Beruflich Dokumente
Kultur Dokumente
===========================================================================
8467.21.00 HAMMERS, ROTARY, electropneumatic
Op. 01.01.2002 Dec. 01.01.2002 - TC 0106622
8467.21.00 DRILLS
Op. 01.01.2002 Dec. 01.01.2002 - TC 0106838
8467.21.00 DRILL KITS OR DRIVER DRILL KITS, including bits, whether or not
including ANY of the following:
(a) case;
(b) battery;
(c) battery charger;
(d) chuck key;
(e) torch;
(f) pencils;
(g) rules;
(h) tape measures;
(i) pliers;
(j) knives;
(k) handsaws;
(l) sockets;
(m) bit and socket holders;
(n) set squares;
(o) hand screwdrivers;
(p) nail and centre punches;
(q) any other goods not affecting the essential character of
the kit as a drill or driver drill
Op. 01.01.2002 Dec. 10.01.2002 - TC 0109357
8467.22.00 BANDSAWS
Op. 01.01.2002 Dec. 01.01.2002 - TC 0106624
8467.29.00 HAND TOOL SETS, PIPE FITTINGS, comprising ALL of the following:
(a) electro hydraulic hand tool;
(b) battery charger;
(c) batteries;
(d) clamping jaws;
(e) ball headed pins;
(f) pipe cutter;
(g) pipe gripper;
(h) expander;
(i) expander head;
(j) lubricant;
(k) cleaning brush;
(l) spanner;
(m) transport case
Op. 02.03.2009 Dec. 22.05.2009 - TC 0907081
8467.29.00 KITS, ROTARY TOOL, having a spindle speed NOT less than 18 000
r/min and a chuck capacity NOT greater than 3 mm, consisting of
ALL of the following:
(a) rotary tools;
(b) tool stands;
(c) vacuum adapters;
(d) flexible shafts;
(e) cutting guides;
(f) angle attachments;
(g) angle attachment shafts;
(h) spindle nuts;
(i) grinding stones;
(j) cut-off wheels;
(k) brushes;
(l) polishing wheels;
(m) polishing tips;
(n) sanding bands;
(o) drum sanders;
(p) sanding discs;
(q) flap wheels;
(r) diamond wheel points;
(s) cutters;
(t) bits;
(u) collet nuts;
(v) mandrels;
(w) collet wrenches;
(x) L keys;
(y) dressing stones;
(z) tool kit boxes
Op. 25.06.2007 Dec. 07.09.2007 - TC 0709854
8467.29.00 KITS, PAINT SCRAPER having an output NOT greater than 200 W,
consisting of BOTH of the following:
(a) cutting blades;
(b) kit boxes
Op. 14.11.2007 Dec. 29.01.2008 - TC 0719544
8467.29.00 EDGE BANDING MACHINES, veneer strip, hot air adhesive melting
Op. 01.01.2002 Dec. 02.01.2002 - TC 0106673
8467.29.00 ENGRAVING TOOLS, but NOT including such tools imported with ANY
interchangeable tools
Op. 01.01.2002 Dec. 02.01.2002 - TC 0106679
8467.29.00 GUNS, caulking, DC operated ONLY, but NOT including such tools
imported with EITHER of the following:
(a) battery charging devices;
(b) power adaptors
Op. 01.01.2002 Dec. 02.01.2002 - TC 0106686
8467.29.00 PLANES
Op. 01.01.2002 Dec. 02.01.2002 - TC 0106691
8467.29.00 WRENCHES
Op. 01.01.2002 Dec. 08.01.2002 - TC 0106821
8467.29.00 SANDERS
Op. 01.01.2002 Dec. 02.01.2002 - TC 0106834
8467.29.00 TAPPING MACHINES, metal thread, but NOT including such goods
imported with interchangeable tools
Op. 01.01.2002 Dec. 08.01.2002 - TC 0106900
8467.29.00 TOOLS, ELECTRO MECHANICAL, hand held, capable of at least two of the
following functions:
(a) air blowing;
(b) air vacuuming;
(c) shredders
but NOT including air blowers either incorporating or designed to
incorporate a heating element
Op. 01.01.2002 Dec. 02.01.2002 - TC 0109380
8467.81.00 CHAINSAWS, whether or not imported with guide bar, but NOT
including guide bars imported as initial spares or replacement
parts
Op. 24.08.1993 Dec. 18.03.1994 - TC 9307538
8467.91.00 PARTS, CHAINSAW AND POWERHEAD, excluding guide bars and electronic
ignition modules
Op. 29.07.1994 Dec. 31.01.1995 - TC 9406423
8474.20.00 PRESSES, ROLLER, hydraulic pneumatic, pressing force NOT less than
6 600 kN, having ANY of the following:
(a) welding lined rollers with autogenous wear surface;
(b) roll diameter NOT less than 1 400 mm;
(c) roll width NOT less than 1 100 mm;
(d) planetary gear drives, shaft mounted;
(e) static V separator
Op. 07.01.2003 Dec. 04.04.2003 - TC 0300367
8474.32.00 MIXING UNITS, TRIPLE BARREL DRUM, having ALL of the following:
(a) three heat transfer zones, being:
(i) convective;
(ii) radiant;
(iii) conductive;
(b) mixing capacity up to 450 t/h of virgin and recycled
asphalt and fines road base material, with a maximum of
50% being recycled material;
(c) manufactured from stainless steel UN standards 31000
and 31008
Op. 20.10.1998 Dec. 30.12.1998 - TC 9809287
8474.39.00 MIXING AND BATCHING LINE, DRY, plc, having ALL of the following:
(a) product dosers;
(b) vibrating check screens and/or weighers;
(c) fluid bed dryers;
(d) elevators and conveyors;
(e) batched material mixers;
(f) rotary baggers;
(g) bag feeders;
(h) palletisers;
(i) shrink wrappers
Op. 08.08.2005 Dec. 21.10.2005 - TC 0510476
8474.80.00 PLANT, FOUNDRY MOULD FORMING, GREEN SAND, comprising ALL of the
following:
(a) foundry mould formers;
(b) core setters;
(c) sand suppliers;
(d) mould transfer conveyors
Op. 16.01.2006 Dec. 21.04.2006 - TC 0602382
8474.80.00 PLANT, MOULDING, CONCRETE, having a gross weight NOT less than
30 t
Op. 03.05.2006 Dec. 21.07.2006 - TC 0607777
8474.80.00 DE-AIRING AND EXTRUSION MACHINES, BRICK AND TILE CLAY COLUMN
MAKING
Op. 13.03.2008 Dec. 30.05.2008 - TC 0803897
8474.80.00 PRODUCTION LINE, CLAY BRICKS AND PAVERS, comprising ALL of the
following:
(a) setting and unloading robots;
(b) pneumatic grippers;
(c) integrated computer controlled transferrers, dryers and
firers;
(d) hydraulic kiln car controllers;
(e) PLC production controllers;
(f) PLC tool changers
Op. 16.06.2004 Dec. 03.09.2004 - TC 0405777
8474.90.00 PARTS, DRILL RIG OR PILE DRIVER, SOIL AND CONCRETE MIXING CUTTER,
being cutter wheel heads
Op. 24.08.2009 Dec. 13.11.2009 - TC 0931106
8474.90.00 PARTS, CONCRETE MOULDING PLANT, FLAT ELEMENTS, being ANY of the
following:
(a) integrated pallet circulators;
(b) oscillating compactors;
(c) panel storers and transferors;
(d) panel support moulds;
(e) concrete spreaders;
(f) concrete spreader bridges;
(g) integrated panel moulding shutters and handlers;
(h) flat panel demoulders;
(i) shutter cleaners
Op. 24.07.2007 Dec. 09.10.2007 - TC 0711893
8474.90.00 PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of
the following:
(a) chassis axles and undercarriages;
(b) chassis;
(c) conveyor covers;
(d) conveyor head and tail drums;
(e) conveyor skirts;
(f) conveyor take ups;
(g) cover plates;
(h) discharge chutes;
(i) door locking brackets;
(j) drive couplings;
(k) drive coupling covers;
(l) drive guards;
(m) engine covers;
(n) engine sub-frames;
(o) feed trays;
(p) feeder outlets;
(q) feeder spring mounts;
(r) grizzly cartridges;
(s) head scrapers;
(t) hopper wing supports;
(u) idler frames;
(v) idlers;
(w) impact bars;
(x) inspection doors;
(y) jaw feed chutes;
(z) jaw positioning blocks;
(aa) main conveyor heads;
(ab) main conveyor tails;
Item 50 applies unless otherwise stated.
Tariff Description
===========================================================================
(ac) plain carry rolls;
(ad) rear wing cylinders;
(ae) removable sub-chassis;
(af) return to rolls;
(ag) return roller guards;
(ah) roll guards and brackets;
(ai) side conveyor trusses;
(aj) side rails and plates;
(ak) tail bearings;
(al) tail drums;
(am) tail scrapers;
(an) take up and motor mounts;
(ao) tanks;
(ap) track chassis axles;
(aq) track extension plates;
(ar) trainers;
(as) truss hinges;
(at) walkways;
(au) weight scale idlers
Op. 10.09.2007 Dec. 30.11.2007 - TC 0714693
8474.90.00 PARTS, ORE CRUSHERS AND/OR GRINDERS, TRACK MOUNTED, being ANY of
the following:
(a) crawler track units;
(b) track plates;
(c) wheels;
(d) rollers
Op. 21.11.2007 Dec. 01.02.2008 - TC 0719765
8474.90.00 PARTS, VERTICAL SPINDLE ROLLER MILL, being ANY of the following:
(a) grinding bowls;
(b) grinding plates;
(c) cover hoods;
(d) cover plates
Op. 10.01.2008 Dec. 28.03.2008 - TC 0800474
8474.90.00 PARTS, MINERAL SAND PROCESSING PLANT, TRACK MOUNTED, being track
side frames
Op. 21.02.2008 Dec. 28.04.2008 - TC 0802859
8474.90.00 PARTS, IMPACT HAMMER MILL, being rotors, comprising ALL of the
following:
(a) rotor shaft;
(b) rotor discs;
(c) hammer shafts
Op. 11.06.2008 Dec. 22.08.2008 - TC 0812065
8475.90.00 PARTS, MULTI SECTION GLASS FORMING MACHINE, being ANY of the
following:
(a) bed and uprights;
(b) timing drum bracket;
(c) overhead beam;
(d) manifold and detector beam;
(e) section frame;
(f) mould opening and closing mechanism;
(g) mould holder supporting mechanism;
(h) mould holder;
(i) funnel mechanism;
(j) funnel arms;
(k) baffle mechanism;
(l) baffle arms;
(m) constant cushion invert mechanism;
(n) neck ring mechanism;
(o) neck ring arms;
(p) vacuum bottom plate mechanism;
(q) vacuum bottom plate adaptor;
(r) blowhead mechanism;
(s) internal cooling blowhead arm;
(t) constant cushion take out mechanism;
(u) take out tong head;
(v) vertiflow blow mould cooling mechanism;
(w) plunger, plunger cooler, plunger mechanism;
(x) floating plunger positioner;
(y) change cartridge;
(z) delivery supporting mechanism
Op. 10.11.1997 Dec. 16.01.1998 - TC 9709919
8477.20.00 EXTRUDING MACHINES, PLASTIC BLOWN FILM, single screw, having ALL
of the following:
(a) extruder;
(b) control panel;
(c) die pack;
(d) airing blower;
(e) heat exchanger;
(f) 3 way valve;
(g) hopper;
(h) electrical controls
Op. 15.09.1997 Dec. 28.11.1997 - TC 9708140
8477.80.00 METERING AND DOSING SYSTEM, PLASTIC RESIN, including ALL of the
following:
(a) metering pumps;
(b) valve blocks;
(c) valves;
(d) ring piping;
(e) static mixers;
(f) shrinkage compensation units
Op. 14.05.2009 Dec. 31.07.2009 - TC 0916471
8477.80.00 EXTRUSION LINE, FLAT AND PROFILED SHEETS, plc, comprising All of
the following:
(a) gravimetric dosers;
(b) polymer feed pumps;
(c) coextruders;
(d) calenders;
(e) take off stations;
(f) circular saw cross cutters;
(g) bilateral stackers;
(h) sheet profiling stations
Op. 05.10.2005 Dec. 03.01.2006 - TC 0513495
8477.80.00 LOOP HANDLE CARRIER BAG MAKING LINE, comprising ALL of the
following:
(a) feeder sections;
(b) draw roll assembly;
(c) web tension adjuster;
(d) servomechanism;
(e) servomotor;
(f) cut-off length adjuster;
(g) operator panel;
(h) power control cabinet;
(i) half tube assembly;
(j) heat sealing station;
Item 50 applies unless otherwise stated.
Tariff Description
===========================================================================
(k) unwinding and folding station;
(l) roller system capture dancers;
(m) foldover and sealing station;
(n) gusseter;
(o) handle sealer;
(p) loop handle station;
(q) pre heating station;
(r) vacuum belt delivery station;
(s) laser pointer;
(t) automatic bag folding station
Op. 06.06.2008 Dec. 23.10.2008 - TC 0836495
8477.80.00 BAG MAKING LINES, CHECK-OUT CARRIER BAG, comprising ALL of the
following:
(a) bag making machine;
(b) unwinder;
(c) dancer;
(d) sealer;
(e) gusseter;
(f) web aligning control;
(g) print register control;
(h) handle puncher;
(i) stacking station
Op. 27.03.2001 Dec. 01.06.2001 - TC 0102681
8477.90.00 DIES, MANDRELS OR LATTICE BASKET EXTRUSION DIE HEADS, PLASTIC PIPE
EXTRUSION, extrusion output of 120 kg/h OR greater
Op. 01.01.2007 Dec. 16.11.2006 - TC 0614296
8477.90.00 PARTS FOR EXTRUDERS, cold feed pin barrel type, being ANY of the
following:
(a) roller hopper feed assemblies;
(b) hopper complete with liners;
(c) front barrel liners;
(d) rear barrel liners;
(e) front barrels with liners;
(f) rear barrels with liners;
(g) locating keys;
(h) collars;
(i) mixing pins
Op. 01.01.2007 Dec. 16.11.2006 - TC 0614297
8477.90.00 PARTS, EXTRUDING MACHINE, twin screw, being ANY of the following:
(a) barrels;
(b) screws;
(c) extrusion heads;
(d) dies;
(e) pins
Op. 01.01.2007 Dec. 16.11.2006 - TC 0614300