Beruflich Dokumente
Kultur Dokumente
The following explains the theory behind some of the conventional nondestructive testing (NDT) services
provided by Industrial Support Services. Despite the fact that some of these techniques have been
available for a relatively long time, we are constantly striving to keep abreast of all the latest developments
in hardware and equipment in order that our clients may receive the best service possible. Our
commitment to fulfill all our clients' inspection requirements by providing an "all-round" service also means
that additional conventional techniques are being introduced and provided as required.
Radiography (RT)
A major advantage of the penetrating radiation method of NDT is its
inherent display of results in single or multi-dimensional graphical
images. RT is most sensitive to material changes along the
projection of the beam allowing thin cross-sectional discontinuities
(such as cracks) to be detected if their major surfaces are aligned
parallel to the beam path. RT can be used to detect internal
discontinuities in almost any material that is not too thick. RT is
based on the detection of differences in the transmission or
absorption of penetrating radiation by different parts of the object
being radiographed. Industrial Support Services offers RT
inspection services using both X-ray and gamma-ray sources,
depending on client or specific job requirements.
back to top
Microwave Testing
Is a non-contact NDT technique based on the laws of electromagnetism. The technique relies on the fact
that microwaves are reflected by electrically conducting surfaces/materials, but attenuated by dielectric
(nonconducting) ones. Based on this characteristic, the technique can be used to measure distances to
metallic surfaces, and the thickness of dielectric materials.
back to top