
 Default/Recommen
10 CellDlschAlgo None Read & Write
ded Value

DlVoIPLoadBasedS Radio Planning

CellDlschAlgo None Read & Write
chSwitch:off (Internal planning)
 Radio Planning
5ms(5ms) CellDlschAlgo None Read & Write
(Internal planning)

Radio Planning
45 (Negotiation with CellDlschAlgo None Read & Write
the peer)

Radio Planning
30 (Negotiation with CellDlschAlgo None Read & Write
the peer)
 Default/Recommen
0 CellDlschAlgo None Read & Write
ded Value

Default/Recommen
OFF(OFF) CellDlschAlgo None Read & Write
ded Value

Default/Recommen
-850 CellDlschAlgo None Read & Write
ded Value

Default/Recommen
-900 CellDlschAlgo None Read & Write
ded Value

Default/Recommen
none CellDlschAlgo None Read Only
ded Value

Default/Recommen
none CellDlschAlgo None Read Only
ded Value

Default/Recommen
none CellDlschAlgo None Read Only
ded Value
CQI_PERIOD_BAS Radio Planning
CellDlschAlgo None Read & Write
ED (Internal planning)

Radio Planning
None CellMLB None Read Only
(Internal planning)
 In the CellMLB MO,
the sum of
InterFreqMlbThd
60 Engineering Design CellMLB and LoadOffset Read & Write
must be smaller
than or equal to
100.
 In the CellMLB MO,
the sum of
InterRatMlbThd and
75 Engineering Design CellMLB Read & Write
LoadOffset must be
smaller than or
equal to 100.

In the CellMLB MO,

the sum of
InterFreqMlbThd
and LoadOffset
must be smaller
than or equal to
Default/Recommen
8 CellMLB 100. Read & Write
ded Value
In the CellMLB MO,
the sum of
InterRatMlbThd and
LoadOffset must be
smaller than or
equal to 100.
 Default/Recommen
15 CellMLB None Read & Write
ded Value

Default/Recommen
15 CellMLB None Read & Write
ded Value
 In the CellMLB MO,
InterRatLoadEvalPr
10 Engineering Design CellMLB d must be greater Read & Write
than or equal to
InitValidPeriod.

Default/Recommen
0 CellMLB None Read & Write
ded Value
PRB_ONLY(PrbMo
Engineering Design CellMLB None Read & Write
de)

In a CellMLB MO,
the sum of
InterFreqMlbUeNu
100 Engineering Design CellMLB mThd and Read & Write
MlbUeNumOffset
must be less than
or equal to 10000.
 In a CellMLB MO,
the sum of
InterFreqMlbUeNu
Default/Recommen
20 CellMLB mThd and Read & Write
ded Value
MlbUeNumOffset
must be less than
or equal to 10000.

Default/Recommen
5 CellMLB None Read & Write
ded Value
 Default/Recommen
2 CellMLB None Read & Write
ded Value

It is recommended
that
DlDataMlbMode be
set to
NON_TRIGGERED
when the cell load
is light and UEs are
evenly distributed in
different cells in an
Default/Recommen
early stage of CellMLB None Read & Write
ded Value
network
deployment. If the
cell load is close to
the full load and
UEs are not
evenly distributed
between cells, set
this parameter to
UeNumBased.
 In the CellMLB MO,
if
InterFreqMLBRanS
hareMode is set to
NON_SHARING(N
Engineering Design CellMLB SHARING,Proportio Read & Write
ON_SHARING)
n under
InterFreqIdleMlbMo
de must be turned
off.

Default/Recommen
15 CellMLB None Read & Write
ded Value
 Default/Recommen
OFF(Off) CellMLB None Read & Write
ded Value

In the CellMLB MO,

if
InterFreqMLBRanS
hareMode is set to
Proportion: Off Engineering Design CellMLB SHARING,Proportio Read & Write
n under
InterFreqIdleMlbMo
de must be turned
off.
For a network with
MLB deployed not
for the first time,
this parameter is
set to 0 by default
after a version
upgrade if this
parameter is
unavailable in the
source version, and
you are advised to
set this parameter
to 10 after the
upgrade. The
upgrade does not
affect the MLB
effects in the live
network. If this
Radio Planning
parameter is CellMLB None Read & Write
(Internal planning)
available in the
source version, you
are advised to
inherit the
parameter value
after the upgrade.
For a network with
MLB deployed for
the first time, you
are advised to set
this parameter to 10
so that the number
of unnecessary
handovers for load
balancing can be
reduced to achieve
better balancing
performance.
For a network with
MLB deployed not
for the first time,
this parameter is
set to 0 by default
after a version
upgrade if this
parameter is
unavailable in the
source version, and
you are advised to
set this parameter
to 5 after the
upgrade. The
upgrade does not
affect the MLB
effects in the live
network. If this
Radio Planning
parameter is CellMLB None Read & Write
(Internal planning)
available in the
source version, you
are advised to
inherit the
parameter value
after the upgrade.
For a network with
MLB deployed for
the first time, you
are advised to set
this parameter to 5
so that the number
of unnecessary
handovers for load
balancing can be
reduced to achieve
better balancing
performance.
SynchronizedUE:O
n, IdleUE:Off,
PrbMlbSynchronize Engineering Design CellMLB None Read & Write
dUE:On,
PrbMlbIdleUE:Off

Default/Recommen
100 CellMLB None Read & Write
ded Value
150 Engineering Design CellMLB None Read & Write

Default/Recommen
30 CellMLB None Read & Write
ded Value
 In the CellMLB MO,
InterRatLoadEvalPr
Default/Recommen
30 CellMLB d must be greater Read & Write
ded Value
than or equal to
InitValidPeriod.
FAIRSTRATEGY(F
Engineering Design CellMLB None Read & Write
airStrategy)
ADAPTIVE(Adaptiv
Engineering Design CellMLB None Read & Write
e)
20 Engineering Design CellMLB None Read & Write

LOADINFOFREQ(L Default/Recommen
CellMLB None Read & Write
OADINFOFREQ) ded Value
PRBRATIOHIGHM
Default/Recommen
ODE(PRBRATIOHI CellMLB None Read & Write
ded Value
GHMODE)

Default/Recommen
2 CellMLB None Read & Write
ded Value

PRB_USAGE(Prb Default/Recommen
CellMLB None Read & Write
Usage) ded Value
 Default/Recommen
120 CellMLB None Read & Write
ded Value
ONLY_TRY_STRO
Default/Recommen
NGEST_CELL(Only CellMLB None Read & Write
ded Value
Try Strongest Cell)

IRAT_PRB_ONLY(
Engineering Design CellMLB None Read & Write
PRB Usage)
 Default/Recommen
150 CellMLB None Read & Write
ded Value

1 Engineering Design CellMLB None Read & Write

4 Engineering Design CellMLB None Read & Write

4 Engineering Design CellMLB None Read & Write

Default/Recommen
PrbUsage: Off CellMLB None Read & Write
ded Value
Null Engineering Design CellMLB None Read & Write
Null Engineering Design CellMLB None Read & Write

Null Engineering Design CellMLB None Read & Write

 Radio Planning
5 CellMLB None Read & Write
(Internal planning)

Radio Planning
None CellUSParaCfg None Read Only
(Internal planning)
UsUeGuaranteeSwi
tch:Off,
UsHoSwitch:Off,
UsCellReselSwitch:
Off,
UsUePuschPcPriori
tySwitch:Off,
Radio Planning
DlUsVoIPCqiAdjOpt CellUSParaCfg None Read & Write
(Internal planning)
Switch:Off,
UsCellNotDriveNsS
witch:Off,
NsRbRestrictSwitch
:Off,
UsCtrlDRXSwitch:O
ff

Radio Planning
5 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
1 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
80 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
80 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
1500 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
1500 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
5 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
5 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
255 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
15 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
60 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
-106 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
-24 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
255 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
255 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
DB_6_P_A(-6 dB) CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
50 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
60 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)

Radio Planning
0 CellUSParaCfg None Read & Write
(Internal planning)
 Radio Planning
None CellPdcchAlgo None Read Only
(Internal planning)

CONGREG_LV4 Engineering Design CellPdcchAlgo None Read & Write

ON(On) Engineering Design CellPdcchAlgo None Read & Write

40 Engineering Design CellPdcchAlgo None Read & Write
occupied by the
PDCCH is turned
on, this parameter
is invalid for the
bandwidths of 1.4
MHz and 3 MHz,
and the
recommended
value for the
bandwidths larger
than 5 MHz is 1. If
the switch for
dynamic adjustment
on the number of
OFDM symbols
occupied by the
PDCCH is turned
off, set this
parameter to 4 for
Engineering Design CellPdcchAlgo None Read & Write
the bandwidth of
1.4 MHz and to 3
for other
bandwidths. In
addition, if this
switch is turned off
for a small-
bandwidth cell,
PDCCH resources
may be insufficient
due to the smaller
number of occupied
OFDM symbols,
and accordingly
UEs cannot access
the cell. In this
scenario, set this
parameter to 3 for
the bandwidth of

0 Engineering Design CellPdcchAlgo None Read & Write

In non-ultra-high-
speed scenarios
where the eNodeB
operates in FDD
mode, the
parameter value
Engineering Design CellPdcchAlgo None Read & Write
ECFIADAPTIONON
is recommended. In
other scenarios, the
parameter value
OFF is
recommended.
lower limit is 65
when the eNodeB
uses four physical
antenna ports and
is 58 when the
eNodeB uses two
physical antenna
ports;
(4) If the cell
bandwidth and the
number of PDCCH
symbols are 15
MHz and 1,
respectively, the
lower limit is 100
when the eNodeB
uses either two or
four physical
antenna ports; Engineering Design CellPdcchAlgo None Read & Write
(5) If the cell
bandwidth and the
number of PDCCH
symbols are 15
MHz and 2,
respectively, the
lower limit is 80
when the eNodeB
uses four physical
antenna ports and
is 63 when the
eNodeB uses two
physical antenna
ports;
(6) If the cell
bandwidth and the
number of PDCCH
symbols are 15

ON(On) Engineering Design CellPdcchAlgo None Read & Write

OFF(Off) Engineering Design CellPdcchAlgo None Read & Write

AVERAGE(AVERA
Engineering Design CellPdcchAlgo None Read & Write
GE)
STRATEGYBASED
ONCAPACITY(Cap
Engineering Design CellPdcchAlgo None Read & Write
acity-based
Selection Strategy)
 Default/Recommen
OFF(Off) CellPdcchAlgo None Read & Write
ded Value

Default/Recommen
75 CellPdcchAlgo None Read & Write
ded Value
If the PDCCH
Symbol Number
Adjust Switch
parameter is set to
OFF, you are
advised to set this
parameter to 3.
Engineering Design CellPdcchAlgo None Read & Write
If the PDCCH
Symbol Number
Adjust Switch
parameter is set to
ON, you are
advised to set this
parameter to 1.
STRATEGYBASED
ONCOVERAGE(Co
Engineering Design CellPdcchAlgo None Read & Write
verage-based
Selection Strategy)
 Default/Recommen
1 CellPdcchAlgo None Read & Write
ded Value
 Default/Recommen
24 CellPdcchAlgo None Read & Write
ded Value
ReserveCommonC Default/Recommen
CellPdcchAlgo None Read & Write
CESwitch:Off ded Value

Radio Planning
1_2(1:2) CellPdcchAlgo None Read & Write
(Internal planning)
OFF(Off) Engineering Design CellPdcchAlgo None Read & Write

15 is recommended
in most scenarios.
Do not change the Default/Recommen
CellPdcchAlgo None Read & Write
parameter value ded Value
unless it is
necessary.
 Default/Recommen
OFF(Off) CellPdcchAlgo None Read & Write
ded Value

Radio Planning
None CellPucchAlgo None Read Only
(Internal planning)
SA0 or SA1, the
recommended
value is 0 for
bandwidths of 1.4
MHz and 3 MHz,
and 5 for
bandwidths of 5
MHz, 10 MHz, 15
MHz, and 20 MHz.
In TDD mode with
the
SubframeAssignme
nt parameter set to
SA2 or SA5, the
recommended
value is 0 for all
bandwidths.
If a competition test
on the access delay Default/Recommen
CellPucchAlgo None Read & Write
or handover delay ded Value
is to be conducted
with UL
preallocation
disabled, set this
parameter to a
value greater than
1.
It is recommended
that the default
value of the
parameter be
retained. If
adjustments are
mandatory, avoid
setting this
parameter to an
excessively large
value as it may lead
 Default/Recommen
FALSE(FALSE) CellPucchAlgo None Read & Write
ded Value
SriAdaptiveHoldFor
VoIPSW:Off, Default/Recommen
CellPucchAlgo None Read & Write
SriPeriodCfgOptSW ded Value
:Off

Radio Planning CellCounterParaGr

None None Read Only
(Internal planning) oup

Default/Recommen CellCounterParaGr
400 None Read & Write
ded Value oup
 Default/Recommen CellCounterParaGr
OFF(Off) None Read & Write
ded Value oup

BasedA3EdgeUser Default/Recommen CellCounterParaGr

None Read & Write
Switch:Off ded Value oup
 Default/Recommen CellCounterParaGr
-13 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
512 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
1024 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
2048 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
5120 None Read & Write
ded Value oup
 Default/Recommen CellCounterParaGr
10240 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
15360 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
20480 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
40960 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
81920 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
256 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
512 None Read & Write
ded Value oup
 Default/Recommen CellCounterParaGr
1024 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
2048 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
5120 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
10240 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
15360 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
20480 None Read & Write
ded Value oup

Default/Recommen CellCounterParaGr
40960 None Read & Write
ded Value oup

Radio Planning TddCellFrameOffse

None None Read Only
(Internal planning) t
 Default/Recommen TddCellFrameOffse
None None Read & Write
ded Value t

If FrameOffsetMode
is set to
TddCellFrameOffse
None Engineering Design CustomFrameOffse Read & Write
t
t, CellFrameOffset
must be set.

Radio Planning CellNoAccessAlmP

None None Read Only
(Internal planning) ara

In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime,
Default/Recommen CellNoAccessAlmP
00:00:00 NoAccessDetectTi Read & Write
ded Value ara
mer must be
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.

In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime,
Default/Recommen CellNoAccessAlmP
00:00:00 NoAccessDetectTi Read & Write
ded Value ara
mer must be
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.
 In the
CellNoAccessAlmP
ara MO, if
NoAccessStartDete
ctTime is different
from
NoAccessStopDete
ctTime,
Default/Recommen CellNoAccessAlmP
0 NoAccessDetectTi Read & Write
ded Value ara
mer must be
smaller than the
time difference
between
NoAccessStartDete
ctTime and
NoAccessStopDete
ctTime.

Radio Planning
None CellUlIcic None Read Only
(Internal planning)

If this parameter is
not set to
INVALID(Invalid UL
band division
scheme), it is
recommended that
this parameter be
set to different
values in
neighboring cells. If
it is impossible for
neighboring cells to
Engineering Design CellUlIcic None Read & Write
use mutually
different band
modes, it is
recommended that
this parameter be
set to the same
value in
neighboring cells
that has the
weakest
interference to each
other.

Radio Planning
None GeranInterfCfg None Read Only
(Internal planning)
Set this parameter
based on the
number of RBs Engineering Design GeranInterfCfg None Read & Write
interfered by the
GERAN cell.

-3 Engineering Design GeranInterfCfg None Read & Write

Radio Planning
None CellRelayAlgoPara None Read Only
(Internal planning)

Radio Planning
None CellRelayAlgoPara None Read & Write
(Internal planning)
 Radio Planning
None CellRelayAlgoPara None Read & Write
(Internal planning)

Radio Planning
5 CellRelayAlgoPara None Read & Write
(Internal planning)

Radio Planning
80 CellRelayAlgoPara None Read & Write
(Internal planning)

Radio Planning
None CellSimuLoad None Read Only
(Internal planning)

Default/Recommen
4 CellSimuLoad None Read & Write
ded Value
 Default/Recommen
TM2(TM2) CellSimuLoad None Read & Write
ded Value

Default/Recommen
null CellSimuLoad None Read & Write
ded Value

None N/A CellSimuLoad None Read Only

None N/A CellSimuLoad None Read Only

None N/A CellSimuLoad None Read Only

None N/A CellSimuLoad None Read Only

None N/A CellSimuLoad None Read Only

None N/A CellSimuLoad None Read Only

Radio Planning SfnEdgeRruRelatio

None None Read Only
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

None None Read Only
(Internal planning) n
 Mcc in an
Radio Planning SfnEdgeRruRelatio SfnEdgeRruRelatio
None Read & Write
(Internal planning) n n MO consists of
digits only.

Mnc in an
Radio Planning SfnEdgeRruRelatio SfnEdgeRruRelatio
None Read & Write
(Internal planning) n n MO consists of
digits only.

Radio Planning SfnEdgeRruRelatio

None None Read & Write
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

None None Read & Write
(Internal planning) n

Radio Planning SfnEdgeRruRelatio

None None Read & Write
(Internal planning) n

Radio Planning
None BcchCfg None Read Only
(Internal planning)

MOD_PERIOD_CO Default/Recommen
BcchCfg None Read & Write
EFF_N2(2) ded Value

Radio Planning
None CellChPwrCfg None Read Only
(Internal planning)
advised to set
PcfichPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PcfichPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PcfichPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
PcfichPwr to 600.
In LTE TDD, if the
cell bandwidth is
10, 15, or 20 MHz,
you are advised to
Default/Recommen
set PcfichPwr to the CellChPwrCfg None Read & Write
ded Value
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PcfichPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PcfichPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PcfichPwr to 0.
When PaPcOff is
set to -1.77, you are
advised to set
PcfichPwr to 246.
parameter is
recommended to be
the same as the
setting of PaPcOff.
PbchPwr can be set
as follows:
When PaPcOff is
set to -6, you are
advised to set
PbchPwr to -1200.
When PaPcOff is
set to -4.77, you are
advised to set
PbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
PbchPwr to -600.
Default/Recommen
When PaPcOff is CellChPwrCfg None Read & Write
ded Value
set to -1.77, you are
advised to set
PbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
PbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
PbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
PbchPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
SchPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
SchPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
SchPwr to 0.
When PaPcOff is Default/Recommen
CellChPwrCfg None Read & Write
set to -1.77, you are ded Value
advised to set
SchPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
SchPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
SchPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
SchPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
SchPwr to 1200.
parameter is
recommended to be
the same as the
setting of PaPcOff.
DbchPwr can be
set as follows:
When PaPcOff is
set to -6, you are
advised to set
DbchPwr to -1200.
When PaPcOff is
set to -4.77, you are
advised to set
DbchPwr to -954.
When PaPcOff is
set to -3, you are
advised to set
DbchPwr to -600.
Default/Recommen
When PaPcOff is CellChPwrCfg None Read & Write
ded Value
set to -1.77, you are
advised to set
DbchPwr to -354.
When PaPcOff is
set to 0, you are
advised to set
DbchPwr to 0.
When PaPcOff is
set to 1, you are
advised to set
DbchPwr to 200.
When PaPcOff is
set to 2, you are
advised to set
DbchPwr to 400.
When PaPcOff is
set to 3, you are
advised to set
is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PchPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PchPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PchPwr to 0.
When PaPcOff is Default/Recommen
CellChPwrCfg None Read & Write
set to -1.77, you are ded Value
advised to set
PchPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
PchPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
PchPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
PchPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
PchPwr to 1200.
is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
RaRspPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
RaRspPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
RaRspPwr to 0.
When PaPcOff is Default/Recommen
CellChPwrCfg None Read & Write
set to -1.77, you are ded Value
advised to set
RaRspPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
RaRspPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
RaRspPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
RaRspPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
RaRspPwr to 1200.
is 10, 15, or 20
MHz, you are
advised to set this
parameter to the
value of PaPcOff
plus 3 dB.
When PaPcOff is
set to -6, you are
advised to set
PrsPwr to -600.
When PaPcOff is
set to -4.77, you are
advised to set
PrsPwr to -354.
When PaPcOff is
set to -3, you are
advised to set
PrsPwr to 0.
When PaPcOff is Default/Recommen
CellChPwrCfg None Read & Write
set to -1.77, you are ded Value
advised to set
PrsPwr to 246.
When PaPcOff is
set to 0, you are
advised to set
PrsPwr to 600.
When PaPcOff is
set to 1, you are
advised to set
PrsPwr to 800.
When PaPcOff is
set to 2, you are
advised to set
PrsPwr to 1000.
When PaPcOff is
set to 3, you are
advised to set
PrsPwr to 1200.

Default/Recommen
20 CellChPwrCfg None Read & Write
ded Value
 Radio Planning
None CellChPwrCfg None Read & Write
(Internal planning)

Radio Planning
None PDSCHCfg None Read Only
(Internal planning)

Default/Recommen
None PDSCHCfg None Read & Write
ded Value
Single-antenna: 0; Default/Recommen
PDSCHCfg None Read & Write
double-antenna: 1 ded Value

Default/Recommen
None PDSCHCfg None Read & Write
ded Value

Radio Planning
None RACHCfg None Read Only
(Internal planning)

DB2_PWR_RAMPI Default/Recommen
RACHCfg None Read & Write
NG_STEP(2dB) ded Value
DBM_104(- Default/Recommen
RACHCfg None Read & Write
104dBm) ded Value

None N/A RACHCfg None Read Only

B56_MSG_SIZE_G Default/Recommen
RACHCfg None Read & Write
ROUPA(56bits) ded Value
 The
PrachFreqOffset
parameter can be
manually
configured only
when PucchSwitch
of the
PucchAlgoSwitch
parameter in the
CellAlgoSwitch MO
is turned off.
The
PrachFreqOffset
parameter must be
properly set so that
the PRACH RBs
are strictly confined
to the cell
6 Engineering Design RACHCfg Read & Write
bandwidth.
Otherwise, the cell
cannot be
activated.
The
PrachFreqOffset
parameter must be
properly set so that
the PRACH RBs
and PUCCH RBs
do not overlap in
the frequency
domain when the
cell bandwidth is
not 1.4 MHz.
Otherwise, the cell
cannot be
activated.

If RachAdjSwitch in
the CellAlgoSwitch
MO is turned on
NOT_CFG(Not Default/Recommen and this parameter
RACHCfg Read & Write
configure) ded Value is set to CFG, this
parameter takes
precedence over
RachAdjSwitch.
can be set to 63 or
a value in the range
of 48 to 53.
For TDD cells
established on an
LBBPd or UBBP:
If a cell is
configured with
HighSpeedFlag of
LOW_SPEED and
preamble format of
0:
Subframe
assignment of 0,
this parameter can
be set to a value in
the range of 0 to 8. The setting of this
Subframe parameter takes
assignment of 1, effect only when the
Engineering Design RACHCfg Read & Write
this parameter can PrachConfigIndexC
be set to a value in fgInd parameter is
the range of 0 to 7. set to CFG.
Subframe
assignment of 2,
this parameter can
be set to 6 or a
value in the range
of 0 to 4.
Subframe
assignment of 5,
this parameter can
be set to 3, 0, or 1.
If a cell is
configured with
HighSpeedFlag of
LOW_SPEED and
preamble format of
1:

N10_PREMB_TRA Default/Recommen
RACHCfg None Read & Write
NS_MAX(10times) ded Value
SF64_MAC_RESO
Default/Recommen
LUTION_TIMER(64 RACHCfg None Read & Write
ded Value
)

Default/Recommen
5 RACHCfg None Read & Write
ded Value

Radio Planning
Ratio52(52/64) RACHCfg None Read & Write
(Internal planning)
It is recommended
that this parameter
be set based on the
counters
L.RA.GrpA.Att
(indicating the
number of group A
random preambles
received) and
L.RA.GrpB.Att
Radio Planning
(indicating the RACHCfg None Read & Write
(Internal planning)
number of group B
random preambles
received). That is,
set this parameter
based on the value
calculated by the
following formula:
L.RA.GrpA.Att/
(L.RA.GrpA.Att+L.R
A.GrpB.Att).

Radio Planning
None SRSCfg None Read Only
(Internal planning)

The value SC3(3) is

recommended for
FDD cells.
Engineering Design SRSCfg None Read & Write
The value SC0(0) is
recommended for
TDD cells.
BOOLEAN_TRUE( Default/Recommen
SRSCfg None Read & Write
True) ded Value
BOOLEAN_TRUE( Default/Recommen
SRSCfg None Read & Write
True) ded Value
 If the SrsCfgInd
parameter is set to
TRUE, the
TddSrsCfgMode
parameter must be
ACCESS_ENHANC
set.
ED(Access Engineering Design SRSCfg Read & Write
If the SrsCfgInd
Enhanced)
parameter is not set
to TRUE, the
TddSrsCfgMode
parameter does not
need to be set.
The parameter
value
ADAPTIVEMODE(A
daptive Mode) is
recommended for
common cells. The
parameter value
N/A SRSCfg None Read & Write
DEFAULTMODE(D
efault Mode) is
recommended for
SFN cells, CSPC
cells, high-speed
cells, and ultra-
high-speed cells.

None N/A SRSCfg None Read Only

Radio Planning
None PHICHCfg None Read Only
(Internal planning)
 Default/Recommen
NORMAL PHICHCfg None Read & Write
ded Value

Default/Recommen
ONE PHICHCfg None Read & Write
ded Value

Radio Planning
None PCCHCfg None Read Only
(Internal planning)
rf128(128 radio Default/Recommen
PCCHCfg None Read & Write
frames) ded Value

Default/Recommen
ONET PCCHCfg None Read & Write
ded Value
 Default/Recommen
1 PCCHCfg None Read & Write
ded Value
1. 16 for cells in a
bandwidth of 20
MHz or 15 MHz;
2. 8 for cells in a
Default/Recommen
bandwidth of 10 PCCHCfg None Read & Write
ded Value
MHz or 5 MHz;
3. 4 for cells in a
bandwidth of 3.3
MHz or 1.4 MHz.
PAGING_STRATE
GY_FIFO(First-in Engineering Design PCCHCfg None Read & Write
First-out Strategy)

Radio Planning
None PUSCHCfg None Read Only
(Internal planning)
are set to
HOPPING_TYPE2
and
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2
and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended
value of this
parameter is 1. Default/Recommen
PUSCHCfg None Read & Write
If UlHoppingType ded Value
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTER_SUB_FRA
ME, respectively,
the recommended
value of this
parameter is 4.
If UlHoppingType
and HoppingMode
are set to
HOPPING_TYPE2_
RANDOM and
INTRA_AND_INTE
R_SUB_FRAME,
respectively, the
recommended

INTER_SUB_FRA Default/Recommen
PUSCHCfg None Read & Write
ME(Inter) ded Value
corresponding to
cell bandwidths in
ascending order; if
DeltaShift is set to
DS3_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
9, 16, 21, and 24,
corresponding to
cell bandwidths in
ascending order.
In TDD cells with
the uplink-downlink
subframe
configuration of
SA1 and with the
extended CP
Default/Recommen
length, if DeltaShift PUSCHCfg None Read & Write
ded Value
is set to
DS2_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
6, 11, 16, and 19,
corresponding to
cell bandwidths in
ascending order;if
DeltaShift is set to
DS3_DELTA_SHIFT
, the recommended
values of this
parameter are 0, 0,
8, 15, 22, and 26,
corresponding to
cell bandwidths in
ascending order.
BOOLEAN_FALSE(
Engineering Design PUSCHCfg None Read & Write
False)
0 Engineering Design PUSCHCfg None Read & Write
BOOLEAN_FALSE(
Engineering Design PUSCHCfg None Read & Write
False)

Default/Recommen
0 PUSCHCfg None Read & Write
ded Value
It is recommended
that this parameter
be set to
BOOLEAN_FALSE(
False) by default in Engineering Design PUSCHCfg None Read & Write
TDD networks
because the UL
64QAM feature is
license-controlled.

Radio Planning
None PUCCHCfg None Read Only
(Internal planning)

For a cell
established on an
LBBPc and
configured with the
normal cyclic prefix
(CP), the parameter
value
DS2_DELTA_SHIF
T is recommended.
For a cell
established on an
LBBPc and
configured with the
extended CP, the
parameter value
DS3_DELTA_SHIF
Default/Recommen
T is recommended. PUCCHCfg None Read & Write
ded Value
For a cell
established on an
LBBPd or UBBP
and configured with
the normal CP, the
parameter value
DS1_DELTA_SHIF
T is recommended.
For a cell
established on an
LBBPd or UBBP
and configured with
extended CP, the
parameter value
DS3_DELTA_SHIF
T is recommended.
 This parameter can
be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
The NaSriChNum
parameter must be
6 Engineering Design PUCCHCfg Read & Write
properly set so that
the PRACH RBs
and PUCCH RBs
do not overlap in
the frequency
domain when the
cell bandwidth is
not 1.4 MHz.
Otherwise, the cell
cannot be
activated.

This parameter can

be set only if
PucchAlgoSwitch in
the CellAlgoSwitch
MO is turned off.
Otherwise, the
parameter setting
does not take
effect.
1 Engineering Design PUCCHCfg This parameter Read & Write
must be properly
set so that the
PRACH RBs and
PUCCH RBs do not
overlap in the
frequency domain.
Otherwise, the cell
cannot be
activated.
None Engineering Design PUCCHCfg None Read & Write

None N/A PUCCHCfg None Read Only

When the number
of UEs in the cell is
small (in newly
deployed sites or in
off-peak hours), this
parameter can be
set to either
FIXEDMODE(Fixed
Mode) or Default/Recommen
PUCCHCfg None Read & Write
RANDOMMODE(R ded Value
andom Mode).
When the number
of UEs in the cell is
large, the
parameter value
RANDOMMODE(R
andom Mode) is
recommended.
QCIADAPTIVE(QCI
Engineering Design PUCCHCfg None Read & Write
ADAPTIVE)

Radio Planning Cdma20001XrttPre

None None Read Only
(Internal planning) Reg

Mcc in an
Radio Planning Cdma20001XrttPre Cdma20001XrttPre
None Read Only
(Internal planning) Reg Reg MO consists of
digits only.

Mnc in an
Radio Planning Cdma20001XrttPre Cdma20001XrttPre
None Read Only
(Internal planning) Reg Reg MO consists of
digits only.
 Radio Planning Cdma20001XrttPre
None None Read & Write
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

None None Read & Write
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

None None Read & Write
(Internal planning) Reg

Radio Planning Cdma20001XrttPre

None None Read & Write
(Internal planning) Reg

MscId in the
Cdma20001XrttPre
Reg MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
Cdma20001XrttPre number is
None Engineering Design Read & Write
Reg composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

NOT_CFG(Not Radio Planning Cdma20001XrttPre

None Read & Write
configure) (Internal planning) Reg
 If BandClassInclude
is set to CFG,
BandClass must be
Default/Recommen Cdma20001XrttPre set.
bc3(bc3) Read & Write
ded Value Reg If BandClassInclude
is set to NOT_CFG,
BandClass does
not need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If CsfbRegCfgInd is
set to CFG,
MultiSidInd must be
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre set.
Read & Write
False) ded Value Reg If CsfbRegCfgInd is
set to NOT_CFG,
MultiSidInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
MultiNidInd must be
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre set.
Read & Write
False) ded Value Reg If CsfbRegCfgInd is
set to NOT_CFG,
MultiNidInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
HomeRegInd must
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre be set.
Read & Write
False) ded Value Reg If CsfbRegCfgInd is
set to NOT_CFG,
HomeRegInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
ForeignSidRegInd
must be set.
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
If CsfbRegCfgInd is Read & Write
False) ded Value Reg
set to NOT_CFG,
ForeignSidRegInd
does not need to be
set.
 If CsfbRegCfgInd is
set to CFG,
ForeignNidRegInd
must be set.
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
If CsfbRegCfgInd is Read & Write
False) ded Value Reg
set to NOT_CFG,
ForeignNidRegInd
does not need to be
set.

If CsfbRegCfgInd is
set to CFG,
ParamRegInd must
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre be set.
Read & Write
False) ded Value Reg If CsfbRegCfgInd is
set to NOT_CFG,
ParamRegInd does
not need to be set.

If CsfbRegCfgInd is
set to CFG,
PowerUpRegInd
must be set.
BOOLEAN_FALSE( Default/Recommen Cdma20001XrttPre
If CsfbRegCfgInd is Read & Write
False) ded Value Reg
set to NOT_CFG,
PowerUpRegInd
does not need to be
set.

If CsfbRegCfgInd is
set to CFG,
RegPeriod must be
Radio Planning Cdma20001XrttPre set.
0 Read & Write
(Internal planning) Reg If CsfbRegCfgInd is
set to NOT_CFG,
RegPeriod does not
need to be set.

If CsfbRegCfgInd is
set to CFG,
RegZone must be
Radio Planning Cdma20001XrttPre set.
0 Read & Write
(Internal planning) Reg If CsfbRegCfgInd is
set to NOT_CFG,
RegZone does not
need to be set.

If CsfbRegCfgInd is
set to CFG,
TotalZone must be
Radio Planning Cdma20001XrttPre set.
1 Read & Write
(Internal planning) Reg If CsfbRegCfgInd is
set to NOT_CFG,
TotalZone does not
need to be set.
 If CsfbRegCfgInd is
set to CFG,
ZoneTimer must be
Radio Planning Cdma20001XrttPre set.
7 Read & Write
(Internal planning) Reg If CsfbRegCfgInd is
set to NOT_CFG,
ZoneTimer does not
need to be set.

If CsfbRegCfgInd is
set to CFG,
PowerDownInclude
must be set.
NOT_CFG(Not Default/Recommen Cdma20001XrttPre
If CsfbRegCfgInd is Read & Write
configure) ded Value Reg
set to NOT_CFG,
PowerDownInclude
does not need to be
set.

If CsfbRegCfgInd is
set to CFG,
AcBarCfgInd must
NOT_CFG(Not Default/Recommen Cdma20001XrttPre be set.
Read & Write
configure) ded Value Reg If CsfbRegCfgInd is
set to NOT_CFG,
AcBarCfgInd does
not need to be set.

If AcBarCfgInd is
set to CFG,
AcBar0to9 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar0to9 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBar10 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar10 does not
need to be set.
 If AcBarCfgInd is
set to CFG,
AcBar11 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar11 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBar12 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar12 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBar13 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar13 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBar14 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar14 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBar15 must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBar15 does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBarMsg must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBarMsg does not
need to be set.
 If AcBarCfgInd is
set to CFG,
AcBarReg must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBarReg does not
need to be set.

If AcBarCfgInd is
set to CFG,
AcBarEmg must be
Default/Recommen Cdma20001XrttPre set.
0 Read & Write
ded Value Reg If AcBarCfgInd is
set to NOT_CFG,
AcBarEmg does not
need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If ProtocolRevInc is
set to CFG,
ProtocolRev must
Radio Planning Cdma20001XrttPre be set.
6 Read & Write
(Internal planning) Reg If ProtocolRevInc is
set to NOT_CFG,
ProtocolRev does
not need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If
MinProtocolRevInc
is set to CFG,
MinProtocolRev
must be set.
Radio Planning Cdma20001XrttPre
2 If Read & Write
(Internal planning) Reg
MinProtocolRevInc
is set to NOT_CFG,
MinProtocolRev
does not need to be
set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg
 If AuthInclude is set
to CFG, Auth must
be set.
Default/Recommen Cdma20001XrttPre
YES(YES) If AuthInclude is set Read & Write
ded Value Reg
to NOT_CFG, Auth
does not need to be
set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If
MaxNumAltSoInclu
de is set to CFG,
MaxNumAltSo must
be set.
Radio Planning Cdma20001XrttPre
1 If Read & Write
(Internal planning) Reg
MaxNumAltSoInclu
de is set to
NOT_CFG,
MaxNumAltSo does
not need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If
PrefMsIdTypeInclud
e is set to CFG,
PrefMsIdType must
be set.
IMSI_ESN(IMSI Default/Recommen Cdma20001XrttPre
If Read & Write
and ESN) ded Value Reg
PrefMsIdTypeInclud
e is set to
NOT_CFG,
PrefMsIdType does
not need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg
 If
ImsiTSupportedIncl
ude is set to CFG,
ImsiTSupported
must be set.
Default/Recommen Cdma20001XrttPre If
NO(No) Read & Write
ded Value Reg ImsiTSupportedIncl
ude is set to
NOT_CFG,
ImsiTSupported
does not need to be
set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc3
must be set.
Default/Recommen Cdma20001XrttPre
40 If Read & Write
ded Value Reg
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc3
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc4
must be set.
Default/Recommen Cdma20001XrttPre
48 If Read & Write
ded Value Reg
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc4
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc5
must be set.
Default/Recommen Cdma20001XrttPre
42 If Read & Write
ded Value Reg
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc5
does not need to be
set.
If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
1 must be set.
Default/Recommen Cdma20001XrttPre
40 If Read & Write
ded Value Reg
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc1
1 does not need to
be set.
 If
FpcFchCfgInclude
is set to CFG,
FpcFchInitSteptRc1
2 must be set.
Default/Recommen Cdma20001XrttPre
40 If Read & Write
ded Value Reg
FpcFchCfgInclude
is set to NOT_CFG,
FpcFchInitSteptRc1
2 does not need to
be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If PilotIncrInclude is
set to CFG,
PilotIncr must be
Radio Planning Cdma20001XrttPre set.
4 Read & Write
(Internal planning) Reg If PilotIncrInclude is
set to NOT_CFG,
PilotIncr does not
need to be set.

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma20001XrttPre

None Read & Write
configure) ded Value Reg

If
GcsnaL2AckTimerI
nclude is set to
CFG,
GcsnaL2AckTimer
must be set.
Default/Recommen Cdma20001XrttPre
30 If Read & Write
ded Value Reg
GcsnaL2AckTimerI
nclude is set to
NOT_CFG,
GcsnaL2AckTimer
does not need to be
set.
NOT_CFG(Not Default/Recommen Cdma20001XrttPre
None Read & Write
configure) ded Value Reg

If
GcsnaSeqContextT
Include is set to
CFG,
GcsnaSeqContextTi
mer must be set.
Radio Planning Cdma20001XrttPre
60 If Read & Write
(Internal planning) Reg
GcsnaSeqContextT
Include is set to
NOT_CFG,
GcsnaSeqContextTi
mer does not need
to be set.

Radio Planning Cdma2000HrpdNC

None None Read Only
(Internal planning) ell

SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
Radio Planning Cdma2000HrpdNC
None composed of upper- Read Only
(Internal planning) ell
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
 SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
Radio Planning Cdma2000HrpdNC number is
None Read Only
(Internal planning) ell composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

Radio Planning Cdma2000HrpdNC

None None Read Only
(Internal planning) ell

Radio Planning Cdma2000HrpdNC

None None Read Only
(Internal planning) ell

PERMIT_HO_ENU Radio Planning Cdma2000HrpdNC

None Read & Write
M(Permit Ho) (Internal planning) ell

PERMIT_RMV_EN
Radio Planning Cdma2000HrpdNC
UM(Permit ANR None Read & Write
(Internal planning) ell
Remove)

BOOLEAN_FALSE( Cdma2000HrpdNC
Engineering Design None Read Only
False) ell
 In the
Cdma2000HrpdNce
ll MO,
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
Cdma2000HrpdNC
None Engineering Design characters: double Read & Write
ell
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).

In the
Cdma2000HrpdNce
ll MO,
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
Cdma2000HrpdNC
None Engineering Design characters:double Read & Write
ell
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
AUTO_MODE(Auto Radio Planning Cdma2000HrpdNC
None Read & Write
Mode) (Internal planning) ell

Radio Planning Cdma2000HrpdPre

None None Read Only
(Internal planning) Reg

Mcc in an
Radio Planning Cdma2000HrpdPre Cdma2000HrpdPre
None Read Only
(Internal planning) Reg Reg MO consists of
digits only.

Mnc in an
Radio Planning Cdma2000HrpdPre Cdma2000HrpdPre
None Read Only
(Internal planning) Reg Reg MO consists of
digits only.

BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre

None Read & Write
False) ded Value Reg

NOT_CFG(Not Default/Recommen Cdma2000HrpdPre

None Read & Write
configure) ded Value Reg
 If
McPreRegParaCfgI
nd is set to CFG,
McPreRegistrationA
llowed must be set.
BOOLEAN_FALSE( Default/Recommen Cdma2000HrpdPre If
Read & Write
False) ded Value Reg McPreRegParaCfgI
nd is set to
NOT_CFG,
McPreRegistrationA
llowed does not
need to be set.

Radio Planning Cdma2000HrpdPre

0 None Read & Write
(Internal planning) Reg

NOT_CFG(Not Default/Recommen Cdma2000HrpdPre

None Read & Write
configure) ded Value Reg

If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
SecondaryPreRegZ
oneId0 must be set.
Radio Planning Cdma2000HrpdPre
None If Read & Write
(Internal planning) Reg
SecondaryPreRegZ
oneId0Ind is set to
NOT_CFG,
SecondaryPreRegZ
oneId0 does not
need to be set.

If
SecondaryPreRegZ
oneId0Ind is set to
CFG,
SecondaryPreRegZ
oneId1Ind must be
NOT_CFG(Not Default/Recommen Cdma2000HrpdPre set.
Read & Write
configure) ded Value Reg If
SecondaryPreRegZ
oneId0Ind is set to
NOT_CFG,
SecondaryPreRegZ
oneId1Ind does not
need to be set.
 If
SecondaryPreRegZ
oneId1Ind is set to
CFG,
SecondaryPreRegZ
oneId1 must be set.
Radio Planning Cdma2000HrpdPre
None If Read & Write
(Internal planning) Reg
SecondaryPreRegZ
oneId1Ind is set to
NOT_CFG,
SecondaryPreRegZ
oneId1 does not
need to be set.

Radio Planning Cdma2000HrpdRef

None None Read Only
(Internal planning) Cell

Mcc in an
Radio Planning Cdma2000HrpdRef Cdma2000HrpdRef
None Read Only
(Internal planning) Cell Cell MO consists of
digits only.

Mnc in an
Radio Planning Cdma2000HrpdRef Cdma2000HrpdRef
None Read Only
(Internal planning) Cell Cell MO consists of
digits only.
 SectorId104 in the
Cdma2000HrpdNC
ell MO must be set
to a hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
number is
Radio Planning Cdma2000HrpdRef
None composed of upper- Read Only
(Internal planning) Cell
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
Radio Planning Cdma2000HrpdRef number is
None Read Only
(Internal planning) Cell composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
 Radio Planning Cdma2000HrpdRef
None None Read & Write
(Internal planning) Cell

Radio Planning
None Cdma2000Nfreq None Read Only
(Internal planning)

Radio Planning
None Cdma2000Nfreq None Read Only
(Internal planning)

Radio Planning
None Cdma2000Nfreq None Read Only
(Internal planning)
0 Engineering Design Cdma2000Nfreq None Read & Write

NOT_CFG(Not
Engineering Design Cdma2000Nfreq None Read & Write
configure)

If
SearchWindowSize
CfgInd is set to
CFG,
SearchWindowSize
must be set.
8 Engineering Design Cdma2000Nfreq If Read & Write
SearchWindowSize
CfgInd is set to
NOT_CFG,
SearchWindowSize
does not need to be
set.
0 Engineering Design Cdma2000Nfreq None Read & Write

Default/Recommen
None Cluster None Read Only
ded Value

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
ClusterCell MO
Default/Recommen
None ClusterCell must be unique. Read Only
ded Value
A maximum of 36
ClusterCell MOs
can be configured
under a Cluster
MO.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
Radio Planning
None ClusterCell ClusterCell MO Read Only
(Internal planning)
must be unique.
Mcc in a ClusterCell
MO must be set to
a number.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
Radio Planning
None ClusterCell ClusterCell MO Read Only
(Internal planning)
must be unique.
Mnc in a ClusterCell
MO must be set to
a number.

The combination of
Mcc, Mnc,
Radio Planning eNodeBId, and
None ClusterCell Read Only
(Internal planning) CellId in each
ClusterCell MO
must be unique.
 The combination of
Mcc, Mnc,
Radio Planning eNodeBId, and
None ClusterCell Read Only
(Internal planning) CellId in each
ClusterCell MO
must be unique.

None N/A ClusterCell None Read Only

A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
Mcc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Radio Planning CspcCellSrsMeasN Cell MO, the
None Read Only
(Internal planning) Cell combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
 A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
Mnc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Radio Planning CspcCellSrsMeasN Cell MO, the
None Read Only
(Internal planning) Cell combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Radio Planning CspcCellSrsMeasN Mnc, eNodeBId,
None Read Only
(Internal planning) Cell and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
 A maximum of 10
CspcCellSrsMeasN
Cell MOs can
include the same
combination of Mcc,
Mnc, eNodeBId,
and CellId.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Radio Planning CspcCellSrsMeasN Mnc, eNodeBId,
None Read Only
(Internal planning) Cell and CellId that
identify the local
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

NCellMcc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
Radio Planning CspcCellSrsMeasN
None identify the local Read Only
(Internal planning) Cell
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
 NCellMnc in a
CspcCellSrsMeasN
Cell MO must be
set to a number.
In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
Radio Planning CspcCellSrsMeasN
None identify the local Read Only
(Internal planning) Cell
cell cannot be the
same as the
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
Radio Planning CspcCellSrsMeasN
None same as the Read Only
(Internal planning) Cell
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.

In a
CspcCellSrsMeasN
Cell MO, the
combination of Mcc,
Mnc, eNodeBId,
and CellId that
identify the local
cell cannot be the
Radio Planning CspcCellSrsMeasN
None same as the Read Only
(Internal planning) Cell
combination of
NCellMcc,
NCellMnc, NCellId,
and
NCellENodeBId
that identify the
neighboring SRS
measurement cell.
 Default/Recommen
None CspcCluster None Read Only
ded Value

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
Default/Recommen MO must be
None CspcClusterCell Read Only
ded Value unique.
A maximum of 36
CspcClusterCell
MOs can be
configured under a
CspcCluster MO.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
Radio Planning
None CspcClusterCell MO must be Read Only
(Internal planning)
unique.
Mcc in a
CspcClusterCell
MO must be set to
a number.

The combination of
Mcc, Mnc,
eNodeBId, and
CellId in each
CspcClusterCell
Radio Planning
None CspcClusterCell MO must be Read Only
(Internal planning)
unique.
Mnc in a
CspcClusterCell
MO must be set to
a number.

The combination of
Mcc, Mnc,
eNodeBId, and
Radio Planning
None CspcClusterCell CellId in each Read Only
(Internal planning)
CspcClusterCell
MO must be
unique.

The combination of
Mcc, Mnc,
eNodeBId, and
Radio Planning
None CspcClusterCell CellId in each Read Only
(Internal planning)
CspcClusterCell
MO must be
unique.
 Mcc in an
EutranExternalCell
Plmn MO consists
of digits only.
In an
Radio Planning EutranExternalCell EutranExternalCell
None Read Only
(Internal planning) Plmn Plmn MO, the
combination of Mnc
and Mcc must be
different from that of
ShareMnc and
ShareMcc.

In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
Radio Planning EutranExternalCell different from that of
None Read Only
(Internal planning) Plmn ShareMnc and
ShareMcc.
Mnc in an
EutranExternalCell
Plmn MO consists
of digits only.

Radio Planning EutranExternalCell

None None Read Only
(Internal planning) Plmn

Radio Planning EutranExternalCell

None None Read Only
(Internal planning) Plmn

In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
Radio Planning EutranExternalCell different from that of
None Read Only
(Internal planning) Plmn ShareMnc and
ShareMcc.
ShareMcc in an
EutranExternalCell
Plmn MO consists
of digits only.
 In an
EutranExternalCell
Plmn MO, the
combination of Mnc
and Mcc must be
Radio Planning EutranExternalCell different from that of
None Read Only
(Internal planning) Plmn ShareMnc and
ShareMcc.
ShareMnc in an
EutranExternalCell
Plmn MO consists
of digits only.

Radio Planning GeranExternalCellP

None None Read Only
(Internal planning) lmn

Radio Planning GeranExternalCellP

None None Read Only
(Internal planning) lmn

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
Radio Planning GeranExternalCellP different from that of
None Read Only
(Internal planning) lmn ShareMnc and
ShareMcc.
Mcc in a
GeranExternalCellP
lmn MO consists of
digits only.

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
Radio Planning GeranExternalCellP different from that of
None Read Only
(Internal planning) lmn ShareMnc and
ShareMcc.
Mnc in a
GeranExternalCellP
lmn MO consists of
digits only.
 In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
Radio Planning GeranExternalCellP different from that of
None Read Only
(Internal planning) lmn ShareMnc and
ShareMcc.
ShareMcc in a
GeranExternalCellP
lmn MO consists of
digits only.

In a
GeranExternalCellP
lmn MO, the
combination of Mnc
and Mcc must be
Radio Planning GeranExternalCellP different from that of
None Read Only
(Internal planning) lmn ShareMnc and
ShareMcc.
ShareMnc in a
GeranExternalCellP
lmn MO consists of
digits only.

Mcc in a
UtranExternalCellPl
mn MO consists of
digits only.
In a
Radio Planning UtranExternalCellPl UtranExternalCellPl
None Read Only
(Internal planning) mn mn MO, the
combination of Mnc
and Mcc must be
different from that of
ShareMnc and
ShareMcc.

In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
Radio Planning UtranExternalCellPl different from that of
None Read Only
(Internal planning) mn ShareMnc and
ShareMcc.
Mnc in a
UtranExternalCellPl
mn MO consists of
digits only.

Radio Planning UtranExternalCellPl

None None Read Only
(Internal planning) mn
 Radio Planning UtranExternalCellPl
None None Read Only
(Internal planning) mn

In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
Radio Planning UtranExternalCellPl different from that of
None Read Only
(Internal planning) mn ShareMnc and
ShareMcc.
ShareMcc in a
UtranExternalCellPl
mn MO consists of
digits only.

In a
UtranExternalCellPl
mn MO, the
combination of Mnc
and Mcc must be
Radio Planning UtranExternalCellPl different from that of
None Read Only
(Internal planning) mn ShareMnc and
ShareMcc.
ShareMnc in a
UtranExternalCellPl
mn MO consists of
digits only.

SectorId104 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 26
digits. A
hexadecimal
Radio Planning Cdma2000HrpdExt number is
None Read Only
(Internal planning) Cell composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.
 SectorId24 in the
Cdma2000HrpdExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
Radio Planning Cdma2000HrpdExt number is
None Read Only
(Internal planning) Cell composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

Radio Planning Cdma2000HrpdExt

None None Read Only
(Internal planning) Cell

Radio Planning Cdma2000HrpdExt

None None Read Only
(Internal planning) Cell

Mcc in an
Radio Planning Cdma2000HrpdExt Cdma2000HrpdExt
None Read & Write
(Internal planning) Cell Cell MO consists of
digits only.

Mnc in an
Radio Planning Cdma2000HrpdExt Cdma2000HrpdExt
None Read & Write
(Internal planning) Cell Cell MO consists of
digits only.
 Radio Planning Cdma2000HrpdExt
None None Read & Write
(Internal planning) Cell

In the
Cdma2000External
Cell MO, CellName
is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
Cdma2000HrpdExt characters:double
None Engineering Design Read & Write
Cell quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).

AUTO_MODE(Auto Radio Planning Cdma2000HrpdExt

None Read & Write
Mode) (Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read Only
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read Only
(Internal planning) Cell
 Radio Planning Cdma20001XrttExt
None None Read Only
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read Only
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read Only
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read Only
(Internal planning) Cell

Mcc in an
Radio Planning Cdma20001XrttExt Cdma20001XrttExt
None Read & Write
(Internal planning) Cell Cell MO consists of
digits only.

Mnc in an
Radio Planning Cdma20001XrttExt Cdma20001XrttExt
None Read & Write
(Internal planning) Cell Cell MO consists of
digits only.
 MscId in the
Cdma20001XrttExt
Cell MO must be
set to a
hexadecimal
number starting
with 0x and with a
total length not
greater than 6
digits. A
hexadecimal
Radio Planning Cdma20001XrttExt number is
None Read & Write
(Internal planning) Cell composed of upper-
case letters (A to F)
and digits (0 to 9).
The hexadecimal
digit following 0x
can be 0 only if the
parameter is set to
0x0. That is, the
parameter value
like 0x00AB is
inappropriate but
0x0 is acceptable.

Radio Planning Cdma20001XrttExt

None None Read & Write
(Internal planning) Cell

Radio Planning Cdma20001XrttExt

None None Read & Write
(Internal planning) Cell

AUTO_MODE(Auto Radio Planning Cdma20001XrttExt

None Read & Write
Mode) (Internal planning) Cell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell
 Radio Planning Cdma20001XrttNC
None None Read Only
(Internal planning) ell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell

Radio Planning Cdma20001XrttNC

None None Read Only
(Internal planning) ell

PERMIT_HO_ENU Radio Planning Cdma20001XrttNC

None Read & Write
M(Permit Ho) (Internal planning) ell

PERMIT_RMV_EN
Radio Planning Cdma20001XrttNC
UM(Permit ANR None Read & Write
(Internal planning) ell
Remove)

BOOLEAN_FALSE( Cdma20001XrttNC
Engineering Design None Read Only
False) ell
 In the
Cdma20001XrttNC
ell MO,
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
Cdma20001XrttNC
None Engineering Design characters: double Read & Write
ell
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).

In the
Cdma20001XRTTN
cell MO,
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be
null characters or
contain any of the
following
Cdma20001XrttNC
None Engineering Design characters:double Read & Write
ell
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+), two or
more blanks, and
two or more
percentage signs
(%).
AUTO_MODE(Auto Radio Planning Cdma20001XrttNC
None Read & Write
Mode) (Internal planning) ell

Radio Planning Cdma2000BandCla

None None Read Only
(Internal planning) ss

Radio Planning Cdma2000BandCla

None None Read Only
(Internal planning) ss

NOT_CFG(Not Radio Planning Cdma2000BandCla

None Read & Write
configure) (Internal planning) ss

If
Cdma20001XrttCell
ReselInd is set to
CFG,
Cdma20001XrttCell
ReselPri must be
Radio Planning Cdma2000BandCla set.
2 Read & Write
(Internal planning) ss If
Cdma20001XrttCell
ReselInd is set to
NOT_CFG,
Cdma20001XrttCell
ReselPri does not
need to be set.
 Radio Planning Cdma2000BandCla
-34 None Read & Write
(Internal planning) ss

Radio Planning Cdma2000BandCla

-34 None Read & Write
(Internal planning) ss

NOT_CFG(Not Radio Planning Cdma2000BandCla

None Read & Write
configure) (Internal planning) ss

If
Cdma2000HrpdCell
ReselInd is set to
CFG,
Cdma2000HrpdCell
ReselPri must be
Radio Planning Cdma2000BandCla set.
2 Read & Write
(Internal planning) ss If
Cdma2000HrpdCell
ReselInd is set to
NOT_CFG,
Cdma2000HrpdCell
ReselPri does not
need to be set.

Radio Planning Cdma2000BandCla

-26 None Read & Write
(Internal planning) ss

Radio Planning Cdma2000BandCla

-26 None Read & Write
(Internal planning) ss
 Mcc in a
Radio Planning GeranExternalCell
None GeranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Mnc in a
Radio Planning GeranExternalCell
None GeranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Radio Planning
None GeranExternalCell None Read Only
(Internal planning)

Radio Planning
None GeranExternalCell None Read Only
(Internal planning)

NOT_CFG(Not Default/Recommen
GeranExternalCell None Read & Write
configure) ded Value

If RacCfgInd is set
to CFG, this
parameter must be
Radio Planning set.
None GeranExternalCell Read & Write
(Internal planning) If RacCfgInd is set
to NOT_CFG, this
parameter does not
need to be set.

Radio Planning
None GeranExternalCell None Read & Write
(Internal planning)

Radio Planning
None GeranExternalCell None Read & Write
(Internal planning)

Radio Planning
None GeranExternalCell None Read & Write
(Internal planning)
 Radio Planning
None GeranExternalCell None Read & Write
(Internal planning)

DTM_NOT_AVAILA Radio Planning

GeranExternalCell None Read & Write
BLE (Internal planning)

In the
GeranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design GeranExternalCell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

BOOLEAN_FALSE( Radio Planning

GeranExternalCell None Read & Write
False) (Internal planning)
BOOLEAN_TRUE( Radio Planning
GeranExternalCell None Read & Write
True) (Internal planning)

Default/Recommen
NO GeranExternalCell None Read & Write
ded Value

AUTO_MODE(Auto Radio Planning

GeranExternalCell None Read & Write
Mode) (Internal planning)
 Radio Planning
None GeranNcell None Read Only
(Internal planning)

Mcc in a
Radio Planning GeranNcell MO
None GeranNcell Read Only
(Internal planning) consists of digits
only.

Mnc in a
Radio Planning GeranNcell MO
None GeranNcell Read Only
(Internal planning) consists of digits
only.

Radio Planning
None GeranNcell None Read Only
(Internal planning)

Radio Planning
None GeranNcell None Read Only
(Internal planning)

PERMIT_RMV_EN
UM(Permit ANR Engineering Design GeranNcell None Read & Write
Remove)

PERMIT_HO_ENU
Engineering Design GeranNcell None Read & Write
M(Permit Ho)

0 Engineering Design GeranNcell None Read & Write

BOOLEAN_FALSE( Default/Recommen
GeranNcell None Read Only
False) ded Value

In the GeranNcell
MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design GeranNcell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the GeranNcell
MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design GeranNcell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 Default/Recommen
NO(NO) GeranNcell None Read & Write
ded Value

Default/Recommen
0 GeranNcell None Read Only
ded Value

AUTO_MODE(Auto Radio Planning

GeranNcell None Read & Write
Mode) (Internal planning)

None N/A GeranNcell None Read Only

None N/A GeranNcell None Read Only

None N/A GeranNcell None Read Only

 Radio Planning
None GeranNfreqGroup None Read Only
(Internal planning)

Radio Planning
None GeranNfreqGroup None Read Only
(Internal planning)

Radio Planning
None GeranNfreqGroup None Read & Write
(Internal planning)

Radio Planning
None GeranNfreqGroup None Read & Write
(Internal planning)

Radio Planning
None GeranNfreqGroup None Read & Write
(Internal planning)

NOT_CFG(Not
Engineering Design GeranNfreqGroup None Read & Write
configure)

If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
If
1 Engineering Design GeranNfreqGroup Read & Write
CellReselPriorityCfg
Ind is set to
NOT_CFG,
CellReselPriority
does not need to be
set.

NOT_CFG(Not Default/Recommen
GeranNfreqGroup None Read & Write
configure) ded Value
 If
PmaxGeranCfgInd
is set to CFG,
PmaxGeran must
be set.
None Engineering Design GeranNfreqGroup Read & Write
If
PmaxGeranCfgInd
is set to NOT_CFG,
PmaxGeran does
not need to be set.

Default/Recommen
0 GeranNfreqGroup None Read & Write
ded Value

Default/Recommen
7 GeranNfreqGroup None Read & Write
ded Value

Default/Recommen
7 GeranNfreqGroup None Read & Write
ded Value
 Default/Recommen
0 GeranNfreqGroup None Read & Write
ded Value

Default/Recommen
255 GeranNfreqGroup None Read & Write
ded Value

0 Engineering Design GeranNfreqGroup None Read & Write

NON_CONTINUOU
Default/Recommen
S(NON_CONTINU GeranNfreqGroup None Read & Write
ded Value
OUS)
BOOLEAN_TRUE( Default/Recommen
GeranNfreqGroup None Read & Write
True) ded Value

ALLOWED(ALLOW Radio Planning

GeranNfreqGroup None Read & Write
ED) (Internal planning)
 Radio Planning
0 GeranNfreqGroup None Read & Write
(Internal planning)

Radio Planning GeranNfreqGroupA

None None Read Only
(Internal planning) rfcn

Radio Planning GeranNfreqGroupA

None None Read Only
(Internal planning) rfcn

Radio Planning GeranNfreqGroupA

None None Read Only
(Internal planning) rfcn

None Engineering Design IntraFreqBlkCell None Read Only

 The sum of the
value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
None Engineering Design IntraFreqBlkCell Read Only
the value of
PhyCellId must be
smaller than 504 in
the IntraFreqBlkCell
MO.

None Engineering Design IntraFreqBlkCell None Read & Write

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
None Engineering Design IntraFreqBlkCell Read & Write
the value of
PhyCellId must be
smaller than 504 in
the IntraFreqBlkCell
MO.

Radio Planning EutranIntraFreqNC

None None Read Only
(Internal planning) ell

Mcc in an
Radio Planning EutranIntraFreqNC EutranIntraFreqNC
None Read Only
(Internal planning) ell ell MO consists of
digits only.

Mnc in an
Radio Planning EutranIntraFreqNC EutranIntraFreqNC
None Read Only
(Internal planning) ell ell MO consists of
digits only.

Radio Planning EutranIntraFreqNC

None None Read Only
(Internal planning) ell

Radio Planning EutranIntraFreqNC

None None Read Only
(Internal planning) ell
 Default/Recommen EutranIntraFreqNC
dB0(0dB) None Read & Write
ded Value ell
 Default/Recommen EutranIntraFreqNC
dB0(0dB) None Read & Write
ded Value ell

PERMIT_HO_ENU Radio Planning EutranIntraFreqNC

None Read & Write
M(Permit Ho) (Internal planning) ell

PERMIT_RMV_EN
Radio Planning EutranIntraFreqNC
UM(Permit ANR None Read & Write
(Internal planning) ell
Remove)

BOOLEAN_FALSE( Default/Recommen EutranIntraFreqNC

None Read Only
False) ded Value ell
 In the
EutranIntraFreqNC
ell MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
EutranIntraFreqNC
None Engineering Design quotation marks ("), Read & Write
ell
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the
EutranIntraFreqNC
ell MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters: double
EutranIntraFreqNC
None Engineering Design quotation marks ("), Read & Write
ell
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
LOW_PRIORITY(L Default/Recommen EutranIntraFreqNC
None Read & Write
ow Priority) ded Value ell
 Default/Recommen EutranIntraFreqNC
0 None Read & Write
ded Value ell

Radio Planning EutranIntraFreqNC

None None Read & Write
(Internal planning) ell

AUTO_MODE(Auto Radio Planning EutranIntraFreqNC

None Read & Write
Mode) (Internal planning) ell
 Radio Planning EutranIntraFreqNC
None None Read Only
(Internal planning) ell

Radio Planning EutranIntraFreqNC

None None Read Only
(Internal planning) ell
 coordination (eICIC)
takes effect only
when homing
relationships
between macro and
micro cells are
configured. After
dynamic eICIC is
enabled and
homing
relationships
between macro and
micro cells are
modified, the
almost-blank
subframe (ABS) of
the new homing
macro cell may
Radio Planning EutranIntraFreqNC differ from that of
OFF(Off) Read & Write
(Internal planning) ell the original homing
macro cell.
However, to
decrease signaling
overheads in the
RRC layer, the
micro cells whose
homing
relationships are
modified do not
initiate CRE and
measurement
subset
reconfiguration for
UEs that have
already accessed
the cells. As a
result, these UEs
may suffer stronger
Radio Planning
None EutranInterNFreq None Read Only
(Internal planning)

DlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency.
In an
Radio Planning
None EutranInterNFreq EutranInterNFreq Read Only
(Internal planning)
MO, if DlEarfcn is
specific to band 29,
UlEarfcnCfgInd
must be set to
NOT_CFG.
 In an
EutranInterNFreq
MO, if DlEarfcn is
NOT_CFG(Not Default/Recommen
EutranInterNFreq specific to band 29, Read & Write
configure) ded Value
UlEarfcnCfgInd
must be set to
NOT_CFG.

UlEarfcn in an
EutranInterNFreq
MO must be a valid
frequency.
If UlEarfcnCfgInd is
Radio Planning set to CFG,
None EutranInterNFreq Read & Write
(Internal planning) UlEarfcn must be
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

NOT_CFG(Not Default/Recommen
EutranInterNFreq None Read & Write
configure) ded Value

If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
Radio Planning If
1 EutranInterNFreq Read & Write
(Internal planning) CellReselPriorityCfg
Ind is set to
NOT_CFG,
CellReselPriority
does not need to be
set.
 Default/Recommen
1 EutranInterNFreq None Read & Write
ded Value

NOT_CFG(Not Default/Recommen
EutranInterNFreq None Read & Write
configure) ded Value

If the
SpeedDependSPCf
gInd parameter is
set to CFG, the
TReselEutranSfMe
dium parameter
must be set.
None Engineering Design EutranInterNFreq If the Read & Write
SpeedDependSPCf
gInd parameter is
set to NOT_CFG,
the
TReselEutranSfHig
h parameter does
not need to be set.
 If the
SpeedDependSPCf
gInd parameter is
set to CFG, the
TReselEutranSfHig
h parameter must
be set.
None Engineering Design EutranInterNFreq If the Read & Write
SpeedDependSPCf
gInd parameter is
set to NOT_CFG,
the
TReselEutranSfHig
h parameter does
not need to be set.

None Engineering Design EutranInterNFreq None Read & Write

 Default/Recommen
dB0(0dB) EutranInterNFreq None Read & Write
ded Value

Default/Recommen
11 EutranInterNFreq None Read & Write
ded Value
 Default/Recommen
11 EutranInterNFreq None Read & Write
ded Value

A larger value of
this parameter
leads to a lower
probability of a cell
meeting criteria S
and becoming a
suitable cell for cell
selection. A smaller
Default/Recommen value of this
-64 EutranInterNFreq Read & Write
ded Value parameter leads to
a higher probability.
Set this parameter
properly so that the
selected cell can
provide signals that
meet the quality
requirement of
basic services.

NOT_CFG(Not Default/Recommen
EutranInterNFreq None Read & Write
configure) ded Value

If PmaxCfgInd is
set to CFG, Pmax
must be set.
Default/Recommen
23 EutranInterNFreq If PmaxCfgInd is Read & Write
ded Value
set to NOT_CFG,
Pmax does not
need to be set.
 Default/Recommen
BitString01(01) EutranInterNFreq None Read & Write
ded Value

BOOLEAN_FALSE( Default/Recommen
EutranInterNFreq None Read & Write
False) ded Value

If the neighboring
E-UTRAN
frequency and the
serving frequency
are in the same
frequency band, the
value EventA3 is
recommended.
Engineering Design EutranInterNFreq None Read & Write
If the neighboring
E-UTRAN
frequency and the
serving frequency
are in different
frequency bands,
the value EventA4
is recommended.

Radio Planning
0 EutranInterNFreq None Read & Write
(Internal planning)
 Radio Planning
0 EutranInterNFreq None Read & Write
(Internal planning)

NOT_CFG(Not
Engineering Design EutranInterNFreq None Read & Write
configure)

If QqualMinCfgInd
is set to CFG, this
parameter must be
Radio Planning set.
-18 EutranInterNFreq Read & Write
(Internal planning) If QqualMinCfgInd
is set to NOT_CFG,
this parameter does
not need to be set.

Radio Planning
0 EutranInterNFreq None Read & Write
(Internal planning)
ALLOWED(ALLOW Default/Recommen
EutranInterNFreq None Read & Write
ED) ded Value

Radio Planning
DISABLE(Disable) EutranInterNFreq None Read & Write
(Internal planning)
You are advised to
set this parameter
based on the
frequency
coverage,
frequency
bandwidth, and UE
capability. For
The sum of
example, if the
IdleMlbUERelease
network has two
Ratio in all
frequencies (F1 and Radio Planning
EutranInterNFreq EutranInterNFreq Read & Write
F2) with the same (Internal planning)
MOs of the same
coverage and in the
cell cannot exceed
same bandwidth,
100.
and all UEs in the
network support
both frequencies, it
is recommended
that the proportions
for load balancing
of F1 and F2 are
both set to 50%.

Radio Planning
7 EutranInterNFreq None Read & Write
(Internal planning)
 Default/Recommen
dB0(0dB) EutranInterNFreq None Read & Write
ded Value

Radio Planning
None EutranInterNFreq None Read & Write
(Internal planning)

Radio Planning
None EutranInterNFreq None Read & Write
(Internal planning)
 Default/Recommen
0 EutranInterNFreq None Read & Write
ded Value

Default/Recommen
None EutranInterNFreq None Read & Write
ded Value

BOOLEAN_TRUE( Default/Recommen
EutranInterNFreq None Read & Write
True) ded Value
 Radio Planning
None EutranInterNFreq None Read & Write
(Internal planning)

ALLOWED(ALLOW Radio Planning

EutranInterNFreq None Read & Write
ED) (Internal planning)
 Radio Planning
1 EutranInterNFreq None Read & Write
(Internal planning)

Radio Planning
0 EutranInterNFreq None Read & Write
(Internal planning)
 Default/Recommen
NOT_ALLOWED EutranInterNFreq None Read & Write
ded Value

Default/Recommen
None. EutranInterNFreq None Read & Write
ded Value
NOT_ALLOWED(N Radio Planning
EutranInterNFreq None Read & Write
OT ALLOWED) (Internal planning)

Radio Planning
7 EutranInterNFreq None Read & Write
(Internal planning)

AUTO_MODE(Auto Radio Planning

EutranInterNFreq None Read & Write
Mode) (Internal planning)

None Engineering Design InterFreqBlkCell None Read Only

 DlEarfcn in an
InterFreqBlkCell
None Engineering Design InterFreqBlkCell Read Only
MO must be a valid
frequency.

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
None Engineering Design InterFreqBlkCell Read Only
the value of
PhyCellId must be
smaller than 504 in
the InterFreqBlkCell
MO.

None Engineering Design InterFreqBlkCell None Read & Write

The sum of the

value of
PhyCellIdRange(n1
is 1, n4 is 4, n8 is
8,and so on) and
None Engineering Design InterFreqBlkCell Read & Write
the value of
PhyCellId must be
smaller than 504 in
the InterFreqBlkCell
MO.

Radio Planning EutranInterFreqNC

None None Read Only
(Internal planning) ell

Mcc in an
Radio Planning EutranInterFreqNC EutranInterFreqNC
None Read Only
(Internal planning) ell ell MO consists of
digits only.

Mnc in an
Radio Planning EutranInterFreqNC EutranInterFreqNC
None Read Only
(Internal planning) ell ell MO consists of
digits only.

Radio Planning EutranInterFreqNC

None None Read Only
(Internal planning) ell
 Radio Planning EutranInterFreqNC
None None Read Only
(Internal planning) ell

Default/Recommen EutranInterFreqNC
dB0(0dB) None Read & Write
ded Value ell
 Default/Recommen EutranInterFreqNC
dB0(0dB) None Read & Write
ded Value ell

PERMIT_HO_ENU Radio Planning EutranInterFreqNC

None Read & Write
M(Permit Ho) (Internal planning) ell

PERMIT_RMV_EN
Radio Planning EutranInterFreqNC
UM(Permit ANR None Read & Write
(Internal planning) ell
Remove)
 Radio Planning EutranInterFreqNC
0 None Read & Write
(Internal planning) ell

BOOLEAN_FALSE( Default/Recommen EutranInterFreqNC

None Read Only
False) ded Value ell

In the
EutranInterFreqNC
ell MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
EutranInterFreqNC
None Engineering Design quotation marks ("), Read & Write
ell
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
 In the
EutranInterFreqNC
ell MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
EutranInterFreqNC
None Engineering Design quotation marks ("), Read & Write
ell
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
LOW_PRIORITY(L Default/Recommen EutranInterFreqNC
None Read & Write
ow Priority) ded Value ell

Radio Planning EutranInterFreqNC

NO(NO) None Read & Write
(Internal planning) ell

Radio Planning EutranInterFreqNC

NULL(NULL) None Read & Write
(Internal planning) ell

Radio Planning EutranInterFreqNC

None None Read & Write
(Internal planning) ell
AUTO_MODE(Auto Radio Planning EutranInterFreqNC
None Read & Write
Mode) (Internal planning) ell

Radio Planning EutranInterFreqNC

None None Read Only
(Internal planning) ell

Radio Planning EutranInterFreqNC

None None Read Only
(Internal planning) ell
 Mcc in an
Radio Planning EutranExternalCell
None EutranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Mnc in an
Radio Planning EutranExternalCell
None EutranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Radio Planning
None EutranExternalCell None Read Only
(Internal planning)

Radio Planning
None EutranExternalCell None Read Only
(Internal planning)
 DlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
In an
Radio Planning
None EutranExternalCell EutranExternalCell Read & Write
(Internal planning)
MO, if DlEarfcn is
specific to band 29,
UlEarfcnCfgInd
must be set to
NOT_CFG.

In an
EutranExternalCell
MO, if DlEarfcn is
NOT_CFG(Not Default/Recommen
EutranExternalCell specific to band 29, Read & Write
configure) ded Value
UlEarfcnCfgInd
must be set to
NOT_CFG.

UlEarfcn in an
EutranExternalCell
MO must be a valid
frequency.
If UlEarfcnCfgInd is
Radio Planning set to CFG,
None EutranExternalCell Read & Write
(Internal planning) UlEarfcn must be
set.
If UlEarfcnCfgInd is
set to NOT_CFG,
UlEarfcn does not
need to be set.

Radio Planning
None EutranExternalCell None Read & Write
(Internal planning)
 Radio Planning
None EutranExternalCell None Read & Write
(Internal planning)

In the
EutranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design EutranExternalCell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

Radio Planning
None EutranExternalCell None Read & Write
(Internal planning)

Radio Planning
None EutranExternalCell None Read Only
(Internal planning)
 Default/Recommen
NO EutranExternalCell None Read & Write
ded Value

AUTO_MODE(Auto Radio Planning

EutranExternalCell None Read & Write
Mode) (Internal planning)

Radio Planning Cdma2000BcSCell

None None Read Only
(Internal planning) Op

Radio Planning Cdma2000BcSCell

None None Read Only
(Internal planning) Op

Radio Planning Cdma2000BcSCell

None None Read Only
(Internal planning) Op
NOT_CFG(Not Radio Planning Cdma2000BcSCell
None Read & Write
configure) (Internal planning) Op

This parameter is
optional, depending
Radio Planning Cdma2000BcSCell
0 on the setting of Read & Write
(Internal planning) Op
Cdma1XrttCellRese
lPriInd.

NOT_CFG(Not Radio Planning Cdma2000BcSCell

None Read & Write
configure) (Internal planning) Op

This parameter is
optional, depending
Radio Planning Cdma2000BcSCell
0 on the setting of Read & Write
(Internal planning) Op
HrpdCellReselDedi
PriCfgInd.

Radio Planning EutranNFreqRanSh

None None Read Only
(Internal planning) are

Radio Planning EutranNFreqRanSh

None None Read Only
(Internal planning) are

Radio Planning EutranNFreqRanSh

None None Read Only
(Internal planning) are
 Radio Planning EutranNFreqRanSh
None None Read Only
(Internal planning) are

NOT_CFG(Not Radio Planning EutranNFreqRanSh

None Read & Write
configure) (Internal planning) are

This parameter is
optional, depending
Radio Planning EutranNFreqRanSh
0 on the setting of Read & Write
(Internal planning) are
CellReselPriorityCfg
Ind.

Radio Planning EutranNFreqSCellO

None None Read Only
(Internal planning) p

Radio Planning EutranNFreqSCellO

None None Read Only
(Internal planning) p

Radio Planning EutranNFreqSCellO

None None Read Only
(Internal planning) p

NOT_CFG(Not Default/Recommen EutranNFreqSCellO

None Read & Write
configure) ded Value p
 This parameter is
optional, depending
Radio Planning EutranNFreqSCellO
0 on the setting of Read & Write
(Internal planning) p
CellReselDediPriCf
gInd.

Radio Planning GeranNFGroupSCe

None None Read Only
(Internal planning) llOp

Radio Planning GeranNFGroupSCe

None None Read Only
(Internal planning) llOp

Radio Planning GeranNFGroupSCe

None None Read Only
(Internal planning) llOp

NOT_CFG(Not Radio Planning GeranNFGroupSCe

None Read & Write
configure) (Internal planning) llOp

This parameter is
optional, depending
Radio Planning GeranNFGroupSCe
0 on the setting of Read & Write
(Internal planning) llOp
CellReselDediPriCf
gInd.

Radio Planning
None GeranRanShare None Read Only
(Internal planning)

Radio Planning
None GeranRanShare None Read Only
(Internal planning)
 Radio Planning
None GeranRanShare None Read Only
(Internal planning)

Radio Planning
None GeranRanShare None Read Only
(Internal planning)

NOT_CFG(Not Radio Planning

GeranRanShare None Read & Write
configure) (Internal planning)

This parameter is
optional, depending
Radio Planning
0 GeranRanShare on the setting of Read & Write
(Internal planning)
CellReselPriorityCfg
Ind.

Radio Planning
None UtranNCell None Read Only
(Internal planning)

Radio Planning Mcc in a UtranNCell

None (Negotiation with UtranNCell MO consists of Read Only
the peer) digits only.
 Mnc in a UtranNCell
Radio Planning
None UtranNCell MO consists of Read Only
(Internal planning)
digits only.

Radio Planning
None UtranNCell None Read Only
(Internal planning)

Radio Planning
None UtranNCell None Read Only
(Internal planning)

PERMIT_HO_ENU Radio Planning

UtranNCell None Read & Write
M(Permit Ho) (Internal planning)

PERMIT_RMV_EN
Radio Planning
UM(Permit ANR UtranNCell None Read & Write
(Internal planning)
Remove)

BOOLEAN_FALSE( Default/Recommen
UtranNCell None Read Only
False) ded Value
 Radio Planning
0 UtranNCell None Read & Write
(Internal planning)

LOW_PRIORITY(L Default/Recommen
UtranNCell None Read & Write
ow Priority) ded Value

Default/Recommen
NO(NO) UtranNCell None Read & Write
ded Value
 Default/Recommen
0 UtranNCell None Read Only
ded Value
 In the UtranNCell
MO, the value of
LocalCellName is a
string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design UtranNCell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

In the UtranNCell
MO, the value of
NeighbourCellNam
e is a string of a
maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design UtranNCell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).
AUTO_MODE(Auto Radio Planning
UtranNCell None Read & Write
Mode) (Internal planning)

None N/A UtranNCell None Read Only

None N/A UtranNCell None Read Only

None N/A UtranNCell None Read Only

None N/A UtranNCell None Read Only

None N/A UtranNCell None Read Only

None N/A UtranNCell None Read Only

Radio Planning
None UtranNFreqSCellOp None Read Only
(Internal planning)

Radio Planning
None UtranNFreqSCellOp None Read Only
(Internal planning)

Radio Planning
None UtranNFreqSCellOp None Read Only
(Internal planning)
NOT_CFG(Not Default/Recommen
UtranNFreqSCellOp None Read & Write
configure) ded Value

This parameter is
optional, depending
Radio Planning
0 UtranNFreqSCellOp on the setting of Read & Write
(Internal planning)
CellReselDediPriCf
gInd.

Radio Planning
None UtranRanShare None Read Only
(Internal planning)

Radio Planning
None UtranRanShare None Read Only
(Internal planning)
 Radio Planning
None UtranRanShare None Read Only
(Internal planning)

Radio Planning
None UtranRanShare None Read Only
(Internal planning)

NOT_CFG(Not Radio Planning

UtranRanShare None Read & Write
configure) (Internal planning)

This parameter is
optional, depending
Radio Planning
0 UtranRanShare on the setting of Read & Write
(Internal planning)
CellReselPriorityCfg
Ind.

Radio Planning
None UtranNFreq None Read Only
(Internal planning)
 Radio Planning
None UtranNFreq None Read Only
(Internal planning)

HSUPA Engineering Design UtranNFreq None Read & Write

Radio Planning
UTRAN_FDD UtranNFreq None Read & Write
(Internal planning)
NOT_CFG(Not Default/Recommen
UtranNFreq None Read & Write
configure) ded Value
 1. If
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set. If
UtranUlArfcnCfgInd
Radio Planning is set to NOT_CFG,
None UtranNFreq Read & Write
(Internal planning) UtranUlArfcn does
not need to be set.
2. The DL UARFCN
and UL UARFCN
must be in the
same frequency
band.

NOT_CFG(Not Default/Recommen
UtranNFreq None Read & Write
configure) ded Value

If
CellReselPriorityCfg
Ind is set to CFG,
CellReselPriority
must be set.
Radio Planning If
1 UtranNFreq Read & Write
(Internal planning) CellReselPriorityCfg
Ind is set to
NOT_CFG,
CellReselPriority
does not need to be
set.

Default/Recommen
24 UtranNFreq None Read & Write
ded Value
 Default/Recommen
0 UtranNFreq None Read & Write
ded Value

Qqualmin must be
set if
Default/Recommen
-22 UtranNFreq UtranFddTddType Read & Write
ded Value
is set to
UTRAN_FDD.
 Default/Recommen
-58 UtranNFreq None Read & Write
ded Value

Default/Recommen
6 UtranNFreq None Read & Write
ded Value

Default/Recommen
6 UtranNFreq None Read & Write
ded Value

ThreshXHighQ
must be set if
Default/Recommen
0 UtranNFreq UtranFddTddType Read & Write
ded Value
is set to
UTRAN_FDD.
 ThreshXLowQ must
be set if
Default/Recommen
0 UtranNFreq UtranFddTddType Read & Write
ded Value
is set to
UTRAN_FDD.

Priority_2(Priority 2) Engineering Design UtranNFreq None Read & Write

Priority_2(Priority 2) Engineering Design UtranNFreq None Read & Write

Radio Planning
0 UtranNFreq None Read & Write
(Internal planning)
 Radio Planning
Priority_2(Priority 2) UtranNFreq None Read & Write
(Internal planning)

NON_CONTINUOU
Default/Recommen
S(NON_CONTINU UtranNFreq None Read & Write
ded Value
OUS)

Radio Planning
0 UtranNFreq None Read & Write
(Internal planning)
 Default/Recommen
None UtranNFreq None Read & Write
ded Value

BOOLEAN_TRUE( Default/Recommen
UtranNFreq None Read & Write
True) ded Value
ALLOWED(ALLOW Radio Planning
UtranNFreq None Read & Write
ED) (Internal planning)

Priority_2(Priority 2) Engineering Design UtranNFreq None Read & Write

BOOLEAN_FALSE( Default/Recommen
UtranNFreq None Read & Write
False) ded Value

Radio Planning
0 UtranNFreq None Read & Write
(Internal planning)

Mcc in a
Radio Planning UtranExternalCell
None UtranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Mnc in a
Radio Planning UtranExternalCell
None UtranExternalCell Read Only
(Internal planning) MO consists of
digits only.

Radio Planning
None UtranExternalCell None Read Only
(Internal planning)
 Radio Planning
None UtranExternalCell None Read Only
(Internal planning)

Radio Planning
None UtranExternalCell None Read & Write
(Internal planning)
NOT_CFG(Not Default/Recommen
UtranExternalCell None Read & Write
configure) ded Value
 When
UtranUlArfcnCfgInd
is set to CFG,
UtranUlArfcn must
be set.
Radio Planning
None UtranExternalCell If Read & Write
(Internal planning)
UtranUlArfcnCfgInd
is set to NOT_CFG,
UtranUlArfcn does
not need to be
configured.

In a
UtranExternalCell
MO, PScrambCode
cannot exceed 127
if UtranFddTddType
is set to
UTRAN_TDD.
UTRAN_FDD Engineering Design UtranExternalCell In a Read & Write
UtranExternalCell
MO, if
UtranFddTddType
is set to
UTRAN_TDD,
MultiBand is
forbidden.

NOT_CFG(Not Default/Recommen
UtranExternalCell None Read & Write
configure) ded Value
 If RacCfgInd is set
to CFG, this
parameter must be
Radio Planning set.
None UtranExternalCell Read & Write
(Internal planning) If RacCfgInd is set
to NOT_CFG, this
parameter does not
need to be set.

In a
UtranExternalCell
MO, PScrambCode
Radio Planning
None UtranExternalCell cannot exceed 127 Read & Write
(Internal planning)
if UtranFddTddType
is set to
UTRAN_TDD.

Radio Planning
None UtranExternalCell None Read & Write
(Internal planning)
 In the
UtranExternalCell
MO, the value of
CellName is a string
of a maximum of 99
characters. The
string cannot be all
null characters or
contain any of the
following
characters:double
quotation marks ("),
None Engineering Design UtranExternalCell Read & Write
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three
consecutive plus
signs (+++), two or
more consecutive
blanks, and two or
more consecutive
percentage signs
(%).

BOOLEAN_FALSE( Default/Recommen
UtranExternalCell None Read & Write
False) ded Value

In a
UtranExternalCell
MO, if
Radio Planning UtranFddTddType
None UtranExternalCell Read & Write
(Internal planning) is set to
UTRAN_TDD,
MultiBand is
forbidden.

Radio Planning
None UtranExternalCell None Read Only
(Internal planning)
 Default/Recommen
NO UtranExternalCell None Read & Write
ded Value

AUTO_MODE(Auto Radio Planning

UtranExternalCell None Read & Write
Mode) (Internal planning)

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read & Write

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read Only

None N/A BbpCollaborateGrp None Read Only

Default/Recommen
60 BbpCollaborateGrp None Read & Write
ded Value
 In a
BbpCollaborateGrp
MO, if
BbpCollaborateTrig
gerThd is set to a
non-zero value,
BbpCollaborateCle
arThd cannot be set
to 0.
In a
BbpCollaborateGrp
MO, if
BbpCollaborateCle
arThd is set to a
non-zero value,
BbpCollaborateTrig
Radio Planning
None BbpCollaborateGrp gerThd cannot be Read & Write
(Internal planning)
set to 0.
In a
BbpCollaborateGrp
MO, if both
BbpCollaborateTrig
gerThd and
BbpCollaborateCle
arThd are set to
non-zero values,
the value of
BbpCollaborateTrig
gerThd must be
greater than the
value of
BbpCollaborateCle
arThd.
 In a
BbpCollaborateGrp
MO, if
BbpCollaborateTrig
gerThd is set to a
non-zero value,
BbpCollaborateCle
arThd cannot be set
to 0.
In a
BbpCollaborateGrp
MO, if
BbpCollaborateCle
arThd is set to a
non-zero value,
BbpCollaborateTrig
Radio Planning
None BbpCollaborateGrp gerThd cannot be Read & Write
(Internal planning)
set to 0.
In a
BbpCollaborateGrp
MO, if both
BbpCollaborateTrig
gerThd and
BbpCollaborateCle
arThd are set to
non-zero values,
the value of
BbpCollaborateTrig
gerThd must be
greater than the
value of
BbpCollaborateCle
arThd.

None Engineering Design BbpCollaborateGrp None Read & Write

 Equipment
1080 eNodeBAlmCfg None Read & Write
Planning

Radio Planning
S1:Off,X2:Off eNodeBAlmCfg None Read & Write
(Internal planning)
 ENodeBFrameOffs
None Engineering Design None Read & Write
et

ENodeBFrameOffs
None Engineering Design None Read & Write
et

Default/Recommen
None EuCoSchCfg None Read & Write
ded Value
 Transport
None Planning(Internal EuCoSchCfg None Read & Write
planning)

Equipment EuCoSchDLCoMP
6 None Read & Write
Planning Cfg

Equipment EuCoSchDLCoMP
OFF(Off) None Read & Write
Planning Cfg
 Equipment EuCoSchDLCoMP
1 None Read & Write
Planning Cfg

FIX_MODE(Fixed Equipment EuCoSchDLCoMP

None Read & Write
Mode) Planning Cfg

NORMAL(Normal
N/A FddResMode None Read & Write
Mode)
NORMAL(NORMAL Default/Recommen
FddResMode None Read & Write
) ded Value

Set this parameter

to ON(On) in the
following scenario:
Only some cells Default/Recommen
FddResMode None Read & Write
served by the ded Value
eNodeB are bound
to the baseband
equipment.

Default/Recommen
None LIOptAtomRule None Read Only
ded Value

Default/Recommen
None LIOptAtomRule None Read Only
ded Value
 Default/Recommen
None LIOptAtomRule None Read Only
ded Value

Default/Recommen
None LIOptAtomRule None Read & Write
ded Value

Default/Recommen
None LIOptAtomRule None Read Only
ded Value

Default/Recommen
None LIOptFeature None Read Only
ded Value

Default/Recommen
None LIOptFeature None Read Only
ded Value
 Default/Recommen
None LIOptFunction None Read Only
ded Value

In the
LIOPTFUNCTION
MO,
IOptFunctionName
is a string of a
maximum of 64
characters. The
string cannot be
null characters or
contain any of the
following
Default/Recommen
None LIOptFunction characters: double Read & Write
ded Value
quotation marks ("),
commas (,),
semicolons (;),
equal signs (=),
single quotation
marks ('), three plus
signs (+++), two or
more blanks, and
two or more
percentage signs
(%).

Default/Recommen
None LIOptFunction None Read Only
ded Value

Default/Recommen
None LIOptFunction None Read Only
ded Value

None N/A LIOptFunction None Read Only

None N/A LIOptFunction None Read Only

None N/A LIOptRule None Read Only

None N/A LIOptRule None Read Only

Default/Recommen
None LIOptRule None Read Only
ded Value

Default/Recommen
None LIOptRule None Read Only
ded Value

Default/Recommen
None LIOptRule None Read & Write
ded Value

Default/Recommen
None LIOptRule None Read Only
ded Value

Default/Recommen
None LIOptRule None Read Only
ded Value
 Default/Recommen
None LIOptRule None Read & Write
ded Value

Default/Recommen
None LIOptRule None Read & Write
ded Value

Default/Recommen
None LIOptRule None Read & Write
ded Value

None N/A LIOptRule None Read Only

Default/Recommen
None LIOptRuleMember None Read Only
ded Value

Default/Recommen
None LIOptRuleMember None Read Only
ded Value

Default/Recommen
None LIOptRuleMember None Read & Write
ded Value

Mcc in a
Radio Planning NCellPlmnList MO
None NCellPlmnList Read Only
(Internal planning) consists of digits
only.
Mnc in a
Radio Planning NCellPlmnList MO
None NCellPlmnList Read Only
(Internal planning) consists of digits
only.
None N/A NCellPlmnList None Read Only

None N/A NCellPlmnList None Read & Write

PccDlEarfcn in an
Radio Planning PccFreqCfg MO
None PccFreqCfg Read Only
(Internal planning) must be a valid
frequency.

Radio Planning
None PccFreqCfg None Read & Write
(Internal planning)
 Radio Planning
None PccFreqCfg None Read & Write
(Internal planning)

Radio Planning
None PccFreqCfg None Read & Write
(Internal planning)

Radio Planning
None PIMCellGroup None Read Only
(Internal planning)

Radio Planning
None PIMCellGroup None Read & Write
(Internal planning)

Radio Planning
None PIMCellGroup None Read & Write
(Internal planning)

Radio Planning
None PIMCellGroup None Read & Write
(Internal planning)
 Radio Planning
None PIMCellGroup None Read & Write
(Internal planning)

Radio Planning
None PIMCellGroup None Read Only
(Internal planning)

Radio Planning
None PIMCellGroup None Read Only
(Internal planning)

PccDlEarfcn in an
Radio Planning SccFreqCfg MO
None SccFreqCfg Read Only
(Internal planning) must be a valid
frequency.

SccDlEarfcn in an
Radio Planning SccFreqCfg MO
None SccFreqCfg Read Only
(Internal planning) must be a valid
frequency.
 Radio Planning
None SccFreqCfg None Read & Write
(Internal planning)

Radio Planning
None SccFreqCfg None Read & Write
(Internal planning)

Radio Planning
None SccFreqCfg None Read & Write
(Internal planning)
 Default/Recommen
10 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
5 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
5 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
10 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
10 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
20 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
20 ServiceDiffSetting None Read & Write
ded Value

Default/Recommen
20 ServiceDiffSetting None Read & Write
ded Value

0 Engineering Design ANR None Read & Write

200 Engineering Design ANR None Read & Write

1440 Engineering Design ANR None Read & Write

r4(4) Engineering Design ANR None Read & Write

5120ms Engineering Design ANR None Read & Write

60 Engineering Design ANR None Read & Write

-102 Engineering Design ANR None Read & Write

5 Engineering Design ANR None Read & Write

5 Engineering Design ANR None Read & Write

20 Engineering Design ANR None Read & Write

20 Engineering Design ANR None Read & Write

FREE(FREE) Engineering Design ANR None Read & Write

10080 Engineering Design ANR None Read & Write

200 Engineering Design ANR None Read & Write

OFF(Off) Engineering Design ANR None Read & Write

Default/Recommen
14:00:00 ANR None Read & Write
ded Value
 Default/Recommen
15:00:00 ANR None Read & Write
ded Value

-106 Engineering Design ANR None Read & Write

-103 Engineering Design ANR None Read & Write

-30 Engineering Design ANR None Read & Write

-16 Engineering Design ANR None Read & Write

40 Engineering Design ANR None Read & Write

0 Engineering Design ANR None Read & Write

NCL_MODE(NCL
Engineering Design ANR None Read & Write
Mode)
 Default/Recommen
BASED_NCL ANR None Read & Write
ded Value
 Default/Recommen
None ANR None Read & Write
ded Value
PERMIT_HO(PER Default/Recommen
ANR None Read & Write
MIT_HO) ded Value
 Default/Recommen
None ANR None Read & Write
ded Value

NO_CHECK(NO_C
Engineering Design ANR None Read & Write
HECK)
BASED_NCL(BASE Default/Recommen
ANR None Read & Write
D_NCL) ded Value
BASED_NCL(BASE Default/Recommen
ANR None Read & Write
D_NCL) ded Value
 Default/Recommen
none ANR None Read & Write
ded Value
4 Engineering Design ANR None Read & Write

8 Engineering Design ANR None Read & Write

 Radio Planning
None ANR None Read & Write
(Internal planning)

None Engineering Design ANR None Read & Write

 Radio Planning
0 ANR None Read & Write
(Internal planning)

Radio Planning
0 ANR None Read & Write
(Internal planning)

10080 Engineering Design ANR None Read & Write

The parameter
value 10 is
recommended
Engineering Design ANR None Read & Write
when neighbor
relationship removal
by ANR is enabled.
The parameter
value 10 is
recommended
Engineering Design ANR None Read & Write
when neighbor
relationship removal
by ANR is enabled.

10080 Engineering Design ANR None Read & Write

1440 Engineering Design NCellClassMgt None Read & Write

None Engineering Design NCellClassMgt None Read & Write

Equipment
None BfAnt None Read Only
Planning
 Default/Recommen
None BfAnt None Read & Write
ded Value

The RRU
connected to a
BfAnt must be
unique. In other
words, the
combination of
Equipment CONNCN,
0 BfAnt Read & Write
Planning CONNSRN, and
CONNSN of the
RRU to which a
beamforming
antenna is
connected must be
unique.

The RRU
connected to a
BfAnt must be
unique. In other
words, the
combination of
Equipment CONNCN,
None BfAnt Read & Write
Planning CONNSRN, and
CONNSN of the
RRU to which a
beamforming
antenna is
connected must be
unique.
 The RRU
connected to a
BfAnt must be
unique. In other
words, the
combination of
Equipment CONNCN,
None BfAnt Read & Write
Planning CONNSRN, and
CONNSN of the
RRU to which a
beamforming
antenna is
connected must be
unique.

Equipment
None BfAnt None Read & Write
Planning

Radio Planning
None BfAnt None Read & Write
(Internal planning)

Radio Planning
None BfAnt None Read & Write
(Internal planning)

Radio Planning
None BfAnt None Read & Write
(Internal planning)

The parameter is
used only when the
Default/Recommen
None BfAnt PROTOCOL Read & Write
ded Value
parameter is set to
TDL_IR.

Default/Recommen
0 BfAnt None Read & Write
ded Value

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

None N/A BfAnt None Read Only

Default/Recommen
10080 BlindNcellOpt None Read & Write
ded Value

Default/Recommen
200 BlindNcellOpt None Read & Write
ded Value

Default/Recommen
98 BlindNcellOpt None Read & Write
ded Value

Default/Recommen
98 BlindNcellOpt None Read & Write
ded Value

Default/Recommen
98 BlindNcellOpt None Read & Write
ded Value

CONTROLLED(CO Default/Recommen
BlindNcellOpt None Read & Write
NTROLLED) ded Value
 Radio Planning
None IpServiceQos None Read Only
(Internal planning)

Radio Planning
None IpServiceQos None Read & Write
(Internal planning)

Radio Planning
None IpServiceQos None Read & Write
(Internal planning)

Radio Planning
None IpServiceQos None Read & Write
(Internal planning)

Radio Planning
None IpServiceQos None Read & Write
(Internal planning)

Radio Planning
0~127 IpServiceQos None Read & Write
(Internal planning)

Default/Recommen
5 QoEHoCommonCfg None Read & Write
ded Value
 Default/Recommen
3 QoEHoCommonCfg None Read & Write
ded Value

Radio Planning
None QosPolicy None Read Only
(Internal planning)

In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0.
In a QosPolicy MO,
if TrafficType is set
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than
Radio Planning
OTHER(OTHER) QosPolicy 0. Read & Write
(Internal planning)
In a QosPolicy MO,
if TrafficType is set
to VIDEO,
PriQueueId must be
set to QUEUE5,
QUEUE6, or
QUEUE7.
In a QosPolicy MO,
if TrafficType is set
to DOWNLOAD,
PriQueueId must be
set to QUEUE0,
QUEUE1, or
QUEUE2.
 In a QosPolicy MO,
if TrafficType is set
to VIDEO,
PriQueueId must be
set to QUEUE5,
QUEUE6, or
Radio Planning QUEUE7.
None QosPolicy Read & Write
(Internal planning) In a QosPolicy MO,
if TrafficType is set
to DOWNLOAD,
PriQueueId must be
set to QUEUE0,
QUEUE1, or
QUEUE2.

In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0.
Radio Planning
None QosPolicy In a QosPolicy MO, Read & Write
(Internal planning)
if TrafficType is set
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than
0.

In a QosPolicy MO,
if TrafficType is set
to VIDEO, DlSgbr
must be set to a
value greater than 0
and DlSmbr must
be set to 0.
Radio Planning
None QosPolicy In a QosPolicy MO, Read & Write
(Internal planning)
if TrafficType is set
to DOWNLOAD,
DlSgbr must be set
to 0 and DlSmbr
must be set to a
value greater than
0.
None Engineering Design CaGroup None Read Only

None Engineering Design CaGroup None Read & Write

None Engineering Design CaGroup None Read & Write

None Engineering Design CaGroupCell None Read Only

None Engineering Design CaGroupCell None Read Only

 Radio Planning
None CaGroupCell None Read Only
(Internal planning)

Radio Planning
None CaGroupCell None Read & Write
(Internal planning)
 Radio Planning
None CaGroupCell None Read & Write
(Internal planning)

Radio Planning
None CaGroupCell None Read & Write
(Internal planning)

None N/A CaGroupCell None Read Only

None N/A CaGroupCell None Read Only

None N/A CaGroupCell None Read Only

None N/A CaGroupCell None Read Only

None N/A CaGroupCell None Read Only

BOOLEAN_FALSE(
Engineering Design CellIdPrdUpt None Read & Write
False)

2000-01-
Engineering Design CellIdPrdUpt None Read & Write
01T00:00:00+00:00

1 Engineering Design CellIdPrdUpt None Read & Write

In the
CspcAlgoPara MO,
Default/Recommen TddCspcAlgoSwitch
OFF(Off) CspcAlgoPara Read & Write
ded Value and
CspcAlgoSwitch are
mutually exclusive.

RSRP_UL(Uplink Default/Recommen
CspcAlgoPara None Read & Write
RSRP) ded Value

STATIC_CONFIG(S Default/Recommen
CspcAlgoPara None Read & Write
tatic Config) ded Value
 Default/Recommen
5 CspcAlgoPara None Read & Write
ded Value

Default/Recommen
ON(On) CspcAlgoPara None Read & Write
ded Value

Default/Recommen
5 CspcAlgoPara None Read & Write
ded Value
7 N/A CspcAlgoPara None Read & Write

Default/Recommen
1 CspcAlgoPara None Read & Write
ded Value
 Default/Recommen
70 CspcAlgoPara None Read & Write
ded Value

In the
CspcAlgoPara MO,
TddCspcMacroMicr Default/Recommen TddCspcAlgoSwitch
CspcAlgoPara Read & Write
oSwitch:Off ded Value and
CspcAlgoSwitch are
mutually exclusive.

Radio Planning eNodeBUSServerCf

None None Read Only
(Internal planning) g

Default/Recommen eNodeBUSServerCf
None None Read & Write
ded Value g

Radio Planning eNodeBUSServerCf

None None Read & Write
(Internal planning) g

Radio Planning eNodeBUSServerCf

None(Not_Check) None Read & Write
(Internal planning) g

Radio Planning
None EutranSpePciCell None Read Only
(Internal planning)

Radio Planning
None EutranSpePciCell None Read Only
(Internal planning)
 Radio Planning
None EutranSpePciCell None Read & Write
(Internal planning)
HoAlgoSwitch
Cdma20001xRttCsf
parameter in the
bSwitch:Off,
ENodeBAlgoSwitch
UtranServiceHoSwit
is On, the
ch:Off,
ServiceBasedInterF
GeranServiceHoSw
reqHoSwitch,
itch:Off,
UtranServiceHoSwit
Cdma2000HrpdSer
ch,
viceHoSwitch:Off,
GeranServiceHoSw
Cdma20001xRttSer
itch,
viceHoSwitch:Off,
CdmaHrpdServiceH
UlQualityInterRATH
oSwitch, or
oSwitch:Off,
Cdma1xRttService
InterPlmnHoSwitch:
HoSwitch check
Off,
box under the
UtranFlashCsfbSwit
HoAlgoSwitch
ch:Off,
parameter in the
GeranFlashCsfbSwi
ENodeBAlgoSwitch
tch:Off,
cannot be On.
ServiceBasedInterF Engineering Design ENodeBAlgoSwitch Read & Write
If any of the
reqHoSwitch:Off,
ServiceBasedInterF
UlQualityInterFreqH
reqHoSwitch,
oSwitch:Off,
UtranServiceHoSwit
CsfbAdaptiveBlindH
ch,
oSwitch:Off,
GeranServiceHoSw
UtranCsfbSteeringS
itch,
witch:Off,
CdmaHrpdServiceH
GeranCsfbSteering
oSwitch, or
Switch:Off,
Cdma1xRttService
CSFBLoadInfoSwit
HoSwitch checkbox
ch:Off,
under the
Cdma1XrttEcsfbSwi
HoAlgoSwitch
tch:Off,
parameter in the
EmcBlindHoA1Swit
ENodeBAlgoSwitch
ch:Off,
is On, the
EmcInterFreqBlind
ServiceReqInterFre
HoSwitch:Off,
qHoSwitch check
EPlmnSwitch:Off,
box under the
GeranVoipCapSwitc
h:Off,
Cdma1xRttVoipCap
Switch:Off,
UtranPsHoSwitch:O
ff,
GeranPsHoSwitch:
Off,
CdmaHrpdNonOtpi
misedHoSwitch:Off,
CdmaHrpdOptimise
dHoSwitch:Off,
GeranNaccSwitch:
Off,
GeranCcoSwitch:Of
f,
UtranSrvccSwitch:O
ff,
GeranSrvccSwitch: Engineering Design ENodeBAlgoSwitch None Read & Write
Off,
Cdma1xRttSrvccSw
itch:Off,
UtranRedirectSwitc
h:Off,
GeranRedirectSwitc
h:Off,
CdmaHrpdRedirect
Switch:Off,
Cdma1xRttRedirect
Switch:Off,
BlindHoSwitch:Off,
LcsSrvccSwitch:Off,
AutoGapSwitch:Off,
UeVoipOnHspaCap
Switch:Off,
UtranFddB1CapSwi
tch:Off,
 Cells with
customized
bandwidths support
only static ICIC.
The
DlIcicSwitch_OFF_
Engineering Design ENodeBAlgoSwitch DlIcicDynamicSwitc Read & Write
ENUM
h_ON_ENUM and
DlIcicReuse3Switch
_ON_ENUM values
do not take effect
for these cells.
IntraRatEventAnrS
witch:Off,
IntraRatFastAnrSwit
ch: Off,
IntraRatAnrAutoDel
Switch: On,
UtranEventAnrSwitc
h: Off,
GeranEventAnrSwit
ch: Off,
UtranFastAnrSwitch
: Off,
GeranFastAnrSwitc
h: Off,
CdmaFastAnrSwitc
h: Off,
UtranAutoNrtDelete
Switch:On,
GeranAutoNrtDelet
Engineering Design ENodeBAlgoSwitch None Read & Write
eSwitch:On,
CdmaAutoNrtDelete
Switch:On,
ExtendIntraRatAnrS
witch: Off,
CdmaEventAnrSwit
ch: Off,
MlbBasedEventAnr
Switch: Off,
IntraRatNoHoSetAn
rSwitch: Off,
IntraRatDoubleThd
AnrSwitch: Off,
ServiceBasedEvent
AnrSwitch: Off,
ServiceReqEventA
nrSwitch: Off,
IntraRatEnhancedE
ventAnrSwitch: Off
LoadBasedSwitch:
Off,
GeranFlashRedirect
Engineering Design ENodeBAlgoSwitch None Read & Write
Switch:Off,
UranFlashRedirect
Switch:Off
IntraFreqMroAlgoS
witch:Off,
InterFreqMroAlgoS
witch: Off,
UtranMroSwitch:
Off,
GeranMroSwitch:
Off,
UeMroAlgoSwitch:
Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
IntraFreqReselOptS
witch: Off,
UtranUnnecHoOptS
witch: Off,
GeranUnnecHoOpt
Switch: Off,
IntraRatCallbackSw
tich: Off,
UnnecHoOptWithou
tRIM:Off

OFF(Off) Engineering Design ENodeBAlgoSwitch None Read & Write

TpeAlgoSwitch:Off Engineering Design ENodeBAlgoSwitch None Read & Write

 Default/Recommen
OFF(Off) ENodeBAlgoSwitch None Read & Write
ded Value

OFF(Off) Engineering Design ENodeBAlgoSwitch None Read & Write

OTDOA switch:Off,
Default/Recommen
EcidInterFreqMeas ENodeBAlgoSwitch None Read & Write
ded Value
Switch:off
UU flow control
Engineering Design ENodeBAlgoSwitch None Read & Write
switch:Off

Default/Recommen
OFF(Off) ENodeBAlgoSwitch None Read & Write
ded Value

Symbol shutdown
Engineering Design ENodeBAlgoSwitch None Read & Write
switch:off
UTRAN RIM
Switch:Off, GERAN Engineering Design ENodeBAlgoSwitch None Read & Write
RIM Switch:Off

NBSLTEPLMNRou
ndSwitch:Off,
NBSLTERANSharin
gSwitch:Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
NBSUTRANRANSh
aringSwitch:Off,
NBSGERANRANSh
aringSwitch:Off
UtranFreqLayerMea
sSwitch:Off,
UtranFreqLayerBlin
Engineering Design ENodeBAlgoSwitch None Read & Write
dSwitch:Off,
UtranSrvccSteering
Switch:Off

Default/Recommen
None ENodeBAlgoSwitch None Read & Write
ded Value

VQM_ALGO_SWIT
Engineering Design ENodeBAlgoSwitch None Read & Write
CH_OFF(Disable)
IntraOpUeNumPree
mptSwitch:Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
InterOpUeNumPree
mptSwitch:Off

UtranSepOpMobility
Engineering Design ENodeBAlgoSwitch None Read & Write
Switch:Off
UlJointReceptionOv
erBBUsSwitch:Off,
FreqCfgCaOverBB
UsSwitch:Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
UlJROverRelaxedB
HSw:Off,
UlSfnJROverBBUs
Switch:Off

LcsInterRatMeasSw Default/Recommen
ENodeBAlgoSwitch None Read & Write
itch:Off ded Value
ReduceInvalidA1A2
RptSigSwitch:Off,
MultiQciHoExecOpt
Switch:Off,
ReduceInvalidFreq
PriHoSwitch:Off, Default/Recommen
ENodeBAlgoSwitch None Read & Write
AddA2MeasIfQciAd ded Value
jSwitch:Off,
InterFreqHoA2OptS
witch:Off,
McUtranNcellNumO
ptSwtich:Off
UECapRprtAbnorm
alCtrlSwitch:Off,
ApCqiRptAbnormal
CtrlSwitch:Off,
UeInterRatMeasCtrl
Switch:Off,
VoipExProtSwitch:O
Engineering Design ENodeBAlgoSwitch None Read & Write
ff,
ApCqiAndAckAbnC
trlSwitch:Off,
UeSRSAntSelectCtr
lSwitch:Off,
CaCqiAndAckAbnC
trlSwitch:Off
 Default/Recommen
None ENodeBAlgoSwitch None Read & Write
ded Value

OFF(Off) N/A ENodeBAlgoSwitch None Read & Write

OFF(Off) N/A ENodeBAlgoSwitch None Read & Write

None Engineering Design ENodeBAlgoSwitch None Read & Write

PdcchOverlapSrch
SpcSwitch:On,
CaCapbFiltSwitch:
Off,
GbrAmbrJudgeSwit
ch:Off,
AdpCaSwitch:Off, N/A ENodeBAlgoSwitch None Read & Write
CaHoControlSwitch
:Off,
FreqPriBasedHoCa
FiltSwitch:On,
CaSccSuspendSwit
ch:Off
INTER_FREQ_IDL
E_MLB_SWITCH:O Engineering Design ENodeBAlgoSwitch None Read & Write
ff
BasedSriGapOptS
witch:On,
L2UBasedHoPolicy
Engineering Design ENodeBAlgoSwitch None Read & Write
PenaltySwitch:Off,
DrxBasedSriGapOp
tSwitch:On
SPECSIGRETRAN
SOPTSWITCH:Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
FlowCtrlTriBackoffS
witch:Off
LOADNOTBALANC
Engineering Design ENodeBAlgoSwitch None Read & Write
ESCHSWITCH:Off

Radio Planning
OFF(Off) ENodeBAlgoSwitch None Read & Write
(Internal planning)
ON(On),which
enables smooth
upgrade and N/A ENodeBAlgoSwitch None Read & Write
therefore is
recommended.

TransDropPktsStat Default/Recommen
ENodeBAlgoSwitch None Read & Write
Switch:Off ded Value

GERAN_SWITCH:
Off,
Engineering Design ENodeBAlgoSwitch None Read & Write
UTRAN_SWITCH:
Off
 Radio Planning
None ENodeBAlgoSwitch None Read & Write
(Internal planning)

L2 Load Balance Radio Planning

ENodeBAlgoSwitch None Read & Write
Switch:Off (Internal planning)

The parameter
value ON(On) is
recommended
when the RACH Default/Recommen
ENodeBAlgoSwitch None Read & Write
success rate is ded Value
lower than the
predefined RACH
success rate.
ACHSwitch:Off N/A ENodeBAlgoSwitch None Read & Write

Default/Recommen
None ENodeBAlgoSwitch None Read & Write
ded Value

BaseBandResetSwi
tch:On,
RFResetSwitch:On,
Default/Recommen
BBPResetDelaySwi ENodeBAlgoSwitch None Read & Write
ded Value
tch:On,
RFResetDelaySwitc
h:On

COLLISION_DETE
CT_SWITCH:Off,C Default/Recommen
ENodeBAlgoSwitch None Read & Write
ONFUSION_DETE ded Value
CT_SWITCH:On
DlCaLbAlgoSwitch: Default/Recommen
ENodeBAlgoSwitch None Read & Write
Off ded Value

Radio Planning
OFF(Off) ENodeBAlgoSwitch None Read & Write
(Internal planning)

The
CompactRANMultiA
PN parameter in
the
ENodeBAlgoSwitch
Radio Planning
None ENodeBAlgoSwitch MO can be set to Read & Write
(Internal planning)
ON(On) only when
the
EUCompactRANSw
itch parameter is
set to ON(On).
ADAPTIVE_PROP
Engineering Design eNodeBMlb None Read & Write
ORTION:Off
1440 Engineering Design eNodeBMlb None Read & Write
3 Engineering Design eNodeBMlb None Read & Write
 Default/Recommen
3CC(3CC) eNodeBMlb None Read & Write
ded Value

Default/Recommen
0 eNodeBMlb None Read & Write
ded Value

25 Engineering Design LicRatio None Read & Write

SHARING(Sharing) Engineering Design LicRatio None Read & Write

 Radio Planning
None LicRatioSharePolicy None Read Only
(Internal planning)

The sum of TrfRatio

in all
LicRatioSharePolicy
MOs cannot exceed
100.
Radio Planning
None LicRatioSharePolicy In the Read & Write
(Internal planning)
LicRatioSharePolicy
MO,
TrfSharingRatio
cannot exceed
TrfRatio.

In the
LicRatioSharePolicy
Radio Planning MO,
0 LicRatioSharePolicy Read & Write
(Internal planning) TrfSharingRatio
cannot exceed
TrfRatio.

Default/Recommen
1440 MRO None Read & Write
ded Value

Default/Recommen
99 MRO None Read & Write
ded Value

Default/Recommen
1000 MRO None Read & Write
ded Value
 Default/Recommen
1 MRO None Read & Write
ded Value

Default/Recommen
5 MRO None Read & Write
ded Value

Default/Recommen
60 MRO None Read & Write
ded Value

Default/Recommen
-116 MRO None Read & Write
ded Value

Default/Recommen
-116 MRO None Read & Write
ded Value

Default/Recommen
5 MRO None Read & Write
ded Value
 In the MRO MO,
20 for newly
InterFreqA2RollBac
deployed networks
Default/Recommen kThd must be
with inter-frequency MRO Read & Write
ded Value smaller than
MRO deployed for
InterFreqMeasTooL
the first time
ateHoThd.

In the MRO MO,

InterFreqA2RollBac
Default/Recommen kThd must be
2 MRO Read & Write
ded Value smaller than
InterFreqMeasTooL
ateHoThd.

Default/Recommen
FREE(FREE) MRO None Read & Write
ded Value
 Default/Recommen
95 MRO None Read & Write
ded Value

Default/Recommen
-115 MRO None Read & Write
ded Value
 Default/Recommen
-118 MRO None Read & Write
ded Value

Default/Recommen
1000 MRO None Read & Write
ded Value
 Default/Recommen
70 MRO None Read & Write
ded Value

Default/Recommen
70 MRO None Read & Write
ded Value

Default/Recommen
10 MRO None Read & Write
ded Value

Default/Recommen
None MRO None Read & Write
ded Value
 Default/Recommen
3 MRO None Read & Write
ded Value
 Radio Planning
10 MRO None Read & Write
(Internal planning)
 Radio Planning
20 MRO None Read & Write
(Internal planning)
 Radio Planning
20 MRO None Read & Write
(Internal planning)
 Default/Recommen
2 MRO None Read & Write
ded Value

None Engineering Design SimuLoad None Read Only

Default/Recommen
50 SimuLoad None Read & Write
ded Value

Default/Recommen
50 SimuLoad None Read & Write
ded Value

Default/Recommen
500 SimuLoad None Read & Write
ded Value

Default/Recommen
5000 SimuLoad None Read & Write
ded Value
 Default/Recommen
OFF(Off) SimuLoad None Read & Write
ded Value

OFF(Off) Engineering Design TcpAckCtrlAlgo None Read & Write

0 Engineering Design TcpAckCtrlAlgo None Read & Write

1 Engineering Design TcpAckCtrlAlgo None Read & Write

Default/Recommen
OFF(Off) TcpMssCtrl None Read & Write
ded Value

Default/Recommen
1460 TcpMssCtrl None Read & Write
ded Value
 Default/Recommen
0 TddFrameOffset None Read & Write
ded Value

OFF(Off) Engineering Design TddResModeSwitch None Read & Write

You are advised to
set this parameter
to ON in either of
the following
scenarios:
Only some cells
served by the
eNodeB are bound Engineering Design TddResModeSwitch None Read & Write
to baseband
processing units.
The UBBPd is
installed in the
eNodeB, and cell
combination must
be enabled.

3 Engineering Design TpeAlgo None Read & Write

20 Engineering Design TpeAlgo None Read & Write

80 Engineering Design TpeAlgo None Read & Write

8080 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

0 Engineering Design TpeAlgo None Read & Write

100 Engineering Design VQMAlgo None Read & Write

In the VQMAlgo
MO,
VqiExcellentThd
must be larger than
300 Engineering Design VQMAlgo VqiGoodThd. Read & Write
In the VQMAlgo
MO, VqiGoodThd
must be larger than
VqiPoorThd.

In the VQMAlgo
MO, VqiGoodThd
must be larger than
VqiPoorThd.
200 Engineering Design VQMAlgo Read & Write
In the VQMAlgo
MO, VqiPoorThd
must be larger than
VqiBadThd.

In the VQMAlgo
MO, VqiPoorThd
100 Engineering Design VQMAlgo Read & Write
must be larger than
VqiBadThd.
10 Engineering Design VQMAlgo None Read & Write
5 Engineering Design VQMAlgo None Read & Write
2 Engineering Design VQMAlgo None Read & Write
1 Engineering Design VQMAlgo None Read & Write

In the VQMAlgo
MO,
Default/Recommen
400 VQMAlgo VqiExcellentThd Read & Write
ded Value
must be larger than
VqiGoodThd.
20 Engineering Design VQMAlgo None Read & Write
15 Engineering Design VQMAlgo None Read & Write
10 Engineering Design VQMAlgo None Read & Write
30 Engineering Design VQMAlgo None Read & Write

Default/Recommen
5 eNBLicenseAlmThd None Read & Write
ded Value

In the
eNBLicenseAlmThd
Default/Recommen
100 eNBLicenseAlmThd MO, RTHD must be Read & Write
ded Value
smaller than or
equal to OTHD.

Default/Recommen
5 eNBLicenseAlmThd None Read & Write
ded Value

In the
eNBLicenseAlmThd
Default/Recommen
90 eNBLicenseAlmThd MO, RTHD must be Read & Write
ded Value
smaller than or
equal to OTHD.
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value
 Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

Default/Recommen
None eNBRsvdPara None Read & Write
ded Value

eNodeBAutoPower
None Engineering Design None Read & Write
Off

In the
eNodeBAutoPower
Off MO,
PowerOffTime must
be set to a time in
the range of
22:00:00 to
05:00:00 of the next
day.
In the
eNodeBAutoPower
Off MO, the value of
eNodeBAutoPower PowerOnTime must
None Engineering Design Read & Write
Off be one hour later
than that of
PowerOffTime.
If
AutoPowerOffSwitc
h is set to ON,
PowerOffTime must
be set.
If
AutoPowerOffSwitc
h is set to OFF,
PowerOffTime does
not need to be set.
 In the
eNodeBAutoPower
Off MO,
PowerOnTime must
be set to a time in
the range of
23:00:00 to
06:00:00 of the next
day.
In the
eNodeBAutoPower
Off MO, the value of
eNodeBAutoPower PowerOnTime must
None Engineering Design Read & Write
Off be one hour later
than that of
PowerOffTime.
If
AutoPowerOffSwitc
h is set to ON,
PowerOnTime must
be set.
If
AutoPowerOffSwitc
h is set to OFF,
PowerOnTime does
not need to be set.

eNodeBAutoPower
None N/A None Read Only
Off
 eNodeBFlowCtrlPar
4 Engineering Design None Read & Write
a
 eNodeBFlowCtrlPar
100 Engineering Design None Read & Write
a
FLOWCONTROL(F Default/Recommen eNodeBFlowCtrlPar
None Read & Write
LOWCONTROL) ded Value a

Default/Recommen eNodeBFlowCtrlPar
80 None Read & Write
ded Value a
 Service
Interruption Validation of
Interrupted After Interruption Scope Caution
Duration (min) Modification
Modification

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None.
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
N/A N/A N/A N/A N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

No (And no impact
on the UE in idle N/A N/A None N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
Noo/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact Set this parameter
modification has no
on the UE in idle N/A N/A based on the train
impact on the
mode) speed.
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
No N/A N/A None
impact on the
equipment.

The parameter
modification has no
No N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

In hybrid RAN
sharing mode, if
this parameter
value is changed,
the eNodeB
automatically sets
up S1 interfaces,
X2 interfaces, and The parameter
cells in the RAN modification takes
Less than 0.1
Yes Cell sharing group to effect after the link
minute
make the is automatically
modifications to this reestablished .
parameter take
effects. In other
RAN sharing
modes, modification
to this parameter
has no effects on
the network.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
value cannot be
smaller than the
value of
DefaultPagingCycle
The parameter
No (And no impact in the PCCHCFG
modification has no
on the UE in idle N/A N/A MO for any cell
impact on the
mode) under the same
equipment.
eNodeB.
Otherwise, the
possibility of paging
failures will
increase.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The board should

Less than 3 be reset to validate
Yes LMPT borad None
minutes the parameter
modification.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The application
should be reset to
Less than 3
Yes eNodeB None validate the
minutes
parameter
modification.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 If this parameter is
set to a value
indicating that more
than 1200
synchronized UEs
are supported by a
BBP, set
parameters The parameter
No (And no impact
DeltaShift and modification has no
on the UE in idle N/A N/A
FddSrsCfgMode to impact on the
mode)
DS1_DELTA_SHIF equipment.
T(ds1) and
ADAPTIVEMODE(A
daptive Mode),
respectively to
support data
transmission for
more UEs.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

If the
HighSpeedFlag
parameter is set to
HIGH_SPEED(High
speed cell flag),
ULTRA_HIGH_SPE
ED(Ultra high The parameter
No (And no impact
speed cell flag), or modification has no
on the UE in idle N/A N/A
EXTRA_HIGH_SPE impact on the
mode)
ED(Extra high equipment.
speed cell flag), you
are advised not to
set the
SecKeyRecfgSwitc
h parameter to
ON(On).
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 UltraFlashCsfbCom
OptSw: Ultra-flash
CSFB is a Huawei-
proprietary feature.
To resolve possible The parameter
No (And no impact
UE incompatibility modification has no
on the UE in idle N/A N/A
risks in ultra-flash impact on the
mode)
CSFB, Huawei equipment.
eNodeBs and
Huawei MMEs are
required and
cooperates.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The link should be

No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.

The link should be

No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.
The transport path
No (And no impact should be
on the UE in idle N/A N/A None reestablished after
mode) the parameter
modification.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

 The parameter
modification has no
Yes eNodeB Less than 1 minute None
impact on the
equipment.

The parameter
modification has no
Yes eNodeB Less than 1 minute None
impact on the
equipment.

The parameter
modification has no
Yes eNodeB Less than 1 minute None
impact on the
equipment.

N/A N/A N/A None N/A

The link should be

Less than 0.1 reestablished after
Yes eNodeB None
minute the parameter
modification.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The link should be

Less than 0.1 reestablished after
Yes eNodeB None
minute the parameter
modification.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

Less than 0.1

N/A Cell N/A N/A
minute

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

 The change of this
parameter will be
updated to all S1
links under this S1
The parameter
object, and
modification takes
Less than 0.1 therefore these S1
Yes Cell effect after the link
minute links may be
is automatically
reestablished. To
reestablished .
view S1 links under
an S1 object, run
the DSP S1
command.

If the value of this

parameter is
changed, S1
interfaces under The link should be
Less than 0.1 this S1 object will reestablished after
Yes Cell
minute be removed, and the parameter
new S1 interfaces modification.
will be established
based on the new
end point group.

Changing the value

The transport path
of User Plane End
should be
Less than 0.1 Point Group ID for
Yes Cell reestablished after
minute an S1 object may
the parameter
lead to service
modification.
interruption.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The link should be

Less than 0.1 reestablished after
Yes Cell None
minute the parameter
modification.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

Modification to this
parameter affects
all the S1 interfaces
managed by this S1
MO. To query the
S1 interfaces
managed by this S1
MO, run the DSP
S1 command. If the
eNodeB works in
hybrid RAN sharing The parameter
mode, the eNodeB modification takes
Less than 0.1
Yes Cell automatically sets effect after the link
minute
up S1 interfaces to is automatically
make the reestablished .
modifications to this
parameter take
effect. If the
eNodeB works in
other RAN sharing
mode, the
modification to this
parameter has no
impact on the
network.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

Less than 0.1

N/A Cell N/A N/A
minute

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the link
minute
is automatically
reestablished .

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the link
minute
is automatically
reestablished .

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (After an S1
The parameter
interface is blocked,
modification has no
UEs in idle mode N/A N/A None
impact on the
cannot access the
equipment.
network.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

If the eNodeB
works in hybrid
RAN sharing mode,
the eNodeB
automatically sets
up the S1 interfaces
to make the
The parameter
modification to this
modification takes
Less than 0.1 parameter take
Yes Cell effect after the link
minute effects. If the
is automatically
eNodeB works in
reestablished .
other RAN sharing
mode, this
parameter is invalid
and the setting of
this parameter has
no impact on the
network.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The link should be

No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.
 The link should be
No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.
The transport path
No (And no impact should be
on the UE in idle N/A N/A None reestablished after
mode) the parameter
modification.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Until the eNodeB The parameter

Services provided
FDD baseband modification has no
Yes by the baseband None
resource is impact on the
resource
unblocked equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Yes N/A N/A None N/A

Until the eNodeB The parameter

The baseband TDD baseband modification has no
Yes None
resource itself resource is impact on the
unblocked equipment.
No N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The link should be
No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.
The link should be
No (And no impact
reestablished after
on the UE in idle N/A N/A None
the parameter
mode)
modification.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The change of this

parameter will be
updated to all X2
links under this X2
The parameter
object, and
modification takes
Less than 0.1 therefore these X2
Yes eNodeB effect after the link
minute links may be
is automatically
reestablished. To
reestablished .
view X2 links under
an X2 object, run
the DSP X2
command.

If the value of this

parameter is
changed, X2
interfaces under The link should be
Less than 0.1 this X2 object will reestablished after
Yes eNodeB
minute be removed, and the parameter
new X2 interfaces modification.
will be established
based on the new
end point group.

Changing the value

of User Plane End The link should be
Less than 0.1 Point Group ID for reestablished after
Yes eNodeB
minute an X2 object may the parameter
lead to service modification.
interruption.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
Less than 0.1 modification has no
Yes eNodeB None
minute impact on the
equipment.

The modification of
this parameter
affects the X2
interfaces managed
by this X2 MO. To
query the X2
interface managed
by this X2 MO, run
the DSP X2
command. If the
eNodeB works in
hybrid RAN sharing The parameter
mode, the eNodeB modification takes
Less than 0.1
Yes eNodeB automatically sets effect after the link
minute
up the X2 interfaces is automatically
to make the reestablished .
modifications to this
parameter take
effects. If the
eNodeB works in
other RAN sharing
mode, this
parameter is invalid
and the setting of
this parameter has
no impact on the
network.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes eNodeB None effect after the link
minute
is automatically
reestablished .

The parameter
modification takes
Less than 0.1
Yes eNodeB None effect after the link
minute
is automatically
reestablished .

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

If the eNodeB
works in hybrid
RAN sharing mode,
the eNodeB
automatically sets
up the X2 interfaces
to make the
The parameter
modification to this
modification takes
Less than 0.1 parameter take
Yes eNodeB effect after the link
minute effects. If the
is automatically
eNodeB works in
reestablished .
other RAN sharing
mode, this
parameter is invalid
and the setting of
this parameter has
no impact on the
network.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes eNodeB None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

No (And no impact
on the UE in idle
mode. This
The parameter
parameter is used
modification has no
with other N/A N/A None
impact on the
parameters related
equipment.
to cell access
barring to control
the UE accesses.)

No (For the UE in
idle mode, if it is
BOOLEAN_TRUE,
The parameter
the emergency calls
modification has no
initiated by the UEs N/A N/A None
impact on the
of access
equipment.
categories 0 to 9 or
UEs without IMSI
are rejected.)

No (The access
request of the
mobile-originated
call initiated by a The parameter
UE in idle mode is modification has no
N/A N/A None
accepted or impact on the
rejected according equipment.
to the
corresponding
barring status.)
No (For the UE in
idle mode, the
source call
accesses are The parameter
allowed only when modification has no
N/A N/A None
the random number impact on the
generated by the equipment.
UE is smaller than
the access
probability factor.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
No (And no impact
on the UE in idle
mode. If this The parameter
parameter is set to modification has no
N/A N/A None
BOOLEAN_TRUE, impact on the
UEs of access class equipment.
11 are not allowed
to initiate calls.)

No (And no impact
on the UE in idle
mode. If this
parameter is set to The parameter
BOOLEAN_TRUE, modification has no
N/A N/A None
the mobile- impact on the
originated calls equipment.
initiated by UEs of
access class 12 are
not allowed.)

No (And no impact
on the UE in idle
mode. If this
parameter is set to The parameter
BOOLEAN_TRUE, modification has no
N/A N/A None
the mobile- impact on the
originated calls equipment.
initiated by UEs of
access class 13 are
not allowed.)

No (And no impact
on the UE in idle
mode. If this
parameter is set to The parameter
BOOLEAN_TRUE, modification has no
N/A N/A None
the mobile- impact on the
originated calls equipment.
initiated by UEs of
access class 14 are
not allowed.)

No (And no impact
on the UE in idle
mode. If this
parameter is set to The parameter
BOOLEAN_TRUE, modification has no
N/A N/A None
the mobile- impact on the
originated calls equipment.
initiated by UEs of
access class 15 are
not allowed.)
No (The access
request of the
signaling initiated
The parameter
by a UE in idle
modification has no
mode is accepted N/A N/A None
impact on the
or rejected
equipment.
according to the
corresponding
barring status.)

No (The signaling
initiated by a UE in
idle mode is
The parameter
granted access only
modification has no
when the random N/A N/A None
impact on the
number generated
equipment.
by the UE is smaller
than the access
probability factor.)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle
mode. If this
The parameter
parameter is set to
modification has no
BOOLEAN_TRUE, N/A N/A None
impact on the
the signaling
equipment.
access initiated by
UEs of access class
11 are not allowed.)

No (And no impact
on the UE in idle
mode. If this
The parameter
parameter is set to
modification has no
BOOLEAN_TRUE, N/A N/A None
impact on the
the signaling
equipment.
access initiated by
UEs of access class
12 are not allowed.)

No (And no impact
on the UE in idle
mode. If this
The parameter
parameter is set to
modification has no
BOOLEAN_TRUE, N/A N/A None
impact on the
the signaling
equipment.
access initiated by
UEs of access class
13 are not allowed.)
No (And no impact
on the UE in idle
mode. If this
The parameter
parameter is set to
modification has no
BOOLEAN_TRUE, N/A N/A None
impact on the
the signaling
equipment.
access initiated by
UEs of access class
14 are not allowed.)

No (And no impact
on the UE in idle
mode. If this
The parameter
parameter is set to
modification has no
BOOLEAN_TRUE, N/A N/A None
impact on the
the signaling
equipment.
access initiated by
UEs of access class
15 are not allowed.)

No (The access
request of MMTEL
voice services
The parameter
initiated by a UE in
modification has no
idle mode is N/A N/A None
impact on the
accepted or barred
equipment.
based on the
corresponding
barring indicator.)
No (If the random
number generated
by the UE in idle
The parameter
mode is less than
modification has no
this access N/A N/A None
impact on the
probability factor,
equipment.
the MMTEL voice
service is granted
access.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (The access
request of MMTEL
video services
The parameter
initiated by a UE in
modification has no
idle mode is N/A N/A None
impact on the
accepted or barred
equipment.
based on the
corresponding
barring indicator.)
No (If the random
number generated
by the UE in idle
The parameter
mode is less than
modification has no
this access N/A N/A None
impact on the
probability factor,
equipment.
the MMTEL video
service is granted
access.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (The access
request of the
CSFB service
The parameter
initiated by a UE in
modification has no
idle mode is N/A N/A None
impact on the
accepted or barred
equipment.
based on
corresponding
barring status.)
No (If the random
number generated
by the UE in idle The parameter
mode is less than modification has no
N/A N/A None
this access impact on the
probability factor, equipment.
the CS service is
granted access.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
will affect the cell on N/A N/A None
impact on the
which the UE in idle
equipment.
mode camps.)
No (Modifications
The parameter
on this parameter
modification has no
will affect the cell on N/A N/A None
impact on the
which the UE in idle
equipment.
mode camps.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.
 The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.
 The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
selection of the UE
equipment.
in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
selection of the UE
equipment.
in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
selection of the UE
equipment.
in idle mode.)

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The setting of the
PassLossCoeff
parameter affects
that of the
P0NominalPUSCH
parameter. If
PassLossCoeff is
set to a small value,
it is recommended
that
P0NominalPUSCH
be set to a large
value to achieve
higher sector
throughput. If
PassLossCoeff is
set to a large value,
The parameter
No (And no impact it is recommended
modification has no
on the UE in idle N/A N/A that
impact on the
mode) P0NominalPUSCH
equipment.
be set to a small
value to ensure
higher data rates
for CEUs. For
example, if
PassLossCoeff is
set to 0, it is
recommended that
P0NominalPUSCH
be set to a large
value such as –10;
if PassLossCoeff is
set to 1, it is
recommended that
P0NominalPUSCH
be set to a small
value such as –96.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The setting of the
P0NominalPUSCH
parameter affects
that of the
PassLossCoeff
parameter. If
P0NominalPUSCH
is set to a large
value, it is
recommended that
The parameter
No (And no impact PassLossCoeff be
modification has no
on the UE in idle N/A N/A set to a small value
impact on the
mode) to achieve higher
equipment.
sector throughput. If
P0NominalPUSCH
is set to a small
value, it is
recommended that
PassLossCoeff be
set to a large value
to ensure higher
data rates for cell
edge users (CEUs).

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Until the cell is
Yes Cell None effect after the cell
activated
is automatically
reset.

The parameter
modification takes
Until the cell is
Yes Cell None effect after the cell
unblocked
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 (3500 is excluded)
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 771 to
779, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
771–779.
The parameter
If the CellRadius
modification takes
Less than 0.1 parameter ranges
Yes Cell effect after the cell
minute from 4300 to 5500
is automatically
(4300 is excluded)
reset.
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 759 to
765, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
759–765.
If the CellRadius
 (3500 is excluded)
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 771 to
779, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
771–779.
The parameter
If the CellRadius
modification takes
Less than 0.1 parameter ranges
Yes Cell effect after the cell
minute from 4300 to 5500
is automatically
(4300 is excluded)
reset.
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 759 to
765, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
759–765.
If the CellRadius
 (3500 is excluded)
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 771 to
779, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
771–779.
The parameter
If the CellRadius
modification takes
Less than 0.1 parameter ranges
Yes Cell effect after the cell
minute from 4300 to 5500
is automatically
(4300 is excluded)
reset.
and the
RootSequenceIdx
parameter ranges
from 255 to 557
and from 759 to
765, the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–557 and
759–765.
If the CellRadius
 parameter ranges
from 4300 to 5500
(4300 is excluded)
and the
RootSequenceIdx
parameter ranges
from 255 to 557 or
from 759 to 765,
the UE access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
The parameter
of 255–557 and
modification takes
Less than 0.1 759–765.
Yes Cell effect after the cell
minute (8) If the CellRadius
is automatically
parameter ranges
reset.
from 5500 to 6800
(5500 is excluded)
and the
RootSequenceIdx
parameter ranges
from 255 to 597
and 747, the UE
access
performance may
deteriorate, and
therefore it is not
recommended that
the
RootSequenceIdx
parameter be set to
a value in the range
of 255–597 and
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
Less than 0.1 modification has no
Yes Cell None
minute impact on the
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The cell should be

No (And no impact
reset to validate the
on the UE in idle N/A N/A None
parameter
mode)
modification.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact modification takes
on the UE in idle N/A N/A None effect after the cell
mode) is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The value
calculated by the
CellRadius
parameter value
minus the
CellRadiusStartLoc
ation parameter
value must be The parameter
greater than 0 and modification takes
Less than 0.1
Yes Cell less than or equal effect after the cell
minute
to 100,000. If the is automatically
CellRadius reset.
parameter is set to
a value greater than
100,000, the
CellRadiusStartLoc
ation parameter can
be set to a value
greater than 0.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
Less than 0.1 modification has no
Yes Cell None
minute impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
Less than 0.1 modification has no
Yes Cell None
minute impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact modification takes
on the UE in idle N/A N/A None effect after the cell
mode) is automatically
reset.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

When setting this

parameter value,
ensure that all cells
established on the
same BBP have the
same rounded-
down value of the
FrameOffset The parameter
parameter value modification takes
Yes Cell 0.1 divided by 8. If the effect after the cell
FrameOffset is automatically
parameter value of reset.
a cell is changed to
produce a different
rounded-down
value than that of
other cells, the cell
cannot be
activated.

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

If this parameter is
set to a non-zero The parameter
No (And no impact
value other than 1, modification has no
on the UE in idle N/A N/A
2, 3, and 4, the impact on the
mode)
parameter value 0 equipment.
takes effect.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The
ULZeroBufZonePR
BOffset parameter The parameter
No (And no impact
value must be less modification has no
on the UE in idle N/A N/A
than the impact on the
mode)
ULZeroBufZonePR equipment.
BThd parameter
value.

The
ULZeroBufZonePR
BOffset parameter The parameter
No (And no impact
value must be less modification has no
on the UE in idle N/A N/A
than the impact on the
mode)
ULZeroBufZonePR equipment.
BThd parameter
value.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
Yes Cell 0.1 minute None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
Less than 0.1 modification has no
Yes Cell None
minute impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 In coverage limited
scenarios, you are
advised to set this
parameter to OFF
to ensure the cell
coverage. In
interference
scenarios, you are
advised to set this
parameter to ON to
increase cell
throughput.
Power decrease is
required when the
system is faulty The parameter
No (And no impact
(such as the modification has no
on the UE in idle N/A N/A
antenna system is impact on the
mode)
faulty, or the RF equipment.
module is
overheated), which
ensures that the RF
module and
intelligent system
try their best to
provide services.
However, the RF
module and
intelligent system
with decreased
power cannot
guarantee the
service quality.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 You are advised to The parameter
No (And no impact
set this parameter modification has no
on the UE in idle N/A N/A
based on the cell impact on the
mode)
coverage. equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The actual value is

equal to the GUI
value divided by The parameter
No (And no impact
100. The default modification has no
on the UE in idle N/A N/A
GUI value is 75, impact on the
mode)
corresponding to an equipment.
actual value of
0.75.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Yes Cell 0.1 None effect after the cell
is automatically
reset.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 You are advised to
set this parameter
based on the
average number of
UEs included in a
paging message on
each paging
occasion in busy
hours and the
average number
increase trend. In
addition, the coding
rate and power
offset used for
sending paging
message must also
be considered. In The parameter
No (And no impact
the scenarios with a modification has no
on the UE in idle N/A N/A
certain coding rate impact on the
mode)
and power offset, equipment.
when the number of
UEs included in a
paging message
reaches the
maximum, the
power and the
number of RBs
required for sending
the paging
message cannot
exceed the total
power of the cell
and the number of
RBs in the
corresponding
bandwidth.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A None N/A

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (For the UE in
idle mode, The parameter
modifications on modification has no
N/A N/A None
this parameter impact on the
would affect cell equipment.
reselection.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (For the UE in
idle mode, The parameter
modifications on modification has no
N/A N/A None
this parameter impact on the
would affect cell equipment.
reselection.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (For the UE in
idle mode, The parameter
modifications on modification has no
N/A N/A None
this parameter impact on the
would affect cell equipment.
reselection.)

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 If all of an external
GERAN cell, and
the BSC and MSC
serving this GERAN
cell support ultra- The parameter
No (And no impact
flash CSFB to modification has no
on the UE in idle N/A N/A
GERAN, set this impact on the
mode)
parameter to equipment.
BOOLEAN_TRUE.
If not, set this
parameter to
BOOLEAN_FALSE.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

If the CtrlMode
parameter in the
GeranNcell MO is
set to
MANUAL_MODE,
N/A N/A N/A the measurement N/A
priorities of
neighboring
GERAN cells will
not be automatically
changed.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

No (Modifications
The parameter
on this parameter
modification has no
would affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)
No (Modifications
The parameter
on this parameter
modification has no
will affect cell N/A N/A None
impact on the
reselection of the
equipment.
UE in idle mode.)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)

No (And no impact
on the UE in idle N/A N/A N/A N/A
mode)
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 If the CtrlMode
parameter in the
UtranNCell MO is
set to
MANUAL_MODE,
N/A N/A N/A the measurement N/A
priorities of
neighboring UTRAN
cells will not be
automatically
changed.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

No (And no impact
on the UE in idle N/A N/A None N/A
mode)
N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

1.The
BbpCollaborateBloc
kTimer parameter
needs to be set
only when the
BlockPriority
parameter is set to
MIDDLE_PRIORIT
Y_BLOCK(Middle
Priority Block).
2.The LTE
baseband
collaboration group
is blocked
immediately when it
is detected that no
UEs are transferred
The parameter
No (And no impact from LBBPc boards
modification has no
on the UE in idle N/A N/A to UBBPd boards,
impact on the
mode) even if the timer
equipment.
specified by the
BbpCollaborateBloc
kTimer parameter
has not expired.
3.When the timer
specified by the
BbpCollaborateBloc
kTimer parameter
expires, all UEs
transferred from
LBBPc boards to
UBBPd boards are
immediately
released, and then
the LTE baseband
collaboration group
is blocked.
 is not specified and
the eNodeB
determines whether
to enable LTE
baseband
collaboration group
based on the board
status dynamically
measured during
eNodeB operation.
2.The
BbpCollaborateTrig
gerThd parameter
is used to test the
LTE baseband
collaboration
function. If this
parameter is set to The parameter
No (And no impact
a non-default value, modification has no
on the UE in idle N/A N/A
this function may impact on the
mode)
produce zero gains. equipment.
For example, the
load increases, but
throughput and the
number of UEs to
be scheduled in
each TTI do not
increase. You are
advised not to
manually set this
parameter.
3.If you set this
parameter
manually, you must
also set the
BbpCollaborateCle
arThd parameter,
and ensure that the
 is not specified and
the eNodeB
determines whether
to disable LTE
baseband
collaboration group
based on the board
status dynamically
measured during
eNodeB operation.
2.The
BbpCollaborateTrig
gerThd parameter
is used to test the
LTE baseband
collaboration
function. If this
parameter is set to The parameter
No (And no impact
a non-default value, modification has no
on the UE in idle N/A N/A
this function may impact on the
mode)
produce zero gains. equipment.
For example, the
load increases, but
throughput and the
number of UEs to
be scheduled in
each TTI do not
increase. You are
advised not to
manually set this
parameter.
3.If you set this
parameter
manually, you must
also set the
BbpCollaborateTrig
gerThd parameter,
and ensure that the

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The board should
be reset to validate
N/A N/A N/A None
the parameter
modification.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

This command
The parameter
affects all cells
Less than 0.1 modification has no
Yes established on None
minute impact on the
LBBPd3 boards in
equipment.
the eNodeB.
 The parameter
All SFN cells in the modification has no
Yes Less than 1 minute None
eNodeB impact on the
equipment.

The parameter
modification takes
All cells served by Less than 0.1
Yes None effect after the cell
the eNodeB minute
is automatically
reset.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A None N/A

N/A N/A N/A None N/A

 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
modification has no
Yes Cell Less than 1 minute None
impact on the
equipment.

The parameter
modification has no
Yes Cell Less than 1 minute None
impact on the
equipment.

The parameter
modification has no
Yes Cell Less than 1 minute None
impact on the
equipment.

The parameter
modification has no
Yes Cell Less than 1 minute None
impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

N/A N/A N/A None N/A

N/A N/A N/A N/A N/A

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.
 The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

The parameter
modification has no
N/A N/A N/A None
impact on the
equipment.

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

No (And no impact
on the UE in idle N/A N/A None N/A
mode)

No (And no impact
on the UE in idle N/A N/A None N/A
mode)
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

N/A N/A N/A None N/A

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
modification takes
Less than 0.1
Yes Cell None effect after the cell
minute
is automatically
reset.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
Less than 0.1 modification has no
Yes Cell None
minute impact on the
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

If
AutoPowerOffSwitc
The parameter
h is set to ON,
modification has no
Yes eNodeB services are None
impact on the
interrupted from
equipment.
PowerOffTime to
PowerOnTime.

If
AutoPowerOffSwitc
The parameter
h is set to ON,
modification has no
Yes eNodeB services are None
impact on the
interrupted from
equipment.
PowerOffTime to
PowerOnTime.
 If
AutoPowerOffSwitc
The parameter
h is set to ON,
modification has no
Yes eNodeB services are None
impact on the
interrupted from
equipment.
PowerOffTime to
PowerOnTime.

N/A N/A N/A N/A N/A

 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
 The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.

The parameter
No (And no impact
modification has no
on the UE in idle N/A N/A None
impact on the
mode)
equipment.
Impact on Radio
Introduced in
Network Attribute Applicable Mode
Version...
Performance
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

Only the
ServiceHoBearerPo
licy parameter for
QCIs 1 and 2 can
be set to
SERVICE_HO_QCI BTS3900:
_NOT_ALLOWED. V100R009C00
If the BTS3900 LTE: Radio L
ServiceHoBearerPo V100R009C00
licy parameter for
other QCIs is set to
SERVICE_HO_QCI
_NOT_ALLOWED,
UE default bearers
are removed.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

If this parameter is
set to ON, the
eNodeB selects the
target frequency
from frequencies
with the same
priorities in an RR
BTS3900:
manner and
V100R010C10
therefore load
BTS3900 LTE: Radio L
balancing between
V100R010C10
different UTRAN
cells can be
achieved. If this
parameter is set to
OFF, the load of
cells on some
UTRA frequencies
increases.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
If this parameter is
set to OFF, CSFB
users are admitted
based on ARPs
sent by the EPC
and therefore radio
network
performance is not
affected. If this
BTS3900:
parameter is set to
V100R009C00
ON, ARPs for CSFB
BTS3900 LTE: Radio L
users with non-
V100R009C00
emergency calls
can be configured
and these users are
admitted based on
configured ARPs. In
this case, a user
with a higher ARP
has a higher
admission success
rate.

A smaller value of
this parameter
leads to a higher
ARP for CSFB
users with non-
emergency calls
and therefore a
higher admission BTS3900:
success rate for V100R009C00
these users. This, BTS3900 LTE: Radio L
however, may lead V100R009C00
to call drops of
other low-priority
users. A greater
value leads to the
opposite affects
and has less affect
on other low-priority
users.

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R010C10
None. BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
The same
parameter settings
are recommended
for QCI 5 and the
related QCIs. The
reason is that a
bearer with a QCI
of 5 carries IMS
signaling and IMS
signaling is usually BTS3900:
associated with V100R008C00
other services. BTS3900 LTE: Radio L
Handovers are not V100R005C00
recommended for
the QCI of a default
bearer. If the QCI of
the default bearer is
configured to allow
handovers, the UE
is handed over
immediately after
accessing the
network.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

A large value of this

parameter results in
prolonged waiting
time. A small value
of this parameter
causes that BTS3900:
measurements for V100R009C00
service- or service BTS3900 LTE: Radio L
request-based V100R009C00
inter-frequency
handover stops
before the
measurement is
completed or
reported.
A large value of this
parameter causes
that a UE is difficult
to be handed over
to an inter-
BTS3900:
frequency cell. A
V100R009C00
small value of this
BTS3900 LTE: Radio L
parameter enables
V100R009C00
a UE to be easily
handed over to an
inter-frequency cell
and causes
increased handover
times.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
If this parameter is
set to
SERVIC_IR_MEAS
_NO_ORDER, the
UE bearers change,
and the priority of
the UE being
handed over to an
inter-frequency
network is the same
BTS3900:
as that of the UE
V100R009C00
being handed over
BTS3900 LTE: Radio L
to an inter-RAT
V100R009C00
network.
If this parameter is
set to
SERVIC_IR_MEAS
_ORDER, the UE
bearers change,
and the UE is
handed over to an
inter-frequency
network
preferentially.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

handovers.
If the
SiByRimCapCfg
option is
deselected, the
eNodeB cannot use
RIM to obtain the
system information
of neighboring
UTRAN cells and
therefore cannot
perform fast
redirection.
If the VoipCapCfg
option is selected,
voice services
established in the
BTS3900:
LTE network can be
V100R008C01
transferred to the
BTS3900 LTE: Radio L
UTRAN cell by
V100R008C01
means of PS
handover for UEs to
perform voice
services in the
UTRAN cell.
If the VoipCapCfg
option is
deselected, VoIP is
not supported in
UTRAN. VoIP
services
established in the
LTE network cannot
be transferred to
the UTRAN using
PS handovers but
can be transferred
to the CS domain of BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
small-data-volume
services, such as
signaling, voice
services, and high-
priority OM
messages. WFQ
bearers are
scheduled in round
robin (RR) mode
and allocated
resources based on
the value of
UlSchWeight or
DlSchWeight. This
type of bearer
applies to common
services. BTS3900:
Appropriate V100R010C00
mapping between a BTS3900 LTE: Radio L
service type and V100R010C00
the scheduling type
of bearers carrying
this type of service
helps meet the QoS
requirement of this
type of service. If
the scheduling type
is inappropriate for
the service type (for
example, common
services are carried
on PQ bearers),
common services
are preferentially
scheduled and
allocated resources
but the bandwidth
This parameter
affects the RB
resource allocation
proportion between
multiple WFQ
bearers on an RRN.
When this RRN is
scheduled and
allocated RB
resources and data
BTS3900:
transmission is
V100R010C00
required for multiple
BTS3900 LTE: Radio L
WFQ bearers on
V100R010C00
this RRN, the WFQ
bearer configured
with a larger value
of this parameter
can obtain more RB
resources, data
transmission delay
is shorter on this
bearer, and service
quality on this
bearer is better.

This parameter
affects the RB
resource allocation
proportion between
multiple WFQ
bearers on an RRN.
When this RRN is
scheduled and
allocated RB
resources and data
BTS3900:
transmission is
V100R010C00
required for multiple
BTS3900 LTE: Radio L
WFQ bearers on
V100R010C00
this RRN, the WFQ
bearer configured
with a larger value
of this parameter
can obtain more RB
resources, data
transmission delay
is shorter on this
bearer, and service
quality on this
bearer is better.
This parameter
determines SDF
classifications and
BTS3900:
mapping between
V100R010C00
packet types and E-
BTS3900 LTE: Radio L
RABs, and
V100R010C00
therefore
determines the QoS
for each type of
packet.
This parameter
determines SDF
classifications and
BTS3900:
mapping between
V100R010C00
packet types and E-
BTS3900 LTE: Radio L
RABs, and
V100R010C00
therefore
determines the QoS
for each type of
packet.

A large value of this

parameter leads to
a larger
preallocation weight
for services with the
corresponding
extended QCI and
BTS3900:
shorter
V100R010C00
preallocation delay.
BTS3900 LTE: Radio L
A smaller value of
V100R010C00
this parameter
leads to a smaller
preallocation weight
for services with the
corresponding
extended QCI and
longer preallocation
delay.
This parameter
helps decrease the
number of ANR
intra-frequency
measurement
reports and invalid
decisions on
triggering ANR-
based intra-
frequency
measurements. A
large value of this BTS3900:
parameter leads to V100R009C00
less invalid BTS3900 LTE: Radio L
decisions and a low V100R009C00
probability of
adding unknown
target neighboring
cells before
coverage-based
intra-frequency
handovers are
triggered. As a
result, the intra-
frequency handover
delay cannot be
greatly decreased.
A large value of this
parameter leads to
difficult triggering of
ANR-based intra-
frequency
measurement
reports, a
decreased number
of invalid decisions
on triggering intra-
frequency ANR,
and a low
probability of
adding unknown
target neighboring
cells before
BTS3900:
coverage-based
V100R009C00
inter-frequency
BTS3900 LTE: Radio L
handovers are
V100R009C00
triggered. As a
result, the intra-
frequency handover
delay cannot be
greatly decreased.
A small value of this
parameter leads to
easy triggering of
ANR-based intra-
frequency
measurement
reports and a high
probability of
adding redundant
intra-frequency
neighboring cells
based on ANR.

A large value of this

parameter leads to
difficult triggering of
ANR-based intra-
frequency
measurement
reports and a
decreased number
of invalid decisions
BTS3900:
of triggering intra-
V100R009C00
frequency ANR. A
BTS3900 LTE: Radio L
small value of this
V100R009C00
parameter leads to
easy triggering of
ANR-based intra-
frequency
measurement
reports and a high
probability of
adding redundant
neighboring cells
based on ANR.
A large value of this
parameter can
effectively decrease
the number of ANR
inter-frequency
measurement
reports and invalid
decisions on
triggering inter-
frequency ANR.
However, the
probability of
adding unknown
target neighboring
cells before
coverage-based BTS3900:
inter-frequency V100R009C00
handovers are BTS3900 LTE: Radio L
triggered is low. As V100R009C00
a result, the inter-
frequency handover
delay cannot be
greatly decreased.
A small value of this
parameter
increases the
probability of
triggering the ANR-
based inter-
frequency
measurement
report and adding
redundant
neighboring cells
based on ANR.
A large value of this
parameter leads to
difficult triggering of
ANR-based inter-
frequency
measurement
reports, a
decreased number
of invalid decisions
on triggering inter-
frequency ANR,
and a low
probability of
adding unknown
target neighboring
cells before
BTS3900:
coverage-based
V100R009C00
inter-frequency
BTS3900 LTE: Radio L
handovers are
V100R009C00
triggered. As a
result, the inter-
frequency handover
delay cannot be
greatly decreased.
A small value of this
parameter leads to
easy triggering of
ANR-based inter-
frequency
measurement
reports and a high
probability of
adding redundant
inter-frequency
neighboring cells
based on ANR.
A large value of this
parameter leads to
difficult triggering of
ANR-based inter-
frequency
measurement
reports, a
decreased number
of invalid decisions
on triggering inter-
frequency ANR,
and a low
probability of
adding unknown
target neighboring
cells before
BTS3900:
coverage-based
V100R009C00
inter-frequency
BTS3900 LTE: Radio L
handovers are
V100R009C00
triggered. As a
result, the inter-
frequency handover
delay cannot be
greatly decreased.
A small value of this
parameter leads to
easy triggering of
ANR-based inter-
frequency
measurement
reports and a high
probability of
adding redundant
inter-frequency
neighboring cells
based on ANR.

If the values of
CounterCheckTimer
and
CounterCheckCoun
tNum are too small,
the counter check
procedures are
performed too
frequently, which BTS3900:
wastes radio V100R008C00
interface resources. BTS3900 LTE: Radio L
If the values are too V100R001C01
large, the counter
check procedure
fails to be initiated
during a long time,
which results in the
failure to check the
HFN on the UE side
and that on the
eNodeB side.
If the values of
CounterCheckTimer
and
CounterCheckCoun
tNum are too small,
the counter check
procedures are
performed too
frequently, which BTS3900:
wastes radio V100R008C00
interface resources. BTS3900 LTE: Radio L
If the values are too V100R001C01
large, the counter
check procedure
fails to be initiated
during a long time,
which causes the
failure to check the
HFN on the UE side
and that on the
eNodeB side.

If this switch is set

to ON, a DRB is
released when the
counter check
detects an
BTS3900:
unexpected result
V100R008C00
in the DRB. If this
BTS3900 LTE: Radio L
switch is set to OFF,
V100R001C01
a DRB is not
released even if the
counter check
detects an
unexpected result
in the DRB.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
The setting of this
parameter affects
how long the
eNodeB will wait for
a response
message from the
MME. If this
parameter is set to
a small value, the
eNodeB waits for a
period shorter than
the transmission
time required by a
response message BTS3900:
from the MME. If V100R008C00
this parameter is BTS3900 LTE: Radio L
set to a large value, V100R005C00
the eNodeB
continues waiting
for a response
message from the
MME when it
cannot receive the
response message
due to a fault. As a
result, resources
are wasted. To
prevent this, you
are advised to
retain the default
value.
The setting of this
parameter affects
how long the
eNodeB will wait for
a response
message over the
X2 interface from a
peer eNodeB. If this
parameter is set to
a small value, the
eNodeB waits for a
period shorter than
the transmission
time required by a
response message BTS3900:
from the peer V100R008C00
eNodeB. If this BTS3900 LTE: Radio L
parameter is set to V100R005C00
a large value, the
eNodeB continues
waiting for a
response message
from the peer
eNodeB when it
cannot receive the
response message
due to a fault. As a
result, resources
are wasted. To
prevent this, you
are advised to
retain the default
value.
The setting of this
parameter affects
how long the
eNodeB will wait for
a response
message from the
UE. If this
parameter is set to
a small value, the
eNodeB waits for a
period shorter than
the transmission
time required by a
BTS3900:
response message
V100R008C00
from the UE. If this
BTS3900 LTE: Radio L
parameter is set to
V100R005C00
a large value, the
eNodeB continues
waiting for a
response message
from the UE when it
cannot receive the
response message
due to a fault. As a
result, resources
are wasted. To
prevent this, you
are advised to
retain the default
value.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

If the channel
quality is poor for a
UE, the RRC
Connection Setup
Complete message
will be fragmented.
If the number of BTS3900:
fragments is large, V100R008C00
it takes a long time BTS3900 LTE: Radio L
to transmit all the V100R008C00
segments. In this
situation, this timer
can be set to a
large value to
increase the RRC
connection setup
success rate.

impact on how long

the eNodeB will
wait for a Security
Mode Complete
message from the
UE.If this parameter
is set to a small
value, the eNodeB
waits for a period
shorter than the
transmission time
required by a
Security Mode
Complete message
from the UE.If this
parameter is set to
a large value, the BTS3900:
eNodeB continues V100R008C00
waiting for a BTS3900 LTE: Radio L
Security Mode V100R008C00
Complete message
from the UE when it
cannot receive the
message due to a
fault. As a result,
resources are
wasted.If this
parameter is set to
a large value, the
eNodeB continues
waiting for a
Security Mode
Complete message
from the UE when it
cannot receive the
message due to a
fault. As a result,
The setting of this
parameter has an
impact on how long
the eNodeB will
wait for a UE
Capability
Information
message from the
UE in non-security
mode. If this
parameter is set to
a small value, the
eNodeB waits for a
period shorter than
the transmission
time required by a BTS3900:
UE Capability V100R008C00
Information BTS3900 LTE: Radio L
message from the V100R008C00
UE.If this parameter
is set to a large
value, the eNodeB
continues waiting
for a UE Capability
Information
message from the
UE when it cannot
receive the
message due to a
fault. As a result,
resources are
wasted.To prevent
this, you are
advised to retain
the default value.

If this parameter is
set to a too large
value, the user-
plane interruption
duration is large BTS3900:
during a handover V100R008C00
in scenarios with no BTS3900 LTE: Radio L
forwarded packets. V100R008C00
If this parameter is
set to a too small
value, downlink
forwarded packets
will be discarded.
If this parameter is
set to a too large
value, the user-
plane interruption
duration is large BTS3900:
during a handover V100R008C00
in scenarios with no BTS3900 LTE: Radio L
endmarker packets. V100R008C00
If this parameter is
set to a too small
value, downlink
forwarded packets
will be discarded.
rate. A larger value
of this parameter
results in a smaller
service drop rate.
However, a larger
value of this
parameter
negatively affects
the user experience
of VoLTE UEs. The
default value of this
parameter is the
same as the
S1MessageWaiting
Timer parameter.
Set this parameter
as customers' BTS3900:
requirements on the V100R010C00
live network. BTS3900 LTE: Radio L
A larger value of V100R010C00
this parameter
results in a lower
probability of
service drops due
to air interface
exceptions for
VoLTE UEs, a
longer timer of
period that UEs can
stay in weak
coverage areas or
coverage holes,
and a longer time of
period of allowing
VoLTE service
interruption.
A smaller value of
A larger value of
this parameter
results in a lower
probability of
service drop due to
air interface
exceptions for
VoLTE UEs during
handovers, a longer BTS3900:
timer of period that V100R010C00
UEs can stay in BTS3900 LTE: Radio L
weak coverage V100R010C00
areas or coverage
holes, and a longer
time of period of
allowing VoLTE
service interruption.
A smaller value of
this parameter
results in the
opposite effects.

A larger value of
this parameter
results in a lower
probability of
service drop due to
air interface
exceptions for
VoLTE UEs during
handovers, a longer BTS3900:
timer of period that V100R010C00
UEs can stay in BTS3900 LTE: Radio L
weak coverage V100R010C00
areas or coverage
holes, and a longer
time of period of
allowing VoLTE
service interruption.
A smaller value of
this parameter
results in the
opposite effects.
A smaller value of
this parameter
results in a lower
probability for
determining that a
bear continuously
has no data
transmission, a
higher probability
for determining that
a bearer is
deactivated when BTS3900:
the bearer is V100R010C10
released, and BTS3900 LTE: Radio L
smaller values of V100R010C10
counters, such as
the number of
abnormal releases
of active E-RABs
and number of
abnormal releases
of active UE
contexts. A larger
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

According to 3GPP
TS 33.401,
eNodeBs should
support prohibition
of the null
algorithm. When BTS3900:
the null algorithm is V100R008C00
prohibited, UEs that BTS3900 LTE: Radio L
do not support V100R008C00
integrity protection
cannot access the
network even if a
UE attempts to
initiate an
emergency call.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

If UEs are treated

as UEs running
unlimited services
(US UEs), KPIs of
the US UEs related
to throughput, BTS3900:
latency, and data V100R010C00
rate improve. KPIs BTS3900 LTE: Radio L
of common UEs V100R010C00
may deteriorate
because the
resource priorities
of the common UEs
become relatively
lower.

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
A smaller value of
this parameter
results in earlier
RRC connection
releases for UEs
without performing
services, more
frequent RRC
connection setup
requests, and better
KPIs such as the
service drop rate
due to more normal
RRC connection
BTS3900:
releases. A larger
V100R010C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C00
later RRC
connection releases
for UEs without
performing
services, longer
online duration in
which radio
resources are
occupied, and
worse KPIs such as
the service drop
rate due to fewer
normal RRC
connection
releases.

A smaller value of
this parameter
results in more
frequent downlink
packet parsing.
Therefore, the
eNodeB can detect
UEs running
BTS3900:
unlimited services
V100R010C00
more quickly.
BTS3900 LTE: Radio L
However, a smaller
V100R010C00
value of this
parameter results in
a higher load of the
baseband
processing unit. A
larger value of this
parameter results in
the opposite
effects.
This parameter is
used to adjust the
DL scheduling
priorities for UEs
running unlimited
services when the
services assurance
BTS3900:
for UEs running
V100R010C00
unlimited services is
BTS3900 LTE: Radio L
enabled. A smaller
V100R010C00
value of this
parameter results in
a smaller downlink
bandwidth allocated
for such UEs. A
larger value of this
parameter results in
the opposite effect.

A smaller value of
this parameter
results in less uplink
bandwidth to be
allocated to large-
packet services of
UEs running BTS3900:
unlimited services V100R010C00
when the uplink BTS3900 LTE: Radio L
transport bandwidth V100R010C00
or uplink licensed
traffic volume is
limited. A larger
value of this
parameter results in
the opposite
effects.

A smaller value of
this parameter
results in less uplink
bandwidth to be
allocated to small-
packet services of
UEs running BTS3900:
unlimited services V100R010C00
when the uplink BTS3900 LTE: Radio L
transport bandwidth V100R010C00
or uplink licensed
traffic volume is
limited. A larger
value of this
parameter results in
the opposite
effects.
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

If this parameter is
set to ON, ROHC is
enabled to reduce
BTS3900:
header overhead of
V100R008C00
data packets over
BTS3900 LTE: Radio L
the air interface,
V100R003C00
improving the
capacity and the
coverage of VoIP
services.

The setting of this

parameter affects
uplink ROHC
reliability, uplink
compression
efficiency, and
downlink feedback
overhead as
follows: (1)
R_MODE and
O_MODE provide
higher uplink ROHC BTS3900:
reliability than V100R008C00
U_MODE. (2) BTS3900 LTE: Radio L
R_MODE and V100R001C01
O_MODE provide
higher uplink
compression
efficiency than
U_MODE. (3)
R_MODE results in
greater downlink
feedback
overheads than
O_MODE, and
U_MODE does not
have feedback.
The setting of this
parameter affects
supported protocol
type. Each profile
supports one type
of headers.
For headers with an
unsupported type,
profile 0x0000 BTS3900:
applies. That is, V100R008C00
headers are not BTS3900 LTE: Radio L
compressed and V100R001C01
are added with
profile 0x0000
ROHC headers.
This increases the
transmission
overhead over the
air interface and
reduces the ROHC
gain.

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

If this parameter is
set to a small value,
the eNodeB rejects
access of the UE
again for the same BTS3900:
reason. If this V100R008C00
parameter is set to BTS3900 LTE: Radio L
a large value, the V100R001C00
UE cannot access
the network for a
long period of time,
which affects user
experience.
After T320 expires,
the dedicated
priorities indicated
in the
RRCConnectionRel
ease message
become invalid, and
the dedicated
priorities indicated
in the system
information take
effect. As the
dedicated priorities
in the system
information are BTS3900:
optional, frequency V100R008C00
prioritization can be BTS3900 LTE: Radio L
better guaranteed V100R002C00
during cell
reselection if the
dedicated priorities
in the
RRCConnectionRel
ease message are
used. If the value of
this parameter is
too large, the
dedicated priorities
cannot be updated
in a timely manner
at the UE when
priority values
change.

If the UE does not

complete an intra-
RAT handover
before this timer
BTS3900:
expires, the UE
V100R008C00
reverts back to the
BTS3900 LTE: Radio L
associated
V100R001C00
configuration and
initiates an RRC
connection
reestablishment
procedure.
If the UE does not
complete an inter-
RAT handover to
GERAN before this
BTS3900:
timer expires, the
V100R008C00
UE reverts back to
BTS3900 LTE: Radio L
the associated
V100R001C00
configuration and
initiates an RRC
connection re-
establishment
procedure.

After T320 expires,

the dedicated
priorities indicated
in the
RRCConnectionRel
ease message
become invalid, and
the absolute
priorities indicated
in the system
information take
effect. As the
absolute priorities in
the system BTS3900:
information are V100R008C00
optional, frequency BTS3900 LTE: Radio L
prioritization can be V100R002C00
better guaranteed
during cell
reselection if the
dedicated priorities
are used. If the
value of this
parameter is too
large, cell
reselection
parameters cannot
be updated in time
at the UE when
priority values
change.
A smaller value of
this parameter
results in earlier
RRC connection
releases for UEs
without performing
services, more
frequent RRC
connection setup
requests, and better
KPIs such as the
service drop rate
due to more normal
RRC connection
BTS3900:
releases. A larger
V100R008C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R001C00
later RRC
connection releases
for UEs without
performing
services, longer
online duration in
which radio
resources are
occupied, and
worse KPIs such as
the service drop
rate due to fewer
normal RRC
connection
releases.
A smaller value of
this parameter
results in a higher
probability that UEs
enter the out-of-
synchronization
state when they
should not and,
therefore, a larger
number of random
access procedures
triggered for
maintaining uplink
synchronization and BTS3900:
more occupied V100R008C00
resources for BTS3900 LTE: Radio L
random access. A V100R005C00
larger value of this
parameter results in
fewer prompt
changes of UE
status from uplink-
synchronized to
out-of-
synchronization,
more power
consumption of
UEs, and more
occupied PUCCH
and SRS
resources.

After the eNodeB

receives the first
RRC Connection
Request message,
if the eNodeB
receives more RRC
Connection
Request messages
within the length of BTS3900:
T300 plus V100R008C00
FilterReptRrcConn BTS3900 LTE: Radio L
ReqTimer, the V100R008C00
eNodeB considers
that these
messages are sent
for one RRC
connection request
and the
L.RRC.ConnReq.At
t counter increases
only by one.
A smaller value of
this parameter
results in earlier
RRC connection
releases for UEs
without performing
services, more
frequent RRC
connection setup
requests, and better
KPIs such as the
service drop rate
due to more normal
RRC connection
BTS3900:
releases. A larger
V100R008C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R008C00
later RRC
connection releases
for UEs without
performing
services, longer
online duration in
which radio
resources are
occupied, and
worse KPIs such as
the service drop
rate due to fewer
normal RRC
connection
releases.
A smaller value of
this parameter
results in a higher
probability that UEs
enter the out-of-
synchronization
state when they
should not and,
therefore, a larger
number of random
access procedures
triggered for
maintaining uplink
synchronization and BTS3900:
more occupied V100R008C00
resources for BTS3900 LTE: Radio L
random access. V100R008C00
A larger value of
this parameter
results in less
prompt changes of
UE status from
uplink-synchronized
to out-of-
synchronization,
more power
consumption of
UEs, and more
occupied PUCCH
and SRS
resources.
A smaller value of
this parameter
results in earlier
RRC connection
releases for UEs
without performing
services, more
frequent RRC
connection setup
requests, and better
KPIs such as the
service drop rate
due to more normal
RRC connection
BTS3900:
releases. A larger
V100R010C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C00
later RRC
connection releases
for UEs without
performing
services, longer
online duration in
which radio
resources are
occupied, and
worse KPIs such as
the service drop
rate due to fewer
normal RRC
connection
releases.
If this parameter is
set to ON, the SRB
polling PDU
retransmission
timer for the
eNodeB can be
adaptively adjusted,
decreasing the
number of
retransmissions and
saving the air
interface resources.
If this parameter is
set to OFF, the
timer cannot be
BTS3900:
adaptively adjusted.
V100R010C10
In this case, when
BTS3900 LTE: Radio L
the number of UEs
V100R010C10
is growing, the UE
scheduling interval
in the uplink
increases, causing
excessive invalid
downlink RLC
retransmissions.
When the number
of RLC
retransmissions
reaches its
maximum value, the
probability of RRC
connection
reestablishment
increases.

A smaller value of
this parameter
results in a smaller
adjustment step BTS3900:
and less frequent V100R010C10
adaptation of uplink BTS3900 LTE: Radio L
scheduling interval. V100R010C10
A larger value of
this parameter
results in the
opposite effects.
In heavy-traffic
scenarios, if this
parameter is set to
a small value, the
timer adjustment
range is small and
the decrease in the BTS3900:
number of V100R010C10
retransmissions due BTS3900 LTE: Radio L
to the timer V100R010C10
expiration becomes
slow. If this
parameter is set to
a large value, the
uplink status report
may not be sent in
a timely manner.
triggering the
adaptive
adjustment of the
SRB polling PDU
retransmission
timer for the
eNodeB when the
number of UEs in
the cell is growing.
In this case, the
timer length applied
to UEs may be
shorter than the
actual UE
scheduling interval,
and the decrease in
the number of SRB BTS3900:
RLC V100R010C10
retransmissions BTS3900 LTE: Radio L
becomes slower. V100R010C10
If this parameter is
set to a too small
value, there is a
high probability of
triggering the
adaptive
adjustment of the
SRB polling PDU
retransmission
timer for the
eNodeB when the
number of UEs in
the cell is growing.
In this case, when
UE packets are lost
due to poor channel
quality, RLC
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

If
ArpPrioritySchSwitc
h is set to 1,
services with higher
ARP and QCI
priorities have a BTS3900:
heavier scheduling V100R010C10
weight and larger BTS3900 LTE: Radio L
throughput. V100R010C10
If
ArpPrioritySchSwitc
h is set to 0, the
network
performance is not
affected.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A smaller value of
this parameter
results in smaller
uplink bandwidth to
be allocated to
services with the BTS3900:
QCI when the V100R010C10
uplink transport BTS3900 LTE: Radio L
bandwidth or uplink V100R010C10
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a higher
downlink
scheduling priority
for services with the BTS3900:
QCI and also a V100R010C10
higher priority with BTS3900 LTE: Radio L
which the data rate V100R010C10
for these services is
guaranteed. A
smaller value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in smaller
uplink bandwidth to
be allocated to
services with the BTS3900:
QCI when the V100R010C10
uplink transport BTS3900 LTE: Radio L
bandwidth or uplink V100R010C10
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a higher
downlink
scheduling priority
for services with the BTS3900:
QCI and also a V100R010C10
higher priority with BTS3900 LTE: Radio L
which the data rate V100R010C10
for these services is
guaranteed. A
smaller value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in smaller
uplink bandwidth to
be allocated to
services with the BTS3900:
QCI when the V100R010C10
uplink transport BTS3900 LTE: Radio L
bandwidth or uplink V100R010C10
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a higher
downlink
scheduling priority
for services with the BTS3900:
QCI and also a V100R010C10
higher priority with BTS3900 LTE: Radio L
which the data rate V100R010C10
for these services is
guaranteed. A
smaller value of this
parameter results in
the opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

can be deactivated
based on the traffic
volume of the CA
UE or the channel
quality of the SCell.
This can save the
UE power
consumption when
the UE performs no
service or a few
services. When the
channel quality of
the SCell is poor,
the eNodeB
deactivates the
SCell for the CA UE
to prevent an SCell BTS3900:
throughput V100R008C00
decrease due to BTS3900 LTE: Radio L
scheduling on the V100R008C00
SCell. If this
parameter is set to
OFF, the SCell is
always active after
being activated,
unless an RLF is
detected on the
SCell. In this case,
a CA UE can use
the SCell when the
traffic volume is
large. However, the
SCell throughput
decreases if the
eNodeB performs
scheduling on the
SCell with poor
If this parameter is
set to a large value,
a CA UE can
activate an SCell
when its buffered
BTS3900:
data on the eNodeB
V100R008C00
is large. If this
BTS3900 LTE: Radio L
parameter is set to
V100R008C00
a small value, a CA
UE can activate an
SCell when its
buffered data on
the eNodeB is
small.

If this parameter is
set to a large value,
a CA UE can
deactivate an SCell
when its buffered
BTS3900:
data on the eNodeB
V100R008C00
is large. If this
BTS3900 LTE: Radio L
parameter is set to
V100R008C00
a small value, a CA
UE can deactivate
an SCell when its
buffered data on
the eNodeB is
small.
If this parameter is
set to a large value,
a CA UE can
activate an SCell
when its buffer
BTS3900:
delay on the
V100R008C00
eNodeB is large. If
BTS3900 LTE: Radio L
this parameter is
V100R008C00
set to a small value,
a CA UE can
activate an SCell
when its buffer
delay on the
eNodeB is small.

If this parameter is
set to a large value,
a CA UE can
deactivate an SCell BTS3900:
when its throughput V100R008C00
is large. If this BTS3900 LTE: Radio L
parameter is set to V100R008C00
a small value, a CA
UE can deactivate
an SCell when its
throughput is small.
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
consumption.
However, if this
parameter is set to
a large value, the
eNodeB can
monitor the radio
signal condition of
the SCell's intra-
frequency
neighboring cells.
When the signal
quality in the SCell
is poor, the eNodeB
can change the
SCell in a timely
manner to prevent
a decrease in the
BTS3900:
SCell transmission
V100R009C00
efficiency. The
BTS3900 LTE: Radio L
smaller the value,
V100R009C00
the lower the UE
power
consumption.
However, if this
parameter is set to
a small value, the
eNodeB may not
know the radio
signal condition of
the SCell's intra-
frequency
neighboring cells.
When the signal
quality in the SCell
is poor, the eNodeB
may not change the
SCell in a timely
manner, so the
consumption is.
However, if this
parameter is set to
a large value, the
eNodeB may not
know the radio
signal condition of
the SCell's intra-
frequency
neighboring cells.
When the signal
quality in the SCell
is poor, the eNodeB
may not change the
SCell in a timely
manner, so the
SCell transmission BTS3900:
efficiency V100R009C00
decreases. The BTS3900 LTE: Radio L
smaller the value is, V100R009C00
the more frequently
the UE sends A6
measurement
reports, and the
higher the UE
power consumption
is. However, if this
parameter is set to
a small value, the
eNodeB can
monitor the radio
signal condition of
the SCell's intra-
frequency
neighboring cells.
When the signal
quality in the SCell
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
results in more
frequent SCell
configurations and
more RRC
Connection
Reconfiguration
messages
transmitted to
configure SCells. In
addition, it leads to
a greater decrease
in cell throughput if
the eNodeB
configures SCells
based on A4
measurements and
the UE requires
BTS3900:
inter-frequency
V100R009C00
measurement gaps.
BTS3900 LTE: Radio L
A larger value
V100R009C00
results in less
frequent SCell
configurations and
fewer RRC
Connection
Reconfiguration
messages
transmitted to
configure SCells. In
addition, it leads to
a smaller decrease
in cell throughput if
the eNodeB
configures SCells
based on A4
measurements and
the UE requires
inter-frequency
uplink 2CC CA can
reach a higher
uplink peak data
rate only if this
option is selected.
CaDl4CCSwitch:
UEs that support
downlink 4CC CA
can reach a higher
downlink peak data
rate only if this
option is selected.
InterFddTddCaSwit
ch: UEs that
support downlink
FDD+TDD CA can
reach a higher
BTS3900:
downlink peak data
V100R010C00
rate only if this
BTS3900 LTE: Radio L
option is selected.
V100R010C00
Tdd2CCDlCaEnhan
ceSwitch: If this
option is selected,
DL ACK
demodulation is
enhanced,
increasing the
downlink
throughput of UEs
using CA. Using
PUCCH format 3
increases the UE
transmit power,
affecting uplink UE
throughput. If this
option is
deselected, PUCCH
format 1b with
A smaller value of
this parameter
results in a larger
probability that the BTS3900:
SCell activation V100R010C00
procedure is BTS3900 LTE: Radio L
triggered by uplink V100R010C00
services. A larger
value of this
parameter results in
a lower probability.
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
A smaller value of
this parameter
indicates a shorter
sampling period
and therefore
results in that the
CA UE measures
the radio resources
of the SCell more
frequently.
However, this also
increases the UE
power
BTS3900:
consumption. A
V100R010C00
larger value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C00
the opposite effect.
If the sampling
period is not
configured and no
compatibility
protection
mechanism is
adopted for the CA
UE, the CA UE's
activity is
unpredictable when
the eNodeB
configures an SCell
for the CA UE.
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
by the setting of the
FixedBfMimoMode
parameter. For
details, see
the description of
impact on radio
network
performance of the
FixedBfMimoMode
parameter.
If this parameter is
set to
TxD_BF_ADAPTIV
E, the
transmission mode
that applies to UEs
in a cell can be TM2 BTS3900:
or beamforming V100R008C01
and the peak BTS3900 LTE: Radio L
transmission rates V100R008C01
of MIMO UEs are
affected. This
parameter
can be set to
TxD_BF_ADAPTIV
E in scenarios
without requiring
TM3 transmission
mode.
If this parameter is
set to
MIMO_BF_ADAPTI
VE, the eNodeB
adaptively uses
beamforming or
open-loop MIMO
mode to transmit
The setting of this
parameter
determines the
transmission modes
BTS3900:
that apply to UEs
V100R009C00
served by a multi-
BTS3900 LTE: Radio L
antenna eNodeB
V100R009C00
and therefore
affects performance
such as the
throughput and
coverage.
procedure
compared with that
when this
parameter is set to
OFF, and can
transmit one or
more data streams
after the handover.
Therefore, the
downlink
throughput
increases.
However, if a high
PDCCH
aggregation level is
used on the
eNodeB side, the
BTS3900:
service drop rate
V100R009C00
increases.
BTS3900 LTE: Radio L
2) If this parameter
V100R009C00
is set to OFF, the
eNodeB performs
an additional MIMO
reconfiguration
procedure
compared with that
when this
parameter is set to
OFF. In this case, if
the UE uses TM2,
and a low PDCCH
aggregation level is
used on the
eNodeB side, the
service drop rate
decreases.
However, the UE
transmits only a
switch the UE
transmission
mode from single-
stream
beamforming mode
to dual-stream
beamforming
mode. If this
parameter is set to
a larger value, it is
easier to
switch a UE from
dual-stream
beamforming mode
to single-stream
beamforming
mode. If this
BTS3900:
parameter is set to
V100R010C00
a smaller value, it is
BTS3900 LTE: Radio L
easier to
V100R010C00
switch a UE from
single-stream
beamforming mode
to dual-stream
beamforming
mode. The best
performance can be
achieved only when
the setting of
this parameter
matches the
performance of
single-stream
beamforming
and dual-stream
beamforming on the
network. Otherwise,
the throughput
specifies whether to
switch the UE
transmission
mode from TM3
dual-stream mode
to dual-stream
beamforming mode.
If
this parameter is
set to a smaller
value, it is easier to
switch a
UE from TM3 dual-
stream mode to
dual-stream
beamforming mode.
If this
BTS3900:
parameter is set to
V100R010C00
a larger value, it is
BTS3900 LTE: Radio L
more difficult to
V100R010C00
switch
a UE from TM3
dual-stream mode
to dual-stream
beamforming mode.
The
best performance
can be achieved
only when the
setting of this
parameter
matches the
performance of
beamforming and
TM3 on the
network. Otherwise,
the throughput and
coverage may
specifies whether to
switch the UE
transmission
mode from dual-
stream
beamforming mode
to TM3 dual-stream
mode.
If this parameter is
set to a larger
value, it is easier to
switch
a UE from dual-
stream
beamforming mode
to TM3 dual-stream
mode. BTS3900:
If this parameter is V100R010C10
set to a smaller BTS3900 LTE: Radio L
value, it is more V100R010C10
difficult
to switch a UE from
dual-stream
beamforming mode
to TM3 dual-stream
mode. The best
performance can be
achieved only when
the setting of
this parameter
matches the
performance of
beamforming and
TM3 on the
network. Otherwise,
the throughput and
coverage may
specifies whether to
switch the UE
transmission
mode from TM3
dual-stream mode
to dual-stream
beamforming mode.
If this parameter is
set to a larger
value, it is more
difficult
to switch a UE from
TM3 dual-stream
mode to dual-
stream
beamforming
mode. BTS3900:
If this parameter is V100R010C10
set to a smaller BTS3900 LTE: Radio L
value, it is easier V100R010C10
to switch a UE from
TM3 dual-stream
mode to dual-
stream
beamforming
mode. The best
performance can be
achieved only when
the setting of
this parameter
matches the
performance of
beamforming and
TM3 on the
network. Otherwise,
the throughput and
coverage may
switch the UE
transmission
mode from single-
stream
beamforming mode
to dual-stream
beamforming
mode. If this
parameter is set to
a larger value, it is
easier to
switch a UE from
dual-stream
beamforming mode
to single-stream
beamforming
mode. If this
BTS3900:
parameter is set to
V100R010C10
a smaller value, it is
BTS3900 LTE: Radio L
easier to
V100R010C10
switch a UE from
single-stream
beamforming mode
to dual-stream
beamforming
mode. The best
performance can be
achieved only when
the setting of
this parameter
matches the
performance of
single-stream
beamforming
and dual-stream
beamforming on the
network. Otherwise,
the throughput
specifies whether to
switch the UE
transmission
mode from dual-
stream
beamforming mode
to TM3 dual-stream
mode.
If this parameter is
set to a larger
value, it is easier to
switch
a UE from dual-
stream
beamforming mode
to TM3 dual-stream
mode. BTS3900:
If this parameter is V100R010C10
set to a smaller BTS3900 LTE: Radio L
value, it is more V100R010C10
difficult
to switch a UE from
dual-stream
beamforming mode
to TM3 dual-stream
mode. The best
performance can be
achieved only when
the setting of
this parameter
matches the
performance of
beamforming and
TM3 on the
network. Otherwise,
the throughput and
coverage may
If this parameter is
set to a small value,
the measured
weight is more likely
to be used.
However, the
instantaneous
weight
may be more
appropriate for
channels. In this
case, the
throughput
BTS3900:
of each
V100R010C10
beamforming UE
BTS3900 LTE: Radio L
decreases. If this
V100R010C10
parameter is set to
a large
value, the
measured weight is
less likely to be
used. However, the
measured weight
may be more
appropriate for
channels. In this
case,
the throughput of
each beamforming
UE decreases.
If this parameter is
set to a small value,
the measured
weight is more likely
to be used.
However, the
instantaneous
weight
may be more
appropriate for
channels. In this
case, the
throughput
BTS3900:
of each
V100R010C10
beamforming UE
BTS3900 LTE: Radio L
decreases. If this
V100R010C10
parameter is set to
a large
value, the
measured weight is
less likely to be
used. However, the
measured weight
may be more
appropriate for
channels. In this
case,
the throughput of
each beamforming
UE decreases.

If the setting of this

BTS3900:
parameter does not
V100R010C10
match the antenna
BTS3900 LTE: Radio L
type, the cell
V100R010C10
throughput is
decreased.
If this parameter is
set to ON, the
transmission mode
directly changes
from TM3 dual-
stream mode to
dual-stream
beamforming mode
when switching
conditions are met,
reducing switching
time and increasing
BTS3900:
the downlink
V100R010C10
throughput.
BTS3900 LTE: Radio L
If this parameter is
V100R010C10
set to OFF, the
transmission mode
changes from TM3
dual-stream mode
to single-stream
beamforming and
then to dual-stream
beamforming mode
when switching
conditions are met,
decreasing the
downlink
throughput.

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
A larger value of
this parameter
leads to a lower
probability that a
low-speed UE
switches from dual-
stream
beamforming to
TM3 rank 2.
A smaller value of
this parameter
leads to a higher
probability that a
low-speed UE BTS3900:
switches from dual- V100R010C10
stream BTS3900 LTE: Radio L
beamforming to V100R010C10
TM3 rank 2.
Optimal
performance can be
provided only when
the setting of this
parameter matches
the performance of
beamforming and
TM3 on the
network. Otherwise,
throughput and
coverage
performance may
decrease.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
If this parameter is
set to ON, the
eNodeB adaptively
configures the
period and offset of
periodic CQI
reporting for UEs. If
this parameter is
set to OFF, the
eNodeB configures
the CQI reporting
period for UEs
based on the BTS3900:
setting of the V100R010C10
UserCqiPeriodCfg BTS3900 LTE: Radio L
parameter. The CQI V100R010C10
offset is mapped to
a corresponding
reporting period.
The setting of this
parameter affects
the downlink and
uplink throughput
and the number of
users. For details,
see the description
of the
UserCqiPeriod
parameter.

A smaller value of
this parameter
results in more
frequent periodic
CQI reporting,
higher downlink
throughput, and
fewer UEs that can
BTS3900:
participate in CQI
V100R010C10
reporting, reducing
BTS3900 LTE: Radio L
uplink throughput
V100R010C10
due to the decrease
of the number of
available RBs for
uplink data
transmission. A
larger value of this
parameter results in
the opposite
effects.
When the PUCCH
experiences severe
interference or the
false detection rate
of the PUCCH TPC
command is high,
the demodulation
performance of
format 2a and
format 2b is poor. In
this case, set this
parameter to OFF.
This ensures that
CQI and HARQ-
ACK cannot be sent
BTS3900:
simultaneously, and
V100R010C10
therefore the false
BTS3900 LTE: Radio L
detection rate of the
V100R010C10
downlink HARQ-
ACK decreases,
and downlink
throughout
increases. When
the PUCCH
performance is
good, set this
parameter to ON. In
this case, CQI and
ACK/NACK can be
sent
simultaneously, and
therefore the CQI
discarding rate
decreases.

Setting this
parameter to ON
increases the
downlink UE
BTS3900:
throughput but also
V100R010C10
increases the
BTS3900 LTE: Radio L
handover signaling
V100R010C10
overheads. Setting
this parameter to
OFF does not affect
radio network
performance.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
A smaller value of
this parameter
results in more UEs
entering DL CoMP
and smaller
average DL
throughput of DL
CoMP UEs. If the
value of this
parameter is set to
an excessively
small value, the
average DL
throughput of the
BTS3900:
cell may experience
V100R008C00
negative gains. A
BTS3900 LTE: Radio L
larger value of this
V100R008C00
parameter results in
less UEs entering
DL CoMP and
larger average DL
throughput of DL
CoMP UEs. If the
value of this
parameter is set to
a value greater than
the offset of event
A3 used in
handovers, UEs
may be handed
over rather than
enter DL CoMP.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

If this switch is on, BTS3900:

the PA is adjusted. V100R008C00
If this switch is off, BTS3900 LTE: Radio L
the PA is not V100R002C00
adjusted.
If the RS power is
fixed, setting this
parameter to a
large value
increases the
transmit power and
MCS for all UEs in
the cell, which
results in power
limitation and
affects throughput.
Setting this
parameter to a
small value
BTS3900:
decreases the
V100R008C00
transmit power and
BTS3900 LTE: Radio L
MCS for all UEs in
V100R002C00
the cell but reduces
cell throughput.
When you modify
the PaPcOff
parameter, modify
the following
parameters
accordingly: Pb,
PcfichPwr,
PbchPwr, SchPwr,
DbchPwr, PchPwr,
RaRspPwr, PrsPwr,
DediDciPwrOffset,
PwrOffset, CcuPa,
and CeuPa.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

This parameter,
together with the
DrxInactivityTimerU
nsync and
OnDurationTimerUn
sync parameters,
affects the DRX
mechanism for UEs
in the out-of-
synchronization
state. If the settings
of other DRX
BTS3900:
parameters remain
V100R008C00
unchanged, a
BTS3900 LTE: Radio L
smaller value of this
V100R008C00
parameter results in
higher UE power
consumption but
shorter service
delay and better
KPIs such as the
service drop rate
and the handover
success rate, and a
larger value of this
parameter results in
the opposite
effects.
If this parameter is
set to ON, the
number of CQI,
PMI, RI, and PTI
reports sent on the
PUCCH decreases,
and the downlink
data transmission
performance
deteriorates in a
cell with DRX
BTS3900:
enabled. In
V100R008C00
addition, if UEs in
BTS3900 LTE: Radio L
compliance with
V100R008C00
3GPP Release 9 or
later do not support
the cqi-Mask IE, the
compatibility
problem between
UEs and the
eNodeB may occur.
As a result, the
downlink
throughput
decreases in a cell
with DRX enabled.
This parameter,
together with the
LongDrxCycleUnsy
nc and
DrxInactivityTimerU
nsync parameters,
affects the DRX
mechanism for UEs
in the out-of-
synchronization
BTS3900:
state. If the settings
V100R008C00
of other DRX
BTS3900 LTE: Radio L
parameters remain
V100R008C00
unchanged, a
smaller value of this
parameter results in
lower UE power
consumption but
longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleUnsy
nc and
OnDurationTimerUn
sync parameters,
affects the DRX
mechanism for UEs
in the out-of-
synchronization
BTS3900:
state. If the settings
V100R008C00
of other DRX
BTS3900 LTE: Radio L
parameters remain
V100R008C00
unchanged, a
smaller value of this
parameter results in
lower UE power
consumption but
longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.

If the bearers for a

UE have multiple BTS3900:
QCIs, the setting of V100R009C00
this parameter BTS3900 LTE: Radio L
affects the power V100R009C00
saving performance
of the UE.
set to OFF and the
cell serves a large
number of UEs that
are configured with
only SRS
resources, or
periodic CQI, or
neither, UEs are
scheduled in the
downlink in a
centralized manner,
thereby increasing
the downlink
scheduling delay for
UEs and
decreasing
downlink BTS3900:
throughput in the V100R009C00
cell. BTS3900 LTE: Radio L
If this parameter is V100R009C00
set to ON and the
cell serves a large
number of UEs that
are configured with
only SRS
resources, or
periodic CQI, or
neither, the
probability that UEs
are scheduled in a
centralized manner
decreases. As a
result, the downlink
scheduling delay for
UEs decreases,
and UE downlink
throughput

If this switch is on,

network throughput
in the downlink
increases.
However, if two
BTS3900:
consecutive DTXs
V100R010C00
occur because of
BTS3900 LTE: Radio L
inconsistent DTX
V100R010C00
active status on the
UE side and the
eNodeB side, the
downlink block error
rate (BLER) may
increase.
dedicated DRX
parameters and
gap-assisted
GERAN
measurement
configuration to a
UE. The UE
chooses the
measurement
method based on
its capability. If the
UE supports DRX-
based
measurement, the
UE performs DRX-
based
measurement. If the
BTS3900:
UE does not
V100R010C10
support DRX-based
BTS3900 LTE: Radio L
measurement, the
V100R010C10
UE performs gap-
assisted
measurement. The
GERAN-
measurement-
dedicated DRX
parameters enable
a UE to perform
GERAN
measurement after
the UE enters sleep
time in the DRX
state, and it is
suggested that the
sleep time be long,
which affects other
services.
If this parameter is
This parameter,
together with the
OnDurTimerForMea
s,
DrxInactTimerForM
eas,
ShortDrxCycleForM
eas,
ShortCycleTimerFor
Meas, and
DrxReTxTimerForM
eas parameters,
affects the DRX
mechanism. If the BTS3900:
settings of other V100R010C10
DRX parameters BTS3900 LTE: Radio L
remain unchanged, V100R010C10
a smaller value of
this parameter
results in higher UE
power consumption
but shorter service
delay and better
KPIs such as the
service drop rate
and the handover
success rate, and a
larger value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleForM
eas,
DrxInactTimerForM
eas,
ShortDrxCycleForM
eas,
ShortCycleTimerFor
Meas, and
DrxReTxTimerForM
eas parameters, BTS3900:
affects the DRX V100R010C10
mechanism. If the BTS3900 LTE: Radio L
settings of other V100R010C10
DRX parameters
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleForM
eas,
OnDurTimerForMea
s,
ShortDrxCycleForM
eas,
ShortCycleTimerFor
Meas, and
DrxReTxTimerForM
eas parameters, BTS3900:
affects the DRX V100R010C10
mechanism. If the BTS3900 LTE: Radio L
settings of other V100R010C10
DRX parameters
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
LongDrxCycleForM
eas,
OnDurTimerForMea
s,
DrxInactTimerForM
eas,
ShortDrxCycleForM
eas, and
ShortCycleTimerFor
Meas parameters,
affects the DRX
mechanism. If the
settings of other
DRX parameters
remain unchanged
and this parameter
is set to a small
BTS3900:
value, the UE may
V100R010C10
enter sleep time
BTS3900 LTE: Radio L
before receiving the
V100R010C10
retransmitted data.
In this case, the
retransmitted data
may not be
correctly received. If
this parameter is
set to a large value
and the settings of
other DRX
parameters remain
unchanged, the UE
may keep waiting
for the
retransmitted data
even when the data
is lost. In this case,
the UE stays in
active time and the
If the
ShortDrxSwForMea
s parameter is set
to ON, the short
DRX cycle takes
BTS3900:
effect. As a result,
V100R010C10
the service delay is
BTS3900 LTE: Radio L
shortened but the
V100R010C10
UE power
consumption
increases. Setting
this parameter to
OFF leads to the
opposite effects.
This parameter,
together with the
LongDrxCycleForM
eas,
OnDurTimerForMea
s,
DrxInactTimerForM
eas,
ShortCycleTimerFor
Meas, and
DrxReTxTimerForM
eas parameters, BTS3900:
affects the DRX V100R010C10
mechanism. If the BTS3900 LTE: Radio L
settings of other V100R010C10
DRX parameters
remain unchanged,
a smaller value of
this parameter
results in higher UE
power consumption
but shorter service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleForM
eas,
OnDurTimerForMea
s,
DrxInactTimerForM
eas,
ShortDrxCycleForM
eas, and
DrxReTxTimerForM
eas parameters, BTS3900:
affects the DRX V100R010C10
mechanism. If the BTS3900 LTE: Radio L
settings of other V100R010C10
DRX parameters
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
SRs are falsely
detected when UEs
are in the DRX
state, and eNodeB
scheduling times
and channel
measurement
results are reduced
before falsely
detected SRs are
confirmed, which
decreases the
packet error rate
and incorrect
scheduling of
transmission
parameters. BTS3900:
However, due to V100R010C10
delay of eNodeB BTS3900 LTE: Radio L
scheduling and V100R010C10
measurement result
reception, the delay
may increase and
the throughput may
decrease when the
cell is heavily
loaded.
If this switch is
turned off, the
detection of false
SR alarms is
delayed, leading to
high BLER and
false detection of
channel
measurement,
which affects the

If this switch is
turned on, service
drops due to
incompatibility will
not occur after DRX
is enabled for a
specific UE.
If this switch is
turned off, service
drops may occur BTS3900:
because V100R010C10
drxStartOffset is BTS3900 LTE: Radio L
configured on the V100R010C10
special subframe
for certain UEs and
downlink
scheduling is
performed on the
subframe, and
these UEs cannot
receive information
indicating downlink
scheduling.
If this parameter is
set to ON, the GSM
measurement
reporting delay and
service drop rate
decrease, but the
throughput of UEs
running services
also decreases
BTS3900:
during the
V100R010C10
measurement. If
BTS3900 LTE: Radio L
this parameter is
V100R010C10
set to OFF, special
scheduling is
disabled. The GSM
measurement
reporting delay
increases for UEs
running services,
and therefore the
service drop rate
increases.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
The entering
condition of event
A2 is (Ms + Hys >
Thresh), where
Thresh is the
threshold for this
event. A larger
value of this
parameter indicates
an easier triggering
condition of event
A2 and therefore an
easier triggering
condition of blind
redirection or CCO.
If this parameter
value is too large,
BTS3900:
the number of
V100R008C00
handovers
BTS3900 LTE: Radio L
decreases and that
V100R008C00
of redirections or
CCOs increases,
which increases the
service interruption
duration. A smaller
value of this
parameter indicates
a more difficult
triggering condition
of event A2 and
therefore a more
difficult triggering
condition of blind
redirection or CCO.
A too small
parameter value
increases the
service drop risk.
The entering
condition of event
A2 is (Ms + Hys >
Thresh), where
Thresh is the
threshold for this
event. A larger
value of this
parameter indicates
an easier triggering
condition of event
A2 and therefore an
easier triggering
condition of blind
redirection or CCO.
If this parameter
value is too large,
BTS3900:
the number of
V100R008C00
handovers
BTS3900 LTE: Radio L
decreases and that
V100R008C00
of redirections or
CCOs increases,
which increases the
service interruption
duration. A smaller
value of this
parameter indicates
a more difficult
triggering condition
of event A2 and
therefore a more
difficult triggering
condition of blind
redirection or CCO.
A too small
parameter value
increases the
service drop risk.
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
A smaller value of
this parameter
results in a lower
BTS3900:
probability of
V100R010C10
triggering uplink-
BTS3900 LTE: Radio L
quality-based
V100R010C10
handovers. A larger
value of this
parameter results in
the opposite effect.

A smaller value of
this parameter
results in a higher
BTS3900:
probability of
V100R010C10
triggering uplink-
BTS3900 LTE: Radio L
quality-based
V100R010C10
handovers. A larger
value of this
parameter results in
the opposite effect.

A smaller value of
this parameter
leads to more
frequent UE BTS3900:
mobility status V100R010C10
switching and lower BTS3900 LTE: Radio L
decision accuracy. V100R010C10
A larger value of
this parameter
leads to the
opposite effect.

A small value of this

parameter may
BTS3900:
cause UEs that are
V100R010C10
not in high-speed
BTS3900 LTE: Radio L
railway scenarios to
V100R010C10
be redirected to a
high-speed
frequency.
If this parameter is
set to
HANDOVER_IMME
DIATELY, the
eNodeB
immediately
performs handover
decision after
receiving a
measurement
report for CSFB to
UTRAN. This
ensures that the UE
can be handed over
in time. If this
BTS3900:
parameter is set to
V100R010C10
BASED_ON_SIGN
BTS3900 LTE: Radio L
AL_STRENGTH,
V100R010C10
the UE can be
handed over to the
strongest
neighboring cell but
the CSFB latency
extends. If this
parameter is set to
BASED_ON_FREQ
_PRIORITY, the UE
can be handed over
to a cell on a
frequency with a
priority as high as
possible but the
CSFB latency
extends.

A smaller value of
this parameter
results in a lower
the possibility that
the eNodeB waits
for the next
measurement
BTS3900:
report after
V100R010C10
receiving the first
BTS3900 LTE: Radio L
B1-related
V100R010C10
measurement
report on UTRAN,
shortening the
CSFB latency. A
larger value of this
parameter results in
the opposite
effects.
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
downlink
throughput, but it
decreases the
uplink throughput if
uplink coding rate
increases because
of PMI reporting.
With 2-way
transmission
enabled, closed-
loop MIMO
adaptation is
dependent on UEs.
If the PMI values
reported by UEs
are unreliable, the
demodulation BTS3900:
capability of UEs is V100R009C00
low under closed- BTS3900 LTE: Radio L
loop MIMO V100R009C00
schemes, or UEs
move fast such as
in high-speed
railway scenarios,
closed-loop MIMO
adaptation
decreases the
downlink
throughput
compared with
open-loop MIMO
adaptation. When
4-way transmission
is enabled on the
network, closed-
loop MIMO
adaptation
of PMI reporting.
With 2-way
transmission
enabled, TM4 is
dependent on UEs.
If the PMI values
reported by UEs
are unreliable, the
demodulation
capability of UEs is
low under closed-
loop MIMO
schemes, or UEs
move fast such as
in high-speed
railway scenarios,
TM4 decreases the BTS3900:
downlink V100R009C00
throughput BTS3900 LTE: Radio L
compared with V100R009C00
TM3. When 4-way
transmission is
enabled on the
network, TM4
significantly
increases the
downlink
throughput in non-
high-speed
scenarios
compared with
TM3, but it
decreases the
uplink throughput if
uplink coding rate
increases because
of PMI reporting.
network compared
with that when this
parameter is set to
ADAPTIVE.
Therefore, the
service drop rate
increases. If a high
PDCCH
aggregation level is
selected on the
network, the access
success rate
increases but
downlink
throughput
decreases because
only a single data BTS3900:
stream can be V100R009C00
transmitted. BTS3900 LTE: Radio L
If this parameter is V100R009C00
set to ADAPTIVE,
the eNodeB does
not perform a MIMO
reconfiguration
procedure for a UE
that initially
accesses the
network, compared
with that when this
parameter is set to
TM2. Therefore, the
service drop rate
decreases. In
addition, downlink
throughput
increases because
one or more data
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
If this parameter is
set to
RESELBASED, the
number of cell
reselections due to
MLB for UEs in idle
mode decreases
and the throughput
of cells working on
frequencies with
higher cell
BTS3900:
reselection priorities
V100R009C00
can be maximized.
BTS3900 LTE: Radio L
If this parameter is
V100R009C00
set to
MLBPRIOBASED,
the number of cell
reselections due to
MLB for UEs in idle
mode increases
and the throughput
of cells working on
frequencies with
higher MLB
priorities can be
maximized.
other UEs in this
cell cannot achieve
the maximum
throughput.
If the
PROTECTTIMERM
ODE option is
deselected, the
number of MLB-
based handovers of
the UE is increased
and the UE
throughput is
decreased.
However, other UEs
in this cell can
achieve maximum
BTS3900:
throughput.
V100R009C00
If the
BTS3900 LTE: Radio L
SPECEVENTA1A2
V100R009C00
MOD option is
selected, specific
A1/A2
measurement event
parameters are
delivered to MLB-
based handover-in
UEs, preventing
UEs from coverage-
and MLB-based
ping-pong
handovers. In this
case, the number of
UE handovers is
decreased, and the
UE throughput does
not deteriorate,
while the UE
If this parameter is
set to a small value,
the UE is selected
to perform MLB in
an early time, the
number of MLB-
based handovers is
increased, and the
UE throughput
cannot be
maximized.
However, other UEs BTS3900:
in this cell achieve V100R009C00
the maximum BTS3900 LTE: Radio L
throughput. If this V100R009C00
parameter is set to
a large value, the
number of MLB-
based handovers is
decreased and the
UE throughput is
maximized.
However, other UEs
in this cell cannot
achieve the
maximum
throughput.

If this parameter is
set to a small value,
the A1 event is
easy to be
triggered, and the
UE throughput can
be maximized,
while the handover
BTS3900:
success rate is
V100R009C00
decreased. If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
a large value, the
A1 event is difficult
to be triggered, a
high UE handover
success rate is
guaranteed, while
the UE throughput
cannot be
maximized.
If this parameter is
set to a small value,
the A1 event is
easy to be
triggered, and the
UE throughput can
be maximized,
while the handover
BTS3900:
success rate is
V100R009C00
decreased. If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
a large value, the
A1 event is difficult
to be triggered, a
high UE handover
success rate is
guaranteed, while
the UE throughput
cannot be
maximized.

If this parameter is
set to a small value,
the A2 event is
difficult to be
triggered, and the
UE throughput can
be maximized,
while the handover
BTS3900:
success rate is
V100R009C00
decreased. If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
a large value, the
A2 event is easy to
be triggered, a high
UE handover
success rate is
guaranteed, while
the UE throughput
cannot be
maximized.
If this parameter is
set to a small value,
the A2 event is
difficult to be
triggered, and the
UE throughput can
be maximized,
while the handover
BTS3900:
success rate is
V100R009C00
decreased. If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
a large value, the
A2 event is easy to
be triggered, a high
UE handover
success rate is
guaranteed, while
the UE throughput
cannot be
maximized.

Selecting the
UtranRedirectIMMC
I option maximizes
UE throughput in
BTS3900:
LTE cells but
V100R010C10
increases Uu
BTS3900 LTE: Radio L
signaling overhead.
V100R010C10
Deselecting the
UtranRedirectIMMC
I option results in
the opposite
effects.
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
After preallocation
is enabled, the
delay of uplink data
transmisstion is
shortened, but the
uplink interference
and UE power
BTS3900:
comsumption are
V100R009C00
increased. After
BTS3900 LTE: Radio L
preallocation is
V100R009C00
disabled, the delay
of uplink data
transmission is
increased, but the
uplink interference
and UE power
consumption are
decreased.

After smart
preallocation is
enabled, the delay
of uplink data
transmission is
shortened, but the
uplink interference
and UE power BTS3900:
consumption are V100R009C00
increased. After BTS3900 LTE: Radio L
smart preallocation V100R009C00
is disabled, the
delay of uplink data
transmission is
increased, but the
uplink interference
and UE power
consumption are
decreased.

A smaller value of
this parameter
results in shorter
uplink delay but
BTS3900:
more UE power
V100R009C00
consumption and
BTS3900 LTE: Radio L
greater uplink
V100R009C00
interference. A
larger value of this
parameter results in
the opposite
effects.
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
If this parameter is
set to 0, smart
preallocation does
not take effect. A
larger value of this
parameter leads to
shorter uplink delay
but more UE power
BTS3900:
consumption and
V100R009C00
greater uplink
BTS3900 LTE: Radio L
interference. A
V100R009C00
smaller value of this
parameter results in
the opposite
effects. If this
parameter value is
greater than 1000,
delay of ping
packets can be
reduced.
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

If the
SrsPeriodAdaptive
parameter is set to
ON, the eNodeB
adaptively adjusts
the SRS reporting
period for UEs that
will access the
network after the
parameter is set.
The adjustment is
BTS3900:
based on the load
V100R010C10
of SRS resources
BTS3900 LTE: Radio L
and achieves a
V100R010C10
tradeoff between
the number of UEs
served and network
performance. If this
parameter is set to
OFF, the eNodeB
uses a fixed SRS
reporting period for
UEs that will access
the network after
the parameter is
set.
The setting of this
parameter applies
to all UEs in the
cell. Set this
parameter to
achieve a tradeoff
between the
number of UEs
served and network
BTS3900:
performance. A
V100R010C10
shorter SRS
BTS3900 LTE: Radio L
reporting period
V100R010C10
results in a shorter
interval of SRS
measurements and
results in better
user experience
and a lower SRS
capacity in the cell.
A longer SRS
period results in the
opposite effects.

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
RAT measurement
objects that a UE
can measure also
depends on the UE
capability. Currently,
the protocol defines
that a UE can
measure a
maximum of 7 inter-
frequency and inter-
RAT measurement
objects. If this
parameter is set to
a value larger than
7, compatibility
problems may
occur and UEs may
BTS3900:
become abnormal.
V100R010C00
A smaller value of
BTS3900 LTE: Radio L
this parameter
V100R010C00
leads to fewer inter-
frequency and inter-
RAT measurement
objects that can be
delivered over the
Uu interface. If the
measurement
configurations of
some inter-
frequency and inter-
RAT measurement
objects are not
delivered,
necessary
frequency
measurement
information cannot
be obtained and
also depends on
the UE capability
and the maximum
number of inter-
frequency and inter-
RAT measurement
objects for the UE
to measure.
Currently, the
protocol defines
that a UE can
measure a
maximum of three
E-UTRAN FDD
frequencies. If this
parameter is set to
a value larger than BTS3900:
3, compatibility V100R010C00
problems may BTS3900 LTE: Radio L
occur and UEs may V100R010C00
become abnormal.
A smaller value of
this parameter
leads to fewer
neighboring E-
UTRAN FDD
frequencies that
can be delivered
over the Uu
interface. If the
measurement
configurations of
some neighboring
E-UTRAN FDD
frequencies are not
delivered,
necessary
also depends on
the UE capability
and the maximum
number of inter-
frequency and inter-
RAT measurement
objects for the UE
to measure.
Currently, the
protocol defines
that a UE can
measure a
maximum of three
E-UTRAN TDD
frequencies. If this
parameter is set to
a value larger than BTS3900:
3, compatibility V100R010C00
problems may BTS3900 LTE: Radio L
occur and UEs may V100R010C00
become abnormal.
A smaller value of
this parameter
leads to fewer
neighboring E-
UTRAN TDD
frequencies that
can be delivered
over the Uu
interface. If the
measurement
configurations of
some neighboring
E-UTRAN TDD
frequencies are not
delivered,
necessary
measure also
depends on the UE
capability and the
maximum number
of inter-frequency
and inter-RAT
measurement
objects for the UE
to measure.
Currently, the
protocol defines
that a UE can
measure a
maximum of three
UTRAN FDD
frequencies. If this
parameter is set to
BTS3900:
a value larger than
V100R010C00
3, compatibility
BTS3900 LTE: Radio L
problems may
V100R010C00
occur and UEs may
become abnormal.
A smaller value of
this parameter
leads to fewer
UTRAN FDD
frequencies that
can be delivered
over the Uu
interface. If the
measurement
configurations of
some UTRAN FDD
frequencies are not
delivered,
necessary
frequency
measurement
measure also
depends on the UE
capability and the
maximum number
of inter-frequency
and inter-RAT
measurement
objects for the UE
to measure.
Currently, the
protocol defines
that a UE can
measure a
maximum of three
UTRAN TDD
frequencies. If this
parameter is set to
BTS3900:
a value larger than
V100R010C00
3, compatibility
BTS3900 LTE: Radio L
problems may
V100R010C00
occur and UEs may
become abnormal.
A smaller value of
this parameter
leads to fewer
UTRAN TDD
frequencies that
can be delivered
over the Uu
interface. If the
measurement
configurations of
some UTRAN TDD
frequencies are not
delivered,
necessary
frequency
measurement
also depends on
the UE capability
and the maximum
number of inter-
frequency and inter-
RAT measurement
objects for the UE
to measure.
Currently, the
protocol defines
that a UE can
measure a
maximum of 32
GERAN
frequencies. If this
parameter is set to
a value larger than BTS3900:
32, compatibility V100R010C00
problems may BTS3900 LTE: Radio L
occur and UEs may V100R010C00
become abnormal.
A smaller value of
this parameter
leads to fewer
GERAN
frequencies that
can be delivered
over the Uu
interface. If the
measurement
configurations of
some GERAN
frequencies are not
delivered,
necessary
frequency
measurement
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
A smaller value of
this parameter
results in more UEs
entering UL CoMP
and smaller
average UL
throughput of UL
CoMP UEs. A larger
value of this
parameter results in
BTS3900:
less UEs entering
V100R008C00
UL CoMP and
BTS3900 LTE: Radio L
larger average UL
V100R008C00
throughput of UL
CoMP UEs. If the
value of this
parameter is set to
a value greater than
the event offset
used in handovers,
UEs may be
handed over rather
than enter UL
CoMP.

A smaller value of
this parameter
leads to a larger
number of UEs
using UL CoMP and
lower average
BTS3900:
uplink throughput of
V100R008C01
these UEs. A larger
BTS3900 LTE: Radio L
value of this
V100R008C01
parameter leads to
a smaller number of
UEs using UL
CoMP and higher
average uplink
throughput of these
UEs.
A smaller value of
this parameter
results in more UEs
selected for UL
CoMP and a
smaller increase in
the average uplink
throughput. A larger
value of this BTS3900:
parameter results in V100R010C10
the opposite BTS3900 LTE: Radio L
effects. V100R010C10
If the value of this
parameter is
greater than the
offset of event A3
used in handovers,
UEs are handed
over rather than be
selected for UL
CoMP.

BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R001C01

It is recommended
that this parameter
be set to
UU_DISABLE(Disa
ble). Currently,
power control for
the PUSCH is
designed based on BTS3900:
the condition that V100R008C00
this parameter is BTS3900 LTE: Radio L
set to V100R001C01
UU_DISABLE(Disa
ble). If this
parameter is set to
UU_ENABLE(Enabl
e), power control for
the PUSCH results
in user data rate
decrease.
If the value of this
parameter is too
small, the transmit
power of the SRS is
too low, so that the
uplink timing
requirement is not
met and the SINR
of data channels
cannot be
measured
accurately. Thus, BTS3900:
the network V100R008C00
performance BTS3900 LTE: Radio L
deteriorates. If the V100R001C01
value of this
parameter is too
large, the transmit
power of the SRS is
excessively high,
which increases the
interference to
other channels and
neighboring cells
and thus reduces
the throughput of
the entire network.

If the value of this

parameter is too
small, the transmit
power of the SRS is
too low, so that the
uplink timing
requirement is not
met and the SINR
of data channels
cannot be
measured
accurately. Thus, BTS3900:
the network V100R008C00
performance BTS3900 LTE: Radio L
deteriorates. If the V100R001C01
value of this
parameter is too
large, the transmit
power of the SRS is
excessively high,
which increases the
interference to
other channels and
neighboring cells
and thus reduces
the throughput of
the entire network.
A large value of this
parameter indicates
a small impact of
the previous RSRP
value on the filtered
value and a large
impact of the RSRP
value measured
BTS3900:
this time on the
V100R008C00
filtered value.
BTS3900 LTE: Radio L
A small value of this
V100R001C01
parameter indicates
a large impact of
the previous RSRP
value on the filtered
value and a small
impact of the RSRP
value measured
this time on the
filtered value.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
An appropriate
value of this
parameter
effectively reduces
the possibility of
handover attempts
between non-
neighboring cells
and therefore BTS3900:
increases handover V100R008C00
success rates. A BTS3900 LTE: Radio L
small value of this V100R005C00
parameter results in
a high probability of
distance-based
handovers. A large
value of this
parameter results in
a low probability of
distance-based
handovers.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
DRX introduces
extra delay to
scheduling.
Therefore, if this
parameter is set to
ON and a UE with a
service whose QCI
is mapped to a high
requirement for the
delay is allowed to
enter DRX mode,
the QoS BTS3900:
satisfaction rate V100R008C00
decreases because BTS3900 LTE: Radio L
of the increase in V100R003C00
the delay of the
service. If this
parameter is set to
OFF and a UE with
a service whose
QCI is mapped to a
low requirement for
the delay is not
allowed to enter the
DRX state, it is
favorable for UE
power saving.
This parameter,
together with the
LongDrxCycle,
DrxInactivityTimer,
ShortDrxCycle,
DrxReTxTimer, and
DrxReTxTim
parameters, affects
the DRX
mechanism. If the BTS3900:
settings of other V100R008C00
DRX parameters BTS3900 LTE: Radio L
remain unchanged, V100R003C00
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycle,
OnDurationTimer,
ShortDrxCycle,
DrxShortCycleTimer
, and DrxReTxTimer
parameters, affects
the DRX
mechanism. If the BTS3900:
settings of other V100R008C00
DRX parameters BTS3900 LTE: Radio L
remain unchanged, V100R003C00
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycle,
OnDurationTimer,
DrxInactivityTimer,
ShortDrxCycle, and
DrxShortCycleTimer
parameters, affects
the DRX
mechanism. If the
settings of other
DRX parameters
remain unchanged
and this parameter
is set to a small
value, the UE may
enter sleep time
BTS3900:
before receiving the
V100R008C00
retransmitted data.
BTS3900 LTE: Radio L
In this case, the
V100R003C00
retransmitted data
may not be
correctly received. If
this parameter is
set to a large value
and the settings of
other DRX
parameters remain
unchanged, the UE
may keep waiting
for the
retransmitted data
even when the data
is lost. In this case,
the UE stays in
active time and the
power consumption
is large.
This parameter,
together with the
OnDurationTimer,
DrxInactivityTimer,
ShortDrxCycle,
DrxReTxTimer, and
DrxReTxTim
parameters, affects
the DRX
mechanism. If the
settings of other
DRX parameters BTS3900:
remain unchanged, V100R008C00
a smaller value of BTS3900 LTE: Radio L
this parameter V100R003C00
results in higher UE
power consumption
but shorter service
delay and better
KPIs such as the
service drop rate
and the handover
success rate, and a
larger value of this
parameter results in
the opposite
effects.

If the settings of
long DRX cycle
parameters, such
as LongDrxCycle,
OnDurationTimer,
DrxInactivityTimer,
and DrxReTxTimer
remain unchanged
and the
BTS3900:
SupportShortDrx
V100R008C00
parameter is set to
BTS3900 LTE: Radio L
UU_ENABLE, the
V100R003C00
short DRX cycle
takes effect. As a
result, the service
delay decreases
but the UE power
consumption
increases. The
value UU_DISABLE
results in the
opposite effects.
This parameter,
together with the
LongDrxCycle,
OnDurationTimer,
DrxInactivityTimer,
DrxReTxTimer, and
DrxReTxTim
parameters, affects
the DRX
mechanism. If the BTS3900:
settings of other V100R008C00
DRX parameters BTS3900 LTE: Radio L
remain unchanged, V100R003C00
a smaller value of
this parameter
results in higher UE
power consumption
but shorter service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycle,
OnDurationTimer,
DrxInactivityTimer,
ShortDrxCycle, and
DrxReTxTimer
parameters, affects
the DRX
mechanism. If the BTS3900:
settings of other V100R008C00
DRX parameters BTS3900 LTE: Radio L
remain unchanged, V100R003C00
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

The triggering
condition of event
A1 is as follows: Ms
- Hys > Thresh, and
the triggering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Where, Ms is the
measurement value
of the serving cell,
Hys is the
hysteresis for the
corresponding
event in the
BTS3900:
measurement
V100R008C00
configuration, and
BTS3900 LTE: Radio L
Thresh is the
V100R003C00
threshold for
triggering the
corresponding
event. A larger
value of Hys
causes a lower
probability of
triggering the
corresponding
event, and a
smaller value of
Hys causes a
higher probability of
triggering the
corresponding
event.
An appropriate
setting of this
parameter can
effectively prevent
unnecessary inter-
RAT measurements
and reduce the BTS3900:
number of inter- V100R008C00
RAT BTS3900 LTE: Radio L
measurements. A V100R003C00
larger value results
in a smaller
average number of
inter-RAT
measurements but
a higher probability
of service drops.

The entering
condition of event
A1 is (Ms - Hys >
Thresh), where
Thresh is the
threshold for this
event. A higher BTS3900:
threshold makes it V100R008C00
more difficult to BTS3900 LTE: Radio L
trigger event A1 V100R003C00
and stop inter-RAT
measurement. A
lower threshold
makes it easier to
trigger event A1
and stop inter-RAT
measurement.

The entering
condition of event
A1 is as follows: Ms
- Hys > Thresh.
Thresh is the
threshold for this
event. A larger
BTS3900:
value of Thresh
V100R008C00
results in a lower
BTS3900 LTE: Radio L
probability of
V100R003C00
triggering event A1
and therefore a
lower probability of
stopping inter-RAT
measurements. A
smaller value of
Thresh leads to a
higher probability.
The entering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Thresh is the
threshold for this
event. A larger
BTS3900:
value of Thresh
V100R008C00
results in a higher
BTS3900 LTE: Radio L
probability of
V100R003C00
triggering event A2
and therefore a
higher probability of
starting inter-RAT
measurements. A
smaller value of
Thresh leads to a
lower probability.

The entering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Thresh is the
threshold for this
event. A larger
BTS3900:
value of Thresh
V100R008C00
results in a higher
BTS3900 LTE: Radio L
probability of
V100R003C00
triggering event A2
and therefore a
higher probability of
starting inter-RAT
measurements. A
smaller value of
Thresh leads to a
lower probability.
This parameter
specifies the
threshold of event
B2 for triggering
coverage-based
handovers from the
E-UTRAN to
GERAN. A small
value of this
parameter leads to
a low probability of
BTS3900:
triggering event B2
V100R010C00
and thereby
BTS3900 LTE: Radio L
causing a high
V100R010C00
probability of
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event B2
and thereby
causing a high
probability of
performing E-
UTRAN-to-GERAN
handovers.

This parameter
specifies the
threshold of event
B2 for triggering
coverage-based
handovers from the
E-UTRAN to
GERAN. A small
value of this
parameter leads to
a low probability of
BTS3900:
triggering event B2
V100R010C00
and thereby
BTS3900 LTE: Radio L
causing a high
V100R010C00
probability of
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event B2
and thereby
causing a high
probability of
performing E-
UTRAN-to-GERAN
handovers.
This parameter
specifies the
threshold of event
B2 for triggering
coverage-based
handovers from the
E-UTRAN to
UTRAN. A small
value of this
parameter leads to
a low probability of
BTS3900:
triggering event B2
V100R010C00
and thereby
BTS3900 LTE: Radio L
causing a high
V100R010C00
probability of
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event B2
and thereby
causing a high
probability of
performing E-
UTRAN-to-UTRAN
handovers.

This parameter
specifies the
threshold of event
B2 for triggering
coverage-based
handovers from the
E-UTRAN to
UTRAN. A small
value of this
parameter leads to
a low probability of
BTS3900:
triggering event B2
V100R010C00
and thereby
BTS3900 LTE: Radio L
causing a high
V100R010C00
probability of
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event B2
and thereby
causing a high
probability of
performing E-
UTRAN-to-UTRAN
handovers.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

The entering
condition of event
B1 is as follows: Mn
+ Ofn - Hys >
Thresh.
Mn is the
measurement value
of the neighboring
cell. Ofn is the
frequency-specific
offset of the
neighboring cell.
Thresh is the
threshold for event
B1. Hys is the
hysteresis for event BTS3900:
B1. V100R008C00
A larger value of BTS3900 LTE: Radio L
Hys results in a V100R003C00
lower probability of
triggering event B1
and hence causes
a lower probability
of handover. A large
value may affect
user experience. A
smaller value of
Hys leads to a
higher probability of
triggering event B1.
A small value may
cause handover
decision errors and
ping-pong
handovers.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 1xRTT V100R003C00
cell, and a smaller
value results in a
higher probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 1xRTT V100R003C00
cell, and a smaller
value results in a
higher probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 1xRTT V100R003C00
cell, and a smaller
value results in a
higher probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
A larger value of
this parameter
results in a longer
waiting duration for
the eNodeB to
release services
and a higher
probability that the
MME releases the
services, which
leads to a larger BTS3900:
value of the L.E- V100R008C00
RAB.AbnormRel.M BTS3900 LTE: Radio L
ME counter, a V100R008C00
smaller value of the
L.E-
RAB.AbnormRel
counter, and a
larger number of
UEs in
RRC_CONNECTE
D mode.
A smaller value
results in the
opposite effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

A smaller value
indicates a shorter
average SRI period
for UEs in the cell
and results in a BTS3900:
smaller number of V100R008C00
UEs that can send BTS3900 LTE: Radio L
SRIs in the cell and V100R003C00
shorter access
delay for individual
UEs. A larger value
leads to the
opposite effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

A larger value of
this parameter
results in a longer
waiting duration for
the eNodeB to
release services
and a higher
probability that the
MME releases the
services, which
leads to a larger BTS3900:
value of the L.E- V100R008C00
RAB.AbnormRel.M BTS3900 LTE: Radio L
ME counter, a V100R008C00
smaller value of the
L.E-
RAB.AbnormRel
counter, and a
larger number of
UEs in
RRC_CONNECTE
D mode.
A smaller value
results in the
opposite effects.

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

If the
DrxPolicyMode
parameter is set to
QCIPRIORITY, the
DRX parameter
group selection for
BTS3900:
a UE for which the
V100R009C00
bearers have
BTS3900 LTE: Radio L
multiple QCIs is
V100R009C00
affected when the
priority of a QCI is
modified. In this
case, the power
saving performance
of the UE is
affected.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
B1 is as follows: Mn
+ Ofn - Hys >
Thresh.
Mn is the
measurement value
of the neighboring
cell. Ofn is the
frequency-specific
offset of the
neighboring cell.
Thresh is the
threshold for this
event. Hys is the
hysteresis for this
event, which is
used to prevent
frequent triggering BTS3900:
of event evaluation V100R008C00
caused by radio BTS3900 LTE: Radio L
signal fluctuation or V100R003C00
fading.
A larger value of
Hys results in a
lower probability of
triggering event B1
and hence causes
a lower probability
of handover. A large
value may affect
user experience. A
smaller value of
Hys leads to a
higher probability of
triggering event B1.
A small value may
cause handover
decision errors and
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 HRPD V100R003C00
cell, and a smaller
value leads to a
higher probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 HRPD V100R003C00
cell, and a smaller
value results in a
higher probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
CDMA2000 HRPD V100R003C00
cell, and a smaller
value results in a
higher probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

A smaller value of
this parameter
results in a lower
probability of non-
BTS3900:
optimized
V100R010C10
handovers from E-
BTS3900 LTE: Radio L
UTRAN to
V100R010C10
CDMA2000
eHRPD. A larger
value of this
parameter results in
the opposite effect.
A smaller value of
this parameter
results in a lower
probability of non-
BTS3900:
optimized
V100R010C10
handovers from E-
BTS3900 LTE: Radio L
UTRAN to
V100R010C10
CDMA2000
eHRPD. A larger
value of this
parameter results in
the opposite effect.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

The entering
condition of event
B1 is as follows: Mn
+ Ofn - Hys >
Thresh.
Mn is the
measurement value
of the neighboring
cell. Ofn is the
frequency-specific
offset of the
neighboring cell.
Thresh is the
threshold for event
B1. Hys is the
hysteresis for event BTS3900:
B1. V100R008C00
A larger value of BTS3900 LTE: Radio L
Hys results in a V100R003C00
lower probability of
triggering event B1
and therefore a
lower probability of
handover. A large
value may affect
user experience. A
smaller value of
Hys leads to a
higher probability of
triggering event B1.
A small value may
cause handover
decision errors and
ping-pong
handovers.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
GERAN cell, and a V100R003C00
smaller value leads
to a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
GERAN cell, and a V100R003C00
smaller value
results in a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
GERAN cell, and a V100R003C00
smaller value leads
to a higher
probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handovers to BTS3900 LTE: Radio L
UTRAN, and a V100R003C00
smaller value
results in a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handovers to BTS3900 LTE: Radio L
UTRAN, and a V100R003C00
smaller value
results in a higher
probability.

The entering
condition of event
B1 is as follows: Mn
+ Ofn - Hys >
Thresh.
Mn is the
measurement value
of the neighboring
cell. Ofn is the
frequency-specific
offset of the
neighboring cell.
Thresh is the
threshold for event
B1. Hys is the
hysteresis for event BTS3900:
B1. V100R008C00
A larger value of BTS3900 LTE: Radio L
Hys results in a V100R003C00
lower probability of
triggering event B1
and therefore a
lower probability of
handover. A large
value may affect
user experience. A
smaller value of
Hys leads to a
higher probability of
triggering event B1.
A small value may
cause handover
decision errors and
ping-pong
handovers.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handovers to BTS3900 LTE: Radio L
UTRAN, and a V100R003C00
smaller value
results in a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
UTRAN cell, and a V100R003C00
smaller value leads
to a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
UTRAN cell, and a V100R003C00
smaller value leads
to a higher
probability.
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

A larger value of
this parameter
results in a lower
probability of
reporting event A3
and accordingly a
smaller number of
UEs that report the BTS3900:
related V100R009C00
measurement BTS3900 LTE: Radio L
results. In this case, V100R009C00
the algorithm
performance is
poorer but signaling
overheads are less.
A smaller value of
this parameter
results in opposite
effects.

A larger value of
this parameter
results in a lower
probability of BTS3900:
meeting entering V100R009C00
and leaving BTS3900 LTE: Radio L
conditions for event V100R009C00
A3 or A6. A smaller
value of this
parameter results in
opposite effects.
A larger value of
this parameter
results in a lower
probability of BTS3900:
meeting entering V100R009C00
and leaving BTS3900 LTE: Radio L
conditions for event V100R009C00
A3 or A6. A smaller
value of this
parameter results in
opposite effects.

A larger value of
this parameter
results in a larger
number of cells to
be included in a
measurement
report, which
facilitates more
accurate evaluation
on interferences
from neighboring
cells, improves the
BTS3900:
performance of
V100R009C00
CEUs, and
BTS3900 LTE: Radio L
increases the
V100R009C00
average throughput
of CEUs. However,
the power
consumption of
UEs due to
measurements and
the overheads for
measurement
reporting are
increased. A smaller
value of this
parameter results in
opposite effects.

A larger value of
this parameter
results in more
power consumption
BTS3900:
of UEs but more
V100R009C00
timely reflection of
BTS3900 LTE: Radio L
the interferences
V100R009C00
from neighboring
cells on CEUs. A
smaller value of this
parameter results in
opposite effects.
A larger value of
this parameter
results in a longer
interval between
periodic
measurement
reports and
accordingly a lower
frequency that UEs
report the related
measurement
results. In this case, BTS3900:
the capability of UE V100R009C00
location tracing and BTS3900 LTE: Radio L
the average V100R009C00
throughput of CEUs
decrease. A smaller
value of this
parameter results in
opposite effects
and in addition,
frequent reporting
of measurement
results increases
the power
consumption of
UEs.

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
A larger value of
this parameter
results in a lower
probability of
reporting event A6
in CA scenarios and
accordingly a
smaller number of
BTS3900:
UEs that report the
V100R009C00
related
BTS3900 LTE: Radio L
measurement
V100R009C00
results. In this case,
the algorithm
performance is
poorer but signaling
overheads are less.
A smaller value of
this parameter
results in opposite
effects.

A larger value of
this parameter
results in a larger
number of cells to
be included in each
periodic
measurement
report, which
facilitates more
accurate evaluation
on interferences
from neighboring BTS3900:
cells and V100R010C10
neighboring cell BTS3900 LTE: Radio L
coverage. However, V100R010C10
the power
consumption of
UEs due to
measurements and
the signaling
overhead for
measurement
reporting increase.
A smaller value of
this parameter
results in the
opposite effects.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
If this parameter is
set to BOTH, UEs
report both the
measured RSRP
and RSRQ values
and the power
consumption of
UEs due to
measurements and
signaling overhead
of measurement BTS3900:
reporting are large. V100R010C10
If this parameter is BTS3900 LTE: Radio L
set to V100R010C10
SAME_AS_TRIG_
QUAN, UEs report
only measured
RSRP or RSRQ
values and the
power consumption
of UEs due to
measurements and
signaling overhead
of measurement
reporting are small.

A larger value of
this parameter
results in a larger
number of cells to
be included in each
periodic
measurement
report, which
facilitates more
accurate evaluation
on interferences
from neighboring BTS3900:
cells and V100R008C01
neighboring cell BTS3900 LTE: Radio L
coverage. However, V100R008C01
the power
consumption of
UEs due to
measurements and
the signaling
overhead for
measurement
reporting increase.
A smaller value of
this parameter
results in the
opposite effects.
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

If this parameter is
set to BOTH, UEs
report both the
measured RSRP
and RSRQ values
and the power
consumption of
UEs due to
measurements and
signaling overhead
of measurement BTS3900:
reporting are large. V100R010C10
If this parameter is BTS3900 LTE: Radio L
set to V100R010C10
SAME_AS_TRIG_
QUAN, UEs report
only measured
RSRP or RSRQ
values and the
power consumption
of UEs due to
measurements and
signaling overhead
of measurement
reporting are small.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
The triggering
condition of event
A1 is as follows: Ms
- Hys > Thresh.
The triggering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Ms is the
measurement value
BTS3900:
of the serving cell,
V100R008C00
Hys is the
BTS3900 LTE: Radio L
hysteresis for event
V100R003C00
A1 or A2 contained
in the measurement
configuration, and
Thresh is the
threshold for the
particular event. A
larger value of Hys
results in a lower
probability of
triggering event A1
or A2.

The time-to-trigger
helps reduce the
number of inter-
frequency
measurements and
prevent
unnecessary inter-
BTS3900:
frequency
V100R008C00
measurements. The
BTS3900 LTE: Radio L
larger the value of
V100R003C00
this parameter, the
smaller the average
number of inter-
frequency
measurements, and
the higher the
probability of call
drops.
The entering
condition of event
A1 is as follows: Ms
- Hys > Thresh.
Thresh is the
threshold for the
event. A larger
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A1 V100R003C00
and hence causes
a lower probability
of stopping inter-
frequency
measurements. A
smaller value of
Thresh leads to a
higher probability.

The entering
condition of event
A1 is as follows: Ms
- Hys > Thresh.
Thresh is the
threshold for the
event. A larger
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A1 V100R003C00
and hence causes
a lower probability
of stopping inter-
frequency
measurements. A
smaller value of
Thresh leads to a
higher probability.
The entering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Thresh is the
threshold for the
event. A smaller
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A2 V100R003C00
and hence causes
a lower probability
of starting inter-
frequency
measurements. A
larger value of
Thresh leads to a
higher probability.

The entering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Thresh is the
threshold for the
event. A smaller
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A2 V100R003C00
and hence causes
a lower probability
of starting inter-
frequency
measurements. A
larger value of
Thresh leads to a
higher probability.
A larger value of
this parameter
results in a lower
probability of
triggering event A4
and hence causes
a lower probability
of handover. A large BTS3900:
value may affect V100R008C00
user experience. A BTS3900 LTE: Radio L
smaller value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A4. A small value
may cause
handover decision
errors and ping-
pong handovers.

A larger value of
this parameter
results in a lower
probability of
triggering event A4
and hence causes
a lower probability
of handover. A large BTS3900:
value may affect V100R008C00
user experience. A BTS3900 LTE: Radio L
smaller value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A4. A small value
may cause
handover decision
errors and ping-
pong handovers.
A larger value of
this parameter
results in a lower
probability of
triggering event A4
and hence causes
a lower probability
of handover. A large BTS3900:
value may affect V100R008C00
user experience. A BTS3900 LTE: Radio L
smaller value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A4. A small value
may cause
handover decision
errors and ping-
pong handovers.

A larger value of
this parameter
results in a lower
probability of
handover to an
BTS3900:
inter-frequency cell,
V100R008C00
a smaller average
BTS3900 LTE: Radio L
number of
V100R003C00
handovers, and a
higher call drop
rate. A smaller
value of this
parameter leads to
the opposite effect.

A larger value of
this parameter
results in a lower
probability of
triggering event A4
and hence causes
a lower probability
of handover. A large BTS3900:
value may affect V100R008C00
user experience. A BTS3900 LTE: Radio L
smaller value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A4. A small value
may cause
handover decision
errors and ping-
pong handovers.
A larger value of
this parameter
results in a lower
probability of
triggering event A4
and hence causes
a lower probability
of handover. A large BTS3900:
value may affect V100R008C00
user experience. A BTS3900 LTE: Radio L
smaller value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A4. A small value
may cause
handover decision
errors and ping-
pong handovers.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

A larger value of
this parameter
results in a lower
probability of
triggering event A3
and therefore a BTS3900:
lower probability of V100R008C00
handover. A smaller BTS3900 LTE: Radio L
value of this V100R003C00
parameter leads to
a higher probability
of triggering event
A3 and therefore a
higher probability of
handover.
The entering
condition of event
A1 is as follows: Ms
- Hys > Thresh.
Thresh is the
threshold for the
event. A larger
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A1 V100R003C00
and hence causes
a lower probability
of stopping inter-
frequency
measurements. A
smaller value of
Thresh leads to a
higher probability.

The entering
condition of event
A2 is as follows: Ms
+ Hys < Thresh.
Thresh is the
threshold for the
event. A smaller
value of Thresh BTS3900:
results in a lower V100R008C00
probability of BTS3900 LTE: Radio L
triggering event A2 V100R003C00
and hence causes
a lower probability
of starting inter-
frequency
measurements. A
larger value of
Thresh leads to a
higher probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
A larger value of
this parameter
results in a smaller
range of cell center
users to be
selected, a larger
range of cell edge
users to be
selected, and a
lower probability of
triggering MLB in
large-coverage or
same-coverage
cells. A smaller
BTS3900:
value of this
V100R008C01
parameter results in
BTS3900 LTE: Radio L
a larger range of
V100R008C01
cell center users to
be selected, a
smaller range of cell
edge users to be
selected, and a
lower probability of
triggering MLB in
small-coverage
cells. If this
parameter is set to
a large or small
value, the average
UE throughput in
high-load cells is
affected.

This parameter
specifies the
threshold of event
A5 for triggering
coverage-based
inter-frequency
handovers. A small
value of this
parameter leads to
a low probability of
triggering event A5 BTS3900:
and thereby V100R010C00
causing a high BTS3900 LTE: Radio L
probability of V100R010C00
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event A5
and thereby
causing a high
probability of
performing inter-
frequency
handovers.
This parameter
specifies the
threshold of event
A5 for triggering
coverage-based
inter-frequency
handovers. A small
value of this
parameter leads to
a low probability of
triggering event A5 BTS3900:
and thereby V100R010C00
causing a high BTS3900 LTE: Radio L
probability of V100R010C00
delayed handovers.
A large value of this
parameter leads to
a high probability of
triggering event A5
and thereby
causing a high
probability of
performing inter-
frequency
handovers.

The event A4
threshold for
triggering service-
request-based
inter-frequency
handover is
independent from
that for triggering
MLB. A small value
of this parameter
increases the
possibility of BTS3900:
triggering a V100R010C00
handover while a BTS3900 LTE: Radio L
large value of this V100R010C00
parameters reduces
the possibility of
triggering a
handover.Set this
parameter properly
based on the
network to reduce
service drop rate,
improve user
experience, and
optimize network
condition.
The event A4
threshold for
triggering service-
request-based
inter-frequency
handover is
independent from
that for triggering
MLB. A small value
of this parameter
increases the
possibility of BTS3900:
triggering a V100R010C00
handover while a BTS3900 LTE: Radio L
large value of this V100R010C00
parameters reduces
the possibility of
triggering a
handover.Set this
parameter properly
based on the
network to reduce
service drop rate,
improve user
experience, and
optimize network
condition.
probability of
triggering event A5
and therefore a
lower probability of
selecting UEs for
MLB. A larger value
of this parameter
results in a higher
probability of
triggering event A5
and and therefore a
higher probability of
triggering inter-
frequency
handovers.
However, a larger
value of this
BTS3900:
parameter may
V100R010C10
result in worse
BTS3900 LTE: Radio L
signal quality of
V100R010C10
UEs after being
transferred in multi-
frequency inter-
eNodeB scenario,
reducing the
resource usage. A
proper value of this
parameter helps to
increase the
resource usage
without affecting the
performance of
MLB. Set this
parameter based
on the distance
between inter-
frequency
eNodeBs. The
probability of
triggering event A5
and therefore a
lower probability of
selecting UEs for
MLB. A larger value
of this parameter
results in a higher
probability of
triggering event A5
and and therefore a
higher probability of
triggering inter-
frequency
handovers.
However, a larger
value of this
BTS3900:
parameter may
V100R010C10
result in worse
BTS3900 LTE: Radio L
signal quality of
V100R010C10
UEs after being
transferred in multi-
frequency inter-
eNodeB scenario,
reducing the
resource usage. A
proper value of this
parameter helps to
increase the
resource usage
without affecting the
performance of
MLB. Set this
parameter based
on the distance
between inter-
frequency
eNodeBs. The
A smaller value of
this parameter
results in a higher
probability of
triggering event A4
related to UL-
quality-based inter-
frequency
handovers and a
higher probability of
ping-pong BTS3900:
handovers. A larger V100R010C10
value of this BTS3900 LTE: Radio L
parameter results in V100R010C10
a lower probability
of triggering event
A4 related to UL-
quality-based inter-
frequency
handovers and a
lower probability of
ping-pong
handovers,
affecting user
experience.

A larger value of
this parameter
results in a lower
probability of
triggering event A1
and stopping inter- BTS3900:
frequency V100R010C10
measurements. A BTS3900 LTE: Radio L
smaller value of this V100R010C10
parameter results in
a higher probability
of triggering event
A1 and stopping
inter-frequency
measurements.

A smaller value of
this parameter
results in a lower
probability of
triggering event A2
and starting inter- BTS3900:
frequency V100R010C10
measurements. A BTS3900 LTE: Radio L
larger value of this V100R010C10
parameter results in
a higher probability
of triggering event
A2 and starting
inter-frequency
measurements.
A larger value of
this parameter
results in a lower
probability for
triggering event A4
and hence causes
a lower probability BTS3900:
of handovers. A V100R010C10
smaller value of this BTS3900 LTE: Radio L
parameter results in V100R010C10
a higher probability
for triggering event
A4, and may cause
incorrect handover
decision-making
and ping-pong
handovers.

A larger value of
this parameter
results in a lower
probability for
triggering event A4
and hence causes
a lower probability BTS3900:
of handovers. A V100R010C10
smaller value of this BTS3900 LTE: Radio L
parameter results in V100R010C10
a higher probability
for triggering event
A4, and may cause
incorrect handover
decision-making
and ping-pong
handovers.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
A larger value of
this parameter
makes it more
difficult to trigger
event A3, which
delays handovers
BTS3900:
and affects user
V100R008C00
experience. A
BTS3900 LTE: Radio L
smaller value of this
V100R003C00
parameter makes it
easier to trigger
event A3, which
increases handover
decision errors and
ping-pong
handovers.

A positive value of
this parameter
results in a
relatively low
probability of
triggering event A3
and therefore a
relatively low BTS3900:
probability of V100R008C00
handover. A BTS3900 LTE: Radio L
negative value of V100R003C00
this parameter
leads to a relatively
high probability of
triggering event A3
and therefore a
relatively high
probability of
handover.

This parameter
helps reduce the
average number of
handovers and the
number of
unexpected
handovers, and
BTS3900:
hence prevents
V100R008C00
unnecessary
BTS3900 LTE: Radio L
handovers. A larger
V100R003C00
value of this
parameter results in
a smaller average
number of
handovers, but it
also leads to a
higher risk of call
drops.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
This parameter has
been set in the
network planning,
and no optimization
BTS3900:
is required. It is
V100R008C00
recommended that
BTS3900 LTE: Radio L
this parameter be
V100R003C00
set to a value in
accordance with the
actual emergency
call capability of the
operator.

When this
parameter is set to
ON, the eNodeB
identifies
emergency UEs
and gives them
preferential
treatment in
admission and
congestion control.
The eNodeB can
hand over
emergency UEs to
a neighboring cell
even though the BTS3900:
neighboring cell is V100R008C00
configured with the BTS3900 LTE: Radio L
handover V100R003C00
prohibition flag, is
blacklisted, in the
handover restriction
list, or belongs to a
PLMN to which a
handover is not
allowed. When this
parameter is set to
OFF, the eNodeB
cannot identify
emergency UEs,
and provides the
same services for
emergency UEs as
common UEs.
When this
parameter is set to
ON, the eNodeB
supports
emergency calls
initiated by UEs in
the limited service
state and will notify
UEs of this fact
using the IE ims-
EmergencySupport-
r9 with the value
true in SIB1
delivered by the
BTS3900:
eNodeB. When this
V100R008C00
parameter is set to
BTS3900 LTE: Radio L
OFF, the eNodeB
V100R003C00
does not support
such emergency
calls and does not
deliver the SIB1
containing the IE
ims-
EmergencySupport-
r9. In this case,
UEs select or
reselect a cell in
any RAT that
support such
emergency calls
and then camp on
the cell.
In the initial stage of
the network
planning, the
setting of this
parameter is
consistent with the
configurations in
the evolved packet
core (EPC).
If the EmcEnable
parameter is set to
ON and the ARP of
a bearer set up by a
UE is the same as BTS3900:
the V100R008C00
EmcDedicatedBear BTS3900 LTE: Radio L
erARP parameter, V100R003C00
the eNodeB
identifies the UE as
an emergency UE.
In this case, UE
throughput cannot
exceed the upper
limit that is
configured in the
EPC, except in
admission control,
congestion control,
and mobility
management
procedures.
In the initial stage of
the network
planning, the
setting of this
parameter is
consistent with the
configurations in
the evolved packet
core (EPC).
If the EmcEnable
parameter is set to
ON and the ARP of
a bearer set up by a
UE is the same as BTS3900:
the V100R008C00
EmcDefaultBearerA BTS3900 LTE: Radio L
RP parameter, the V100R003C00
eNodeB identifies
the UE as an
emergency UE. In
this case, UE
throughput cannot
exceed the upper
limit that is
configured in the
EPC, except in
admission control,
congestion control,
and mobility
management
procedures.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R001C01

If this parameter is
set to ON, the
eNodeB adjusts the
SRI period based
on the SRI
algorithm so that
BTS3900:
the number of
V100R008C00
admitted UEs can
BTS3900 LTE: Radio L
reach the cell
V100R003C00
capacity. If this
parameter is set to
OFF, the maximum
number of admitted
UEs depends on
the user-defined
SRI period.
If this parameter is
set to
LCG_PROFILE_1
or
LCG_PROFILE_2,
non-GBR services
are classified into
high-priority non- BTS3900:
GBR services and V100R008C00
low--priority non- BTS3900 LTE: Radio L
GBR services. QoS V100R003C00
of high-priority non-
GBR services is
better ensured, but
there is a risk that
the QoS of low-
priority non-GBR
services will not be
ensured.
BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R005C00
If this switch is
turned off and the
interlocking
modification
function on the
CME is not used,
the configuration
data of inter-
eNodeB
neighboring cells
cannot be updated
on the local
eNodeB. As a
BTS3900:
result, the handover
V100R008C00
success rate
BTS3900 LTE: Radio L
decreases.
V100R005C00
If this switch is
turned on and the
interlocking
modification
function on the
CME is used, the
configuration data
modified by using
the CME may be
lost or become
abnormal during the
automatic eNodeB
configuration
update.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R008C00

The value of this

parameter has a BTS3900:
positive correlation V100R008C00
with the RRC BTS3900 LTE: Radio L
connection V100R008C00
reestablishment
success rate.
A smaller value of
this parameter
results in a shorter
time for determining
to remove an X2
link, thereby
increasing the
possibility that the
X2 links are
mistakenly
removed. As a
result, more X2 self-
setups are
triggered, thereby
increasing the X2
and S1 signaling
overheads. A larger BTS3900:
value of this V100R008C00
parameter results in BTS3900 LTE: Radio L
a longer time for V100R008C00
determining to
remove an X2 link
and a lower
probability that the
X2 links are
mistakenly
removed. However,
this decreases the
efficiency of
removing redundant
X2 links. When this
parameter is set to
0, the neighbor
relationship-based
X2 automatic
removal does not
take effect.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
after the UE is
handed over from
E-UTRAN to
UTRAN or GERAN,
then the handover
from UTRAN or
GERAN to E-
UTRAN fails due to
the absence of the
UE's E-UTRAN
capability.
Therefore, the
success rate of
handovers from
UTRAN or GERAN
to E-UTRAN is
affected.
BTS3900:
If this parameter is
V100R008C00
set to ON, the
BTS3900 LTE: Radio L
eNodeB delivers
V100R008C00
the EUTRAN
capability of the UE
to the UTRAN or
GERAN during a
handover from E-
UTRAN to UTRAN
or GERAN. Even if
the UTRAN or
GERAN did not
query the UE's
EUTRAN capability
after the UE is
handed over from
E-UTRAN to
UTRAN or GERAN,
the UTRAN or
GERAN can obtain
the UE's EUTRAN
If this parameter is
set to ON and
MMEs of operators
that share the
eNodeB are
configured with the
same MMEC, a UE
may be mistakenly
paged at a
probability of 1/
(2^32). BTS3900:
If this parameter is V100R008C00
set to OFF and BTS3900 LTE: Radio L
MMEs of operators V100R008C00
that share the
eNodeB are
configured with the
same MMEC, the
status of the S1
interfaces to the
MMEs sharing the
same MMEC is
faulty and an S1
interface fault alarm
is reported.

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R009C00
none BTS3900 LTE: Radio L
V100R009C00
incompatibility
issues.
IdleCsfbRedirectOp
tSwitch: If this
option is selected,
the number of
signaling
exchanges for
CSFB decreases
and the delay of
CSFB is also
shortened.
UlNasBufferSwitch:
If this option is
selected, the
eNodeB buffers
uplink NAS BTS3900:
messages sent by V100R009C00
the UE before the BTS3900 LTE: Radio L
UE-associated V100R009C00
logical S1
connection is
available. Then, the
eNodeB sends this
message to the
MME after the UE-
associated logical
S1 connection is
set up. In this case,
the MME may
detect an
exception. In
addition, if the
number of uplink
NAS messages that
need to be buffered
is too large, the
If this parameter is
set to ON, a
neighbor relation
may be mistakenly
removed in
scenarios where
the cell is manually
activated or the S1
interface restores
after a short-time
S1 interface fault. BTS3900:
This may cause a V100R008C01
decrease of the BTS3900 LTE: Radio L
handover success V100R008C01
rate. If this
parameter is set to
OFF, the eNodeB
does not remove a
neighbor relation
based on the X2
interface update
message. This may
cause handover
failures in scenarios
with conflict PCIs.

BTS3900:
V100R008C00
none BTS3900 LTE: Radio L
V100R005C00
remains unchanged
if UEs are evenly
distributed.
In scenarios where
the MMEs are
overloaded and
UEs are unevenly
distributed with
more cell edge
users (CEUs) (such
UEs have a
relatively low RRC
connection setup
rate), the number of
RRC connection
setup procedures
drops, thereby BTS3900:
decreasing RRC V100R008C01
connection setup BTS3900 LTE: Radio L
failures and V100R008C01
possibly increasing
the RRC
connection setup
success rate.
In scenarios where
the MMEs are
overloaded and
UEs are unevenly
distributed with
more UEs near and
at medium
distances from the
cell center (such
UEs have a
relatively low RRC
connection setup
rate), the number of

A smaller value of
this parameter
results in that the
RRC connection is
released faster for a
UE and the service
drop rate may
BTS3900:
increase. A larger
V100R008C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R005C00
a higher probability
that the RRC
connection is
reestablished to the
local cell for a UE
but a slower RRC
connection release
for a UE.
If this parameter is
set to ON, the radio
resource overhead
increases for UE
inactivity detection.
The RRC BTS3900:
connection release V100R008C00
for the inactive UE BTS3900 LTE: Radio L
due to the RLF is V100R005C00
regarded as an
abnormal RRC
connection release,
therefore the
service drop rate
increases.

If this parameter is
set to ON, the
eNodeB detects
radio link status for
synchronized UEs.
If the radio link of a
synchronized UE is
abnormal, the
resynchronization
attempts, access
attempts, and radio
link reestablishment
attempts increase,
and the triggering BTS3900:
duration for V100R008C01
abnormal UE BTS3900 LTE: Radio L
release is relatively V100R008C01
short.
If this parameter is
set to OFF, the
eNodeB does not
detect radio link
status for
synchronized UEs,
and the triggering
duration for
abnormal UE
release is relatively
long when the radio
link for the UE is
abnormal.
A larger value of
this parameter
results in a longer
paging
retransmission BTS3900:
delay if the MME V100R008C01
uses the parameter BTS3900 LTE: Radio L
value as the paging V100R008C01
retransmission
period. A smaller
value of this
parameter results in
an opposite effect.
after the UE is
handed over to the
target cell. This can
prevent throughput
decreases to zero
caused by
continuous
scheduling each
time with 3 resource
blocks (RBs) in the
uplink and increase
the uplink
throughput. This
also adds 8 bits to
the size of the
RRCConnectionRe
configuration
BTS3900:
message, thereby
V100R009C00
increasing the
BTS3900 LTE: Radio L
probability of
V100R009C00
fragmenting the
RRCConnectionRe
configuration
message. In this
case, the handover
success rate
decreases and the
service drop rate
increases.
If this parameter is
set to OFF, a UE
does not receive
the power
headroom
configuration, and
therefore cannot
report the PHR in
time after the UE is
If the
RimUtranSwitch
option is selected,
lightly loaded E-
UTRAN cells are
preferentially
selected during
UTRAN-to-
EUTRAN
handovers and
redirections,
increasing the
handover
preparation BTS3900:
success rate and V100R009C00
reducing ping-pong BTS3900 LTE: Radio L
handovers. V100R009C00
</p><p>If the
EcoSwitch option is
selected, the
eCoordinator
adjusts the WiFi
transmit power and
access threshold
based on the E-
UTRAN cell load
information,
achieving load
balancing between
WLAN and LTE
networks.

SupportS1UeCapM
atchMsg: If this
option is selected,
access delay
increases when the
UE RADIO
CAPABILITY
MATCH REQUEST
message reaches
the eNodeB earlier BTS3900:
than the INITIAL V100R009C00
CONTEXT SETUP BTS3900 LTE: Radio L
REQUEST V100R009C00
message, affecting
user experience of
service
establishment. If
this option is
deselected, user
experience of
service
establishment is not
affected.
 BTS3900:
V100R009C00
none BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
none BTS3900 LTE: Radio L
V100R009C00
success rate rises,
the number of RRC
connection
reestablishments
drops, and the
service drop rate
decreases.
NasSecProcSwitch:
If this option is
selected, the
eNodeB fills the IE
from octet 1. If this
option is
deselected, the
eNodeB fills the IE
from octet 2.
AntennaFullConfigS BTS3900:
witch: If the V100R009C00
handover command BTS3900 LTE: Radio L
message contains V100R009C00
the IE fullconfig-r9,
the UE resets
PDCP, RLC, MAC,
and PHY settings to
their default values.
This causes packet
loss during the
handover and
affects UE
performance.
DrxConfigMsgSwitc
h: If this option is
deselected, there is
no impact except a
0.2% decrease in
the success rate of
RRC connection

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
selected, the
eNodeB can
automatically
remove X2
interfaces with low
usage. This
prevents X2
interfaces with low
usage from
occupying the X2
specification. If this
option is
deselected, the
eNodeB cannot
automatically
remove X2
interfaces with low BTS3900:
usage. As a result, V100R009C00
new X2 interfaces BTS3900 LTE: Radio L
cannot be V100R009C00
configured if the
total number of X2
interfaces
configured for an
eNodeB has
reached its
maximum. In
addition, if the local
eNodeB removes
the X2 interface,
the X2 interface
negotiation may fail
on the peer
eNodeB, and X2
fault alarms are
reported on the
peer eNodeB.
A smaller value of
this parameter
results in a higher
probability of
meeting the
conditions for X2
automatic removal
based on X2 fault
and therefore a
higher probability
that X2 interfaces
are mistakenly
removed and then
automatically set
up. A larger value of
this parameter BTS3900:
results in a lower V100R009C00
probability of BTS3900 LTE: Radio L
meeting the V100R009C00
conditions for X2
automatic removal
based on X2 fault
and therefore lower
efficiency of
removing faulty X2
interfaces. As a
result, new X2
interfaces cannot
be configured if the
total number of X2
interfaces
configured for an
eNodeB has
reached its
maximum.
A smaller value of
this parameter
results in a higher
probability of
meeting the
conditions for X2
automatic removal
based on X2 usage
and therefore a
higher probability
that X2 interfaces
are mistakenly
removed and then
automatically set
up. A larger value of
this parameter
BTS3900:
results in a lower
V100R009C00
probability of
BTS3900 LTE: Radio L
meeting the
V100R009C00
conditions for X2
automatic removal
based on X2 usage
and therefore lower
efficiency of
removing X2
interfaces with low
usage. As a result,
new X2 interfaces
cannot be
configured if the
total number of X2
interfaces
configured for an
eNodeB has
reached its
maximum.
A smaller value of
this parameter
results in a lower
probability of
meeting the
conditions for X2
automatic removal
based on X2 usage.
However, this
decreases the
efficiency of
removing X2
interfaces with low
usage. As a result,
new X2 interfaces
cannot be
configured if the BTS3900:
total number of X2 V100R009C00
interfaces BTS3900 LTE: Radio L
configured for an V100R009C00
eNodeB has
reached its
maximum. A larger
value of this
parameter results in
a higher probability
of meeting the
conditions for X2
automatic removal
based on X2 usage
and therefore a
higher probability
that X2 interfaces
are mistakenly
removed and then
automatically set
up.
A smaller value of
this parameter
results in a lower
probability of
meeting the
conditions for X2
automatic removal
based on X2 usage.
However, this
decreases the
efficiency of
removing X2
interfaces with low
usage. As a result,
new X2 interfaces
cannot be
configured if the BTS3900:
total number of X2 V100R009C00
interfaces BTS3900 LTE: Radio L
configured for an V100R009C00
eNodeB has
reached its
maximum. A larger
value of this
parameter results in
a higher probability
of meeting the
conditions for X2
automatic removal
based on X2 usage
and therefore a
higher probability
that X2 interfaces
are mistakenly
removed and then
automatically set
up.
allowed to enter
periodic
measurement gap.
During the gap,
UEs are not
scheduled and
therefore the voice
service quality
decreases.
If this parameter is
set to DISABLE,
VoIP UEs are
allowed to enter
periodic
measurement gap
and the voice
service quality is
BTS3900:
not affected.
V100R010C00
However, for a UE
BTS3900 LTE: Radio L
that has already
V100R010C00
entered the
measurement gap
and then initiates
VoIP services
during the gap, the
eNodeB
automatically
removes the
periodic inter-
frequency and inter-
RAT measurements
for the UE. The
number of RRC
connection
reconfiguration
messages over the
Uu interface
increases and the
BTS3900:
V100R010C00
none BTS3900 LTE: Radio L
V100R010C00
BBP, each cell
established on the
BBP must serve
more UEs
performing data
transmission. In this
situation, more
scheduling request
indicators (SRIs),
channel quality
indicators (CQIs),
and sounding
reference signal
(SRS) resources
are consumed, and
the PDCCH,
PDSCH, and BTS3900:
PUSCH are V100R010C00
required to support BTS3900 LTE: Radio L
more UEs. As a V100R010C00
result, user
experience
deteriorates. For
example, the
average user
throughput
decreases. In
addition, the
increase in the
number of
synchronized UEs
per cell results in
stronger
interference in the
cell. As a result, the
average spectral
efficiency in the

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
A smaller value of
this parameter
results in a smaller
number of X2 setup
attempts after X2
setup failure. In this
situation, the
number of S1-
based handovers
increases,
occupying a large
BTS3900:
amount of S1
V100R010C10
resource. A larger
BTS3900 LTE: Radio L
value of this
V100R010C10
parameter results in
a larger number of
X2 self-setup
failures. In this
situation, the local
eNodeB may
repeatedly attempt
to set up the X2
interface, affecting
the service
processing on the
eNodeB.
A small value of this
parameter may
result in repeated
X2 setup failures.
This is because the
current
measurement
period ends before
the number of X2
setup failures can
reach the
X2SetupFailureNu
mThd parameter
value within a
measurement
period. In this
situation, the
BTS3900:
function of
V100R010C10
restricting X2 setup
BTS3900 LTE: Radio L
request based on
V100R010C10
the number of X2
setup failures does
not actually take
effect. If this
parameter is set to
a large value, the
local eNodeB may
not attempt to set
up an X2 interface
after several X2
setup failures. In
this situation, the
number of S1-
based handovers
increases,
occupying a large
amount of S1
resource.
BASED_ON_EX2F
AULT: If this option
is selected, the
eNodeB can
automatically
remove faulty eX2
interfaces. The eX2
automatic removal
function based on
X2 fault cannot
identify the fault
type. If an eX2
interface is faulty
throughout a certain
time, the eNodeB BTS3900:
automatically V100R010C10
removes the eX2 BTS3900 LTE: Radio L
interface. If this V100R010C10
option is
deselected, the
eNodeB cannot
automatically
remove faulty eX2
interfaces. As a
result, new eX2
interfaces cannot
be configured if the
total number of eX2
interfaces
configured for an
eNodeB has
reached its
maximum.
A smaller value of
this parameter
results in a higher
probability of
meeting the
conditions for eX2
automatic removal
based on eX2 fault
and therefore a
higher probability
that eX2 interfaces
are mistakenly
removed and then
automatically set
up. A larger value of
this parameter BTS3900:
results in a lower V100R010C10
probability of BTS3900 LTE: Radio L
meeting the V100R010C10
conditions for eX2
automatic removal
based on eX2 fault
and therefore lower
efficiency of
removing faulty eX2
interfaces. As a
result, new eX2
interfaces cannot
be configured if the
total number of eX2
interfaces
configured for an
eNodeB has
reached its
maximum.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
Assume that the
X2SonSetupTimer
parameter is
unchanged, a
smaller value of the
X2SonSetupNumTh
d parameter results
in a higher
probability of X2
self-setup. In this
situation, if an X2
interface is set up,
its usage may not
BTS3900:
be high, and new
V100R010C10
X2 interfaces may
BTS3900 LTE: Radio L
not be set up. A
V100R010C10
larger value of this
parameter results in
a lower probability
of X2 self-setup. In
this case, an X2
interface may not
be set up during a
long period, and the
number of S1-
based handovers
increases,
occupying a large
amount of S1
resource.
Assume that the
X2SonSetupNumTh
d parameter is
unchanged, a
smaller value of the
X2SonSetupTimer
parameter results in
a higher probability
of X2 self-setup. In
this situation, if an
X2 interface is set
up, its usage may
not be high, and
BTS3900:
new X2 interfaces
V100R010C10
may not be set up.
BTS3900 LTE: Radio L
A larger value of
V100R010C10
this parameter
results in a lower
probability of X2
self-setup. In this
case, an X2
interface may not
be set up during a
long period, and the
number of S1-
based handovers
increases,
occupying a large
amount of S1
resource.

If this parameter is
set to ON, the
eNodeB proactively
reconfigures the AS
BTS3900:
security key after
V100R010C10
an X2-based
BTS3900 LTE: Radio L
handover,
V100R010C10
increasing the
number of Uu
signaling messages
and the probability
of service drops.
If this switch is on,
the eNodeB can
add frequencies of
different telecom
BTS3900:
operators in RAN
V100R010C10
sharing scenarios.
BTS3900 LTE: Radio L
If this switch is off,
V100R010C10
the eNodeB can
add frequencies of
only the telecom
operator of the
serving cell.

On networks with
repeated access
failures, a smaller
value of this
parameter results in
a higher probability
of triggering RRC
connection
penalties and less
resource
consumption for UE
access, but longer
delay for the BTS3900:
affected UEs to re- V100R010C10
access the BTS3900 LTE: Radio L
networks. V100R010C10
On such networks,
a larger value of
this parameter
results in a lower
probability of
triggering RRC
connection
penalties. However,
more frequent UE
access causes
consumption of
more network
resources.
If this parameter is
set to ON, the
eNodeB does
support the function
of checking RLC or
PDCP parameters
before and after the
dynamic update of
the QCI value. This
may cause a
decrease in the E-
RAB modification
success rate, but
BTS3900:
prevents packet
V100R010C10
size from being
BTS3900 LTE: Radio L
changed because
V100R010C10
of parameter setting
changes.</p><p>If
this parameter is
set to OFF, the E-
RAB modification
success rate does
not decrease.
However, there is a
possibility of packet
size change
because the
settings of RLC and
PDCP parameters
are changed.
AbnormalUeHandle
Switch: If some UEs
in the network do
not support some
features and
thereby network
KPIs are affected,
selecting
AbnormalUeHandle
Switch can disable
related features on
UEs and therefore
the KPIs are
improved.
UltraFlashCsfbCom BTS3900:
OptSw: If this V100R010C10
option is deselected BTS3900 LTE: Radio L
and a UE does not V100R010C10
support ultra-flash
CSFB, the UE fails
to perform ultra-
flash CSFB and
then initiates a
standardized CSFB
procedure, which
extends latency or
causes a service
drop, affecting user
experience. If this
option is selected,
the preceding
incompatibility risk
can be avoided.

BTS3900:
V100R010C10
none BTS3900 LTE: Radio L
V100R010C10
OTHER_S1_SCTP
_ABORT_SMOOTH
_SW: If this option
is selected, the
ABORT message
that the MME sends
to the eNodeB is
smoothed by the
eNodeB. In this
BTS3900:
case, the S1
V100R010C10
interface status on
BTS3900 LTE: Radio L
the eNodeB side is
V100R010C10
inconsistent with
that on the MME
side, affecting UE
access over the S1
interface. If this
option is
deselected, such an
impact does not
exist in the
preceding scenario.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

If the
SessionForMultiMA
Switch option is
selected, a single
MBMS session can BTS3900:
be broadcasted in V100R010C10
multiple MBSFN BTS3900 LTE: Radio L
areas, which V100R010C10
increases the
system processing
load and degrades
the maximum BBP
throughput.
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

The setting of this

parameter affects
the results of load
evaluation. A larger
value of this
BTS3900:
parameter results in
V100R009C00
a larger evaluation
BTS3900 LTE: Radio L
value of the QCI-
V100R009C00
specific PRB usage
of uplink services. A
smaller value of this
parameter results in
the opposite
effects.
The setting of this
parameter affects
the results of load
evaluation. A larger
value of this
parameter results in BTS3900:
a larger evaluation V100R009C00
value of the QCI- BTS3900 LTE: Radio L
specific PRB usage V100R009C00
of downlink
services. A smaller
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
The setting of this
parameter
BTS3900:
determines whether
V100R008C00
to automatically
BTS3900 LTE: Radio L
remove the X2
V100R008C00
interface when
removing the peer
eNodeB.

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
When this
parameter is set to
ON, UEs can enter
DRX mode, and the
power consumption
of UEs decreases. BTS3900:
The impact on the V100R008C00
radio network BTS3900 LTE: Radio L
performance V100R001C01
depends on DRX
parameter settings.
When dynamic
DRX is enabled,
this parameter is
invalid.

If this parameter is
set to ON and short
DRX cycles are
BTS3900:
configured, the
V100R008C00
service delay
BTS3900 LTE: Radio L
decreases. If this
V100R001C01
parameter is set to
OFF, short DRX
cycles do not take
effect.
This parameter,
together with the
OnDurationTimerSp
ecial,
DrxInactivityTimerS
pecial,
ShortDrxCycleSpeci
al, and
DrxShortCycleTimer
Special parameters,
affects the DRX
mechanism. If the
settings of other BTS3900:
DRX parameters V100R008C00
remain unchanged, BTS3900 LTE: Radio L
a smaller value of V100R002C00
this parameter
results in higher UE
power consumption
but shorter service
delay and better
KPIs such as the
service drop rate
and the handover
success rate, and a
larger value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleSpeci
al,
DrxInactivityTimerS
pecial,
ShortDrxCycleSpeci
al, and
DrxShortCycleTimer
Special parameters,
affects the DRX BTS3900:
mechanism. If the V100R008C00
settings of other BTS3900 LTE: Radio L
DRX parameters V100R002C00
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleSpeci
al,
OnDurationTimerSp
ecial,
ShortDrxCycleSpeci
al, and
DrxShortCycleTimer
Special parameters,
affects the DRX BTS3900:
mechanism. If the V100R008C00
settings of other BTS3900 LTE: Radio L
DRX parameters V100R002C00
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.

This parameter has

BTS3900:
little impact on the
V100R008C00
radio network
BTS3900 LTE: Radio L
performance, but it
V100R002C00
has an impact on
UEs.
This parameter,
together with the
LongDrxCycleSpeci
al,
OnDurationTimerSp
ecial,
DrxInactivityTimerS
pecial, and
DrxShortCycleTimer
Special parameters,
affects the DRX
BTS3900:
mechanism.
V100R008C00
If the settings of
BTS3900 LTE: Radio L
other DRX
V100R002C00
parameters remain
unchanged, a
smaller value of this
parameter results in
higher UE power
consumption but
shorter service
delay, and a larger
value of this
parameter results in
the opposite
effects.
This parameter,
together with the
LongDrxCycleSpeci
al,
DrxInactivityTimerS
pecial,
OnDurationTimerSp
ecial, and
ShortDrxCycleSpeci
al parameters,
affects the DRX BTS3900:
mechanism. If the V100R008C00
settings of other BTS3900 LTE: Radio L
DRX parameters V100R002C00
remain unchanged,
a smaller value of
this parameter
results in lower UE
power consumption
but longer service
delay, and a larger
value of this
parameter results in
the opposite
effects.

For intra-RAT ANR

measurement, a
smaller value of this
parameter results in
a lower CGI reading
success rate
because the sleep
BTS3900:
time is too short for
V100R008C00
UEs to complete
BTS3900 LTE: Radio L
ANR
V100R002C00
measurements; a
larger value of this
parameter results in
longer scheduling
delay causing that
the system QoS
requirements
cannot be met.
For inter-RAT ANR
measurement, a
smaller value of this
parameter results in
a lower CGI reading
success rate
because the sleep
BTS3900:
time is too short for
V100R008C00
UEs to complete
BTS3900 LTE: Radio L
ANR
V100R005C00
measurements; a
larger value of this
parameter results in
longer scheduling
delay causing that
the system QoS
requirements
cannot be met.

A smaller value of
this parameter
indicates a shorter
length of the DRX
inactivity timer for
ANR and a longer
sleep time for UEs
while they are
reading the CGI of
an unknown cell. BTS3900:
Therefore, a smaller V100R008C00
value of this BTS3900 LTE: Radio L
parameter results in V100R002C00
a higher CGI
reading success
rate, a lower service
drop rate due to
PCI confusion, but
a longer delay for
data scheduling. A
larger value of this
parameter results in
the opposite effect.
A smaller value of
this parameter
indicates a shorter
length of the DRX
inactivity timer for
ANR and a longer
sleep time for UEs
while they are
reading the CGI of
an unknown cell. BTS3900:
Therefore, a smaller V100R010C00
value of this BTS3900 LTE: Radio L
parameter results in V100R010C00
a higher CGI
reading success
rate, a lower service
drop rate due to
PCI confusion, but
a longer delay for
data scheduling. A
larger value of this
parameter results in
the opposite effect.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

IMS signaling and

low-delay services
are prioritized
during scheduling
but consume many
resources to ensure
BTS3900:
their QoS.
V100R008C00
Therefore, it is
BTS3900 LTE: Radio L
recommended that
V100R002C00
this parameter not
be set to
IMSSignalling or
LowDelay for TCP
services and non-
real-time streaming
services.
A smaller value of
this parameter
results in less uplink
bandwidth to be
allocated to
services with the BTS3900:
QCI when the V100R008C00
uplink transport BTS3900 LTE: Radio L
bandwidth or uplink V100R001C00
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
indicates a higher
scheduling priority
for downlink
services with the
corresponding
BTS3900:
extended QCI and
V100R008C00
results in a higher
BTS3900 LTE: Radio L
priority with which
V100R001C00
the data rate for
these services is
guaranteed
preferentially. A
smaller value of this
parameter results in
the opposite
effects.

A smaller value of
this parameter
indicates a smaller
uplink minimum
guaranteed bit rate
for services with the
QCI and results in
lower uplink
transport load and
estimated usage of BTS3900:
uplink licensed V100R008C00
traffic volume of BTS3900 LTE: Radio L
such services and a V100R002C00
larger number of
admitted services
when the downlink
transport bandwidth
or licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in lower
downlink transport
load and estimated
downlink usage of
licensed traffic
volume of services
BTS3900:
with the QCI and
V100R008C00
therefore a larger
BTS3900 LTE: Radio L
number of admitted
V100R002C00
services when the
downlink transport
bandwidth or
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.

A larger value of
this parameter
results in a higher
pre-allocation
weight and
BTS3900:
therefore a shorter
V100R008C00
pre-allocation delay
BTS3900 LTE: Radio L
for services with the
V100R002C00
specific extended
QCI. A smaller
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
this parameter
indicates a higher
prioritized bit rate of
logical channels for
services with the
specific extended
QCI and results in a
higher probability
that low-priority
services fail to be
scheduled. If this
parameter is set to
PBR_INFINITY and
the traffic volume of
services with the
QCI is high, there is
a risk that the
BTS3900:
services with QCIs
V100R008C00
indicating lower
BTS3900 LTE: Radio L
priorities will never
V100R003C00
be scheduled. A
smaller value of this
parameter indicates
a lower prioritized
bit rate of logical
channels for
services with the
QCI and results in a
lower probability
that low-priority
services fail to be
scheduled. If this
parameter is set to
BR_0_KBps, there
is a risk that the
services with the
corresponding QCI
will never be
A smaller value of
this parameter
indicates a higher
scheduling priority
for services with the
corresponding
extended QCI and BTS3900:
results in a higher V100R008C00
priority with which BTS3900 LTE: Radio L
the data rate for V100R005C00
these services is
guaranteed
preferentially. A
larger value of this
parameter results in
the opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
licensed traffic
congestion occurs.
As a result, the
delay and packet
loss rate increase.
However, the
transport load and
estimated usage of
licensed traffic
volume are not
measured based on
the actual traffic
volume. The
number of admitted
services is not
affected even if the
actual traffic volume
BTS3900:
of the services with
V100R008C00
the QCI is large.
BTS3900 LTE: Radio L
When this
V100R005C00
parameter is set to
NON_FLOW_CTRL
, the eNodeB does
not perform flow
control on services
with the QCI when
transport
congestion or
licensed traffic
congestion occurs.
As a result, the
delay and packet
loss rate do not
increase. However,
the transport load
and estimated
usage of licensed
traffic volume are
BTS3900:
V100R010C10
None. BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None. BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None. BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

If this parameter is
set to BTS3900:
REDIRECTION for V100R008C00
a bearer with a QCI BTS3900 LTE: Radio L
of 1, a call drop V100R003C00
occurs during a
redirection.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

If this parameter is
set to BTS3900:
REDIRECTION for V100R008C00
a bearer with a QCI BTS3900 LTE: Radio L
of 1, a call drop V100R003C00
occurs during a
redirection.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

A larger value leads

to better detection
performance of
CQIs transmitted
with data on
PUSCH and greater BTS3900:
downlink V100R008C00
throughput, but BTS3900 LTE: Radio L
more occupied V100R001C00
uplink resources
and lower uplink
throughput. A
smaller value leads
to the opposite
effects.
A larger value leads
to better detection
performance of RIs
transmitted with
data on PUSCH
and greater BTS3900:
downlink V100R008C00
throughput, but BTS3900 LTE: Radio L
more occupied V100R001C00
uplink resources
and lower uplink
throughput. A
smaller value leads
to the opposite
effects.

A larger value leads

to better detection
performance of
ACKs transmitted
with data on
PUSCH and greater BTS3900:
downlink V100R008C00
throughput, but BTS3900 LTE: Radio L
more occupied V100R001C00
uplink resources
and lower uplink
throughput. A
smaller value leads
to the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
A large value of this
parameter results in
a long delay of
services and a
failure to meet the BTS3900:
QCI requirement. A V100R008C00
small value of this BTS3900 LTE: Radio L
parameter leads to V100R003C00
a severe case of
PDCP data
discarding and
therefore low
throughput.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
leads to a higher
interference
resistance
capability, but a
larger number of
retransmissions
results in a longer
delay and lower
throughput. Set this
parameter to a
small value for
services with a high
requirement for the
delay and to a large
value for services
with a low
requirement for the
BTS3900:
delay. RRC
V100R008C00
connection re-
BTS3900 LTE: Radio L
establishment has a
V100R003C00
great impact on
Acknowledged
Mode (AM)
services, such as
packet-loss-
sensitive and delay-
insensitive TCP
services, because
packets in the
buffer are discarded
upon the re-
establishment.
Therefore, a large
value of this
parameter is
recommended,
reducing the
probability of RRC
leads to a higher
interference
resistance
capability, but a
larger number of
retransmissions
results in a longer
delay and lower
throughput. Set this
parameter to a
small value for
services with a high
requirement for the
delay and to a large
value for services
with a low
requirement for the
BTS3900:
delay. RRC
V100R008C00
connection re-
BTS3900 LTE: Radio L
establishment has a
V100R003C00
great impact on
Acknowledged
Mode (AM)
services, such as
packet-loss-
sensitive and delay-
insensitive TCP
services, because
packets in the
buffer are discarded
upon the re-
establishment.
Therefore, a large
value of this
parameter is
recommended,
reducing the
probability of RRC
To prevent buffer
overflow caused by
an excessively long
queue, the
transmitter sends
status reports
based on the data
BTS3900:
volume of
V100R008C00
transmitted PDUs. A
BTS3900 LTE: Radio L
small value of this
V100R003C00
parameter results in
a high frequency of
sending polling
PDUs. A large value
leads to high buffer
occupancy and a
slow speed of send
window movement.
To prevent buffer
overflow caused by
an excessively long
queue, the
transmitter sends
status reports
based on the data
BTS3900:
volume of
V100R008C00
transmitted PDUs. A
BTS3900 LTE: Radio L
small value of this
V100R003C00
parameter results in
a high frequency of
sending polling
PDUs. A large value
leads to high buffer
occupancy and a
slow speed of send
window movement.
To prevent the send
window from
changing to 0, the
transmitter initiates
status reporting
based on the
number of PDUs. A
small value (smaller
than or equal to
PollPdu_p16) of
this parameter
results in a high
frequency of
sending polling
BTS3900:
PDUs, a short
V100R008C00
round-trip time for
BTS3900 LTE: Radio L
RLC packets, and a
V100R003C00
high speed of send
window movement.
If the send window
is not 0, however, a
small value does
not increase the
transmission speed;
instead, it leads to
an excessive
number of status
reports. A large
value of this
parameter results in
a low speed of send
window movement.
To prevent the send
window from
changing to 0, the
transmitter initiates
status reporting
based on the
number of PDUs. A
small value (smaller
than or equal to
PollPdu_p16) of
this parameter
results in a high
frequency of
sending polling
BTS3900:
PDUs, a short
V100R008C00
round-trip time for
BTS3900 LTE: Radio L
RLC packets, and a
V100R003C00
high speed of send
window movement.
If the send window
is not 0, however, a
small value does
not increase the
transmission speed;
instead, it leads to
an excessive
number of status
reports. A large
value of this
parameter results in
a low speed of send
window movement.
If this parameter is
set to a small value,
too many polling
PDUs are sent. In
addition, the
number of ARQ
retransmissions
reaches its BTS3900:
maximum due to V100R008C00
consecutive PDU BTS3900 LTE: Radio L
retransmissions, V100R003C00
and therefore the
RRC connection is
re-established. If
this parameter is
set to a large value,
status reports
cannot be sent in
time.
If this parameter is
set to a small value,
too many polling
PDUs are sent. In
addition, the
number of ARQ
retransmissions
reaches its BTS3900:
maximum due to V100R008C00
consecutive PDU BTS3900 LTE: Radio L
retransmissions, V100R003C00
and therefore the
RRC connection is
re-established. If
this parameter is
set to a large value,
status reports
cannot be sent in
time.
This parameter has
an impact on status
reporting in AM. A
low frequency of
status reporting
leads to a low
frequency of status
report scheduling
but a high
probability that the
send window
changes to 0,
thereby reducing
the transmission
rate. A high
frequency of status BTS3900:
reporting leads to a V100R008C00
high probability of BTS3900 LTE: Radio L
timely V100R003C00
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.
This parameter has
an impact on status
reporting in AM. A
low frequency of
status reporting
leads to a low
frequency of status
report scheduling
but a high
probability that the
send window
changes to 0,
thereby reducing
the transmission
rate. A high
frequency of status BTS3900:
reporting leads to a V100R008C00
high probability of BTS3900 LTE: Radio L
timely V100R003C00
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and repeated status
reports from the
receiver, thereby
wasting resources.
A large value of this BTS3900:
parameter leads to V100R008C00
a long delay for the BTS3900 LTE: Radio L
receiver to V100R003C00
determine an out-
of-order packet
transmission failure
and therefore a
long delay for
sending status
reports, thereby
delaying services
and reducing the
throughput.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and repeated status
reports from the
receiver, thereby
wasting resources.
A large value of this BTS3900:
parameter leads to V100R008C00
a long delay for the BTS3900 LTE: Radio L
receiver to V100R003C00
determine an out-
of-order packet
transmission failure
and therefore a
long delay for
sending status
reports, thereby
delaying services
and reducing the
throughput.

The PDCP
sequence number
size must be large
enough to prevent
Hyper Frame
Number (HFN) BTS3900:
mismatch caused V100R008C00
by loss of a large BTS3900 LTE: Radio L
number of packets. V100R003C00
However, a longer
PDCP sequence
number results in
more PDCP header
overhead and lower
payload throughput.
The sequence
number size
specified by this
parameter must be
large enough to BTS3900:
prevent sequence V100R008C00
number ambiguity BTS3900 LTE: Radio L
caused by HARQ V100R003C00
retransmissions.
However, a large
size results in a
heavy RLC header
load.

The sequence
number size
specified by this
parameter must be
large enough to BTS3900:
prevent sequence V100R008C00
number ambiguity BTS3900 LTE: Radio L
caused by HARQ V100R003C00
retransmissions.
However, a large
size results in a
heavy RLC header
load.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and a large number
of lost packets. A
BTS3900:
large value of this
V100R008C00
parameter leads to
BTS3900 LTE: Radio L
a long delay for the
V100R003C00
receiver to
determine an out-
of-order packet
transmission failure,
thereby delaying
services and
reducing the
throughput.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and a large number
of lost packets. A
BTS3900:
large value of this
V100R008C00
parameter leads to
BTS3900 LTE: Radio L
a long delay for the
V100R003C00
receiver to
determine an out-
of-order packet
transmission failure,
thereby delaying
services and
reducing the
throughput.

If this parameter is
set to FALSE, the
target eNodeB will
transmit all data
BTS3900:
forwarded by the
V100R008C00
source eNodeB.
BTS3900 LTE: Radio L
Part of the data
V100R003C00
may already be
transmitted to UEs,
thereby wasting
resources on the air
interface.
If this parameter is
set to ON, the
number of
retransmissions and
the number of times
the status report is
sent decrease. This
can save air
interface resources
and reduce the
probability that an
RRC connection
reestablishes
because the
number of RLC
retransmissions has
BTS3900:
reaches the
V100R009C00
maximum value.
BTS3900 LTE: Radio L
If this parameter is
V100R009C00
set to OFF and the
number of UEs in a
cell increases, the
number of invalid
retransmissions and
the number of times
the status report is
sent are excessive,
increasing the
probability of RRC
connection
reestablishment
because the RLC
retransmission has
reached the
maximum number
of times.
If this parameter is
set to a small value,
excessive polling
PDUs will be sent.
In addition, the
number of ARQ
retransmissions
reaches its
maximum due to
consecutive PDU
retransmissions. BTS3900:
Then, the RRC V100R009C00
connection is BTS3900 LTE: Radio L
reestablished, and V100R009C00
the UE experiences
the service drop. If
this parameter is
set to a large value,
status reports
cannot be sent in
time, thereby
affecting the RLC
send window
movement and UE
throughput.
This parameter has
an impact on status
reporting in AM. A
low frequency of
status reporting
results in a low
frequency of status
report scheduling
but a high
probability that the
send window size
changes to 0,
thereby reducing
the transmission
rate and UE
throughput. A high
BTS3900:
frequency of status
V100R009C00
reporting results in
BTS3900 LTE: Radio L
a high probability of
V100R009C00
timely
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.
If this parameter is
set to a small value,
excessive polling
PDUs will be sent.
In addition, the
number of ARQ
retransmissions
reaches its
maximum due to
consecutive PDU
retransmissions. BTS3900:
Then, the RRC V100R009C00
connection is BTS3900 LTE: Radio L
reestablished, and V100R009C00
the UE experiences
the service drop. If
this parameter is
set to a large value,
status reports
cannot be sent in
time, thereby
affecting the RLC
send window
movement and UE
throughput.
This parameter has
an impact on status
reporting in AM.A
low frequency of
status reporting
results in a low
frequency of status
report scheduling
but a high
probability that the
send window size
changes to 0,
thereby reducing
the transmission
rate and UE
throughput. A high
BTS3900:
frequency of status
V100R009C00
reporting results in
BTS3900 LTE: Radio L
a high probability of
V100R009C00
timely
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.

If this parameter is
set to ON, the
number of bearer
setup failures for
UEs that do not
support the RLC
BTS3900:
transmission in UM
V100R010C00
mode can
BTS3900 LTE: Radio L
decrease. If this
V100R010C00
parameter is set to
OFF, the bearers for
UEs that do not
support the RLC
transmission in UM
mode fail to be set
up.
set to OFF(Off), the
DlPdcpDiscardTime
r parameter cannot
be configured. The
PDCP discard timer
retains the original
processing mode.
The value of the
PDCP discard timer
in the eNodeB and
that delivered to the
UE are determined
by the value of the
DiscardTimer
parameter. If this
parameter is set to
ON(On), the
BTS3900:
discardTimer field
V100R010C10
of the PDCP-Config
BTS3900 LTE: Radio L
IE carried in the
V100R010C10
RRCConnectionRe
configuration
message retains
the original
mechanism. The
discardTimer field
delivered to the UE
is determined by
the value of the
DiscardTimer
parameter. The
value of the PDCP
discard timer
configured in the
eNodeB is
determined by the
value of the
DlPdcpDiscardTime
A large value of this
parameter results in
a long delay of
downlink services
and a failure to
BTS3900:
meet the QCI
V100R010C10
requirement. A
BTS3900 LTE: Radio L
small value of this
V100R010C10
parameter leads to
a severe case of
PDCP data
discarding and
therefore low
throughput.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A larger value of
this parameter
results in a higher
interference
resistance
capability. However,
a larger number of
retransmissions BTS3900:
results in a longer V100R010C10
delay of Uu BTS3900 LTE: Radio L
signaling message V100R010C10
transmission. A
smaller value of this
parameter results in
a smaller number of
retransmissions and
a lower interference
resistance
capability.
A larger value of
this parameter
results in a higher
interference
resistance
capability. However,
a larger number of
retransmissions BTS3900:
results in a longer V100R010C10
delay of Uu BTS3900 LTE: Radio L
signaling message V100R010C10
transmission. A
smaller value of this
parameter results in
a smaller number of
retransmissions and
a lower interference
resistance
capability.

To prevent buffer
overflow caused by
an excessively long
queue, the
transmitter sends
status reports
based on the data
BTS3900:
volume of
V100R010C10
transmitted PDUs. A
BTS3900 LTE: Radio L
small value of this
V100R010C10
parameter results in
a high frequency of
sending polling
PDUs. A large value
leads to high buffer
occupancy and a
slow speed of send
window movement.
To prevent buffer
overflow caused by
an excessively long
queue, the
transmitter sends
status reports
based on the data
BTS3900:
volume of
V100R010C10
transmitted PDUs. A
BTS3900 LTE: Radio L
small value of this
V100R010C10
parameter results in
a high frequency of
sending polling
PDUs. A large value
leads to high buffer
occupancy and a
slow speed of send
window movement.
To prevent the send
window from
changing to 0, the
transmitter initiates
status reporting
based on the
number of PDUs. A
small value (smaller
than or equal to
PollPdu_p16) of
this parameter
results in a high
frequency of
sending polling
BTS3900:
PDUs, a short
V100R010C10
round-trip time for
BTS3900 LTE: Radio L
RLC packets, and a
V100R010C10
high speed of send
window movement.
If the send window
is not 0, however, a
small value does
not increase the
transmission speed;
instead, it leads to
an excessive
number of status
reports. A large
value of this
parameter results in
a low speed of send
window movement.
To prevent the send
window from
changing to 0, the
transmitter initiates
status reporting
based on the
number of PDUs. A
small value (smaller
than or equal to
PollPdu_p16) of
this parameter
results in a high
frequency of
sending polling
BTS3900:
PDUs, a short
V100R010C10
round-trip time for
BTS3900 LTE: Radio L
RLC packets, and a
V100R010C10
high speed of send
window movement.
If the send window
is not 0, however, a
small value does
not increase the
transmission speed;
instead, it leads to
an excessive
number of status
reports. A large
value of this
parameter results in
a low speed of send
window movement.
If this parameter is
set to a small value,
too many polling
PDUs are sent. In
addition, the
number of ARQ
retransmissions
reaches its BTS3900:
maximum due to V100R010C10
consecutive PDU BTS3900 LTE: Radio L
retransmissions, V100R010C10
and therefore the
RRC connection is
re-established. If
this parameter is
set to a large value,
status reports
cannot be sent in
time.
If this parameter is
set to a small value,
too many polling
PDUs are sent. In
addition, the
number of ARQ
retransmissions
reaches its BTS3900:
maximum due to V100R010C10
consecutive PDU BTS3900 LTE: Radio L
retransmissions, V100R010C10
and therefore the
RRC connection is
re-established. If
this parameter is
set to a large value,
status reports
cannot be sent in
time.
This parameter has
an impact on status
reporting in AM. A
low frequency of
status reporting
leads to a low
frequency of status
report scheduling
but a high
probability that the
send window
changes to 0,
thereby reducing
the transmission
rate. A high
frequency of status BTS3900:
reporting leads to a V100R010C10
high probability of BTS3900 LTE: Radio L
timely V100R010C10
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.
This parameter has
an impact on status
reporting in AM. A
low frequency of
status reporting
leads to a low
frequency of status
report scheduling
but a high
probability that the
send window
changes to 0,
thereby reducing
the transmission
rate. A high
frequency of status BTS3900:
reporting leads to a V100R010C10
high probability of BTS3900 LTE: Radio L
timely V100R010C10
acknowledgment to
data in the send
window and
therefore a high
probability of rate
guarantee.
However, a high
frequency of status
reporting results in
a high probability of
status report
scheduling and
repeated
transmissions,
thereby wasting
resources.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and repeated status
reports from the
receiver, thereby
wasting resources.
A large value of this BTS3900:
parameter leads to V100R010C10
a long delay for the BTS3900 LTE: Radio L
receiver to V100R010C10
determine an out-
of-order packet
transmission failure
and therefore a
long delay for
sending status
reports, thereby
causing Uu
signaling message
transmission delay.
A small value of this
parameter results in
useless HARQ
retransmissions
from the transmitter
and repeated status
reports from the
receiver, thereby
wasting resources.
A large value of this BTS3900:
parameter leads to V100R010C10
a long delay for the BTS3900 LTE: Radio L
receiver to V100R010C10
determine an out-
of-order packet
transmission failure
and therefore a
long delay for
sending status
reports, thereby
causing Uu
signaling message
transmission delay.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
A smaller value of
this parameter
results in less uplink
bandwidth to be
allocated to
services with the BTS3900:
QCI when the V100R008C00
uplink transport BTS3900 LTE: Radio L
bandwidth or uplink V100R003C00
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a higher
downlink
scheduling priority
for services with the BTS3900:
QCI and also a V100R008C00
higher priority with BTS3900 LTE: Radio L
which the data rate V100R003C00
for these services is
guaranteed. A
smaller value of this
parameter results in
the opposite
effects.

A smaller value of
this parameter
indicates a smaller
uplink minimum
guaranteed bit rate
for services with the
QCI and results in
lower uplink
transport load and
estimated usage of BTS3900:
uplink licensed V100R008C00
traffic volume of BTS3900 LTE: Radio L
such services and a V100R003C00
larger number of
admitted services
when the downlink
transport bandwidth
or licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in lower
downlink transport
load and estimated
downlink usage of
licensed traffic
volume of services
BTS3900:
with the QCI and
V100R008C00
therefore a larger
BTS3900 LTE: Radio L
number of admitted
V100R003C00
services when the
downlink transport
bandwidth or
licensed traffic
volume is limited. A
larger value of this
parameter results in
the opposite
effects.

A lager value of this

parameter results a
shorter pre-
BTS3900:
allocation delay for
V100R008C00
services with the
BTS3900 LTE: Radio L
QCI. A smaller
V100R003C00
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
this parameter
indicates a higher
prioritized bit rate of
logical channels for
services with the
specific standard
QCI and results in a
higher probability
that low-priority
services fail to be
scheduled. If this
parameter is set to
PBR_INFINITY and
the traffic volume of
services with the
QCI is high, there is
a risk that the
BTS3900:
services with QCIs
V100R008C00
indicating lower
BTS3900 LTE: Radio L
priorities will never
V100R003C00
be scheduled. A
smaller value of this
parameter indicates
a lower prioritized
bit rate of logical
channels for
services with the
QCI and results in a
lower probability
that low-priority
services fail to be
scheduled. If this
parameter is set to
PBR_0_KBps,
there is a risk that
the services with
the corresponding
QCI will never be
A smaller value of
this parameter
results in a higher
downlink
scheduling priority
for services with the BTS3900:
QCI and also a V100R008C00
higher priority with BTS3900 LTE: Radio L
which the data rate V100R003C00
for these services is
guaranteed. A
larger value of this
parameter results in
the opposite
effects.
licensed traffic
congestion occurs.
As a result, the
delay and packet
loss rate increase.
However, the
transport load and
estimated usage of
licensed traffic
volume are not
measured based on
the actual traffic
volume. The
number of admitted
services is not
affected even if the
actual traffic volume
BTS3900:
of the services with
V100R008C00
the QCI is large.
BTS3900 LTE: Radio L
When this
V100R005C00
parameter is set to
NON_FLOW_CTRL
, the eNodeB does
not perform flow
control on services
with the QCI when
transport
congestion or
licensed traffic
congestion occurs.
As a result, the
delay and packet
loss rate do not
increase. However,
the transport load
and estimated
usage of licensed
traffic volume are BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
to UEs in a cell is
determined by the
setting of the
FixedBfMimoMode
parameter. For
details, see the
description of
impact on radio
network
performance of the
FixedBfMimoMode
parameter.
If this parameter is
set to
TxD_BF_ADAPTIV
E, the transmission
mode that applies
BTS3900:
to UEs in a cell can
V100R008C00
be TM2 or
BTS3900 LTE: Radio L
beamforming and
V100R003C00
the peak
transmission rates
of MIMO UEs are
affected. This
parameter can be
set to
TxD_BF_ADAPTIV
E in scenarios
without requiring
TM3 transmission
mode.
If this parameter is
set to
MIMO_BF_ADAPTI
VE, the eNodeB
adaptively uses
beamforming or
open-loop MIMO
The setting of this
parameter
determines the
transmission modes
BTS3900:
that apply to UEs
V100R008C00
served by a multi-
BTS3900 LTE: Radio L
antenna eNodeB
V100R003C00
and therefore
affects performance
such as the
throughput and
coverage.
If this parameter is
set to ON, the
eNodeB adaptively
configures the
period and offset of
periodic CQI
reporting for UEs. If
this parameter is
set to OFF, the
eNodeB configures
the CQI reporting
period for UEs
based on the
BTS3900:
setting of the
V100R008C00
UserCqiPeriodCfg
BTS3900 LTE: Radio L
parameter. The CQI
V100R005C00
offset is mapped to
a corresponding
reporting period.
The setting of this
parameter affects
the downlink and
uplink throughput
and the user
number
specification. For
details, see the
description of the
UserCqiPeriodCfg
parameter.

A smaller value of
this parameter
results in more
frequent periodic
CQI reporting,
higher downlink
throughput, and
fewer UEs that can
BTS3900:
participate in CQI
V100R008C00
reporting, reducing
BTS3900 LTE: Radio L
uplink throughput
V100R005C00
due to the decrease
of the number of
available RBs for
uplink data
transmission. A
larger value of this
parameter results in
the opposite
effects.
uplink control
channel (PUCCH)
is under severe
interference or the
false detection rate
of the PUCCH TPC
command is high,
the false detection
rate of the downlink
HARQ-ACK
increaes and the
downlink
throughput
decreases. In this
case, set this
command to OFF.
This ensures that BTS3900:
CQI and HARQ- V100R008C00
ACK cannot be sent BTS3900 LTE: Radio L
simultaneously, and V100R008C00
therefore false
detection rate of the
downlink HARQ-
ACK decreases,
and the downlink
throughout
increases. When
the PUCCH
performance is
good, set this
command to ON. In
this case, CQI and
Ack or Nack can be
sent
simultaneously, and
therefore the CQI
discarding rate
decreases PUCCH
resources to be
used and increases
available PUSCH
resources, and
therefore leads to a
higher uplink peak
rate. In addition, the
downlink
performance
decreases because
the number of UEs
using a long CQI
reporting period
increases and such
UEs cannot timely
feed back the BTS3900:
channel quality. V100R008C01
If this switch is BTS3900 LTE: Radio L
turned off, the V100R008C01
eNodeB configures
more UEs with a
short CQI reporting
period. This
increases PUCCH
resources to be
used and
decreases available
PUSCH resources,
and therefore leads
to a lower uplink
peak rate. In
addition, the
downlink
performance
improves because
the number of UEs
Setting this
parameter to ON
increases the
downlink
throughput of UEs BTS3900:
but also increases V100R009C00
the signaling BTS3900 LTE: Radio L
overheads for V100R009C00
handover. Setting
this parameter to
OFF does not affect
radio network
performance.
adaptation
increases downlink
throughput, but
decreases uplink
throughput if uplink
coding rate
increases because
of PMI reporting.
With 2-way
transmission
enabled, closed-
loop MIMO
adaptation is
dependent on UEs.
If the PMI values
reported by UEs
are unreliable, the
BTS3900:
demodulation
V100R008C00
capability of UEs is
BTS3900 LTE: Radio L
low under closed-
V100R001C01
loop MIMO
schemes, or UEs
move fast such as
in high-speed
railway scenarios,
closed-loop MIMO
adaptation
decreases downlink
throughput,
compared with
open-loop MIMO
adaptation. When
4-way transmission
is enabled on the
network, closed-
loop MIMO
adaptation
significantly
increases because
of PMI reporting.
With 2-way
transmission
enabled, TM4 is
dependent on UEs.
If the PMI values
reported by UEs
are unreliable, the
demodulation
capability of UEs is
low under closed-
loop MIMO
schemes, or UEs
move fast such as
in high-speed
railway scenarios, BTS3900:
TM4 decreases the V100R008C00
downlink BTS3900 LTE: Radio L
throughput V100R003C00
compared with
TM3. When 4-way
transmission is
enabled on the
network, TM4
significantly
increases the
downlink
throughput in non-
high-speed
scenarios
compared with
TM3, but it
decreases the
uplink throughput if
uplink coding rate
increases because
network compared
with that when this
parameter is set to
ADAPTIVE.
Therefore, the
service drop rate
increases. If a high
PDCCH
aggregation level is
selected on the
network, the access
success rate
increases but
downlink
throughput
decreases because
only a single data BTS3900:
stream can be V100R008C00
transmitted. BTS3900 LTE: Radio L
If this parameter is V100R008C00
set to ADAPTIVE,
the eNodeB does
not perform a MIMO
reconfiguration
procedure for a UE
that initially
accesses the
network, compared
with that when this
parameter is set to
TM2. Therefore, the
service drop rate
decreases. In
addition, downlink
throughput
increases because
one or more data

If this parameter is
set to ON, the
eNodeB adaptively
adjusts the SRS
period for UEs that
will access the cells
under the eNodeB.
The adjustment is
based on the load BTS3900:
of SRS resources V100R008C00
and achieves a BTS3900 LTE: Radio L
tradeoff between V100R005C00
the number of UEs
served and network
performance. If this
parameter is set to
OFF, the eNodeB
uses a fixed SRS
period for UEs that
will access the cells
under the eNodeB.
The setting of this
parameter applies
to all UEs in the
cells. Set this
parameter to
achieve a tradeoff
between the
number of UEs
served and network BTS3900:
performance. A V100R008C00
shorter SRS period BTS3900 LTE: Radio L
results in a shorter V100R005C00
interval of the SRS
measurement and
results in better
user experience
and a lower SRS
capacity in the cell.
A longer SRS
period results in the
opposite effects.

BTS3900:
V100R010C10
none BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
none BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
none BTS3900 LTE: Radio L
V100R010C10
If some UEs in the
network do not
support some
features and
thereby network BTS3900:
KPIs are affected, V100R010C10
turning on BTS3900 LTE: Radio L
corresponding V100R010C10
switches can
disable related
features on UEs
and therefore the
KPIs are improved.

BTS3900:
V100R010C10
none BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A shorter repetition
period of
measurement gaps
results in a shorter
time it takes to
identify intra-RAT
and inter-RAT
neighboring
frequencies, more
samples per unit
time, and a larger
decrease in the
maximum BTS3900:
throughput of UEs V100R008C00
performing gap- BTS3900 LTE: Radio L
assisted V100R001C00
measurements. A
longer repetition
period results in a
longer time it takes
to identify intra-RAT
and inter-RAT
neighboring
frequencies, fewer
samples per unit
time, and a higher
probability of
handover failures
and service drops.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

A decrease in the
value of this
parameter indicates
a decrease in the
number of
candidate cells for
each handover. In BTS3900:
this case, the V100R008C00
success rate of the BTS3900 LTE: Radio L
handover triggered V100R001C00
by each
measurement
report is decreased,
but the required
amount of radio
interface resource
is reduced.
When the value is
increased, the
number of reports
increases and the
handover success
BTS3900:
rate rises to a
V100R008C00
certain extent. An
BTS3900 LTE: Radio L
excessively large
V100R001C00
number of reports,
however, results in
excessive signaling
and hence causes
a waste of radio
interface resources.

A smaller value of
this parameter
leads to more
measurement
reports over the air
interface and more
resources are
consumed. A larger
value of this
BTS3900:
parameter results in
V100R008C00
a larger handover
BTS3900 LTE: Radio L
delay, which lowers
V100R001C00
the handover
success rate.
Therefore, a smaller
value is
recommended to
ensure timely
handovers in the
initial phase of LTE
network
deployment.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
results in a larger
number of reports,
greater
consumption of
radio interface BTS3900:
resources and a V100R008C00
higher handover BTS3900 LTE: Radio L
success rate. A V100R001C00
larger value of this
parameter leads to
a longer delay of
handover retries
and thus a lower
handover success
rate.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A smaller value of
this parameter
leads to more
measurement
reports over the air
interface and more
resources are
consumed. A larger
value of this
BTS3900:
parameter results in
V100R008C00
a larger handover
BTS3900 LTE: Radio L
delay, which lowers
V100R001C00
the handover
success rate.
Therefore, a smaller
value is
recommended to
ensure timely
handovers in the
initial phase of LTE
network
deployment.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
leads to more
measurement
reports over the air
interface and more
resources are
consumed. A larger
value of this
BTS3900:
parameter results in
V100R008C00
a larger handover
BTS3900 LTE: Radio L
delay, which lowers
V100R001C00
the handover
success rate.
Therefore, a smaller
value is
recommended to
ensure timely
handovers in the
initial phase of LTE
network
deployment.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
If this parameter is
set to
BY_MEAS_RESUL
T, the probability
that CDMA2000
network cell pseudo
noises (PNs) are
correctly identified
increases, leading
to higher success
rate of optimized
handovers from E-
UTRAN to
CDMA2000
BTS3900:
network.
V100R008C01
It is recommended
BTS3900 LTE: Radio L
that this parameter
V100R008C01
be set to
BY_RATIO in
scenarios where
the E-UTRAN cell
has few reference
cells. If the E-
UTRAN cell is
configured with
multiple reference
CDMA2000 cells, it
is recommended
that this parameter
be set to
BY_MEAS_RESUL
T.

If this parameter is
set to ON(On) and
a frequency is not
configured with a
BTS3900:
PLMN, more target
V100R010C10
frequencies can be
BTS3900 LTE: Radio L
selected during
V100R010C10
blind redirections,
and the number of
inter-RAT blind
redirections
increases.
A smaller value of
this parameter
leads to less
candidate target
BTS3900:
cells for handovers,
V100R008C00
which lowers the
BTS3900 LTE: Radio L
handover success
V100R001C00
rate but saves the
air interface
resources. A larger
value leads to
opposite effect.

When the value is

increased, the
number of reports
increases and the
handover success
BTS3900:
rate rises to a
V100R008C00
certain extent. An
BTS3900 LTE: Radio L
excessively large
V100R001C00
number of reports,
however, results in
excessive signaling
and hence causes
a waste of radio
interface resources.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
results in a larger
number of reports,
greater
consumption of
radio interface BTS3900:
resources and a V100R008C00
higher handover BTS3900 LTE: Radio L
success rate. A V100R001C00
larger value of this
parameter leads to
a longer delay of
handover retries
and therefore a
lower handover
success rate.
If this parameter is
set to BOTH, both
measured RSRP
and RSRQ values
are reported for
event A4/A5. In this
situation, a
handover is
triggered only when
both the measured
RSRP and RSRQ
values meet the
corresponding BTS3900:
conditions, V100R008C00
preventing BTS3900 LTE: Radio L
unnecessary V100R001C00
handovers.
If this parameter is
set to
SAME_AS_TRIG_
QUAN, the
measurement
quantity included in
the measurement
report for event
A4/A5 is the same
as the quantity
used to trigger
event A4/A5.

A smaller value of
this parameter
results in a larger
number of reports,
greater
consumption of
radio interface BTS3900:
resources and a V100R008C00
higher handover BTS3900 LTE: Radio L
success rate. A V100R001C00
larger value of this
parameter leads to
a longer delay of
handover retries
and thus a lower
handover success
rate.
If this parameter is
set to BOTH, the
eNodeB sends UEs
two measurement
configurations for
events A1 and A2:
one based on
RSRP, and the
other based on
RSRQ. When the
triggering condition
specified by either BTS3900:
configuration for V100R008C00
event A2 is fulfilled, BTS3900 LTE: Radio L
event A2 is reported V100R001C00
and inter-frequency
or inter-RAT
measurements are
started. When the
triggering condition
specified by both
configurations for
event A1 is fulfilled,
inter-frequency and
inter-RAT
measurements are
stopped.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
If this parameter is
set to 0, the
eNodeB
immediately
processes a
measurement
report when
receiving it and
does not wait for
more measurement
BTS3900:
reports. A larger
V100R009C00
value of this
BTS3900 LTE: Radio L
parameter indicates
V100R009C00
a longer timer for
the eNodeB to wait
for new
measurement
reports, resulting
longer handover
delay and a higher
probability of
service drops due
to handover
failures.

If this parameter is
set to RSRP, the
measured values
are stable, varying
little with the load,
and therefore there
BTS3900:
is little signal
V100R010C10
fluctuation. If this
BTS3900 LTE: Radio L
parameter is set to
V100R010C10
RSRQ, the
measured values
fluctuate greatly
with the load and
therefore reflect the
signal quality of the
cell in real time.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
UTRAN cell, and a V100R002C00
smaller value
results in a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
GERAN cell, and a V100R002C00
smaller value
results in a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to BTS3900 LTE: Radio L
CDMA2000, and a V100R002C00
smaller value
results in a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to BTS3900 LTE: Radio L
UTRAN, and a V100R002C00
smaller value
results in a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to BTS3900 LTE: Radio L
UTRAN, and a V100R001C00
smaller value
results in a higher
probability.

A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to the BTS3900 LTE: Radio L
GERAN cell, and a V100R002C00
smaller value
results in a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to BTS3900 LTE: Radio L
CDMA2000, and a V100R002C00
smaller value
results in a higher
probability.
A larger value of
this parameter
results in a lower BTS3900:
probability of V100R008C00
handover to an BTS3900 LTE: Radio L
inter-RAT cell, and V100R005C01
a smaller value
results in a higher
probability.
If this parameter is
set to a too large
value, the CSFB
delay increases. If
this parameter is
set to a too small
value, the serving
eNodeB initiates a
blind redirection
before the UE has
BTS3900:
sufficient time to
V100R008C00
complete the
BTS3900 LTE: Radio L
measurement,
V100R005C01
report the
measurement
result, or complete
the PS handover.
As a result, the
CSFB delay
increases because
the CSFB delay is
longer in a blind
redirection than in a
PS handover.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
random number
"rand" in the range
[0,1). If rand is
smaller than the
value of
AcBarringFactorFor
Call or
AcBarringFactorFor
Sig, the UE
considers access to
the cell as allowed.
That is, the RRC
connection can be
set up for the
mobile-originated
call or signaling. A
larger value of BTS3900:
AcBarringFactorFor V100R008C00
Call or BTS3900 LTE: Radio L
AcBarringFactorFor V100R001C01
Sig leads to a
higher probability of
granting access to
a UE, which may
increase cell load. A
smaller value of
AcBarringFactorFor
Call or
AcBarringFactorFor
Sig leads to a lower
probability of
granting access to
a UE. As a result, a
UE may fail to
access the cell
even when the cell
load is relatively

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
set to CFG, the UE
draws a random
number 'rand' that
is uniformly
distributed in the
range [0,1). If rand
is smaller than the
value of this
parameter, the UE
considers access to
the cell as allowed.
That is, an RRC
connection can be
set up for the
mobile-originated
call. If this
parameter is set to BTS3900:
a large value, the V100R008C00
probability of BTS3900 LTE: Radio L
allowing access to V100R001C00
the cell is high,
which may lead to a
high cell load. If this
parameter is set to
a small value, the
probability of
allowing access to
the cell is low, in
which situation UEs
may fail to access
the cell even when
the cell load is
relatively light. If
this parameter is
set to P00, an RRC
connection is
prohibited from

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01

AcBarringForMoDat
aCfgInd or
AcBarringForMoSig
CfgInd in SIB2 is
set to CFG, the UE
generates a
random number
"rand" in the range
[0,1). If "rand" is
smaller than the
value of this
parameter, the UE
considers access to
the cell as allowed.
That is, the RRC
connection can be
set up for the
BTS3900:
signaling. A larger
V100R008C00
value of this
BTS3900 LTE: Radio L
parameter leads to
V100R001C00
a higher probability
of granting access
to a UE, which may
increase cell load. A
smaller value of this
parameter leads to
a lower probability
of granting access
to a UE. As a result,
a UE may fail to
access the cell
even when the cell
load is relatively
light. If this
parameter is set to
P00, the RRC
connection for
signaling cannot be
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
gInd is set to CFG,
the UE draws a
random number
"rand" that is
uniformly distributed
in the range [0,1). If
rand is smaller than
this parameter
value, the UE
considers access to
the cell as granted.
That is, an RRC
connection can be
set up for the
MMTEL voice
service. A larger
value of this BTS3900:
parameter leads to V100R009C00
a higher probability BTS3900 LTE: Radio L
of granting access V100R009C00
to a UE, which may
increase cell load. A
smaller value of this
parameter leads to
a lower probability
of granting access
to a UE, resulting in
that a UE may fail
to access the cell
even when the cell
load is relatively
light. If this
parameter is set to
P00, an RRC
connection is
prohibited from
being set up for the

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
gInd is set to CFG,
the UE draws a
random number
"rand" that is
uniformly distributed
in the range [0,1). If
rand is smaller than
this parameter
value, the UE
considers access to
the cell as granted.
That is, an RRC
connection can be
set up for the
MMTEL video
service. A larger
value of this BTS3900:
parameter leads to V100R009C00
a higher probability BTS3900 LTE: Radio L
of granting access V100R009C00
to a UE, which may
increase cell load. A
smaller value of this
parameter leads to
a lower probability
of granting access
to a UE, resulting in
that a UE may fail
to access the cell
even when the cell
load is relatively
light. If this
parameter is set to
P00, an RRC
connection is
prohibited from
being set up for the

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
AcBarForCsfbCfgIn
d in SIB2 is set to
CFG, the UE
generates a
random number
"rand" that is
uniformly distributed
in the range [0,1). If
rand is smaller than
this parameter
value, the UE
considers access to
the cell as granted.
That is, an RRC
connection can be
set up for the CSFB
service. A larger
BTS3900:
value of this
V100R009C00
parameter leads to
BTS3900 LTE: Radio L
a higher probability
V100R009C00
of granting access
to a UE, which may
increase cell load. A
smaller value of this
parameter leads to
a lower probability
of granting access
to a UE. As a result,
a UE may fail to
access the cell
even when the cell
load is relatively
light. If this
parameter is set to
P00, an RRC
connection is
prohibited from
being set up for the

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

If this parameter is
set to CFG,
signaling overheads
on the network
decrease, and the BTS3900:
access delay of V100R009C00
normal UEs is not BTS3900 LTE: Radio L
affected. If this V100R009C00
parameter is set to
NOT_CFG,
signaling overheads
on the network may
increase.

If UEs having
compatibility
problems exist in
the network, a
larger value of this
parameter leads to
less signaling
generated due to BTS3900:
repeatedly initiated V100R009C00
synchronization BTS3900 LTE: Radio L
procedures by such V100R009C00
UEs but a longer
delay for such UEs
to access the
network. A smaller
value of this
parameter leads to
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
With other
parameters related
to cell reselection
unchanged, a larger
value of this
parameter leads to
a lower probability BTS3900:
of reselection to an V100R008C00
intra-frequency or BTS3900 LTE: Radio L
same-priority V100R001C00
neighboring cell. A
smaller value of this
parameter leads to
a higher probability,
but a larger number
of ping-pong cell
reselections.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
leads to a lower
probability of the
UE entering the
high mobility or BTS3900:
medium mobility V100R008C00
state and a smaller BTS3900 LTE: Radio L
impact of the V100R001C00
mobility status on
cell reselections. A
larger value of this
parameter leads to
the opposite
effects.
A larger value of
this parameter
leads to a lower
probability of the
UE entering the
BTS3900:
normal mobility
V100R008C00
state, a lower
BTS3900 LTE: Radio L
probability of
V100R001C00
adjustment of
reselection-related
parameters, and a
smaller impact of
UE speed variation
on cell reselection.

A larger value of
this parameter
indicates a lower
probability of a UE
entering the
medium mobility
state. In this case, BTS3900:
the reselection- V100R008C00
related parameters BTS3900 LTE: Radio L
are not adjusted V100R001C00
and cell
reselections are
more difficult to
trigger. A smaller
value of this
parameter leads to
the opposite effect.
A larger value of
this parameter
indicates a lower
probability of a UE
entering the high
mobility state. In
BTS3900:
this case,
V100R008C00
reselection-related
BTS3900 LTE: Radio L
parameters are not
V100R001C00
adjusted and cell
reselections are
more difficult to
trigger. A smaller
value of this
parameter leads to
the opposite effect.

A smaller value of
this parameter
results in a greater
impact of the UE
BTS3900:
mobility state on the
V100R008C00
hysteresis for cell
BTS3900 LTE: Radio L
reselection, that is,
V100R001C00
results in a higher
probability of cell
reselection. A larger
value leads to a
smaller impact.

A smaller value of
this parameter
results in a greater
impact of the UE
BTS3900:
mobility state on the
V100R008C00
hysteresis for cell
BTS3900 LTE: Radio L
reselection, that is,
V100R001C00
results in a higher
probability of cell
reselection. A larger
value leads to a
smaller impact.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

With other
conditions
unchanged, a larger
value of this
parameter leads to BTS3900:
a higher probability V100R008C00
of triggering inter- BTS3900 LTE: Radio L
frequency or inter- V100R001C00
RAT
measurements, and
a smaller value
indicates a lower
probability.

A smaller value of
this parameter
BTS3900:
indicates a lower
V100R008C00
frequency of the
BTS3900 LTE: Radio L
reselection to a low
V100R001C00
priority inter-
frequency/inter-RAT
cell.

A larger value of
this parameter
indicates a higher
probability of a UE BTS3900:
camping on the V100R008C00
cells assigned with BTS3900 LTE: Radio L
the same frequency V100R001C00
as the serving one,
and a smaller value
indicates a lower
probability.
The greater the
parameter, the
more difficult for the
cell to meet the S
criterion, the more
difficult for the cell
to become Suitable
Cell. The difficulty
level of the cell
selection is
increased. The
BTS3900:
smaller the
V100R008C00
parameter, the
BTS3900 LTE: Radio L
easier for the cell to
V100R001C00
meet the S
criterion, the easier
for the cell to
become Suitable
Cell. The difficulty
level of the cell
selection is
decreased. The
selected cell should
provide the signal
quality for the basic
services.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
With other
conditions
unchanged, a larger
value of this
BTS3900:
parameter indicates
V100R008C00
a higher probability
BTS3900 LTE: Radio L
of triggering intra-
V100R001C00
frequency
measurements, and
a smaller value
indicates a lower
probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
leads to a higher
probability of
initiating cell BTS3900:
reselections but V100R008C00
also a higher BTS3900 LTE: Radio L
probability of ping- V100R001C00
pong reselections.
A larger value of
this parameter
leads to the
opposite effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A smaller value of
this parameter
results in a greater
impact of the UE
BTS3900:
mobility state on the
V100R008C00
cell reselection
BTS3900 LTE: Radio L
duration within E-
V100R001C00
UTRAN, that is,
results in a shorter
duration. A larger
value leads to a
smaller impact.

A smaller value of
this parameter
results in a greater
impact of the UE
mobility state on the
BTS3900:
actual value of the
V100R008C00
timer for cell
BTS3900 LTE: Radio L
reselection within E-
V100R001C00
UTRAN, that is,
results in a higher
probability of cell
reselection. A larger
value leads to a
smaller impact.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
With other
conditions
unchanged, a larger
value of this
BTS3900:
parameter indicates
V100R008C00
a higher probability
BTS3900 LTE: Radio L
of triggering intra-
V100R004C00
frequency
measurements, and
a smaller value
indicates a lower
probability.

With other
conditions
unchanged, a larger
value of this
parameter leads to BTS3900:
a higher probability V100R008C00
of triggering inter- BTS3900 LTE: Radio L
frequency or inter- V100R004C00
RAT
measurements, and
a smaller value
indicates a lower
probability.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

With other
conditions
unchanged, a
smaller value of this
parameter leads to
BTS3900:
a lower probability
V100R008C00
of reselection to an
BTS3900 LTE: Radio L
inter-frequency or
V100R004C00
inter-RAT cell on
lower-priority
frequencies, and a
larger value of this
parameter leads to
a higher probability.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

With other
conditions
unchanged, a
smaller parameter
value for a cell
leads to lower
probabilities of the
cell meeting criteria
S and becoming a
BTS3900:
suitable cell for
V100R008C00
selection, and a
BTS3900 LTE: Radio L
larger parameter
V100R004C00
value for a cell
leads to higher
probabilities. Set
this parameter
properly so that the
selected cell can
provide signals that
meet the quality
requirement of
basic services.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
leads to a higher
probability of
initiating cell BTS3900:
reselections but a V100R008C00
higher probability of BTS3900 LTE: Radio L
ping-pong V100R001C00
reselections. A
larger value of this
parameter leads to
the opposite
effects.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
results in a greater
impact of the UE
BTS3900:
mobility state on the
V100R008C00
duration of cell
BTS3900 LTE: Radio L
reselection to
V100R001C00
CDMA2000 HRPD,
that is, results in a
shorter duration. A
larger value leads
to a smaller impact.
A smaller value of
this parameter
results in a greater
impact of the UE
BTS3900:
mobility state on the
V100R008C00
duration of cell
BTS3900 LTE: Radio L
reselection to
V100R001C00
CDMA2000 HRPD,
that is, results in a
shorter duration. A
larger value leads
to a smaller impact.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

A smaller value of
this parameter
leads to a higher
probability of
initiating cell BTS3900:
reselections but a V100R008C00
higher probability of BTS3900 LTE: Radio L
ping-pong V100R002C00
reselections. A
larger value of this
parameter leads to
the opposite
effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
If this parameter is
set to
BOOLEAN_TRUE,
the network
supports dual-
receiver enhanced
CSFB to
CDMA2000 1xRTT,
BTS3900:
increasing the
V100R008C01
number of RRC
BTS3900 LTE: Radio L
connection releases
V100R008C01
in the E-UTRAN
cell. If this
parameter is set to
BOOLEAN_FALSE)
, the network does
not support dual-
receiver enhanced
CSFB to
CDMA2000 1xRTT.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A smaller value of
this parameter
leads to a higher
probability of
initiating cell BTS3900:
reselections but a V100R008C00
higher probability of BTS3900 LTE: Radio L
ping-pong V100R001C00
reselections. A
larger value of this
parameter leads to
the opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A smaller value
results in a higher
BTS3900:
speed of cell
V100R008C00
reselection for
BTS3900 LTE: Radio L
medium-mobility
V100R001C00
UEs. A larger value
leads to the
opposite effect.

A smaller value
results in a higher
BTS3900:
speed of cell
V100R008C00
reselection for high-
BTS3900 LTE: Radio L
mobility UEs. A
V100R001C00
larger value leads
to the opposite
effect.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A larger value
results in a lower
probability that the
BTS3900:
cell is selected
V100R008C00
when other
BTS3900 LTE: Radio L
conditions remain
V100R001C00
unchanged. A
smaller value leads
to the opposite
effect.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A smaller value of
this parameter
results in a greater
impact of the UE BTS3900:
mobility state on the V100R008C00
duration of cell BTS3900 LTE: Radio L
reselection to V100R001C00
UTRAN, that is, a
shorter duration. A
larger value leads
to a smaller impact.

A smaller value of
this parameter
results in a greater
impact of the UE BTS3900:
mobility state on the V100R008C00
duration of cell BTS3900 LTE: Radio L
reselection to V100R001C00
UTRAN, that is, a
shorter duration. A
larger value leads
to a smaller impact.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A larger value of
this parameter
leads to a lower
probability of the
cell meeting criteria
S and becoming a
suitable cell for cell
BTS3900:
selection. A smaller
V100R008C00
value of this
BTS3900 LTE: Radio L
parameter results in
V100R001C00
a higher probability.
Set this parameter
properly so that the
selected cells can
provide signals that
meet the quality
requirement of
basic services.
A larger value of
this parameter
leads to a higher
probability of the BTS3900:
cell meeting criteria V100R008C00
S and becoming a BTS3900 LTE: Radio L
suitable cell for cell V100R001C00
selection. A smaller
value of this
parameter results in
a lower probability.

A larger parameter
value for a cell
leads to lower
probabilities of the
cell meeting criteria
S and becoming a
suitable cell for cell
selection. A smaller
value of this
parameter leads to
BTS3900:
higher probabilities.
V100R008C00
Set this parameter
BTS3900 LTE: Radio L
properly so that the
V100R004C00
selected cell can
provide signals that
meet the quality
requirement of
basic services. If
the value of this
parameter is not
specified, the
default value
(negative infinity) is
used.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
A larger value of
this parameter
leads to higher
probabilities of the
cell meeting criteria
S and becoming a
suitable cell for cell
selection. A smaller BTS3900:
value of this V100R008C00
parameter results in BTS3900 LTE: Radio L
lower probabilities. V100R004C00
If this parameter is
not set, that is, the
value of this
parameter is not
sent to the UE over
the air interface, the
UE retains the
default value (0).

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01

If this parameter is
set to
BOOLEAN_FALSE
and SI messages
contain a large
BTS3900:
amount of data to
V100R008C00
transmit, system
BTS3900 LTE: Radio L
information may not
V100R002C00
be broadcast to
each UE in the cell
coverage, that is,
cell edge users may
not correctly receive
system information.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.
A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.
A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R001C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.
A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R004C00
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R004C00
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C00
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R008C00
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.

A smaller value
leads to larger cell
coverage but
increased overhead
in the PDSCH. A
larger value leads
BTS3900:
to opposite effects.
V100R008C00
If this parameter is
BTS3900 LTE: Radio L
set to a too small
V100R008C00
value, the code rate
of system
information
transmission cannot
be met for a cell
working on small
bandwidth.

A larger value of
this parameter
results in a smaller
number of
transmissions in a
unit of time and a
smaller amount of BTS3900:
occupied system V100R008C01
resources, but it BTS3900 LTE: Radio L
may also lead to a V100R008C01
longer delay in UE's
acquisition of the
system information.
A smaller value of
this parameter
leads to an
opposite effect.
A larger value of
this parameter
results in a smaller
number of SIB
transmissions in a
unit of time and
also a smaller
amount of system BTS3900:
resources occupied V100R010C00
by the BTS3900 LTE: Radio L
transmissions. V100R010C00
However, this
results in a longer
delay for UEs to
receive the SIB. A
smaller value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a smaller
number of SIB
transmissions in a
unit of time and
also a smaller
amount of system BTS3900:
resources occupied V100R010C00
by the BTS3900 LTE: Radio L
transmissions. V100R010C00
However, this
results in a longer
delay for UEs to
receive the SIB. A
smaller value of this
parameter results in
the opposite
effects.
If this parameter is
set to ON, fewer
PDCCH resources
BTS3900:
are consumed and
V100R009C00
downlink
BTS3900 LTE: Radio L
throughput
V100R009C00
increases. You are
advised to set this
parameter to ON in
comparison tests.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
parameter when the
InnerLoopPuschSwi
tch option of the
UlPcAlgoSwitch
parameter is
cleared. If
PassLossCoeff is
set to a small value,
it is recommended
that
P0NominalPUSCH
be set to a large
value to achieve
higher sector
throughput. If the
PassLossCoeff
parameter is set to BTS3900:
a large value, it is V100R008C00
recommended that BTS3900 LTE: Radio L
P0NominalPUSCH V100R001C00
be set to a small
value to achieve
higher data rates
for CEUs. When the
InnerLoopPuschSwi
tch option of the
UlPcAlgoSwitch
parameter is
selected, a smaller
value of the
PassLossCoeff
parameter results in
lower initial transmit
power of the
PUSCH and lower
interference of the
local cell; a larger

If this parameter
value is too large,
the interference to
neighboring cells
increases and the
overall network
BTS3900:
throughput
V100R008C00
decreases. If this
BTS3900 LTE: Radio L
parameter value is
V100R001C00
too small, the
interference to
neighboring cells
decreases and the
throughput of the
local cell also
decreases.
If this parameter
value is too large,
the interference to
neighboring cells
increases and the
overall network
BTS3900:
throughput
V100R008C00
decreases. If this
BTS3900 LTE: Radio L
parameter value is
V100R001C00
too small, the
interference to
neighboring cells
decreases and the
throughput of the
local cell also
decreases.

A smaller value
results in lower
transmit power in
PUCCH format 1
and lower BTS3900:
interference to V100R008C00
neighboring cells. A BTS3900 LTE: Radio L
larger value results V100R001C00
in higher transmit
power in PUCCH
format 1 and higher
interference to
neighboring cells.

A smaller value
results in lower
transmit power in
PUCCH format 1b
and lower BTS3900:
interference to V100R008C00
neighboring cells. A BTS3900 LTE: Radio L
larger value results V100R001C00
in higher transmit
power in PUCCH
format 1b and
higher interference
to neighboring cells.
A smaller value
results in lower
transmit power in
PUCCH format 2
and lower BTS3900:
interference to V100R008C00
neighboring cells. A BTS3900 LTE: Radio L
larger value results V100R001C00
in higher transmit
power in PUCCH
format 2 and higher
interference to
neighboring cells.

A smaller value
results in lower
transmit power in
PUCCH format 2a
and lower BTS3900:
interference to V100R008C00
neighboring cells. A BTS3900 LTE: Radio L
larger value results V100R001C00
in higher transmit
power in PUCCH
format 2a and
higher interference
to neighboring cells.

A smaller value
results in lower
transmit power in
PUCCH format 2b
and lower BTS3900:
interference to V100R008C00
neighboring cells. A BTS3900 LTE: Radio L
larger value results V100R001C00
in higher transmit
power in PUCCH
format 2b and
higher interference
to neighboring cells.
A relatively small
value of this
parameter may
result in inadequate
transmit power for
message 3, leading
to a reduced
transmit power for
the data channel
and lower BTS3900:
throughput of the V100R008C00
cell. A relatively BTS3900 LTE: Radio L
large value of this V100R001C00
parameter may
result in excessive
transmit power for
message 3, leading
to stronger
interference to
neighboring cells
and lower
throughput of the
network.

A large value of this

parameter indicates
large power carried
in Msg3, increasing
the power of the
PUSCH or PUCCH
after a UE
accesses or is
handed over to the BTS3900:
network. V100R010C10
A small value of this BTS3900 LTE: Radio L
parameter indicates V100R010C10
small power carried
in Msg3,
decreasing the
power of the
PUSCH or PUCCH
after a UE
accesses or is
handed over to the
network.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

ReferenceSignalPw
r is too large,
coverage overlap
occurs. This causes
interference to
other cells. If the
value of
ReferenceSignalPw
r is too small,
coverage holes
appear.
2. Interference: The
setting of
ReferenceSignalPw
r varies with the
interference from
neighboring cells. A BTS3900:
large interference V100R009C00
margin is required BTS3900 LTE: Radio L
in the place where V100R009C00
the interference is
strong.
3. Channel
estimation: A larger
value of
ReferenceSignalPw
r leads to higher
channel estimation
accuracy, a lower
demodulation
threshold, and
higher receiver
sensitivity.
However, it causes
stronger
interference to
neighboring cells.
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
smaller value of the
TimeAlignmentTime
r parameter leads
to more uplink time
alignment
commands
delivered over the
air interface and
more radio
resources
occupied, but it
results in more
prompt tracking and
correction of uplink
timing errors and in
particular better
uplink time
BTS3900:
alignment
V100R008C00
performance for
BTS3900 LTE: Radio L
high-mobility UEs. A
V100R001C00
larger value of the
TimeAlignmentTime
r parameter leads
to opposite effects.
If the
TimingAdvCmdOpt
Switch parameter is
set to ON, it is
recommended that
the
TimeAlignmentTime
r parameter be set
to SF10240. A
smaller value of the
TimeAlignmentTime
r parameter, such
as SF5120, leads to
a higher probability
If this parameter is
set to ON and the
TimeAlignmentTime
r parameter is set to
a value greater than
or equal to SF5120,
the uplink time
alignment
performance is
ensured and the
number of
unnecessary uplink
time alignment
commands
delivered to BTS3900:
motionless or low- V100R008C00
mobility UEs can be BTS3900 LTE: Radio L
reduced to reduce V100R008C00
power consumption
of UEs in DRX
mode.
If this parameter is
set to OFF and the
TimeAlignmentTime
r parameter is set to
a value greater than
or equal to SF5120,
the uplink time
alignment
performance cannot
be ensured,
especially for high-
mobility UEs.
If this parameter is
set to
ALLMEASMODE
and the eNodeB
has not allocated
SRS resources to a
UE, the eNodeB
measures the
uplink timing offset
of the UE based on
CQIs in PUCCH. In
this manner, fewer
control channel BTS3900:
elements (CCEs) in V100R009C00
the PDCCH and BTS3900 LTE: Radio L
physical resource V100R009C00
blocks (PRBs) in
the PUSCH are
consumed for
measuring uplink
timing offset based
on DMRS for
PUSCH, and
therefore the
PDCCH supports
more UEs and the
usage of PRBs in
the uplink
decreases.
frequency, more
radio resources are
consumed, and
more power is
consumed for UEs
in discontinuous
reception (DRX)
state even when
the DRX period is
long. However, UEs
can move at a
higher speed, and
the uplink timing
performance of UEs
in high-speed
mobility can be
ensured. BTS3900:
If this parameter is V100R008C01
set to a larger BTS3900 LTE: Radio L
value, Timing V100R008C01
Advance
Commands are
sent at a lower
frequency, fewer
radio resources are
consumed, and less
power is consumed
for UEs in DRX
state. However,
only UEs move at a
lower speed can be
supported, and the
uplink timing
performance of UEs
in high-speed
mobility cannot be
ensured. In
If this parameter is
set to OFF, a large
number of delivered
unnecessary Timing
Advance
Commands
consumes too
many resources
and especially
decreases downlink
PRB usage and
downlink
throughput due to
limited CCE
overheads in
heavily loaded cells
where there is a
BTS3900:
large number of
V100R009C00
UEs.If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
ON, the number of
unnecessary Timing
Advance
Commands to be
delivered
decreases, which
decreases the
system resource
overheads and
prevents downlink
PRB usage or
downlink
throughput from
being decreased in
heavily loaded cells
where there is a
large number of
UEs.
Comparing with
other parameter
values, set this
parameter to 15
increases the
expected
modulation
performance by 0 to
0.5 dB. Time Offset
compensation on
the PUCCH is not
BTS3900:
enabled for cells
V100R010C10
established on an
BTS3900 LTE: Radio L
LBBPc, and
V100R010C10
therefore this
parameter does not
increase the
modulation
performance. If the
value of this
parameter is not 0,
the statistics about
the TA value of the
PRACH for the
LBBPc are more
accurate.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
A larger value of
this parameter
leads to more
measurement
reports. This BTS3900:
enables UEs to be V100R008C00
handed over more BTS3900 LTE: Radio L
timely and V100R001C01
decreases the call
drop rate. A smaller
value of this
parameter leads to
the opposite effect.
Modifications on
this parameter may
BTS3900:
affect the
V100R008C00
orthogonality of the
BTS3900 LTE: Radio L
preamble
V100R001C00
sequences for the
cell and its
neighboring cells.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
If the CellRadius
parameter value is
too small for a cell,
UEs that are
actually in the cell
coverage but their
locations are
outside the range
BTS3900:
specified by the
V100R008C00
CellRadius
BTS3900 LTE: Radio L
parameter cannot
V100R001C01
access the cell. If
the CellRadius
parameter value is
too large for a cell,
the cell serves
many CEUs. As a
result, the average
cell throughput
decreases.
spectral efficiency,
the number of
available RBs, and
the system capacity
increase. However,
UEs in a cell with a
compact bandwidth
experience higher
inter-RAT
interference than
those in a cell with
the corresponding
standard
bandwidth.
Therefore, the
uplink and downlink
throughput of UEs
BTS3900:
using RBs at both
V100R008C00
ends of the
BTS3900 LTE: Radio L
frequency band in a
V100R003C00
cell with a compact
bandwidth is lower
than that for UEs
using the same
number of RBs in a
cell with the
corresponding
standard
bandwidth.
If Compact
Bandwidth is used,
a constraint is
imposed on the PCI
value range. As a
result, the
probability of PCI
conflict increases.
PCI conflicts result
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

A larger value
results in higher
maximum transmit
power for UEs and
BTS3900:
stronger signal
V100R008C00
strength in the local
BTS3900 LTE: Radio L
cell but higher
V100R001C00
interference to
neighboring cells. A
smaller value leads
to the opposite
effects.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
If the operator sets
this parameter to
DL_ONLY for a cell
in a 3GPP-defined
normal band,
BTS3900:
preparations of
V100R008C00
handovers from
BTS3900 LTE: Radio L
inter-frequency cells
V100R008C00
to this cell and
admissions to this
cell fail, causing
that related traffic
statistics are
abnormal.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
determines the
mapping between
CRS ports and
physical ports.
Downlink multiple-
input multiple-
output (MIMO)
performance is
determined by the
polarization and
spacing between
antennas. Assume
that TX channels in
an RRU and
physical antennas
are connected in
order. Setting this
BTS3900:
parameter to
V100R009C00
NOT_CFG has no
BTS3900 LTE: Radio L
impact on network
V100R009C00
performance.
Setting this
parameter to
recommended
values improves
downlink
throughput,
especially in RRU
combination
networking. Setting
this parameter to
other values may
degrade network
performance. The
recommended
value for this
parameter differs
according to
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

A smaller value of
this parameter
leads to a shorter
measurement
period, better BTS3900:
channel tracing V100R009C00
quality, and larger BTS3900 LTE: Radio L
CSI reference V100R009C00
signal overhead. A
larger value of this
parameter leads to
the opposite
results.
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
information of intra-
frequency
neighboring cells on
the shared
frequency must be
checked on the
OSS before the
intra-frequency
neighboring cells
are added.
If this parameter is
set to
BOOLEAN_FALSE,
the E-UTRAN
frequency is a non-
shared frequency,
and operator
BTS3900:
information of intra-
V100R010C00
frequency
BTS3900 LTE: Radio L
neighboring cells on
V100R010C00
the non-shared
frequency does not
need to be checked
on the OSS before
the intra-frequency
neighboring cells
are added, which
avoids OSS
congestion. Intra-
frequency cells on
the non-shared
frequency can be
added directly
without the shared
operator
information
delivered from the
OSS, thereby
If this parameter is
set to ALLOWED,
ANR can be used
to improve
BTS3900:
maintenance
V100R009C00
efficiency. If this
BTS3900 LTE: Radio L
parameter is set to
V100R009C00
NOT_ALLOWED,
ANR cannot be
used and manual
maintenance is
required.
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A larger value of
this parameter
results in a lower
probability of a BTS3900:
neighbor V100R009C00
relationship being BTS3900 LTE: Radio L
removed. V100R009C00
A smaller value of
this parameter
results in a higher
probability.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A large value of this

parameter
decreases the
possibility that low-
efficiency UEs are
handed over from
the local cell during
inter-frequency
MLB, thereby
decreasing the BTS3900:
average cell V100R010C10
throughput and the BTS3900 LTE: Radio L
number of V100R010C10
handovers. A small
value of this
parameter
increases this
possibility, thereby
increasing the
average cell
throughput and the
number of
handovers.
A large value of this
parameter
decreases the
possibility that low-
efficiency UEs are
handed over from
the local cell during
inter-frequency
MLB, thereby
decreasing the BTS3900:
average cell V100R010C10
throughput and the BTS3900 LTE: Radio L
number of V100R010C10
handovers. A small
value of this
parameter
increases this
possibility, thereby
increasing the
average cell
throughput and the
number of
handovers.
A large value of this
parameter
increases the
accuracy with which
low-efficiency UEs
are identified. In
this case, the BLER
of the UE
decreases, though
the performance of
MLB for low-
efficiency UEs does
not improve
obviously and the
average cell BTS3900:
throughput V100R010C10
decreases. A small BTS3900 LTE: Radio L
value of this V100R010C10
parameter
increases the
accuracy with which
low-efficiency UEs
are identified. In
this case, the
performance of
MLB for low-
efficiency UEs
improves obviously
and the average
cell throughput
increases, though
the BLER of the UE
increases.
A large value of this
parameter
increases the
accuracy with which
low-efficiency UEs
are identified. In
this case, the BLER
of the UE
decreases, though
the performance of
MLB for low-
efficiency UEs does
not improve
obviously and the
average cell BTS3900:
throughput V100R010C10
decreases. A small BTS3900 LTE: Radio L
value of this V100R010C10
parameter
increases the
accuracy with which
low-efficiency UEs
are identified. In
this case, the
performance of
MLB for low-
efficiency UEs
improves obviously
and the average
cell throughput
increases, though
the BLER of the UE
increases.
A large value of this
parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.

A large value of this

parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.
A large value of this
parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.

A large value of this

parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.
A large value of this
parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.

A large value of this

parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.
A large value of this
parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.

A large value of this

parameter
increases the
possibility that a UE
is selected as a
low-efficiency UE,
thereby improving
the performance of
inter-frequency
MLB for low-
BTS3900:
efficiency UEs and
V100R010C10
the average cell
BTS3900 LTE: Radio L
throughput. A small
V100R010C10
value of this
parameter
decreases this
possibility, thereby
decreasing the
performance of
inter-frequency
MLB for low-
efficiency UEs and
the average cell
throughput.
A small value of this
parameter leads to
a slight increase in
the uplink
throughput of UEs
with heavy uplink
traffic and an
increased number BTS3900:
of handovers in a V100R010C10
cell. A large value of BTS3900 LTE: Radio L
this parameter V100R010C10
leads to a great
increase in the
uplink throughput of
UEs with heavy
uplink traffic and a
decreased number
of handovers in a
cell.

A small value of this

parameter leads to
a high probability
that UEs with heavy
uplink traffic are
BTS3900:
transferred during
V100R010C10
MLB, increasing the
BTS3900 LTE: Radio L
uplink throughput of
V100R010C10
UEs and number of
handovers in the
cell. A large value of
this parameter
leads to opposite
effects.

A small value of this

parameter leads to
a high probability
that UEs with heavy
uplink traffic are
BTS3900:
transferred during
V100R010C10
MLB, increasing the
BTS3900 LTE: Radio L
uplink throughput of
V100R010C10
UEs and number of
handovers in the
cell. A large value of
this parameter
leads to opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C01
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

If the setting of this

BTS3900:
parameter matches
V100R010C10
the antenna type,
BTS3900 LTE: Radio L
downlink
V100R010C10
throughput of UEs
is improved.

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
set to a large value,
the MCS index is
high. In this case, if
the spectrum gains
brought by the high-
index MCS are
greater than the
loss due to the
increased
retransmission rate,
the downlink
throughput
increases.
Otherwise, the
downlink
throughput
decreases.If this BTS3900:
parameter is set to V100R010C00
a small value, the BTS3900 LTE: Radio L
MCS index is low V100R010C00
and the
retransmission rate
is small. In this
case, if the
spectrum gains
brought by the low-
index MCS are
smaller than the
gains brought by
the increased
retransmission rate,
the downlink
throughput
increases.
Otherwise, the
downlink
throughput
If this parameter is
set to a large value,
the initial MCS
index for a UE is BTS3900:
high, which may V100R010C00
lead to a high BTS3900 LTE: Radio L
BLER. If this V100R010C00
parameter is set to
a small value, the
initial MCS index for
a UE is low.
If this parameter is
set to a small value,
the CQI is slowly
adjusted. In this
case, if the signal
fluctuates in the
channel, the IBLER
convergence rate is
small. If the channel
does not fluctuate,
the MCS index
fluctuates slightly
after the optimal
MCS index is
achieved.
If this parameter is BTS3900:
set to a large value, V100R010C00
the CQI is fast BTS3900 LTE: Radio L
adjusted. In this V100R010C00
case, if the signal
fluctuates in the
channel, the IBLER
convergence rate is
large, which
increases the
throughput but the
MCS index may
fluctuate greatly.
Therefore, the
parameter must be
set to a value
balancing the CQI
adjustment
efficiency and
accuracy.

If this parameter is
set to a small value,
the filtering is
obvious, but the
channel changes BTS3900:
are hardly traced. If V100R010C00
this parameter is BTS3900 LTE: Radio L
set to a large value, V100R010C00
the capability
against fast fading
is strong, but the
MCS index
fluctuates greatly.
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
NOT_CFG, the
CSI-RS is not
transmitted, which
has no impact on
the network
performance. If this
parameter is set to
FIXED_CFG, a
fixed CSI-RS is
transmitted, which
increases the
average cell
throughput when
there is a high
proportion of TM9-
capable UEs and
decreases the BTS3900:
average cell V100R010C00
throughput when BTS3900 LTE: Radio L
there is low V100R010C00
proportion of TM9-
capable UEs. In
addition, the
parameter value of
FIXED_CFG
causes
performance losses
for TM9-incapable
UEs. If this
parameter is set to
ADAPTIVE_CFG,
the CSI-RS is
configured or not
configured
adaptively based on
the proportion of
TM9-capable UEs,

A smaller value of
this parameter
results in a shorter
measurement
period, better
channel tracing
BTS3900:
quality, larger
V100R010C00
overheads for
BTS3900 LTE: Radio L
measuring CSI
V100R010C00
RSs, and a greater
impact on UEs that
do not support CSI-
RSs. A larger value
of this parameter
results in the
opposite effects.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
throughput when
the number of
RRC_CONNECTE
D UEs supporting
CSI-RS is small and
the ratio of such
UEs is high in the
cell. However, a
smaller value of this
parameter also
results in a higher
probability of ping-
pong switchover
between the CSI-
RS unconfigured
state and the CSI-
RS configured state
BTS3900:
for the cell, which
V100R010C10
increases the
BTS3900 LTE: Radio L
number of RRC
V100R010C10
connection
reconfigurations
and may even
increase the service
drop rate in the cell.
A larger value of
this parameter
results in a larger
number of
RRC_CONNECTE
D UEs supporting
CSI-RS required for
entering the CSI-
RS configured
state, and fewer
RRC connection
reconfigurations
and a lower service
entering the CSI-
RS unconfigured
state, and a larger
increase in cell
downlink
throughput when
the number of
RRC_CONNECTE
D UEs supporting
CSI-RS is large and
the ratio of such
UEs is low in the
cell. However, the
number of RRC
connection
reconfigurations
increases, and the
BTS3900:
service drop rate in
V100R008C01
the cell may even
BTS3900 LTE: Radio L
increase.
V100R008C01
A larger value of
this parameter
results in a larger
number of
RRC_CONNECTE
D UEs supporting
CSI-RS required for
entering the CSI-
RS unconfigured
state, and fewer
RRC connection
reconfigurations
and a lower service
drop rate in cells
where the number
of
RRC_CONNECTE
D UEs supporting
indicates a lower
threshold
requirement for
entering the CSI-
RS configured
state. It results in
higher downlink
throughput of UEs
supporting CSI-RS
but lower downlink
throughput of UEs
not supporting CSI-
RS.
A larger value of
this parameter
indicates a higher
threshold BTS3900:
requirement for V100R010C10
entering the CSI- BTS3900 LTE: Radio L
RS configured V100R010C10
state. It results in
lower downlink
throughput of UEs
supporting CSI-RS
but higher downlink
throughput of UEs
not supporting CSI-
RS.
This parameter
value can be set
based on the ratio
of
RRC_CONNECTE
D UEs supporting
CSI-RS in the cell
to optimize
downlink
ratio of UEs not
supporting CSI-RS
for entering the
CSI-RS
unconfigured state.
It results in higher
downlink
throughput of UEs
supporting CSI-RS
but lower downlink
throughput of UEs
not supporting CSI-
RS.
A smaller value of
this parameter
indicates a lower
ratio of UEs not BTS3900:
supporting CSI-RS V100R008C01
for entering the BTS3900 LTE: Radio L
CSI-RS V100R008C01
unconfigured state.
It results in lower
downlink
throughput of UEs
supporting CSI-RS
but higher downlink
throughput of UEs
not supporting CSI-
RS.
This parameter
value can be set
based on the ratio
of
RRC_CONNECTE
D UEs supporting
CSI-RS in the cell
to optimize
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
If this parameter is
set to a larger
value, neighboring
cells perform SRS
measurements on
UEs in the serving
cell at a lower
frequency, and the
system load
decreases.
However, BTS3900:
neighboring cells V100R008C01
perform delayed BTS3900 LTE: Radio L
SRS measurements V100R008C01
on UEs that newly
access the serving
cell and more
unnecessary SRS
measurements on
UEs that already
exit the serving cell.
A smaller value of
this parameter
leads to the
opposite effects.

A larger value of
this parameter
leads to a lower
frequency that a
neighboring cell
reports the uplink
BTS3900:
RSRP
V100R008C01
measurements to
BTS3900 LTE: Radio L
the serving cell and
V100R008C01
a lighter system
load, but untimely
updates of user
information. A
smaller value leads
to the opposite
effects.
A larger value of
this parameter
leads to a smaller
impact of the
previous CQI value
BTS3900:
but a greater impact
V100R008C01
of the CQI value
BTS3900 LTE: Radio L
reported this time
V100R008C01
on the filtering
result. A smaller
value of this
parameter leads to
the opposite
effects.
A larger value of
this parameter
leads to a smaller
impact of the
previous RSRP
value on the filtered BTS3900:
value and a larger V100R008C01
impact of the RSRP BTS3900 LTE: Radio L
value reported this V100R008C01
time on the filtered
value. A smaller
value of this
parameter leads to
the opposite
effects.
A larger value of
this parameter
leads to a smaller
impact of the
previous RSRP
value on the filtered BTS3900:
value and a larger V100R008C01
impact of the RSRP BTS3900 LTE: Radio L
value reported this V100R008C01
time on the filtered
value. A smaller
value of this
parameter leads to
the opposite
effects.
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

A larger value of
this parameter
leads to a longer
interval at which
periodic DL ICIC
measurement
reports are sent,
hence fewer BTS3900:
measurement V100R008C00
reports and BTS3900 LTE: Radio L
untimely update of V100R003C00
UE locations, and a
smaller average
throughput of cell
edge users (CEUs).
A smaller value of
this parameter
leads to the
opposite effects.

A larger value of
this parameter
leads to a larger
maximum number
of neighboring cells
that participate in
each DL ICIC
measurement
report, hence a
more accurate
estimation of
interference from
neighboring cells
and better service
BTS3900:
quality and larger
V100R008C00
average throughput
BTS3900 LTE: Radio L
of cell edge users
V100R003C00
(CEUs);
correspondingly,
higher power
consumption will be
required for UE
measurement and
more singling
overheads will be
required for
measurement
reporting. A smaller
value of this
parameter leads to
the opposite
effects.
leads to more
power consumption
of the UE, enables
the timely tracing of
interference from
neighboring cells on
cell edge users
(CEUs). In this
situation, the
interference-
inducing
neighboring cell can
be accurately
determined, which
increases the
throughput gain for
CEUs. A smaller BTS3900:
value of this V100R008C00
parameter leads to BTS3900 LTE: Radio L
less power V100R003C00
consumption of UE,
but affects the
timely tracing of
interference from
neighboring cells on
CEUs. In this
situation, the
interference-
inducing
neighboring cell
cannot be
accurately
determined, which
may decrease the
throughput gain for
CEUs and even
decrease the

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
A larger value
results in lower
probabilities of
BTS3900:
triggering a
V100R008C00
downlink ICIC
BTS3900 LTE: Radio L
measurement event
V100R003C00
and stopping the
event. A smaller
value leads to the
opposite effects.

A larger value
results in lower
probabilities of
BTS3900:
triggering a
V100R008C00
downlink ICIC
BTS3900 LTE: Radio L
measurement event
V100R003C00
and stopping the
event. A smaller
value leads to the
opposite effects.
A larger value
results in a lower
probability of
reporting a
downlink ICIC
measurement
event, a smaller
number of UEs that
report the related
measurements, and
fewer signaling
messages over the
Uu interface. As a
result, service
quality for CEUs
deteriorates, and
BTS3900:
the CEU throughput
V100R008C00
and cell capacity
BTS3900 LTE: Radio L
decrease. A smaller
V100R003C00
value results in a
higher probability of
reporting a
downlink ICIC
measurement
event, a larger
number of UEs that
report the related
measurements, and
more signaling
messages over the
Uu interface. As a
result, more UEs
occupy cell edge
bands, and the
CEU throughput
decreases.
A larger value
results in a lower
probability of
reporting a
downlink ICIC
measurement
event, a smaller
number of UEs that
report the related
measurements, and
fewer signaling
messages over the
Uu interface. As a
result, service
quality deteriorates
for carrier
aggregation (CA)
BTS3900:
CEUs, and the CEU
V100R008C00
throughput and cell
BTS3900 LTE: Radio L
capacity decrease.
V100R008C00
A smaller value
results in a higher
probability of
reporting a
downlink ICIC
measurement
event, a larger
number of UEs that
report the related
measurements, and
more signaling
messages over the
Uu interface. As a
result, more UEs
occupy cell edge
bands, and the
throughput of CA
CEUs decreases. BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

A larger value of
this parameter
leads to more
spectrum resources
that can be used by BTS3900:
the eNodeB and V100R009C00
larger downlink BTS3900 LTE: Radio L
capacity of the E- V100R009C00
UTRAN cell. A
smaller value of this
parameter leads to
the opposite
effects.
A larger value of
this parameter
leads to more
spectrum resources
that can be used by BTS3900:
the eNodeB and V100R009C00
larger downlink BTS3900 LTE: Radio L
capacity of the E- V100R009C00
UTRAN cell. A
smaller value of this
parameter leads to
the opposite
effects.

If this parameter is
set to ON,
interference from
the E-UTRAN cell
to GERAN cells
decreases,
improving the
GERAN cell BTS3900:
performance. If this V100R009C00
parameter is set to BTS3900 LTE: Radio L
OFF, interference V100R009C00
from the E-UTRAN
cell to GERAN cells
increases,
increasing GSM
transmit power and
deteriorating the E-
UTRAN cell
performance.
set to NONE,
interference from
GSM is not
restricted and
therefore may affect
the full band of LTE
and decrease the
uplink throughput of
LTE.
If this parameter is
set to
BASEBANDPROC
ESS, the
interference scope
of GSM is
compressed and
only RBs close to
BTS3900:
the GSM spectrum
V100R009C00
are affected. As a
BTS3900 LTE: Radio L
result, RBs far away
V100R009C00
from the GSM
spectrum and RBs
in the LTE spectrum
can work properly
and the uplink
throughput of LTE
improves.
If this parameter is
set to
ADAPTIVEPROCE
SS, the interference
that the uplink LTE
spectrum
experiences from
the GSM spectrum
further decreases
and the uplink
throughput of LTE
A larger value of
this parameter
leads to a lower
probability of UEs
reporting event A3
used in GSM and
LTE dynamic
spectrum sharing,
thereby decreasing
downlink
throughput of cell
edge users (CEUs)
and downlink
capacity of the E-
UTRAN cell.
BTS3900:
A smaller value of
V100R009C00
this parameter
BTS3900 LTE: Radio L
leads to a higher
V100R009C00
probability of UEs
reporting event A3
used in GSM and
LTE dynamic
spectrum sharing.
In this case, more
UEs report A3
measurements,
thereby increasing
overheads in the
physical uplink
shared channel
(PUSCH) and
decreasing uplink
capacity of the E-
UTRAN cell.
A larger value of
this parameter
leads to a lower
probability of UEs
reporting event A6
used in GSM and
LTE dynamic
spectrum sharing,
thereby decreasing
downlink
throughput of cell
edge users (CEUs)
and downlink
capacity of the
SCell.
BTS3900:
A smaller value of
V100R009C00
this parameter
BTS3900 LTE: Radio L
leads to a higher
V100R009C00
probability of UEs
reporting event A6
used in GSM and
LTE dynamic
spectrum sharing.
In this case, more
UEs report event
A6, thereby
increasing
overheads in the
physical uplink
shared channel
(PUSCH) and
decreasing uplink
capacity of the
SCell.
A larger value of
this parameter
leads to fewer RBs
in the shared
spectrum that can
be used by UEs
that are located at
short distances
away from the
center of the E-
UTRAN cell,
decreasing the RB
usage in the shared BTS3900:
spectrum and V100R009C00
downlink capacity BTS3900 LTE: Radio L
when GSM and LTE V100R009C00
dynamic spectrum
sharing is enabled.
A smaller value of
this parameter
leads to the
opposite effects.
However, the block
error rate (BLER) of
RBs in the shared
spectrum increases,
thereby raising
interference to the
GERAN cell.
A larger value of
this parameter
leads to fewer RBs
in the shared
spectrum that can
be used by UEs
that are located at
medium distances
away from the
center of the E-
UTRAN cell,
decreasing the RB
usage in the shared BTS3900:
spectrum and V100R009C00
downlink capacity BTS3900 LTE: Radio L
when GSM and LTE V100R009C00
dynamic spectrum
sharing is enabled.
A smaller value of
this parameter
leads to the
opposite effects.
However, the block
error rate (BLER) of
RBs in the shared
spectrum increases,
thereby raising
interference to the
GERAN cell.
A larger value of
this parameter
leads to fewer RBs
in the shared
spectrum that can
be used by UEs
that are located at
far distances away
from the center of
the E-UTRAN cell,
decreasing the RB
usage in the shared
BTS3900:
spectrum and
V100R009C00
downlink capacity
BTS3900 LTE: Radio L
when GSM and LTE
V100R009C00
dynamic spectrum
sharing is enabled.
A smaller value of
this parameter
leads to the
opposite effects.
However, the block
error rate (BLER) of
RBs in the shared
spectrum increases,
thereby raising
interference to the
GERAN cell.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

A larger parameter
value leads to a
lower frequency to
export the
proportion of time
BTS3900:
that the cell is in the
V100R009C00
congestion state
BTS3900 LTE: Radio L
and longer time to
V100R009C00
relieve cell load, but
a smaller impact on
user experience. A
smaller parameter
value leads to the
opposite effects.
A larger parameter
value leads to a
lower probability of
triggering dynamic BTS3900:
AC barring and V100R009C00
relieving cell load, BTS3900 LTE: Radio L
but a smaller impact V100R009C00
on user experience.
A smaller parameter
value leads to the
opposite effects.

A larger parameter
value leads to a
higher probability of
canceling dynamic
BTS3900:
AC barring and a
V100R009C00
lower probability of
BTS3900 LTE: Radio L
relieving cell load,
V100R009C00
but a smaller impact
on user experience.
A smaller parameter
value leads to the
opposite effects.

A smaller value of
this parameter
results in a higher
probability of
triggering intelligent
access barring on
specific services,
and therefore more
UEs running
multimedia
telephony (MMTEL)
voice services or BTS3900:
MMTEL video V100R010C10
services are BTS3900 LTE: Radio L
rejected and user V100R010C10
experience of more
UEs is affected.
However, a smaller
value of this
parameter results in
a larger increase in
the eNodeB
stability. A larger
value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in a higher
probability of
canceling intelligent
access barring on
specific services,
and therefore fewer
UEs running
multimedia
telephony (MMTEL)
voice services or BTS3900:
MMTEL video V100R010C10
services are BTS3900 LTE: Radio L
rejected and user V100R010C10
experience of fewer
UEs is affected.
However, a smaller
value of this
parameter results in
a smaller increase
in the eNodeB
stability. A larger
value of this
parameter results in
the opposite
effects.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
A smaller value of
this parameter
results in a higher
probability of
triggering intelligent
access class control
on MO calls or
signaling, more UEs
that initiate MO BTS3900:
calls or signaling to V100R010C10
be barred to BTS3900 LTE: Radio L
access, user V100R010C10
experience of more
UEs to be affected,
and a larger
increase in the
eNodeB stability. A
larger value of this
parameter results in
the opposite
effects.

A smaller value of
this parameter
results in a higher
probability of
cancelling
intelligent access
class control on MO
calls or signaling,
fewer UEs that
BTS3900:
initiate MO calls or
V100R010C10
signaling to be
BTS3900 LTE: Radio L
barred to access,
V100R010C10
user experience of
fewer UEs to be
affected, and a
smaller increase in
the eNodeB
stability. A larger
value of this
parameter results in
the opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
After TDM eICIC is
enabled in a
HetNet, an
appropriate ABS
pattern (which is
chosen based on
the resource
elements
configured for micro
cells) does not BTS3900:
decrease the V100R008C00
average downlink BTS3900 LTE: Radio L
throughput and V100R008C00
therefore increases
the downlink cell
edge throughput of
the entire network;
an inappropriate
ABS patter
decreases the
downlink
throughput of the
entire network.

If this parameter is
set to ENABLE,
UEs are allowed to
send measurement BTS3900:
reports for event A3 V100R009C00
during eICIC, BTS3900 LTE: Radio L
increasing V100R009C00
overheads in the
PUSCH and
decreasing uplink
capacity of the cell.
A larger value of
this parameter
results in a lower
probability of
reporting event A3
during eICIC and
accordingly a
smaller number of
UEs that report the
related
measurements. As
a result, service
quality is not
guaranteed for cell
edge users (CEUs), BTS3900:
causing drops in V100R009C00
CEU throughput BTS3900 LTE: Radio L
and cell capacity. A V100R009C00
smaller value of this
parameter results in
a higher probability
of reporting event
A3 during eICIC
and accordingly a
larger number of
UEs that report the
related
measurements,
increasing
overheads in the
PUSCH and
decreasing uplink
capacity of the cell.

A larger parameter
value results in a
lower frequency of
adjusting the ABS BTS3900:
patterns of macro V100R010C10
and micro cells and BTS3900 LTE: Radio L
therefore a lower V100R010C10
system load. A
smaller parameter
value results in the
opposite effects.
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
A larger value of
this parameter
leads to a lower
probability of
triggering the report
of the measurement
event for IICS UE
attribute calculation
and accordingly
fewer UEs report
the measurement
event. As a result,
less signaling is
traced over the air
interface, and less
intra-eNodeB A3
events are used for
BTS3900:
UE attribute
V100R008C01
calculation. A
BTS3900 LTE: Radio L
smaller value of this
V100R008C01
parameter leads to
a higher probability
of triggering the
report of the
measurement event
for IICS UE
attribute calculation
and accordingly
more UEs report
the measurement
event. As a result,
more signaling is
traced over the air
interface, and more
intra-eNodeB A3
events are used for
UE attribute
calculation.
If UlI2csAlgoSwitch
is turned on in
scenarios where
UEs are mainly
affected by
interference and the
cell is heavily
loaded, the
icsUserAttrThd
parameter value
affects the user
attribute BTS3900:
determination V100R008C01
results. If this BTS3900 LTE: Radio L
parameter is set to V100R008C01
a smaller value,
more UEs are
considered to have
strong interference
to neighboring cells.
If this parameter is
set to a larger
value, more UEs
are considered to
have weak
interference to
neighboring cells.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
 BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R004C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
If the SINR-based
SRS power control
is used, the weight
evaluation accuracy
of beamforming and
downlink CoMP
UEs can be
improved. In this
case, there is a
high probability that
the performance is
improved but the
number of
RRCReconfig
BTS3900:
messages
V100R009C00
increases.
BTS3900 LTE: Radio L
If the SRS power
V100R009C00
control algorithm
based on the
converged SINR
and RSRP is used,
the number of
RRCReconfig
messages is
decreased with
guaranteed weight
evaluation accuracy
of beamforming and
downlink CoMP
UEs (guaranteed
performance of
BF/DL CoMP UEs).
set to
NOT_USE_P0NOM
INALPUCCH,
changing the
P0NominalPUCCH
value affects user
performance only in
the initial access
phase. Consider
that this parameter
is set to
USE_P0NOMINAL
PUCCH and
interference on the
PUCCH is strong. If
the
P0NominalPUCCH BTS3900:
parameter is set to V100R009C00
a larger value, the BTS3900 LTE: Radio L
PUCCH power V100R009C00
received from cell
center users
(CCUs) increases,
which generates
stronger uplink
interference. As a
result, downlink
throughput of CCUs
increases, and
downlink
throughput of cell
edge users (CEUs)
decreases. A
smaller value of the
P0NominalPUCCH
parameter results in
the opposite
A smaller value of
this parameter
results in faster
adjustments of
power control for BTS3900:
the PUCCH and a V100R009C00
higher probability of BTS3900 LTE: Radio L
ping-pong V100R009C00
adjustments. A
larger value of this
parameter results in
the opposite
effects.
A smaller value of
this parameter
results in lower
PUCCH power
transmitted by UEs
in the local cell and BTS3900:
weaker PUCCH V100R009C00
interference on BTS3900 LTE: Radio L
other UEs in the V100R009C00
cell and UEs in
neighboring cells. A
larger value of this
parameter results in
the opposite
effects.

A smaller value of
this parameter
results in a lower
probability that the
uplink received
power at repeaters
is saturated in the BTS3900:
presence of uplink V100R009C00
interference and BTS3900 LTE: Radio L
also lower uplink V100R009C00
throughput when
the uplink received
power at repeaters
is not saturated. A
larger value of this
parameter receives
opposite effects.
set to a smaller
value, more UEs
report the A3 event
in IoT-based power
control, and more
signaling messages
are generated over
the interface, and
UEs enter the IoT-
based power
control more easily.
In this case,
network
interference is
reduced, and the
access success
rate and throughput
BTS3900:
of CEUs are
V100R009C00
increased.
BTS3900 LTE: Radio L
If this parameter is
V100R009C00
set to a larger
value, fewer UEs
report the A3 event
in IoT-based power
control, and fewer
signaling messages
are generated over
the interface, and
UEs enter the IoT-
based power
control more
difficultly. In this
case, network
interference cannot
be reduced and the
access success
rate and throughput
of CEUs cannot be
this parameter be
set to ON.
In scenarios where
the IoT value is
greater than 7 dB, if
this parameter is
set to OFF, the
eNodeB does not
deliver event A3
measurement
configuration to
optimize the uplink
throughput of
CCUs. In this case,
the interference
suppression effect
of IoT power control
BTS3900:
is better than that
V100R008C01
when this
BTS3900 LTE: Radio L
parameter is set to
V100R008C01
ON, the network
entry success rate
of CEUs increases,
but there is a high
probability that the
average cell
throughput
decreases.
In scenarios where
the IoT value is
greater than 7 dB, if
this parameter is
set to ON, the
eNodeB delivers
event A3
measurement
configuration to
optimize the uplink
the IoT value is
greater than 7 dB,
there is a lower
probability that the
uplink throughput
decreases after IoT
power control is
enabled, the IoT
suppression effect
is less obvious, the
event A3
measurement
configurations are
sent to more UEs,
and there are more
signaling messages
over the air BTS3900:
interface. V100R010C10
If this parameter is BTS3900 LTE: Radio L
set to a smaller V100R010C10
value in scenarios
where the IoT value
is greater than 7
dB, there is a
higher probability
that the uplink
throughput
decreases after IoT
power control is
enabled, the IoT
suppression effect
is more obvious,
the event A3
measurement
configurations are
sent to fewer UEs,
and there are fewer
A smaller parameter
value leads to a
smaller target SINR
value for SRS
power control,
smaller SRS
transmit power, and
poorer uplink SRS BTS3900:
receive V100R010C10
performance of the BTS3900 LTE: Radio L
local cell. A larger V100R010C10
parameter value
leads to a larger
target SINR value,
and larger SRS
transmit power but
stronger
interference on
neighboring cells.
A smaller parameter
value leads to a
smaller target
RSRP value for
SRS power control,
smaller SRS
transmit power, and
poorer uplink SRS BTS3900:
receive V100R010C10
performance of the BTS3900 LTE: Radio L
local cell. A larger V100R010C10
parameter value
leads to a larger
target RSRP value,
and larger SRS
transmit power but
stronger
interference on
neighboring cells.

When the
SchedulerCtrlPower
Switch(SchedulerCt
rlPowerSwitch)
check box under
the UlSchSwitch
parameter is
selected, a larger
parameter value
leads to higher
transmit power
spectral density,
BTS3900:
uplink throughput,
V100R010C10
and power
BTS3900 LTE: Radio L
consumption of
V100R010C10
normal UEs but
stronger inter-cell
interference.
A smaller parameter
value leads to
weaker inter-cell
interference but
lower transmit
power spectral
density, uplink
throughput, and
power consumption
of normal UEs.
If this parameter is
set to Us and
optimized closed-
loop power control
for UEs near the
cell center is
enabled, the uplink
power consumption
and average uplink
throughput of UEs
near the cell center
that run unlimited
services increase,
and the interference
on neighboring cells
is weak.
If this parameter is
BTS3900:
set to ULBigPkt and
V100R010C10
optimized closed-
BTS3900 LTE: Radio L
loop power control
V100R010C10
for UEs near the
cell center is
enabled, the uplink
power consumption
and average uplink
throughput of UEs
near the cell center
that run services
with large packets
in the uplink
increase, and the
interference on
neighboring cells is
weak.
If this parameter is
set to UsOrUlBigPkt
and optimized
closed-loop power
When the
CloseLoopOptPUS
CHSwitch(CloseLoo
pOptPUSCHSwitch)
check box under
the UlPcAlgoSwitch
parameter is
selected, a larger
parameter value
leads to higher
target BLER to be
approached and
lower interference
on neighboring
cells, but the
BTS3900:
transmit power,
V100R010C10
power
BTS3900 LTE: Radio L
consumption, and
V100R010C10
uplink throughput of
UEs near the cell
center are lower.
A smaller parameter
value leads to lower
target BLER to be
approached and
higher transmit
power, power
consumption, and
uplink throughput of
UEs near the cell
center, but the
interference on
neighboring cells is
stronger.
When the
SchedulerCtrlPower
Switch(SchedulerCt
rlPowerSwitch)
check box under
the UlSchSwitch
parameter is
selected, a larger
parameter value
leads to higher
transmit power
spectral density,
uplink throughput,
BTS3900:
and power
V100R010C10
consumption of
BTS3900 LTE: Radio L
UEs running
V100R010C10
unlimited services
but stronger inter-
cell interference.
A smaller parameter
value leads to
weaker inter-cell
interference but
lower transmit
power spectral
density, uplink
throughput, and
power consumption
of UEs running
unlimited services.
If this parameter is
set to ON, uplink
demodulation gain
is considered for
determining
whether to enable
interference-based
uplink power
control. As a result,
it is more difficult to
enable interference-
based uplink power
control and
throughput loss is
less likely to occur
BTS3900:
after uplink power
V100R010C10
control is enabled.
BTS3900 LTE: Radio L
If this parameter is
V100R010C10
set to OFF, uplink
demodulation gain
is not considered
for determining
whether to enable
interference-based
uplink power
control. As a result,
it is easier to enable
interference-based
uplink power control
and throughput loss
is more likely to
occur after uplink
power control is
enabled.

A small value of this

parameter
increases both the
number of CEUs for
interference
coordination and
BTS3900:
the interference of
V100R010C10
these CEUs.
BTS3900 LTE: Radio L
A large value of this
V100R010C10
parameter
decreases both the
number of CEUs for
interference
coordination and
the interference of
these CEUs.
If this parameter is
set to a large value,
interference-based
uplink power control
is less likely to be
enabled, the
interference
suppression effect
is less significant,
and uplink
throughput loss is
less likely to occur
after interference-
BTS3900:
based uplink control
V100R010C10
is enabled.
BTS3900 LTE: Radio L
If this parameter is
V100R010C10
set to a small value,
interference-based
uplink power control
is more likely to be
enabled, the
interference
suppression effect
is more significant,
and uplink
throughput loss is
more likely to occur
after interference-
based uplink control
is enabled.

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

If this parameter is
set to a large value,
load balancing
cannot be triggered
when the load is
high. If this
parameter is set to BTS3900:
a small value, V100R009C00
excessive signaling BTS3900 LTE: Radio L
interactions and V100R009C00
handovers are
caused due to
premature
triggering of load
balancing based on
the PRB evaluation
value.
If this parameter is
set to a large value,
the target cell
allows MLB-based
incoming UEs when
the load is high. If
BTS3900:
this parameter is
V100R009C00
set to a small value,
BTS3900 LTE: Radio L
the target cell
V100R009C00
rejects MLB-based
incoming UEs due
to premature
triggering of the
load balancing
based on the PRB
evaluation value.

If this parameter is
set to a large value,
a small number of
UEs are selected
for MLB, and the
MLB is difficult to be
triggered, which
cannot help BTS3900:
maximize the cell V100R009C00
throughput rate. If BTS3900 LTE: Radio L
this parameter is V100R009C00
set to a small value,
a large number of
UEs are selected
for MLB, and the
MLB is easy to be
triggered, which
helps maximize the
cell throughput rate.

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
If PRACH false
alarm detection is
disabled or this
parameter is set to
0, the network
performance is not
affected.
If PRACH false
alarm detection is
enabled, a larger
non-zero value of
this parameter
BTS3900:
leads to a lower
V100R008C01
probability that the
BTS3900 LTE: Radio L
eNodeB correctly
V100R008C01
detects false
alarms, and
accordingly a lower
probability that
contention-based
preambles are
mistakenly
considered as false
alarms; a smaller
non-zero value of
this parameter
leads to the
opposite effects.
affected.
If PRACH false
alarm detection is
disabled, a larger
non-zero value of
this parameter
leads to a lower
probability that
preambles are
detected, and
accordingly a lower
probability that
preambles are
considered as false
alarms; a smaller
non-zero value of
this parameter
BTS3900:
leads to the
V100R008C01
opposite effects.
BTS3900 LTE: Radio L
If PRACH false
V100R008C01
alarm detection is
enabled, a larger
non-zero value of
this parameter
leads to a higher
probability that
preambles are
considered as false
alarms, a longer
delay for UEs to
send contention-
based preambles,
and accordingly a
higher probability of
contention-based
access failures; a
smaller non-zero
value of this BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
A small value of this
parameter
increases the
speed of PRACH
frequency domain
position adjustment
and the response
speed of an
eNodeB towards
interference.
However, it also
increases the
signaling overheads
BTS3900:
and number of
V100R010C10
ping-pong
BTS3900 LTE: Radio L
adjustments. A
V100R010C10
large value of this
parameter slows
down the speed of
PRACH frequency
domain position
adjustment and the
response speed of
an eNodeB towards
interference.
However, it reduces
the signaling
overheads and
number of ping-
pong adjustments.

A large value of this

parameter
decreases the
possibility that
PRACH
interference
avoidance is
triggered by the
eNodeB for severe
BTS3900:
PRACH
V100R010C10
interference. A
BTS3900 LTE: Radio L
small value of this
V100R010C10
parameter
increases the
possibility that
PRACH
interference
avoidance is
triggered by the
eNodeB for severe
PRACH
interference.
A large value of this
parameter
effectively reduces
the ping-pong effect
due to interference
fluctuation and
decreases the
possibility of state
BTS3900:
transition between
V100R010C10
severe and weak
BTS3900 LTE: Radio L
PRACH
V100R010C10
interference. A
small value of this
parameter
increases the
possibility of state
transition between
severe and weak
PRACH
interference.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
If the value of this
parameter is too
small, the
admission threshold
is too low for the
handed-over
service with QCI of
1. In this case, the
QoS of the existing
services cannot be BTS3900:
guaranteed. V100R008C00
If the value of this BTS3900 LTE: Radio L
parameter is too V100R001C01
large, the
admission threshold
is too high for the
handed-over
service with QCI of
1. In this case, the
admission success
rate is low for
services with QCI of
1.

If the value of this

parameter is too
small, the
admission threshold
is too low for the
handed-over
service with QCI of
2. In this case, the
QoS of the existing
services cannot be BTS3900:
guaranteed. V100R008C00
If the value of this BTS3900 LTE: Radio L
parameter is too V100R001C01
large, the
admission threshold
is too high for the
handed-over
service with QCI of
2. In this case, the
admission success
rate is low for
services with QCI of
2.
If the value of this
parameter is too
small, the
admission threshold
is too low for the
handed-over
service with QCI of
3. In this case, the
QoS of the existing
services cannot be BTS3900:
guaranteed. V100R008C00
If the value of this BTS3900 LTE: Radio L
parameter is too V100R001C01
large, the
admission threshold
is too high for the
handed-over
service with QCI of
3. In this case, the
admission success
rate is low for
services with QCI of
3.

If the value of this

parameter is too
small, the
admission threshold
is too low for the
handed-over
service with QCI of
4. In this case, the
QoS of the existing
services cannot be BTS3900:
guaranteed. V100R008C00
If the value of this BTS3900 LTE: Radio L
parameter is too V100R001C01
large, the
admission threshold
is too high for the
handed-over
service with QCI of
4. In this case, the
admission success
rate is low for
services with QCI of
4.
If the value of this
parameter is too
small, the
admission threshold
is too low for new
Gold-level services
of all QCIs. In this
case, the Gold-level
services occupy too
many system
resources, and
Silver- and Bronze-
level services BTS3900:
cannot be admitted. V100R008C00
This affects the BTS3900 LTE: Radio L
access success V100R001C01
rates of the Silver-
or Bronze-level
services of all QCIs.
If the value of this
parameter is too
large, the
admission threshold
is too high for new
Gold-level services.
In this case, the
access success
rate is low for Gold-
level services.
If the value of this
parameter is too
small, the
admission threshold
is too low for new
Silver-level services
of all QCIs. In this
case, the Gold- and
Silver-level services
occupy too many
system resources,
and Bronze-level
services cannot be BTS3900:
admitted. This V100R008C00
affects the access BTS3900 LTE: Radio L
success rates of the V100R001C01
Bronze-level
services of all QCIs.
If the value of this
parameter is too
large, the
admission threshold
is too high for new
Silver-level
services. In this
case, the access
success rate is low
for Silver-level
services.
A smaller value of
the parameter leads
to a lower
admission threshold
for new Bronze-
level services of all
QCIs. This may
cause excessive
service admission
and hence affect BTS3900:
the QoS of the V100R008C00
admitted services. BTS3900 LTE: Radio L
A larger value of the V100R001C01
parameter results in
a higher admission
threshold for new
Bronze-level
services of all QCIs,
which may
decrease the
access success
rate of Bronze-level
services.
A larger value of
this parameter
leads to a higher
probability of
system congestion.
In this situation, the
system resource
usage and the
access success
rate are low.
A smaller value of
this parameter
leads to a lower
probability of
generating
BTS3900:
congestion
V100R008C00
indications and
BTS3900 LTE: Radio L
therefore a higher
V100R001C01
access success
rate. If the value is
small, an excessive
number of users
may be admitted,
but the load control
actions are not
taken in time to
relieve the
congestion. In this
situation, the overall
QoS satisfaction
rate of the existing
services decreases
and the call drop
rate increases.
A larger value of
this parameter
results in a higher
probability of
system congestion.
If the value is large,
the system
resource usage and
the access success
rate are low.
A smaller value of
this parameter
results in a lower
probability of
generating
BTS3900:
congestion
V100R008C00
indications and
BTS3900 LTE: Radio L
hence a higher
V100R001C01
access success
rate. If the value is
small, an excessive
number of users
might be admitted,
but the load control
actions are not
taken in time to
relieve the
congestion. In this
case, the overall
QoS satisfaction
rate of the existing
services drops and
the call drop rate
rises.
A larger value of
this parameter
leads to a higher
probability of
system congestion.
In this case, the
system resource
utilization and the
access success
rate are low.
A smaller value of
this parameter
leads to a lower
probability of
generating
BTS3900:
congestion
V100R008C00
indications and
BTS3900 LTE: Radio L
hence a higher
V100R001C01
access success
rate. If the value is
small, an excessive
number of users
might be admitted,
but the load control
actions are not
taken in time to
relieve the
congestion. In this
case, the overall
QoS satisfaction
rate of the existing
services drops and
the call drop rate
rises.
A larger value of
this parameter
indicates a higher
probability of
system congestion.
If the value is large,
the system
resource usage and
the access success
rate are low.
A smaller value of
this parameter
leads to a lower
probability of
generating
BTS3900:
congestion
V100R008C00
indications and
BTS3900 LTE: Radio L
hence a higher
V100R001C01
access success
rate. If the value is
small, an excessive
number of users
might be admitted,
but the load control
actions are not
taken in time to
relieve the
congestion. In this
case, the overall
QoS satisfaction
rate of the existing
services drops and
the call drop rate
rises.
A larger value of
this parameter
leads to a lower
probability of
congestion relief. In
the case of
congestion,
services are BTS3900:
released as a load V100R008C00
control action. BTS3900 LTE: Radio L
A smaller value of V100R001C01
this parameter
results in a higher
probability of
congestion relief,
but it may lead to
frequent switching
between overload
and overload relief.
probability of
generating the high
usage indication of
UL RBs, which may
cause excessive
admission, but the
protection over
resource allocation
is performed after
the admission
decision. In
addition, when the
value of the
parameter is too
large, load control
actions are taken
more slowly. BTS3900:
A smaller value of V100R008C00
this parameter BTS3900 LTE: Radio L
leads to a higher V100R001C01
probability of
generating the high
usage indication of
UL RBs, but the
satisfaction rates
are compared
further to make
admission
decisions.
Therefore, the
parameter has no
obvious impact on
admission. In
addition, when the
value of the
parameter is too
small, excessive
usage indication of
UL RBs, which may
cause excessive
admission, but the
protection for
resource allocation
is performed after
the admission
decision. Therefore,
this parameter does
not affect the the
overall QoS
satisfaction rate
much.
A smaller value of
this parameter
leads to a lower
BTS3900:
probability of
V100R008C00
generating the low
BTS3900 LTE: Radio L
usage indication of
V100R001C01
UL resources
resource blocks
and hence a lower
admission success
rate, but the
protection for
resource allocation
is performed after
the admission
decision. Therefore,
this parameter has
no obvious impact
on admission. In
addition, when the
value of the
parameter is small,
the load control
algorithm may
A smaller value of
this parameter
leads to less quota
UEs reserved for
UEs initiating
BTS3900:
emergency calls
V100R009C00
and high-priority
BTS3900 LTE: Radio L
UEs and more
V100R009C00
common UEs can
access the cell. A
larger value of this
parameter leads to
the opposite
effects.
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

A larger value of
this parameter
results in a longer
time that a cell
stays in the RF
channel intelligent
shutdown mode
and a larger impact
on average cell
throughput in the
downlink. A smaller
value of this
BTS3900:
parameter results in
V100R010C10
the opposite
BTS3900 LTE: Radio L
effects. If this
V100R010C10
parameter is set to
0, a cell enters the
RF channel
intelligent shutdown
mode when no UE
in
RRC_CONNECTE
D mode exists in
the cell, which is
the same as the
mechanism in
versions before
V100R008C10.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

A smaller value of
this parameter
results that the EPC
performs
differentiated
control on UEs and
services in a more
timely manner,
which ensures
experience of high-
priority UEs and
services. However,
the air interface
resource utilization
rate decreases
when the number of BTS3900:
UEs or traffic V100R010C10
volume is BTS3900 LTE: Radio L
insufficient. A larger V100R010C10
value of this
parameter results
that the EPC
performs
differentiated
control on UEs and
services in a less
timely manner and
UEs have a higher
resource utilization
rate. However,
timely differentiated
service assurance
for high-priority UEs
and services cannot
be ensured.
A smaller value of
this parameter
results that the EPC
performs
differentiated
control on UEs and
services in a more
timely manner,
which ensures
experience of high-
priority UEs and
services. However,
the air interface
resource utilization
rate decreases
when the number of BTS3900:
UEs or traffic V100R010C10
volume is BTS3900 LTE: Radio L
insufficient. A larger V100R010C10
value of this
parameter results
that the EPC
performs
differentiated
control on UEs and
services in a less
timely manner and
UEs have a higher
resource utilization
rate. However,
timely differentiated
service assurance
for high-priority UEs
and services cannot
be ensured.
A smaller value of
this parameter
results that the EPC
performs
differentiated
control on UEs and
services in a more
timely manner,
which ensures
experience of high-
priority UEs and
services. However,
the air interface
resource utilization
rate decreases
when the number of BTS3900:
UEs or traffic V100R010C10
volume is BTS3900 LTE: Radio L
insufficient. A larger V100R010C10
value of this
parameter results
that the EPC
performs
differentiated
control on UEs and
services in a less
timely manner and
UEs have a higher
resource utilization
rate. However,
timely differentiated
service assurance
for high-priority UEs
and services cannot
be ensured.
A smaller value of
this parameter
results that the EPC
performs
differentiated
control on UEs and
services in a more
timely manner,
which ensures
experience of high-
priority UEs and
services. However,
the air interface
resource utilization
rate decreases
when the number of BTS3900:
UEs or traffic V100R010C10
volume is BTS3900 LTE: Radio L
insufficient. A larger V100R010C10
value of this
parameter results
that the EPC
performs
differentiated
control on UEs and
services in a less
timely manner and
UEs have a higher
resource utilization
rate. However,
timely differentiated
service assurance
for high-priority UEs
and services cannot
be ensured.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

If single radio LTE-

capable UEs
access a cell,
setting this
parameter to ON
increases cell
throughput, and
setting this BTS3900:
parameter to OFF V100R010C00
has no impact on BTS3900 LTE: Radio L
network V100R010C00
performance. If no
single radio LTE-
capable UEs
access a cell, the
parameter setting
has no impact on
network
performance.
If the SrlteSwitch
parameter is set to
ON, changing the
SrlteDtxThrd
parameter value
impacts cell
throughput.
A smaller value of
the SrlteDtxThrd
parameter results in
a shorter time to
detect the
consecutive DTX BTS3900:
times exceeding V100R010C00
this threshold and a BTS3900 LTE: Radio L
higher positive gain V100R010C00
in cell throughput.
However, a too
small value of this
parameter may
generate negative
gains in cell
throughput due to
incorrect DTX
detection. A larger
value of this
parameter results in
the opposite
effects.

If the SrlteSwitch
parameter is set to
ON, changing the
SrlteSuspendTime
parameter value
impacts cell
throughput.
A smaller value of
the
SrlteSuspendTime
parameter results in
a short time that the BTS3900:
eNodeB stops V100R010C00
scheduling a single BTS3900 LTE: Radio L
radio LTE-capable V100R010C00
UE and a lower
gain of cell
throughput. A larger
value of this
parameter results in
the opposite
effects. A too large
value of this
parameter
decreases
throughput of the
UE.
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
leads to a lower
probability of
reporting a UL ICIC
measurement
event, hence a
smaller number of
UEs that report the
related
measurements and
fewer signaling
messages over the
Uu interface. As a
result, service
quality for cell edge
users (CEUs)
cannot be ensured,
and the CEU BTS3900:
throughput and cell V100R008C00
capacity decreases. BTS3900 LTE: Radio L
A smaller value of V100R003C00
this parameter
leads to a higher
probability of
reporting a UL ICIC
measurement
event, hence a
larger number of
UEs that report the
related
measurements and
more signaling
messages over the
Uu interface. As a
result, more UEs
occupy edge
frequency bands,
and the general
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
ensured. The
maximum system
capacity can be
verified when this
parameter is set to
ULSCH_STRATEG
Y_MAX_CI. When
this parameter is
set to
ULSCH_STRATEG
Y_RR, scheduling
fairness among
UEs is achieved,
but the minimum
system capacity is
available, and QoS
cannot be ensured
BTS3900:
for UEs. The
V100R008C00
scheduling fairness
BTS3900 LTE: Radio L
among UEs can be
V100R002C00
verified when this
parameter is set to
ULSCH_STRATEG
Y_RR. When this
parameter is set to
ULSCH_STRATEG
Y_PF, channel
quality of UEs and
scheduling fairness
among UEs are
ensured, but QoS
cannot be ensured
for UEs. When this
parameter is set to
ULSCH_STRATEG
Y_EPF, the channel
quality, scheduling
fairness, and QoS
ADAPTIVE_HARQ_
SW_ON, waste of
resources due to
resource conflicts
can be avoided,
thereby increasing
the cell throughput
in the uplink, but
more PDCCH
resources are
consumed.
When this
parameter is set to
ADAPTIVE_HARQ_
SW_OFF, waste of
resources due to
resource conflicts
BTS3900:
may occur, thereby
V100R008C00
decreasing the cell
BTS3900 LTE: Radio L
throughput in the
V100R002C00
uplink, but less
PDCCH resources
are consumed.
When this
parameter is set to
ADAPTIVE_HARQ_
SW_SEMI_ON,
HARQ is used
when a HARQ fails
due to resource
allocation conflicts,
measurement GAP
conflicts, or PDCCH
congestion, thereby
improving the
utilization of uplink
resources and
reducing the
This parameter
controls uplink cell
throughput. The cell
edge throughput in
different networking
scenarios
corresponds to
different uplink
target IBLER
values. In static
channels, the target
IBLER value
corresponding to
uplink cell edge BTS3900:
throughput is close V100R008C00
to 10%. In fading BTS3900 LTE: Radio L
channels, the target V100R002C00
IBLER value
corresponding to
uplink cell edge
throughput is more
than 10%. The
uplink transmission
efficiency may
decrease either
because the value
of this parameter is
too large or
because the value
of this parameter is
too small.

A larger value of
this parameter
leads to
consumption of
more resources in
preallocation, a
shorter delay in UL BTS3900:
data transmission, V100R008C00
but stronger UL BTS3900 LTE: Radio L
interference and V100R002C00
more power
consumption for
UEs. A smaller
value of this
parameter leads to
the opposite
effects.
A larger value of
this parameter
leads to a larger
scheduling interval
in preallocation,
longer delay in UL
BTS3900:
data transmission,
V100R008C00
but weaker UL
BTS3900 LTE: Radio L
interference and
V100R002C00
less power
consumption for
UEs. A smaller
value of this
parameter leads to
the opposite
effects.

A larger value of
this parameter
leads to a shorter
delay in UL data
BTS3900:
transmission, but
V100R008C00
stronger UL
BTS3900 LTE: Radio L
interference and
V100R002C00
more power
consumption for
UEs. A smaller
value leads to the
opposite effects.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
A smaller value of
this parameter
leads to a smaller
number of
preliminarily
scheduled SRs, but
a longer delay in UL
data transmission. A
larger value of this
parameter leads to
a larger number of
preliminarily
scheduled SRs, but
more resources are BTS3900:
wasted in UL data V100R008C00
transmission. BTS3900 LTE: Radio L
Because the V100R004C00
number of
scheduled SRs in
subsequent stages
can be dynamically
adjusted with the
scenario, the
parameter settings
affect only SR
transmission
performance, and
UL data
transmission in
subsequent stages
are not affected.

If this parameter
value is too large,
BTS3900:
network resources
V100R008C00
may be wasted due
BTS3900 LTE: Radio L
to delay in implicit
V100R004C00
release of semi-
persistent
resources.
A larger value of
this parameter
leads to a shorter
delay in UL data
transmission, but
stronger UL
interference and
more power
consumption for
BTS3900:
UEs. A smaller
V100R008C00
value leads to the
BTS3900 LTE: Radio L
opposite effects. If
V100R008C00
this parameter is
set to 0, uplink
preallocation does
not take effect. If
this parameter
value is greater
than the interval of
the ping service,
the delay of ping
services decreases.

The value 1
ensures optimal
fairness of resource
allocation to UEs
while maximizing
the cell capacity. If
this parameter is
set to a value
greater than 1, a
larger factor results
in more RBs being
allocated to cell
center users(CCUs)
and fewer RBs to
cell edge
users(CEUs). This BTS3900:
increases cell V100R008C00
throughput but BTS3900 LTE: Radio L
damages fairness V100R008C00
among UEs in the
cell. If this
parameter is set to
a value less than 1,
a smaller factor
results in more RBs
being allocated to
CEUs and fewer
RBs to CCUs,
which results in
similar throughput
for CCUs and
CEUs. However,
fairness among
UEs in the cell is
damaged.
If this parameter is
set to
FS_INRANDOM_A
DAPTIVE, inter-cell
interference
decreases. Both
throughput of cell
edge users (CEUs)
and the total cell
throughput increase
when the cell is BTS3900:
lightly loaded, and V100R008C00
throughput of CEUs BTS3900 LTE: Radio L
increases but the V100R008C00
total cell throughput
may decrease
when the cell is
heavily loaded.
Setting this
parameter to the
default value
FS_NONFS_ADAP
TIVE has no impact
on network
performance.

The Doppler
measurement
results are used in
the implementation
of features
Downlink
Frequency-selective
Scheduling and
High-Mobility-
Triggered Idle
BTS3900:
Mode. Compared
V100R008C01
with the scenario
BTS3900 LTE: Radio L
where the
V100R008C01
parameter is set to
CLASS_0, features
Downlink
Frequency-selective
Scheduling and
High-Mobility-
Triggered Idle Mode
achieve more gains
when this
parameter is set to
CLASS_1.
A smaller value of
this parameter
leads to fewer radio
resource overheads
BTS3900:
caused by HARQ
V100R008C01
retransmissions but
BTS3900 LTE: Radio L
lower radio link
V100R008C01
reliability. A larger
value of this
parameter leads to
the opposite
effects.

If this parameter
value is the same
as the
SmartPreAllocation
Duration parameter
value, the network
performance is not
affected. If this
parameter value is
greater than the
interval of ping
services and the
SmartPreAllocation
BTS3900:
Duration parameter
V100R009C00
value is less than
BTS3900 LTE: Radio L
the interval of ping
V100R009C00
services, the delay
of ping services can
accurately reflect
the delay of
commercial
services. It is
recommended that
this parameter be
set to a value
greater than or
equal to the
SmartPreAllocation
Duration parameter
value.
If this parameter is
set to ms20, voice
services have the
shortest scheduling
delay. If this
parameter is set to
ms40 or
ADAPTIVE, the
number of UEs
supporting semi-
persistent
scheduling
increases while the
scheduling delay for
BTS3900:
voice services also
V100R009C00
increases, which
BTS3900 LTE: Radio L
probably decreases
V100R009C00
the MOS value of
voice services. If
this parameter is
set to ADAPTIVE,
the cell selects
semi-persistent
scheduling periods
for UEs with newly
established voice
bearers based on
the load to improve
the capacity and
user experience of
UEs running voice
services.
If this parameter is
set to ON, the SRI
false detection
probability
decreases to 0.5%
for UEs in the DRX
state and the
number of uplink
retransmissions
caused by SRI false
detections
decreases; the SRI BTS3900:
false detection V100R009C00
probability retains BTS3900 LTE: Radio L
the default value V100R009C00
1% for UEs not in
the DRX state. If
this parameter is
set to OFF, the SRI
false detection
probability retains
the default value
1% for UEs,
regardless of
whether the UEs
are in the DRX
state or not.

Setting this
parameter to 0 has
no impact on
network
performance.
Setting this
parameter to a
value within the
range from 1 to 4
decreases the
service drop rate of BTS3900:
Qualcomm UEs, but V100R009C00
also decreases BTS3900 LTE: Radio L
uplink throughput V100R009C00
and prolongs uplink
scheduling delay of
non-Qualcomm
UEs. A larger non-
zero value of this
parameter within
the range from 1 to
4 leads to a longer
uplink scheduling
delay and a smaller
uplink throughput.
If a cell is heavily
loaded with VoIP
services, setting
this parameters to
VOIP_DELAYSCH
increases the MOS
and system
capacity for VoIP
services, but
BTS3900:
prolongs the delay
V100R009C00
of SR scheduling,
BTS3900 LTE: Radio L
ping services, and
V100R009C00
the duration for a
UE changing from
the idle mode to
active mode.
Setting this
parameter to
NO_DELAYSCH
has no impact on
network
performance.

the
DlSchAbnUeThd
parameter setting
has no impact on
network
performance.
If AbnUeSchSwitch
of the
CellSchStrategySwi
tch parameter is on,
the
DlSchAbnUeThd
parameter setting
helps decrease the
residual block error
rate (RBLER) and
increase cell
BTS3900:
throughput in
V100R009C00
scenarios where
BTS3900 LTE: Radio L
resources are
V100R009C00
insufficient. A larger
value of the
UlSchAbnUeThd
parameter results in
a smaller decrease
in the RBLER and a
smaller increase in
cell throughput in
scenarios where
resources are
insufficient. A
smaller value of the
UlSchAbnUeThd
parameter results in
a larger decrease in
the RBLER and a
larger increase in
cell throughput in
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

If this parameter is
set to ON and
uplink semi-
persistent
scheduling is
BTS3900:
enabled for UEs
V100R010C00
complying with
BTS3900 LTE: Radio L
3GPP Release 9 or
V100R010C00
later, data on the
bearer with QCI 1
does not trigger SR,
thereby reducing
power consumption
of UEs.

If this parameter is
set to NEW_TX,
fewer uplink
resource blocks
(RBs) are wasted
caused by UL Grant
missing detection,
but uplink packet
loss may occur
when the initial
PUSCH
transmission is BTS3900:
falsely detected as V100R009C00
DTX. BTS3900 LTE: Radio L
If this parameter is V100R009C00
set to
ADAPTIVE_RETX,
the probability of
possible uplink
packet loss caused
by false detection of
the initial PUSCH
transmission as
DTX decreases, but
more uplink RBs
and CCEs are
consumed.
uplink dynamic
scheduling mode in
non-TTI bundling
mode, poorer uplink
coverage for voice
services, and fewer
control channel
elements (CCEs)
consumed in uplink
dynamic scheduling
of VoIP services.
A larger non-zero
value of this
parameter results in
the opposite
effects. The
recommended BTS3900:
value in an RAT is V100R009C00
the maximum value BTS3900 LTE: Radio L
in the RAT. V100R009C00
If this parameter is
set to 0 or a value
greater than the
recommended
value in the related
RAT, the number of
SDU segments at
the RLC layer for
VoIP services
during uplink
dynamic scheduling
in non-TTI bundling
mode may exceed
the recommended
value in the RAT in
weak coverage
areas. As a result,
service delay
decreases and the
voice service
experience is
improved for users
at medium
distances from or
far away from the
cell center.
UlVoIPLoadBasedS
chSwitch: If this
option is selected,
the capacity for
UEs running voice
services increases
compared with that
when the option is BTS3900:
deselected and V100R010C10
dynamic scheduling BTS3900 LTE: Radio L
is adopted, and the V100R010C10
transmission
efficiency is
improved compared
with that when the
option is selected
and semi-persistent
scheduling is
adopted.
UlVoipSchOptSwitc
h: If this option is
selected, an uplink
dynamic scheduling
is triggered for
voice UEs adopting
uplink dynamic
scheduling if the
scheduling interval
Consider that
UlInterfFssSwitch of
the UlSchSwitch
parameter is on. A
larger value of the
UlEnhencedVoipSc
hSw parameter
results in a increase
in uplink cell
throughput and a
decrease in uplink
throughput of cell
BTS3900:
edge users. A
V100R010C00
smaller value of the
BTS3900 LTE: Radio L
UlEnhencedVoipSc
V100R010C00
hSw parameter
results in the
opposite effects.
If UlInterfFssSwitch
of the UlSchSwitch
parameter is off, the
UlEnhencedVoipSc
hSw parameter
does not take effect
and its setting has
no impact on
network
performance.

A smaller value of
this parameter
results in a higher
probability that a
cell is added to the
interference
measurement set,
more accurate MCS BTS3900:
selection in the V100R010C10
uplink coordinated BTS3900 LTE: Radio L
AMC algorithm, V100R010C10
higher uplink
throughput, but
more signaling
overheads over the
air interface and a
more complex
processing
mechanism.
signal fluctuation
and also decrease
unnecessary RRC
connection
reconfigurations. A
smaller value of this
parameter results in
a shorter time to
delay TTI bundling
entering, a higher
probability of
entering TTI
bundling, a higher
probability of
unnecessary TTI
bundling entering,
and more RB BTS3900:
resources to be V100R010C10
consumed if a UE BTS3900 LTE: Radio L
enters TTI bundling V100R010C10
when the channel
quality is good. As a
result, throughput
deceases. A larger
value of this
parameter results in
a longer time to
delay the TTI
bundling entering, a
lower probability of
entering TTI
bundling, and a
higher probability
that voice service
quality deteriorates,
and more CCEs to
be consumed and
from TTI bundling
caused by wireless
signal fluctuation
and also decrease
unnecessary RRC
connection
reconfigurations. A
smaller value of this
parameter results in
a shorter time to
delay the exit from
TTI bundling, a
higher probability of
exiting from TTI
bundling, a higher
probability of
unnecessary exit BTS3900:
from TTI bundling, V100R010C10
more RRC BTS3900 LTE: Radio L
connection V100R010C10
reconfigurations,
and lower MOS
scores. A larger
value of this
parameter results in
a longer time to
delay the exit from
TTI bundling, a
lower probability of
exiting from TTI
bundling, and a
higher probability
that UEs retain in
TTI bundling mode
even when the
channel quality is
good, which
decreases the
probability of
unnecessary exit
from TTI bundling
caused by wireless
signal fluctuation
and also decreases
unnecessary RRC
connection
reconfigurations.
A smaller value of
this parameter
results in a higher
probability of exiting
from TTI bundling, a
higher probability of
unnecessary exit
BTS3900:
from TTI bundling,
V100R010C10
more RRC
BTS3900 LTE: Radio L
connection
V100R010C10
reconfigurations,
and lower MOS
scores.
A larger value of
this parameter
results in a lower
probability of exiting
from TTI bundling
and a higher
probability that UEs
retain in TTI
bundling mode
even when the
channel quality is
good, which
consumes more RB
resources and
decreases
results in fewer
SDU segments that
can be divided for
services in uplink
dynamic scheduling
in TTI bundling
mode, poorer uplink
coverage for VoIP
services, and fewer
control channel
elements (CCEs)
consumed in uplink
dynamic scheduling
of VoIP services. A
larger non-zero
value of this
parameter results in
BTS3900:
the opposite
V100R010C10
effects. The
BTS3900 LTE: Radio L
recommended
V100R010C10
value in an RAT is
the maximum value
in the RAT. If this
parameter is set to
0 or a value greater
than the
recommended
value in the related
RAT, the number of
SDU segments at
the RLC layer for
services during
uplink dynamic
scheduling in TTI
bundling mode may
exceed the
recommended
value in the RAT. As

A smaller value of
this parameter
results in fewer
radio resource
overheads caused BTS3900:
by HARQ V100R010C10
retransmissions but BTS3900 LTE: Radio L
lower radio link V100R010C10
reliability. A larger
value of this
parameter results in
the opposite
effects.
of the UlSchSwitch
parameter is
selected and the
TtiBundlingTriggerS
trategy parameter is
set to
SERVICE_VOIP,
TTI bundling
applies to UEs that
are run only VoIP
services and do not
have data services
in the uplink.
Setting the
TtiBundlingTriggerS
trategy parameter is
set to BTS3900:
SERVICE_VOIP V100R010C10
has no impact on BTS3900 LTE: Radio L
network V100R010C10
performance.
If the
TtiBundlingTriggerS
trategy parameter is
set to
SERVICE_MULTIA
PP, TTI bundling
applies to all UEs
running VoIP
services, including
UEs running VoIP
services only and
UEs running mixed
services. This
ensures the quality
of VoIP services for
UEs with mixed
BTS3900:
V100R010C10
No impact BTS3900 LTE: Radio L
V100R010C10
If this parameter is
set to ON and the
UlVmimoSwitch
check box under
the UlSchSwitch
parameter is
selected, enhanced
VMIMO is enabled,
and the
transmission rate of
paired UEs and
average uplink
throughput of cells
are improved. If this
parameter is set to
ON but the
UlVmimoSwitch
BTS3900:
check box under
V100R008C01
the UlSchSwitch
BTS3900 LTE: Radio L
parameter is
V100R008C01
deselected, VMIMO
is disabled.
If this parameter is
set to OFF and the
UlVmimoSwitch
check box under
the UlSchSwitch
parameter is
selected, normal
VMIMO is enabled.
If this parameter is
set to OFF and the
UlVmimoSwitch
check box under
the UlSchSwitch
parameter is
deselected, VMIMO
is disabled.
If the number of
synchronized UEs
in a cell is less than
this parameter
value, the network
performance is not
affected.
If the number of
synchronized UEs BTS3900:
in a cell is greater V100R010C10
than or equal to this BTS3900 LTE: Radio L
parameter value, V100R010C10
PDCCH and
PUSCH resources
are balanced in
uplink scheduling,
increasing PRB
usage and uplink
throughput in large
traffic volume
scenarios.
UEs can be
determined as a UE
with large-packet
transmission, and
the network
performance and
KPI are not
affected.
If this parameter is
set to a non-zero
value, a UE whose
traffic to be
scheduled is
greater than or
equal to this
parameter value is
determined as a UE
BTS3900:
with large-packet
V100R010C10
transmission.
BTS3900 LTE: Radio L
Setting this
V100R010C10
parameter to a non-
zero value
increases the
physical resource
block (PRB) usage
and uplink
throughput in large
traffic volume
scenarios. A smaller
non-zero value of
this parameter
results in a higher
probability of a UE
being determined
as a UE with large-
packet
transmission. A
larger non-zero
Setting this
parameter to 0bit
has no impact on
network
performance.
Setting this
BTS3900:
parameter to any
V100R010C10
other value
BTS3900 LTE: Radio L
increases the MOS
V100R010C10
score for voice
users, decreases
the transmission
delay for voice
users, and
increases the uplink
RB usage.

A larger value of
this parameter
results in a longer
interval between
two preallocations
for UEs with sparse
packets, a longer
BTS3900:
transmission delay
V100R010C10
for services with
BTS3900 LTE: Radio L
sparse packets,
V100R010C10
less UE power
consumption, and
weaker uplink
interference. A
smaller value of this
parameter results in
the opposite
effects.
A larger value of
this parameter
results in a shorter
transmission delay
for services with
BTS3900:
sparse packets but
V100R010C10
more UE power
BTS3900 LTE: Radio L
consumption and
V100R010C10
stronger uplink
interference. A
smaller value of this
parameter results in
the opposite
effects.

If this parameter is
set to
THREE_MODE_BA
SED_ON_PCI,
three uplink
interference
randomization
modes are
supported, and
inter-cell
BTS3900:
interference
V100R010C10
decreases. Uplink
BTS3900 LTE: Radio L
throughput
V100R010C10
increases when the
number of UEs in
the cell is large and
uplink RB usage is
low. Setting this
parameter to
TWO_MODE_BAS
ED_ON_PCI has
no impact on
network
performance.
near the cell center,
the packet loss rate
of voice services
with QCI1 slightly
decreases while the
voice service quality
remains almost
unchanged. For
UEs of medium
distance from or far
away from the cell
center, the number
of RLC segments of
uplink voice
services increases,
and therefore the
uplink packet loss
BTS3900:
rate of voice
V100R010C10
services with QCI1
BTS3900 LTE: Radio L
may increase,
V100R010C10
which means that
the voice service
quality may
deteriorate.
If this parameter is
set to a large value,
voice UEs select a
large MCS in the
uplink. For UEs
near and of medium
distance from the
cell center, the
uplink packet loss
rate of voice
services with QCI1
may increase,
which means that
the voice service
If this parameter is
set to a small value,
the attributes of
some UEs
frequently change
due to frequent
change of the
isolation thresholds.
This causes great BTS3900:
UE throughput V100R010C10
fluctuation. BTS3900 LTE: Radio L
If this parameter is V100R010C10
set to a large value,
the attributes of
UEs cannot be
adaptively adjusted
based on the
current cell load.
This decreases the
cell throughput and
user-perceived rate.
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A larger value of
this parameter
results in a lower
probability that
UMTS and LTE
unified overload
control is triggered
when the cell is
overloaded. As a
result, the RRC
connection setup
success rate
decreases and the
LTE-to-UMTS
handover success
BTS3900:
rate decreases. A
V100R010C10
smaller value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C10
a higher probability
that UMTS and LTE
unified overload
control is triggered,
which causes an
increase in the RRC
connection setup
success rate and
the LTE-to-UMTS
handover success
rate, but may also
cause a decrease
in the number of
LTE-to-UMTS
handovers and cell
reselections.
A larger value of
this parameter
results in a higher
probability that
UMTS and LTE
unified overload
control is not
triggered when the
cell is overloaded.
As a result, the
RRC connection
setup success rate
decreases and the
LTE-to-UMTS
handover success
BTS3900:
rate decreases. A
V100R010C10
smaller value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C10
a higher probability
that UMTS and LTE
unified overload
control is triggered,
which causes an
increase in the RRC
connection setup
success rate and
the LTE-to-UMTS
handover success
rate, but may also
cause a decrease
in the number of
LTE-to-UMTS
handovers and cell
reselections.
A larger value of
this parameter
results in a higher
probability that
UMTS and LTE
unified overload
control is not
triggered when the
cell is overloaded.
As a result, the
RRC connection
setup success rate
decreases and the
LTE-to-UMTS
handover success
BTS3900:
rate decreases. A
V100R010C10
smaller value of this
BTS3900 LTE: Radio L
parameter results in
V100R010C10
a higher probability
that UMTS and LTE
unified overload
control is triggered.
This causes an
increase in the RRC
connection setup
success rate and
the LTE-to-UMTS
handover success
rate, but may also
cause a decrease
in the number of
LTE-to-UMTS
handovers and cell
reselections.
A smaller value of
this parameter
results in a lower
probability of
stopping UMTS and
LTE unified
overload control.
Therefore, the RRC
connection setup
success rate
increases and the
LTE-to-UMTS
handover success
rate increases, and
the number of LTE-
BTS3900:
to-UMTS handovers
V100R010C10
and cell
BTS3900 LTE: Radio L
reselections may
V100R010C10
decrease. A larger
value of this
parameter results in
a higher probability
of stopping UMTS
and LTE unified
overload control
even when the cell
is overloaded. This
causes a decrease
in the RRC
connection setup
success rate and
the LTE-to-UMTS
handover success
rate.
A larger value of
this parameter
results in a higher
probability that
UMTS and LTE
unified overload
control is not
triggered when the
cell is overloaded.
As a result, the
RRC connection
setup success rate
decreases and the
LTE-to-UMTS
handover success
rate decreases. A BTS3900:
smaller value of this V100R010C10
parameter results in BTS3900 LTE: Radio L
a higher probability V100R010C10
that UMTS and LTE
unified overload
control is triggered.
Therefore, the RRC
connection setup
success rate
increases and the
LTE-to-UMTS
handover success
rate increases. In
addition, the
number of LTE-to-
UMTS handovers
and cell
reselections may
decrease.
A smaller value of
this parameter
results in a lower
probability of
stopping UMTS and
LTE unified
overload control.
Therefore, the RRC
connection setup
success rate
increases and the
LTE-to-UMTS
handover success
rate increases, and
the number of LTE-
BTS3900:
to-UMTS handovers
V100R010C10
and cell
BTS3900 LTE: Radio L
reselections may
V100R010C10
decrease. A larger
value of this
parameter results in
a higher probability
of stopping UMTS
and LTE unified
overload control
even when the cell
is overloaded. This
causes a decrease
in the RRC
connection setup
success rate and
the LTE-to-UMTS
handover success
rate.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00
 BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R005C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
 BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
channel calibration
is disabled,
throughput of
downlink 4x2 or 4x4
MIMO in closed-
loop mode is
unstable, and
therefore do not set
this parameter to
OFF in live
networks. If this
parameter is set to
ON, TX channel
calibration is
enabled
immediately after a
cell with combined
BTS3900:
RRUs and four TX
V100R009C00
antennas is set up,
BTS3900 LTE: Radio L
and periodic TX
V100R009C00
channel calibration
is performed
subsequently.
Throughput of
downlink 4x2 or 4x4
MIMO in closed-
loop mode can
increase by 0% to
30%, or even
higher. Because
only two RX
antennas are
available during TX
channel calibration
(less than 1s),
uplink throughput of
cell edge users
(CEUs) decreases
Because only two
RX antennas are
available during TX
channel calibration
(less than 1s),
uplink throughput of
cell edge users
(CEUs) decreases
BTS3900:
during TX channel
V100R009C00
calibration. Setting
BTS3900 LTE: Radio L
this parameter to a
V100R009C00
busy time has a
greater impact on
uplink throughput of
CEUs, and setting
this parameter to an
idle time has a
smaller impact on
uplink throughput of
CEUs.
Throughput of
downlink 4x2 or 4x4
MIMO in closed-
loop mode
increases after TX
channel calibration,
but uplink
throughput of cell
edge users (CEUs)
decreases during
TX channel
calibration because
only two RX
channels can be
used during TX
channel calibration.
The TX channel BTS3900:
calibration duration V100R009C00
is less than 1s. A BTS3900 LTE: Radio L
smaller value of this V100R009C00
parameter leads to
more frequent
periodic TX channel
calibration, higher
throughput of
downlink 4x2 or 4x4
MIMO in closed-
loop mode after TX
channel calibration,
but lower uplink
throughput of CEUs
during TX channel
calibration. A larger
value of this
parameter leads to
the opposite
effects.

An appropriate
setting of this
parameter
increases the TX
channel calibration
accuracy and
throughput of
downlink 4x2 or 4x4
MIMO in closed-
BTS3900:
loop mode. If this
V100R009C00
parameter is set to
BTS3900 LTE: Radio L
a value with the
V100R009C00
distance error
greater than 1 m,
the TX channel
calibration accuracy
decreases, and
throughput of
downlink 4x2 or 4x4
MIMO in closed-
loop mode
decreases.
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
 BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10
BTS3900:
V100R010C10
None BTS3900 LTE: Radio L
V100R010C10

A larger value of
this parameter
leads to less
frequent detection
of the UpPTS
interference and BTS3900:
smaller signaling V100R010C10
overheads. A BTS3900 LTE: Radio L
smaller value of this V100R010C10
parameter leads to
more frequent
detection of the
UpPTS interference
and larger signaling
overheads.

A large value of this

parameter
decreases the
possibility of SRS-
transmission-
forbidden in UpPTS
due to severe
BTS3900:
UpPTS
V100R010C10
interference. A
BTS3900 LTE: Radio L
small value of this
V100R010C10
parameter
increases the
possibility of SRS-
transmission-
forbidden in UpPTS
due to severe
UpPTS
interference.
A large value of this
parameter
effectively reduces
the ping-pong
switchings between
the state of SRS-
transmission- BTS3900:
forbidden in UpPTS V100R010C10
and that of SRS- BTS3900 LTE: Radio L
transmission- V100R010C10
allowed in UpPTS
due to interference
fluctuation. A small
value of this
parameter
increases the ping-
pong switchings.

BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
 BTS3900:
V100R010C00
None BTS3900 LTE: Radio L
V100R010C00
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C00
the switch is on, the
eNodeB enables
reuse of dedicated
preambles among
UEs at different
times. The reuse
increases the
dedicated preamble
utilization efficiency
but also increases
the random access
delay. Setting the
switch to off leads
to the opposite
effects.
BackOffSwitch: If
the switch is on, BTS3900:
UEs that V100R008C00
experience BTS3900 LTE: Radio L
contention V100R001C00
resolution failures
retransmit
preambles after a
period of time. This
relieves RACH
congestion but
increases the
random access
delay. Setting the
switch to off leads
to the opposite
effects.
PRACHFalseAlarm
DetSwitch: Setting
the switch to off has
no impact on
network
If
SrsSubframeRecfS
witch is off, no SRS
subframes can be
configured for UEs
initially accessing
the network, which
results in
specification test
failures. It is
recommended that
SrsSubframeRecfS
witch be on and
never turned off. In BTS3900:
this case, the cell V100R008C00
throughput is high BTS3900 LTE: Radio L
when the cell load V100R001C00
is low. When the
cell load is high, the
eNodeB
automatically
adjusts cell-specific
SRS subframes to
allow the cell to
serve the maximum
number of UEs.
However, the cell
throughput
decreases because
of the SRS
subframe overhead.
the PUCCH
resources
decrease, however,
CQI resources may
need to be
reconfigured for a
few UEs. The
reconfiguration
consumes certain
downlink resources.
If this switch is off,
uplink control
signaling overhead
increases.
PucchFlexCfgSwitc
h: If this switch is
On, interference to
BTS3900:
the PUCCH can be
V100R008C00
reduced, which
BTS3900 LTE: Radio L
improves the
V100R001C00
PUCCH
demodulation
performance and
also increases the
system access
performance and
downlink
throughput.
However, the
PUSCH resources
become
nonconsecutive,
which decreases
the uplink
throughput.
Therefore, uplink
peak rate tests are
not supported in
When this switch is
turned on, the delay
of interactive
services decreases
and the time BTS3900:
required for V100R008C00
downloading large- BTS3900 LTE: Radio L
sized files increases V100R001C00
slightly. When this
switch is turned off,
there is no impact
on radio network
performance.
switch is off, UEs
using the ACK
multiplexing mode
enable the non-
optimized CQI
mechanism, which
may result in an
incorrect MCS
value for special
subframes and
decrease downlink
throughput of each
UE and cell
average downlink
throughput.
AdaptiveStepVaryS
witch: If this switch
BTS3900:
is on, the CQI
V100R008C00
adjustment is
BTS3900 LTE: Radio L
performed at a
V100R001C00
large step in case
of significant signal
quality changes,
accelerating the
IBLER convergence
and therefore
increasing the
downlink
throughput. If this
switch is off, the
CQI adjustment is
performed at a fixed
step, which has no
impact on network
performance.
DlCqiAdjDeltaOptS
witch: If this switch
is on, the IBLER
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R001C01
DlLdcSwitch:
If this switch is on,
low-priority GBR
services will be
released when
downlink
congestion occurs
on the air interface.
This improves the
downlink
satisfaction rate of
high-priority GBR
services but
increases the call
drop rate of low-
priority GBR
services.
BTS3900:
If this switch is off,
V100R008C00
low-priority GBR
BTS3900 LTE: Radio L
services will not be
V100R001C01
released when
downlink
congestion occurs
on the air interface.
This does not
increase the call
drop rate of low-
priority GBR
services. However,
the downlink
satisfaction rate of
high-priority GBR
services does not
improve, either.
UlLdcSwitch:
If this switch is on,
low-priority GBR
services will be
the cell is heavy
and there is an
imbalance in the
load between cells,
the probability of
overload in the
system is low, and
the access
success rate and
the total throughput
are high. If these
switches are all off,
inter-RAT load
sharing is disabled.
Then, the inter-RAT
load imbalances
cannot be handled. BTS3900:
In this case, the V100R008C00
probability of BTS3900 LTE: Radio L
overload is high, V100R002C00
and the access
success
rate and the total
throughput are low.
If the
InterFreqBlindMlbS
witch check box is
selected, inter-
frequency blind
MLB is enabled.
With this function,
when the load in
the serving cell is
heavy and there is
an imbalance in the
load between cells,
the probability
transmit power may
be saved but uplink
rates may decrease
in some scenarios.
If PdcchPcSwitch is
on, the service drop
rate of cell edge
users (CEUs)
decreases and the
CEU throughput
increases.
If
EDlMaxTXPwrSwitc
h is on, the
maximum cell
transmit power
increases, which BTS3900:
increases the cell V100R008C00
RB usage and BTS3900 LTE: Radio L
downlink V100R002C00
throughput.
If
SigPowerIncreaseS
witch is on, the
PDSCH transmit
power increases
when scheduling is
performed for
downlink
retransmission of
signaling during
network entry, and
the signaling
demodulation
performance is
improved. However,
the scheduling of
NearPointUeOptPU
SCHSwitch: If this
switch is off, UEs
near the cell center
unnecessarily lower
PUSCH transmit
power in inter-RAT
or abrupt
interference
scenarios,
decreasing uplink
throughput.
If this switch is on,
UEs near the cell
center increase the
PUSCH transmit
power in inter-RAT BTS3900:
or abrupt V100R008C00
interference BTS3900 LTE: Radio L
scenarios, V100R002C00
increasing uplink
throughput.
However, this also
increases uplink
interference on
neighboring cells.
PuschRsrpHighThd
Switch: If this switch
is off and the
transmit power for
the PUSCH is too
high, the uplink
received power at
repeaters (if any) is
saturated. As a
result, uplink
demodulation
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R002C00
addition, system
throughput may
also be affected by
the differences
between
MBRs/AMBRs of
UEs and the
distribution of UEs
in the cell. If this
switch is off, the
throughput
differences between
UEs with different
MBRs/AMBRs
decrease. In
addition, system
throughput is not BTS3900:
affected by the V100R008C00
differences between BTS3900 LTE: Radio L
MBRs/AMBRs of V100R003C00
UEs or the
distribution of UEs
in the cell.
EpfEnhancedSwitc
h: Setting this
switch to on
increases downlink
user throughput
and improves user
experience. Turning
off this switch has
no impact on
network
performance.
AperiodicCqiTrigOp
tSwitch: Setting this
switch to on
rSwitch: If this
switch is on, uplink
frequency selective
scheduling
performance of low-
mobility UEs
increases. The cell
coverage and data
rate of CEUs
increase, and the
PRB usage
decreases.
UlRaUserSchOptS
w: Setting this
switch to on
increases the RRC
connection setup BTS3900:
success rate and V100R008C00
decreases the BTS3900 LTE: Radio L
average delay for V100R003C00
RRC connection
setup. However,
performance
counters related to
uplink throughput
may decrease
because uplink data
transmission is
interrupted in the
following scenarios:
(1) Many UEs
initiate random
access procedures;
(2) Congestion
occurs during
signaling
scheduling. Setting
BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R003C00
based inter-
frequency
handovers, for
example, set the
threshold related to
event A1 to a large
value.
MlbBasedFreqPriH
oSwitch: If this
option is on, load
balancing is
triggered, and the
target frequency for
frequency-priority-
based handovers is
the frequency used
to offload traffic of
BTS3900:
the source cell
V100R008C00
during load
BTS3900 LTE: Radio L
balancing, then the
V100R003C00
loads in the network
can be centrally
managed based on
the MLB algorithms
when the network is
heavily loaded,
thereby improving
resource utilization
rate. If this option is
deselected, the
target frequency
selected based on
target frequency
configuration in a
frequency-priority-
based inter-
frequency handover
is different from the
multi-user pairing is
not required.
It is recommended
that the
EnhMubfSwitch(En
hMubfSwitch) check
box be selected if
the
MuBfSwitch(MuBfS
witch) check box is
selected.
EnhMubfSwitch: If
this check box is
selected, enhanced
multi-user pairing is
enabled. UEs using
TM7 can be paired
BTS3900:
for multi-user
V100R008C00
beamforming and
BTS3900 LTE: Radio L
the pairing
V100R004C00
algorithm is
optimized. In this
case, the
throughput of multi-
user beamforming
increases. If this
check box is
deselected, the
common pairing
process is used,
and UEs using TM7
cannot be paired for
multi-user
beamforming.
TM9MuBfSwitch: If
this check box is
selected, TM9
multi-user pairing is
If this switch is
turned on, distance-
based handovers
are allowed and the
BTS3900:
handover success
V100R008C00
rate increases. If
BTS3900 LTE: Radio L
this switch is turned
V100R005C00
off, distance-based
handovers are
prohibited and the
handover success
rate decreases.
If this parameter is
set to
ACBAR_SWITCH_
DYNAMIC, the
access probability
factor for mobile-
originated calls and
BTS3900:
mobile-originated
V100R008C00
signaling are
BTS3900 LTE: Radio L
dynamically
V100R005C00
adjusted based on
the current cell
load. In this way,
the probabilities of
UEs accessing the
cell can be
controlled to relieve
the cell load.

If this switch is on,

the uplink coverage
improves in a cell
where interference BTS3900:
exists, and the V100R008C00
uplink throughput of BTS3900 LTE: Radio L
cell edge users V100R005C00
(CEUs) increases.
Setting this switch
to off receives the
opposite effects.

If the cell load is

high, adaptive
shceduling between BTS3900:
joint scheduling and V100R008C00
independent BTS3900 LTE: Radio L
scheduling is used V100R005C01
to improve the total
throughput of the
cell.

If the cell load is

high, adaptive
shceduling between BTS3900:
joint scheduling and V100R008C00
independent BTS3900 LTE: Radio L
scheduling is used V100R005C01
to improve the total
throughput of the
cell.
If the
PrachIrcSwitch
option of this
parameter is
selected, the
PRACH false alarm
probability
decreases, the
success rates of
access, handovers,
resynchronization, BTS3900:
and RRC V100R008C00
connection BTS3900 LTE: Radio L
reestablishments V100R008C00
through the RACH
increase. However,
the probability that
UEs in weak
coverage areas
attempt to access
the network
increases, thereby
decreasing the
RRC connection
setup success rate.

When this switch is

on, the dynamic
DRX feature
reduces the
signaling overhead BTS3900:
and decreases UE V100R008C00
power BTS3900 LTE: Radio L
consumption, V100R008C00
achieving a trade-
off between the
signaling overhead
and UE power
consumption.

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
after severe UpPTS
interference occurs,
and downlink
beamforming
becomes effective
for CEUs. After
SRSs are adjusted
to common uplink
subframes, the last
symbol in each
uplink subframe
cannot be used to
transmit the
PUSCH. Only 10
instead of 11
symbols are used
to transfer data in
BTS3900:
each uplink
V100R008C00
subframe after
BTS3900 LTE: Radio L
SRSs are adjusted
V100R008C00
to the uplink
subframe. If the
number of RBs
used by a UE and
the MCS index
remain unchanged,
the uplink
throughput of the
UE decreases by
9% under the worst
conditions.
3.When the
AvoidPrachInterfSw
itch check box is
deselected, the
PRACH
demodulation
quality is poor if

BTS3900:
V100R008C00
None BTS3900 LTE: Radio L
V100R008C00
absorbed by the
micro cell is small,
user experience in
the macro cell and
that in the micro cell
are different. If this
parameter is set to
STATIC or
DYNAMIC, TDM-
based eICIC is
enabled. In this
case, if a CRE is
not configured,
throughput in both
the macro cell and
micro cells
decreases. If a BTS3900:
proper CRE is V100R008C00
configured, the BTS3900 LTE: Radio L
number of UE V100R008C00
handovers from the
macro cell to the
micro cell
increases, the
number of UEs
absorbed by the
micro cell
increases, user
experience in the
macro cell and that
in the micro cell
becomes almost
the same, and
throughput of
network edge UEs
increases. In a
HetNet, dynamic
In scenarios with
only a few UEs, this
switch can be
turned on to
BTS3900:
improve the UL
V100R008C00
throughput.
BTS3900 LTE: Radio L
However, this
V100R008C00
affects the call
attempt per second
(CAPS)
specifications of
admitted UEs.
If the
IntraDlCompSwitch
check box is
selected, the
throughput of edge
UEs in intra-
eNodeB cells
increases but the
average throughput
of a cell may
decrease.
If the
InterDlCompDcsSwi
BTS3900:
tch or
V100R008C00
InterDlCompCbfSwi
BTS3900 LTE: Radio L
tch check box is
V100R008C00
selected, the
throughput of edge
UEs in inter-
eNodeB cells in a
cluster increases
but the average
throughput of a cell
may decrease.
If DL CoMP is
disabled, the
throughput of CEUs
decreases due to
co-channel
interference.

During UE paring in
BTS3900:
2x2 MU-MIMO, the
V100R008C00
cell throughput
BTS3900 LTE: Radio L
increases if the
V100R008C00
PSIC algorithm
switch is on.
InterRatMlbBlindHo
check box under
this parameter is
selected, inter-RAT
blind handovers are
triggered for load
sharing. This
reduces the
signaling for GAP
measurements but
decreases the
handover success
rate when blind-
handover
neighboring cells
are not properly
configured. If the
BTS3900:
InterRatMlbBlindHo
V100R008C00
check box under
BTS3900 LTE: Radio L
this parameter is
V100R008C00
deselected, GAP-
measurement-
based inter-RAT
handovers are
triggered for load
sharing. This
increases the
signaling overheads
for GAP
measurements but
ensures the
handover success
rate. If the
InterFreqMlbRedire
ct check box under
this parameter is
selected, UEs that
do not support
intra-site UL CoMP
is enabled, the
number of inter-site
CoMP UEs
increases and UL
CoMP performance
improves when
inter-site UL CoMP
is enabled in Cloud
BB scenarios.
UlCompRollbackSw
itch: If this switch is
on, the service drop
rate decreases in
strong interference
scenarios, but the
uplink throughput BTS3900:
also decreases. V100R008C01
Setting this switch BTS3900 LTE: Radio L
to off results in the V100R008C01
opposite effects.
UlJointReception3C
ellSwitch: If this
switch is off, each
UE supports UL
CoMP in at most
two cells. If this
switch is on, each
UE supports UL
CoMP in at most
three cells,
improving UL CoMP
performance
compared with UL
CoMP in two
cells.This switch
applies only to FDD

BTS3900:
If this switch is on,
V100R009C00
the downlink cell
BTS3900 LTE: Radio L
throughput
V100R009C00
increases.

If the
GLDynSpectrumSh
areSwitch option is BTS3900:
on, the E-UTRAN V100R009C00
cell can use more BTS3900 LTE: Radio L
spectrum V100R009C00
resources, and
therefore downlink
capacity improves.
If this switch is
turned on, load-
based adaptive
adjustment is
enabled, which
increases the
proportion of joint-
scheduling UEs and
improves user
experience when
the network load is
BTS3900:
light, and increases
V100R009C00
the proportion of
BTS3900 LTE: Radio L
independent-
V100R009C00
scheduling UEs and
ensures the
spectral efficiency
when the network
load is heavy. If this
switch is turned off,
load-based
adaptive
adjustment in the
adaptive
SFN/SDMA feature
cannot be enabled.
(CEUs) increase. If
this switch is turned
off, the uplink
coverage in
interference
scenarios
decreases
compared with that
when this switch is
turned on.
SmartIrcSwitch: If
this switch is turned
on, both the uplink
average throughput
and throughput at
the cell edge
increase. In
BTS3900:
addition, the service
V100R009C00
drop rate
BTS3900 LTE: Radio L
decreases. If this
V100R009C00
switch is turned off,
both the uplink
average throughput
and throughput at
the cell edge
decrease in
interference
scenarios
compared with that
when this switch is
turned on. In
addition, the service
drop rate increases.
MrcIrcAdaptivefor2
R: Compared with
the scenario where
this switch is turned
off, turning on this

BTS3900:
V100R009C00
None BTS3900 LTE: Radio L
V100R009C00
is on, the PDCCH
SDMA efficiency
increases but the
dynamic ACK
detection
performance
deteriorates. If this
switch is off, the
dynamic ACK
detection
performance
improves but the
PDCCH SDMA
efficiency
decreases.
SuperCombination
CellSwitch: If this
BTS3900:
switch is on, the
V100R009C00
super combination
BTS3900 LTE: Radio L
cell feature is
V100R009C00
enabled. If this
switch is off, the
super combination
cell feature is
disabled.
SfnDl2LoadLevelAd
ptSwitch: If this
switch is on, two
thresholds for
determining high
load and low load
are used for
adaptive
adjustment, leading
to stable UE
attribute in an SFN
cell. If this switch is
off, high and low
If this parameter is
set to OFF, the
number of false
alarms increases
may increase in
scenarios of strong
interference on the
PRACH. If this
parameter is set to
ON, the number of
false alarms in the
PRACH decreases, BTS3900:
random access V100R009C00
success rate, BTS3900 LTE: Radio L
handover success V100R009C00
rate,
resynchronization
rate, and RRC
reestablishment
success rate
increase. However,
UEs in areas with
weak coverage may
attempt to access
the network, which
decreases the RRC
setup success rate.

TM9Switch: Turning
on this switch
BTS3900:
increases average
V100R009C00
cell throughput.
BTS3900 LTE: Radio L
Turning off this
V100R009C00
switch has no
impact on network
performance.
This parameter
applies to lightly-
loaded networks. If
this parameter is
set to
ENB_BASED,
interference is
reduced in a lightly-
loaded cell and the
spectrum efficiency BTS3900:
is improved, and V100R009C00
the MCS is more BTS3900 LTE: Radio L
evenly distributed. If V100R009C00
this parameter is
set to
ECO_BASED, the
eCO-based
interference
randomization is
enabled and the
cell spectrum
efficiency is
improved.

BTS3900:
V100R008C01
None BTS3900 LTE: Radio L
V100R008C01
can more easily
measure
neighboring
frequencies with
high priorities, and
therefore these UEs
can preferentially
be handed over to
cells on these
neighboring
frequencies.
VoipMeasFreqPriS
witch: If this switch
is on, during the
measurements of
coverage-based
inter-frequency
BTS3900:
handovers for VoIP
V100R008C01
UEs, the
BTS3900 LTE: Radio L
frequencies to be
V100R008C01
measured are fixed.
In this case, VoIP
UEs can
preferentially be
handed over to
frequencies with
high priorities. This
mechanism applies
to scenarios where
operators require
UEs to be handed
over to low
frequencies with
good coverage, so
that the number of
handovers can be
reduced during
continuous UE
multiplexing mode
increases the
MCSs. However,
due to no DTX state
in multiplexing
mode, the CCE
aggregation level of
PDCCH data
cannot be
accurately
determined and the
PDCCH power
control cannot be
accurately
performed, which
reduces the
PDCCH reliability.
BTS3900:
As a result, the
V100R009C00
handover success
BTS3900 LTE: Radio L
rate, call drop rate,
V100R009C00
ping delay, and
PUCCH coverage
performance may
deteriorate, while
the cell throughput,
single user
throughput, and
perceptive rate may
increase. If the
TddAckFbModeCfg
OptSwitch is off, the
TDD HARQ-ACK
feedback mode is
not reconfigured
based on the
PDCCH load and
UE services. Most
UEs use the
immediately
determines whether
to perform a
coverage-based
inter-frequency
handover when
receiving a
measurement
report. This ensures
that UEs are
handed over in
time. If this
parameter is set to
BASEDONSIGNAL
STRENGTH, UEs
can be handed over
to the strongest
BTS3900:
neighboring cells.
V100R009C00
However, the
BTS3900 LTE: Radio L
waiting time puts off
V100R009C00
the handover,
increases the
handover failure
rate, and causes
service drops. If this
parameter is set to
BASEDONFREQP
RIORITY, the
possibility that UEs
are handed over to
neighboring cells
whose frequency
has a high priority
increases. This
helps these
neighboring cells
absorb more traffic,
but puts off the
Setting this
parameter to ON
BTS3900:
increases air
V100R010C00
interface overheads
BTS3900 LTE: Radio L
for broadcasting
V100R010C00
UTC in the LTE
system through
SIB16.
AbnUeSchSwitch:
Turning off this
switch has no
impact on network
performance. If this
switch is on,
scheduling of
abnormal UEs is
disabled in the
uplink and
downlink, and
resource efficiency BTS3900:
increases. As a V100R009C00
result, cell BTS3900 LTE: Radio L
throughput V100R009C00
increases in
scenarios where
resources are
insufficient.
However, the
scheduling delay
increases and
perceived
throughput
decreases for UEs
in weak coverage
areas.

Ssrd8T8RAlgoSwitc
h: If this switch is
on, increases the
average downlink BTS3900:
throughput in a V100R010C00
heavily loaded cell. BTS3900 LTE: Radio L
If a cell is lightly V100R010C00
loaded or soft split
multi-user pairing is
not required, set
this switch to off.
throughput
indicates that the
uplink coverage
improves.
InterBaseBandSwit
ch:Turning on this
switch enables
inter-BBP UL CoMP
in an SFN cell. This
further increases
the uplink CEU
throughput and the
average uplink
throughput of the
SFN cell. The
increase in the
uplink CEU BTS3900:
throughput V100R010C00
indicates that the BTS3900 LTE: Radio L
uplink coverage V100R010C00
improves.
ComCoverUlComp
Switch:Turning on
this switch
increases the uplink
CEU throughput
when multiple RF
modules provides
the same coverage
in an SFN cell and
the average uplink
throughput of the
SFN cell. The
increase in the
uplink CEU
throughput
indicates that the

If the
LowSpeedInterFreq
HoSwitch
parameter is set to
ON, low-speed UEs
are handed over to
inter-frequency BTS3900:
neighboring cells V100R010C00
with low-speed BTS3900 LTE: Radio L
frequencies, V100R010C00
ensuring that the
capacity of
networks dedicated
to high-speed
railways is not
occupied by UEs in
macro networks.
OutOfBandRelayS
witch: If this switch
is on, the number of
common UEs that
can access the cell
decreases, both the
total throughput of
common UEs in the
cell and the peak
throughput of a
single common UE
decrease (the
decrease rate is in
positive correlation
with the number of
BTS3900:
res