Beruflich Dokumente
Kultur Dokumente
(Values in RED are to be manually input and in GREEN are to picked from the list)
Supporting member properties (in mm) (Ref IS 808-1989 & SP-6 for details)
Max bolt
tf tw g D h2 h1 dia
16 8.9 80 400 32.8 334.4 22
Supported member properties (in mm) (Ref IS 808-1989 & SP-6 for details)
Max bolt
tf tw g1 D h2 h1 dia
12.5 6.9 65 250 27.95 194.1 22
Bolt Capacities
Capacity increase factor = MIN(640,0.7*800)/235 =560/235 = 2.4 (Cl 8.9.4.3 of IS 800)
Bolt cap. in Axial Tension, Tcap = 2.4*(1*120)*245/1000 = 70.6, Say = 70 kN
Bolt capacity in SINGLE Shear, Vcap = 2.4*(1*80)*314.2/1000 = 60.3, Say = 60 kN
Bolt capacity in DOUBLE shear = 2*60 = 120 kN
Forces in Bolts
Axial tension per bolt, Tcal = 0 kN
Max shear force per bolt, Vcal = 103.5/6 = 17.3 kN
Interaction check = (Tcal / Tcap + Vcal / Vcap) = (0/70+17.3/60) = 0.288 <= 1.4, PASS
b) Of Supporting member
Thickness of supporting member = 8.9 mm
Yield stress of the end plate = 250 N/mm^2
Bolt capacity in Bearing, Bcap = 2.4*(1*250)*(8.9*20)/1000 = 106.8, Say = 106 kN > 34.6kN, Pass
Plate cap. in Bearing, Bmcap = 1*(1*250)*(8.9*20)/1000 = 44.5, Say = 44 kN > 34.6kN, Pass
(Cl 8.9.4.4 of IS 800)
CHECK FOR FILLET WELD BEWEEN WEB OF SUPPORTED MEMBER AND END PLATE
Weld size considered 6 mm
Strength reduction factor for weld (0.8 for site weld, else 1) = 1
Weld strength (Cl 7.1.2 of IS 816-1969) = 110 N/mm^2
Weld strength per mm of weld = 1*110*6/SQRT(2)/1000 = 0.467 kN/mm
Length of weld required = 103.5/0.467 = 222 mm
Height of plate required based on weld length = 222/2+2*6 =123, say = 125 mm< 200mm, Okay
kN >= 50kN, Okay
mm , Okay
(Cl 8.9.4.3 of IS 800)