Beruflich Dokumente
Kultur Dokumente
SENS Scala2
SERVICE Manual
RV511/RV411 Contents
2. Convenient functions
- For Internal Camera (Option),
convenient usage of filming and
taking pictures
- Convenient connection with TV as
HDMI port is provided
If there are the Contents not included in this book, please refer to K-zone Service Manual
- This Document can not be used without Samsung's authorization -
- CONTENTS -
1. Precautions
1) General After-Sales Service Precautions.............................................................................................1-1
2) Safety Precautions.................................................................................................................................1-2
3) Ground....................................................................................................................................................1-3
4) Static Electricity Precautions.................................................................................................................1-3
4. Troubleshooting
1) General..................................................................................................................................................4-1
2) Debugging Flow Chart..........................................................................................................................4-2
3) System Diagnosis..................................................................................................................................4-4
4) Use of diagnostic program...................................................................................................................4-8
5) Hardware Troubleshooting..................................................................................................................4-13
6) CPU Fan Control................................................................................................................................4-22
7) Battery Use Time................................................................................................................................4-23
8) Etc........................................................................................................................................................4-28
5. Exploded view
1) Exploded view ....................................................................................................................................5-1
6. BOM
1) Main System.........................................................................................................................................6-1
- This Document can not be used without Samsung's authorization -
- CONTENTS -
8. References
1) Block Diagram.......................................................................................................................................8-2
2) Schamatic..............................................................................................................................................8-4
- This Document can not be used without Samsung's authorization -
1) Introduction
(1) High Performance PC
- Intel Arrandale Processor
- DDR III Memory
- Intel Calpella platform
- Wireless LAN, Bluetooth (option)
2-1
- This Document can not be used without Samsung's authorization -
2) Specification
Memory
Memory / Max. Memory Min. 1 GB ~ Max. 8GB
PC3-8500(1066MHz), Up to 4G (32bit System) , 8GB (64bit System)
Memory type
Dual Channel
Memory Modules 1GB,2GB,4GB SODIMM
Sockets 2-slot SODIMM's
Display and Graphics
LCD 14.0" LED HD (16:9, Glare),15.6 LED HD (16:9,Glare/non-glare)
2-2
- This Document can not be used without Samsung's authorization -
Item
GPU TDP ①15W ②12.5W
①Support 1.3c (*1080P : 480p,720p,1080i)
Maxresolutionfor HDMI
② Support 1.3a (*1080P : 480p,720p,1080i)
2-3
- This Document can not be used without Samsung's authorization -
Communications
LAN 10/100/1000 Mbps Ethernet
Chipset Reatek 8111E
Features RJ45 Output
I/O Interface
I/O Ports
USB Port 3 x USB 2.0 ports(NO Chargeable )
Video (CRT) Port 1
HDMI Port 1
Audio Jacks Headphone-out , MIC-in
2-4
- This Document can not be used without Samsung's authorization -
LAN RJ45
PC CardBus Slots no
Power 1x DC-in jack for AC adapter
Security Kensington Lock
Input Devices
87 / 100 (KOR, RUS, UKR, US)
Key board
88 / 101 (UK, FR, GM, SP)
AC Adapter AD-6019R
Output Power 60 W
Dimension 107.0 X 47.0 X 30 mm (W x H x D)
Weight (AC Adapter) Max. 295 g
Worldwide Compatibility Auto-sensing 100-240 VAC
Line Frequency 50 / 60Hz
Adapter Rating - Input 100 VAC ~ 240 VAC, 1.7 A
Adapter Rating - Output 19.0 VDC, 3.16 A
AC Adapter AD-9019S
Output Power 40W
Dimension 126 X 50 X 30 mm (W x H x D)
Weight (AC Adapter) Typ. 350g
Worldwide Compatibility Auto-sensing 100 - 240 VAC
2-5
- This Document can not be used without Samsung's authorization -
Opreating system
Software
2-6
- This Document can not be used without Samsung's authorization -
3) Key Feature
Suzhou2-M (R480E) Scala2 (RV411)
Pic.
LAN Gigabit
2-7
- This Document can not be used without Samsung's authorization -
MODEL
HDD 2.5 inch SATA 2.5 inch SATA 2.5 inch SATA
2-8
- This Document can not be used without Samsung's authorization -
Option
HDD
LCD
MEMORY
2-9
- This Document can not be used without Samsung's authorization -
CPU
W/LAN
2 - 10
- This Document can not be used without Samsung's authorization -
6) Product Feature
6)-1 System View
2 - 11
- This Document can not be used without Samsung's authorization -
2 - 12
- This Document can not be used without Samsung's authorization -
2 - 13
- This Document can not be used without Samsung's authorization -
2 - 14
- This Document can not be used without Samsung's authorization -
2 - 15
- This Document can not be used without Samsung's authorization -
2 - 16
- This Document can not be used without Samsung's authorization -
2 - 17
- This Document can not be used without Samsung's authorization -
2 - 18
- This Document can not be used without Samsung's authorization -
8) Software List:Driver
Software List:SW
2 - 19
- This Document can not be used without Samsung's authorization -
2 - 20
- This Document can not be used without Samsung's authorization -
Advanced
Intel(R) SpeedStep(TM)
=> This selects whether Intel® SpeedStep"! Thchnology is enabled or not.
Hyperthreading
=> This selects whether Intel® CPU performance will improve.
Legacy OS Boot
=> Select Enable to attempt Legacy OS Boot only.
=> Select Disabled to attempt EFI Boot first, Legacy OS Boot Second.
Legacy USB Support
=> Enable support for Legacy Universal Serial Bus.
Large Disk Access Mode
=> UNIX, Novell NetWare or other O/S, select "Other".
AHCI Mode Control
=> Select a AHCI mode always enabled or disabled.
EDB (Execute Disable Bit)
=> supports the Data Execution Prevention (DEP) feature. DEP is a set of H/W & S/W technologies
that perform additional checks on memory to help prevent malicious code from running on a system.
Internal LAN
=> "Enabled" will allow the internal LAN to operate correctly.
Touch Pad Mouse
=> "Disabled" prevents installed Touch Pad mouse from functioning, but frees up IRQ 12."Enabled"
forces the Touch Pad mouse to be enabled.
Touch Pad LED
=> "Auto" means that LED will turn on when you touch the pad.
"Touchpad" means that LED operates according to Touchpad's status.
"Always off" means that LED always turns off.
CPU Power Saving Mode
=> "Enabled" will decrease system power consumption.
Fan Silent Mode
In silent mode, "Low" will spin a system fan at a low speed and minimize the frequency of stopping
it. "Auto" will repeat spinning it and stopping it.
USB S3 Wake-up
=> Select Enabled to support that system can be waked up from ACPI S3 state by USB activities.
USB Charge In Sleep Mode
=> "Enabled" means that the system supports the USB charge feature at the port which has the
special icon, in the sleep mode."Disabled" means that the system doesn't support the USB charge
feature in the sleep mode.
Battery Life Cycle Extension
=> "Enabled" means that the system will charge the battery up to 80% for extending the battery life
cycle."Disabled" means that the system will charge the battery up to 100%
2 - 21
- This Document can not be used without Samsung's authorization -
Purchased Date
=> Purchased date is displayed after 10 times boot.
2 - 22
- This Document can not be used without Samsung's authorization -
Security
2 - 23
- This Document can not be used without Samsung's authorization -
Boot
2 - 24
- This Document can not be used without Samsung's authorization -
2 - 25
- This Document can not be used without Samsung's authorization -
Exit
2 - 26
- This Document can not be used without Samsung's authorization -
2 - 27
- This Document can not be used without Samsung's authorization -
2 - 28
- This Document can not be used without Samsung's authorization -
2 - 29
- This Document can not be used without Samsung's authorization -
2 - 30
- This Document can not be used without Samsung's authorization -
5. Exploded View
SYSTEM
T0001
I0009
M0001
G0003
I0002
I0001 M0008
M3004
W3006
M3005
W3003
I0005
D1002
W3007
B0001
B0101 G0011
B0100
5- 1
- This Document can not be used without Samsung's authorization -
5. Exploded View
ASSY-LCD
K0102
K0101
K0002
K0201
K4001
I0003
K3001
K4002
K1001
K3002
K2001
I0013
K2002
K0001
5- 2
- This Document can not be used without Samsung's authorization -
5. Exploded View
UNIT-HOSUNG_TOP
T0407
T0101
K0101
T0001
T0302
K0101
T2000
5-3
- This Document can not be used without Samsung's authorization -
5. Exploded View
UNIT-HOSUNG_BOTTOM
B0501
B0302
B0303
B0001
B0010
B0402
B0009
B0403
B0010
5- 4
- This Document can not be used without Samsung's authorization -
5. Exploded View
Unit-ODD
D2000
D1002
D3000
5- 5
- This Document can not be used without Samsung's authorization -
Main
System
4. Remove screws fixed up Memory&HDD-Door..
- M2.0xL3 : 1EA (Red)
5.pull the HDD&Memory door as the arrow show
and then remove the door.
3-1
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
7. Remove the screws of the Bottom.
- M2.6xL8 : 17EA (Red)
Main
System 9 . Remove the HDD Screw.
-M2.0x3:1EA(Red)
3-2
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
11. Lift up the Bottom (Top cover)part.
[Caution]
Make sure that every screw of the Bottom have
been removed.
And oo much force can damage to the
Bottome(Top
cover)part.
Main
System
13.Remove thetouch-pad board Screws.
- M2.0xL3 : 2EA (Red)
3-3
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
15. Remove USB-Power Board screws.
- M2.0xL3 : 1EA (Red)
16.Remove the HSPA screws.
- M2.0xL3 : 2EA (Yellow)
17.Separate all the small boards.
Main
System
20. Separate the KBD-CABLE
3-4
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
23. Turn the screwdriver in the direction of
anti-clockwise and open CPU socket.
And then, hold up the CPU
Main
System
3-5
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
1. Remove the Screw from the
positions indicated by the arrows in the
Figure, then remove the UNIT-HOUSING-TOP.
- M2xL4(6001-001649) :4 EA
- M2xL4(6001-001649) :4 EA
LCD
Ass'y
*Caution:
Do not separate the LCD Front with excessive
force.
3-6
- This Document can not be used without Samsung's authorization -
Part
Figure Description
Name
4. Remove the screws like this and
separate the hinge part.
- M2xL4(6001-001649) :4 EA
LCD
Ass'y
-M2xL3(6001-001650) :6 EA (Red)
3-7
- This Document can not be used without Samsung's authorization -
3-8
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
1) General
4-1
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-2
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-3
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
3) System Diagnosis
(1) System Diagnostic Card
The Diagnostic Card shows the system operations during the POST (Power On Self Test) in a
2 digit hexadecimal number by connecting the cable to the 10 pin connector beside the memory slot
after separating the Top part. The card is used to evaluate the reason of the malfunction without
disassembling the system when the system malfunctions and to test if the system operates normally
after replacing a defective FRU.
30h BIOSPSM
4-4
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-5
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
98h 1-2 Search for option ROMs. One long, two short beeps on
99h Check for SMART Drive
9Ch Set up Power Management
9Dh Initialize security engine
9Eh Enable hardware interrupts
9Fh Determine number of ATA and SCSI drives
A0h Set time of day
A2h Check key lock
A4h Initialize Typematic rate
A8h Erase F2 prompt
AAh Scan for F2 key stroke
ACh Enter SETUP
AEh Clear Boot flag
B0h Check for errors
B2h POST done - prepare to boot operating system
B5h Terminate QuietBoot
B6h Check password (optional)
B7h Initialize ACPI BIOS
B9h Prepare Boot
BAh Initialize DMI parameters
BCh Clear parity checkers
BDh Display Multi Boot menu
BEh Clear screen (optional)
BFh Check virus and backup reminders
C0h Try to boot with INT 19
C1h Initialize POST Error Manager
C2h Initialize error logging
C3h Initialize error display function
C4h Install the IRQ vectors
C5h PnPnd dual CMOS
C6h pciBusDriver entry
E0h BDS entry
E3h First Legacy BIOS Task table for legacy reset
E4h Last Legacy BIOS Tack before hand off to UEFI/DXE(
4-6
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-7
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-8
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4-9
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 10
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 11
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 12
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
5) Hardware Troubleshooting
For the procedures to disassemble each part, refer to the descriptions of Chapter 3, “Disassembly and
Reassembly”.
◆ LCD Related Troubles
1. The screen is dark or the colors of the screen are distorted.
→ Check the connection status between the LCD module and the LCD cable, between the LCD
cable and the mainboard LCD connector.
→ Replace the LCD cable.
→ Check if there is a part of the LCD that is bent or broken due to impact.
4 - 13
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
6. Although system power is supplied, the system does not boot or immediately turns off after being
turned on.
→ Since this may be a short circuit in the system, disconnect the power immediately, disassemble
the system and check if there are any conducting alien objects such as a screw inside.
→ Check the connection status between the CPU and the RHE.
→ Replace the memory module and check if it is out of order.
→ Reset the RTC Reset terminal next to the memory socket.
Remove RTC cabel from RTC connector
Connect the two pad of the cap for a while
4 - 14
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 15
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 16
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
12. The battery is not charged or the battery charge LED malfunctions.
→ Check the standard voltage of the adapter.
→ Check if the battery is defective.
→ Replace the mainboard
.
4 - 17
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 18
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
18. The "To enter BIOS SETUP, press <F2>. To continue, press <F1>." message appears.
→ This may happen when the BIOS settings are different from the system environment. In this
case, setup the BIOS according to your system environment.
→ Press <F2> to enter the BIOS SETUP.
→ Check if the date and time are correct in the BIOS SETUP.
→ Save the settings and restart the system.
21. I cannot boot up the computer with a USB floppy drive or from USB memory.
→ Check if the diskette is bootable.
→ This may happen when the booting priority of the device is low. In this case, change the
booting priority in the BIOS SETUP.
4 - 19
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 20
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 21
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 22
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 23
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 24
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
4 - 25
- This Document can not be used without Samsung's authorization -
4. Troubleshooting
1. Generally, the battery usage time in advertisements by notebook manufacturers refers to the
maximum battery use time. Since the system specifications and the usage environment may differ,
the user's battery usage time may differ from the advertisement even if there is no problem with
the system.
3. If a customer complains about the battery usage time, let them know that the battery usage time
may differ depending on the model specifications and the usage environment and recommend
the following usage environment for longer battery time.
a. Use the company's power-saving program, BatteryManager, and set BatteryManager to
Maximum Battery Mode.
b. LCD brightness: Set to the minimum level as long as the user does not experience
inconvenience.
c. Disable unnecessary devices
: Turn the wireless LAN R/F switch off and disable USB devices (DMB, fingerprint recognition
and Bluetooth)
4 - 26
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다. -
- This Document can not be used without Samsung's authorization. -
4. Trouble shooting
4 – 4. Diagnosis application
1. After copying Windiag4 in any folder, OperatorInterface.exe.
Windiag4
2. Test item information : IF Fail item appeared, Item color turn be RED
4. Trouble shooting
4-5. Pyxis
- After you boot using the Dos bootable device, Select the menu that you want to execute.
1) Top
1 TOUCHPAD FFC
7-1
- This Document can not be used without Samsung's authorization -
2) Top
1 LCD CABLE
2 SPEAKER CABLE
3 WIRLESS ANTENNA CABLE
4 HSPA ANTENNA CABLE
5 HSPA board cable
6 USB&Power sub board cable
7-2
- This Document can not be used without Samsung's authorization -
3) Top
speaker
speaker cable speaker
7-3
- This Document can not be used without Samsung's authorization -
4) LCD
WLAN
HSPA WLAN
WLAN CABLE
HSPA CABLE
WLAN CABLE
HSPA CABLE
LCD&CAMERA CABLE HSPA
7-4
Main System
SEC code Location Qty's Parts Name Description Service
0902-002594 P6000 1 IC-MICROPROCESSOR CP80617004170AF,1.86GHz,PGA,988P, SA
1105-002056 1G_R10 1 IC-DRAM MODULE M471B2873EH1-CF8,DDR3 SDRAM,1GBSA
1105-002116 1G_R10 1 IC-DRAM MODULE M471B2873FHS-CF8,DDR3 SODIMM,1GSA
BA31-00098C FAN-CPU 1 FAN-CPU KSB0705HA-AJ2L,JINMAO,PLASTIC, SESA
BA39-00926A HDD CABLE 1 CBF HARNESS-HDD BLOOMINGTON,WIRE,-,12P,L40mm,BL SA
1. Precautions
(2) Make sure to disconnect the power cord from the wall outlet before repairing the product.
(especially for after-sales service of electric parts)
☞ There is a danger of electric shock.
(3) Do not let customers plug several electric home appliances into a single wall outlet at the same
time.
☞ There is a danger of fire due to overheating.
(4) Check if the power plug or wall outlet are damaged in any way.
☞ If a defect is found, repair or replace it immediately. (There is a danger of electric shock or fire)
(5) Make sure that it is properly grounded. (Check the ground of the wall outlet)
☞ Electricity leakage may cause electric shock.
(7) Check the assembly status of the product after the after-sales service.
☞ The assembly status of the product must be the same as before the after-sales service.
(8) Unplug the power cord holding the power plug (and not the cord).
☞ If the cord is disconnected, it may cause electric shock or fire.
(10) Keep the product away from heating devices such as heaters.
☞ Exposure to heaters may cause deformation of the product or fire.
1-1
- This Document can not be used without Samsung's authorization -
1. Precautions
2) Safety Precautions
(1) EMI
This device has been registered regarding EMI for residential use. It can be used in all areas.
1. When handling an LSI or MSI, make sure your body is grounded through a few mega-ohms
of resistance. In addition, wear gloves and a jacket made of cotton and not of synthetic fibers
that easily generate static electricity.
2. When repairing the product, place a conductive material (e.g. aluminum foil) grounded to the
earth on the worktable.
3. You must use a soldering iron without a leakage current.
4. Do not touch the pin of an IC and carefully insert the IC into the black plastic package.
5. When inserting an IC into a PCB, be careful with the direction of the IC. When installing an
IC in the wrong direction, it might become damaged.
6. When carrying an IC, package the IC with conducting material such as aluminum foil or
conducting sponge so as to keep the voltage level of each of the terminals the same.
7. Since the storage temperature of an IC is between -20 ~ +70 degrees, keep it at room
temperature, if possible.
8. When installing or removing a device from a PCB or installing or removing a board, you
must disconnect the power before taking any action.
9. When soldering an IC, solder it in as short a time as possible so that unnecessary heat is
not applied to the device.
10. Avoid leaving excessive amounts of flux within a custom IC or between the pins when soldering
a custom IC.
11. Take care to not damage the board when installing or separating an Option Board.
12. Take care to not break the printed circuit pattern on the PCB when separate an IC.
1-2
- This Document can not be used without Samsung's authorization -
1. Precautions
3) Ground
The product must be grounded to protect it from static electricity and other dangers. When using a
multitap, please use a multitap with a ground terminal only.
If you use a 220V wall outlet with a ground terminal, you do not need to ground it additionally. Avoid
using wall outlets if they are not grounded even if they have a ground terminal.
To ground the product, connect the ground to an exclusive ground terminal or metal water pipe.
Connect the ground cable to the ground terminal at the rear of the main body. To ground the product,
connect the ground terminal of the product to a metal water pipe, wall outlet or exclusive ground terminal
with an electric wire equal to or thicker than #18.
Never ground the product to a PVC water pipe, phone line, TV, radio antenna, aluminum window or
gas pipe, because this does not actually ground the product and may be dangerous.
1-3