Beruflich Dokumente
Kultur Dokumente
OBJECTIVE SPECIFICATIONS
The Protectoseal Series 782 Air Dryer provides a simple, Sizes Available
relatively inexpensive means of extracting unwanted moisture Model No. Inlet Outlet
from make-up air. It is recommended for tanks and systems
where the installation of an expensive central air drying or 782T2 2" FNPT 2" FNPT
inert gas system cannot be justified. Incoming air (from nor- 782T3 3" FNPT 3" FNPT
mal venting or during liquid pump-out) must pass through a 782F2 2" Flange 2" Flange
highly efficient desiccant material before entering the tank. 782F3 3" Flange 3" Flange
The desiccant is capable of absorbing a considerable amount Dimensions
of moisture before it approaches its saturation point, where- Overall height - 291⁄ 2"
upon it can be either replaced or regenerated. Body diameter - 123⁄ 4"
TECHNIQUE Centerline of inlet to base - 43⁄ 8"
Centerline of outlet to base - 233⁄ 16"
The Protectoseal Series 782 Air Dryer is an ideal means of
drying tank air. Available with either 2" or 3" NPT or flanged 782T2 782T3 782F2 782F3
connections, it holds a 30# charge of silica gel in a perforated
Face of inlet to
stainless steel basket. The Air Dryer is less than 30" in over-
centerline of body 87⁄ 8" 91⁄ 4" 41⁄ 4" 31⁄ 8"
all height and the basket can be easily removed. Cover
Face of outlet to
removal is simplified by the use of a single wing nut fastener. centerline of body 161⁄ 8" 151⁄ 4" 141⁄ 2" 137⁄ 8"
Unusually low pressure drop through the desiccant is Materials of Construction
provided by the large diameter of the dryer and is further Body and Cover Assembly - Steel, 316 S.S. also available
enhanced by the use of Protectoseal Silica Gel No. 780S30 Basket Assembly - 316 S.S.
as the absorptive material. Screen - 316 S.S.
A humidity indicator is mounted on the outlet stream of air. It O-Ring Seal - Buna N
is calibrated in percentage of relative humidity and the indica- Polyvinyl Chloride (PVC) model also available. Refer to
tor background changes color as the humidity increases. This Spec Sheet No. V-PVC780; call factory or visit website
allows the plant operator to determine when the desiccant for details.
should be regenerated.
Shipping Weight - 180 lbs. (without desiccant)
HANDLE
HUMIDITY
INDICATOR
COVER
DESSICANT BASKET
MOIST AIR IN
www.protectoseal.com
Specifications Series 782
Storage Tank Air Dryer
Pipe-Away Pressure Vacuum Emergency Vent protects tanks Vent Line / In-Line Parallel Plate Combination Pressure / Vacuum
Relief Vent for applications that against rupture or explosion Flame Arrester is designed for Relief Vent & Flame Arrester
require hazardous vapors be resulting from excessive installation in open vent pipe or provides pressure and vacuum
processed into manifolded internal pressure caused by bleed lines from storage or pro- relief as well as protection from
piping and not released into the exposure to fires. cessing tanks. Suitable for NEC propagation of externally intro-
atmosphere. Group D (IEC Group IIA) vapors. duced flames. Suitable for NEC
Group D (IEC Group IIA) vapors.
PROTECTOSEAL
Safety Without Compromise
®
225 Foster Ave., Bensenville, IL 60106-1690
P 630.595.0800 F 630.595.8059
info@protectoseal.com www.protectoseal.com