Beruflich Dokumente
Kultur Dokumente
Design Specifications
Blade Count: 16
Protrusions:
IADC Code92: M843
Make up Length (ft): 0
8 ½" DD5560 -A2
Design Features of this DuraDiamond® bit JSA (in2): 5.96
This DuraDiamond bit is designed to drill transitional formations from medium hard to hard. The
bit is intended for use on medium to high speed motors and has heavy set gauge protection.
General Description Body Material: Matrix
Matrix Gauge:(in) 4.600
Sharp straight blade front for greater shearing action.
Cutters in cone for high ROP and anti-coring. Total Gauge:(in) 4.600
Diamond grit optimized for specific lithology and rock strength.
Optimize hydraulics. Gauge Geometry: Straight
Gauge Comments:
Straight
TSP Tiled Profile: Short Taper - Deep
Tapered Cone
Passive Gauge Cutters
3 x 13mm RAPTOR
3 x 13mm RAPTOR
Recommended Operating
Parameters
Rotary Speed: PDM & Turbine
Flow(gpm): 350 - 700
WOB: Differential pressure dependent
Hydraulics
Ports
Total: 15
9 x /32"
6 x /32"
TFA (in²): 1.45
Other TFAs are available. Please check with engineering for
availability.
Contact your NOV Downhole Representative for recommended
operating parameters in your application. NOV Downhole reserves
the right to revise these specifications, based on advances and
improvements in technology.
This report is valid for 30 days from 20-Nov-2012